Re:Re: Network Settings GUI

Re:Re: Network Settings GUI

[xiuzhi]

[-- Attachment #1: Type: text/plain, Size: 1102 bytes --]

Hi Derick,
    
Message: 4
Date: Fri, 14 Jun 2019 10:49:36 -0500
From: Derick <derick.montague@gmail.com>
To: Ratan Gupta <ratagupt@linux.vnet.ibm.com>, Jandra A
	<jandraara@gmail.com>
Cc: OpenBMC Maillist <openbmc@lists.ozlabs.org>
Subject: Re: Network Settings GUI
Message-ID:
	<CAOUmYFRphf6EEb9zbK_0O8BXgytghrZw=Wa9rH2LsQaWOKEgPw@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

>> Is the GUI specific for IBM, if not then I know google is planning to support the IPv6 and the gui should be at par with other available stack(AMI/ATEN).

>We have presented the design to the community continuously for quite some time.
>We are not hearing that this is needed in the GUI from customers or
the community. We dorealize there is support in other stacks, but we have not heard fromany users that they use it or plan to use it. It wold be helpful to know that the expectations are. Is Victor Hu the person that is talking to Google about their support need and expectations?

IPV6 is one of the functions  urgently need by Lenovo Commercial Server Products. 


Best,
Xiuzhi

[-- Attachment #2: Type: text/html, Size: 1287 bytes --]

Re: Re: Network Settings GUI

[Derick]

> IPV6 is one of the functions  urgently need by Lenovo Commercial Server Products.

Thank you for your response! What does urgent mean, is there a
timeframe? Does your
team have front-end development resources to implement the design? We
have a design that can be implemented, but we are not planning to
implement IPv6
in the GUI right away based on our current priorities. If someone else
wants to implement the design, we can review and provide feedback. I
believe the backend functionality is complete.

Re: Re: Network Settings GUI

[Jandra A]

[-- Attachment #1: Type: text/plain, Size: 1144 bytes --]

>
> IPV6 is one of the functions  urgently need by Lenovo Commercial Server
> Products.


We have a design that can be implemented, but we are not planning to
> implement IPv6 in the GUI right away based on our current priorities.


To provide a design to be implemented for supporting IPV6, we would also
need to know if the expectation and use case is for supporting both IPV4
and IPV6 on a single interface at the same time or if a user would have to
select one or the other. Once we have this information, we can provide a
design.



On Tue, Jun 18, 2019 at 10:51 AM Derick <derick.montague@gmail.com> wrote:

> > IPV6 is one of the functions  urgently need by Lenovo Commercial Server
> Products.
>
> Thank you for your response! What does urgent mean, is there a
> timeframe? Does your
> team have front-end development resources to implement the design? We
> have a design that can be implemented, but we are not planning to
> implement IPv6
> in the GUI right away based on our current priorities. If someone else
> wants to implement the design, we can review and provide feedback. I
> believe the backend functionality is complete.
>

[-- Attachment #2: Type: text/html, Size: 1836 bytes --]

Re: Re: Network Settings GUI

[xiuzhi]

[-- Attachment #1: Type: text/plain, Size: 1826 bytes --]

Hi Jandra,Derick,
   The IPV6 webui should support both IPV4 and IPV6 on a single interface at the same time and users can set IPV4 and IPV6 on the same network webpage from Lenovo test cases. 
  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do  front-end development to implement your design .  It would be best if the IPV6 feature could be achieved in one to two months .
  
Best,
Xiuzhi
------------------ Original ------------------
From:  "Jandra A";<jandraara@gmail.com>;
Send time: Tuesday, Jun 18, 2019 11:55 PM
To: "Derick"<derick.montague@gmail.com>; 
Cc: "xiuzhi"<1450335857@qq.com>; "openbmc"<openbmc@lists.ozlabs.org>; 
Subject:  Re: Re: Network Settings GUI



IPV6 is one of the functions  urgently need by Lenovo Commercial Server Products. 
We have a design that can be implemented, but we are not planning to implement IPv6 in the GUI right away based on our current priorities.

To provide a design to be implemented for supporting IPV6, we would also need to know if the expectation and use case is for supporting both IPV4 and IPV6 on a single interface at the same time or if a user would have to select one or the other. Once we have this information, we can provide a design. 


 


On Tue, Jun 18, 2019 at 10:51 AM Derick <derick.montague@gmail.com> wrote:

> IPV6 is one of the functions  urgently need by Lenovo Commercial Server Products.
 
 Thank you for your response! What does urgent mean, is there a
 timeframe? Does your
 team have  resources to implement the design? We
 have a design that can be implemented, but we are not planning to
 implement IPv6
 in the GUI right away based on our current priorities. If someone else
 wants to implement the design, we can review and provide feedback. I
 believe the backend functionality is complete.

[-- Attachment #2: Type: text/html, Size: 2947 bytes --]

Re: Re: Network Settings GUI

[Derick]

> The IPV6 webui should support both IPV4 and IPV6 on a single interface at the same time and users can set IPV4 and IPV6 on the same network webpage from Lenovo test cases.

Thank you!

>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do  front-end development to implement your design .  It would be best if the IPV6 feature could be achieved in one to two months.

It would be great if she were able to join our GUI Community
workgroup. It's every other Wednesday at 10:00 Central Time. We use
these to discuss all the GUI issues. Where are you located?

GUI Community Workgroup Wiki:
https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group

Re: Re: Network Settings GUI

[xiuzhi]

[-- Attachment #1: Type: text/plain, Size: 830 bytes --]

Hi Derick,
>> The IPV6 webui should support both IPV4 and IPV6 on a single interface at the same time and users can set IPV4 and IPV6 on the same network webpage from Lenovo test cases.

>Thank you!

>>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do  front-end  to implement your design .  It would be best if the IPV6 feature could be achieved in one to two months.

>It would be great if she were able to join our GUI Community
workgroup. It's every other Wednesday at 10:00 Central Time. We use
these to discuss all the GUI issues. Where are you located?
  I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>GUI Community Workgroup Wiki:
https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group



Best,
Xiuzhi

[-- Attachment #2: Type: text/html, Size: 1069 bytes --]

Re: Re: Network Settings GUI

[Jandra A]

[-- Attachment #1: Type: text/plain, Size: 1425 bytes --]

Hi Xiuzhi and Ruixia,

It would be great to set some time to align on the requirements from design
and how to work together so that your team can start on the so front-end
development.

Like Derick said, we meet every other Wednesday at 10:00 Central time to
discuss GUI issues, with the next one being next Wednesday (July 3rd).
Hopefully you can make that.

If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
Wednesday (June 26th) or Friday (June 28th). Please let me know.

Regards,

On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:

> Hi Derick,
> >> The IPV6 webui should support both IPV4 and IPV6 on a single interface
> at the same time and users can set IPV4 and IPV6 on the same network
> webpage from Lenovo test cases.
>
> >Thank you!
>
> >>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do
> front-end  to implement your design .  It would be best if the IPV6 feature
> could be achieved in one to two months.
>
> >It would be great if she were able to join our GUI Community
> workgroup. It's every other Wednesday at 10:00 Central Time. We use
> these to discuss all the GUI issues. Where are you located?
>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing
> Time (Wednesday 10:00 am Central Daylight Time),isn't it?
> >GUI Community Workgroup Wiki:
> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>
> Best,
> Xiuzhi
>

[-- Attachment #2: Type: text/html, Size: 2121 bytes --]

Re:Re: Re: Network Settings GUI

[孙瑞霞]

[-- Attachment #1: Type: text/plain, Size: 1744 bytes --]

Hi,all,
I will be glad to meet at 7:00AM Central time this Wednesday (June 26th).


Ruixia,Sun




发件人："Jandra A" <jandraara@gmail.com>
发送日期：2019-06-25 00:51:39
收件人：xiuzhi <1450335857@qq.com>
抄送人：Derick <derick.montague@gmail.com>,openbmc <openbmc@lists.ozlabs.org>,rxsun <rxsun@zd-tech.com.cn>
主题：Re: Re: Network Settings GUI

Hi Xiuzhi and Ruixia, 


It would be great to set some time to align on the requirements from design and how to work together so that your team can start on the so front-end development.  

Like Derick said, we meet every other Wednesday at 10:00 Central time to discuss GUI issues, with the next one being next Wednesday (July 3rd). Hopefully you can make that. 


If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this Wednesday (June 26th) or Friday (June 28th). Please let me know. 


Regards,


On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:

Hi Derick,
>> The IPV6 webui should support both IPV4 and IPV6 on a single interface at the same time and users can set IPV4 and IPV6 on the same network webpage from Lenovo test cases.

>Thank you!

>>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do  front-end  to implement your design .  It would be best if the IPV6 feature could be achieved in one to two months.

>It would be great if she were able to join our GUI Community
workgroup. It's every other Wednesday at 10:00 Central Time. We use
these to discuss all the GUI issues. Where are you located?
  I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>GUI Community Workgroup Wiki:
https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group



Best,
Xiuzhi

[-- Attachment #2: Type: text/html, Size: 2872 bytes --]

Re: Re: Re: Network Settings GUI

[Jandra A]

[-- Attachment #1: Type: text/plain, Size: 2111 bytes --]

Great, let's meet using my webex https://ibm.webex.com/meet/jandra.aranguren I
will send you an invite as well.

On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

> Hi,all,
> I will be glad to meet at 7:00AM Central time this Wednesday (June 26th).
>
> Ruixia,Sun
>
>
>
> 发件人："Jandra A" <jandraara@gmail.com>
> 发送日期：2019-06-25 00:51:39
> 收件人：xiuzhi <1450335857@qq.com>
> 抄送人：Derick <derick.montague@gmail.com>,openbmc <openbmc@lists.ozlabs.org>,rxsun
> <rxsun@zd-tech.com.cn>
> 主题：Re: Re: Network Settings GUI
>
> Hi Xiuzhi and Ruixia,
>
> It would be great to set some time to align on the requirements from
> design and how to work together so that your team can start on the so
> front-end development.
>
> Like Derick said, we meet every other Wednesday at 10:00 Central time to
> discuss GUI issues, with the next one being next Wednesday (July 3rd).
> Hopefully you can make that.
>
> If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
> Wednesday (June 26th) or Friday (June 28th). Please let me know.
>
> Regards,
>
> On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:
>
>> Hi Derick,
>> >> The IPV6 webui should support both IPV4 and IPV6 on a single interface
>> at the same time and users can set IPV4 and IPV6 on the same network
>> webpage from Lenovo test cases.
>>
>> >Thank you!
>>
>> >>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do
>> front-end  to implement your design .  It would be best if the IPV6 feature
>> could be achieved in one to two months.
>>
>> >It would be great if she were able to join our GUI Community
>> workgroup. It's every other Wednesday at 10:00 Central Time. We use
>> these to discuss all the GUI issues. Where are you located?
>>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing
>> Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>> >GUI Community Workgroup Wiki:
>> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>
>> Best,
>> Xiuzhi
>>
>

[-- Attachment #2: Type: text/html, Size: 3893 bytes --]

Re: Network Settings GUI

[孙瑞霞]

[-- Attachment #1: Type: text/html, Size: 7735 bytes --]

Re: Network Settings GUI

[Jandra A]

[-- Attachment #1: Type: text/plain, Size: 4447 bytes --]

Ruixia -- I am waiting on a couple of responses from our backend team to be
able to provide a design that aligns with how the functionality is
developed.

Ratan -- I'm helping create the design mockup for including IPV6 in the
Network settings panel so that Lenovo can do the front-end implementation.
Do you know if the work your team was doing for this will be merged to the
master soon?

I have some questions I am hoping you can help answer for this IPV6 design:
- What happens to zeroconf when both IPV4 and IPV6 are enabled? Does it try
to assign an IP address to both (in the case that DHCP doesn't give either)
or does it only assign either an IPV4 IP address or an IPV6 IP address?
- What is the format of IPV6 DNS servers? Is that also in the format of an
IPV6 IP address?

I have built the latest openbmc project image by adding the option "ipv6"
> in the term DISTRO_FEATURES_DEFAULT in the file
> /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping the
> openbmc  IPV6 IP successfully, but cannot login to it by openssh command.
> It seemed that there are some works on openbmc embedded OS to support IPV6.
> Another issue from Ruixia is the IPV6 Dbus Interfaces design, I found
> there are some IPV6 rest-Dbus or Redfish interfaces on yaml files
> available. I don' t know is it enough to the IPV6 webui.


Ratan, would you be able to help Ruixia and Xiuzhi with this?

Regards,
Jandra Aranguren


On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

> hi，
> After the meeting of last week，I was expecting the email about ipv6 ui
> designing and ipv6 interface with web server ，when will I receive it？Should
> we have another meeting this week？
> best regard！
>
> ruixia，sun
>
>
> 孙瑞霞
> 邮箱：rxsun@zd-tech.com.cn
>
> <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>
> 签名由 网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
> On 06/25/2019 23:25, Jandra A <jandraara@gmail.com> wrote:
>
> Great, let's meet using my webex
> https://ibm.webex.com/meet/jandra.aranguren I will send you an invite as
> well.
>
> On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>
>> Hi,all,
>> I will be glad to meet at 7:00AM Central time this Wednesday (June 26th).
>>
>> Ruixia,Sun
>>
>>
>>
>> 发件人："Jandra A" <jandraara@gmail.com>
>> 发送日期：2019-06-25 00:51:39
>> 收件人：xiuzhi <1450335857@qq.com>
>> 抄送人：Derick <derick.montague@gmail.com>,openbmc <openbmc@lists.ozlabs.org>,rxsun
>> <rxsun@zd-tech.com.cn>
>> 主题：Re: Re: Network Settings GUI
>>
>> Hi Xiuzhi and Ruixia,
>>
>> It would be great to set some time to align on the requirements from
>> design and how to work together so that your team can start on the so
>> front-end development.
>>
>> Like Derick said, we meet every other Wednesday at 10:00 Central time to
>> discuss GUI issues, with the next one being next Wednesday (July 3rd).
>> Hopefully you can make that.
>>
>> If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
>> Wednesday (June 26th) or Friday (June 28th). Please let me know.
>>
>> Regards,
>>
>> On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:
>>
>>> Hi Derick,
>>> >> The IPV6 webui should support both IPV4 and IPV6 on a single
>>> interface at the same time and users can set IPV4 and IPV6 on the same
>>> network webpage from Lenovo test cases.
>>>
>>> >Thank you!
>>>
>>> >>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do
>>> front-end  to implement your design .  It would be best if the IPV6 feature
>>> could be achieved in one to two months.
>>>
>>> >It would be great if she were able to join our GUI Community
>>> workgroup. It's every other Wednesday at 10:00 Central Time. We use
>>> these to discuss all the GUI issues. Where are you located?
>>>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing
>>> Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>>> >GUI Community Workgroup Wiki:
>>> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>
>>> Best,
>>> Xiuzhi
>>>
>>

[-- Attachment #2: Type: text/html, Size: 9766 bytes --]

Re: Network Settings GUI

[孙瑞霞]

[-- Attachment #1: Type: text/plain, Size: 6056 bytes --]

Hi，

The following item is expected,

  * In the case that DHCP doesn't give either， both IPV4 and IPV6 are
    enabled.

  * In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.

  * IPV6 DNS servers  is in the format of an IPV6 IP address.

it will be similar with the picture below, maybe.


Best regard, thanks.

ruixia,sun.


在 2019/7/1 下午11:26, Jandra A 写道:
> Ruixia -- I am waiting on a couple of responses from our backend team 
> to be able to provide a design that aligns with how the functionality 
> is developed.
>
> Ratan -- I'm helping create the design mockup for including IPV6 in 
> the Network settings panel so that Lenovo can do the front-end 
> implementation. Do you know if the work your team was doing for this 
> will be merged to the master soon?
>
> I have some questions I am hoping you can help answer for this IPV6 
> design:
> - What happens to zeroconf when both IPV4 and IPV6 are enabled? Does 
> it try to assign an IP address to both (in the case that DHCP doesn't 
> give either) or does it only assign either an IPV4 IP address or an 
> IPV6 IP address?
> - What is the format of IPV6 DNS servers? Is that also in the format 
> of an IPV6 IP address?
>
>     I have built the latest openbmc project image by adding the option
>     "ipv6" in the term DISTRO_FEATURES_DEFAULT in the file
>     /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping
>     the openbmc  IPV6 IP successfully, but cannot login to it by
>     openssh command.
>     It seemed that there are some works on openbmc embedded OS to
>     support IPV6.
>     Another issue from Ruixia is the IPV6 Dbus Interfaces design, I
>     found there are some IPV6 rest-Dbus or Redfish interfaces on yaml
>     files available. I don' t know is it enough to the IPV6 webui.
>
>
> Ratan, would you be able to help Ruixia and Xiuzhi with this?
>
> Regards,
> Jandra Aranguren
>
>
> On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn 
> <mailto:rxsun@zd-tech.com.cn>> wrote:
>
>     hi，
>     After the meeting of last week，I was expecting the email about
>     ipv6 ui designing and ipv6 interface with web server ，when will I
>     receive it？Should we have another meeting this week？
>     best regard！
>
>     ruixia，sun
>
>
>     	
>     孙瑞霞
>     邮箱：rxsun@zd-tech.com.cn
>
>     <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>
>
>     签名由 网易邮箱大师
>     <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>
>     On 06/25/2019 23:25, Jandra A <mailto:jandraara@gmail.com> wrote:
>
>         Great, let's meet using my webex
>         https://ibm.webex.com/meet/jandra.aranguren I will send you an
>         invite as well.
>
>         On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>         <mailto:rxsun@zd-tech.com.cn>> wrote:
>
>             Hi,all,
>             I will be glad to meet at 7:00AM Central time this
>             Wednesday (June 26th).
>
>             Ruixia,Sun
>
>
>
>             发件人："Jandra A" <jandraara@gmail.com
>             <mailto:jandraara@gmail.com>>
>             发送日期：2019-06-25 00:51:39
>             收件人：xiuzhi <1450335857@qq.com <mailto:1450335857@qq.com>>
>             抄送人：Derick <derick.montague@gmail.com
>             <mailto:derick.montague@gmail.com>>,openbmc
>             <openbmc@lists.ozlabs.org
>             <mailto:openbmc@lists.ozlabs.org>>,rxsun
>             <rxsun@zd-tech.com.cn <mailto:rxsun@zd-tech.com.cn>>
>             主题：Re: Re: Network Settings GUI
>
>                 Hi Xiuzhi and Ruixia,
>
>                 It would be great to set some time to align on the
>                 requirements from design and how to work together so
>                 that your team can start on the so front-end development.
>
>                 Like Derick said, we meet every other Wednesday at
>                 10:00 Central time to discuss GUI issues, with the
>                 next one being next Wednesday (July 3rd). Hopefully
>                 you can make that.
>
>                 If you cannot, I am happy to meet at 7:00 or 8:00 AM
>                 Central time this Wednesday (June 26th) or Friday
>                 (June 28th). Please let me know.
>
>                 Regards,
>
>                 On Wed, Jun 19, 2019 at 8:30 PM xiuzhi
>                 <1450335857@qq.com <mailto:1450335857@qq.com>> wrote:
>
>                     Hi Derick,
>                     >> The IPV6 webui should support both IPV4 and
>                     IPV6 on a single interface at the same time and
>                     users can set IPV4 and IPV6 on the same network
>                     webpage from Lenovo test cases.
>
>                     >Thank you!
>
>                     >>  Ruixia (her email: rxsun@zd-tech.com.cn
>                     <mailto:rxsun@zd-tech.com.cn>;), form my team can
>                     do  front-end  to implement your design .  It
>                     would be best if the IPV6 feature could be
>                     achieved in one to two months.
>
>                     >It would be great if she were able to join our
>                     GUI Community
>                     workgroup. It's every other Wednesday at 10:00
>                     Central Time. We use
>                     these to discuss all the GUI issues. Where are you
>                     located?
>                       I am in BeiJing  UTC+8. The meeting time
>                     is  Wednesday  23:00 Beijing Time (Wednesday 10:00
>                     am Central Daylight Time),isn't it?
>                     >GUI Community Workgroup Wiki:
>                     https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>
>                     Best,
>                     Xiuzhi
>

[-- Attachment #2.1: Type: text/html, Size: 16109 bytes --]

[-- Attachment #2.2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[Jandra A]

[-- Attachment #1.1: Type: text/plain, Size: 5338 bytes --]

>
>
>    - In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>    enabled.
>
>
>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>
>
Can you clarify this? I do not follow.

On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

> Hi，
>
> The following item is expected,
>
>    - In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>    enabled.
>
>
>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>
>
>    - IPV6 DNS servers  is in the format of an IPV6 IP address.
>
> it will be similar with the picture below, maybe.
>
> Best regard, thanks.
>
> ruixia,sun.
>
>
> 在 2019/7/1 下午11:26, Jandra A 写道:
>
> Ruixia -- I am waiting on a couple of responses from our backend team to
> be able to provide a design that aligns with how the functionality is
> developed.
>
> Ratan -- I'm helping create the design mockup for including IPV6 in the
> Network settings panel so that Lenovo can do the front-end implementation.
> Do you know if the work your team was doing for this will be merged to the
> master soon?
>
> I have some questions I am hoping you can help answer for this IPV6
> design:
> - What happens to zeroconf when both IPV4 and IPV6 are enabled? Does it
> try to assign an IP address to both (in the case that DHCP doesn't give
> either) or does it only assign either an IPV4 IP address or an IPV6 IP
> address?
> - What is the format of IPV6 DNS servers? Is that also in the format of an
> IPV6 IP address?
>
> I have built the latest openbmc project image by adding the option "ipv6"
>> in the term DISTRO_FEATURES_DEFAULT in the file
>> /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping the
>> openbmc  IPV6 IP successfully, but cannot login to it by openssh command.
>> It seemed that there are some works on openbmc embedded OS to support
>> IPV6.
>> Another issue from Ruixia is the IPV6 Dbus Interfaces design, I found
>> there are some IPV6 rest-Dbus or Redfish interfaces on yaml files
>> available. I don' t know is it enough to the IPV6 webui.
>
>
> Ratan, would you be able to help Ruixia and Xiuzhi with this?
>
> Regards,
> Jandra Aranguren
>
>
> On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>
>> hi，
>> After the meeting of last week，I was expecting the email about ipv6 ui
>> designing and ipv6 interface with web server ，when will I receive it？Should
>> we have another meeting this week？
>> best regard！
>>
>> ruixia，sun
>>
>>
>> 孙瑞霞
>> 邮箱：rxsun@zd-tech.com.cn
>>
>> <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>
>> 签名由 网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>> On 06/25/2019 23:25, Jandra A <jandraara@gmail.com> wrote:
>>
>> Great, let's meet using my webex
>> https://ibm.webex.com/meet/jandra.aranguren I will send you an invite as
>> well.
>>
>> On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>>
>>> Hi,all,
>>> I will be glad to meet at 7:00AM Central time this Wednesday (June 26th).
>>>
>>> Ruixia,Sun
>>>
>>>
>>>
>>> 发件人："Jandra A" <jandraara@gmail.com>
>>> 发送日期：2019-06-25 00:51:39
>>> 收件人：xiuzhi <1450335857@qq.com>
>>> 抄送人：Derick <derick.montague@gmail.com>,openbmc <openbmc@lists.ozlabs.org>,rxsun
>>> <rxsun@zd-tech.com.cn>
>>> 主题：Re: Re: Network Settings GUI
>>>
>>> Hi Xiuzhi and Ruixia,
>>>
>>> It would be great to set some time to align on the requirements from
>>> design and how to work together so that your team can start on the so
>>> front-end development.
>>>
>>> Like Derick said, we meet every other Wednesday at 10:00 Central time to
>>> discuss GUI issues, with the next one being next Wednesday (July 3rd).
>>> Hopefully you can make that.
>>>
>>> If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
>>> Wednesday (June 26th) or Friday (June 28th). Please let me know.
>>>
>>> Regards,
>>>
>>> On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:
>>>
>>>> Hi Derick,
>>>> >> The IPV6 webui should support both IPV4 and IPV6 on a single
>>>> interface at the same time and users can set IPV4 and IPV6 on the same
>>>> network webpage from Lenovo test cases.
>>>>
>>>> >Thank you!
>>>>
>>>> >>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do
>>>> front-end  to implement your design .  It would be best if the IPV6 feature
>>>> could be achieved in one to two months.
>>>>
>>>> >It would be great if she were able to join our GUI Community
>>>> workgroup. It's every other Wednesday at 10:00 Central Time. We use
>>>> these to discuss all the GUI issues. Where are you located?
>>>>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing
>>>> Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>>>> >GUI Community Workgroup Wiki:
>>>> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>>
>>>> Best,
>>>> Xiuzhi
>>>>
>>>

[-- Attachment #1.2: Type: text/html, Size: 15246 bytes --]

[-- Attachment #2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[孙瑞霞]

[-- Attachment #1: Type: text/plain, Size: 7870 bytes --]

Hi Jandra,
 >>In the case that DHCP doesn't give either， both IPV4 and IPV6 are 
enabled.
 >>In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.

 >Can you clarify this? I do not follow.

when both IPV4 and IPV6 are enabled and DHCP is disabled and the user 
input nothing to IPV4 and IPV6 address input box （zeroconf）,in this 
case,it shall not to assign any IP address to bmc network device, the 
webui should give an error tips to users.

It only works when the user input the correct format IP address.
PS:Having a check box to enable ipv4 and ipv6 configuration would be better.
One useful 
link:https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
Best,
Ruixia

在 2019/7/2 下午8:57, Jandra A 写道:
>
>       * In the case that DHCP doesn't give either， both IPV4 and IPV6
>         are enabled.
>
>       * In the case that IPV6 DHCP is given ,IPV6 are disabled,so are
>         IPV4.
>
>
> Can you clarify this? I do not follow.
>
> On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn 
> <mailto:rxsun@zd-tech.com.cn>> wrote:
>
>     Hi，
>
>     The following item is expected,
>
>       * In the case that DHCP doesn't give either， both IPV4 and IPV6
>         are enabled.
>
>       * In the case that IPV6 DHCP is given ,IPV6 are disabled,so are
>         IPV4.
>
>       * IPV6 DNS servers  is in the format of an IPV6 IP address.
>
>     it will be similar with the picture below, maybe.
>
>
>     Best regard, thanks.
>
>     ruixia,sun.
>
>
>     在 2019/7/1 下午11:26, Jandra A 写道:
>>     Ruixia -- I am waiting on a couple of responses from our backend
>>     team to be able to provide a design that aligns with how the
>>     functionality is developed.
>>
>>     Ratan -- I'm helping create the design mockup for including IPV6
>>     in the Network settings panel so that Lenovo can do the front-end
>>     implementation. Do you know if the work your team was doing for
>>     this will be merged to the master soon?
>>
>>     I have some questions I am hoping you can help answer for this
>>     IPV6 design:
>>     - What happens to zeroconf when both IPV4 and IPV6 are enabled?
>>     Does it try to assign an IP address to both (in the case that
>>     DHCP doesn't give either) or does it only assign either an IPV4
>>     IP address or an IPV6 IP address?
>>     - What is the format of IPV6 DNS servers? Is that also in the
>>     format of an IPV6 IP address?
>>
>>         I have built the latest openbmc project image by adding the
>>         option "ipv6" in the term DISTRO_FEATURES_DEFAULT in the file
>>         /meta-phosphor/conf/distro/include/phosphor-base.inc. I can
>>         ping the openbmc  IPV6 IP successfully, but cannot login to
>>         it by openssh command.
>>         It seemed that there are some works on openbmc embedded OS to
>>         support IPV6.
>>         Another issue from Ruixia is the IPV6 Dbus Interfaces design,
>>         I found there are some IPV6 rest-Dbus or Redfish interfaces
>>         on yaml files available. I don' t know is it enough to the
>>         IPV6 webui.
>>
>>
>>     Ratan, would you be able to help Ruixia and Xiuzhi with this?
>>
>>     Regards,
>>     Jandra Aranguren
>>
>>
>>     On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>>     <mailto:rxsun@zd-tech.com.cn>> wrote:
>>
>>         hi，
>>         After the meeting of last week，I was expecting the email
>>         about ipv6 ui designing and ipv6 interface with web server
>>         ，when will I receive it？Should we have another meeting this
>>         week？
>>         best regard！
>>
>>         ruixia，sun
>>
>>
>>         	
>>         孙瑞霞
>>         邮箱：rxsun@zd-tech.com.cn
>>
>>         <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>
>>
>>         签名由 网易邮箱大师
>>         <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>>
>>         On 06/25/2019 23:25, Jandra A <mailto:jandraara@gmail.com>
>>         wrote:
>>
>>             Great, let's meet using my webex
>>             https://ibm.webex.com/meet/jandra.aranguren I will send
>>             you an invite as well.
>>
>>             On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>>             <mailto:rxsun@zd-tech.com.cn>> wrote:
>>
>>                 Hi,all,
>>                 I will be glad to meet at 7:00AM Central time this
>>                 Wednesday (June 26th).
>>
>>                 Ruixia,Sun
>>
>>
>>
>>                 发件人："Jandra A" <jandraara@gmail.com
>>                 <mailto:jandraara@gmail.com>>
>>                 发送日期：2019-06-25 00:51:39
>>                 收件人：xiuzhi <1450335857@qq.com
>>                 <mailto:1450335857@qq.com>>
>>                 抄送人：Derick <derick.montague@gmail.com
>>                 <mailto:derick.montague@gmail.com>>,openbmc
>>                 <openbmc@lists.ozlabs.org
>>                 <mailto:openbmc@lists.ozlabs.org>>,rxsun
>>                 <rxsun@zd-tech.com.cn <mailto:rxsun@zd-tech.com.cn>>
>>                 主题：Re: Re: Network Settings GUI
>>
>>                     Hi Xiuzhi and Ruixia,
>>
>>                     It would be great to set some time to align on
>>                     the requirements from design and how to work
>>                     together so that your team can start on the so
>>                     front-end development.
>>
>>                     Like Derick said, we meet every other Wednesday
>>                     at 10:00 Central time to discuss GUI issues, with
>>                     the next one being next Wednesday (July 3rd).
>>                     Hopefully you can make that.
>>
>>                     If you cannot, I am happy to meet at 7:00 or 8:00
>>                     AM Central time this Wednesday (June 26th) or
>>                     Friday (June 28th). Please let me know.
>>
>>                     Regards,
>>
>>                     On Wed, Jun 19, 2019 at 8:30 PM xiuzhi
>>                     <1450335857@qq.com <mailto:1450335857@qq.com>> wrote:
>>
>>                         Hi Derick,
>>                         >> The IPV6 webui should support both IPV4
>>                         and IPV6 on a single interface at the same
>>                         time and users can set IPV4 and IPV6 on the
>>                         same network webpage from Lenovo test cases.
>>
>>                         >Thank you!
>>
>>                         >>  Ruixia (her email: rxsun@zd-tech.com.cn
>>                         <mailto:rxsun@zd-tech.com.cn>;), form my team
>>                         can do  front-end  to implement your design
>>                         .  It would be best if the IPV6 feature could
>>                         be achieved in one to two months.
>>
>>                         >It would be great if she were able to join
>>                         our GUI Community
>>                         workgroup. It's every other Wednesday at
>>                         10:00 Central Time. We use
>>                         these to discuss all the GUI issues. Where
>>                         are you located?
>>                           I am in BeiJing  UTC+8. The meeting time
>>                         is  Wednesday  23:00 Beijing Time (Wednesday
>>                         10:00 am Central Daylight Time),isn't it?
>>                         >GUI Community Workgroup Wiki:
>>                         https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>
>>                         Best,
>>                         Xiuzhi
>>

[-- Attachment #2.1: Type: text/html, Size: 21250 bytes --]

[-- Attachment #2.2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[Jandra A]

[-- Attachment #1.1: Type: text/plain, Size: 7421 bytes --]

Hi Ruixia,

Thanks for the clarification. I wanted to let you know we are still working
on this and hoping to get it to you all as soon as we can. I want to make
sure we are understanding the requirements for Lenovo:

- Need the ability to support both IPV4 and IPV6 simultaneously on a single
interface.
- In the case the both IPV4 and IPV6 are enabled in a single interface,
zero-configuration cannot assign addresses to either.
- The format for IPV6 DNS servers is the same as IPV6 IP addresses. Do each
of these also have a Fully Qualified Domain Name (FQDN)?
- Only two IP addresses maximum (in addition to those provided by
zero-config, if any) will be supported per interface. If there are two, one
must be IPV4 and one must be IPV6.
- For IPV6, we will support either DHCP or static configurations, not both
at the same time on the same interface. Same applies for IPV6, though IPV4
can be different from IPV6.

Thank you for your patience with us.

Regards,
Jandra Aranguren

On Wed, Jul 3, 2019 at 12:49 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

> Hi Jandra,
> >>In the case that DHCP doesn't give either， both IPV4 and IPV6 are
> enabled.
> >>In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>
> >Can you clarify this? I do not follow.
>
> when both IPV4 and IPV6 are enabled and DHCP is disabled and the user
> input nothing to IPV4 and IPV6 address input box （zeroconf）,in this case,it
> shall not to assign any IP address to bmc network device, the webui should
> give an error tips to users.
>
> It only works when the user input the correct format IP address.
> PS:Having a check box to enable ipv4 and ipv6 configuration would be
> better.
> One useful link:
> https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
> Best,
> Ruixia
>
> 在 2019/7/2 下午8:57, Jandra A 写道:
>
>
>>    - In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>>    enabled.
>>
>>
>>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>
>>
> Can you clarify this? I do not follow.
>
> On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>
>> Hi，
>>
>> The following item is expected,
>>
>>    - In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>>    enabled.
>>
>>
>>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>
>>
>>    - IPV6 DNS servers  is in the format of an IPV6 IP address.
>>
>> it will be similar with the picture below, maybe.
>>
>> Best regard, thanks.
>>
>> ruixia,sun.
>>
>>
>> 在 2019/7/1 下午11:26, Jandra A 写道:
>>
>> Ruixia -- I am waiting on a couple of responses from our backend team to
>> be able to provide a design that aligns with how the functionality is
>> developed.
>>
>> Ratan -- I'm helping create the design mockup for including IPV6 in the
>> Network settings panel so that Lenovo can do the front-end implementation.
>> Do you know if the work your team was doing for this will be merged to the
>> master soon?
>>
>> I have some questions I am hoping you can help answer for this IPV6
>> design:
>> - What happens to zeroconf when both IPV4 and IPV6 are enabled? Does it
>> try to assign an IP address to both (in the case that DHCP doesn't give
>> either) or does it only assign either an IPV4 IP address or an IPV6 IP
>> address?
>> - What is the format of IPV6 DNS servers? Is that also in the format of
>> an IPV6 IP address?
>>
>> I have built the latest openbmc project image by adding the option "ipv6"
>>> in the term DISTRO_FEATURES_DEFAULT in the file
>>> /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping the
>>> openbmc  IPV6 IP successfully, but cannot login to it by openssh command.
>>> It seemed that there are some works on openbmc embedded OS to support
>>> IPV6.
>>> Another issue from Ruixia is the IPV6 Dbus Interfaces design, I found
>>> there are some IPV6 rest-Dbus or Redfish interfaces on yaml files
>>> available. I don' t know is it enough to the IPV6 webui.
>>
>>
>> Ratan, would you be able to help Ruixia and Xiuzhi with this?
>>
>> Regards,
>> Jandra Aranguren
>>
>>
>> On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>>
>>> hi，
>>> After the meeting of last week，I was expecting the email about ipv6 ui
>>> designing and ipv6 interface with web server ，when will I receive it？Should
>>> we have another meeting this week？
>>> best regard！
>>>
>>> ruixia，sun
>>>
>>>
>>> 孙瑞霞
>>> 邮箱：rxsun@zd-tech.com.cn
>>>
>>> <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>>
>>> 签名由 网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>>> On 06/25/2019 23:25, Jandra A <jandraara@gmail.com> wrote:
>>>
>>> Great, let's meet using my webex
>>> https://ibm.webex.com/meet/jandra.aranguren I will send you an invite
>>> as well.
>>>
>>> On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>>>
>>>> Hi,all,
>>>> I will be glad to meet at 7:00AM Central time this Wednesday (June
>>>> 26th).
>>>>
>>>> Ruixia,Sun
>>>>
>>>>
>>>>
>>>> 发件人："Jandra A" <jandraara@gmail.com>
>>>> 发送日期：2019-06-25 00:51:39
>>>> 收件人：xiuzhi <1450335857@qq.com>
>>>> 抄送人：Derick <derick.montague@gmail.com>,openbmc <
>>>> openbmc@lists.ozlabs.org>,rxsun <rxsun@zd-tech.com.cn>
>>>> 主题：Re: Re: Network Settings GUI
>>>>
>>>> Hi Xiuzhi and Ruixia,
>>>>
>>>> It would be great to set some time to align on the requirements from
>>>> design and how to work together so that your team can start on the so
>>>> front-end development.
>>>>
>>>> Like Derick said, we meet every other Wednesday at 10:00 Central time
>>>> to discuss GUI issues, with the next one being next Wednesday (July 3rd).
>>>> Hopefully you can make that.
>>>>
>>>> If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
>>>> Wednesday (June 26th) or Friday (June 28th). Please let me know.
>>>>
>>>> Regards,
>>>>
>>>> On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:
>>>>
>>>>> Hi Derick,
>>>>> >> The IPV6 webui should support both IPV4 and IPV6 on a single
>>>>> interface at the same time and users can set IPV4 and IPV6 on the same
>>>>> network webpage from Lenovo test cases.
>>>>>
>>>>> >Thank you!
>>>>>
>>>>> >>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do
>>>>> front-end  to implement your design .  It would be best if the IPV6 feature
>>>>> could be achieved in one to two months.
>>>>>
>>>>> >It would be great if she were able to join our GUI Community
>>>>> workgroup. It's every other Wednesday at 10:00 Central Time. We use
>>>>> these to discuss all the GUI issues. Where are you located?
>>>>>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00
>>>>> Beijing Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>>>>> >GUI Community Workgroup Wiki:
>>>>> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>>>
>>>>> Best,
>>>>> Xiuzhi
>>>>>
>>>>

[-- Attachment #1.2: Type: text/html, Size: 20859 bytes --]

[-- Attachment #2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[孙瑞霞]

[-- Attachment #1: Type: text/plain, Size: 10295 bytes --]

Hi Jandra，

It'd be better to have FGDN, but we can do without right now. Hope that 
we'll have it in the future.

The other entries in your email are consistent with our understanding.

Thanks for your reply.

Ruixia,Sun.


在 2019/7/17 上午4:22, Jandra A 写道:
> Hi Ruixia,
>
> Thanks for the clarification. I wanted to let you know we are still 
> working on this and hoping to get it to you all as soon as we can. I 
> want to make sure we are understanding the requirements for Lenovo:
>
> - Need the ability to support both IPV4 and IPV6 simultaneously on a 
> single interface.
> - In the case the both IPV4 and IPV6 are enabled in a single 
> interface, zero-configuration cannot assign addresses to either.
> - The format for IPV6 DNS servers is the same as IPV6 IP addresses. Do 
> each of these also have a Fully Qualified Domain Name (FQDN)?
> - Only two IP addresses maximum (in addition to those provided by 
> zero-config, if any) will be supported per interface. If there are 
> two, one must be IPV4 and one must be IPV6.
> - For IPV6, we will support either DHCP or static configurations, not 
> both at the same time on the same interface. Same applies for IPV6, 
> though IPV4 can be different from IPV6.
>
> Thank you for your patience with us.
>
> Regards,
> Jandra Aranguren
>
> On Wed, Jul 3, 2019 at 12:49 AM 孙瑞霞 <rxsun@zd-tech.com.cn 
> <mailto:rxsun@zd-tech.com.cn>> wrote:
>
>     Hi Jandra,
>     >>In the case that DHCP doesn't give either， both IPV4 and IPV6
>     are enabled.
>     >>In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>
>     >Can you clarify this? I do not follow.
>
>     when both IPV4 and IPV6 are enabled and DHCP is disabled and the
>     user input nothing to IPV4 and IPV6 address input box
>     （zeroconf）,in this case,it shall not to assign any IP address to
>     bmc network device, the webui should give an error tips to users.
>
>     It only works when the user input the correct format IP address.
>     PS:Having a check box to enable ipv4 and ipv6 configuration would
>     be better.
>     One useful
>     link:https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
>     Best,
>     Ruixia
>
>     在 2019/7/2 下午8:57, Jandra A 写道:
>>
>>           * In the case that DHCP doesn't give either， both IPV4 and
>>             IPV6 are enabled.
>>
>>           * In the case that IPV6 DHCP is given ,IPV6 are disabled,so
>>             are IPV4.
>>
>>
>>     Can you clarify this? I do not follow.
>>
>>     On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>>     <mailto:rxsun@zd-tech.com.cn>> wrote:
>>
>>         Hi，
>>
>>         The following item is expected,
>>
>>           * In the case that DHCP doesn't give either， both IPV4 and
>>             IPV6 are enabled.
>>
>>           * In the case that IPV6 DHCP is given ,IPV6 are disabled,so
>>             are IPV4.
>>
>>           * IPV6 DNS servers  is in the format of an IPV6 IP address.
>>
>>         it will be similar with the picture below, maybe.
>>
>>
>>         Best regard, thanks.
>>
>>         ruixia,sun.
>>
>>
>>         在 2019/7/1 下午11:26, Jandra A 写道:
>>>         Ruixia -- I am waiting on a couple of responses from our
>>>         backend team to be able to provide a design that aligns with
>>>         how the functionality is developed.
>>>
>>>         Ratan -- I'm helping create the design mockup for including
>>>         IPV6 in the Network settings panel so that Lenovo can do the
>>>         front-end implementation. Do you know if the work your team
>>>         was doing for this will be merged to the master soon?
>>>
>>>         I have some questions I am hoping you can help answer for
>>>         this IPV6 design:
>>>         - What happens to zeroconf when both IPV4 and IPV6 are
>>>         enabled? Does it try to assign an IP address to both (in the
>>>         case that DHCP doesn't give either) or does it only assign
>>>         either an IPV4 IP address or an IPV6 IP address?
>>>         - What is the format of IPV6 DNS servers? Is that also in
>>>         the format of an IPV6 IP address?
>>>
>>>             I have built the latest openbmc project image by adding
>>>             the option "ipv6" in the term DISTRO_FEATURES_DEFAULT in
>>>             the file
>>>             /meta-phosphor/conf/distro/include/phosphor-base.inc. I
>>>             can ping the openbmc  IPV6 IP successfully, but cannot
>>>             login to it by openssh command.
>>>             It seemed that there are some works on openbmc embedded
>>>             OS to support IPV6.
>>>             Another issue from Ruixia is the IPV6 Dbus Interfaces
>>>             design, I found there are some IPV6 rest-Dbus or Redfish
>>>             interfaces on yaml files available. I don' t know is it
>>>             enough to the IPV6 webui.
>>>
>>>
>>>         Ratan, would you be able to help Ruixia and Xiuzhi with this?
>>>
>>>         Regards,
>>>         Jandra Aranguren
>>>
>>>
>>>         On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>>>         <mailto:rxsun@zd-tech.com.cn>> wrote:
>>>
>>>             hi，
>>>             After the meeting of last week，I was expecting the email
>>>             about ipv6 ui designing and ipv6 interface with web
>>>             server ，when will I receive it？Should we have another
>>>             meeting this week？
>>>             best regard！
>>>
>>>             ruixia，sun
>>>
>>>
>>>             	
>>>             孙瑞霞
>>>             邮箱：rxsun@zd-tech.com.cn
>>>
>>>             <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>>
>>>
>>>             签名由 网易邮箱大师
>>>             <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>>>
>>>             On 06/25/2019 23:25, Jandra A
>>>             <mailto:jandraara@gmail.com> wrote:
>>>
>>>                 Great, let's meet using my webex
>>>                 https://ibm.webex.com/meet/jandra.aranguren I will
>>>                 send you an invite as well.
>>>
>>>                 On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞
>>>                 <rxsun@zd-tech.com.cn <mailto:rxsun@zd-tech.com.cn>>
>>>                 wrote:
>>>
>>>                     Hi,all,
>>>                     I will be glad to meet at 7:00AM Central time
>>>                     this Wednesday (June 26th).
>>>
>>>                     Ruixia,Sun
>>>
>>>
>>>
>>>                     发件人："Jandra A" <jandraara@gmail.com
>>>                     <mailto:jandraara@gmail.com>>
>>>                     发送日期：2019-06-25 00:51:39
>>>                     收件人：xiuzhi <1450335857@qq.com
>>>                     <mailto:1450335857@qq.com>>
>>>                     抄送人：Derick <derick.montague@gmail.com
>>>                     <mailto:derick.montague@gmail.com>>,openbmc
>>>                     <openbmc@lists.ozlabs.org
>>>                     <mailto:openbmc@lists.ozlabs.org>>,rxsun
>>>                     <rxsun@zd-tech.com.cn <mailto:rxsun@zd-tech.com.cn>>
>>>                     主题：Re: Re: Network Settings GUI
>>>
>>>                         Hi Xiuzhi and Ruixia,
>>>
>>>                         It would be great to set some time to align
>>>                         on the requirements from design and how to
>>>                         work together so that your team can start on
>>>                         the so front-end development.
>>>
>>>                         Like Derick said, we meet every other
>>>                         Wednesday at 10:00 Central time to discuss
>>>                         GUI issues, with the next one being next
>>>                         Wednesday (July 3rd). Hopefully you can make
>>>                         that.
>>>
>>>                         If you cannot, I am happy to meet at 7:00 or
>>>                         8:00 AM Central time this Wednesday (June
>>>                         26th) or Friday (June 28th). Please let me
>>>                         know.
>>>
>>>                         Regards,
>>>
>>>                         On Wed, Jun 19, 2019 at 8:30 PM xiuzhi
>>>                         <1450335857@qq.com
>>>                         <mailto:1450335857@qq.com>> wrote:
>>>
>>>                             Hi Derick,
>>>                             >> The IPV6 webui should support both
>>>                             IPV4 and IPV6 on a single interface at
>>>                             the same time and users can set IPV4 and
>>>                             IPV6 on the same network webpage from
>>>                             Lenovo test cases.
>>>
>>>                             >Thank you!
>>>
>>>                             >>  Ruixia (her email:
>>>                             rxsun@zd-tech.com.cn
>>>                             <mailto:rxsun@zd-tech.com.cn>;), form my
>>>                             team can do front-end  to implement your
>>>                             design .  It would be best if the IPV6
>>>                             feature could be achieved in one to two
>>>                             months.
>>>
>>>                             >It would be great if she were able to
>>>                             join our GUI Community
>>>                             workgroup. It's every other Wednesday at
>>>                             10:00 Central Time. We use
>>>                             these to discuss all the GUI issues.
>>>                             Where are you located?
>>>                               I am in BeiJing  UTC+8. The meeting
>>>                             time is  Wednesday  23:00 Beijing Time
>>>                             (Wednesday 10:00 am Central Daylight
>>>                             Time),isn't it?
>>>                             >GUI Community Workgroup Wiki:
>>>                             https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>
>>>                             Best,
>>>                             Xiuzhi
>>>

[-- Attachment #2.1: Type: text/html, Size: 29878 bytes --]

[-- Attachment #2.2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[Jandra A]

[-- Attachment #1.1: Type: text/plain, Size: 8398 bytes --]

Hi Ruixia,

I want to point you to the Gerrit commit for the Network Settings design
supporting only IPV4. It would be great for you to review the code and
familiarize yourself with the structure so that once this is merged,
implementing the IPV6 design is fast and easy.
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317

Regards,
Jandra Aranguren


On Wed, Jul 17, 2019 at 4:08 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

> Hi Jandra，
>
> 	It'd be better to have FGDN, but we can do without right now. Hope that we'll have it in the future.
>
> 	The other entries in your email are consistent with our understanding.
>
> Thanks for your reply.
>
> Ruixia,Sun.
>
>
> 在 2019/7/17 上午4:22, Jandra A 写道:
>
> Hi Ruixia,
>
> Thanks for the clarification. I wanted to let you know we are still
> working on this and hoping to get it to you all as soon as we can. I want
> to make sure we are understanding the requirements for Lenovo:
>
> - Need the ability to support both IPV4 and IPV6 simultaneously on a
> single interface.
> - In the case the both IPV4 and IPV6 are enabled in a single interface,
> zero-configuration cannot assign addresses to either.
> - The format for IPV6 DNS servers is the same as IPV6 IP addresses. Do
> each of these also have a Fully Qualified Domain Name (FQDN)?
> - Only two IP addresses maximum (in addition to those provided by
> zero-config, if any) will be supported per interface. If there are two, one
> must be IPV4 and one must be IPV6.
> - For IPV6, we will support either DHCP or static configurations, not both
> at the same time on the same interface. Same applies for IPV6, though IPV4
> can be different from IPV6.
>
> Thank you for your patience with us.
>
> Regards,
> Jandra Aranguren
>
> On Wed, Jul 3, 2019 at 12:49 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>
>> Hi Jandra,
>> >>In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>> enabled.
>> >>In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>
>> >Can you clarify this? I do not follow.
>>
>> when both IPV4 and IPV6 are enabled and DHCP is disabled and the user
>> input nothing to IPV4 and IPV6 address input box （zeroconf）,in this case,it
>> shall not to assign any IP address to bmc network device, the webui should
>> give an error tips to users.
>>
>> It only works when the user input the correct format IP address.
>> PS:Having a check box to enable ipv4 and ipv6 configuration would be
>> better.
>> One useful link:
>> https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
>> Best,
>> Ruixia
>>
>> 在 2019/7/2 下午8:57, Jandra A 写道:
>>
>>
>>>    - In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>>>    enabled.
>>>
>>>
>>>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>>
>>>
>> Can you clarify this? I do not follow.
>>
>> On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>>
>>> Hi，
>>>
>>> The following item is expected,
>>>
>>>    - In the case that DHCP doesn't give either， both IPV4 and IPV6 are
>>>    enabled.
>>>
>>>
>>>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>>
>>>
>>>    - IPV6 DNS servers  is in the format of an IPV6 IP address.
>>>
>>> it will be similar with the picture below, maybe.
>>>
>>> Best regard, thanks.
>>>
>>> ruixia,sun.
>>>
>>>
>>> 在 2019/7/1 下午11:26, Jandra A 写道:
>>>
>>> Ruixia -- I am waiting on a couple of responses from our backend team to
>>> be able to provide a design that aligns with how the functionality is
>>> developed.
>>>
>>> Ratan -- I'm helping create the design mockup for including IPV6 in the
>>> Network settings panel so that Lenovo can do the front-end implementation.
>>> Do you know if the work your team was doing for this will be merged to the
>>> master soon?
>>>
>>> I have some questions I am hoping you can help answer for this IPV6
>>> design:
>>> - What happens to zeroconf when both IPV4 and IPV6 are enabled? Does it
>>> try to assign an IP address to both (in the case that DHCP doesn't give
>>> either) or does it only assign either an IPV4 IP address or an IPV6 IP
>>> address?
>>> - What is the format of IPV6 DNS servers? Is that also in the format of
>>> an IPV6 IP address?
>>>
>>> I have built the latest openbmc project image by adding the option
>>>> "ipv6" in the term DISTRO_FEATURES_DEFAULT in the file
>>>> /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping the
>>>> openbmc  IPV6 IP successfully, but cannot login to it by openssh command.
>>>> It seemed that there are some works on openbmc embedded OS to support
>>>> IPV6.
>>>> Another issue from Ruixia is the IPV6 Dbus Interfaces design, I found
>>>> there are some IPV6 rest-Dbus or Redfish interfaces on yaml files
>>>> available. I don' t know is it enough to the IPV6 webui.
>>>
>>>
>>> Ratan, would you be able to help Ruixia and Xiuzhi with this?
>>>
>>> Regards,
>>> Jandra Aranguren
>>>
>>>
>>> On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>>>
>>>> hi，
>>>> After the meeting of last week，I was expecting the email about ipv6 ui
>>>> designing and ipv6 interface with web server ，when will I receive it？Should
>>>> we have another meeting this week？
>>>> best regard！
>>>>
>>>> ruixia，sun
>>>>
>>>>
>>>> 孙瑞霞
>>>> 邮箱：rxsun@zd-tech.com.cn
>>>>
>>>> <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>>>
>>>> 签名由 网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>>>> On 06/25/2019 23:25, Jandra A <jandraara@gmail.com> wrote:
>>>>
>>>> Great, let's meet using my webex
>>>> https://ibm.webex.com/meet/jandra.aranguren I will send you an invite
>>>> as well.
>>>>
>>>> On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:
>>>>
>>>>> Hi,all,
>>>>> I will be glad to meet at 7:00AM Central time this Wednesday (June
>>>>> 26th).
>>>>>
>>>>> Ruixia,Sun
>>>>>
>>>>>
>>>>>
>>>>> 发件人："Jandra A" <jandraara@gmail.com>
>>>>> 发送日期：2019-06-25 00:51:39
>>>>> 收件人：xiuzhi <1450335857@qq.com>
>>>>> 抄送人：Derick <derick.montague@gmail.com>,openbmc <
>>>>> openbmc@lists.ozlabs.org>,rxsun <rxsun@zd-tech.com.cn>
>>>>> 主题：Re: Re: Network Settings GUI
>>>>>
>>>>> Hi Xiuzhi and Ruixia,
>>>>>
>>>>> It would be great to set some time to align on the requirements from
>>>>> design and how to work together so that your team can start on the so
>>>>> front-end development.
>>>>>
>>>>> Like Derick said, we meet every other Wednesday at 10:00 Central time
>>>>> to discuss GUI issues, with the next one being next Wednesday (July 3rd).
>>>>> Hopefully you can make that.
>>>>>
>>>>> If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
>>>>> Wednesday (June 26th) or Friday (June 28th). Please let me know.
>>>>>
>>>>> Regards,
>>>>>
>>>>> On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:
>>>>>
>>>>>> Hi Derick,
>>>>>> >> The IPV6 webui should support both IPV4 and IPV6 on a single
>>>>>> interface at the same time and users can set IPV4 and IPV6 on the same
>>>>>> network webpage from Lenovo test cases.
>>>>>>
>>>>>> >Thank you!
>>>>>>
>>>>>> >>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do
>>>>>> front-end  to implement your design .  It would be best if the IPV6 feature
>>>>>> could be achieved in one to two months.
>>>>>>
>>>>>> >It would be great if she were able to join our GUI Community
>>>>>> workgroup. It's every other Wednesday at 10:00 Central Time. We use
>>>>>> these to discuss all the GUI issues. Where are you located?
>>>>>>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00
>>>>>> Beijing Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>>>>>> >GUI Community Workgroup Wiki:
>>>>>> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>>>>
>>>>>> Best,
>>>>>> Xiuzhi
>>>>>>
>>>>>

[-- Attachment #1.2: Type: text/html, Size: 28065 bytes --]

[-- Attachment #2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[孙瑞霞]

[-- Attachment #1: Type: text/plain, Size: 12230 bytes --]

Hi Jandra，

         Sorry for my late reply. I will read the code to be familiar 
with it as your suggest.

         Thank you for  pushing  this  forward.

Regards,

Ruixia,Sun.


在 2019/8/28 上午6:52, Jandra A 写道:
> Hi Ruixia,
>
> I want to point you to the Gerrit commit for the Network Settings 
> design supporting only IPV4. It would be great for you to review the 
> code and familiarize yourself with the structure so that once this is 
> merged, implementing the IPV6 design is fast and easy.
> https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317
>
> Regards,
> Jandra Aranguren
>
>
> On Wed, Jul 17, 2019 at 4:08 AM 孙瑞霞 <rxsun@zd-tech.com.cn 
> <mailto:rxsun@zd-tech.com.cn>> wrote:
>
>     Hi Jandra，
>
>     It'd be better to have FGDN, but we can do without right now. Hope
>     that we'll have it in the future.
>
>     The other entries in your email are consistent with our understanding.
>
>     Thanks for your reply.
>
>     Ruixia,Sun.
>
>
>     在 2019/7/17 上午4:22, Jandra A 写道:
>>     Hi Ruixia,
>>
>>     Thanks for the clarification. I wanted to let you know we are
>>     still working on this and hoping to get it to you all as soon as
>>     we can. I want to make sure we are understanding the requirements
>>     for Lenovo:
>>
>>     - Need the ability to support both IPV4 and IPV6 simultaneously
>>     on a single interface.
>>     - In the case the both IPV4 and IPV6 are enabled in a single
>>     interface, zero-configuration cannot assign addresses to either.
>>     - The format for IPV6 DNS servers is the same as IPV6 IP
>>     addresses. Do each of these also have a Fully Qualified Domain
>>     Name (FQDN)?
>>     - Only two IP addresses maximum (in addition to those provided by
>>     zero-config, if any) will be supported per interface. If there
>>     are two, one must be IPV4 and one must be IPV6.
>>     - For IPV6, we will support either DHCP or static configurations,
>>     not both at the same time on the same interface. Same applies for
>>     IPV6, though IPV4 can be different from IPV6.
>>
>>     Thank you for your patience with us.
>>
>>     Regards,
>>     Jandra Aranguren
>>
>>     On Wed, Jul 3, 2019 at 12:49 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>>     <mailto:rxsun@zd-tech.com.cn>> wrote:
>>
>>         Hi Jandra,
>>         >>In the case that DHCP doesn't give either， both IPV4 and
>>         IPV6 are enabled.
>>         >>In the case that IPV6 DHCP is given ,IPV6 are disabled,so
>>         are IPV4.
>>
>>         >Can you clarify this? I do not follow.
>>
>>         when both IPV4 and IPV6 are enabled and DHCP is disabled and
>>         the user input nothing to IPV4 and IPV6 address input box
>>         （zeroconf）,in this case,it shall not to assign any IP address
>>         to bmc network device, the webui should give an error tips to
>>         users.
>>
>>         It only works when the user input the correct format IP address.
>>         PS:Having a check box to enable ipv4 and ipv6 configuration
>>         would be better.
>>         One useful
>>         link:https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
>>         Best,
>>         Ruixia
>>
>>         在 2019/7/2 下午8:57, Jandra A 写道:
>>>
>>>               * In the case that DHCP doesn't give either， both IPV4
>>>                 and IPV6 are enabled.
>>>
>>>               * In the case that IPV6 DHCP is given ,IPV6 are
>>>                 disabled,so are IPV4.
>>>
>>>
>>>         Can you clarify this? I do not follow.
>>>
>>>         On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn
>>>         <mailto:rxsun@zd-tech.com.cn>> wrote:
>>>
>>>             Hi，
>>>
>>>             The following item is expected,
>>>
>>>               * In the case that DHCP doesn't give either， both IPV4
>>>                 and IPV6 are enabled.
>>>
>>>               * In the case that IPV6 DHCP is given ,IPV6 are
>>>                 disabled,so are IPV4.
>>>
>>>               * IPV6 DNS servers  is in the format of an IPV6 IP
>>>                 address.
>>>
>>>             it will be similar with the picture below, maybe.
>>>
>>>
>>>             Best regard, thanks.
>>>
>>>             ruixia,sun.
>>>
>>>
>>>             在 2019/7/1 下午11:26, Jandra A 写道:
>>>>             Ruixia -- I am waiting on a couple of responses from
>>>>             our backend team to be able to provide a design that
>>>>             aligns with how the functionality is developed.
>>>>
>>>>             Ratan -- I'm helping create the design mockup for
>>>>             including IPV6 in the Network settings panel so that
>>>>             Lenovo can do the front-end implementation. Do you know
>>>>             if the work your team was doing for this will be merged
>>>>             to the master soon?
>>>>
>>>>             I have some questions I am hoping you can help answer
>>>>             for this IPV6 design:
>>>>             - What happens to zeroconf when both IPV4 and IPV6 are
>>>>             enabled? Does it try to assign an IP address to both
>>>>             (in the case that DHCP doesn't give either) or does it
>>>>             only assign either an IPV4 IP address or an IPV6 IP
>>>>             address?
>>>>             - What is the format of IPV6 DNS servers? Is that also
>>>>             in the format of an IPV6 IP address?
>>>>
>>>>                 I have built the latest openbmc project image by
>>>>                 adding the option "ipv6" in the term
>>>>                 DISTRO_FEATURES_DEFAULT in the file
>>>>                 /meta-phosphor/conf/distro/include/phosphor-base.inc.
>>>>                 I can ping the openbmc  IPV6 IP successfully, but
>>>>                 cannot login to it by openssh command.
>>>>                 It seemed that there are some works on openbmc
>>>>                 embedded OS to support IPV6.
>>>>                 Another issue from Ruixia is the IPV6 Dbus
>>>>                 Interfaces design, I found there are some IPV6
>>>>                 rest-Dbus or Redfish interfaces on yaml files
>>>>                 available. I don' t know is it enough to the IPV6
>>>>                 webui.
>>>>
>>>>
>>>>             Ratan, would you be able to help Ruixia and Xiuzhi with
>>>>             this?
>>>>
>>>>             Regards,
>>>>             Jandra Aranguren
>>>>
>>>>
>>>>             On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞
>>>>             <rxsun@zd-tech.com.cn <mailto:rxsun@zd-tech.com.cn>> wrote:
>>>>
>>>>                 hi，
>>>>                 After the meeting of last week，I was expecting the
>>>>                 email about ipv6 ui designing and ipv6 interface
>>>>                 with web server ，when will I receive it？Should we
>>>>                 have another meeting this week？
>>>>                 best regard！
>>>>
>>>>                 ruixia，sun
>>>>
>>>>
>>>>                 	
>>>>                 孙瑞霞
>>>>                 邮箱：rxsun@zd-tech.com.cn
>>>>
>>>>                 <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>>>
>>>>
>>>>                 签名由 网易邮箱大师
>>>>                 <https://mail.163.com/dashi/dlpro.html?from=mail88>
>>>>                 定制
>>>>
>>>>                 On 06/25/2019 23:25, Jandra A
>>>>                 <mailto:jandraara@gmail.com> wrote:
>>>>
>>>>                     Great, let's meet using my webex
>>>>                     https://ibm.webex.com/meet/jandra.aranguren I
>>>>                     will send you an invite as well.
>>>>
>>>>                     On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞
>>>>                     <rxsun@zd-tech.com.cn
>>>>                     <mailto:rxsun@zd-tech.com.cn>> wrote:
>>>>
>>>>                         Hi,all,
>>>>                         I will be glad to meet at 7:00AM Central
>>>>                         time this Wednesday (June 26th).
>>>>
>>>>                         Ruixia,Sun
>>>>
>>>>
>>>>
>>>>                         发件人："Jandra A" <jandraara@gmail.com
>>>>                         <mailto:jandraara@gmail.com>>
>>>>                         发送日期：2019-06-25 00:51:39
>>>>                         收件人：xiuzhi <1450335857@qq.com
>>>>                         <mailto:1450335857@qq.com>>
>>>>                         抄送人：Derick <derick.montague@gmail.com
>>>>                         <mailto:derick.montague@gmail.com>>,openbmc
>>>>                         <openbmc@lists.ozlabs.org
>>>>                         <mailto:openbmc@lists.ozlabs.org>>,rxsun
>>>>                         <rxsun@zd-tech.com.cn
>>>>                         <mailto:rxsun@zd-tech.com.cn>>
>>>>                         主题：Re: Re: Network Settings GUI
>>>>
>>>>                             Hi Xiuzhi and Ruixia,
>>>>
>>>>                             It would be great to set some time to
>>>>                             align on the requirements from design
>>>>                             and how to work together so that your
>>>>                             team can start on the so front-end
>>>>                             development.
>>>>
>>>>                             Like Derick said, we meet every other
>>>>                             Wednesday at 10:00 Central time to
>>>>                             discuss GUI issues, with the next one
>>>>                             being next Wednesday (July 3rd).
>>>>                             Hopefully you can make that.
>>>>
>>>>                             If you cannot, I am happy to meet at
>>>>                             7:00 or 8:00 AM Central time this
>>>>                             Wednesday (June 26th) or Friday (June
>>>>                             28th). Please let me know.
>>>>
>>>>                             Regards,
>>>>
>>>>                             On Wed, Jun 19, 2019 at 8:30 PM xiuzhi
>>>>                             <1450335857@qq.com
>>>>                             <mailto:1450335857@qq.com>> wrote:
>>>>
>>>>                                 Hi Derick,
>>>>                                 >> The IPV6 webui should support
>>>>                                 both IPV4 and IPV6 on a single
>>>>                                 interface at the same time and
>>>>                                 users can set IPV4 and IPV6 on the
>>>>                                 same network webpage from Lenovo
>>>>                                 test cases.
>>>>
>>>>                                 >Thank you!
>>>>
>>>>                                 >>  Ruixia (her email:
>>>>                                 rxsun@zd-tech.com.cn
>>>>                                 <mailto:rxsun@zd-tech.com.cn>;),
>>>>                                 form my team can do front-end  to
>>>>                                 implement your design .  It would
>>>>                                 be best if the IPV6 feature could
>>>>                                 be achieved in one to two months.
>>>>
>>>>                                 >It would be great if she were able
>>>>                                 to join our GUI Community
>>>>                                 workgroup. It's every other
>>>>                                 Wednesday at 10:00 Central Time. We use
>>>>                                 these to discuss all the GUI
>>>>                                 issues. Where are you located?
>>>>                                   I am in BeiJing UTC+8. The
>>>>                                 meeting time is  Wednesday 23:00
>>>>                                 Beijing Time (Wednesday 10:00 am
>>>>                                 Central Daylight Time),isn't it?
>>>>                                 >GUI Community Workgroup Wiki:
>>>>                                 https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>>
>>>>                                 Best,
>>>>                                 Xiuzhi
>>>>

[-- Attachment #2.1: Type: text/html, Size: 37921 bytes --]

[-- Attachment #2.2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Re: Network Settings GUI

[rxsun]

[-- Attachment #1.1: Type: text/plain, Size: 7860 bytes --]

Hi Jandra，
Sorry for late reply. I had read  https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317  ,  I saw the calling of redfish  in api-ulti.js . I wonder if the ipv6 has been done in this BMC system.  Would you like to tell me the ipv6 support schedule of  bmc OS? 

Thanks for your reply.
Ruixia,Sun.

2020-03-05 

rxsun 



发件人：Jandra A <jandraara@gmail.com>
发送时间：2019-08-28 06:52
主题：Re: Network Settings GUI
收件人："孙瑞霞"<rxsun@zd-tech.com.cn>
抄送："Ratan Gupta"<ratagupt@linux.vnet.ibm.com>,"xiuzhi"<1450335857@qq.com>,"Derick"<derick.montague@gmail.com>,"openbmc"<openbmc@lists.ozlabs.org>

Hi Ruixia,


I want to point you to the Gerrit commit for the Network Settings design supporting only IPV4. It would be great for you to review the code and familiarize yourself with the structure so that once this is merged, implementing the IPV6 design is fast and easy. 
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317


Regards,
Jandra Aranguren




On Wed, Jul 17, 2019 at 4:08 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

Hi Jandra，
	It'd be better to have FGDN, but we can do without right now. Hope that we'll have it in the future. 
	The other entries in your email are consistent with our understanding.
Thanks for your reply.
Ruixia,Sun.


在 2019/7/17 上午4:22, Jandra A 写道:

Hi Ruixia,  


Thanks for the clarification. I wanted to let you know we are still working on this and hoping to get it to you all as soon as we can. I want to make sure we are understanding the requirements for Lenovo:


- Need the ability to support both IPV4 and IPV6 simultaneously on a single interface.
- In the case the both IPV4 and IPV6 are enabled in a single interface, zero-configuration cannot assign addresses to either. 
- The format for IPV6 DNS servers is the same as IPV6 IP addresses. Do each of these also have a Fully Qualified Domain Name (FQDN)? 
- Only two IP addresses maximum (in addition to those provided by zero-config, if any) will be supported per interface. If there are two, one must be IPV4 and one must be IPV6. 
- For IPV6, we will support either DHCP or static configurations, not both at the same time on the same interface. Same applies for IPV6, though IPV4 can be different from IPV6. 


Thank you for your patience with us. 


Regards,
Jandra Aranguren


On Wed, Jul 3, 2019 at 12:49 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

Hi Jandra,
>>In the case that DHCP doesn't give either， both IPV4 and IPV6 are enabled.
>>In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.

>Can you clarify this? I do not follow.

when both IPV4 and IPV6 are enabled and DHCP is disabled and the user input nothing to IPV4 and IPV6 address input box （zeroconf）,in this case,it shall not to assign any IP address to bmc network device, the webui should give an error tips to users.

It only works when the user input the correct format IP address.
PS:Having a check box to enable ipv4 and ipv6 configuration would be better.
One useful link:https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
Best,
Ruixia


在 2019/7/2 下午8:57, Jandra A 写道:

In the case that DHCP doesn't give either， both IPV4 and IPV6 are enabled. 
In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4. 


Can you clarify this? I do not follow.  


On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

Hi，
The following item is expected,

In the case that DHCP doesn't give either， both IPV4 and IPV6 are enabled. 
In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.

IPV6 DNS servers  is in the format of an IPV6 IP address. 
it will be similar with the picture below, maybe.



Best regard, thanks.
ruixia,sun.


在 2019/7/1 下午11:26, Jandra A 写道:

Ruixia -- I am waiting on a couple of responses from our backend team to be able to provide a design that aligns with how the functionality is developed. 


Ratan -- I'm helping create the design mockup for including IPV6 in the Network settings panel so that Lenovo can do the front-end implementation. Do you know if the work your team was doing for this will be merged to the master soon?

I have some questions I am hoping you can help answer for this IPV6 design:  
- What happens to zeroconf when both IPV4 and IPV6 are enabled? Does it try to assign an IP address to both (in the case that DHCP doesn't give either) or does it only assign either an IPV4 IP address or an IPV6 IP address? 
- What is the format of IPV6 DNS servers? Is that also in the format of an IPV6 IP address?


I have built the latest openbmc project image by adding the option "ipv6" in the term DISTRO_FEATURES_DEFAULT in the file /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping the openbmc  IPV6 IP successfully, but cannot login to it by openssh command.
It seemed that there are some works on openbmc embedded OS to support IPV6.
Another issue from Ruixia is the IPV6 Dbus Interfaces design, I found there are some IPV6 rest-Dbus or Redfish interfaces on yaml files available. I don' t know is it enough to the IPV6 webui.


Ratan, would you be able to help Ruixia and Xiuzhi with this?


Regards,
Jandra Aranguren 




On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

hi， 
After the meeting of last week，I was expecting the email about ipv6 ui designing and ipv6 interface with web server ，when will I receive it？Should we have another meeting this week？ 
best regard！ 

ruixia，sun




 孙瑞霞
邮箱：rxsun@zd-tech.com.cn 

签名由 网易邮箱大师 定制
On 06/25/2019 23:25, Jandra A wrote: 
Great, let's meet using my webex https://ibm.webex.com/meet/jandra.aranguren I will send you an invite as well. 


On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun@zd-tech.com.cn> wrote:

Hi,all,
I will be glad to meet at 7:00AM Central time this Wednesday (June 26th).


Ruixia,Sun



发件人："Jandra A" <jandraara@gmail.com>
发送日期：2019-06-25 00:51:39
收件人：xiuzhi <1450335857@qq.com>
抄送人：Derick <derick.montague@gmail.com>,openbmc <openbmc@lists.ozlabs.org>,rxsun <rxsun@zd-tech.com.cn>
主题：Re: Re: Network Settings GUI

Hi Xiuzhi and Ruixia,  


It would be great to set some time to align on the requirements from design and how to work together so that your team can start on the so front-end development.  

Like Derick said, we meet every other Wednesday at 10:00 Central time to discuss GUI issues, with the next one being next Wednesday (July 3rd). Hopefully you can make that. 


If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this Wednesday (June 26th) or Friday (June 28th). Please let me know. 


Regards,


On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857@qq.com> wrote:

Hi Derick,
>> The IPV6 webui should support both IPV4 and IPV6 on a single interface at the same time and users can set IPV4 and IPV6 on the same network webpage from Lenovo test cases.

>Thank you!

>>  Ruixia (her email: rxsun@zd-tech.com.cn;), form my team can do  front-end  to implement your design .  It would be best if the IPV6 feature could be achieved in one to two months.

>It would be great if she were able to join our GUI Community
workgroup. It's every other Wednesday at 10:00 Central Time. We use
these to discuss all the GUI issues. Where are you located?
  I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00 Beijing Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>GUI Community Workgroup Wiki:
https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group



Best,
Xiuzhi

[-- Attachment #1.2: Type: text/html, Size: 24962 bytes --]

[-- Attachment #2: 1935163017.jpg --]
[-- Type: image/jpeg, Size: 32204 bytes --]

Re: Network Settings GUI

[Derick Montague]

Hi Ruxia,

> Sorry for late reply. I had read  https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317  ,  I saw the calling of redfish  in api-ulti.js . I wonder if the ipv6 has been done in this BMC system.  Would you like to tell me the ipv6 support schedule of  bmc OS?


 
Jandra is no longer working on this project and the IBM design team is working on a new version of the GUI written in Vue.js. We are just starting to talk about IPv6 again and I do think it may be ready. I see that Ratan is on this mail thread and he should be able to specify for sure if the backend supporting IPv6 is ready.

Thanks,
Derick

 


 
 
 

Re: Re: Network Settings GUI

[rxsun]

[-- Attachment #1: Type: text/plain, Size: 1429 bytes --]

Hi Derick,
Our team have confirmed that the Openbmc backend has supported IPV6 on version v28, I am going to implement the ipv6 configuration in webui (with angularJS),would you please tell me the  UX prototype design of webui for IPV6 is ok? I have signed the  Cooperation and  Contribution License Agreement.
BTW:How to proposal my code to webui project ，would you like to tell me detail?

Best Reguards,
ruixia,sun


2020-08-10 

rxsun 



发件人："Derick Montague" <Derick.Montague@ibm.com>
发送时间：2020-03-11 19:42
主题：Re: Network Settings GUI
收件人："rxsun"<rxsun@zd-tech.com.cn>
抄送："derick.montague"<derick.montague@gmail.com>,"openbmc"<openbmc@lists.ozlabs.org>,"ratagupt"<ratagupt@linux.vnet.ibm.com>

Hi Ruxia, 

> Sorry for late reply. I had read  https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317  ,  I saw the calling of redfish  in api-ulti.js . I wonder if the ipv6 has been done in this BMC system.  Would you like to tell me the ipv6 support schedule of  bmc OS? 


  
Jandra is no longer working on this project and the IBM design team is working on a new version of the GUI written in Vue.js. We are just starting to talk about IPv6 again and I do think it may be ready. I see that Ratan is on this mail thread and he should be able to specify for sure if the backend supporting IPv6 is ready. 

Thanks, 
Derick 

  


  
  
  

[-- Attachment #2: Type: text/html, Size: 4312 bytes --]

Re: Re: Network Settings GUI

[rxsun]

[-- Attachment #1: Type: text/plain, Size: 1427 bytes --]

Hi Derick,
My team has confirmed that the Openbmc backend has supported IPV6 on version v28, I am going to implement the ipv6 configuration in webui (with angularJS),would you please tell me the  UX prototype design of webui for IPV6 is ok? I have signed the  Cooperation and  Contribution License Agreement.
BTW:How to proposal my code to webui project ，would you like to tell me detail?

Best Reguards,
ruixia,sun


2020-08-10 

rxsun 



发件人："Derick Montague" <Derick.Montague@ibm.com>
发送时间：2020-03-11 19:42
主题：Re: Network Settings GUI
收件人："rxsun"<rxsun@zd-tech.com.cn>
抄送："derick.montague"<derick.montague@gmail.com>,"openbmc"<openbmc@lists.ozlabs.org>,"ratagupt"<ratagupt@linux.vnet.ibm.com>

Hi Ruxia, 

> Sorry for late reply. I had read  https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317  ,  I saw the calling of redfish  in api-ulti.js . I wonder if the ipv6 has been done in this BMC system.  Would you like to tell me the ipv6 support schedule of  bmc OS? 


  
Jandra is no longer working on this project and the IBM design team is working on a new version of the GUI written in Vue.js. We are just starting to talk about IPv6 again and I do think it may be ready. I see that Ratan is on this mail thread and he should be able to specify for sure if the backend supporting IPv6 is ready. 

Thanks, 
Derick 

  


  
  
  

[-- Attachment #2: Type: text/html, Size: 4568 bytes --]

Re: Re: Network Settings GUI

[rxsun]

[-- Attachment #1: Type: text/plain, Size: 1427 bytes --]

Hi Derick,
My team has confirmed that the Openbmc backend has supported IPV6 on version v28, I am going to implement the ipv6 configuration in webui (with angularJS),would you please tell me the  UX prototype design of webui for IPV6 is ok? I have signed the  Cooperation and  Contribution License Agreement.
BTW:How to proposal my code to webui project ，would you like to tell me detail?

Best Reguards,
ruixia,sun


2020-08-10 

rxsun 



发件人："Derick Montague" <Derick.Montague@ibm.com>
发送时间：2020-03-11 19:42
主题：Re: Network Settings GUI
收件人："rxsun"<rxsun@zd-tech.com.cn>
抄送："derick.montague"<derick.montague@gmail.com>,"openbmc"<openbmc@lists.ozlabs.org>,"ratagupt"<ratagupt@linux.vnet.ibm.com>

Hi Ruxia, 

> Sorry for late reply. I had read  https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317  ,  I saw the calling of redfish  in api-ulti.js . I wonder if the ipv6 has been done in this BMC system.  Would you like to tell me the ipv6 support schedule of  bmc OS? 


  
Jandra is no longer working on this project and the IBM design team is working on a new version of the GUI written in Vue.js. We are just starting to talk about IPv6 again and I do think it may be ready. I see that Ratan is on this mail thread and he should be able to specify for sure if the backend supporting IPv6 is ready. 

Thanks, 
Derick 

  


  
  
  

[-- Attachment #2: Type: text/html, Size: 4833 bytes --]

RE: Re: Network Settings GUI

[Derick Montague]

[-- Attachment #1: Type: text/html, Size: 6690 bytes --]

Re: RE: Re: Network Settings GUI

[rxsun]

[-- Attachment #1: Type: text/plain, Size: 3042 bytes --]

Hi , Derick!
I'd like to work on IPV6  functionality of phosphor-webui and start to impliment it  on the phosphor-webui.
would you please show me  the design that was originally completed for the previous layout?

And ,how to proposal my code to webui project ，would you like to tell me detail?

Best Reguards,
ruixia,sun



2020-08-19 

rxsun 



发件人："Derick Montague" <Derick.Montague@ibm.com>
发送时间：2020-08-13 11:22
主题：RE: Re: Network Settings GUI
收件人："rxsun"<rxsun@zd-tech.com.cn>
抄送："openbmc"<openbmc@lists.ozlabs.org>,"derick.montague"<derick.montague@gmail.com>,"xzcheng"<xzcheng@zd-tech.com.cn>,"ratagupt"<ratagupt@linux.vnet.ibm.com>

Hello ruxia, sun!

We have started work on the webui-vue GUI that will expect to be a replacement for phosphor-webui. The IPv6 functionality is not ready for the webui-vue GUI because we are transitioning from the REST API to Redfish. If you are interested in adding the functionality to phosphor-webui, I can look for the design that was originally completed for the previous layout. Is that something you are interested in?

Thank you!

Derick Montague
FED Lead | OpenBMC Design Team Lead
IBM Cognitive Systems User Experience


----- Original message -----
From: "rxsun"<rxsun@zd-tech.com.cn>
To: "Derick Montague"<Derick.Montague@ibm.com>
Cc: "derick.montague"<derick.montague@gmail.com>, "openbmc"<openbmc@lists.ozlabs.org>, "ratagupt"<ratagupt@linux.vnet.ibm.com>, "成修治"<xzcheng@zd-tech.com.cn>
Subject: [EXTERNAL] Re: Re: Network Settings GUI
Date: Mon, Aug 10, 2020 3:04 AM
 

Hi Derick,
My team has confirmed that the Openbmc backend has supported IPV6 on version v28, I am going to implement the ipv6 configuration in webui (with angularJS),would you please tell me the  UX prototype design of webui for IPV6 is ok? I have signed the  Cooperation and  Contribution License Agreement.
BTW:How to proposal my code to webui project ，would you like to tell me detail?

Best Reguards,
ruixia,sun


2020-08-10 

rxsun



发件人："Derick Montague" <Derick.Montague@ibm.com>
发送时间：2020-03-11 19:42
主题：Re: Network Settings GUI
收件人："rxsun"<rxsun@zd-tech.com.cn>
抄送："derick.montague"<derick.montague@gmail.com>,"openbmc"<openbmc@lists.ozlabs.org>,"ratagupt"<ratagupt@linux.vnet.ibm.com>

Hi Ruxia, 

> Sorry for late reply. I had read  https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-webui/+/24317  ,  I saw the calling of redfish  in api-ulti.js . I wonder if the ipv6 has been done in this BMC system.  Would you like to tell me the ipv6 support schedule of  bmc OS? 


  
Jandra is no longer working on this project and the IBM design team is working on a new version of the GUI written in Vue.js. We are just starting to talk about IPv6 again and I do think it may be ready. I see that Ratan is on this mail thread and he should be able to specify for sure if the backend supporting IPv6 is ready. 

Thanks, 
Derick 

  


  
  
  

[-- Attachment #2: Type: text/html, Size: 9826 bytes --]

Re: Network Settings GUI

[Derick Montague]

> I'd like to work on IPV6  functionality of phosphor-webui and start to impliment it  on the phosphor-webui.
> would you please show me  the design that was originally completed for the previous layout?  
> 
> And ,how to proposal my code to webui project ，would you like to tell me detail?  

Hi ruixia,sun,  
   
We use Gerrit for code reviews. To contribute, you will need to be added to either an individual or corporate CLA.  
https://github.com/openbmc/docs/blob/master/CONTRIBUTING.md#submitting-changes-via-gerrit-server-to-openbmc  
                         
For submitting changes, you can look to these guidelines:  
https://github.com/openbmc/docs/blob/master/CONTRIBUTING.md#planning-changes  
   
Developer documentation  
https://github.com/openbmc/docs/blob/master/development/README.md  
   
Design for phosphor-webui  
   
The design will be similar to IPv4. You can model your layout after the IPv4 layout. It has been quite some time since  
we looked at this and we will be revisiting this in the future for the new layout. We found several issues with the network  
settings design which have not been addressed in the existing phosphor-webui layout. We will be addressing those with  
the webui-vue UI that is using the Redfish API.