* IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic @ 2012-03-22 4:29 Chris Holland 2012-03-22 4:36 ` Robert Hancock 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-22 4:29 UTC (permalink / raw) To: linux-kernel; +Cc: bandidoirlandes Please cc me at: bandidoirlandes@gmail.com My optical drives are not working with 3.3 but they worked fine with 3.3rc7 These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ Ubuntu 11.10 Not working Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux cat /var/log/dmesg | egrep '(CD|DVD)' [ 0.000000] CD000-EFFFF uncachable Working Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux cat /var/log/dmesg | egrep '(CD|DVD)' [ 0.000000] CD000-EFFFF uncachable [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - 0xCD, should be 0xCC (20120111/tbutils-321) [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S SS0B PQ: 0 ANSI: 5 [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0A PQ: 0 ANSI: 5 [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 I tried to do a git bisect but I dont know what I am doing. Might just be my computer acting up. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-22 4:29 IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic Chris Holland @ 2012-03-22 4:36 ` Robert Hancock 2012-03-22 5:44 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Robert Hancock @ 2012-03-22 4:36 UTC (permalink / raw) To: Chris Holland; +Cc: linux-kernel On 03/21/2012 10:29 PM, Chris Holland wrote: > Please cc me at: bandidoirlandes@gmail.com > > My optical drives are not working with 3.3 but they worked fine with 3.3rc7 > These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ > Ubuntu 11.10 > > Not working > Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 > 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > cat /var/log/dmesg | egrep '(CD|DVD)' > [ 0.000000] CD000-EFFFF uncachable > > Working > Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 > 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > cat /var/log/dmesg | egrep '(CD|DVD)' > [ 0.000000] CD000-EFFFF uncachable > [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - > 0xCD, should be 0xCC (20120111/tbutils-321) > [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 > [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S > SS0B PQ: 0 ANSI: 5 > [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 > [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW > SHW-160P6S PS0A PQ: 0 ANSI: 5 > [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 > > I tried to do a git bisect but I dont know what I am doing. Might just > be my computer acting up. Can you post the full dmesg output from the non-working kernel? ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-22 4:36 ` Robert Hancock @ 2012-03-22 5:44 ` Chris Holland 2012-03-23 2:15 ` Robert Hancock 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-22 5:44 UTC (permalink / raw) To: Robert Hancock; +Cc: bandidoirlandes, linux-kernel On Wed, Mar 21, 2012 at 11:36 PM, Robert Hancock <hancockrwd@gmail.com> wrote: > On 03/21/2012 10:29 PM, Chris Holland wrote: >> >> Please cc me at: bandidoirlandes@gmail.com >> >> My optical drives are not working with 3.3 but they worked fine with >> 3.3rc7 >> These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ >> Ubuntu 11.10 >> >> Not working >> Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 >> 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >> cat /var/log/dmesg | egrep '(CD|DVD)' >> [ 0.000000] CD000-EFFFF uncachable >> >> Working >> Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 >> 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >> cat /var/log/dmesg | egrep '(CD|DVD)' >> [ 0.000000] CD000-EFFFF uncachable >> [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - >> 0xCD, should be 0xCC (20120111/tbutils-321) >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S >> SS0B PQ: 0 ANSI: 5 >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW >> SHW-160P6S PS0A PQ: 0 ANSI: 5 >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 >> >> I tried to do a git bisect but I dont know what I am doing. Might just >> be my computer acting up. > > > Can you post the full dmesg output from the non-working kernel? [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.0-030300-generic (apw@gomeisa) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #201203182135 SMP Mon Mar 19 01:36:20 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-030300-generic root=UUID=8f453049-cbc4-41e1-8a39-483ff818c79e ro quiet splash nomodeset video=uvesafb:mode_option=1680x1050-24,mtrr=3,scroll=ywrap vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee2000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. EP45-UD3R/EP45-UD3R, BIOS F12 01/25/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CCFFF write-protect [ 0.000000] CD000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 100000000 mask FE0000000 write-back [ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 4GB, range: 512MB, type WB [ 0.000000] reg 3, base: 3583MB, range: 1MB, type UC [ 0.000000] total RAM covered: 4095M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3583MB, range: 1MB, type UC [ 0.000000] reg 2, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5670] f5670 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ dfeda000-dfee0000 [ 0.000000] RAMDISK: 35886000 - 36c3b000 [ 0.000000] ACPI: RSDP 00000000000f7070 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000dfee2040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000dfee20c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000dfee2180 04C5A (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: HPET 00000000dfee6f40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000dfee6fc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 00000000dfee7000 00560 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 00000000dfee7560 06852 (v01 GBT GBT B0 5455312E BG?? 00020101) [ 0.000000] ACPI: APIC 00000000dfee6e40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000dfeee420 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048173 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31 [ 0.000000] Normal zone: 2048 pages used for memmap [ 0.000000] Normal zone: 129024 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee2000 [ 0.000000] PM: Registered nosave memory: 00000000dfee2000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:14100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82624 r8192 d23872 u524288 [ 0.000000] pcpu-alloc: s82624 r8192 d23872 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029736 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0-030300-generic root=UUID=8f453049-cbc4-41e1-8a39-483ff818c79e ro quiet splash nomodeset video=uvesafb:mode_option=1680x1050-24,mtrr=3,scroll=ywrap vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4024676k/4718592k available (6579k kernel code, 525900k absent, 168016k reserved, 6549k data, 912k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.662 MHz processor. [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.32 BogoMIPS (lpj=11998648) [ 0.004007] pid_max: default: 32768 minimum: 301 [ 0.004028] Security Framework initialized [ 0.004042] AppArmor: AppArmor initialized [ 0.004340] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009301] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010034] Mount-cache hash table entries: 256 [ 0.010153] Initializing cgroup subsys cpuacct [ 0.010156] Initializing cgroup subsys memory [ 0.010165] Initializing cgroup subsys devices [ 0.010168] Initializing cgroup subsys freezer [ 0.010169] Initializing cgroup subsys blkio [ 0.010175] Initializing cgroup subsys perf_event [ 0.010199] CPU: Physical Processor ID: 0 [ 0.010201] CPU: Processor Core ID: 0 [ 0.010202] mce: CPU supports 6 MCE banks [ 0.010209] CPU0: Thermal monitoring enabled (TM2) [ 0.010212] using mwait in idle threads. [ 0.012595] ACPI: Core revision 20120111 [ 0.014419] ftrace: allocating 25267 entries in 99 pages [ 0.020394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062276] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a [ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064003] ... version: 2 [ 0.064003] ... bit width: 40 [ 0.064003] ... generic registers: 2 [ 0.064003] ... value mask: 000000ffffffffff [ 0.064003] ... max period: 000000007fffffff [ 0.064003] ... fixed-purpose events: 3 [ 0.064003] ... event mask: 0000000700000003 [ 0.064003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.064003] Booting Node 0, Processors #1 [ 0.064003] smpboot cpu 1: start_ip = 98000 [ 0.072033] NMI watchdog enabled, takes one hw-pmu counter. [ 0.072067] Brought up 2 CPUs [ 0.072069] Total of 2 processors activated (11998.64 BogoMIPS). [ 0.076079] devtmpfs: initialized [ 0.077311] EVM: security.selinux [ 0.077312] EVM: security.SMACK64 [ 0.077313] EVM: security.capability [ 0.080012] PM: Registering ACPI NVS region at dfee0000 (8192 bytes) [ 0.080645] print_constraints: dummy: [ 0.080670] RTC time: 5:35:39, date: 03/22/12 [ 0.080698] NET: Registered protocol family 16 [ 0.080792] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.080794] ACPI: bus type pci registered [ 0.080839] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.080842] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.089111] PCI: Using configuration type 1 for base access [ 0.089788] bio: create slab <bio-0> at 0 [ 0.089788] ACPI: Added _OSI(Module Device) [ 0.089788] ACPI: Added _OSI(Processor Device) [ 0.089788] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.089788] ACPI: Added _OSI(Processor Aggregator Device) [ 0.089788] ACPI: EC: Look up EC in DSDT [ 0.092673] ACPI Warning: Incorrect checksum in table [TAMG] - 0xB2, should be 0xB1 (20120111/tbutils-321) [ 0.092756] ACPI: SSDT 00000000dfeede00 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.092897] ACPI: Dynamic OEM Table Load: [ 0.092900] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.092978] ACPI: SSDT 00000000dfeee2c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.093110] ACPI: Dynamic OEM Table Load: [ 0.093112] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.093213] ACPI: Interpreter enabled [ 0.093217] ACPI: (supports S0 S3 S4 S5) [ 0.093228] ACPI: Using IOAPIC for interrupt routing [ 0.095996] ACPI: No dock devices found. [ 0.096007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.096042] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.096090] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.096092] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.096094] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.096096] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.096098] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] [ 0.096129] PCI host bridge to bus 0000:00 [ 0.096131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.096133] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.096135] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.096137] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.096138] pci_bus 0000:00: root bus resource [mem 0xdff00000-0xfebfffff] [ 0.096146] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600 [ 0.096178] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604 [ 0.096207] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.096238] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 0.096273] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f] [ 0.096315] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 0.096350] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f] [ 0.096392] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 0.096428] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f] [ 0.096473] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 0.096487] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff] [ 0.096564] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 0.096576] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit] [ 0.096631] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.096648] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 0.096704] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.096724] pci 0000:00:1c.3: [8086:3a46] type 1 class 0x000604 [ 0.096779] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.096801] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 0.096836] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f] [ 0.096878] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 0.096913] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f] [ 0.096955] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 0.096989] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f] [ 0.097035] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 0.097049] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff] [ 0.097120] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.097172] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 0.097242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.097245] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.097287] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 0.097302] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907] [ 0.097308] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803] [ 0.097315] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707] [ 0.097321] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603] [ 0.097327] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f] [ 0.097334] pci 0000:00:1f.2: reg 24: [mem 0xfdffd000-0xfdffd7ff] [ 0.097370] pci 0000:00:1f.2: PME# supported from D3hot [ 0.097385] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 0.097397] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit] [ 0.097414] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.097468] pci 0000:01:00.0: [10de:0613] type 0 class 0x000300 [ 0.097480] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.097492] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.097505] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.097513] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f] [ 0.097522] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.097587] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.097590] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.097593] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.097596] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.097627] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.097680] pci 0000:03:00.0: [197b:2363] type 0 class 0x000106 [ 0.097759] pci 0000:03:00.0: reg 24: [mem 0xfdefe000-0xfdefffff] [ 0.097816] pci 0000:03:00.0: PME# supported from D3hot [ 0.097844] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101 [ 0.097866] pci 0000:03:00.1: reg 10: [io 0xef00-0xef07] [ 0.097878] pci 0000:03:00.1: reg 14: [io 0xee00-0xee03] [ 0.097891] pci 0000:03:00.1: reg 18: [io 0xed00-0xed07] [ 0.097903] pci 0000:03:00.1: reg 1c: [io 0xec00-0xec03] [ 0.097915] pci 0000:03:00.1: reg 20: [io 0xeb00-0xeb0f] [ 0.104022] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.104027] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.104031] pci 0000:00:1c.3: bridge window [mem 0xfde00000-0xfdefffff] [ 0.104063] pci 0000:04:01.0: [10b7:9050] type 0 class 0x000200 [ 0.104076] pci 0000:04:01.0: reg 10: [io 0xcf00-0xcf3f] [ 0.104123] pci 0000:04:01.0: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.104146] pci 0000:04:02.0: [4444:0016] type 0 class 0x000400 [ 0.104163] pci 0000:04:02.0: reg 10: [mem 0xf0000000-0xf3ffffff pref] [ 0.104254] pci 0000:04:07.0: [104c:8024] type 0 class 0x000c00 [ 0.104269] pci 0000:04:07.0: reg 10: [mem 0xfddff000-0xfddff7ff] [ 0.104278] pci 0000:04:07.0: reg 14: [mem 0xfddf8000-0xfddfbfff] [ 0.104338] pci 0000:04:07.0: supports D1 D2 [ 0.104339] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot [ 0.104372] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) [ 0.104375] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.104378] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.104383] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.104385] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.104387] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.104389] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.104391] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.104393] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.104408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.104474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.104500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] [ 0.104529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.104596] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.104598] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.104600] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.110306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.110341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.110374] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.110407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.110440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.110473] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.110505] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.110538] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.110593] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.110593] vgaarb: loaded [ 0.110593] vgaarb: bridge control possible 0000:01:00.0 [ 0.110593] SCSI subsystem initialized [ 0.110593] libata version 3.00 loaded. [ 0.110593] usbcore: registered new interface driver usbfs [ 0.110593] usbcore: registered new interface driver hub [ 0.110593] usbcore: registered new device driver usb [ 0.110593] PCI: Using ACPI for IRQ routing [ 0.110593] PCI: pci_cache_line_size set to 64 bytes [ 0.110593] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.110593] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 0.110593] NetLabel: Initializing [ 0.110593] NetLabel: domain hash size = 128 [ 0.110593] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.110593] NetLabel: unlabeled traffic allowed by default [ 0.112023] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.112027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.112031] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.116022] Switching to clocksource hpet [ 0.121585] AppArmor: AppArmor Filesystem Enabled [ 0.121603] pnp: PnP ACPI init [ 0.121617] ACPI: bus type pnp registered [ 0.121679] pnp 00:00: [bus 00-3f] [ 0.121681] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.121682] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.121684] pnp 00:00: [io 0x0d00-0xffff window] [ 0.121686] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.121688] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.121689] pnp 00:00: [mem 0xdff00000-0xfebfffff window] [ 0.121732] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.121784] pnp 00:01: [io 0x0010-0x001f] [ 0.121786] pnp 00:01: [io 0x0022-0x003f] [ 0.121787] pnp 00:01: [io 0x0044-0x005f] [ 0.121791] pnp 00:01: [io 0x0062-0x0063] [ 0.121792] pnp 00:01: [io 0x0065-0x006f] [ 0.121793] pnp 00:01: [io 0x0074-0x007f] [ 0.121795] pnp 00:01: [io 0x0091-0x0093] [ 0.121796] pnp 00:01: [io 0x00a2-0x00bf] [ 0.121798] pnp 00:01: [io 0x00e0-0x00ef] [ 0.121799] pnp 00:01: [io 0x04d0-0x04d1] [ 0.121801] pnp 00:01: [io 0x0290-0x029f] [ 0.121802] pnp 00:01: [io 0x0800-0x087f] [ 0.121803] pnp 00:01: [io 0x0290-0x0294] [ 0.121805] pnp 00:01: [io 0x0880-0x088f] [ 0.121854] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.121857] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.121859] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.121861] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.121863] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.121865] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.121874] pnp 00:02: [dma 4] [ 0.121875] pnp 00:02: [io 0x0000-0x000f] [ 0.121877] pnp 00:02: [io 0x0080-0x0090] [ 0.121878] pnp 00:02: [io 0x0094-0x009f] [ 0.121880] pnp 00:02: [io 0x00c0-0x00df] [ 0.121903] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.121938] pnp 00:03: [irq 0 disabled] [ 0.121947] pnp 00:03: [irq 8] [ 0.121948] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.121971] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.121989] pnp 00:04: [io 0x0070-0x0073] [ 0.122012] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.122019] pnp 00:05: [io 0x0061] [ 0.122042] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.122049] pnp 00:06: [io 0x00f0-0x00ff] [ 0.122053] pnp 00:06: [irq 13] [ 0.122076] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.122292] pnp 00:07: [io 0x0400-0x04cf] [ 0.122294] pnp 00:07: [io 0x04d2-0x04ff] [ 0.122330] system 00:07: [io 0x0400-0x04cf] has been reserved [ 0.122332] system 00:07: [io 0x04d2-0x04ff] has been reserved [ 0.122335] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122458] pnp 00:08: [mem 0xf4000000-0xf7ffffff] [ 0.122503] system 00:08: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.122506] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122605] pnp 00:09: [mem 0x000d6000-0x000d7fff] [ 0.122607] pnp 00:09: [mem 0x000f0000-0x000f7fff] [ 0.122609] pnp 00:09: [mem 0x000f8000-0x000fbfff] [ 0.122610] pnp 00:09: [mem 0x000fc000-0x000fffff] [ 0.122612] pnp 00:09: [mem 0xdfee0000-0xdfefffff] [ 0.122614] pnp 00:09: [mem 0x00000000-0x0009ffff] [ 0.122615] pnp 00:09: [mem 0x00100000-0xdfedffff] [ 0.122617] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.122618] pnp 00:09: [mem 0xfed10000-0xfed1dfff] [ 0.122619] pnp 00:09: [mem 0xfed20000-0xfed8ffff] [ 0.122621] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.122622] pnp 00:09: [mem 0xffb00000-0xffb7ffff] [ 0.122624] pnp 00:09: [mem 0xfff00000-0xffffffff] [ 0.122625] pnp 00:09: [mem 0x000e0000-0x000effff] [ 0.122676] system 00:09: [mem 0x000d6000-0x000d7fff] has been reserved [ 0.122678] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.122680] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.122683] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.122685] system 00:09: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.122687] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.122689] system 00:09: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.122691] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.122693] system 00:09: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.122696] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.122698] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.122700] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.122702] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.122704] system 00:09: [mem 0x000e0000-0x000effff] has been reserved [ 0.122707] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.122720] pnp 00:0a: [mem 0xffb80000-0xffbfffff] [ 0.122750] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active) [ 0.122754] pnp: PnP ACPI: found 11 devices [ 0.122756] ACPI: ACPI bus type pnp unregistered [ 0.128920] PCI: max bus depth: 1 pci_try_num: 2 [ 0.128946] pci 0000:00:1c.3: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.128949] pci 0000:00:1c.0: BAR 14: assigned [mem 0xfc200000-0xfc3fffff] [ 0.128952] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.128954] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.128957] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref] [ 0.128959] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.128961] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff] [ 0.128964] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff] [ 0.128967] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.128970] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.128972] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.128976] pci 0000:00:1c.0: bridge window [mem 0xfc200000-0xfc3fffff] [ 0.128979] pci 0000:00:1c.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.128984] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 0.128987] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff] [ 0.128990] pci 0000:00:1c.3: bridge window [mem 0xfde00000-0xfdefffff] [ 0.128994] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.128999] pci 0000:04:01.0: BAR 6: assigned [mem 0xfdd00000-0xfdd0ffff pref] [ 0.129001] pci 0000:00:1e.0: PCI bridge to [bus 04-04] [ 0.129003] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff] [ 0.129007] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.129010] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.129026] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.129038] pci 0000:00:1e.0: setting latency timer to 64 [ 0.129041] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.129043] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.129045] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.129046] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.129048] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.129050] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.129052] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff] [ 0.129054] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.129056] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.129058] pci_bus 0000:02: resource 1 [mem 0xfc200000-0xfc3fffff] [ 0.129059] pci_bus 0000:02: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.129061] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.129063] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] [ 0.129065] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.129067] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.129069] pci_bus 0000:04: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.129071] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] [ 0.129073] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.129075] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.129076] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.129078] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.129080] pci_bus 0000:04: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.129103] NET: Registered protocol family 2 [ 0.129210] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.130027] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.132791] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.133157] TCP: Hash tables configured (established 524288 bind 65536) [ 0.133159] TCP reno registered [ 0.133166] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.133198] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.133304] NET: Registered protocol family 1 [ 0.164045] pci 0000:01:00.0: Boot video device [ 0.164061] PCI: CLS 4 bytes, default 64 [ 0.164116] Trying to unpack rootfs image as initramfs... [ 0.468111] Freeing initrd memory: 20180k freed [ 0.473770] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.473775] Placing 64MB software IO TLB between ffff8800dbeda000 - ffff8800dfeda000 [ 0.473777] software IO TLB at phys 0xdbeda000 - 0xdfeda000 [ 0.474161] audit: initializing netlink socket (disabled) [ 0.474174] type=2000 audit(1332394539.468:1): initialized [ 0.492746] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.494506] VFS: Disk quotas dquot_6.5.2 [ 0.494547] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.494907] fuse init (API version 7.18) [ 0.494977] msgmni has been set to 7900 [ 0.495275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.495303] io scheduler noop registered [ 0.495305] io scheduler deadline registered [ 0.495348] io scheduler cfq registered (default) [ 0.495451] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.495515] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.495589] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.495650] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.495665] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.495708] intel_idle: MWAIT substates: 0x22220 [ 0.495710] intel_idle: does not run on family 6 model 23 [ 0.495772] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.495777] ACPI: Power Button [PWRB] [ 0.495822] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.495824] ACPI: Power Button [PWRF] [ 0.495873] Marking TSC unstable due to TSC halts in idle [ 0.495878] ACPI: acpi_idle registered with cpuidle [ 0.496817] GHES: HEST is not enabled! [ 0.496872] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.497982] Linux agpgart interface v0.103 [ 0.499149] brd: module loaded [ 0.499700] loop: module loaded [ 0.499782] ahci 0000:00:1f.2: version 3.0 [ 0.499817] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.499856] ahci: SSS flag set, parallel bus scan disabled [ 0.499884] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.499887] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 0.499891] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.536462] scsi0 : ahci [ 0.536526] scsi1 : ahci [ 0.536581] scsi2 : ahci [ 0.536636] scsi3 : ahci [ 0.536690] scsi4 : ahci [ 0.536744] scsi5 : ahci [ 0.536841] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 43 [ 0.536844] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 43 [ 0.536846] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 43 [ 0.536848] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 43 [ 0.536850] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 43 [ 0.536853] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 43 [ 0.552035] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.552039] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.552303] scsi6 : ahci [ 0.552360] scsi7 : ahci [ 0.552419] ata7: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 19 [ 0.552422] ata8: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 19 [ 0.552496] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.552710] Fixed MDIO Bus: probed [ 0.552722] tun: Universal TUN/TAP device driver, 1.6 [ 0.552723] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.552762] PPP generic driver version 2.4.2 [ 0.552837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.552856] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.552859] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.552894] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.556793] ehci_hcd 0000:00:1a.7: cache line size of 4 is not supported [ 0.556803] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 0.568013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.568157] hub 1-0:1.0: USB hub found [ 0.568162] hub 1-0:1.0: 6 ports detected [ 0.568231] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.568234] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.568269] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.572174] ehci_hcd 0000:00:1d.7: cache line size of 4 is not supported [ 0.572184] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 0.584015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.584128] hub 2-0:1.0: USB hub found [ 0.584132] hub 2-0:1.0: 6 ports detected [ 0.584201] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.584210] uhci_hcd: USB Universal Host Controller Interface driver [ 0.584226] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.584229] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.584262] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.584288] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 0.584376] hub 3-0:1.0: USB hub found [ 0.584379] hub 3-0:1.0: 2 ports detected [ 0.584434] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.584437] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.584471] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.584499] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 0.584587] hub 4-0:1.0: USB hub found [ 0.584589] hub 4-0:1.0: 2 ports detected [ 0.584642] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.584644] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.584677] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.584697] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 0.584791] hub 5-0:1.0: USB hub found [ 0.584794] hub 5-0:1.0: 2 ports detected [ 0.584845] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.584847] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.584882] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.584903] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 0.584994] hub 6-0:1.0: USB hub found [ 0.584997] hub 6-0:1.0: 2 ports detected [ 0.585051] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.585053] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.585091] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.585111] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 0.585199] hub 7-0:1.0: USB hub found [ 0.585202] hub 7-0:1.0: 2 ports detected [ 0.585253] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.585256] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.585288] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.585308] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 0.585396] hub 8-0:1.0: USB hub found [ 0.585399] hub 8-0:1.0: 2 ports detected [ 0.585482] usbcore: registered new interface driver libusual [ 0.585513] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.585856] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.585862] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.585989] mousedev: PS/2 mouse device common for all mice [ 0.586127] rtc_cmos 00:04: RTC can wake from S4 [ 0.586208] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.586229] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.586283] device-mapper: uevent: version 1.0.3 [ 0.586335] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.586356] cpuidle: using governor ladder [ 0.586378] cpuidle: using governor menu [ 0.586380] EFI Variables Facility v0.08 2004-May-17 [ 0.586535] TCP cubic registered [ 0.586616] NET: Registered protocol family 10 [ 0.586979] NET: Registered protocol family 17 [ 0.586988] Registering the dns_resolver key type [ 0.587083] PM: Hibernation image not present or could not be loaded. [ 0.587093] registered taskstats version 1 [ 0.591496] Magic number: 4:192:568 [ 0.591578] rtc_cmos 00:04: setting system clock to 2012-03-22 05:35:40 UTC (1332394540) [ 0.592715] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.592716] EDD information not available. [ 0.872031] ata7: SATA link down (SStatus 0 SControl 300) [ 0.872064] ata8: SATA link down (SStatus 0 SControl 300) [ 0.936015] usb 1-5: new high-speed USB device number 3 using ehci_hcd [ 1.028017] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.030026] ata1.00: ATA-8: WDC WD7501AALS-00E3A0, 05.01D05, max UDMA/133 [ 1.030030] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.031107] ata1.00: configured for UDMA/133 [ 1.031229] scsi 0:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 1.031357] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.031377] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.031411] sd 0:0:0:0: [sda] Write Protect is off [ 1.031414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.031438] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.063597] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 1.063982] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.068755] hub 1-5:1.0: USB hub found [ 1.068848] hub 1-5:1.0: 4 ports detected [ 1.364015] usb 3-1: new low-speed USB device number 2 using uhci_hcd [ 1.520017] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.520750] ata2.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133 [ 1.520753] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.521560] ata2.00: configured for UDMA/133 [ 1.521650] scsi 1:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5 [ 1.521755] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.521778] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.521808] sd 1:0:0:0: [sdb] Write Protect is off [ 1.521811] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.521845] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.526924] sdb: sdb1 [ 1.527126] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.788013] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 2.012018] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.012825] ata3.00: HPA detected: current 976771055, native 976773168 [ 2.012896] ata3.00: ATA-8: WDC WD5000AAKS-00A7B0, 01.03B01, max UDMA/133 [ 2.012900] ata3.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.013861] ata3.00: configured for UDMA/133 [ 2.013952] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5 [ 2.014063] sd 2:0:0:0: [sdc] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 2.014089] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.014116] sd 2:0:0:0: [sdc] Write Protect is off [ 2.014119] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.014145] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.066104] sdc: sdc1 [ 2.066328] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.504016] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.504682] ata4.00: HPA detected: current 1953523055, native 1953525168 [ 2.504750] ata4.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133 [ 2.504754] ata4.00: 1953523055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.505561] ata4.00: configured for UDMA/133 [ 2.505649] scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 [ 2.505751] sd 3:0:0:0: [sdd] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.505778] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 2.505803] sd 3:0:0:0: [sdd] Write Protect is off [ 2.505806] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.505833] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.515058] sdd: sdd1 [ 2.515251] sd 3:0:0:0: [sdd] Attached SCSI disk [ 2.824018] ata5: SATA link down (SStatus 0 SControl 300) [ 3.144017] ata6: SATA link down (SStatus 0 SControl 300) [ 3.145354] Freeing unused kernel memory: 912k freed [ 3.145561] Write protecting the kernel read-only data: 12288k [ 3.149808] Freeing unused kernel memory: 1592k freed [ 3.153359] Freeing unused kernel memory: 1220k freed [ 3.165200] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 3.165372] zram: num_devices not specified. Using default: 1 [ 3.165374] zram: Creating 1 devices ... [ 3.167746] udevd[109]: starting version 173 [ 3.228749] 3c59x: Donald Becker and others. [ 3.228756] 0000:04:01.0: 3Com PCI 3c905 Boomerang 100baseTx at 000000000001cf00. [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 3.255549] scsi8 : pata_jmicron [ 3.260534] scsi9 : pata_jmicron [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16 [ 3.293776] Adding 2024288k swap on /dev/zram0. Priority:100 extents:1 across:2024288k SS [ 3.297644] input: USB Laser Wheel Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2 [ 3.297783] generic-usb 0003:1BCF:000A.0003: input,hiddev0,hidraw0: USB HID v1.11 Mouse [USB Laser Wheel Mouse] on usb-0000:00:1d.2-2/input0 [ 3.297801] usbcore: registered new interface driver usbhid [ 3.297803] usbhid: USB HID core driver [ 3.332060] firewire_ohci: Added fw-ohci device 0000:04:07.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.397581] input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input3 [ 3.397653] microsoft 0003:045E:0730.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:1a.0-1/input0 [ 3.428497] input: Microsoft Microsoft® Digital Media Keyboard 3000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input4 [ 3.428561] microsoft 0003:045E:0730.0002: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Keyboard 3000] on usb-0000:00:1a.0-1/input1 [ 3.832100] firewire_core: created device fw0: GUID 00ee724c00001fd0, S400 [ 4.246639] uvesafb: NVIDIA Corporation, G92 Board - 03910050, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 4.356291] uvesafb: VBIOS/hardware supports DDC2 transfers [ 4.453302] uvesafb: monitor limits: vf = 76 Hz, hf = 94 kHz, clk = 210 MHz [ 4.453516] uvesafb: scrolling: redraw [ 4.453523] mtrr: type mismatch for f9000000,1000000 old: write-back new: write-combining [ 4.453526] mtrr: type mismatch for f9000000,800000 old: write-back new: write-combining [ 4.453528] mtrr: type mismatch for f9000000,400000 old: write-back new: write-combining [ 4.453531] mtrr: type mismatch for f9000000,200000 old: write-back new: write-combining [ 4.453533] mtrr: type mismatch for f9000000,100000 old: write-back new: write-combining [ 4.453536] mtrr: type mismatch for f9000000,80000 old: write-back new: write-combining [ 4.453538] mtrr: type mismatch for f9000000,40000 old: write-back new: write-combining [ 4.453541] mtrr: type mismatch for f9000000,20000 old: write-back new: write-combining [ 4.453543] mtrr: type mismatch for f9000000,10000 old: write-back new: write-combining [ 4.453545] mtrr: type mismatch for f9000000,8000 old: write-back new: write-combining [ 4.453548] mtrr: type mismatch for f9000000,4000 old: write-back new: write-combining [ 4.453550] mtrr: type mismatch for f9000000,2000 old: write-back new: write-combining [ 4.453552] mtrr: type mismatch for f9000000,1000 old: write-back new: write-combining [ 4.927670] Console: switching to colour frame buffer device 210x65 [ 4.931167] uvesafb: framebuffer at 0xf9000000, mapped to 0xffffc90006000000, using 13781k, total 14336k [ 4.931168] fb0: VESA VGA frame buffer device [ 5.723637] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 6.790825] init: ureadahead main process (404) terminated with status 5 [ 7.585896] udevd[441]: starting version 173 [ 8.013483] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k [ 8.921260] lp: driver loaded but no devices found [ 9.224671] it87: Found IT8718F chip at 0x290, revision 5 [ 9.224677] it87: VID is disabled (pins used for GPIO) [ 9.224686] it87: Beeping is supported [ 9.248539] device-mapper: multipath: version 1.3.0 loaded [ 9.291012] Linux video capture interface: v2.00 [ 9.552777] ivtv: Start initialization, version 1.4.3 [ 9.552823] ivtv0: Initializing card 0 [ 9.552825] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 9.559004] ivtv0: Unreasonably low latency timer, setting to 64 (was 32) [ 9.612885] tveeprom 0-0050: Hauppauge model 26582, rev F0B2, serial# 9496618 [ 9.612888] tveeprom 0-0050: tuner model is TCL M2523_5N_E (idx 112, type 50) [ 9.612890] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) [ 9.612892] tveeprom 0-0050: audio processor is CX25843 (idx 37) [ 9.612894] tveeprom 0-0050: decoder processor is CX25843 (idx 30) [ 9.612896] tveeprom 0-0050: has no radio [ 9.612898] ivtv0: Autodetected Hauppauge WinTV PVR-150 [ 9.644839] cx25840 0-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) [ 9.707407] i2c-core: driver [tuner] using legacy suspend method [ 9.707409] i2c-core: driver [tuner] using legacy resume method [ 9.711219] tuner 0-0061: Tuner -1 found with type(s) Radio TV. [ 9.796496] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 10.051160] tuner-simple 0-0061: creating new instance [ 10.051163] tuner-simple 0-0061: type set to 50 (TCL 2002N) [ 10.055805] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 10.055916] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 10.055968] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 10.056039] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 10.056042] ivtv0: Initialized card: Hauppauge WinTV PVR-150 [ 10.056110] ivtv: End initialization [ 10.178966] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 10.273371] hda_codec: ALC889A: BIOS auto-probing. [ 10.282818] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 10.282933] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 10.283030] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 10.283126] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 10.283222] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 10.283321] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 10.283420] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 10.283513] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 10.447185] nvidia: module license 'NVIDIA' taints kernel. [ 10.447189] Disabling lock debugging due to kernel taint [ 10.462429] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.462677] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012 [ 11.032281] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 11.232142] ivtv0: Encoder revision: 0x02060039 [ 11.399087] type=1400 audit(1332394551.303:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=921 comm="apparmor_parser" [ 11.399134] type=1400 audit(1332394551.303:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=921 comm="apparmor_parser" [ 11.399174] type=1400 audit(1332394551.303:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=921 comm="apparmor_parser" [ 11.441382] type=1400 audit(1332394551.347:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=920 comm="apparmor_parser" [ 11.441430] type=1400 audit(1332394551.347:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=920 comm="apparmor_parser" [ 11.441473] type=1400 audit(1332394551.347:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=920 comm="apparmor_parser" [ 12.079407] type=1400 audit(1332394551.983:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1067 comm="apparmor_parser" [ 12.093256] type=1400 audit(1332394551.999:9): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1070 comm="apparmor_parser" [ 12.771878] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro [ 12.892882] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 12.949866] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 12.965746] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 13.220543] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 13.302589] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 14.871166] cx25840 0-0044: loaded v4l-cx25840.fw firmware (16382 bytes) [ 15.199055] type=1400 audit(1332394555.103:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1426 comm="apparmor_parser" [ 15.199104] type=1400 audit(1332394555.103:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1426 comm="apparmor_parser" [ 15.628803] ppdev: user-space parallel port driver [ 16.232468] eth0: setting full-duplex. [ 16.744299] audit_printk_skb: 21 callbacks suppressed [ 16.744301] type=1400 audit(1332394556.651:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1478 comm="apparmor_parser" [ 16.744432] type=1400 audit(1332394556.651:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1478 comm="apparmor_parser" [ 16.931086] type=1400 audit(1332394556.835:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1491 comm="apparmor_parser" [ 17.297313] type=1400 audit(1332394557.203:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1493 comm="apparmor_parser" [ 17.297449] type=1400 audit(1332394557.203:23): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1493 comm="apparmor_parser" [ 17.471570] type=1400 audit(1332394557.376:24): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1494 comm="apparmor_parser" [ 17.701579] type=1400 audit(1332394557.608:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1496 comm="apparmor_parser" [ 20.159164] type=1400 audit(1332394560.064:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1437 comm="apparmor_parser" [ 20.159631] type=1400 audit(1332394560.064:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1437 comm="apparmor_parser" [ 20.159934] type=1400 audit(1332394560.064:28): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1437 comm="apparmor_parser" [ 20.513189] init: failsafe main process (1363) killed by TERM signal [ 20.538838] init: apport pre-start process (1597) terminated with status 1 [ 20.540405] init: apport post-stop process (1634) terminated with status 1 [ 20.558898] init: lxdm main process (1607) killed by TERM signal [ 20.560468] init: gdm main process (1631) killed by TERM signal [ 20.678224] Cannot change disksize for initialized device [ 20.678368] init: zramswap pre-start process (1615) terminated with status 1 ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-22 5:44 ` Chris Holland @ 2012-03-23 2:15 ` Robert Hancock 2012-03-23 2:30 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Robert Hancock @ 2012-03-23 2:15 UTC (permalink / raw) To: Chris Holland; +Cc: linux-kernel On Wed, Mar 21, 2012 at 11:44 PM, Chris Holland <bandidoirlandes@gmail.com> wrote: > > On Wed, Mar 21, 2012 at 11:36 PM, Robert Hancock <hancockrwd@gmail.com> wrote: > > On 03/21/2012 10:29 PM, Chris Holland wrote: > >> > >> Please cc me at: bandidoirlandes@gmail.com > >> > >> My optical drives are not working with 3.3 but they worked fine with > >> 3.3rc7 > >> These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ > >> Ubuntu 11.10 > >> > >> Not working > >> Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 > >> 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > >> cat /var/log/dmesg | egrep '(CD|DVD)' > >> [ 0.000000] CD000-EFFFF uncachable > >> > >> Working > >> Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 > >> 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux > >> cat /var/log/dmesg | egrep '(CD|DVD)' > >> [ 0.000000] CD000-EFFFF uncachable > >> [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - > >> 0xCD, should be 0xCC (20120111/tbutils-321) > >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 > >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S > >> SS0B PQ: 0 ANSI: 5 > >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 > >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 > >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW > >> SHW-160P6S PS0A PQ: 0 ANSI: 5 > >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 > >> > >> I tried to do a git bisect but I dont know what I am doing. Might just > >> be my computer acting up. > > > > > > Can you post the full dmesg output from the non-working kernel? > [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 > [ 3.255549] scsi8 : pata_jmicron > [ 3.260534] scsi9 : pata_jmicron > [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 > [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma > 0xeb08 irq 16 Hmm, seems like nothing detected on that port at all. Do you have some output from a working boot? ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 2:15 ` Robert Hancock @ 2012-03-23 2:30 ` Chris Holland 2012-03-23 2:44 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 2:30 UTC (permalink / raw) To: Robert Hancock; +Cc: linux-kernel On Thu, Mar 22, 2012 at 9:15 PM, Robert Hancock <hancockrwd@gmail.com> wrote: > On Wed, Mar 21, 2012 at 11:44 PM, Chris Holland > <bandidoirlandes@gmail.com> wrote: >> >> On Wed, Mar 21, 2012 at 11:36 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >> > On 03/21/2012 10:29 PM, Chris Holland wrote: >> >> >> >> Please cc me at: bandidoirlandes@gmail.com >> >> >> >> My optical drives are not working with 3.3 but they worked fine with >> >> 3.3rc7 >> >> These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ >> >> Ubuntu 11.10 >> >> >> >> Not working >> >> Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 >> >> 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >> >> cat /var/log/dmesg | egrep '(CD|DVD)' >> >> [ 0.000000] CD000-EFFFF uncachable >> >> >> >> Working >> >> Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 >> >> 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >> >> cat /var/log/dmesg | egrep '(CD|DVD)' >> >> [ 0.000000] CD000-EFFFF uncachable >> >> [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - >> >> 0xCD, should be 0xCC (20120111/tbutils-321) >> >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 >> >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S >> >> SS0B PQ: 0 ANSI: 5 >> >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 >> >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 >> >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW >> >> SHW-160P6S PS0A PQ: 0 ANSI: 5 >> >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 >> >> >> >> I tried to do a git bisect but I dont know what I am doing. Might just >> >> be my computer acting up. >> > >> > >> > Can you post the full dmesg output from the non-working kernel? > >> [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 >> [ 3.255549] scsi8 : pata_jmicron >> [ 3.260534] scsi9 : pata_jmicron >> [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 >> [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma >> 0xeb08 irq 16 > > Hmm, seems like nothing detected on that port at all. Do you have some > output from a working boot? Working dmesg http://pastebin.com/jDaMhWXc This is a issue that others are having it seems. https://bugs.archlinux.org/task/29030 https://bugs.archlinux.org/task/29045 I did some work with git bisect but i dont know what i am doing though so this might not be the actual issue last build is going with 4949be16822e92a18ea0cc1616319926628092ee is the first bad commit removed. Waiting to see if it works. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 2:30 ` Chris Holland @ 2012-03-23 2:44 ` Chris Holland 2012-03-23 4:46 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 2:44 UTC (permalink / raw) To: Robert Hancock; +Cc: linux-kernel, bandidoirlandes On Thu, Mar 22, 2012 at 9:30 PM, Chris Holland <bandidoirlandes@gmail.com> wrote: > On Thu, Mar 22, 2012 at 9:15 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >> On Wed, Mar 21, 2012 at 11:44 PM, Chris Holland >> <bandidoirlandes@gmail.com> wrote: >>> >>> On Wed, Mar 21, 2012 at 11:36 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >>> > On 03/21/2012 10:29 PM, Chris Holland wrote: >>> >> >>> >> Please cc me at: bandidoirlandes@gmail.com >>> >> >>> >> My optical drives are not working with 3.3 but they worked fine with >>> >> 3.3rc7 >>> >> These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ >>> >> Ubuntu 11.10 >>> >> >>> >> Not working >>> >> Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 >>> >> 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>> >> cat /var/log/dmesg | egrep '(CD|DVD)' >>> >> [ 0.000000] CD000-EFFFF uncachable >>> >> >>> >> Working >>> >> Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 >>> >> 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>> >> cat /var/log/dmesg | egrep '(CD|DVD)' >>> >> [ 0.000000] CD000-EFFFF uncachable >>> >> [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - >>> >> 0xCD, should be 0xCC (20120111/tbutils-321) >>> >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 >>> >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S >>> >> SS0B PQ: 0 ANSI: 5 >>> >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 >>> >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 >>> >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW >>> >> SHW-160P6S PS0A PQ: 0 ANSI: 5 >>> >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 >>> >> >>> >> I tried to do a git bisect but I dont know what I am doing. Might just >>> >> be my computer acting up. >>> > >>> > >>> > Can you post the full dmesg output from the non-working kernel? >> >>> [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 >>> [ 3.255549] scsi8 : pata_jmicron >>> [ 3.260534] scsi9 : pata_jmicron >>> [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 >>> [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma >>> 0xeb08 irq 16 >> >> Hmm, seems like nothing detected on that port at all. Do you have some >> output from a working boot? > > Working dmesg http://pastebin.com/jDaMhWXc > > This is a issue that others are having it seems. > https://bugs.archlinux.org/task/29030 > https://bugs.archlinux.org/task/29045 > > > I did some work with git bisect but i dont know what i am doing though > so this might not be the actual issue > last build is going with 4949be16822e92a18ea0cc1616319926628092ee is > the first bad commit removed. > Waiting to see if it works. The only thing I saw different between the dmesg output was from the 3.3rc7 [ 5.937329] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 5.946289] scsi8 : pata_jmicron. [ 5.970116] scsi9 : pata_jmicron [ 5.970501] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 [ 5.970503] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16 then you get [ 6.324507] ata9.00: ATAPI: LITE-ON LTR-48246S, SS0B, max UDMA/33 [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 [ 6.340507] ata9.00: configured for UDMA/33 [ 6.372507] ata9.01: configured for UDMA/66 [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S SS0B PQ: 0 ANSI: 5 [ 6.419767] sr0: scsi3-mmc drive: 42x/48x writer cd/rw xa/form2 cdda tray [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 6.419957] sr 8:0:0:0: Attached scsi generic sg4 type 5 [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0A PQ: 0 ANSI: 5 [ 6.429493] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 [ 6.429658] sr 8:0:1:0: Attached scsi generic sg5 type 5 On 3.3 I only get [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 3.255549] scsi8 : pata_jmicron [ 3.260534] scsi9 : pata_jmicron [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16 Or thats how it looks to me ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 2:44 ` Chris Holland @ 2012-03-23 4:46 ` Chris Holland 2012-03-23 5:22 ` Robert Hancock 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 4:46 UTC (permalink / raw) To: Robert Hancock; +Cc: linux-kernel, bandidoirlandes On Thu, Mar 22, 2012 at 9:44 PM, Chris Holland <bandidoirlandes@gmail.com> wrote: > On Thu, Mar 22, 2012 at 9:30 PM, Chris Holland > <bandidoirlandes@gmail.com> wrote: >> On Thu, Mar 22, 2012 at 9:15 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >>> On Wed, Mar 21, 2012 at 11:44 PM, Chris Holland >>> <bandidoirlandes@gmail.com> wrote: >>>> >>>> On Wed, Mar 21, 2012 at 11:36 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >>>> > On 03/21/2012 10:29 PM, Chris Holland wrote: >>>> >> >>>> >> Please cc me at: bandidoirlandes@gmail.com >>>> >> >>>> >> My optical drives are not working with 3.3 but they worked fine with >>>> >> 3.3rc7 >>>> >> These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ >>>> >> Ubuntu 11.10 >>>> >> >>>> >> Not working >>>> >> Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 >>>> >> 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>>> >> cat /var/log/dmesg | egrep '(CD|DVD)' >>>> >> [ 0.000000] CD000-EFFFF uncachable >>>> >> >>>> >> Working >>>> >> Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 >>>> >> 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>>> >> cat /var/log/dmesg | egrep '(CD|DVD)' >>>> >> [ 0.000000] CD000-EFFFF uncachable >>>> >> [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - >>>> >> 0xCD, should be 0xCC (20120111/tbutils-321) >>>> >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 >>>> >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S >>>> >> SS0B PQ: 0 ANSI: 5 >>>> >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 >>>> >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 >>>> >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW >>>> >> SHW-160P6S PS0A PQ: 0 ANSI: 5 >>>> >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 >>>> >> >>>> >> I tried to do a git bisect but I dont know what I am doing. Might just >>>> >> be my computer acting up. >>>> > >>>> > >>>> > Can you post the full dmesg output from the non-working kernel? >>> >>>> [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 >>>> [ 3.255549] scsi8 : pata_jmicron >>>> [ 3.260534] scsi9 : pata_jmicron >>>> [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 >>>> [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma >>>> 0xeb08 irq 16 >>> >>> Hmm, seems like nothing detected on that port at all. Do you have some >>> output from a working boot? >> >> Working dmesg http://pastebin.com/jDaMhWXc >> >> This is a issue that others are having it seems. >> https://bugs.archlinux.org/task/29030 >> https://bugs.archlinux.org/task/29045 >> >> >> I did some work with git bisect but i dont know what i am doing though >> so this might not be the actual issue >> last build is going with 4949be16822e92a18ea0cc1616319926628092ee is >> the first bad commit removed. >> Waiting to see if it works. > > The only thing I saw different between the dmesg output was from the 3.3rc7 > [ 5.937329] pata_jmicron 0000:03:00.1: setting latency timer to 64 > [ 5.946289] scsi8 : pata_jmicron. > [ 5.970116] scsi9 : pata_jmicron > [ 5.970501] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 > [ 5.970503] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma > 0xeb08 irq 16 > > then you get > [ 6.324507] ata9.00: ATAPI: LITE-ON LTR-48246S, SS0B, max UDMA/33 > [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 > [ 6.340507] ata9.00: configured for UDMA/33 > [ 6.372507] ata9.01: configured for UDMA/66 > [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S > SS0B PQ: 0 ANSI: 5 > [ 6.419767] sr0: scsi3-mmc drive: 42x/48x writer cd/rw xa/form2 cdda tray > [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 > [ 6.419957] sr 8:0:0:0: Attached scsi generic sg4 type 5 > [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW > SHW-160P6S PS0A PQ: 0 ANSI: 5 > [ 6.429493] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray > [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 > [ 6.429658] sr 8:0:1:0: Attached scsi generic sg5 type 5 > > > On 3.3 I only get > [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 > [ 3.255549] scsi8 : pata_jmicron > [ 3.260534] scsi9 : pata_jmicron > [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 > [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma > 0xeb08 irq 16 > > Or thats how it looks to me With lots of help on irc I did git bisect reset git revert 4949be16822e cp /boot/config-3.3.0-030300-generic .config make oldconfig fakeroot make deb-pkg seems to fix it.... cat /var/log/dmesg | egrep '(CD|DVD)' [ 0.000000] Linux version 3.3.0+ (root@desktop) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #8 SMP Thu Mar 22 22:06:21 CDT 2012 [ 0.000000] CD000-EFFFF uncachable [ 5.669815] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 [ 5.745430] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S SS0B PQ: 0 ANSI: 5 [ 5.768369] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.768481] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 5.775750] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0A PQ: 0 ANSI: 5 [ 5.778227] sr 8:0:1:0: Attached scsi CD-ROM sr1 But again I don't know what I am doing, and could be completely in the wrong spot. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 4:46 ` Chris Holland @ 2012-03-23 5:22 ` Robert Hancock 2012-03-23 12:49 ` Matthew Garrett 2012-03-23 16:29 ` Matthew Garrett 0 siblings, 2 replies; 21+ messages in thread From: Robert Hancock @ 2012-03-23 5:22 UTC (permalink / raw) To: Chris Holland; +Cc: linux-kernel, mjg, jbarnes On Thu, Mar 22, 2012 at 10:46 PM, Chris Holland <bandidoirlandes@gmail.com> wrote: > On Thu, Mar 22, 2012 at 9:44 PM, Chris Holland > <bandidoirlandes@gmail.com> wrote: >> On Thu, Mar 22, 2012 at 9:30 PM, Chris Holland >> <bandidoirlandes@gmail.com> wrote: >>> On Thu, Mar 22, 2012 at 9:15 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >>>> On Wed, Mar 21, 2012 at 11:44 PM, Chris Holland >>>> <bandidoirlandes@gmail.com> wrote: >>>>> >>>>> On Wed, Mar 21, 2012 at 11:36 PM, Robert Hancock <hancockrwd@gmail.com> wrote: >>>>> > On 03/21/2012 10:29 PM, Chris Holland wrote: >>>>> >> >>>>> >> Please cc me at: bandidoirlandes@gmail.com >>>>> >> >>>>> >> My optical drives are not working with 3.3 but they worked fine with >>>>> >> 3.3rc7 >>>>> >> These are the kernels from http://kernel.ubuntu.com/~kernel-ppa/mainline/ >>>>> >> Ubuntu 11.10 >>>>> >> >>>>> >> Not working >>>>> >> Linux desktop 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 >>>>> >> 01:36:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>>>> >> cat /var/log/dmesg | egrep '(CD|DVD)' >>>>> >> [ 0.000000] CD000-EFFFF uncachable >>>>> >> >>>>> >> Working >>>>> >> Linux desktop 3.3.0-030300rc7-generic #201203101735 SMP Sat Mar 10 >>>>> >> 22:36:28 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux >>>>> >> cat /var/log/dmesg | egrep '(CD|DVD)' >>>>> >> [ 0.000000] CD000-EFFFF uncachable >>>>> >> [ 0.092676] ACPI Warning: Incorrect checksum in table [TAMG] - >>>>> >> 0xCD, should be 0xCC (20120111/tbutils-321) >>>>> >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 >>>>> >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S >>>>> >> SS0B PQ: 0 ANSI: 5 >>>>> >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 >>>>> >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 >>>>> >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW >>>>> >> SHW-160P6S PS0A PQ: 0 ANSI: 5 >>>>> >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 >>>>> >> >>>>> >> I tried to do a git bisect but I dont know what I am doing. Might just >>>>> >> be my computer acting up. >>>>> > >>>>> > >>>>> > Can you post the full dmesg output from the non-working kernel? >>>> >>>>> [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 >>>>> [ 3.255549] scsi8 : pata_jmicron >>>>> [ 3.260534] scsi9 : pata_jmicron >>>>> [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 >>>>> [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma >>>>> 0xeb08 irq 16 >>>> >>>> Hmm, seems like nothing detected on that port at all. Do you have some >>>> output from a working boot? >>> >>> Working dmesg http://pastebin.com/jDaMhWXc >>> >>> This is a issue that others are having it seems. >>> https://bugs.archlinux.org/task/29030 >>> https://bugs.archlinux.org/task/29045 >>> >>> >>> I did some work with git bisect but i dont know what i am doing though >>> so this might not be the actual issue >>> last build is going with 4949be16822e92a18ea0cc1616319926628092ee is >>> the first bad commit removed. >>> Waiting to see if it works. >> >> The only thing I saw different between the dmesg output was from the 3.3rc7 >> [ 5.937329] pata_jmicron 0000:03:00.1: setting latency timer to 64 >> [ 5.946289] scsi8 : pata_jmicron. >> [ 5.970116] scsi9 : pata_jmicron >> [ 5.970501] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 >> [ 5.970503] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma >> 0xeb08 irq 16 >> >> then you get >> [ 6.324507] ata9.00: ATAPI: LITE-ON LTR-48246S, SS0B, max UDMA/33 >> [ 6.324511] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 >> [ 6.340507] ata9.00: configured for UDMA/33 >> [ 6.372507] ata9.01: configured for UDMA/66 >> [ 6.397218] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S >> SS0B PQ: 0 ANSI: 5 >> [ 6.419767] sr0: scsi3-mmc drive: 42x/48x writer cd/rw xa/form2 cdda tray >> [ 6.419770] cdrom: Uniform CD-ROM driver Revision: 3.20 >> [ 6.419898] sr 8:0:0:0: Attached scsi CD-ROM sr0 >> [ 6.419957] sr 8:0:0:0: Attached scsi generic sg4 type 5 >> [ 6.427088] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW >> SHW-160P6S PS0A PQ: 0 ANSI: 5 >> [ 6.429493] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray >> [ 6.429600] sr 8:0:1:0: Attached scsi CD-ROM sr1 >> [ 6.429658] sr 8:0:1:0: Attached scsi generic sg5 type 5 >> >> >> On 3.3 I only get >> [ 3.231464] pata_jmicron 0000:03:00.1: setting latency timer to 64 >> [ 3.255549] scsi8 : pata_jmicron >> [ 3.260534] scsi9 : pata_jmicron >> [ 3.260933] ata9: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16 >> [ 3.260936] ata10: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma >> 0xeb08 irq 16 >> >> Or thats how it looks to me > > With lots of help on irc I did > > git bisect reset > git revert 4949be16822e > cp /boot/config-3.3.0-030300-generic .config > make oldconfig > fakeroot make deb-pkg > > seems to fix it.... > cat /var/log/dmesg | egrep '(CD|DVD)' > [ 0.000000] Linux version 3.3.0+ (root@desktop) (gcc version 4.6.1 > (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #8 SMP Thu Mar 22 22:06:21 CDT 2012 > [ 0.000000] CD000-EFFFF uncachable > [ 5.669815] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 > [ 5.745430] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S > SS0B PQ: 0 ANSI: 5 > [ 5.768369] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 5.768481] sr 8:0:0:0: Attached scsi CD-ROM sr0 > [ 5.775750] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW > SHW-160P6S PS0A PQ: 0 ANSI: 5 > [ 5.778227] sr 8:0:1:0: Attached scsi CD-ROM sr1 > > > But again I don't know what I am doing, and could be completely in the > wrong spot. I think you may have found a valid bad commit causing your issue, which is this one: >From 4949be16822e92a18ea0cc1616319926628092ee Mon Sep 17 00:00:00 2001 From: Matthew Garrett <mjg@redhat.com> Date: Tue, 6 Mar 2012 13:41:49 -0500 Subject: [PATCH] PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled Right now we won't touch ASPM state if ASPM is disabled, except in the case where we find a device that appears to be too old to reliably support ASPM. Right now we'll clear it in that case, which is almost certainly the wrong thing to do. The easiest way around this is just to disable the blacklisting when ASPM is disabled. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> It looks like your system's FADT says it doesn't support ASPM, so we are disabling it: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it and this device (or at least the other function on the same JMicron SATA/PATA controller device) is a pre-PCIe 1.1 device: pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Before this patch we would have been forcing ASPM off on this device, whereas now it appears we'll leave it as it was. Maybe this device busts somehow if ASPM is allowed to be left on for it? Matthew, any thoughts? Maybe this device needs a specific blacklist entry to disable ASPM or something? ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 5:22 ` Robert Hancock @ 2012-03-23 12:49 ` Matthew Garrett 2012-03-23 16:29 ` Matthew Garrett 1 sibling, 0 replies; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 12:49 UTC (permalink / raw) To: Robert Hancock; +Cc: Chris Holland, linux-kernel, jbarnes On Thu, Mar 22, 2012 at 11:22:53PM -0600, Robert Hancock wrote: > pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can > enable it with 'pcie_aspm=force' > > Before this patch we would have been forcing ASPM off on this device, > whereas now it appears we'll leave it as it was. Maybe this device > busts somehow if ASPM is allowed to be left on for it? That shouldn't (in theory) be the case. I'll look into it. -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 5:22 ` Robert Hancock 2012-03-23 12:49 ` Matthew Garrett @ 2012-03-23 16:29 ` Matthew Garrett 2012-03-23 16:48 ` Chris Holland 1 sibling, 1 reply; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 16:29 UTC (permalink / raw) To: Robert Hancock; +Cc: Chris Holland, linux-kernel, jbarnes Can you provide lspci -vvv for the working and non-working cases? -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 16:29 ` Matthew Garrett @ 2012-03-23 16:48 ` Chris Holland 2012-03-23 16:51 ` Matthew Garrett 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 16:48 UTC (permalink / raw) To: Matthew Garrett; +Cc: Robert Hancock, linux-kernel, jbarnes, bandidoirlandes [-- Attachment #1: Type: text/plain, Size: 445 bytes --] On Fri, Mar 23, 2012 at 11:29 AM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > Can you provide lspci -vvv for the working and non-working cases? > > -- > Matthew Garrett | mjg59@srcf.ucam.org The only difference to me is line 97 working Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- not working Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- [-- Attachment #2: lspci.not.working.3.3 --] [-- Type: application/octet-stream, Size: 14234 bytes --] 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at fe00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: Giga-byte Technology GA-EP45-UD3R Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fc200000-fc3fffff Prefetchable memory behind bridge: 00000000fc400000-00000000fc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fb00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fa00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f900 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f700 [size=8] Region 3: I/O ports at f600 [size=4] Region 4: I/O ports at f500 [size=32] Region 5: Memory at fdffd000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 14 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX+] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device c879 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at ef00 [size=8] Region 1: I/O ports at ee00 [size=4] Region 2: I/O ports at ed00 [size=8] Region 3: I/O ports at ec00 [size=4] Region 4: I/O ports at eb00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron Kernel modules: pata_jmicron 04:01.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at cf00 [size=64] [virtual] Expansion ROM at fdd00000 [disabled] [size=64K] Kernel driver in use: 3c59x Kernel modules: 3c59x 04:02.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: ivtv Kernel modules: ivtv 04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci [-- Attachment #3: lspci.working3.3rc7 --] [-- Type: application/octet-stream, Size: 14234 bytes --] 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at fe00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: Giga-byte Technology GA-EP45-UD3R Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fc200000-fc3fffff Prefetchable memory behind bridge: 00000000fc400000-00000000fc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fb00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fa00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f900 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f700 [size=8] Region 3: I/O ports at f600 [size=4] Region 4: I/O ports at f500 [size=32] Region 5: Memory at fdffd000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 14 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX+] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device c879 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at ef00 [size=8] Region 1: I/O ports at ee00 [size=4] Region 2: I/O ports at ed00 [size=8] Region 3: I/O ports at ec00 [size=4] Region 4: I/O ports at eb00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron Kernel modules: pata_jmicron 04:01.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at cf00 [size=64] [virtual] Expansion ROM at fdd00000 [disabled] [size=64K] Kernel driver in use: 3c59x Kernel modules: 3c59x 04:02.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Capabilities: <access denied> Kernel driver in use: ivtv Kernel modules: ivtv 04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 16:48 ` Chris Holland @ 2012-03-23 16:51 ` Matthew Garrett 2012-03-23 17:04 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 16:51 UTC (permalink / raw) To: Chris Holland; +Cc: Robert Hancock, linux-kernel, jbarnes Sorry, can you repeat that as root? The PCIe capability bits aren't user-visible. -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 16:51 ` Matthew Garrett @ 2012-03-23 17:04 ` Chris Holland 2012-03-23 17:20 ` Matthew Garrett 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 17:04 UTC (permalink / raw) To: Matthew Garrett; +Cc: Robert Hancock, linux-kernel, jbarnes, bandidoirlandes [-- Attachment #1: Type: text/plain, Size: 231 bytes --] On Fri, Mar 23, 2012 at 11:51 AM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > Sorry, can you repeat that as root? The PCIe capability bits aren't > user-visible. > > -- > Matthew Garrett | mjg59@srcf.ucam.org Oops Here you go. [-- Attachment #2: root.lspci.working.3.3.rc7 --] [-- Type: application/octet-stream, Size: 27005 bytes --] 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4161 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #8, PowerLimit 75.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at fe00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: Giga-byte Technology GA-EP45-UD3R Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4189 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fc200000-fc3fffff Prefetchable memory behind bridge: 00000000fc400000-00000000fc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #16, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #19, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=04 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fc00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fb00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fa00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f900 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f700 [size=8] Region 3: I/O ports at f600 [size=4] Region 4: I/O ports at f500 [size=32] Region 5: Memory at fdffd000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee0300c Data: 4179 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 14 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX+] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device c879 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [128 v1] Power Budgeting <?> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: ahci 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at ef00 [size=8] Region 1: I/O ports at ee00 [size=4] Region 2: I/O ports at ed00 [size=8] Region 3: I/O ports at ec00 [size=4] Region 4: I/O ports at eb00 [size=16] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_jmicron Kernel modules: pata_jmicron 04:01.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at cf00 [size=64] [virtual] Expansion ROM at fdd00000 [disabled] [size=64K] Kernel driver in use: 3c59x Kernel modules: 3c59x 04:02.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ivtv Kernel modules: ivtv 04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci [-- Attachment #3: root.lspci.not.working.3.3 --] [-- Type: application/octet-stream, Size: 26996 bytes --] 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4161 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #8, PowerLimit 75.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at fe00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: Giga-byte Technology GA-EP45-UD3R Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4189 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fc200000-fc3fffff Prefetchable memory behind bridge: 00000000fc400000-00000000fc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #16, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #19, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=04 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fc00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fb00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fa00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f900 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f700 [size=8] Region 3: I/O ports at f600 [size=4] Region 4: I/O ports at f500 [size=32] Region 5: Memory at fdffd000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee0300c Data: 4179 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 14 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX+] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device c879 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [128 v1] Power Budgeting <?> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nvidia Kernel modules: nvidia_current, nouveau, nvidiafb 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: ahci 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at ef00 [size=8] Region 1: I/O ports at ee00 [size=4] Region 2: I/O ports at ed00 [size=8] Region 3: I/O ports at ec00 [size=4] Region 4: I/O ports at eb00 [size=16] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_jmicron Kernel modules: pata_jmicron 04:01.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at cf00 [size=64] [virtual] Expansion ROM at fdd00000 [disabled] [size=64K] Kernel driver in use: 3c59x Kernel modules: 3c59x 04:02.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ivtv Kernel modules: ivtv 04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 17:04 ` Chris Holland @ 2012-03-23 17:20 ` Matthew Garrett 2012-03-23 19:12 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 17:20 UTC (permalink / raw) To: Chris Holland; +Cc: Robert Hancock, linux-kernel, jbarnes Ok, this is very odd - ASPM is disabled in both cases. The only thing I can think of here is that the hardware dislikes us writing to the registers? Can you test this patch on top of the broken kernel? diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 24f049e..04eb680 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -185,6 +185,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) int ppos, cpos, same_clock = 1; u16 reg16, parent_reg, child_reg[8]; unsigned long start_jiffies; + bool retrain = false; struct pci_dev *child, *parent = link->pdev; struct pci_bus *linkbus = parent->subordinate; /* @@ -215,7 +216,10 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; - pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); + if (reg16 != child_reg[PCI_FUNC(child->devfn)]) { + retrain = true; + pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); + } } /* Configure upstream component */ @@ -225,9 +229,15 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; - pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); + if (reg16 != parent_reg) { + retrain = true; + pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); + } /* Retrain link */ + if (!retrain) + return; + reg16 |= PCI_EXP_LNKCTL_RL; pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); @@ -436,13 +446,16 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) { - u16 reg16; + u16 reg16, orig_reg16; int pos = pci_pcie_cap(pdev); pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + orig_reg16 = reg16; reg16 &= ~0x3; reg16 |= val; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + + if (reg16 != orig_reg16) + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); } static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply related [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 17:20 ` Matthew Garrett @ 2012-03-23 19:12 ` Chris Holland 2012-03-23 19:17 ` Matthew Garrett 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 19:12 UTC (permalink / raw) To: Matthew Garrett; +Cc: Robert Hancock, linux-kernel, jbarnes, Chris Holland [-- Attachment #1: Type: text/plain, Size: 3549 bytes --] On Fri, Mar 23, 2012 at 12:20 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > Ok, this is very odd - ASPM is disabled in both cases. The only thing I > can think of here is that the hardware dislikes us writing to the > registers? Can you test this patch on top of the broken kernel? > > diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c > index 24f049e..04eb680 100644 > --- a/drivers/pci/pcie/aspm.c > +++ b/drivers/pci/pcie/aspm.c > @@ -185,6 +185,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) > int ppos, cpos, same_clock = 1; > u16 reg16, parent_reg, child_reg[8]; > unsigned long start_jiffies; > + bool retrain = false; > struct pci_dev *child, *parent = link->pdev; > struct pci_bus *linkbus = parent->subordinate; > /* > @@ -215,7 +216,10 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) > reg16 |= PCI_EXP_LNKCTL_CCC; > else > reg16 &= ~PCI_EXP_LNKCTL_CCC; > - pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); > + if (reg16 != child_reg[PCI_FUNC(child->devfn)]) { > + retrain = true; > + pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); > + } > } > > /* Configure upstream component */ > @@ -225,9 +229,15 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) > reg16 |= PCI_EXP_LNKCTL_CCC; > else > reg16 &= ~PCI_EXP_LNKCTL_CCC; > - pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); > + if (reg16 != parent_reg) { > + retrain = true; > + pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); > + } > > /* Retrain link */ > + if (!retrain) > + return; > + > reg16 |= PCI_EXP_LNKCTL_RL; > pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); > > @@ -436,13 +446,16 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) > > static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) > { > - u16 reg16; > + u16 reg16, orig_reg16; > int pos = pci_pcie_cap(pdev); > > pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); > + orig_reg16 = reg16; > reg16 &= ~0x3; > reg16 |= val; > - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); > + > + if (reg16 != orig_reg16) > + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); > } > > static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) > > -- > Matthew Garrett | mjg59@srcf.ucam.org git apply patch1 make oldconfig fakeroot make deb-pkg reboot cat /var/log/dmesg | egrep '(CD|DVD)' [ 0.000000] Linux version 3.3.0+ (root@desktop) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #9 SMP Fri Mar 23 13:35:53 CDT 2012 [ 0.000000] CD000-EFFFF uncachable [ 5.686638] ata9.01: ATAPI: LITE-ON DVDRW SHW-160P6S, PS0A, max UDMA/66 [ 5.760581] scsi 8:0:0:0: CD-ROM LITE-ON LTR-48246S SS0B PQ: 0 ANSI: 5 [ 5.783482] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.783589] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 5.790804] scsi 8:0:1:0: CD-ROM LITE-ON DVDRW SHW-160P6S PS0A PQ: 0 ANSI: 5 [ 5.793286] sr 8:0:1:0: Attached scsi CD-ROM sr1 [-- Attachment #2: lspci.with.patch --] [-- Type: text/x-diff, Size: 26619 bytes --] 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f8000000-fbffffff Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4161 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #8, PowerLimit 75.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at fe00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller Subsystem: Giga-byte Technology GA-EP45-UD3R Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4189 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fc200000-fc3fffff Prefetchable memory behind bridge: 00000000fc400000-00000000fc5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #16, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #19, PowerLimit 10.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 4171 Capabilities: [90] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=04 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fc00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fb00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fa00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fdd00000-fddfffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at f900 [size=8] Region 1: I/O ports at f800 [size=4] Region 2: I/O ports at f700 [size=8] Region 3: I/O ports at f600 [size=4] Region 4: I/O ports at f500 [size=32] Region 5: Memory at fdffd000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee0100c Data: 4179 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 14 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 9800 GTX+] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device c879 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at df00 [size=128] [virtual] Expansion ROM at fb000000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [128 v1] Power Budgeting <?> Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel modules: nouveau, nvidiafb 03:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 19 Region 5: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: ahci 03:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 16 Region 0: I/O ports at ef00 [size=8] Region 1: I/O ports at ee00 [size=4] Region 2: I/O ports at ed00 [size=8] Region 3: I/O ports at ec00 [size=4] Region 4: I/O ports at eb00 [size=16] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_jmicron Kernel modules: pata_jmicron 04:01.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at cf00 [size=64] [virtual] Expansion ROM at fdd00000 [disabled] [size=64K] Kernel driver in use: 3c59x Kernel modules: 3c59x 04:02.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR 150 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (32000ns min, 2000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ivtv Kernel modules: ivtv 04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fddf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+ Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 19:12 ` Chris Holland @ 2012-03-23 19:17 ` Matthew Garrett 2012-03-23 19:20 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 19:17 UTC (permalink / raw) To: Chris Holland; +Cc: Robert Hancock, linux-kernel, jbarnes Ok, so applying this on an otherwise broken kernel makes it all work? -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 19:17 ` Matthew Garrett @ 2012-03-23 19:20 ` Chris Holland 2012-03-23 19:21 ` Matthew Garrett 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 19:20 UTC (permalink / raw) To: Matthew Garrett; +Cc: Robert Hancock, linux-kernel, jbarnes On Fri, Mar 23, 2012 at 2:17 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > Ok, so applying this on an otherwise broken kernel makes it all work? > > -- > Matthew Garrett | mjg59@srcf.ucam.org Looks like it. If I did things correctly. How would I check and make sure? Start fresh, patch, and rebuild? ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 19:20 ` Chris Holland @ 2012-03-23 19:21 ` Matthew Garrett 2012-03-23 20:10 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 19:21 UTC (permalink / raw) To: Chris Holland; +Cc: Robert Hancock, linux-kernel, jbarnes On Fri, Mar 23, 2012 at 02:20:46PM -0500, Chris Holland wrote: > On Fri, Mar 23, 2012 at 2:17 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > > Ok, so applying this on an otherwise broken kernel makes it all work? > > > > -- > > Matthew Garrett | mjg59@srcf.ucam.org > > Looks like it. If I did things correctly. How would I check and make sure? > Start fresh, patch, and rebuild? As long as you were starting with the 3.3 source and hadn't reverted anything, that's fine. -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 19:21 ` Matthew Garrett @ 2012-03-23 20:10 ` Chris Holland 2012-03-23 20:12 ` Matthew Garrett 0 siblings, 1 reply; 21+ messages in thread From: Chris Holland @ 2012-03-23 20:10 UTC (permalink / raw) To: Matthew Garrett; +Cc: Robert Hancock, linux-kernel, jbarnes On Fri, Mar 23, 2012 at 2:21 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > On Fri, Mar 23, 2012 at 02:20:46PM -0500, Chris Holland wrote: >> On Fri, Mar 23, 2012 at 2:17 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: >> > Ok, so applying this on an otherwise broken kernel makes it all work? >> > >> > -- >> > Matthew Garrett | mjg59@srcf.ucam.org >> >> Looks like it. If I did things correctly. How would I check and make sure? >> Start fresh, patch, and rebuild? > > As long as you were starting with the 3.3 source and hadn't reverted > anything, that's fine. > > -- > Matthew Garrett | mjg59@srcf.ucam.org I think I had the commit 4949be16822e92a18ea0cc1616319926628092ee removed when I applied the patch. I did a git reset --hard v3.3 applied the patch and am rebuilding. ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 20:10 ` Chris Holland @ 2012-03-23 20:12 ` Matthew Garrett 2012-03-23 22:33 ` Chris Holland 0 siblings, 1 reply; 21+ messages in thread From: Matthew Garrett @ 2012-03-23 20:12 UTC (permalink / raw) To: Chris Holland; +Cc: Robert Hancock, linux-kernel, jbarnes On Fri, Mar 23, 2012 at 03:10:14PM -0500, Chris Holland wrote: > I think I had the commit 4949be16822e92a18ea0cc1616319926628092ee > removed when I applied the patch. > > I did a > git reset --hard v3.3 > applied the patch and am rebuilding. Thanks - let me know if it helps! -- Matthew Garrett | mjg59@srcf.ucam.org ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic 2012-03-23 20:12 ` Matthew Garrett @ 2012-03-23 22:33 ` Chris Holland 0 siblings, 0 replies; 21+ messages in thread From: Chris Holland @ 2012-03-23 22:33 UTC (permalink / raw) To: Matthew Garrett; +Cc: Robert Hancock, linux-kernel, jbarnes On Fri, Mar 23, 2012 at 3:12 PM, Matthew Garrett <mjg59@srcf.ucam.org> wrote: > On Fri, Mar 23, 2012 at 03:10:14PM -0500, Chris Holland wrote: > >> I think I had the commit 4949be16822e92a18ea0cc1616319926628092ee >> removed when I applied the patch. >> >> I did a >> git reset --hard v3.3 >> applied the patch and am rebuilding. > > Thanks - let me know if it helps! > > -- > Matthew Garrett | mjg59@srcf.ucam.org That did not work for me after I build I still dont get the cd and dvd in dmesg And cat /var/log/dmesg | egrep '(CD|DVD)' [ 0.000000] Linux version 3.3.0+ (root@desktop) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #10 SMP Fri Mar 23 16:09:17 CDT 2012 [ 0.000000] CD000-EFFFF uncachable What I did git reset --hard v3.3 git apply patch1 make oldconfig fakeroot make deb-pkg install reboot git diff diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 24f049e..04eb680 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -185,6 +185,7 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) int ppos, cpos, same_clock = 1; u16 reg16, parent_reg, child_reg[8]; unsigned long start_jiffies; + bool retrain = false; struct pci_dev *child, *parent = link->pdev; struct pci_bus *linkbus = parent->subordinate; /* @@ -215,7 +216,10 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; - pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); + if (reg16 != child_reg[PCI_FUNC(child->devfn)]) { + retrain = true; + pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16); + } } /* Configure upstream component */ @@ -225,9 +229,15 @@ static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; - pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); + if (reg16 != parent_reg) { + retrain = true; + pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); + } /* Retrain link */ + if (!retrain) + return; + reg16 |= PCI_EXP_LNKCTL_RL; pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16); @@ -436,13 +446,16 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) { - u16 reg16; + u16 reg16, orig_reg16; int pos = pci_pcie_cap(pdev); pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + orig_reg16 = reg16; reg16 &= ~0x3; reg16 |= val; - pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); + + if (reg16 != orig_reg16) + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); } static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) git status # On branch master # Your branch is behind 'origin/master' by 3856 commits, and can be fast-forwarded. # # Changes not staged for commit: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: drivers/pci/pcie/aspm.c # # Untracked files: # (use "git add <file>..." to include in what will be committed) # # patch1 no changes added to commit (use "git add" and/or "git commit -a") ^ permalink raw reply related [flat|nested] 21+ messages in thread
end of thread, other threads:[~2012-03-23 22:33 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2012-03-22 4:29 IDE DVD and CD drive seem to not work with Linux desktop 3.3.0-030300-generic Chris Holland 2012-03-22 4:36 ` Robert Hancock 2012-03-22 5:44 ` Chris Holland 2012-03-23 2:15 ` Robert Hancock 2012-03-23 2:30 ` Chris Holland 2012-03-23 2:44 ` Chris Holland 2012-03-23 4:46 ` Chris Holland 2012-03-23 5:22 ` Robert Hancock 2012-03-23 12:49 ` Matthew Garrett 2012-03-23 16:29 ` Matthew Garrett 2012-03-23 16:48 ` Chris Holland 2012-03-23 16:51 ` Matthew Garrett 2012-03-23 17:04 ` Chris Holland 2012-03-23 17:20 ` Matthew Garrett 2012-03-23 19:12 ` Chris Holland 2012-03-23 19:17 ` Matthew Garrett 2012-03-23 19:20 ` Chris Holland 2012-03-23 19:21 ` Matthew Garrett 2012-03-23 20:10 ` Chris Holland 2012-03-23 20:12 ` Matthew Garrett 2012-03-23 22:33 ` Chris Holland
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.