MT7621 ethernet does not get probed on net-next branch after 5.15 merge

MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[DENG Qingfang]

Hi,

After the merge of 5.15.y into net-next, MT7621 ethernet
(mtk_eth_soc.c) does not get probed at all.

Kernel log before 5.15 merge:
...
libphy: Fixed MDIO Bus: probed
libphy: mdio: probed
mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
...

Kernel log after 5.15 merge:
...
libphy: Fixed MDIO Bus: probed
mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
...


I tried adding debug prints into the .mtk_probe function, but it did
not execute.
There are no dts changes for MT7621 between 5.14 and 5.15, so I
believe it should be something else.

Any ideas?

MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[DENG Qingfang]

Hi,

After the merge of 5.15.y into net-next, MT7621 ethernet
(mtk_eth_soc.c) does not get probed at all.

Kernel log before 5.15 merge:
...
libphy: Fixed MDIO Bus: probed
libphy: mdio: probed
mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
...

Kernel log after 5.15 merge:
...
libphy: Fixed MDIO Bus: probed
mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
...


I tried adding debug prints into the .mtk_probe function, but it did
not execute.
There are no dts changes for MT7621 between 5.14 and 5.15, so I
believe it should be something else.

Any ideas?

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Sergio Paracuellos]

Hi Qingfang,

On Fri, Oct 15, 2021 at 4:23 PM DENG Qingfang <dqfext@gmail.com> wrote:
>
> Hi,
>
> After the merge of 5.15.y into net-next, MT7621 ethernet
> (mtk_eth_soc.c) does not get probed at all.
>
> Kernel log before 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> libphy: mdio: probed
> mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
> Kernel log after 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
>
> I tried adding debug prints into the .mtk_probe function, but it did
> not execute.
> There are no dts changes for MT7621 between 5.14 and 5.15, so I
> believe it should be something else.
>
> Any ideas?

Maybe you have a chance to try git bisect to see what is the commit
that introduces that regression and report here?

Best regards,
    Sergio Paracuellos

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Sergio Paracuellos]

Hi Qingfang,

On Fri, Oct 15, 2021 at 4:23 PM DENG Qingfang <dqfext@gmail.com> wrote:
>
> Hi,
>
> After the merge of 5.15.y into net-next, MT7621 ethernet
> (mtk_eth_soc.c) does not get probed at all.
>
> Kernel log before 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> libphy: mdio: probed
> mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
> Kernel log after 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
>
> I tried adding debug prints into the .mtk_probe function, but it did
> not execute.
> There are no dts changes for MT7621 between 5.14 and 5.15, so I
> believe it should be something else.
>
> Any ideas?

Maybe you have a chance to try git bisect to see what is the commit
that introduces that regression and report here?

Best regards,
    Sergio Paracuellos

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Sergio Paracuellos]

Hi Qingfang,

On Fri, Oct 15, 2021 at 4:23 PM DENG Qingfang <dqfext@gmail.com> wrote:
>
> Hi,
>
> After the merge of 5.15.y into net-next, MT7621 ethernet
> (mtk_eth_soc.c) does not get probed at all.
>
> Kernel log before 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> libphy: mdio: probed
> mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
> Kernel log after 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
>
> I tried adding debug prints into the .mtk_probe function, but it did
> not execute.
> There are no dts changes for MT7621 between 5.14 and 5.15, so I
> believe it should be something else.
>
> Any ideas?

I had time to create a new image for my gnubee board using kernel 5.15
and this problem does not exist on my side. Since no more mails have
come for a while I guess this was a problem from your configuration,
but just in case I preferred to answer to let you know. I am currently
using v5.15.7 from linux-stable with some other patches that will be
for 5.16. Just in case, you can check the kernel tree [0] I am
currently using.

Best regards,
     Sergio Paracuellos

[0]: https://github.com/paraka/linux/tree/gbpc1-5.15

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Sergio Paracuellos]

Hi Qingfang,

On Fri, Oct 15, 2021 at 4:23 PM DENG Qingfang <dqfext@gmail.com> wrote:
>
> Hi,
>
> After the merge of 5.15.y into net-next, MT7621 ethernet
> (mtk_eth_soc.c) does not get probed at all.
>
> Kernel log before 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> libphy: mdio: probed
> mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
> Kernel log after 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
>
>
> I tried adding debug prints into the .mtk_probe function, but it did
> not execute.
> There are no dts changes for MT7621 between 5.14 and 5.15, so I
> believe it should be something else.
>
> Any ideas?

I had time to create a new image for my gnubee board using kernel 5.15
and this problem does not exist on my side. Since no more mails have
come for a while I guess this was a problem from your configuration,
but just in case I preferred to answer to let you know. I am currently
using v5.15.7 from linux-stable with some other patches that will be
for 5.16. Just in case, you can check the kernel tree [0] I am
currently using.

Best regards,
     Sergio Paracuellos

[0]: https://github.com/paraka/linux/tree/gbpc1-5.15

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Andrey Jr. Melnikov]

In gmane.comp.embedded.openwrt.devel Sergio Paracuellos <sergio.paracuellos@gmail.com> wrote:
> Hi Qingfang,

> On Fri, Oct 15, 2021 at 4:23 PM DENG Qingfang <dqfext@gmail.com> wrote:
> >
> > Hi,
> >
> > After the merge of 5.15.y into net-next, MT7621 ethernet
> > (mtk_eth_soc.c) does not get probed at all.
> >
> > Kernel log before 5.15 merge:
> > ...
> > libphy: Fixed MDIO Bus: probed
> > libphy: mdio: probed
> > mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> > mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> > mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> > ...
> >
> > Kernel log after 5.15 merge:
> > ...
> > libphy: Fixed MDIO Bus: probed
> > mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> > ...
> >
> >
> > I tried adding debug prints into the .mtk_probe function, but it did
> > not execute.
> > There are no dts changes for MT7621 between 5.14 and 5.15, so I
> > believe it should be something else.
> >
> > Any ideas?

> I had time to create a new image for my gnubee board using kernel 5.15
> and this problem does not exist on my side. Since no more mails have
> come for a while I guess this was a problem from your configuration,
> but just in case I preferred to answer to let you know. I am currently
> using v5.15.7 from linux-stable with some other patches that will be
> for 5.16. Just in case, you can check the kernel tree [0] I am
> currently using.

There is problem with reset controller and devlink commutication. reset
controller is abent in mainline, devlink defer all drivers which use reset
lines until reset-controller become available - so no drivers probed.
I'm create for myself this patch:
https://drive.google.com/file/d/1AiKlfvIgtrBsxtI-2XFBvaxGoE0S-s9d/view?usp=sharing

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Arınç ÜNAL]

This is fixed with the patch series (yet to be applied upstream) in the 
link below.

https://lore.kernel.org/all/20220110114930.1406665-1-sergio.paracuellos@gmail.com/

On 15/10/2021 17:23, DENG Qingfang wrote:
> Hi,
> 
> After the merge of 5.15.y into net-next, MT7621 ethernet
> (mtk_eth_soc.c) does not get probed at all.
> 
> Kernel log before 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> libphy: mdio: probed
> mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
> 
> Kernel log after 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
> 
> 
> I tried adding debug prints into the .mtk_probe function, but it did
> not execute.
> There are no dts changes for MT7621 between 5.14 and 5.15, so I
> believe it should be something else.
> 
> Any ideas?
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: MT7621 ethernet does not get probed on net-next branch after 5.15 merge

[Arınç ÜNAL]

This is fixed with the patch series (yet to be applied upstream) in the 
link below.

https://lore.kernel.org/all/20220110114930.1406665-1-sergio.paracuellos@gmail.com/

On 15/10/2021 17:23, DENG Qingfang wrote:
> Hi,
> 
> After the merge of 5.15.y into net-next, MT7621 ethernet
> (mtk_eth_soc.c) does not get probed at all.
> 
> Kernel log before 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> libphy: mdio: probed
> mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
> mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
> 
> Kernel log after 5.15 merge:
> ...
> libphy: Fixed MDIO Bus: probed
> mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
> ...
> 
> 
> I tried adding debug prints into the .mtk_probe function, but it did
> not execute.
> There are no dts changes for MT7621 between 5.14 and 5.15, so I
> believe it should be something else.
> 
> Any ideas?
>