[U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion

All of lore.kernel.org
 help / color / mirror / Atom feed

* [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion
@ 2019-02-15 22:20 Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 01/22] add missing space in comment Marcel Ziswiler
                   ` (22 more replies)
  0 siblings, 23 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot


This series addresses some shortcomings, enables/introduces device tree
support and converts all except video to using the driver model. This is
fully tested both running our latest downstream BSP as well as the
mainline Linux kernel.

This series is based on Lukasz' previous work on Vybrid [1] and is
available together with his and my previous series addressing Apalis
and Colibri iMX6 on our git server [2].

[1] https://patchwork.ozlabs.org/cover/1041597/
[2] http://git.toradex.com/cgit/u-boot-toradex.git/log/?h=for-next


Bhuvanchandra DV (1):
  colibri_vf: sync the board info message

Gerard Salvatella (1):
  colibri_vf: fix sdboot for vybrid modules

Marcel Ziswiler (12):
  add missing space in comment
  vf610: ddrmc: add missing include
  imx: bootaux: add dependency on vf610
  configs: move CONFIG_USB_EHCI_VF to Kconfig
  configs: colibri_vf: remove obsolete mmc/sd card environment
  configs: colibri_vf: limit size of malloc() pool before relocation
  configs: move CONFIG_MXC_OCOTP to Kconfig
  ARM: dts: colibri_vf: update device trees
  configs: colibri_vf: disable obscure options
  colibri_vf: migrate pinctrl and regulators to dtb/dm
  colibri_vf: migrate fec, esdhc, nfc and usb to driver model
  config: colibri_vf: use macros from linux/sizes.h

Stefan Agner (8):
  colibri_vf: add distroboot support
  colibri_vf: set fdtfile for distroboot
  colibri_vf: enable user debug by default
  colibri_vf: disable undefined instruction events in user debug
  config: colibri_vf: enable mtd partitions via dt
  arm: vf610: add uart2 clock/pinmux support
  colibri_vf: adjust timing according to data sheet
  colibri_vf: use leveling evaluated by DDR validation tools

 arch/arm/dts/vf-colibri-u-boot.dtsi           |  23 ++
 arch/arm/dts/vf-colibri.dtsi                  | 198 +++++++++++++-
 arch/arm/dts/vf500-colibri.dts                |   1 +
 arch/arm/dts/vf610-colibri.dts                |   1 +
 arch/arm/include/asm/arch-vf610/crm_regs.h    |   1 +
 arch/arm/include/asm/arch-vf610/ddrmc-vf610.h |   2 +
 arch/arm/include/asm/arch-vf610/iomux-vf610.h |   6 +-
 arch/arm/mach-imx/Kconfig                     |   2 +-
 board/freescale/imx8qxp_mek/imx8qxp_mek.c     |   2 +-
 board/toradex/colibri_vf/MAINTAINERS          |   4 +-
 board/toradex/colibri_vf/colibri_vf.c         | 241 ++----------------
 configs/bk4r1_defconfig                       |   1 -
 configs/colibri_vf_defconfig                  |  22 +-
 configs/pcm052_defconfig                      |   1 -
 drivers/misc/Kconfig                          |   2 +
 drivers/usb/host/Kconfig                      |   7 +
 drivers/video/videomodes.c                    |   2 +-
 include/configs/advantech_dms-ba16.h          |   2 -
 include/configs/apalis_imx6.h                 |   5 -
 include/configs/colibri_imx6.h                |   5 -
 include/configs/colibri_vf.h                  | 109 ++++----
 include/configs/dh_imx6.h                     |   5 -
 include/configs/ge_bx50v3.h                   |   2 -
 include/configs/imx8mq_evk.h                  |   1 -
 include/configs/kp_imx6q_tpc.h                |   5 -
 include/configs/mx6_common.h                  |   3 -
 include/configs/mx7_common.h                  |   3 -
 include/configs/vf610twr.h                    |   4 -
 scripts/config_whitelist.txt                  |   1 -
 29 files changed, 344 insertions(+), 317 deletions(-)
 create mode 100644 arch/arm/dts/vf-colibri-u-boot.dtsi

-- 
2.20.1

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 01/22] add missing space in comment
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-07  5:29   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
                   ` (21 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Spottet two missing spaces in comments.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/freescale/imx8qxp_mek/imx8qxp_mek.c | 2 +-
 drivers/video/videomodes.c                | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
index a4c587a390..63cd605b6a 100644
--- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
+++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
@@ -112,7 +112,7 @@ void build_info(void)
 	sc_misc_build_info(-1, &sc_build, &sc_commit);
 	if (!sc_build) {
 		printf("SCFW does not support build info\n");
-		sc_commit = 0; /* Display 0 when the build info is not supported*/
+		sc_commit = 0; /* Display 0 when the build info is not supported */
 	}
 	printf("Build: SCFW %x\n", sc_commit);
 }
diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c
index 1cfeaa980f..d7614329ff 100644
--- a/drivers/video/videomodes.c
+++ b/drivers/video/videomodes.c
@@ -397,7 +397,7 @@ int video_edid_dtd_to_ctfb_res_modes(struct edid_detailed_timing *t,
 	    EDID_DETAILED_TIMING_VERTICAL_BLANKING(*t) == 0 ||
 	    EDID_DETAILED_TIMING_HSYNC_OFFSET(*t) == 0 ||
 	    EDID_DETAILED_TIMING_VSYNC_OFFSET(*t) == 0 ||
-	    /* 3d formats are not supported*/
+	    /* 3d formats are not supported */
 	    EDID_DETAILED_TIMING_FLAG_STEREO(*t) != 0)
 		return -EINVAL;
 
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 01/22] add missing space in comment Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-11 13:27   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
                   ` (20 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

The DDR memory controller include file for the Vybrid uses
iomux_v3_cfg_t without actually including iomux-vf610.h.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 arch/arm/include/asm/arch-vf610/ddrmc-vf610.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h b/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
index c7da2b8a5e..03e3cecb95 100644
--- a/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
@@ -10,6 +10,8 @@
 #ifndef __ASM_ARCH_VF610_DDRMC_H
 #define __ASM_ARCH_VF610_DDRMC_H
 
+#include <asm/arch/iomux-vf610.h>
+
 struct ddr3_jedec_timings {
 	u8 tinit;
 	u32 trst_pwron;
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 01/22] add missing space in comment Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-07  5:31   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
                   ` (19 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Allow using bootaux also on VF610 aka Vybrid.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 arch/arm/mach-imx/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index a1566cc2ad..313a886c6b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -23,7 +23,7 @@ config IMX_RDC
 
 config IMX_BOOTAUX
 	bool "Support boot auxiliary core"
-	depends on ARCH_MX7 || ARCH_MX6
+	depends on ARCH_MX7 || ARCH_MX6 || ARCH_VF610
 	help
 	  bootaux [addr] to boot auxiliary core.
 
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (2 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-07  5:39   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
                   ` (18 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one
and only user thereof being colibri_vf.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 drivers/usb/host/Kconfig     | 7 +++++++
 include/configs/colibri_vf.h | 1 -
 scripts/config_whitelist.txt | 1 -
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 60f37f40fd..6cda1cbfbd 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -154,6 +154,13 @@ config USB_EHCI_OMAP
 	  Enables support for the on-chip EHCI controller on OMAP3 and later
 	  SoCs.
 
+config USB_EHCI_VF
+	bool "Support for Vybrid on-chip EHCI USB controller"
+	depends on ARCH_VF610
+	default y
+	help
+	  Enables support for the on-chip EHCI controller on Vybrid SoCs.
+
 if USB_EHCI_MX7
 
 config MXC_USB_OTG_HACTIVE
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 31ff8a00a6..2fe7f217fa 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -159,7 +159,6 @@
 #endif
 
 /* USB Host Support */
-#define CONFIG_USB_EHCI_VF
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 2b3572568b..9ca974bbae 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4533,7 +4533,6 @@ CONFIG_USB_EHCI_SPEAR
 CONFIG_USB_EHCI_TEGRA
 CONFIG_USB_EHCI_TXFIFO_THRESH
 CONFIG_USB_EHCI_VCT
-CONFIG_USB_EHCI_VF
 CONFIG_USB_ETH_QMULT
 CONFIG_USB_ETH_SUBSET
 CONFIG_USB_EXT2_BOOT
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (3 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-11 13:43   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
                   ` (17 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Remove obsolete MMC/SD card environment configuration dating back to
un-fused samples times.

While at it also remove meanwhile spurious "USB Storage" comment.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 2fe7f217fa..7b974d9e97 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -145,13 +145,6 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Environment organization */
-
-#ifdef CONFIG_ENV_IS_IN_MMC
-#define CONFIG_SYS_MMC_ENV_DEV		0
-#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
-#define CONFIG_ENV_SIZE			(8 * 1024)
-#endif
-
 #ifdef CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE			(64 * 2048)
 #define CONFIG_ENV_RANGE		(4 * 64 * 2048)
@@ -165,6 +158,4 @@
 /* USB DFU */
 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 
-/* USB Storage */
-
 #endif /* __CONFIG_H */
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (4 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-07  5:37   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
                   ` (16 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Limit the size of the malloc() pool before relocation
(SYS_MALLOC_F_LEN).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 configs/colibri_vf_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 4192501257..8188582ed9 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_VF610=y
 CONFIG_SYS_TEXT_BASE=0x3f401000
+CONFIG_SYS_MALLOC_F_LEN=0x800
 CONFIG_TARGET_COLIBRI_VF=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
 CONFIG_NR_DRAM_BANKS=1
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (5 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-17 22:38   ` Lukasz Majewski
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 08/22] ARM: dts: colibri_vf: update device trees Marcel Ziswiler
                   ` (15 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig entry")
introduced a Kconfig entry it did not actually migrate all
configurations to using it.

As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on
those architectures. Additionally, also enable it on ARCH_IMX8M and
ARCH_VF610 where all current members enabled it through their legacy
configuration header files.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 configs/bk4r1_defconfig              | 1 -
 configs/pcm052_defconfig             | 1 -
 drivers/misc/Kconfig                 | 2 ++
 include/configs/advantech_dms-ba16.h | 2 --
 include/configs/apalis_imx6.h        | 5 -----
 include/configs/colibri_imx6.h       | 5 -----
 include/configs/colibri_vf.h         | 4 ----
 include/configs/dh_imx6.h            | 5 -----
 include/configs/ge_bx50v3.h          | 2 --
 include/configs/imx8mq_evk.h         | 1 -
 include/configs/kp_imx6q_tpc.h       | 5 -----
 include/configs/mx6_common.h         | 3 ---
 include/configs/mx7_common.h         | 3 ---
 include/configs/vf610twr.h           | 4 ----
 14 files changed, 2 insertions(+), 41 deletions(-)

diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig
index e3852f4856..439207fd39 100644
--- a/configs/bk4r1_defconfig
+++ b/configs/bk4r1_defconfig
@@ -49,7 +49,6 @@ CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
-CONFIG_MXC_OCOTP=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SYS_I2C_EEPROM_BUS=2
diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
index 906abbfd69..fd093b35c2 100644
--- a/configs/pcm052_defconfig
+++ b/configs/pcm052_defconfig
@@ -36,7 +36,6 @@ CONFIG_SYS_I2C_MXC_I2C2=y
 CONFIG_SYS_I2C_MXC_I2C3=y
 CONFIG_SYS_I2C_MXC_I2C4=y
 CONFIG_MISC=y
-CONFIG_MXC_OCOTP=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 CONFIG_SYS_I2C_EEPROM_BUS=2
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 704c8dd195..137baa71f0 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -128,6 +128,8 @@ config JZ4780_EFUSE
 
 config MXC_OCOTP
 	bool "Enable MXC OCOTP Driver"
+	depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_VF610
+	default y
 	help
 	  If you say Y here, you will get support for the One Time
 	  Programmable memory pages that are stored on the some
diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index 0c9de6125d..a22c6a7d45 100644
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -34,8 +34,6 @@
 
 #define CONFIG_MXC_UART
 
-#define CONFIG_MXC_OCOTP
-
 /* SATA Configs */
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index c8aa1bdddf..95dd6f9362 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -41,11 +41,6 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_MXC_I2C3_SPEED	400000
 
-/* OCOTP Configs */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index a6a823ee1f..d2f8a58e80 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -39,11 +39,6 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_MXC_I2C3_SPEED	400000
 
-/* OCOTP Configs */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* MMC Configs */
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 7b974d9e97..e7b786e48b 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -17,10 +17,6 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_VIDEO_LOGO
diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 9231bd853f..4dc795c3f4 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -48,11 +48,6 @@
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define CONFIG_ARP_TIMEOUT		200UL
 
-/* Fuses */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index e0e1f713ef..8bbda2788d 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -35,8 +35,6 @@
 
 #define CONFIG_MXC_UART
 
-#define CONFIG_MXC_OCOTP
-
 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index f0430224cb..044a254320 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -231,7 +231,6 @@
 
 #define CONFIG_MXC_GPIO
 
-#define CONFIG_MXC_OCOTP
 #define CONFIG_CMD_FUSE
 
 /* I2C Configs */
diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h
index b6b27ee1d5..d2ebf92953 100644
--- a/include/configs/kp_imx6q_tpc.h
+++ b/include/configs/kp_imx6q_tpc.h
@@ -31,11 +31,6 @@
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define CONFIG_ARP_TIMEOUT		200UL
 
-/* Fuses */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index cdc8833778..6b20c6db58 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -57,9 +57,6 @@
 /* MMC */
 #define CONFIG_FSL_USDHC
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-
 /* Secure boot (HAB) support */
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CSF_SIZE			0x2000
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index a895c936aa..cc7e87269e 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -42,9 +42,6 @@
 /* MMC */
 #define CONFIG_FSL_USDHC
 
-/* Fuses */
-#define CONFIG_MXC_OCOTP
-
 #define CONFIG_ARMV7_SECURE_BASE	0x00900000
 
 #define CONFIG_ARMV7_PSCI_1_0
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index 686a383739..ba85bc91e7 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -19,10 +19,6 @@
 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG
 
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 08/22] ARM: dts: colibri_vf: update device trees
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (6 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 09/22] configs: colibri_vf: disable obscure options Marcel Ziswiler
                   ` (14 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Update device tree in preparation of further driver model migration:
Ethernet FEC, ESDHC aka MMC/SD card, I2C, NFC aka NAND flash controller,
USBH_PEN GPIO regulator.

Add iomux resp. pinctrl entries to be removed from proprietary platform
data: DSPI, ESDHC, FEC, I2C, NFC, UART, USBH_PEN GPIO.

Introduce a U-Boot specific device tree with some required
u-boot,dm-pre-reloc properties: soc, aips0, pinctrl_ddr and uart0 incl.
pinctrl.

While at it also update the MAINTAINERS file.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 arch/arm/dts/vf-colibri-u-boot.dtsi  |  23 ++++
 arch/arm/dts/vf-colibri.dtsi         | 198 ++++++++++++++++++++++++++-
 arch/arm/dts/vf500-colibri.dts       |   1 +
 arch/arm/dts/vf610-colibri.dts       |   1 +
 board/toradex/colibri_vf/MAINTAINERS |   4 +-
 5 files changed, 224 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/vf-colibri-u-boot.dtsi

diff --git a/arch/arm/dts/vf-colibri-u-boot.dtsi b/arch/arm/dts/vf-colibri-u-boot.dtsi
new file mode 100644
index 0000000000..db86739805
--- /dev/null
+++ b/arch/arm/dts/vf-colibri-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+
+/ {
+	soc {
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&aips0 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_ddr {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart0 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart0 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/vf-colibri.dtsi b/arch/arm/dts/vf-colibri.dtsi
index 923dc2451c..5ce17076e9 100644
--- a/arch/arm/dts/vf-colibri.dtsi
+++ b/arch/arm/dts/vf-colibri.dtsi
@@ -1,18 +1,37 @@
 // SPDX-License-Identifier: GPL-2.0+ OR X11
 /*
- * Copyright 2014 Toradex AG
+ * Copyright 2014-2019 Toradex AG
  */
+
+/dts-v1/;
 #include "vf.dtsi"
+#include "vf610-pinfunc.h"
 
 / {
 	chosen {
 		stdout-path = &uart0;
 	};
+
+	aliases {
+		usb0 = &ehci0; /* required for ums */
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN */
+	};
 };
 
 &dspi1 {
-	status = "okay";
 	bus-num = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dspi1>;
+	status = "okay";
 
 	spi_cmd: sspi at 0 {
 		reg = <0>;
@@ -29,8 +48,183 @@
 &ehci1 {
 	dr_mode = "host";
 	status = "okay";
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&esdhc1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6 at 68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ddr>;
+
+	pinctrl_ddr: ddrgrp {
+		fsl,pins = <
+			VF610_PAD_DDR_A15__DDR_A_15             0x180
+			VF610_PAD_DDR_A14__DDR_A_14             0x180
+			VF610_PAD_DDR_A13__DDR_A_13             0x180
+			VF610_PAD_DDR_A12__DDR_A_12             0x180
+			VF610_PAD_DDR_A11__DDR_A_11             0x180
+			VF610_PAD_DDR_A10__DDR_A_10             0x180
+			VF610_PAD_DDR_A9__DDR_A_9               0x180
+			VF610_PAD_DDR_A8__DDR_A_8               0x180
+			VF610_PAD_DDR_A7__DDR_A_7               0x180
+			VF610_PAD_DDR_A6__DDR_A_6               0x180
+			VF610_PAD_DDR_A5__DDR_A_5               0x180
+			VF610_PAD_DDR_A4__DDR_A_4               0x180
+			VF610_PAD_DDR_A3__DDR_A_3               0x180
+			VF610_PAD_DDR_A2__DDR_A_2               0x180
+			VF610_PAD_DDR_A1__DDR_A_1               0x180
+			VF610_PAD_DDR_A0__DDR_A_0               0x180
+			VF610_PAD_DDR_BA2__DDR_BA_2             0x180
+			VF610_PAD_DDR_BA1__DDR_BA_1             0x180
+			VF610_PAD_DDR_BA0__DDR_BA_0             0x180
+			VF610_PAD_DDR_CAS__DDR_CAS_B            0x180
+			VF610_PAD_DDR_CKE__DDR_CKE_0            0x180
+			VF610_PAD_DDR_CLK__DDR_CLK_0            0x180
+			VF610_PAD_DDR_CS__DDR_CS_B_0            0x180
+			VF610_PAD_DDR_D15__DDR_D_15             0x10180
+			VF610_PAD_DDR_D14__DDR_D_14             0x10180
+			VF610_PAD_DDR_D13__DDR_D_13             0x10180
+			VF610_PAD_DDR_D12__DDR_D_12             0x10180
+			VF610_PAD_DDR_D11__DDR_D_11             0x10180
+			VF610_PAD_DDR_D10__DDR_D_10             0x10180
+			VF610_PAD_DDR_D9__DDR_D_9               0x10180
+			VF610_PAD_DDR_D8__DDR_D_8               0x10180
+			VF610_PAD_DDR_D7__DDR_D_7               0x10180
+			VF610_PAD_DDR_D6__DDR_D_6               0x10180
+			VF610_PAD_DDR_D5__DDR_D_5               0x10180
+			VF610_PAD_DDR_D4__DDR_D_4               0x10180
+			VF610_PAD_DDR_D3__DDR_D_3               0x10180
+			VF610_PAD_DDR_D2__DDR_D_2               0x10180
+			VF610_PAD_DDR_D1__DDR_D_1               0x10180
+			VF610_PAD_DDR_D0__DDR_D_0               0x10180
+			VF610_PAD_DDR_DQM1__DDR_DQM_1           0x10180
+			VF610_PAD_DDR_DQM0__DDR_DQM_0           0x10180
+			VF610_PAD_DDR_DQS1__DDR_DQS_1           0x10180
+			VF610_PAD_DDR_DQS0__DDR_DQS_0           0x10180
+			VF610_PAD_DDR_RAS__DDR_RAS_B            0x180
+			VF610_PAD_DDR_WE__DDR_WE_B              0x180
+			VF610_PAD_DDR_ODT1__DDR_ODT_0           0x180
+			VF610_PAD_DDR_ODT0__DDR_ODT_1           0x180
+			VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1    0x180
+			VF610_PAD_DDR_DDRBYTE2__DDR_DDRBYTE2    0x180
+			VF610_PAD_DDR_RESETB                    0x180
+		>;
+	};
+
+	pinctrl_dspi1: dspi1grp {
+		fsl,pins = <
+			VF610_PAD_PTD5__DSPI1_CS0		0x33e2
+			VF610_PAD_PTD6__DSPI1_SIN		0x33e1
+			VF610_PAD_PTD7__DSPI1_SOUT		0x33e2
+			VF610_PAD_PTD8__DSPI1_SCK		0x33e2
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			VF610_PAD_PTA24__ESDHC1_CLK		0x31ef
+			VF610_PAD_PTA25__ESDHC1_CMD		0x31ef
+			VF610_PAD_PTA26__ESDHC1_DAT0		0x31ef
+			VF610_PAD_PTA27__ESDHC1_DAT1		0x31ef
+			VF610_PAD_PTA28__ESDHC1_DATA2		0x31ef
+			VF610_PAD_PTA29__ESDHC1_DAT3		0x31ef
+			VF610_PAD_PTB20__GPIO_42		0x219d
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			VF610_PAD_PTA6__RMII_CLKOUT		0x30df
+			VF610_PAD_PTC9__ENET_RMII1_MDC		0x30df
+			VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30df
+			VF610_PAD_PTC11__ENET_RMII1_CRS		0x30df
+			VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30df
+			VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30df
+			VF610_PAD_PTC14__ENET_RMII1_RXER	0x30df
+			VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30df
+			VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30df
+			VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30df
+		>;
+	};
+
+	pinctrl_i2c0: i2c0grp {
+		fsl,pins = <
+			VF610_PAD_PTB14__I2C0_SCL		0x37ff
+			VF610_PAD_PTB15__I2C0_SDA		0x37ff
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			VF610_PAD_PTD23__NF_IO7			0x28df
+			VF610_PAD_PTD22__NF_IO6			0x28df
+			VF610_PAD_PTD21__NF_IO5			0x28df
+			VF610_PAD_PTD20__NF_IO4			0x28df
+			VF610_PAD_PTD19__NF_IO3			0x28df
+			VF610_PAD_PTD18__NF_IO2			0x28df
+			VF610_PAD_PTD17__NF_IO1			0x28df
+			VF610_PAD_PTD16__NF_IO0			0x28df
+			VF610_PAD_PTB24__NF_WE_B		0x28c2
+			VF610_PAD_PTB25__NF_CE0_B		0x28c2
+			VF610_PAD_PTB27__NF_RE_B		0x28c2
+			VF610_PAD_PTC26__NF_RB_B		0x283d
+			VF610_PAD_PTC27__NF_ALE			0x28c2
+			VF610_PAD_PTC28__NF_CLE			0x28c2
+		>;
+	};
+
+	pinctrl_uart0: uart0grp {
+		fsl,pins = <
+			VF610_PAD_PTB10__UART0_TX		0x11af
+			VF610_PAD_PTB11__UART0_RX		0x11af
+			VF610_PAD_PTB12__UART0_RTS		0x11af
+			VF610_PAD_PTB13__UART0_CTS		0x11af
+		>;
+	};
+
+	pinctrl_usbh1_reg: gpio_usb_vbus {
+		fsl,pins = <
+			VF610_PAD_PTD4__GPIO_83			0x22ed
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	status = "okay";
 };
 
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
 	status = "okay";
 };
diff --git a/arch/arm/dts/vf500-colibri.dts b/arch/arm/dts/vf500-colibri.dts
index 3f33d970e0..c83a16fdcb 100644
--- a/arch/arm/dts/vf500-colibri.dts
+++ b/arch/arm/dts/vf500-colibri.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "vf-colibri.dtsi"
+#include "vf-colibri-u-boot.dtsi"
 
 / {
 	model = "Toradex Colibri VF50";
diff --git a/arch/arm/dts/vf610-colibri.dts b/arch/arm/dts/vf610-colibri.dts
index 0a6b937fee..7275fec279 100644
--- a/arch/arm/dts/vf610-colibri.dts
+++ b/arch/arm/dts/vf610-colibri.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 #include "vf-colibri.dtsi"
+#include "vf-colibri-u-boot.dtsi"
 
 / {
 	model = "Toradex Colibri VF61";
diff --git a/board/toradex/colibri_vf/MAINTAINERS b/board/toradex/colibri_vf/MAINTAINERS
index a1217a47bd..3ee2b33152 100644
--- a/board/toradex/colibri_vf/MAINTAINERS
+++ b/board/toradex/colibri_vf/MAINTAINERS
@@ -1,10 +1,12 @@
 Colibri VFxx
 M:	Stefan Agner <stefan.agner@toradex.com>
+W:	http://developer.toradex.com/software/linux/linux-software
+W:      https://www.toradex.com/community
 S:	Maintained
 F:	board/toradex/colibri_vf/
 F:	include/configs/colibri_vf.h
 F:	configs/colibri_vf_defconfig
-F:	configs/colibri_vf_dtb_defconfig
 F:	arch/arm/dts/vf-colibri.dtsi
+F:	arch/arm/dts/vf-colibri-u-boot.dtsi
 F:	arch/arm/dts/vf500-colibri.dts
 F:	arch/arm/dts/vf610-colibri.dts
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 09/22] configs: colibri_vf: disable obscure options
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (7 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 08/22] ARM: dts: colibri_vf: update device trees Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
                   ` (13 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Disable more obscure options to save another 26 KB in preparation of
the upcoming driver model migration.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 configs/colibri_vf_defconfig | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 8188582ed9..706d7ca634 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -17,11 +17,17 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMDLINE_EDITING is not set
 # CONFIG_AUTO_COMPLETE is not set
+# CONFIG_SYS_LONGHELP is not set
 CONFIG_SYS_PROMPT="Colibri VFxx # "
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTM is not set
 CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 # CONFIG_CMD_LOADB is not set
@@ -46,10 +52,10 @@ CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM=y
-CONFIG_DFU_MMC=y
 CONFIG_DFU_NAND=y
 CONFIG_DM_GPIO=y
 CONFIG_VYBRID_GPIO=y
+# CONFIG_MMC_HW_PARTITIONING is not set
 CONFIG_FSL_ESDHC=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
@@ -57,6 +63,8 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_MII=y
+# CONFIG_SPL_SERIAL_PRESENT is not set
+# CONFIG_TPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_FSL_LPUART=y
 CONFIG_USB=y
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (8 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 09/22] configs: colibri_vf: disable obscure options Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model Marcel Ziswiler
                   ` (12 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Migrate pinctrl and regulators to device tree resp. driver model: DDR,
DSPI, ENET, ESDHC, I2C, NFC and UART.

Enable CMD_DM, PINCTRL and DM_REGULATOR.

While at it also update copyright period and sort include files.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_vf/colibri_vf.c | 139 ++------------------------
 configs/colibri_vf_defconfig          |   5 +
 2 files changed, 16 insertions(+), 128 deletions(-)

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 19cf748c5d..c9de3c0c76 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -1,43 +1,36 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2015 Toradex, Inc.
+ * Copyright 2015-2019 Toradex, Inc.
  *
  * Based on vf610twr.c:
  * Copyright 2013 Freescale Semiconductor, Inc.
  */
 
 #include <common.h>
-#include <asm/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/ddrmc-vf610.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux-vf610.h>
-#include <asm/arch/ddrmc-vf610.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <mmc.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
 #include <fdt_support.h>
 #include <fsl_esdhc.h>
 #include <fsl_dcu_fb.h>
+#include <g_dnl.h>
+#include <i2c.h>
 #include <jffs2/load_kernel.h>
 #include <miiphy.h>
+#include <mmc.h>
 #include <mtd_node.h>
 #include <netdev.h>
-#include <i2c.h>
-#include <g_dnl.h>
-#include <asm/gpio.h>
 #include <usb.h>
+
 #include "../common/tdx-common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define UART_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
-			PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE)
-
-#define ESDHC_PAD_CTRL	(PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
-			PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
-
-#define ENET_PAD_CTRL	(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
-			PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
-
 #define USB_PEN_GPIO           83
 #define USB_CDET_GPIO		102
 
@@ -88,11 +81,6 @@ static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
 	{ 0, -1 }
 };
 
-static const iomux_v3_cfg_t usb_pads[] = {
-	VF610_PAD_PTD4__GPIO_83,
-	VF610_PAD_PTC29__GPIO_102,
-};
-
 int dram_init(void)
 {
 	static const struct ddr3_jedec_timings timings = {
@@ -146,92 +134,12 @@ int dram_init(void)
 		.wldqsen           = 25,
 	};
 
-	ddrmc_setup_iomux(NULL, 0);
-
 	ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2);
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
 
 	return 0;
 }
 
-static void setup_iomux_uart(void)
-{
-	static const iomux_v3_cfg_t uart_pads[] = {
-		NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTB10__UART0_TX, UART_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTB11__UART0_RX, UART_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
-static void setup_iomux_enet(void)
-{
-	static const iomux_v3_cfg_t enet0_pads[] = {
-		NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKOUT, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC10__RMII1_MDIO, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC9__RMII1_MDC, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC11__RMII1_CRS_DV, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC12__RMII1_RD1, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC13__RMII1_RD0, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC14__RMII1_RXER, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC15__RMII1_TD1, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC16__RMII1_TD0, ENET_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTC17__RMII1_TXEN, ENET_PAD_CTRL),
-	};
-
-	imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
-}
-
-static void setup_iomux_i2c(void)
-{
-	static const iomux_v3_cfg_t i2c0_pads[] = {
-		VF610_PAD_PTB14__I2C0_SCL,
-		VF610_PAD_PTB15__I2C0_SDA,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
-}
-
-#ifdef CONFIG_NAND_VF610_NFC
-static void setup_iomux_nfc(void)
-{
-	static const iomux_v3_cfg_t nfc_pads[] = {
-		VF610_PAD_PTD23__NF_IO7,
-		VF610_PAD_PTD22__NF_IO6,
-		VF610_PAD_PTD21__NF_IO5,
-		VF610_PAD_PTD20__NF_IO4,
-		VF610_PAD_PTD19__NF_IO3,
-		VF610_PAD_PTD18__NF_IO2,
-		VF610_PAD_PTD17__NF_IO1,
-		VF610_PAD_PTD16__NF_IO0,
-		VF610_PAD_PTB24__NF_WE_B,
-		VF610_PAD_PTB25__NF_CE0_B,
-		VF610_PAD_PTB27__NF_RE_B,
-		VF610_PAD_PTC26__NF_RB_B,
-		VF610_PAD_PTC27__NF_ALE,
-		VF610_PAD_PTC28__NF_CLE
-	};
-
-	imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
-}
-#endif
-
-#ifdef CONFIG_FSL_DSPI
-static void setup_iomux_dspi(void)
-{
-	static const iomux_v3_cfg_t dspi1_pads[] = {
-		VF610_PAD_PTD5__DSPI1_CS0,
-		VF610_PAD_PTD6__DSPI1_SIN,
-		VF610_PAD_PTD7__DSPI1_SOUT,
-		VF610_PAD_PTD8__DSPI1_SCK,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
-}
-#endif
-
 #ifdef CONFIG_VYBRID_GPIO
 static void setup_iomux_gpio(void)
 {
@@ -343,20 +251,8 @@ int board_mmc_getcd(struct mmc *mmc)
 
 int board_mmc_init(bd_t *bis)
 {
-	static const iomux_v3_cfg_t esdhc1_pads[] = {
-		NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
-		NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
-	};
-
 	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 
-	imx_iomux_v3_setup_multiple_pads(
-		esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
-
 	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
 }
 #endif
@@ -495,21 +391,10 @@ int board_early_init_f(void)
 	clock_init();
 	mscm_init();
 
-	setup_iomux_uart();
-	setup_iomux_enet();
-	setup_iomux_i2c();
-#ifdef CONFIG_NAND_VF610_NFC
-	setup_iomux_nfc();
-#endif
-
 #ifdef CONFIG_VYBRID_GPIO
 	setup_iomux_gpio();
 #endif
 
-#ifdef CONFIG_FSL_DSPI
-	setup_iomux_dspi();
-#endif
-
 #ifdef CONFIG_VIDEO_FSL_DCU_FB
 	setup_tcon();
 	setup_iomux_fsl_dcu();
@@ -593,8 +478,6 @@ int ft_board_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_USB_EHCI_VF
 int board_ehci_hcd_init(int port)
 {
-	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
-
 	switch (port) {
 	case 0:
 		/* USBC does not have PEN, also configured as USB client only */
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 706d7ca634..9a91cb4b82 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
+CONFIG_CMD_DM=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
@@ -63,6 +64,10 @@ CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_VYBRID=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 # CONFIG_SPL_SERIAL_PRESENT is not set
 # CONFIG_TPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (9 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
                   ` (11 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Migrate FEC, ESDHC, NFC and USB to driver model.

While at it also do no longer enable optional I2C clock in board file as
the generic clock code now handles this. Note for space reason and as
it is not required just for booting we do not enable I2C in U-Boot by
default.

While at it also update copyright period.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_vf/colibri_vf.c | 83 +--------------------------
 configs/colibri_vf_defconfig          |  5 ++
 include/configs/colibri_vf.h          | 13 +----
 3 files changed, 7 insertions(+), 94 deletions(-)

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index c9de3c0c76..421a4791a1 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -16,24 +16,16 @@
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <fdt_support.h>
-#include <fsl_esdhc.h>
 #include <fsl_dcu_fb.h>
 #include <g_dnl.h>
-#include <i2c.h>
 #include <jffs2/load_kernel.h>
-#include <miiphy.h>
-#include <mmc.h>
 #include <mtd_node.h>
-#include <netdev.h>
 #include <usb.h>
 
 #include "../common/tdx-common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define USB_PEN_GPIO           83
-#define USB_CDET_GPIO		102
-
 static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
 	/* AXI */
 	{ DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 },
@@ -238,25 +230,6 @@ static void setup_tcon(void)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
-	{ESDHC1_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	/* eSDHC1 is always present */
-	return 1;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
-	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-}
-#endif
-
 static inline int is_colibri_vf61(void)
 {
 	struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR;
@@ -289,7 +262,7 @@ static void clock_init(void)
 			CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
 			CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
-			CCM_CCGR4_GPC_CTRL_MASK | CCM_CCGR4_I2C0_CTRL_MASK);
+			CCM_CCGR4_GPC_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
 			CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
 	clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
@@ -378,14 +351,6 @@ static void mscm_init(void)
 		writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]);
 }
 
-int board_phy_config(struct phy_device *phydev)
-{
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-
 int board_early_init_f(void)
 {
 	clock_init();
@@ -432,13 +397,8 @@ int board_init(void)
 	 * so we must use the external oscillator in order
 	 * to maintain correct time in the hwclock
 	 */
-
 	setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN);
 
-#ifdef CONFIG_USB_EHCI_VF
-	gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
-#endif
-
 	return 0;
 }
 
@@ -474,44 +434,3 @@ int ft_board_setup(void *blob, bd_t *bd)
 	return ft_common_board_setup(blob, bd);
 }
 #endif
-
-#ifdef CONFIG_USB_EHCI_VF
-int board_ehci_hcd_init(int port)
-{
-	switch (port) {
-	case 0:
-		/* USBC does not have PEN, also configured as USB client only */
-		break;
-	case 1:
-		gpio_request(USB_PEN_GPIO, "usb-pen-gpio");
-		gpio_direction_output(USB_PEN_GPIO, 0);
-		break;
-	}
-	return 0;
-}
-
-int board_usb_phy_mode(int port)
-{
-	switch (port) {
-	case 0:
-		/*
-		 * Port 0 is used only in client mode on Colibri Vybrid modules
-		 * Check for state of USB client gpio pin and accordingly return
-		 * USB_INIT_DEVICE or USB_INIT_HOST.
-		 */
-		if (gpio_get_value(USB_CDET_GPIO))
-			return USB_INIT_DEVICE;
-		else
-			return USB_INIT_HOST;
-	case 1:
-		/* Port 1 is used only in host mode on Colibri Vybrid modules */
-		return USB_INIT_HOST;
-	default:
-		/*
-		 * There are only two USB controllers on Vybrid. Ideally we will
-		 * not reach here. However return USB_INIT_HOST if we do.
-		 */
-		return USB_INIT_HOST;
-	}
-}
-#endif
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 9a91cb4b82..344fe77234 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -56,13 +56,18 @@ CONFIG_DM=y
 CONFIG_DFU_NAND=y
 CONFIG_DM_GPIO=y
 CONFIG_VYBRID_GPIO=y
+CONFIG_DM_MMC=y
 # CONFIG_MMC_HW_PARTITIONING is not set
 CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
 CONFIG_NAND_VF610_NFC=y
+CONFIG_NAND_VF610_NFC_DT=y
 CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_VYBRID=y
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index e7b786e48b..1acc6e5056 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2015-2016 Toradex, Inc.
+ * Copyright 2015-2019 Toradex, Inc.
  *
  * Configuration settings for the Toradex VF50/VF61 modules.
  *
@@ -36,17 +36,6 @@
 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
-
-/* Dynamic MTD partition support */
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_ESDHC_NUM	1
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET1_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RMII
-#define CONFIG_FEC_MXC_PHYADDR          0
 
 #define CONFIG_IPADDR		192.168.10.2
 #define CONFIG_NETMASK		255.255.255.0
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (10 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-06 16:48   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 13/22] colibri_vf: add distroboot support Marcel Ziswiler
                   ` (10 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Use SZ_X{MK} macros from linux/sizes.h for include/configs/colibri_vf.h.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 1acc6e5056..9effa56539 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -12,6 +12,7 @@
 #define __CONFIG_H
 
 #include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
 
 #define CONFIG_SYS_FSL_CLK
 
@@ -28,7 +29,7 @@
 #endif
 
 /* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * SZ_1M)
 
 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -118,7 +119,7 @@
 
 /* Physical memory map */
 #define PHYS_SDRAM			(0x80000000)
-#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)
+#define PHYS_SDRAM_SIZE			(256 * SZ_1M)
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
@@ -141,6 +142,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 /* USB DFU */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
+#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
 
 #endif /* __CONFIG_H */
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 13/22] colibri_vf: add distroboot support
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (11 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 14/22] colibri_vf: set fdtfile for distroboot Marcel Ziswiler
                   ` (9 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

Add support for distro boot. This is especially helpful for external
devices. There is a global boot command which scans a predefined
list of boot targets:
  run distro_bootcmd

As well as direct boot commands such as:
  run bootcmd_mmc0
  run bootcmd_usb
  run bootcmd_dhcp
  ...

Refer to doc/README.distro fo details.

While at it also re-order boot command macros as well as the
CONFIG_EXTRA_ENV_SETTINGS.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 75 ++++++++++++++++++++++--------------
 1 file changed, 46 insertions(+), 29 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 9effa56539..83a33ff786 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -48,13 +48,15 @@
 /* We boot from the gfxRAM area of the OCRAM. */
 #define CONFIG_BOARD_SIZE_LIMIT		520192
 
-#define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
-	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
-	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
-	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"bootm_size=0x10000000\0" \
+	"fdt_addr_r=0x82000000\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"kernel_addr_r=0x81000000\0" \
+	"pxefile_addr_r=0x87100000\0" \
+	"ramdisk_addr_r=0x82100000\0" \
+	"scriptaddr=0x87000000\0"
 
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
@@ -65,7 +67,15 @@
 	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define UBI_BOOTCMD	\
+#define SD_BOOTCMD \
+	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
+	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
+	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
+	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
+	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
+	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+
+#define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 	"ubi.fm_autoconvert=1\0" \
 	"ubiboot=run setup; " \
@@ -76,36 +86,43 @@
 	"ubi read ${fdt_addr_r} dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
+#define CONFIG_BOOTCOMMAND "run ubiboot; run distro_bootcmd;"
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef BOOTENV_RUN_NET_USB_START
+#define BOOTENV_RUN_NET_USB_START ""
 
 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	"kernel_addr_r=0x82000000\0" \
-	"fdt_addr_r=0x84000000\0" \
-	"kernel_file=zImage\0" \
-	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
+	BOOTENV \
+	MEM_LAYOUT_ENV_SETTINGS \
+	NFS_BOOTCMD \
+	SD_BOOTCMD \
+	UBI_BOOTCMD \
+	"console=ttyLP0\0" \
+	"defargs=\0" \
+	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
+	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 	"fdt_fixup=;\0" \
-	"defargs=\0" \
-	"console=ttyLP0\0" \
-	"setup=setenv setupargs " \
-	"console=tty1 console=${console}" \
-	",${baudrate}n8 ${memargs}\0" \
+	"kernel_file=zImage\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"setsdupdate=mmc rescan && set interface mmc && " \
-	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
-	"source ${loadaddr}\0" \
-	"setusbupdate=usb start && set interface usb && " \
-	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
-	"source ${loadaddr}\0" \
+		"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
+		"source ${loadaddr}\0" \
+	"setup=setenv setupargs console=tty1 console=${console}" \
+		",${baudrate}n8 ${memargs}\0" \
 	"setupdate=run setsdupdate || run setusbupdate\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
-	"video-mode=dcufb:640x480-16 at 60,monitor=lcd\0" \
+	"setusbupdate=usb start && set interface usb && " \
+		"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
+		"source ${loadaddr}\0" \
 	"splashpos=m,m\0" \
-	SD_BOOTCMD \
-	NFS_BOOTCMD \
-	UBI_BOOTCMD
+	"video-mode=dcufb:640x480-16 at 60,monitor=lcd\0"
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 14/22] colibri_vf: set fdtfile for distroboot
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (12 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 13/22] colibri_vf: add distroboot support Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message Marcel Ziswiler
                   ` (8 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

Set fdtfile to represent the current board. This allows distribution
to load the correct device tree, which in the module case often
deviates from the common fallback ${soc}-${board}${boardver}.dtb...

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 83a33ff786..0bbeeb902e 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -86,7 +86,8 @@
 	"ubi read ${fdt_addr_r} dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
-#define CONFIG_BOOTCOMMAND "run ubiboot; run distro_bootcmd;"
+#define CONFIG_BOOTCOMMAND "run ubiboot; " \
+	"setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
@@ -108,7 +109,6 @@
 	"defargs=\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
-	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 	"fdt_fixup=;\0" \
 	"kernel_file=zImage\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (13 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 14/22] colibri_vf: set fdtfile for distroboot Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-06 16:53   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
                   ` (7 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>

Use similar info message as on other modules.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_vf/colibri_vf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 421a4791a1..d28a73332a 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -405,9 +405,9 @@ int board_init(void)
 int checkboard(void)
 {
 	if (is_colibri_vf61())
-		puts("Board: Colibri VF61\n");
+		puts("Model: Toradex Colibri VF61\n");
 	else
-		puts("Board: Colibri VF50\n");
+		puts("Model: Toradex Colibri VF50\n");
 
 	return 0;
 }
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (14 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-11 13:46   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
                   ` (6 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

Let the kernel print some debug messages when a user program
crashes due to an exception.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 0bbeeb902e..030281bb67 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -106,7 +106,7 @@
 	SD_BOOTCMD \
 	UBI_BOOTCMD \
 	"console=ttyLP0\0" \
-	"defargs=\0" \
+	"defargs=user_debug=31\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (15 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-11 13:51   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
                   ` (5 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

It turns out that OpenSSL calls undefined instructions to detect
ARM capabilities at runtime (via SIGILL handler). This leads to
stack traces e.g. when logging in using SSH:
  [  877.464442] sshd (613): undefined instruction: pc=76ee2da8
  ...

Disable undefined instruction events since it is used as an
autodetecion mechanism.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 030281bb67..b2f27c1977 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -106,7 +106,7 @@
 	SD_BOOTCMD \
 	UBI_BOOTCMD \
 	"console=ttyLP0\0" \
-	"defargs=user_debug=31\0" \
+	"defargs=user_debug=30\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (16 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-11 14:01   ` Igor Opaniuk
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 19/22] arm: vf610: add uart2 clock/pinmux support Marcel Ziswiler
                   ` (4 subsequent siblings)
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

Use device tree to set MTD partitions of the NAND chip.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 configs/colibri_vf_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 344fe77234..8f6cceca7f 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -91,4 +91,5 @@ CONFIG_VIDEO_FSL_DCU_FB=y
 CONFIG_VIDEO=y
 CONFIG_SYS_CONSOLE_FG_COL=0x00
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_FDT_FIXUP_PARTITIONS=y
 # CONFIG_EFI_UNICODE_CAPITALIZATION is not set
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 19/22] arm: vf610: add uart2 clock/pinmux support
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (17 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 20/22] colibri_vf: adjust timing according to data sheet Marcel Ziswiler
                   ` (3 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

Add support for Vybrid's UART2 (Colibri UART_B).

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 arch/arm/include/asm/arch-vf610/crm_regs.h    | 1 +
 arch/arm/include/asm/arch-vf610/iomux-vf610.h | 6 +++++-
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index 9fce49ddc6..0c9ed52933 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -200,6 +200,7 @@ struct anadig_reg {
 #define CCM_REG_CTRL_MASK			0xffffffff
 #define CCM_CCGR0_UART0_CTRL_MASK               (0x3 << 14)
 #define CCM_CCGR0_UART1_CTRL_MASK		(0x3 << 16)
+#define CCM_CCGR0_UART2_CTRL_MASK		(0x3 << 18)
 #define CCM_CCGR0_DSPI0_CTRL_MASK		(0x3 << 24)
 #define CCM_CCGR0_DSPI1_CTRL_MASK		(0x3 << 26)
 #define CCM_CCGR1_USBC0_CTRL_MASK       (0x3 << 8)
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index 01bc2998b8..8ba03e5a17 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -132,10 +132,14 @@ enum {
 	VF610_PAD_PTD24__GPIO_70		= IOMUX_PAD(0x0118, 0x0118, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
 	VF610_PAD_PTD23__NF_IO7			= IOMUX_PAD(0x011c, 0x011c, 2, __NA_, 0, VF610_NFC_IO_PAD_CTRL),
 	VF610_PAD_PTD0__QSPI0_A_QSCK		= IOMUX_PAD(0x013c, 0x013c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD0__UART2_TX		= IOMUX_PAD(0x013c, 0x013c, 2, 0x38c, 2, VF610_UART_PAD_CTRL),
 	VF610_PAD_PTD1__QSPI0_A_CS0		= IOMUX_PAD(0x0140, 0x0140, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD1__UART2_RX		= IOMUX_PAD(0x0140, 0x0140, 2, 0x388, 2, VF610_UART_PAD_CTRL),
 	VF610_PAD_PTD2__QSPI0_A_DATA3		= IOMUX_PAD(0x0144, 0x0144, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
+	VF610_PAD_PTD2__GPIO_81			= IOMUX_PAD(0x0144, 0x0144, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
 	VF610_PAD_PTD3__QSPI0_A_DATA2		= IOMUX_PAD(0x0148, 0x0148, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
-	VF610_PAD_PTD4__GPIO_83         = IOMUX_PAD(0x014C, 0x014C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD3__GPIO_82			= IOMUX_PAD(0x0148, 0x0148, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
+	VF610_PAD_PTD4__GPIO_83			= IOMUX_PAD(0x014C, 0x014C, 0, __NA_, 0, VF610_GPIO_PAD_CTRL),
 	VF610_PAD_PTD4__QSPI0_A_DATA1		= IOMUX_PAD(0x014c, 0x014c, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
 	VF610_PAD_PTD5__QSPI0_A_DATA0		= IOMUX_PAD(0x0150, 0x0150, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
 	VF610_PAD_PTD7__QSPI0_B_QSCK		= IOMUX_PAD(0x0158, 0x0158, 1, __NA_, 0, VF610_QSPI_PAD_CTRL),
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 20/22] colibri_vf: adjust timing according to data sheet
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (18 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 19/22] arm: vf610: add uart2 clock/pinmux support Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 21/22] colibri_vf: use leveling evaluated by DDR validation tools Marcel Ziswiler
                   ` (2 subsequent siblings)
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

Using the DDR Validation tool in Processor Expert uncovered two
timing inconsistencies. Since those timings are related to the
suspend mode they do not affect or change regular memory behaviour.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_vf/colibri_vf.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index d28a73332a..8c4909af54 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -99,15 +99,21 @@ int dram_init(void)
 		.tras_lockout      = 0,
 		.tdal              = 12,
 		.bstlen            = 3,
-		.tdll              = 512,
+		.tdll              = 512, /* not applicable since freq. scaling
+					   * is not used
+					   */
 		.trp_ab            = 6,
 		.tref              = 3120,
 		.trfc              = 64,
 		.tref_int          = 0,
 		.tpdex             = 3,
 		.txpdll            = 10,
-		.txsnr             = 48,
-		.txsr              = 468,
+		.txsnr             = 68,  /* changed to conform to JEDEC
+					   * specifications
+					   */
+		.txsr              = 506, /* changed to conform to JEDEC
+					   * specifications
+					   */
 		.cksrx             = 5,
 		.cksre             = 5,
 		.freq_chg_en       = 0,
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 21/22] colibri_vf: use leveling evaluated by DDR validation tools
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (19 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 20/22] colibri_vf: adjust timing according to data sheet Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
  2019-02-17 22:40 ` [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Lukasz Majewski
  22 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Stefan Agner <stefan.agner@toradex.com>

The DDR validation tool (which is part of Processor Expert) allows
to evaluate leveling parameters for CR105/CR106/CR110. Several
runs have been made with Colibri VF50 and VF61 and it seems to
evaluate very similar values. Use this values by default.

Note: The newly evaluated parameters seem to require CTLUPD_AREF
to be enabled!

Note 2: The tool also evaluated 6 as a new value for PHY02/18
GATE_CFG (Coarse adjust of gate open time). However, this seems
not to work in practise.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 board/toradex/colibri_vf/colibri_vf.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 8c4909af54..87debf1360 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -27,6 +27,13 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
+	{ DDRMC_CR79_CTLUPD_AREF(1), 79 },
+	/* sets manual values for read lvl. (gate) delay of data slice 0/1 */
+	{ DDRMC_CR105_RDLVL_DL_0(28), 105 },
+	{ DDRMC_CR106_RDLVL_GTDL_0(24), 106 },
+	{ DDRMC_CR110_RDLVL_DL_1(28) | DDRMC_CR110_RDLVL_GTDL_1(24), 110 },
+	{ DDRMC_CR102_RDLVL_GT_REGEN | DDRMC_CR102_RDLVL_REG_EN, 102 },
+
 	/* AXI */
 	{ DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 },
 	{ DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 },
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (20 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 21/22] colibri_vf: use leveling evaluated by DDR validation tools Marcel Ziswiler
@ 2019-02-15 22:20 ` Marcel Ziswiler
  2019-03-06 15:30   ` Igor Opaniuk
  2019-02-17 22:40 ` [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Lukasz Majewski
  22 siblings, 1 reply; 38+ messages in thread
From: Marcel Ziswiler @ 2019-02-15 22:20 UTC (permalink / raw)
  To: u-boot

From: Gerard Salvatella <gerard.salvatella@toradex.com>

Currently, Vybrid's sdboot variable tries to load the kernel from /boot
of the root partition (typically second partition when using the sdcard
image). However, since we moved to flash the kernel in a separate UBI
volume, we no longer deploy the kernel/device tree to /boot, hence
sdboot does not work in its current state.

Load the kernel and device tree from the first (typically FAT) partition
as customary on all Toradex modules.

While at it also change from rw to ro as e.g. systemd will re-mount the
root file system rw anyway after checking it.

Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
Acked-by: Stefan Agner <stefan.agner@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

 include/configs/colibri_vf.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index b2f27c1977..0d57e303a1 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -68,11 +68,11 @@
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
+	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0"	\
 	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
-	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
+	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define UBI_BOOTCMD \
-- 
2.20.1

^ permalink raw reply related	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
@ 2019-02-17 22:38   ` Lukasz Majewski
  0 siblings, 0 replies; 38+ messages in thread
From: Lukasz Majewski @ 2019-02-17 22:38 UTC (permalink / raw)
  To: u-boot

On Fri, 15 Feb 2019 23:20:23 +0100
Marcel Ziswiler <marcel@ziswiler.com> wrote:

> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> While commit 3e020f03e94f ("driver: misc: add MXC_OCOTP Kconfig
> entry") introduced a Kconfig entry it did not actually migrate all
> configurations to using it.
> 
> As CONFIG_MXC_OCOTP was in mx{6/7}_common.h enable it by default on
> those architectures. Additionally, also enable it on ARCH_IMX8M and
> ARCH_VF610 where all current members enabled it through their legacy
> configuration header files.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> ---
> 
>  configs/bk4r1_defconfig              | 1 -
>  configs/pcm052_defconfig             | 1 -
>  drivers/misc/Kconfig                 | 2 ++
>  include/configs/advantech_dms-ba16.h | 2 --
>  include/configs/apalis_imx6.h        | 5 -----
>  include/configs/colibri_imx6.h       | 5 -----
>  include/configs/colibri_vf.h         | 4 ----
>  include/configs/dh_imx6.h            | 5 -----
>  include/configs/ge_bx50v3.h          | 2 --
>  include/configs/imx8mq_evk.h         | 1 -
>  include/configs/kp_imx6q_tpc.h       | 5 -----
>  include/configs/mx6_common.h         | 3 ---
>  include/configs/mx7_common.h         | 3 ---
>  include/configs/vf610twr.h           | 4 ----
>  14 files changed, 2 insertions(+), 41 deletions(-)
> 
> diff --git a/configs/bk4r1_defconfig b/configs/bk4r1_defconfig
> index e3852f4856..439207fd39 100644
> --- a/configs/bk4r1_defconfig
> +++ b/configs/bk4r1_defconfig
> @@ -49,7 +49,6 @@ CONFIG_SYS_I2C_MXC_I2C4=y
>  CONFIG_LED=y
>  CONFIG_LED_GPIO=y
>  CONFIG_MISC=y
> -CONFIG_MXC_OCOTP=y
>  CONFIG_I2C_EEPROM=y
>  CONFIG_SYS_I2C_EEPROM_ADDR=0x50
>  CONFIG_SYS_I2C_EEPROM_BUS=2
> diff --git a/configs/pcm052_defconfig b/configs/pcm052_defconfig
> index 906abbfd69..fd093b35c2 100644
> --- a/configs/pcm052_defconfig
> +++ b/configs/pcm052_defconfig
> @@ -36,7 +36,6 @@ CONFIG_SYS_I2C_MXC_I2C2=y
>  CONFIG_SYS_I2C_MXC_I2C3=y
>  CONFIG_SYS_I2C_MXC_I2C4=y
>  CONFIG_MISC=y
> -CONFIG_MXC_OCOTP=y
>  CONFIG_I2C_EEPROM=y
>  CONFIG_SYS_I2C_EEPROM_ADDR=0x50
>  CONFIG_SYS_I2C_EEPROM_BUS=2
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 704c8dd195..137baa71f0 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -128,6 +128,8 @@ config JZ4780_EFUSE
>  
>  config MXC_OCOTP
>  	bool "Enable MXC OCOTP Driver"
> +	depends on ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_VF610
> +	default y
>  	help
>  	  If you say Y here, you will get support for the One Time
>  	  Programmable memory pages that are stored on the some
> diff --git a/include/configs/advantech_dms-ba16.h
> b/include/configs/advantech_dms-ba16.h index 0c9de6125d..a22c6a7d45
> 100644 --- a/include/configs/advantech_dms-ba16.h
> +++ b/include/configs/advantech_dms-ba16.h
> @@ -34,8 +34,6 @@
>  
>  #define CONFIG_MXC_UART
>  
> -#define CONFIG_MXC_OCOTP
> -
>  /* SATA Configs */
>  #define CONFIG_SYS_SATA_MAX_DEVICE	1
>  #define CONFIG_DWC_AHSATA_PORT_ID	0
> diff --git a/include/configs/apalis_imx6.h
> b/include/configs/apalis_imx6.h index c8aa1bdddf..95dd6f9362 100644
> --- a/include/configs/apalis_imx6.h
> +++ b/include/configs/apalis_imx6.h
> @@ -41,11 +41,6 @@
>  #define CONFIG_SYS_I2C_SPEED		100000
>  #define CONFIG_SYS_MXC_I2C3_SPEED	400000
>  
> -/* OCOTP Configs */
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>  /* MMC Configs */
>  #define CONFIG_FSL_USDHC
>  #define CONFIG_SYS_FSL_ESDHC_ADDR	0
> diff --git a/include/configs/colibri_imx6.h
> b/include/configs/colibri_imx6.h index a6a823ee1f..d2f8a58e80 100644
> --- a/include/configs/colibri_imx6.h
> +++ b/include/configs/colibri_imx6.h
> @@ -39,11 +39,6 @@
>  #define CONFIG_SYS_I2C_SPEED		100000
>  #define CONFIG_SYS_MXC_I2C3_SPEED	400000
>  
> -/* OCOTP Configs */
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>  /* MMC Configs */
>  #define CONFIG_FSL_USDHC
>  #define CONFIG_SYS_FSL_ESDHC_ADDR	0
> diff --git a/include/configs/colibri_vf.h
> b/include/configs/colibri_vf.h index 7b974d9e97..e7b786e48b 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -17,10 +17,6 @@
>  
>  #define CONFIG_SKIP_LOWLEVEL_INIT
>  
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>  #ifdef CONFIG_VIDEO_FSL_DCU_FB
>  #define CONFIG_SPLASH_SCREEN_ALIGN
>  #define CONFIG_VIDEO_LOGO
> diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
> index 9231bd853f..4dc795c3f4 100644
> --- a/include/configs/dh_imx6.h
> +++ b/include/configs/dh_imx6.h
> @@ -48,11 +48,6 @@
>  #define CONFIG_FEC_MXC_PHYADDR		0
>  #define CONFIG_ARP_TIMEOUT		200UL
>  
> -/* Fuses */
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>  /* I2C Configs */
>  #define CONFIG_SYS_I2C
>  #define CONFIG_SYS_I2C_MXC
> diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
> index e0e1f713ef..8bbda2788d 100644
> --- a/include/configs/ge_bx50v3.h
> +++ b/include/configs/ge_bx50v3.h
> @@ -35,8 +35,6 @@
>  
>  #define CONFIG_MXC_UART
>  
> -#define CONFIG_MXC_OCOTP
> -
>  /* SATA Configs */
>  #ifdef CONFIG_CMD_SATA
>  #define CONFIG_SYS_SATA_MAX_DEVICE	1
> diff --git a/include/configs/imx8mq_evk.h
> b/include/configs/imx8mq_evk.h index f0430224cb..044a254320 100644
> --- a/include/configs/imx8mq_evk.h
> +++ b/include/configs/imx8mq_evk.h
> @@ -231,7 +231,6 @@
>  
>  #define CONFIG_MXC_GPIO
>  
> -#define CONFIG_MXC_OCOTP
>  #define CONFIG_CMD_FUSE
>  
>  /* I2C Configs */
> diff --git a/include/configs/kp_imx6q_tpc.h
> b/include/configs/kp_imx6q_tpc.h index b6b27ee1d5..d2ebf92953 100644
> --- a/include/configs/kp_imx6q_tpc.h
> +++ b/include/configs/kp_imx6q_tpc.h
> @@ -31,11 +31,6 @@
>  #define CONFIG_FEC_MXC_PHYADDR		0
>  #define CONFIG_ARP_TIMEOUT		200UL
>  
> -/* Fuses */
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>  /* I2C Configs */
>  #define CONFIG_SYS_I2C
>  #define CONFIG_SYS_I2C_MXC
> diff --git a/include/configs/mx6_common.h
> b/include/configs/mx6_common.h index cdc8833778..6b20c6db58 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -57,9 +57,6 @@
>  /* MMC */
>  #define CONFIG_FSL_USDHC
>  
> -/* Fuses */
> -#define CONFIG_MXC_OCOTP
> -
>  /* Secure boot (HAB) support */
>  #ifdef CONFIG_SECURE_BOOT
>  #define CONFIG_CSF_SIZE			0x2000
> diff --git a/include/configs/mx7_common.h
> b/include/configs/mx7_common.h index a895c936aa..cc7e87269e 100644
> --- a/include/configs/mx7_common.h
> +++ b/include/configs/mx7_common.h
> @@ -42,9 +42,6 @@
>  /* MMC */
>  #define CONFIG_FSL_USDHC
>  
> -/* Fuses */
> -#define CONFIG_MXC_OCOTP
> -
>  #define CONFIG_ARMV7_SECURE_BASE	0x00900000
>  
>  #define CONFIG_ARMV7_PSCI_1_0
> diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
> index 686a383739..ba85bc91e7 100644
> --- a/include/configs/vf610twr.h
> +++ b/include/configs/vf610twr.h
> @@ -19,10 +19,6 @@
>  /* Enable passing of ATAGs */
>  #define CONFIG_CMDLINE_TAG
>  
> -#ifdef CONFIG_CMD_FUSE
> -#define CONFIG_MXC_OCOTP
> -#endif
> -
>  /* Size of malloc() pool */
>  #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 *
> 1024 * 1024) 

Reviewed-by: Lukasz Majewski <lukma@denx.de>


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190217/0fc66a60/attachment.sig>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion
  2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
                   ` (21 preceding siblings ...)
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
@ 2019-02-17 22:40 ` Lukasz Majewski
  22 siblings, 0 replies; 38+ messages in thread
From: Lukasz Majewski @ 2019-02-17 22:40 UTC (permalink / raw)
  To: u-boot

Hi Marcel, Stefan,

> This series addresses some shortcomings, enables/introduces device
> tree support and converts all except video to using the driver model.
> This is fully tested both running our latest downstream BSP as well
> as the mainline Linux kernel.
> 
> This series is based on Lukasz' previous work on Vybrid [1] and is
> available together with his and my previous series addressing Apalis
> and Colibri iMX6 on our git server [2].
> 
> [1] https://patchwork.ozlabs.org/cover/1041597/
> [2] http://git.toradex.com/cgit/u-boot-toradex.git/log/?h=for-next
> 
> 

Thanks for your work on further vf610 rework.

> Bhuvanchandra DV (1):
>   colibri_vf: sync the board info message
> 
> Gerard Salvatella (1):
>   colibri_vf: fix sdboot for vybrid modules
> 
> Marcel Ziswiler (12):
>   add missing space in comment
>   vf610: ddrmc: add missing include
>   imx: bootaux: add dependency on vf610
>   configs: move CONFIG_USB_EHCI_VF to Kconfig
>   configs: colibri_vf: remove obsolete mmc/sd card environment
>   configs: colibri_vf: limit size of malloc() pool before relocation
>   configs: move CONFIG_MXC_OCOTP to Kconfig
>   ARM: dts: colibri_vf: update device trees
>   configs: colibri_vf: disable obscure options
>   colibri_vf: migrate pinctrl and regulators to dtb/dm
>   colibri_vf: migrate fec, esdhc, nfc and usb to driver model
>   config: colibri_vf: use macros from linux/sizes.h
> 
> Stefan Agner (8):
>   colibri_vf: add distroboot support
>   colibri_vf: set fdtfile for distroboot
>   colibri_vf: enable user debug by default
>   colibri_vf: disable undefined instruction events in user debug
>   config: colibri_vf: enable mtd partitions via dt
>   arm: vf610: add uart2 clock/pinmux support
>   colibri_vf: adjust timing according to data sheet
>   colibri_vf: use leveling evaluated by DDR validation tools
> 
>  arch/arm/dts/vf-colibri-u-boot.dtsi           |  23 ++
>  arch/arm/dts/vf-colibri.dtsi                  | 198 +++++++++++++-
>  arch/arm/dts/vf500-colibri.dts                |   1 +
>  arch/arm/dts/vf610-colibri.dts                |   1 +
>  arch/arm/include/asm/arch-vf610/crm_regs.h    |   1 +
>  arch/arm/include/asm/arch-vf610/ddrmc-vf610.h |   2 +
>  arch/arm/include/asm/arch-vf610/iomux-vf610.h |   6 +-
>  arch/arm/mach-imx/Kconfig                     |   2 +-
>  board/freescale/imx8qxp_mek/imx8qxp_mek.c     |   2 +-
>  board/toradex/colibri_vf/MAINTAINERS          |   4 +-
>  board/toradex/colibri_vf/colibri_vf.c         | 241
> ++---------------- configs/bk4r1_defconfig                       |
> 1 - configs/colibri_vf_defconfig                  |  22 +-
>  configs/pcm052_defconfig                      |   1 -
>  drivers/misc/Kconfig                          |   2 +
>  drivers/usb/host/Kconfig                      |   7 +
>  drivers/video/videomodes.c                    |   2 +-
>  include/configs/advantech_dms-ba16.h          |   2 -
>  include/configs/apalis_imx6.h                 |   5 -
>  include/configs/colibri_imx6.h                |   5 -
>  include/configs/colibri_vf.h                  | 109 ++++----
>  include/configs/dh_imx6.h                     |   5 -
>  include/configs/ge_bx50v3.h                   |   2 -
>  include/configs/imx8mq_evk.h                  |   1 -
>  include/configs/kp_imx6q_tpc.h                |   5 -
>  include/configs/mx6_common.h                  |   3 -
>  include/configs/mx7_common.h                  |   3 -
>  include/configs/vf610twr.h                    |   4 -
>  scripts/config_whitelist.txt                  |   1 -
>  29 files changed, 344 insertions(+), 317 deletions(-)
>  create mode 100644 arch/arm/dts/vf-colibri-u-boot.dtsi
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190217/1b5f58d0/attachment.sig>

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
@ 2019-03-06 15:30   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-06 15:30 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:33, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Gerard Salvatella <gerard.salvatella@toradex.com>
>
> Currently, Vybrid's sdboot variable tries to load the kernel from /boot
> of the root partition (typically second partition when using the sdcard
> image). However, since we moved to flash the kernel in a separate UBI
> volume, we no longer deploy the kernel/device tree to /boot, hence
> sdboot does not work in its current state.
>
> Load the kernel and device tree from the first (typically FAT) partition
> as customary on all Toradex modules.
>
> While at it also change from rw to ro as e.g. systemd will re-mount the
> root file system rw anyway after checking it.
>
> Signed-off-by: Gerard Salvatella <gerard.salvatella@toradex.com>
> Acked-by: Stefan Agner <stefan.agner@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  include/configs/colibri_vf.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index b2f27c1977..0d57e303a1 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -68,11 +68,11 @@
>         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
>
>  #define SD_BOOTCMD \
> -       "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
> +       "sdargs=root=/dev/mmcblk0p2 ro rootwait\0"      \
>         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
>         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
> -       "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
> -       "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
> +       "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
> +       "load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
>         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
>
>  #define UBI_BOOTCMD \
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
@ 2019-03-06 16:48   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-06 16:48 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:25, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Use SZ_X{MK} macros from linux/sizes.h for include/configs/colibri_vf.h.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  include/configs/colibri_vf.h | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 1acc6e5056..9effa56539 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -12,6 +12,7 @@
>  #define __CONFIG_H
>
>  #include <asm/arch/imx-regs.h>
> +#include <linux/sizes.h>
>
>  #define CONFIG_SYS_FSL_CLK
>
> @@ -28,7 +29,7 @@
>  #endif
>
>  /* Size of malloc() pool */
> -#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
> +#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * SZ_1M)
>
>  /* Allow to overwrite serial and ethaddr */
>  #define CONFIG_ENV_OVERWRITE
> @@ -118,7 +119,7 @@
>
>  /* Physical memory map */
>  #define PHYS_SDRAM                     (0x80000000)
> -#define PHYS_SDRAM_SIZE                        (256 * 1024 * 1024)
> +#define PHYS_SDRAM_SIZE                        (256 * SZ_1M)
>
>  #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
>  #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
> @@ -141,6 +142,6 @@
>  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
>
>  /* USB DFU */
> -#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
> +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M)
>
>  #endif /* __CONFIG_H */
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message Marcel Ziswiler
@ 2019-03-06 16:53   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-06 16:53 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:26, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
>
> Use similar info message as on other modules.
>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  board/toradex/colibri_vf/colibri_vf.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
> index 421a4791a1..d28a73332a 100644
> --- a/board/toradex/colibri_vf/colibri_vf.c
> +++ b/board/toradex/colibri_vf/colibri_vf.c
> @@ -405,9 +405,9 @@ int board_init(void)
>  int checkboard(void)
>  {
>         if (is_colibri_vf61())
> -               puts("Board: Colibri VF61\n");
> +               puts("Model: Toradex Colibri VF61\n");
>         else
> -               puts("Board: Colibri VF50\n");
> +               puts("Model: Toradex Colibri VF50\n");
>
>         return 0;
>  }
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 01/22] add missing space in comment
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 01/22] add missing space in comment Marcel Ziswiler
@ 2019-03-07  5:29   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-07  5:29 UTC (permalink / raw)
  To: u-boot

minor: s/Spottet/Spotted/g in the commit message (but I'd rather use
"Add" here).

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:21, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Spottet two missing spaces in comments.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  board/freescale/imx8qxp_mek/imx8qxp_mek.c | 2 +-
>  drivers/video/videomodes.c                | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/board/freescale/imx8qxp_mek/imx8qxp_mek.c b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> index a4c587a390..63cd605b6a 100644
> --- a/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> +++ b/board/freescale/imx8qxp_mek/imx8qxp_mek.c
> @@ -112,7 +112,7 @@ void build_info(void)
>         sc_misc_build_info(-1, &sc_build, &sc_commit);
>         if (!sc_build) {
>                 printf("SCFW does not support build info\n");
> -               sc_commit = 0; /* Display 0 when the build info is not supported*/
> +               sc_commit = 0; /* Display 0 when the build info is not supported */
>         }
>         printf("Build: SCFW %x\n", sc_commit);
>  }
> diff --git a/drivers/video/videomodes.c b/drivers/video/videomodes.c
> index 1cfeaa980f..d7614329ff 100644
> --- a/drivers/video/videomodes.c
> +++ b/drivers/video/videomodes.c
> @@ -397,7 +397,7 @@ int video_edid_dtd_to_ctfb_res_modes(struct edid_detailed_timing *t,
>             EDID_DETAILED_TIMING_VERTICAL_BLANKING(*t) == 0 ||
>             EDID_DETAILED_TIMING_HSYNC_OFFSET(*t) == 0 ||
>             EDID_DETAILED_TIMING_VSYNC_OFFSET(*t) == 0 ||
> -           /* 3d formats are not supported*/
> +           /* 3d formats are not supported */
>             EDID_DETAILED_TIMING_FLAG_STEREO(*t) != 0)
>                 return -EINVAL;
>
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
@ 2019-03-07  5:31   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-07  5:31 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:25, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Allow using bootaux also on VF610 aka Vybrid.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  arch/arm/mach-imx/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index a1566cc2ad..313a886c6b 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -23,7 +23,7 @@ config IMX_RDC
>
>  config IMX_BOOTAUX
>         bool "Support boot auxiliary core"
> -       depends on ARCH_MX7 || ARCH_MX6
> +       depends on ARCH_MX7 || ARCH_MX6 || ARCH_VF610
>         help
>           bootaux [addr] to boot auxiliary core.
>
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
@ 2019-03-07  5:37   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-07  5:37 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:22, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Limit the size of the malloc() pool before relocation
> (SYS_MALLOC_F_LEN).
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  configs/colibri_vf_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
> index 4192501257..8188582ed9 100644
> --- a/configs/colibri_vf_defconfig
> +++ b/configs/colibri_vf_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
>  CONFIG_SYS_THUMB_BUILD=y
>  CONFIG_ARCH_VF610=y
>  CONFIG_SYS_TEXT_BASE=0x3f401000
> +CONFIG_SYS_MALLOC_F_LEN=0x800
>  CONFIG_TARGET_COLIBRI_VF=y
>  CONFIG_ENV_VARS_UBOOT_CONFIG=y
>  CONFIG_NR_DRAM_BANKS=1
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
@ 2019-03-07  5:39   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-07  5:39 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:26, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one
> and only user thereof being colibri_vf.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  drivers/usb/host/Kconfig     | 7 +++++++
>  include/configs/colibri_vf.h | 1 -
>  scripts/config_whitelist.txt | 1 -
>  3 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 60f37f40fd..6cda1cbfbd 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -154,6 +154,13 @@ config USB_EHCI_OMAP
>           Enables support for the on-chip EHCI controller on OMAP3 and later
>           SoCs.
>
> +config USB_EHCI_VF
> +       bool "Support for Vybrid on-chip EHCI USB controller"
> +       depends on ARCH_VF610
> +       default y
> +       help
> +         Enables support for the on-chip EHCI controller on Vybrid SoCs.
> +
>  if USB_EHCI_MX7
>
>  config MXC_USB_OTG_HACTIVE
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 31ff8a00a6..2fe7f217fa 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -159,7 +159,6 @@
>  #endif
>
>  /* USB Host Support */
> -#define CONFIG_USB_EHCI_VF
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
>  #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
>
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index 2b3572568b..9ca974bbae 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -4533,7 +4533,6 @@ CONFIG_USB_EHCI_SPEAR
>  CONFIG_USB_EHCI_TEGRA
>  CONFIG_USB_EHCI_TXFIFO_THRESH
>  CONFIG_USB_EHCI_VCT
> -CONFIG_USB_EHCI_VF
>  CONFIG_USB_ETH_QMULT
>  CONFIG_USB_ETH_SUBSET
>  CONFIG_USB_EXT2_BOOT
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
@ 2019-03-11 13:27   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-11 13:27 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:22, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> The DDR memory controller include file for the Vybrid uses
> iomux_v3_cfg_t without actually including iomux-vf610.h.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  arch/arm/include/asm/arch-vf610/ddrmc-vf610.h | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h b/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
> index c7da2b8a5e..03e3cecb95 100644
> --- a/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
> +++ b/arch/arm/include/asm/arch-vf610/ddrmc-vf610.h
> @@ -10,6 +10,8 @@
>  #ifndef __ASM_ARCH_VF610_DDRMC_H
>  #define __ASM_ARCH_VF610_DDRMC_H
>
> +#include <asm/arch/iomux-vf610.h>
> +
>  struct ddr3_jedec_timings {
>         u8 tinit;
>         u32 trst_pwron;
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
@ 2019-03-11 13:43   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-11 13:43 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:22, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Remove obsolete MMC/SD card environment configuration dating back to
> un-fused samples times.
>
> While at it also remove meanwhile spurious "USB Storage" comment.
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  include/configs/colibri_vf.h | 9 ---------
>  1 file changed, 9 deletions(-)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 2fe7f217fa..7b974d9e97 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -145,13 +145,6 @@
>         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
>
>  /* Environment organization */
> -
> -#ifdef CONFIG_ENV_IS_IN_MMC
> -#define CONFIG_SYS_MMC_ENV_DEV         0
> -#define CONFIG_ENV_OFFSET              (12 * 64 * 1024)
> -#define CONFIG_ENV_SIZE                        (8 * 1024)
> -#endif
> -
>  #ifdef CONFIG_ENV_IS_IN_NAND
>  #define CONFIG_ENV_SIZE                        (64 * 2048)
>  #define CONFIG_ENV_RANGE               (4 * 64 * 2048)
> @@ -165,6 +158,4 @@
>  /* USB DFU */
>  #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
>
> -/* USB Storage */
> -
>  #endif /* __CONFIG_H */
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
@ 2019-03-11 13:46   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-11 13:46 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:26, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Stefan Agner <stefan.agner@toradex.com>
>
> Let the kernel print some debug messages when a user program
> crashes due to an exception.
>
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  include/configs/colibri_vf.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 0bbeeb902e..030281bb67 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -106,7 +106,7 @@
>         SD_BOOTCMD \
>         UBI_BOOTCMD \
>         "console=ttyLP0\0" \
> -       "defargs=\0" \
> +       "defargs=user_debug=31\0" \
>         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
>         "fdt_board=eval-v3\0" \
>         "fdt_fixup=;\0" \
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
@ 2019-03-11 13:51   ` Igor Opaniuk
  0 siblings, 0 replies; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-11 13:51 UTC (permalink / raw)
  To: u-boot

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:25, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Stefan Agner <stefan.agner@toradex.com>
>
> It turns out that OpenSSL calls undefined instructions to detect
> ARM capabilities at runtime (via SIGILL handler). This leads to
> stack traces e.g. when logging in using SSH:
>   [  877.464442] sshd (613): undefined instruction: pc=76ee2da8
>   ...
>
> Disable undefined instruction events since it is used as an
> autodetecion mechanism.
>
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  include/configs/colibri_vf.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
> index 030281bb67..b2f27c1977 100644
> --- a/include/configs/colibri_vf.h
> +++ b/include/configs/colibri_vf.h
> @@ -106,7 +106,7 @@
>         SD_BOOTCMD \
>         UBI_BOOTCMD \
>         "console=ttyLP0\0" \
> -       "defargs=user_debug=31\0" \
> +       "defargs=user_debug=30\0" \
>         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
>         "fdt_board=eval-v3\0" \
>         "fdt_fixup=;\0" \
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt
  2019-02-15 22:20 ` [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
@ 2019-03-11 14:01   ` Igor Opaniuk
  2019-03-24 21:33     ` Marcel Ziswiler
  0 siblings, 1 reply; 38+ messages in thread
From: Igor Opaniuk @ 2019-03-11 14:01 UTC (permalink / raw)
  To: u-boot

Off-topic: I'm just wondering, why no one introduced a proper Kconfig symbol for
FDT_FIXUP_PARTITIONS. Currently there is no any description of this
option through
the code and what it's actually used for. But, anyway, it doesn't
directly relate to this particular patch-set,
it can be addressed in a separate patch.

Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>

On Sat, 16 Feb 2019 at 00:27, Marcel Ziswiler <marcel@ziswiler.com> wrote:
>
> From: Stefan Agner <stefan.agner@toradex.com>
>
> Use device tree to set MTD partitions of the NAND chip.
>
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
>  configs/colibri_vf_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
> index 344fe77234..8f6cceca7f 100644
> --- a/configs/colibri_vf_defconfig
> +++ b/configs/colibri_vf_defconfig
> @@ -91,4 +91,5 @@ CONFIG_VIDEO_FSL_DCU_FB=y
>  CONFIG_VIDEO=y
>  CONFIG_SYS_CONSOLE_FG_COL=0x00
>  CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_FDT_FIXUP_PARTITIONS=y
>  # CONFIG_EFI_UNICODE_CAPITALIZATION is not set
> --
> 2.20.1
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

* [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt
  2019-03-11 14:01   ` Igor Opaniuk
@ 2019-03-24 21:33     ` Marcel Ziswiler
  0 siblings, 0 replies; 38+ messages in thread
From: Marcel Ziswiler @ 2019-03-24 21:33 UTC (permalink / raw)
  To: u-boot

On Mon, 2019-03-11 at 14:01 +0000, Igor Opaniuk wrote:
> Off-topic: I'm just wondering, why no one introduced a proper Kconfig
> symbol for
> FDT_FIXUP_PARTITIONS. Currently there is no any description of this
> option through
> the code and what it's actually used for. But, anyway, it doesn't
> directly relate to this particular patch-set,
> it can be addressed in a separate patch.

Yeah, I agree. Can you please cook one up? Just ping me on slack should
you require any further explanations.

> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> 
> On Sat, 16 Feb 2019 at 00:27, Marcel Ziswiler <marcel@ziswiler.com>
> wrote:
> > From: Stefan Agner <stefan.agner@toradex.com>
> > 
> > Use device tree to set MTD partitions of the NAND chip.
> > 
> > Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> > Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> > 
> > ---
> > 
> >  configs/colibri_vf_defconfig | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/configs/colibri_vf_defconfig
> > b/configs/colibri_vf_defconfig
> > index 344fe77234..8f6cceca7f 100644
> > --- a/configs/colibri_vf_defconfig
> > +++ b/configs/colibri_vf_defconfig
> > @@ -91,4 +91,5 @@ CONFIG_VIDEO_FSL_DCU_FB=y
> >  CONFIG_VIDEO=y
> >  CONFIG_SYS_CONSOLE_FG_COL=0x00
> >  CONFIG_OF_LIBFDT_OVERLAY=y
> > +CONFIG_FDT_FIXUP_PARTITIONS=y
> >  # CONFIG_EFI_UNICODE_CAPITALIZATION is not set
> > --
> > 2.20.1
> > 
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > https://lists.denx.de/listinfo/u-boot
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

^ permalink raw reply	[flat|nested] 38+ messages in thread

end of thread, other threads:[~2019-03-24 21:33 UTC | newest]

Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-15 22:20 [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 01/22] add missing space in comment Marcel Ziswiler
2019-03-07  5:29   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
2019-03-11 13:27   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
2019-03-07  5:31   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
2019-03-07  5:39   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
2019-03-11 13:43   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
2019-03-07  5:37   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
2019-02-17 22:38   ` Lukasz Majewski
2019-02-15 22:20 ` [U-Boot] [PATCH v1 08/22] ARM: dts: colibri_vf: update device trees Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 09/22] configs: colibri_vf: disable obscure options Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
2019-03-06 16:48   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 13/22] colibri_vf: add distroboot support Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 14/22] colibri_vf: set fdtfile for distroboot Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 15/22] colibri_vf: sync the board info message Marcel Ziswiler
2019-03-06 16:53   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
2019-03-11 13:46   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
2019-03-11 13:51   ` Igor Opaniuk
2019-02-15 22:20 ` [U-Boot] [PATCH v1 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
2019-03-11 14:01   ` Igor Opaniuk
2019-03-24 21:33     ` Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 19/22] arm: vf610: add uart2 clock/pinmux support Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 20/22] colibri_vf: adjust timing according to data sheet Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 21/22] colibri_vf: use leveling evaluated by DDR validation tools Marcel Ziswiler
2019-02-15 22:20 ` [U-Boot] [PATCH v1 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
2019-03-06 15:30   ` Igor Opaniuk
2019-02-17 22:40 ` [U-Boot] [PATCH v1 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Lukasz Majewski

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.