* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
@ 2017-06-29 15:12 Jagan Teki
2017-06-29 15:16 ` Fabio Estevam
0 siblings, 1 reply; 7+ messages in thread
From: Jagan Teki @ 2017-06-29 15:12 UTC (permalink / raw)
To: buildroot
Hi,
Anyone tried gstreamer-imx on latest, I'm observing issues on decoder
setups. Please do let me know if I missing any config items.
Log:
-----
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Missing element: VP8 decoder
WARNING: from element
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0: No decoder
available for type 'video/x-vp8, width=(int)1920, height=(int)800,
pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)24/1'.
Additional debug info:
gsturidecodebin.c(938): unknown_type_cb ():
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0
Missing element: Vorbis decoder
WARNING: from element
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0: No decoder
available for type 'audio/x-vorbis, channels=(int)2, rate=(int)48000,
streamheader=(buffer)< 01766f72626973000000000280bb00000.
Additional debug info:
gsturidecodebin.c(938): unknown_type_cb ():
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0
ERROR: from element
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0: Your GStreamer
installation is missing a plug-in.
Additional debug info:
gsturidecodebin.c(1005): no_more_pads_full ():
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0:
no suitable plugins found:
gstdecodebin2.c(4592): gst_decode_bin_expose ():
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0:
no suitable plugins found:
Missing decoder: Vorbis (audio/x-vorbis, channels=(int)2,
rate=(int)48000, streamheader=(buffer)<
01766f72626973000000000280bb000000000000006b030000000000b801,
03766f726269732d000000586970682e4f7267206c6962566f7)
Missing decoder: VP8 (video/x-vp8, width=(int)1920, height=(int)800,
pixel-aspect-ratio=(fraction)1/1, framerate=(fraction)24/1)
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
thanks!
--
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
2017-06-29 15:12 [Buildroot] : gstreamer-imx issue with missing VP8 decoder Jagan Teki
@ 2017-06-29 15:16 ` Fabio Estevam
2017-06-29 15:18 ` Jagan Teki
0 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2017-06-29 15:16 UTC (permalink / raw)
To: buildroot
Hi Jagan,
On Thu, Jun 29, 2017 at 12:12 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> Hi,
>
> Anyone tried gstreamer-imx on latest, I'm observing issues on decoder
> setups. Please do let me know if I missing any config items.
Are you using a mainline kernel or NXP kernel?
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
2017-06-29 15:16 ` Fabio Estevam
@ 2017-06-29 15:18 ` Jagan Teki
2017-06-29 15:19 ` Fabio Estevam
0 siblings, 1 reply; 7+ messages in thread
From: Jagan Teki @ 2017-06-29 15:18 UTC (permalink / raw)
To: buildroot
On Thu, Jun 29, 2017 at 8:46 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Jagan,
>
> On Thu, Jun 29, 2017 at 12:12 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
>> Hi,
>>
>> Anyone tried gstreamer-imx on latest, I'm observing issues on decoder
>> setups. Please do let me know if I missing any config items.
>
> Are you using a mainline kernel or NXP kernel?
Mainline kernel
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
2017-06-29 15:18 ` Jagan Teki
@ 2017-06-29 15:19 ` Fabio Estevam
2017-06-29 17:04 ` Jagan Teki
0 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2017-06-29 15:19 UTC (permalink / raw)
To: buildroot
On Thu, Jun 29, 2017 at 12:18 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> Mainline kernel
In this case you don't need the gstreamer-imx package. You should use
the standard Gstreamer packages instead.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
2017-06-29 15:19 ` Fabio Estevam
@ 2017-06-29 17:04 ` Jagan Teki
2017-06-29 17:08 ` Michael Nazzareno Trimarchi
2017-06-29 17:44 ` Fabio Estevam
0 siblings, 2 replies; 7+ messages in thread
From: Jagan Teki @ 2017-06-29 17:04 UTC (permalink / raw)
To: buildroot
Hi Fabio,
On Thu, Jun 29, 2017 at 8:49 PM, Fabio Estevam <festevam@gmail.com> wrote:
> On Thu, Jun 29, 2017 at 12:18 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
>
>> Mainline kernel
>
> In this case you don't need the gstreamer-imx package. You should use
> the standard Gstreamer packages instead.
OK, now I moved with Gsteamer.
Now I'm observing an Error while playbin
Log:
----
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
ERROR: from element
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/GstTypeFindElement:typefind:
Stream contains no data.
Additional debug info:
gsttypefindelement.c(1126): gst_type_find_element_loop ():
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/GstTypeFindElement:typefind:
Can't typefind empty stream
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
Same file is launching well, on Ubuntu.
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
2017-06-29 17:04 ` Jagan Teki
@ 2017-06-29 17:08 ` Michael Nazzareno Trimarchi
2017-06-29 17:44 ` Fabio Estevam
1 sibling, 0 replies; 7+ messages in thread
From: Michael Nazzareno Trimarchi @ 2017-06-29 17:08 UTC (permalink / raw)
To: buildroot
Hi
On Jun 29, 2017 7:04 PM, "Jagan Teki" <jagannadh.teki@gmail.com> wrote:
Hi Fabio,
On Thu, Jun 29, 2017 at 8:49 PM, Fabio Estevam <festevam@gmail.com> wrote:
> On Thu, Jun 29, 2017 at 12:18 PM, Jagan Teki <jagannadh.teki@gmail.com>
wrote:
>
>> Mainline kernel
>
> In this case you don't need the gstreamer-imx package. You should use
> the standard Gstreamer packages instead.
OK, now I moved with Gsteamer.
Now I'm observing an Error while playbin
Log:
----
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
ERROR: from element
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/
GstTypeFindElement:typefind:
Stream contains no data.
Additional debug info:
gsttypefindelement.c(1126): gst_type_find_element_loop ():
/GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0/GstDecodeBin:decodebin0/
GstTypeFindElement:typefind:
Can't typefind empty stream
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
Same file is launching well, on Ubuntu.
Problem can be in the file? Could be that you miss some element able to
decode it. GST_DEBUG can give more info
Michael
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20170629/7bac48cd/attachment.html>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [Buildroot] : gstreamer-imx issue with missing VP8 decoder
2017-06-29 17:04 ` Jagan Teki
2017-06-29 17:08 ` Michael Nazzareno Trimarchi
@ 2017-06-29 17:44 ` Fabio Estevam
1 sibling, 0 replies; 7+ messages in thread
From: Fabio Estevam @ 2017-06-29 17:44 UTC (permalink / raw)
To: buildroot
Hi Jagan,
On Thu, Jun 29, 2017 at 2:04 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> OK, now I moved with Gsteamer.
>
> Now I'm observing an Error while playbin
Has the coda driver been properly loaded? Did you pass the VPU firmware?
I suggest you to start a thread at
gstreamer-devel at lists.freedesktop.org as this is not something related
to Buildroot.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-06-29 17:44 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-29 15:12 [Buildroot] : gstreamer-imx issue with missing VP8 decoder Jagan Teki
2017-06-29 15:16 ` Fabio Estevam
2017-06-29 15:18 ` Jagan Teki
2017-06-29 15:19 ` Fabio Estevam
2017-06-29 17:04 ` Jagan Teki
2017-06-29 17:08 ` Michael Nazzareno Trimarchi
2017-06-29 17:44 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.