From: Jagan Teki <jagan@amarulasolutions.com>
To: "Clément Péron" <peron.clem@gmail.com>
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
devicetree <devicetree@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-sunxi <linux-sunxi@googlegroups.com>
Subject: Re: [linux-sunxi] [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64
Date: Sun, 12 May 2019 23:58:18 +0530 [thread overview]
Message-ID: <CAMty3ZBTO9+9HLikR8=KgWZQBp+1yVgxQ_rD-E8WeJ8VvpuAcA@mail.gmail.com> (raw)
In-Reply-To: <20190512174608.10083-6-peron.clem@gmail.com>
On Sun, May 12, 2019 at 11:16 PM <peron.clem@gmail.com> wrote:
>
> From: Clément Péron <peron.clem@gmail.com>
>
> Enable and add supply to the Mali GPU node on the
> Pine H64 board.
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> index 4802902e128f..e16a8c6738f9 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> @@ -85,6 +85,11 @@
> status = "okay";
> };
>
> +&gpu {
> + mali-supply = <®_dcdcc>;
> + status = "okay";
> +};
I think we can squash all these board dts changes into single patch.
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: "Clément Péron" <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
Daniel Vetter <daniel-/w4YWyX8dFk@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Maxime Ripard
<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
dri-devel
<dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org>,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-kernel
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-arm-kernel
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
Subject: Re: [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64
Date: Sun, 12 May 2019 23:58:18 +0530 [thread overview]
Message-ID: <CAMty3ZBTO9+9HLikR8=KgWZQBp+1yVgxQ_rD-E8WeJ8VvpuAcA@mail.gmail.com> (raw)
In-Reply-To: <20190512174608.10083-6-peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
On Sun, May 12, 2019 at 11:16 PM <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
> From: Clément Péron <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> Enable and add supply to the Mali GPU node on the
> Pine H64 board.
>
> Signed-off-by: Clément Péron <peron.clem-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> index 4802902e128f..e16a8c6738f9 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> @@ -85,6 +85,11 @@
> status = "okay";
> };
>
> +&gpu {
> + mali-supply = <®_dcdcc>;
> + status = "okay";
> +};
I think we can squash all these board dts changes into single patch.
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/CAMty3ZBTO9%2B9HLikR8%3DKgWZQBp%2B1yVgxQ_rD-E8WeJ8VvpuAcA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: "Clément Péron" <peron.clem@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree <devicetree@vger.kernel.org>,
David Airlie <airlied@linux.ie>,
linux-sunxi <linux-sunxi@googlegroups.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh+dt@kernel.org>,
Daniel Vetter <daniel@ffwll.ch>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Subject: Re: [linux-sunxi] [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64
Date: Sun, 12 May 2019 23:58:18 +0530 [thread overview]
Message-ID: <CAMty3ZBTO9+9HLikR8=KgWZQBp+1yVgxQ_rD-E8WeJ8VvpuAcA@mail.gmail.com> (raw)
In-Reply-To: <20190512174608.10083-6-peron.clem@gmail.com>
On Sun, May 12, 2019 at 11:16 PM <peron.clem@gmail.com> wrote:
>
> From: Clément Péron <peron.clem@gmail.com>
>
> Enable and add supply to the Mali GPU node on the
> Pine H64 board.
>
> Signed-off-by: Clément Péron <peron.clem@gmail.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> index 4802902e128f..e16a8c6738f9 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
> @@ -85,6 +85,11 @@
> status = "okay";
> };
>
> +&gpu {
> + mali-supply = <®_dcdcc>;
> + status = "okay";
> +};
I think we can squash all these board dts changes into single patch.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-12 18:28 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-12 17:46 [PATCH v4 0/8] Allwinner H6 Mali GPU support peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 1/8] dt-bindings: gpu: mali-midgard: Add resets property peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 2/8] dt-bindings: gpu: add bus clock for Mali Midgard GPUs peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 3/8] dt-bindings: gpu: mali-midgard: Add H6 mali gpu compatible peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 4/8] arm64: dts: allwinner: Add ARM Mali GPU node for H6 peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 5/8] arm64: dts: allwinner: Add mali GPU supply for Pine H64 peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 18:28 ` Jagan Teki [this message]
2019-05-12 18:28 ` [linux-sunxi] " Jagan Teki
2019-05-12 18:28 ` Jagan Teki
2019-05-14 10:18 ` [linux-sunxi] " Chen-Yu Tsai
2019-05-14 10:18 ` Chen-Yu Tsai
2019-05-14 10:18 ` Chen-Yu Tsai
2019-05-14 15:22 ` [linux-sunxi] " Clément Péron
2019-05-14 15:22 ` Clément Péron
2019-05-14 15:22 ` Clément Péron
2019-05-12 17:46 ` [PATCH v4 6/8] arm64: dts: allwinner: Add mali GPU supply for Beelink GS1 peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 7/8] arm64: dts: allwinner: Add mali GPU supply for OrangePi Boards peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-12 17:46 ` [PATCH v4 8/8] arm64: dts: allwinner: Add mali GPU supply for OrangePi 3 peron.clem
2019-05-12 17:46 ` peron.clem
2019-05-12 17:46 ` peron.clem-Re5JQEeQqe8AvxtiuMwx3w
2019-05-13 15:14 ` [PATCH v4 0/8] Allwinner H6 Mali GPU support Daniel Vetter
2019-05-13 15:14 ` Daniel Vetter
2019-05-14 10:29 ` Neil Armstrong
2019-05-14 10:29 ` Neil Armstrong
2019-05-14 10:29 ` Neil Armstrong
2019-05-14 15:17 ` Clément Péron
2019-05-14 15:17 ` Clément Péron
2019-05-14 21:22 ` Clément Péron
2019-05-14 21:22 ` Clément Péron
2019-05-14 21:22 ` Clément Péron
2019-05-14 21:56 ` Robin Murphy
2019-05-14 21:56 ` Robin Murphy
2019-05-14 21:56 ` Robin Murphy
2019-05-15 22:05 ` Clément Péron
2019-05-15 22:05 ` Clément Péron
2019-05-15 22:05 ` Clément Péron
2019-05-15 23:22 ` Rob Herring
2019-05-15 23:22 ` Rob Herring
2019-05-16 11:19 ` Robin Murphy
2019-05-16 11:19 ` Robin Murphy
2019-05-16 13:21 ` Steven Price
2019-05-16 13:21 ` Steven Price
2019-05-25 19:50 ` [linux-sunxi] " Jernej Škrabec
2019-05-25 19:50 ` Jernej Škrabec
2019-05-25 19:50 ` Jernej Škrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMty3ZBTO9+9HLikR8=KgWZQBp+1yVgxQ_rD-E8WeJ8VvpuAcA@mail.gmail.com' \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=peron.clem@gmail.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.