[PATCH 0/7] arm64: dts: renesas: r8a7795: IPMMU upstream integration

[PATCH 0/7] arm64: dts: renesas: r8a7795: IPMMU upstream integration

[Simon Horman]

This series adds DT nodes for IPMMU instances on r8a7796 together with
connections to various r8a7796 on-chip devices such as Audio-DMAC, SYS-DMAC,
Ethernet-AVB and a bunch of multimedia devices that make use of FCP.

With these patches applied a white list enabled IPMMU driver may be used
to check silicon revision and then enable IPMMU in the known working cases.

The recommended IPMMU driver patch is iommu/next with the following applied:
 [PATCH v5 00/09] iommu/ipmmu-vmsa: r8a7795 support V5
 [PATCH v4 0/3] iommu/ipmmu-vmsa: r8a7796 support V4

The final patch in the series enable IPMMU support for all IPMMU
instances on r8a7796 that are used by IPMMU devices listed above.

The DT binding for r8a7796 have been acked (as part of the r8a7796 series
noted above) but have not yet been merged.

Based on work by Magnus Damm.

Based on renesas-devel-20171101-v4.14-rc7

Magnus Damm (3):
  arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1
  arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and
    MM

Simon Horman (4):
  arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP
  arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0
  arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0
  arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0

 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 128 +++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)

-- 
2.11.0

[PATCH 0/7] arm64: dts: renesas: r8a7795: IPMMU upstream integration

[Simon Horman]

This series adds DT nodes for IPMMU instances on r8a7796 together with
connections to various r8a7796 on-chip devices such as Audio-DMAC, SYS-DMAC,
Ethernet-AVB and a bunch of multimedia devices that make use of FCP.

With these patches applied a white list enabled IPMMU driver may be used
to check silicon revision and then enable IPMMU in the known working cases.

The recommended IPMMU driver patch is iommu/next with the following applied:
 [PATCH v5 00/09] iommu/ipmmu-vmsa: r8a7795 support V5
 [PATCH v4 0/3] iommu/ipmmu-vmsa: r8a7796 support V4

The final patch in the series enable IPMMU support for all IPMMU
instances on r8a7796 that are used by IPMMU devices listed above.

The DT binding for r8a7796 have been acked (as part of the r8a7796 series
noted above) but have not yet been merged.

Based on work by Magnus Damm.

Based on renesas-devel-20171101-v4.14-rc7

Magnus Damm (3):
  arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1
  arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and
    MM

Simon Horman (4):
  arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP
  arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0
  arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0
  arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0

 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 128 +++++++++++++++++++++++++++++++
 1 file changed, 128 insertions(+)

-- 
2.11.0

[PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add r8a7796 IPMMU nodes and keep all disabled by default.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: update names]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 89 ++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 8c94a313d9e1..cef1901736a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -357,6 +357,95 @@
 					     <&a53_3>;
 		};
 
+		ipmmu_vi0: mmu@febd0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfebd0000 0 0x1000>; /* IPMMU-VI0 */
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_vc0: mmu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfe6b0000 0 0x1000>; /* IPMMU-VC0 */
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_pv0: mmu@fd800000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd800000 0 0x1000>; /* IPMMU-PV0 */
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_pv1: mmu@fd950000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd950000 0 0x1000>; /* IPMMU-PV1 */
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ir: mmu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xff8b0000 0 0x1000>; /* IPMMU-IR */
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_hc: mmu@e6570000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6570000 0 0x1000>; /* IPMMU-HC */
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: mmu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xffc80000 0 0x1000>; /* IPMMU-RT */
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: mmu@ec670000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xec670000 0 0x1000>; /* IPMMU-MP */
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds0: mmu@e6740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6740000 0 0x1000>; /* IPMMU-DS0 */
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds1: mmu@e7740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe7740000 0 0x1000>; /* IPMMU-DS1 */
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mm: mmu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe67b0000 0 0x1000>; /* IPMMU-MM */
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7796-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
-- 
2.11.0

[PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Add r8a7796 IPMMU nodes and keep all disabled by default.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: update names]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 89 ++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 8c94a313d9e1..cef1901736a8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -357,6 +357,95 @@
 					     <&a53_3>;
 		};
 
+		ipmmu_vi0: mmu at febd0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfebd0000 0 0x1000>; /* IPMMU-VI0 */
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_vc0: mmu at fe6b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfe6b0000 0 0x1000>; /* IPMMU-VC0 */
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_pv0: mmu at fd800000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd800000 0 0x1000>; /* IPMMU-PV0 */
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_pv1: mmu at fd950000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xfd950000 0 0x1000>; /* IPMMU-PV1 */
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ir: mmu at ff8b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xff8b0000 0 0x1000>; /* IPMMU-IR */
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_hc: mmu at e6570000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6570000 0 0x1000>; /* IPMMU-HC */
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_rt: mmu at ffc80000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xffc80000 0 0x1000>; /* IPMMU-RT */
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mp: mmu at ec670000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xec670000 0 0x1000>; /* IPMMU-MP */
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds0: mmu at e6740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe6740000 0 0x1000>; /* IPMMU-DS0 */
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_ds1: mmu at e7740000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe7740000 0 0x1000>; /* IPMMU-DS1 */
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
+		ipmmu_mm: mmu at e67b0000 {
+			compatible = "renesas,ipmmu-r8a7796";
+			reg = <0 0xe67b0000 0 0x1000>; /* IPMMU-MM */
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			#iommu-cells = <1>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller at e6150000 {
 			compatible = "renesas,r8a7796-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
-- 
2.11.0

[PATCH 2/7] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Hook up r8a7796 DMAC nodes to the IPMMUs. In particular SYS-DMAC0
gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index cef1901736a8..de044c954638 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1190,6 +1190,14 @@
 			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac1: dma-controller@e7300000 {
@@ -1224,6 +1232,14 @@
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
 		};
 
 		dmac2: dma-controller@e7310000 {
@@ -1258,6 +1274,14 @@
 			resets = <&cpg 217>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
 		audma0: dma-controller@ec700000 {
-- 
2.11.0

[PATCH 2/7] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Hook up r8a7796 DMAC nodes to the IPMMUs. In particular SYS-DMAC0
gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index cef1901736a8..de044c954638 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1190,6 +1190,14 @@
 			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac1: dma-controller at e7300000 {
@@ -1224,6 +1232,14 @@
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
 		};
 
 		dmac2: dma-controller at e7310000 {
@@ -1258,6 +1274,14 @@
 			resets = <&cpg 217>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
 		audma0: dma-controller at ec700000 {
-- 
2.11.0

[PATCH 3/7] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP

[Simon Horman]

Hook up r8a7796 Audio-DMAC nodes to the IPMMU-MP.

Based on work for the r8a7795 by Magnus Damm.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index de044c954638..ce74a7ae47f4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1316,6 +1316,14 @@
 			resets = <&cpg 502>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
 		};
 
 		audma1: dma-controller@ec720000 {
@@ -1350,6 +1358,14 @@
 			resets = <&cpg 501>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
 		};
 
 		usb_dmac0: dma-controller@e65a0000 {
-- 
2.11.0

[PATCH 3/7] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP

[Simon Horman]

Hook up r8a7796 Audio-DMAC nodes to the IPMMU-MP.

Based on work for the r8a7795 by Magnus Damm.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index de044c954638..ce74a7ae47f4 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1316,6 +1316,14 @@
 			resets = <&cpg 502>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+			       <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+			       <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+			       <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+			       <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+			       <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+			       <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+			       <&ipmmu_mp 14>, <&ipmmu_mp 15>;
 		};
 
 		audma1: dma-controller at ec720000 {
@@ -1350,6 +1358,14 @@
 			resets = <&cpg 501>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+			       <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+			       <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+			       <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+			       <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+			       <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+			       <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+			       <&ipmmu_mp 30>, <&ipmmu_mp 31>;
 		};
 
 		usb_dmac0: dma-controller at e65a0000 {
-- 
2.11.0

[PATCH 4/7] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0

[Simon Horman]

Hook up the FCPF devices to allow use of FDP1 with IPMMU-VI0.

Based on work by Magnus Damm for the r8a7795.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index ce74a7ae47f4..d4c2e12daba7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1892,6 +1892,7 @@
 			clocks = <&cpg CPG_MOD 603>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
 		};
 
 		vspd1: vsp@fea28000 {
@@ -1911,6 +1912,7 @@
 			clocks = <&cpg CPG_MOD 602>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
 		};
 
 		vspd2: vsp@fea30000 {
@@ -1930,6 +1932,7 @@
 			clocks = <&cpg CPG_MOD 601>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
 		};
 
 		hdmi0: hdmi@fead0000 {
-- 
2.11.0

[PATCH 4/7] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0

[Simon Horman]

Hook up the FCPF devices to allow use of FDP1 with IPMMU-VI0.

Based on work by Magnus Damm for the r8a7795.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index ce74a7ae47f4..d4c2e12daba7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1892,6 +1892,7 @@
 			clocks = <&cpg CPG_MOD 603>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 603>;
+			iommus = <&ipmmu_vi0 8>;
 		};
 
 		vspd1: vsp at fea28000 {
@@ -1911,6 +1912,7 @@
 			clocks = <&cpg CPG_MOD 602>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 602>;
+			iommus = <&ipmmu_vi0 9>;
 		};
 
 		vspd2: vsp at fea30000 {
@@ -1930,6 +1932,7 @@
 			clocks = <&cpg CPG_MOD 601>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 601>;
+			iommus = <&ipmmu_vi0 10>;
 		};
 
 		hdmi0: hdmi at fead0000 {
-- 
2.11.0

[PATCH 5/7] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0

[Simon Horman]

Hook up the FCPVI devices to allow use of VSPI with IPMMU-VC0.

Based on work for the r8a7795 by Magnus Damm.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index d4c2e12daba7..c14ce1c47487 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1873,6 +1873,7 @@
 			clocks = <&cpg CPG_MOD 611>;
 			power-domains = <&sysc R8A7796_PD_A3VC>;
 			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
 		};
 
 		vspd0: vsp@fea20000 {
-- 
2.11.0

[PATCH 5/7] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0

[Simon Horman]

Hook up the FCPVI devices to allow use of VSPI with IPMMU-VC0.

Based on work for the r8a7795 by Magnus Damm.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index d4c2e12daba7..c14ce1c47487 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1873,6 +1873,7 @@
 			clocks = <&cpg CPG_MOD 611>;
 			power-domains = <&sysc R8A7796_PD_A3VC>;
 			resets = <&cpg 611>;
+			iommus = <&ipmmu_vc0 19>;
 		};
 
 		vspd0: vsp at fea20000 {
-- 
2.11.0

[PATCH 6/7] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0

[Simon Horman]

Add IPMMU-DS0 to the Ethernet-AVB device node.

Based on work by Magnus Damm for the r8a7795.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index c14ce1c47487..78160b4a380c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -906,6 +906,7 @@
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii-txid";
+			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
2.11.0

[PATCH 6/7] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0

[Simon Horman]

Add IPMMU-DS0 to the Ethernet-AVB device node.

Based on work by Magnus Damm for the r8a7795.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index c14ce1c47487..78160b4a380c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -906,6 +906,7 @@
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii-txid";
+			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
2.11.0

[PATCH 7/7] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Enable the r8a7795 device nodes for IPMMU-DS0, IPMMU-DS1, IPMMU-MP,
IPMMU-VI0, IPMMU-VC0 and the shared IPMMU-MM device.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: enable IPMMU-MP, VI0 and VC0]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 78160b4a380c..f0800f501116 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -362,7 +362,6 @@
 			reg = <0 0xfebd0000 0 0x1000>; /* IPMMU-VI0 */
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_vc0: mmu@fe6b0000 {
@@ -370,7 +369,6 @@
 			reg = <0 0xfe6b0000 0 0x1000>; /* IPMMU-VC0 */
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_pv0: mmu@fd800000 {
@@ -418,7 +416,6 @@
 			reg = <0 0xec670000 0 0x1000>; /* IPMMU-MP */
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_ds0: mmu@e6740000 {
@@ -426,7 +423,6 @@
 			reg = <0 0xe6740000 0 0x1000>; /* IPMMU-DS0 */
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_ds1: mmu@e7740000 {
@@ -434,7 +430,6 @@
 			reg = <0 0xe7740000 0 0x1000>; /* IPMMU-DS1 */
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_mm: mmu@e67b0000 {
@@ -443,7 +438,6 @@
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		cpg: clock-controller@e6150000 {
-- 
2.11.0

[PATCH 7/7] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM

[Simon Horman]

From: Magnus Damm <damm+renesas@opensource.se>

Enable the r8a7795 device nodes for IPMMU-DS0, IPMMU-DS1, IPMMU-MP,
IPMMU-VI0, IPMMU-VC0 and the shared IPMMU-MM device.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: enable IPMMU-MP, VI0 and VC0]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 78160b4a380c..f0800f501116 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -362,7 +362,6 @@
 			reg = <0 0xfebd0000 0 0x1000>; /* IPMMU-VI0 */
 			renesas,ipmmu-main = <&ipmmu_mm 9>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_vc0: mmu at fe6b0000 {
@@ -370,7 +369,6 @@
 			reg = <0 0xfe6b0000 0 0x1000>; /* IPMMU-VC0 */
 			renesas,ipmmu-main = <&ipmmu_mm 8>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_pv0: mmu at fd800000 {
@@ -418,7 +416,6 @@
 			reg = <0 0xec670000 0 0x1000>; /* IPMMU-MP */
 			renesas,ipmmu-main = <&ipmmu_mm 4>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_ds0: mmu at e6740000 {
@@ -426,7 +423,6 @@
 			reg = <0 0xe6740000 0 0x1000>; /* IPMMU-DS0 */
 			renesas,ipmmu-main = <&ipmmu_mm 0>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_ds1: mmu at e7740000 {
@@ -434,7 +430,6 @@
 			reg = <0 0xe7740000 0 0x1000>; /* IPMMU-DS1 */
 			renesas,ipmmu-main = <&ipmmu_mm 1>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		ipmmu_mm: mmu at e67b0000 {
@@ -443,7 +438,6 @@
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
 			#iommu-cells = <1>;
-			status = "disabled";
 		};
 
 		cpg: clock-controller at e6150000 {
-- 
2.11.0

Re: [PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Add r8a7796 IPMMU nodes and keep all disabled by default.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> [simon: update names]
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

My comments for r8a7795.dtsi about IPMMU-* comments and power-domains
properties are applicable here, too.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Add r8a7796 IPMMU nodes and keep all disabled by default.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> [simon: update names]
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

My comments for r8a7795.dtsi about IPMMU-* comments and power-domains
properties are applicable here, too.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 2/7] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Hook up r8a7796 DMAC nodes to the IPMMUs. In particular SYS-DMAC0
> gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 2/7] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Hook up r8a7796 DMAC nodes to the IPMMUs. In particular SYS-DMAC0
> gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 3/7] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hook up r8a7796 Audio-DMAC nodes to the IPMMU-MP.
>
> Based on work for the r8a7795 by Magnus Damm.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 3/7] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hook up r8a7796 Audio-DMAC nodes to the IPMMU-MP.
>
> Based on work for the r8a7795 by Magnus Damm.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 4/7] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hook up the FCPF devices to allow use of FDP1 with IPMMU-VI0.
>
> Based on work by Magnus Damm for the r8a7795.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 4/7] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hook up the FCPF devices to allow use of FDP1 with IPMMU-VI0.
>
> Based on work by Magnus Damm for the r8a7795.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 5/7] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hook up the FCPVI devices to allow use of VSPI with IPMMU-VC0.
>
> Based on work for the r8a7795 by Magnus Damm.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 5/7] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Hook up the FCPVI devices to allow use of VSPI with IPMMU-VC0.
>
> Based on work for the r8a7795 by Magnus Damm.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 6/7] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Add IPMMU-DS0 to the Ethernet-AVB device node.
>
> Based on work by Magnus Damm for the r8a7795.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 6/7] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> Add IPMMU-DS0 to the Ethernet-AVB device node.
>
> Based on work by Magnus Damm for the r8a7795.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 7/7] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Enable the r8a7795 device nodes for IPMMU-DS0, IPMMU-DS1, IPMMU-MP,
> IPMMU-VI0, IPMMU-VC0 and the shared IPMMU-MM device.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> [simon: enable IPMMU-MP, VI0 and VC0]
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH 7/7] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM

[Geert Uytterhoeven]

On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
<horms+renesas@verge.net.au> wrote:
> From: Magnus Damm <damm+renesas@opensource.se>
>
> Enable the r8a7795 device nodes for IPMMU-DS0, IPMMU-DS1, IPMMU-MP,
> IPMMU-VI0, IPMMU-VC0 and the shared IPMMU-MM device.
>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> [simon: enable IPMMU-MP, VI0 and VC0]
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes

[Simon Horman]

On Tue, Nov 07, 2017 at 10:54:17AM +0100, Geert Uytterhoeven wrote:
> On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
> <horms+renesas@verge.net.au> wrote:
> > From: Magnus Damm <damm+renesas@opensource.se>
> >
> > Add r8a7796 IPMMU nodes and keep all disabled by default.
> >
> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> > [simon: update names]
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> 
> My comments for r8a7795.dtsi about IPMMU-* comments and power-domains
> properties are applicable here, too.

Thanks, will fix.

[PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes

[Simon Horman]

On Tue, Nov 07, 2017 at 10:54:17AM +0100, Geert Uytterhoeven wrote:
> On Wed, Nov 1, 2017 at 11:34 AM, Simon Horman
> <horms+renesas@verge.net.au> wrote:
> > From: Magnus Damm <damm+renesas@opensource.se>
> >
> > Add r8a7796 IPMMU nodes and keep all disabled by default.
> >
> > Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
> > [simon: update names]
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> 
> My comments for r8a7795.dtsi about IPMMU-* comments and power-domains
> properties are applicable here, too.

Thanks, will fix.