* [PATCH v3 0/2] Renesas R8A7745 CPG/MSSR clock support
@ 2016-11-05 22:28 Sergei Shtylyov
2016-11-05 22:31 ` [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros Sergei Shtylyov
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Sergei Shtylyov @ 2016-11-05 22:28 UTC (permalink / raw)
To: mturquette, linux-clk, sboyd, robh+dt, mark.rutland, devicetree
Cc: linux-renesas-soc, horms+renesas
Hello.
Here's the set of 2 patches against the 'clk-next' branch of CLK group's
'linux.git' repo plus the R8A7743 CPG/MSSR patches just re-posted. They also
depend on the common R-Car Gen2 support patch. As the DT patches in the
R8A7745/SK-RZG1E board support series depend on the patch #1 of this series,
it might make sense to merge this patch to the 'renesas.git' repo as well...
[1/2] ARM: shmobile: r8a7745: add CPG clock index macros
[2/2] clk: renesas: cpg-mssr: add R8A7745 support
MBR, Sergei
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros
2016-11-05 22:28 [PATCH v3 0/2] Renesas R8A7745 CPG/MSSR clock support Sergei Shtylyov
@ 2016-11-05 22:31 ` Sergei Shtylyov
2016-11-07 8:34 ` Geert Uytterhoeven
2016-11-05 22:34 ` [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support Sergei Shtylyov
2016-11-08 21:25 ` [PATCH v4] " Sergei Shtylyov
2 siblings, 1 reply; 8+ messages in thread
From: Sergei Shtylyov @ 2016-11-05 22:31 UTC (permalink / raw)
To: robh+dt, mark.rutland
Cc: mturquette, linux-clk, sboyd, devicetree, linux-renesas-soc,
horms+renesas
Add macros usable by the device tree sources to reference the R8A7745 CPG
clocks by index. The data comes from the table 7.2c in the revision 0.50
of the RZ/G Series User's Manual.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 2:
- added Geert's tag.
include/dt-bindings/clock/r8a7745-cpg-mssr.h | 44 +++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
Index: linux/include/dt-bindings/clock/r8a7745-cpg-mssr.h
===================================================================
--- /dev/null
+++ linux/include/dt-bindings/clock/r8a7745-cpg-mssr.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_R8A7745_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R8A7745_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* r8a7745 CPG Core Clocks */
+#define R8A7745_CLK_Z2 0
+#define R8A7745_CLK_ZG 1
+#define R8A7745_CLK_ZTR 2
+#define R8A7745_CLK_ZTRD2 3
+#define R8A7745_CLK_ZT 4
+#define R8A7745_CLK_ZX 5
+#define R8A7745_CLK_ZS 6
+#define R8A7745_CLK_HP 7
+#define R8A7745_CLK_B 9
+#define R8A7745_CLK_LB 10
+#define R8A7745_CLK_P 11
+#define R8A7745_CLK_CL 12
+#define R8A7745_CLK_CP 13
+#define R8A7745_CLK_M2 14
+#define R8A7745_CLK_ZB3 16
+#define R8A7745_CLK_ZB3D2 17
+#define R8A7745_CLK_DDR 18
+#define R8A7745_CLK_SDH 19
+#define R8A7745_CLK_SD0 20
+#define R8A7745_CLK_SD2 21
+#define R8A7745_CLK_SD3 22
+#define R8A7745_CLK_MMC0 23
+#define R8A7745_CLK_MP 24
+#define R8A7745_CLK_QSPI 25
+#define R8A7745_CLK_ACP 26
+#define R8A7745_CLK_RCAN 27
+#define R8A7745_CLK_R 28
+#define R8A7745_CLK_OSC 29
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7745_CPG_MSSR_H__ */
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support
2016-11-05 22:28 [PATCH v3 0/2] Renesas R8A7745 CPG/MSSR clock support Sergei Shtylyov
2016-11-05 22:31 ` [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros Sergei Shtylyov
@ 2016-11-05 22:34 ` Sergei Shtylyov
2016-11-07 8:41 ` Geert Uytterhoeven
2016-11-08 21:25 ` [PATCH v4] " Sergei Shtylyov
2 siblings, 1 reply; 8+ messages in thread
From: Sergei Shtylyov @ 2016-11-05 22:34 UTC (permalink / raw)
To: mturquette, linux-clk, sboyd, robh+dt, mark.rutland, devicetree
Cc: linux-renesas-soc, horms+renesas
Add RZ/G1E (R8A7745) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
Changes in version 3:
- removed the FDP1-1 module clock;
- added Geert's tag.
Changes in version 2:
- changed the Z2 clock's divisor to 3.
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 5
drivers/clk/renesas/Kconfig | 1
drivers/clk/renesas/Makefile | 1
drivers/clk/renesas/r8a7745-cpg-mssr.c | 260 +++++++++++
drivers/clk/renesas/renesas-cpg-mssr.c | 6
drivers/clk/renesas/renesas-cpg-mssr.h | 1
6 files changed, 272 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -14,6 +14,7 @@ They provide the following functionaliti
Required Properties:
- compatible: Must be one of:
- "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
+ - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -23,8 +24,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7743, r8a7795, r8a7796)
- - "usb_extal" (r8a7743)
+ - "extal" (r8a7743, r8a7745, r8a7795, r8a7796)
+ - "usb_extal" (r8a7743, r8a7745)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
Index: linux/drivers/clk/renesas/Kconfig
===================================================================
--- linux.orig/drivers/clk/renesas/Kconfig
+++ linux/drivers/clk/renesas/Kconfig
@@ -1,6 +1,7 @@
config CLK_RENESAS_CPG_MSSR
bool
default y if ARCH_R8A7743
+ default y if ARCH_R8A7745
default y if ARCH_R8A7795
default y if ARCH_R8A7796
Index: linux/drivers/clk/renesas/Makefile
===================================================================
--- linux.orig/drivers/clk/renesas/Makefile
+++ linux/drivers/clk/renesas/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7743) += r8a7743-cpg-mssr.o rcar-gen2-cpg.o
+obj-$(CONFIG_ARCH_R8A7745) += r8a7745-cpg-mssr.o rcar-gen2-cpg.o
obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
Index: linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
===================================================================
--- /dev/null
+++ linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
@@ -0,0 +1,260 @@
+/*
+ * r8a7745 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7745_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_USB_EXTAL,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL3,
+ CLK_PLL1_DIV2,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7745_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("usb_extal", CLK_USB_EXTAL),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_BASE("lb", R8A7745_CLK_LB, CLK_TYPE_GEN2_LB, CLK_PLL1),
+ DEF_BASE("sdh", R8A7745_CLK_SDH, CLK_TYPE_GEN2_SDH, CLK_PLL1),
+ DEF_BASE("sd0", R8A7745_CLK_SD0, CLK_TYPE_GEN2_SD0, CLK_PLL1),
+ DEF_BASE("qspi", R8A7745_CLK_QSPI, CLK_TYPE_GEN2_QSPI, CLK_PLL1_DIV2),
+ DEF_BASE("rcan", R8A7745_CLK_RCAN, CLK_TYPE_GEN2_RCAN, CLK_USB_EXTAL),
+
+ DEF_FIXED("z2", R8A7745_CLK_Z2, CLK_PLL0, 3, 1),
+ DEF_FIXED("zg", R8A7745_CLK_ZG, CLK_PLL1, 6, 1),
+ DEF_FIXED("zx", R8A7745_CLK_ZX, CLK_PLL1, 3, 1),
+ DEF_FIXED("zs", R8A7745_CLK_ZS, CLK_PLL1, 6, 1),
+ DEF_FIXED("hp", R8A7745_CLK_HP, CLK_PLL1, 12, 1),
+ DEF_FIXED("b", R8A7745_CLK_B, CLK_PLL1, 12, 1),
+ DEF_FIXED("p", R8A7745_CLK_P, CLK_PLL1, 24, 1),
+ DEF_FIXED("cl", R8A7745_CLK_CL, CLK_PLL1, 48, 1),
+ DEF_FIXED("cp", R8A7745_CLK_CP, CLK_PLL1, 48, 1),
+ DEF_FIXED("m2", R8A7745_CLK_M2, CLK_PLL1, 8, 1),
+ DEF_FIXED("zb3", R8A7745_CLK_ZB3, CLK_PLL3, 4, 1),
+ DEF_FIXED("zb3d2", R8A7745_CLK_ZB3D2, CLK_PLL3, 8, 1),
+ DEF_FIXED("ddr", R8A7745_CLK_DDR, CLK_PLL3, 8, 1),
+ DEF_FIXED("mp", R8A7745_CLK_MP, CLK_PLL1_DIV2, 15, 1),
+ DEF_FIXED("acp", R8A7745_CLK_ACP, CLK_EXTAL, 2, 1),
+ DEF_FIXED("r", R8A7745_CLK_R, CLK_PLL1, 49152, 1),
+ DEF_FIXED("osc", R8A7745_CLK_OSC, CLK_PLL1, 12288, 1),
+
+ DEF_DIV6P1("sd2", R8A7745_CLK_SD2, CLK_PLL1_DIV2, 0x078),
+ DEF_DIV6P1("sd3", R8A7745_CLK_SD3, CLK_PLL1_DIV2, 0x26c),
+ DEF_DIV6P1("mmc0", R8A7745_CLK_MMC0, CLK_PLL1_DIV2, 0x240),
+};
+
+static const struct mssr_mod_clk r8a7745_mod_clks[] __initconst = {
+ DEF_MOD("msiof0", 0, R8A7745_CLK_MP),
+ DEF_MOD("vcp0", 101, R8A7745_CLK_ZS),
+ DEF_MOD("vpc0", 103, R8A7745_CLK_ZS),
+ DEF_MOD("tmu1", 111, R8A7745_CLK_P),
+ DEF_MOD("3dg", 112, R8A7745_CLK_ZG),
+ DEF_MOD("2d-dmac", 115, R8A7745_CLK_ZS),
+ DEF_MOD("fdp1-0", 119, R8A7745_CLK_ZS),
+ DEF_MOD("tmu3", 121, R8A7745_CLK_P),
+ DEF_MOD("tmu2", 122, R8A7745_CLK_P),
+ DEF_MOD("cmt0", 124, R8A7745_CLK_R),
+ DEF_MOD("tmu0", 125, R8A7745_CLK_CP),
+ DEF_MOD("vsp1du0", 128, R8A7745_CLK_ZS),
+ DEF_MOD("vsp1-sy", 131, R8A7745_CLK_ZS),
+ DEF_MOD("scifa2", 202, R8A7745_CLK_MP),
+ DEF_MOD("scifa1", 203, R8A7745_CLK_MP),
+ DEF_MOD("scifa0", 204, R8A7745_CLK_MP),
+ DEF_MOD("msiof2", 205, R8A7745_CLK_MP),
+ DEF_MOD("scifb0", 206, R8A7745_CLK_MP),
+ DEF_MOD("scifb1", 207, R8A7745_CLK_MP),
+ DEF_MOD("msiof1", 208, R8A7745_CLK_MP),
+ DEF_MOD("scifb2", 216, R8A7745_CLK_MP),
+ DEF_MOD("sys-dmac1", 218, R8A7745_CLK_ZS),
+ DEF_MOD("sys-dmac0", 219, R8A7745_CLK_ZS),
+ DEF_MOD("tpu0", 304, R8A7745_CLK_CP),
+ DEF_MOD("sdhi3", 311, R8A7745_CLK_SD3),
+ DEF_MOD("sdhi2", 312, R8A7745_CLK_SD2),
+ DEF_MOD("sdhi0", 314, R8A7745_CLK_SD0),
+ DEF_MOD("mmcif0", 315, R8A7745_CLK_MMC0),
+ DEF_MOD("iic0", 318, R8A7745_CLK_HP),
+ DEF_MOD("iic1", 323, R8A7745_CLK_HP),
+ DEF_MOD("cmt1", 329, R8A7745_CLK_R),
+ DEF_MOD("usbhs-dmac0", 330, R8A7745_CLK_HP),
+ DEF_MOD("usbhs-dmac1", 331, R8A7745_CLK_HP),
+ DEF_MOD("irqc", 407, R8A7745_CLK_CP),
+ DEF_MOD("intc-sys", 408, R8A7745_CLK_ZS),
+ DEF_MOD("audio-dmac0", 502, R8A7745_CLK_HP),
+ DEF_MOD("thermal", 522, CLK_EXTAL),
+ DEF_MOD("pwm", 523, R8A7745_CLK_P),
+ DEF_MOD("usb-ehci", 703, R8A7745_CLK_MP),
+ DEF_MOD("usbhs", 704, R8A7745_CLK_HP),
+ DEF_MOD("hscif2", 713, R8A7745_CLK_ZS),
+ DEF_MOD("scif5", 714, R8A7745_CLK_P),
+ DEF_MOD("scif4", 715, R8A7745_CLK_P),
+ DEF_MOD("hscif1", 716, R8A7745_CLK_ZS),
+ DEF_MOD("hscif0", 717, R8A7745_CLK_ZS),
+ DEF_MOD("scif3", 718, R8A7745_CLK_P),
+ DEF_MOD("scif2", 719, R8A7745_CLK_P),
+ DEF_MOD("scif1", 720, R8A7745_CLK_P),
+ DEF_MOD("scif0", 721, R8A7745_CLK_P),
+ DEF_MOD("du0", 724, R8A7745_CLK_ZX),
+ DEF_MOD("ipmmu-sgx", 800, R8A7745_CLK_ZX),
+ DEF_MOD("vin1", 810, R8A7745_CLK_ZG),
+ DEF_MOD("vin0", 811, R8A7745_CLK_ZG),
+ DEF_MOD("etheravb", 812, R8A7745_CLK_HP),
+ DEF_MOD("ether", 813, R8A7745_CLK_P),
+ DEF_MOD("gpio6", 905, R8A7745_CLK_CP),
+ DEF_MOD("gpio5", 907, R8A7745_CLK_CP),
+ DEF_MOD("gpio4", 908, R8A7745_CLK_CP),
+ DEF_MOD("gpio3", 909, R8A7745_CLK_CP),
+ DEF_MOD("gpio2", 910, R8A7745_CLK_CP),
+ DEF_MOD("gpio1", 911, R8A7745_CLK_CP),
+ DEF_MOD("gpio0", 912, R8A7745_CLK_CP),
+ DEF_MOD("can1", 915, R8A7745_CLK_P),
+ DEF_MOD("can0", 916, R8A7745_CLK_P),
+ DEF_MOD("qspi_mod", 917, R8A7745_CLK_QSPI),
+ DEF_MOD("i2c5", 925, R8A7745_CLK_HP),
+ DEF_MOD("i2c4", 927, R8A7745_CLK_HP),
+ DEF_MOD("i2c3", 928, R8A7745_CLK_HP),
+ DEF_MOD("i2c2", 929, R8A7745_CLK_HP),
+ DEF_MOD("i2c1", 930, R8A7745_CLK_HP),
+ DEF_MOD("i2c0", 931, R8A7745_CLK_HP),
+ DEF_MOD("ssi-all", 1005, R8A7745_CLK_P),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7745_CLK_P),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+ DEF_MOD("scifa3", 1106, R8A7745_CLK_MP),
+ DEF_MOD("scifa4", 1107, R8A7745_CLK_MP),
+ DEF_MOD("scifa5", 1108, R8A7745_CLK_MP),
+};
+
+static const unsigned int r8a7745_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(408), /* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *2
+ *---------------------------------------------------
+ * 0 0 0 15 x200/3 x208/2 x106
+ * 0 0 1 15 x200/3 x208/2 x88
+ * 0 1 0 20 x150/3 x156/2 x80
+ * 0 1 1 20 x150/3 x156/2 x66
+ * 1 0 0 26 / 2 x230/3 x240/2 x122
+ * 1 0 1 26 / 2 x230/3 x240/2 x102
+ * 1 1 0 30 / 2 x200/3 x208/2 x106
+ * 1 1 1 30 / 2 x200/3 x208/2 x88
+ *
+ * *1 : Table 7.5b indicates VCO output (PLL0 = VCO/3)
+ * *2 : Table 7.5b indicates VCO output (PLL1 = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult PLL0 mult */
+ { 1, 208, 106, 200 },
+ { 1, 208, 88, 200 },
+ { 1, 156, 80, 150 },
+ { 1, 156, 66, 150 },
+ { 2, 240, 122, 230 },
+ { 2, 240, 102, 230 },
+ { 2, 208, 106, 200 },
+ { 2, 208, 88, 200 },
+};
+
+static int __init r8a7745_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ return rcar_gen2_cpg_init(cpg_pll_config);
+}
+
+const struct cpg_mssr_info r8a7745_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a7745_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a7745_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a7745_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a7745_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a7745_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a7745_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a7745_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen2_cpg_clk_register,
+};
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.c
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.c
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -509,6 +509,12 @@ static const struct of_device_id cpg_mss
.data = &r8a7743_cpg_mssr_info,
},
#endif
+#ifdef CONFIG_ARCH_R8A7745
+ {
+ .compatible = "renesas,r8a7745-cpg-mssr",
+ .data = &r8a7745_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_ARCH_R8A7795
{
.compatible = "renesas,r8a7795-cpg-mssr",
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.h
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.h
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -131,6 +131,7 @@ struct cpg_mssr_info {
};
extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a7745_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros
2016-11-05 22:31 ` [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros Sergei Shtylyov
@ 2016-11-07 8:34 ` Geert Uytterhoeven
2016-11-07 18:41 ` Geert Uytterhoeven
0 siblings, 1 reply; 8+ messages in thread
From: Geert Uytterhoeven @ 2016-11-07 8:34 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Rob Herring, Mark Rutland, Michael Turquette, linux-clk,
Stephen Boyd, devicetree, Linux-Renesas, Simon Horman
Hi Sergei,
On Sat, Nov 5, 2016 at 11:31 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add macros usable by the device tree sources to reference the R8A7745 CPG
> clocks by index. The data comes from the table 7.2c in the revision 0.50
> of the RZ/G Series User's Manual.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> ---
> Changes in version 2:
> - added Geert's tag.
>
> include/dt-bindings/clock/r8a7745-cpg-mssr.h | 44 +++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> Index: linux/include/dt-bindings/clock/r8a7745-cpg-mssr.h
> ===================================================================
> --- /dev/null
> +++ linux/include/dt-bindings/clock/r8a7745-cpg-mssr.h
> +#define R8A7745_CLK_ACP 26
This clock is called CPEX instead of ACP in rev. 1.00 of the RZ/G Series User's
Manual: Hardware.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support
2016-11-05 22:34 ` [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support Sergei Shtylyov
@ 2016-11-07 8:41 ` Geert Uytterhoeven
0 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2016-11-07 8:41 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Michael Turquette, linux-clk, Stephen Boyd, Rob Herring,
Mark Rutland, devicetree, Linux-Renesas, Simon Horman
Hi Sergei,
On Sat, Nov 5, 2016 at 11:34 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add RZ/G1E (R8A7745) Clock Pulse Generator / Module Standby and Software
> Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
> (and RZ/G) code.
>
> Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
> <geert+renesas@glider.be>.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> ---
> Changes in version 3:
> - removed the FDP1-1 module clock;
> - added Geert's tag.
>
> Changes in version 2:
> - changed the Z2 clock's divisor to 3.
> --- /dev/null
> +++ linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
> @@ -0,0 +1,260 @@
> +static const struct cpg_core_clk r8a7745_core_clks[] __initconst = {
> + /* Core Clock Outputs */
> + DEF_FIXED("acp", R8A7745_CLK_ACP, CLK_EXTAL, 2, 1),
This clock is called CPEX instead of ACP in rev. 1.00 of the RZ/G Series User's
Manual: Hardware.
> +};
> +
> +static const struct mssr_mod_clk r8a7745_mod_clks[] __initconst = {
> + DEF_MOD("thermal", 522, CLK_EXTAL),
RZ/G1E does not have the thermal sensor (confirmed by rev. 1.00).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros
2016-11-07 8:34 ` Geert Uytterhoeven
@ 2016-11-07 18:41 ` Geert Uytterhoeven
0 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2016-11-07 18:41 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Rob Herring, Mark Rutland, Michael Turquette, linux-clk,
Stephen Boyd, devicetree, Linux-Renesas, Simon Horman
On Mon, Nov 7, 2016 at 9:34 AM, Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> On Sat, Nov 5, 2016 at 11:31 PM, Sergei Shtylyov
> <sergei.shtylyov@cogentembedded.com> wrote:
>> Add macros usable by the device tree sources to reference the R8A7745 CPG
>> clocks by index. The data comes from the table 7.2c in the revision 0.50
>> of the RZ/G Series User's Manual.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>>
>> ---
>> Changes in version 2:
>> - added Geert's tag.
>>
>> include/dt-bindings/clock/r8a7745-cpg-mssr.h | 44 +++++++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>>
>> Index: linux/include/dt-bindings/clock/r8a7745-cpg-mssr.h
>> ===================================================================
>> --- /dev/null
>> +++ linux/include/dt-bindings/clock/r8a7745-cpg-mssr.h
>
>> +#define R8A7745_CLK_ACP 26
>
> This clock is called CPEX instead of ACP in rev. 1.00 of the RZ/G Series User's
> Manual: Hardware.
Applied with s/ACP/CPEX/, and included in second clk-renesas-for-v4.10
pull request.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v4] clk: renesas: cpg-mssr: add R8A7745 support
2016-11-05 22:28 [PATCH v3 0/2] Renesas R8A7745 CPG/MSSR clock support Sergei Shtylyov
2016-11-05 22:31 ` [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros Sergei Shtylyov
2016-11-05 22:34 ` [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support Sergei Shtylyov
@ 2016-11-08 21:25 ` Sergei Shtylyov
2016-11-10 12:53 ` Geert Uytterhoeven
2 siblings, 1 reply; 8+ messages in thread
From: Sergei Shtylyov @ 2016-11-08 21:25 UTC (permalink / raw)
To: mturquette, linux-clk, sboyd, robh+dt, mark.rutland, devicetree
Cc: linux-renesas-soc, horms+renesas
Add RZ/G1E (R8A7745) Clock Pulse Generator / Module Standby and Software
Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
(and RZ/G) code.
Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
<geert+renesas@glider.be>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This patch is against the 'clk-next' branch of CLK group's 'linux.git' repo
plus the R8A7743 clock driver patch. It depends on the common R-Car gen2 (and
RZ/G) support just posted.
Changes in version 4:
- changed the Z2 clock's divisor to 1;
- passed the PLL0 divisor to rcar_gen2_cpg_init();
- renamed the ACP clock to CPEX;
- removed the thermal module clock.
Changes in version 3:
- removed the FDP1-1 module clock;
- added Geert's tag.
Changes in version 2:
- changed the Z2 clock's divisor to 3.
Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt | 5
drivers/clk/renesas/Kconfig | 1
drivers/clk/renesas/Makefile | 1
drivers/clk/renesas/r8a7745-cpg-mssr.c | 259 +++++++++++
drivers/clk/renesas/renesas-cpg-mssr.c | 6
drivers/clk/renesas/renesas-cpg-mssr.h | 1
6 files changed, 271 insertions(+), 2 deletions(-)
Index: linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
===================================================================
--- linux.orig/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ linux/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -14,6 +14,7 @@ They provide the following functionaliti
Required Properties:
- compatible: Must be one of:
- "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
+ - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
- "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3)
- "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W)
@@ -23,8 +24,8 @@ Required Properties:
- clocks: References to external parent clocks, one entry for each entry in
clock-names
- clock-names: List of external parent clock names. Valid names are:
- - "extal" (r8a7743, r8a7795, r8a7796)
- - "usb_extal" (r8a7743)
+ - "extal" (r8a7743, r8a7745, r8a7795, r8a7796)
+ - "usb_extal" (r8a7743, r8a7745)
- "extalr" (r8a7795, r8a7796)
- #clock-cells: Must be 2
Index: linux/drivers/clk/renesas/Kconfig
===================================================================
--- linux.orig/drivers/clk/renesas/Kconfig
+++ linux/drivers/clk/renesas/Kconfig
@@ -1,6 +1,7 @@
config CLK_RENESAS_CPG_MSSR
bool
default y if ARCH_R8A7743
+ default y if ARCH_R8A7745
default y if ARCH_R8A7795
default y if ARCH_R8A7796
Index: linux/drivers/clk/renesas/Makefile
===================================================================
--- linux.orig/drivers/clk/renesas/Makefile
+++ linux/drivers/clk/renesas/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o clk-div6.o
obj-$(CONFIG_ARCH_R8A7743) += r8a7743-cpg-mssr.o rcar-gen2-cpg.o
+obj-$(CONFIG_ARCH_R8A7745) += r8a7745-cpg-mssr.o rcar-gen2-cpg.o
obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o clk-div6.o
Index: linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
===================================================================
--- /dev/null
+++ linux/drivers/clk/renesas/r8a7745-cpg-mssr.c
@@ -0,0 +1,259 @@
+/*
+ * r8a7745 Clock Pulse Generator / Module Standby and Software Reset
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation; of the License.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/soc/renesas/rcar-rst.h>
+
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+
+#include "renesas-cpg-mssr.h"
+#include "rcar-gen2-cpg.h"
+
+enum clk_ids {
+ /* Core Clock Outputs exported to DT */
+ LAST_DT_CORE_CLK = R8A7745_CLK_OSC,
+
+ /* External Input Clocks */
+ CLK_EXTAL,
+ CLK_USB_EXTAL,
+
+ /* Internal Core Clocks */
+ CLK_MAIN,
+ CLK_PLL0,
+ CLK_PLL1,
+ CLK_PLL3,
+ CLK_PLL1_DIV2,
+
+ /* Module Clocks */
+ MOD_CLK_BASE
+};
+
+static const struct cpg_core_clk r8a7745_core_clks[] __initconst = {
+ /* External Clock Inputs */
+ DEF_INPUT("extal", CLK_EXTAL),
+ DEF_INPUT("usb_extal", CLK_USB_EXTAL),
+
+ /* Internal Core Clocks */
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN2_MAIN, CLK_EXTAL),
+ DEF_BASE(".pll0", CLK_PLL0, CLK_TYPE_GEN2_PLL0, CLK_MAIN),
+ DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN2_PLL1, CLK_MAIN),
+ DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN2_PLL3, CLK_MAIN),
+
+ DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
+
+ /* Core Clock Outputs */
+ DEF_BASE("lb", R8A7745_CLK_LB, CLK_TYPE_GEN2_LB, CLK_PLL1),
+ DEF_BASE("sdh", R8A7745_CLK_SDH, CLK_TYPE_GEN2_SDH, CLK_PLL1),
+ DEF_BASE("sd0", R8A7745_CLK_SD0, CLK_TYPE_GEN2_SD0, CLK_PLL1),
+ DEF_BASE("qspi", R8A7745_CLK_QSPI, CLK_TYPE_GEN2_QSPI, CLK_PLL1_DIV2),
+ DEF_BASE("rcan", R8A7745_CLK_RCAN, CLK_TYPE_GEN2_RCAN, CLK_USB_EXTAL),
+
+ DEF_FIXED("z2", R8A7745_CLK_Z2, CLK_PLL0, 1, 1),
+ DEF_FIXED("zg", R8A7745_CLK_ZG, CLK_PLL1, 6, 1),
+ DEF_FIXED("zx", R8A7745_CLK_ZX, CLK_PLL1, 3, 1),
+ DEF_FIXED("zs", R8A7745_CLK_ZS, CLK_PLL1, 6, 1),
+ DEF_FIXED("hp", R8A7745_CLK_HP, CLK_PLL1, 12, 1),
+ DEF_FIXED("b", R8A7745_CLK_B, CLK_PLL1, 12, 1),
+ DEF_FIXED("p", R8A7745_CLK_P, CLK_PLL1, 24, 1),
+ DEF_FIXED("cl", R8A7745_CLK_CL, CLK_PLL1, 48, 1),
+ DEF_FIXED("cp", R8A7745_CLK_CP, CLK_PLL1, 48, 1),
+ DEF_FIXED("m2", R8A7745_CLK_M2, CLK_PLL1, 8, 1),
+ DEF_FIXED("zb3", R8A7745_CLK_ZB3, CLK_PLL3, 4, 1),
+ DEF_FIXED("zb3d2", R8A7745_CLK_ZB3D2, CLK_PLL3, 8, 1),
+ DEF_FIXED("ddr", R8A7745_CLK_DDR, CLK_PLL3, 8, 1),
+ DEF_FIXED("mp", R8A7745_CLK_MP, CLK_PLL1_DIV2, 15, 1),
+ DEF_FIXED("cpex", R8A7745_CLK_CPEX, CLK_EXTAL, 2, 1),
+ DEF_FIXED("r", R8A7745_CLK_R, CLK_PLL1, 49152, 1),
+ DEF_FIXED("osc", R8A7745_CLK_OSC, CLK_PLL1, 12288, 1),
+
+ DEF_DIV6P1("sd2", R8A7745_CLK_SD2, CLK_PLL1_DIV2, 0x078),
+ DEF_DIV6P1("sd3", R8A7745_CLK_SD3, CLK_PLL1_DIV2, 0x26c),
+ DEF_DIV6P1("mmc0", R8A7745_CLK_MMC0, CLK_PLL1_DIV2, 0x240),
+};
+
+static const struct mssr_mod_clk r8a7745_mod_clks[] __initconst = {
+ DEF_MOD("msiof0", 0, R8A7745_CLK_MP),
+ DEF_MOD("vcp0", 101, R8A7745_CLK_ZS),
+ DEF_MOD("vpc0", 103, R8A7745_CLK_ZS),
+ DEF_MOD("tmu1", 111, R8A7745_CLK_P),
+ DEF_MOD("3dg", 112, R8A7745_CLK_ZG),
+ DEF_MOD("2d-dmac", 115, R8A7745_CLK_ZS),
+ DEF_MOD("fdp1-0", 119, R8A7745_CLK_ZS),
+ DEF_MOD("tmu3", 121, R8A7745_CLK_P),
+ DEF_MOD("tmu2", 122, R8A7745_CLK_P),
+ DEF_MOD("cmt0", 124, R8A7745_CLK_R),
+ DEF_MOD("tmu0", 125, R8A7745_CLK_CP),
+ DEF_MOD("vsp1du0", 128, R8A7745_CLK_ZS),
+ DEF_MOD("vsp1-sy", 131, R8A7745_CLK_ZS),
+ DEF_MOD("scifa2", 202, R8A7745_CLK_MP),
+ DEF_MOD("scifa1", 203, R8A7745_CLK_MP),
+ DEF_MOD("scifa0", 204, R8A7745_CLK_MP),
+ DEF_MOD("msiof2", 205, R8A7745_CLK_MP),
+ DEF_MOD("scifb0", 206, R8A7745_CLK_MP),
+ DEF_MOD("scifb1", 207, R8A7745_CLK_MP),
+ DEF_MOD("msiof1", 208, R8A7745_CLK_MP),
+ DEF_MOD("scifb2", 216, R8A7745_CLK_MP),
+ DEF_MOD("sys-dmac1", 218, R8A7745_CLK_ZS),
+ DEF_MOD("sys-dmac0", 219, R8A7745_CLK_ZS),
+ DEF_MOD("tpu0", 304, R8A7745_CLK_CP),
+ DEF_MOD("sdhi3", 311, R8A7745_CLK_SD3),
+ DEF_MOD("sdhi2", 312, R8A7745_CLK_SD2),
+ DEF_MOD("sdhi0", 314, R8A7745_CLK_SD0),
+ DEF_MOD("mmcif0", 315, R8A7745_CLK_MMC0),
+ DEF_MOD("iic0", 318, R8A7745_CLK_HP),
+ DEF_MOD("iic1", 323, R8A7745_CLK_HP),
+ DEF_MOD("cmt1", 329, R8A7745_CLK_R),
+ DEF_MOD("usbhs-dmac0", 330, R8A7745_CLK_HP),
+ DEF_MOD("usbhs-dmac1", 331, R8A7745_CLK_HP),
+ DEF_MOD("irqc", 407, R8A7745_CLK_CP),
+ DEF_MOD("intc-sys", 408, R8A7745_CLK_ZS),
+ DEF_MOD("audio-dmac0", 502, R8A7745_CLK_HP),
+ DEF_MOD("pwm", 523, R8A7745_CLK_P),
+ DEF_MOD("usb-ehci", 703, R8A7745_CLK_MP),
+ DEF_MOD("usbhs", 704, R8A7745_CLK_HP),
+ DEF_MOD("hscif2", 713, R8A7745_CLK_ZS),
+ DEF_MOD("scif5", 714, R8A7745_CLK_P),
+ DEF_MOD("scif4", 715, R8A7745_CLK_P),
+ DEF_MOD("hscif1", 716, R8A7745_CLK_ZS),
+ DEF_MOD("hscif0", 717, R8A7745_CLK_ZS),
+ DEF_MOD("scif3", 718, R8A7745_CLK_P),
+ DEF_MOD("scif2", 719, R8A7745_CLK_P),
+ DEF_MOD("scif1", 720, R8A7745_CLK_P),
+ DEF_MOD("scif0", 721, R8A7745_CLK_P),
+ DEF_MOD("du0", 724, R8A7745_CLK_ZX),
+ DEF_MOD("ipmmu-sgx", 800, R8A7745_CLK_ZX),
+ DEF_MOD("vin1", 810, R8A7745_CLK_ZG),
+ DEF_MOD("vin0", 811, R8A7745_CLK_ZG),
+ DEF_MOD("etheravb", 812, R8A7745_CLK_HP),
+ DEF_MOD("ether", 813, R8A7745_CLK_P),
+ DEF_MOD("gpio6", 905, R8A7745_CLK_CP),
+ DEF_MOD("gpio5", 907, R8A7745_CLK_CP),
+ DEF_MOD("gpio4", 908, R8A7745_CLK_CP),
+ DEF_MOD("gpio3", 909, R8A7745_CLK_CP),
+ DEF_MOD("gpio2", 910, R8A7745_CLK_CP),
+ DEF_MOD("gpio1", 911, R8A7745_CLK_CP),
+ DEF_MOD("gpio0", 912, R8A7745_CLK_CP),
+ DEF_MOD("can1", 915, R8A7745_CLK_P),
+ DEF_MOD("can0", 916, R8A7745_CLK_P),
+ DEF_MOD("qspi_mod", 917, R8A7745_CLK_QSPI),
+ DEF_MOD("i2c5", 925, R8A7745_CLK_HP),
+ DEF_MOD("i2c4", 927, R8A7745_CLK_HP),
+ DEF_MOD("i2c3", 928, R8A7745_CLK_HP),
+ DEF_MOD("i2c2", 929, R8A7745_CLK_HP),
+ DEF_MOD("i2c1", 930, R8A7745_CLK_HP),
+ DEF_MOD("i2c0", 931, R8A7745_CLK_HP),
+ DEF_MOD("ssi-all", 1005, R8A7745_CLK_P),
+ DEF_MOD("ssi9", 1006, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi8", 1007, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi7", 1008, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi6", 1009, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi5", 1010, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi4", 1011, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi3", 1012, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
+ DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
+ DEF_MOD("scu-all", 1017, R8A7745_CLK_P),
+ DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu1-mix1", 1020, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-ctu0-mix0", 1021, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src9", 1022, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src8", 1023, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src7", 1024, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src6", 1025, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src5", 1026, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src4", 1027, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src3", 1028, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src2", 1029, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src1", 1030, MOD_CLK_ID(1017)),
+ DEF_MOD("scu-src0", 1031, MOD_CLK_ID(1017)),
+ DEF_MOD("scifa3", 1106, R8A7745_CLK_MP),
+ DEF_MOD("scifa4", 1107, R8A7745_CLK_MP),
+ DEF_MOD("scifa5", 1108, R8A7745_CLK_MP),
+};
+
+static const unsigned int r8a7745_crit_mod_clks[] __initconst = {
+ MOD_CLK_ID(408), /* INTC-SYS (GIC) */
+};
+
+/*
+ * CPG Clock Data
+ */
+
+/*
+ * MD EXTAL PLL0 PLL1 PLL3
+ * 14 13 19 (MHz) *1 *2
+ *---------------------------------------------------
+ * 0 0 0 15 x200/3 x208/2 x106
+ * 0 0 1 15 x200/3 x208/2 x88
+ * 0 1 0 20 x150/3 x156/2 x80
+ * 0 1 1 20 x150/3 x156/2 x66
+ * 1 0 0 26 / 2 x230/3 x240/2 x122
+ * 1 0 1 26 / 2 x230/3 x240/2 x102
+ * 1 1 0 30 / 2 x200/3 x208/2 x106
+ * 1 1 1 30 / 2 x200/3 x208/2 x88
+ *
+ * *1 : Table 7.5b indicates VCO output (PLL0 = VCO/3)
+ * *2 : Table 7.5b indicates VCO output (PLL1 = VCO/2)
+ */
+#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
+ (((md) & BIT(13)) >> 12) | \
+ (((md) & BIT(19)) >> 19))
+
+static const struct rcar_gen2_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult PLL0 mult */
+ { 1, 208, 106, 200 },
+ { 1, 208, 88, 200 },
+ { 1, 156, 80, 150 },
+ { 1, 156, 66, 150 },
+ { 2, 240, 122, 230 },
+ { 2, 240, 102, 230 },
+ { 2, 208, 106, 200 },
+ { 2, 208, 88, 200 },
+};
+
+static int __init r8a7745_cpg_mssr_init(struct device *dev)
+{
+ const struct rcar_gen2_cpg_pll_config *cpg_pll_config;
+ u32 cpg_mode;
+ int error;
+
+ error = rcar_rst_read_mode_pins(&cpg_mode);
+ if (error)
+ return error;
+
+ cpg_pll_config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)];
+
+ return rcar_gen2_cpg_init(cpg_pll_config, 3);
+}
+
+const struct cpg_mssr_info r8a7745_cpg_mssr_info __initconst = {
+ /* Core Clocks */
+ .core_clks = r8a7745_core_clks,
+ .num_core_clks = ARRAY_SIZE(r8a7745_core_clks),
+ .last_dt_core_clk = LAST_DT_CORE_CLK,
+ .num_total_core_clks = MOD_CLK_BASE,
+
+ /* Module Clocks */
+ .mod_clks = r8a7745_mod_clks,
+ .num_mod_clks = ARRAY_SIZE(r8a7745_mod_clks),
+ .num_hw_mod_clks = 12 * 32,
+
+ /* Critical Module Clocks */
+ .crit_mod_clks = r8a7745_crit_mod_clks,
+ .num_crit_mod_clks = ARRAY_SIZE(r8a7745_crit_mod_clks),
+
+ /* Callbacks */
+ .init = r8a7745_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen2_cpg_clk_register,
+};
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.c
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.c
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -509,6 +509,12 @@ static const struct of_device_id cpg_mss
.data = &r8a7743_cpg_mssr_info,
},
#endif
+#ifdef CONFIG_ARCH_R8A7745
+ {
+ .compatible = "renesas,r8a7745-cpg-mssr",
+ .data = &r8a7745_cpg_mssr_info,
+ },
+#endif
#ifdef CONFIG_ARCH_R8A7795
{
.compatible = "renesas,r8a7795-cpg-mssr",
Index: linux/drivers/clk/renesas/renesas-cpg-mssr.h
===================================================================
--- linux.orig/drivers/clk/renesas/renesas-cpg-mssr.h
+++ linux/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -131,6 +131,7 @@ struct cpg_mssr_info {
};
extern const struct cpg_mssr_info r8a7743_cpg_mssr_info;
+extern const struct cpg_mssr_info r8a7745_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7795_cpg_mssr_info;
extern const struct cpg_mssr_info r8a7796_cpg_mssr_info;
#endif
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4] clk: renesas: cpg-mssr: add R8A7745 support
2016-11-08 21:25 ` [PATCH v4] " Sergei Shtylyov
@ 2016-11-10 12:53 ` Geert Uytterhoeven
0 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2016-11-10 12:53 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Michael Turquette, linux-clk, Stephen Boyd, Rob Herring,
Mark Rutland, devicetree, Linux-Renesas, Simon Horman
On Tue, Nov 8, 2016 at 10:25 PM, Sergei Shtylyov
<sergei.shtylyov@cogentembedded.com> wrote:
> Add RZ/G1E (R8A7745) Clock Pulse Generator / Module Standby and Software
> Reset support, using the CPG/MSSR driver core and the common R-Car Gen2
> (and RZ/G) code.
>
> Based on the proof-of-concept R8A7791 CPG/MSSR patch by Geert Uytterhoeven
> <geert+renesas@glider.be>.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> ---
> This patch is against the 'clk-next' branch of CLK group's 'linux.git' repo
> plus the R8A7743 clock driver patch. It depends on the common R-Car gen2 (and
> RZ/G) support just posted.
>
> Changes in version 4:
> - changed the Z2 clock's divisor to 1;
> - passed the PLL0 divisor to rcar_gen2_cpg_init();
> - renamed the ACP clock to CPEX;
> - removed the thermal module clock.
Thanks!
Will queue with the following trivial changes:
- pass cpg_mode to rcar_gen2_cpg_init(),
- sort clock names in DT bindings,
- reformat tables for easier comparison with other clock drivers.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-11-10 12:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-05 22:28 [PATCH v3 0/2] Renesas R8A7745 CPG/MSSR clock support Sergei Shtylyov
2016-11-05 22:31 ` [PATCH v3 1/2] ARM: shmobile: r8a7745: add CPG clock index macros Sergei Shtylyov
2016-11-07 8:34 ` Geert Uytterhoeven
2016-11-07 18:41 ` Geert Uytterhoeven
2016-11-05 22:34 ` [PATCH v3 2/2] clk: renesas: cpg-mssr: add R8A7745 support Sergei Shtylyov
2016-11-07 8:41 ` Geert Uytterhoeven
2016-11-08 21:25 ` [PATCH v4] " Sergei Shtylyov
2016-11-10 12:53 ` Geert Uytterhoeven
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.