* [PATCH 0/2] arm64: dts: r8a779[56]: update register size for thermal
@ 2018-01-04 21:31 Niklas Söderlund
[not found] ` <20180104213108.24080-1-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
0 siblings, 1 reply; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-04 21:31 UTC (permalink / raw)
To: devicetree, Simon Horman, Magnus Damm
Cc: linux-renesas-soc, Niklas Söderlund
Hi,
This series updates the register size for the thermal hardware. In later
versions of the datasheet one additional register is documented. This
register is needed to be able to determine if calibration data should be
read from register or if static values from the driver should be used.
There is already a posted RFC patch which make use of this additional
register (THSCP) if the register size described in DT covers it.
Currently no hardware where the calibration value is fused have been
found so that patch is not tested and therefore kept back until such a
system is found. In the mean time there is no harm in getting the
correct register size described in DT now that it's documented in the
datasheet (Rev 0.80).
Niklas Söderlund (2):
arm64: dts: r8a7795: update register size for thermal
arm64: dts: r8a7796: update register size for thermal
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--
2.15.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
2018-01-04 21:31 [PATCH 0/2] arm64: dts: r8a779[56]: update register size for thermal Niklas Söderlund
@ 2018-01-04 21:31 ` Niklas Söderlund
0 siblings, 0 replies; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-04 21:31 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA, Simon Horman, Magnus Damm
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Niklas Söderlund
To be able to read fused calibration values from hardware the size of
the register resource of TSC1 needs to be incremented to cover one more
register which holds the information if the calibration values have been
fused or not.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 19b7de57704c67e8..1214a5e777596a3c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -2385,7 +2385,7 @@
tsc: thermal@e6198000 {
compatible = "renesas,r8a7795-thermal";
- reg = <0 0xe6198000 0 0x68>,
+ reg = <0 0xe6198000 0 0x6c>,
<0 0xe61a0000 0 0x5c>,
<0 0xe61a8000 0 0x5c>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
@ 2018-01-04 21:31 ` Niklas Söderlund
0 siblings, 0 replies; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-04 21:31 UTC (permalink / raw)
To: devicetree, Simon Horman, Magnus Damm
Cc: linux-renesas-soc, Niklas Söderlund
To be able to read fused calibration values from hardware the size of
the register resource of TSC1 needs to be incremented to cover one more
register which holds the information if the calibration values have been
fused or not.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 19b7de57704c67e8..1214a5e777596a3c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -2385,7 +2385,7 @@
tsc: thermal@e6198000 {
compatible = "renesas,r8a7795-thermal";
- reg = <0 0xe6198000 0 0x68>,
+ reg = <0 0xe6198000 0 0x6c>,
<0 0xe61a0000 0 0x5c>,
<0 0xe61a8000 0 0x5c>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
--
2.15.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: dts: r8a7796: update register size for thermal
2018-01-04 21:31 [PATCH 0/2] arm64: dts: r8a779[56]: update register size for thermal Niklas Söderlund
@ 2018-01-04 21:31 ` Niklas Söderlund
0 siblings, 0 replies; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-04 21:31 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA, Simon Horman, Magnus Damm
Cc: linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA, Niklas Söderlund
To be able to read fused calibration values from hardware the size of
the register resource of TSC1 needs to be incremented to cover one more
register which holds the information if the calibration values have been
fused or not.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index ef10fb548681d36a..990ea798dbf6995d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1625,7 +1625,7 @@
tsc: thermal@e6198000 {
compatible = "renesas,r8a7796-thermal";
- reg = <0 0xe6198000 0 0x68>,
+ reg = <0 0xe6198000 0 0x6c>,
<0 0xe61a0000 0 0x5c>,
<0 0xe61a8000 0 0x5c>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/2] arm64: dts: r8a7796: update register size for thermal
@ 2018-01-04 21:31 ` Niklas Söderlund
0 siblings, 0 replies; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-04 21:31 UTC (permalink / raw)
To: devicetree, Simon Horman, Magnus Damm
Cc: linux-renesas-soc, Niklas Söderlund
To be able to read fused calibration values from hardware the size of
the register resource of TSC1 needs to be incremented to cover one more
register which holds the information if the calibration values have been
fused or not.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index ef10fb548681d36a..990ea798dbf6995d 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -1625,7 +1625,7 @@
tsc: thermal@e6198000 {
compatible = "renesas,r8a7796-thermal";
- reg = <0 0xe6198000 0 0x68>,
+ reg = <0 0xe6198000 0 0x6c>,
<0 0xe61a0000 0 0x5c>,
<0 0xe61a8000 0 0x5c>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
--
2.15.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
2018-01-04 21:31 ` Niklas Söderlund
@ 2018-01-05 8:47 ` Geert Uytterhoeven
-1 siblings, 0 replies; 12+ messages in thread
From: Geert Uytterhoeven @ 2018-01-05 8:47 UTC (permalink / raw)
To: Niklas Söderlund
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Simon Horman, Magnus Damm,
Linux-Renesas
On Thu, Jan 4, 2018 at 10:31 PM, Niklas Söderlund
<niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org> wrote:
> To be able to read fused calibration values from hardware the size of
> the register resource of TSC1 needs to be incremented to cover one more
> register which holds the information if the calibration values have been
> fused or not.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -2385,7 +2385,7 @@
>
> tsc: thermal@e6198000 {
> compatible = "renesas,r8a7795-thermal";
> - reg = <0 0xe6198000 0 0x68>,
> + reg = <0 0xe6198000 0 0x6c>,
Perhaps we should just make it 0x100?
I'd be very surprised if that would be smaller than the granularity of the
address decoder circuitry.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
@ 2018-01-05 8:47 ` Geert Uytterhoeven
0 siblings, 0 replies; 12+ messages in thread
From: Geert Uytterhoeven @ 2018-01-05 8:47 UTC (permalink / raw)
To: Niklas Söderlund
Cc: devicetree, Simon Horman, Magnus Damm, Linux-Renesas
On Thu, Jan 4, 2018 at 10:31 PM, Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> To be able to read fused calibration values from hardware the size of
> the register resource of TSC1 needs to be incremented to cover one more
> register which holds the information if the calibration values have been
> fused or not.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -2385,7 +2385,7 @@
>
> tsc: thermal@e6198000 {
> compatible = "renesas,r8a7795-thermal";
> - reg = <0 0xe6198000 0 0x68>,
> + reg = <0 0xe6198000 0 0x6c>,
Perhaps we should just make it 0x100?
I'd be very surprised if that would be smaller than the granularity of the
address decoder circuitry.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: dts: r8a7796: update register size for thermal
2018-01-04 21:31 ` Niklas Söderlund
@ 2018-01-05 8:47 ` Geert Uytterhoeven
-1 siblings, 0 replies; 12+ messages in thread
From: Geert Uytterhoeven @ 2018-01-05 8:47 UTC (permalink / raw)
To: Niklas Söderlund
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Simon Horman, Magnus Damm,
Linux-Renesas
On Thu, Jan 4, 2018 at 10:31 PM, Niklas Söderlund
<niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org> wrote:
> To be able to read fused calibration values from hardware the size of
> the register resource of TSC1 needs to be incremented to cover one more
> register which holds the information if the calibration values have been
> fused or not.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] arm64: dts: r8a7796: update register size for thermal
@ 2018-01-05 8:47 ` Geert Uytterhoeven
0 siblings, 0 replies; 12+ messages in thread
From: Geert Uytterhoeven @ 2018-01-05 8:47 UTC (permalink / raw)
To: Niklas Söderlund
Cc: devicetree, Simon Horman, Magnus Damm, Linux-Renesas
On Thu, Jan 4, 2018 at 10:31 PM, Niklas Söderlund
<niklas.soderlund+renesas@ragnatech.se> wrote:
> To be able to read fused calibration values from hardware the size of
> the register resource of TSC1 needs to be incremented to cover one more
> register which holds the information if the calibration values have been
> fused or not.
>
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
2018-01-05 8:47 ` Geert Uytterhoeven
@ 2018-01-05 12:24 ` Niklas Söderlund
-1 siblings, 0 replies; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-05 12:24 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Simon Horman, Magnus Damm,
Linux-Renesas
Hi Geert,
Thanks for your comments.
On 2018-01-05 09:47:11 +0100, Geert Uytterhoeven wrote:
> On Thu, Jan 4, 2018 at 10:31 PM, Niklas Söderlund
> <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org> wrote:
> > To be able to read fused calibration values from hardware the size of
> > the register resource of TSC1 needs to be incremented to cover one more
> > register which holds the information if the calibration values have been
> > fused or not.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
>
> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > @@ -2385,7 +2385,7 @@
> >
> > tsc: thermal@e6198000 {
> > compatible = "renesas,r8a7795-thermal";
> > - reg = <0 0xe6198000 0 0x68>,
> > + reg = <0 0xe6198000 0 0x6c>,
>
> Perhaps we should just make it 0x100?
> I'd be very surprised if that would be smaller than the granularity of the
> address decoder circuitry.
I have no problem with making it 0x100, looking at r8a7795.dtsi it seems
we are mixing what we do today. For example the i2c nodes are defined
with a precise size less then 0x100 while the USB-DMAC nodes uses a size
of 0x100 while the size in the documentation is less then 0x100. Maybe
we should define how we should handle cases like this and update the
existing DT files?
Do you think I should make all thermal registers 0x100 and not just TSC1
and resend?
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
--
Regards,
Niklas Söderlund
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
@ 2018-01-05 12:24 ` Niklas Söderlund
0 siblings, 0 replies; 12+ messages in thread
From: Niklas Söderlund @ 2018-01-05 12:24 UTC (permalink / raw)
To: Geert Uytterhoeven; +Cc: devicetree, Simon Horman, Magnus Damm, Linux-Renesas
Hi Geert,
Thanks for your comments.
On 2018-01-05 09:47:11 +0100, Geert Uytterhoeven wrote:
> On Thu, Jan 4, 2018 at 10:31 PM, Niklas S�derlund
> <niklas.soderlund+renesas@ragnatech.se> wrote:
> > To be able to read fused calibration values from hardware the size of
> > the register resource of TSC1 needs to be incremented to cover one more
> > register which holds the information if the calibration values have been
> > fused or not.
> >
> > Signed-off-by: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>
> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> > @@ -2385,7 +2385,7 @@
> >
> > tsc: thermal@e6198000 {
> > compatible = "renesas,r8a7795-thermal";
> > - reg = <0 0xe6198000 0 0x68>,
> > + reg = <0 0xe6198000 0 0x6c>,
>
> Perhaps we should just make it 0x100?
> I'd be very surprised if that would be smaller than the granularity of the
> address decoder circuitry.
I have no problem with making it 0x100, looking at r8a7795.dtsi it seems
we are mixing what we do today. For example the i2c nodes are defined
with a precise size less then 0x100 while the USB-DMAC nodes uses a size
of 0x100 while the size in the documentation is less then 0x100. Maybe
we should define how we should handle cases like this and update the
existing DT files?
Do you think I should make all thermal registers 0x100 and not just TSC1
and resend?
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
--
Regards,
Niklas S�derlund
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] arm64: dts: r8a7795: update register size for thermal
2018-01-05 12:24 ` Niklas Söderlund
(?)
@ 2018-01-05 12:33 ` Geert Uytterhoeven
-1 siblings, 0 replies; 12+ messages in thread
From: Geert Uytterhoeven @ 2018-01-05 12:33 UTC (permalink / raw)
To: Niklas Söderlund
Cc: devicetree, Simon Horman, Magnus Damm, Linux-Renesas
Hi Niklas,
On Fri, Jan 5, 2018 at 1:24 PM, Niklas Söderlund
<niklas.soderlund@ragnatech.se> wrote:
> On 2018-01-05 09:47:11 +0100, Geert Uytterhoeven wrote:
>> On Thu, Jan 4, 2018 at 10:31 PM, Niklas Söderlund
>> <niklas.soderlund+renesas@ragnatech.se> wrote:
>> > To be able to read fused calibration values from hardware the size of
>> > the register resource of TSC1 needs to be incremented to cover one more
>> > register which holds the information if the calibration values have been
>> > fused or not.
>> >
>> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>>
>> > --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>> > +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
>> > @@ -2385,7 +2385,7 @@
>> >
>> > tsc: thermal@e6198000 {
>> > compatible = "renesas,r8a7795-thermal";
>> > - reg = <0 0xe6198000 0 0x68>,
>> > + reg = <0 0xe6198000 0 0x6c>,
>>
>> Perhaps we should just make it 0x100?
>> I'd be very surprised if that would be smaller than the granularity of the
>> address decoder circuitry.
>
> I have no problem with making it 0x100, looking at r8a7795.dtsi it seems
> we are mixing what we do today. For example the i2c nodes are defined
> with a precise size less then 0x100 while the USB-DMAC nodes uses a size
> of 0x100 while the size in the documentation is less then 0x100. Maybe
> we should define how we should handle cases like this and update the
> existing DT files?
>
> Do you think I should make all thermal registers 0x100 and not just TSC1
> and resend?
I think that makes sense.
Granularities below PAGE_SIZE can't be enforced well anyway
(Hi, gpio5/6/7 virtualization!).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2018-01-05 12:33 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-04 21:31 [PATCH 0/2] arm64: dts: r8a779[56]: update register size for thermal Niklas Söderlund
[not found] ` <20180104213108.24080-1-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2018-01-04 21:31 ` [PATCH 1/2] arm64: dts: r8a7795: " Niklas Söderlund
2018-01-04 21:31 ` Niklas Söderlund
[not found] ` <20180104213108.24080-2-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2018-01-05 8:47 ` Geert Uytterhoeven
2018-01-05 8:47 ` Geert Uytterhoeven
[not found] ` <CAMuHMdU97udtf4+vo_SaGyYaEk1eV4QEmeqWiGF4iVp045w=6A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-01-05 12:24 ` Niklas Söderlund
2018-01-05 12:24 ` Niklas Söderlund
2018-01-05 12:33 ` Geert Uytterhoeven
2018-01-04 21:31 ` [PATCH 2/2] arm64: dts: r8a7796: " Niklas Söderlund
2018-01-04 21:31 ` Niklas Söderlund
[not found] ` <20180104213108.24080-3-niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
2018-01-05 8:47 ` Geert Uytterhoeven
2018-01-05 8:47 ` Geert Uytterhoeven
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.