[PATCH v3 1/2] usb: host: plat: Enable xhci plat runtime PM

[PATCH v3 1/2] usb: host: plat: Enable xhci plat runtime PM

[Baolin Wang]

Enable the xhci plat runtime PM for parent device to suspend/resume xhci.
Also call pm_runtime_get_noresume() in probe() function in case the parent
device doesn't call suspend/resume callback by runtime PM now.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes since v2:
 - Add pm_runtime_get_noresume() in probe() function.
 - Add pm_runtime_set_suspended()/pm_runtime_put_noidle() in remove() function.

Changes since v1:
 - No updates.
---
 drivers/usb/host/xhci-plat.c |   41 ++++++++++++++++++++++++++++++++++++-----
 1 file changed, 36 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ed56bf9..f174502 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -246,6 +246,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (ret)
 		goto dealloc_usb2_hcd;
 
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	return 0;
 
 
@@ -274,6 +278,10 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;
 
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_disable(&dev->dev);
+
 	usb_remove_hcd(xhci->shared_hcd);
 	usb_phy_shutdown(hcd->usb_phy);
 
@@ -311,14 +319,37 @@ static int xhci_plat_resume(struct device *dev)
 
 	return xhci_resume(xhci, 0);
 }
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int xhci_plat_runtime_suspend(struct device *dev)
+{
+	struct usb_hcd  *hcd = dev_get_drvdata(dev);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	return xhci_suspend(xhci, device_may_wakeup(dev));
+}
+
+static int xhci_plat_runtime_resume(struct device *dev)
+{
+	struct usb_hcd  *hcd = dev_get_drvdata(dev);
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+	return xhci_resume(xhci, 0);
+}
+
+static int xhci_plat_runtime_idle(struct device *dev)
+{
+	return 0;
+}
+#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops xhci_plat_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
+
+	SET_RUNTIME_PM_OPS(xhci_plat_runtime_suspend, xhci_plat_runtime_resume,
+			   xhci_plat_runtime_idle)
 };
-#define DEV_PM_OPS	(&xhci_plat_pm_ops)
-#else
-#define DEV_PM_OPS	NULL
-#endif /* CONFIG_PM */
 
 static const struct acpi_device_id usb_xhci_acpi_match[] = {
 	/* XHCI-compliant USB Controller */
@@ -332,7 +363,7 @@ static int xhci_plat_resume(struct device *dev)
 	.remove	= xhci_plat_remove,
 	.driver	= {
 		.name = "xhci-hcd",
-		.pm = DEV_PM_OPS,
+		.pm = &xhci_plat_pm_ops,
 		.of_match_table = of_match_ptr(usb_xhci_of_match),
 		.acpi_match_table = ACPI_PTR(usb_xhci_acpi_match),
 	},
-- 
1.7.9.5

[PATCH v3 2/2] usb: dwc3: core: Support the dwc3 host suspend/resume

[Baolin Wang]

For some mobile devices with strict power management, we also want to suspend
the host when the slave is detached for power saving. Thus we add the host
suspend/resume functions to support this requirement.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes since v2:
 - Remove pm_children_suspended() and other unused macros.

Changes since v1:
  - Add pm_runtime.h head file to avoid kbuild error.
---
 drivers/usb/dwc3/Kconfig |    7 +++++++
 drivers/usb/dwc3/core.c  |   26 +++++++++++++++++++++++++-
 drivers/usb/dwc3/core.h  |   15 +++++++++++++++
 drivers/usb/dwc3/host.c  |   37 +++++++++++++++++++++++++++++++++++++
 4 files changed, 84 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index a45b4f1..47bb2f3 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -47,6 +47,13 @@ config USB_DWC3_DUAL_ROLE
 
 endchoice
 
+config USB_DWC3_HOST_SUSPEND
+	bool "Choose if the DWC3 host (xhci) can be suspend/resume"
+	depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y
+	help
+	  We can suspend the host when the slave is detached for power saving,
+	  and resume the host when one slave is attached.
+
 comment "Platform Glue Driver Support"
 
 config USB_DWC3_OMAP
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9a4a5e4..7ad4bc3 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1091,6 +1091,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
 	pm_runtime_enable(dev);
+	pm_suspend_ignore_children(dev, true);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
 		goto err1;
@@ -1215,15 +1216,27 @@ static int dwc3_remove(struct platform_device *pdev)
 static int dwc3_suspend_common(struct dwc3 *dwc)
 {
 	unsigned long	flags;
+	int		ret;
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_gadget_suspend(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		break;
 	case USB_DR_MODE_OTG:
+		ret = dwc3_host_suspend(dwc);
+		if (ret)
+			return ret;
+
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
 		break;
 	case USB_DR_MODE_HOST:
+		ret = dwc3_host_suspend(dwc);
+		if (ret)
+			return ret;
 	default:
 		/* do nothing */
 		break;
@@ -1245,12 +1258,23 @@ static int dwc3_resume_common(struct dwc3 *dwc)
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_gadget_resume(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		break;
 	case USB_DR_MODE_OTG:
+		ret = dwc3_host_resume(dwc);
+		if (ret)
+			return ret;
+
 		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_resume(dwc);
 		spin_unlock_irqrestore(&dwc->lock, flags);
-		/* FALLTHROUGH */
+		break;
 	case USB_DR_MODE_HOST:
+		ret = dwc3_host_resume(dwc);
+		if (ret)
+			return ret;
 	default:
 		/* do nothing */
 		break;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b585a30..db41908 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1226,4 +1226,19 @@ static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
 { }
 #endif
 
+#if IS_ENABLED(CONFIG_USB_DWC3_HOST_SUSPEND)
+int dwc3_host_suspend(struct dwc3 *dwc);
+int dwc3_host_resume(struct dwc3 *dwc);
+#else
+static inline int dwc3_host_suspend(struct dwc3 *dwc)
+{
+	return 0;
+}
+
+static inline int dwc3_host_resume(struct dwc3 *dwc)
+{
+	return 0;
+}
+#endif
+
 #endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index ed82464..8e5309d6 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -16,6 +16,7 @@
  */
 
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 #include "core.h"
 
@@ -130,3 +131,39 @@ void dwc3_host_exit(struct dwc3 *dwc)
 			  dev_name(&dwc->xhci->dev));
 	platform_device_unregister(dwc->xhci);
 }
+
+#ifdef CONFIG_USB_DWC3_HOST_SUSPEND
+int dwc3_host_suspend(struct dwc3 *dwc)
+{
+	struct device *xhci = &dwc->xhci->dev;
+	int ret;
+
+	/*
+	 * Note: if we get the -EBUSY, which means the xHCI children devices are
+	 * not in suspend state yet, the glue layer need to wait for a while and
+	 * try to suspend xHCI device again.
+	 */
+	ret = pm_runtime_put_sync(xhci);
+	if (ret) {
+		dev_err(xhci, "failed to suspend xHCI device\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int dwc3_host_resume(struct dwc3 *dwc)
+{
+	struct device *xhci = &dwc->xhci->dev;
+	int ret;
+
+	/* Resume the xHCI device synchronously. */
+	ret = pm_runtime_get_sync(xhci);
+	if (ret) {
+		dev_err(xhci, "failed to resume xHCI device\n");
+		return ret;
+	}
+
+	return 0;
+}
+#endif
-- 
1.7.9.5

Re: [PATCH v3 1/2] usb: host: plat: Enable xhci plat runtime PM

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1532 bytes --]

Hi Baolin,

[auto build test ERROR on v4.9-rc6]
[also build test ERROR on next-20161123]
[cannot apply to balbi-usb/next usb/usb-testing]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/usb-host-plat-Enable-xhci-plat-runtime-PM/20161124-012323
config: x86_64-randconfig-x008-201647 (attached as .config)
compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
reproduce:
        # save the attached .config to linux build tree
        make ARCH=x86_64 

All errors (new ones prefixed by >>):

   drivers/usb/host/xhci-plat.c: In function 'xhci_plat_remove':
>> drivers/usb/host/xhci-plat.c:281:28: error: 'pdev' undeclared (first use in this function)
     pm_runtime_set_suspended(&pdev->dev);
                               ^~~~
   drivers/usb/host/xhci-plat.c:281:28: note: each undeclared identifier is reported only once for each function it appears in

vim +/pdev +281 drivers/usb/host/xhci-plat.c

   275	static int xhci_plat_remove(struct platform_device *dev)
   276	{
   277		struct usb_hcd	*hcd = platform_get_drvdata(dev);
   278		struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
   279		struct clk *clk = xhci->clk;
   280	
 > 281		pm_runtime_set_suspended(&pdev->dev);
   282		pm_runtime_put_noidle(&pdev->dev);
   283		pm_runtime_disable(&dev->dev);
   284	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 23938 bytes --]

Re: [PATCH v3 1/2] usb: host: plat: Enable xhci plat runtime PM

[Baolin Wang]

On 24 November 2016 at 01:39, kbuild test robot <lkp@intel.com> wrote:
> Hi Baolin,
>
> [auto build test ERROR on v4.9-rc6]
> [also build test ERROR on next-20161123]
> [cannot apply to balbi-usb/next usb/usb-testing]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/usb-host-plat-Enable-xhci-plat-runtime-PM/20161124-012323
> config: x86_64-randconfig-x008-201647 (attached as .config)
> compiler: gcc-6 (Debian 6.2.0-3) 6.2.0 20160901
> reproduce:
>         # save the attached .config to linux build tree
>         make ARCH=x86_64
>
> All errors (new ones prefixed by >>):
>
>    drivers/usb/host/xhci-plat.c: In function 'xhci_plat_remove':
>>> drivers/usb/host/xhci-plat.c:281:28: error: 'pdev' undeclared (first use in this function)
>      pm_runtime_set_suspended(&pdev->dev);

Oops, will fix my mistake in new patch. Please ignore this patch. Sorry.

-- 
Baolin.wang
Best Regards