* [PATCH] power: max8925. remove support for irq bits that do not exist
@ 2011-08-26 22:27 Philip Rakity
2011-08-26 23:16 ` Haojian Zhuang
0 siblings, 1 reply; 4+ messages in thread
From: Philip Rakity @ 2011-08-26 22:27 UTC (permalink / raw)
To: linux-kernel, Haojian Zhuang
The max8925 cannot return usb status. The bits
- [MAX8925_IRQ_VCHG_USB_OVP] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 3,
- },
- [MAX8925_IRQ_VCHG_USB_F] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 4,
- },
- [MAX8925_IRQ_VCHG_USB_R] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 5,
- },
do not exist in the irq register.
Signed-off-by: Philip Rakity <prakity@marvell.com>
---
drivers/mfd/max8925-core.c | 15 ---------------
drivers/power/max8925_power.c | 13 -------------
include/linux/mfd/max8925.h | 3 ---
3 files changed, 0 insertions(+), 31 deletions(-)
diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
index e1e59c9..ca881ef 100644
--- a/drivers/mfd/max8925-core.c
+++ b/drivers/mfd/max8925-core.c
@@ -210,21 +210,6 @@ static struct max8925_irq_data max8925_irqs[] = {
.mask_reg = MAX8925_CHG_IRQ1_MASK,
.offs = 1 << 2,
},
- [MAX8925_IRQ_VCHG_USB_OVP] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 3,
- },
- [MAX8925_IRQ_VCHG_USB_F] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 4,
- },
- [MAX8925_IRQ_VCHG_USB_R] = {
- .reg = MAX8925_CHG_IRQ1,
- .mask_reg = MAX8925_CHG_IRQ1_MASK,
- .offs = 1 << 5,
- },
[MAX8925_IRQ_VCHG_THM_OK_R] = {
.reg = MAX8925_CHG_IRQ2,
.mask_reg = MAX8925_CHG_IRQ2_MASK,
diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
index 5e4e046..377d1e6 100644
--- a/drivers/power/max8925_power.c
+++ b/drivers/power/max8925_power.c
@@ -120,16 +120,6 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
__set_charger(info, 0);
dev_dbg(chip->dev, "Adapter removed\n");
break;
- case MAX8925_IRQ_VCHG_USB_R:
- info->usb_online = 1;
- __set_charger(info, 1);
- dev_dbg(chip->dev, "USB inserted\n");
- break;
- case MAX8925_IRQ_VCHG_USB_F:
- info->usb_online = 0;
- __set_charger(info, 0);
- dev_dbg(chip->dev, "USB removed\n");
- break;
case MAX8925_IRQ_VCHG_THM_OK_F:
/* Battery is not ready yet */
dev_dbg(chip->dev, "Battery temperature is out of range\n");
@@ -370,9 +360,6 @@ static __devinit int max8925_init_charger(struct max8925_chip *chip,
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
}
- REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
- REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
- REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
if (!info->no_temp_support) {
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
diff --git a/include/linux/mfd/max8925.h b/include/linux/mfd/max8925.h
index 008f807..b8e6d94 100644
--- a/include/linux/mfd/max8925.h
+++ b/include/linux/mfd/max8925.h
@@ -167,9 +167,6 @@ enum {
MAX8925_IRQ_VCHG_DC_OVP,
MAX8925_IRQ_VCHG_DC_F,
MAX8925_IRQ_VCHG_DC_R,
- MAX8925_IRQ_VCHG_USB_OVP,
- MAX8925_IRQ_VCHG_USB_F,
- MAX8925_IRQ_VCHG_USB_R,
MAX8925_IRQ_VCHG_THM_OK_R,
MAX8925_IRQ_VCHG_THM_OK_F,
MAX8925_IRQ_VCHG_SYSLOW_F,
--
1.7.6
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] power: max8925. remove support for irq bits that do not exist
2011-08-26 22:27 [PATCH] power: max8925. remove support for irq bits that do not exist Philip Rakity
@ 2011-08-26 23:16 ` Haojian Zhuang
2011-11-25 19:09 ` Anton Vorontsov
0 siblings, 1 reply; 4+ messages in thread
From: Haojian Zhuang @ 2011-08-26 23:16 UTC (permalink / raw)
To: Philip Rakity, cbou, David Woodhouse; +Cc: linux-kernel
On Sat, Aug 27, 2011 at 6:27 AM, Philip Rakity <prakity@marvell.com> wrote:
>
> The max8925 cannot return usb status. The bits
> - [MAX8925_IRQ_VCHG_USB_OVP] = {
> - .reg = MAX8925_CHG_IRQ1,
> - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> - .offs = 1 << 3,
> - },
> - [MAX8925_IRQ_VCHG_USB_F] = {
> - .reg = MAX8925_CHG_IRQ1,
> - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> - .offs = 1 << 4,
> - },
> - [MAX8925_IRQ_VCHG_USB_R] = {
> - .reg = MAX8925_CHG_IRQ1,
> - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> - .offs = 1 << 5,
> - },
>
> do not exist in the irq register.
>
> Signed-off-by: Philip Rakity <prakity@marvell.com>
> ---
> drivers/mfd/max8925-core.c | 15 ---------------
> drivers/power/max8925_power.c | 13 -------------
> include/linux/mfd/max8925.h | 3 ---
> 3 files changed, 0 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
> index e1e59c9..ca881ef 100644
> --- a/drivers/mfd/max8925-core.c
> +++ b/drivers/mfd/max8925-core.c
> @@ -210,21 +210,6 @@ static struct max8925_irq_data max8925_irqs[] = {
> .mask_reg = MAX8925_CHG_IRQ1_MASK,
> .offs = 1 << 2,
> },
> - [MAX8925_IRQ_VCHG_USB_OVP] = {
> - .reg = MAX8925_CHG_IRQ1,
> - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> - .offs = 1 << 3,
> - },
> - [MAX8925_IRQ_VCHG_USB_F] = {
> - .reg = MAX8925_CHG_IRQ1,
> - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> - .offs = 1 << 4,
> - },
> - [MAX8925_IRQ_VCHG_USB_R] = {
> - .reg = MAX8925_CHG_IRQ1,
> - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> - .offs = 1 << 5,
> - },
> [MAX8925_IRQ_VCHG_THM_OK_R] = {
> .reg = MAX8925_CHG_IRQ2,
> .mask_reg = MAX8925_CHG_IRQ2_MASK,
> diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
> index 5e4e046..377d1e6 100644
> --- a/drivers/power/max8925_power.c
> +++ b/drivers/power/max8925_power.c
> @@ -120,16 +120,6 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
> __set_charger(info, 0);
> dev_dbg(chip->dev, "Adapter removed\n");
> break;
> - case MAX8925_IRQ_VCHG_USB_R:
> - info->usb_online = 1;
> - __set_charger(info, 1);
> - dev_dbg(chip->dev, "USB inserted\n");
> - break;
> - case MAX8925_IRQ_VCHG_USB_F:
> - info->usb_online = 0;
> - __set_charger(info, 0);
> - dev_dbg(chip->dev, "USB removed\n");
> - break;
> case MAX8925_IRQ_VCHG_THM_OK_F:
> /* Battery is not ready yet */
> dev_dbg(chip->dev, "Battery temperature is out of range\n");
> @@ -370,9 +360,6 @@ static __devinit int max8925_init_charger(struct max8925_chip *chip,
> REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
> REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
> }
> - REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
> - REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
> - REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
> if (!info->no_temp_support) {
> REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
> REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
> diff --git a/include/linux/mfd/max8925.h b/include/linux/mfd/max8925.h
> index 008f807..b8e6d94 100644
> --- a/include/linux/mfd/max8925.h
> +++ b/include/linux/mfd/max8925.h
> @@ -167,9 +167,6 @@ enum {
> MAX8925_IRQ_VCHG_DC_OVP,
> MAX8925_IRQ_VCHG_DC_F,
> MAX8925_IRQ_VCHG_DC_R,
> - MAX8925_IRQ_VCHG_USB_OVP,
> - MAX8925_IRQ_VCHG_USB_F,
> - MAX8925_IRQ_VCHG_USB_R,
> MAX8925_IRQ_VCHG_THM_OK_R,
> MAX8925_IRQ_VCHG_THM_OK_F,
> MAX8925_IRQ_VCHG_SYSLOW_F,
> --
> 1.7.6
>
>
>
Loop maintainer
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] power: max8925. remove support for irq bits that do not exist
2011-08-26 23:16 ` Haojian Zhuang
@ 2011-11-25 19:09 ` Anton Vorontsov
2011-12-12 17:33 ` Samuel Ortiz
0 siblings, 1 reply; 4+ messages in thread
From: Anton Vorontsov @ 2011-11-25 19:09 UTC (permalink / raw)
To: Haojian Zhuang, Samuel Ortiz, Mark Brown
Cc: Philip Rakity, David Woodhouse, linux-kernel
MFD guys: OK to go through battery GIT tree?
On Sat, Aug 27, 2011 at 07:16:30AM +0800, Haojian Zhuang wrote:
> On Sat, Aug 27, 2011 at 6:27 AM, Philip Rakity <prakity@marvell.com> wrote:
> >
> > The max8925 cannot return usb status. The bits
> > - [MAX8925_IRQ_VCHG_USB_OVP] = {
> > - .reg = MAX8925_CHG_IRQ1,
> > - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > - .offs = 1 << 3,
> > - },
> > - [MAX8925_IRQ_VCHG_USB_F] = {
> > - .reg = MAX8925_CHG_IRQ1,
> > - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > - .offs = 1 << 4,
> > - },
> > - [MAX8925_IRQ_VCHG_USB_R] = {
> > - .reg = MAX8925_CHG_IRQ1,
> > - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > - .offs = 1 << 5,
> > - },
> >
> > do not exist in the irq register.
> >
> > Signed-off-by: Philip Rakity <prakity@marvell.com>
> > ---
> > drivers/mfd/max8925-core.c | 15 ---------------
> > drivers/power/max8925_power.c | 13 -------------
> > include/linux/mfd/max8925.h | 3 ---
> > 3 files changed, 0 insertions(+), 31 deletions(-)
> >
> > diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
> > index e1e59c9..ca881ef 100644
> > --- a/drivers/mfd/max8925-core.c
> > +++ b/drivers/mfd/max8925-core.c
> > @@ -210,21 +210,6 @@ static struct max8925_irq_data max8925_irqs[] = {
> > .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > .offs = 1 << 2,
> > },
> > - [MAX8925_IRQ_VCHG_USB_OVP] = {
> > - .reg = MAX8925_CHG_IRQ1,
> > - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > - .offs = 1 << 3,
> > - },
> > - [MAX8925_IRQ_VCHG_USB_F] = {
> > - .reg = MAX8925_CHG_IRQ1,
> > - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > - .offs = 1 << 4,
> > - },
> > - [MAX8925_IRQ_VCHG_USB_R] = {
> > - .reg = MAX8925_CHG_IRQ1,
> > - .mask_reg = MAX8925_CHG_IRQ1_MASK,
> > - .offs = 1 << 5,
> > - },
> > [MAX8925_IRQ_VCHG_THM_OK_R] = {
> > .reg = MAX8925_CHG_IRQ2,
> > .mask_reg = MAX8925_CHG_IRQ2_MASK,
> > diff --git a/drivers/power/max8925_power.c b/drivers/power/max8925_power.c
> > index 5e4e046..377d1e6 100644
> > --- a/drivers/power/max8925_power.c
> > +++ b/drivers/power/max8925_power.c
> > @@ -120,16 +120,6 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
> > __set_charger(info, 0);
> > dev_dbg(chip->dev, "Adapter removed\n");
> > break;
> > - case MAX8925_IRQ_VCHG_USB_R:
> > - info->usb_online = 1;
> > - __set_charger(info, 1);
> > - dev_dbg(chip->dev, "USB inserted\n");
> > - break;
> > - case MAX8925_IRQ_VCHG_USB_F:
> > - info->usb_online = 0;
> > - __set_charger(info, 0);
> > - dev_dbg(chip->dev, "USB removed\n");
> > - break;
> > case MAX8925_IRQ_VCHG_THM_OK_F:
> > /* Battery is not ready yet */
> > dev_dbg(chip->dev, "Battery temperature is out of range\n");
> > @@ -370,9 +360,6 @@ static __devinit int max8925_init_charger(struct max8925_chip *chip,
> > REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
> > REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
> > }
> > - REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
> > - REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
> > - REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
> > if (!info->no_temp_support) {
> > REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
> > REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
> > diff --git a/include/linux/mfd/max8925.h b/include/linux/mfd/max8925.h
> > index 008f807..b8e6d94 100644
> > --- a/include/linux/mfd/max8925.h
> > +++ b/include/linux/mfd/max8925.h
> > @@ -167,9 +167,6 @@ enum {
> > MAX8925_IRQ_VCHG_DC_OVP,
> > MAX8925_IRQ_VCHG_DC_F,
> > MAX8925_IRQ_VCHG_DC_R,
> > - MAX8925_IRQ_VCHG_USB_OVP,
> > - MAX8925_IRQ_VCHG_USB_F,
> > - MAX8925_IRQ_VCHG_USB_R,
> > MAX8925_IRQ_VCHG_THM_OK_R,
> > MAX8925_IRQ_VCHG_THM_OK_F,
> > MAX8925_IRQ_VCHG_SYSLOW_F,
> > --
> > 1.7.6
> >
> >
> >
>
> Loop maintainer
--
Anton Vorontsov
Email: cbouatmailru@gmail.com
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] power: max8925. remove support for irq bits that do not exist
2011-11-25 19:09 ` Anton Vorontsov
@ 2011-12-12 17:33 ` Samuel Ortiz
0 siblings, 0 replies; 4+ messages in thread
From: Samuel Ortiz @ 2011-12-12 17:33 UTC (permalink / raw)
To: Anton Vorontsov
Cc: Haojian Zhuang, Mark Brown, Philip Rakity, David Woodhouse, linux-kernel
Hi Anton,
On Fri, Nov 25, 2011 at 11:09:33PM +0400, Anton Vorontsov wrote:
> MFD guys: OK to go through battery GIT tree?
Yes.
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-12-12 17:28 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-26 22:27 [PATCH] power: max8925. remove support for irq bits that do not exist Philip Rakity
2011-08-26 23:16 ` Haojian Zhuang
2011-11-25 19:09 ` Anton Vorontsov
2011-12-12 17:33 ` Samuel Ortiz
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.