All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anand Moon <linux.amoon@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	devicetree <devicetree@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	"linux-samsung-soc@vger.kernel.org" 
	<linux-samsung-soc@vger.kernel.org>,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Peter Chen <peter.chen@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Mark Brown <broonie@kernel.org>,
	sre@kernel.org, Rob Herring <robh+dt@kernel.org>,
	Linux USB Mailing List <linux-usb@vger.kernel.org>,
	Linux PM list <linux-pm@vger.kernel.org>,
	hverkuil@xs4all.nl, Markus Reichl <m.reichl@fivetechno.de>
Subject: Re: [PATCH 0/4] ARM: exynos: Fix Odroid U3 USB/LAN when TFTP booting (power sequence)
Date: Mon, 9 Jan 2017 23:56:41 +0530	[thread overview]
Message-ID: <CANAwSgR7=cELNK9of5ngFTdhcxWn2KXL=R8tMsTKD7gecBcMYw@mail.gmail.com> (raw)
In-Reply-To: <20170109181703.436gv7bq76xuv35q@kozik-lap>

Hi Krzysztof,

On 9 January 2017 at 23:47, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Mon, Jan 09, 2017 at 11:34:48PM +0530, Anand Moon wrote:
>> Hi Krzysztof,
>>
>> On 7 January 2017 at 14:21, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>> > Hi,
>> >
>> > Thanks to Markus Reichl, I got an Odroid U3 to work with. Thanks to Peter
>> > Chen, we got a power sequence generic library which solves my long
>> > standing Odroid U3 problem - no LAN9730 if it was enabled by bootloader.
>> >
>> > My previous attempts for this can be found here [0].
>> >
>> > This patchset is based on Peter's v11 of power sequence [1].
>> > Patchset is available also on my Github [2].
>> >
>> > More detailed analysis is described in patch 2/4 ("ARM: dts: exynos: Fix
>> > LAN9730 on Odroid U3 after tftpboot").
>> >
>> >
>>
>> [snip]
>>
>> On which u-boot should this be tested.
>>
>> On HK u-boot tftp boot is not supported.
>
> ... so you gave an answer: you cannot test it on HK. How many other
> U-Boot flavors you know? :)
>

u-boot mainline have tftp support enable, so I will try to test on this u-boot.

Best Regards
-Anand

> Best regards,
> Krzysztof
>
>
>> ----------------------------------------------------------
>> U-Boot 2010.12-00000-g9777ca6-dirty (Nov 26 2015 - 10:10:11) for Exynox4412
>>
>>
>> CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
>> APLL = 1000MHz, MPLL = 800MHz
>> DRAM:  2 GiB
>>
>> PMIC VERSION : 0x00, CHIP REV : 2
>> TrustZone Enabled BSP
>> BL1 version: 20121128
>>
>>
>> Checking Boot Mode ... SDMMC
>> MMC Device 0: 14804 MB
>> MMC Device 1 not found
>> *** Warning - using default environment
>>
>> USB3503 NINT = OUTPUT LOW!
>> ModeKey Check... run normal_boot
>> No ethernet found.
>> Hit any key to stop autoboot:  0
>> Exynos4412 #
>> Exynos4412 #
>> Exynos4412 #
>> Exynos4412 # usb start
>> (Re)start USB...
>> USB0:   Exynos4412-ehci: init hccr 12580000 and hcor 12580010 hc_length 16
>> usb: usb_refclk_enable is active low: NO
>> ProTIP: If usb doesn't work - try playing with 'usb_invert_clken' environment
>> USB EHCI 1.00
>> scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
>> EHCI fail timeout STS_ASS set
>>
>>       USB device not accepting new address (error=80000000)
>> EHCI fail timeout STS_ASS set
>> 1 USB Device(s) found
>>        scanning usb for storage devices... 0 Storage Device(s) found
>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>> Exynos4412 #
>>
>> Best Regards
>> -Anand

WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	devicetree <devicetree@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	"linux-samsung-soc@vger.kernel.org"
	<linux-samsung-soc@vger.kernel.org>,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Peter Chen <peter.chen@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Mark Brown <broonie@kernel.org>,
	sre@kernel.org, Rob Herring <robh+dt@kernel.org>,
	Linux USB Mailing List <linux-usb@vger.kernel.org>,
	Linux PM list <linux-pm@vger.kernel.org>,
	hverkuil@xs4all.nl, Markus
Subject: Re: [PATCH 0/4] ARM: exynos: Fix Odroid U3 USB/LAN when TFTP booting (power sequence)
Date: Mon, 9 Jan 2017 23:56:41 +0530	[thread overview]
Message-ID: <CANAwSgR7=cELNK9of5ngFTdhcxWn2KXL=R8tMsTKD7gecBcMYw@mail.gmail.com> (raw)
In-Reply-To: <20170109181703.436gv7bq76xuv35q@kozik-lap>

Hi Krzysztof,

On 9 January 2017 at 23:47, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Mon, Jan 09, 2017 at 11:34:48PM +0530, Anand Moon wrote:
>> Hi Krzysztof,
>>
>> On 7 January 2017 at 14:21, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>> > Hi,
>> >
>> > Thanks to Markus Reichl, I got an Odroid U3 to work with. Thanks to Peter
>> > Chen, we got a power sequence generic library which solves my long
>> > standing Odroid U3 problem - no LAN9730 if it was enabled by bootloader.
>> >
>> > My previous attempts for this can be found here [0].
>> >
>> > This patchset is based on Peter's v11 of power sequence [1].
>> > Patchset is available also on my Github [2].
>> >
>> > More detailed analysis is described in patch 2/4 ("ARM: dts: exynos: Fix
>> > LAN9730 on Odroid U3 after tftpboot").
>> >
>> >
>>
>> [snip]
>>
>> On which u-boot should this be tested.
>>
>> On HK u-boot tftp boot is not supported.
>
> ... so you gave an answer: you cannot test it on HK. How many other
> U-Boot flavors you know? :)
>

u-boot mainline have tftp support enable, so I will try to test on this u-boot.

Best Regards
-Anand

> Best regards,
> Krzysztof
>
>
>> ----------------------------------------------------------
>> U-Boot 2010.12-00000-g9777ca6-dirty (Nov 26 2015 - 10:10:11) for Exynox4412
>>
>>
>> CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
>> APLL = 1000MHz, MPLL = 800MHz
>> DRAM:  2 GiB
>>
>> PMIC VERSION : 0x00, CHIP REV : 2
>> TrustZone Enabled BSP
>> BL1 version: 20121128
>>
>>
>> Checking Boot Mode ... SDMMC
>> MMC Device 0: 14804 MB
>> MMC Device 1 not found
>> *** Warning - using default environment
>>
>> USB3503 NINT = OUTPUT LOW!
>> ModeKey Check... run normal_boot
>> No ethernet found.
>> Hit any key to stop autoboot:  0
>> Exynos4412 #
>> Exynos4412 #
>> Exynos4412 #
>> Exynos4412 # usb start
>> (Re)start USB...
>> USB0:   Exynos4412-ehci: init hccr 12580000 and hcor 12580010 hc_length 16
>> usb: usb_refclk_enable is active low: NO
>> ProTIP: If usb doesn't work - try playing with 'usb_invert_clken' environment
>> USB EHCI 1.00
>> scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
>> EHCI fail timeout STS_ASS set
>>
>>       USB device not accepting new address (error=80000000)
>> EHCI fail timeout STS_ASS set
>> 1 USB Device(s) found
>>        scanning usb for storage devices... 0 Storage Device(s) found
>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>> Exynos4412 #
>>
>> Best Regards
>> -Anand

WARNING: multiple messages have this Message-ID (diff)
From: linux.amoon@gmail.com (Anand Moon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/4] ARM: exynos: Fix Odroid U3 USB/LAN when TFTP booting (power sequence)
Date: Mon, 9 Jan 2017 23:56:41 +0530	[thread overview]
Message-ID: <CANAwSgR7=cELNK9of5ngFTdhcxWn2KXL=R8tMsTKD7gecBcMYw@mail.gmail.com> (raw)
In-Reply-To: <20170109181703.436gv7bq76xuv35q@kozik-lap>

Hi Krzysztof,

On 9 January 2017 at 23:47, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Mon, Jan 09, 2017 at 11:34:48PM +0530, Anand Moon wrote:
>> Hi Krzysztof,
>>
>> On 7 January 2017 at 14:21, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>> > Hi,
>> >
>> > Thanks to Markus Reichl, I got an Odroid U3 to work with. Thanks to Peter
>> > Chen, we got a power sequence generic library which solves my long
>> > standing Odroid U3 problem - no LAN9730 if it was enabled by bootloader.
>> >
>> > My previous attempts for this can be found here [0].
>> >
>> > This patchset is based on Peter's v11 of power sequence [1].
>> > Patchset is available also on my Github [2].
>> >
>> > More detailed analysis is described in patch 2/4 ("ARM: dts: exynos: Fix
>> > LAN9730 on Odroid U3 after tftpboot").
>> >
>> >
>>
>> [snip]
>>
>> On which u-boot should this be tested.
>>
>> On HK u-boot tftp boot is not supported.
>
> ... so you gave an answer: you cannot test it on HK. How many other
> U-Boot flavors you know? :)
>

u-boot mainline have tftp support enable, so I will try to test on this u-boot.

Best Regards
-Anand

> Best regards,
> Krzysztof
>
>
>> ----------------------------------------------------------
>> U-Boot 2010.12-00000-g9777ca6-dirty (Nov 26 2015 - 10:10:11) for Exynox4412
>>
>>
>> CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
>> APLL = 1000MHz, MPLL = 800MHz
>> DRAM:  2 GiB
>>
>> PMIC VERSION : 0x00, CHIP REV : 2
>> TrustZone Enabled BSP
>> BL1 version: 20121128
>>
>>
>> Checking Boot Mode ... SDMMC
>> MMC Device 0: 14804 MB
>> MMC Device 1 not found
>> *** Warning - using default environment
>>
>> USB3503 NINT = OUTPUT LOW!
>> ModeKey Check... run normal_boot
>> No ethernet found.
>> Hit any key to stop autoboot:  0
>> Exynos4412 #
>> Exynos4412 #
>> Exynos4412 #
>> Exynos4412 # usb start
>> (Re)start USB...
>> USB0:   Exynos4412-ehci: init hccr 12580000 and hcor 12580010 hc_length 16
>> usb: usb_refclk_enable is active low: NO
>> ProTIP: If usb doesn't work - try playing with 'usb_invert_clken' environment
>> USB EHCI 1.00
>> scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
>> EHCI fail timeout STS_ASS set
>>
>>       USB device not accepting new address (error=80000000)
>> EHCI fail timeout STS_ASS set
>> 1 USB Device(s) found
>>        scanning usb for storage devices... 0 Storage Device(s) found
>>        scanning usb for ethernet devices... 0 Ethernet Device(s) found
>> Exynos4412 #
>>
>> Best Regards
>> -Anand

  reply	other threads:[~2017-01-09 18:27 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-07  8:51 [PATCH 0/4] ARM: exynos: Fix Odroid U3 USB/LAN when TFTP booting (power sequence) Krzysztof Kozlowski
2017-01-07  8:51 ` Krzysztof Kozlowski
2017-01-07  8:51 ` Krzysztof Kozlowski
2017-01-07  8:52 ` [PATCH 1/4] ARM: dts: exynos: Fix indentation of EHCI and OHCI ports Krzysztof Kozlowski
2017-01-07  8:52   ` Krzysztof Kozlowski
2017-01-09 16:01   ` Javier Martinez Canillas
2017-01-09 16:01     ` Javier Martinez Canillas
2017-01-09 16:01     ` Javier Martinez Canillas
2017-01-07  8:52 ` [PATCH 2/4] ARM: dts: exynos: Fix LAN9730 on Odroid U3 after tftpboot Krzysztof Kozlowski
2017-01-07  8:52   ` Krzysztof Kozlowski
2017-01-07  8:52   ` Krzysztof Kozlowski
2017-01-09 16:17   ` Javier Martinez Canillas
2017-01-09 16:17     ` Javier Martinez Canillas
2017-01-07  8:52 ` [PATCH 3/4] ARM: exynos_defconfig: Enable power sequence for Odroid U3 Krzysztof Kozlowski
2017-01-07  8:52   ` Krzysztof Kozlowski
2017-01-09 16:19   ` Javier Martinez Canillas
2017-01-09 16:19     ` Javier Martinez Canillas
2017-01-09 16:19     ` Javier Martinez Canillas
2017-01-07  8:52 ` [PATCH 4/4] ARM: multi_v7_defconfig: " Krzysztof Kozlowski
2017-01-07  8:52   ` Krzysztof Kozlowski
2017-01-07  8:52   ` Krzysztof Kozlowski
2017-01-07  9:16   ` [PATCH v1.1] " Krzysztof Kozlowski
2017-01-07  9:16     ` Krzysztof Kozlowski
2017-01-09 16:24     ` Javier Martinez Canillas
2017-01-09 16:24       ` Javier Martinez Canillas
2017-01-09 16:24       ` Javier Martinez Canillas
2017-01-09 17:38       ` Krzysztof Kozlowski
2017-01-09 17:38         ` Krzysztof Kozlowski
2017-01-09 17:38         ` Krzysztof Kozlowski
2017-01-09 17:44         ` Javier Martinez Canillas
2017-01-09 17:44           ` Javier Martinez Canillas
2017-01-09 18:04 ` [PATCH 0/4] ARM: exynos: Fix Odroid U3 USB/LAN when TFTP booting (power sequence) Anand Moon
2017-01-09 18:04   ` Anand Moon
2017-01-09 18:04   ` Anand Moon
2017-01-09 18:17   ` Krzysztof Kozlowski
2017-01-09 18:17     ` Krzysztof Kozlowski
2017-01-09 18:17     ` Krzysztof Kozlowski
2017-01-09 18:26     ` Anand Moon [this message]
2017-01-09 18:26       ` Anand Moon
2017-01-09 18:26       ` Anand Moon
2017-01-09 18:35       ` Krzysztof Kozlowski
2017-01-09 18:35         ` Krzysztof Kozlowski
2017-01-09 18:35         ` Krzysztof Kozlowski
2017-03-29 11:12 ` Hans Verkuil
2017-03-29 11:12   ` Hans Verkuil
2017-03-29 11:12   ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CANAwSgR7=cELNK9of5ngFTdhcxWn2KXL=R8tMsTKD7gecBcMYw@mail.gmail.com' \
    --to=linux.amoon@gmail.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hverkuil@xs4all.nl \
    --cc=javier@osg.samsung.com \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=m.reichl@fivetechno.de \
    --cc=m.szyprowski@samsung.com \
    --cc=peter.chen@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sre@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.