* Serial over LAN by phosphor-net-ipmid issue
@ 2021-07-12 6:40 George Hung (洪忠敬)
[not found] ` <500141627309651@mail.yandex-team.ru>
0 siblings, 1 reply; 2+ messages in thread
From: George Hung (洪忠敬) @ 2021-07-12 6:40 UTC (permalink / raw)
To: cheng.c.yang; +Cc: openbmc
Hi Cheng,
I tried to use SOL for the latest phosphor-net-ipmid, but it can't work.
I found the commit for SOL commands:
https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-net-ipmid/+/29703
It removed "setConfParams" function and also disabled to register setting SOL configuration parameters command. (i.e., ipmitool -I lanplus -H x -U x -P x raw 0x0c 0x21 can't be used)
Instead of that, it changed to use the dbus interface to update SOL parameters, but I don't know which process/service to generate the related dbus path/properties for SOL parameters.
Do I miss something to enable or config ?
Thanks.
Best Regards
George Hung
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Serial over LAN by phosphor-net-ipmid issue
[not found] ` <500141627309651@mail.yandex-team.ru>
@ 2021-07-30 2:57 ` George Liu
0 siblings, 0 replies; 2+ messages in thread
From: George Liu @ 2021-07-30 2:57 UTC (permalink / raw)
To: Konstantin Klubnichkin
Cc: openbmc, George Hung (洪忠敬), cheng.c.yang
On Mon, Jul 26, 2021 at 10:33 PM Konstantin Klubnichkin
<kitsok@yandex-team.ru> wrote:
>
> Hello George!
>
> Can you please check if there is /xyz/openbmc_project/ipmi branch in dbus?
> root:/tmp# busctl tree xyz.openbmc_project.Settings | grep sol
> │ └─/xyz/openbmc_project/ipmi/sol
> │ └─/xyz/openbmc_project/ipmi/sol/eth0
> root:/tmp#
>
> If it's not there, you need to add it via phosphor-settings-manager.
>
> 12.07.2021, 09:41, "George Hung (洪忠敬)" <george.hung@quantatw.com>:
>
> Hi Cheng,
>
> I tried to use SOL for the latest phosphor-net-ipmid, but it can't work.
>
> I found the commit for SOL commands:
> https://gerrit.openbmc-project.xyz/c/openbmc/phosphor-net-ipmid/+/29703
>
> It removed "setConfParams" function and also disabled to register setting SOL configuration parameters command. (i.e., ipmitool -I lanplus -H x -U x -P x raw 0x0c 0x21 can't be used)
>
> Instead of that, it changed to use the dbus interface to update SOL parameters, but I don't know which process/service to generate the related dbus path/properties for SOL parameters.
>
> Do I miss something to enable or config?
Please refer to: https://gerrit.openbmc-project.xyz/c/openbmc/openbmc/+/45369
>
>
> Thanks.
>
> Best Regards
> George Hung
>
>
>
>
> --
> Best regards,
> Konstantin Klubnichkin,
> lead firmware engineer,
> server hardware R&D group,
> Yandex Moscow office.
> tel: +7-903-510-33-33
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-07-30 2:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-12 6:40 Serial over LAN by phosphor-net-ipmid issue George Hung (洪忠敬)
[not found] ` <500141627309651@mail.yandex-team.ru>
2021-07-30 2:57 ` George Liu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.