[PATCH] arm64: dts: juno: fix OF graph endpoint node names

[PATCH] arm64: dts: juno: fix OF graph endpoint node names

[Rob Herring]

OF graph endpoint node names should be 'endpoint'. Fix the following
warnings found by dtc:

Warning (graph_endpoint): /hdlcd@7ff50000/port/hdlcd1-endpoint: graph endpont node nameshould be 'endpoint'
Warning (graph_endpoint): /hdlcd@7ff60000/port/hdlcd0-endpoint: graph endpont node nameshould be 'endpoint'
Warning (graph_endpoint): /i2c@7ffa0000/hdmi-transmitter@70/port/tda998x-0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /i2c@7ffa0000/hdmi-transmitter@71/port/tda998x-1-endpoint: graph endpont node name should be 'endpoint'

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index eb749c50a736..b2fedaab3fcc 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -677,7 +677,7 @@
 		clock-names = "pxlclk";
 
 		port {
-			hdlcd1_output: hdlcd1-endpoint {
+			hdlcd1_output: endpoint {
 				remote-endpoint = <&tda998x_1_input>;
 			};
 		};
@@ -692,7 +692,7 @@
 		clock-names = "pxlclk";
 
 		port {
-			hdlcd0_output: hdlcd0-endpoint {
+			hdlcd0_output: endpoint {
 				remote-endpoint = <&tda998x_0_input>;
 			};
 		};
@@ -720,7 +720,7 @@
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
 			port {
-				tda998x_0_input: tda998x-0-endpoint {
+				tda998x_0_input: endpoint {
 					remote-endpoint = <&hdlcd0_output>;
 				};
 			};
@@ -730,7 +730,7 @@
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
 			port {
-				tda998x_1_input: tda998x-1-endpoint {
+				tda998x_1_input: endpoint {
 					remote-endpoint = <&hdlcd1_output>;
 				};
 			};
-- 
2.17.0

[PATCH] arm64: dts: juno: fix OF graph endpoint node names

[Rob Herring]

OF graph endpoint node names should be 'endpoint'. Fix the following
warnings found by dtc:

Warning (graph_endpoint): /hdlcd at 7ff50000/port/hdlcd1-endpoint: graph endpont node nameshould be 'endpoint'
Warning (graph_endpoint): /hdlcd at 7ff60000/port/hdlcd0-endpoint: graph endpont node nameshould be 'endpoint'
Warning (graph_endpoint): /i2c at 7ffa0000/hdmi-transmitter at 70/port/tda998x-0-endpoint: graph endpont node name should be 'endpoint'
Warning (graph_endpoint): /i2c at 7ffa0000/hdmi-transmitter at 71/port/tda998x-1-endpoint: graph endpont node name should be 'endpoint'

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-base.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index eb749c50a736..b2fedaab3fcc 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -677,7 +677,7 @@
 		clock-names = "pxlclk";
 
 		port {
-			hdlcd1_output: hdlcd1-endpoint {
+			hdlcd1_output: endpoint {
 				remote-endpoint = <&tda998x_1_input>;
 			};
 		};
@@ -692,7 +692,7 @@
 		clock-names = "pxlclk";
 
 		port {
-			hdlcd0_output: hdlcd0-endpoint {
+			hdlcd0_output: endpoint {
 				remote-endpoint = <&tda998x_0_input>;
 			};
 		};
@@ -720,7 +720,7 @@
 			compatible = "nxp,tda998x";
 			reg = <0x70>;
 			port {
-				tda998x_0_input: tda998x-0-endpoint {
+				tda998x_0_input: endpoint {
 					remote-endpoint = <&hdlcd0_output>;
 				};
 			};
@@ -730,7 +730,7 @@
 			compatible = "nxp,tda998x";
 			reg = <0x71>;
 			port {
-				tda998x_1_input: tda998x-1-endpoint {
+				tda998x_1_input: endpoint {
 					remote-endpoint = <&hdlcd1_output>;
 				};
 			};
-- 
2.17.0

[PATCH] arm64: dts: juno: fix missing Coresight STM graph connection

[Rob Herring]

OF graph endpoint connections must be bidirectional. Fix 2 missing
connections to the STM output port:

arch/arm64/boot/dts/arm/juno-r1.dtb: Warning (graph_endpoint): /stm@20100000/port/endpoint: graph connection to node '/funnel@20130000/ports/port@1/endpoint' is not bidirectional
arch/arm64/boot/dts/arm/juno-r2.dtb: Warning (graph_endpoint): /stm@20100000/port/endpoint: graph connection to node '/funnel@20130000/ports/port@1/endpoint' is not bidirectional

Fixes: cde6f9ab10c6 ("arm64: dts: juno: add missing CoreSight STM component")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-r1.dts | 4 ++++
 arch/arm64/boot/dts/arm/juno-r2.dts | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index aed6389468c4..c52c5c40dede 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -278,6 +278,10 @@
 	remote-endpoint = <&csys2_funnel_out_port>;
 };
 
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
 &stm_out_port {
 	remote-endpoint = <&csys1_funnel_in_port0>;
 };
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index b39b6d6ec5aa..a90982ceda35 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -278,6 +278,10 @@
 	remote-endpoint = <&csys2_funnel_out_port>;
 };
 
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
 &stm_out_port {
 	remote-endpoint = <&csys1_funnel_in_port0>;
 };
-- 
2.17.0

[PATCH] arm64: dts: juno: fix missing Coresight STM graph connection

[Rob Herring]

OF graph endpoint connections must be bidirectional. Fix 2 missing
connections to the STM output port:

arch/arm64/boot/dts/arm/juno-r1.dtb: Warning (graph_endpoint): /stm at 20100000/port/endpoint: graph connection to node '/funnel at 20130000/ports/port at 1/endpoint' is not bidirectional
arch/arm64/boot/dts/arm/juno-r2.dtb: Warning (graph_endpoint): /stm at 20100000/port/endpoint: graph connection to node '/funnel at 20130000/ports/port at 1/endpoint' is not bidirectional

Fixes: cde6f9ab10c6 ("arm64: dts: juno: add missing CoreSight STM component")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/arm/juno-r1.dts | 4 ++++
 arch/arm64/boot/dts/arm/juno-r2.dts | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index aed6389468c4..c52c5c40dede 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -278,6 +278,10 @@
 	remote-endpoint = <&csys2_funnel_out_port>;
 };
 
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
 &stm_out_port {
 	remote-endpoint = <&csys1_funnel_in_port0>;
 };
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index b39b6d6ec5aa..a90982ceda35 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -278,6 +278,10 @@
 	remote-endpoint = <&csys2_funnel_out_port>;
 };
 
+&csys1_funnel_in_port0 {
+	remote-endpoint = <&stm_out_port>;
+};
+
 &stm_out_port {
 	remote-endpoint = <&csys1_funnel_in_port0>;
 };
-- 
2.17.0

[PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Rob Herring]

The ETF input should be connected to the funnel output, and the ETF
output should be connected to the replicator input. The labels are wrong
and these got swapped:

Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional

Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 66b318e1de80..aef814b2dc9e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1191,14 +1191,14 @@
 
 				port@0 {
 					reg = <0>;
-					etf_out: endpoint {
+					etf_in: endpoint {
 						slave-mode;
 						remote-endpoint = <&funnel0_out>;
 					};
 				};
 				port@1 {
 					reg = <0>;
-					etf_in: endpoint {
+					etf_out: endpoint {
 						remote-endpoint = <&replicator_in>;
 					};
 				};
-- 
2.17.0

[PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Rob Herring]

The ETF input should be connected to the funnel output, and the ETF
output should be connected to the replicator input. The labels are wrong
and these got swapped:

Warning (graph_endpoint): /soc/funnel at 821000/ports/port at 8/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 1/endpoint' is not bidirectional
Warning (graph_endpoint): /soc/replicator at 824000/ports/port at 2/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 0/endpoint' is not bidirectional

Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: linux-arm-msm at vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 66b318e1de80..aef814b2dc9e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1191,14 +1191,14 @@
 
 				port at 0 {
 					reg = <0>;
-					etf_out: endpoint {
+					etf_in: endpoint {
 						slave-mode;
 						remote-endpoint = <&funnel0_out>;
 					};
 				};
 				port at 1 {
 					reg = <0>;
-					etf_in: endpoint {
+					etf_out: endpoint {
 						remote-endpoint = <&replicator_in>;
 					};
 				};
-- 
2.17.0

Re: [PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Rob Herring]

On Tue, May 8, 2018 at 10:09 AM, Rob Herring <robh@kernel.org> wrote:
> The ETF input should be connected to the funnel output, and the ETF
> output should be connected to the replicator input. The labels are wrong
> and these got swapped:
>
> Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
> Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional
>
> Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Ping. Still seeing warnings in -next for these.

Rob

[PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Rob Herring]

On Tue, May 8, 2018 at 10:09 AM, Rob Herring <robh@kernel.org> wrote:
> The ETF input should be connected to the funnel output, and the ETF
> output should be connected to the replicator input. The labels are wrong
> and these got swapped:
>
> Warning (graph_endpoint): /soc/funnel at 821000/ports/port at 8/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 1/endpoint' is not bidirectional
> Warning (graph_endpoint): /soc/replicator at 824000/ports/port at 2/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 0/endpoint' is not bidirectional
>
> Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> Cc: Andy Gross <andy.gross@linaro.org>
> Cc: David Brown <david.brown@linaro.org>
> Cc: linux-arm-msm at vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Ping. Still seeing warnings in -next for these.

Rob

Re: [PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Ivan T. Ivanov]

Quoting Rob Herring (2018-05-23 23:29:29)
> On Tue, May 8, 2018 at 10:09 AM, Rob Herring <robh@kernel.org> wrote:
> > The ETF input should be connected to the funnel output, and the ETF
> > output should be connected to the replicator input. The labels are wrong
> > and these got swapped:
> >
> > Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
> > Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional
> >
> > Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
> > Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> > Cc: Andy Gross <andy.gross@linaro.org>
> > Cc: David Brown <david.brown@linaro.org>
> > Cc: linux-arm-msm@vger.kernel.org
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> >  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> Ping. Still seeing warnings in -next for these.
>

 Hi Rob,

 I no longer have access to this hardware and documentation.
 I am sure that Mathieu and friends will take care for verification
 of this patch :-)

 Regards,
 Ivan

[PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Ivan T. Ivanov]

Quoting Rob Herring (2018-05-23 23:29:29)
> On Tue, May 8, 2018 at 10:09 AM, Rob Herring <robh@kernel.org> wrote:
> > The ETF input should be connected to the funnel output, and the ETF
> > output should be connected to the replicator input. The labels are wrong
> > and these got swapped:
> >
> > Warning (graph_endpoint): /soc/funnel at 821000/ports/port at 8/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 1/endpoint' is not bidirectional
> > Warning (graph_endpoint): /soc/replicator at 824000/ports/port at 2/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 0/endpoint' is not bidirectional
> >
> > Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
> > Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
> > Cc: Andy Gross <andy.gross@linaro.org>
> > Cc: David Brown <david.brown@linaro.org>
> > Cc: linux-arm-msm at vger.kernel.org
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> >  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> Ping. Still seeing warnings in -next for these.
>

 Hi Rob,

 I no longer have access to this hardware and documentation.
 I am sure that Mathieu and friends will take care for verification
 of this patch :-)

 Regards,
 Ivan

Re: [PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Mathieu Poirier]

On 23 May 2018 at 22:48, Ivan T. Ivanov <iivanov.xz@gmail.com> wrote:
> Quoting Rob Herring (2018-05-23 23:29:29)
>> On Tue, May 8, 2018 at 10:09 AM, Rob Herring <robh@kernel.org> wrote:
>> > The ETF input should be connected to the funnel output, and the ETF
>> > output should be connected to the replicator input. The labels are wrong
>> > and these got swapped:
>> >
>> > Warning (graph_endpoint): /soc/funnel@821000/ports/port@8/endpoint: graph connection to node '/soc/etf@825000/ports/port@1/endpoint' is not bidirectional
>> > Warning (graph_endpoint): /soc/replicator@824000/ports/port@2/endpoint: graph connection to node '/soc/etf@825000/ports/port@0/endpoint' is not bidirectional
>> >
>> > Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
>> > Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
>> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> > Cc: Andy Gross <andy.gross@linaro.org>
>> > Cc: David Brown <david.brown@linaro.org>
>> > Cc: linux-arm-msm@vger.kernel.org
>> > Signed-off-by: Rob Herring <robh@kernel.org>
>> > ---
>> >  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
>> >  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> Ping. Still seeing warnings in -next for these.
>>
>
>  Hi Rob,
>
>  I no longer have access to this hardware and documentation.
>  I am sure that Mathieu and friends will take care for verification
>  of this patch :-)

The code triggers on the "slave-mode" property rather than the labels,
so this patch has no effect on how a path is established.  I've tested
this on a 410c and things look good.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>

>
>  Regards,
>  Ivan
>

[PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Mathieu Poirier]

On 23 May 2018 at 22:48, Ivan T. Ivanov <iivanov.xz@gmail.com> wrote:
> Quoting Rob Herring (2018-05-23 23:29:29)
>> On Tue, May 8, 2018 at 10:09 AM, Rob Herring <robh@kernel.org> wrote:
>> > The ETF input should be connected to the funnel output, and the ETF
>> > output should be connected to the replicator input. The labels are wrong
>> > and these got swapped:
>> >
>> > Warning (graph_endpoint): /soc/funnel at 821000/ports/port at 8/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 1/endpoint' is not bidirectional
>> > Warning (graph_endpoint): /soc/replicator at 824000/ports/port at 2/endpoint: graph connection to node '/soc/etf at 825000/ports/port at 0/endpoint' is not bidirectional
>> >
>> > Fixes: 7c10da373698 ("arm64: dts: qcom: Add msm8916 CoreSight components")
>> > Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
>> > Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
>> > Cc: Andy Gross <andy.gross@linaro.org>
>> > Cc: David Brown <david.brown@linaro.org>
>> > Cc: linux-arm-msm at vger.kernel.org
>> > Signed-off-by: Rob Herring <robh@kernel.org>
>> > ---
>> >  arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++--
>> >  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> Ping. Still seeing warnings in -next for these.
>>
>
>  Hi Rob,
>
>  I no longer have access to this hardware and documentation.
>  I am sure that Mathieu and friends will take care for verification
>  of this patch :-)

The code triggers on the "slave-mode" property rather than the labels,
so this patch has no effect on how a path is established.  I've tested
this on a 410c and things look good.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>

>
>  Regards,
>  Ivan
>

Re: [PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Andy Gross]

On Thu, May 24, 2018 at 10:32:46AM -0600, Mathieu Poirier wrote:

<snip>

> >
> >  Hi Rob,
> >
> >  I no longer have access to this hardware and documentation.
> >  I am sure that Mathieu and friends will take care for verification
> >  of this patch :-)
> 
> The code triggers on the "slave-mode" property rather than the labels,
> so this patch has no effect on how a path is established.  I've tested
> this on a 410c and things look good.
> 
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Thanks for verifying this Matthew.  I'll put this in for a fixes as I just sent
out my last set for 4.18.

Regards,

Andy

[PATCH] arm64: dts: msm8916: fix Coresight ETF graph connections

[Andy Gross]

On Thu, May 24, 2018 at 10:32:46AM -0600, Mathieu Poirier wrote:

<snip>

> >
> >  Hi Rob,
> >
> >  I no longer have access to this hardware and documentation.
> >  I am sure that Mathieu and friends will take care for verification
> >  of this patch :-)
> 
> The code triggers on the "slave-mode" property rather than the labels,
> so this patch has no effect on how a path is established.  I've tested
> this on a 410c and things look good.
> 
> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org>

Thanks for verifying this Matthew.  I'll put this in for a fixes as I just sent
out my last set for 4.18.

Regards,

Andy

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Rob Herring]

dtc now warns on incomplete OF graph endpoint connections:

arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional

The cause is a typo in 'remote-endpoint'.

Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/sprd/sc9860.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 5dbfb796d9f9..dcd03ffcda03 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -326,7 +326,7 @@
 					reg = <4>;
 					soc_funnel_in_port1: endpoint {
 						slave-mode;
-						remote-endpioint =
+						remote-endpoint =
 							<&stm_out_port>;
 					};
 				};
-- 
2.17.0

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Rob Herring]

dtc now warns on incomplete OF graph endpoint connections:

arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm at 10006000/port/endpoint: graph connection to node '/soc/funnel at 10001000/ports/port at 2/endpoint' is not bidirectional

The cause is a typo in 'remote-endpoint'.

Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang@linaro.org>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 arch/arm64/boot/dts/sprd/sc9860.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index 5dbfb796d9f9..dcd03ffcda03 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -326,7 +326,7 @@
 					reg = <4>;
 					soc_funnel_in_port1: endpoint {
 						slave-mode;
-						remote-endpioint =
+						remote-endpoint =
 							<&stm_out_port>;
 					};
 				};
-- 
2.17.0

Re: [PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Chunyan Zhang]

Hi Rob,

On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
> dtc now warns on incomplete OF graph endpoint connections:
>
> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional
>
> The cause is a typo in 'remote-endpoint'.

Thanks for fixing this and,

Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>

>
> Cc: Orson Zhai <orsonzhai@gmail.com>
> Cc: Baolin Wang <baolin.wang@linaro.org>
> Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/sprd/sc9860.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> index 5dbfb796d9f9..dcd03ffcda03 100644
> --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
> +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> @@ -326,7 +326,7 @@
>                                         reg = <4>;
>                                         soc_funnel_in_port1: endpoint {
>                                                 slave-mode;
> -                                               remote-endpioint =
> +                                               remote-endpoint =
>                                                         <&stm_out_port>;
>                                         };
>                                 };
> --
> 2.17.0
>

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Chunyan Zhang]

Hi Rob,

On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
> dtc now warns on incomplete OF graph endpoint connections:
>
> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm at 10006000/port/endpoint: graph connection to node '/soc/funnel at 10001000/ports/port at 2/endpoint' is not bidirectional
>
> The cause is a typo in 'remote-endpoint'.

Thanks for fixing this and,

Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>

>
> Cc: Orson Zhai <orsonzhai@gmail.com>
> Cc: Baolin Wang <baolin.wang@linaro.org>
> Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/sprd/sc9860.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> index 5dbfb796d9f9..dcd03ffcda03 100644
> --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
> +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> @@ -326,7 +326,7 @@
>                                         reg = <4>;
>                                         soc_funnel_in_port1: endpoint {
>                                                 slave-mode;
> -                                               remote-endpioint =
> +                                               remote-endpoint =
>                                                         <&stm_out_port>;
>                                         };
>                                 };
> --
> 2.17.0
>

Re: [PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Rob Herring]

On Tue, May 8, 2018 at 8:58 PM, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
> Hi Rob,
>
> On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
>> dtc now warns on incomplete OF graph endpoint connections:
>>
>> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional
>>
>> The cause is a typo in 'remote-endpoint'.
>
> Thanks for fixing this and,
>
> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>

Is someone going to apply this? Still seeing warnings in linux-next.

Rob

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Rob Herring]

On Tue, May 8, 2018 at 8:58 PM, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
> Hi Rob,
>
> On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
>> dtc now warns on incomplete OF graph endpoint connections:
>>
>> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm at 10006000/port/endpoint: graph connection to node '/soc/funnel at 10001000/ports/port at 2/endpoint' is not bidirectional
>>
>> The cause is a typo in 'remote-endpoint'.
>
> Thanks for fixing this and,
>
> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>

Is someone going to apply this? Still seeing warnings in linux-next.

Rob

Re: [PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Baolin Wang]

On 24 May 2018 at 04:30, Rob Herring <robh@kernel.org> wrote:
> On Tue, May 8, 2018 at 8:58 PM, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
>> Hi Rob,
>>
>> On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
>>> dtc now warns on incomplete OF graph endpoint connections:
>>>
>>> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional
>>>
>>> The cause is a typo in 'remote-endpoint'.
>>
>> Thanks for fixing this and,
>>
>> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
>
> Is someone going to apply this? Still seeing warnings in linux-next.

I think Arnd will pick up this patch.

-- 
Baolin.wang
Best Regards

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Baolin Wang]

On 24 May 2018 at 04:30, Rob Herring <robh@kernel.org> wrote:
> On Tue, May 8, 2018 at 8:58 PM, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
>> Hi Rob,
>>
>> On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
>>> dtc now warns on incomplete OF graph endpoint connections:
>>>
>>> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm at 10006000/port/endpoint: graph connection to node '/soc/funnel at 10001000/ports/port at 2/endpoint' is not bidirectional
>>>
>>> The cause is a typo in 'remote-endpoint'.
>>
>> Thanks for fixing this and,
>>
>> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
>
> Is someone going to apply this? Still seeing warnings in linux-next.

I think Arnd will pick up this patch.

-- 
Baolin.wang
Best Regards

Re: [PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Chunyan Zhang]

Hi Arnd, Olof

Could you please take this patch through arm-soc git?

Thanks,
Chunyan

On 24 May 2018 at 04:30, Rob Herring <robh@kernel.org> wrote:
> On Tue, May 8, 2018 at 8:58 PM, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
>> Hi Rob,
>>
>> On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
>>> dtc now warns on incomplete OF graph endpoint connections:
>>>
>>> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm@10006000/port/endpoint: graph connection to node '/soc/funnel@10001000/ports/port@2/endpoint' is not bidirectional
>>>
>>> The cause is a typo in 'remote-endpoint'.
>>
>> Thanks for fixing this and,
>>
>> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
>
> Is someone going to apply this? Still seeing warnings in linux-next.
>
> Rob

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Chunyan Zhang]

Hi Arnd, Olof

Could you please take this patch through arm-soc git?

Thanks,
Chunyan

On 24 May 2018 at 04:30, Rob Herring <robh@kernel.org> wrote:
> On Tue, May 8, 2018 at 8:58 PM, Chunyan Zhang <zhang.lyra@gmail.com> wrote:
>> Hi Rob,
>>
>> On 8 May 2018 at 23:09, Rob Herring <robh@kernel.org> wrote:
>>> dtc now warns on incomplete OF graph endpoint connections:
>>>
>>> arch/arm64/boot/dts/sprd/sp9860g-1h10.dtb: Warning (graph_endpoint): /soc/stm at 10006000/port/endpoint: graph connection to node '/soc/funnel at 10001000/ports/port at 2/endpoint' is not bidirectional
>>>
>>> The cause is a typo in 'remote-endpoint'.
>>
>> Thanks for fixing this and,
>>
>> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
>
> Is someone going to apply this? Still seeing warnings in linux-next.
>
> Rob

Re: [PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Olof Johansson]

On Fri, May 25, 2018 at 10:36:45AM +0800, Chunyan Zhang wrote:
> Hi Arnd, Olof
> 
> Could you please take this patch through arm-soc git?

Applied.


-Olof

[PATCH] arm64: dts: sprd: fix typo in 'remote-endpoint'

[Olof Johansson]

On Fri, May 25, 2018 at 10:36:45AM +0800, Chunyan Zhang wrote:
> Hi Arnd, Olof
> 
> Could you please take this patch through arm-soc git?

Applied.


-Olof

Re: [PATCH] arm64: dts: juno: fix OF graph endpoint node names

[Liviu Dudau]

On Tue, May 08, 2018 at 10:09:49AM -0500, Rob Herring wrote:
> OF graph endpoint node names should be 'endpoint'. Fix the following
> warnings found by dtc:
> 
> Warning (graph_endpoint): /hdlcd@7ff50000/port/hdlcd1-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /hdlcd@7ff60000/port/hdlcd0-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /i2c@7ffa0000/hdmi-transmitter@70/port/tda998x-0-endpoint: graph endpont node name should be 'endpoint'
> Warning (graph_endpoint): /i2c@7ffa0000/hdmi-transmitter@71/port/tda998x-1-endpoint: graph endpont node name should be 'endpoint'
> 
> Cc: Liviu Dudau <liviu.dudau@arm.com>

Acked-by: Liviu Dudau <liviu.dudau@arm.com>

Thanks for this!
Liviu

> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/arm/juno-base.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
> index eb749c50a736..b2fedaab3fcc 100644
> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
> @@ -677,7 +677,7 @@
>  		clock-names = "pxlclk";
>  
>  		port {
> -			hdlcd1_output: hdlcd1-endpoint {
> +			hdlcd1_output: endpoint {
>  				remote-endpoint = <&tda998x_1_input>;
>  			};
>  		};
> @@ -692,7 +692,7 @@
>  		clock-names = "pxlclk";
>  
>  		port {
> -			hdlcd0_output: hdlcd0-endpoint {
> +			hdlcd0_output: endpoint {
>  				remote-endpoint = <&tda998x_0_input>;
>  			};
>  		};
> @@ -720,7 +720,7 @@
>  			compatible = "nxp,tda998x";
>  			reg = <0x70>;
>  			port {
> -				tda998x_0_input: tda998x-0-endpoint {
> +				tda998x_0_input: endpoint {
>  					remote-endpoint = <&hdlcd0_output>;
>  				};
>  			};
> @@ -730,7 +730,7 @@
>  			compatible = "nxp,tda998x";
>  			reg = <0x71>;
>  			port {
> -				tda998x_1_input: tda998x-1-endpoint {
> +				tda998x_1_input: endpoint {
>  					remote-endpoint = <&hdlcd1_output>;
>  				};
>  			};
> -- 
> 2.17.0
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH] arm64: dts: juno: fix OF graph endpoint node names

[Liviu Dudau]

On Tue, May 08, 2018 at 10:09:49AM -0500, Rob Herring wrote:
> OF graph endpoint node names should be 'endpoint'. Fix the following
> warnings found by dtc:
> 
> Warning (graph_endpoint): /hdlcd at 7ff50000/port/hdlcd1-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /hdlcd at 7ff60000/port/hdlcd0-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /i2c at 7ffa0000/hdmi-transmitter at 70/port/tda998x-0-endpoint: graph endpont node name should be 'endpoint'
> Warning (graph_endpoint): /i2c at 7ffa0000/hdmi-transmitter at 71/port/tda998x-1-endpoint: graph endpont node name should be 'endpoint'
> 
> Cc: Liviu Dudau <liviu.dudau@arm.com>

Acked-by: Liviu Dudau <liviu.dudau@arm.com>

Thanks for this!
Liviu

> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/arm/juno-base.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
> index eb749c50a736..b2fedaab3fcc 100644
> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
> @@ -677,7 +677,7 @@
>  		clock-names = "pxlclk";
>  
>  		port {
> -			hdlcd1_output: hdlcd1-endpoint {
> +			hdlcd1_output: endpoint {
>  				remote-endpoint = <&tda998x_1_input>;
>  			};
>  		};
> @@ -692,7 +692,7 @@
>  		clock-names = "pxlclk";
>  
>  		port {
> -			hdlcd0_output: hdlcd0-endpoint {
> +			hdlcd0_output: endpoint {
>  				remote-endpoint = <&tda998x_0_input>;
>  			};
>  		};
> @@ -720,7 +720,7 @@
>  			compatible = "nxp,tda998x";
>  			reg = <0x70>;
>  			port {
> -				tda998x_0_input: tda998x-0-endpoint {
> +				tda998x_0_input: endpoint {
>  					remote-endpoint = <&hdlcd0_output>;
>  				};
>  			};
> @@ -730,7 +730,7 @@
>  			compatible = "nxp,tda998x";
>  			reg = <0x71>;
>  			port {
> -				tda998x_1_input: tda998x-1-endpoint {
> +				tda998x_1_input: endpoint {
>  					remote-endpoint = <&hdlcd1_output>;
>  				};
>  			};
> -- 
> 2.17.0
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ?\_(?)_/?

Re: [PATCH] arm64: dts: juno: fix OF graph endpoint node names

[Sudeep Holla]

On 08/05/18 16:09, Rob Herring wrote:
> OF graph endpoint node names should be 'endpoint'. Fix the following
> warnings found by dtc:
> 
> Warning (graph_endpoint): /hdlcd@7ff50000/port/hdlcd1-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /hdlcd@7ff60000/port/hdlcd0-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /i2c@7ffa0000/hdmi-transmitter@70/port/tda998x-0-endpoint: graph endpont node name should be 'endpoint'
> Warning (graph_endpoint): /i2c@7ffa0000/hdmi-transmitter@71/port/tda998x-1-endpoint: graph endpont node name should be 'endpoint'
> 
> Cc: Liviu Dudau <liviu.dudau@arm.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Rob Herring <robh@kernel.org>

Thanks Robs, both patches applied.

-- 
Regards,
Sudeep

[PATCH] arm64: dts: juno: fix OF graph endpoint node names

[Sudeep Holla]

On 08/05/18 16:09, Rob Herring wrote:
> OF graph endpoint node names should be 'endpoint'. Fix the following
> warnings found by dtc:
> 
> Warning (graph_endpoint): /hdlcd at 7ff50000/port/hdlcd1-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /hdlcd at 7ff60000/port/hdlcd0-endpoint: graph endpont node nameshould be 'endpoint'
> Warning (graph_endpoint): /i2c at 7ffa0000/hdmi-transmitter at 70/port/tda998x-0-endpoint: graph endpont node name should be 'endpoint'
> Warning (graph_endpoint): /i2c at 7ffa0000/hdmi-transmitter at 71/port/tda998x-1-endpoint: graph endpont node name should be 'endpoint'
> 
> Cc: Liviu Dudau <liviu.dudau@arm.com>
> Cc: Sudeep Holla <sudeep.holla@arm.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Signed-off-by: Rob Herring <robh@kernel.org>

Thanks Robs, both patches applied.

-- 
Regards,
Sudeep