[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Heiko Schocher]

Patch 1 introduces bootcount support for the 3 siemens boards. As there
is no other possibility on this boards, the bootcounter is stored in the
environment. To prevent a "saveenv" on all reboots, a "upgrade_available"
U-Boot Environment variable is introduced.

Patch 2 makes the enabling of the RTC32K OSC configurable, as
on the dxr2 board it is not used, and
http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast
says not enable things not used ...

Patch 3 adds an option to set the iSerialNumber board specific, which
is used on the 3 siemens boards.

Patch 4 adds an option to set the bcdDevice number board specific, which
is used on the 3 siemens boards.

Patch 5 contains a lot of updates for the siemens boards, see commit
message for detailed information.

already posted patches on which this patchserie is based:

[U-Boot,v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
http://patchwork.ozlabs.org/patch/285390/

[U-Boot] video, cfb_console: make background and foreground color configurable
http://patchwork.ozlabs.org/patch/285385/

[U-Boot] video, formike: change tag/val write
http://patchwork.ozlabs.org/patch/285386/

[U-Boot] net, phy: fix AR8031 phy_mask
http://patchwork.ozlabs.org/patch/276944/

[U-Boot,2/3] net, phy: fix NULL pointer deference
http://patchwork.ozlabs.org/patch/272797/


changes for v2:

- added comments from Lukasz Majewski for the USB DFU related parts

Heiko Schocher (4):
  bootcount: store bootcount var in environment
  arm, am33x: make RTC32K OSC enable configurable
  usb, g_dnl: make iSerialNumber board configurable
  usb, g_dnl: make bcdDevice value configurable

Samuel Egli (1):
  arm, am335x: update for the siemens boards

 README                                 |  19 ++++
 arch/arm/cpu/armv7/am33xx/board.c      |   4 +
 board/siemens/common/factoryset.c      |  24 ++++-
 board/siemens/common/factoryset.h      |   2 +
 board/siemens/dxr2/board.c             |  11 +--
 board/siemens/dxr2/board.h             |   9 +-
 board/siemens/dxr2/mux.c               | 158 +++++++++++++++++++++++++++++++++
 board/siemens/pxm2/board.c             |   3 +-
 board/siemens/rut/board.c              |  51 +++++++++--
 drivers/bootcount/Makefile             |   1 +
 drivers/bootcount/bootcount_env.c      |  29 ++++++
 drivers/usb/gadget/g_dnl.c             |  43 ++++++++-
 include/configs/dxr2.h                 |  13 ++-
 include/configs/pxm2.h                 |   7 +-
 include/configs/rut.h                  |  10 ++-
 include/configs/siemens-am33x-common.h |  69 ++++++++++----
 include/configs/ti_am335x_common.h     |   1 +
 include/g_dnl.h                        |   1 +
 18 files changed, 399 insertions(+), 56 deletions(-)
 create mode 100644 drivers/bootcount/bootcount_env.c

Cc: Tom Rini <trini@ti.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Samuel Egli <samuel.egli@siemens.com>
Cc: Pascal Bach <pascal.bach@siemens.com>
Cc: Roger Meier <r.meier@siemens.com>
Cc: Matthias Michel <matthias.michel@siemens.com>

-- 
1.8.3.1

[U-Boot] [PATCH v2 1/5] bootcount: store bootcount var in environment

[Heiko Schocher]

If no softreset save registers are found on the hardware
"bootcount" is stored in the environment. To prevent a
saveenv on all reboots, the environment variable
"upgrade_available" is introduced. If "upgrade_available" is
0, "bootcount" is always 0 therefore no need to save the
environment on u-boot boot, if "upgrade_available" is 1 "bootcount"
is incremented in the environment and environment gets written
on u-boot start.
So the Userspace Applikation must set the "upgrade_available"
and "bootcount" variable to 0 (for example with fw_setenv),
if a boot was successfully.

Signed-off-by: Heiko Schocher <hs@denx.de>
---
- no changes for v2

 README                            | 16 ++++++++++++++++
 drivers/bootcount/Makefile        |  1 +
 drivers/bootcount/bootcount_env.c | 29 +++++++++++++++++++++++++++++
 3 files changed, 46 insertions(+)
 create mode 100644 drivers/bootcount/bootcount_env.c

diff --git a/README b/README
index 232c96a..2558e42 100644
--- a/README
+++ b/README
@@ -784,6 +784,22 @@ The following options need to be configured:
 		as a convenience, when switching between booting from
 		RAM and NFS.
 
+- Bootcount:
+		CONFIG_BOOTCOUNT_LIMIT
+		Implements a mechanism for detecting a repeating reboot
+		cycle, see:
+		http://www.denx.de/wiki/view/DULG/UBootBootCountLimit
+
+		CONFIG_BOOTCOUNT_ENV
+		If no softreset save registers are found on the hardware
+		"bootcount" is stored in the environment. To prevent a
+		saveenv on all reboots, the environment variable
+		"upgrade_available" is used. If "upgrade_available" is
+		0, "bootcount" is always 0, if "upgrade_available" is
+		1 "bootcount" is incremented in the environment.
+		So the Userspace Applikation must set the "upgrade_available"
+		and "bootcount" variable to 0, if a boot was successfully.
+
 - Pre-Boot Commands:
 		CONFIG_PREBOOT
 
diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile
index 2b517b6..8ec0423 100644
--- a/drivers/bootcount/Makefile
+++ b/drivers/bootcount/Makefile
@@ -11,6 +11,7 @@ COBJS-$(CONFIG_AT91SAM9XE)	+= bootcount_at91.o
 COBJS-$(CONFIG_BLACKFIN)	+= bootcount_blackfin.o
 COBJS-$(CONFIG_SOC_DA8XX)	+= bootcount_davinci.o
 COBJS-$(CONFIG_BOOTCOUNT_RAM)	+= bootcount_ram.o
+COBJS-$(CONFIG_BOOTCOUNT_ENV)	+= bootcount_env.o
 
 COBJS	:= $(COBJS-y)
 SRCS 	:= $(COBJS:.o=.c)
diff --git a/drivers/bootcount/bootcount_env.c b/drivers/bootcount/bootcount_env.c
new file mode 100644
index 0000000..2d6e8db
--- /dev/null
+++ b/drivers/bootcount/bootcount_env.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2013
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+void bootcount_store(ulong a)
+{
+	int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+
+	if (upgrade_available) {
+		setenv_ulong("bootcount", a);
+		saveenv();
+	}
+}
+
+ulong bootcount_load(void)
+{
+	int upgrade_available = getenv_ulong("upgrade_available", 10, 0);
+	ulong val = 0;
+
+	if (upgrade_available)
+		val = getenv_ulong("bootcount", 10, 0);
+
+	return val;
+}
-- 
1.8.3.1

[U-Boot] [PATCH v2 2/5] arm, am33x: make RTC32K OSC enable configurable

[Heiko Schocher]

As
http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast
states:
"Initialize devices only when they are needed within U-Boot"

enable the RTC32K OSC only, if CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is
enabled. Enable this in ti_am335x_common.h, so all boards in mainline
should work as before.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>

---

On the dxr2 board the RTC32K_OSC it is not used, so disable it for
this board, done in the 5th patch of this patchserie
"arm-am335x-update-for-the-siemens-boards"

- no changes for v2
---
 README                             | 3 +++
 arch/arm/cpu/armv7/am33xx/board.c  | 4 ++++
 include/configs/ti_am335x_common.h | 1 +
 3 files changed, 8 insertions(+)

diff --git a/README b/README
index 2558e42..529c2d4 100644
--- a/README
+++ b/README
@@ -4300,6 +4300,9 @@ Low Level (hardware related) configuration options:
 
 		NOTE : currently only supported on AM335x platforms.
 
+- CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC:
+		Enables the RTC32K OSC on AM33xx based plattforms
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index a31bf40..7465ec5 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -148,6 +148,7 @@ __weak void am33xx_spl_board_init(void)
 	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
 }
 
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 static void rtc32k_enable(void)
 {
 	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
@@ -163,6 +164,7 @@ static void rtc32k_enable(void)
 	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
 	writel((1 << 3) | (1 << 6), &rtc->osc);
 }
+#endif
 
 static void uart_soft_reset(void)
 {
@@ -231,8 +233,10 @@ void s_init(void)
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 	prcm_init();
 	set_mux_conf_regs();
+#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
+#endif
 	sdram_init();
 #endif
 }
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index d2e34ae..3441b0a 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -18,6 +18,7 @@
 #define CONFIG_SYS_CACHELINE_SIZE       64
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
+#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #include <asm/arch/omap.h>
 
-- 
1.8.3.1

[U-Boot] [PATCH v2 3/5] usb, g_dnl: make iSerialNumber board configurable

[Heiko Schocher]

add the possibility to set the iSerialNumber board specific.
Default value for iSerialNumber is 0x0. This value can
changed board specific through the new function
g_dnl_set_serialnumber() which must be called from the
board specific function g_dnl_bind_fixup().

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>

---
changes for v2:
- as Lukasz Majewski suggested, remove CONFIG_G_DNL_SERIAL_STRING
  define
---
 drivers/usb/gadget/g_dnl.c | 20 ++++++++++++++++++++
 include/g_dnl.h            |  1 +
 2 files changed, 21 insertions(+)

diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index 40868c0..7a3d507 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -32,6 +32,9 @@
 #define STRING_PRODUCT 2
 /* Index of String Descriptor describing this configuration */
 #define STRING_USBDOWN 2
+/* Index of String serial */
+#define STRING_SERIAL  3
+#define MAX_STRING_SERIAL	32
 /* Number of supported configurations */
 #define CONFIGURATION_NUMBER 1
 
@@ -39,8 +42,16 @@
 
 static const char shortname[] = "usb_dnl_";
 static const char product[] = "USB download gadget";
+static char g_dnl_serial[MAX_STRING_SERIAL];
 static const char manufacturer[] = CONFIG_G_DNL_MANUFACTURER;
 
+void g_dnl_set_serialnumber(char *s)
+{
+	memset(g_dnl_serial, 0, MAX_STRING_SERIAL);
+	if (strlen(s) < MAX_STRING_SERIAL)
+		strncpy(g_dnl_serial, s, strlen(s));
+}
+
 static struct usb_device_descriptor device_desc = {
 	.bLength = sizeof device_desc,
 	.bDescriptorType = USB_DT_DEVICE,
@@ -52,6 +63,7 @@ static struct usb_device_descriptor device_desc = {
 	.idVendor = __constant_cpu_to_le16(CONFIG_G_DNL_VENDOR_NUM),
 	.idProduct = __constant_cpu_to_le16(CONFIG_G_DNL_PRODUCT_NUM),
 	.iProduct = STRING_PRODUCT,
+	.iSerialNumber = STRING_SERIAL,
 	.bNumConfigurations = 1,
 };
 
@@ -62,6 +74,7 @@ static struct usb_device_descriptor device_desc = {
 static struct usb_string g_dnl_string_defs[] = {
 	{.s = manufacturer},
 	{.s = product},
+	{.s = g_dnl_serial},
 	{ }		/* end of list */
 };
 
@@ -145,6 +158,13 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
 	g_dnl_string_defs[1].id = id;
 	device_desc.iProduct = id;
 
+	id = usb_string_id(cdev);
+	if (id < 0)
+		return id;
+
+	g_dnl_string_defs[2].id = id;
+	device_desc.iSerialNumber = id;
+
 	g_dnl_bind_fixup(&device_desc);
 	ret = g_dnl_config_register(cdev);
 	if (ret)
diff --git a/include/g_dnl.h b/include/g_dnl.h
index 2b2f11a..be3114f 100644
--- a/include/g_dnl.h
+++ b/include/g_dnl.h
@@ -13,6 +13,7 @@
 int g_dnl_bind_fixup(struct usb_device_descriptor *);
 int g_dnl_register(const char *s);
 void g_dnl_unregister(void);
+void g_dnl_set_serialnumber(char *);
 
 /* USB initialization declaration - board specific */
 void board_usb_init(void);
-- 
1.8.3.1

[U-Boot] [PATCH v2 4/5] usb, g_dnl: make bcdDevice value configurable

[Heiko Schocher]

add the possibility to set the bcdDevice number board specific.
Therefore the weak function g_dnl_get_board_bcd_device_number()
is introduced. Used on the siemens boards.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>

---
- changes for v2:
  add Acked-by from Lukasz Majewski
---
 drivers/usb/gadget/g_dnl.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
index 7a3d507..48cc6a3 100644
--- a/drivers/usb/gadget/g_dnl.c
+++ b/drivers/usb/gadget/g_dnl.c
@@ -136,6 +136,23 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev)
 	return 0;
 }
 
+__weak int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	return gcnum;
+}
+
+static int g_dnl_get_bcd_device_number(struct usb_composite_dev *cdev)
+{
+	struct usb_gadget *gadget = cdev->gadget;
+	int gcnum;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum > 0)
+		gcnum += 0x200;
+
+	return g_dnl_get_board_bcd_device_number(gcnum);
+}
+
 static int g_dnl_bind(struct usb_composite_dev *cdev)
 {
 	struct usb_gadget *gadget = cdev->gadget;
@@ -170,11 +187,9 @@ static int g_dnl_bind(struct usb_composite_dev *cdev)
 	if (ret)
 		goto error;
 
-	gcnum = usb_gadget_controller_number(gadget);
-
-	debug("gcnum: %d\n", gcnum);
+	gcnum = g_dnl_get_bcd_device_number(cdev);
 	if (gcnum >= 0)
-		device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum);
+		device_desc.bcdDevice = cpu_to_le16(gcnum);
 	else {
 		debug("%s: controller '%s' not recognized\n",
 			shortname, gadget->name);
-- 
1.8.3.1

[U-Boot] [PATCH v2 5/5] arm, am335x: update for the siemens boards

[Heiko Schocher]

From: Samuel Egli <samuel.egli@siemens.com>

- dxr2: define unused pins as input
- do not enable RTC32K OSC on dxr2 board
- update default environment
  - add splashpos=m,m to default environment, so splash screen is always
    centered.
  - adapt environment for bootcount feature
  - add altbootcmd to default environment
- rut: SPL add early reset pulse for eth-phy, maXTouch and display
- rut: display timing aenderungen
- siemens boards: adapt for background color = white
- add boutcount feature for the siemens boards
  store the bootcount in the environment, as we have no softreset
  save registers on this hardware. Use therefore the CONFIG_BOOTCOUNT_ENV
  bootcount driver.
- change spi mode from 3 to 0 for the lcd init
- add gpio pin for lcd reset with state 0 and add mdelay
- siemens boards: use own USB id's
- add dfu serial and device number for siemens boards
  Add for the siemens boards the possibility to define in dfu mode,
  the iSerialNumber and the bcdDevice fields in the USB Device
  descriptor.
- fix upgrade mechanism based on bootcount
  Correct location of saveenv and remove not active variable.

  Add CONFIG_BOOT_RETRY_TIME and CONFIG_RESET_TO_RETRY to
  reboot board in case of empty kernel partition. Without
  these defines an empty kernel partition leads to an
  abort of boot process and one remains in u-boot prompt.

- general cleanup of dxr2, pxm2 and rut boards
  all:
   * Remove net boot from bootcmd
     Ping can cause a crash on boards without ethernet phy.
     net_nfs command is used only for development

   * Add reset at the end of bootcmd
     In order to have an immediate reset of the boot when bootcmd
     fails, add reset at the end of bootcmd.

  rut:
   * add nand_img_size

  dxr2:
   * update nand_img_size

   * ddr3 timings updated with iocontrol property that can be
     modified via eeprom. New default parameters from software
     leveling with draco ES2.

Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Roger Meier <r.meier@siemens.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Matthias Michel <matthias.michel@siemens.com>
Cc: Tom Rini <trini@ti.com>

---
changes for v2:
- remove CONFIG_G_DNL_SERIAL_STRING
---
 board/siemens/common/factoryset.c      |  24 ++++-
 board/siemens/common/factoryset.h      |   2 +
 board/siemens/dxr2/board.c             |  11 +--
 board/siemens/dxr2/board.h             |   9 +-
 board/siemens/dxr2/mux.c               | 158 +++++++++++++++++++++++++++++++++
 board/siemens/pxm2/board.c             |   3 +-
 board/siemens/rut/board.c              |  51 +++++++++--
 include/configs/dxr2.h                 |  13 ++-
 include/configs/pxm2.h                 |   7 +-
 include/configs/rut.h                  |  10 ++-
 include/configs/siemens-am33x-common.h |  69 ++++++++++----
 11 files changed, 305 insertions(+), 52 deletions(-)

diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c
index eda9141..6638b9c 100644
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@@ -15,7 +15,8 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/unaligned.h>
 #include <net.h>
-#include <usbdescriptors.h>
+#include <errno.h>
+#include <g_dnl.h>
 #include "factoryset.h"
 
 #define EEPR_PG_SZ		0x80
@@ -224,8 +225,20 @@ int factoryset_read_eeprom(int i2c_addr)
 					MAX_STRING_LENGTH)) {
 		debug("display name: %s\n", factory_dat.disp_name);
 	}
-
 #endif
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+					(uchar *)"num", factory_dat.serial,
+					MAX_STRING_LENGTH)) {
+		debug("serial number: %s\n", factory_dat.serial);
+	}
+	if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+					(uchar *)"ver", buf,
+					MAX_STRING_LENGTH)) {
+		factory_dat.version = simple_strtoul((char *)buf,
+							    NULL, 16);
+		debug("version number: %d\n", factory_dat.version);
+	}
+
 	return 0;
 
 err:
@@ -279,6 +292,13 @@ int g_dnl_bind_fixup(struct usb_device_descriptor *dev)
 {
 	put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor);
 	put_unaligned(factory_dat.usb_product_id, &dev->idProduct);
+	g_dnl_set_serialnumber((char *)factory_dat.serial);
+
 	return 0;
 }
+
+int g_dnl_get_board_bcd_device_number(int gcnum)
+{
+	return factory_dat.version;
+}
 #endif /* defined(CONFIG_SPL_BUILD) */
diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h
index 445f384..4d6de10 100644
--- a/board/siemens/common/factoryset.h
+++ b/board/siemens/common/factoryset.h
@@ -18,6 +18,8 @@ struct factorysetcontainer {
 #if defined(CONFIG_VIDEO)
 	unsigned char disp_name[MAX_STRING_LENGTH];
 #endif
+	unsigned char serial[MAX_STRING_LENGTH];
+	int version;
 };
 
 int factoryset_read_eeprom(int i2c_addr);
diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c
index af9d84f..1773ab7 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/dxr2/board.c
@@ -38,11 +38,11 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_SPL_BUILD
 static struct dxr2_baseboard_id __attribute__((section(".data"))) settings;
-
+/* @303MHz-i0 */
 const struct ddr3_data ddr3_default = {
-	0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B,
-	0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2,
-	0x00000618,
+	0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4,
+	0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+	0x00000618, 0x0000014A,
 };
 
 static void set_default_ddr3_timings(void)
@@ -73,6 +73,7 @@ static void print_ddr3_timings(void)
 
 	PRINTARGS(sdram_config);
 	PRINTARGS(ref_ctrl);
+	PRINTARGS(ioctr_val);
 }
 
 static void print_chip_data(void)
@@ -168,7 +169,7 @@ struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
 	dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
 	dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
 
-	config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data,
+	config_ddr(DDR_PLL_FREQ, settings.ddr3.ioctr_val, &dxr2_ddr3_data,
 		   &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0);
 }
 
diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h
index 2be78fb..abf5432 100644
--- a/board/siemens/dxr2/board.h
+++ b/board/siemens/dxr2/board.h
@@ -22,11 +22,11 @@
 #define MAGIC_CHIP	0x50494843
 
 /* Automatic generated definition */
-/* Wed, 19 Jun 2013 10:57:48 +0200 */
-/* From file: draco/ddr3-data-micron.txt */
+/* Wed, 18 Sep 2013 18:58:27 +0200 */
+/* From file: draco/ddr3-data-micron-v2.txt */
 struct ddr3_data {
 	unsigned int magic;			/* 0x33524444 */
-	unsigned int version;			/* 0x56312e33 */
+	unsigned int version;			/* 0x56312e34 */
 	unsigned short int ddr3_sratio;		/* 0x0100 */
 	unsigned short int iclkout;		/* 0x0001 */
 	unsigned short int dt0rdsratio0;	/* 0x003A */
@@ -36,9 +36,10 @@ struct ddr3_data {
 	unsigned int sdram_tim1;		/* 0x0888A39B */
 	unsigned int sdram_tim2;		/* 0x26247FDA */
 	unsigned int sdram_tim3;		/* 0x501F821F */
-	unsigned short int emif_ddr_phy_ctlr_1;	/* 0x0006 */
+	unsigned int emif_ddr_phy_ctlr_1;	/* 0x00100206 */
 	unsigned int sdram_config;		/* 0x61C04AB2 */
 	unsigned int ref_ctrl;			/* 0x00000618 */
+	unsigned int ioctr_val;			/* 0x0000018B */
 };
 
 struct chip_data {
diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c
index bc80b79..5c22999 100644
--- a/board/siemens/dxr2/mux.c
+++ b/board/siemens/dxr2/mux.c
@@ -63,6 +63,164 @@ static struct module_pin_mux gpios_pin_mux[] = {
 	{OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
 	{OFFSET(gpmc_csn3), MODE(7) },			/* LED0 GPIO2_0 */
 	{OFFSET(emu0), MODE(7)},			/* LED1 GPIO3_7 */
+	/* Triacs in HW Rev 2 */
+	{OFFSET(uart1_ctsn), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y5 GPIO0_12*/
+	{OFFSET(mmc0_dat1), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y3 GPIO2_28*/
+	{OFFSET(mmc0_dat2), MODE(7) | PULLUDDIS | RXACTIVE},	/* Y7 GPIO2_27*/
+	/* Triacs initial HW Rev */
+	{OFFSET(gpmc_csn1), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_30 Y0 */
+	{OFFSET(gpmc_be1n), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_28 Y1 */
+	{OFFSET(gpmc_csn2), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_31 Y2 */
+	{OFFSET(lcd_data15), MODE(7) | RXACTIVE | PULLUDDIS},	/* 0_11 Y3 */
+	{OFFSET(lcd_data14), MODE(7) | RXACTIVE | PULLUDDIS},	/* 0_10 Y4 */
+	{OFFSET(gpmc_clk), MODE(7) | RXACTIVE | PULLUDDIS},	/* 2_1  Y5 */
+	{OFFSET(emu1), MODE(7) | RXACTIVE | PULLUDDIS},		/* 3_8  Y6 */
+	{OFFSET(gpmc_ad15), MODE(7) | RXACTIVE | PULLUDDIS},	/* 1_15 Y7 */
+	/* Remaining pins that were not used in this file */
+	{OFFSET(gpmc_ad8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_ad9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_data9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_vsync), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_hsync), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_pclk), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(lcd_ac_bias_en), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_dat3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_dat0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_clk), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mmc0_cmd), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_sclk), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(spi0_cs0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart1_rtsn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart1_rxd), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(uart1_txd), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_aclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_fsx), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_axr0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_ahclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_aclkr), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_fsr), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_axr1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(mcasp0_ahclkx), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(xdma_event_intr0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(xdma_event_intr1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(nresetin_out), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(porz), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(nnmi), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc0_in), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc0_out), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(rsvd1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tms), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tdi), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tdo), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(tck), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ntrst), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc1_in), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(osc1_out), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(pmic_power_en), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(rtc_porz), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(rsvd2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ext_wakeup), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(enz_kaldo_1p8v), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_id), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb0_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_dm), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_dp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_ce), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_id), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_vbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(usb1_drvvbus), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_resetn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_csn0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_cke), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ck), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_nck), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_casn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_rasn), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_wen), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ba0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ba1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_ba2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a10), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a11), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a12), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a13), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a14), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_a15), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_odt), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d8), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d9), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d10), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d11), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d12), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d13), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d14), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_d15), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqm0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqm1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqs0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqsn0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqs1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_dqsn1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_vref), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_vtp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_strben0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ddr_strben1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain7), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain6), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain5), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain4), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain3), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain2), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain1), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(ain0), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
+	{OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
 	{-1},
 };
 
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 2c1841f..094b4d6 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -413,8 +413,7 @@ static int conf_disp_pll(int m, int n)
 
 static int board_video_init(void)
 {
-	/* set 300 MHz */
-	conf_disp_pll(25, 2);
+	conf_disp_pll(24, 1);
 	if (factory_dat.pxm50)
 		da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp);
 	else
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 5de8fc6..0cf17ef 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -83,9 +83,48 @@ struct cmd_control rut_ddr3_cmd_ctrl_data = {
 		   &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0);
 }
 
+static int request_and_pulse_reset(int gpio, const char *name)
+{
+	int ret;
+	const int delay_us = 2000; /* 2ms */
+
+	ret = gpio_request(gpio, name);
+	if (ret < 0) {
+		printf("%s: Unable to request %s\n", __func__, name);
+		goto err;
+	}
+
+	ret = gpio_direction_output(gpio, 0);
+	if (ret < 0) {
+		printf("%s: Unable to set %s  as output\n", __func__, name);
+		goto err_free_gpio;
+	}
+
+	udelay(delay_us);
+
+	gpio_set_value(gpio, 1);
+
+	return 0;
+
+err_free_gpio:
+	gpio_free(gpio);
+err:
+	return ret;
+}
+
+#define GPIO_TO_PIN(bank, gpio)		(32 * (bank) + (gpio))
+#define ETH_PHY_RESET_GPIO		GPIO_TO_PIN(2, 18)
+#define MAXTOUCH_RESET_GPIO		GPIO_TO_PIN(3, 18)
+#define DISPLAY_RESET_GPIO		GPIO_TO_PIN(3, 19)
+
+#define REQUEST_AND_PULSE_RESET(N) \
+		request_and_pulse_reset(N, #N);
+
 static void spl_siemens_board_init(void)
 {
-	return;
+	REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
+	REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
+	REQUEST_AND_PULSE_RESET(DISPLAY_RESET_GPIO);
 }
 #endif /* if def CONFIG_SPL_BUILD */
 
@@ -336,7 +375,6 @@ int clk_get(int clk)
 static int conf_disp_pll(int m, int n)
 {
 	struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
-	struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
 	struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1};
 #if defined(DISPL_PLL_SPREAD_SPECTRUM)
 	struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -353,8 +391,6 @@ static int conf_disp_pll(int m, int n)
 		0
 	};
 	do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
-	/* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */
-	writel(0x0, &cmdpll->clklcdcpixelclk);
 
 	do_setup_dpll(&dpll_lcd_regs, &dpll_lcd);
 
@@ -380,10 +416,13 @@ static int enable_lcd(void)
 {
 	unsigned char buf[1];
 
+	set_gpio(BOARD_LCD_RESET, 0);
+	mdelay(1);
 	set_gpio(BOARD_LCD_RESET, 1);
+	mdelay(1);
 
 	/* spi lcd init */
-	kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3);
+	kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_0);
 
 	/* backlight on */
 	buf[0] = 0xf;
@@ -418,7 +457,7 @@ static int board_video_init(void)
 		printf("%s: %s not found, using default %s\n", __func__,
 		       factory_dat.disp_name, lcd_panels[i].name);
 	}
-	conf_disp_pll(25, 2);
+	conf_disp_pll(24, 1);
 	da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display],
 			 lcd_cfgs[display].bpp);
 
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h
index cd553ec..1e42f5c 100644
--- a/include/configs/dxr2.h
+++ b/include/configs/dxr2.h
@@ -21,8 +21,8 @@
 
 #define CONFIG_SYS_MPUCLK	275
 #define DXR2_IOCTRL_VAL	0x18b
-#define DDR_PLL_FREQ	266
-#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K
+#define DDR_PLL_FREQ	303
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #define BOARD_DFU_BUTTON_GPIO	27
 #define BOARD_DFU_BUTTON_LED	64
@@ -62,7 +62,7 @@
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"hostname=dxr2\0" \
-	"nand_img_size=0x300000\0" \
+	"nand_img_size=0x400000\0" \
 	"optargs=\0" \
 	CONFIG_COMMON_ENV_SETTINGS
 
@@ -75,10 +75,9 @@
 	"run dfu_start; " \
 	"reset; " \
 "fi;" \
-"if ping ${serverip}; then " \
-	"run net_nfs; " \
-"fi;" \
-"run nand_boot;"
+"run nand_boot;" \
+"reset;"
+
 
 #else
 #define CONFIG_BOOTDELAY		0
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 20b0f9a..7722f7b 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -70,6 +70,7 @@
 	"hostname=pxm2\0" \
 	"nand_img_size=0x500000\0" \
 	"optargs=\0" \
+	"splashpos=m,m\0"	\
 	CONFIG_COMMON_ENV_SETTINGS \
 	"mmc_dev=0\0" \
 	"mmc_root=/dev/mmcblk0p2 rw\0" \
@@ -118,9 +119,7 @@
 		"fi;" \
 	"fi;" \
 	"run nand_boot;" \
-	"if ping ${serverip}; then " \
-		"run net_nfs; " \
-	"fi; "
+	"reset;"
 
 #else
 #define CONFIG_BOOTDELAY		0
@@ -148,6 +147,8 @@
 #define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
 #define PWM_TICKS	0x1388
 #define PWM_DUTY	0x200
+#define CONFIG_SYS_CONSOLE_BG_COL	0xff
+#define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
 #endif	/* ! __CONFIG_PXM2_H */
diff --git a/include/configs/rut.h b/include/configs/rut.h
index 7c94644..d4519f9 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -65,7 +65,8 @@
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"hostname=rut\0" \
-	"splashpos=488,352\0" \
+	"nand_img_size=0x500000\0" \
+	"splashpos=m,m\0" \
 	"optargs=fixrtc --no-log consoleblank=0 \0" \
 	CONFIG_COMMON_ENV_SETTINGS \
 	"mmc_dev=0\0" \
@@ -111,9 +112,7 @@
 		"fi;" \
 	"fi;" \
 	"run nand_boot;" \
-	"if ping ${serverip}; then " \
-		"run net_nfs; " \
-	"fi; "
+	"reset;"
 
 #else
 #define CONFIG_BOOTDELAY		0
@@ -151,6 +150,9 @@
 #define BOARD_LCD_RESET		115	/* Bank 3 pin 19 */
 #define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_FORMIKE
+#define DISPL_PLL_SPREAD_SPECTRUM
+#define CONFIG_SYS_CONSOLE_BG_COL	0xff
+#define CONFIG_SYS_CONSOLE_FG_COL	0x00
 #endif
 
 #endif	/* ! __CONFIG_RUT_H */
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 03c143d..832dc34 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -255,11 +255,11 @@
 #define CONFIG_USB_GADGET
 #define CONFIG_USBDOWNLOAD_GADGET
 
-/* USB TI's IDs */
+/* USB DRACO ID as default */
 #define CONFIG_USBD_HS
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0x4a47
-#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0908
+#define CONFIG_G_DNL_PRODUCT_NUM 0x02d2
+#define CONFIG_G_DNL_MANUFACTURER "Siemens AG"
 
 /* USB Device Firmware Update support */
 #define CONFIG_DFU_FUNCTION
@@ -359,31 +359,38 @@
 #define CONFIG_COMMON_ENV_SETTINGS \
 	"verify=no \0" \
 	"project_dir=systemone\0" \
+	"upgrade_available=0\0" \
+	"altbootcmd=run bootcmd\0" \
+	"bootlimit=3\0" \
+	"partitionset_active=A\0" \
 	"loadaddr=0x82000000\0" \
 	"kloadaddr=0x81000000\0" \
 	"script_addr=0x81900000\0" \
-	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8\0" \
-	"active_set=a\0" \
+	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 	"nand_active_ubi_vol=rootfs_a\0" \
+	"nand_active_ubi_vol_A=rootfs_a\0" \
+	"nand_active_ubi_vol_B=rootfs_b\0" \
 	"nand_root_fs_type=ubifs rootwait=1\0" \
 	"nand_src_addr=0x280000\0" \
-	"nand_src_addr_a=0x280000\0" \
-	"nand_src_addr_b=0x780000\0" \
+	"nand_src_addr_A=0x280000\0" \
+	"nand_src_addr_B=0x780000\0" \
 	"nfsopts=nolock rw mem=128M\0" \
 	"ip_method=none\0" \
 	"bootenv=uEnv.txt\0" \
 	"bootargs_defaults=setenv bootargs " \
 		"console=${console} " \
+		"${testargs} " \
 		"${optargs}\0" \
 	"nand_args=run bootargs_defaults;" \
 		"mtdparts default;" \
-		"setenv nand_active_ubi_vol rootfs_${active_set};" \
-		"setenv ${active_set} true;" \
-		"if test -n ${a}; then " \
-			"setenv nand_src_addr ${nand_src_addr_a};" \
+		"setenv ${partitionset_active} true;" \
+		"if test -n ${A}; then " \
+			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
+			"setenv nand_src_addr ${nand_src_addr_A};" \
 		"fi;" \
-		"if test -n ${b}; then " \
-			"setenv nand_src_addr ${nand_src_addr_b};" \
+		"if test -n ${B}; then " \
+			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
+			"setenv nand_src_addr ${nand_src_addr_B};" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 		"ubi.mtd=9,2048;" \
@@ -404,9 +411,26 @@
 		"setenv bootargs ${bootargs} " \
 		"root=/dev/nfs ${mtdparts} " \
 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
-		"addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \
+		"ip=${ipaddr}:${serverip}:" \
 		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
-	"nand_boot=echo Booting from nand, active set ${active_set} ...; " \
+	"nand_boot=echo Booting from nand; " \
+		"if test ${upgrade_available} -eq 1; then " \
+			"if test ${bootcount} -gt ${bootlimit}; " \
+				"then " \
+				"setenv upgrade_available 0;" \
+				"setenv ${partitionset_active} true;" \
+				"if test -n ${A}; then " \
+					"setenv partitionset_active B; " \
+					"env delete A; " \
+				"fi;" \
+				"if test -n ${B}; then " \
+					"setenv partitionset_active A; " \
+					"env delete B; " \
+				"fi;" \
+				"saveenv; " \
+			"fi;" \
+		"fi;" \
+		"echo set ${partitionset_active}...;" \
 		"run nand_args; " \
 		"nand read.i ${kloadaddr} ${nand_src_addr} " \
 		"${nand_img_size}; bootm ${kloadaddr}\0" \
@@ -415,7 +439,7 @@
 		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 		"bootm ${kloadaddr}\0" \
 	"flash_self=run nand_boot\0" \
-	"flash_self_test=setenv bootargs_defaults ${bootargs_defaults} test; " \
+	"flash_self_test=setenv testargs test; " \
 		"run nand_boot\0" \
 	"dfu_start=echo Preparing for dfu mode ...; " \
 		"run dfu_args; \0" \
@@ -426,8 +450,9 @@
 		"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 		"from memory and root filesystem over NFS; echo Type " \
 		"'run net_nfs' to get Kernel over TFTP and mount root " \
-		"filesystem over NFS; echo Set active_set variable to 'a' " \
-		"or 'b' to select kernel and rootfs partition; " \
+		"filesystem over NFS; " \
+		"echo Set partitionset_active variable to 'A' " \
+		"or 'B' to select kernel and rootfs partition; " \
 		"echo" \
 		"\0"
 
@@ -457,4 +482,10 @@
 #define CONFIG_AUTOBOOT_PROMPT	"Autobooting in %d seconds, "		\
 				"press \"<Esc><Esc>\" to stop\n", bootdelay
 
+/* Reboot after 60 sec if bootcmd fails */
+#define CONFIG_RESET_TO_RETRY
+#define CONFIG_BOOT_RETRY_TIME 60
+
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_BOOTCOUNT_ENV
 #endif	/* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
-- 
1.8.3.1

[U-Boot] [PATCH v2 3/5] usb, g_dnl: make iSerialNumber board configurable

[Lukasz Majewski]

Hi Heiko,

> add the possibility to set the iSerialNumber board specific.
> Default value for iSerialNumber is 0x0. This value can
> changed board specific through the new function
> g_dnl_set_serialnumber() which must be called from the
> board specific function g_dnl_bind_fixup().
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Cc: Marek Vasut <marek.vasut@gmail.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> 

I tried to apply the patch to the newest origin/master (SHA1:
509dca7a11aad394d781a9d31a7bfa6692562741).

Unfortunately it failed due to some previous patches applied to g_dnl.c
file.

Please rebase on top of origin/master

> ---
> changes for v2:
> - as Lukasz Majewski suggested, remove CONFIG_G_DNL_SERIAL_STRING
>   define
> ---
>  drivers/usb/gadget/g_dnl.c | 20 ++++++++++++++++++++
>  include/g_dnl.h            |  1 +
>  2 files changed, 21 insertions(+)
> 
> diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c
> index 40868c0..7a3d507 100644
> --- a/drivers/usb/gadget/g_dnl.c
> +++ b/drivers/usb/gadget/g_dnl.c
> @@ -32,6 +32,9 @@
>  #define STRING_PRODUCT 2
>  /* Index of String Descriptor describing this configuration */
>  #define STRING_USBDOWN 2
> +/* Index of String serial */
> +#define STRING_SERIAL  3
> +#define MAX_STRING_SERIAL	32
>  /* Number of supported configurations */
>  #define CONFIGURATION_NUMBER 1
>  
> @@ -39,8 +42,16 @@
>  
>  static const char shortname[] = "usb_dnl_";
>  static const char product[] = "USB download gadget";
> +static char g_dnl_serial[MAX_STRING_SERIAL];
>  static const char manufacturer[] = CONFIG_G_DNL_MANUFACTURER;
>  
> +void g_dnl_set_serialnumber(char *s)
> +{
> +	memset(g_dnl_serial, 0, MAX_STRING_SERIAL);
> +	if (strlen(s) < MAX_STRING_SERIAL)
> +		strncpy(g_dnl_serial, s, strlen(s));
> +}
> +
>  static struct usb_device_descriptor device_desc = {
>  	.bLength = sizeof device_desc,
>  	.bDescriptorType = USB_DT_DEVICE,
> @@ -52,6 +63,7 @@ static struct usb_device_descriptor device_desc = {
>  	.idVendor = __constant_cpu_to_le16(CONFIG_G_DNL_VENDOR_NUM),
>  	.idProduct =
> __constant_cpu_to_le16(CONFIG_G_DNL_PRODUCT_NUM), .iProduct =
> STRING_PRODUCT,
> +	.iSerialNumber = STRING_SERIAL,
>  	.bNumConfigurations = 1,
>  };
>  
> @@ -62,6 +74,7 @@ static struct usb_device_descriptor device_desc = {
>  static struct usb_string g_dnl_string_defs[] = {
>  	{.s = manufacturer},
>  	{.s = product},
> +	{.s = g_dnl_serial},
>  	{ }		/* end of list */
>  };
>  
> @@ -145,6 +158,13 @@ static int g_dnl_bind(struct usb_composite_dev
> *cdev) g_dnl_string_defs[1].id = id;
>  	device_desc.iProduct = id;
>  
> +	id = usb_string_id(cdev);
> +	if (id < 0)
> +		return id;
> +
> +	g_dnl_string_defs[2].id = id;
> +	device_desc.iSerialNumber = id;
> +
>  	g_dnl_bind_fixup(&device_desc);
>  	ret = g_dnl_config_register(cdev);
>  	if (ret)
> diff --git a/include/g_dnl.h b/include/g_dnl.h
> index 2b2f11a..be3114f 100644
> --- a/include/g_dnl.h
> +++ b/include/g_dnl.h
> @@ -13,6 +13,7 @@
>  int g_dnl_bind_fixup(struct usb_device_descriptor *);
>  int g_dnl_register(const char *s);
>  void g_dnl_unregister(void);
> +void g_dnl_set_serialnumber(char *);
>  
>  /* USB initialization declaration - board specific */
>  void board_usb_init(void);



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Vaibhav Bedia]

Hi Heiko,

On Mon, Nov 4, 2013 at 2:02 AM, Heiko Schocher <hs@denx.de> wrote:
> Patch 1 introduces bootcount support for the 3 siemens boards. As there
> is no other possibility on this boards, the bootcounter is stored in the
> environment. To prevent a "saveenv" on all reboots, a "upgrade_available"
> U-Boot Environment variable is introduced.
>

I must be missing something here but as commented on v1 [1], could you
clarify why the scratchpad register in RTC that should be persistent
is not used?

Regards,
Vaibhav

[1] http://www.mail-archive.com/u-boot at lists.denx.de/msg124429.html

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Heiko Schocher]

Hello Bedia,

Am 04.11.2013 13:45, schrieb Vaibhav Bedia:
> Hi Heiko,
>
> On Mon, Nov 4, 2013 at 2:02 AM, Heiko Schocher<hs@denx.de>  wrote:
>> Patch 1 introduces bootcount support for the 3 siemens boards. As there
>> is no other possibility on this boards, the bootcounter is stored in the
>> environment. To prevent a "saveenv" on all reboots, a "upgrade_available"
>> U-Boot Environment variable is introduced.
>>
>
> I must be missing something here but as commented on v1 [1], could you
> clarify why the scratchpad register in RTC that should be persistent
> is not used?
>
> Regards,
> Vaibhav
>
> [1] http://www.mail-archive.com/u-boot at lists.denx.de/msg124429.html

Hups, missed this EMail ... :-(

Hmm.. some boards from siemens do not use the RTC, so this approach
is not possible here ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Vaibhav Bedia]

On Mon, Nov 4, 2013 at 8:15 AM, Heiko Schocher <hs@denx.de> wrote:
[...]
> Hups, missed this EMail ... :-(
>

No problem. Happens all the time :)

> Hmm.. some boards from siemens do not use the RTC, so this approach
> is not possible here ...
>

By unused do you mean it's not powered up or is it simply not programmed?

Even if the RTC is not programmed the register would still be there. I
don't have a
board with me to check the behavior but i am guessing the RTC
functionality doesn't
need to be used to make use of the scratchpad registers.

Regards,
Vaibhav

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Marek Vasut]

Dear Vaibhav Bedia,

> On Mon, Nov 4, 2013 at 8:15 AM, Heiko Schocher <hs@denx.de> wrote:
> [...]
> 
> > Hups, missed this EMail ... :-(
> 
> No problem. Happens all the time :)
> 
> > Hmm.. some boards from siemens do not use the RTC, so this approach
> > is not possible here ...
> 
> By unused do you mean it's not powered up or is it simply not programmed?
> 
> Even if the RTC is not programmed the register would still be there. I
> don't have a
> board with me to check the behavior but i am guessing the RTC
> functionality doesn't
> need to be used to make use of the scratchpad registers.

If your hardware's IP block's clock are not ungated, the register access to that 
IP block will usually not work.

Best regards,
Marek Vasut

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Vaibhav Bedia]

Hi Marek,

On Mon, Nov 4, 2013 at 12:34 PM, Marek Vasut <marex@denx.de> wrote:
> Dear Vaibhav Bedia,
>
>> On Mon, Nov 4, 2013 at 8:15 AM, Heiko Schocher <hs@denx.de> wrote:
>> [...]
>>
>> > Hups, missed this EMail ... :-(
>>
>> No problem. Happens all the time :)
>>
>> > Hmm.. some boards from siemens do not use the RTC, so this approach
>> > is not possible here ...
>>
>> By unused do you mean it's not powered up or is it simply not programmed?
>>
>> Even if the RTC is not programmed the register would still be there. I
>> don't have a
>> board with me to check the behavior but i am guessing the RTC
>> functionality doesn't
>> need to be used to make use of the scratchpad registers.
>
> If your hardware's IP block's clock are not ungated, the register access to that
> IP block will usually not work.
>
Yes, i understand that. However, in this case AFAICT the interface clock
is always present and hence it should be possible to use the RTC registers.
Moreover, i just noticed Tom applied a bootcount patch for AM335x [1] which
does use the scratchpad register that i am pointing to. So unless there's
some other board level difference that i am missing it should work.

Regards,
Vaibhav

[1] http://lists.denx.de/pipermail/u-boot/2013-August/161593.html

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Heiko Schocher]

Hello Vaibhav Bedia,

Am 04.11.2013 20:45, schrieb Vaibhav Bedia:
> Hi Marek,
>
> On Mon, Nov 4, 2013 at 12:34 PM, Marek Vasut<marex@denx.de>  wrote:
>> Dear Vaibhav Bedia,
>>
>>> On Mon, Nov 4, 2013 at 8:15 AM, Heiko Schocher<hs@denx.de>  wrote:
>>> [...]
>>>
>>>> Hups, missed this EMail ... :-(
>>>
>>> No problem. Happens all the time :)
>>>
>>>> Hmm.. some boards from siemens do not use the RTC, so this approach
>>>> is not possible here ...
>>>
>>> By unused do you mean it's not powered up or is it simply not programmed?
>>>
>>> Even if the RTC is not programmed the register would still be there. I
>>> don't have a
>>> board with me to check the behavior but i am guessing the RTC
>>> functionality doesn't
>>> need to be used to make use of the scratchpad registers.
>>
>> If your hardware's IP block's clock are not ungated, the register access to that
>> IP block will usually not work.
>>
> Yes, i understand that. However, in this case AFAICT the interface clock
> is always present and hence it should be possible to use the RTC registers.
> Moreover, i just noticed Tom applied a bootcount patch for AM335x [1] which
> does use the scratchpad register that i am pointing to. So unless there's
> some other board level difference that i am missing it should work.

We see for example on the dxr2 board, that we cannot access the RTC
registers ... also, they use it on other boards without RTC and all
siemens boards should have the same manner.

There is also a possibility to disable the RTC on am335x based boards,
see:

http://processors.wiki.ti.com/index.php/AM335x_Schematic_Checklist#RTC

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[U-Boot] [PATCH v2 0/5] arm, am33xx: update for the am33xx based siemens boards

[Vaibhav Bedia]

Hi Heiko,

On Mon, Nov 4, 2013 at 10:30 PM, Heiko Schocher <hs@denx.de> wrote:
> Hello Vaibhav Bedia,
>
> Am 04.11.2013 20:45, schrieb Vaibhav Bedia:
>
>> Hi Marek,
>>
>> On Mon, Nov 4, 2013 at 12:34 PM, Marek Vasut<marex@denx.de>  wrote:
>>>
>>> Dear Vaibhav Bedia,
>>>
>>>> On Mon, Nov 4, 2013 at 8:15 AM, Heiko Schocher<hs@denx.de>  wrote:
>>>> [...]
>>>>
>>>>> Hups, missed this EMail ... :-(
>>>>
>>>>
>>>> No problem. Happens all the time :)
>>>>
>>>>> Hmm.. some boards from siemens do not use the RTC, so this approach
>>>>> is not possible here ...
>>>>
>>>>
>>>> By unused do you mean it's not powered up or is it simply not
>>>> programmed?
>>>>
>>>> Even if the RTC is not programmed the register would still be there. I
>>>> don't have a
>>>> board with me to check the behavior but i am guessing the RTC
>>>> functionality doesn't
>>>> need to be used to make use of the scratchpad registers.
>>>
>>>
>>> If your hardware's IP block's clock are not ungated, the register access
>>> to that
>>> IP block will usually not work.
>>>
>> Yes, i understand that. However, in this case AFAICT the interface clock
>> is always present and hence it should be possible to use the RTC
>> registers.
>> Moreover, i just noticed Tom applied a bootcount patch for AM335x [1]
>> which
>> does use the scratchpad register that i am pointing to. So unless there's
>> some other board level difference that i am missing it should work.
>
>
> We see for example on the dxr2 board, that we cannot access the RTC
> registers ... also, they use it on other boards without RTC and all
> siemens boards should have the same manner.
>
> There is also a possibility to disable the RTC on am335x based boards,
> see:
>
> http://processors.wiki.ti.com/index.php/AM335x_Schematic_Checklist#RTC
>

Yeah, if the RTC is completely disabled as documented above then
the registers can't be accessed. In other cases i would expect the
register access to still work.

I just wanted to make sure that the usage of RTC for the bootcount
has been considered. With the recent changes by Tom at least the
other AM335x platforms use it so that's good.

If it's about keeping the approaches consistent on the Siemens boards
then i am fine with this.

Regards,
Vaibhav