* [PATCH] scsi: megaraid: cleanup formatting of megaraid
@ 2022-01-27 15:19 trix
2022-01-27 22:37 ` Finn Thain
2022-01-28 17:42 ` Bart Van Assche
0 siblings, 2 replies; 35+ messages in thread
From: trix @ 2022-01-27 15:19 UTC (permalink / raw)
To: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, ndesaulniers
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm, Tom Rix
From: Tom Rix <trix@redhat.com>
checkpatch reports several hundred formatting errors.
Run these files through clang-format and knock off
some of them.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/scsi/megaraid.c | 2026 ++++++++++++++++++---------------------
drivers/scsi/megaraid.h | 988 ++++++++++---------
2 files changed, 1417 insertions(+), 1597 deletions(-)
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index bf987f3a7f3f2..d8823ec3b6635 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -53,29 +53,34 @@
#define MEGARAID_MODULE_VERSION "2.00.4"
-MODULE_AUTHOR ("sju@lsil.com");
-MODULE_DESCRIPTION ("LSI Logic MegaRAID legacy driver");
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("sju@lsil.com");
+MODULE_DESCRIPTION("LSI Logic MegaRAID legacy driver");
+MODULE_LICENSE("GPL");
MODULE_VERSION(MEGARAID_MODULE_VERSION);
static DEFINE_MUTEX(megadev_mutex);
static unsigned int max_cmd_per_lun = DEF_CMD_PER_LUN;
module_param(max_cmd_per_lun, uint, 0);
-MODULE_PARM_DESC(max_cmd_per_lun, "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)");
+MODULE_PARM_DESC(
+ max_cmd_per_lun,
+ "Maximum number of commands which can be issued to a single LUN (default=DEF_CMD_PER_LUN=63)");
static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
module_param(max_sectors_per_io, ushort, 0);
-MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
-
+MODULE_PARM_DESC(
+ max_sectors_per_io,
+ "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
module_param(max_mbox_busy_wait, ushort, 0);
-MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
+MODULE_PARM_DESC(
+ max_mbox_busy_wait,
+ "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
-#define RDINDOOR(adapter) readl((adapter)->mmio_base + 0x20)
-#define RDOUTDOOR(adapter) readl((adapter)->mmio_base + 0x2C)
-#define WRINDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x20)
-#define WROUTDOOR(adapter,value) writel(value, (adapter)->mmio_base + 0x2C)
+#define RDINDOOR(adapter) readl((adapter)->mmio_base + 0x20)
+#define RDOUTDOOR(adapter) readl((adapter)->mmio_base + 0x2C)
+#define WRINDOOR(adapter, value) writel(value, (adapter)->mmio_base + 0x20)
+#define WROUTDOOR(adapter, value) writel(value, (adapter)->mmio_base + 0x2C)
/*
* Global variables
@@ -88,17 +93,17 @@ static struct proc_dir_entry *mega_proc_dir_entry;
/* For controller re-ordering */
static struct mega_hbas mega_hbas[MAX_CONTROLLERS];
-static long
-megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
+static long megadev_unlocked_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long arg);
/*
* The File Operations structure for the serial/ioctl interface of the driver
*/
static const struct file_operations megadev_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = megadev_unlocked_ioctl,
- .open = megadev_open,
- .llseek = noop_llseek,
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = megadev_unlocked_ioctl,
+ .open = megadev_open,
+ .llseek = noop_llseek,
};
/*
@@ -114,8 +119,7 @@ static u32 driver_ver = 0x02000000;
/* major number used by the device for character interface */
static int major;
-#define IS_RAID_CH(hba, ch) (((hba)->mega_ch_class >> (ch)) & 0x01)
-
+#define IS_RAID_CH(hba, ch) (((hba)->mega_ch_class >> (ch)) & 0x01)
/*
* Debug variable to print some diagnostic messages
@@ -128,22 +132,21 @@ static int trace_level;
*
* Allocates a 8 byte aligned memory for the handshake mailbox.
*/
-static int
-mega_setup_mailbox(adapter_t *adapter)
+static int mega_setup_mailbox(adapter_t *adapter)
{
- unsigned long align;
+ unsigned long align;
- adapter->una_mbox64 = dma_alloc_coherent(&adapter->dev->dev,
- sizeof(mbox64_t),
- &adapter->una_mbox64_dma,
- GFP_KERNEL);
+ adapter->una_mbox64 =
+ dma_alloc_coherent(&adapter->dev->dev, sizeof(mbox64_t),
+ &adapter->una_mbox64_dma, GFP_KERNEL);
+
+ if (!adapter->una_mbox64)
+ return -1;
- if( !adapter->una_mbox64 ) return -1;
-
adapter->mbox = &adapter->una_mbox64->mbox;
- adapter->mbox = (mbox_t *)((((unsigned long) adapter->mbox) + 15) &
- (~0UL ^ 0xFUL));
+ adapter->mbox = (mbox_t *)((((unsigned long)adapter->mbox) + 15) &
+ (~0UL ^ 0xFUL));
adapter->mbox64 = (mbox64_t *)(((unsigned long)adapter->mbox) - 8);
@@ -154,22 +157,21 @@ mega_setup_mailbox(adapter_t *adapter)
/*
* Register the mailbox if the controller is an io-mapped controller
*/
- if( adapter->flag & BOARD_IOMAP ) {
-
+ if (adapter->flag & BOARD_IOMAP) {
outb(adapter->mbox_dma & 0xFF,
- adapter->host->io_port + MBOX_PORT0);
+ adapter->host->io_port + MBOX_PORT0);
outb((adapter->mbox_dma >> 8) & 0xFF,
- adapter->host->io_port + MBOX_PORT1);
+ adapter->host->io_port + MBOX_PORT1);
outb((adapter->mbox_dma >> 16) & 0xFF,
- adapter->host->io_port + MBOX_PORT2);
+ adapter->host->io_port + MBOX_PORT2);
outb((adapter->mbox_dma >> 24) & 0xFF,
- adapter->host->io_port + MBOX_PORT3);
+ adapter->host->io_port + MBOX_PORT3);
outb(ENABLE_MBOX_BYTE,
- adapter->host->io_port + ENABLE_MBOX_REGION);
+ adapter->host->io_port + ENABLE_MBOX_REGION);
irq_ack(adapter);
@@ -179,7 +181,6 @@ mega_setup_mailbox(adapter_t *adapter)
return 0;
}
-
/*
* mega_query_adapter()
* @adapter - pointer to our soft state
@@ -187,14 +188,13 @@ mega_setup_mailbox(adapter_t *adapter)
* Issue the adapter inquiry commands to the controller and find out
* information and parameter about the devices attached
*/
-static int
-mega_query_adapter(adapter_t *adapter)
+static int mega_query_adapter(adapter_t *adapter)
{
- dma_addr_t prod_info_dma_handle;
- mega_inquiry3 *inquiry3;
- struct mbox_out mbox;
- u8 *raw_mbox = (u8 *)&mbox;
- int retval;
+ dma_addr_t prod_info_dma_handle;
+ mega_inquiry3 *inquiry3;
+ struct mbox_out mbox;
+ u8 *raw_mbox = (u8 *)&mbox;
+ int retval;
/* Initialize adapter inquiry mailbox */
@@ -210,23 +210,24 @@ mega_query_adapter(adapter_t *adapter)
inquiry3 = (mega_inquiry3 *)adapter->mega_buffer;
- raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
- raw_mbox[2] = NC_SUBOP_ENQUIRY3; /* i.e. 0x0F */
- raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; /* i.e. 0x02 */
+ raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
+ raw_mbox[2] = NC_SUBOP_ENQUIRY3; /* i.e. 0x0F */
+ raw_mbox[3] = ENQ3_GET_SOLICITED_FULL; /* i.e. 0x02 */
/* Issue a blocking command to the card */
if ((retval = issue_scb_block(adapter, raw_mbox))) {
/* the adapter does not support 40ld */
- mraid_ext_inquiry *ext_inq;
- mraid_inquiry *inq;
- dma_addr_t dma_handle;
+ mraid_ext_inquiry *ext_inq;
+ mraid_inquiry *inq;
+ dma_addr_t dma_handle;
ext_inq = dma_alloc_coherent(&adapter->dev->dev,
sizeof(mraid_ext_inquiry),
&dma_handle, GFP_KERNEL);
- if( ext_inq == NULL ) return -1;
+ if (ext_inq == NULL)
+ return -1;
inq = &ext_inq->raid_inq;
@@ -242,48 +243,45 @@ mega_query_adapter(adapter_t *adapter)
* mraid_inquiry structure
*/
mega_8_to_40ld(inq, inquiry3,
- (mega_product_info *)&adapter->product_info);
+ (mega_product_info *)&adapter->product_info);
- dma_free_coherent(&adapter->dev->dev,
- sizeof(mraid_ext_inquiry), ext_inq,
- dma_handle);
+ dma_free_coherent(&adapter->dev->dev, sizeof(mraid_ext_inquiry),
+ ext_inq, dma_handle);
- } else { /*adapter supports 40ld */
+ } else { /*adapter supports 40ld */
adapter->flag |= BOARD_40LD;
/*
* get product_info, which is static information and will be
* unchanged
*/
- prod_info_dma_handle = dma_map_single(&adapter->dev->dev,
- (void *)&adapter->product_info,
- sizeof(mega_product_info),
- DMA_FROM_DEVICE);
+ prod_info_dma_handle = dma_map_single(
+ &adapter->dev->dev, (void *)&adapter->product_info,
+ sizeof(mega_product_info), DMA_FROM_DEVICE);
mbox.xferaddr = prod_info_dma_handle;
- raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
- raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; /* i.e. 0x0E */
+ raw_mbox[0] = FC_NEW_CONFIG; /* i.e. mbox->cmd=0xA1 */
+ raw_mbox[2] = NC_SUBOP_PRODUCT_INFO; /* i.e. 0x0E */
if ((retval = issue_scb_block(adapter, raw_mbox)))
dev_warn(&adapter->dev->dev,
- "Product_info cmd failed with error: %d\n",
- retval);
+ "Product_info cmd failed with error: %d\n",
+ retval);
dma_unmap_single(&adapter->dev->dev, prod_info_dma_handle,
sizeof(mega_product_info), DMA_FROM_DEVICE);
}
-
/*
* kernel scans the channels from 0 to <= max_channel
*/
adapter->host->max_channel =
- adapter->product_info.nchannels + NVIRT_CHAN -1;
+ adapter->product_info.nchannels + NVIRT_CHAN - 1;
- adapter->host->max_id = 16; /* max targets per channel */
+ adapter->host->max_id = 16; /* max targets per channel */
- adapter->host->max_lun = 7; /* Up to 7 luns for non disk devices */
+ adapter->host->max_lun = 7; /* Up to 7 luns for non disk devices */
adapter->host->cmd_per_lun = max_cmd_per_lun;
@@ -291,7 +289,7 @@ mega_query_adapter(adapter_t *adapter)
adapter->max_cmds = adapter->product_info.max_commands;
- if(adapter->max_cmds > MAX_COMMANDS)
+ if (adapter->max_cmds > MAX_COMMANDS)
adapter->max_cmds = MAX_COMMANDS;
adapter->host->can_queue = adapter->max_cmds - 1;
@@ -310,32 +308,27 @@ mega_query_adapter(adapter_t *adapter)
sparse warnings. */
if (adapter->product_info.subsysvid == PCI_VENDOR_ID_HP) {
snprintf(adapter->fw_version, sizeof(adapter->fw_version),
- "%c%d%d.%d%d",
- adapter->product_info.fw_version[2],
- 0,
- adapter->product_info.fw_version[1] & 0x0f,
- 0,
+ "%c%d%d.%d%d", adapter->product_info.fw_version[2], 0,
+ adapter->product_info.fw_version[1] & 0x0f, 0,
adapter->product_info.fw_version[0] & 0x0f);
snprintf(adapter->bios_version, sizeof(adapter->fw_version),
- "%c%d%d.%d%d",
- adapter->product_info.bios_version[2],
- 0,
- adapter->product_info.bios_version[1] & 0x0f,
- 0,
+ "%c%d%d.%d%d", adapter->product_info.bios_version[2],
+ 0, adapter->product_info.bios_version[1] & 0x0f, 0,
adapter->product_info.bios_version[0] & 0x0f);
} else {
memcpy(adapter->fw_version,
- (char *)adapter->product_info.fw_version, 4);
+ (char *)adapter->product_info.fw_version, 4);
adapter->fw_version[4] = 0;
memcpy(adapter->bios_version,
- (char *)adapter->product_info.bios_version, 4);
+ (char *)adapter->product_info.bios_version, 4);
adapter->bios_version[4] = 0;
}
dev_notice(&adapter->dev->dev, "[%s:%s] detected %d logical drives\n",
- adapter->fw_version, adapter->bios_version, adapter->numldrv);
+ adapter->fw_version, adapter->bios_version,
+ adapter->numldrv);
/*
* Do we support extended (>10 bytes) cdbs
@@ -344,7 +337,6 @@ mega_query_adapter(adapter_t *adapter)
if (adapter->support_ext_cdb)
dev_notice(&adapter->dev->dev, "supports extended CDBs\n");
-
return 0;
}
@@ -354,10 +346,9 @@ mega_query_adapter(adapter_t *adapter)
*
* Runs through the list of pending requests.
*/
-static inline void
-mega_runpendq(adapter_t *adapter)
+static inline void mega_runpendq(adapter_t *adapter)
{
- if(!list_empty(&adapter->pending_list))
+ if (!list_empty(&adapter->pending_list))
__mega_runpendq(adapter);
}
@@ -370,9 +361,9 @@ mega_runpendq(adapter_t *adapter)
*/
static int megaraid_queue_lck(struct scsi_cmnd *scmd)
{
- adapter_t *adapter;
- scb_t *scb;
- int busy=0;
+ adapter_t *adapter;
+ scb_t *scb;
+ int busy = 0;
unsigned long flags;
adapter = (adapter_t *)scmd->device->host->hostdata;
@@ -403,14 +394,14 @@ static int megaraid_queue_lck(struct scsi_cmnd *scmd)
mega_runpendq(adapter);
busy = 0;
- out:
+out:
spin_unlock_irqrestore(&adapter->lock, flags);
return busy;
}
static DEF_SCSI_QCMD(megaraid_queue)
-/**
+ /**
* mega_allocate_scb()
* @adapter: pointer to our soft state
* @cmd: scsi command from the mid-layer
@@ -418,15 +409,14 @@ static DEF_SCSI_QCMD(megaraid_queue)
* Allocate a SCB structure. This is the central structure for controller
* commands.
*/
-static inline scb_t *
-mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
+ static inline scb_t *mega_allocate_scb(adapter_t *adapter,
+ struct scsi_cmnd *cmd)
{
struct list_head *head = &adapter->free_list;
- scb_t *scb;
+ scb_t *scb;
/* Unlink command from Free List */
- if( !list_empty(head) ) {
-
+ if (!list_empty(head)) {
scb = list_entry(head->next, scb_t, list);
list_del_init(head->next);
@@ -450,29 +440,27 @@ mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
* Calculate the logical drive number based on the information in scsi command
* and the channel number.
*/
-static inline int
-mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel)
+static inline int mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd,
+ int channel)
{
- int tgt;
- int ldrv_num;
+ int tgt;
+ int ldrv_num;
tgt = cmd->device->id;
-
- if ( tgt > adapter->this_id )
- tgt--; /* we do not get inquires for initiator id */
- ldrv_num = (channel * 15) + tgt;
+ if (tgt > adapter->this_id)
+ tgt--; /* we do not get inquires for initiator id */
+ ldrv_num = (channel * 15) + tgt;
/*
* If we have a logical drive with boot enabled, project it first
*/
- if( adapter->boot_ldrv_enabled ) {
- if( ldrv_num == 0 ) {
+ if (adapter->boot_ldrv_enabled) {
+ if (ldrv_num == 0) {
ldrv_num = adapter->boot_ldrv;
- }
- else {
- if( ldrv_num <= adapter->boot_ldrv ) {
+ } else {
+ if (ldrv_num <= adapter->boot_ldrv) {
ldrv_num--;
}
}
@@ -488,7 +476,7 @@ mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel)
* These is valid only for IO commands.
*/
- if (adapter->support_random_del && adapter->read_ldidmap )
+ if (adapter->support_random_del && adapter->read_ldidmap)
switch (cmd->cmnd[0]) {
case READ_6:
case WRITE_6:
@@ -513,18 +501,18 @@ mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd *cmd, int channel)
* We also re-order the logical drives and physical devices based on their
* boot settings.
*/
-static scb_t *
-mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
+static scb_t *mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd,
+ int *busy)
{
- mega_passthru *pthru;
- scb_t *scb;
- mbox_t *mbox;
- u32 seg;
- char islogical;
- int max_ldrv_num;
- int channel = 0;
- int target = 0;
- int ldrv_num = 0; /* logical drive number */
+ mega_passthru *pthru;
+ scb_t *scb;
+ mbox_t *mbox;
+ u32 seg;
+ char islogical;
+ int max_ldrv_num;
+ int channel = 0;
+ int target = 0;
+ int ldrv_num = 0; /* logical drive number */
/*
* We know what channels our logical drives are on - mega_find_card()
@@ -538,15 +526,14 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
* the physical devices on virtual channel which is obviously converted
* to actual channel on the HBA.
*/
- if( adapter->boot_pdrv_enabled ) {
- if( islogical ) {
+ if (adapter->boot_pdrv_enabled) {
+ if (islogical) {
/* logical channel */
channel = cmd->device->channel -
- adapter->product_info.nchannels;
- }
- else {
+ adapter->product_info.nchannels;
+ } else {
/* this is physical channel */
- channel = cmd->device->channel;
+ channel = cmd->device->channel;
target = cmd->device->id;
/*
@@ -554,29 +541,24 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
* exposed first IF both the channels are SCSI, then
* booting from the second channel is not allowed.
*/
- if( target == 0 ) {
+ if (target == 0) {
target = adapter->boot_pdrv_tgt;
- }
- else if( target == adapter->boot_pdrv_tgt ) {
+ } else if (target == adapter->boot_pdrv_tgt) {
target = 0;
}
}
- }
- else {
- if( islogical ) {
+ } else {
+ if (islogical) {
/* this is the logical channel */
- channel = cmd->device->channel;
- }
- else {
+ channel = cmd->device->channel;
+ } else {
/* physical channel */
- channel = cmd->device->channel - NVIRT_CHAN;
+ channel = cmd->device->channel - NVIRT_CHAN;
target = cmd->device->id;
}
}
-
- if(islogical) {
-
+ if (islogical) {
/* have just LUN 0 for each target on virtual channels */
if (cmd->device->lun) {
cmd->result = (DID_BAD_TARGET << 16);
@@ -586,26 +568,25 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
-
max_ldrv_num = (adapter->flag & BOARD_40LD) ?
- MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
+ MAX_LOGICAL_DRIVES_40LD :
+ MAX_LOGICAL_DRIVES_8LD;
/*
* max_ldrv_num increases by 0x80 if some logical drive was
* deleted.
*/
- if(adapter->read_ldidmap)
+ if (adapter->read_ldidmap)
max_ldrv_num += 0x80;
- if(ldrv_num > max_ldrv_num ) {
+ if (ldrv_num > max_ldrv_num) {
cmd->result = (DID_BAD_TARGET << 16);
scsi_done(cmd);
return NULL;
}
- }
- else {
- if( cmd->device->lun > 7) {
+ } else {
+ if (cmd->device->lun > 7) {
/*
* Do not support lun >7 for physically accessed
* devices
@@ -621,7 +602,7 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
* Logical drive commands
*
*/
- if(islogical) {
+ if (islogical) {
switch (cmd->cmnd[0]) {
case TEST_UNIT_READY:
#if MEGA_HAVE_CLUSTERING
@@ -629,13 +610,13 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
* Do we support clustering and is the support enabled
* If no, return success always
*/
- if( !adapter->has_cluster ) {
+ if (!adapter->has_cluster) {
cmd->result = (DID_OK << 16);
scsi_done(cmd);
return NULL;
}
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
+ if (!(scb = mega_allocate_scb(adapter, cmd))) {
*busy = 1;
return NULL;
}
@@ -671,19 +652,18 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
case READ_CAPACITY:
case INQUIRY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
-
+ if (!(adapter->flag & (1L << cmd->device->channel))) {
dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d "
- "for logical drives\n",
- adapter->host->host_no,
- cmd->device->channel);
+ "scsi%d: scanning scsi channel %d "
+ "for logical drives\n",
+ adapter->host->host_no,
+ cmd->device->channel);
adapter->flag |= (1L << cmd->device->channel);
}
/* Allocate a SCB and initialize passthru */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
+ if (!(scb = mega_allocate_scb(adapter, cmd))) {
*busy = 1;
return NULL;
}
@@ -701,17 +681,18 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
pthru->cdblen = cmd->cmd_len;
memcpy(pthru->cdb, cmd->cmnd, cmd->cmd_len);
- if( adapter->has_64bit_addr ) {
+ if (adapter->has_64bit_addr) {
mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
+ } else {
mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
}
scb->dma_direction = DMA_FROM_DEVICE;
- pthru->numsgelements = mega_build_sglist(adapter, scb,
- &pthru->dataxferaddr, &pthru->dataxferlen);
+ pthru->numsgelements =
+ mega_build_sglist(adapter, scb,
+ &pthru->dataxferaddr,
+ &pthru->dataxferlen);
mbox->m_out.xferaddr = scb->pthru_dma_addr;
@@ -725,7 +706,7 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
case WRITE_12:
/* Allocate a SCB and initialize mailbox */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
+ if (!(scb = mega_allocate_scb(adapter, cmd))) {
*busy = 1;
return NULL;
}
@@ -738,26 +719,25 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
* A little hack: 2nd bit is zero for all scsi read
* commands and is set for all scsi write commands
*/
- if( adapter->has_64bit_addr ) {
- mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE64:
- MEGA_MBOXCMD_LREAD64 ;
- }
- else {
+ if (adapter->has_64bit_addr) {
+ mbox->m_out.cmd =
+ (*cmd->cmnd & 0x02) ?
+ MEGA_MBOXCMD_LWRITE64 :
+ MEGA_MBOXCMD_LREAD64;
+ } else {
mbox->m_out.cmd = (*cmd->cmnd & 0x02) ?
- MEGA_MBOXCMD_LWRITE:
- MEGA_MBOXCMD_LREAD ;
+ MEGA_MBOXCMD_LWRITE :
+ MEGA_MBOXCMD_LREAD;
}
/*
* 6-byte READ(0x08) or WRITE(0x0A) cdb
*/
- if( cmd->cmd_len == 6 ) {
- mbox->m_out.numsectors = (u32) cmd->cmnd[4];
- mbox->m_out.lba =
- ((u32)cmd->cmnd[1] << 16) |
- ((u32)cmd->cmnd[2] << 8) |
- (u32)cmd->cmnd[3];
+ if (cmd->cmd_len == 6) {
+ mbox->m_out.numsectors = (u32)cmd->cmnd[4];
+ mbox->m_out.lba = ((u32)cmd->cmnd[1] << 16) |
+ ((u32)cmd->cmnd[2] << 8) |
+ (u32)cmd->cmnd[3];
mbox->m_out.lba &= 0x1FFFFF;
@@ -768,12 +748,12 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
* drive was deleted
*/
if (*cmd->cmnd == READ_6) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
+ adapter->nreads[ldrv_num % 0x80]++;
+ adapter->nreadblocks[ldrv_num % 0x80] +=
mbox->m_out.numsectors;
} else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
+ adapter->nwrites[ldrv_num % 0x80]++;
+ adapter->nwriteblocks[ldrv_num % 0x80] +=
mbox->m_out.numsectors;
}
#endif
@@ -782,24 +762,23 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
/*
* 10-byte READ(0x28) or WRITE(0x2A) cdb
*/
- if( cmd->cmd_len == 10 ) {
+ if (cmd->cmd_len == 10) {
mbox->m_out.numsectors =
(u32)cmd->cmnd[8] |
((u32)cmd->cmnd[7] << 8);
- mbox->m_out.lba =
- ((u32)cmd->cmnd[2] << 24) |
- ((u32)cmd->cmnd[3] << 16) |
- ((u32)cmd->cmnd[4] << 8) |
- (u32)cmd->cmnd[5];
+ mbox->m_out.lba = ((u32)cmd->cmnd[2] << 24) |
+ ((u32)cmd->cmnd[3] << 16) |
+ ((u32)cmd->cmnd[4] << 8) |
+ (u32)cmd->cmnd[5];
#if MEGA_HAVE_STATS
if (*cmd->cmnd == READ_10) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
+ adapter->nreads[ldrv_num % 0x80]++;
+ adapter->nreadblocks[ldrv_num % 0x80] +=
mbox->m_out.numsectors;
} else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
+ adapter->nwrites[ldrv_num % 0x80]++;
+ adapter->nwriteblocks[ldrv_num % 0x80] +=
mbox->m_out.numsectors;
}
#endif
@@ -808,12 +787,11 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
/*
* 12-byte READ(0xA8) or WRITE(0xAA) cdb
*/
- if( cmd->cmd_len == 12 ) {
- mbox->m_out.lba =
- ((u32)cmd->cmnd[2] << 24) |
- ((u32)cmd->cmnd[3] << 16) |
- ((u32)cmd->cmnd[4] << 8) |
- (u32)cmd->cmnd[5];
+ if (cmd->cmd_len == 12) {
+ mbox->m_out.lba = ((u32)cmd->cmnd[2] << 24) |
+ ((u32)cmd->cmnd[3] << 16) |
+ ((u32)cmd->cmnd[4] << 8) |
+ (u32)cmd->cmnd[5];
mbox->m_out.numsectors =
((u32)cmd->cmnd[6] << 24) |
@@ -823,12 +801,12 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
#if MEGA_HAVE_STATS
if (*cmd->cmnd == READ_12) {
- adapter->nreads[ldrv_num%0x80]++;
- adapter->nreadblocks[ldrv_num%0x80] +=
+ adapter->nreads[ldrv_num % 0x80]++;
+ adapter->nreadblocks[ldrv_num % 0x80] +=
mbox->m_out.numsectors;
} else {
- adapter->nwrites[ldrv_num%0x80]++;
- adapter->nwriteblocks[ldrv_num%0x80] +=
+ adapter->nwrites[ldrv_num % 0x80]++;
+ adapter->nwriteblocks[ldrv_num % 0x80] +=
mbox->m_out.numsectors;
}
#endif
@@ -837,16 +815,17 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
/*
* If it is a read command
*/
- if( (*cmd->cmnd & 0x0F) == 0x08 ) {
+ if ((*cmd->cmnd & 0x0F) == 0x08) {
scb->dma_direction = DMA_FROM_DEVICE;
- }
- else {
+ } else {
scb->dma_direction = DMA_TO_DEVICE;
}
/* Calculate Scatter-Gather info */
- mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
- (u32 *)&mbox->m_out.xferaddr, &seg);
+ mbox->m_out.numsgelements =
+ mega_build_sglist(adapter, scb,
+ (u32 *)&mbox->m_out.xferaddr,
+ &seg);
return scb;
@@ -857,22 +836,22 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
/*
* Do we support clustering and is the support enabled
*/
- if( ! adapter->has_cluster ) {
-
+ if (!adapter->has_cluster) {
cmd->result = (DID_BAD_TARGET << 16);
scsi_done(cmd);
return NULL;
}
/* Allocate a SCB and initialize mailbox */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
+ if (!(scb = mega_allocate_scb(adapter, cmd))) {
*busy = 1;
return NULL;
}
scb->raw_mbox[0] = MEGA_CLUSTER_CMD;
- scb->raw_mbox[2] = ( *cmd->cmnd == RESERVE ) ?
- MEGA_RESERVE_LD : MEGA_RELEASE_LD;
+ scb->raw_mbox[2] = (*cmd->cmnd == RESERVE) ?
+ MEGA_RESERVE_LD :
+ MEGA_RELEASE_LD;
scb->raw_mbox[3] = ldrv_num;
@@ -893,7 +872,7 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
*/
else {
/* Allocate a SCB and initialize passthru */
- if(!(scb = mega_allocate_scb(adapter, cmd))) {
+ if (!(scb = mega_allocate_scb(adapter, cmd))) {
*busy = 1;
return NULL;
}
@@ -901,38 +880,32 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
mbox = (mbox_t *)scb->raw_mbox;
memset(mbox, 0, sizeof(scb->raw_mbox));
- if( adapter->support_ext_cdb ) {
-
- mega_prepare_extpassthru(adapter, scb, cmd,
- channel, target);
+ if (adapter->support_ext_cdb) {
+ mega_prepare_extpassthru(adapter, scb, cmd, channel,
+ target);
mbox->m_out.cmd = MEGA_MBOXCMD_EXTPTHRU;
mbox->m_out.xferaddr = scb->epthru_dma_addr;
- }
- else {
-
+ } else {
pthru = mega_prepare_passthru(adapter, scb, cmd,
- channel, target);
+ channel, target);
/* Initialize mailbox */
- if( adapter->has_64bit_addr ) {
+ if (adapter->has_64bit_addr) {
mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU64;
- }
- else {
+ } else {
mbox->m_out.cmd = MEGA_MBOXCMD_PASSTHRU;
}
mbox->m_out.xferaddr = scb->pthru_dma_addr;
-
}
return scb;
}
return NULL;
}
-
/**
* mega_prepare_passthru()
* @adapter: pointer to our soft state
@@ -943,14 +916,14 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
*
* prepare a command for the scsi physical devices.
*/
-static mega_passthru *
-mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
- int channel, int target)
+static mega_passthru *mega_prepare_passthru(adapter_t *adapter, scb_t *scb,
+ struct scsi_cmnd *cmd, int channel,
+ int target)
{
mega_passthru *pthru;
pthru = scb->pthru;
- memset(pthru, 0, sizeof (mega_passthru));
+ memset(pthru, 0, sizeof(mega_passthru));
/* 0=6sec/1=60sec/2=10min/3=3hrs */
pthru->timeout = 2;
@@ -961,8 +934,8 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
- pthru->target = (adapter->flag & BOARD_40LD) ?
- (channel << 4) | target : target;
+ pthru->target =
+ (adapter->flag & BOARD_40LD) ? (channel << 4) | target : target;
pthru->cdblen = cmd->cmd_len;
pthru->logdrv = cmd->device->lun;
@@ -976,26 +949,25 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
switch (cmd->cmnd[0]) {
case INQUIRY:
case READ_CAPACITY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
-
+ if (!(adapter->flag & (1L << cmd->device->channel))) {
dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d [P%d] "
- "for physical devices\n",
- adapter->host->host_no,
- cmd->device->channel, channel);
+ "scsi%d: scanning scsi channel %d [P%d] "
+ "for physical devices\n",
+ adapter->host->host_no, cmd->device->channel,
+ channel);
adapter->flag |= (1L << cmd->device->channel);
}
fallthrough;
default:
- pthru->numsgelements = mega_build_sglist(adapter, scb,
- &pthru->dataxferaddr, &pthru->dataxferlen);
+ pthru->numsgelements =
+ mega_build_sglist(adapter, scb, &pthru->dataxferaddr,
+ &pthru->dataxferlen);
break;
}
return pthru;
}
-
/**
* mega_prepare_extpassthru()
* @adapter: pointer to our soft state
@@ -1007,12 +979,12 @@ mega_prepare_passthru(adapter_t *adapter, scb_t *scb, struct scsi_cmnd *cmd,
* prepare a command for the scsi physical devices. This rountine prepares
* commands for devices which can take extended CDBs (>10 bytes)
*/
-static mega_ext_passthru *
-mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb,
- struct scsi_cmnd *cmd,
- int channel, int target)
+static mega_ext_passthru *mega_prepare_extpassthru(adapter_t *adapter,
+ scb_t *scb,
+ struct scsi_cmnd *cmd,
+ int channel, int target)
{
- mega_ext_passthru *epthru;
+ mega_ext_passthru *epthru;
epthru = scb->epthru;
memset(epthru, 0, sizeof(mega_ext_passthru));
@@ -1025,8 +997,8 @@ mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb,
epthru->islogical = 0;
epthru->channel = (adapter->flag & BOARD_40LD) ? 0 : channel;
- epthru->target = (adapter->flag & BOARD_40LD) ?
- (channel << 4) | target : target;
+ epthru->target =
+ (adapter->flag & BOARD_40LD) ? (channel << 4) | target : target;
epthru->cdblen = cmd->cmd_len;
epthru->logdrv = cmd->device->lun;
@@ -1036,43 +1008,40 @@ mega_prepare_extpassthru(adapter_t *adapter, scb_t *scb,
/* Not sure about the direction */
scb->dma_direction = DMA_BIDIRECTIONAL;
- switch(cmd->cmnd[0]) {
+ switch (cmd->cmnd[0]) {
case INQUIRY:
case READ_CAPACITY:
- if(!(adapter->flag & (1L << cmd->device->channel))) {
-
+ if (!(adapter->flag & (1L << cmd->device->channel))) {
dev_notice(&adapter->dev->dev,
- "scsi%d: scanning scsi channel %d [P%d] "
- "for physical devices\n",
- adapter->host->host_no,
- cmd->device->channel, channel);
+ "scsi%d: scanning scsi channel %d [P%d] "
+ "for physical devices\n",
+ adapter->host->host_no, cmd->device->channel,
+ channel);
adapter->flag |= (1L << cmd->device->channel);
}
fallthrough;
default:
- epthru->numsgelements = mega_build_sglist(adapter, scb,
- &epthru->dataxferaddr, &epthru->dataxferlen);
+ epthru->numsgelements =
+ mega_build_sglist(adapter, scb, &epthru->dataxferaddr,
+ &epthru->dataxferlen);
break;
}
return epthru;
}
-static void
-__mega_runpendq(adapter_t *adapter)
+static void __mega_runpendq(adapter_t *adapter)
{
scb_t *scb;
struct list_head *pos, *next;
/* Issue any pending commands to the card */
- list_for_each_safe(pos, next, &adapter->pending_list) {
-
+ list_for_each_safe (pos, next, &adapter->pending_list) {
scb = list_entry(pos, scb_t, list);
- if( !(scb->state & SCB_ISSUED) ) {
-
- if( issue_scb(adapter, scb) != 0 )
+ if (!(scb->state & SCB_ISSUED)) {
+ if (issue_scb(adapter, scb) != 0)
return;
}
}
@@ -1080,7 +1049,6 @@ __mega_runpendq(adapter_t *adapter)
return;
}
-
/**
* issue_scb()
* @adapter: pointer to our soft state
@@ -1090,29 +1058,28 @@ __mega_runpendq(adapter_t *adapter)
* busy. We also take the scb from the pending list if the mailbox is
* available.
*/
-static int
-issue_scb(adapter_t *adapter, scb_t *scb)
+static int issue_scb(adapter_t *adapter, scb_t *scb)
{
- volatile mbox64_t *mbox64 = adapter->mbox64;
- volatile mbox_t *mbox = adapter->mbox;
- unsigned int i = 0;
+ volatile mbox64_t *mbox64 = adapter->mbox64;
+ volatile mbox_t *mbox = adapter->mbox;
+ unsigned int i = 0;
- if(unlikely(mbox->m_in.busy)) {
+ if (unlikely(mbox->m_in.busy)) {
do {
udelay(1);
i++;
- } while( mbox->m_in.busy && (i < max_mbox_busy_wait) );
+ } while (mbox->m_in.busy && (i < max_mbox_busy_wait));
- if(mbox->m_in.busy) return -1;
+ if (mbox->m_in.busy)
+ return -1;
}
/* Copy mailbox data into host structure */
- memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox,
- sizeof(struct mbox_out));
-
- mbox->m_out.cmdid = scb->idx; /* Set cmdid */
- mbox->m_in.busy = 1; /* Set busy */
+ memcpy((char *)&mbox->m_out, (char *)scb->raw_mbox,
+ sizeof(struct mbox_out));
+ mbox->m_out.cmdid = scb->idx; /* Set cmdid */
+ mbox->m_in.busy = 1; /* Set busy */
/*
* Increment the pending queue counter
@@ -1138,12 +1105,11 @@ issue_scb(adapter_t *adapter, scb_t *scb)
*/
scb->state |= SCB_ISSUED;
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
+ if (likely(adapter->flag & BOARD_MEMMAP)) {
mbox->m_in.poll = 0;
mbox->m_in.ack = 0;
WRINDOOR(adapter, adapter->mbox_dma | 0x1);
- }
- else {
+ } else {
irq_enable(adapter);
issue_command(adapter);
}
@@ -1154,8 +1120,7 @@ issue_scb(adapter_t *adapter, scb_t *scb)
/*
* Wait until the controller's mailbox is available
*/
-static inline int
-mega_busywait_mbox (adapter_t *adapter)
+static inline int mega_busywait_mbox(adapter_t *adapter)
{
if (adapter->mbox->m_in.busy)
return __mega_busywait_mbox(adapter);
@@ -1169,19 +1134,18 @@ mega_busywait_mbox (adapter_t *adapter)
*
* Issue a scb in synchronous and non-interrupt mode
*/
-static int
-issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
+static int issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
{
volatile mbox64_t *mbox64 = adapter->mbox64;
volatile mbox_t *mbox = adapter->mbox;
- u8 byte;
+ u8 byte;
/* Wait until mailbox is free */
- if(mega_busywait_mbox (adapter))
+ if (mega_busywait_mbox(adapter))
goto bug_blocked_mailbox;
/* Copy mailbox data into host structure */
- memcpy((char *) mbox, raw_mbox, sizeof(struct mbox_out));
+ memcpy((char *)mbox, raw_mbox, sizeof(struct mbox_out));
mbox->m_out.cmdid = 0xFE;
mbox->m_in.busy = 1;
@@ -1199,19 +1163,19 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
mbox64->xfer_segment_hi = 0;
}
- if( likely(adapter->flag & BOARD_MEMMAP) ) {
+ if (likely(adapter->flag & BOARD_MEMMAP)) {
mbox->m_in.poll = 0;
mbox->m_in.ack = 0;
mbox->m_in.numstatus = 0xFF;
mbox->m_in.status = 0xFF;
WRINDOOR(adapter, adapter->mbox_dma | 0x1);
- while((volatile u8)mbox->m_in.numstatus == 0xFF)
+ while ((volatile u8)mbox->m_in.numstatus == 0xFF)
cpu_relax();
mbox->m_in.numstatus = 0xFF;
- while( (volatile u8)mbox->m_in.poll != 0x77 )
+ while ((volatile u8)mbox->m_in.poll != 0x77)
cpu_relax();
mbox->m_in.poll = 0;
@@ -1219,10 +1183,9 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
WRINDOOR(adapter, adapter->mbox_dma | 0x2);
- while(RDINDOOR(adapter) & 0x2)
+ while (RDINDOOR(adapter) & 0x2)
cpu_relax();
- }
- else {
+ } else {
irq_disable(adapter);
issue_command(adapter);
@@ -1238,11 +1201,10 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
bug_blocked_mailbox:
dev_warn(&adapter->dev->dev, "Blocked mailbox......!!\n");
- udelay (1000);
+ udelay(1000);
return -1;
}
-
/**
* megaraid_isr_iomapped()
* @irq: irq
@@ -1252,17 +1214,15 @@ issue_scb_block(adapter_t *adapter, u_char *raw_mbox)
* Find out if our device is interrupting. If yes, acknowledge the interrupt
* and service the completed commands.
*/
-static irqreturn_t
-megaraid_isr_iomapped(int irq, void *devp)
+static irqreturn_t megaraid_isr_iomapped(int irq, void *devp)
{
- adapter_t *adapter = devp;
- unsigned long flags;
- u8 status;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- u8 byte;
- int handled = 0;
-
+ adapter_t *adapter = devp;
+ unsigned long flags;
+ u8 status;
+ u8 nstatus;
+ u8 completed[MAX_FIRMWARE_STATUS];
+ u8 byte;
+ int handled = 0;
/*
* loop till F/W has more commands for us to complete.
@@ -1272,7 +1232,7 @@ megaraid_isr_iomapped(int irq, void *devp)
do {
/* Check if a valid interrupt is pending */
byte = irq_state(adapter);
- if( (byte & VALID_INTR_BYTE) == 0 ) {
+ if ((byte & VALID_INTR_BYTE) == 0) {
/*
* No more pending commands
*/
@@ -1280,8 +1240,8 @@ megaraid_isr_iomapped(int irq, void *devp)
}
set_irq_state(adapter, byte);
- while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
- == 0xFF)
+ while ((nstatus = (volatile u8)adapter->mbox->m_in.numstatus) ==
+ 0xFF)
cpu_relax();
adapter->mbox->m_in.numstatus = 0xFF;
@@ -1292,8 +1252,8 @@ megaraid_isr_iomapped(int irq, void *devp)
*/
atomic_sub(nstatus, &adapter->pend_cmds);
- memcpy(completed, (void *)adapter->mbox->m_in.completed,
- nstatus);
+ memcpy(completed, (void *)adapter->mbox->m_in.completed,
+ nstatus);
/* Acknowledge interrupt */
irq_ack(adapter);
@@ -1305,20 +1265,19 @@ megaraid_isr_iomapped(int irq, void *devp)
handled = 1;
/* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
+ if (atomic_read(&adapter->quiescent) == 0) {
mega_runpendq(adapter);
}
- } while(1);
+ } while (1);
- out_unlock:
+out_unlock:
spin_unlock_irqrestore(&adapter->lock, flags);
return IRQ_RETVAL(handled);
}
-
/**
* megaraid_isr_memmapped()
* @irq: irq
@@ -1328,17 +1287,15 @@ megaraid_isr_iomapped(int irq, void *devp)
* Find out if our device is interrupting. If yes, acknowledge the interrupt
* and service the completed commands.
*/
-static irqreturn_t
-megaraid_isr_memmapped(int irq, void *devp)
+static irqreturn_t megaraid_isr_memmapped(int irq, void *devp)
{
- adapter_t *adapter = devp;
- unsigned long flags;
- u8 status;
- u32 dword = 0;
- u8 nstatus;
- u8 completed[MAX_FIRMWARE_STATUS];
- int handled = 0;
-
+ adapter_t *adapter = devp;
+ unsigned long flags;
+ u8 status;
+ u32 dword = 0;
+ u8 nstatus;
+ u8 completed[MAX_FIRMWARE_STATUS];
+ int handled = 0;
/*
* loop till F/W has more commands for us to complete.
@@ -1348,7 +1305,7 @@ megaraid_isr_memmapped(int irq, void *devp)
do {
/* Check if a valid interrupt is pending */
dword = RDOUTDOOR(adapter);
- if(dword != 0x10001234) {
+ if (dword != 0x10001234) {
/*
* No more pending commands
*/
@@ -1356,8 +1313,8 @@ megaraid_isr_memmapped(int irq, void *devp)
}
WROUTDOOR(adapter, 0x10001234);
- while((nstatus = (volatile u8)adapter->mbox->m_in.numstatus)
- == 0xFF) {
+ while ((nstatus = (volatile u8)adapter->mbox->m_in.numstatus) ==
+ 0xFF) {
cpu_relax();
}
adapter->mbox->m_in.numstatus = 0xFF;
@@ -1369,15 +1326,15 @@ megaraid_isr_memmapped(int irq, void *devp)
*/
atomic_sub(nstatus, &adapter->pend_cmds);
- memcpy(completed, (void *)adapter->mbox->m_in.completed,
- nstatus);
+ memcpy(completed, (void *)adapter->mbox->m_in.completed,
+ nstatus);
/* Acknowledge interrupt */
WRINDOOR(adapter, 0x2);
handled = 1;
- while( RDINDOOR(adapter) & 0x02 )
+ while (RDINDOOR(adapter) & 0x02)
cpu_relax();
mega_cmd_done(adapter, completed, nstatus, status);
@@ -1385,13 +1342,13 @@ megaraid_isr_memmapped(int irq, void *devp)
mega_rundoneq(adapter);
/* Loop through any pending requests */
- if(atomic_read(&adapter->quiescent) == 0) {
+ if (atomic_read(&adapter->quiescent) == 0) {
mega_runpendq(adapter);
}
- } while(1);
+ } while (1);
- out_unlock:
+out_unlock:
spin_unlock_irqrestore(&adapter->lock, flags);
@@ -1406,26 +1363,25 @@ megaraid_isr_memmapped(int irq, void *devp)
*
* Complete the commands and call the scsi mid-layer callback hooks.
*/
-static void
-mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
+static void mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus,
+ int status)
{
- mega_ext_passthru *epthru = NULL;
- struct scatterlist *sgl;
- struct scsi_cmnd *cmd = NULL;
- mega_passthru *pthru = NULL;
- mbox_t *mbox = NULL;
- u8 c;
- scb_t *scb;
- int islogical;
- int cmdid;
- int i;
+ mega_ext_passthru *epthru = NULL;
+ struct scatterlist *sgl;
+ struct scsi_cmnd *cmd = NULL;
+ mega_passthru *pthru = NULL;
+ mbox_t *mbox = NULL;
+ u8 c;
+ scb_t *scb;
+ int islogical;
+ int cmdid;
+ int i;
/*
* for all the commands completed, call the mid-layer callback routine
* and free the scb.
*/
- for( i = 0; i < nstatus; i++ ) {
-
+ for (i = 0; i < nstatus; i++) {
cmdid = completed[i];
/*
@@ -1449,10 +1405,11 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
/*
* Make sure f/w has completed a valid command
*/
- if( !(scb->state & SCB_ISSUED) || scb->cmd == NULL ) {
- dev_crit(&adapter->dev->dev, "invalid command "
- "Id %d, scb->state:%x, scsi cmd:%p\n",
- cmdid, scb->state, scb->cmd);
+ if (!(scb->state & SCB_ISSUED) || scb->cmd == NULL) {
+ dev_crit(&adapter->dev->dev,
+ "invalid command "
+ "Id %d, scb->state:%x, scsi cmd:%p\n",
+ cmdid, scb->state, scb->cmd);
continue;
}
@@ -1460,16 +1417,15 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
/*
* Was a abort issued for this command
*/
- if( scb->state & SCB_ABORT ) {
-
+ if (scb->state & SCB_ABORT) {
dev_warn(&adapter->dev->dev,
- "aborted cmd [%x] complete\n",
- scb->idx);
+ "aborted cmd [%x] complete\n",
+ scb->idx);
scb->cmd->result = (DID_ABORT << 16);
list_add_tail(SCSI_LIST(scb->cmd),
- &adapter->completed_list);
+ &adapter->completed_list);
mega_free_scb(adapter, scb);
@@ -1479,18 +1435,16 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
/*
* Was a reset issued for this command
*/
- if( scb->state & SCB_RESET ) {
-
+ if (scb->state & SCB_RESET) {
dev_warn(&adapter->dev->dev,
- "reset cmd [%x] complete\n",
- scb->idx);
+ "reset cmd [%x] complete\n", scb->idx);
scb->cmd->result = (DID_RESET << 16);
list_add_tail(SCSI_LIST(scb->cmd),
- &adapter->completed_list);
+ &adapter->completed_list);
- mega_free_scb (adapter, scb);
+ mega_free_scb(adapter, scb);
continue;
}
@@ -1502,35 +1456,35 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
#if MEGA_HAVE_STATS
{
+ int logdrv = mbox->m_out.logdrv;
- int logdrv = mbox->m_out.logdrv;
-
- islogical = adapter->logdrv_chan[cmd->channel];
- /*
+ islogical = adapter->logdrv_chan[cmd->channel];
+ /*
* Maintain an error counter for the logical drive.
* Some application like SNMP agent need such
* statistics
*/
- if( status && islogical && (cmd->cmnd[0] == READ_6 ||
- cmd->cmnd[0] == READ_10 ||
- cmd->cmnd[0] == READ_12)) {
- /*
+ if (status && islogical &&
+ (cmd->cmnd[0] == READ_6 ||
+ cmd->cmnd[0] == READ_10 ||
+ cmd->cmnd[0] == READ_12)) {
+ /*
* Logical drive number increases by 0x80 when
* a logical drive is deleted
*/
- adapter->rd_errors[logdrv%0x80]++;
- }
+ adapter->rd_errors[logdrv % 0x80]++;
+ }
- if( status && islogical && (cmd->cmnd[0] == WRITE_6 ||
- cmd->cmnd[0] == WRITE_10 ||
- cmd->cmnd[0] == WRITE_12)) {
- /*
+ if (status && islogical &&
+ (cmd->cmnd[0] == WRITE_6 ||
+ cmd->cmnd[0] == WRITE_10 ||
+ cmd->cmnd[0] == WRITE_12)) {
+ /*
* Logical drive number increases by 0x80 when
* a logical drive is deleted
*/
- adapter->wr_errors[logdrv%0x80]++;
- }
-
+ adapter->wr_errors[logdrv % 0x80]++;
+ }
}
#endif
}
@@ -1542,18 +1496,17 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
* PJ
*/
islogical = adapter->logdrv_chan[cmd->device->channel];
- if( cmd->cmnd[0] == INQUIRY && !islogical ) {
-
+ if (cmd->cmnd[0] == INQUIRY && !islogical) {
sgl = scsi_sglist(cmd);
- if( sg_page(sgl) ) {
- c = *(unsigned char *) sg_virt(&sgl[0]);
+ if (sg_page(sgl)) {
+ c = *(unsigned char *)sg_virt(&sgl[0]);
} else {
dev_warn(&adapter->dev->dev, "invalid sg\n");
c = 0;
}
- if(IS_RAID_CH(adapter, cmd->device->channel) &&
- ((c & 0x1F ) == TYPE_DISK)) {
+ if (IS_RAID_CH(adapter, cmd->device->channel) &&
+ ((c & 0x1F) == TYPE_DISK)) {
status = 0xF0;
}
}
@@ -1563,27 +1516,24 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
/* Convert MegaRAID status to Linux error code */
switch (status) {
- case 0x00: /* SUCCESS , i.e. SCSI_STATUS_GOOD */
+ case 0x00: /* SUCCESS , i.e. SCSI_STATUS_GOOD */
cmd->result |= (DID_OK << 16);
break;
- case 0x02: /* ERROR_ABORTED, i.e.
+ case 0x02: /* ERROR_ABORTED, i.e.
SCSI_STATUS_CHECK_CONDITION */
/* set sense_buffer and result fields */
- if( mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU ||
- mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64 ) {
-
+ if (mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU ||
+ mbox->m_out.cmd == MEGA_MBOXCMD_PASSTHRU64) {
memcpy(cmd->sense_buffer, pthru->reqsensearea,
- 14);
+ 14);
cmd->result = SAM_STAT_CHECK_CONDITION;
- }
- else {
+ } else {
if (mbox->m_out.cmd == MEGA_MBOXCMD_EXTPTHRU) {
-
memcpy(cmd->sense_buffer,
- epthru->reqsensearea, 14);
+ epthru->reqsensearea, 14);
cmd->result = SAM_STAT_CHECK_CONDITION;
} else
@@ -1592,7 +1542,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
}
break;
- case 0x08: /* ERR_DEST_DRIVE_FAILED, i.e.
+ case 0x08: /* ERR_DEST_DRIVE_FAILED, i.e.
SCSI_STATUS_BUSY */
cmd->result |= (DID_BUS_BUSY << 16) | status;
break;
@@ -1603,25 +1553,23 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
* If TEST_UNIT_READY fails, we know
* MEGA_RESERVATION_STATUS failed
*/
- if( cmd->cmnd[0] == TEST_UNIT_READY ) {
+ if (cmd->cmnd[0] == TEST_UNIT_READY) {
cmd->result |= (DID_ERROR << 16) |
- SAM_STAT_RESERVATION_CONFLICT;
- }
- else
- /*
+ SAM_STAT_RESERVATION_CONFLICT;
+ } else
+ /*
* Error code returned is 1 if Reserve or Release
* failed or the input parameter is invalid
*/
- if( status == 1 &&
- (cmd->cmnd[0] == RESERVE ||
- cmd->cmnd[0] == RELEASE) ) {
-
- cmd->result |= (DID_ERROR << 16) |
- SAM_STAT_RESERVATION_CONFLICT;
- }
- else
+ if (status == 1 && (cmd->cmnd[0] == RESERVE ||
+ cmd->cmnd[0] == RELEASE)) {
+ cmd->result |=
+ (DID_ERROR << 16) |
+ SAM_STAT_RESERVATION_CONFLICT;
+ } else
#endif
- cmd->result |= (DID_BAD_TARGET << 16)|status;
+ cmd->result |=
+ (DID_BAD_TARGET << 16) | status;
}
mega_free_scb(adapter, scb);
@@ -1631,21 +1579,18 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status)
}
}
-
/*
* mega_runpendq()
*
* Run through the list of completed requests and finish it
*/
-static void
-mega_rundoneq (adapter_t *adapter)
+static void mega_rundoneq(adapter_t *adapter)
{
struct scsi_cmnd *cmd;
struct list_head *pos;
- list_for_each(pos, &adapter->completed_list) {
-
- struct scsi_pointer* spos = (struct scsi_pointer *)pos;
+ list_for_each (pos, &adapter->completed_list) {
+ struct scsi_pointer *spos = (struct scsi_pointer *)pos;
cmd = list_entry(spos, struct scsi_cmnd, SCp);
scsi_done(cmd);
@@ -1654,16 +1599,13 @@ mega_rundoneq (adapter_t *adapter)
INIT_LIST_HEAD(&adapter->completed_list);
}
-
/*
* Free a SCB structure
* Note: We assume the scsi commands associated with this scb is not free yet.
*/
-static void
-mega_free_scb(adapter_t *adapter, scb_t *scb)
+static void mega_free_scb(adapter_t *adapter, scb_t *scb)
{
- switch( scb->dma_type ) {
-
+ switch (scb->dma_type) {
case MEGA_DMA_TYPE_NONE:
break;
@@ -1686,9 +1628,7 @@ mega_free_scb(adapter_t *adapter, scb_t *scb)
list_add(&scb->list, &adapter->free_list);
}
-
-static int
-__mega_busywait_mbox (adapter_t *adapter)
+static int __mega_busywait_mbox(adapter_t *adapter)
{
volatile mbox_t *mbox = adapter->mbox;
long counter;
@@ -1699,20 +1639,19 @@ __mega_busywait_mbox (adapter_t *adapter)
udelay(100);
cond_resched();
}
- return -1; /* give up after 1 second */
+ return -1; /* give up after 1 second */
}
/*
* Copies data to SGLIST
* Note: For 64 bit cards, we need a minimum of one SG element for read/write
*/
-static int
-mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
+static int mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
{
struct scatterlist *sg;
- struct scsi_cmnd *cmd;
- int sgcnt;
- int idx;
+ struct scsi_cmnd *cmd;
+ int sgcnt;
+ int idx;
cmd = scb->cmd;
@@ -1737,7 +1676,7 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
return 0;
}
- scsi_for_each_sg(cmd, sg, sgcnt, idx) {
+ scsi_for_each_sg (cmd, sg, sgcnt, idx) {
if (adapter->has_64bit_addr) {
scb->sgl64[idx].address = sg_dma_address(sg);
*len += scb->sgl64[idx].length = sg_dma_len(sg);
@@ -1754,16 +1693,14 @@ mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buf, u32 *len)
return sgcnt;
}
-
/*
* mega_8_to_40ld()
*
* takes all info in AdapterInquiry structure and puts it into ProductInfo and
* Enquiry3 structures for later use
*/
-static void
-mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
- mega_product_info *product_info)
+static void mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
+ mega_product_info *product_info)
{
int i;
@@ -1795,17 +1732,15 @@ mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
enquiry3->pdrv_state[i] = inquiry->pdrv_info.pdrv_state[i];
}
-static inline void
-mega_free_sgl(adapter_t *adapter)
+static inline void mega_free_sgl(adapter_t *adapter)
{
- scb_t *scb;
- int i;
-
- for(i = 0; i < adapter->max_cmds; i++) {
+ scb_t *scb;
+ int i;
+ for (i = 0; i < adapter->max_cmds; i++) {
scb = &adapter->scb_list[i];
- if( scb->sgl64 ) {
+ if (scb->sgl64) {
dma_free_coherent(&adapter->dev->dev,
sizeof(mega_sgl64) * adapter->sglen,
scb->sgl64, scb->sgl_dma_addr);
@@ -1813,7 +1748,7 @@ mega_free_sgl(adapter_t *adapter)
scb->sgl64 = NULL;
}
- if( scb->pthru ) {
+ if (scb->pthru) {
dma_free_coherent(&adapter->dev->dev,
sizeof(mega_passthru), scb->pthru,
scb->pthru_dma_addr);
@@ -1821,34 +1756,31 @@ mega_free_sgl(adapter_t *adapter)
scb->pthru = NULL;
}
- if( scb->epthru ) {
+ if (scb->epthru) {
dma_free_coherent(&adapter->dev->dev,
sizeof(mega_ext_passthru),
scb->epthru, scb->epthru_dma_addr);
scb->epthru = NULL;
}
-
}
}
-
/*
* Get information about the card/driver
*/
-const char *
-megaraid_info(struct Scsi_Host *host)
+const char *megaraid_info(struct Scsi_Host *host)
{
static char buffer[512];
adapter_t *adapter;
adapter = (adapter_t *)host->hostdata;
- sprintf (buffer,
- "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns",
- adapter->fw_version, adapter->product_info.max_commands,
- adapter->host->max_id, adapter->host->max_channel,
- (u32)adapter->host->max_lun);
+ sprintf(buffer,
+ "LSI Logic MegaRAID %s %d commands %d targs %d chans %d luns",
+ adapter->fw_version, adapter->product_info.max_commands,
+ adapter->host->max_id, adapter->host->max_channel,
+ (u32)adapter->host->max_lun);
return buffer;
}
@@ -1856,15 +1788,14 @@ megaraid_info(struct Scsi_Host *host)
* Abort a previous SCSI request. Only commands on the pending list can be
* aborted. All the commands issued to the F/W must complete.
*/
-static int
-megaraid_abort(struct scsi_cmnd *cmd)
+static int megaraid_abort(struct scsi_cmnd *cmd)
{
- adapter_t *adapter;
- int rval;
+ adapter_t *adapter;
+ int rval;
adapter = (adapter_t *)cmd->device->host->hostdata;
- rval = megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
+ rval = megaraid_abort_and_reset(adapter, cmd, SCB_ABORT);
/*
* This is required here to complete any completed requests
@@ -1875,13 +1806,11 @@ megaraid_abort(struct scsi_cmnd *cmd)
return rval;
}
-
-static int
-megaraid_reset(struct scsi_cmnd *cmd)
+static int megaraid_reset(struct scsi_cmnd *cmd)
{
- adapter_t *adapter;
- megacmd_t mc;
- int rval;
+ adapter_t *adapter;
+ megacmd_t mc;
+ int rval;
adapter = (adapter_t *)cmd->device->host->hostdata;
@@ -1889,17 +1818,16 @@ megaraid_reset(struct scsi_cmnd *cmd)
mc.cmd = MEGA_CLUSTER_CMD;
mc.opcode = MEGA_RESET_RESERVATIONS;
- if( mega_internal_command(adapter, &mc, NULL) != 0 ) {
+ if (mega_internal_command(adapter, &mc, NULL) != 0) {
dev_warn(&adapter->dev->dev, "reservation reset failed\n");
- }
- else {
+ } else {
dev_info(&adapter->dev->dev, "reservation reset\n");
}
#endif
spin_lock_irq(&adapter->lock);
- rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
+ rval = megaraid_abort_and_reset(adapter, cmd, SCB_RESET);
/*
* This is required here to complete any completed requests
@@ -1920,22 +1848,20 @@ megaraid_reset(struct scsi_cmnd *cmd)
* Try to locate the scsi command in the pending queue. If found and is not
* issued to the controller, abort/reset it. Otherwise return failure
*/
-static int
-megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
+static int megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd,
+ int aor)
{
- struct list_head *pos, *next;
- scb_t *scb;
+ struct list_head *pos, *next;
+ scb_t *scb;
dev_warn(&adapter->dev->dev, "%s cmd=%x <c=%d t=%d l=%d>\n",
- (aor == SCB_ABORT)? "ABORTING":"RESET",
- cmd->cmnd[0], cmd->device->channel,
- cmd->device->id, (u32)cmd->device->lun);
+ (aor == SCB_ABORT) ? "ABORTING" : "RESET", cmd->cmnd[0],
+ cmd->device->channel, cmd->device->id, (u32)cmd->device->lun);
- if(list_empty(&adapter->pending_list))
+ if (list_empty(&adapter->pending_list))
return FAILED;
- list_for_each_safe(pos, next, &adapter->pending_list) {
-
+ list_for_each_safe (pos, next, &adapter->pending_list) {
scb = list_entry(pos, scb_t, list);
if (scb->cmd == cmd) { /* Found command */
@@ -1948,37 +1874,35 @@ megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
* completes this command, we will return appropriate
* status from ISR.
*/
- if( scb->state & SCB_ISSUED ) {
-
+ if (scb->state & SCB_ISSUED) {
dev_warn(&adapter->dev->dev,
- "%s[%x], fw owner\n",
- (aor==SCB_ABORT) ? "ABORTING":"RESET",
- scb->idx);
+ "%s[%x], fw owner\n",
+ (aor == SCB_ABORT) ? "ABORTING" :
+ "RESET",
+ scb->idx);
return FAILED;
- }
- else {
-
+ } else {
/*
* Not yet issued! Remove from the pending
* list
*/
dev_warn(&adapter->dev->dev,
- "%s-[%x], driver owner\n",
- (aor==SCB_ABORT) ? "ABORTING":"RESET",
- scb->idx);
+ "%s-[%x], driver owner\n",
+ (aor == SCB_ABORT) ? "ABORTING" :
+ "RESET",
+ scb->idx);
mega_free_scb(adapter, scb);
- if( aor == SCB_ABORT ) {
+ if (aor == SCB_ABORT) {
cmd->result = (DID_ABORT << 16);
- }
- else {
+ } else {
cmd->result = (DID_RESET << 16);
}
list_add_tail(SCSI_LIST(cmd),
- &adapter->completed_list);
+ &adapter->completed_list);
return SUCCESS;
}
@@ -1988,12 +1912,12 @@ megaraid_abort_and_reset(adapter_t *adapter, struct scsi_cmnd *cmd, int aor)
return FAILED;
}
-static inline int
-make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
+static inline int make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
{
*pdev = pci_alloc_dev(NULL);
- if( *pdev == NULL ) return -1;
+ if (*pdev == NULL)
+ return -1;
memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
@@ -2005,8 +1929,7 @@ make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
return 0;
}
-static inline void
-free_local_pdev(struct pci_dev *pdev)
+static inline void free_local_pdev(struct pci_dev *pdev)
{
kfree(pdev);
}
@@ -2018,22 +1941,20 @@ free_local_pdev(struct pci_dev *pdev)
*
* allocates memory for inquiry structure
*/
-static inline void *
-mega_allocate_inquiry(dma_addr_t *dma_handle, struct pci_dev *pdev)
+static inline void *mega_allocate_inquiry(dma_addr_t *dma_handle,
+ struct pci_dev *pdev)
{
- return dma_alloc_coherent(&pdev->dev, sizeof(mega_inquiry3),
- dma_handle, GFP_KERNEL);
+ return dma_alloc_coherent(&pdev->dev, sizeof(mega_inquiry3), dma_handle,
+ GFP_KERNEL);
}
-
-static inline void
-mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
+static inline void mega_free_inquiry(void *inquiry, dma_addr_t dma_handle,
+ struct pci_dev *pdev)
{
dma_free_coherent(&pdev->dev, sizeof(mega_inquiry3), inquiry,
dma_handle);
}
-
#ifdef CONFIG_PROC_FS
/* Following code handles /proc fs */
@@ -2044,42 +1965,40 @@ mega_free_inquiry(void *inquiry, dma_addr_t dma_handle, struct pci_dev *pdev)
*
* Display configuration information about the controller.
*/
-static int
-proc_show_config(struct seq_file *m, void *v)
+static int proc_show_config(struct seq_file *m, void *v)
{
-
adapter_t *adapter = m->private;
seq_puts(m, MEGARAID_VERSION);
- if(adapter->product_info.product_name[0])
+ if (adapter->product_info.product_name[0])
seq_printf(m, "%s\n", adapter->product_info.product_name);
seq_puts(m, "Controller Type: ");
- if( adapter->flag & BOARD_MEMMAP )
+ if (adapter->flag & BOARD_MEMMAP)
seq_puts(m, "438/466/467/471/493/518/520/531/532\n");
else
seq_puts(m, "418/428/434\n");
- if(adapter->flag & BOARD_40LD)
+ if (adapter->flag & BOARD_40LD)
seq_puts(m, "Controller Supports 40 Logical Drives\n");
- if(adapter->flag & BOARD_64BIT)
+ if (adapter->flag & BOARD_64BIT)
seq_puts(m, "Controller capable of 64-bit memory addressing\n");
- if( adapter->has_64bit_addr )
+ if (adapter->has_64bit_addr)
seq_puts(m, "Controller using 64-bit memory addressing\n");
else
- seq_puts(m, "Controller is not using 64-bit memory addressing\n");
+ seq_puts(m,
+ "Controller is not using 64-bit memory addressing\n");
- seq_printf(m, "Base = %08lx, Irq = %d, ",
- adapter->base, adapter->host->irq);
+ seq_printf(m, "Base = %08lx, Irq = %d, ", adapter->base,
+ adapter->host->irq);
- seq_printf(m, "Logical Drives = %d, Channels = %d\n",
- adapter->numldrv, adapter->product_info.nchannels);
+ seq_printf(m, "Logical Drives = %d, Channels = %d\n", adapter->numldrv,
+ adapter->product_info.nchannels);
- seq_printf(m, "Version =%s:%s, DRAM = %dMb\n",
- adapter->fw_version, adapter->bios_version,
- adapter->product_info.dram_size);
+ seq_printf(m, "Version =%s:%s, DRAM = %dMb\n", adapter->fw_version,
+ adapter->bios_version, adapter->product_info.dram_size);
seq_printf(m, "Controller Queue Depth = %d, Driver Queue Depth = %d\n",
adapter->product_info.max_commands, adapter->max_cmds);
@@ -2108,18 +2027,17 @@ proc_show_config(struct seq_file *m, void *v)
*
* Display statistical information about the I/O activity.
*/
-static int
-proc_show_stat(struct seq_file *m, void *v)
+static int proc_show_stat(struct seq_file *m, void *v)
{
adapter_t *adapter = m->private;
#if MEGA_HAVE_STATS
- int i;
+ int i;
#endif
seq_puts(m, "Statistical Information for this controller\n");
seq_printf(m, "pend_cmds = %d\n", atomic_read(&adapter->pend_cmds));
#if MEGA_HAVE_STATS
- for(i = 0; i < adapter->numldrv; i++) {
+ for (i = 0; i < adapter->numldrv; i++) {
seq_printf(m, "Logical Drive %d:\n", i);
seq_printf(m, "\tReads Issued = %lu, Writes Issued = %lu\n",
adapter->nreads[i], adapter->nwrites[i]);
@@ -2134,7 +2052,6 @@ proc_show_stat(struct seq_file *m, void *v)
return 0;
}
-
/**
* proc_show_mbox()
* @m: Synthetic file construction data
@@ -2143,11 +2060,10 @@ proc_show_stat(struct seq_file *m, void *v)
* Display mailbox information for the last command issued. This information
* is good for debugging.
*/
-static int
-proc_show_mbox(struct seq_file *m, void *v)
+static int proc_show_mbox(struct seq_file *m, void *v)
{
- adapter_t *adapter = m->private;
- volatile mbox_t *mbox = adapter->mbox;
+ adapter_t *adapter = m->private;
+ volatile mbox_t *mbox = adapter->mbox;
seq_puts(m, "Contents of Mail Box Structure\n");
seq_printf(m, " Fw Command = 0x%02x\n", mbox->m_out.cmd);
@@ -2162,7 +2078,6 @@ proc_show_mbox(struct seq_file *m, void *v)
return 0;
}
-
/**
* proc_show_rebuild_rate()
* @m: Synthetic file construction data
@@ -2170,33 +2085,32 @@ proc_show_mbox(struct seq_file *m, void *v)
*
* Display current rebuild rate
*/
-static int
-proc_show_rebuild_rate(struct seq_file *m, void *v)
+static int proc_show_rebuild_rate(struct seq_file *m, void *v)
{
- adapter_t *adapter = m->private;
- dma_addr_t dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
+ adapter_t *adapter = m->private;
+ dma_addr_t dma_handle;
+ caddr_t inquiry;
+ struct pci_dev *pdev;
- if( make_local_pdev(adapter, &pdev) != 0 )
+ if (make_local_pdev(adapter, &pdev) != 0)
return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
+ if ((inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL)
goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
+ if (mega_adapinq(adapter, dma_handle) != 0) {
seq_puts(m, "Adapter inquiry failed.\n");
dev_warn(&adapter->dev->dev, "inquiry failed\n");
goto free_inquiry;
}
- if( adapter->flag & BOARD_40LD )
+ if (adapter->flag & BOARD_40LD)
seq_printf(m, "Rebuild Rate: [%d%%]\n",
((mega_inquiry3 *)inquiry)->rebuild_rate);
else
seq_printf(m, "Rebuild Rate: [%d%%]\n",
- ((mraid_ext_inquiry *)
- inquiry)->raid_inq.adapter_info.rebuild_rate);
+ ((mraid_ext_inquiry *)inquiry)
+ ->raid_inq.adapter_info.rebuild_rate);
free_inquiry:
mega_free_inquiry(inquiry, dma_handle, pdev);
@@ -2205,7 +2119,6 @@ proc_show_rebuild_rate(struct seq_file *m, void *v)
return 0;
}
-
/**
* proc_show_battery()
* @m: Synthetic file construction data
@@ -2213,33 +2126,31 @@ proc_show_rebuild_rate(struct seq_file *m, void *v)
*
* Display information about the battery module on the controller.
*/
-static int
-proc_show_battery(struct seq_file *m, void *v)
+static int proc_show_battery(struct seq_file *m, void *v)
{
- adapter_t *adapter = m->private;
- dma_addr_t dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 battery_status;
+ adapter_t *adapter = m->private;
+ dma_addr_t dma_handle;
+ caddr_t inquiry;
+ struct pci_dev *pdev;
+ u8 battery_status;
- if( make_local_pdev(adapter, &pdev) != 0 )
+ if (make_local_pdev(adapter, &pdev) != 0)
return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
+ if ((inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL)
goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
+ if (mega_adapinq(adapter, dma_handle) != 0) {
seq_puts(m, "Adapter inquiry failed.\n");
dev_warn(&adapter->dev->dev, "inquiry failed\n");
goto free_inquiry;
}
- if( adapter->flag & BOARD_40LD ) {
+ if (adapter->flag & BOARD_40LD) {
battery_status = ((mega_inquiry3 *)inquiry)->battery_status;
- }
- else {
- battery_status = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.adapter_info.battery_status;
+ } else {
+ battery_status = ((mraid_ext_inquiry *)inquiry)
+ ->raid_inq.adapter_info.battery_status;
}
/*
@@ -2247,28 +2158,28 @@ proc_show_battery(struct seq_file *m, void *v)
*/
seq_printf(m, "Battery Status:[%d]", battery_status);
- if(battery_status == MEGA_BATT_CHARGE_DONE)
+ if (battery_status == MEGA_BATT_CHARGE_DONE)
seq_puts(m, " Charge Done");
- if(battery_status & MEGA_BATT_MODULE_MISSING)
+ if (battery_status & MEGA_BATT_MODULE_MISSING)
seq_puts(m, " Module Missing");
-
- if(battery_status & MEGA_BATT_LOW_VOLTAGE)
+
+ if (battery_status & MEGA_BATT_LOW_VOLTAGE)
seq_puts(m, " Low Voltage");
-
- if(battery_status & MEGA_BATT_TEMP_HIGH)
+
+ if (battery_status & MEGA_BATT_TEMP_HIGH)
seq_puts(m, " Temperature High");
-
- if(battery_status & MEGA_BATT_PACK_MISSING)
+
+ if (battery_status & MEGA_BATT_PACK_MISSING)
seq_puts(m, " Pack Missing");
-
- if(battery_status & MEGA_BATT_CHARGE_INPROG)
+
+ if (battery_status & MEGA_BATT_CHARGE_INPROG)
seq_puts(m, " Charge In-progress");
-
- if(battery_status & MEGA_BATT_CHARGE_FAIL)
+
+ if (battery_status & MEGA_BATT_CHARGE_FAIL)
seq_puts(m, " Charge Fail");
-
- if(battery_status & MEGA_BATT_CYCLES_EXCEEDED)
+
+ if (battery_status & MEGA_BATT_CYCLES_EXCEEDED)
seq_puts(m, " Cycles Exceeded");
seq_putc(m, '\n');
@@ -2280,14 +2191,12 @@ proc_show_battery(struct seq_file *m, void *v)
return 0;
}
-
/*
* Display scsi inquiry
*/
-static void
-mega_print_inquiry(struct seq_file *m, char *scsi_inq)
+static void mega_print_inquiry(struct seq_file *m, char *scsi_inq)
{
- int i;
+ int i;
seq_puts(m, " Vendor: ");
seq_write(m, scsi_inq + 8, 8);
@@ -2303,7 +2212,7 @@ mega_print_inquiry(struct seq_file *m, char *scsi_inq)
seq_printf(m, " ANSI SCSI revision: %02x",
scsi_inq[2] & 0x07);
- if( (scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1 )
+ if ((scsi_inq[2] & 0x07) == 1 && (scsi_inq[3] & 0x0f) == 1)
seq_puts(m, " CCS\n");
else
seq_putc(m, '\n');
@@ -2317,60 +2226,56 @@ mega_print_inquiry(struct seq_file *m, char *scsi_inq)
*
* Display information about the physical drives.
*/
-static int
-proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
+static int proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
{
- dma_addr_t dma_handle;
- char *scsi_inq;
- dma_addr_t scsi_inq_dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 *pdrv_state;
- u8 state;
- int tgt;
- int max_channels;
- int i;
-
- if( make_local_pdev(adapter, &pdev) != 0 )
+ dma_addr_t dma_handle;
+ char *scsi_inq;
+ dma_addr_t scsi_inq_dma_handle;
+ caddr_t inquiry;
+ struct pci_dev *pdev;
+ u8 *pdrv_state;
+ u8 state;
+ int tgt;
+ int max_channels;
+ int i;
+
+ if (make_local_pdev(adapter, &pdev) != 0)
return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
+ if ((inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL)
goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
+ if (mega_adapinq(adapter, dma_handle) != 0) {
seq_puts(m, "Adapter inquiry failed.\n");
dev_warn(&adapter->dev->dev, "inquiry failed\n");
goto free_inquiry;
}
-
scsi_inq = dma_alloc_coherent(&pdev->dev, 256, &scsi_inq_dma_handle,
GFP_KERNEL);
- if( scsi_inq == NULL ) {
+ if (scsi_inq == NULL) {
seq_puts(m, "memory not available for scsi inq.\n");
goto free_inquiry;
}
- if( adapter->flag & BOARD_40LD ) {
+ if (adapter->flag & BOARD_40LD) {
pdrv_state = ((mega_inquiry3 *)inquiry)->pdrv_state;
- }
- else {
- pdrv_state = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.pdrv_info.pdrv_state;
+ } else {
+ pdrv_state = ((mraid_ext_inquiry *)inquiry)
+ ->raid_inq.pdrv_info.pdrv_state;
}
max_channels = adapter->product_info.nchannels;
- if( channel >= max_channels ) {
+ if (channel >= max_channels) {
goto free_pci;
}
- for( tgt = 0; tgt <= MAX_TARGET; tgt++ ) {
-
- i = channel*16 + tgt;
+ for (tgt = 0; tgt <= MAX_TARGET; tgt++) {
+ i = channel * 16 + tgt;
state = *(pdrv_state + i);
- switch( state & 0x0F ) {
+ switch (state & 0x0F) {
case PDRV_ONLINE:
seq_printf(m, "Channel:%2d Id:%2d State: Online",
channel, tgt);
@@ -2403,9 +2308,9 @@ proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
* devices are available through /proc/scsi/scsi
*/
memset(scsi_inq, 0, 256);
- if( mega_internal_dev_inquiry(adapter, channel, tgt,
- scsi_inq_dma_handle) ||
- (scsi_inq[0] & 0x1F) != TYPE_DISK ) {
+ if (mega_internal_dev_inquiry(adapter, channel, tgt,
+ scsi_inq_dma_handle) ||
+ (scsi_inq[0] & 0x1F) != TYPE_DISK) {
continue;
}
@@ -2433,13 +2338,11 @@ proc_show_pdrv(struct seq_file *m, adapter_t *adapter, int channel)
*
* Display information about the physical drives on physical channel 0.
*/
-static int
-proc_show_pdrv_ch0(struct seq_file *m, void *v)
+static int proc_show_pdrv_ch0(struct seq_file *m, void *v)
{
return proc_show_pdrv(m, m->private, 0);
}
-
/**
* proc_show_pdrv_ch1()
* @m: Synthetic file construction data
@@ -2447,13 +2350,11 @@ proc_show_pdrv_ch0(struct seq_file *m, void *v)
*
* Display information about the physical drives on physical channel 1.
*/
-static int
-proc_show_pdrv_ch1(struct seq_file *m, void *v)
+static int proc_show_pdrv_ch1(struct seq_file *m, void *v)
{
return proc_show_pdrv(m, m->private, 1);
}
-
/**
* proc_show_pdrv_ch2()
* @m: Synthetic file construction data
@@ -2461,13 +2362,11 @@ proc_show_pdrv_ch1(struct seq_file *m, void *v)
*
* Display information about the physical drives on physical channel 2.
*/
-static int
-proc_show_pdrv_ch2(struct seq_file *m, void *v)
+static int proc_show_pdrv_ch2(struct seq_file *m, void *v)
{
return proc_show_pdrv(m, m->private, 2);
}
-
/**
* proc_show_pdrv_ch3()
* @m: Synthetic file construction data
@@ -2475,13 +2374,11 @@ proc_show_pdrv_ch2(struct seq_file *m, void *v)
*
* Display information about the physical drives on physical channel 3.
*/
-static int
-proc_show_pdrv_ch3(struct seq_file *m, void *v)
+static int proc_show_pdrv_ch3(struct seq_file *m, void *v)
{
return proc_show_pdrv(m, m->private, 3);
}
-
/**
* proc_show_rdrv()
* @m: Synthetic file construction data
@@ -2492,28 +2389,28 @@ proc_show_pdrv_ch3(struct seq_file *m, void *v)
* We do not print the inquiry information since its already available through
* /proc/scsi/scsi interface
*/
-static int
-proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
+static int proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start,
+ int end)
{
- dma_addr_t dma_handle;
- logdrv_param *lparam;
- megacmd_t mc;
- char *disk_array;
- dma_addr_t disk_array_dma_handle;
- caddr_t inquiry;
- struct pci_dev *pdev;
- u8 *rdrv_state;
- int num_ldrv;
- u32 array_sz;
- int i;
-
- if( make_local_pdev(adapter, &pdev) != 0 )
+ dma_addr_t dma_handle;
+ logdrv_param *lparam;
+ megacmd_t mc;
+ char *disk_array;
+ dma_addr_t disk_array_dma_handle;
+ caddr_t inquiry;
+ struct pci_dev *pdev;
+ u8 *rdrv_state;
+ int num_ldrv;
+ u32 array_sz;
+ int i;
+
+ if (make_local_pdev(adapter, &pdev) != 0)
return 0;
- if( (inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL )
+ if ((inquiry = mega_allocate_inquiry(&dma_handle, pdev)) == NULL)
goto free_pdev;
- if( mega_adapinq(adapter, dma_handle) != 0 ) {
+ if (mega_adapinq(adapter, dma_handle) != 0) {
seq_puts(m, "Adapter inquiry failed.\n");
dev_warn(&adapter->dev->dev, "inquiry failed\n");
goto free_inquiry;
@@ -2521,64 +2418,60 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
memset(&mc, 0, sizeof(megacmd_t));
- if( adapter->flag & BOARD_40LD ) {
+ if (adapter->flag & BOARD_40LD) {
array_sz = sizeof(disk_array_40ld);
rdrv_state = ((mega_inquiry3 *)inquiry)->ldrv_state;
num_ldrv = ((mega_inquiry3 *)inquiry)->num_ldrv;
- }
- else {
+ } else {
array_sz = sizeof(disk_array_8ld);
- rdrv_state = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.logdrv_info.ldrv_state;
+ rdrv_state = ((mraid_ext_inquiry *)inquiry)
+ ->raid_inq.logdrv_info.ldrv_state;
- num_ldrv = ((mraid_ext_inquiry *)inquiry)->
- raid_inq.logdrv_info.num_ldrv;
+ num_ldrv = ((mraid_ext_inquiry *)inquiry)
+ ->raid_inq.logdrv_info.num_ldrv;
}
disk_array = dma_alloc_coherent(&pdev->dev, array_sz,
&disk_array_dma_handle, GFP_KERNEL);
- if( disk_array == NULL ) {
+ if (disk_array == NULL) {
seq_puts(m, "memory not available.\n");
goto free_inquiry;
}
mc.xferaddr = (u32)disk_array_dma_handle;
- if( adapter->flag & BOARD_40LD ) {
+ if (adapter->flag & BOARD_40LD) {
mc.cmd = FC_NEW_CONFIG;
mc.opcode = OP_DCMD_READ_CONFIG;
- if( mega_internal_command(adapter, &mc, NULL) ) {
+ if (mega_internal_command(adapter, &mc, NULL)) {
seq_puts(m, "40LD read config failed.\n");
goto free_pci;
}
- }
- else {
+ } else {
mc.cmd = NEW_READ_CONFIG_8LD;
- if( mega_internal_command(adapter, &mc, NULL) ) {
+ if (mega_internal_command(adapter, &mc, NULL)) {
mc.cmd = READ_CONFIG_8LD;
- if( mega_internal_command(adapter, &mc, NULL) ) {
+ if (mega_internal_command(adapter, &mc, NULL)) {
seq_puts(m, "8LD read config failed.\n");
goto free_pci;
}
}
}
- for( i = start; i < ( (end+1 < num_ldrv) ? end+1 : num_ldrv ); i++ ) {
-
- if( adapter->flag & BOARD_40LD ) {
+ for (i = start; i < ((end + 1 < num_ldrv) ? end + 1 : num_ldrv); i++) {
+ if (adapter->flag & BOARD_40LD) {
lparam =
- &((disk_array_40ld *)disk_array)->ldrv[i].lparam;
- }
- else {
+ &((disk_array_40ld *)disk_array)->ldrv[i].lparam;
+ } else {
lparam =
- &((disk_array_8ld *)disk_array)->ldrv[i].lparam;
+ &((disk_array_8ld *)disk_array)->ldrv[i].lparam;
}
/*
@@ -2587,7 +2480,7 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
*/
seq_printf(m, "Logical drive:%2d:, ", i);
- switch( rdrv_state[i] & 0x0F ) {
+ switch (rdrv_state[i] & 0x0F) {
case RDRV_OFFLINE:
seq_puts(m, "state: offline");
break;
@@ -2609,21 +2502,21 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
* Check if check consistency or initialization is going on
* for this logical drive.
*/
- if( (rdrv_state[i] & 0xF0) == 0x20 )
+ if ((rdrv_state[i] & 0xF0) == 0x20)
seq_puts(m, ", check-consistency in progress");
- else if( (rdrv_state[i] & 0xF0) == 0x10 )
+ else if ((rdrv_state[i] & 0xF0) == 0x10)
seq_puts(m, ", initialization in progress");
-
+
seq_putc(m, '\n');
seq_printf(m, "Span depth:%3d, ", lparam->span_depth);
seq_printf(m, "RAID level:%3d, ", lparam->level);
seq_printf(m, "Stripe size:%3d, ",
- lparam->stripe_sz ? lparam->stripe_sz/2: 128);
+ lparam->stripe_sz ? lparam->stripe_sz / 2 : 128);
seq_printf(m, "Row size:%3d\n", lparam->row_size);
seq_puts(m, "Read Policy: ");
- switch(lparam->read_ahead) {
+ switch (lparam->read_ahead) {
case NO_READ_AHEAD:
seq_puts(m, "No read ahead, ");
break;
@@ -2633,11 +2526,10 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
case ADAP_READ_AHEAD:
seq_puts(m, "Adaptive, ");
break;
-
}
seq_puts(m, "Write Policy: ");
- switch(lparam->write_mode) {
+ switch (lparam->write_mode) {
case WRMODE_WRITE_THRU:
seq_puts(m, "Write thru, ");
break;
@@ -2647,7 +2539,7 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
}
seq_puts(m, "Cache Policy: ");
- switch(lparam->direct_io) {
+ switch (lparam->direct_io) {
case CACHED_IO:
seq_puts(m, "Cached IO\n\n");
break;
@@ -2674,13 +2566,11 @@ proc_show_rdrv(struct seq_file *m, adapter_t *adapter, int start, int end )
*
* Display real time information about the logical drives 0 through 9.
*/
-static int
-proc_show_rdrv_10(struct seq_file *m, void *v)
+static int proc_show_rdrv_10(struct seq_file *m, void *v)
{
return proc_show_rdrv(m, m->private, 0, 9);
}
-
/**
* proc_show_rdrv_20()
* @m: Synthetic file construction data
@@ -2688,13 +2578,11 @@ proc_show_rdrv_10(struct seq_file *m, void *v)
*
* Display real time information about the logical drives 0 through 9.
*/
-static int
-proc_show_rdrv_20(struct seq_file *m, void *v)
+static int proc_show_rdrv_20(struct seq_file *m, void *v)
{
return proc_show_rdrv(m, m->private, 10, 19);
}
-
/**
* proc_show_rdrv_30()
* @m: Synthetic file construction data
@@ -2702,13 +2590,11 @@ proc_show_rdrv_20(struct seq_file *m, void *v)
*
* Display real time information about the logical drives 0 through 9.
*/
-static int
-proc_show_rdrv_30(struct seq_file *m, void *v)
+static int proc_show_rdrv_30(struct seq_file *m, void *v)
{
return proc_show_rdrv(m, m->private, 20, 29);
}
-
/**
* proc_show_rdrv_40()
* @m: Synthetic file construction data
@@ -2716,8 +2602,7 @@ proc_show_rdrv_30(struct seq_file *m, void *v)
*
* Display real time information about the logical drives 0 through 9.
*/
-static int
-proc_show_rdrv_40(struct seq_file *m, void *v)
+static int proc_show_rdrv_40(struct seq_file *m, void *v)
{
return proc_show_rdrv(m, m->private, 30, 39);
}
@@ -2729,8 +2614,7 @@ proc_show_rdrv_40(struct seq_file *m, void *v)
*
* Creates /proc entries for our controllers.
*/
-static void
-mega_create_proc_entry(int index, struct proc_dir_entry *parent)
+static void mega_create_proc_entry(int index, struct proc_dir_entry *parent)
{
adapter_t *adapter = hba_soft_state[index];
struct proc_dir_entry *dir;
@@ -2743,82 +2627,80 @@ mega_create_proc_entry(int index, struct proc_dir_entry *parent)
return;
}
- proc_create_single_data("config", S_IRUSR, dir,
- proc_show_config, adapter);
- proc_create_single_data("stat", S_IRUSR, dir,
- proc_show_stat, adapter);
- proc_create_single_data("mailbox", S_IRUSR, dir,
- proc_show_mbox, adapter);
+ proc_create_single_data("config", S_IRUSR, dir, proc_show_config,
+ adapter);
+ proc_create_single_data("stat", S_IRUSR, dir, proc_show_stat, adapter);
+ proc_create_single_data("mailbox", S_IRUSR, dir, proc_show_mbox,
+ adapter);
#if MEGA_HAVE_ENH_PROC
proc_create_single_data("rebuild-rate", S_IRUSR, dir,
- proc_show_rebuild_rate, adapter);
+ proc_show_rebuild_rate, adapter);
proc_create_single_data("battery-status", S_IRUSR, dir,
- proc_show_battery, adapter);
+ proc_show_battery, adapter);
proc_create_single_data("diskdrives-ch0", S_IRUSR, dir,
- proc_show_pdrv_ch0, adapter);
+ proc_show_pdrv_ch0, adapter);
proc_create_single_data("diskdrives-ch1", S_IRUSR, dir,
- proc_show_pdrv_ch1, adapter);
+ proc_show_pdrv_ch1, adapter);
proc_create_single_data("diskdrives-ch2", S_IRUSR, dir,
- proc_show_pdrv_ch2, adapter);
+ proc_show_pdrv_ch2, adapter);
proc_create_single_data("diskdrives-ch3", S_IRUSR, dir,
- proc_show_pdrv_ch3, adapter);
+ proc_show_pdrv_ch3, adapter);
proc_create_single_data("raiddrives-0-9", S_IRUSR, dir,
- proc_show_rdrv_10, adapter);
+ proc_show_rdrv_10, adapter);
proc_create_single_data("raiddrives-10-19", S_IRUSR, dir,
- proc_show_rdrv_20, adapter);
+ proc_show_rdrv_20, adapter);
proc_create_single_data("raiddrives-20-29", S_IRUSR, dir,
- proc_show_rdrv_30, adapter);
+ proc_show_rdrv_30, adapter);
proc_create_single_data("raiddrives-30-39", S_IRUSR, dir,
- proc_show_rdrv_40, adapter);
+ proc_show_rdrv_40, adapter);
#endif
}
#else
-static inline void mega_create_proc_entry(int index, struct proc_dir_entry *parent)
+static inline void mega_create_proc_entry(int index,
+ struct proc_dir_entry *parent)
{
}
#endif
-
/*
* megaraid_biosparam()
*
* Return the disk geometry for a particular disk
*/
-static int
-megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int geom[])
+static int megaraid_biosparam(struct scsi_device *sdev,
+ struct block_device *bdev, sector_t capacity,
+ int geom[])
{
- adapter_t *adapter;
- int heads;
- int sectors;
- int cylinders;
+ adapter_t *adapter;
+ int heads;
+ int sectors;
+ int cylinders;
/* Get pointer to host config structure */
adapter = (adapter_t *)sdev->host->hostdata;
if (IS_RAID_CH(adapter, sdev->channel)) {
- /* Default heads (64) & sectors (32) */
- heads = 64;
- sectors = 32;
- cylinders = (ulong)capacity / (heads * sectors);
+ /* Default heads (64) & sectors (32) */
+ heads = 64;
+ sectors = 32;
+ cylinders = (ulong)capacity / (heads * sectors);
- /*
+ /*
* Handle extended translation size for logical drives
* > 1Gb
*/
- if ((ulong)capacity >= 0x200000) {
- heads = 255;
- sectors = 63;
- cylinders = (ulong)capacity / (heads * sectors);
- }
+ if ((ulong)capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ cylinders = (ulong)capacity / (heads * sectors);
+ }
- /* return result */
- geom[0] = heads;
- geom[1] = sectors;
- geom[2] = cylinders;
- }
- else {
+ /* return result */
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = cylinders;
+ } else {
if (scsi_partsize(bdev, capacity, geom))
return 0;
@@ -2855,14 +2737,12 @@ megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,
* scatter-gather list pointer, passthru and extended passthru structure
* pointers.
*/
-static int
-mega_init_scb(adapter_t *adapter)
+static int mega_init_scb(adapter_t *adapter)
{
- scb_t *scb;
- int i;
-
- for( i = 0; i < adapter->max_cmds; i++ ) {
+ scb_t *scb;
+ int i;
+ for (i = 0; i < adapter->max_cmds; i++) {
scb = &adapter->scb_list[i];
scb->sgl64 = NULL;
@@ -2871,46 +2751,49 @@ mega_init_scb(adapter_t *adapter)
scb->epthru = NULL;
}
- for( i = 0; i < adapter->max_cmds; i++ ) {
-
+ for (i = 0; i < adapter->max_cmds; i++) {
scb = &adapter->scb_list[i];
scb->idx = i;
- scb->sgl64 = dma_alloc_coherent(&adapter->dev->dev,
- sizeof(mega_sgl64) * adapter->sglen,
- &scb->sgl_dma_addr, GFP_KERNEL);
+ scb->sgl64 =
+ dma_alloc_coherent(&adapter->dev->dev,
+ sizeof(mega_sgl64) * adapter->sglen,
+ &scb->sgl_dma_addr, GFP_KERNEL);
scb->sgl = (mega_sglist *)scb->sgl64;
- if( !scb->sgl ) {
- dev_warn(&adapter->dev->dev, "RAID: Can't allocate sglist\n");
+ if (!scb->sgl) {
+ dev_warn(&adapter->dev->dev,
+ "RAID: Can't allocate sglist\n");
mega_free_sgl(adapter);
return -1;
}
- scb->pthru = dma_alloc_coherent(&adapter->dev->dev,
- sizeof(mega_passthru),
- &scb->pthru_dma_addr, GFP_KERNEL);
+ scb->pthru =
+ dma_alloc_coherent(&adapter->dev->dev,
+ sizeof(mega_passthru),
+ &scb->pthru_dma_addr, GFP_KERNEL);
- if( !scb->pthru ) {
- dev_warn(&adapter->dev->dev, "RAID: Can't allocate passthru\n");
+ if (!scb->pthru) {
+ dev_warn(&adapter->dev->dev,
+ "RAID: Can't allocate passthru\n");
mega_free_sgl(adapter);
return -1;
}
- scb->epthru = dma_alloc_coherent(&adapter->dev->dev,
- sizeof(mega_ext_passthru),
- &scb->epthru_dma_addr, GFP_KERNEL);
+ scb->epthru =
+ dma_alloc_coherent(&adapter->dev->dev,
+ sizeof(mega_ext_passthru),
+ &scb->epthru_dma_addr, GFP_KERNEL);
- if( !scb->epthru ) {
+ if (!scb->epthru) {
dev_warn(&adapter->dev->dev,
- "Can't allocate extended passthru\n");
+ "Can't allocate extended passthru\n");
mega_free_sgl(adapter);
return -1;
}
-
scb->dma_type = MEGA_DMA_TYPE_NONE;
/*
@@ -2926,27 +2809,25 @@ mega_init_scb(adapter_t *adapter)
return 0;
}
-
/**
* megadev_open()
* @inode: unused
* @filep: unused
*
* Routines for the character/ioctl interface to the driver. Find out if this
- * is a valid open.
+ * is a valid open.
*/
-static int
-megadev_open (struct inode *inode, struct file *filep)
+static int megadev_open(struct inode *inode, struct file *filep)
{
/*
* Only allow superuser to access private ioctl interface
*/
- if( !capable(CAP_SYS_ADMIN) ) return -EACCES;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
return 0;
}
-
/**
* megadev_ioctl()
* @filep: Our device file
@@ -2958,31 +2839,31 @@ megadev_open (struct inode *inode, struct file *filep)
* ioctl to new ioctl command), and issue a synchronous command to the
* controller.
*/
-static int
-megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static int megadev_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long arg)
{
- adapter_t *adapter;
- nitioctl_t uioc;
- int adapno;
- int rval;
- mega_passthru __user *upthru; /* user address for passthru */
- mega_passthru *pthru; /* copy user passthru here */
- dma_addr_t pthru_dma_hndl;
- void *data = NULL; /* data to be transferred */
- dma_addr_t data_dma_hndl; /* dma handle for data xfer area */
- megacmd_t mc;
+ adapter_t *adapter;
+ nitioctl_t uioc;
+ int adapno;
+ int rval;
+ mega_passthru __user *upthru; /* user address for passthru */
+ mega_passthru *pthru; /* copy user passthru here */
+ dma_addr_t pthru_dma_hndl;
+ void *data = NULL; /* data to be transferred */
+ dma_addr_t data_dma_hndl; /* dma handle for data xfer area */
+ megacmd_t mc;
#if MEGA_HAVE_STATS
- megastat_t __user *ustats = NULL;
- int num_ldrv = 0;
+ megastat_t __user *ustats = NULL;
+ int num_ldrv = 0;
#endif
- u32 uxferaddr = 0;
- struct pci_dev *pdev;
+ u32 uxferaddr = 0;
+ struct pci_dev *pdev;
/*
* Make sure only USCSICMD are issued through this interface.
* MIMD application would still fire different command.
*/
- if( (_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD) ) {
+ if ((_IOC_TYPE(cmd) != MEGAIOC_MAGIC) && (cmd != USCSICMD)) {
return -EINVAL;
}
@@ -2995,20 +2876,18 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
* addresses.
*/
memset(&uioc, 0, sizeof(nitioctl_t));
- if( (rval = mega_m_to_n( (void __user *)arg, &uioc)) != 0 )
+ if ((rval = mega_m_to_n((void __user *)arg, &uioc)) != 0)
return rval;
-
- switch( uioc.opcode ) {
-
+ switch (uioc.opcode) {
case GET_DRIVER_VER:
- if( put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr) )
+ if (put_user(driver_ver, (u32 __user *)uioc.uioc_uaddr))
return (-EFAULT);
break;
case GET_N_ADAP:
- if( put_user(hba_count, (u32 __user *)uioc.uioc_uaddr) )
+ if (put_user(hba_count, (u32 __user *)uioc.uioc_uaddr))
return (-EFAULT);
/*
@@ -3023,11 +2902,11 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* Which adapter
*/
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
+ if ((adapno = GETADAP(uioc.adapno)) >= hba_count)
return (-ENODEV);
- if( copy_to_user(uioc.uioc_uaddr, mcontroller+adapno,
- sizeof(struct mcontroller)) )
+ if (copy_to_user(uioc.uioc_uaddr, mcontroller + adapno,
+ sizeof(struct mcontroller)))
return (-EFAULT);
break;
@@ -3037,43 +2916,44 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* Which adapter
*/
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
+ if ((adapno = GETADAP(uioc.adapno)) >= hba_count)
return (-ENODEV);
adapter = hba_soft_state[adapno];
ustats = uioc.uioc_uaddr;
- if( copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)) )
+ if (copy_from_user(&num_ldrv, &ustats->num_ldrv, sizeof(int)))
return (-EFAULT);
/*
* Check for the validity of the logical drive number
*/
- if( num_ldrv >= MAX_LOGICAL_DRIVES_40LD ) return -EINVAL;
+ if (num_ldrv >= MAX_LOGICAL_DRIVES_40LD)
+ return -EINVAL;
- if( copy_to_user(ustats->nreads, adapter->nreads,
- num_ldrv*sizeof(u32)) )
+ if (copy_to_user(ustats->nreads, adapter->nreads,
+ num_ldrv * sizeof(u32)))
return -EFAULT;
- if( copy_to_user(ustats->nreadblocks, adapter->nreadblocks,
- num_ldrv*sizeof(u32)) )
+ if (copy_to_user(ustats->nreadblocks, adapter->nreadblocks,
+ num_ldrv * sizeof(u32)))
return -EFAULT;
- if( copy_to_user(ustats->nwrites, adapter->nwrites,
- num_ldrv*sizeof(u32)) )
+ if (copy_to_user(ustats->nwrites, adapter->nwrites,
+ num_ldrv * sizeof(u32)))
return -EFAULT;
- if( copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks,
- num_ldrv*sizeof(u32)) )
+ if (copy_to_user(ustats->nwriteblocks, adapter->nwriteblocks,
+ num_ldrv * sizeof(u32)))
return -EFAULT;
- if( copy_to_user(ustats->rd_errors, adapter->rd_errors,
- num_ldrv*sizeof(u32)) )
+ if (copy_to_user(ustats->rd_errors, adapter->rd_errors,
+ num_ldrv * sizeof(u32)))
return -EFAULT;
- if( copy_to_user(ustats->wr_errors, adapter->wr_errors,
- num_ldrv*sizeof(u32)) )
+ if (copy_to_user(ustats->wr_errors, adapter->wr_errors,
+ num_ldrv * sizeof(u32)))
return -EFAULT;
return 0;
@@ -3084,7 +2964,7 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* Which adapter
*/
- if( (adapno = GETADAP(uioc.adapno)) >= hba_count )
+ if ((adapno = GETADAP(uioc.adapno)) >= hba_count)
return (-ENODEV);
adapter = hba_soft_state[adapno];
@@ -3093,22 +2973,22 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
* Deletion of logical drive is a special case. The adapter
* should be quiescent before this command is issued.
*/
- if( uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
- uioc.uioc_rmbox[2] == OP_DEL_LOGDRV ) {
-
+ if (uioc.uioc_rmbox[0] == FC_DEL_LOGDRV &&
+ uioc.uioc_rmbox[2] == OP_DEL_LOGDRV) {
/*
* Do we support this feature
*/
- if( !adapter->support_random_del ) {
- dev_warn(&adapter->dev->dev, "logdrv "
- "delete on non-supporting F/W\n");
+ if (!adapter->support_random_del) {
+ dev_warn(&adapter->dev->dev,
+ "logdrv "
+ "delete on non-supporting F/W\n");
return (-EINVAL);
}
- rval = mega_del_logdrv( adapter, uioc.uioc_rmbox[3] );
+ rval = mega_del_logdrv(adapter, uioc.uioc_rmbox[3]);
- if( rval == 0 ) {
+ if (rval == 0) {
memset(&mc, 0, sizeof(megacmd_t));
mc.status = rval;
@@ -3122,9 +3002,8 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
* This interface only support the regular passthru commands.
* Reject extended passthru and 64-bit passthru
*/
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
- uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU ) {
-
+ if (uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU64 ||
+ uioc.uioc_rmbox[0] == MEGA_MBOXCMD_EXTPTHRU) {
dev_warn(&adapter->dev->dev, "rejected passthru\n");
return (-EINVAL);
@@ -3134,18 +3013,18 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
* For all internal commands, the buffer must be allocated in
* <4GB address range
*/
- if( make_local_pdev(adapter, &pdev) != 0 )
+ if (make_local_pdev(adapter, &pdev) != 0)
return -EIO;
/* Is it a passthru command or a DCMD */
- if( uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU ) {
+ if (uioc.uioc_rmbox[0] == MEGA_MBOXCMD_PASSTHRU) {
/* Passthru commands */
pthru = dma_alloc_coherent(&pdev->dev,
sizeof(mega_passthru),
&pthru_dma_hndl, GFP_KERNEL);
- if( pthru == NULL ) {
+ if (pthru == NULL) {
free_local_pdev(pdev);
return (-ENOMEM);
}
@@ -3153,17 +3032,18 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* The user passthru structure
*/
- upthru = (mega_passthru __user *)(unsigned long)MBOX(uioc)->xferaddr;
+ upthru = (mega_passthru __user *)(unsigned long)MBOX(
+ uioc)
+ ->xferaddr;
/*
* Copy in the user passthru here.
*/
- if( copy_from_user(pthru, upthru,
- sizeof(mega_passthru)) ) {
-
+ if (copy_from_user(pthru, upthru,
+ sizeof(mega_passthru))) {
dma_free_coherent(&pdev->dev,
- sizeof(mega_passthru),
- pthru, pthru_dma_hndl);
+ sizeof(mega_passthru), pthru,
+ pthru_dma_hndl);
free_local_pdev(pdev);
@@ -3173,13 +3053,13 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* Is there a data transfer
*/
- if( pthru->dataxferlen ) {
+ if (pthru->dataxferlen) {
data = dma_alloc_coherent(&pdev->dev,
pthru->dataxferlen,
&data_dma_hndl,
GFP_KERNEL);
- if( data == NULL ) {
+ if (data == NULL) {
dma_free_coherent(&pdev->dev,
sizeof(mega_passthru),
pthru,
@@ -3198,16 +3078,17 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
pthru->dataxferaddr = data_dma_hndl;
}
-
/*
* Is data coming down-stream
*/
- if( pthru->dataxferlen && (uioc.flags & UIOC_WR) ) {
+ if (pthru->dataxferlen && (uioc.flags & UIOC_WR)) {
/*
* Get the user data
*/
- if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
- pthru->dataxferlen) ) {
+ if (copy_from_user(data,
+ (char __user *)(unsigned long)
+ uxferaddr,
+ pthru->dataxferlen)) {
rval = (-EFAULT);
goto freemem_and_return;
}
@@ -3225,15 +3106,16 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
rval = mega_n_to_m((void __user *)arg, &mc);
- if( rval ) goto freemem_and_return;
-
+ if (rval)
+ goto freemem_and_return;
/*
* Is data going up-stream
*/
- if( pthru->dataxferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
- pthru->dataxferlen) ) {
+ if (pthru->dataxferlen && (uioc.flags & UIOC_RD)) {
+ if (copy_to_user((char __user *)(unsigned long)
+ uxferaddr,
+ data, pthru->dataxferlen)) {
rval = (-EFAULT);
}
}
@@ -3243,11 +3125,11 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
* whether the user has asked for it or not.
*/
if (copy_to_user(upthru->reqsensearea,
- pthru->reqsensearea, 14))
+ pthru->reqsensearea, 14))
rval = -EFAULT;
-freemem_and_return:
- if( pthru->dataxferlen ) {
+ freemem_and_return:
+ if (pthru->dataxferlen) {
dma_free_coherent(&pdev->dev,
pthru->dataxferlen, data,
data_dma_hndl);
@@ -3259,20 +3141,19 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
free_local_pdev(pdev);
return rval;
- }
- else {
+ } else {
/* DCMD commands */
/*
* Is there a data transfer
*/
- if( uioc.xferlen ) {
+ if (uioc.xferlen) {
data = dma_alloc_coherent(&pdev->dev,
uioc.xferlen,
&data_dma_hndl,
GFP_KERNEL);
- if( data == NULL ) {
+ if (data == NULL) {
free_local_pdev(pdev);
return (-ENOMEM);
}
@@ -3283,13 +3164,14 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* Is data coming down-stream
*/
- if( uioc.xferlen && (uioc.flags & UIOC_WR) ) {
+ if (uioc.xferlen && (uioc.flags & UIOC_WR)) {
/*
* Get the user data
*/
- if( copy_from_user(data, (char __user *)(unsigned long) uxferaddr,
- uioc.xferlen) ) {
-
+ if (copy_from_user(data,
+ (char __user *)(unsigned long)
+ uxferaddr,
+ uioc.xferlen)) {
dma_free_coherent(&pdev->dev,
uioc.xferlen, data,
data_dma_hndl);
@@ -3311,8 +3193,8 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
rval = mega_n_to_m((void __user *)arg, &mc);
- if( rval ) {
- if( uioc.xferlen ) {
+ if (rval) {
+ if (uioc.xferlen) {
dma_free_coherent(&pdev->dev,
uioc.xferlen, data,
data_dma_hndl);
@@ -3326,15 +3208,15 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
/*
* Is data going up-stream
*/
- if( uioc.xferlen && (uioc.flags & UIOC_RD) ) {
- if( copy_to_user((char __user *)(unsigned long) uxferaddr, data,
- uioc.xferlen) ) {
-
+ if (uioc.xferlen && (uioc.flags & UIOC_RD)) {
+ if (copy_to_user((char __user *)(unsigned long)
+ uxferaddr,
+ data, uioc.xferlen)) {
rval = (-EFAULT);
}
}
- if( uioc.xferlen ) {
+ if (uioc.xferlen) {
dma_free_coherent(&pdev->dev, uioc.xferlen,
data, data_dma_hndl);
}
@@ -3351,8 +3233,8 @@ megadev_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
return 0;
}
-static long
-megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
+static long megadev_unlocked_ioctl(struct file *filep, unsigned int cmd,
+ unsigned long arg)
{
int ret;
@@ -3373,14 +3255,12 @@ megadev_unlocked_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
*
* Converts the older mimd ioctl structure to newer NIT structure
*/
-static int
-mega_m_to_n(void __user *arg, nitioctl_t *uioc)
+static int mega_m_to_n(void __user *arg, nitioctl_t *uioc)
{
- struct uioctl_t uioc_mimd;
- char signature[8] = {0};
- u8 opcode;
- u8 subopcode;
-
+ struct uioctl_t uioc_mimd;
+ char signature[8] = { 0 };
+ u8 opcode;
+ u8 subopcode;
/*
* check is the application conforms to NIT. We do not have to do much
@@ -3389,11 +3269,10 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
* beginning of the structure.
*/
- if( copy_from_user(signature, arg, 7) )
+ if (copy_from_user(signature, arg, 7))
return (-EFAULT);
- if( memcmp(signature, "MEGANIT", 7) == 0 ) {
-
+ if (memcmp(signature, "MEGANIT", 7) == 0) {
/*
* NOTE NOTE: The nit ioctl is still under flux because of
* change of mailbox definition, in HPE. No applications yet
@@ -3402,7 +3281,7 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
*/
return -EINVAL;
#if 0
- if( copy_from_user(uioc, arg, sizeof(nitioctl_t)) )
+ if (copy_from_user(uioc, arg, sizeof(nitioctl_t)))
return (-EFAULT);
return 0;
#endif
@@ -3413,10 +3292,9 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
*
* Get the user ioctl structure
*/
- if( copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)) )
+ if (copy_from_user(&uioc_mimd, arg, sizeof(struct uioctl_t)))
return (-EFAULT);
-
/*
* Get the opcode and subopcode for the commands
*/
@@ -3427,30 +3305,28 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
case 0x82:
switch (subopcode) {
-
- case MEGAIOC_QDRVRVER: /* Query driver version */
+ case MEGAIOC_QDRVRVER: /* Query driver version */
uioc->opcode = GET_DRIVER_VER;
uioc->uioc_uaddr = uioc_mimd.data;
break;
- case MEGAIOC_QNADAP: /* Get # of adapters */
+ case MEGAIOC_QNADAP: /* Get # of adapters */
uioc->opcode = GET_N_ADAP;
uioc->uioc_uaddr = uioc_mimd.data;
break;
- case MEGAIOC_QADAPINFO: /* Get adapter information */
+ case MEGAIOC_QADAPINFO: /* Get adapter information */
uioc->opcode = GET_ADAP_INFO;
uioc->adapno = uioc_mimd.ui.fcs.adapno;
uioc->uioc_uaddr = uioc_mimd.data;
break;
default:
- return(-EINVAL);
+ return (-EINVAL);
}
break;
-
case 0x81:
uioc->opcode = MBOX_CMD;
@@ -3460,8 +3336,10 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
uioc->xferlen = uioc_mimd.ui.fcs.length;
- if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
- if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
+ if (uioc_mimd.outlen)
+ uioc->flags = UIOC_RD;
+ if (uioc_mimd.inlen)
+ uioc->flags |= UIOC_WR;
break;
@@ -3476,16 +3354,18 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
* Choose the xferlen bigger of input and output data
*/
uioc->xferlen = uioc_mimd.outlen > uioc_mimd.inlen ?
- uioc_mimd.outlen : uioc_mimd.inlen;
+ uioc_mimd.outlen :
+ uioc_mimd.inlen;
- if( uioc_mimd.outlen ) uioc->flags = UIOC_RD;
- if( uioc_mimd.inlen ) uioc->flags |= UIOC_WR;
+ if (uioc_mimd.outlen)
+ uioc->flags = UIOC_RD;
+ if (uioc_mimd.inlen)
+ uioc->flags |= UIOC_WR;
break;
default:
return (-EINVAL);
-
}
return 0;
@@ -3499,53 +3379,52 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
* Updates the status information to the application, depending on application
* conforms to older mimd ioctl interface or newer NIT ioctl interface
*/
-static int
-mega_n_to_m(void __user *arg, megacmd_t *mc)
+static int mega_n_to_m(void __user *arg, megacmd_t *mc)
{
- nitioctl_t __user *uiocp;
- megacmd_t __user *umc;
- mega_passthru __user *upthru;
- struct uioctl_t __user *uioc_mimd;
- char signature[8] = {0};
+ nitioctl_t __user *uiocp;
+ megacmd_t __user *umc;
+ mega_passthru __user *upthru;
+ struct uioctl_t __user *uioc_mimd;
+ char signature[8] = { 0 };
/*
* check is the application conforms to NIT.
*/
- if( copy_from_user(signature, arg, 7) )
+ if (copy_from_user(signature, arg, 7))
return -EFAULT;
- if( memcmp(signature, "MEGANIT", 7) == 0 ) {
-
+ if (memcmp(signature, "MEGANIT", 7) == 0) {
uiocp = arg;
- if( put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status) )
+ if (put_user(mc->status, (u8 __user *)&MBOX_P(uiocp)->status))
return (-EFAULT);
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
+ if (mc->cmd == MEGA_MBOXCMD_PASSTHRU) {
umc = MBOX_P(uiocp);
- if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
+ if (get_user(upthru, (mega_passthru __user *
+ __user *)&umc->xferaddr))
return -EFAULT;
- if( put_user(mc->status, (u8 __user *)&upthru->scsistatus))
+ if (put_user(mc->status,
+ (u8 __user *)&upthru->scsistatus))
return (-EFAULT);
}
- }
- else {
+ } else {
uioc_mimd = arg;
- if( put_user(mc->status, (u8 __user *)&uioc_mimd->mbox[17]) )
+ if (put_user(mc->status, (u8 __user *)&uioc_mimd->mbox[17]))
return (-EFAULT);
- if( mc->cmd == MEGA_MBOXCMD_PASSTHRU ) {
-
+ if (mc->cmd == MEGA_MBOXCMD_PASSTHRU) {
umc = (megacmd_t __user *)uioc_mimd->mbox;
- if (get_user(upthru, (mega_passthru __user * __user *)&umc->xferaddr))
+ if (get_user(upthru, (mega_passthru __user *
+ __user *)&umc->xferaddr))
return (-EFAULT);
- if( put_user(mc->status, (u8 __user *)&upthru->scsistatus) )
+ if (put_user(mc->status,
+ (u8 __user *)&upthru->scsistatus))
return (-EFAULT);
}
}
@@ -3553,7 +3432,6 @@ mega_n_to_m(void __user *arg, megacmd_t *mc)
return 0;
}
-
/*
* MEGARAID 'FW' commands.
*/
@@ -3564,11 +3442,10 @@ mega_n_to_m(void __user *arg, megacmd_t *mc)
*
* issue command to find out if the BIOS is enabled for this controller
*/
-static int
-mega_is_bios_enabled(adapter_t *adapter)
+static int mega_is_bios_enabled(adapter_t *adapter)
{
struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
+ unsigned char *raw_mbox = (u8 *)&mbox;
memset(&mbox, 0, sizeof(mbox));
@@ -3584,7 +3461,6 @@ mega_is_bios_enabled(adapter_t *adapter)
return *(char *)adapter->mega_buffer;
}
-
/**
* mega_enum_raid_scsi()
* @adapter: pointer to our soft state
@@ -3593,11 +3469,10 @@ mega_is_bios_enabled(adapter_t *adapter)
* differentiate the virtual channels and physical channels and to support
* ROMB feature and non-disk devices.
*/
-static void
-mega_enum_raid_scsi(adapter_t *adapter)
+static void mega_enum_raid_scsi(adapter_t *adapter)
{
struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
+ unsigned char *raw_mbox = (u8 *)&mbox;
int i;
memset(&mbox, 0, sizeof(mbox));
@@ -3618,26 +3493,23 @@ mega_enum_raid_scsi(adapter_t *adapter)
*/
adapter->mega_ch_class = 0xFF;
- if(!issue_scb_block(adapter, raw_mbox)) {
+ if (!issue_scb_block(adapter, raw_mbox)) {
adapter->mega_ch_class = *((char *)adapter->mega_buffer);
-
}
- for( i = 0; i < adapter->product_info.nchannels; i++ ) {
- if( (adapter->mega_ch_class >> i) & 0x01 ) {
+ for (i = 0; i < adapter->product_info.nchannels; i++) {
+ if ((adapter->mega_ch_class >> i) & 0x01) {
dev_info(&adapter->dev->dev, "channel[%d] is raid\n",
- i);
- }
- else {
+ i);
+ } else {
dev_info(&adapter->dev->dev, "channel[%d] is scsi\n",
- i);
+ i);
}
}
return;
}
-
/**
* mega_get_boot_drv()
* @adapter: pointer to our soft state
@@ -3645,16 +3517,15 @@ mega_enum_raid_scsi(adapter_t *adapter)
* Find out which device is the boot device. Note, any logical drive or any
* phyical device (e.g., a CDROM) can be designated as a boot device.
*/
-static void
-mega_get_boot_drv(adapter_t *adapter)
+static void mega_get_boot_drv(adapter_t *adapter)
{
- struct private_bios_data *prv_bios_data;
+ struct private_bios_data *prv_bios_data;
struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
- u16 cksum = 0;
- u8 *cksum_p;
- u8 boot_pdrv;
- int i;
+ unsigned char *raw_mbox = (u8 *)&mbox;
+ u16 cksum = 0;
+ u8 *cksum_p;
+ u8 boot_pdrv;
+ int i;
memset(&mbox, 0, sizeof(mbox));
@@ -3672,35 +3543,32 @@ mega_get_boot_drv(adapter_t *adapter)
adapter->boot_pdrv_ch = 0;
adapter->boot_pdrv_tgt = 0;
- if(issue_scb_block(adapter, raw_mbox) == 0) {
+ if (issue_scb_block(adapter, raw_mbox) == 0) {
prv_bios_data =
(struct private_bios_data *)adapter->mega_buffer;
cksum = 0;
cksum_p = (char *)prv_bios_data;
- for (i = 0; i < 14; i++ ) {
+ for (i = 0; i < 14; i++) {
cksum += (u16)(*cksum_p++);
}
- if (prv_bios_data->cksum == (u16)(0-cksum) ) {
-
+ if (prv_bios_data->cksum == (u16)(0 - cksum)) {
/*
* If MSB is set, a physical drive is set as boot
* device
*/
- if( prv_bios_data->boot_drv & 0x80 ) {
+ if (prv_bios_data->boot_drv & 0x80) {
adapter->boot_pdrv_enabled = 1;
boot_pdrv = prv_bios_data->boot_drv & 0x7F;
adapter->boot_pdrv_ch = boot_pdrv / 16;
adapter->boot_pdrv_tgt = boot_pdrv % 16;
- }
- else {
+ } else {
adapter->boot_ldrv_enabled = 1;
adapter->boot_ldrv = prv_bios_data->boot_drv;
}
}
}
-
}
/**
@@ -3710,11 +3578,10 @@ mega_get_boot_drv(adapter_t *adapter)
* Find out if this controller supports random deletion and addition of
* logical drives
*/
-static int
-mega_support_random_del(adapter_t *adapter)
+static int mega_support_random_del(adapter_t *adapter)
{
struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
+ unsigned char *raw_mbox = (u8 *)&mbox;
int rval;
memset(&mbox, 0, sizeof(mbox));
@@ -3730,18 +3597,16 @@ mega_support_random_del(adapter_t *adapter)
return !rval;
}
-
/**
* mega_support_ext_cdb()
* @adapter: pointer to our soft state
*
* Find out if this firmware support cdblen > 10
*/
-static int
-mega_support_ext_cdb(adapter_t *adapter)
+static int mega_support_ext_cdb(adapter_t *adapter)
{
struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
+ unsigned char *raw_mbox = (u8 *)&mbox;
int rval;
memset(&mbox, 0, sizeof(mbox));
@@ -3756,7 +3621,6 @@ mega_support_ext_cdb(adapter_t *adapter)
return !rval;
}
-
/**
* mega_del_logdrv()
* @adapter: pointer to our soft state
@@ -3765,8 +3629,7 @@ mega_support_ext_cdb(adapter_t *adapter)
* Delete the specified logical drive. It is the responsibility of the user
* app to let the OS know about this operation.
*/
-static int
-mega_del_logdrv(adapter_t *adapter, int logdrv)
+static int mega_del_logdrv(adapter_t *adapter, int logdrv)
{
unsigned long flags;
scb_t *scb;
@@ -3784,7 +3647,7 @@ mega_del_logdrv(adapter_t *adapter, int logdrv)
*/
while (atomic_read(&adapter->pend_cmds) > 0 ||
!list_empty(&adapter->pending_list))
- msleep(1000); /* sleep for 1s */
+ msleep(1000); /* sleep for 1s */
rval = mega_do_del_logdrv(adapter, logdrv);
@@ -3796,9 +3659,9 @@ mega_del_logdrv(adapter_t *adapter, int logdrv)
*/
if (adapter->read_ldidmap) {
struct list_head *pos;
- list_for_each(pos, &adapter->pending_list) {
+ list_for_each (pos, &adapter->pending_list) {
scb = list_entry(pos, scb_t, list);
- if (scb->pthru->logdrv < 0x80 )
+ if (scb->pthru->logdrv < 0x80)
scb->pthru->logdrv += 0x80;
}
}
@@ -3812,14 +3675,12 @@ mega_del_logdrv(adapter_t *adapter, int logdrv)
return rval;
}
-
-static int
-mega_do_del_logdrv(adapter_t *adapter, int logdrv)
+static int mega_do_del_logdrv(adapter_t *adapter, int logdrv)
{
- megacmd_t mc;
- int rval;
+ megacmd_t mc;
+ int rval;
- memset( &mc, 0, sizeof(megacmd_t));
+ memset(&mc, 0, sizeof(megacmd_t));
mc.cmd = FC_DEL_LOGDRV;
mc.opcode = OP_DEL_LOGDRV;
@@ -3828,7 +3689,7 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv)
rval = mega_internal_command(adapter, &mc, NULL);
/* log this event */
- if(rval) {
+ if (rval) {
dev_warn(&adapter->dev->dev, "Delete LD-%d failed", logdrv);
return rval;
}
@@ -3842,7 +3703,6 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv)
return rval;
}
-
/**
* mega_get_max_sgl()
* @adapter: pointer to our soft state
@@ -3850,11 +3710,10 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv)
* Find out the maximum number of scatter-gather elements supported by this
* version of the firmware
*/
-static void
-mega_get_max_sgl(adapter_t *adapter)
+static void mega_get_max_sgl(adapter_t *adapter)
{
- struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
+ struct mbox_out mbox;
+ unsigned char *raw_mbox = (u8 *)&mbox;
memset(&mbox, 0, sizeof(mbox));
@@ -3865,39 +3724,35 @@ mega_get_max_sgl(adapter_t *adapter)
raw_mbox[0] = MAIN_MISC_OPCODE;
raw_mbox[2] = GET_MAX_SG_SUPPORT;
-
- if( issue_scb_block(adapter, raw_mbox) ) {
+ if (issue_scb_block(adapter, raw_mbox)) {
/*
* f/w does not support this command. Choose the default value
*/
adapter->sglen = MIN_SGLIST;
- }
- else {
+ } else {
adapter->sglen = *((char *)adapter->mega_buffer);
/*
* Make sure this is not more than the resources we are
* planning to allocate
*/
- if ( adapter->sglen > MAX_SGLIST )
+ if (adapter->sglen > MAX_SGLIST)
adapter->sglen = MAX_SGLIST;
}
return;
}
-
/**
* mega_support_cluster()
* @adapter: pointer to our soft state
*
* Find out if this firmware support cluster calls.
*/
-static int
-mega_support_cluster(adapter_t *adapter)
+static int mega_support_cluster(adapter_t *adapter)
{
- struct mbox_out mbox;
- unsigned char *raw_mbox = (u8 *)&mbox;
+ struct mbox_out mbox;
+ unsigned char *raw_mbox = (u8 *)&mbox;
memset(&mbox, 0, sizeof(mbox));
@@ -3911,8 +3766,7 @@ mega_support_cluster(adapter_t *adapter)
*/
raw_mbox[0] = MEGA_GET_TARGET_ID;
- if( issue_scb_block(adapter, raw_mbox) == 0 ) {
-
+ if (issue_scb_block(adapter, raw_mbox) == 0) {
/*
* Cluster support available. Get the initiator target id.
* Tell our id to mid-layer too.
@@ -3936,32 +3790,29 @@ mega_support_cluster(adapter_t *adapter)
* We only issue direct mailbox commands from within the driver. ioctl()
* interface using these routines can issue passthru commands.
*/
-static int
-mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
+static int mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
{
- megacmd_t mc;
+ megacmd_t mc;
memset(&mc, 0, sizeof(megacmd_t));
- if( adapter->flag & BOARD_40LD ) {
+ if (adapter->flag & BOARD_40LD) {
mc.cmd = FC_NEW_CONFIG;
mc.opcode = NC_SUBOP_ENQUIRY3;
mc.subopcode = ENQ3_GET_SOLICITED_FULL;
- }
- else {
+ } else {
mc.cmd = MEGA_MBOXCMD_ADPEXTINQ;
}
mc.xferaddr = (u32)dma_handle;
- if ( mega_internal_command(adapter, &mc, NULL) != 0 ) {
+ if (mega_internal_command(adapter, &mc, NULL) != 0) {
return -1;
}
return 0;
}
-
/**
* mega_internal_dev_inquiry()
* @adapter: pointer to our soft state
@@ -3971,27 +3822,26 @@ mega_adapinq(adapter_t *adapter, dma_addr_t dma_handle)
*
* Issue the scsi inquiry for the specified device.
*/
-static int
-mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
- dma_addr_t buf_dma_handle)
+static int mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
+ dma_addr_t buf_dma_handle)
{
- mega_passthru *pthru;
- dma_addr_t pthru_dma_handle;
- megacmd_t mc;
- int rval;
- struct pci_dev *pdev;
-
+ mega_passthru *pthru;
+ dma_addr_t pthru_dma_handle;
+ megacmd_t mc;
+ int rval;
+ struct pci_dev *pdev;
/*
* For all internal commands, the buffer must be allocated in <4GB
* address range
*/
- if( make_local_pdev(adapter, &pdev) != 0 ) return -1;
+ if (make_local_pdev(adapter, &pdev) != 0)
+ return -1;
pthru = dma_alloc_coherent(&pdev->dev, sizeof(mega_passthru),
&pthru_dma_handle, GFP_KERNEL);
- if( pthru == NULL ) {
+ if (pthru == NULL) {
free_local_pdev(pdev);
return -1;
}
@@ -4003,7 +3853,7 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
pthru->channel = (adapter->flag & BOARD_40LD) ? 0 : ch;
- pthru->target = (adapter->flag & BOARD_40LD) ? (ch << 4)|tgt : tgt;
+ pthru->target = (adapter->flag & BOARD_40LD) ? (ch << 4) | tgt : tgt;
pthru->cdblen = 6;
@@ -4014,7 +3864,6 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
pthru->cdb[4] = 255;
pthru->cdb[5] = 0;
-
pthru->dataxferaddr = (u32)buf_dma_handle;
pthru->dataxferlen = 256;
@@ -4046,12 +3895,12 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch, u8 tgt,
*
* Note: parameter 'pthru' is null for non-passthru commands.
*/
-static int
-mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
+static int mega_internal_command(adapter_t *adapter, megacmd_t *mc,
+ mega_passthru *pthru)
{
unsigned long flags;
- scb_t *scb;
- int rval;
+ scb_t *scb;
+ int rval;
/*
* The internal commands share one command id and hence are
@@ -4095,7 +3944,7 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
*/
if (rval && trace_level) {
dev_info(&adapter->dev->dev, "cmd [%x, %x, %x] status:[%x]\n",
- mc->cmd, mc->opcode, mc->subopcode, rval);
+ mc->cmd, mc->opcode, mc->subopcode, rval);
}
mutex_unlock(&adapter->int_mtx);
@@ -4103,26 +3952,26 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
}
static struct scsi_host_template megaraid_template = {
- .module = THIS_MODULE,
- .name = "MegaRAID",
- .proc_name = "megaraid_legacy",
- .info = megaraid_info,
- .queuecommand = megaraid_queue,
- .bios_param = megaraid_biosparam,
- .max_sectors = MAX_SECTORS_PER_IO,
- .can_queue = MAX_COMMANDS,
- .this_id = DEFAULT_INITIATOR_ID,
- .sg_tablesize = MAX_SGLIST,
- .cmd_per_lun = DEF_CMD_PER_LUN,
- .eh_abort_handler = megaraid_abort,
- .eh_device_reset_handler = megaraid_reset,
- .eh_bus_reset_handler = megaraid_reset,
- .eh_host_reset_handler = megaraid_reset,
- .no_write_same = 1,
+ .module = THIS_MODULE,
+ .name = "MegaRAID",
+ .proc_name = "megaraid_legacy",
+ .info = megaraid_info,
+ .queuecommand = megaraid_queue,
+ .bios_param = megaraid_biosparam,
+ .max_sectors = MAX_SECTORS_PER_IO,
+ .can_queue = MAX_COMMANDS,
+ .this_id = DEFAULT_INITIATOR_ID,
+ .sg_tablesize = MAX_SGLIST,
+ .cmd_per_lun = DEF_CMD_PER_LUN,
+ .eh_abort_handler = megaraid_abort,
+ .eh_device_reset_handler = megaraid_reset,
+ .eh_bus_reset_handler = megaraid_reset,
+ .eh_host_reset_handler = megaraid_reset,
+ .no_write_same = 1,
};
-static int
-megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+static int megaraid_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
{
struct Scsi_Host *host;
adapter_t *adapter;
@@ -4179,8 +4028,8 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
subsysvid = pdev->subsystem_vendor;
subsysid = pdev->subsystem_device;
- dev_notice(&pdev->dev, "found 0x%4.04x:0x%4.04x\n",
- id->vendor, id->device);
+ dev_notice(&pdev->dev, "found 0x%4.04x:0x%4.04x\n", id->vendor,
+ id->device);
/* Read the base port and IRQ from PCI */
mega_baseport = pci_resource_start(pdev, 0);
@@ -4217,12 +4066,12 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
memset(adapter, 0, sizeof(adapter_t));
dev_notice(&pdev->dev,
- "scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n",
- host->host_no, mega_baseport, irq);
+ "scsi%d:Found MegaRAID controller at 0x%lx, IRQ:%d\n",
+ host->host_no, mega_baseport, irq);
adapter->base = mega_baseport;
if (flag & BOARD_MEMMAP)
- adapter->mmio_base = (void __iomem *) mega_baseport;
+ adapter->mmio_base = (void __iomem *)mega_baseport;
INIT_LIST_HEAD(&adapter->free_list);
INIT_LIST_HEAD(&adapter->pending_list);
@@ -4251,25 +4100,26 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/*
* Allocate buffer to issue internal commands.
*/
- adapter->mega_buffer = dma_alloc_coherent(&adapter->dev->dev,
- MEGA_BUFFER_SIZE,
- &adapter->buf_dma_handle,
- GFP_KERNEL);
+ adapter->mega_buffer =
+ dma_alloc_coherent(&adapter->dev->dev, MEGA_BUFFER_SIZE,
+ &adapter->buf_dma_handle, GFP_KERNEL);
if (!adapter->mega_buffer) {
dev_warn(&pdev->dev, "out of RAM\n");
goto out_host_put;
}
- adapter->scb_list = kmalloc_array(MAX_COMMANDS, sizeof(scb_t),
- GFP_KERNEL);
+ adapter->scb_list =
+ kmalloc_array(MAX_COMMANDS, sizeof(scb_t), GFP_KERNEL);
if (!adapter->scb_list) {
dev_warn(&pdev->dev, "out of RAM\n");
goto out_free_cmd_buffer;
}
- if (request_irq(irq, (adapter->flag & BOARD_MEMMAP) ?
- megaraid_isr_memmapped : megaraid_isr_iomapped,
- IRQF_SHARED, "megaraid", adapter)) {
+ if (request_irq(irq,
+ (adapter->flag & BOARD_MEMMAP) ?
+ megaraid_isr_memmapped :
+ megaraid_isr_iomapped,
+ IRQF_SHARED, "megaraid", adapter)) {
dev_warn(&pdev->dev, "Couldn't register IRQ %d!\n", irq);
goto out_free_scb_list;
}
@@ -4288,24 +4138,22 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
* Which firmware
*/
if (!strcmp(adapter->fw_version, "3.00") ||
- !strcmp(adapter->fw_version, "3.01")) {
-
+ !strcmp(adapter->fw_version, "3.01")) {
dev_warn(&pdev->dev,
- "Your card is a Dell PERC "
- "2/SC RAID controller with "
- "firmware\nmegaraid: 3.00 or 3.01. "
- "This driver is known to have "
- "corruption issues\nmegaraid: with "
- "those firmware versions on this "
- "specific card. In order\nmegaraid: "
- "to protect your data, please upgrade "
- "your firmware to version\nmegaraid: "
- "3.10 or later, available from the "
- "Dell Technical Support web\n"
- "megaraid: site at\nhttp://support."
- "dell.com/us/en/filelib/download/"
- "index.asp?fileid=2940\n"
- );
+ "Your card is a Dell PERC "
+ "2/SC RAID controller with "
+ "firmware\nmegaraid: 3.00 or 3.01. "
+ "This driver is known to have "
+ "corruption issues\nmegaraid: with "
+ "those firmware versions on this "
+ "specific card. In order\nmegaraid: "
+ "to protect your data, please upgrade "
+ "your firmware to version\nmegaraid: "
+ "3.10 or later, available from the "
+ "Dell Technical Support web\n"
+ "megaraid: site at\nhttp://support."
+ "dell.com/us/en/filelib/download/"
+ "index.asp?fileid=2940\n");
}
}
@@ -4322,14 +4170,13 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
*/
if (!strcmp(adapter->fw_version, "H01.07") ||
!strcmp(adapter->fw_version, "H01.08") ||
- !strcmp(adapter->fw_version, "H01.09") ) {
- dev_warn(&pdev->dev,
- "Firmware H.01.07, "
- "H.01.08, and H.01.09 on 1M/2M "
- "controllers\n"
- "do not support 64 bit "
- "addressing.\nDISABLING "
- "64 bit support.\n");
+ !strcmp(adapter->fw_version, "H01.09")) {
+ dev_warn(&pdev->dev, "Firmware H.01.07, "
+ "H.01.08, and H.01.09 on 1M/2M "
+ "controllers\n"
+ "do not support 64 bit "
+ "addressing.\nDISABLING "
+ "64 bit support.\n");
adapter->flag &= ~BOARD_64BIT;
}
}
@@ -4356,14 +4203,14 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (adapter->boot_pdrv_enabled) {
j = adapter->product_info.nchannels;
- for( i = 0; i < j; i++ )
+ for (i = 0; i < j; i++)
adapter->logdrv_chan[i] = 0;
- for( i = j; i < NVIRT_CHAN + j; i++ )
+ for (i = j; i < NVIRT_CHAN + j; i++)
adapter->logdrv_chan[i] = 1;
} else {
for (i = 0; i < NVIRT_CHAN; i++)
adapter->logdrv_chan[i] = 1;
- for (i = NVIRT_CHAN; i < MAX_CHANNELS+NVIRT_CHAN; i++)
+ for (i = NVIRT_CHAN; i < MAX_CHANNELS + NVIRT_CHAN; i++)
adapter->logdrv_chan[i] = 0;
adapter->mega_ch_class <<= NVIRT_CHAN;
}
@@ -4372,7 +4219,7 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
* Do we support random deletion and addition of logical
* drives
*/
- adapter->read_ldidmap = 0; /* set it after first logdrv
+ adapter->read_ldidmap = 0; /* set it after first logdrv
delete cmd */
adapter->support_random_del = mega_support_random_del(adapter);
@@ -4404,22 +4251,21 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
mcontroller[i].numldrv = adapter->numldrv;
mcontroller[i].pcibus = pci_bus;
mcontroller[i].pcidev = id->device;
- mcontroller[i].pcifun = PCI_FUNC (pci_dev_func);
+ mcontroller[i].pcifun = PCI_FUNC(pci_dev_func);
mcontroller[i].pciid = -1;
mcontroller[i].pcivendor = id->vendor;
mcontroller[i].pcislot = PCI_SLOT(pci_dev_func);
mcontroller[i].uid = (pci_bus << 8) | pci_dev_func;
-
/* Set the Mode of addressing to 64 bit if we can */
if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
adapter->has_64bit_addr = 1;
- } else {
+ } else {
dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
adapter->has_64bit_addr = 0;
}
-
+
mutex_init(&adapter->int_mtx);
init_completion(&adapter->int_waitq);
@@ -4436,9 +4282,8 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
*/
adapter->has_cluster = mega_support_cluster(adapter);
if (adapter->has_cluster) {
- dev_notice(&pdev->dev,
- "Cluster driver, initiator id:%d\n",
- adapter->this_id);
+ dev_notice(&pdev->dev, "Cluster driver, initiator id:%d\n",
+ adapter->this_id);
}
#endif
@@ -4454,38 +4299,37 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
hba_count++;
return 0;
- out_free_mbox:
+out_free_mbox:
dma_free_coherent(&adapter->dev->dev, sizeof(mbox64_t),
adapter->una_mbox64, adapter->una_mbox64_dma);
- out_free_irq:
+out_free_irq:
free_irq(adapter->host->irq, adapter);
- out_free_scb_list:
+out_free_scb_list:
kfree(adapter->scb_list);
- out_free_cmd_buffer:
+out_free_cmd_buffer:
dma_free_coherent(&adapter->dev->dev, MEGA_BUFFER_SIZE,
adapter->mega_buffer, adapter->buf_dma_handle);
- out_host_put:
+out_host_put:
scsi_host_put(host);
- out_iounmap:
+out_iounmap:
if (flag & BOARD_MEMMAP)
iounmap((void *)mega_baseport);
- out_release_region:
+out_release_region:
if (flag & BOARD_MEMMAP)
release_mem_region(tbase, 128);
else
release_region(mega_baseport, 16);
- out_disable_device:
+out_disable_device:
pci_disable_device(pdev);
- out:
+out:
return error;
}
-static void
-__megaraid_shutdown(adapter_t *adapter)
+static void __megaraid_shutdown(adapter_t *adapter)
{
- u_char raw_mbox[sizeof(struct mbox_out)];
- mbox_t *mbox = (mbox_t *)raw_mbox;
- int i;
+ u_char raw_mbox[sizeof(struct mbox_out)];
+ mbox_t *mbox = (mbox_t *)raw_mbox;
+ int i;
/* Flush adapter cache */
memset(&mbox->m_out, 0, sizeof(raw_mbox));
@@ -4502,7 +4346,7 @@ __megaraid_shutdown(adapter_t *adapter)
/* Issue a blocking (interrupts disabled) command to the card */
issue_scb_block(adapter, raw_mbox);
-
+
if (atomic_read(&adapter->pend_cmds) > 0)
dev_warn(&adapter->dev->dev, "pending commands!!\n");
@@ -4514,8 +4358,7 @@ __megaraid_shutdown(adapter_t *adapter)
mdelay(1000);
}
-static void
-megaraid_remove_one(struct pci_dev *pdev)
+static void megaraid_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
adapter_t *adapter = (adapter_t *)host->hostdata;
@@ -4549,8 +4392,7 @@ megaraid_remove_one(struct pci_dev *pdev)
hba_count--;
}
-static void
-megaraid_shutdown(struct pci_dev *pdev)
+static void megaraid_shutdown(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
adapter_t *adapter = (adapter_t *)host->hostdata;
@@ -4559,22 +4401,24 @@ megaraid_shutdown(struct pci_dev *pdev)
}
static struct pci_device_id megaraid_pci_tbl[] = {
- {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {0,}
+ { PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID, PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, 0 },
+ { PCI_VENDOR_ID_AMI, PCI_DEVICE_ID_AMI_MEGARAID2, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_AMI_MEGARAID3, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ {
+ 0,
+ }
};
MODULE_DEVICE_TABLE(pci, megaraid_pci_tbl);
static struct pci_driver megaraid_pci_driver = {
- .name = "megaraid_legacy",
- .id_table = megaraid_pci_tbl,
- .probe = megaraid_probe_one,
- .remove = megaraid_remove_one,
- .shutdown = megaraid_shutdown,
+ .name = "megaraid_legacy",
+ .id_table = megaraid_pci_tbl,
+ .probe = megaraid_probe_one,
+ .remove = megaraid_remove_one,
+ .shutdown = megaraid_shutdown,
};
static int __init megaraid_init(void)
@@ -4590,7 +4434,7 @@ static int __init megaraid_init(void)
mega_proc_dir_entry = proc_mkdir("megaraid", NULL);
if (!mega_proc_dir_entry) {
printk(KERN_WARNING
- "megaraid: failed to create megaraid root\n");
+ "megaraid: failed to create megaraid root\n");
}
#endif
error = pci_register_driver(&megaraid_pci_driver);
@@ -4610,7 +4454,7 @@ static int __init megaraid_init(void)
major = register_chrdev(0, "megadev_legacy", &megadev_fops);
if (!major) {
printk(KERN_WARNING
- "megaraid: failed to register char device\n");
+ "megaraid: failed to register char device\n");
}
return 0;
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index cce23a086fbe4..1cf8737f01995 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -5,8 +5,7 @@
#include <linux/spinlock.h>
#include <linux/mutex.h>
-#define MEGARAID_VERSION \
- "v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)\n"
+#define MEGARAID_VERSION "v2.00.4 (Release Date: Thu Feb 9 08:51:30 EST 2006)\n"
/*
* Driver features - change the values to enable or disable features in the
@@ -19,14 +18,14 @@
* performance. Useful if the nature of the I/O is sequential. It is not very
* useful for random natured I/Os.
*/
-#define MEGA_HAVE_COALESCING 0
+#define MEGA_HAVE_COALESCING 0
/*
* Clustering support - Set this flag if you are planning to use the
* clustering services provided by the megaraid controllers and planning to
* setup a cluster
*/
-#define MEGA_HAVE_CLUSTERING 1
+#define MEGA_HAVE_CLUSTERING 1
/*
* Driver statistics - Set this flag if you are interested in statics about
@@ -35,56 +34,59 @@
* interface and through the private ioctl. Setting this flag has a
* performance penalty.
*/
-#define MEGA_HAVE_STATS 0
+#define MEGA_HAVE_STATS 0
/*
* Enhanced /proc interface - This feature will allow you to have a more
* detailed /proc interface for megaraid driver. E.g., a real time update of
* the status of the logical drives, battery status, physical drives etc.
*/
-#define MEGA_HAVE_ENH_PROC 1
+#define MEGA_HAVE_ENH_PROC 1
-#define MAX_DEV_TYPE 32
+#define MAX_DEV_TYPE 32
-#define PCI_DEVICE_ID_DISCOVERY 0x000E
-#define PCI_DEVICE_ID_PERC4_DI 0x000F
-#define PCI_DEVICE_ID_PERC4_QC_VERDE 0x0407
+#define PCI_DEVICE_ID_DISCOVERY 0x000E
+#define PCI_DEVICE_ID_PERC4_DI 0x000F
+#define PCI_DEVICE_ID_PERC4_QC_VERDE 0x0407
-#define HBA_SIGNATURE 0x3344
-#define HBA_SIGNATURE_471 0xCCCC
-#define HBA_SIGNATURE_64BIT 0x0299
+#define HBA_SIGNATURE 0x3344
+#define HBA_SIGNATURE_471 0xCCCC
+#define HBA_SIGNATURE_64BIT 0x0299
-#define MBOX_BUSY_WAIT 10 /* wait for up to 10 usec for
+#define MBOX_BUSY_WAIT \
+ 10 /* wait for up to 10 usec for
mailbox to be free */
-#define DEFAULT_INITIATOR_ID 7
+#define DEFAULT_INITIATOR_ID 7
-#define MAX_SGLIST 64 /* max supported in f/w */
-#define MIN_SGLIST 26 /* guaranteed to support these many */
-#define MAX_COMMANDS 126
-#define CMDID_INT_CMDS MAX_COMMANDS+1 /* make sure CMDID_INT_CMDS
+#define MAX_SGLIST 64 /* max supported in f/w */
+#define MIN_SGLIST 26 /* guaranteed to support these many */
+#define MAX_COMMANDS 126
+#define CMDID_INT_CMDS \
+ MAX_COMMANDS + 1 /* make sure CMDID_INT_CMDS
is less than max commands
supported by any f/w */
-#define MAX_CDB_LEN 10
-#define MAX_EXT_CDB_LEN 16 /* we support cdb length up to 16 */
-
-#define DEF_CMD_PER_LUN 63
-#define MAX_CMD_PER_LUN MAX_COMMANDS
-#define MAX_FIRMWARE_STATUS 46
-#define MAX_XFER_PER_CMD (64*1024)
-#define MAX_SECTORS_PER_IO 128
-
-#define MAX_LOGICAL_DRIVES_40LD 40
-#define FC_MAX_PHYSICAL_DEVICES 256
-#define MAX_LOGICAL_DRIVES_8LD 8
-#define MAX_CHANNELS 5
-#define MAX_TARGET 15
-#define MAX_PHYSICAL_DRIVES MAX_CHANNELS*MAX_TARGET
-#define MAX_ROW_SIZE_40LD 32
-#define MAX_ROW_SIZE_8LD 8
-#define MAX_SPAN_DEPTH 8
-
-#define NVIRT_CHAN 4 /* # of virtual channels to represent
+#define MAX_CDB_LEN 10
+#define MAX_EXT_CDB_LEN 16 /* we support cdb length up to 16 */
+
+#define DEF_CMD_PER_LUN 63
+#define MAX_CMD_PER_LUN MAX_COMMANDS
+#define MAX_FIRMWARE_STATUS 46
+#define MAX_XFER_PER_CMD (64 * 1024)
+#define MAX_SECTORS_PER_IO 128
+
+#define MAX_LOGICAL_DRIVES_40LD 40
+#define FC_MAX_PHYSICAL_DEVICES 256
+#define MAX_LOGICAL_DRIVES_8LD 8
+#define MAX_CHANNELS 5
+#define MAX_TARGET 15
+#define MAX_PHYSICAL_DRIVES MAX_CHANNELS *MAX_TARGET
+#define MAX_ROW_SIZE_40LD 32
+#define MAX_ROW_SIZE_8LD 8
+#define MAX_SPAN_DEPTH 8
+
+#define NVIRT_CHAN \
+ 4 /* # of virtual channels to represent
up to 60 logical drives */
struct mbox_out {
/* 0x0 */ u8 cmd;
@@ -95,7 +97,7 @@ struct mbox_out {
/* 0xC */ u8 logdrv;
/* 0xD */ u8 numsgelements;
/* 0xE */ u8 resvd;
-} __attribute__ ((packed));
+} __attribute__((packed));
struct mbox_in {
/* 0xF */ volatile u8 busy;
@@ -104,35 +106,34 @@ struct mbox_in {
/* 0x12 */ volatile u8 completed[MAX_FIRMWARE_STATUS];
volatile u8 poll;
volatile u8 ack;
-} __attribute__ ((packed));
+} __attribute__((packed));
typedef struct {
- struct mbox_out m_out;
- struct mbox_in m_in;
-} __attribute__ ((packed)) mbox_t;
+ struct mbox_out m_out;
+ struct mbox_in m_in;
+} __attribute__((packed)) mbox_t;
typedef struct {
u32 xfer_segment_lo;
u32 xfer_segment_hi;
mbox_t mbox;
-} __attribute__ ((packed)) mbox64_t;
-
+} __attribute__((packed)) mbox64_t;
/*
* Passthru definitions
*/
-#define MAX_REQ_SENSE_LEN 0x20
+#define MAX_REQ_SENSE_LEN 0x20
typedef struct {
- u8 timeout:3; /* 0=6sec/1=60sec/2=10min/3=3hrs */
- u8 ars:1;
- u8 reserved:3;
- u8 islogical:1;
- u8 logdrv; /* if islogical == 1 */
- u8 channel; /* if islogical == 0 */
- u8 target; /* if islogical == 0 */
- u8 queuetag; /* unused */
- u8 queueaction; /* unused */
+ u8 timeout : 3; /* 0=6sec/1=60sec/2=10min/3=3hrs */
+ u8 ars : 1;
+ u8 reserved : 3;
+ u8 islogical : 1;
+ u8 logdrv; /* if islogical == 1 */
+ u8 channel; /* if islogical == 0 */
+ u8 target; /* if islogical == 0 */
+ u8 queuetag; /* unused */
+ u8 queueaction; /* unused */
u8 cdb[MAX_CDB_LEN];
u8 cdblen;
u8 reqsenselen;
@@ -141,24 +142,23 @@ typedef struct {
u8 scsistatus;
u32 dataxferaddr;
u32 dataxferlen;
-} __attribute__ ((packed)) mega_passthru;
-
+} __attribute__((packed)) mega_passthru;
/*
* Extended passthru: support CDB > 10 bytes
*/
typedef struct {
- u8 timeout:3; /* 0=6sec/1=60sec/2=10min/3=3hrs */
- u8 ars:1;
- u8 rsvd1:1;
- u8 cd_rom:1;
- u8 rsvd2:1;
- u8 islogical:1;
- u8 logdrv; /* if islogical == 1 */
- u8 channel; /* if islogical == 0 */
- u8 target; /* if islogical == 0 */
- u8 queuetag; /* unused */
- u8 queueaction; /* unused */
+ u8 timeout : 3; /* 0=6sec/1=60sec/2=10min/3=3hrs */
+ u8 ars : 1;
+ u8 rsvd1 : 1;
+ u8 cd_rom : 1;
+ u8 rsvd2 : 1;
+ u8 islogical : 1;
+ u8 logdrv; /* if islogical == 1 */
+ u8 channel; /* if islogical == 0 */
+ u8 target; /* if islogical == 0 */
+ u8 queuetag; /* unused */
+ u8 queueaction; /* unused */
u8 cdblen;
u8 rsvd3;
u8 cdb[MAX_EXT_CDB_LEN];
@@ -169,182 +169,180 @@ typedef struct {
u8 rsvd4;
u32 dataxferaddr;
u32 dataxferlen;
-} __attribute__ ((packed)) mega_ext_passthru;
+} __attribute__((packed)) mega_ext_passthru;
typedef struct {
u64 address;
u32 length;
-} __attribute__ ((packed)) mega_sgl64;
+} __attribute__((packed)) mega_sgl64;
typedef struct {
u32 address;
u32 length;
-} __attribute__ ((packed)) mega_sglist;
-
+} __attribute__((packed)) mega_sglist;
/* Queued command data */
typedef struct {
- int idx;
- u32 state;
- struct list_head list;
- u8 raw_mbox[66];
- u32 dma_type;
- u32 dma_direction;
-
- struct scsi_cmnd *cmd;
- dma_addr_t dma_h_bulkdata;
- dma_addr_t dma_h_sgdata;
-
- mega_sglist *sgl;
- mega_sgl64 *sgl64;
- dma_addr_t sgl_dma_addr;
-
- mega_passthru *pthru;
- dma_addr_t pthru_dma_addr;
- mega_ext_passthru *epthru;
- dma_addr_t epthru_dma_addr;
+ int idx;
+ u32 state;
+ struct list_head list;
+ u8 raw_mbox[66];
+ u32 dma_type;
+ u32 dma_direction;
+
+ struct scsi_cmnd *cmd;
+ dma_addr_t dma_h_bulkdata;
+ dma_addr_t dma_h_sgdata;
+
+ mega_sglist *sgl;
+ mega_sgl64 *sgl64;
+ dma_addr_t sgl_dma_addr;
+
+ mega_passthru *pthru;
+ dma_addr_t pthru_dma_addr;
+ mega_ext_passthru *epthru;
+ dma_addr_t epthru_dma_addr;
} scb_t;
/*
* Flags to follow the scb as it transitions between various stages
*/
-#define SCB_FREE 0x0000 /* on the free list */
-#define SCB_ACTIVE 0x0001 /* off the free list */
-#define SCB_PENDQ 0x0002 /* on the pending queue */
-#define SCB_ISSUED 0x0004 /* issued - owner f/w */
-#define SCB_ABORT 0x0008 /* Got an abort for this one */
-#define SCB_RESET 0x0010 /* Got a reset for this one */
+#define SCB_FREE 0x0000 /* on the free list */
+#define SCB_ACTIVE 0x0001 /* off the free list */
+#define SCB_PENDQ 0x0002 /* on the pending queue */
+#define SCB_ISSUED 0x0004 /* issued - owner f/w */
+#define SCB_ABORT 0x0008 /* Got an abort for this one */
+#define SCB_RESET 0x0010 /* Got a reset for this one */
/*
* Utilities declare this strcture size as 1024 bytes. So more fields can
* be added in future.
*/
typedef struct {
- u32 data_size; /* current size in bytes (not including resvd) */
+ u32 data_size; /* current size in bytes (not including resvd) */
- u32 config_signature;
- /* Current value is 0x00282008
+ u32 config_signature;
+ /* Current value is 0x00282008
* 0x28=MAX_LOGICAL_DRIVES,
* 0x20=Number of stripes and
* 0x08=Number of spans */
- u8 fw_version[16]; /* printable ASCI string */
- u8 bios_version[16]; /* printable ASCI string */
- u8 product_name[80]; /* printable ASCI string */
+ u8 fw_version[16]; /* printable ASCI string */
+ u8 bios_version[16]; /* printable ASCI string */
+ u8 product_name[80]; /* printable ASCI string */
- u8 max_commands; /* Max. concurrent commands supported */
- u8 nchannels; /* Number of SCSI Channels detected */
- u8 fc_loop_present; /* Number of Fibre Loops detected */
- u8 mem_type; /* EDO, FPM, SDRAM etc */
+ u8 max_commands; /* Max. concurrent commands supported */
+ u8 nchannels; /* Number of SCSI Channels detected */
+ u8 fc_loop_present; /* Number of Fibre Loops detected */
+ u8 mem_type; /* EDO, FPM, SDRAM etc */
- u32 signature;
- u16 dram_size; /* In terms of MB */
- u16 subsysid;
+ u32 signature;
+ u16 dram_size; /* In terms of MB */
+ u16 subsysid;
- u16 subsysvid;
- u8 notify_counters;
- u8 pad1k[889]; /* 135 + 889 resvd = 1024 total size */
-} __attribute__ ((packed)) mega_product_info;
+ u16 subsysvid;
+ u8 notify_counters;
+ u8 pad1k[889]; /* 135 + 889 resvd = 1024 total size */
+} __attribute__((packed)) mega_product_info;
struct notify {
- u32 global_counter; /* Any change increments this counter */
+ u32 global_counter; /* Any change increments this counter */
- u8 param_counter; /* Indicates any params changed */
- u8 param_id; /* Param modified - defined below */
- u16 param_val; /* New val of last param modified */
+ u8 param_counter; /* Indicates any params changed */
+ u8 param_id; /* Param modified - defined below */
+ u16 param_val; /* New val of last param modified */
- u8 write_config_counter; /* write config occurred */
+ u8 write_config_counter; /* write config occurred */
u8 write_config_rsvd[3];
- u8 ldrv_op_counter; /* Indicates ldrv op started/completed */
- u8 ldrv_opid; /* ldrv num */
- u8 ldrv_opcmd; /* ldrv operation - defined below */
- u8 ldrv_opstatus; /* status of the operation */
+ u8 ldrv_op_counter; /* Indicates ldrv op started/completed */
+ u8 ldrv_opid; /* ldrv num */
+ u8 ldrv_opcmd; /* ldrv operation - defined below */
+ u8 ldrv_opstatus; /* status of the operation */
- u8 ldrv_state_counter; /* Indicates change of ldrv state */
- u8 ldrv_state_id; /* ldrv num */
- u8 ldrv_state_new; /* New state */
- u8 ldrv_state_old; /* old state */
+ u8 ldrv_state_counter; /* Indicates change of ldrv state */
+ u8 ldrv_state_id; /* ldrv num */
+ u8 ldrv_state_new; /* New state */
+ u8 ldrv_state_old; /* old state */
- u8 pdrv_state_counter; /* Indicates change of ldrv state */
- u8 pdrv_state_id; /* pdrv id */
- u8 pdrv_state_new; /* New state */
- u8 pdrv_state_old; /* old state */
+ u8 pdrv_state_counter; /* Indicates change of ldrv state */
+ u8 pdrv_state_id; /* pdrv id */
+ u8 pdrv_state_new; /* New state */
+ u8 pdrv_state_old; /* old state */
- u8 pdrv_fmt_counter; /* Indicates pdrv format started/over */
- u8 pdrv_fmt_id; /* pdrv id */
- u8 pdrv_fmt_val; /* format started/over */
+ u8 pdrv_fmt_counter; /* Indicates pdrv format started/over */
+ u8 pdrv_fmt_id; /* pdrv id */
+ u8 pdrv_fmt_val; /* format started/over */
u8 pdrv_fmt_rsvd;
- u8 targ_xfer_counter; /* Indicates SCSI-2 Xfer rate change */
- u8 targ_xfer_id; /* pdrv Id */
- u8 targ_xfer_val; /* new Xfer params of last pdrv */
+ u8 targ_xfer_counter; /* Indicates SCSI-2 Xfer rate change */
+ u8 targ_xfer_id; /* pdrv Id */
+ u8 targ_xfer_val; /* new Xfer params of last pdrv */
u8 targ_xfer_rsvd;
- u8 fcloop_id_chg_counter; /* Indicates loopid changed */
- u8 fcloopid_pdrvid; /* pdrv id */
- u8 fcloop_id0; /* loopid on fc loop 0 */
- u8 fcloop_id1; /* loopid on fc loop 1 */
+ u8 fcloop_id_chg_counter; /* Indicates loopid changed */
+ u8 fcloopid_pdrvid; /* pdrv id */
+ u8 fcloop_id0; /* loopid on fc loop 0 */
+ u8 fcloop_id1; /* loopid on fc loop 1 */
- u8 fcloop_state_counter; /* Indicates loop state changed */
- u8 fcloop_state0; /* state of fc loop 0 */
- u8 fcloop_state1; /* state of fc loop 1 */
+ u8 fcloop_state_counter; /* Indicates loop state changed */
+ u8 fcloop_state0; /* state of fc loop 0 */
+ u8 fcloop_state1; /* state of fc loop 1 */
u8 fcloop_state_rsvd;
-} __attribute__ ((packed));
+} __attribute__((packed));
-#define MAX_NOTIFY_SIZE 0x80
-#define CUR_NOTIFY_SIZE sizeof(struct notify)
+#define MAX_NOTIFY_SIZE 0x80
+#define CUR_NOTIFY_SIZE sizeof(struct notify)
typedef struct {
- u32 data_size; /* current size in bytes (not including resvd) */
+ u32 data_size; /* current size in bytes (not including resvd) */
struct notify notify;
- u8 notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE];
+ u8 notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE];
- u8 rebuild_rate; /* Rebuild rate (0% - 100%) */
- u8 cache_flush_interval; /* In terms of Seconds */
- u8 sense_alert;
- u8 drive_insert_count; /* drive insertion count */
+ u8 rebuild_rate; /* Rebuild rate (0% - 100%) */
+ u8 cache_flush_interval; /* In terms of Seconds */
+ u8 sense_alert;
+ u8 drive_insert_count; /* drive insertion count */
- u8 battery_status;
- u8 num_ldrv; /* No. of Log Drives configured */
- u8 recon_state[MAX_LOGICAL_DRIVES_40LD / 8]; /* State of
+ u8 battery_status;
+ u8 num_ldrv; /* No. of Log Drives configured */
+ u8 recon_state[MAX_LOGICAL_DRIVES_40LD / 8]; /* State of
reconstruct */
- u16 ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8]; /* logdrv
+ u16 ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8]; /* logdrv
Status */
- u32 ldrv_size[MAX_LOGICAL_DRIVES_40LD];/* Size of each log drv */
- u8 ldrv_prop[MAX_LOGICAL_DRIVES_40LD];
- u8 ldrv_state[MAX_LOGICAL_DRIVES_40LD];/* State of log drives */
- u8 pdrv_state[FC_MAX_PHYSICAL_DEVICES];/* State of phys drvs. */
- u16 pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16];
-
- u8 targ_xfer[80]; /* phys device transfer rate */
- u8 pad1k[263]; /* 761 + 263reserved = 1024 bytes total size */
-} __attribute__ ((packed)) mega_inquiry3;
+ u32 ldrv_size[MAX_LOGICAL_DRIVES_40LD]; /* Size of each log drv */
+ u8 ldrv_prop[MAX_LOGICAL_DRIVES_40LD];
+ u8 ldrv_state[MAX_LOGICAL_DRIVES_40LD]; /* State of log drives */
+ u8 pdrv_state[FC_MAX_PHYSICAL_DEVICES]; /* State of phys drvs. */
+ u16 pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16];
+ u8 targ_xfer[80]; /* phys device transfer rate */
+ u8 pad1k[263]; /* 761 + 263reserved = 1024 bytes total size */
+} __attribute__((packed)) mega_inquiry3;
/* Structures */
typedef struct {
- u8 max_commands; /* Max concurrent commands supported */
- u8 rebuild_rate; /* Rebuild rate - 0% thru 100% */
- u8 max_targ_per_chan; /* Max targ per channel */
- u8 nchannels; /* Number of channels on HBA */
- u8 fw_version[4]; /* Firmware version */
- u16 age_of_flash; /* Number of times FW has been flashed */
- u8 chip_set_value; /* Contents of 0xC0000832 */
- u8 dram_size; /* In MB */
- u8 cache_flush_interval; /* in seconds */
- u8 bios_version[4];
- u8 board_type;
- u8 sense_alert;
- u8 write_config_count; /* Increase with every configuration
+ u8 max_commands; /* Max concurrent commands supported */
+ u8 rebuild_rate; /* Rebuild rate - 0% thru 100% */
+ u8 max_targ_per_chan; /* Max targ per channel */
+ u8 nchannels; /* Number of channels on HBA */
+ u8 fw_version[4]; /* Firmware version */
+ u16 age_of_flash; /* Number of times FW has been flashed */
+ u8 chip_set_value; /* Contents of 0xC0000832 */
+ u8 dram_size; /* In MB */
+ u8 cache_flush_interval; /* in seconds */
+ u8 bios_version[4];
+ u8 board_type;
+ u8 sense_alert;
+ u8 write_config_count; /* Increase with every configuration
change */
- u8 drive_inserted_count; /* Increase with every drive inserted
+ u8 drive_inserted_count; /* Increase with every drive inserted
*/
- u8 inserted_drive; /* Channel:Id of inserted drive */
- u8 battery_status; /*
+ u8 inserted_drive; /* Channel:Id of inserted drive */
+ u8 battery_status; /*
* BIT 0: battery module missing
* BIT 1: VBAD
* BIT 2: temperature high
@@ -357,103 +355,99 @@ typedef struct {
* Bit 6: counter > 1000
* Bit 7: Undefined
*/
- u8 dec_fault_bus_info;
-} __attribute__ ((packed)) mega_adp_info;
-
+ u8 dec_fault_bus_info;
+} __attribute__((packed)) mega_adp_info;
typedef struct {
- u8 num_ldrv; /* Number of logical drives configured */
- u8 rsvd[3];
- u32 ldrv_size[MAX_LOGICAL_DRIVES_8LD];
- u8 ldrv_prop[MAX_LOGICAL_DRIVES_8LD];
- u8 ldrv_state[MAX_LOGICAL_DRIVES_8LD];
-} __attribute__ ((packed)) mega_ldrv_info;
+ u8 num_ldrv; /* Number of logical drives configured */
+ u8 rsvd[3];
+ u32 ldrv_size[MAX_LOGICAL_DRIVES_8LD];
+ u8 ldrv_prop[MAX_LOGICAL_DRIVES_8LD];
+ u8 ldrv_state[MAX_LOGICAL_DRIVES_8LD];
+} __attribute__((packed)) mega_ldrv_info;
typedef struct {
- u8 pdrv_state[MAX_PHYSICAL_DRIVES];
- u8 rsvd;
-} __attribute__ ((packed)) mega_pdrv_info;
+ u8 pdrv_state[MAX_PHYSICAL_DRIVES];
+ u8 rsvd;
+} __attribute__((packed)) mega_pdrv_info;
/* RAID inquiry: Mailbox command 0x05*/
typedef struct {
- mega_adp_info adapter_info;
- mega_ldrv_info logdrv_info;
- mega_pdrv_info pdrv_info;
-} __attribute__ ((packed)) mraid_inquiry;
-
+ mega_adp_info adapter_info;
+ mega_ldrv_info logdrv_info;
+ mega_pdrv_info pdrv_info;
+} __attribute__((packed)) mraid_inquiry;
/* RAID extended inquiry: Mailbox command 0x04*/
typedef struct {
- mraid_inquiry raid_inq;
- u16 phys_drv_format[MAX_CHANNELS];
- u8 stack_attn;
- u8 modem_status;
- u8 rsvd[2];
-} __attribute__ ((packed)) mraid_ext_inquiry;
-
+ mraid_inquiry raid_inq;
+ u16 phys_drv_format[MAX_CHANNELS];
+ u8 stack_attn;
+ u8 modem_status;
+ u8 rsvd[2];
+} __attribute__((packed)) mraid_ext_inquiry;
typedef struct {
- u8 channel;
- u8 target;
-}__attribute__ ((packed)) adp_device;
+ u8 channel;
+ u8 target;
+} __attribute__((packed)) adp_device;
typedef struct {
- u32 start_blk; /* starting block */
- u32 num_blks; /* # of blocks */
- adp_device device[MAX_ROW_SIZE_40LD];
-}__attribute__ ((packed)) adp_span_40ld;
+ u32 start_blk; /* starting block */
+ u32 num_blks; /* # of blocks */
+ adp_device device[MAX_ROW_SIZE_40LD];
+} __attribute__((packed)) adp_span_40ld;
typedef struct {
- u32 start_blk; /* starting block */
- u32 num_blks; /* # of blocks */
- adp_device device[MAX_ROW_SIZE_8LD];
-}__attribute__ ((packed)) adp_span_8ld;
+ u32 start_blk; /* starting block */
+ u32 num_blks; /* # of blocks */
+ adp_device device[MAX_ROW_SIZE_8LD];
+} __attribute__((packed)) adp_span_8ld;
typedef struct {
- u8 span_depth; /* Total # of spans */
- u8 level; /* RAID level */
- u8 read_ahead; /* read ahead, no read ahead, adaptive read
+ u8 span_depth; /* Total # of spans */
+ u8 level; /* RAID level */
+ u8 read_ahead; /* read ahead, no read ahead, adaptive read
ahead */
- u8 stripe_sz; /* Encoded stripe size */
- u8 status; /* Status of the logical drive */
- u8 write_mode; /* write mode, write_through/write_back */
- u8 direct_io; /* direct io or through cache */
- u8 row_size; /* Number of stripes in a row */
-} __attribute__ ((packed)) logdrv_param;
+ u8 stripe_sz; /* Encoded stripe size */
+ u8 status; /* Status of the logical drive */
+ u8 write_mode; /* write mode, write_through/write_back */
+ u8 direct_io; /* direct io or through cache */
+ u8 row_size; /* Number of stripes in a row */
+} __attribute__((packed)) logdrv_param;
typedef struct {
- logdrv_param lparam;
- adp_span_40ld span[MAX_SPAN_DEPTH];
-}__attribute__ ((packed)) logdrv_40ld;
+ logdrv_param lparam;
+ adp_span_40ld span[MAX_SPAN_DEPTH];
+} __attribute__((packed)) logdrv_40ld;
typedef struct {
- logdrv_param lparam;
- adp_span_8ld span[MAX_SPAN_DEPTH];
-}__attribute__ ((packed)) logdrv_8ld;
+ logdrv_param lparam;
+ adp_span_8ld span[MAX_SPAN_DEPTH];
+} __attribute__((packed)) logdrv_8ld;
typedef struct {
- u8 type; /* Type of the device */
- u8 cur_status; /* current status of the device */
- u8 tag_depth; /* Level of tagging */
- u8 sync_neg; /* sync negotiation - ENABLE or DISABLE */
- u32 size; /* configurable size in terms of 512 byte
+ u8 type; /* Type of the device */
+ u8 cur_status; /* current status of the device */
+ u8 tag_depth; /* Level of tagging */
+ u8 sync_neg; /* sync negotiation - ENABLE or DISABLE */
+ u32 size; /* configurable size in terms of 512 byte
blocks */
-}__attribute__ ((packed)) phys_drv;
+} __attribute__((packed)) phys_drv;
typedef struct {
- u8 nlog_drives; /* number of logical drives */
- u8 resvd[3];
- logdrv_40ld ldrv[MAX_LOGICAL_DRIVES_40LD];
- phys_drv pdrv[MAX_PHYSICAL_DRIVES];
-}__attribute__ ((packed)) disk_array_40ld;
+ u8 nlog_drives; /* number of logical drives */
+ u8 resvd[3];
+ logdrv_40ld ldrv[MAX_LOGICAL_DRIVES_40LD];
+ phys_drv pdrv[MAX_PHYSICAL_DRIVES];
+} __attribute__((packed)) disk_array_40ld;
typedef struct {
- u8 nlog_drives; /* number of logical drives */
- u8 resvd[3];
- logdrv_8ld ldrv[MAX_LOGICAL_DRIVES_8LD];
- phys_drv pdrv[MAX_PHYSICAL_DRIVES];
-}__attribute__ ((packed)) disk_array_8ld;
-
+ u8 nlog_drives; /* number of logical drives */
+ u8 resvd[3];
+ logdrv_8ld ldrv[MAX_LOGICAL_DRIVES_8LD];
+ phys_drv pdrv[MAX_PHYSICAL_DRIVES];
+} __attribute__((packed)) disk_array_8ld;
/*
* User ioctl structure.
@@ -464,7 +458,7 @@ typedef struct {
* without being sent to the card.
*/
/* system call imposed limit. Change accordingly */
-#define IOCTL_MAX_DATALEN 4096
+#define IOCTL_MAX_DATALEN 4096
struct uioctl_t {
u32 inlen;
@@ -483,18 +477,18 @@ struct uioctl_t {
u8 *buffer;
#endif
u32 length;
- } __attribute__ ((packed)) fcs;
- } __attribute__ ((packed)) ui;
- u8 mbox[18]; /* 16 bytes + 2 status bytes */
+ } __attribute__((packed)) fcs;
+ } __attribute__((packed)) ui;
+ u8 mbox[18]; /* 16 bytes + 2 status bytes */
mega_passthru pthru;
#if BITS_PER_LONG == 32
- char __user *data; /* buffer <= 4096 for 0x80 commands */
+ char __user *data; /* buffer <= 4096 for 0x80 commands */
char pad[4];
#endif
#if BITS_PER_LONG == 64
char __user *data;
#endif
-} __attribute__ ((packed));
+} __attribute__((packed));
/*
* struct mcontroller is used to pass information about the controllers in the
@@ -522,28 +516,28 @@ struct mcontroller {
* mailbox structure used for internal commands
*/
typedef struct {
- u8 cmd;
- u8 cmdid;
- u8 opcode;
- u8 subopcode;
- u32 lba;
- u32 xferaddr;
- u8 logdrv;
- u8 rsvd[3];
- u8 numstatus;
- u8 status;
-} __attribute__ ((packed)) megacmd_t;
+ u8 cmd;
+ u8 cmdid;
+ u8 opcode;
+ u8 subopcode;
+ u32 lba;
+ u32 xferaddr;
+ u8 logdrv;
+ u8 rsvd[3];
+ u8 numstatus;
+ u8 status;
+} __attribute__((packed)) megacmd_t;
/*
* Defines for Driver IOCTL interface
*/
-#define MEGAIOC_MAGIC 'm'
+#define MEGAIOC_MAGIC 'm'
-#define MEGAIOC_QNADAP 'm' /* Query # of adapters */
-#define MEGAIOC_QDRVRVER 'e' /* Query driver version */
-#define MEGAIOC_QADAPINFO 'g' /* Query adapter information */
-#define MKADAP(adapno) (MEGAIOC_MAGIC << 8 | (adapno) )
-#define GETADAP(mkadap) ( (mkadap) ^ MEGAIOC_MAGIC << 8 )
+#define MEGAIOC_QNADAP 'm' /* Query # of adapters */
+#define MEGAIOC_QDRVRVER 'e' /* Query driver version */
+#define MEGAIOC_QADAPINFO 'g' /* Query adapter information */
+#define MKADAP(adapno) (MEGAIOC_MAGIC << 8 | (adapno))
+#define GETADAP(mkadap) ((mkadap) ^ MEGAIOC_MAGIC << 8)
/*
* Definition for the new ioctl interface (NIT)
@@ -552,30 +546,29 @@ typedef struct {
/*
* Vendor specific Group-7 commands
*/
-#define VENDOR_SPECIFIC_COMMANDS 0xE0
-#define MEGA_INTERNAL_CMD VENDOR_SPECIFIC_COMMANDS + 0x01
+#define VENDOR_SPECIFIC_COMMANDS 0xE0
+#define MEGA_INTERNAL_CMD VENDOR_SPECIFIC_COMMANDS + 0x01
/*
* The ioctl command. No other command shall be used for this interface
*/
-#define USCSICMD VENDOR_SPECIFIC_COMMANDS
+#define USCSICMD VENDOR_SPECIFIC_COMMANDS
/*
* Data direction flags
*/
-#define UIOC_RD 0x00001
-#define UIOC_WR 0x00002
+#define UIOC_RD 0x00001
+#define UIOC_WR 0x00002
/*
* ioctl opcodes
*/
-#define MBOX_CMD 0x00000 /* DCMD or passthru command */
-#define GET_DRIVER_VER 0x10000 /* Get driver version */
-#define GET_N_ADAP 0x20000 /* Get number of adapters */
-#define GET_ADAP_INFO 0x30000 /* Get information about a adapter */
-#define GET_CAP 0x40000 /* Get ioctl capabilities */
-#define GET_STATS 0x50000 /* Get statistics, including error info */
-
+#define MBOX_CMD 0x00000 /* DCMD or passthru command */
+#define GET_DRIVER_VER 0x10000 /* Get driver version */
+#define GET_N_ADAP 0x20000 /* Get number of adapters */
+#define GET_ADAP_INFO 0x30000 /* Get information about a adapter */
+#define GET_CAP 0x40000 /* Get ioctl capabilities */
+#define GET_STATS 0x50000 /* Get statistics, including error info */
/*
* The ioctl structure.
@@ -583,179 +576,170 @@ typedef struct {
* MBOX_P macro converts a nitioctl_t pointer to megacmd_t pointer.
*/
typedef struct {
- char signature[8]; /* Must contain "MEGANIT" */
- u32 opcode; /* opcode for the command */
- u32 adapno; /* adapter number */
+ char signature[8]; /* Must contain "MEGANIT" */
+ u32 opcode; /* opcode for the command */
+ u32 adapno; /* adapter number */
union {
- u8 __raw_mbox[18];
+ u8 __raw_mbox[18];
void __user *__uaddr; /* xferaddr for non-mbox cmds */
- }__ua;
+ } __ua;
-#define uioc_rmbox __ua.__raw_mbox
-#define MBOX(uioc) ((megacmd_t *)&((uioc).__ua.__raw_mbox[0]))
-#define MBOX_P(uioc) ((megacmd_t __user *)&((uioc)->__ua.__raw_mbox[0]))
-#define uioc_uaddr __ua.__uaddr
+#define uioc_rmbox __ua.__raw_mbox
+#define MBOX(uioc) ((megacmd_t *)&((uioc).__ua.__raw_mbox[0]))
+#define MBOX_P(uioc) ((megacmd_t __user *)&((uioc)->__ua.__raw_mbox[0]))
+#define uioc_uaddr __ua.__uaddr
- u32 xferlen; /* xferlen for DCMD and non-mbox
+ u32 xferlen; /* xferlen for DCMD and non-mbox
commands */
- u32 flags; /* data direction flags */
-}nitioctl_t;
-
+ u32 flags; /* data direction flags */
+} nitioctl_t;
/*
* I/O statistics for some applications like SNMP agent. The caller must
* provide the number of logical drives for which status should be reported.
*/
typedef struct {
- int num_ldrv; /* Number for logical drives for which the
+ int num_ldrv; /* Number for logical drives for which the
status should be reported. */
- u32 nreads[MAX_LOGICAL_DRIVES_40LD]; /* number of reads for
+ u32 nreads[MAX_LOGICAL_DRIVES_40LD]; /* number of reads for
each logical drive */
- u32 nreadblocks[MAX_LOGICAL_DRIVES_40LD]; /* number of blocks
+ u32 nreadblocks[MAX_LOGICAL_DRIVES_40LD]; /* number of blocks
read for each logical
drive */
- u32 nwrites[MAX_LOGICAL_DRIVES_40LD]; /* number of writes
+ u32 nwrites[MAX_LOGICAL_DRIVES_40LD]; /* number of writes
for each logical
drive */
- u32 nwriteblocks[MAX_LOGICAL_DRIVES_40LD]; /* number of blocks
+ u32 nwriteblocks[MAX_LOGICAL_DRIVES_40LD]; /* number of blocks
writes for each
logical drive */
- u32 rd_errors[MAX_LOGICAL_DRIVES_40LD]; /* number of read
+ u32 rd_errors[MAX_LOGICAL_DRIVES_40LD]; /* number of read
errors for each
logical drive */
- u32 wr_errors[MAX_LOGICAL_DRIVES_40LD]; /* number of write
+ u32 wr_errors[MAX_LOGICAL_DRIVES_40LD]; /* number of write
errors for each
logical drive */
-}megastat_t;
-
+} megastat_t;
struct private_bios_data {
- u8 geometry:4; /*
+ u8 geometry : 4; /*
* bits 0-3 - BIOS geometry
* 0x0001 - 1GB
* 0x0010 - 2GB
* 0x1000 - 8GB
* Others values are invalid
*/
- u8 unused:4; /* bits 4-7 are unused */
- u8 boot_drv; /*
+ u8 unused : 4; /* bits 4-7 are unused */
+ u8 boot_drv; /*
* logical drive set as boot drive
* 0..7 - for 8LD cards
* 0..39 - for 40LD cards
*/
- u8 rsvd[12];
- u16 cksum; /* 0-(sum of first 13 bytes of this structure) */
-} __attribute__ ((packed));
-
-
-
+ u8 rsvd[12];
+ u16 cksum; /* 0-(sum of first 13 bytes of this structure) */
+} __attribute__((packed));
/*
* Mailbox and firmware commands and subopcodes used in this driver.
*/
-#define MEGA_MBOXCMD_LREAD 0x01
-#define MEGA_MBOXCMD_LWRITE 0x02
-#define MEGA_MBOXCMD_PASSTHRU 0x03
-#define MEGA_MBOXCMD_ADPEXTINQ 0x04
-#define MEGA_MBOXCMD_ADAPTERINQ 0x05
-#define MEGA_MBOXCMD_LREAD64 0xA7
-#define MEGA_MBOXCMD_LWRITE64 0xA8
-#define MEGA_MBOXCMD_PASSTHRU64 0xC3
-#define MEGA_MBOXCMD_EXTPTHRU 0xE3
+#define MEGA_MBOXCMD_LREAD 0x01
+#define MEGA_MBOXCMD_LWRITE 0x02
+#define MEGA_MBOXCMD_PASSTHRU 0x03
+#define MEGA_MBOXCMD_ADPEXTINQ 0x04
+#define MEGA_MBOXCMD_ADAPTERINQ 0x05
+#define MEGA_MBOXCMD_LREAD64 0xA7
+#define MEGA_MBOXCMD_LWRITE64 0xA8
+#define MEGA_MBOXCMD_PASSTHRU64 0xC3
+#define MEGA_MBOXCMD_EXTPTHRU 0xE3
-#define MAIN_MISC_OPCODE 0xA4 /* f/w misc opcode */
-#define GET_MAX_SG_SUPPORT 0x01 /* get max sg len supported by f/w */
+#define MAIN_MISC_OPCODE 0xA4 /* f/w misc opcode */
+#define GET_MAX_SG_SUPPORT 0x01 /* get max sg len supported by f/w */
-#define FC_NEW_CONFIG 0xA1
-#define NC_SUBOP_PRODUCT_INFO 0x0E
-#define NC_SUBOP_ENQUIRY3 0x0F
-#define ENQ3_GET_SOLICITED_FULL 0x02
-#define OP_DCMD_READ_CONFIG 0x04
-#define NEW_READ_CONFIG_8LD 0x67
-#define READ_CONFIG_8LD 0x07
-#define FLUSH_ADAPTER 0x0A
-#define FLUSH_SYSTEM 0xFE
+#define FC_NEW_CONFIG 0xA1
+#define NC_SUBOP_PRODUCT_INFO 0x0E
+#define NC_SUBOP_ENQUIRY3 0x0F
+#define ENQ3_GET_SOLICITED_FULL 0x02
+#define OP_DCMD_READ_CONFIG 0x04
+#define NEW_READ_CONFIG_8LD 0x67
+#define READ_CONFIG_8LD 0x07
+#define FLUSH_ADAPTER 0x0A
+#define FLUSH_SYSTEM 0xFE
/*
* Command for random deletion of logical drives
*/
-#define FC_DEL_LOGDRV 0xA4 /* f/w command */
-#define OP_SUP_DEL_LOGDRV 0x2A /* is feature supported */
-#define OP_GET_LDID_MAP 0x18 /* get ldid and logdrv number map */
-#define OP_DEL_LOGDRV 0x1C /* delete logical drive */
+#define FC_DEL_LOGDRV 0xA4 /* f/w command */
+#define OP_SUP_DEL_LOGDRV 0x2A /* is feature supported */
+#define OP_GET_LDID_MAP 0x18 /* get ldid and logdrv number map */
+#define OP_DEL_LOGDRV 0x1C /* delete logical drive */
/*
* BIOS commands
*/
-#define IS_BIOS_ENABLED 0x62
-#define GET_BIOS 0x01
-#define CHNL_CLASS 0xA9
-#define GET_CHNL_CLASS 0x00
-#define SET_CHNL_CLASS 0x01
-#define CH_RAID 0x01
-#define CH_SCSI 0x00
-#define BIOS_PVT_DATA 0x40
-#define GET_BIOS_PVT_DATA 0x00
-
+#define IS_BIOS_ENABLED 0x62
+#define GET_BIOS 0x01
+#define CHNL_CLASS 0xA9
+#define GET_CHNL_CLASS 0x00
+#define SET_CHNL_CLASS 0x01
+#define CH_RAID 0x01
+#define CH_SCSI 0x00
+#define BIOS_PVT_DATA 0x40
+#define GET_BIOS_PVT_DATA 0x00
/*
* Commands to support clustering
*/
-#define MEGA_GET_TARGET_ID 0x7D
-#define MEGA_CLUSTER_OP 0x70
-#define MEGA_GET_CLUSTER_MODE 0x02
-#define MEGA_CLUSTER_CMD 0x6E
-#define MEGA_RESERVE_LD 0x01
-#define MEGA_RELEASE_LD 0x02
-#define MEGA_RESET_RESERVATIONS 0x03
-#define MEGA_RESERVATION_STATUS 0x04
-#define MEGA_RESERVE_PD 0x05
-#define MEGA_RELEASE_PD 0x06
-
+#define MEGA_GET_TARGET_ID 0x7D
+#define MEGA_CLUSTER_OP 0x70
+#define MEGA_GET_CLUSTER_MODE 0x02
+#define MEGA_CLUSTER_CMD 0x6E
+#define MEGA_RESERVE_LD 0x01
+#define MEGA_RELEASE_LD 0x02
+#define MEGA_RESET_RESERVATIONS 0x03
+#define MEGA_RESERVATION_STATUS 0x04
+#define MEGA_RESERVE_PD 0x05
+#define MEGA_RELEASE_PD 0x06
/*
* Module battery status
*/
-#define MEGA_BATT_MODULE_MISSING 0x01
-#define MEGA_BATT_LOW_VOLTAGE 0x02
-#define MEGA_BATT_TEMP_HIGH 0x04
-#define MEGA_BATT_PACK_MISSING 0x08
-#define MEGA_BATT_CHARGE_MASK 0x30
-#define MEGA_BATT_CHARGE_DONE 0x00
-#define MEGA_BATT_CHARGE_INPROG 0x10
-#define MEGA_BATT_CHARGE_FAIL 0x20
-#define MEGA_BATT_CYCLES_EXCEEDED 0x40
+#define MEGA_BATT_MODULE_MISSING 0x01
+#define MEGA_BATT_LOW_VOLTAGE 0x02
+#define MEGA_BATT_TEMP_HIGH 0x04
+#define MEGA_BATT_PACK_MISSING 0x08
+#define MEGA_BATT_CHARGE_MASK 0x30
+#define MEGA_BATT_CHARGE_DONE 0x00
+#define MEGA_BATT_CHARGE_INPROG 0x10
+#define MEGA_BATT_CHARGE_FAIL 0x20
+#define MEGA_BATT_CYCLES_EXCEEDED 0x40
/*
* Physical drive states.
*/
-#define PDRV_UNCNF 0
-#define PDRV_ONLINE 3
-#define PDRV_FAILED 4
-#define PDRV_RBLD 5
-#define PDRV_HOTSPARE 6
-
+#define PDRV_UNCNF 0
+#define PDRV_ONLINE 3
+#define PDRV_FAILED 4
+#define PDRV_RBLD 5
+#define PDRV_HOTSPARE 6
/*
* Raid logical drive states.
*/
-#define RDRV_OFFLINE 0
-#define RDRV_DEGRADED 1
-#define RDRV_OPTIMAL 2
-#define RDRV_DELETED 3
+#define RDRV_OFFLINE 0
+#define RDRV_DEGRADED 1
+#define RDRV_OPTIMAL 2
+#define RDRV_DELETED 3
/*
* Read, write and cache policies
*/
-#define NO_READ_AHEAD 0
-#define READ_AHEAD 1
-#define ADAP_READ_AHEAD 2
-#define WRMODE_WRITE_THRU 0
-#define WRMODE_WRITE_BACK 1
-#define CACHED_IO 0
-#define DIRECT_IO 1
-
+#define NO_READ_AHEAD 0
+#define READ_AHEAD 1
+#define ADAP_READ_AHEAD 2
+#define WRMODE_WRITE_THRU 0
+#define WRMODE_WRITE_BACK 1
+#define CACHED_IO 0
+#define DIRECT_IO 1
#define SCSI_LIST(scp) ((struct list_head *)(&(scp)->SCp))
@@ -763,169 +747,161 @@ struct private_bios_data {
* Each controller's soft state
*/
typedef struct {
- int this_id; /* our id, may set to different than 7 if
+ int this_id; /* our id, may set to different than 7 if
clustering is available */
- u32 flag;
+ u32 flag;
- unsigned long base;
- void __iomem *mmio_base;
+ unsigned long base;
+ void __iomem *mmio_base;
/* mbox64 with mbox not aligned on 16-byte boundary */
- mbox64_t *una_mbox64;
- dma_addr_t una_mbox64_dma;
+ mbox64_t *una_mbox64;
+ dma_addr_t una_mbox64_dma;
- volatile mbox64_t *mbox64;/* ptr to 64-bit mailbox */
- volatile mbox_t *mbox; /* ptr to standard mailbox */
- dma_addr_t mbox_dma;
+ volatile mbox64_t *mbox64; /* ptr to 64-bit mailbox */
+ volatile mbox_t *mbox; /* ptr to standard mailbox */
+ dma_addr_t mbox_dma;
- struct pci_dev *dev;
+ struct pci_dev *dev;
- struct list_head free_list;
- struct list_head pending_list;
- struct list_head completed_list;
+ struct list_head free_list;
+ struct list_head pending_list;
+ struct list_head completed_list;
- struct Scsi_Host *host;
+ struct Scsi_Host *host;
-#define MEGA_BUFFER_SIZE (2*1024)
- u8 *mega_buffer;
- dma_addr_t buf_dma_handle;
+#define MEGA_BUFFER_SIZE (2 * 1024)
+ u8 *mega_buffer;
+ dma_addr_t buf_dma_handle;
- mega_product_info product_info;
+ mega_product_info product_info;
- u8 max_cmds;
- scb_t *scb_list;
+ u8 max_cmds;
+ scb_t *scb_list;
- atomic_t pend_cmds; /* maintain a counter for pending
+ atomic_t pend_cmds; /* maintain a counter for pending
commands in firmware */
#if MEGA_HAVE_STATS
- u32 nreads[MAX_LOGICAL_DRIVES_40LD];
- u32 nreadblocks[MAX_LOGICAL_DRIVES_40LD];
- u32 nwrites[MAX_LOGICAL_DRIVES_40LD];
- u32 nwriteblocks[MAX_LOGICAL_DRIVES_40LD];
- u32 rd_errors[MAX_LOGICAL_DRIVES_40LD];
- u32 wr_errors[MAX_LOGICAL_DRIVES_40LD];
+ u32 nreads[MAX_LOGICAL_DRIVES_40LD];
+ u32 nreadblocks[MAX_LOGICAL_DRIVES_40LD];
+ u32 nwrites[MAX_LOGICAL_DRIVES_40LD];
+ u32 nwriteblocks[MAX_LOGICAL_DRIVES_40LD];
+ u32 rd_errors[MAX_LOGICAL_DRIVES_40LD];
+ u32 wr_errors[MAX_LOGICAL_DRIVES_40LD];
#endif
/* Host adapter parameters */
- u8 numldrv;
- u8 fw_version[7];
- u8 bios_version[7];
+ u8 numldrv;
+ u8 fw_version[7];
+ u8 bios_version[7];
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *controller_proc_dir_entry;
+ struct proc_dir_entry *controller_proc_dir_entry;
#endif
- int has_64bit_addr; /* are we using 64-bit addressing */
- int support_ext_cdb;
- int boot_ldrv_enabled;
- int boot_ldrv;
- int boot_pdrv_enabled; /* boot from physical drive */
- int boot_pdrv_ch; /* boot physical drive channel */
- int boot_pdrv_tgt; /* boot physical drive target */
+ int has_64bit_addr; /* are we using 64-bit addressing */
+ int support_ext_cdb;
+ int boot_ldrv_enabled;
+ int boot_ldrv;
+ int boot_pdrv_enabled; /* boot from physical drive */
+ int boot_pdrv_ch; /* boot physical drive channel */
+ int boot_pdrv_tgt; /* boot physical drive target */
-
- int support_random_del; /* Do we support random deletion of
+ int support_random_del; /* Do we support random deletion of
logdrvs */
- int read_ldidmap; /* set after logical drive deltion. The
+ int read_ldidmap; /* set after logical drive deltion. The
logical drive number must be read from the
map */
- atomic_t quiescent; /* a stage reached when delete logical
+ atomic_t quiescent; /* a stage reached when delete logical
drive needs to be done. Stop
sending requests to the hba till
delete operation is completed */
- spinlock_t lock;
+ spinlock_t lock;
- u8 logdrv_chan[MAX_CHANNELS+NVIRT_CHAN]; /* logical drive are on
+ u8 logdrv_chan[MAX_CHANNELS + NVIRT_CHAN]; /* logical drive are on
what channels. */
- int mega_ch_class;
+ int mega_ch_class;
- u8 sglen; /* f/w supported scatter-gather list length */
+ u8 sglen; /* f/w supported scatter-gather list length */
- scb_t int_scb;
- struct mutex int_mtx; /* To synchronize the internal
+ scb_t int_scb;
+ struct mutex int_mtx; /* To synchronize the internal
commands */
- int int_status; /* status of internal cmd */
- struct completion int_waitq; /* wait queue for internal
+ int int_status; /* status of internal cmd */
+ struct completion int_waitq; /* wait queue for internal
cmds */
- int has_cluster; /* cluster support on this HBA */
-}adapter_t;
-
+ int has_cluster; /* cluster support on this HBA */
+} adapter_t;
struct mega_hbas {
int is_bios_enabled;
adapter_t *hostdata_addr;
};
-
/*
* For state flag. Do not use LSB(8 bits) which are
* reserved for storing info about channels.
*/
-#define IN_ABORT 0x80000000L
-#define IN_RESET 0x40000000L
-#define BOARD_MEMMAP 0x20000000L
-#define BOARD_IOMAP 0x10000000L
-#define BOARD_40LD 0x08000000L
-#define BOARD_64BIT 0x04000000L
+#define IN_ABORT 0x80000000L
+#define IN_RESET 0x40000000L
+#define BOARD_MEMMAP 0x20000000L
+#define BOARD_IOMAP 0x10000000L
+#define BOARD_40LD 0x08000000L
+#define BOARD_64BIT 0x04000000L
-#define INTR_VALID 0x40
+#define INTR_VALID 0x40
-#define PCI_CONF_AMISIG 0xa0
-#define PCI_CONF_AMISIG64 0xa4
+#define PCI_CONF_AMISIG 0xa0
+#define PCI_CONF_AMISIG64 0xa4
-
-#define MEGA_DMA_TYPE_NONE 0xFFFF
-#define MEGA_BULK_DATA 0x0001
-#define MEGA_SGLIST 0x0002
+#define MEGA_DMA_TYPE_NONE 0xFFFF
+#define MEGA_BULK_DATA 0x0001
+#define MEGA_SGLIST 0x0002
/*
* Parameters for the io-mapped controllers
*/
/* I/O Port offsets */
-#define CMD_PORT 0x00
-#define ACK_PORT 0x00
-#define TOGGLE_PORT 0x01
-#define INTR_PORT 0x0a
-
-#define MBOX_BUSY_PORT 0x00
-#define MBOX_PORT0 0x04
-#define MBOX_PORT1 0x05
-#define MBOX_PORT2 0x06
-#define MBOX_PORT3 0x07
-#define ENABLE_MBOX_REGION 0x0B
+#define CMD_PORT 0x00
+#define ACK_PORT 0x00
+#define TOGGLE_PORT 0x01
+#define INTR_PORT 0x0a
+
+#define MBOX_BUSY_PORT 0x00
+#define MBOX_PORT0 0x04
+#define MBOX_PORT1 0x05
+#define MBOX_PORT2 0x06
+#define MBOX_PORT3 0x07
+#define ENABLE_MBOX_REGION 0x0B
/* I/O Port Values */
-#define ISSUE_BYTE 0x10
-#define ACK_BYTE 0x08
-#define ENABLE_INTR_BYTE 0xc0
-#define DISABLE_INTR_BYTE 0x00
-#define VALID_INTR_BYTE 0x40
-#define MBOX_BUSY_BYTE 0x10
-#define ENABLE_MBOX_BYTE 0x00
-
+#define ISSUE_BYTE 0x10
+#define ACK_BYTE 0x08
+#define ENABLE_INTR_BYTE 0xc0
+#define DISABLE_INTR_BYTE 0x00
+#define VALID_INTR_BYTE 0x40
+#define MBOX_BUSY_BYTE 0x10
+#define ENABLE_MBOX_BYTE 0x00
/* Setup some port macros here */
-#define issue_command(adapter) \
- outb_p(ISSUE_BYTE, (adapter)->base + CMD_PORT)
+#define issue_command(adapter) outb_p(ISSUE_BYTE, (adapter)->base + CMD_PORT)
-#define irq_state(adapter) inb_p((adapter)->base + INTR_PORT)
+#define irq_state(adapter) inb_p((adapter)->base + INTR_PORT)
-#define set_irq_state(adapter, value) \
- outb_p((value), (adapter)->base + INTR_PORT)
+#define set_irq_state(adapter, value) \
+ outb_p((value), (adapter)->base + INTR_PORT)
-#define irq_ack(adapter) \
- outb_p(ACK_BYTE, (adapter)->base + ACK_PORT)
+#define irq_ack(adapter) outb_p(ACK_BYTE, (adapter)->base + ACK_PORT)
-#define irq_enable(adapter) \
+#define irq_enable(adapter) \
outb_p(ENABLE_INTR_BYTE, (adapter)->base + TOGGLE_PORT)
-#define irq_disable(adapter) \
+#define irq_disable(adapter) \
outb_p(DISABLE_INTR_BYTE, (adapter)->base + TOGGLE_PORT)
-
/*
* This is our SYSDEP area. All kernel specific detail should be placed here -
* as much as possible
@@ -935,14 +911,14 @@ struct mega_hbas {
* End of SYSDEP area
*/
-const char *megaraid_info (struct Scsi_Host *);
+const char *megaraid_info(struct Scsi_Host *);
static int mega_query_adapter(adapter_t *);
static int issue_scb(adapter_t *, scb_t *);
static int mega_setup_mailbox(adapter_t *);
-static int megaraid_queue (struct Scsi_Host *, struct scsi_cmnd *);
-static scb_t * mega_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
+static int megaraid_queue(struct Scsi_Host *, struct scsi_cmnd *);
+static scb_t *mega_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
static void __mega_runpendq(adapter_t *);
static int issue_scb_block(adapter_t *, u_char *);
@@ -955,25 +931,25 @@ static int megaraid_abort(struct scsi_cmnd *);
static int megaraid_reset(struct scsi_cmnd *);
static int megaraid_abort_and_reset(adapter_t *, struct scsi_cmnd *, int);
static int megaraid_biosparam(struct scsi_device *, struct block_device *,
- sector_t, int []);
-
-static int mega_build_sglist (adapter_t *adapter, scb_t *scb,
- u32 *buffer, u32 *length);
-static int __mega_busywait_mbox (adapter_t *);
-static void mega_rundoneq (adapter_t *);
-static void mega_cmd_done(adapter_t *, u8 [], int, int);
-static inline void mega_free_sgl (adapter_t *adapter);
-static void mega_8_to_40ld (mraid_inquiry *inquiry,
- mega_inquiry3 *enquiry3, mega_product_info *);
-
-static int megadev_open (struct inode *, struct file *);
-static int megadev_ioctl (struct file *, unsigned int, unsigned long);
+ sector_t, int[]);
+
+static int mega_build_sglist(adapter_t *adapter, scb_t *scb, u32 *buffer,
+ u32 *length);
+static int __mega_busywait_mbox(adapter_t *);
+static void mega_rundoneq(adapter_t *);
+static void mega_cmd_done(adapter_t *, u8[], int, int);
+static inline void mega_free_sgl(adapter_t *adapter);
+static void mega_8_to_40ld(mraid_inquiry *inquiry, mega_inquiry3 *enquiry3,
+ mega_product_info *);
+
+static int megadev_open(struct inode *, struct file *);
+static int megadev_ioctl(struct file *, unsigned int, unsigned long);
static int mega_m_to_n(void __user *, nitioctl_t *);
static int mega_n_to_m(void __user *, megacmd_t *);
-static int mega_init_scb (adapter_t *);
+static int mega_init_scb(adapter_t *);
-static int mega_is_bios_enabled (adapter_t *);
+static int mega_is_bios_enabled(adapter_t *);
#ifdef CONFIG_PROC_FS
static void mega_create_proc_entry(int, struct proc_dir_entry *);
@@ -982,10 +958,10 @@ static int mega_internal_dev_inquiry(adapter_t *, u8, u8, dma_addr_t);
#endif
static int mega_support_ext_cdb(adapter_t *);
-static mega_passthru* mega_prepare_passthru(adapter_t *, scb_t *,
- struct scsi_cmnd *, int, int);
-static mega_ext_passthru* mega_prepare_extpassthru(adapter_t *,
- scb_t *, struct scsi_cmnd *, int, int);
+static mega_passthru *mega_prepare_passthru(adapter_t *, scb_t *,
+ struct scsi_cmnd *, int, int);
+static mega_ext_passthru *
+mega_prepare_extpassthru(adapter_t *, scb_t *, struct scsi_cmnd *, int, int);
static void mega_enum_raid_scsi(adapter_t *);
static void mega_get_boot_drv(adapter_t *);
static int mega_support_random_del(adapter_t *);
--
2.26.3
^ permalink raw reply related [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-27 15:19 [PATCH] scsi: megaraid: cleanup formatting of megaraid trix
@ 2022-01-27 22:37 ` Finn Thain
2022-01-27 22:47 ` Nick Desaulniers
2022-01-28 17:42 ` Bart Van Assche
1 sibling, 1 reply; 35+ messages in thread
From: Finn Thain @ 2022-01-27 22:37 UTC (permalink / raw)
To: Tom Rix
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, ndesaulniers, megaraidlinux.pdl,
linux-scsi, linux-kernel, llvm
On Thu, 27 Jan 2022, trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>
>
> checkpatch reports several hundred formatting errors. Run these files
> through clang-format and knock off some of them.
>
That method seems like a good recipe for endless churn unless checkpatch
and clang-format really agree about these style rules.
Why use checkpatch to assess code style, if we could simply diff the
existing source with the output from clang-format... but it seems that
clang-format harms readability, makes indentation errors and uses
inconsistent style rules. Some examples:
> static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
> module_param(max_sectors_per_io, ushort, 0);
> -MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
> -
> +MODULE_PARM_DESC(
> + max_sectors_per_io,
> + "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
>
> static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
> module_param(max_mbox_busy_wait, ushort, 0);
> -MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
> +MODULE_PARM_DESC(
> + max_mbox_busy_wait,
> + "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
>
This code is longer for no real improvement.
>
> /*
> * The File Operations structure for the serial/ioctl interface of the driver
> */
> static const struct file_operations megadev_fops = {
> - .owner = THIS_MODULE,
> - .unlocked_ioctl = megadev_unlocked_ioctl,
> - .open = megadev_open,
> - .llseek = noop_llseek,
> + .owner = THIS_MODULE,
> + .unlocked_ioctl = megadev_unlocked_ioctl,
> + .open = megadev_open,
> + .llseek = noop_llseek,
> };
>
> /*
Readability loss.
> - prod_info_dma_handle = dma_map_single(&adapter->dev->dev,
> - (void *)&adapter->product_info,
> - sizeof(mega_product_info),
> - DMA_FROM_DEVICE);
> + prod_info_dma_handle = dma_map_single(
> + &adapter->dev->dev, (void *)&adapter->product_info,
> + sizeof(mega_product_info), DMA_FROM_DEVICE);
>
Note the orphaned first parameter and odd indentation.
>
> static DEF_SCSI_QCMD(megaraid_queue)
>
> -/**
> + /**
> * mega_allocate_scb()
> * @adapter: pointer to our soft state
> * @cmd: scsi command from the mid-layer
Indentation error.
> @@ -418,15 +409,14 @@ static DEF_SCSI_QCMD(megaraid_queue)
> * Allocate a SCB structure. This is the central structure for controller
> * commands.
> */
> -static inline scb_t *
> -mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
> + static inline scb_t *mega_allocate_scb(adapter_t *adapter,
> + struct scsi_cmnd *cmd)
> {
> struct list_head *head = &adapter->free_list;
Same.
> @@ -586,26 +568,25 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
>
> ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
>
> -
> max_ldrv_num = (adapter->flag & BOARD_40LD) ?
> - MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
> + MAX_LOGICAL_DRIVES_40LD :
> + MAX_LOGICAL_DRIVES_8LD;
>
Churn, if not readability loss. Note the indentation change here is
inconsistent with the indentation change noted above.
> * 6-byte READ(0x08) or WRITE(0x0A) cdb
> */
> - if( cmd->cmd_len == 6 ) {
> - mbox->m_out.numsectors = (u32) cmd->cmnd[4];
> - mbox->m_out.lba =
> - ((u32)cmd->cmnd[1] << 16) |
> - ((u32)cmd->cmnd[2] << 8) |
> - (u32)cmd->cmnd[3];
> + if (cmd->cmd_len == 6) {
> + mbox->m_out.numsectors = (u32)cmd->cmnd[4];
> + mbox->m_out.lba = ((u32)cmd->cmnd[1] << 16) |
> + ((u32)cmd->cmnd[2] << 8) |
> + (u32)cmd->cmnd[3];
>
> mbox->m_out.lba &= 0x1FFFFF;
>
Here, the orphaned term is moved up, next to the =. And yet,
>
> /* Calculate Scatter-Gather info */
> - mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
> - (u32 *)&mbox->m_out.xferaddr, &seg);
> + mbox->m_out.numsgelements =
> + mega_build_sglist(adapter, scb,
> + (u32 *)&mbox->m_out.xferaddr,
> + &seg);
>
> return scb;
>
... here the first term is moved down and orphaned, which is another
inconsistency.
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-27 22:37 ` Finn Thain
@ 2022-01-27 22:47 ` Nick Desaulniers
2022-01-28 0:32 ` Tom Rix
2022-01-28 9:39 ` Miguel Ojeda
0 siblings, 2 replies; 35+ messages in thread
From: Nick Desaulniers @ 2022-01-27 22:47 UTC (permalink / raw)
To: Finn Thain, Miguel Ojeda
Cc: Tom Rix, kashyap.desai, sumit.saxena, shivasharan.srikanteshwara,
jejb, martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm, Joe Perches
+ Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
These criticisms are worth reviewing.
On Thu, Jan 27, 2022 at 2:38 PM Finn Thain <fthain@linux-m68k.org> wrote:
>
>
> On Thu, 27 Jan 2022, trix@redhat.com wrote:
>
> > From: Tom Rix <trix@redhat.com>
> >
> > checkpatch reports several hundred formatting errors. Run these files
> > through clang-format and knock off some of them.
> >
>
> That method seems like a good recipe for endless churn unless checkpatch
> and clang-format really agree about these style rules.
>
> Why use checkpatch to assess code style, if we could simply diff the
> existing source with the output from clang-format... but it seems that
> clang-format harms readability, makes indentation errors and uses
> inconsistent style rules. Some examples:
>
> > static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
> > module_param(max_sectors_per_io, ushort, 0);
> > -MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
> > -
> > +MODULE_PARM_DESC(
> > + max_sectors_per_io,
> > + "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
> >
> > static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
> > module_param(max_mbox_busy_wait, ushort, 0);
> > -MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
> > +MODULE_PARM_DESC(
> > + max_mbox_busy_wait,
> > + "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
> >
>
> This code is longer for no real improvement.
>
> >
> > /*
> > * The File Operations structure for the serial/ioctl interface of the driver
> > */
> > static const struct file_operations megadev_fops = {
> > - .owner = THIS_MODULE,
> > - .unlocked_ioctl = megadev_unlocked_ioctl,
> > - .open = megadev_open,
> > - .llseek = noop_llseek,
> > + .owner = THIS_MODULE,
> > + .unlocked_ioctl = megadev_unlocked_ioctl,
> > + .open = megadev_open,
> > + .llseek = noop_llseek,
> > };
> >
> > /*
>
> Readability loss.
>
> > - prod_info_dma_handle = dma_map_single(&adapter->dev->dev,
> > - (void *)&adapter->product_info,
> > - sizeof(mega_product_info),
> > - DMA_FROM_DEVICE);
> > + prod_info_dma_handle = dma_map_single(
> > + &adapter->dev->dev, (void *)&adapter->product_info,
> > + sizeof(mega_product_info), DMA_FROM_DEVICE);
> >
>
> Note the orphaned first parameter and odd indentation.
>
> >
> > static DEF_SCSI_QCMD(megaraid_queue)
> >
> > -/**
> > + /**
> > * mega_allocate_scb()
> > * @adapter: pointer to our soft state
> > * @cmd: scsi command from the mid-layer
>
> Indentation error.
>
> > @@ -418,15 +409,14 @@ static DEF_SCSI_QCMD(megaraid_queue)
> > * Allocate a SCB structure. This is the central structure for controller
> > * commands.
> > */
> > -static inline scb_t *
> > -mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
> > + static inline scb_t *mega_allocate_scb(adapter_t *adapter,
> > + struct scsi_cmnd *cmd)
> > {
> > struct list_head *head = &adapter->free_list;
>
> Same.
>
> > @@ -586,26 +568,25 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
> >
> > ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
> >
> > -
> > max_ldrv_num = (adapter->flag & BOARD_40LD) ?
> > - MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
> > + MAX_LOGICAL_DRIVES_40LD :
> > + MAX_LOGICAL_DRIVES_8LD;
> >
>
> Churn, if not readability loss. Note the indentation change here is
> inconsistent with the indentation change noted above.
>
> > * 6-byte READ(0x08) or WRITE(0x0A) cdb
> > */
> > - if( cmd->cmd_len == 6 ) {
> > - mbox->m_out.numsectors = (u32) cmd->cmnd[4];
> > - mbox->m_out.lba =
> > - ((u32)cmd->cmnd[1] << 16) |
> > - ((u32)cmd->cmnd[2] << 8) |
> > - (u32)cmd->cmnd[3];
> > + if (cmd->cmd_len == 6) {
> > + mbox->m_out.numsectors = (u32)cmd->cmnd[4];
> > + mbox->m_out.lba = ((u32)cmd->cmnd[1] << 16) |
> > + ((u32)cmd->cmnd[2] << 8) |
> > + (u32)cmd->cmnd[3];
> >
> > mbox->m_out.lba &= 0x1FFFFF;
> >
>
> Here, the orphaned term is moved up, next to the =. And yet,
>
> >
> > /* Calculate Scatter-Gather info */
> > - mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
> > - (u32 *)&mbox->m_out.xferaddr, &seg);
> > + mbox->m_out.numsgelements =
> > + mega_build_sglist(adapter, scb,
> > + (u32 *)&mbox->m_out.xferaddr,
> > + &seg);
> >
> > return scb;
> >
>
> ... here the first term is moved down and orphaned, which is another
> inconsistency.
--
Thanks,
~Nick Desaulniers
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-27 22:47 ` Nick Desaulniers
@ 2022-01-28 0:32 ` Tom Rix
2022-01-28 2:43 ` Joe Perches
2022-01-28 9:39 ` Miguel Ojeda
1 sibling, 1 reply; 35+ messages in thread
From: Tom Rix @ 2022-01-28 0:32 UTC (permalink / raw)
To: Nick Desaulniers, Finn Thain, Miguel Ojeda
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm, Joe Perches
On 1/27/22 2:47 PM, Nick Desaulniers wrote:
> + Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
> These criticisms are worth reviewing.
>
> On Thu, Jan 27, 2022 at 2:38 PM Finn Thain <fthain@linux-m68k.org> wrote:
>>
>> On Thu, 27 Jan 2022, trix@redhat.com wrote:
>>
>>> From: Tom Rix <trix@redhat.com>
>>>
>>> checkpatch reports several hundred formatting errors. Run these files
>>> through clang-format and knock off some of them.
>>>
>> That method seems like a good recipe for endless churn unless checkpatch
>> and clang-format really agree about these style rules.
>>
>> Why use checkpatch to assess code style, if we could simply diff the
>> existing source with the output from clang-format... but it seems that
>> clang-format harms readability, makes indentation errors and uses
>> inconsistent style rules. Some examples:
Problems with clang-format should be fixed, I'll take a look.
I was reviewing this file for another issue and could not get past how
horredously bad it was and really did not want to manually fix the 400+
formatting errors. I will drop this patch and use the use these files
to verify the .clang-format .
Tom
>>
>>> static unsigned short int max_sectors_per_io = MAX_SECTORS_PER_IO;
>>> module_param(max_sectors_per_io, ushort, 0);
>>> -MODULE_PARM_DESC(max_sectors_per_io, "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
>>> -
>>> +MODULE_PARM_DESC(
>>> + max_sectors_per_io,
>>> + "Maximum number of sectors per I/O request (default=MAX_SECTORS_PER_IO=128)");
>>>
>>> static unsigned short int max_mbox_busy_wait = MBOX_BUSY_WAIT;
>>> module_param(max_mbox_busy_wait, ushort, 0);
>>> -MODULE_PARM_DESC(max_mbox_busy_wait, "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
>>> +MODULE_PARM_DESC(
>>> + max_mbox_busy_wait,
>>> + "Maximum wait for mailbox in microseconds if busy (default=MBOX_BUSY_WAIT=10)");
>>>
>> This code is longer for no real improvement.
>>
>>> /*
>>> * The File Operations structure for the serial/ioctl interface of the driver
>>> */
>>> static const struct file_operations megadev_fops = {
>>> - .owner = THIS_MODULE,
>>> - .unlocked_ioctl = megadev_unlocked_ioctl,
>>> - .open = megadev_open,
>>> - .llseek = noop_llseek,
>>> + .owner = THIS_MODULE,
>>> + .unlocked_ioctl = megadev_unlocked_ioctl,
>>> + .open = megadev_open,
>>> + .llseek = noop_llseek,
>>> };
>>>
>>> /*
>> Readability loss.
>>
>>> - prod_info_dma_handle = dma_map_single(&adapter->dev->dev,
>>> - (void *)&adapter->product_info,
>>> - sizeof(mega_product_info),
>>> - DMA_FROM_DEVICE);
>>> + prod_info_dma_handle = dma_map_single(
>>> + &adapter->dev->dev, (void *)&adapter->product_info,
>>> + sizeof(mega_product_info), DMA_FROM_DEVICE);
>>>
>> Note the orphaned first parameter and odd indentation.
>>
>>> static DEF_SCSI_QCMD(megaraid_queue)
>>>
>>> -/**
>>> + /**
>>> * mega_allocate_scb()
>>> * @adapter: pointer to our soft state
>>> * @cmd: scsi command from the mid-layer
>> Indentation error.
>>
>>> @@ -418,15 +409,14 @@ static DEF_SCSI_QCMD(megaraid_queue)
>>> * Allocate a SCB structure. This is the central structure for controller
>>> * commands.
>>> */
>>> -static inline scb_t *
>>> -mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd *cmd)
>>> + static inline scb_t *mega_allocate_scb(adapter_t *adapter,
>>> + struct scsi_cmnd *cmd)
>>> {
>>> struct list_head *head = &adapter->free_list;
>> Same.
>>
>>> @@ -586,26 +568,25 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd *cmd, int *busy)
>>>
>>> ldrv_num = mega_get_ldrv_num(adapter, cmd, channel);
>>>
>>> -
>>> max_ldrv_num = (adapter->flag & BOARD_40LD) ?
>>> - MAX_LOGICAL_DRIVES_40LD : MAX_LOGICAL_DRIVES_8LD;
>>> + MAX_LOGICAL_DRIVES_40LD :
>>> + MAX_LOGICAL_DRIVES_8LD;
>>>
>> Churn, if not readability loss. Note the indentation change here is
>> inconsistent with the indentation change noted above.
>>
>>> * 6-byte READ(0x08) or WRITE(0x0A) cdb
>>> */
>>> - if( cmd->cmd_len == 6 ) {
>>> - mbox->m_out.numsectors = (u32) cmd->cmnd[4];
>>> - mbox->m_out.lba =
>>> - ((u32)cmd->cmnd[1] << 16) |
>>> - ((u32)cmd->cmnd[2] << 8) |
>>> - (u32)cmd->cmnd[3];
>>> + if (cmd->cmd_len == 6) {
>>> + mbox->m_out.numsectors = (u32)cmd->cmnd[4];
>>> + mbox->m_out.lba = ((u32)cmd->cmnd[1] << 16) |
>>> + ((u32)cmd->cmnd[2] << 8) |
>>> + (u32)cmd->cmnd[3];
>>>
>>> mbox->m_out.lba &= 0x1FFFFF;
>>>
>> Here, the orphaned term is moved up, next to the =. And yet,
>>
>>> /* Calculate Scatter-Gather info */
>>> - mbox->m_out.numsgelements = mega_build_sglist(adapter, scb,
>>> - (u32 *)&mbox->m_out.xferaddr, &seg);
>>> + mbox->m_out.numsgelements =
>>> + mega_build_sglist(adapter, scb,
>>> + (u32 *)&mbox->m_out.xferaddr,
>>> + &seg);
>>>
>>> return scb;
>>>
>> ... here the first term is moved down and orphaned, which is another
>> inconsistency.
>
>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 0:32 ` Tom Rix
@ 2022-01-28 2:43 ` Joe Perches
2022-01-28 5:31 ` Tom Rix
0 siblings, 1 reply; 35+ messages in thread
From: Joe Perches @ 2022-01-28 2:43 UTC (permalink / raw)
To: Tom Rix, Nick Desaulniers, Finn Thain, Miguel Ojeda
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
On Thu, 2022-01-27 at 16:32 -0800, Tom Rix wrote:
> On 1/27/22 2:47 PM, Nick Desaulniers wrote:
> > + Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
> > These criticisms are worth reviewing.
> >
> > On Thu, Jan 27, 2022 at 2:38 PM Finn Thain <fthain@linux-m68k.org> wrote:
> > >
> > > On Thu, 27 Jan 2022, trix@redhat.com wrote:
> > >
> > > > From: Tom Rix <trix@redhat.com>
> > > >
> > > > checkpatch reports several hundred formatting errors. Run these files
> > > > through clang-format and knock off some of them.
> > > >
> > > That method seems like a good recipe for endless churn unless checkpatch
> > > and clang-format really agree about these style rules.
> > >
> > > Why use checkpatch to assess code style, if we could simply diff the
> > > existing source with the output from clang-format... but it seems that
> > > clang-format harms readability, makes indentation errors and uses
> > > inconsistent style rules. Some examples:
>
> Problems with clang-format should be fixed, I'll take a look.
>
> I was reviewing this file for another issue and could not get past how
> horredously bad it was and really did not want to manually fix the 400+
> formatting errors. I will drop this patch and use the use these files
> to verify the .clang-format .
I think this is more an issue with clang-format than with checkpatch.
If you have specific issues with what checkpatch reports for this
file (or any other file), let me know.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 2:43 ` Joe Perches
@ 2022-01-28 5:31 ` Tom Rix
2022-01-28 8:41 ` Joe Perches
0 siblings, 1 reply; 35+ messages in thread
From: Tom Rix @ 2022-01-28 5:31 UTC (permalink / raw)
To: Joe Perches, Nick Desaulniers, Finn Thain, Miguel Ojeda
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
On 1/27/22 6:43 PM, Joe Perches wrote:
> On Thu, 2022-01-27 at 16:32 -0800, Tom Rix wrote:
>> On 1/27/22 2:47 PM, Nick Desaulniers wrote:
>>> + Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
>>> These criticisms are worth reviewing.
>>>
>>> On Thu, Jan 27, 2022 at 2:38 PM Finn Thain <fthain@linux-m68k.org> wrote:
>>>> On Thu, 27 Jan 2022, trix@redhat.com wrote:
>>>>
>>>>> From: Tom Rix <trix@redhat.com>
>>>>>
>>>>> checkpatch reports several hundred formatting errors. Run these files
>>>>> through clang-format and knock off some of them.
>>>>>
>>>> That method seems like a good recipe for endless churn unless checkpatch
>>>> and clang-format really agree about these style rules.
>>>>
>>>> Why use checkpatch to assess code style, if we could simply diff the
>>>> existing source with the output from clang-format... but it seems that
>>>> clang-format harms readability, makes indentation errors and uses
>>>> inconsistent style rules. Some examples:
>> Problems with clang-format should be fixed, I'll take a look.
>>
>> I was reviewing this file for another issue and could not get past how
>> horredously bad it was and really did not want to manually fix the 400+
>> formatting errors. I will drop this patch and use the use these files
>> to verify the .clang-format .
> I think this is more an issue with clang-format than with checkpatch.
>
> If you have specific issues with what checkpatch reports for this
> file (or any other file), let me know.
Yes, I agree. Its a clang-format problem.
I will be looking to minimize the .clang-format settings to only those
that agree with checkpatch.
Then add settings back in later if their problems can be worked out.
Tom
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 5:31 ` Tom Rix
@ 2022-01-28 8:41 ` Joe Perches
2022-01-28 15:30 ` Tom Rix
0 siblings, 1 reply; 35+ messages in thread
From: Joe Perches @ 2022-01-28 8:41 UTC (permalink / raw)
To: Tom Rix, Nick Desaulniers, Finn Thain, Miguel Ojeda
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
On Thu, 2022-01-27 at 21:31 -0800, Tom Rix wrote:
> On 1/27/22 6:43 PM, Joe Perches wrote:
> > On Thu, 2022-01-27 at 16:32 -0800, Tom Rix wrote:
> > > On 1/27/22 2:47 PM, Nick Desaulniers wrote:
> > > > + Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
> > > > These criticisms are worth reviewing.
> > > >
> > > > On Thu, Jan 27, 2022 at 2:38 PM Finn Thain <fthain@linux-m68k.org> wrote:
> > > > > On Thu, 27 Jan 2022, trix@redhat.com wrote:
> > > > >
> > > > > > From: Tom Rix <trix@redhat.com>
> > > > > >
> > > > > > checkpatch reports several hundred formatting errors. Run these files
> > > > > > through clang-format and knock off some of them.
> > > > > >
> > > > > That method seems like a good recipe for endless churn unless checkpatch
> > > > > and clang-format really agree about these style rules.
> > > > >
> > > > > Why use checkpatch to assess code style, if we could simply diff the
> > > > > existing source with the output from clang-format... but it seems that
> > > > > clang-format harms readability, makes indentation errors and uses
> > > > > inconsistent style rules. Some examples:
> > > Problems with clang-format should be fixed, I'll take a look.
> > >
> > > I was reviewing this file for another isseue and could not get past how
> > > horredously bad it was and really did not want to manually fix the 400+
> > > formatting errors. I will drop this patch and use the use these files
> > > to verify the .clang-format .
> > I think this is more an issue with clang-format than with checkpatch.
> >
> > If you have specific issues with what checkpatch reports for this
> > file (or any other file), let me know.
>
> Yes, I agree. Its a clang-format problem.
>
> I will be looking to minimize the .clang-format settings to only those
> that agree with checkpatch.
>
> Then add settings back in later if their problems can be worked out.
Another option would be to use:
./scripts/checkpatch.pl -f --fix[-inplace] [--types=<list>] <files>
where types is an optional list of specific things to change
see:
./scripts/checkpatch.pl --list-types --verbose
to show the possible types.
Only some of these types can be changed with --fix or --fix-inplace
If using checkpatch to change formatting, it sometimes can be useful
to run checkpatch --fix multiple times on the same file as a
checkpatch --fix can create a change than checkpatch will suggest
should itself be fixed.
Of course another option is to do nothing as many will complain,
sometimes senselessly, about 'churn'.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 8:41 ` Joe Perches
@ 2022-01-28 15:30 ` Tom Rix
2022-01-28 16:23 ` Joe Perches
2022-01-28 23:45 ` Finn Thain
0 siblings, 2 replies; 35+ messages in thread
From: Tom Rix @ 2022-01-28 15:30 UTC (permalink / raw)
To: Joe Perches, Nick Desaulniers, Finn Thain, Miguel Ojeda
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
On 1/28/22 12:41 AM, Joe Perches wrote:
> On Thu, 2022-01-27 at 21:31 -0800, Tom Rix wrote:
>> On 1/27/22 6:43 PM, Joe Perches wrote:
>>> On Thu, 2022-01-27 at 16:32 -0800, Tom Rix wrote:
>>>> On 1/27/22 2:47 PM, Nick Desaulniers wrote:
>>>>> + Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
>>>>> These criticisms are worth reviewing.
>>>>>
>>>>> On Thu, Jan 27, 2022 at 2:38 PM Finn Thain <fthain@linux-m68k.org> wrote:
>>>>>> On Thu, 27 Jan 2022, trix@redhat.com wrote:
>>>>>>
>>>>>>> From: Tom Rix <trix@redhat.com>
>>>>>>>
>>>>>>> checkpatch reports several hundred formatting errors. Run these files
>>>>>>> through clang-format and knock off some of them.
>>>>>>>
>>>>>> That method seems like a good recipe for endless churn unless checkpatch
>>>>>> and clang-format really agree about these style rules.
>>>>>>
>>>>>> Why use checkpatch to assess code style, if we could simply diff the
>>>>>> existing source with the output from clang-format... but it seems that
>>>>>> clang-format harms readability, makes indentation errors and uses
>>>>>> inconsistent style rules. Some examples:
>>>> Problems with clang-format should be fixed, I'll take a look.
>>>>
>>>> I was reviewing this file for another isseue and could not get past how
>>>> horredously bad it was and really did not want to manually fix the 400+
>>>> formatting errors. I will drop this patch and use the use these files
>>>> to verify the .clang-format .
>>> I think this is more an issue with clang-format than with checkpatch.
>>>
>>> If you have specific issues with what checkpatch reports for this
>>> file (or any other file), let me know.
>> Yes, I agree. Its a clang-format problem.
>>
>> I will be looking to minimize the .clang-format settings to only those
>> that agree with checkpatch.
>>
>> Then add settings back in later if their problems can be worked out.
> Another option would be to use:
>
> ./scripts/checkpatch.pl -f --fix[-inplace] [--types=<list>] <files>
>
> where types is an optional list of specific things to change
>
> see:
> ./scripts/checkpatch.pl --list-types --verbose
>
> to show the possible types.
>
> Only some of these types can be changed with --fix or --fix-inplace
>
> If using checkpatch to change formatting, it sometimes can be useful
> to run checkpatch --fix multiple times on the same file as a
> checkpatch --fix can create a change than checkpatch will suggest
> should itself be fixed.
>
> Of course another option is to do nothing as many will complain,
> sometimes senselessly, about 'churn'.
A testsuite for the fixers may help with churn
Any interest or thought on organization ?
I can take stab at one.
Tom
>
>
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 15:30 ` Tom Rix
@ 2022-01-28 16:23 ` Joe Perches
2022-01-28 23:45 ` Finn Thain
1 sibling, 0 replies; 35+ messages in thread
From: Joe Perches @ 2022-01-28 16:23 UTC (permalink / raw)
To: Tom Rix, Nick Desaulniers, Finn Thain, Miguel Ojeda,
Dwaipayan Ray, Lukas Bulwahn
Cc: kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, nathan, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
(adding checkpatch reviewers Dwaipayan and Lukas)
Original thread: https://lore.kernel.org/lkml/20220127151945.1244439-1-trix@redhat.com/
On Fri, 2022-01-28 at 07:30 -0800, Tom Rix wrote:
> On 1/28/22 12:41 AM, Joe Perches wrote:
> > Another option would be to use:
> >
> > ./scripts/checkpatch.pl -f --fix[-inplace] [--types=<list>] <files>
> >
> > where types is an optional list of specific things to change
> >
> > see:
> > ./scripts/checkpatch.pl --list-types --verbose
> >
> > to show the possible types.
> >
> > Only some of these types can be changed with --fix or --fix-inplace
> >
> > If using checkpatch to change formatting, it sometimes can be useful
> > to run checkpatch --fix multiple times on the same file as a
> > checkpatch --fix can create a change than checkpatch will suggest
> > should itself be fixed.
> >
> > Of course another option is to do nothing as many will complain,
> > sometimes senselessly, about 'churn'.
>
> A testsuite for the fixers may help with churn
Likely not, as IMO churn is an 'eye of beholder' issue.
> Any interest or thought on organization ?
Not really.
The checkpatch --fix code isn't perfect as it's just regexes.
When writing the --fix code, I've always just used the kernel
sources and git history to inspect/verify suggested changes.
> I can take stab at one.
Enjoy.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 15:30 ` Tom Rix
2022-01-28 16:23 ` Joe Perches
@ 2022-01-28 23:45 ` Finn Thain
1 sibling, 0 replies; 35+ messages in thread
From: Finn Thain @ 2022-01-28 23:45 UTC (permalink / raw)
To: Tom Rix
Cc: Joe Perches, Nick Desaulniers, Miguel Ojeda, kashyap.desai,
sumit.saxena, shivasharan.srikanteshwara, jejb, martin.petersen,
nathan, megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On Fri, 28 Jan 2022, Tom Rix wrote:
> A testsuite for the fixers may help with churn
>
> Any interest or thought on organization ?
>
Here's one way:
1. Identify some source files that are exemplary (i.e. good style).
2. Run a new script to introduce style mistakes into those files.
3. Run the Reformatter Under Test on those files.
4. Compare the output with the original files.
But that's not sufficient to prevent more style patches (churn). We still
need a way to avoid wasting everyone's time writing, submitting, reviewing
and merging the inevitably incomplete style patches that may contain
regressions and cause conflicts.
The tooling I would like to see is not a script to introduce style
mistakes but an editor for binaries, such that C is not the "source" at
all but only an ephemeral representation to make it easier for humans to
effect changes to binaries (and debug info, commentary etc.)
Nonetheless, perfecting the clang-format tool is a good step towards a
better workflow, which I described once before.
https://lore.kernel.org/r/alpine.LNX.2.23.453.2010281344120.31@nippy.intranet/
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-27 22:47 ` Nick Desaulniers
2022-01-28 0:32 ` Tom Rix
@ 2022-01-28 9:39 ` Miguel Ojeda
1 sibling, 0 replies; 35+ messages in thread
From: Miguel Ojeda @ 2022-01-28 9:39 UTC (permalink / raw)
To: Nick Desaulniers
Cc: Finn Thain, Miguel Ojeda, Tom Rix, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen,
Nathan Chancellor, megaraidlinux.pdl, scsi, linux-kernel, llvm,
Joe Perches
On Thu, Jan 27, 2022 at 11:47 PM Nick Desaulniers
<ndesaulniers@google.com> wrote:
>
> + Miguel (the clang-format maintainer), Joe (checkpatch maintainer)
> These criticisms are worth reviewing.
Indeed, thanks Nick. In my upgrade to clang-format 11 (from the
current clang-format 4), I will check whether some of these improve.
Cheers,
Miguel
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-27 15:19 [PATCH] scsi: megaraid: cleanup formatting of megaraid trix
2022-01-27 22:37 ` Finn Thain
@ 2022-01-28 17:42 ` Bart Van Assche
2022-01-28 17:59 ` Tom Rix
1 sibling, 1 reply; 35+ messages in thread
From: Bart Van Assche @ 2022-01-28 17:42 UTC (permalink / raw)
To: trix, kashyap.desai, sumit.saxena, shivasharan.srikanteshwara,
jejb, martin.petersen, nathan, ndesaulniers
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On 1/27/22 07:19, trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>
>
> checkpatch reports several hundred formatting errors.
> Run these files through clang-format and knock off
> some of them.
Isn't this the kind of patches that carries more risk than value?
Additionally, this patch conflicts with a patch series that I plan to
post soon.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 17:42 ` Bart Van Assche
@ 2022-01-28 17:59 ` Tom Rix
2022-01-28 19:11 ` Joe Perches
0 siblings, 1 reply; 35+ messages in thread
From: Tom Rix @ 2022-01-28 17:59 UTC (permalink / raw)
To: Bart Van Assche, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen, nathan,
ndesaulniers
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On 1/28/22 9:42 AM, Bart Van Assche wrote:
> On 1/27/22 07:19, trix@redhat.com wrote:
>> From: Tom Rix <trix@redhat.com>
>>
>> checkpatch reports several hundred formatting errors.
>> Run these files through clang-format and knock off
>> some of them.
>
> Isn't this the kind of patches that carries more risk than value?
> Additionally, this patch conflicts with a patch series that I plan to
> post soon.
>
> Thanks,
I have dropped this patch.
Long term, it would be good have a reliable way to automatically fix
either new files or really broken old files.
So you could do two patches, first would be fixing formatting problems
and second would new stuff.
As it is your new patch will have to both for now.
Tom
>
>
> Bart.
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 17:59 ` Tom Rix
@ 2022-01-28 19:11 ` Joe Perches
2022-01-28 19:37 ` Tom Rix
2022-01-28 20:30 ` Bart Van Assche
0 siblings, 2 replies; 35+ messages in thread
From: Joe Perches @ 2022-01-28 19:11 UTC (permalink / raw)
To: Tom Rix, Bart Van Assche, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen, nathan,
ndesaulniers
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On Fri, 2022-01-28 at 09:59 -0800, Tom Rix wrote:
> On 1/28/22 9:42 AM, Bart Van Assche wrote:
> > On 1/27/22 07:19, trix@redhat.com wrote:
> > > From: Tom Rix <trix@redhat.com>
> > >
> > > checkpatch reports several hundred formatting errors.
> > > Run these files through clang-format and knock off
> > > some of them.
> >
> > Isn't this the kind of patches that carries more risk than value?
Risk for whitespace style reformatting patches is quite low.
Nominally, clang-format changes should not produce a different
compiled object file unless __LINE__/__DATE__/__TIME__ style
changes occur.
If it does, the clang-format tool is broken.
> > Additionally, this patch conflicts with a patch series that I plan to
> > post soon.
[]
> Long term, it would be good have a reliable way to automatically fix
> either new files or really broken old files.
That's really a maintainer preference no?
Especially so for any automation.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 19:11 ` Joe Perches
@ 2022-01-28 19:37 ` Tom Rix
2022-03-02 19:14 ` Tom Rix
2022-01-28 20:30 ` Bart Van Assche
1 sibling, 1 reply; 35+ messages in thread
From: Tom Rix @ 2022-01-28 19:37 UTC (permalink / raw)
To: Joe Perches, Bart Van Assche, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen, nathan,
ndesaulniers
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On 1/28/22 11:11 AM, Joe Perches wrote:
> On Fri, 2022-01-28 at 09:59 -0800, Tom Rix wrote:
>> On 1/28/22 9:42 AM, Bart Van Assche wrote:
>>> On 1/27/22 07:19, trix@redhat.com wrote:
>>>> From: Tom Rix <trix@redhat.com>
>>>>
>>>> checkpatch reports several hundred formatting errors.
>>>> Run these files through clang-format and knock off
>>>> some of them.
>>> Isn't this the kind of patches that carries more risk than value?
> Risk for whitespace style reformatting patches is quite low.
>
> Nominally, clang-format changes should not produce a different
> compiled object file unless __LINE__/__DATE__/__TIME__ style
> changes occur.
>
> If it does, the clang-format tool is broken.
>
>>> Additionally, this patch conflicts with a patch series that I plan to
>>> post soon.
> []
>> Long term, it would be good have a reliable way to automatically fix
>> either new files or really broken old files.
> That's really a maintainer preference no?
>
> Especially so for any automation.
In practice everything is up to the maintainer.
If some maintainer wants fix their formatting then clang-format should
just work
It isn't likely they will have time to hand fix every file.
Tom
>
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 19:37 ` Tom Rix
@ 2022-03-02 19:14 ` Tom Rix
2022-03-03 8:35 ` Finn Thain
0 siblings, 1 reply; 35+ messages in thread
From: Tom Rix @ 2022-03-02 19:14 UTC (permalink / raw)
To: Joe Perches, Bart Van Assche, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen, nathan,
ndesaulniers, Konrad Kleine
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On 1/28/22 11:37 AM, Tom Rix wrote:
>
> On 1/28/22 11:11 AM, Joe Perches wrote:
>> On Fri, 2022-01-28 at 09:59 -0800, Tom Rix wrote:
>>> On 1/28/22 9:42 AM, Bart Van Assche wrote:
>>>> On 1/27/22 07:19, trix@redhat.com wrote:
>>>>> From: Tom Rix <trix@redhat.com>
>>>>>
>>>>> checkpatch reports several hundred formatting errors.
>>>>> Run these files through clang-format and knock off
>>>>> some of them.
>>>> Isn't this the kind of patches that carries more risk than value?
>> Risk for whitespace style reformatting patches is quite low.
>>
>> Nominally, clang-format changes should not produce a different
>> compiled object file unless __LINE__/__DATE__/__TIME__ style
>> changes occur.
>>
>> If it does, the clang-format tool is broken.
>>
>>>> Additionally, this patch conflicts with a patch series that I plan to
>>>> post soon.
>> []
>>> Long term, it would be good have a reliable way to automatically fix
>>> either new files or really broken old files.
>> That's really a maintainer preference no?
>>
>> Especially so for any automation.
>
> In practice everything is up to the maintainer.
>
> If some maintainer wants fix their formatting then clang-format should
> just work
>
> It isn't likely they will have time to hand fix every file.
A follow up issue in the clang project has been raised by Konrad, here
https://github.com/llvm/llvm-project/issues/54137
Tom
>
> Tom
>
>>
>>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-02 19:14 ` Tom Rix
@ 2022-03-03 8:35 ` Finn Thain
2022-03-03 11:41 ` Konrad Wilhelm Kleine
[not found] ` <CABRYuGk+1AGpvfkR7=LTCm+bN4kt55fwQnQXCjidSXWxuMWsiQ@mail.gmail.com>
0 siblings, 2 replies; 35+ messages in thread
From: Finn Thain @ 2022-03-03 8:35 UTC (permalink / raw)
To: Tom Rix
Cc: Joe Perches, Bart Van Assche, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen, nathan,
ndesaulniers, Konrad Kleine, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
On Wed, 2 Mar 2022, Tom Rix wrote:
> >>> Long term, it would be good have a reliable way to automatically fix
> >>> either new files or really broken old files.
> >> That's really a maintainer preference no?
> >>
> >> Especially so for any automation.
> >
> > In practice everything is up to the maintainer.
> >
> > If some maintainer wants fix their formatting then clang-format should
> > just work
> >
> > It isn't likely they will have time to hand fix every file.
>
> A follow up issue in the clang project has been raised by Konrad, here
>
> https://github.com/llvm/llvm-project/issues/54137
>
Why request a "leave" option for every style rule? Why not just a "leave"
option for the most contentious rules?
The response from the developers that anyone who wants to leave existing
code unmolested by certain rules should "wake up and smell the coffee" is
obnoxious, IMO.
Presumably clang-format must grow until it has sufficient program logic
and config options to cater to every exception to every rule. How long
will that take? Some carefully chosen "leave" options might make the
program much more useful in the near term.
> Tom
>
>
> >
> > Tom
> >
> >>
> >>
>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 8:35 ` Finn Thain
@ 2022-03-03 11:41 ` Konrad Wilhelm Kleine
[not found] ` <CABRYuGk+1AGpvfkR7=LTCm+bN4kt55fwQnQXCjidSXWxuMWsiQ@mail.gmail.com>
1 sibling, 0 replies; 35+ messages in thread
From: Konrad Wilhelm Kleine @ 2022-03-03 11:41 UTC (permalink / raw)
To: Finn Thain
Cc: Tom Rix, Joe Perches, Bart Van Assche, kashyap.desai,
sumit.saxena, shivasharan.srikanteshwara, jejb, martin.petersen,
nathan, ndesaulniers, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
(Resending in plain text format to make mailing lists happy.)
Hi Finn,
On Thu, 3 Mar 2022 at 09:40, Finn Thain <fthain@linux-m68k.org> wrote:
>
>
> On Wed, 2 Mar 2022, Tom Rix wrote:
>
> > >>> Long term, it would be good have a reliable way to automatically fix
> > >>> either new files or really broken old files.
> > >> That's really a maintainer preference no?
> > >>
> > >> Especially so for any automation.
> > >
> > > In practice everything is up to the maintainer.
> > >
> > > If some maintainer wants fix their formatting then clang-format should
> > > just work
> > >
> > > It isn't likely they will have time to hand fix every file.
> >
> > A follow up issue in the clang project has been raised by Konrad, here
> >
> > https://github.com/llvm/llvm-project/issues/54137
> >
>
> Why request a "leave" option for every style rule? Why not just a "leave"
> option for the most contentious rules?
Getting to the point that every style option can be disabled
individually is not an operation done in one go. I plan on presenting
the changes required to exactly one style option and from there I'm
all ears if you have style options that you consider "contentious". We
could certainly tackle them next. But for starters I think it's fine
to just show the impact of changing one style option only.
>> The response from the developers that anyone who wants to leave existing
>> code unmolested by certain rules should "wake up and smell the coffee" is
>> obnoxious, IMO.
I hear you, I like tea better than coffee ;). In all seriousness, I'm
here to help and I don't judge the developers for protecting their
code and having an opinion about other projects. We're here to talk
and find a solution, nothing more. Let's try to ignore the sarcastic
undertone in the dialogue.
>> Presumably clang-format must grow until it has sufficient program logic
>> and config options to cater to every exception to every rule. How long
>> will that take? Some carefully chosen "leave" options might make the
>> program much more useful in the near term.
That's what I aim at. I hope I've outlined this in the first paragraph
of this email. One baby step at a time...
- Konrad
>
>
>
> > Tom
> >
> >
> > >
> > > Tom
> > >
> > >>
> > >>
> >
>
^ permalink raw reply [flat|nested] 35+ messages in thread[parent not found: <CABRYuGk+1AGpvfkR7=LTCm+bN4kt55fwQnQXCjidSXWxuMWsiQ@mail.gmail.com>]
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
[not found] ` <CABRYuGk+1AGpvfkR7=LTCm+bN4kt55fwQnQXCjidSXWxuMWsiQ@mail.gmail.com>
@ 2022-03-03 22:44 ` Finn Thain
2022-03-03 23:17 ` Miguel Ojeda
0 siblings, 1 reply; 35+ messages in thread
From: Finn Thain @ 2022-03-03 22:44 UTC (permalink / raw)
To: Konrad Wilhelm Kleine
Cc: Tom Rix, Joe Perches, Bart Van Assche, kashyap.desai,
sumit.saxena, shivasharan.srikanteshwara, jejb, martin.petersen,
nathan, ndesaulniers, megaraidlinux.pdl, linux-scsi,
linux-kernel, llvm
Hi Konrad,
On Thu, 3 Mar 2022, Konrad Wilhelm Kleine wrote:
> On Thu, 3 Mar 2022 at 09:40, Finn Thain <fthain@linux-m68k.org> wrote:
>
> > On Wed, 2 Mar 2022, Tom Rix wrote:
> >
> > > >>> Long term, it would be good have a reliable way to automatically
> > > >>> fix either new files or really broken old files.
> > > >> That's really a maintainer preference no?
> > > >>
> > > >> Especially so for any automation.
> > > >
> > > > In practice everything is up to the maintainer.
> > > >
> > > > If some maintainer wants fix their formatting then clang-format
> > > > should just work
> > > >
> > > > It isn't likely they will have time to hand fix every file.
> > >
> > > A follow up issue in the clang project has been raised by Konrad,
> > > here
> > >
> > > https://github.com/llvm/llvm-project/issues/54137
> > >
> >
> > Why request a "leave" option for every style rule? Why not just a
> > "leave" option for the most contentious rules?
> >
>
> Getting to the point that every style option can be disabled
> individually is not an operation done in one go. I plan on presenting
> the changes required to exactly one style option and from there I'm all
> ears if you have style options that you consider "contentious".
Sure, I'll provide an example of that below in case you're interested in
what I happen to find contentious. But this isn't about my taste.
The issue is really about removing an obstacle to wider adoption of
clang-formt. Therefore, shouldn't you be asking, what style rules have
already proven to be contentious within the project?
You can look to kernel subsystem style rules for examples of that. E.g.
some might argue that comments should always be left unmolested (where
they exist for the benefit of human readers and not tooling).
Others might argue that they should always be changed from,
/*
* this style
* of multiline comment
*/
to
/* this style
* of multiline comment
*/
For another example, the mailing lists recently saw another style rule
difference between subsystems:
https://lore.kernel.org/all/20220301055231.GI2812@kadam/
Joe said, in effect, "leave" whereas others seem to have different views.
Finally, here's an example that I personally found contentious.
drivers/scsi/NCR5380.c line 2306:
dsprintk(NDEBUG_ABORT, instance,
"abort: removed %p from sense queue\n", cmd);
Note the spaces (for alignment) following the tabs (for scope). I mention
this example not because I expect the world to "wake up and smell the
coffee" one day and embrace spaces-after-tabs.
I mention it because I expect the tabs/spaces/both issue to remain
contentious indefinitely (within any sufficiently large project).
I can think of another good example (line wrap) but I'll stop here.
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 22:44 ` Finn Thain
@ 2022-03-03 23:17 ` Miguel Ojeda
2022-03-03 23:38 ` Joe Perches
0 siblings, 1 reply; 35+ messages in thread
From: Miguel Ojeda @ 2022-03-03 23:17 UTC (permalink / raw)
To: Finn Thain
Cc: Konrad Wilhelm Kleine, Tom Rix, Joe Perches, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Thu, Mar 3, 2022 at 11:44 PM Finn Thain <fthain@linux-m68k.org> wrote:
>
> Others might argue that they should always be changed from,
>
> /*
> * this style
> * of multiline comment
> */
>
> to
>
> /* this style
> * of multiline comment
> */
In general, for things that the coding style guide talks about, we
should follow them, even if some subsystems do not (they can always
override in their folder if they really, really want it). So, here for
instance, the first one should be used.
Cheers,
Miguel
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 23:17 ` Miguel Ojeda
@ 2022-03-03 23:38 ` Joe Perches
2022-03-04 5:22 ` Bart Van Assche
` (3 more replies)
0 siblings, 4 replies; 35+ messages in thread
From: Joe Perches @ 2022-03-03 23:38 UTC (permalink / raw)
To: Miguel Ojeda, Finn Thain
Cc: Konrad Wilhelm Kleine, Tom Rix, Bart Van Assche, kashyap.desai,
sumit.saxena, shivasharan.srikanteshwara, jejb, martin.petersen,
Nathan Chancellor, Nick Desaulniers, megaraidlinux.pdl, scsi,
linux-kernel, llvm
On Fri, 2022-03-04 at 00:17 +0100, Miguel Ojeda wrote:
> On Thu, Mar 3, 2022 at 11:44 PM Finn Thain <fthain@linux-m68k.org> wrote:
> >
> > Others might argue that they should always be changed from,
> >
> > /*
> > * this style
> > * of multiline comment
> > */
> >
> > to
> >
> > /* this style
> > * of multiline comment
> > */
>
> In general, for things that the coding style guide talks about, we
> should follow them, even if some subsystems do not (they can always
> override in their folder if they really, really want it). So, here for
> instance, the first one should be used.
It's up to individual maintainers to each decide on what might be
considered unnecessary churn for the subsystems they control.
One argument is that churn leads to difficulty in backporting
fixes to older 'stable' versions.
I think the churn argument is overstated.
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 23:38 ` Joe Perches
@ 2022-03-04 5:22 ` Bart Van Assche
2022-03-04 5:40 ` Joe Perches
2022-03-05 3:22 ` Finn Thain
2022-03-04 7:47 ` Finn Thain
` (2 subsequent siblings)
3 siblings, 2 replies; 35+ messages in thread
From: Bart Van Assche @ 2022-03-04 5:22 UTC (permalink / raw)
To: Joe Perches, Miguel Ojeda, Finn Thain
Cc: Konrad Wilhelm Kleine, Tom Rix, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen,
Nathan Chancellor, Nick Desaulniers, megaraidlinux.pdl, scsi,
linux-kernel, llvm
On 3/3/22 15:38, Joe Perches wrote:
> One argument is that churn leads to difficulty in backporting
> fixes to older 'stable' versions.
>
> I think the churn argument is overstated.
I'm often backporting patches to older kernels and I think the churn argument
has not been emphasized enough. Backporting patches is a normal aspect of a
product lifecycle since a kernel version is chosen when development of a
product starts and bugfixes are cherry-picked from upstream selectively.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 5:22 ` Bart Van Assche
@ 2022-03-04 5:40 ` Joe Perches
2022-03-05 3:22 ` Finn Thain
1 sibling, 0 replies; 35+ messages in thread
From: Joe Perches @ 2022-03-04 5:40 UTC (permalink / raw)
To: Bart Van Assche, Miguel Ojeda, Finn Thain
Cc: Konrad Wilhelm Kleine, Tom Rix, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen,
Nathan Chancellor, Nick Desaulniers, megaraidlinux.pdl, scsi,
linux-kernel, llvm
On Thu, 2022-03-03 at 21:22 -0800, Bart Van Assche wrote:
> On 3/3/22 15:38, Joe Perches wrote:
> > One argument is that churn leads to difficulty in backporting
> > fixes to older 'stable' versions.
> >
> > I think the churn argument is overstated.
>
> I'm often backporting patches to older kernels and I think the churn argument
> has not been emphasized enough. Backporting patches is a normal aspect of a
> product lifecycle since a kernel version is chosen when development of a
> product starts and bugfixes are cherry-picked from upstream selectively.
Stable backporting is almost certainly what people get _paid_ to do.
IMO the most important tree is the current one not backports to stable.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 5:22 ` Bart Van Assche
2022-03-04 5:40 ` Joe Perches
@ 2022-03-05 3:22 ` Finn Thain
1 sibling, 0 replies; 35+ messages in thread
From: Finn Thain @ 2022-03-05 3:22 UTC (permalink / raw)
To: Bart Van Assche
Cc: Joe Perches, Miguel Ojeda, Konrad Wilhelm Kleine, Tom Rix,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
Hi Bart,
On Thu, 3 Mar 2022, Bart Van Assche wrote:
> On 3/3/22 15:38, Joe Perches wrote:
> > One argument is that churn leads to difficulty in backporting fixes to
> > older 'stable' versions.
> >
> > I think the churn argument is overstated.
>
> I'm often backporting patches to older kernels and I think the churn
> argument has not been emphasized enough. Backporting patches is a normal
> aspect of a product lifecycle since a kernel version is chosen when
> development of a product starts and bugfixes are cherry-picked from
> upstream selectively.
>
That should not be an issue. One of the benefits of having a canonical
form for source code is that you also get a canonical form for patches.
Let's say you receive a patch (or wish to cherry-pick one) that could be
applied to your backport branch, except for superficial changes that cause
a (canonical) patch to be rejected.
In principle, you can still apply the patch automatically. You "only"
require a canonical reformatter that preserves line numbering, and a tree
close to the tree on which the patch was based.
The process goes like this:
1. Checkout base tree
2. Reformat all the files mentioned in the bad patch, but confined to
those lines that appear in the patch.
3. Apply the patch and commit
Finally you'd cherry-pick that commit for your backport branch.
In case you receive a patch that's whitespace-damaged, you can do this
first:
1. Checkout base tree
2. Damage all the files mentioned in the bad patch
$ perl -i -p -e 's/\s+/ /g' ...
3. Do the same to the bad patch
4. Apply the bad patch
5. Reformat the files changed by the patch into canonical form
6. Tag that as "B"
7. Checkout base tree
8. Reformat the same files into canonical form
9. Tag that as "A"
10. Produce a good patch
$ git diff A..B
You can now apply the good patch to your branch. Since it is in canonical
form, it may still fail to apply (but see above for the solution).
This second example is not really a job for reviewers/maintainers but it
could be performed automatically by tooling like patchwork.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 23:38 ` Joe Perches
2022-03-04 5:22 ` Bart Van Assche
@ 2022-03-04 7:47 ` Finn Thain
2022-03-04 12:31 ` Miguel Ojeda
2022-03-04 13:46 ` Tom Rix
3 siblings, 0 replies; 35+ messages in thread
From: Finn Thain @ 2022-03-04 7:47 UTC (permalink / raw)
To: Joe Perches, Miguel Ojeda
Cc: Konrad Wilhelm Kleine, Tom Rix, Bart Van Assche, kashyap.desai,
sumit.saxena, shivasharan.srikanteshwara, jejb, martin.petersen,
Nathan Chancellor, Nick Desaulniers, megaraidlinux.pdl, scsi,
linux-kernel, llvm
On Thu, 3 Mar 2022, Joe Perches wrote:
> On Fri, 2022-03-04 at 00:17 +0100, Miguel Ojeda wrote:
> > On Thu, Mar 3, 2022 at 11:44 PM Finn Thain wrote:
> > >
> > > Others might argue that they should always be changed from,
> > >
> > > /*
> > > * this style
> > > * of multiline comment
> > > */
> > >
> > > to
> > >
> > > /* this style
> > > * of multiline comment
> > > */
> >
> > In general, for things that the coding style guide talks about, we
> > should follow them, even if some subsystems do not (they can always
> > override in their folder if they really, really want it). So, here for
> > instance, the first one should be used.
>
> It's up to individual maintainers to each decide on what might be
> considered unnecessary churn for the subsystems they control.
>
> One argument is that churn leads to difficulty in backporting fixes to
> older 'stable' versions.
>
> I think the churn argument is overstated.
>
If you would have clang-format override the committer and retrospectively
apply subsystem style rules (rather than the rules used by a majority of
subsystems or those preferred by Linus for example) it would add friction
to code re-use, movement, comparison, any tree-wide program
transformation, and also subsystem boundary changes.
Per-subsystem style rules are inherently contentious and therefore good
candidates for the "leave alone" functionality discussed in the issue
tracker.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 23:38 ` Joe Perches
2022-03-04 5:22 ` Bart Van Assche
2022-03-04 7:47 ` Finn Thain
@ 2022-03-04 12:31 ` Miguel Ojeda
2022-03-04 13:46 ` Tom Rix
3 siblings, 0 replies; 35+ messages in thread
From: Miguel Ojeda @ 2022-03-04 12:31 UTC (permalink / raw)
To: Joe Perches
Cc: Finn Thain, Konrad Wilhelm Kleine, Tom Rix, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, Mar 4, 2022 at 5:03 AM Joe Perches <joe@perches.com> wrote:
>
> It's up to individual maintainers to each decide on what might be
> considered unnecessary churn for the subsystems they control.
>
> One argument is that churn leads to difficulty in backporting
> fixes to older 'stable' versions.
>
> I think the churn argument is overstated.
I was only pointing out that, for the global `.clang-format` file, the
style in `coding-style.rst` should be followed. Then subsystem
maintainers may override it if really needed.
I definitely agree that we should aim to have a consistent style.
However, by allowing a few exceptions, some major subsystems may start
using `clang-format` sooner.
Cheers,
Miguel
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-03 23:38 ` Joe Perches
` (2 preceding siblings ...)
2022-03-04 12:31 ` Miguel Ojeda
@ 2022-03-04 13:46 ` Tom Rix
2022-03-04 14:02 ` Miguel Ojeda
3 siblings, 1 reply; 35+ messages in thread
From: Tom Rix @ 2022-03-04 13:46 UTC (permalink / raw)
To: Joe Perches, Miguel Ojeda, Finn Thain
Cc: Konrad Wilhelm Kleine, Bart Van Assche, kashyap.desai,
sumit.saxena, shivasharan.srikanteshwara, jejb, martin.petersen,
Nathan Chancellor, Nick Desaulniers, megaraidlinux.pdl, scsi,
linux-kernel, llvm
On 3/3/22 3:38 PM, Joe Perches wrote:
> On Fri, 2022-03-04 at 00:17 +0100, Miguel Ojeda wrote:
>> On Thu, Mar 3, 2022 at 11:44 PM Finn Thain <fthain@linux-m68k.org> wrote:
>>> Others might argue that they should always be changed from,
>>>
>>> /*
>>> * this style
>>> * of multiline comment
>>> */
>>>
>>> to
>>>
>>> /* this style
>>> * of multiline comment
>>> */
>> In general, for things that the coding style guide talks about, we
>> should follow them, even if some subsystems do not (they can always
>> override in their folder if they really, really want it). So, here for
>> instance, the first one should be used.
> It's up to individual maintainers to each decide on what might be
> considered unnecessary churn for the subsystems they control.
clang-format does not have an opt-in mechanism like indent, it is
all-or-nothing
What is done is all the settings in .clang-format and the default settings.
The churn level will be very high.
Until clang-format has an opt-in mechanism, I do not think clang-format
should be used.
.clang-format should be moved to staging/ to reflect its not being ready
status.
staging/ would be a good long term home. it's content should not need
backporting and is more likely to have style issues.
Tom
>
> One argument is that churn leads to difficulty in backporting
> fixes to older 'stable' versions.
>
> I think the churn argument is overstated.
>
>
^ permalink raw reply [flat|nested] 35+ messages in thread* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 13:46 ` Tom Rix
@ 2022-03-04 14:02 ` Miguel Ojeda
2022-03-04 17:36 ` Joe Perches
2022-03-04 22:38 ` Tom Rix
0 siblings, 2 replies; 35+ messages in thread
From: Miguel Ojeda @ 2022-03-04 14:02 UTC (permalink / raw)
To: Tom Rix
Cc: Joe Perches, Finn Thain, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, Mar 4, 2022 at 2:46 PM Tom Rix <trix@redhat.com> wrote:
>
> The churn level will be very high.
Nobody is planning to reformat the entire kernel, at least not until
the tool is close enough to the kernel style, which will take a while.
> Until clang-format has an opt-in mechanism, I do not think clang-format
> should be used.
>
> .clang-format should be moved to staging/ to reflect its not being ready
> status.
What is not ready about it?
It is a fairly useful tool that some people is already using, either
for full file formatting or for sections within their editor.
Cheers,
Miguel
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 14:02 ` Miguel Ojeda
@ 2022-03-04 17:36 ` Joe Perches
2022-03-04 18:48 ` Miguel Ojeda
2022-03-04 22:38 ` Tom Rix
1 sibling, 1 reply; 35+ messages in thread
From: Joe Perches @ 2022-03-04 17:36 UTC (permalink / raw)
To: Miguel Ojeda, Tom Rix
Cc: Finn Thain, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, 2022-03-04 at 15:02 +0100, Miguel Ojeda wrote:
> On Fri, Mar 4, 2022 at 2:46 PM Tom Rix <trix@redhat.com> wrote:
> >
> > The churn level will be very high.
>
> Nobody is planning to reformat the entire kernel, at least not until
> the tool is close enough to the kernel style, which will take a while.
I rather doubt clang-format will ever be 'close enough'.
A human's sense of 'taste' for reading code is very different than
what an automated tool produces.
For instance, clang-format does a quite poor job when comments are
intermixed with definitions.
Also, try looking at the changes clang-format does on a file chosen
at random:
$ clang-format -i drivers/hid/hid-sony.c
$ git diff drivers/hid/hid-sony.c
[...]
o columnarized definitions -> not columnarized
o odd line continuation placement using spaces and not tabs before \
o odd array definition layouts
o per line definitions with comments poorly laid out
o individual line definitions rewrapped
o enum definitions on multiple lines compressed to single lines
o u8 array definition layouts where the first element has a separate
meaning than the subsequent elements are compressed and made
difficult to understand
I think _some_ clang-format output is ok, but the concept of
enabling/disabling specific reformatting bits would be quite useful.
And sprinkling "clang-format on/off" lines in the code is not good.
Any control codes that determine when source code layout might be
immutable or allowed to be modified could be should be tool name
agnostic.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 17:36 ` Joe Perches
@ 2022-03-04 18:48 ` Miguel Ojeda
2022-03-04 19:28 ` Joe Perches
0 siblings, 1 reply; 35+ messages in thread
From: Miguel Ojeda @ 2022-03-04 18:48 UTC (permalink / raw)
To: Joe Perches
Cc: Tom Rix, Finn Thain, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, Mar 4, 2022 at 6:37 PM Joe Perches <joe@perches.com> wrote:
>
> I rather doubt clang-format will ever be 'close enough'.
>
> A human's sense of 'taste' for reading code is very different than
> what an automated tool produces.
Maybe, but it is a trade-off. If it is close enough, the benefits of
automatic formatting may overcome the downsides.
> Also, try looking at the changes clang-format does on a file chosen
> at random:
>
> o columnarized definitions -> not columnarized
> o odd line continuation placement using spaces and not tabs before \
> o odd array definition layouts
> o per line definitions with comments poorly laid out
> o individual line definitions rewrapped
> o enum definitions on multiple lines compressed to single lines
> o u8 array definition layouts where the first element has a separate
> meaning than the subsequent elements are compressed and made
> difficult to understand
I am not sure what you are trying to show here -- some of these are
precisely the things that the tool could improve or have already
improved, and we may just need to use the new option.
For instance, for the columnarized macros case, it is possible to
align them since clang-format 9. For array of structures, there is
also a new alignment option since clang-format 13. Etc.
For the wrapping and related bits, now that the limit on 80 is a bit
more fuzzy, we could perhaps tweak the penalties to improve the
decision making.
In summary, what we should be trying to do is improve the tool
configuration and tool itself to see if we can get it to be close
enough to the kernel style to make it more widely used.
> I think _some_ clang-format output is ok, but the concept of
> enabling/disabling specific reformatting bits would be quite useful.
>
> And sprinkling "clang-format on/off" lines in the code is not good.
Definitely, but it is fine in some exceptional cases.
> Any control codes that determine when source code layout might be
> immutable or allowed to be modified could be should be tool name
> agnostic.
I don't see why would that be a problem, and I don't understand why we
would use several different formatting tools (the point is to be
consistent, after all); but sure, we could propose an alternative
spelling.
Cheers,
Miguel
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 18:48 ` Miguel Ojeda
@ 2022-03-04 19:28 ` Joe Perches
2022-03-04 21:04 ` Miguel Ojeda
2022-03-05 3:32 ` Finn Thain
0 siblings, 2 replies; 35+ messages in thread
From: Joe Perches @ 2022-03-04 19:28 UTC (permalink / raw)
To: Miguel Ojeda
Cc: Tom Rix, Finn Thain, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, 2022-03-04 at 19:48 +0100, Miguel Ojeda wrote:
> On Fri, Mar 4, 2022 at 6:37 PM Joe Perches <joe@perches.com> wrote:
> >
> > I rather doubt clang-format will ever be 'close enough'.
> >
> > A human's sense of 'taste' for reading code is very different than
> > what an automated tool produces.
>
> Maybe,
Hey again Miguel.
Is that statement really disputable?
> but it is a trade-off. If it is close enough, the benefits of
> automatic formatting may overcome the downsides.
IYO. I think using an SCCS with better language understanding rather
than a line oriented one could be an improvement. Such a tool could
allow arbitrary style reformatting at check-in/check-out.
> > Also, try looking at the changes clang-format does on a file chosen
> > at random:
> >
> > o columnarized definitions -> not columnarized
> > o odd line continuation placement using spaces and not tabs before \
> > o odd array definition layouts
> > o per line definitions with comments poorly laid out
> > o individual line definitions rewrapped
> > o enum definitions on multiple lines compressed to single lines
> > o u8 array definition layouts where the first element has a separate
> > meaning than the subsequent elements are compressed and made
> > difficult to understand
>
> I am not sure what you are trying to show here -- some of these are
> precisely the things that the tool could improve or have already
> improved, and we may just need to use the new option.
All of these existing code are more human readable than the code
reformatted using clang-format.
I used whatever is the latest clang-format here with today's -next.
https://releases.llvm.org/download.html
> For instance, for the columnarized macros case, it is possible to
> align them since clang-format 9. For array of structures, there is
> also a new alignment option since clang-format 13. Etc.
Then perhaps you as the maintainer of the kernel's .clang-format file
could update the entries for those new options.
I believe the minimum clang version is already 11. Maybe higher.
I don't track clang or use it very much. The clang version I use
though is 13.
> For the wrapping and related bits, now that the limit on 80 is a bit
> more fuzzy, we could perhaps tweak the penalties to improve the
> decision making.
Please have at it.
But perhaps tweaking will just improve some cases and worsen others.
> In summary, what we should be trying to do is improve the tool
> configuration and tool itself to see if we can get it to be close
> enough to the kernel style to make it more widely used.
>
> > I think _some_ clang-format output is ok, but the concept of
> > enabling/disabling specific reformatting bits would be quite useful.
> >
> > And sprinkling "clang-format on/off" lines in the code is not good.
>
> Definitely, but it is fine in some exceptional cases.
I don't think so.
> > Any control codes that determine when source code layout might be
> > immutable or allowed to be modified could be should be tool name
> > agnostic.
>
> I don't see why would that be a problem, and I don't understand why we
> would use several different formatting tools (the point is to be
> consistent, after all); but sure, we could propose an alternative
> spelling.
Thanks.
There is no "one true editor".
There will not be "one true source code formatter" either.
cheers not jeers, just keep at it. Joe
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 19:28 ` Joe Perches
@ 2022-03-04 21:04 ` Miguel Ojeda
2022-03-05 3:32 ` Finn Thain
1 sibling, 0 replies; 35+ messages in thread
From: Miguel Ojeda @ 2022-03-04 21:04 UTC (permalink / raw)
To: Joe Perches
Cc: Tom Rix, Finn Thain, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, Mar 4, 2022 at 8:28 PM Joe Perches <joe@perches.com> wrote:
>
> Is that statement really disputable?
By "Maybe", I only mean that you may be right (or not), i.e. we cannot
really show one way or the other with data.
But note that many people (including projects, companies and even
programming languages) prefer consistency and automated formatting vs.
the alternative.
> IYO. I think using an SCCS with better language understanding rather
> than a line oriented one could be an improvement. Such a tool could
> allow arbitrary style reformatting at check-in/check-out.
clang-format is not line oriented. In fact, you may be able to get
quite close to what you suggest with clang-format if you have a
project that is automatically formatted.
> All of these existing code are more human readable than the code
> reformatted using clang-format.
That is subjective (for some it may be good enough), and anyway you
compared it to the current config file (clang-format 4). The point I
raised is that clang-format 13 and future versions should be closer to
what you expect.
And by saying "I rather doubt clang-format will ever be 'close
enough'.", then there is little incentive for the clang-format team to
actually add support the things we need...
> I used whatever is the latest clang-format here with today's -next.
> https://releases.llvm.org/download.html
I think this may be the source of confusion -- even if you use
clang-format 13, you need to edit the config file to use the new
options.
In other words, when I said something is supported since e.g.
clang-format 9, one still needs to enable it in the config file.
> Then perhaps you as the maintainer of the kernel's .clang-format file
> could update the entries for those new options.
No, I cannot, because that is an error, thus breaks users of old
clang-format versions.
That is why I suggested to track the minimum LLVM supported version in
the kernel, i.e. go at least to LLVM 11. And then over time keep
upgrading it and getting better output.
> I believe the minimum clang version is already 11. Maybe higher.
> I don't track clang or use it very much. The clang version I use
> though is 13.
Yes, I am aware, please see above. The issue and why I did not "just
do it" is that people could have been using clang-format from e.g.
their distro, but compiling with GCC.
> But perhaps tweaking will just improve some cases and worsen others.
Yes, of course.
> I don't think so.
Why?
> There is no "one true editor".
> There will not be "one true source code formatter" either.
Not for every project, but for a single project, there can definitely
be a "single formatter". In fact, that is what many other projects do
in practice in order to reach a point where automatic formatting is
done.
Cheers,
Miguel
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 19:28 ` Joe Perches
2022-03-04 21:04 ` Miguel Ojeda
@ 2022-03-05 3:32 ` Finn Thain
1 sibling, 0 replies; 35+ messages in thread
From: Finn Thain @ 2022-03-05 3:32 UTC (permalink / raw)
To: Joe Perches
Cc: Miguel Ojeda, Tom Rix, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On Fri, 4 Mar 2022, Joe Perches wrote:
>
> Is that statement really disputable?
>
If there was such a thing as an indisputable statement, a set of
universally accepted style rules would soon follow, I suspect.
...
>
> There is no "one true editor".
> There will not be "one true source code formatter" either.
>
It only has to be sufficiently good that it produces a consensus.
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-03-04 14:02 ` Miguel Ojeda
2022-03-04 17:36 ` Joe Perches
@ 2022-03-04 22:38 ` Tom Rix
1 sibling, 0 replies; 35+ messages in thread
From: Tom Rix @ 2022-03-04 22:38 UTC (permalink / raw)
To: Miguel Ojeda
Cc: Joe Perches, Finn Thain, Konrad Wilhelm Kleine, Bart Van Assche,
kashyap.desai, sumit.saxena, shivasharan.srikanteshwara, jejb,
martin.petersen, Nathan Chancellor, Nick Desaulniers,
megaraidlinux.pdl, scsi, linux-kernel, llvm
On 3/4/22 6:02 AM, Miguel Ojeda wrote:
> On Fri, Mar 4, 2022 at 2:46 PM Tom Rix <trix@redhat.com> wrote:
>> The churn level will be very high.
> Nobody is planning to reformat the entire kernel, at least not until
> the tool is close enough to the kernel style, which will take a while.
The churn on a single file like this is high.
There is no way to separate just one type of change, you get all the
changes.
Not having an opt-in/out per type of change is a flaw that makes
clang-format not ready.
Tom
>
>> Until clang-format has an opt-in mechanism, I do not think clang-format
>> should be used.
>>
>> .clang-format should be moved to staging/ to reflect its not being ready
>> status.
> What is not ready about it?
>
> It is a fairly useful tool that some people is already using, either
> for full file formatting or for sections within their editor.
>
> Cheers,
> Miguel
>
^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH] scsi: megaraid: cleanup formatting of megaraid
2022-01-28 19:11 ` Joe Perches
2022-01-28 19:37 ` Tom Rix
@ 2022-01-28 20:30 ` Bart Van Assche
1 sibling, 0 replies; 35+ messages in thread
From: Bart Van Assche @ 2022-01-28 20:30 UTC (permalink / raw)
To: Joe Perches, Tom Rix, kashyap.desai, sumit.saxena,
shivasharan.srikanteshwara, jejb, martin.petersen, nathan,
ndesaulniers
Cc: megaraidlinux.pdl, linux-scsi, linux-kernel, llvm
On 1/28/22 11:11, Joe Perches wrote:
> On Fri, 2022-01-28 at 09:59 -0800, Tom Rix wrote:
>> On 1/28/22 9:42 AM, Bart Van Assche wrote:
>>> Isn't this the kind of patches that carries more risk than value?
>
> Risk for whitespace style reformatting patches is quite low.
But the annoyance factor for patches that reformat an entire source file
is very high. It forces everyone who has conflicting patches pending to
wait until the reformatting patch went in, rebase their tree and also to
resolve the complicated merge conflicts that are the result of the
reformatting patch. I have already had to do this several times in the past.
Thanks,
Bart.
^ permalink raw reply [flat|nested] 35+ messages in thread
end of thread, other threads:[~2022-03-05 3:33 UTC | newest]
Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-01-27 15:19 [PATCH] scsi: megaraid: cleanup formatting of megaraid trix
2022-01-27 22:37 ` Finn Thain
2022-01-27 22:47 ` Nick Desaulniers
2022-01-28 0:32 ` Tom Rix
2022-01-28 2:43 ` Joe Perches
2022-01-28 5:31 ` Tom Rix
2022-01-28 8:41 ` Joe Perches
2022-01-28 15:30 ` Tom Rix
2022-01-28 16:23 ` Joe Perches
2022-01-28 23:45 ` Finn Thain
2022-01-28 9:39 ` Miguel Ojeda
2022-01-28 17:42 ` Bart Van Assche
2022-01-28 17:59 ` Tom Rix
2022-01-28 19:11 ` Joe Perches
2022-01-28 19:37 ` Tom Rix
2022-03-02 19:14 ` Tom Rix
2022-03-03 8:35 ` Finn Thain
2022-03-03 11:41 ` Konrad Wilhelm Kleine
[not found] ` <CABRYuGk+1AGpvfkR7=LTCm+bN4kt55fwQnQXCjidSXWxuMWsiQ@mail.gmail.com>
2022-03-03 22:44 ` Finn Thain
2022-03-03 23:17 ` Miguel Ojeda
2022-03-03 23:38 ` Joe Perches
2022-03-04 5:22 ` Bart Van Assche
2022-03-04 5:40 ` Joe Perches
2022-03-05 3:22 ` Finn Thain
2022-03-04 7:47 ` Finn Thain
2022-03-04 12:31 ` Miguel Ojeda
2022-03-04 13:46 ` Tom Rix
2022-03-04 14:02 ` Miguel Ojeda
2022-03-04 17:36 ` Joe Perches
2022-03-04 18:48 ` Miguel Ojeda
2022-03-04 19:28 ` Joe Perches
2022-03-04 21:04 ` Miguel Ojeda
2022-03-05 3:32 ` Finn Thain
2022-03-04 22:38 ` Tom Rix
2022-01-28 20:30 ` Bart Van Assche
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.