* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
[not found] ` <CABE0yyi9gS8nao0n1Dts_Og80R71h8PUkizy4rM9E9E3QbJwvA@mail.gmail.com>
@ 2020-12-09 2:05 ` Jianlin Shi
2020-12-09 17:20 ` Jakub Kicinski
0 siblings, 1 reply; 13+ messages in thread
From: Jianlin Shi @ 2020-12-09 2:05 UTC (permalink / raw)
To: CKI Project, netdev
Cc: skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
Hi ,
I reported a bug in bugzilla.kernel.org for geneve issue:
https://bugzilla.kernel.org/show_bug.cgi?id=210569
Thanks & Best Regards,
Jianlin Shi
On Tue, Dec 8, 2020 at 9:38 AM Jianlin Shi <jishi@redhat.com> wrote:
>
> Hi ,
>
>
> On Tue, Dec 8, 2020 at 8:25 AM CKI Project <cki-project@redhat.com> wrote:
>>
>>
>> Hello,
>>
>> We ran automated tests on a recent commit from this kernel tree:
>>
>> Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>> Commit: 7059c2c00a21 - Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
>>
>> The results of these automated tests are provided below.
>>
>> Overall result: FAILED (see details below)
>> Merge: OK
>> Compile: OK
>> Selftests compile: FAILED
>> Tests: FAILED
>>
>> Pipeline: https://xci32.lab.eng.rdu2.redhat.com/cki-project/cki-pipeline/-/pipelines/619303
>>
>> Check out our dashboard including known failures tagged by our bot at
>> https://datawarehouse.internal.cki-project.org/kcidb/revisions/7748
>>
>> One or more kernel tests failed:
>>
>> s390x:
>> ❌ LTP
>> ❌ Networking tunnel: geneve basic test
>>
>> ppc64le:
>> ❌ Boot test
>> ❌ LTP
>> ❌ Networking tunnel: geneve basic test
>>
>> aarch64:
>> ❌ storage: software RAID testing
>> ❌ LTP
>> ❌ Networking tunnel: geneve basic test
>>
>> x86_64:
>> ❌ LTP
>> ❌ Networking tunnel: geneve basic test
>
>
> the basic traffic over geneve would fail, could you help to check. Should we report a bug or not?
>
>
> ip netns add client
>
> ip netns add server
>
>
>
> ip link add veth0_c type veth peer name veth0_s
>
> ip link set veth0_c netns client
>
> ip link set veth0_s netns server
>
>
>
> ip netns exec client ip link set lo up
>
> ip netns exec client ip link set veth0_c up
>
>
>
> ip netns exec server ip link set lo up
>
> ip netns exec server ip link set veth0_s up
>
>
>
>
>
> ip netns exec client ip addr add 2000::1/64 dev veth0_c
>
> ip netns exec client ip addr add 10.10.0.1/24 dev veth0_c
>
>
>
> ip netns exec server ip addr add 2000::2/64 dev veth0_s
>
> ip netns exec server ip addr add 10.10.0.2/24 dev veth0_s
>
>
>
> ip netns exec client ping 10.10.0.2 -c 2
>
> ip netns exec client ping6 2000::2 -c 2
>
>
>
> ip netns exec client ip link add geneve1 type geneve vni 1234 remote 10.10.0.2 ttl 64
>
> ip netns exec server ip link add geneve1 type geneve vni 1234 remote 10.10.0.1 ttl 64
>
>
>
> ip netns exec client ip link set geneve1 up
>
> ip netns exec client ip addr add 1.1.1.1/24 dev geneve1
>
> ip netns exec server ip link set geneve1 up
>
> ip netns exec server ip addr add 1.1.1.2/24 dev geneve1
> ip netns exec client ping 1.1.1.2 -c 3
>
>
>>
>> ❌ storage: software RAID testing
>>
>> We hope that these logs can help you find the problem quickly. For the full
>> detail on our testing procedures, please scroll to the bottom of this message.
>>
>> Please reply to this email if you have any questions about the tests that we
>> ran or if you have any suggestions on how to make future tests more effective.
>>
>> ,-. ,-.
>> ( C ) ( K ) Continuous
>> `-',-.`-' Kernel
>> ( I ) Integration
>> `-'
>> ______________________________________________________________________________
>>
>> Compile testing
>> ---------------
>>
>> We compiled the kernel for 4 architectures:
>>
>> aarch64:
>> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
>>
>> ppc64le:
>> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
>>
>> s390x:
>> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
>>
>> x86_64:
>> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
>>
>>
>> We built the following selftests:
>>
>> x86_64:
>> net: OK
>> bpf: fail
>> install and packaging: OK
>>
>> You can find the full log (build-selftests.log) in the artifact storage above.
>>
>>
>> Hardware testing
>> ----------------
>> All the testing jobs are listed here:
>>
>> https://beaker.engineering.redhat.com/jobs/?jobsearch-0.table=Whiteboard&jobsearch-0.operation=contains&jobsearch-0.value=cki%40gitlab%3A619303
>>
>> We booted each kernel and ran the following tests:
>>
>> aarch64:
>> Host 1: https://beaker.engineering.redhat.com/recipes/9156933
>> ✅ Boot test
>> ✅ selinux-policy: serge-testsuite
>> ❌ storage: software RAID testing
>> ✅ stress: stress-ng
>> ❌ xfstests - ext4
>> ✅ xfstests - xfs
>> ✅ xfstests - btrfs
>> ❌ IPMI driver test
>> ✅ IPMItool loop stress test
>> ✅ Storage blktests
>> ✅ Storage block - filesystem fio test
>> ✅ Storage block - queue scheduler test
>> ✅ Storage nvme - tcp
>> ✅ Storage: swraid mdadm raid_module test
>>
>> Host 2: https://beaker.engineering.redhat.com/recipes/9156932
>> ✅ Boot test
>> ✅ ACPI table test
>> ✅ ACPI enabled test
>> ❌ LTP
>> ✅ Loopdev Sanity
>> ✅ Memory: fork_mem
>> ✅ Memory function: memfd_create
>> ✅ AMTU (Abstract Machine Test Utility)
>> ✅ Networking bridge: sanity
>> ✅ Networking socket: fuzz
>> ✅ Networking: igmp conformance test
>> ✅ Networking route: pmtu
>> ✅ Networking route_func - local
>> ✅ Networking route_func - forward
>> ✅ Networking TCP: keepalive test
>> ✅ Networking UDP: socket
>> ❌ Networking tunnel: geneve basic test
>> ✅ Networking tunnel: gre basic
>> ✅ L2TP basic test
>> ✅ Networking tunnel: vxlan basic
>> ✅ Networking ipsec: basic netns - transport
>> ✅ Networking ipsec: basic netns - tunnel
>> ✅ Libkcapi AF_ALG test
>> ✅ pciutils: update pci ids test
>> ✅ ALSA PCM loopback test
>> ✅ ALSA Control (mixer) Userspace Element test
>> ✅ storage: SCSI VPD
>> ✅ CIFS Connectathon
>> ✅ POSIX pjd-fstest suites
>> ✅ Firmware test suite
>> ✅ jvm - jcstress tests
>> ✅ Memory function: kaslr
>> ✅ Ethernet drivers sanity
>> ✅ Networking firewall: basic netfilter test
>> ✅ audit: audit testsuite test
>> ✅ trace: ftrace/tracer
>> ✅ kdump - kexec_boot
>>
>> ppc64le:
>> Host 1: https://beaker.engineering.redhat.com/recipes/9156935
>> ❌ Boot test
>> ⚡⚡⚡ selinux-policy: serge-testsuite
>> ⚡⚡⚡ storage: software RAID testing
>> ⚡⚡⚡ xfstests - ext4
>> ⚡⚡⚡ xfstests - xfs
>> ⚡⚡⚡ xfstests - btrfs
>> ⚡⚡⚡ IPMI driver test
>> ⚡⚡⚡ IPMItool loop stress test
>> ⚡⚡⚡ Storage blktests
>> ⚡⚡⚡ Storage block - filesystem fio test
>> ⚡⚡⚡ Storage block - queue scheduler test
>> ⚡⚡⚡ Storage nvme - tcp
>> ⚡⚡⚡ Storage: swraid mdadm raid_module test
>>
>> Host 2: https://beaker.engineering.redhat.com/recipes/9156934
>> ✅ Boot test
>> ❌ LTP
>> ✅ Loopdev Sanity
>> ✅ Memory: fork_mem
>> ✅ Memory function: memfd_create
>> ✅ AMTU (Abstract Machine Test Utility)
>> ✅ Networking bridge: sanity
>> ✅ Networking socket: fuzz
>> ✅ Networking route: pmtu
>> ✅ Networking route_func - local
>> ✅ Networking route_func - forward
>> ✅ Networking TCP: keepalive test
>> ✅ Networking UDP: socket
>> ❌ Networking tunnel: geneve basic test
>> ✅ Networking tunnel: gre basic
>> ✅ L2TP basic test
>> ✅ Networking tunnel: vxlan basic
>> ✅ Networking ipsec: basic netns - tunnel
>> ✅ Libkcapi AF_ALG test
>> ✅ pciutils: update pci ids test
>> ✅ ALSA PCM loopback test
>> ✅ ALSA Control (mixer) Userspace Element test
>> ✅ CIFS Connectathon
>> ✅ POSIX pjd-fstest suites
>> ✅ jvm - jcstress tests
>> ✅ Memory function: kaslr
>> ✅ Ethernet drivers sanity
>> ✅ Networking firewall: basic netfilter test
>> ✅ audit: audit testsuite test
>> ✅ trace: ftrace/tracer
>>
>> s390x:
>> Host 1: https://beaker.engineering.redhat.com/recipes/9156940
>> ✅ Boot test
>> ✅ selinux-policy: serge-testsuite
>> ✅ stress: stress-ng
>> ✅ Storage blktests
>> ❌ Storage nvme - tcp
>> ✅ Storage: swraid mdadm raid_module test
>>
>> Host 2: https://beaker.engineering.redhat.com/recipes/9156939
>> ✅ Boot test
>> ❌ LTP
>> ✅ Loopdev Sanity
>> ✅ Memory: fork_mem
>> ✅ Memory function: memfd_create
>> ✅ AMTU (Abstract Machine Test Utility)
>> ✅ Networking bridge: sanity
>> ✅ Networking route: pmtu
>> ✅ Networking route_func - local
>> ✅ Networking route_func - forward
>> ✅ Networking TCP: keepalive test
>> ✅ Networking UDP: socket
>> ❌ Networking tunnel: geneve basic test
>> ✅ Networking tunnel: gre basic
>> ✅ L2TP basic test
>> ✅ Networking tunnel: vxlan basic
>> ✅ Networking ipsec: basic netns - transport
>> ✅ Networking ipsec: basic netns - tunnel
>> ✅ Libkcapi AF_ALG test
>> ✅ CIFS Connectathon
>> ✅ POSIX pjd-fstest suites
>> ✅ jvm - jcstress tests
>> ✅ Memory function: kaslr
>> ✅ Ethernet drivers sanity
>> ✅ Networking firewall: basic netfilter test
>> ❌ audit: audit testsuite test
>> ✅ trace: ftrace/tracer
>>
>> x86_64:
>> Host 1: https://beaker.engineering.redhat.com/recipes/9156936
>> ✅ Boot test
>> ✅ ACPI table test
>> ❌ LTP
>> ✅ Loopdev Sanity
>> ✅ Memory: fork_mem
>> ✅ Memory function: memfd_create
>> ✅ AMTU (Abstract Machine Test Utility)
>> ✅ Networking bridge: sanity
>> ✅ Networking socket: fuzz
>> ✅ Networking: igmp conformance test
>> ✅ Networking route: pmtu
>> ✅ Networking route_func - local
>> ✅ Networking route_func - forward
>> ✅ Networking TCP: keepalive test
>> ✅ Networking UDP: socket
>> ❌ Networking tunnel: geneve basic test
>> ✅ Networking tunnel: gre basic
>> ✅ L2TP basic test
>> ✅ Networking tunnel: vxlan basic
>> ✅ Networking ipsec: basic netns - transport
>> ✅ Networking ipsec: basic netns - tunnel
>> ✅ Libkcapi AF_ALG test
>> ✅ pciutils: sanity smoke test
>> ✅ pciutils: update pci ids test
>> ✅ ALSA PCM loopback test
>> ✅ ALSA Control (mixer) Userspace Element test
>> ✅ storage: SCSI VPD
>> ✅ CIFS Connectathon
>> ✅ POSIX pjd-fstest suites
>> ✅ Firmware test suite
>> ✅ jvm - jcstress tests
>> ✅ Memory function: kaslr
>> ✅ Ethernet drivers sanity
>> ✅ Networking firewall: basic netfilter test
>> ✅ audit: audit testsuite test
>> ✅ trace: ftrace/tracer
>> ✅ kdump - kexec_boot
>>
>> Host 2: https://beaker.engineering.redhat.com/recipes/9156937
>> ✅ Boot test
>> ✅ kdump - sysrq-c
>> ✅ kdump - file-load
>>
>> Host 3: https://beaker.engineering.redhat.com/recipes/9156938
>>
>> ⚡ Internal infrastructure issues prevented one or more tests (marked
>> with ⚡⚡⚡) from running on this architecture.
>> This is not the fault of the kernel that was tested.
>>
>> ✅ Boot test
>> ✅ selinux-policy: serge-testsuite
>> ❌ storage: software RAID testing
>> ✅ stress: stress-ng
>> ❌ CPU: Frequency Driver Test
>> ✅ CPU: Idle Test
>> ❌ xfstests - ext4
>> ✅ xfstests - xfs
>> ✅ xfstests - btrfs
>> ⚡⚡⚡ IPMI driver test
>> ⚡⚡⚡ IPMItool loop stress test
>> ⚡⚡⚡ power-management: cpupower/sanity test
>> ⚡⚡⚡ Storage blktests
>> ⚡⚡⚡ Storage block - filesystem fio test
>> ⚡⚡⚡ Storage block - queue scheduler test
>> ⚡⚡⚡ Storage nvme - tcp
>> ⚡⚡⚡ Storage: swraid mdadm raid_module test
>>
>> Test sources: https://gitlab.com/cki-project/kernel-tests
>> Pull requests are welcome for new tests or improvements to existing tests!
>>
>> Aborted tests
>> -------------
>> Tests that didn't complete running successfully are marked with ⚡⚡⚡.
>> If this was caused by an infrastructure issue, we try to mark that
>> explicitly in the report.
>>
>> Waived tests
>> ------------
>> If the test run included waived tests, they are marked with . Such tests are
>> executed but their results are not taken into account. Tests are waived when
>> their results are not reliable enough, e.g. when they're just introduced or are
>> being fixed.
>>
>> Testing timeout
>> ---------------
>> We aim to provide a report within reasonable timeframe. Tests that haven't
>> finished running yet are marked with ⏱.
>>
>> Reproducing results
>> -------------------
>> Click on a link below to access a web page that allows you to adjust the
>> Beaker job and re-run any failed tests. These links are generated for
>> failed or aborted tests that are not waived. Please adjust the Beaker
>> job whiteboard string in the web page so that it is easy for you to find
>> and so that it is not confused with a regular CKI job.
>>
>> After clicking the "Submit the job!" button, a dialog will open that should
>> contain a link to the newly submitted Beaker job.
>>
>> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794082&recipe_id=9156933&recipe_id=9156932&job_id=4794082
>> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794083&recipe_id=9156935&recipe_id=9156934&job_id=4794083
>> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794085&recipe_id=9156939&job_id=4794085
>> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794084&recipe_id=9156936&recipe_id=9156938&job_id=4794084
>>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 2:05 ` ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org) Jianlin Shi
@ 2020-12-09 17:20 ` Jakub Kicinski
2020-12-09 17:35 ` Eric Dumazet
0 siblings, 1 reply; 13+ messages in thread
From: Jakub Kicinski @ 2020-12-09 17:20 UTC (permalink / raw)
To: Eric Dumazet
Cc: Jianlin Shi, CKI Project, netdev, skt-results-master, Yi Zhang,
Memory Management, Jan Stancek, Jianwen Ji, Hangbin Liu,
Ondrej Moris, Ondrej Mosnacek, Changhui Zhong, Xiong Zhou,
Rachel Sibley, David Arcari
Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull IP
header before ECN decapsulation")?
On Wed, 9 Dec 2020 10:05:14 +0800 Jianlin Shi wrote:
> Hi ,
>
> I reported a bug in bugzilla.kernel.org for geneve issue:
> https://bugzilla.kernel.org/show_bug.cgi?id=210569
>
> Thanks & Best Regards,
> Jianlin Shi
>
>
> On Tue, Dec 8, 2020 at 9:38 AM Jianlin Shi <jishi@redhat.com> wrote:
> >
> > Hi ,
> >
> >
> > On Tue, Dec 8, 2020 at 8:25 AM CKI Project <cki-project@redhat.com> wrote:
> >>
> >>
> >> Hello,
> >>
> >> We ran automated tests on a recent commit from this kernel tree:
> >>
> >> Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> >> Commit: 7059c2c00a21 - Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> >>
> >> The results of these automated tests are provided below.
> >>
> >> Overall result: FAILED (see details below)
> >> Merge: OK
> >> Compile: OK
> >> Selftests compile: FAILED
> >> Tests: FAILED
> >>
> >> Pipeline: https://xci32.lab.eng.rdu2.redhat.com/cki-project/cki-pipeline/-/pipelines/619303
> >>
> >> Check out our dashboard including known failures tagged by our bot at
> >> https://datawarehouse.internal.cki-project.org/kcidb/revisions/7748
> >>
> >> One or more kernel tests failed:
> >>
> >> s390x:
> >> ❌ LTP
> >> ❌ Networking tunnel: geneve basic test
> >>
> >> ppc64le:
> >> ❌ Boot test
> >> ❌ LTP
> >> ❌ Networking tunnel: geneve basic test
> >>
> >> aarch64:
> >> ❌ storage: software RAID testing
> >> ❌ LTP
> >> ❌ Networking tunnel: geneve basic test
> >>
> >> x86_64:
> >> ❌ LTP
> >> ❌ Networking tunnel: geneve basic test
> >
> >
> > the basic traffic over geneve would fail, could you help to check. Should we report a bug or not?
> >
> >
> > ip netns add client
> >
> > ip netns add server
> >
> >
> >
> > ip link add veth0_c type veth peer name veth0_s
> >
> > ip link set veth0_c netns client
> >
> > ip link set veth0_s netns server
> >
> >
> >
> > ip netns exec client ip link set lo up
> >
> > ip netns exec client ip link set veth0_c up
> >
> >
> >
> > ip netns exec server ip link set lo up
> >
> > ip netns exec server ip link set veth0_s up
> >
> >
> >
> >
> >
> > ip netns exec client ip addr add 2000::1/64 dev veth0_c
> >
> > ip netns exec client ip addr add 10.10.0.1/24 dev veth0_c
> >
> >
> >
> > ip netns exec server ip addr add 2000::2/64 dev veth0_s
> >
> > ip netns exec server ip addr add 10.10.0.2/24 dev veth0_s
> >
> >
> >
> > ip netns exec client ping 10.10.0.2 -c 2
> >
> > ip netns exec client ping6 2000::2 -c 2
> >
> >
> >
> > ip netns exec client ip link add geneve1 type geneve vni 1234 remote 10.10.0.2 ttl 64
> >
> > ip netns exec server ip link add geneve1 type geneve vni 1234 remote 10.10.0.1 ttl 64
> >
> >
> >
> > ip netns exec client ip link set geneve1 up
> >
> > ip netns exec client ip addr add 1.1.1.1/24 dev geneve1
> >
> > ip netns exec server ip link set geneve1 up
> >
> > ip netns exec server ip addr add 1.1.1.2/24 dev geneve1
> > ip netns exec client ping 1.1.1.2 -c 3
> >
> >
> >>
> >> ❌ storage: software RAID testing
> >>
> >> We hope that these logs can help you find the problem quickly. For the full
> >> detail on our testing procedures, please scroll to the bottom of this message.
> >>
> >> Please reply to this email if you have any questions about the tests that we
> >> ran or if you have any suggestions on how to make future tests more effective.
> >>
> >> ,-. ,-.
> >> ( C ) ( K ) Continuous
> >> `-',-.`-' Kernel
> >> ( I ) Integration
> >> `-'
> >> ______________________________________________________________________________
> >>
> >> Compile testing
> >> ---------------
> >>
> >> We compiled the kernel for 4 architectures:
> >>
> >> aarch64:
> >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> >>
> >> ppc64le:
> >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> >>
> >> s390x:
> >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> >>
> >> x86_64:
> >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> >>
> >>
> >> We built the following selftests:
> >>
> >> x86_64:
> >> net: OK
> >> bpf: fail
> >> install and packaging: OK
> >>
> >> You can find the full log (build-selftests.log) in the artifact storage above.
> >>
> >>
> >> Hardware testing
> >> ----------------
> >> All the testing jobs are listed here:
> >>
> >> https://beaker.engineering.redhat.com/jobs/?jobsearch-0.table=Whiteboard&jobsearch-0.operation=contains&jobsearch-0.value=cki%40gitlab%3A619303
> >>
> >> We booted each kernel and ran the following tests:
> >>
> >> aarch64:
> >> Host 1: https://beaker.engineering.redhat.com/recipes/9156933
> >> ✅ Boot test
> >> ✅ selinux-policy: serge-testsuite
> >> ❌ storage: software RAID testing
> >> ✅ stress: stress-ng
> >> ❌ xfstests - ext4
> >> ✅ xfstests - xfs
> >> ✅ xfstests - btrfs
> >> ❌ IPMI driver test
> >> ✅ IPMItool loop stress test
> >> ✅ Storage blktests
> >> ✅ Storage block - filesystem fio test
> >> ✅ Storage block - queue scheduler test
> >> ✅ Storage nvme - tcp
> >> ✅ Storage: swraid mdadm raid_module test
> >>
> >> Host 2: https://beaker.engineering.redhat.com/recipes/9156932
> >> ✅ Boot test
> >> ✅ ACPI table test
> >> ✅ ACPI enabled test
> >> ❌ LTP
> >> ✅ Loopdev Sanity
> >> ✅ Memory: fork_mem
> >> ✅ Memory function: memfd_create
> >> ✅ AMTU (Abstract Machine Test Utility)
> >> ✅ Networking bridge: sanity
> >> ✅ Networking socket: fuzz
> >> ✅ Networking: igmp conformance test
> >> ✅ Networking route: pmtu
> >> ✅ Networking route_func - local
> >> ✅ Networking route_func - forward
> >> ✅ Networking TCP: keepalive test
> >> ✅ Networking UDP: socket
> >> ❌ Networking tunnel: geneve basic test
> >> ✅ Networking tunnel: gre basic
> >> ✅ L2TP basic test
> >> ✅ Networking tunnel: vxlan basic
> >> ✅ Networking ipsec: basic netns - transport
> >> ✅ Networking ipsec: basic netns - tunnel
> >> ✅ Libkcapi AF_ALG test
> >> ✅ pciutils: update pci ids test
> >> ✅ ALSA PCM loopback test
> >> ✅ ALSA Control (mixer) Userspace Element test
> >> ✅ storage: SCSI VPD
> >> ✅ CIFS Connectathon
> >> ✅ POSIX pjd-fstest suites
> >> ✅ Firmware test suite
> >> ✅ jvm - jcstress tests
> >> ✅ Memory function: kaslr
> >> ✅ Ethernet drivers sanity
> >> ✅ Networking firewall: basic netfilter test
> >> ✅ audit: audit testsuite test
> >> ✅ trace: ftrace/tracer
> >> ✅ kdump - kexec_boot
> >>
> >> ppc64le:
> >> Host 1: https://beaker.engineering.redhat.com/recipes/9156935
> >> ❌ Boot test
> >> ⚡⚡⚡ selinux-policy: serge-testsuite
> >> ⚡⚡⚡ storage: software RAID testing
> >> ⚡⚡⚡ xfstests - ext4
> >> ⚡⚡⚡ xfstests - xfs
> >> ⚡⚡⚡ xfstests - btrfs
> >> ⚡⚡⚡ IPMI driver test
> >> ⚡⚡⚡ IPMItool loop stress test
> >> ⚡⚡⚡ Storage blktests
> >> ⚡⚡⚡ Storage block - filesystem fio test
> >> ⚡⚡⚡ Storage block - queue scheduler test
> >> ⚡⚡⚡ Storage nvme - tcp
> >> ⚡⚡⚡ Storage: swraid mdadm raid_module test
> >>
> >> Host 2: https://beaker.engineering.redhat.com/recipes/9156934
> >> ✅ Boot test
> >> ❌ LTP
> >> ✅ Loopdev Sanity
> >> ✅ Memory: fork_mem
> >> ✅ Memory function: memfd_create
> >> ✅ AMTU (Abstract Machine Test Utility)
> >> ✅ Networking bridge: sanity
> >> ✅ Networking socket: fuzz
> >> ✅ Networking route: pmtu
> >> ✅ Networking route_func - local
> >> ✅ Networking route_func - forward
> >> ✅ Networking TCP: keepalive test
> >> ✅ Networking UDP: socket
> >> ❌ Networking tunnel: geneve basic test
> >> ✅ Networking tunnel: gre basic
> >> ✅ L2TP basic test
> >> ✅ Networking tunnel: vxlan basic
> >> ✅ Networking ipsec: basic netns - tunnel
> >> ✅ Libkcapi AF_ALG test
> >> ✅ pciutils: update pci ids test
> >> ✅ ALSA PCM loopback test
> >> ✅ ALSA Control (mixer) Userspace Element test
> >> ✅ CIFS Connectathon
> >> ✅ POSIX pjd-fstest suites
> >> ✅ jvm - jcstress tests
> >> ✅ Memory function: kaslr
> >> ✅ Ethernet drivers sanity
> >> ✅ Networking firewall: basic netfilter test
> >> ✅ audit: audit testsuite test
> >> ✅ trace: ftrace/tracer
> >>
> >> s390x:
> >> Host 1: https://beaker.engineering.redhat.com/recipes/9156940
> >> ✅ Boot test
> >> ✅ selinux-policy: serge-testsuite
> >> ✅ stress: stress-ng
> >> ✅ Storage blktests
> >> ❌ Storage nvme - tcp
> >> ✅ Storage: swraid mdadm raid_module test
> >>
> >> Host 2: https://beaker.engineering.redhat.com/recipes/9156939
> >> ✅ Boot test
> >> ❌ LTP
> >> ✅ Loopdev Sanity
> >> ✅ Memory: fork_mem
> >> ✅ Memory function: memfd_create
> >> ✅ AMTU (Abstract Machine Test Utility)
> >> ✅ Networking bridge: sanity
> >> ✅ Networking route: pmtu
> >> ✅ Networking route_func - local
> >> ✅ Networking route_func - forward
> >> ✅ Networking TCP: keepalive test
> >> ✅ Networking UDP: socket
> >> ❌ Networking tunnel: geneve basic test
> >> ✅ Networking tunnel: gre basic
> >> ✅ L2TP basic test
> >> ✅ Networking tunnel: vxlan basic
> >> ✅ Networking ipsec: basic netns - transport
> >> ✅ Networking ipsec: basic netns - tunnel
> >> ✅ Libkcapi AF_ALG test
> >> ✅ CIFS Connectathon
> >> ✅ POSIX pjd-fstest suites
> >> ✅ jvm - jcstress tests
> >> ✅ Memory function: kaslr
> >> ✅ Ethernet drivers sanity
> >> ✅ Networking firewall: basic netfilter test
> >> ❌ audit: audit testsuite test
> >> ✅ trace: ftrace/tracer
> >>
> >> x86_64:
> >> Host 1: https://beaker.engineering.redhat.com/recipes/9156936
> >> ✅ Boot test
> >> ✅ ACPI table test
> >> ❌ LTP
> >> ✅ Loopdev Sanity
> >> ✅ Memory: fork_mem
> >> ✅ Memory function: memfd_create
> >> ✅ AMTU (Abstract Machine Test Utility)
> >> ✅ Networking bridge: sanity
> >> ✅ Networking socket: fuzz
> >> ✅ Networking: igmp conformance test
> >> ✅ Networking route: pmtu
> >> ✅ Networking route_func - local
> >> ✅ Networking route_func - forward
> >> ✅ Networking TCP: keepalive test
> >> ✅ Networking UDP: socket
> >> ❌ Networking tunnel: geneve basic test
> >> ✅ Networking tunnel: gre basic
> >> ✅ L2TP basic test
> >> ✅ Networking tunnel: vxlan basic
> >> ✅ Networking ipsec: basic netns - transport
> >> ✅ Networking ipsec: basic netns - tunnel
> >> ✅ Libkcapi AF_ALG test
> >> ✅ pciutils: sanity smoke test
> >> ✅ pciutils: update pci ids test
> >> ✅ ALSA PCM loopback test
> >> ✅ ALSA Control (mixer) Userspace Element test
> >> ✅ storage: SCSI VPD
> >> ✅ CIFS Connectathon
> >> ✅ POSIX pjd-fstest suites
> >> ✅ Firmware test suite
> >> ✅ jvm - jcstress tests
> >> ✅ Memory function: kaslr
> >> ✅ Ethernet drivers sanity
> >> ✅ Networking firewall: basic netfilter test
> >> ✅ audit: audit testsuite test
> >> ✅ trace: ftrace/tracer
> >> ✅ kdump - kexec_boot
> >>
> >> Host 2: https://beaker.engineering.redhat.com/recipes/9156937
> >> ✅ Boot test
> >> ✅ kdump - sysrq-c
> >> ✅ kdump - file-load
> >>
> >> Host 3: https://beaker.engineering.redhat.com/recipes/9156938
> >>
> >> ⚡ Internal infrastructure issues prevented one or more tests (marked
> >> with ⚡⚡⚡) from running on this architecture.
> >> This is not the fault of the kernel that was tested.
> >>
> >> ✅ Boot test
> >> ✅ selinux-policy: serge-testsuite
> >> ❌ storage: software RAID testing
> >> ✅ stress: stress-ng
> >> ❌ CPU: Frequency Driver Test
> >> ✅ CPU: Idle Test
> >> ❌ xfstests - ext4
> >> ✅ xfstests - xfs
> >> ✅ xfstests - btrfs
> >> ⚡⚡⚡ IPMI driver test
> >> ⚡⚡⚡ IPMItool loop stress test
> >> ⚡⚡⚡ power-management: cpupower/sanity test
> >> ⚡⚡⚡ Storage blktests
> >> ⚡⚡⚡ Storage block - filesystem fio test
> >> ⚡⚡⚡ Storage block - queue scheduler test
> >> ⚡⚡⚡ Storage nvme - tcp
> >> ⚡⚡⚡ Storage: swraid mdadm raid_module test
> >>
> >> Test sources: https://gitlab.com/cki-project/kernel-tests
> >> Pull requests are welcome for new tests or improvements to existing tests!
> >>
> >> Aborted tests
> >> -------------
> >> Tests that didn't complete running successfully are marked with ⚡⚡⚡.
> >> If this was caused by an infrastructure issue, we try to mark that
> >> explicitly in the report.
> >>
> >> Waived tests
> >> ------------
> >> If the test run included waived tests, they are marked with . Such tests are
> >> executed but their results are not taken into account. Tests are waived when
> >> their results are not reliable enough, e.g. when they're just introduced or are
> >> being fixed.
> >>
> >> Testing timeout
> >> ---------------
> >> We aim to provide a report within reasonable timeframe. Tests that haven't
> >> finished running yet are marked with ⏱.
> >>
> >> Reproducing results
> >> -------------------
> >> Click on a link below to access a web page that allows you to adjust the
> >> Beaker job and re-run any failed tests. These links are generated for
> >> failed or aborted tests that are not waived. Please adjust the Beaker
> >> job whiteboard string in the web page so that it is easy for you to find
> >> and so that it is not confused with a regular CKI job.
> >>
> >> After clicking the "Submit the job!" button, a dialog will open that should
> >> contain a link to the newly submitted Beaker job.
> >>
> >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794082&recipe_id=9156933&recipe_id=9156932&job_id=4794082
> >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794083&recipe_id=9156935&recipe_id=9156934&job_id=4794083
> >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794085&recipe_id=9156939&job_id=4794085
> >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794084&recipe_id=9156936&recipe_id=9156938&job_id=4794084
> >>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 17:20 ` Jakub Kicinski
@ 2020-12-09 17:35 ` Eric Dumazet
2020-12-09 18:05 ` Eric Dumazet
0 siblings, 1 reply; 13+ messages in thread
From: Eric Dumazet @ 2020-12-09 17:35 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Jianlin Shi, CKI Project, netdev, skt-results-master, Yi Zhang,
Memory Management, Jan Stancek, Jianwen Ji, Hangbin Liu,
Ondrej Moris, Ondrej Mosnacek, Changhui Zhong, Xiong Zhou,
Rachel Sibley, David Arcari
Hmm... maybe the ECN stuff has always been buggy then, and nobody cared...
On Wed, Dec 9, 2020 at 6:20 PM Jakub Kicinski <kuba@kernel.org> wrote:
>
> Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull IP
> header before ECN decapsulation")?
>
> On Wed, 9 Dec 2020 10:05:14 +0800 Jianlin Shi wrote:
> > Hi ,
> >
> > I reported a bug in bugzilla.kernel.org for geneve issue:
> > https://bugzilla.kernel.org/show_bug.cgi?id=210569
> >
> > Thanks & Best Regards,
> > Jianlin Shi
> >
> >
> > On Tue, Dec 8, 2020 at 9:38 AM Jianlin Shi <jishi@redhat.com> wrote:
> > >
> > > Hi ,
> > >
> > >
> > > On Tue, Dec 8, 2020 at 8:25 AM CKI Project <cki-project@redhat.com> wrote:
> > >>
> > >>
> > >> Hello,
> > >>
> > >> We ran automated tests on a recent commit from this kernel tree:
> > >>
> > >> Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > >> Commit: 7059c2c00a21 - Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> > >>
> > >> The results of these automated tests are provided below.
> > >>
> > >> Overall result: FAILED (see details below)
> > >> Merge: OK
> > >> Compile: OK
> > >> Selftests compile: FAILED
> > >> Tests: FAILED
> > >>
> > >> Pipeline: https://xci32.lab.eng.rdu2.redhat.com/cki-project/cki-pipeline/-/pipelines/619303
> > >>
> > >> Check out our dashboard including known failures tagged by our bot at
> > >> https://datawarehouse.internal.cki-project.org/kcidb/revisions/7748
> > >>
> > >> One or more kernel tests failed:
> > >>
> > >> s390x:
> > >> ❌ LTP
> > >> ❌ Networking tunnel: geneve basic test
> > >>
> > >> ppc64le:
> > >> ❌ Boot test
> > >> ❌ LTP
> > >> ❌ Networking tunnel: geneve basic test
> > >>
> > >> aarch64:
> > >> ❌ storage: software RAID testing
> > >> ❌ LTP
> > >> ❌ Networking tunnel: geneve basic test
> > >>
> > >> x86_64:
> > >> ❌ LTP
> > >> ❌ Networking tunnel: geneve basic test
> > >
> > >
> > > the basic traffic over geneve would fail, could you help to check. Should we report a bug or not?
> > >
> > >
> > > ip netns add client
> > >
> > > ip netns add server
> > >
> > >
> > >
> > > ip link add veth0_c type veth peer name veth0_s
> > >
> > > ip link set veth0_c netns client
> > >
> > > ip link set veth0_s netns server
> > >
> > >
> > >
> > > ip netns exec client ip link set lo up
> > >
> > > ip netns exec client ip link set veth0_c up
> > >
> > >
> > >
> > > ip netns exec server ip link set lo up
> > >
> > > ip netns exec server ip link set veth0_s up
> > >
> > >
> > >
> > >
> > >
> > > ip netns exec client ip addr add 2000::1/64 dev veth0_c
> > >
> > > ip netns exec client ip addr add 10.10.0.1/24 dev veth0_c
> > >
> > >
> > >
> > > ip netns exec server ip addr add 2000::2/64 dev veth0_s
> > >
> > > ip netns exec server ip addr add 10.10.0.2/24 dev veth0_s
> > >
> > >
> > >
> > > ip netns exec client ping 10.10.0.2 -c 2
> > >
> > > ip netns exec client ping6 2000::2 -c 2
> > >
> > >
> > >
> > > ip netns exec client ip link add geneve1 type geneve vni 1234 remote 10.10.0.2 ttl 64
> > >
> > > ip netns exec server ip link add geneve1 type geneve vni 1234 remote 10.10.0.1 ttl 64
> > >
> > >
> > >
> > > ip netns exec client ip link set geneve1 up
> > >
> > > ip netns exec client ip addr add 1.1.1.1/24 dev geneve1
> > >
> > > ip netns exec server ip link set geneve1 up
> > >
> > > ip netns exec server ip addr add 1.1.1.2/24 dev geneve1
> > > ip netns exec client ping 1.1.1.2 -c 3
> > >
> > >
> > >>
> > >> ❌ storage: software RAID testing
> > >>
> > >> We hope that these logs can help you find the problem quickly. For the full
> > >> detail on our testing procedures, please scroll to the bottom of this message.
> > >>
> > >> Please reply to this email if you have any questions about the tests that we
> > >> ran or if you have any suggestions on how to make future tests more effective.
> > >>
> > >> ,-. ,-.
> > >> ( C ) ( K ) Continuous
> > >> `-',-.`-' Kernel
> > >> ( I ) Integration
> > >> `-'
> > >> ______________________________________________________________________________
> > >>
> > >> Compile testing
> > >> ---------------
> > >>
> > >> We compiled the kernel for 4 architectures:
> > >>
> > >> aarch64:
> > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > >>
> > >> ppc64le:
> > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > >>
> > >> s390x:
> > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > >>
> > >> x86_64:
> > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > >>
> > >>
> > >> We built the following selftests:
> > >>
> > >> x86_64:
> > >> net: OK
> > >> bpf: fail
> > >> install and packaging: OK
> > >>
> > >> You can find the full log (build-selftests.log) in the artifact storage above.
> > >>
> > >>
> > >> Hardware testing
> > >> ----------------
> > >> All the testing jobs are listed here:
> > >>
> > >> https://beaker.engineering.redhat.com/jobs/?jobsearch-0.table=Whiteboard&jobsearch-0.operation=contains&jobsearch-0.value=cki%40gitlab%3A619303
> > >>
> > >> We booted each kernel and ran the following tests:
> > >>
> > >> aarch64:
> > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156933
> > >> ✅ Boot test
> > >> ✅ selinux-policy: serge-testsuite
> > >> ❌ storage: software RAID testing
> > >> ✅ stress: stress-ng
> > >> ❌ xfstests - ext4
> > >> ✅ xfstests - xfs
> > >> ✅ xfstests - btrfs
> > >> ❌ IPMI driver test
> > >> ✅ IPMItool loop stress test
> > >> ✅ Storage blktests
> > >> ✅ Storage block - filesystem fio test
> > >> ✅ Storage block - queue scheduler test
> > >> ✅ Storage nvme - tcp
> > >> ✅ Storage: swraid mdadm raid_module test
> > >>
> > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156932
> > >> ✅ Boot test
> > >> ✅ ACPI table test
> > >> ✅ ACPI enabled test
> > >> ❌ LTP
> > >> ✅ Loopdev Sanity
> > >> ✅ Memory: fork_mem
> > >> ✅ Memory function: memfd_create
> > >> ✅ AMTU (Abstract Machine Test Utility)
> > >> ✅ Networking bridge: sanity
> > >> ✅ Networking socket: fuzz
> > >> ✅ Networking: igmp conformance test
> > >> ✅ Networking route: pmtu
> > >> ✅ Networking route_func - local
> > >> ✅ Networking route_func - forward
> > >> ✅ Networking TCP: keepalive test
> > >> ✅ Networking UDP: socket
> > >> ❌ Networking tunnel: geneve basic test
> > >> ✅ Networking tunnel: gre basic
> > >> ✅ L2TP basic test
> > >> ✅ Networking tunnel: vxlan basic
> > >> ✅ Networking ipsec: basic netns - transport
> > >> ✅ Networking ipsec: basic netns - tunnel
> > >> ✅ Libkcapi AF_ALG test
> > >> ✅ pciutils: update pci ids test
> > >> ✅ ALSA PCM loopback test
> > >> ✅ ALSA Control (mixer) Userspace Element test
> > >> ✅ storage: SCSI VPD
> > >> ✅ CIFS Connectathon
> > >> ✅ POSIX pjd-fstest suites
> > >> ✅ Firmware test suite
> > >> ✅ jvm - jcstress tests
> > >> ✅ Memory function: kaslr
> > >> ✅ Ethernet drivers sanity
> > >> ✅ Networking firewall: basic netfilter test
> > >> ✅ audit: audit testsuite test
> > >> ✅ trace: ftrace/tracer
> > >> ✅ kdump - kexec_boot
> > >>
> > >> ppc64le:
> > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156935
> > >> ❌ Boot test
> > >> ⚡⚡⚡ selinux-policy: serge-testsuite
> > >> ⚡⚡⚡ storage: software RAID testing
> > >> ⚡⚡⚡ xfstests - ext4
> > >> ⚡⚡⚡ xfstests - xfs
> > >> ⚡⚡⚡ xfstests - btrfs
> > >> ⚡⚡⚡ IPMI driver test
> > >> ⚡⚡⚡ IPMItool loop stress test
> > >> ⚡⚡⚡ Storage blktests
> > >> ⚡⚡⚡ Storage block - filesystem fio test
> > >> ⚡⚡⚡ Storage block - queue scheduler test
> > >> ⚡⚡⚡ Storage nvme - tcp
> > >> ⚡⚡⚡ Storage: swraid mdadm raid_module test
> > >>
> > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156934
> > >> ✅ Boot test
> > >> ❌ LTP
> > >> ✅ Loopdev Sanity
> > >> ✅ Memory: fork_mem
> > >> ✅ Memory function: memfd_create
> > >> ✅ AMTU (Abstract Machine Test Utility)
> > >> ✅ Networking bridge: sanity
> > >> ✅ Networking socket: fuzz
> > >> ✅ Networking route: pmtu
> > >> ✅ Networking route_func - local
> > >> ✅ Networking route_func - forward
> > >> ✅ Networking TCP: keepalive test
> > >> ✅ Networking UDP: socket
> > >> ❌ Networking tunnel: geneve basic test
> > >> ✅ Networking tunnel: gre basic
> > >> ✅ L2TP basic test
> > >> ✅ Networking tunnel: vxlan basic
> > >> ✅ Networking ipsec: basic netns - tunnel
> > >> ✅ Libkcapi AF_ALG test
> > >> ✅ pciutils: update pci ids test
> > >> ✅ ALSA PCM loopback test
> > >> ✅ ALSA Control (mixer) Userspace Element test
> > >> ✅ CIFS Connectathon
> > >> ✅ POSIX pjd-fstest suites
> > >> ✅ jvm - jcstress tests
> > >> ✅ Memory function: kaslr
> > >> ✅ Ethernet drivers sanity
> > >> ✅ Networking firewall: basic netfilter test
> > >> ✅ audit: audit testsuite test
> > >> ✅ trace: ftrace/tracer
> > >>
> > >> s390x:
> > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156940
> > >> ✅ Boot test
> > >> ✅ selinux-policy: serge-testsuite
> > >> ✅ stress: stress-ng
> > >> ✅ Storage blktests
> > >> ❌ Storage nvme - tcp
> > >> ✅ Storage: swraid mdadm raid_module test
> > >>
> > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156939
> > >> ✅ Boot test
> > >> ❌ LTP
> > >> ✅ Loopdev Sanity
> > >> ✅ Memory: fork_mem
> > >> ✅ Memory function: memfd_create
> > >> ✅ AMTU (Abstract Machine Test Utility)
> > >> ✅ Networking bridge: sanity
> > >> ✅ Networking route: pmtu
> > >> ✅ Networking route_func - local
> > >> ✅ Networking route_func - forward
> > >> ✅ Networking TCP: keepalive test
> > >> ✅ Networking UDP: socket
> > >> ❌ Networking tunnel: geneve basic test
> > >> ✅ Networking tunnel: gre basic
> > >> ✅ L2TP basic test
> > >> ✅ Networking tunnel: vxlan basic
> > >> ✅ Networking ipsec: basic netns - transport
> > >> ✅ Networking ipsec: basic netns - tunnel
> > >> ✅ Libkcapi AF_ALG test
> > >> ✅ CIFS Connectathon
> > >> ✅ POSIX pjd-fstest suites
> > >> ✅ jvm - jcstress tests
> > >> ✅ Memory function: kaslr
> > >> ✅ Ethernet drivers sanity
> > >> ✅ Networking firewall: basic netfilter test
> > >> ❌ audit: audit testsuite test
> > >> ✅ trace: ftrace/tracer
> > >>
> > >> x86_64:
> > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156936
> > >> ✅ Boot test
> > >> ✅ ACPI table test
> > >> ❌ LTP
> > >> ✅ Loopdev Sanity
> > >> ✅ Memory: fork_mem
> > >> ✅ Memory function: memfd_create
> > >> ✅ AMTU (Abstract Machine Test Utility)
> > >> ✅ Networking bridge: sanity
> > >> ✅ Networking socket: fuzz
> > >> ✅ Networking: igmp conformance test
> > >> ✅ Networking route: pmtu
> > >> ✅ Networking route_func - local
> > >> ✅ Networking route_func - forward
> > >> ✅ Networking TCP: keepalive test
> > >> ✅ Networking UDP: socket
> > >> ❌ Networking tunnel: geneve basic test
> > >> ✅ Networking tunnel: gre basic
> > >> ✅ L2TP basic test
> > >> ✅ Networking tunnel: vxlan basic
> > >> ✅ Networking ipsec: basic netns - transport
> > >> ✅ Networking ipsec: basic netns - tunnel
> > >> ✅ Libkcapi AF_ALG test
> > >> ✅ pciutils: sanity smoke test
> > >> ✅ pciutils: update pci ids test
> > >> ✅ ALSA PCM loopback test
> > >> ✅ ALSA Control (mixer) Userspace Element test
> > >> ✅ storage: SCSI VPD
> > >> ✅ CIFS Connectathon
> > >> ✅ POSIX pjd-fstest suites
> > >> ✅ Firmware test suite
> > >> ✅ jvm - jcstress tests
> > >> ✅ Memory function: kaslr
> > >> ✅ Ethernet drivers sanity
> > >> ✅ Networking firewall: basic netfilter test
> > >> ✅ audit: audit testsuite test
> > >> ✅ trace: ftrace/tracer
> > >> ✅ kdump - kexec_boot
> > >>
> > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156937
> > >> ✅ Boot test
> > >> ✅ kdump - sysrq-c
> > >> ✅ kdump - file-load
> > >>
> > >> Host 3: https://beaker.engineering.redhat.com/recipes/9156938
> > >>
> > >> ⚡ Internal infrastructure issues prevented one or more tests (marked
> > >> with ⚡⚡⚡) from running on this architecture.
> > >> This is not the fault of the kernel that was tested.
> > >>
> > >> ✅ Boot test
> > >> ✅ selinux-policy: serge-testsuite
> > >> ❌ storage: software RAID testing
> > >> ✅ stress: stress-ng
> > >> ❌ CPU: Frequency Driver Test
> > >> ✅ CPU: Idle Test
> > >> ❌ xfstests - ext4
> > >> ✅ xfstests - xfs
> > >> ✅ xfstests - btrfs
> > >> ⚡⚡⚡ IPMI driver test
> > >> ⚡⚡⚡ IPMItool loop stress test
> > >> ⚡⚡⚡ power-management: cpupower/sanity test
> > >> ⚡⚡⚡ Storage blktests
> > >> ⚡⚡⚡ Storage block - filesystem fio test
> > >> ⚡⚡⚡ Storage block - queue scheduler test
> > >> ⚡⚡⚡ Storage nvme - tcp
> > >> ⚡⚡⚡ Storage: swraid mdadm raid_module test
> > >>
> > >> Test sources: https://gitlab.com/cki-project/kernel-tests
> > >> Pull requests are welcome for new tests or improvements to existing tests!
> > >>
> > >> Aborted tests
> > >> -------------
> > >> Tests that didn't complete running successfully are marked with ⚡⚡⚡.
> > >> If this was caused by an infrastructure issue, we try to mark that
> > >> explicitly in the report.
> > >>
> > >> Waived tests
> > >> ------------
> > >> If the test run included waived tests, they are marked with . Such tests are
> > >> executed but their results are not taken into account. Tests are waived when
> > >> their results are not reliable enough, e.g. when they're just introduced or are
> > >> being fixed.
> > >>
> > >> Testing timeout
> > >> ---------------
> > >> We aim to provide a report within reasonable timeframe. Tests that haven't
> > >> finished running yet are marked with ⏱.
> > >>
> > >> Reproducing results
> > >> -------------------
> > >> Click on a link below to access a web page that allows you to adjust the
> > >> Beaker job and re-run any failed tests. These links are generated for
> > >> failed or aborted tests that are not waived. Please adjust the Beaker
> > >> job whiteboard string in the web page so that it is easy for you to find
> > >> and so that it is not confused with a regular CKI job.
> > >>
> > >> After clicking the "Submit the job!" button, a dialog will open that should
> > >> contain a link to the newly submitted Beaker job.
> > >>
> > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794082&recipe_id=9156933&recipe_id=9156932&job_id=4794082
> > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794083&recipe_id=9156935&recipe_id=9156934&job_id=4794083
> > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794085&recipe_id=9156939&job_id=4794085
> > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794084&recipe_id=9156936&recipe_id=9156938&job_id=4794084
> > >>
> >
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 17:35 ` Eric Dumazet
@ 2020-12-09 18:05 ` Eric Dumazet
2020-12-09 18:34 ` Saeed Mahameed
0 siblings, 1 reply; 13+ messages in thread
From: Eric Dumazet @ 2020-12-09 18:05 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Jianlin Shi, CKI Project, netdev, skt-results-master, Yi Zhang,
Memory Management, Jan Stancek, Jianwen Ji, Hangbin Liu,
Ondrej Moris, Ondrej Mosnacek, Changhui Zhong, Xiong Zhou,
Rachel Sibley, David Arcari
On Wed, Dec 9, 2020 at 6:35 PM Eric Dumazet <edumazet@google.com> wrote:
>
> Hmm... maybe the ECN stuff has always been buggy then, and nobody cared...
>
Wait a minute, maybe this part was not needed,
diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index 8ae9ce2014a4a3ba7b962a209e28d1f65d4a83bd..896a7eb61d70340f69b9d3be0f795fbaab1458dd
100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -270,7 +270,7 @@ static void geneve_rx(struct geneve_dev *geneve,
struct geneve_sock *gs,
goto rx_error;
break;
default:
- goto rx_error;
+ break;
}
oiph = skb_network_header(skb);
skb_reset_network_header(skb);
>
> On Wed, Dec 9, 2020 at 6:20 PM Jakub Kicinski <kuba@kernel.org> wrote:
> >
> > Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull IP
> > header before ECN decapsulation")?
> >
> > On Wed, 9 Dec 2020 10:05:14 +0800 Jianlin Shi wrote:
> > > Hi ,
> > >
> > > I reported a bug in bugzilla.kernel.org for geneve issue:
> > > https://bugzilla.kernel.org/show_bug.cgi?id=210569
> > >
> > > Thanks & Best Regards,
> > > Jianlin Shi
> > >
> > >
> > > On Tue, Dec 8, 2020 at 9:38 AM Jianlin Shi <jishi@redhat.com> wrote:
> > > >
> > > > Hi ,
> > > >
> > > >
> > > > On Tue, Dec 8, 2020 at 8:25 AM CKI Project <cki-project@redhat.com> wrote:
> > > >>
> > > >>
> > > >> Hello,
> > > >>
> > > >> We ran automated tests on a recent commit from this kernel tree:
> > > >>
> > > >> Kernel repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > > >> Commit: 7059c2c00a21 - Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> > > >>
> > > >> The results of these automated tests are provided below.
> > > >>
> > > >> Overall result: FAILED (see details below)
> > > >> Merge: OK
> > > >> Compile: OK
> > > >> Selftests compile: FAILED
> > > >> Tests: FAILED
> > > >>
> > > >> Pipeline: https://xci32.lab.eng.rdu2.redhat.com/cki-project/cki-pipeline/-/pipelines/619303
> > > >>
> > > >> Check out our dashboard including known failures tagged by our bot at
> > > >> https://datawarehouse.internal.cki-project.org/kcidb/revisions/7748
> > > >>
> > > >> One or more kernel tests failed:
> > > >>
> > > >> s390x:
> > > >> ❌ LTP
> > > >> ❌ Networking tunnel: geneve basic test
> > > >>
> > > >> ppc64le:
> > > >> ❌ Boot test
> > > >> ❌ LTP
> > > >> ❌ Networking tunnel: geneve basic test
> > > >>
> > > >> aarch64:
> > > >> ❌ storage: software RAID testing
> > > >> ❌ LTP
> > > >> ❌ Networking tunnel: geneve basic test
> > > >>
> > > >> x86_64:
> > > >> ❌ LTP
> > > >> ❌ Networking tunnel: geneve basic test
> > > >
> > > >
> > > > the basic traffic over geneve would fail, could you help to check. Should we report a bug or not?
> > > >
> > > >
> > > > ip netns add client
> > > >
> > > > ip netns add server
> > > >
> > > >
> > > >
> > > > ip link add veth0_c type veth peer name veth0_s
> > > >
> > > > ip link set veth0_c netns client
> > > >
> > > > ip link set veth0_s netns server
> > > >
> > > >
> > > >
> > > > ip netns exec client ip link set lo up
> > > >
> > > > ip netns exec client ip link set veth0_c up
> > > >
> > > >
> > > >
> > > > ip netns exec server ip link set lo up
> > > >
> > > > ip netns exec server ip link set veth0_s up
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ip netns exec client ip addr add 2000::1/64 dev veth0_c
> > > >
> > > > ip netns exec client ip addr add 10.10.0.1/24 dev veth0_c
> > > >
> > > >
> > > >
> > > > ip netns exec server ip addr add 2000::2/64 dev veth0_s
> > > >
> > > > ip netns exec server ip addr add 10.10.0.2/24 dev veth0_s
> > > >
> > > >
> > > >
> > > > ip netns exec client ping 10.10.0.2 -c 2
> > > >
> > > > ip netns exec client ping6 2000::2 -c 2
> > > >
> > > >
> > > >
> > > > ip netns exec client ip link add geneve1 type geneve vni 1234 remote 10.10.0.2 ttl 64
> > > >
> > > > ip netns exec server ip link add geneve1 type geneve vni 1234 remote 10.10.0.1 ttl 64
> > > >
> > > >
> > > >
> > > > ip netns exec client ip link set geneve1 up
> > > >
> > > > ip netns exec client ip addr add 1.1.1.1/24 dev geneve1
> > > >
> > > > ip netns exec server ip link set geneve1 up
> > > >
> > > > ip netns exec server ip addr add 1.1.1.2/24 dev geneve1
> > > > ip netns exec client ping 1.1.1.2 -c 3
> > > >
> > > >
> > > >>
> > > >> ❌ storage: software RAID testing
> > > >>
> > > >> We hope that these logs can help you find the problem quickly. For the full
> > > >> detail on our testing procedures, please scroll to the bottom of this message.
> > > >>
> > > >> Please reply to this email if you have any questions about the tests that we
> > > >> ran or if you have any suggestions on how to make future tests more effective.
> > > >>
> > > >> ,-. ,-.
> > > >> ( C ) ( K ) Continuous
> > > >> `-',-.`-' Kernel
> > > >> ( I ) Integration
> > > >> `-'
> > > >> ______________________________________________________________________________
> > > >>
> > > >> Compile testing
> > > >> ---------------
> > > >>
> > > >> We compiled the kernel for 4 architectures:
> > > >>
> > > >> aarch64:
> > > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > > >>
> > > >> ppc64le:
> > > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > > >>
> > > >> s390x:
> > > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > > >>
> > > >> x86_64:
> > > >> make options: make -j30 INSTALL_MOD_STRIP=1 targz-pkg
> > > >>
> > > >>
> > > >> We built the following selftests:
> > > >>
> > > >> x86_64:
> > > >> net: OK
> > > >> bpf: fail
> > > >> install and packaging: OK
> > > >>
> > > >> You can find the full log (build-selftests.log) in the artifact storage above.
> > > >>
> > > >>
> > > >> Hardware testing
> > > >> ----------------
> > > >> All the testing jobs are listed here:
> > > >>
> > > >> https://beaker.engineering.redhat.com/jobs/?jobsearch-0.table=Whiteboard&jobsearch-0.operation=contains&jobsearch-0.value=cki%40gitlab%3A619303
> > > >>
> > > >> We booted each kernel and ran the following tests:
> > > >>
> > > >> aarch64:
> > > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156933
> > > >> ✅ Boot test
> > > >> ✅ selinux-policy: serge-testsuite
> > > >> ❌ storage: software RAID testing
> > > >> ✅ stress: stress-ng
> > > >> ❌ xfstests - ext4
> > > >> ✅ xfstests - xfs
> > > >> ✅ xfstests - btrfs
> > > >> ❌ IPMI driver test
> > > >> ✅ IPMItool loop stress test
> > > >> ✅ Storage blktests
> > > >> ✅ Storage block - filesystem fio test
> > > >> ✅ Storage block - queue scheduler test
> > > >> ✅ Storage nvme - tcp
> > > >> ✅ Storage: swraid mdadm raid_module test
> > > >>
> > > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156932
> > > >> ✅ Boot test
> > > >> ✅ ACPI table test
> > > >> ✅ ACPI enabled test
> > > >> ❌ LTP
> > > >> ✅ Loopdev Sanity
> > > >> ✅ Memory: fork_mem
> > > >> ✅ Memory function: memfd_create
> > > >> ✅ AMTU (Abstract Machine Test Utility)
> > > >> ✅ Networking bridge: sanity
> > > >> ✅ Networking socket: fuzz
> > > >> ✅ Networking: igmp conformance test
> > > >> ✅ Networking route: pmtu
> > > >> ✅ Networking route_func - local
> > > >> ✅ Networking route_func - forward
> > > >> ✅ Networking TCP: keepalive test
> > > >> ✅ Networking UDP: socket
> > > >> ❌ Networking tunnel: geneve basic test
> > > >> ✅ Networking tunnel: gre basic
> > > >> ✅ L2TP basic test
> > > >> ✅ Networking tunnel: vxlan basic
> > > >> ✅ Networking ipsec: basic netns - transport
> > > >> ✅ Networking ipsec: basic netns - tunnel
> > > >> ✅ Libkcapi AF_ALG test
> > > >> ✅ pciutils: update pci ids test
> > > >> ✅ ALSA PCM loopback test
> > > >> ✅ ALSA Control (mixer) Userspace Element test
> > > >> ✅ storage: SCSI VPD
> > > >> ✅ CIFS Connectathon
> > > >> ✅ POSIX pjd-fstest suites
> > > >> ✅ Firmware test suite
> > > >> ✅ jvm - jcstress tests
> > > >> ✅ Memory function: kaslr
> > > >> ✅ Ethernet drivers sanity
> > > >> ✅ Networking firewall: basic netfilter test
> > > >> ✅ audit: audit testsuite test
> > > >> ✅ trace: ftrace/tracer
> > > >> ✅ kdump - kexec_boot
> > > >>
> > > >> ppc64le:
> > > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156935
> > > >> ❌ Boot test
> > > >> ⚡⚡⚡ selinux-policy: serge-testsuite
> > > >> ⚡⚡⚡ storage: software RAID testing
> > > >> ⚡⚡⚡ xfstests - ext4
> > > >> ⚡⚡⚡ xfstests - xfs
> > > >> ⚡⚡⚡ xfstests - btrfs
> > > >> ⚡⚡⚡ IPMI driver test
> > > >> ⚡⚡⚡ IPMItool loop stress test
> > > >> ⚡⚡⚡ Storage blktests
> > > >> ⚡⚡⚡ Storage block - filesystem fio test
> > > >> ⚡⚡⚡ Storage block - queue scheduler test
> > > >> ⚡⚡⚡ Storage nvme - tcp
> > > >> ⚡⚡⚡ Storage: swraid mdadm raid_module test
> > > >>
> > > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156934
> > > >> ✅ Boot test
> > > >> ❌ LTP
> > > >> ✅ Loopdev Sanity
> > > >> ✅ Memory: fork_mem
> > > >> ✅ Memory function: memfd_create
> > > >> ✅ AMTU (Abstract Machine Test Utility)
> > > >> ✅ Networking bridge: sanity
> > > >> ✅ Networking socket: fuzz
> > > >> ✅ Networking route: pmtu
> > > >> ✅ Networking route_func - local
> > > >> ✅ Networking route_func - forward
> > > >> ✅ Networking TCP: keepalive test
> > > >> ✅ Networking UDP: socket
> > > >> ❌ Networking tunnel: geneve basic test
> > > >> ✅ Networking tunnel: gre basic
> > > >> ✅ L2TP basic test
> > > >> ✅ Networking tunnel: vxlan basic
> > > >> ✅ Networking ipsec: basic netns - tunnel
> > > >> ✅ Libkcapi AF_ALG test
> > > >> ✅ pciutils: update pci ids test
> > > >> ✅ ALSA PCM loopback test
> > > >> ✅ ALSA Control (mixer) Userspace Element test
> > > >> ✅ CIFS Connectathon
> > > >> ✅ POSIX pjd-fstest suites
> > > >> ✅ jvm - jcstress tests
> > > >> ✅ Memory function: kaslr
> > > >> ✅ Ethernet drivers sanity
> > > >> ✅ Networking firewall: basic netfilter test
> > > >> ✅ audit: audit testsuite test
> > > >> ✅ trace: ftrace/tracer
> > > >>
> > > >> s390x:
> > > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156940
> > > >> ✅ Boot test
> > > >> ✅ selinux-policy: serge-testsuite
> > > >> ✅ stress: stress-ng
> > > >> ✅ Storage blktests
> > > >> ❌ Storage nvme - tcp
> > > >> ✅ Storage: swraid mdadm raid_module test
> > > >>
> > > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156939
> > > >> ✅ Boot test
> > > >> ❌ LTP
> > > >> ✅ Loopdev Sanity
> > > >> ✅ Memory: fork_mem
> > > >> ✅ Memory function: memfd_create
> > > >> ✅ AMTU (Abstract Machine Test Utility)
> > > >> ✅ Networking bridge: sanity
> > > >> ✅ Networking route: pmtu
> > > >> ✅ Networking route_func - local
> > > >> ✅ Networking route_func - forward
> > > >> ✅ Networking TCP: keepalive test
> > > >> ✅ Networking UDP: socket
> > > >> ❌ Networking tunnel: geneve basic test
> > > >> ✅ Networking tunnel: gre basic
> > > >> ✅ L2TP basic test
> > > >> ✅ Networking tunnel: vxlan basic
> > > >> ✅ Networking ipsec: basic netns - transport
> > > >> ✅ Networking ipsec: basic netns - tunnel
> > > >> ✅ Libkcapi AF_ALG test
> > > >> ✅ CIFS Connectathon
> > > >> ✅ POSIX pjd-fstest suites
> > > >> ✅ jvm - jcstress tests
> > > >> ✅ Memory function: kaslr
> > > >> ✅ Ethernet drivers sanity
> > > >> ✅ Networking firewall: basic netfilter test
> > > >> ❌ audit: audit testsuite test
> > > >> ✅ trace: ftrace/tracer
> > > >>
> > > >> x86_64:
> > > >> Host 1: https://beaker.engineering.redhat.com/recipes/9156936
> > > >> ✅ Boot test
> > > >> ✅ ACPI table test
> > > >> ❌ LTP
> > > >> ✅ Loopdev Sanity
> > > >> ✅ Memory: fork_mem
> > > >> ✅ Memory function: memfd_create
> > > >> ✅ AMTU (Abstract Machine Test Utility)
> > > >> ✅ Networking bridge: sanity
> > > >> ✅ Networking socket: fuzz
> > > >> ✅ Networking: igmp conformance test
> > > >> ✅ Networking route: pmtu
> > > >> ✅ Networking route_func - local
> > > >> ✅ Networking route_func - forward
> > > >> ✅ Networking TCP: keepalive test
> > > >> ✅ Networking UDP: socket
> > > >> ❌ Networking tunnel: geneve basic test
> > > >> ✅ Networking tunnel: gre basic
> > > >> ✅ L2TP basic test
> > > >> ✅ Networking tunnel: vxlan basic
> > > >> ✅ Networking ipsec: basic netns - transport
> > > >> ✅ Networking ipsec: basic netns - tunnel
> > > >> ✅ Libkcapi AF_ALG test
> > > >> ✅ pciutils: sanity smoke test
> > > >> ✅ pciutils: update pci ids test
> > > >> ✅ ALSA PCM loopback test
> > > >> ✅ ALSA Control (mixer) Userspace Element test
> > > >> ✅ storage: SCSI VPD
> > > >> ✅ CIFS Connectathon
> > > >> ✅ POSIX pjd-fstest suites
> > > >> ✅ Firmware test suite
> > > >> ✅ jvm - jcstress tests
> > > >> ✅ Memory function: kaslr
> > > >> ✅ Ethernet drivers sanity
> > > >> ✅ Networking firewall: basic netfilter test
> > > >> ✅ audit: audit testsuite test
> > > >> ✅ trace: ftrace/tracer
> > > >> ✅ kdump - kexec_boot
> > > >>
> > > >> Host 2: https://beaker.engineering.redhat.com/recipes/9156937
> > > >> ✅ Boot test
> > > >> ✅ kdump - sysrq-c
> > > >> ✅ kdump - file-load
> > > >>
> > > >> Host 3: https://beaker.engineering.redhat.com/recipes/9156938
> > > >>
> > > >> ⚡ Internal infrastructure issues prevented one or more tests (marked
> > > >> with ⚡⚡⚡) from running on this architecture.
> > > >> This is not the fault of the kernel that was tested.
> > > >>
> > > >> ✅ Boot test
> > > >> ✅ selinux-policy: serge-testsuite
> > > >> ❌ storage: software RAID testing
> > > >> ✅ stress: stress-ng
> > > >> ❌ CPU: Frequency Driver Test
> > > >> ✅ CPU: Idle Test
> > > >> ❌ xfstests - ext4
> > > >> ✅ xfstests - xfs
> > > >> ✅ xfstests - btrfs
> > > >> ⚡⚡⚡ IPMI driver test
> > > >> ⚡⚡⚡ IPMItool loop stress test
> > > >> ⚡⚡⚡ power-management: cpupower/sanity test
> > > >> ⚡⚡⚡ Storage blktests
> > > >> ⚡⚡⚡ Storage block - filesystem fio test
> > > >> ⚡⚡⚡ Storage block - queue scheduler test
> > > >> ⚡⚡⚡ Storage nvme - tcp
> > > >> ⚡⚡⚡ Storage: swraid mdadm raid_module test
> > > >>
> > > >> Test sources: https://gitlab.com/cki-project/kernel-tests
> > > >> Pull requests are welcome for new tests or improvements to existing tests!
> > > >>
> > > >> Aborted tests
> > > >> -------------
> > > >> Tests that didn't complete running successfully are marked with ⚡⚡⚡.
> > > >> If this was caused by an infrastructure issue, we try to mark that
> > > >> explicitly in the report.
> > > >>
> > > >> Waived tests
> > > >> ------------
> > > >> If the test run included waived tests, they are marked with . Such tests are
> > > >> executed but their results are not taken into account. Tests are waived when
> > > >> their results are not reliable enough, e.g. when they're just introduced or are
> > > >> being fixed.
> > > >>
> > > >> Testing timeout
> > > >> ---------------
> > > >> We aim to provide a report within reasonable timeframe. Tests that haven't
> > > >> finished running yet are marked with ⏱.
> > > >>
> > > >> Reproducing results
> > > >> -------------------
> > > >> Click on a link below to access a web page that allows you to adjust the
> > > >> Beaker job and re-run any failed tests. These links are generated for
> > > >> failed or aborted tests that are not waived. Please adjust the Beaker
> > > >> job whiteboard string in the web page so that it is easy for you to find
> > > >> and so that it is not confused with a regular CKI job.
> > > >>
> > > >> After clicking the "Submit the job!" button, a dialog will open that should
> > > >> contain a link to the newly submitted Beaker job.
> > > >>
> > > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794082&recipe_id=9156933&recipe_id=9156932&job_id=4794082
> > > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794083&recipe_id=9156935&recipe_id=9156934&job_id=4794083
> > > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794085&recipe_id=9156939&job_id=4794085
> > > >> https://beaker-respin.internal.cki-project.org/respin?whiteboard=respin_job_4794084&recipe_id=9156936&recipe_id=9156938&job_id=4794084
> > > >>
> > >
> >
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 18:05 ` Eric Dumazet
@ 2020-12-09 18:34 ` Saeed Mahameed
2020-12-09 18:50 ` Eric Dumazet
0 siblings, 1 reply; 13+ messages in thread
From: Saeed Mahameed @ 2020-12-09 18:34 UTC (permalink / raw)
To: Eric Dumazet, Jakub Kicinski, Vladyslav Buslov
Cc: Jianlin Shi, CKI Project, netdev, skt-results-master, Yi Zhang,
Memory Management, Jan Stancek, Jianwen Ji, Hangbin Liu,
Ondrej Moris, Ondrej Mosnacek, Changhui Zhong, Xiong Zhou,
Rachel Sibley, David Arcari
On Wed, 2020-12-09 at 19:05 +0100, Eric Dumazet wrote:
> On Wed, Dec 9, 2020 at 6:35 PM Eric Dumazet <edumazet@google.com>
> wrote:
> > Hmm... maybe the ECN stuff has always been buggy then, and nobody
> > cared...
> >
>
> Wait a minute, maybe this part was not needed,
>
> diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
> index
> 8ae9ce2014a4a3ba7b962a209e28d1f65d4a83bd..896a7eb61d70340f69b9d3be0f7
> 95fbaab1458dd
> 100644
> --- a/drivers/net/geneve.c
> +++ b/drivers/net/geneve.c
> @@ -270,7 +270,7 @@ static void geneve_rx(struct geneve_dev *geneve,
> struct geneve_sock *gs,
> goto rx_error;
> break;
> default:
> - goto rx_error;
> + break;
> }
> oiph = skb_network_header(skb);
> skb_reset_network_header(skb);
>
>
> > On Wed, Dec 9, 2020 at 6:20 PM Jakub Kicinski <kuba@kernel.org>
> > wrote:
> > > Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull
> > > IP
> > > header before ECN decapsulation")?
> > >
We've bisected an issue in our CI to this patch, something about geneve
TC offload traffic not passing, I don't have all the details, Maybe
Vlad can chime in.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 18:34 ` Saeed Mahameed
@ 2020-12-09 18:50 ` Eric Dumazet
2020-12-09 20:54 ` Vlad Buslov
0 siblings, 1 reply; 13+ messages in thread
From: Eric Dumazet @ 2020-12-09 18:50 UTC (permalink / raw)
To: Saeed Mahameed
Cc: Jakub Kicinski, Vladyslav Buslov, Jianlin Shi, CKI Project,
netdev, skt-results-master, Yi Zhang, Memory Management,
Jan Stancek, Jianwen Ji, Hangbin Liu, Ondrej Moris,
Ondrej Mosnacek, Changhui Zhong, Xiong Zhou, Rachel Sibley,
David Arcari
On Wed, Dec 9, 2020 at 7:34 PM Saeed Mahameed <saeed@kernel.org> wrote:
>
> On Wed, 2020-12-09 at 19:05 +0100, Eric Dumazet wrote:
> > On Wed, Dec 9, 2020 at 6:35 PM Eric Dumazet <edumazet@google.com>
> > wrote:
> > > Hmm... maybe the ECN stuff has always been buggy then, and nobody
> > > cared...
> > >
> >
> > Wait a minute, maybe this part was not needed,
> >
> > diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
> > index
> > 8ae9ce2014a4a3ba7b962a209e28d1f65d4a83bd..896a7eb61d70340f69b9d3be0f7
> > 95fbaab1458dd
> > 100644
> > --- a/drivers/net/geneve.c
> > +++ b/drivers/net/geneve.c
> > @@ -270,7 +270,7 @@ static void geneve_rx(struct geneve_dev *geneve,
> > struct geneve_sock *gs,
> > goto rx_error;
> > break;
> > default:
> > - goto rx_error;
> > + break;
> > }
> > oiph = skb_network_header(skb);
> > skb_reset_network_header(skb);
> >
> >
> > > On Wed, Dec 9, 2020 at 6:20 PM Jakub Kicinski <kuba@kernel.org>
> > > wrote:
> > > > Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull
> > > > IP
> > > > header before ECN decapsulation")?
> > > >
>
> We've bisected an issue in our CI to this patch, something about geneve
> TC offload traffic not passing, I don't have all the details, Maybe
> Vlad can chime in.
>
Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
dropped ;)
I am testing this before offical patch submission.
Thanks !
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 18:50 ` Eric Dumazet
@ 2020-12-09 20:54 ` Vlad Buslov
2020-12-09 21:07 ` Eric Dumazet
2020-12-09 22:22 ` Jakub Kicinski
0 siblings, 2 replies; 13+ messages in thread
From: Vlad Buslov @ 2020-12-09 20:54 UTC (permalink / raw)
To: Eric Dumazet
Cc: Saeed Mahameed, Jakub Kicinski, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On Wed 09 Dec 2020 at 20:50, Eric Dumazet <edumazet@google.com> wrote:
> On Wed, Dec 9, 2020 at 7:34 PM Saeed Mahameed <saeed@kernel.org> wrote:
>>
>> On Wed, 2020-12-09 at 19:05 +0100, Eric Dumazet wrote:
>> > On Wed, Dec 9, 2020 at 6:35 PM Eric Dumazet <edumazet@google.com>
>> > wrote:
>> > > Hmm... maybe the ECN stuff has always been buggy then, and nobody
>> > > cared...
>> > >
>> >
>> > Wait a minute, maybe this part was not needed,
>> >
>> > diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
>> > index
>> > 8ae9ce2014a4a3ba7b962a209e28d1f65d4a83bd..896a7eb61d70340f69b9d3be0f7
>> > 95fbaab1458dd
>> > 100644
>> > --- a/drivers/net/geneve.c
>> > +++ b/drivers/net/geneve.c
>> > @@ -270,7 +270,7 @@ static void geneve_rx(struct geneve_dev *geneve,
>> > struct geneve_sock *gs,
>> > goto rx_error;
>> > break;
>> > default:
>> > - goto rx_error;
>> > + break;
>> > }
>> > oiph = skb_network_header(skb);
>> > skb_reset_network_header(skb);
>> >
>> >
>> > > On Wed, Dec 9, 2020 at 6:20 PM Jakub Kicinski <kuba@kernel.org>
>> > > wrote:
>> > > > Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull
>> > > > IP
>> > > > header before ECN decapsulation")?
>> > > >
>>
>> We've bisected an issue in our CI to this patch, something about geneve
>> TC offload traffic not passing, I don't have all the details, Maybe
>> Vlad can chime in.
>>
>
> Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
> dropped ;)
>
> I am testing this before offical patch submission.
>
> Thanks !
Hi Eric,
Your patch fixed TC geneve tests for me, but some of more complex OVS
tests are still failing. I'll try to provide details tomorrow.
Regards,
Vlad
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 20:54 ` Vlad Buslov
@ 2020-12-09 21:07 ` Eric Dumazet
2020-12-09 22:50 ` Jakub Kicinski
2020-12-09 22:22 ` Jakub Kicinski
1 sibling, 1 reply; 13+ messages in thread
From: Eric Dumazet @ 2020-12-09 21:07 UTC (permalink / raw)
To: Vlad Buslov
Cc: Saeed Mahameed, Jakub Kicinski, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On Wed, Dec 9, 2020 at 9:54 PM Vlad Buslov <vladbu@nvidia.com> wrote:
>
> On Wed 09 Dec 2020 at 20:50, Eric Dumazet <edumazet@google.com> wrote:
> > On Wed, Dec 9, 2020 at 7:34 PM Saeed Mahameed <saeed@kernel.org> wrote:
> >>
> >> On Wed, 2020-12-09 at 19:05 +0100, Eric Dumazet wrote:
> >> > On Wed, Dec 9, 2020 at 6:35 PM Eric Dumazet <edumazet@google.com>
> >> > wrote:
> >> > > Hmm... maybe the ECN stuff has always been buggy then, and nobody
> >> > > cared...
> >> > >
> >> >
> >> > Wait a minute, maybe this part was not needed,
> >> >
> >> > diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
> >> > index
> >> > 8ae9ce2014a4a3ba7b962a209e28d1f65d4a83bd..896a7eb61d70340f69b9d3be0f7
> >> > 95fbaab1458dd
> >> > 100644
> >> > --- a/drivers/net/geneve.c
> >> > +++ b/drivers/net/geneve.c
> >> > @@ -270,7 +270,7 @@ static void geneve_rx(struct geneve_dev *geneve,
> >> > struct geneve_sock *gs,
> >> > goto rx_error;
> >> > break;
> >> > default:
> >> > - goto rx_error;
> >> > + break;
> >> > }
> >> > oiph = skb_network_header(skb);
> >> > skb_reset_network_header(skb);
> >> >
> >> >
> >> > > On Wed, Dec 9, 2020 at 6:20 PM Jakub Kicinski <kuba@kernel.org>
> >> > > wrote:
> >> > > > Eric, could this possibly be commit 4179b00c04d1 ("geneve: pull
> >> > > > IP
> >> > > > header before ECN decapsulation")?
> >> > > >
> >>
> >> We've bisected an issue in our CI to this patch, something about geneve
> >> TC offload traffic not passing, I don't have all the details, Maybe
> >> Vlad can chime in.
> >>
> >
> > Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
> > dropped ;)
> >
> > I am testing this before offical patch submission.
> >
> > Thanks !
>
> Hi Eric,
>
> Your patch fixed TC geneve tests for me, but some of more complex OVS
> tests are still failing. I'll try to provide details tomorrow.
>
> Regards,
> Vlad
>
I think I need to study a bit more the original syzbot report.
Apparently, network header should have been pulled already before
hitting geneve_rx()
Jakub, please revert my patch, I need to fix the syzbot issue differently.
Thanks !
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 20:54 ` Vlad Buslov
2020-12-09 21:07 ` Eric Dumazet
@ 2020-12-09 22:22 ` Jakub Kicinski
2020-12-10 8:35 ` Vlad Buslov
1 sibling, 1 reply; 13+ messages in thread
From: Jakub Kicinski @ 2020-12-09 22:22 UTC (permalink / raw)
To: Vlad Buslov
Cc: Eric Dumazet, Saeed Mahameed, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On Wed, 9 Dec 2020 22:54:40 +0200 Vlad Buslov wrote:
> > Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
> > dropped ;)
> >
> > I am testing this before offical patch submission.
>
> Your patch fixed TC geneve tests for me, but some of more complex OVS
> tests are still failing. I'll try to provide details tomorrow.
Does a revert of Eric's patch fix it? For OvS is could also well be:
9c2e14b48119 ("ip_tunnels: Set tunnel option flag when tunnel metadata is present")
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 21:07 ` Eric Dumazet
@ 2020-12-09 22:50 ` Jakub Kicinski
0 siblings, 0 replies; 13+ messages in thread
From: Jakub Kicinski @ 2020-12-09 22:50 UTC (permalink / raw)
To: Eric Dumazet
Cc: Vlad Buslov, Saeed Mahameed, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On Wed, 9 Dec 2020 22:07:54 +0100 Eric Dumazet wrote:
> > Your patch fixed TC geneve tests for me, but some of more complex OVS
> > tests are still failing. I'll try to provide details tomorrow.
>
> I think I need to study a bit more the original syzbot report.
>
> Apparently, network header should have been pulled already before
> hitting geneve_rx()
>
> Jakub, please revert my patch, I need to fix the syzbot issue differently.
Done!
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-09 22:22 ` Jakub Kicinski
@ 2020-12-10 8:35 ` Vlad Buslov
2020-12-10 9:54 ` Eric Dumazet
2021-03-30 13:22 ` Eric Dumazet
0 siblings, 2 replies; 13+ messages in thread
From: Vlad Buslov @ 2020-12-10 8:35 UTC (permalink / raw)
To: Jakub Kicinski
Cc: Eric Dumazet, Saeed Mahameed, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On Thu 10 Dec 2020 at 00:22, Jakub Kicinski <kuba@kernel.org> wrote:
> On Wed, 9 Dec 2020 22:54:40 +0200 Vlad Buslov wrote:
>> > Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
>> > dropped ;)
>> >
>> > I am testing this before offical patch submission.
>>
>> Your patch fixed TC geneve tests for me, but some of more complex OVS
>> tests are still failing. I'll try to provide details tomorrow.
>
> Does a revert of Eric's patch fix it? For OvS is could also well be:
> 9c2e14b48119 ("ip_tunnels: Set tunnel option flag when tunnel metadata is present")
The tests pass with Eric's commit reverted.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-10 8:35 ` Vlad Buslov
@ 2020-12-10 9:54 ` Eric Dumazet
2021-03-30 13:22 ` Eric Dumazet
1 sibling, 0 replies; 13+ messages in thread
From: Eric Dumazet @ 2020-12-10 9:54 UTC (permalink / raw)
To: Vlad Buslov
Cc: Jakub Kicinski, Saeed Mahameed, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On Thu, Dec 10, 2020 at 9:35 AM Vlad Buslov <vladbu@nvidia.com> wrote:
>
> On Thu 10 Dec 2020 at 00:22, Jakub Kicinski <kuba@kernel.org> wrote:
> > On Wed, 9 Dec 2020 22:54:40 +0200 Vlad Buslov wrote:
> >> > Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
> >> > dropped ;)
> >> >
> >> > I am testing this before offical patch submission.
> >>
> >> Your patch fixed TC geneve tests for me, but some of more complex OVS
> >> tests are still failing. I'll try to provide details tomorrow.
> >
> > Does a revert of Eric's patch fix it? For OvS is could also well be:
> > 9c2e14b48119 ("ip_tunnels: Set tunnel option flag when tunnel metadata is present")
>
> The tests pass with Eric's commit reverted.
>
Thanks a lot for testing, I am truly sorry for the inconvenience :/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org)
2020-12-10 8:35 ` Vlad Buslov
2020-12-10 9:54 ` Eric Dumazet
@ 2021-03-30 13:22 ` Eric Dumazet
1 sibling, 0 replies; 13+ messages in thread
From: Eric Dumazet @ 2021-03-30 13:22 UTC (permalink / raw)
To: Vlad Buslov, Jakub Kicinski
Cc: Eric Dumazet, Saeed Mahameed, Jianlin Shi, CKI Project, netdev,
skt-results-master, Yi Zhang, Memory Management, Jan Stancek,
Jianwen Ji, Hangbin Liu, Ondrej Moris, Ondrej Mosnacek,
Changhui Zhong, Xiong Zhou, Rachel Sibley, David Arcari
On 12/10/20 9:35 AM, Vlad Buslov wrote:
> On Thu 10 Dec 2020 at 00:22, Jakub Kicinski <kuba@kernel.org> wrote:
>> On Wed, 9 Dec 2020 22:54:40 +0200 Vlad Buslov wrote:
>>>> Yes, I think the patch I sent should fix this, ETH_P_ARP should not be
>>>> dropped ;)
>>>>
>>>> I am testing this before offical patch submission.
>>>
>>> Your patch fixed TC geneve tests for me, but some of more complex OVS
>>> tests are still failing. I'll try to provide details tomorrow.
>>
>> Does a revert of Eric's patch fix it? For OvS is could also well be:
>> 9c2e14b48119 ("ip_tunnels: Set tunnel option flag when tunnel metadata is present")
>
> The tests pass with Eric's commit reverted.
>
I will release today the syzbot report, I am lacking time to fix the issue.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2021-03-30 13:22 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <cki.4066A31294.UNMQ21P718@redhat.com>
[not found] ` <CABE0yyi9gS8nao0n1Dts_Og80R71h8PUkizy4rM9E9E3QbJwvA@mail.gmail.com>
2020-12-09 2:05 ` ❌ FAIL: Test report for kernel 5.10.0-rc6 (mainline.kernel.org) Jianlin Shi
2020-12-09 17:20 ` Jakub Kicinski
2020-12-09 17:35 ` Eric Dumazet
2020-12-09 18:05 ` Eric Dumazet
2020-12-09 18:34 ` Saeed Mahameed
2020-12-09 18:50 ` Eric Dumazet
2020-12-09 20:54 ` Vlad Buslov
2020-12-09 21:07 ` Eric Dumazet
2020-12-09 22:50 ` Jakub Kicinski
2020-12-09 22:22 ` Jakub Kicinski
2020-12-10 8:35 ` Vlad Buslov
2020-12-10 9:54 ` Eric Dumazet
2021-03-30 13:22 ` Eric Dumazet
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.