* RFC Post Watchdog Daemon
@ 2018-03-29 1:32 Patrick Venture
0 siblings, 0 replies; only message in thread
From: Patrick Venture @ 2018-03-29 1:32 UTC (permalink / raw)
To: OpenBMC Maillist
https://gerrit.openbmc-project.xyz/#/c/9801/1
Take a look if you're interested -- or bored :D It's a watchdog
daemon that consumes postcodes from phosphor-host-postd and kicks the
phosphor-watchdog appropriately. It has the caveat though that you
can configure a different watchdog interval for a specific post code
such that you can drive watchdog behavior from the post codes to
enable custom behavior, such as allowing more time for the kernel to
start after BIOS or whatever you want. Or if you have a simple port
80h hardware watchdog driver that's out-of-band from IPMI :D
Patrick
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2018-03-29 1:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-29 1:32 RFC Post Watchdog Daemon Patrick Venture
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.