From: robertcnelson@gmail.com (Robert Nelson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH Resend v5 00/16] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support
Date: Wed, 27 Feb 2013 11:51:53 -0600 [thread overview]
Message-ID: <CAOCHtYhQsqhf1aBzh2giACMaeE0DXkcZm8qJ73rqn6njFcCaSA@mail.gmail.com> (raw)
In-Reply-To: <1361925297-11854-1-git-send-email-wenyou.yang@atmel.com>
On Tue, Feb 26, 2013 at 6:34 PM, Wenyou Yang <wenyou.yang@atmel.com> wrote:
> Hi All,
>
> This set of patches is to add dmaengine support for atmel spi and to test device tree support.
>
> The work is based on Nicolas and Richard's work.
>
> Because the Atmel DMA device tree support hasn't on mainline, to at91sam9x5ek and at91sam9n12ek
> with dma support, it doesn't work on the dmaengine mode, only on PIO mode so far.
>
> It has been tested as below:
> 1./tested on v3.8, by using mtd utils, "mount", "umount" and "cp" commands.
> 2./tested on "spi/next" git tree after removing commit "spi: make sure all transfer has proper speed set".
> 3./tested by using Documentation/spi/spidev_test.c on "/dev/spidev".
> 4./tested on on at91sam9x5ek, at91sam9m10g45ek, at91sam9263ek and at91sam9g20ek boards
Hi Wenyou,
Is this patchset missing another enablement patch? With v3.8.0 on the
at91sam9g35ek (device tree boot) I'm getting..
debian at arm:~$ dmesg | grep -i spi
[ 0.890625] atmel_spi f0000000.spi: version: 0x212
[ 0.890625] atmel_spi f0000000.spi: DMA channel not available,
unable to use SPI
[ 0.898437] atmel_spi f0000000.spi: Atmel SPI Controller using PIO only
[ 0.906250] atmel_spi f0000000.spi: Atmel SPI Controller at
0xf0000000 (irq 30)
[ 0.914062] atmel_spi f0000000.spi: master is unqueued, this is deprecated
debian at arm:~$ ls /dev/spi*
ls: cannot access /dev/spi*: No such file or directory
.config for reference, encase i missed something obvious:
https://github.com/RobertCNelson/armv5_devel/blob/v3.8.x-at91/patches/defconfig
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_ATMEL=y
CONFIG_SPI_SPIDEV=y
Regards,
--
Robert Nelson
http://www.rcn-ee.com/
next prev parent reply other threads:[~2013-02-27 17:51 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-27 0:34 [PATCH Resend v5 00/16] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Wenyou Yang
2013-02-27 0:37 ` [PATCH Resend v5 01/16] spi/spi-atmel: fix master->num_chipselect wrongly set Wenyou Yang
2013-02-27 0:37 ` Wenyou Yang
2013-02-27 0:38 ` [PATCH Resend v5 02/16] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register Wenyou Yang
2013-02-27 0:38 ` Wenyou Yang
2013-02-27 0:38 ` Wenyou Yang
2013-02-27 19:41 ` Joachim Eastwood
2013-02-27 19:41 ` Joachim Eastwood
2013-02-28 2:29 ` Yang, Wenyou
2013-02-28 2:29 ` Yang, Wenyou
2013-02-27 0:39 ` [PATCH Resend v5 03/16] spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0 Wenyou Yang
2013-02-27 0:39 ` [PATCH Resend v5 03/16] spi/spi-atmel: add support transfer on CS1, 2, 3, " Wenyou Yang
2013-02-27 0:40 ` [PATCH Resend v5 04/16] spi/spi-atmel: add physical base address Wenyou Yang
2013-02-27 0:40 ` Wenyou Yang
2013-02-27 0:41 ` [PATCH Resend v5 05/16] spi/spi-atmel: call unmapping on transfers buffers Wenyou Yang
2013-02-27 0:41 ` Wenyou Yang
2013-02-27 0:42 ` [PATCH Resend v5 06/16] spi/spi-atmel: status information passed through controller data Wenyou Yang
2013-02-27 0:42 ` Wenyou Yang
2013-02-27 0:42 ` [PATCH Resend v5 07/16] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
2013-02-27 0:42 ` Wenyou Yang
2013-02-27 0:43 ` [PATCH Resend v5 08/16] spi/spi-atmel: add dmaengine support Wenyou Yang
2013-02-27 0:43 ` Wenyou Yang
2013-02-27 0:44 ` [PATCH Resend v5 09/16] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-02-27 0:44 ` Wenyou Yang
2013-02-27 0:45 ` [PATCH Resend v5 10/16] spi/spi-atmel: correct 16 bits transfers using PIO Wenyou Yang
2013-02-27 0:45 ` Wenyou Yang
2013-02-27 0:46 ` [PATCH Resend v5 11/16] spi/spi-atmel: correct 16 bits transfers with DMA Wenyou Yang
2013-02-27 0:46 ` Wenyou Yang
2013-02-27 0:47 ` [PATCH Resend v5 12/16] spi/spi-atmel: add pinctrl support for atmel spi Wenyou Yang
2013-02-27 0:47 ` Wenyou Yang
2013-02-27 19:26 ` Joachim Eastwood
2013-02-27 19:26 ` Joachim Eastwood
2013-02-27 0:47 ` [PATCH Resend v5 13/16] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-02-27 0:47 ` Wenyou Yang
2013-02-27 0:48 ` [PATCH Resend v5 14/16] ARM: dts: add spi nodes for atmel SoC Wenyou Yang
2013-02-27 0:48 ` Wenyou Yang
2013-02-27 0:49 ` [PATCH Resend v5 15/16] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-02-27 0:49 ` Wenyou Yang
2013-02-27 0:49 ` [PATCH Resend v5 16/16] ARM: dts: add pinctrl property for spi node for atmel SoC Wenyou Yang
2013-02-27 0:49 ` Wenyou Yang
2013-02-27 17:51 ` Robert Nelson [this message]
2013-02-28 2:16 ` [PATCH Resend v5 00/16] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Yang, Wenyou
2013-03-18 15:15 ` Douglas Gilbert
2013-02-27 19:47 ` Joachim Eastwood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAOCHtYhQsqhf1aBzh2giACMaeE0DXkcZm8qJ73rqn6njFcCaSA@mail.gmail.com \
--to=robertcnelson@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.