[PATCH v5 01/15] clk: ingenic: Use const pointer to clk_ops in struct

[PATCH v5 01/15] clk: ingenic: Use const pointer to clk_ops in struct

[Paul Cercueil]

The CGU common code does not modify the pointed clk_ops structure, so it
should be marked as const.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.h        | 2 +-
 drivers/clk/ingenic/jz4780-cgu.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

 v2: New patch in this series
 v3: No change
 v4: No change
 v5: No change

diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index e78b586536ea..f1527cf75b3f 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -120,7 +120,7 @@ struct ingenic_cgu_gate_info {
  * @clk_ops: custom clock operation callbacks
  */
 struct ingenic_cgu_custom_info {
-	struct clk_ops *clk_ops;
+	const struct clk_ops *clk_ops;
 };
 
 /**
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ac3585ed8228..6427be117ff1 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -203,7 +203,7 @@ static int jz4780_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
-static struct clk_ops jz4780_otg_phy_ops = {
+static const struct clk_ops jz4780_otg_phy_ops = {
 	.get_parent = jz4780_otg_phy_get_parent,
 	.set_parent = jz4780_otg_phy_set_parent,
 
-- 
2.11.0

[PATCH v5 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[Paul Cercueil]

Previously, the clocks with a fixed divider would report their rate
as being the same as the one of their parent, independently of the
divider in use. This commit fixes this behaviour.

This went unnoticed as neither the jz4740 nor the jz4780 CGU code
have clocks with fixed dividers yet.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 2 ++
 1 file changed, 2 insertions(+)

 v2: No changes
 v3: No changes
 v4: No changes
 v5: No changes

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab393637f7b0..a2e73a6d60fd 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -328,6 +328,8 @@ ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 		div *= clk_info->div.div;
 
 		rate /= div;
+	} else if (clk_info->type & CGU_CLK_FIXDIV) {
+		rate /= clk_info->fixdiv.div;
 	}
 
 	return rate;
-- 
2.11.0

[PATCH v5 03/15] clk: ingenic: support PLLs with no bypass bit

[Paul Cercueil]

The second PLL of the JZ4770 does not have a bypass bit.
This commit makes it possible to support it with the current common CGU
code.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 3 ++-
 drivers/clk/ingenic/cgu.h | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index a2e73a6d60fd..381c4a17a1fc 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -100,7 +100,8 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
-	bypass = !!(ctl & BIT(pll_info->bypass_bit));
+	bypass = !pll_info->no_bypass_bit &&
+		 !!(ctl & BIT(pll_info->bypass_bit));
 	enable = !!(ctl & BIT(pll_info->enable_bit));
 
 	if (bypass)
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index f1527cf75b3f..9da34910bd80 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -48,6 +48,7 @@
  * @bypass_bit: the index of the bypass bit in the PLL control register
  * @enable_bit: the index of the enable bit in the PLL control register
  * @stable_bit: the index of the stable bit in the PLL control register
+ * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
 struct ingenic_cgu_pll_info {
 	unsigned reg;
@@ -58,6 +59,7 @@ struct ingenic_cgu_pll_info {
 	u8 bypass_bit;
 	u8 enable_bit;
 	u8 stable_bit;
+	bool no_bypass_bit;
 };
 
 /**
-- 
2.11.0

[PATCH v5 04/15] clk: ingenic: Add code to enable/disable PLLs

[Paul Cercueil]

This commit permits the PLLs to be dynamically enabled and disabled when
their children clocks are enabled and disabled.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 89 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 74 insertions(+), 15 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 381c4a17a1fc..56a712c9075f 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -107,9 +107,6 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	if (bypass)
 		return parent_rate;
 
-	if (!enable)
-		return 0;
-
 	for (od = 0; od < pll_info->od_max; od++) {
 		if (pll_info->od_encoding[od] == od_enc)
 			break;
@@ -153,17 +150,25 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	return div_u64((u64)parent_rate * m, n * od);
 }
 
-static long
-ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
-		       unsigned long *prate)
+static inline const struct ingenic_cgu_clk_info *to_clk_info(
+		struct ingenic_clk *ingenic_clk)
 {
-	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
 	const struct ingenic_cgu_clk_info *clk_info;
 
 	clk_info = &cgu->clock_info[ingenic_clk->idx];
 	BUG_ON(clk_info->type != CGU_CLK_PLL);
 
+	return clk_info;
+}
+
+static long
+ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		       unsigned long *prate)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+
 	return ingenic_pll_calc(clk_info, req_rate, *prate, NULL, NULL, NULL);
 }
 
@@ -171,19 +176,14 @@ static int
 ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 		     unsigned long parent_rate)
 {
-	const unsigned timeout = 100;
 	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
-	const struct ingenic_cgu_clk_info *clk_info;
-	const struct ingenic_cgu_pll_info *pll_info;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
 	unsigned long rate, flags;
-	unsigned m, n, od, i;
+	unsigned int m, n, od;
 	u32 ctl;
 
-	clk_info = &cgu->clock_info[ingenic_clk->idx];
-	BUG_ON(clk_info->type != CGU_CLK_PLL);
-	pll_info = &clk_info->pll;
-
 	rate = ingenic_pll_calc(clk_info, req_rate, parent_rate,
 			       &m, &n, &od);
 	if (rate != req_rate)
@@ -202,6 +202,26 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
+	writel(ctl, cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	return 0;
+}
+
+static int ingenic_pll_enable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	const unsigned int timeout = 100;
+	unsigned long flags;
+	unsigned int i;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+
 	ctl &= ~BIT(pll_info->bypass_bit);
 	ctl |= BIT(pll_info->enable_bit);
 
@@ -223,10 +243,48 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
+static void ingenic_pll_disable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	unsigned long flags;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+
+	ctl &= ~BIT(pll_info->enable_bit);
+
+	writel(ctl, cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+}
+
+static int ingenic_pll_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	unsigned long flags;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	return !!(ctl & BIT(pll_info->enable_bit));
+}
+
 static const struct clk_ops ingenic_pll_ops = {
 	.recalc_rate = ingenic_pll_recalc_rate,
 	.round_rate = ingenic_pll_round_rate,
 	.set_rate = ingenic_pll_set_rate,
+
+	.enable = ingenic_pll_enable,
+	.disable = ingenic_pll_disable,
+	.is_enabled = ingenic_pll_is_enabled,
 };
 
 /*
@@ -601,6 +659,7 @@ static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
 		}
 	} else if (caps & CGU_CLK_PLL) {
 		clk_init.ops = &ingenic_pll_ops;
+		clk_init.flags |= CLK_SET_RATE_GATE;
 
 		caps &= ~CGU_CLK_PLL;
 
-- 
2.11.0

[PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header

[Paul Cercueil]

This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4770-cgu driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 include/dt-bindings/clock/jz4770-cgu.h | 58 ++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 include/dt-bindings/clock/jz4770-cgu.h

 v3: New patch in this series
 v4: No change
 v5: Use SPDX license identifier

diff --git a/include/dt-bindings/clock/jz4770-cgu.h b/include/dt-bindings/clock/jz4770-cgu.h
new file mode 100644
index 000000000000..d68a7695a1f8
--- /dev/null
+++ b/include/dt-bindings/clock/jz4770-cgu.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,jz4770-cgu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4770_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4770_CGU_H__
+
+#define JZ4770_CLK_EXT		0
+#define JZ4770_CLK_OSC32K	1
+#define JZ4770_CLK_PLL0		2
+#define JZ4770_CLK_PLL1		3
+#define JZ4770_CLK_CCLK		4
+#define JZ4770_CLK_H0CLK	5
+#define JZ4770_CLK_H1CLK	6
+#define JZ4770_CLK_H2CLK	7
+#define JZ4770_CLK_C1CLK	8
+#define JZ4770_CLK_PCLK		9
+#define JZ4770_CLK_MMC0_MUX	10
+#define JZ4770_CLK_MMC0		11
+#define JZ4770_CLK_MMC1_MUX	12
+#define JZ4770_CLK_MMC1		13
+#define JZ4770_CLK_MMC2_MUX	14
+#define JZ4770_CLK_MMC2		15
+#define JZ4770_CLK_CIM		16
+#define JZ4770_CLK_UHC		17
+#define JZ4770_CLK_GPU		18
+#define JZ4770_CLK_BCH		19
+#define JZ4770_CLK_LPCLK_MUX	20
+#define JZ4770_CLK_GPS		21
+#define JZ4770_CLK_SSI_MUX	22
+#define JZ4770_CLK_PCM_MUX	23
+#define JZ4770_CLK_I2S		24
+#define JZ4770_CLK_OTG		25
+#define JZ4770_CLK_SSI0		26
+#define JZ4770_CLK_SSI1		27
+#define JZ4770_CLK_SSI2		28
+#define JZ4770_CLK_PCM0		29
+#define JZ4770_CLK_PCM1		30
+#define JZ4770_CLK_DMA		31
+#define JZ4770_CLK_I2C0		32
+#define JZ4770_CLK_I2C1		33
+#define JZ4770_CLK_I2C2		34
+#define JZ4770_CLK_UART0	35
+#define JZ4770_CLK_UART1	36
+#define JZ4770_CLK_UART2	37
+#define JZ4770_CLK_UART3	38
+#define JZ4770_CLK_IPU		39
+#define JZ4770_CLK_ADC		40
+#define JZ4770_CLK_AIC		41
+#define JZ4770_CLK_AUX		42
+#define JZ4770_CLK_VPU		43
+#define JZ4770_CLK_UHC_PHY	44
+#define JZ4770_CLK_OTG_PHY	45
+#define JZ4770_CLK_EXT512	46
+#define JZ4770_CLK_RTC		47
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4770_CGU_H__ */
-- 
2.11.0

[PATCH v5 06/15] clk: Add Ingenic jz4770 CGU driver

[Paul Cercueil]

Add support for the clocks provided by the CGU in the Ingenic JZ4770
SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/Makefile     |   1 +
 drivers/clk/ingenic/jz4770-cgu.c | 483 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 484 insertions(+)
 create mode 100644 drivers/clk/ingenic/jz4770-cgu.c

 v2: Make structures static const
 v3: <dt-bindings/clock/jz4770-cgu.h> is now added in a separate patch
 v4: No change
 v5: Use SPDX license identifier

diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index cd47b0664c2b..1456e4cdb562 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,3 +1,4 @@
 obj-y				+= cgu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
+obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
new file mode 100644
index 000000000000..c78d369b9403
--- /dev/null
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4770 SoC CGU driver
+ * Copyright 2018, Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include "cgu.h"
+
+/*
+ * CPM registers offset address definition
+ */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_LCR		0x04
+#define CGU_REG_CPPCR0		0x10
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_CPPCR1		0x30
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_USBCDR		0x50
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_UHCCDR		0x6c
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_GPSCDR		0x80
+#define CGU_REG_PCMCDR		0x84
+#define CGU_REG_GPUCDR		0x88
+#define CGU_REG_MSC1CDR		0xA4
+#define CGU_REG_MSC2CDR		0xA8
+#define CGU_REG_BCHCDR		0xAC
+
+/* bits within the LCR register */
+#define LCR_LPM			BIT(0)		/* Low Power Mode */
+
+/* bits within the OPCR register */
+#define OPCR_SPENDH		BIT(5)		/* UHC PHY suspend */
+#define OPCR_SPENDN		BIT(7)		/* OTG PHY suspend */
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_UHC_POWER	BIT(5)		/* UHC PHY power down */
+
+static struct ingenic_cgu *cgu;
+
+static int jz4770_uhc_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDH, reg_opcr);
+	writel(readl(reg_usbpcr1) | USBPCR1_UHC_POWER, reg_usbpcr1);
+	return 0;
+}
+
+static void jz4770_uhc_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	writel(readl(reg_usbpcr1) & ~USBPCR1_UHC_POWER, reg_usbpcr1);
+	writel(readl(reg_opcr) | OPCR_SPENDH, reg_opcr);
+}
+
+static int jz4770_uhc_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	return !(readl(reg_opcr) & OPCR_SPENDH) &&
+		(readl(reg_usbpcr1) & USBPCR1_UHC_POWER);
+}
+
+static const struct clk_ops jz4770_uhc_phy_ops = {
+	.enable = jz4770_uhc_phy_enable,
+	.disable = jz4770_uhc_phy_disable,
+	.is_enabled = jz4770_uhc_phy_is_enabled,
+};
+
+static int jz4770_otg_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	writel(readl(reg_opcr) | OPCR_SPENDN, reg_opcr);
+
+	/* Wait for the clock to be stable */
+	udelay(50);
+	return 0;
+}
+
+static void jz4770_otg_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDN, reg_opcr);
+}
+
+static int jz4770_otg_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	return !!(readl(reg_opcr) & OPCR_SPENDN);
+}
+
+static const struct clk_ops jz4770_otg_phy_ops = {
+	.enable = jz4770_otg_phy_enable,
+	.disable = jz4770_otg_phy_disable,
+	.is_enabled = jz4770_otg_phy_is_enabled,
+};
+
+static const s8 pll_od_encoding[8] = {
+	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
+};
+
+static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[JZ4770_CLK_EXT] = { "ext", CGU_CLK_EXT },
+	[JZ4770_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[JZ4770_CLK_PLL0] = {
+		"pll0", CGU_CLK_PLL,
+		.parents = { JZ4770_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR0,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 9,
+			.enable_bit = 8,
+			.stable_bit = 10,
+		},
+	},
+
+	[JZ4770_CLK_PLL1] = {
+		/* TODO: PLL1 can depend on PLL0 */
+		"pll1", CGU_CLK_PLL,
+		.parents = { JZ4770_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR1,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.enable_bit = 7,
+			.stable_bit = 6,
+			.no_bypass_bit = true,
+		},
+	},
+
+	/* Main clocks */
+
+	[JZ4770_CLK_CCLK] = {
+		"cclk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_H0CLK] = {
+		"h0clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_H1CLK] = {
+		"h1clk", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1 },
+		.gate = { CGU_REG_LCR, 30 },
+	},
+	[JZ4770_CLK_H2CLK] = {
+		"h2clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_C1CLK] = {
+		"c1clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1 },
+	},
+
+	/* Those divided clocks can connect to PLL0 or PLL1 */
+
+	[JZ4770_CLK_MMC0_MUX] = {
+		"mmc0_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC0CDR, 30, 1 },
+		.div = { CGU_REG_MSC0CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC0CDR, 31 },
+	},
+	[JZ4770_CLK_MMC1_MUX] = {
+		"mmc1_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC1CDR, 30, 1 },
+		.div = { CGU_REG_MSC1CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC1CDR, 31 },
+	},
+	[JZ4770_CLK_MMC2_MUX] = {
+		"mmc2_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC2CDR, 30, 1 },
+		.div = { CGU_REG_MSC2CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC2CDR, 31 },
+	},
+	[JZ4770_CLK_CIM] = {
+		"cim", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_CIMCDR, 31, 1 },
+		.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 26 },
+	},
+	[JZ4770_CLK_UHC] = {
+		"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_UHCCDR, 29, 1 },
+		.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 24 },
+	},
+	[JZ4770_CLK_GPU] = {
+		"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, -1 },
+		.mux = { CGU_REG_GPUCDR, 31, 1 },
+		.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 9 },
+	},
+	[JZ4770_CLK_BCH] = {
+		"bch", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_BCHCDR, 31, 1 },
+		.div = { CGU_REG_BCHCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 1 },
+	},
+	[JZ4770_CLK_LPCLK_MUX] = {
+		"lpclk", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_LPCDR, 29, 1 },
+		.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 28 },
+	},
+	[JZ4770_CLK_GPS] = {
+		"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_GPSCDR, 31, 1 },
+		.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 22 },
+	},
+
+	/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
+
+	[JZ4770_CLK_SSI_MUX] = {
+		"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_SSICDR, 30, 2 },
+		.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1 },
+	},
+	[JZ4770_CLK_PCM_MUX] = {
+		"pcm_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_PCMCDR, 30, 2 },
+		.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1 },
+	},
+	[JZ4770_CLK_I2S] = {
+		"i2s", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_I2SCDR, 30, 2 },
+		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 13 },
+	},
+	[JZ4770_CLK_OTG] = {
+		"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_USBCDR, 30, 2 },
+		.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 2 },
+	},
+
+	/* Gate-only clocks */
+
+	[JZ4770_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+	[JZ4770_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+	[JZ4770_CLK_SSI2] = {
+		"ssi2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+	[JZ4770_CLK_PCM0] = {
+		"pcm0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PCM_MUX, },
+		.gate = { CGU_REG_CLKGR1, 8 },
+	},
+	[JZ4770_CLK_PCM1] = {
+		"pcm1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PCM_MUX, },
+		.gate = { CGU_REG_CLKGR1, 10 },
+	},
+	[JZ4770_CLK_DMA] = {
+		"dma", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H2CLK, },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+	[JZ4770_CLK_I2C0] = {
+		"i2c0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+	[JZ4770_CLK_I2C1] = {
+		"i2c1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+	[JZ4770_CLK_I2C2] = {
+		"i2c2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR1, 15 },
+	},
+	[JZ4770_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+	[JZ4770_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 16 },
+	},
+	[JZ4770_CLK_UART2] = {
+		"uart2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 17 },
+	},
+	[JZ4770_CLK_UART3] = {
+		"uart3", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 18 },
+	},
+	[JZ4770_CLK_IPU] = {
+		"ipu", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H0CLK, },
+		.gate = { CGU_REG_CLKGR0, 29 },
+	},
+	[JZ4770_CLK_ADC] = {
+		"adc", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+	[JZ4770_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+	[JZ4770_CLK_AUX] = {
+		"aux", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_C1CLK, },
+		.gate = { CGU_REG_CLKGR1, 14 },
+	},
+	[JZ4770_CLK_VPU] = {
+		"vpu", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H1CLK, },
+		.gate = { CGU_REG_CLKGR1, 7 },
+	},
+	[JZ4770_CLK_MMC0] = {
+		"mmc0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC0_MUX, },
+		.gate = { CGU_REG_CLKGR0, 3 },
+	},
+	[JZ4770_CLK_MMC1] = {
+		"mmc1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC1_MUX, },
+		.gate = { CGU_REG_CLKGR0, 11 },
+	},
+	[JZ4770_CLK_MMC2] = {
+		"mmc2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC2_MUX, },
+		.gate = { CGU_REG_CLKGR0, 12 },
+	},
+
+	/* Custom clocks */
+
+	[JZ4770_CLK_UHC_PHY] = {
+		"uhc_phy", CGU_CLK_CUSTOM,
+		.parents = { JZ4770_CLK_UHC, -1, -1, -1 },
+		.custom = { &jz4770_uhc_phy_ops },
+	},
+	[JZ4770_CLK_OTG_PHY] = {
+		"usb_phy", CGU_CLK_CUSTOM,
+		.parents = { JZ4770_CLK_OTG, -1, -1, -1 },
+		.custom = { &jz4770_otg_phy_ops },
+	},
+
+	[JZ4770_CLK_EXT512] = {
+		"ext/512", CGU_CLK_FIXDIV,
+		.parents = { JZ4770_CLK_EXT },
+		.fixdiv = { 512 },
+	},
+
+	[JZ4770_CLK_RTC] = {
+		"rtc", CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT512, JZ4770_CLK_OSC32K, },
+		.mux = { CGU_REG_OPCR, 2, 1},
+	},
+};
+
+#if IS_ENABLED(CONFIG_PM_SLEEP)
+static int jz4770_cgu_pm_suspend(void)
+{
+	u32 val;
+
+	val = readl(cgu->base + CGU_REG_LCR);
+	writel(val | LCR_LPM, cgu->base + CGU_REG_LCR);
+	return 0;
+}
+
+static void jz4770_cgu_pm_resume(void)
+{
+	u32 val;
+
+	val = readl(cgu->base + CGU_REG_LCR);
+	writel(val & ~LCR_LPM, cgu->base + CGU_REG_LCR);
+}
+
+static struct syscore_ops jz4770_cgu_pm_ops = {
+	.suspend = jz4770_cgu_pm_suspend,
+	.resume = jz4770_cgu_pm_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+static void __init jz4770_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
+			      ARRAY_SIZE(jz4770_cgu_clocks), np);
+	if (!cgu)
+		pr_err("%s: failed to initialise CGU\n", __func__);
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval)
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+#if IS_ENABLED(CONFIG_PM_SLEEP)
+	register_syscore_ops(&jz4770_cgu_pm_ops);
+#endif
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-cgu", jz4770_cgu_init);
-- 
2.11.0

[PATCH v5 07/15] MIPS: Setup boot_command_line before plat_mem_setup

[Paul Cercueil]

From: Paul Burton <paul.burton@imgtec.com>

Platforms using DT will typically call __dt_setup_arch from
plat_mem_setup. This in turn calls early_init_dt_scan. When
CONFIG_CMDLINE is set, this leads to its value being copied into
boot_command_line by early_init_dt_scan_chosen. If this happens before
the code setting up boot_command_line in arch_mem_init runs, that code
will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
boot_command_line again, duplicating it. For some command line
parameters (eg. earlycon) this can be a problem. Set up
boot_command_line before early_init_dt_scan_chosen gets called such that
it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
duplicated.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
 arch/mips/kernel/setup.c | 39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

 v2: New patch in this series
 v3: No change
 v4: No change
 v5: No change

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 702c678de116..85bc601e9a0d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -826,25 +826,6 @@ static void __init arch_mem_init(char **cmdline_p)
 	struct memblock_region *reg;
 	extern void plat_mem_setup(void);
 
-	/* call board setup routine */
-	plat_mem_setup();
-
-	/*
-	 * Make sure all kernel memory is in the maps.  The "UP" and
-	 * "DOWN" are opposite for initdata since if it crosses over
-	 * into another memory section you don't want that to be
-	 * freed when the initdata is freed.
-	 */
-	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
-			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
-			 BOOT_MEM_RAM);
-	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
-			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
-			 BOOT_MEM_INIT_RAM);
-
-	pr_info("Determined physical RAM map:\n");
-	print_memory_map();
-
 #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 #else
@@ -872,6 +853,26 @@ static void __init arch_mem_init(char **cmdline_p)
 	}
 #endif
 #endif
+
+	/* call board setup routine */
+	plat_mem_setup();
+
+	/*
+	 * Make sure all kernel memory is in the maps.  The "UP" and
+	 * "DOWN" are opposite for initdata since if it crosses over
+	 * into another memory section you don't want that to be
+	 * freed when the initdata is freed.
+	 */
+	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
+			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
+			 BOOT_MEM_RAM);
+	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
+			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
+			 BOOT_MEM_INIT_RAM);
+
+	pr_info("Determined physical RAM map:\n");
+	print_memory_map();
+
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
 	*cmdline_p = command_line;
-- 
2.11.0

[PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code

[Paul Cercueil]

From: Paul Burton <paul.burton@imgtec.com>

jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
arcs_cmdline, up to argc (in fw_arg0). The common code in
fw_init_cmdline will do the exact same thing when run on a system where
fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
use it). Remove the custom implementation & use the generic code.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
---
 arch/mips/jz4740/prom.c | 24 ++----------------------
 1 file changed, 2 insertions(+), 22 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change

diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 47e857194ce6..a62dd8e6ecf9 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -20,33 +20,13 @@
 #include <linux/serial_reg.h>
 
 #include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
 #include <asm/mach-jz4740/base.h>
 
-static __init void jz4740_init_cmdline(int argc, char *argv[])
-{
-	unsigned int count = COMMAND_LINE_SIZE - 1;
-	int i;
-	char *dst = &(arcs_cmdline[0]);
-	char *src;
-
-	for (i = 1; i < argc && count; ++i) {
-		src = argv[i];
-		while (*src && count) {
-			*dst++ = *src++;
-			--count;
-		}
-		*dst++ = ' ';
-	}
-	if (i > 1)
-		--dst;
-
-	*dst = 0;
-}
-
 void __init prom_init(void)
 {
-	jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
 	mips_machtype = MACH_INGENIC_JZ4740;
+	fw_init_cmdline();
 }
 
 void __init prom_free_prom_memory(void)
-- 
2.11.0

[PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs

[Paul Cercueil]

Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
newly supported JZ4770 SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/include/asm/bootinfo.h | 2 ++
 1 file changed, 2 insertions(+)

 v2: No change
 v3: No change
 v5: No change

diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index e26a093bb17a..a301a8f4bc66 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -79,6 +79,8 @@ enum loongson_machine_type {
  */
 #define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
 #define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
+#define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
+#define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
 
 extern char *system_type;
 const char *get_system_type(void);
-- 
2.11.0

[PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards

[Paul Cercueil]

This makes sure that 'mips_machtype' will be initialized to the SoC
version used on the board.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/Kconfig         |  1 +
 arch/mips/jz4740/Makefile |  2 +-
 arch/mips/jz4740/boards.c | 12 ++++++++++++
 arch/mips/jz4740/setup.c  | 34 +++++++++++++++++++++++++++++-----
 4 files changed, 43 insertions(+), 6 deletions(-)
 create mode 100644 arch/mips/jz4740/boards.c

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 350a990fc719..83243e427e36 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -376,6 +376,7 @@ config MACH_INGENIC
 	select BUILTIN_DTB
 	select USE_OF
 	select LIBFDT
+	select MIPS_MACHINE
 
 config LANTIQ
 	bool "Lantiq based platforms"
diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 88d6aa7d000b..fc2d3b3c4a80 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -6,7 +6,7 @@
 # Object file lists.
 
 obj-y += prom.o time.o reset.o setup.o \
-	platform.o timer.o
+	platform.o timer.o boards.o
 
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 
diff --git a/arch/mips/jz4740/boards.c b/arch/mips/jz4740/boards.c
new file mode 100644
index 000000000000..13b0bddd8cb7
--- /dev/null
+++ b/arch/mips/jz4740/boards.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Ingenic boards support
+ * Copyright 2017, Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <asm/bootinfo.h>
+#include <asm/mips_machine.h>
+
+MIPS_MACHINE(MACH_INGENIC_JZ4740, "qi,lb60", "Qi Hardware Ben Nanonote", NULL);
+MIPS_MACHINE(MACH_INGENIC_JZ4780, "img,ci20",
+			"Imagination Technologies CI20", NULL);
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 6d0152321819..afd84ee966e8 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -22,6 +22,7 @@
 #include <linux/of_fdt.h>
 
 #include <asm/bootinfo.h>
+#include <asm/mips_machine.h>
 #include <asm/prom.h>
 
 #include <asm/mach-jz4740/base.h>
@@ -53,16 +54,34 @@ static void __init jz4740_detect_mem(void)
 	add_memory_region(0, size, BOOT_MEM_RAM);
 }
 
+static unsigned long __init get_board_mach_type(const void *fdt)
+{
+	const struct mips_machine *mach;
+
+	for (mach = (struct mips_machine *)&__mips_machines_start;
+			mach < (struct mips_machine *)&__mips_machines_end;
+			mach++) {
+		if (!fdt_node_check_compatible(fdt, 0, mach->mach_id))
+			return mach->mach_type;
+	}
+
+	return MACH_INGENIC_JZ4740;
+}
+
 void __init plat_mem_setup(void)
 {
 	int offset;
 
+	if (!early_init_dt_scan(__dtb_start))
+		return;
+
 	jz4740_reset_init();
-	__dt_setup_arch(__dtb_start);
 
 	offset = fdt_path_offset(__dtb_start, "/memory");
 	if (offset < 0)
 		jz4740_detect_mem();
+
+	mips_machtype = get_board_mach_type(__dtb_start);
 }
 
 void __init device_tree_init(void)
@@ -75,13 +94,18 @@ void __init device_tree_init(void)
 
 const char *get_system_type(void)
 {
-	if (IS_ENABLED(CONFIG_MACH_JZ4780))
-		return "JZ4780";
-
-	return "JZ4740";
+	return mips_get_machine_name();
 }
 
 void __init arch_init_irq(void)
 {
 	irqchip_init();
 }
+
+static int __init jz4740_machine_setup(void)
+{
+	mips_machine_setup();
+
+	return 0;
+}
+arch_initcall(jz4740_machine_setup);
-- 
2.11.0

[PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support

[Paul Cercueil]

Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
 arch/mips/jz4740/Kconfig               |   6 +
 arch/mips/jz4740/time.c                |   2 +-
 3 files changed, 219 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier

diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
new file mode 100644
index 000000000000..7c2804f3f5f1
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4770";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4770-intc";
+		reg = <0x10001000 0x40>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4770-cgu@10000000 {
+		compatible = "ingenic,jz4770-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&osc32k>;
+		clock-names = "ext", "osc32k";
+
+		#clock-cells = <1>;
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4770-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpe: gpio@4 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <4>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		gpf: gpio@5 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <5>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 160 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10030000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <5>;
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10031000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <4>;
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10032000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	uart3: serial@10033000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10033000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <2>;
+
+		status = "disabled";
+	};
+
+	uhc: uhc@13430000 {
+		compatible = "generic-ohci";
+		reg = <0x13430000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+		assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+		assigned-clock-rates = <48000000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <20>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 643af2012e14..29a9361a2b77 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -18,6 +18,12 @@ config MACH_JZ4740
 	bool
 	select SYS_HAS_CPU_MIPS32_R1
 
+config MACH_JZ4770
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM
+
 config MACH_JZ4780
 	bool
 	select MIPS_CPU_SCACHE
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index bb1ad5119da4..2ca9160f642a 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
 #ifdef CONFIG_MACH_JZ4740
 	.irq = JZ4740_IRQ_TCU0,
 #endif
-#ifdef CONFIG_MACH_JZ4780
+#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
 	.irq = JZ4780_IRQ_TCU2,
 #endif
 };
-- 
2.11.0

[PATCH v5 12/15] MIPS: JZ4770: Work around config2 misreporting associativity

[Paul Cercueil]

From: Maarten ter Huurne <maarten@treewalker.org>

According to config2, the associativity would be 5-ways, but the
documentation states 4-ways, which also matches the documented
L2 cache size of 256 kB.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
---
 arch/mips/mm/sc-mips.c | 9 +++++++++
 1 file changed, 9 insertions(+)

 v2: No change
 v3: No change
 v4: Rebased on top of Linux 4.15-rc5
 v5: No change

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 548acb7f8557..394673991bab 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -16,6 +16,7 @@
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
 #include <asm/mips-cps.h>
+#include <asm/bootinfo.h>
 
 /*
  * MIPS32/MIPS64 L2 cache handling
@@ -220,6 +221,14 @@ static inline int __init mips_sc_probe(void)
 	else
 		return 0;
 
+	/*
+	 * According to config2 it would be 5-ways, but that is contradicted
+	 * by all documentation.
+	 */
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770)
+		c->scache.ways = 4;
+
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-- 
2.11.0

[PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[Paul Cercueil]

From: Maarten ter Huurne <maarten@treewalker.org>

We have seen MMC DMA transfers read corrupted data from SDRAM when
a burst interval ends at physical address 0x10000000. To avoid this
problem, we remove the final page of low memory from the memory map.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
---
 arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
 arch/mips/kernel/setup.c |  8 ++++++++
 2 files changed, 32 insertions(+)

 v2: No change
 v3: No change
 v4: No change
 v5: No change

diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index afd84ee966e8..6948b133a15d 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -23,6 +23,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/mips_machine.h>
+#include <asm/page.h>
 #include <asm/prom.h>
 
 #include <asm/mach-jz4740/base.h>
@@ -102,6 +103,29 @@ void __init arch_init_irq(void)
 	irqchip_init();
 }
 
+/*
+ * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
+ * interval ends at physical address 0x10000000. To avoid this problem, we
+ * remove the final page of low memory from the memory map.
+ */
+void __init jz4770_reserve_unsafe_for_dma(void)
+{
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+
+		if (entry->type != BOOT_MEM_RAM)
+			continue;
+
+		if (entry->addr + entry->size != 0x10000000)
+			continue;
+
+		entry->size -= PAGE_SIZE;
+		break;
+	}
+}
+
 static int __init jz4740_machine_setup(void)
 {
 	mips_machine_setup();
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 85bc601e9a0d..5a2c20145aee 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	parse_early_param();
 
+#ifdef CONFIG_MACH_JZ4770
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770) {
+		extern void __init jz4770_reserve_unsafe_for_dma(void);
+		jz4770_reserve_unsafe_for_dma();
+	}
+#endif
+
 	if (usermem) {
 		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
-- 
2.11.0

[PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[Paul Cercueil]

From: Maarten ter Huurne <maarten-Ph2Y2OKCxY1M656bX5wj8A@public.gmane.org>

We have seen MMC DMA transfers read corrupted data from SDRAM when
a burst interval ends at physical address 0x10000000. To avoid this
problem, we remove the final page of low memory from the memory map.

Signed-off-by: Maarten ter Huurne <maarten-Ph2Y2OKCxY1M656bX5wj8A@public.gmane.org>
---
 arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
 arch/mips/kernel/setup.c |  8 ++++++++
 2 files changed, 32 insertions(+)

 v2: No change
 v3: No change
 v4: No change
 v5: No change

diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index afd84ee966e8..6948b133a15d 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -23,6 +23,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/mips_machine.h>
+#include <asm/page.h>
 #include <asm/prom.h>
 
 #include <asm/mach-jz4740/base.h>
@@ -102,6 +103,29 @@ void __init arch_init_irq(void)
 	irqchip_init();
 }
 
+/*
+ * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
+ * interval ends at physical address 0x10000000. To avoid this problem, we
+ * remove the final page of low memory from the memory map.
+ */
+void __init jz4770_reserve_unsafe_for_dma(void)
+{
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+
+		if (entry->type != BOOT_MEM_RAM)
+			continue;
+
+		if (entry->addr + entry->size != 0x10000000)
+			continue;
+
+		entry->size -= PAGE_SIZE;
+		break;
+	}
+}
+
 static int __init jz4740_machine_setup(void)
 {
 	mips_machine_setup();
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 85bc601e9a0d..5a2c20145aee 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	parse_early_param();
 
+#ifdef CONFIG_MACH_JZ4770
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770) {
+		extern void __init jz4770_reserve_unsafe_for_dma(void);
+		jz4770_reserve_unsafe_for_dma();
+	}
+#endif
+
 	if (usermem) {
 		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 14/15] devicetree/bindings: Add GCW vendor prefix

[Paul Cercueil]

Game Consoles Worldwide, mostly known under the acronym GCW, is the
creator of the GCW Zero open-source video game system.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

 v2: It's 'Game Consoles Worldwide', not 'Games Consoles Worldwide'
 v3: No change
 v4: No change
 v5: No change

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0994bdd82cd3..f40f4da39937 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -123,6 +123,7 @@ focaltech	FocalTech Systems Co.,Ltd
 friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
 fsl	Freescale Semiconductor
 fujitsu	Fujitsu Ltd.
+gcw Game Consoles Worldwide
 ge	General Electric Company
 geekbuying	GeekBuying
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
-- 
2.11.0

[PATCH v5 15/15] MIPS: ingenic: Initial GCW Zero support

[Paul Cercueil]

The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
handheld game console, successfully kickstarted in ~2012, running Linux.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/boot/dts/ingenic/Makefile |  1 +
 arch/mips/boot/dts/ingenic/gcw0.dts | 61 +++++++++++++++++++++++++++++++++++++
 arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
 arch/mips/jz4740/Kconfig            |  4 +++
 arch/mips/jz4740/boards.c           |  1 +
 5 files changed, 94 insertions(+)
 create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
 create mode 100644 arch/mips/configs/gcw0_defconfig

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
     Drop custom CROSS_COMPILE from defconfig

diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 6a31759839b4..5b1361a89e02 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
+dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
new file mode 100644
index 000000000000..4dc72de387db
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4770.dtsi"
+
+/ {
+	compatible = "gcw,zero", "ingenic,jz4770";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial2:57600n8";
+	};
+
+	board {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <>;
+
+		otg_phy: otg-phy {
+			compatible = "usb-nop-xceiv";
+			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&cgu {
+	/* Put high-speed peripherals under PLL1, such that we can change the
+	 * PLL0 frequency on demand without having to suspend peripherals.
+	 * We use a rate of 432 MHz, which is the least common multiple of
+	 * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+	 */
+	assigned-clocks =
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_UHC>;
+	assigned-clock-parents =
+		<0>,
+		<&cgu JZ4770_CLK_PLL1>;
+	assigned-clock-rates =
+		<432000000>;
+};
+
+&uhc {
+	/* The WiFi module is connected to the UHC. */
+	status = "okay";
+};
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
new file mode 100644
index 000000000000..99ac1fa3b35f
--- /dev/null
+++ b/arch/mips/configs/gcw0_defconfig
@@ -0,0 +1,27 @@
+CONFIG_MACH_INGENIC=y
+CONFIG_JZ4770_GCW0=y
+CONFIG_HIGHMEM=y
+# CONFIG_BOUNCE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_SECCOMP is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_EMBEDDED=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_TMPFS=y
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 29a9361a2b77..4dd0c446ecec 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -8,6 +8,10 @@ config JZ4740_QI_LB60
 	bool "Qi Hardware Ben NanoNote"
 	select MACH_JZ4740
 
+config JZ4770_GCW0
+	bool "Game Consoles Worldwide GCW Zero"
+	select MACH_JZ4770
+
 config JZ4780_CI20
 	bool "MIPS Creator CI20"
 	select MACH_JZ4780
diff --git a/arch/mips/jz4740/boards.c b/arch/mips/jz4740/boards.c
index 13b0bddd8cb7..1389d6eec80f 100644
--- a/arch/mips/jz4740/boards.c
+++ b/arch/mips/jz4740/boards.c
@@ -8,5 +8,6 @@
 #include <asm/mips_machine.h>
 
 MIPS_MACHINE(MACH_INGENIC_JZ4740, "qi,lb60", "Qi Hardware Ben Nanonote", NULL);
+MIPS_MACHINE(MACH_INGENIC_JZ4770, "gcw,zero", "GCW Zero", NULL);
 MIPS_MACHINE(MACH_INGENIC_JZ4780, "img,ci20",
 			"Imagination Technologies CI20", NULL);
-- 
2.11.0

Re: [PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code

[PrasannaKumar Muralidharan]

Hi Paul,

On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net> wrote:
> From: Paul Burton <paul.burton@imgtec.com>
>
> jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
> arcs_cmdline, up to argc (in fw_arg0). The common code in
> fw_init_cmdline will do the exact same thing when run on a system where
> fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
> use it). Remove the custom implementation & use the generic code.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
>  arch/mips/jz4740/prom.c | 24 ++----------------------
>  1 file changed, 2 insertions(+), 22 deletions(-)
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index 47e857194ce6..a62dd8e6ecf9 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -20,33 +20,13 @@
>  #include <linux/serial_reg.h>
>
>  #include <asm/bootinfo.h>
> +#include <asm/fw/fw.h>
>  #include <asm/mach-jz4740/base.h>
>
> -static __init void jz4740_init_cmdline(int argc, char *argv[])
> -{
> -       unsigned int count = COMMAND_LINE_SIZE - 1;
> -       int i;
> -       char *dst = &(arcs_cmdline[0]);
> -       char *src;
> -
> -       for (i = 1; i < argc && count; ++i) {
> -               src = argv[i];
> -               while (*src && count) {
> -                       *dst++ = *src++;
> -                       --count;
> -               }
> -               *dst++ = ' ';
> -       }
> -       if (i > 1)
> -               --dst;
> -
> -       *dst = 0;
> -}
> -
>  void __init prom_init(void)
>  {
> -       jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
>         mips_machtype = MACH_INGENIC_JZ4740;
> +       fw_init_cmdline();
>  }
>
>  void __init prom_free_prom_memory(void)
> --
> 2.11.0
>
>

Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Re: [PATCH v5 08/15] MIPS: ingenic: Use common cmdline handling code

[PrasannaKumar Muralidharan]

Hi Paul,

On 2 January 2018 at 20:38, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> From: Paul Burton <paul.burton-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
>
> jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
> arcs_cmdline, up to argc (in fw_arg0). The common code in
> fw_init_cmdline will do the exact same thing when run on a system where
> fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
> use it). Remove the custom implementation & use the generic code.
>
> Signed-off-by: Paul Burton <paul.burton-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
> ---
>  arch/mips/jz4740/prom.c | 24 ++----------------------
>  1 file changed, 2 insertions(+), 22 deletions(-)
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index 47e857194ce6..a62dd8e6ecf9 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -20,33 +20,13 @@
>  #include <linux/serial_reg.h>
>
>  #include <asm/bootinfo.h>
> +#include <asm/fw/fw.h>
>  #include <asm/mach-jz4740/base.h>
>
> -static __init void jz4740_init_cmdline(int argc, char *argv[])
> -{
> -       unsigned int count = COMMAND_LINE_SIZE - 1;
> -       int i;
> -       char *dst = &(arcs_cmdline[0]);
> -       char *src;
> -
> -       for (i = 1; i < argc && count; ++i) {
> -               src = argv[i];
> -               while (*src && count) {
> -                       *dst++ = *src++;
> -                       --count;
> -               }
> -               *dst++ = ' ';
> -       }
> -       if (i > 1)
> -               --dst;
> -
> -       *dst = 0;
> -}
> -
>  void __init prom_init(void)
>  {
> -       jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
>         mips_machtype = MACH_INGENIC_JZ4740;
> +       fw_init_cmdline();
>  }
>
>  void __init prom_free_prom_memory(void)
> --
> 2.11.0
>
>

Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs

[PrasannaKumar Muralidharan]

On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net> wrote:
> Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
> newly supported JZ4770 SoC.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/include/asm/bootinfo.h | 2 ++
>  1 file changed, 2 insertions(+)
>
>  v2: No change
>  v3: No change
>  v5: No change
>
> diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
> index e26a093bb17a..a301a8f4bc66 100644
> --- a/arch/mips/include/asm/bootinfo.h
> +++ b/arch/mips/include/asm/bootinfo.h
> @@ -79,6 +79,8 @@ enum loongson_machine_type {
>   */
>  #define  MACH_INGENIC_JZ4730   0       /* JZ4730 SOC           */
>  #define  MACH_INGENIC_JZ4740   1       /* JZ4740 SOC           */
> +#define  MACH_INGENIC_JZ4770   2       /* JZ4770 SOC           */
> +#define  MACH_INGENIC_JZ4780   3       /* JZ4780 SOC           */
>
>  extern char *system_type;
>  const char *get_system_type(void);
> --
> 2.11.0
>
>

Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Re: [PATCH v5 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs

[PrasannaKumar Muralidharan]

On 2 January 2018 at 20:38, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
> newly supported JZ4770 SoC.
>
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  arch/mips/include/asm/bootinfo.h | 2 ++
>  1 file changed, 2 insertions(+)
>
>  v2: No change
>  v3: No change
>  v5: No change
>
> diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
> index e26a093bb17a..a301a8f4bc66 100644
> --- a/arch/mips/include/asm/bootinfo.h
> +++ b/arch/mips/include/asm/bootinfo.h
> @@ -79,6 +79,8 @@ enum loongson_machine_type {
>   */
>  #define  MACH_INGENIC_JZ4730   0       /* JZ4730 SOC           */
>  #define  MACH_INGENIC_JZ4740   1       /* JZ4740 SOC           */
> +#define  MACH_INGENIC_JZ4770   2       /* JZ4770 SOC           */
> +#define  MACH_INGENIC_JZ4780   3       /* JZ4780 SOC           */
>
>  extern char *system_type;
>  const char *get_system_type(void);
> --
> 2.11.0
>
>

Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards

[PrasannaKumar Muralidharan]

Hi Paul,

On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net> wrote:
> This makes sure that 'mips_machtype' will be initialized to the SoC
> version used on the board.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/Kconfig         |  1 +
>  arch/mips/jz4740/Makefile |  2 +-
>  arch/mips/jz4740/boards.c | 12 ++++++++++++
>  arch/mips/jz4740/setup.c  | 34 +++++++++++++++++++++++++++++-----
>  4 files changed, 43 insertions(+), 6 deletions(-)
>  create mode 100644 arch/mips/jz4740/boards.c
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 350a990fc719..83243e427e36 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -376,6 +376,7 @@ config MACH_INGENIC
>         select BUILTIN_DTB
>         select USE_OF
>         select LIBFDT
> +       select MIPS_MACHINE
>
>  config LANTIQ
>         bool "Lantiq based platforms"
> diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
> index 88d6aa7d000b..fc2d3b3c4a80 100644
> --- a/arch/mips/jz4740/Makefile
> +++ b/arch/mips/jz4740/Makefile
> @@ -6,7 +6,7 @@
>  # Object file lists.
>
>  obj-y += prom.o time.o reset.o setup.o \
> -       platform.o timer.o
> +       platform.o timer.o boards.o
>
>  CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
>
> diff --git a/arch/mips/jz4740/boards.c b/arch/mips/jz4740/boards.c
> new file mode 100644
> index 000000000000..13b0bddd8cb7
> --- /dev/null
> +++ b/arch/mips/jz4740/boards.c
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Ingenic boards support
> + * Copyright 2017, Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <asm/bootinfo.h>
> +#include <asm/mips_machine.h>
> +
> +MIPS_MACHINE(MACH_INGENIC_JZ4740, "qi,lb60", "Qi Hardware Ben Nanonote", NULL);
> +MIPS_MACHINE(MACH_INGENIC_JZ4780, "img,ci20",
> +                       "Imagination Technologies CI20", NULL);
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index 6d0152321819..afd84ee966e8 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -22,6 +22,7 @@
>  #include <linux/of_fdt.h>
>
>  #include <asm/bootinfo.h>
> +#include <asm/mips_machine.h>
>  #include <asm/prom.h>
>
>  #include <asm/mach-jz4740/base.h>
> @@ -53,16 +54,34 @@ static void __init jz4740_detect_mem(void)
>         add_memory_region(0, size, BOOT_MEM_RAM);
>  }
>
> +static unsigned long __init get_board_mach_type(const void *fdt)
> +{
> +       const struct mips_machine *mach;
> +
> +       for (mach = (struct mips_machine *)&__mips_machines_start;
> +                       mach < (struct mips_machine *)&__mips_machines_end;
> +                       mach++) {
> +               if (!fdt_node_check_compatible(fdt, 0, mach->mach_id))
> +                       return mach->mach_type;
> +       }
> +
> +       return MACH_INGENIC_JZ4740;
> +}
> +
>  void __init plat_mem_setup(void)
>  {
>         int offset;
>
> +       if (!early_init_dt_scan(__dtb_start))
> +               return;
> +
>         jz4740_reset_init();
> -       __dt_setup_arch(__dtb_start);
>
>         offset = fdt_path_offset(__dtb_start, "/memory");
>         if (offset < 0)
>                 jz4740_detect_mem();
> +
> +       mips_machtype = get_board_mach_type(__dtb_start);
>  }
>
>  void __init device_tree_init(void)
> @@ -75,13 +94,18 @@ void __init device_tree_init(void)
>
>  const char *get_system_type(void)
>  {
> -       if (IS_ENABLED(CONFIG_MACH_JZ4780))
> -               return "JZ4780";
> -
> -       return "JZ4740";
> +       return mips_get_machine_name();
>  }
>
>  void __init arch_init_irq(void)
>  {
>         irqchip_init();
>  }
> +
> +static int __init jz4740_machine_setup(void)
> +{
> +       mips_machine_setup();
> +
> +       return 0;
> +}
> +arch_initcall(jz4740_machine_setup);
> --
> 2.11.0
>
>

Why add another file in arch/mips/jz4740/? I think declaring a machine
and compatible string in dts would suffice. Please feel free to
correct me if I am wrong.

Regards,
PrasannaKumar

Re: [PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support

[PrasannaKumar Muralidharan]

Hi Paul,

On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net> wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
>  arch/mips/jz4740/Kconfig               |   6 +
>  arch/mips/jz4740/time.c                |   2 +-
>  3 files changed, 219 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> new file mode 100644
> index 000000000000..7c2804f3f5f1
> --- /dev/null
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +
> +/ {
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +       compatible = "ingenic,jz4770";
> +
> +       cpuintc: interrupt-controller {
> +               #address-cells = <0>;
> +               #interrupt-cells = <1>;
> +               interrupt-controller;
> +               compatible = "mti,cpu-interrupt-controller";
> +       };
> +
> +       intc: interrupt-controller@10001000 {
> +               compatible = "ingenic,jz4770-intc";
> +               reg = <0x10001000 0x40>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <1>;
> +
> +               interrupt-parent = <&cpuintc>;
> +               interrupts = <2>;
> +       };
> +
> +       ext: ext {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +       };
> +
> +       osc32k: osc32k {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <32768>;
> +       };
> +
> +       cgu: jz4770-cgu@10000000 {
> +               compatible = "ingenic,jz4770-cgu";
> +               reg = <0x10000000 0x100>;
> +
> +               clocks = <&ext>, <&osc32k>;
> +               clock-names = "ext", "osc32k";
> +
> +               #clock-cells = <1>;
> +       };
> +
> +       pinctrl: pin-controller@10010000 {
> +               compatible = "ingenic,jz4770-pinctrl";
> +               reg = <0x10010000 0x600>;
> +
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               gpa: gpio@0 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <0>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 0 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <17>;
> +               };
> +
> +               gpb: gpio@1 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <1>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 32 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <16>;
> +               };
> +
> +               gpc: gpio@2 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <2>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 64 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <15>;
> +               };
> +
> +               gpd: gpio@3 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <3>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 96 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <14>;
> +               };
> +
> +               gpe: gpio@4 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <4>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 128 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <13>;
> +               };
> +
> +               gpf: gpio@5 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <5>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 160 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <12>;
> +               };
> +       };
> +
> +       uart0: serial@10030000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10030000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <5>;
> +
> +               status = "disabled";
> +       };
> +
> +       uart1: serial@10031000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10031000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <4>;
> +
> +               status = "disabled";
> +       };
> +
> +       uart2: serial@10032000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10032000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <3>;
> +
> +               status = "disabled";
> +       };
> +
> +       uart3: serial@10033000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10033000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <2>;
> +
> +               status = "disabled";
> +       };
> +
> +       uhc: uhc@13430000 {
> +               compatible = "generic-ohci";
> +               reg = <0x13430000 0x1000>;
> +
> +               clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
> +               assigned-clocks = <&cgu JZ4770_CLK_UHC>;
> +               assigned-clock-rates = <48000000>;
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <20>;
> +
> +               status = "disabled";
> +       };
> +};
> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
> index 643af2012e14..29a9361a2b77 100644
> --- a/arch/mips/jz4740/Kconfig
> +++ b/arch/mips/jz4740/Kconfig
> @@ -18,6 +18,12 @@ config MACH_JZ4740
>         bool
>         select SYS_HAS_CPU_MIPS32_R1
>
> +config MACH_JZ4770
> +       bool
> +       select MIPS_CPU_SCACHE
> +       select SYS_HAS_CPU_MIPS32_R2
> +       select SYS_SUPPORTS_HIGHMEM
> +
>  config MACH_JZ4780
>         bool
>         select MIPS_CPU_SCACHE
> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
>  #ifdef CONFIG_MACH_JZ4740
>         .irq = JZ4740_IRQ_TCU0,
>  #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>         .irq = JZ4780_IRQ_TCU2,
>  #endif
>  };
> --
> 2.11.0
>
>

Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Re: [PATCH v5 11/15] MIPS: ingenic: Initial JZ4770 support

[PrasannaKumar Muralidharan]

Hi Paul,

On 2 January 2018 at 20:38, Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
>
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> ---
>  arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
>  arch/mips/jz4740/Kconfig               |   6 +
>  arch/mips/jz4740/time.c                |   2 +-
>  3 files changed, 219 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> new file mode 100644
> index 000000000000..7c2804f3f5f1
> --- /dev/null
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +
> +/ {
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +       compatible = "ingenic,jz4770";
> +
> +       cpuintc: interrupt-controller {
> +               #address-cells = <0>;
> +               #interrupt-cells = <1>;
> +               interrupt-controller;
> +               compatible = "mti,cpu-interrupt-controller";
> +       };
> +
> +       intc: interrupt-controller@10001000 {
> +               compatible = "ingenic,jz4770-intc";
> +               reg = <0x10001000 0x40>;
> +
> +               interrupt-controller;
> +               #interrupt-cells = <1>;
> +
> +               interrupt-parent = <&cpuintc>;
> +               interrupts = <2>;
> +       };
> +
> +       ext: ext {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +       };
> +
> +       osc32k: osc32k {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <32768>;
> +       };
> +
> +       cgu: jz4770-cgu@10000000 {
> +               compatible = "ingenic,jz4770-cgu";
> +               reg = <0x10000000 0x100>;
> +
> +               clocks = <&ext>, <&osc32k>;
> +               clock-names = "ext", "osc32k";
> +
> +               #clock-cells = <1>;
> +       };
> +
> +       pinctrl: pin-controller@10010000 {
> +               compatible = "ingenic,jz4770-pinctrl";
> +               reg = <0x10010000 0x600>;
> +
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               gpa: gpio@0 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <0>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 0 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <17>;
> +               };
> +
> +               gpb: gpio@1 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <1>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 32 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <16>;
> +               };
> +
> +               gpc: gpio@2 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <2>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 64 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <15>;
> +               };
> +
> +               gpd: gpio@3 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <3>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 96 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <14>;
> +               };
> +
> +               gpe: gpio@4 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <4>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 128 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <13>;
> +               };
> +
> +               gpf: gpio@5 {
> +                       compatible = "ingenic,jz4770-gpio";
> +                       reg = <5>;
> +
> +                       gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 160 32>;
> +                       #gpio-cells = <2>;
> +
> +                       interrupt-controller;
> +                       #interrupt-cells = <2>;
> +
> +                       interrupt-parent = <&intc>;
> +                       interrupts = <12>;
> +               };
> +       };
> +
> +       uart0: serial@10030000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10030000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <5>;
> +
> +               status = "disabled";
> +       };
> +
> +       uart1: serial@10031000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10031000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <4>;
> +
> +               status = "disabled";
> +       };
> +
> +       uart2: serial@10032000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10032000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <3>;
> +
> +               status = "disabled";
> +       };
> +
> +       uart3: serial@10033000 {
> +               compatible = "ingenic,jz4770-uart";
> +               reg = <0x10033000 0x100>;
> +
> +               clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
> +               clock-names = "baud", "module";
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <2>;
> +
> +               status = "disabled";
> +       };
> +
> +       uhc: uhc@13430000 {
> +               compatible = "generic-ohci";
> +               reg = <0x13430000 0x1000>;
> +
> +               clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
> +               assigned-clocks = <&cgu JZ4770_CLK_UHC>;
> +               assigned-clock-rates = <48000000>;
> +
> +               interrupt-parent = <&intc>;
> +               interrupts = <20>;
> +
> +               status = "disabled";
> +       };
> +};
> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
> index 643af2012e14..29a9361a2b77 100644
> --- a/arch/mips/jz4740/Kconfig
> +++ b/arch/mips/jz4740/Kconfig
> @@ -18,6 +18,12 @@ config MACH_JZ4740
>         bool
>         select SYS_HAS_CPU_MIPS32_R1
>
> +config MACH_JZ4770
> +       bool
> +       select MIPS_CPU_SCACHE
> +       select SYS_HAS_CPU_MIPS32_R2
> +       select SYS_SUPPORTS_HIGHMEM
> +
>  config MACH_JZ4780
>         bool
>         select MIPS_CPU_SCACHE
> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
>  #ifdef CONFIG_MACH_JZ4740
>         .irq = JZ4740_IRQ_TCU0,
>  #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>         .irq = JZ4780_IRQ_TCU2,
>  #endif
>  };
> --
> 2.11.0
>
>

Looks good to me.
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards

[Paul Cercueil]

Hi PrasannaKumar,

Le mar. 2 janv. 2018 à 17:02, PrasannaKumar Muralidharan 
<prasannatsmkumar@gmail.com> a écrit :
> Hi Paul,
> 
> On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net> 
> wrote:
>>  This makes sure that 'mips_machtype' will be initialized to the SoC
>>  version used on the board.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  ---
>>   arch/mips/Kconfig         |  1 +
>>   arch/mips/jz4740/Makefile |  2 +-
>>   arch/mips/jz4740/boards.c | 12 ++++++++++++
>>   arch/mips/jz4740/setup.c  | 34 +++++++++++++++++++++++++++++-----
>>   4 files changed, 43 insertions(+), 6 deletions(-)
>>   create mode 100644 arch/mips/jz4740/boards.c
>> 
>>   v2: No change
>>   v3: No change
>>   v4: No change
>>   v5: Use SPDX license identifier
>> 
>>  diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>>  index 350a990fc719..83243e427e36 100644
>>  --- a/arch/mips/Kconfig
>>  +++ b/arch/mips/Kconfig
>>  @@ -376,6 +376,7 @@ config MACH_INGENIC
>>          select BUILTIN_DTB
>>          select USE_OF
>>          select LIBFDT
>>  +       select MIPS_MACHINE
>> 
>>   config LANTIQ
>>          bool "Lantiq based platforms"
>>  diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
>>  index 88d6aa7d000b..fc2d3b3c4a80 100644
>>  --- a/arch/mips/jz4740/Makefile
>>  +++ b/arch/mips/jz4740/Makefile
>>  @@ -6,7 +6,7 @@
>>   # Object file lists.
>> 
>>   obj-y += prom.o time.o reset.o setup.o \
>>  -       platform.o timer.o
>>  +       platform.o timer.o boards.o
>> 
>>   CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
>> 
>>  diff --git a/arch/mips/jz4740/boards.c b/arch/mips/jz4740/boards.c
>>  new file mode 100644
>>  index 000000000000..13b0bddd8cb7
>>  --- /dev/null
>>  +++ b/arch/mips/jz4740/boards.c
>>  @@ -0,0 +1,12 @@
>>  +// SPDX-License-Identifier: GPL-2.0
>>  +/*
>>  + * Ingenic boards support
>>  + * Copyright 2017, Paul Cercueil <paul@crapouillou.net>
>>  + */
>>  +
>>  +#include <asm/bootinfo.h>
>>  +#include <asm/mips_machine.h>
>>  +
>>  +MIPS_MACHINE(MACH_INGENIC_JZ4740, "qi,lb60", "Qi Hardware Ben 
>> Nanonote", NULL);
>>  +MIPS_MACHINE(MACH_INGENIC_JZ4780, "img,ci20",
>>  +                       "Imagination Technologies CI20", NULL);
>>  diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
>>  index 6d0152321819..afd84ee966e8 100644
>>  --- a/arch/mips/jz4740/setup.c
>>  +++ b/arch/mips/jz4740/setup.c
>>  @@ -22,6 +22,7 @@
>>   #include <linux/of_fdt.h>
>> 
>>   #include <asm/bootinfo.h>
>>  +#include <asm/mips_machine.h>
>>   #include <asm/prom.h>
>> 
>>   #include <asm/mach-jz4740/base.h>
>>  @@ -53,16 +54,34 @@ static void __init jz4740_detect_mem(void)
>>          add_memory_region(0, size, BOOT_MEM_RAM);
>>   }
>> 
>>  +static unsigned long __init get_board_mach_type(const void *fdt)
>>  +{
>>  +       const struct mips_machine *mach;
>>  +
>>  +       for (mach = (struct mips_machine *)&__mips_machines_start;
>>  +                       mach < (struct mips_machine 
>> *)&__mips_machines_end;
>>  +                       mach++) {
>>  +               if (!fdt_node_check_compatible(fdt, 0, 
>> mach->mach_id))
>>  +                       return mach->mach_type;
>>  +       }
>>  +
>>  +       return MACH_INGENIC_JZ4740;
>>  +}
>>  +
>>   void __init plat_mem_setup(void)
>>   {
>>          int offset;
>> 
>>  +       if (!early_init_dt_scan(__dtb_start))
>>  +               return;
>>  +
>>          jz4740_reset_init();
>>  -       __dt_setup_arch(__dtb_start);
>> 
>>          offset = fdt_path_offset(__dtb_start, "/memory");
>>          if (offset < 0)
>>                  jz4740_detect_mem();
>>  +
>>  +       mips_machtype = get_board_mach_type(__dtb_start);
>>   }
>> 
>>   void __init device_tree_init(void)
>>  @@ -75,13 +94,18 @@ void __init device_tree_init(void)
>> 
>>   const char *get_system_type(void)
>>   {
>>  -       if (IS_ENABLED(CONFIG_MACH_JZ4780))
>>  -               return "JZ4780";
>>  -
>>  -       return "JZ4740";
>>  +       return mips_get_machine_name();
>>   }
>> 
>>   void __init arch_init_irq(void)
>>   {
>>          irqchip_init();
>>   }
>>  +
>>  +static int __init jz4740_machine_setup(void)
>>  +{
>>  +       mips_machine_setup();
>>  +
>>  +       return 0;
>>  +}
>>  +arch_initcall(jz4740_machine_setup);
>>  --
>>  2.11.0
>> 
>> 
> 
> Why add another file in arch/mips/jz4740/? I think declaring a machine
> and compatible string in dts would suffice. Please feel free to
> correct me if I am wrong.
> 
> Regards,
> PrasannaKumar

The point of this commit is, first, to have a textual description of 
the board
that can then be retrieved in dmesg; then, to properly initialize the
mips_machtype early in the boot process. I think you are right and we 
could
have both things just with "model" and "compatible" nodes in devicetree.

Regards,
-Paul

Re: [PATCH v5 10/15] MIPS: ingenic: Add machine info for supported boards

[Paul Cercueil]

Hi PrasannaKumar,

Le mar. 2 janv. 2018 =E0 17:02, PrasannaKumar Muralidharan=20
<prasannatsmkumar@gmail.com> a =E9crit :
> Hi Paul,
>=20
> On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net>=20
> wrote:
>>  This makes sure that 'mips_machtype' will be initialized to the SoC
>>  version used on the board.
>>=20
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  ---
>>   arch/mips/Kconfig         |  1 +
>>   arch/mips/jz4740/Makefile |  2 +-
>>   arch/mips/jz4740/boards.c | 12 ++++++++++++
>>   arch/mips/jz4740/setup.c  | 34 +++++++++++++++++++++++++++++-----
>>   4 files changed, 43 insertions(+), 6 deletions(-)
>>   create mode 100644 arch/mips/jz4740/boards.c
>>=20
>>   v2: No change
>>   v3: No change
>>   v4: No change
>>   v5: Use SPDX license identifier
>>=20
>>  diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
>>  index 350a990fc719..83243e427e36 100644
>>  --- a/arch/mips/Kconfig
>>  +++ b/arch/mips/Kconfig
>>  @@ -376,6 +376,7 @@ config MACH_INGENIC
>>          select BUILTIN_DTB
>>          select USE_OF
>>          select LIBFDT
>>  +       select MIPS_MACHINE
>>=20
>>   config LANTIQ
>>          bool "Lantiq based platforms"
>>  diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
>>  index 88d6aa7d000b..fc2d3b3c4a80 100644
>>  --- a/arch/mips/jz4740/Makefile
>>  +++ b/arch/mips/jz4740/Makefile
>>  @@ -6,7 +6,7 @@
>>   # Object file lists.
>>=20
>>   obj-y +=3D prom.o time.o reset.o setup.o \
>>  -       platform.o timer.o
>>  +       platform.o timer.o boards.o
>>=20
>>   CFLAGS_setup.o =3D -I$(src)/../../../scripts/dtc/libfdt
>>=20
>>  diff --git a/arch/mips/jz4740/boards.c b/arch/mips/jz4740/boards.c
>>  new file mode 100644
>>  index 000000000000..13b0bddd8cb7
>>  --- /dev/null
>>  +++ b/arch/mips/jz4740/boards.c
>>  @@ -0,0 +1,12 @@
>>  +// SPDX-License-Identifier: GPL-2.0
>>  +/*
>>  + * Ingenic boards support
>>  + * Copyright 2017, Paul Cercueil <paul@crapouillou.net>
>>  + */
>>  +
>>  +#include <asm/bootinfo.h>
>>  +#include <asm/mips_machine.h>
>>  +
>>  +MIPS_MACHINE(MACH_INGENIC_JZ4740, "qi,lb60", "Qi Hardware Ben=20
>> Nanonote", NULL);
>>  +MIPS_MACHINE(MACH_INGENIC_JZ4780, "img,ci20",
>>  +                       "Imagination Technologies CI20", NULL);
>>  diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
>>  index 6d0152321819..afd84ee966e8 100644
>>  --- a/arch/mips/jz4740/setup.c
>>  +++ b/arch/mips/jz4740/setup.c
>>  @@ -22,6 +22,7 @@
>>   #include <linux/of_fdt.h>
>>=20
>>   #include <asm/bootinfo.h>
>>  +#include <asm/mips_machine.h>
>>   #include <asm/prom.h>
>>=20
>>   #include <asm/mach-jz4740/base.h>
>>  @@ -53,16 +54,34 @@ static void __init jz4740_detect_mem(void)
>>          add_memory_region(0, size, BOOT_MEM_RAM);
>>   }
>>=20
>>  +static unsigned long __init get_board_mach_type(const void *fdt)
>>  +{
>>  +       const struct mips_machine *mach;
>>  +
>>  +       for (mach =3D (struct mips_machine *)&__mips_machines_start;
>>  +                       mach < (struct mips_machine=20
>> *)&__mips_machines_end;
>>  +                       mach++) {
>>  +               if (!fdt_node_check_compatible(fdt, 0,=20
>> mach->mach_id))
>>  +                       return mach->mach_type;
>>  +       }
>>  +
>>  +       return MACH_INGENIC_JZ4740;
>>  +}
>>  +
>>   void __init plat_mem_setup(void)
>>   {
>>          int offset;
>>=20
>>  +       if (!early_init_dt_scan(__dtb_start))
>>  +               return;
>>  +
>>          jz4740_reset_init();
>>  -       __dt_setup_arch(__dtb_start);
>>=20
>>          offset =3D fdt_path_offset(__dtb_start, "/memory");
>>          if (offset < 0)
>>                  jz4740_detect_mem();
>>  +
>>  +       mips_machtype =3D get_board_mach_type(__dtb_start);
>>   }
>>=20
>>   void __init device_tree_init(void)
>>  @@ -75,13 +94,18 @@ void __init device_tree_init(void)
>>=20
>>   const char *get_system_type(void)
>>   {
>>  -       if (IS_ENABLED(CONFIG_MACH_JZ4780))
>>  -               return "JZ4780";
>>  -
>>  -       return "JZ4740";
>>  +       return mips_get_machine_name();
>>   }
>>=20
>>   void __init arch_init_irq(void)
>>   {
>>          irqchip_init();
>>   }
>>  +
>>  +static int __init jz4740_machine_setup(void)
>>  +{
>>  +       mips_machine_setup();
>>  +
>>  +       return 0;
>>  +}
>>  +arch_initcall(jz4740_machine_setup);
>>  --
>>  2.11.0
>>=20
>>=20
>=20
> Why add another file in arch/mips/jz4740/? I think declaring a machine
> and compatible string in dts would suffice. Please feel free to
> correct me if I am wrong.
>=20
> Regards,
> PrasannaKumar

The point of this commit is, first, to have a textual description of=20
the board
that can then be retrieved in dmesg; then, to properly initialize the
mips_machtype early in the boot process. I think you are right and we=20
could
have both things just with "model" and "compatible" nodes in devicetree.

Regards,
-Paul
=

Re: [PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[PrasannaKumar Muralidharan]

Hi Paul,

On 2 January 2018 at 20:38, Paul Cercueil <paul@crapouillou.net> wrote:
> From: Maarten ter Huurne <maarten@treewalker.org>
>
> We have seen MMC DMA transfers read corrupted data from SDRAM when
> a burst interval ends at physical address 0x10000000. To avoid this
> problem, we remove the final page of low memory from the memory map.
>
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
> ---
>  arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
>  arch/mips/kernel/setup.c |  8 ++++++++
>  2 files changed, 32 insertions(+)
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index afd84ee966e8..6948b133a15d 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -23,6 +23,7 @@
>
>  #include <asm/bootinfo.h>
>  #include <asm/mips_machine.h>
> +#include <asm/page.h>
>  #include <asm/prom.h>
>
>  #include <asm/mach-jz4740/base.h>
> @@ -102,6 +103,29 @@ void __init arch_init_irq(void)
>         irqchip_init();
>  }
>
> +/*
> + * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
> + * interval ends at physical address 0x10000000. To avoid this problem, we
> + * remove the final page of low memory from the memory map.
> + */
> +void __init jz4770_reserve_unsafe_for_dma(void)
> +{
> +       int i;
> +
> +       for (i = 0; i < boot_mem_map.nr_map; i++) {
> +               struct boot_mem_map_entry *entry = boot_mem_map.map + i;
> +
> +               if (entry->type != BOOT_MEM_RAM)
> +                       continue;
> +
> +               if (entry->addr + entry->size != 0x10000000)
> +                       continue;
> +
> +               entry->size -= PAGE_SIZE;
> +               break;
> +       }
> +}
> +

Just a wild idea (probably bad too). Changing the memory node in the
device tree to skip this physical address would work I think. What is
your opinion about that?

>  static int __init jz4740_machine_setup(void)
>  {
>         mips_machine_setup();
> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
> index 85bc601e9a0d..5a2c20145aee 100644
> --- a/arch/mips/kernel/setup.c
> +++ b/arch/mips/kernel/setup.c
> @@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
>
>         parse_early_param();
>
> +#ifdef CONFIG_MACH_JZ4770
> +       if (current_cpu_type() == CPU_JZRISC &&
> +                               mips_machtype == MACH_INGENIC_JZ4770) {
> +               extern void __init jz4770_reserve_unsafe_for_dma(void);
> +               jz4770_reserve_unsafe_for_dma();
> +       }
> +#endif
> +
>         if (usermem) {
>                 pr_info("User-defined physical RAM map:\n");
>                 print_memory_map();
> --
> 2.11.0
>
>

Thanks,
PrasannaKumar

Re: [PATCH v5 15/15] MIPS: ingenic: Initial GCW Zero support

[Mathieu Malaterre]

On Tue, Jan 2, 2018 at 4:08 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
> handheld game console, successfully kickstarted in ~2012, running Linux.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/boot/dts/ingenic/Makefile |  1 +
>  arch/mips/boot/dts/ingenic/gcw0.dts | 61 +++++++++++++++++++++++++++++++++++++
>  arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
>  arch/mips/jz4740/Kconfig            |  4 +++
>  arch/mips/jz4740/boards.c           |  1 +
>  5 files changed, 94 insertions(+)
>  create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
>  create mode 100644 arch/mips/configs/gcw0_defconfig
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>      Drop custom CROSS_COMPILE from defconfig

Thanks for removing CROSS_COMPILE.

Acked-by: Mathieu Malaterre <malat@debian.org>

Re: [PATCH v5 07/15] MIPS: Setup boot_command_line before plat_mem_setup

[Mathieu Malaterre]

On Tue, Jan 2, 2018 at 4:08 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> From: Paul Burton <paul.burton@imgtec.com>
>
> Platforms using DT will typically call __dt_setup_arch from
> plat_mem_setup. This in turn calls early_init_dt_scan. When
> CONFIG_CMDLINE is set, this leads to its value being copied into
> boot_command_line by early_init_dt_scan_chosen. If this happens before
> the code setting up boot_command_line in arch_mem_init runs, that code
> will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
> boot_command_line again, duplicating it. For some command line
> parameters (eg. earlycon) this can be a problem. Set up
> boot_command_line before early_init_dt_scan_chosen gets called such that
> it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
> duplicated.
>
> Signed-off-by: Paul Burton <paul.burton@imgtec.com>
> ---
>  arch/mips/kernel/setup.c | 39 ++++++++++++++++++++-------------------
>  1 file changed, 20 insertions(+), 19 deletions(-)
>
>  v2: New patch in this series
>  v3: No change
>  v4: No change
>  v5: No change

I would have used @mips email. Anyway:

Acked-by: Mathieu Malaterre <malat@debian.org>

Re: [PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header

[Rob Herring]

On Tue, Jan 02, 2018 at 04:08:38PM +0100, Paul Cercueil wrote:
> This will be used from the devicetree bindings to specify the clocks
> that should be obtained from the jz4770-cgu driver.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
>  include/dt-bindings/clock/jz4770-cgu.h | 58 ++++++++++++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 include/dt-bindings/clock/jz4770-cgu.h

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v5 05/15] dt-bindings: clock: Add jz4770-cgu.h header

[Rob Herring]

On Tue, Jan 02, 2018 at 04:08:38PM +0100, Paul Cercueil wrote:
> This will be used from the devicetree bindings to specify the clocks
> that should be obtained from the jz4770-cgu driver.
> 
> Signed-off-by: Paul Cercueil <paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org>
> Acked-by: Stephen Boyd <sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> ---
>  include/dt-bindings/clock/jz4770-cgu.h | 58 ++++++++++++++++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 include/dt-bindings/clock/jz4770-cgu.h

Reviewed-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[Paul Cercueil]

Hi,
Hi,

>> [...]
>> 
>>  +/*
>>  + * We have seen MMC DMA transfers read corrupted data from SDRAM 
>> when a burst
>>  + * interval ends at physical address 0x10000000. To avoid this 
>> problem, we
>>  + * remove the final page of low memory from the memory map.
>>  + */
>>  +void __init jz4770_reserve_unsafe_for_dma(void)
>>  +{
>>  +       int i;
>>  +
>>  +       for (i = 0; i < boot_mem_map.nr_map; i++) {
>>  +               struct boot_mem_map_entry *entry = boot_mem_map.map 
>> + i;
>>  +
>>  +               if (entry->type != BOOT_MEM_RAM)
>>  +                       continue;
>>  +
>>  +               if (entry->addr + entry->size != 0x10000000)
>>  +                       continue;
>>  +
>>  +               entry->size -= PAGE_SIZE;
>>  +               break;
>>  +       }
>>  +}
>>  +
> 
> Just a wild idea (probably bad too). Changing the memory node in the
> device tree to skip this physical address would work I think. What is
> your opinion about that?

I guess it would work as well, but I don't think this fix should be in 
devicetree.

-Paul

[PATCH v6 00/15] JZ4770 SoC support

[Paul Cercueil]

Hi Ralf,

This is the V6 (and hopefully last) version of my JZ4770 patchset.

- In patches 07-08/15 I simply updated Paul Burton's email address
  from @imgtec.com to @mips.com.
- Patch 10/15 changed, now I only init mips_machtype from devicetree
  instead of using MIPS_MACHINE in platform code, as suggested by
  Prasanna Kumar.
- Patch 15/15 has a minor addition, I added a "model" property in the
  devicetree.

The rest (patches 01->06, 09, 11->14) are untouched.

Greetings,
Paul

[PATCH v6 01/15] clk: ingenic: Use const pointer to clk_ops in struct

[Paul Cercueil]

The CGU common code does not modify the pointed clk_ops structure, so it
should be marked as const.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.h        | 2 +-
 drivers/clk/ingenic/jz4780-cgu.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

 v2: New patch in this series
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index e78b586536ea..f1527cf75b3f 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -120,7 +120,7 @@ struct ingenic_cgu_gate_info {
  * @clk_ops: custom clock operation callbacks
  */
 struct ingenic_cgu_custom_info {
-	struct clk_ops *clk_ops;
+	const struct clk_ops *clk_ops;
 };
 
 /**
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ac3585ed8228..6427be117ff1 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -203,7 +203,7 @@ static int jz4780_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
-static struct clk_ops jz4780_otg_phy_ops = {
+static const struct clk_ops jz4780_otg_phy_ops = {
 	.get_parent = jz4780_otg_phy_get_parent,
 	.set_parent = jz4780_otg_phy_set_parent,
 
-- 
2.11.0

[PATCH v6 02/15] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[Paul Cercueil]

Previously, the clocks with a fixed divider would report their rate
as being the same as the one of their parent, independently of the
divider in use. This commit fixes this behaviour.

This went unnoticed as neither the jz4740 nor the jz4780 CGU code
have clocks with fixed dividers yet.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 2 ++
 1 file changed, 2 insertions(+)

 v2: No changes
 v3: No changes
 v4: No changes
 v5: No changes
 v6: No changes

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab393637f7b0..a2e73a6d60fd 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -328,6 +328,8 @@ ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 		div *= clk_info->div.div;
 
 		rate /= div;
+	} else if (clk_info->type & CGU_CLK_FIXDIV) {
+		rate /= clk_info->fixdiv.div;
 	}
 
 	return rate;
-- 
2.11.0

[PATCH v6 03/15] clk: ingenic: support PLLs with no bypass bit

[Paul Cercueil]

The second PLL of the JZ4770 does not have a bypass bit.
This commit makes it possible to support it with the current common CGU
code.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 3 ++-
 drivers/clk/ingenic/cgu.h | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index a2e73a6d60fd..381c4a17a1fc 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -100,7 +100,8 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
-	bypass = !!(ctl & BIT(pll_info->bypass_bit));
+	bypass = !pll_info->no_bypass_bit &&
+		 !!(ctl & BIT(pll_info->bypass_bit));
 	enable = !!(ctl & BIT(pll_info->enable_bit));
 
 	if (bypass)
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index f1527cf75b3f..9da34910bd80 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -48,6 +48,7 @@
  * @bypass_bit: the index of the bypass bit in the PLL control register
  * @enable_bit: the index of the enable bit in the PLL control register
  * @stable_bit: the index of the stable bit in the PLL control register
+ * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
 struct ingenic_cgu_pll_info {
 	unsigned reg;
@@ -58,6 +59,7 @@ struct ingenic_cgu_pll_info {
 	u8 bypass_bit;
 	u8 enable_bit;
 	u8 stable_bit;
+	bool no_bypass_bit;
 };
 
 /**
-- 
2.11.0

[PATCH v6 04/15] clk: ingenic: Add code to enable/disable PLLs

[Paul Cercueil]

This commit permits the PLLs to be dynamically enabled and disabled when
their children clocks are enabled and disabled.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 89 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 74 insertions(+), 15 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 381c4a17a1fc..56a712c9075f 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -107,9 +107,6 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	if (bypass)
 		return parent_rate;
 
-	if (!enable)
-		return 0;
-
 	for (od = 0; od < pll_info->od_max; od++) {
 		if (pll_info->od_encoding[od] == od_enc)
 			break;
@@ -153,17 +150,25 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	return div_u64((u64)parent_rate * m, n * od);
 }
 
-static long
-ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
-		       unsigned long *prate)
+static inline const struct ingenic_cgu_clk_info *to_clk_info(
+		struct ingenic_clk *ingenic_clk)
 {
-	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
 	const struct ingenic_cgu_clk_info *clk_info;
 
 	clk_info = &cgu->clock_info[ingenic_clk->idx];
 	BUG_ON(clk_info->type != CGU_CLK_PLL);
 
+	return clk_info;
+}
+
+static long
+ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		       unsigned long *prate)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+
 	return ingenic_pll_calc(clk_info, req_rate, *prate, NULL, NULL, NULL);
 }
 
@@ -171,19 +176,14 @@ static int
 ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 		     unsigned long parent_rate)
 {
-	const unsigned timeout = 100;
 	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
-	const struct ingenic_cgu_clk_info *clk_info;
-	const struct ingenic_cgu_pll_info *pll_info;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
 	unsigned long rate, flags;
-	unsigned m, n, od, i;
+	unsigned int m, n, od;
 	u32 ctl;
 
-	clk_info = &cgu->clock_info[ingenic_clk->idx];
-	BUG_ON(clk_info->type != CGU_CLK_PLL);
-	pll_info = &clk_info->pll;
-
 	rate = ingenic_pll_calc(clk_info, req_rate, parent_rate,
 			       &m, &n, &od);
 	if (rate != req_rate)
@@ -202,6 +202,26 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
+	writel(ctl, cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	return 0;
+}
+
+static int ingenic_pll_enable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	const unsigned int timeout = 100;
+	unsigned long flags;
+	unsigned int i;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+
 	ctl &= ~BIT(pll_info->bypass_bit);
 	ctl |= BIT(pll_info->enable_bit);
 
@@ -223,10 +243,48 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
+static void ingenic_pll_disable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	unsigned long flags;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+
+	ctl &= ~BIT(pll_info->enable_bit);
+
+	writel(ctl, cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+}
+
+static int ingenic_pll_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	unsigned long flags;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	return !!(ctl & BIT(pll_info->enable_bit));
+}
+
 static const struct clk_ops ingenic_pll_ops = {
 	.recalc_rate = ingenic_pll_recalc_rate,
 	.round_rate = ingenic_pll_round_rate,
 	.set_rate = ingenic_pll_set_rate,
+
+	.enable = ingenic_pll_enable,
+	.disable = ingenic_pll_disable,
+	.is_enabled = ingenic_pll_is_enabled,
 };
 
 /*
@@ -601,6 +659,7 @@ static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
 		}
 	} else if (caps & CGU_CLK_PLL) {
 		clk_init.ops = &ingenic_pll_ops;
+		clk_init.flags |= CLK_SET_RATE_GATE;
 
 		caps &= ~CGU_CLK_PLL;
 
-- 
2.11.0

[PATCH v6 05/15] dt-bindings: clock: Add jz4770-cgu.h header

[Paul Cercueil]

This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4770-cgu driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/clock/jz4770-cgu.h | 58 ++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 include/dt-bindings/clock/jz4770-cgu.h

 v3: New patch in this series
 v4: No change
 v5: Use SPDX license identifier
 v6: No change

diff --git a/include/dt-bindings/clock/jz4770-cgu.h b/include/dt-bindings/clock/jz4770-cgu.h
new file mode 100644
index 000000000000..d68a7695a1f8
--- /dev/null
+++ b/include/dt-bindings/clock/jz4770-cgu.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,jz4770-cgu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4770_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4770_CGU_H__
+
+#define JZ4770_CLK_EXT		0
+#define JZ4770_CLK_OSC32K	1
+#define JZ4770_CLK_PLL0		2
+#define JZ4770_CLK_PLL1		3
+#define JZ4770_CLK_CCLK		4
+#define JZ4770_CLK_H0CLK	5
+#define JZ4770_CLK_H1CLK	6
+#define JZ4770_CLK_H2CLK	7
+#define JZ4770_CLK_C1CLK	8
+#define JZ4770_CLK_PCLK		9
+#define JZ4770_CLK_MMC0_MUX	10
+#define JZ4770_CLK_MMC0		11
+#define JZ4770_CLK_MMC1_MUX	12
+#define JZ4770_CLK_MMC1		13
+#define JZ4770_CLK_MMC2_MUX	14
+#define JZ4770_CLK_MMC2		15
+#define JZ4770_CLK_CIM		16
+#define JZ4770_CLK_UHC		17
+#define JZ4770_CLK_GPU		18
+#define JZ4770_CLK_BCH		19
+#define JZ4770_CLK_LPCLK_MUX	20
+#define JZ4770_CLK_GPS		21
+#define JZ4770_CLK_SSI_MUX	22
+#define JZ4770_CLK_PCM_MUX	23
+#define JZ4770_CLK_I2S		24
+#define JZ4770_CLK_OTG		25
+#define JZ4770_CLK_SSI0		26
+#define JZ4770_CLK_SSI1		27
+#define JZ4770_CLK_SSI2		28
+#define JZ4770_CLK_PCM0		29
+#define JZ4770_CLK_PCM1		30
+#define JZ4770_CLK_DMA		31
+#define JZ4770_CLK_I2C0		32
+#define JZ4770_CLK_I2C1		33
+#define JZ4770_CLK_I2C2		34
+#define JZ4770_CLK_UART0	35
+#define JZ4770_CLK_UART1	36
+#define JZ4770_CLK_UART2	37
+#define JZ4770_CLK_UART3	38
+#define JZ4770_CLK_IPU		39
+#define JZ4770_CLK_ADC		40
+#define JZ4770_CLK_AIC		41
+#define JZ4770_CLK_AUX		42
+#define JZ4770_CLK_VPU		43
+#define JZ4770_CLK_UHC_PHY	44
+#define JZ4770_CLK_OTG_PHY	45
+#define JZ4770_CLK_EXT512	46
+#define JZ4770_CLK_RTC		47
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4770_CGU_H__ */
-- 
2.11.0

[PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver

[Paul Cercueil]

Add support for the clocks provided by the CGU in the Ingenic JZ4770
SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/Makefile     |   1 +
 drivers/clk/ingenic/jz4770-cgu.c | 483 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 484 insertions(+)
 create mode 100644 drivers/clk/ingenic/jz4770-cgu.c

 v2: Make structures static const
 v3: <dt-bindings/clock/jz4770-cgu.h> is now added in a separate patch
 v4: No change
 v5: Use SPDX license identifier
 v6: No change

diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index cd47b0664c2b..1456e4cdb562 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,3 +1,4 @@
 obj-y				+= cgu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
+obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
new file mode 100644
index 000000000000..c78d369b9403
--- /dev/null
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4770 SoC CGU driver
+ * Copyright 2018, Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include "cgu.h"
+
+/*
+ * CPM registers offset address definition
+ */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_LCR		0x04
+#define CGU_REG_CPPCR0		0x10
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_CPPCR1		0x30
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_USBCDR		0x50
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_UHCCDR		0x6c
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_GPSCDR		0x80
+#define CGU_REG_PCMCDR		0x84
+#define CGU_REG_GPUCDR		0x88
+#define CGU_REG_MSC1CDR		0xA4
+#define CGU_REG_MSC2CDR		0xA8
+#define CGU_REG_BCHCDR		0xAC
+
+/* bits within the LCR register */
+#define LCR_LPM			BIT(0)		/* Low Power Mode */
+
+/* bits within the OPCR register */
+#define OPCR_SPENDH		BIT(5)		/* UHC PHY suspend */
+#define OPCR_SPENDN		BIT(7)		/* OTG PHY suspend */
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_UHC_POWER	BIT(5)		/* UHC PHY power down */
+
+static struct ingenic_cgu *cgu;
+
+static int jz4770_uhc_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDH, reg_opcr);
+	writel(readl(reg_usbpcr1) | USBPCR1_UHC_POWER, reg_usbpcr1);
+	return 0;
+}
+
+static void jz4770_uhc_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	writel(readl(reg_usbpcr1) & ~USBPCR1_UHC_POWER, reg_usbpcr1);
+	writel(readl(reg_opcr) | OPCR_SPENDH, reg_opcr);
+}
+
+static int jz4770_uhc_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	return !(readl(reg_opcr) & OPCR_SPENDH) &&
+		(readl(reg_usbpcr1) & USBPCR1_UHC_POWER);
+}
+
+static const struct clk_ops jz4770_uhc_phy_ops = {
+	.enable = jz4770_uhc_phy_enable,
+	.disable = jz4770_uhc_phy_disable,
+	.is_enabled = jz4770_uhc_phy_is_enabled,
+};
+
+static int jz4770_otg_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	writel(readl(reg_opcr) | OPCR_SPENDN, reg_opcr);
+
+	/* Wait for the clock to be stable */
+	udelay(50);
+	return 0;
+}
+
+static void jz4770_otg_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDN, reg_opcr);
+}
+
+static int jz4770_otg_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	return !!(readl(reg_opcr) & OPCR_SPENDN);
+}
+
+static const struct clk_ops jz4770_otg_phy_ops = {
+	.enable = jz4770_otg_phy_enable,
+	.disable = jz4770_otg_phy_disable,
+	.is_enabled = jz4770_otg_phy_is_enabled,
+};
+
+static const s8 pll_od_encoding[8] = {
+	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
+};
+
+static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[JZ4770_CLK_EXT] = { "ext", CGU_CLK_EXT },
+	[JZ4770_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[JZ4770_CLK_PLL0] = {
+		"pll0", CGU_CLK_PLL,
+		.parents = { JZ4770_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR0,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 9,
+			.enable_bit = 8,
+			.stable_bit = 10,
+		},
+	},
+
+	[JZ4770_CLK_PLL1] = {
+		/* TODO: PLL1 can depend on PLL0 */
+		"pll1", CGU_CLK_PLL,
+		.parents = { JZ4770_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR1,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.enable_bit = 7,
+			.stable_bit = 6,
+			.no_bypass_bit = true,
+		},
+	},
+
+	/* Main clocks */
+
+	[JZ4770_CLK_CCLK] = {
+		"cclk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_H0CLK] = {
+		"h0clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_H1CLK] = {
+		"h1clk", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1 },
+		.gate = { CGU_REG_LCR, 30 },
+	},
+	[JZ4770_CLK_H2CLK] = {
+		"h2clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_C1CLK] = {
+		"c1clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1 },
+	},
+
+	/* Those divided clocks can connect to PLL0 or PLL1 */
+
+	[JZ4770_CLK_MMC0_MUX] = {
+		"mmc0_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC0CDR, 30, 1 },
+		.div = { CGU_REG_MSC0CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC0CDR, 31 },
+	},
+	[JZ4770_CLK_MMC1_MUX] = {
+		"mmc1_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC1CDR, 30, 1 },
+		.div = { CGU_REG_MSC1CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC1CDR, 31 },
+	},
+	[JZ4770_CLK_MMC2_MUX] = {
+		"mmc2_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC2CDR, 30, 1 },
+		.div = { CGU_REG_MSC2CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC2CDR, 31 },
+	},
+	[JZ4770_CLK_CIM] = {
+		"cim", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_CIMCDR, 31, 1 },
+		.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 26 },
+	},
+	[JZ4770_CLK_UHC] = {
+		"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_UHCCDR, 29, 1 },
+		.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 24 },
+	},
+	[JZ4770_CLK_GPU] = {
+		"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, -1 },
+		.mux = { CGU_REG_GPUCDR, 31, 1 },
+		.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 9 },
+	},
+	[JZ4770_CLK_BCH] = {
+		"bch", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_BCHCDR, 31, 1 },
+		.div = { CGU_REG_BCHCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 1 },
+	},
+	[JZ4770_CLK_LPCLK_MUX] = {
+		"lpclk", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_LPCDR, 29, 1 },
+		.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 28 },
+	},
+	[JZ4770_CLK_GPS] = {
+		"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_GPSCDR, 31, 1 },
+		.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 22 },
+	},
+
+	/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
+
+	[JZ4770_CLK_SSI_MUX] = {
+		"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_SSICDR, 30, 2 },
+		.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1 },
+	},
+	[JZ4770_CLK_PCM_MUX] = {
+		"pcm_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_PCMCDR, 30, 2 },
+		.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1 },
+	},
+	[JZ4770_CLK_I2S] = {
+		"i2s", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_I2SCDR, 30, 2 },
+		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 13 },
+	},
+	[JZ4770_CLK_OTG] = {
+		"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_USBCDR, 30, 2 },
+		.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 2 },
+	},
+
+	/* Gate-only clocks */
+
+	[JZ4770_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+	[JZ4770_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+	[JZ4770_CLK_SSI2] = {
+		"ssi2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+	[JZ4770_CLK_PCM0] = {
+		"pcm0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PCM_MUX, },
+		.gate = { CGU_REG_CLKGR1, 8 },
+	},
+	[JZ4770_CLK_PCM1] = {
+		"pcm1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PCM_MUX, },
+		.gate = { CGU_REG_CLKGR1, 10 },
+	},
+	[JZ4770_CLK_DMA] = {
+		"dma", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H2CLK, },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+	[JZ4770_CLK_I2C0] = {
+		"i2c0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+	[JZ4770_CLK_I2C1] = {
+		"i2c1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+	[JZ4770_CLK_I2C2] = {
+		"i2c2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR1, 15 },
+	},
+	[JZ4770_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+	[JZ4770_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 16 },
+	},
+	[JZ4770_CLK_UART2] = {
+		"uart2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 17 },
+	},
+	[JZ4770_CLK_UART3] = {
+		"uart3", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 18 },
+	},
+	[JZ4770_CLK_IPU] = {
+		"ipu", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H0CLK, },
+		.gate = { CGU_REG_CLKGR0, 29 },
+	},
+	[JZ4770_CLK_ADC] = {
+		"adc", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+	[JZ4770_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+	[JZ4770_CLK_AUX] = {
+		"aux", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_C1CLK, },
+		.gate = { CGU_REG_CLKGR1, 14 },
+	},
+	[JZ4770_CLK_VPU] = {
+		"vpu", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H1CLK, },
+		.gate = { CGU_REG_CLKGR1, 7 },
+	},
+	[JZ4770_CLK_MMC0] = {
+		"mmc0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC0_MUX, },
+		.gate = { CGU_REG_CLKGR0, 3 },
+	},
+	[JZ4770_CLK_MMC1] = {
+		"mmc1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC1_MUX, },
+		.gate = { CGU_REG_CLKGR0, 11 },
+	},
+	[JZ4770_CLK_MMC2] = {
+		"mmc2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC2_MUX, },
+		.gate = { CGU_REG_CLKGR0, 12 },
+	},
+
+	/* Custom clocks */
+
+	[JZ4770_CLK_UHC_PHY] = {
+		"uhc_phy", CGU_CLK_CUSTOM,
+		.parents = { JZ4770_CLK_UHC, -1, -1, -1 },
+		.custom = { &jz4770_uhc_phy_ops },
+	},
+	[JZ4770_CLK_OTG_PHY] = {
+		"usb_phy", CGU_CLK_CUSTOM,
+		.parents = { JZ4770_CLK_OTG, -1, -1, -1 },
+		.custom = { &jz4770_otg_phy_ops },
+	},
+
+	[JZ4770_CLK_EXT512] = {
+		"ext/512", CGU_CLK_FIXDIV,
+		.parents = { JZ4770_CLK_EXT },
+		.fixdiv = { 512 },
+	},
+
+	[JZ4770_CLK_RTC] = {
+		"rtc", CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT512, JZ4770_CLK_OSC32K, },
+		.mux = { CGU_REG_OPCR, 2, 1},
+	},
+};
+
+#if IS_ENABLED(CONFIG_PM_SLEEP)
+static int jz4770_cgu_pm_suspend(void)
+{
+	u32 val;
+
+	val = readl(cgu->base + CGU_REG_LCR);
+	writel(val | LCR_LPM, cgu->base + CGU_REG_LCR);
+	return 0;
+}
+
+static void jz4770_cgu_pm_resume(void)
+{
+	u32 val;
+
+	val = readl(cgu->base + CGU_REG_LCR);
+	writel(val & ~LCR_LPM, cgu->base + CGU_REG_LCR);
+}
+
+static struct syscore_ops jz4770_cgu_pm_ops = {
+	.suspend = jz4770_cgu_pm_suspend,
+	.resume = jz4770_cgu_pm_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+static void __init jz4770_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
+			      ARRAY_SIZE(jz4770_cgu_clocks), np);
+	if (!cgu)
+		pr_err("%s: failed to initialise CGU\n", __func__);
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval)
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+#if IS_ENABLED(CONFIG_PM_SLEEP)
+	register_syscore_ops(&jz4770_cgu_pm_ops);
+#endif
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-cgu", jz4770_cgu_init);
-- 
2.11.0

[PATCH v6 07/15] MIPS: Setup boot_command_line before plat_mem_setup

[Paul Cercueil]

From: Paul Burton <paul.burton@mips.com>

Platforms using DT will typically call __dt_setup_arch from
plat_mem_setup. This in turn calls early_init_dt_scan. When
CONFIG_CMDLINE is set, this leads to its value being copied into
boot_command_line by early_init_dt_scan_chosen. If this happens before
the code setting up boot_command_line in arch_mem_init runs, that code
will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
boot_command_line again, duplicating it. For some command line
parameters (eg. earlycon) this can be a problem. Set up
boot_command_line before early_init_dt_scan_chosen gets called such that
it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
duplicated.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/kernel/setup.c | 39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

 v2: New patch in this series
 v3: No change
 v4: No change
 v5: No change
 v6: Update Paul Burton's email address

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 702c678de116..85bc601e9a0d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -826,25 +826,6 @@ static void __init arch_mem_init(char **cmdline_p)
 	struct memblock_region *reg;
 	extern void plat_mem_setup(void);
 
-	/* call board setup routine */
-	plat_mem_setup();
-
-	/*
-	 * Make sure all kernel memory is in the maps.  The "UP" and
-	 * "DOWN" are opposite for initdata since if it crosses over
-	 * into another memory section you don't want that to be
-	 * freed when the initdata is freed.
-	 */
-	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
-			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
-			 BOOT_MEM_RAM);
-	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
-			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
-			 BOOT_MEM_INIT_RAM);
-
-	pr_info("Determined physical RAM map:\n");
-	print_memory_map();
-
 #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 #else
@@ -872,6 +853,26 @@ static void __init arch_mem_init(char **cmdline_p)
 	}
 #endif
 #endif
+
+	/* call board setup routine */
+	plat_mem_setup();
+
+	/*
+	 * Make sure all kernel memory is in the maps.  The "UP" and
+	 * "DOWN" are opposite for initdata since if it crosses over
+	 * into another memory section you don't want that to be
+	 * freed when the initdata is freed.
+	 */
+	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
+			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
+			 BOOT_MEM_RAM);
+	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
+			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
+			 BOOT_MEM_INIT_RAM);
+
+	pr_info("Determined physical RAM map:\n");
+	print_memory_map();
+
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
 	*cmdline_p = command_line;
-- 
2.11.0

[PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code

[Paul Cercueil]

From: Paul Burton <paul.burton@mips.com>

jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
arcs_cmdline, up to argc (in fw_arg0). The common code in
fw_init_cmdline will do the exact same thing when run on a system where
fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
use it). Remove the custom implementation & use the generic code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 arch/mips/jz4740/prom.c | 24 ++----------------------
 1 file changed, 2 insertions(+), 22 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: Update Paul Burton's email address

diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 47e857194ce6..a62dd8e6ecf9 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -20,33 +20,13 @@
 #include <linux/serial_reg.h>
 
 #include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
 #include <asm/mach-jz4740/base.h>
 
-static __init void jz4740_init_cmdline(int argc, char *argv[])
-{
-	unsigned int count = COMMAND_LINE_SIZE - 1;
-	int i;
-	char *dst = &(arcs_cmdline[0]);
-	char *src;
-
-	for (i = 1; i < argc && count; ++i) {
-		src = argv[i];
-		while (*src && count) {
-			*dst++ = *src++;
-			--count;
-		}
-		*dst++ = ' ';
-	}
-	if (i > 1)
-		--dst;
-
-	*dst = 0;
-}
-
 void __init prom_init(void)
 {
-	jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
 	mips_machtype = MACH_INGENIC_JZ4740;
+	fw_init_cmdline();
 }
 
 void __init prom_free_prom_memory(void)
-- 
2.11.0

[PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs

[Paul Cercueil]

Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
newly supported JZ4770 SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 arch/mips/include/asm/bootinfo.h | 2 ++
 1 file changed, 2 insertions(+)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index e26a093bb17a..a301a8f4bc66 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -79,6 +79,8 @@ enum loongson_machine_type {
  */
 #define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
 #define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
+#define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
+#define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
 
 extern char *system_type;
 const char *get_system_type(void);
-- 
2.11.0

[PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string

[Paul Cercueil]

Previously, the mips_machtype variable was always initialized
to MACH_INGENIC_JZ4740 even if running on different SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/jz4740/prom.c  |  1 -
 arch/mips/jz4740/setup.c | 26 ++++++++++++++++++++++----
 2 files changed, 22 insertions(+), 5 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
 v6: Init mips_machtype from DT compatible string instead of using
     MIPS_MACHINE

diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index a62dd8e6ecf9..eb9f2f97bedb 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -25,7 +25,6 @@
 
 void __init prom_init(void)
 {
-	mips_machtype = MACH_INGENIC_JZ4740;
 	fw_init_cmdline();
 }
 
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 6d0152321819..cd89536fbba1 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -53,16 +53,30 @@ static void __init jz4740_detect_mem(void)
 	add_memory_region(0, size, BOOT_MEM_RAM);
 }
 
+static unsigned long __init get_board_mach_type(const void *fdt)
+{
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
+		return MACH_INGENIC_JZ4780;
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
+		return MACH_INGENIC_JZ4770;
+
+	return MACH_INGENIC_JZ4740;
+}
+
 void __init plat_mem_setup(void)
 {
 	int offset;
 
+	if (!early_init_dt_scan(__dtb_start))
+		return;
+
 	jz4740_reset_init();
-	__dt_setup_arch(__dtb_start);
 
 	offset = fdt_path_offset(__dtb_start, "/memory");
 	if (offset < 0)
 		jz4740_detect_mem();
+
+	mips_machtype = get_board_mach_type(__dtb_start);
 }
 
 void __init device_tree_init(void)
@@ -75,10 +89,14 @@ void __init device_tree_init(void)
 
 const char *get_system_type(void)
 {
-	if (IS_ENABLED(CONFIG_MACH_JZ4780))
+	switch (mips_machtype) {
+	case MACH_INGENIC_JZ4780:
 		return "JZ4780";
-
-	return "JZ4740";
+	case MACH_INGENIC_JZ4770:
+		return "JZ4770";
+	default:
+		return "JZ4740";
+	}
 }
 
 void __init arch_init_irq(void)
-- 
2.11.0

[PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support

[Paul Cercueil]

Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
 arch/mips/jz4740/Kconfig               |   6 +
 arch/mips/jz4740/time.c                |   2 +-
 3 files changed, 219 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
 v6: No change

diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
new file mode 100644
index 000000000000..7c2804f3f5f1
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4770";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4770-intc";
+		reg = <0x10001000 0x40>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4770-cgu@10000000 {
+		compatible = "ingenic,jz4770-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&osc32k>;
+		clock-names = "ext", "osc32k";
+
+		#clock-cells = <1>;
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4770-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpe: gpio@4 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <4>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		gpf: gpio@5 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <5>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 160 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10030000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <5>;
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10031000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <4>;
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10032000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	uart3: serial@10033000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10033000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <2>;
+
+		status = "disabled";
+	};
+
+	uhc: uhc@13430000 {
+		compatible = "generic-ohci";
+		reg = <0x13430000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+		assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+		assigned-clock-rates = <48000000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <20>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 643af2012e14..29a9361a2b77 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -18,6 +18,12 @@ config MACH_JZ4740
 	bool
 	select SYS_HAS_CPU_MIPS32_R1
 
+config MACH_JZ4770
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM
+
 config MACH_JZ4780
 	bool
 	select MIPS_CPU_SCACHE
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index bb1ad5119da4..2ca9160f642a 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
 #ifdef CONFIG_MACH_JZ4740
 	.irq = JZ4740_IRQ_TCU0,
 #endif
-#ifdef CONFIG_MACH_JZ4780
+#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
 	.irq = JZ4780_IRQ_TCU2,
 #endif
 };
-- 
2.11.0

[PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity

[Paul Cercueil]

From: Maarten ter Huurne <maarten@treewalker.org>

According to config2, the associativity would be 5-ways, but the
documentation states 4-ways, which also matches the documented
L2 cache size of 256 kB.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
---
 arch/mips/mm/sc-mips.c | 9 +++++++++
 1 file changed, 9 insertions(+)

 v2: No change
 v3: No change
 v4: Rebased on top of Linux 4.15-rc5
 v5: No change
 v6: No change

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 548acb7f8557..394673991bab 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -16,6 +16,7 @@
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
 #include <asm/mips-cps.h>
+#include <asm/bootinfo.h>
 
 /*
  * MIPS32/MIPS64 L2 cache handling
@@ -220,6 +221,14 @@ static inline int __init mips_sc_probe(void)
 	else
 		return 0;
 
+	/*
+	 * According to config2 it would be 5-ways, but that is contradicted
+	 * by all documentation.
+	 */
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770)
+		c->scache.ways = 4;
+
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-- 
2.11.0

[PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[Paul Cercueil]

From: Maarten ter Huurne <maarten@treewalker.org>

We have seen MMC DMA transfers read corrupted data from SDRAM when
a burst interval ends at physical address 0x10000000. To avoid this
problem, we remove the final page of low memory from the memory map.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
---
 arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
 arch/mips/kernel/setup.c |  8 ++++++++
 2 files changed, 32 insertions(+)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index cd89536fbba1..18c57c4bf47e 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -22,6 +22,7 @@
 #include <linux/of_fdt.h>
 
 #include <asm/bootinfo.h>
+#include <asm/page.h>
 #include <asm/prom.h>
 
 #include <asm/mach-jz4740/base.h>
@@ -103,3 +104,26 @@ void __init arch_init_irq(void)
 {
 	irqchip_init();
 }
+
+/*
+ * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
+ * interval ends at physical address 0x10000000. To avoid this problem, we
+ * remove the final page of low memory from the memory map.
+ */
+void __init jz4770_reserve_unsafe_for_dma(void)
+{
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
+
+		if (entry->type != BOOT_MEM_RAM)
+			continue;
+
+		if (entry->addr + entry->size != 0x10000000)
+			continue;
+
+		entry->size -= PAGE_SIZE;
+		break;
+	}
+}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 85bc601e9a0d..5a2c20145aee 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
 
 	parse_early_param();
 
+#ifdef CONFIG_MACH_JZ4770
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770) {
+		extern void __init jz4770_reserve_unsafe_for_dma(void);
+		jz4770_reserve_unsafe_for_dma();
+	}
+#endif
+
 	if (usermem) {
 		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
-- 
2.11.0

[PATCH v6 14/15] devicetree/bindings: Add GCW vendor prefix

[Paul Cercueil]

Game Consoles Worldwide, mostly known under the acronym GCW, is the
creator of the GCW Zero open-source video game system.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

 v2: It's 'Game Consoles Worldwide', not 'Games Consoles Worldwide'
 v3: No change
 v4: No change
 v5: No change
 v6: No change

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0994bdd82cd3..f40f4da39937 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -123,6 +123,7 @@ focaltech	FocalTech Systems Co.,Ltd
 friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
 fsl	Freescale Semiconductor
 fujitsu	Fujitsu Ltd.
+gcw Game Consoles Worldwide
 ge	General Electric Company
 geekbuying	GeekBuying
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
-- 
2.11.0

[PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support

[Paul Cercueil]

The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
handheld game console, successfully kickstarted in ~2012, running Linux.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/boot/dts/ingenic/Makefile |  1 +
 arch/mips/boot/dts/ingenic/gcw0.dts | 62 +++++++++++++++++++++++++++++++++++++
 arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
 arch/mips/jz4740/Kconfig            |  4 +++
 4 files changed, 94 insertions(+)
 create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
 create mode 100644 arch/mips/configs/gcw0_defconfig

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
     Drop custom CROSS_COMPILE from defconfig
 v6: Add "model" property in devicetree

diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 6a31759839b4..5b1361a89e02 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
+dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
new file mode 100644
index 000000000000..5cd76ac9cfba
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4770.dtsi"
+
+/ {
+	compatible = "gcw,zero", "ingenic,jz4770";
+	model = "GCW Zero";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial2:57600n8";
+	};
+
+	board {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <>;
+
+		otg_phy: otg-phy {
+			compatible = "usb-nop-xceiv";
+			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&cgu {
+	/* Put high-speed peripherals under PLL1, such that we can change the
+	 * PLL0 frequency on demand without having to suspend peripherals.
+	 * We use a rate of 432 MHz, which is the least common multiple of
+	 * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+	 */
+	assigned-clocks =
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_UHC>;
+	assigned-clock-parents =
+		<0>,
+		<&cgu JZ4770_CLK_PLL1>;
+	assigned-clock-rates =
+		<432000000>;
+};
+
+&uhc {
+	/* The WiFi module is connected to the UHC. */
+	status = "okay";
+};
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
new file mode 100644
index 000000000000..99ac1fa3b35f
--- /dev/null
+++ b/arch/mips/configs/gcw0_defconfig
@@ -0,0 +1,27 @@
+CONFIG_MACH_INGENIC=y
+CONFIG_JZ4770_GCW0=y
+CONFIG_HIGHMEM=y
+# CONFIG_BOUNCE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_SECCOMP is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_EMBEDDED=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_TMPFS=y
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 29a9361a2b77..4dd0c446ecec 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -8,6 +8,10 @@ config JZ4740_QI_LB60
 	bool "Qi Hardware Ben NanoNote"
 	select MACH_JZ4740
 
+config JZ4770_GCW0
+	bool "Game Consoles Worldwide GCW Zero"
+	select MACH_JZ4770
+
 config JZ4780_CI20
 	bool "MIPS Creator CI20"
 	select MACH_JZ4780
-- 
2.11.0

Re: [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support

[Philippe Ombredanne]

On Fri, Jan 5, 2018 at 7:25 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
> handheld game console, successfully kickstarted in ~2012, running Linux.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Acked-by: Mathieu Malaterre <malat@debian.org>
> ---
>  arch/mips/boot/dts/ingenic/Makefile |  1 +
>  arch/mips/boot/dts/ingenic/gcw0.dts | 62 +++++++++++++++++++++++++++++++++++++
>  arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
>  arch/mips/jz4740/Kconfig            |  4 +++
>  4 files changed, 94 insertions(+)
>  create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
>  create mode 100644 arch/mips/configs/gcw0_defconfig
>
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>      Drop custom CROSS_COMPILE from defconfig
>  v6: Add "model" property in devicetree

For the use of SPDX tags for the whole patch set: thank you!

Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
-- 
Cordially
Philippe Ombredanne

Re: [PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 16035 bytes --]

Hi Paul,

On Fri, Jan 05, 2018 at 07:25:04PM +0100, Paul Cercueil wrote:
> Add support for the clocks provided by the CGU in the Ingenic JZ4770
> SoC.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
>  drivers/clk/ingenic/Makefile     |   1 +
>  drivers/clk/ingenic/jz4770-cgu.c | 483 +++++++++++++++++++++++++++++++++++++++

Should this file and the jz4770-cgu.h header be added to a new
MAINTAINERS entry for this driver and/or for the platform as a whole?

Cheers
James

>  2 files changed, 484 insertions(+)
>  create mode 100644 drivers/clk/ingenic/jz4770-cgu.c
> 
>  v2: Make structures static const
>  v3: <dt-bindings/clock/jz4770-cgu.h> is now added in a separate patch
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: No change
> 
> diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
> index cd47b0664c2b..1456e4cdb562 100644
> --- a/drivers/clk/ingenic/Makefile
> +++ b/drivers/clk/ingenic/Makefile
> @@ -1,3 +1,4 @@
>  obj-y				+= cgu.o
>  obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
> +obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
>  obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
> diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
> new file mode 100644
> index 000000000000..c78d369b9403
> --- /dev/null
> +++ b/drivers/clk/ingenic/jz4770-cgu.c
> @@ -0,0 +1,483 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * JZ4770 SoC CGU driver
> + * Copyright 2018, Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/syscore_ops.h>
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +#include "cgu.h"
> +
> +/*
> + * CPM registers offset address definition
> + */
> +#define CGU_REG_CPCCR		0x00
> +#define CGU_REG_LCR		0x04
> +#define CGU_REG_CPPCR0		0x10
> +#define CGU_REG_CLKGR0		0x20
> +#define CGU_REG_OPCR		0x24
> +#define CGU_REG_CLKGR1		0x28
> +#define CGU_REG_CPPCR1		0x30
> +#define CGU_REG_USBPCR1		0x48
> +#define CGU_REG_USBCDR		0x50
> +#define CGU_REG_I2SCDR		0x60
> +#define CGU_REG_LPCDR		0x64
> +#define CGU_REG_MSC0CDR		0x68
> +#define CGU_REG_UHCCDR		0x6c
> +#define CGU_REG_SSICDR		0x74
> +#define CGU_REG_CIMCDR		0x7c
> +#define CGU_REG_GPSCDR		0x80
> +#define CGU_REG_PCMCDR		0x84
> +#define CGU_REG_GPUCDR		0x88
> +#define CGU_REG_MSC1CDR		0xA4
> +#define CGU_REG_MSC2CDR		0xA8
> +#define CGU_REG_BCHCDR		0xAC
> +
> +/* bits within the LCR register */
> +#define LCR_LPM			BIT(0)		/* Low Power Mode */
> +
> +/* bits within the OPCR register */
> +#define OPCR_SPENDH		BIT(5)		/* UHC PHY suspend */
> +#define OPCR_SPENDN		BIT(7)		/* OTG PHY suspend */
> +
> +/* bits within the USBPCR1 register */
> +#define USBPCR1_UHC_POWER	BIT(5)		/* UHC PHY power down */
> +
> +static struct ingenic_cgu *cgu;
> +
> +static int jz4770_uhc_phy_enable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
> +
> +	writel(readl(reg_opcr) & ~OPCR_SPENDH, reg_opcr);
> +	writel(readl(reg_usbpcr1) | USBPCR1_UHC_POWER, reg_usbpcr1);
> +	return 0;
> +}
> +
> +static void jz4770_uhc_phy_disable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
> +
> +	writel(readl(reg_usbpcr1) & ~USBPCR1_UHC_POWER, reg_usbpcr1);
> +	writel(readl(reg_opcr) | OPCR_SPENDH, reg_opcr);
> +}
> +
> +static int jz4770_uhc_phy_is_enabled(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
> +
> +	return !(readl(reg_opcr) & OPCR_SPENDH) &&
> +		(readl(reg_usbpcr1) & USBPCR1_UHC_POWER);
> +}
> +
> +static const struct clk_ops jz4770_uhc_phy_ops = {
> +	.enable = jz4770_uhc_phy_enable,
> +	.disable = jz4770_uhc_phy_disable,
> +	.is_enabled = jz4770_uhc_phy_is_enabled,
> +};
> +
> +static int jz4770_otg_phy_enable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +
> +	writel(readl(reg_opcr) | OPCR_SPENDN, reg_opcr);
> +
> +	/* Wait for the clock to be stable */
> +	udelay(50);
> +	return 0;
> +}
> +
> +static void jz4770_otg_phy_disable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +
> +	writel(readl(reg_opcr) & ~OPCR_SPENDN, reg_opcr);
> +}
> +
> +static int jz4770_otg_phy_is_enabled(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +
> +	return !!(readl(reg_opcr) & OPCR_SPENDN);
> +}
> +
> +static const struct clk_ops jz4770_otg_phy_ops = {
> +	.enable = jz4770_otg_phy_enable,
> +	.disable = jz4770_otg_phy_disable,
> +	.is_enabled = jz4770_otg_phy_is_enabled,
> +};
> +
> +static const s8 pll_od_encoding[8] = {
> +	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
> +};
> +
> +static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
> +
> +	/* External clocks */
> +
> +	[JZ4770_CLK_EXT] = { "ext", CGU_CLK_EXT },
> +	[JZ4770_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
> +
> +	/* PLLs */
> +
> +	[JZ4770_CLK_PLL0] = {
> +		"pll0", CGU_CLK_PLL,
> +		.parents = { JZ4770_CLK_EXT },
> +		.pll = {
> +			.reg = CGU_REG_CPPCR0,
> +			.m_shift = 24,
> +			.m_bits = 7,
> +			.m_offset = 1,
> +			.n_shift = 18,
> +			.n_bits = 5,
> +			.n_offset = 1,
> +			.od_shift = 16,
> +			.od_bits = 2,
> +			.od_max = 8,
> +			.od_encoding = pll_od_encoding,
> +			.bypass_bit = 9,
> +			.enable_bit = 8,
> +			.stable_bit = 10,
> +		},
> +	},
> +
> +	[JZ4770_CLK_PLL1] = {
> +		/* TODO: PLL1 can depend on PLL0 */
> +		"pll1", CGU_CLK_PLL,
> +		.parents = { JZ4770_CLK_EXT },
> +		.pll = {
> +			.reg = CGU_REG_CPPCR1,
> +			.m_shift = 24,
> +			.m_bits = 7,
> +			.m_offset = 1,
> +			.n_shift = 18,
> +			.n_bits = 5,
> +			.n_offset = 1,
> +			.od_shift = 16,
> +			.od_bits = 2,
> +			.od_max = 8,
> +			.od_encoding = pll_od_encoding,
> +			.enable_bit = 7,
> +			.stable_bit = 6,
> +			.no_bypass_bit = true,
> +		},
> +	},
> +
> +	/* Main clocks */
> +
> +	[JZ4770_CLK_CCLK] = {
> +		"cclk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_H0CLK] = {
> +		"h0clk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_H1CLK] = {
> +		"h1clk", CGU_CLK_DIV | CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1 },
> +		.gate = { CGU_REG_LCR, 30 },
> +	},
> +	[JZ4770_CLK_H2CLK] = {
> +		"h2clk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_C1CLK] = {
> +		"c1clk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_PCLK] = {
> +		"pclk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1 },
> +	},
> +
> +	/* Those divided clocks can connect to PLL0 or PLL1 */
> +
> +	[JZ4770_CLK_MMC0_MUX] = {
> +		"mmc0_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_MSC0CDR, 30, 1 },
> +		.div = { CGU_REG_MSC0CDR, 0, 1, 7, -1, -1, 31 },
> +		.gate = { CGU_REG_MSC0CDR, 31 },
> +	},
> +	[JZ4770_CLK_MMC1_MUX] = {
> +		"mmc1_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_MSC1CDR, 30, 1 },
> +		.div = { CGU_REG_MSC1CDR, 0, 1, 7, -1, -1, 31 },
> +		.gate = { CGU_REG_MSC1CDR, 31 },
> +	},
> +	[JZ4770_CLK_MMC2_MUX] = {
> +		"mmc2_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_MSC2CDR, 30, 1 },
> +		.div = { CGU_REG_MSC2CDR, 0, 1, 7, -1, -1, 31 },
> +		.gate = { CGU_REG_MSC2CDR, 31 },
> +	},
> +	[JZ4770_CLK_CIM] = {
> +		"cim", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_CIMCDR, 31, 1 },
> +		.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 26 },
> +	},
> +	[JZ4770_CLK_UHC] = {
> +		"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_UHCCDR, 29, 1 },
> +		.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 24 },
> +	},
> +	[JZ4770_CLK_GPU] = {
> +		"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, -1 },
> +		.mux = { CGU_REG_GPUCDR, 31, 1 },
> +		.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR1, 9 },
> +	},
> +	[JZ4770_CLK_BCH] = {
> +		"bch", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_BCHCDR, 31, 1 },
> +		.div = { CGU_REG_BCHCDR, 0, 1, 3, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 1 },
> +	},
> +	[JZ4770_CLK_LPCLK_MUX] = {
> +		"lpclk", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_LPCDR, 29, 1 },
> +		.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 28 },
> +	},
> +	[JZ4770_CLK_GPS] = {
> +		"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_GPSCDR, 31, 1 },
> +		.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 22 },
> +	},
> +
> +	/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
> +
> +	[JZ4770_CLK_SSI_MUX] = {
> +		"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_SSICDR, 30, 2 },
> +		.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1 },
> +	},
> +	[JZ4770_CLK_PCM_MUX] = {
> +		"pcm_mux", CGU_CLK_DIV | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_PCMCDR, 30, 2 },
> +		.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1 },
> +	},
> +	[JZ4770_CLK_I2S] = {
> +		"i2s", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_I2SCDR, 30, 2 },
> +		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR1, 13 },
> +	},
> +	[JZ4770_CLK_OTG] = {
> +		"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_USBCDR, 30, 2 },
> +		.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 2 },
> +	},
> +
> +	/* Gate-only clocks */
> +
> +	[JZ4770_CLK_SSI0] = {
> +		"ssi0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_SSI_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 4 },
> +	},
> +	[JZ4770_CLK_SSI1] = {
> +		"ssi1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_SSI_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 19 },
> +	},
> +	[JZ4770_CLK_SSI2] = {
> +		"ssi2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_SSI_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 20 },
> +	},
> +	[JZ4770_CLK_PCM0] = {
> +		"pcm0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_PCM_MUX, },
> +		.gate = { CGU_REG_CLKGR1, 8 },
> +	},
> +	[JZ4770_CLK_PCM1] = {
> +		"pcm1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_PCM_MUX, },
> +		.gate = { CGU_REG_CLKGR1, 10 },
> +	},
> +	[JZ4770_CLK_DMA] = {
> +		"dma", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_H2CLK, },
> +		.gate = { CGU_REG_CLKGR0, 21 },
> +	},
> +	[JZ4770_CLK_I2C0] = {
> +		"i2c0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 5 },
> +	},
> +	[JZ4770_CLK_I2C1] = {
> +		"i2c1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 6 },
> +	},
> +	[JZ4770_CLK_I2C2] = {
> +		"i2c2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR1, 15 },
> +	},
> +	[JZ4770_CLK_UART0] = {
> +		"uart0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 15 },
> +	},
> +	[JZ4770_CLK_UART1] = {
> +		"uart1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 16 },
> +	},
> +	[JZ4770_CLK_UART2] = {
> +		"uart2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 17 },
> +	},
> +	[JZ4770_CLK_UART3] = {
> +		"uart3", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 18 },
> +	},
> +	[JZ4770_CLK_IPU] = {
> +		"ipu", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_H0CLK, },
> +		.gate = { CGU_REG_CLKGR0, 29 },
> +	},
> +	[JZ4770_CLK_ADC] = {
> +		"adc", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 14 },
> +	},
> +	[JZ4770_CLK_AIC] = {
> +		"aic", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 8 },
> +	},
> +	[JZ4770_CLK_AUX] = {
> +		"aux", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_C1CLK, },
> +		.gate = { CGU_REG_CLKGR1, 14 },
> +	},
> +	[JZ4770_CLK_VPU] = {
> +		"vpu", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_H1CLK, },
> +		.gate = { CGU_REG_CLKGR1, 7 },
> +	},
> +	[JZ4770_CLK_MMC0] = {
> +		"mmc0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_MMC0_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 3 },
> +	},
> +	[JZ4770_CLK_MMC1] = {
> +		"mmc1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_MMC1_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 11 },
> +	},
> +	[JZ4770_CLK_MMC2] = {
> +		"mmc2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_MMC2_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 12 },
> +	},
> +
> +	/* Custom clocks */
> +
> +	[JZ4770_CLK_UHC_PHY] = {
> +		"uhc_phy", CGU_CLK_CUSTOM,
> +		.parents = { JZ4770_CLK_UHC, -1, -1, -1 },
> +		.custom = { &jz4770_uhc_phy_ops },
> +	},
> +	[JZ4770_CLK_OTG_PHY] = {
> +		"usb_phy", CGU_CLK_CUSTOM,
> +		.parents = { JZ4770_CLK_OTG, -1, -1, -1 },
> +		.custom = { &jz4770_otg_phy_ops },
> +	},
> +
> +	[JZ4770_CLK_EXT512] = {
> +		"ext/512", CGU_CLK_FIXDIV,
> +		.parents = { JZ4770_CLK_EXT },
> +		.fixdiv = { 512 },
> +	},
> +
> +	[JZ4770_CLK_RTC] = {
> +		"rtc", CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT512, JZ4770_CLK_OSC32K, },
> +		.mux = { CGU_REG_OPCR, 2, 1},
> +	},
> +};
> +
> +#if IS_ENABLED(CONFIG_PM_SLEEP)
> +static int jz4770_cgu_pm_suspend(void)
> +{
> +	u32 val;
> +
> +	val = readl(cgu->base + CGU_REG_LCR);
> +	writel(val | LCR_LPM, cgu->base + CGU_REG_LCR);
> +	return 0;
> +}
> +
> +static void jz4770_cgu_pm_resume(void)
> +{
> +	u32 val;
> +
> +	val = readl(cgu->base + CGU_REG_LCR);
> +	writel(val & ~LCR_LPM, cgu->base + CGU_REG_LCR);
> +}
> +
> +static struct syscore_ops jz4770_cgu_pm_ops = {
> +	.suspend = jz4770_cgu_pm_suspend,
> +	.resume = jz4770_cgu_pm_resume,
> +};
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static void __init jz4770_cgu_init(struct device_node *np)
> +{
> +	int retval;
> +
> +	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
> +			      ARRAY_SIZE(jz4770_cgu_clocks), np);
> +	if (!cgu)
> +		pr_err("%s: failed to initialise CGU\n", __func__);
> +
> +	retval = ingenic_cgu_register_clocks(cgu);
> +	if (retval)
> +		pr_err("%s: failed to register CGU Clocks\n", __func__);
> +
> +#if IS_ENABLED(CONFIG_PM_SLEEP)
> +	register_syscore_ops(&jz4770_cgu_pm_ops);
> +#endif
> +}
> +
> +/* We only probe via devicetree, no need for a platform driver */
> +CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-cgu", jz4770_cgu_init);
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 06/15] clk: Add Ingenic jz4770 CGU driver

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 16035 bytes --]

Hi Paul,

On Fri, Jan 05, 2018 at 07:25:04PM +0100, Paul Cercueil wrote:
> Add support for the clocks provided by the CGU in the Ingenic JZ4770
> SoC.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
>  drivers/clk/ingenic/Makefile     |   1 +
>  drivers/clk/ingenic/jz4770-cgu.c | 483 +++++++++++++++++++++++++++++++++++++++

Should this file and the jz4770-cgu.h header be added to a new
MAINTAINERS entry for this driver and/or for the platform as a whole?

Cheers
James

>  2 files changed, 484 insertions(+)
>  create mode 100644 drivers/clk/ingenic/jz4770-cgu.c
> 
>  v2: Make structures static const
>  v3: <dt-bindings/clock/jz4770-cgu.h> is now added in a separate patch
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: No change
> 
> diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
> index cd47b0664c2b..1456e4cdb562 100644
> --- a/drivers/clk/ingenic/Makefile
> +++ b/drivers/clk/ingenic/Makefile
> @@ -1,3 +1,4 @@
>  obj-y				+= cgu.o
>  obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
> +obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
>  obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
> diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
> new file mode 100644
> index 000000000000..c78d369b9403
> --- /dev/null
> +++ b/drivers/clk/ingenic/jz4770-cgu.c
> @@ -0,0 +1,483 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * JZ4770 SoC CGU driver
> + * Copyright 2018, Paul Cercueil <paul@crapouillou.net>
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/syscore_ops.h>
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +#include "cgu.h"
> +
> +/*
> + * CPM registers offset address definition
> + */
> +#define CGU_REG_CPCCR		0x00
> +#define CGU_REG_LCR		0x04
> +#define CGU_REG_CPPCR0		0x10
> +#define CGU_REG_CLKGR0		0x20
> +#define CGU_REG_OPCR		0x24
> +#define CGU_REG_CLKGR1		0x28
> +#define CGU_REG_CPPCR1		0x30
> +#define CGU_REG_USBPCR1		0x48
> +#define CGU_REG_USBCDR		0x50
> +#define CGU_REG_I2SCDR		0x60
> +#define CGU_REG_LPCDR		0x64
> +#define CGU_REG_MSC0CDR		0x68
> +#define CGU_REG_UHCCDR		0x6c
> +#define CGU_REG_SSICDR		0x74
> +#define CGU_REG_CIMCDR		0x7c
> +#define CGU_REG_GPSCDR		0x80
> +#define CGU_REG_PCMCDR		0x84
> +#define CGU_REG_GPUCDR		0x88
> +#define CGU_REG_MSC1CDR		0xA4
> +#define CGU_REG_MSC2CDR		0xA8
> +#define CGU_REG_BCHCDR		0xAC
> +
> +/* bits within the LCR register */
> +#define LCR_LPM			BIT(0)		/* Low Power Mode */
> +
> +/* bits within the OPCR register */
> +#define OPCR_SPENDH		BIT(5)		/* UHC PHY suspend */
> +#define OPCR_SPENDN		BIT(7)		/* OTG PHY suspend */
> +
> +/* bits within the USBPCR1 register */
> +#define USBPCR1_UHC_POWER	BIT(5)		/* UHC PHY power down */
> +
> +static struct ingenic_cgu *cgu;
> +
> +static int jz4770_uhc_phy_enable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
> +
> +	writel(readl(reg_opcr) & ~OPCR_SPENDH, reg_opcr);
> +	writel(readl(reg_usbpcr1) | USBPCR1_UHC_POWER, reg_usbpcr1);
> +	return 0;
> +}
> +
> +static void jz4770_uhc_phy_disable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
> +
> +	writel(readl(reg_usbpcr1) & ~USBPCR1_UHC_POWER, reg_usbpcr1);
> +	writel(readl(reg_opcr) | OPCR_SPENDH, reg_opcr);
> +}
> +
> +static int jz4770_uhc_phy_is_enabled(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
> +
> +	return !(readl(reg_opcr) & OPCR_SPENDH) &&
> +		(readl(reg_usbpcr1) & USBPCR1_UHC_POWER);
> +}
> +
> +static const struct clk_ops jz4770_uhc_phy_ops = {
> +	.enable = jz4770_uhc_phy_enable,
> +	.disable = jz4770_uhc_phy_disable,
> +	.is_enabled = jz4770_uhc_phy_is_enabled,
> +};
> +
> +static int jz4770_otg_phy_enable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +
> +	writel(readl(reg_opcr) | OPCR_SPENDN, reg_opcr);
> +
> +	/* Wait for the clock to be stable */
> +	udelay(50);
> +	return 0;
> +}
> +
> +static void jz4770_otg_phy_disable(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +
> +	writel(readl(reg_opcr) & ~OPCR_SPENDN, reg_opcr);
> +}
> +
> +static int jz4770_otg_phy_is_enabled(struct clk_hw *hw)
> +{
> +	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
> +
> +	return !!(readl(reg_opcr) & OPCR_SPENDN);
> +}
> +
> +static const struct clk_ops jz4770_otg_phy_ops = {
> +	.enable = jz4770_otg_phy_enable,
> +	.disable = jz4770_otg_phy_disable,
> +	.is_enabled = jz4770_otg_phy_is_enabled,
> +};
> +
> +static const s8 pll_od_encoding[8] = {
> +	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
> +};
> +
> +static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
> +
> +	/* External clocks */
> +
> +	[JZ4770_CLK_EXT] = { "ext", CGU_CLK_EXT },
> +	[JZ4770_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
> +
> +	/* PLLs */
> +
> +	[JZ4770_CLK_PLL0] = {
> +		"pll0", CGU_CLK_PLL,
> +		.parents = { JZ4770_CLK_EXT },
> +		.pll = {
> +			.reg = CGU_REG_CPPCR0,
> +			.m_shift = 24,
> +			.m_bits = 7,
> +			.m_offset = 1,
> +			.n_shift = 18,
> +			.n_bits = 5,
> +			.n_offset = 1,
> +			.od_shift = 16,
> +			.od_bits = 2,
> +			.od_max = 8,
> +			.od_encoding = pll_od_encoding,
> +			.bypass_bit = 9,
> +			.enable_bit = 8,
> +			.stable_bit = 10,
> +		},
> +	},
> +
> +	[JZ4770_CLK_PLL1] = {
> +		/* TODO: PLL1 can depend on PLL0 */
> +		"pll1", CGU_CLK_PLL,
> +		.parents = { JZ4770_CLK_EXT },
> +		.pll = {
> +			.reg = CGU_REG_CPPCR1,
> +			.m_shift = 24,
> +			.m_bits = 7,
> +			.m_offset = 1,
> +			.n_shift = 18,
> +			.n_bits = 5,
> +			.n_offset = 1,
> +			.od_shift = 16,
> +			.od_bits = 2,
> +			.od_max = 8,
> +			.od_encoding = pll_od_encoding,
> +			.enable_bit = 7,
> +			.stable_bit = 6,
> +			.no_bypass_bit = true,
> +		},
> +	},
> +
> +	/* Main clocks */
> +
> +	[JZ4770_CLK_CCLK] = {
> +		"cclk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_H0CLK] = {
> +		"h0clk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_H1CLK] = {
> +		"h1clk", CGU_CLK_DIV | CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1 },
> +		.gate = { CGU_REG_LCR, 30 },
> +	},
> +	[JZ4770_CLK_H2CLK] = {
> +		"h2clk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_C1CLK] = {
> +		"c1clk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1 },
> +	},
> +	[JZ4770_CLK_PCLK] = {
> +		"pclk", CGU_CLK_DIV,
> +		.parents = { JZ4770_CLK_PLL0, },
> +		.div = { CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1 },
> +	},
> +
> +	/* Those divided clocks can connect to PLL0 or PLL1 */
> +
> +	[JZ4770_CLK_MMC0_MUX] = {
> +		"mmc0_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_MSC0CDR, 30, 1 },
> +		.div = { CGU_REG_MSC0CDR, 0, 1, 7, -1, -1, 31 },
> +		.gate = { CGU_REG_MSC0CDR, 31 },
> +	},
> +	[JZ4770_CLK_MMC1_MUX] = {
> +		"mmc1_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_MSC1CDR, 30, 1 },
> +		.div = { CGU_REG_MSC1CDR, 0, 1, 7, -1, -1, 31 },
> +		.gate = { CGU_REG_MSC1CDR, 31 },
> +	},
> +	[JZ4770_CLK_MMC2_MUX] = {
> +		"mmc2_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_MSC2CDR, 30, 1 },
> +		.div = { CGU_REG_MSC2CDR, 0, 1, 7, -1, -1, 31 },
> +		.gate = { CGU_REG_MSC2CDR, 31 },
> +	},
> +	[JZ4770_CLK_CIM] = {
> +		"cim", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_CIMCDR, 31, 1 },
> +		.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 26 },
> +	},
> +	[JZ4770_CLK_UHC] = {
> +		"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_UHCCDR, 29, 1 },
> +		.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 24 },
> +	},
> +	[JZ4770_CLK_GPU] = {
> +		"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, -1 },
> +		.mux = { CGU_REG_GPUCDR, 31, 1 },
> +		.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR1, 9 },
> +	},
> +	[JZ4770_CLK_BCH] = {
> +		"bch", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_BCHCDR, 31, 1 },
> +		.div = { CGU_REG_BCHCDR, 0, 1, 3, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 1 },
> +	},
> +	[JZ4770_CLK_LPCLK_MUX] = {
> +		"lpclk", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_LPCDR, 29, 1 },
> +		.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 28 },
> +	},
> +	[JZ4770_CLK_GPS] = {
> +		"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
> +		.mux = { CGU_REG_GPSCDR, 31, 1 },
> +		.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 22 },
> +	},
> +
> +	/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
> +
> +	[JZ4770_CLK_SSI_MUX] = {
> +		"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_SSICDR, 30, 2 },
> +		.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1 },
> +	},
> +	[JZ4770_CLK_PCM_MUX] = {
> +		"pcm_mux", CGU_CLK_DIV | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_PCMCDR, 30, 2 },
> +		.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1 },
> +	},
> +	[JZ4770_CLK_I2S] = {
> +		"i2s", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_I2SCDR, 30, 2 },
> +		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR1, 13 },
> +	},
> +	[JZ4770_CLK_OTG] = {
> +		"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT, -1,
> +			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
> +		.mux = { CGU_REG_USBCDR, 30, 2 },
> +		.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
> +		.gate = { CGU_REG_CLKGR0, 2 },
> +	},
> +
> +	/* Gate-only clocks */
> +
> +	[JZ4770_CLK_SSI0] = {
> +		"ssi0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_SSI_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 4 },
> +	},
> +	[JZ4770_CLK_SSI1] = {
> +		"ssi1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_SSI_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 19 },
> +	},
> +	[JZ4770_CLK_SSI2] = {
> +		"ssi2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_SSI_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 20 },
> +	},
> +	[JZ4770_CLK_PCM0] = {
> +		"pcm0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_PCM_MUX, },
> +		.gate = { CGU_REG_CLKGR1, 8 },
> +	},
> +	[JZ4770_CLK_PCM1] = {
> +		"pcm1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_PCM_MUX, },
> +		.gate = { CGU_REG_CLKGR1, 10 },
> +	},
> +	[JZ4770_CLK_DMA] = {
> +		"dma", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_H2CLK, },
> +		.gate = { CGU_REG_CLKGR0, 21 },
> +	},
> +	[JZ4770_CLK_I2C0] = {
> +		"i2c0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 5 },
> +	},
> +	[JZ4770_CLK_I2C1] = {
> +		"i2c1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 6 },
> +	},
> +	[JZ4770_CLK_I2C2] = {
> +		"i2c2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR1, 15 },
> +	},
> +	[JZ4770_CLK_UART0] = {
> +		"uart0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 15 },
> +	},
> +	[JZ4770_CLK_UART1] = {
> +		"uart1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 16 },
> +	},
> +	[JZ4770_CLK_UART2] = {
> +		"uart2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 17 },
> +	},
> +	[JZ4770_CLK_UART3] = {
> +		"uart3", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 18 },
> +	},
> +	[JZ4770_CLK_IPU] = {
> +		"ipu", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_H0CLK, },
> +		.gate = { CGU_REG_CLKGR0, 29 },
> +	},
> +	[JZ4770_CLK_ADC] = {
> +		"adc", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 14 },
> +	},
> +	[JZ4770_CLK_AIC] = {
> +		"aic", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_EXT, },
> +		.gate = { CGU_REG_CLKGR0, 8 },
> +	},
> +	[JZ4770_CLK_AUX] = {
> +		"aux", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_C1CLK, },
> +		.gate = { CGU_REG_CLKGR1, 14 },
> +	},
> +	[JZ4770_CLK_VPU] = {
> +		"vpu", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_H1CLK, },
> +		.gate = { CGU_REG_CLKGR1, 7 },
> +	},
> +	[JZ4770_CLK_MMC0] = {
> +		"mmc0", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_MMC0_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 3 },
> +	},
> +	[JZ4770_CLK_MMC1] = {
> +		"mmc1", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_MMC1_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 11 },
> +	},
> +	[JZ4770_CLK_MMC2] = {
> +		"mmc2", CGU_CLK_GATE,
> +		.parents = { JZ4770_CLK_MMC2_MUX, },
> +		.gate = { CGU_REG_CLKGR0, 12 },
> +	},
> +
> +	/* Custom clocks */
> +
> +	[JZ4770_CLK_UHC_PHY] = {
> +		"uhc_phy", CGU_CLK_CUSTOM,
> +		.parents = { JZ4770_CLK_UHC, -1, -1, -1 },
> +		.custom = { &jz4770_uhc_phy_ops },
> +	},
> +	[JZ4770_CLK_OTG_PHY] = {
> +		"usb_phy", CGU_CLK_CUSTOM,
> +		.parents = { JZ4770_CLK_OTG, -1, -1, -1 },
> +		.custom = { &jz4770_otg_phy_ops },
> +	},
> +
> +	[JZ4770_CLK_EXT512] = {
> +		"ext/512", CGU_CLK_FIXDIV,
> +		.parents = { JZ4770_CLK_EXT },
> +		.fixdiv = { 512 },
> +	},
> +
> +	[JZ4770_CLK_RTC] = {
> +		"rtc", CGU_CLK_MUX,
> +		.parents = { JZ4770_CLK_EXT512, JZ4770_CLK_OSC32K, },
> +		.mux = { CGU_REG_OPCR, 2, 1},
> +	},
> +};
> +
> +#if IS_ENABLED(CONFIG_PM_SLEEP)
> +static int jz4770_cgu_pm_suspend(void)
> +{
> +	u32 val;
> +
> +	val = readl(cgu->base + CGU_REG_LCR);
> +	writel(val | LCR_LPM, cgu->base + CGU_REG_LCR);
> +	return 0;
> +}
> +
> +static void jz4770_cgu_pm_resume(void)
> +{
> +	u32 val;
> +
> +	val = readl(cgu->base + CGU_REG_LCR);
> +	writel(val & ~LCR_LPM, cgu->base + CGU_REG_LCR);
> +}
> +
> +static struct syscore_ops jz4770_cgu_pm_ops = {
> +	.suspend = jz4770_cgu_pm_suspend,
> +	.resume = jz4770_cgu_pm_resume,
> +};
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static void __init jz4770_cgu_init(struct device_node *np)
> +{
> +	int retval;
> +
> +	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
> +			      ARRAY_SIZE(jz4770_cgu_clocks), np);
> +	if (!cgu)
> +		pr_err("%s: failed to initialise CGU\n", __func__);
> +
> +	retval = ingenic_cgu_register_clocks(cgu);
> +	if (retval)
> +		pr_err("%s: failed to register CGU Clocks\n", __func__);
> +
> +#if IS_ENABLED(CONFIG_PM_SLEEP)
> +	register_syscore_ops(&jz4770_cgu_pm_ops);
> +#endif
> +}
> +
> +/* We only probe via devicetree, no need for a platform driver */
> +CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-cgu", jz4770_cgu_init);
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1899 bytes --]

On Fri, Jan 05, 2018 at 07:25:06PM +0100, Paul Cercueil wrote:
> From: Paul Burton <paul.burton@mips.com>
> 
> jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
> arcs_cmdline, up to argc (in fw_arg0). The common code in
> fw_init_cmdline will do the exact same thing when run on a system where
> fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
> use it). Remove the custom implementation & use the generic code.
> 
> Signed-off-by: Paul Burton <paul.burton@mips.com>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

> ---
>  arch/mips/jz4740/prom.c | 24 ++----------------------
>  1 file changed, 2 insertions(+), 22 deletions(-)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>  v6: Update Paul Burton's email address
> 
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index 47e857194ce6..a62dd8e6ecf9 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -20,33 +20,13 @@
>  #include <linux/serial_reg.h>
>  
>  #include <asm/bootinfo.h>
> +#include <asm/fw/fw.h>
>  #include <asm/mach-jz4740/base.h>
>  
> -static __init void jz4740_init_cmdline(int argc, char *argv[])
> -{
> -	unsigned int count = COMMAND_LINE_SIZE - 1;
> -	int i;
> -	char *dst = &(arcs_cmdline[0]);
> -	char *src;
> -
> -	for (i = 1; i < argc && count; ++i) {
> -		src = argv[i];
> -		while (*src && count) {
> -			*dst++ = *src++;
> -			--count;
> -		}
> -		*dst++ = ' ';
> -	}
> -	if (i > 1)
> -		--dst;
> -
> -	*dst = 0;
> -}
> -
>  void __init prom_init(void)
>  {
> -	jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
>  	mips_machtype = MACH_INGENIC_JZ4740;
> +	fw_init_cmdline();
>  }
>  
>  void __init prom_free_prom_memory(void)
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 08/15] MIPS: ingenic: Use common cmdline handling code

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1899 bytes --]

On Fri, Jan 05, 2018 at 07:25:06PM +0100, Paul Cercueil wrote:
> From: Paul Burton <paul.burton@mips.com>
> 
> jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
> arcs_cmdline, up to argc (in fw_arg0). The common code in
> fw_init_cmdline will do the exact same thing when run on a system where
> fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
> use it). Remove the custom implementation & use the generic code.
> 
> Signed-off-by: Paul Burton <paul.burton@mips.com>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

> ---
>  arch/mips/jz4740/prom.c | 24 ++----------------------
>  1 file changed, 2 insertions(+), 22 deletions(-)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>  v6: Update Paul Burton's email address
> 
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index 47e857194ce6..a62dd8e6ecf9 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -20,33 +20,13 @@
>  #include <linux/serial_reg.h>
>  
>  #include <asm/bootinfo.h>
> +#include <asm/fw/fw.h>
>  #include <asm/mach-jz4740/base.h>
>  
> -static __init void jz4740_init_cmdline(int argc, char *argv[])
> -{
> -	unsigned int count = COMMAND_LINE_SIZE - 1;
> -	int i;
> -	char *dst = &(arcs_cmdline[0]);
> -	char *src;
> -
> -	for (i = 1; i < argc && count; ++i) {
> -		src = argv[i];
> -		while (*src && count) {
> -			*dst++ = *src++;
> -			--count;
> -		}
> -		*dst++ = ' ';
> -	}
> -	if (i > 1)
> -		--dst;
> -
> -	*dst = 0;
> -}
> -
>  void __init prom_init(void)
>  {
> -	jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
>  	mips_machtype = MACH_INGENIC_JZ4740;
> +	fw_init_cmdline();
>  }
>  
>  void __init prom_free_prom_memory(void)
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Fri, Jan 05, 2018 at 07:25:07PM +0100, Paul Cercueil wrote:
> Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
> newly supported JZ4770 SoC.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Reviewed-by: James Hogan <jhogan@kernel.org>

Though perhaps its time for an enum.

Cheers
James

> ---
>  arch/mips/include/asm/bootinfo.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>  v6: No change
> 
> diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
> index e26a093bb17a..a301a8f4bc66 100644
> --- a/arch/mips/include/asm/bootinfo.h
> +++ b/arch/mips/include/asm/bootinfo.h
> @@ -79,6 +79,8 @@ enum loongson_machine_type {
>   */
>  #define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
>  #define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
> +#define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
> +#define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
>  
>  extern char *system_type;
>  const char *get_system_type(void);
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 09/15] MIPS: platform: add machtype IDs for more Ingenic SoCs

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

On Fri, Jan 05, 2018 at 07:25:07PM +0100, Paul Cercueil wrote:
> Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
> newly supported JZ4770 SoC.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

Reviewed-by: James Hogan <jhogan@kernel.org>

Though perhaps its time for an enum.

Cheers
James

> ---
>  arch/mips/include/asm/bootinfo.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>  v6: No change
> 
> diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
> index e26a093bb17a..a301a8f4bc66 100644
> --- a/arch/mips/include/asm/bootinfo.h
> +++ b/arch/mips/include/asm/bootinfo.h
> @@ -79,6 +79,8 @@ enum loongson_machine_type {
>   */
>  #define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
>  #define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
> +#define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
> +#define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
>  
>  extern char *system_type;
>  const char *get_system_type(void);
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 2548 bytes --]

On Fri, Jan 05, 2018 at 07:25:08PM +0100, Paul Cercueil wrote:
> Previously, the mips_machtype variable was always initialized
> to MACH_INGENIC_JZ4740 even if running on different SoCs.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/jz4740/prom.c  |  1 -
>  arch/mips/jz4740/setup.c | 26 ++++++++++++++++++++++----
>  2 files changed, 22 insertions(+), 5 deletions(-)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: Init mips_machtype from DT compatible string instead of using
>      MIPS_MACHINE
> 
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index a62dd8e6ecf9..eb9f2f97bedb 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -25,7 +25,6 @@
>  
>  void __init prom_init(void)
>  {
> -	mips_machtype = MACH_INGENIC_JZ4740;
>  	fw_init_cmdline();
>  }
>  
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index 6d0152321819..cd89536fbba1 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -53,16 +53,30 @@ static void __init jz4740_detect_mem(void)
>  	add_memory_region(0, size, BOOT_MEM_RAM);
>  }
>  
> +static unsigned long __init get_board_mach_type(const void *fdt)
> +{
> +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
> +		return MACH_INGENIC_JZ4780;
> +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
> +		return MACH_INGENIC_JZ4770;
> +
> +	return MACH_INGENIC_JZ4740;
> +}
> +
>  void __init plat_mem_setup(void)
>  {
>  	int offset;
>  
> +	if (!early_init_dt_scan(__dtb_start))
> +		return;
> +
>  	jz4740_reset_init();
> -	__dt_setup_arch(__dtb_start);

Is it intentional that by removing this we no longer set the machine
name, so it'll default to "unknown"? The commit message doesn't mention
that change.

Cheers
James


>  
>  	offset = fdt_path_offset(__dtb_start, "/memory");
>  	if (offset < 0)
>  		jz4740_detect_mem();
> +
> +	mips_machtype = get_board_mach_type(__dtb_start);
>  }
>  
>  void __init device_tree_init(void)
> @@ -75,10 +89,14 @@ void __init device_tree_init(void)
>  
>  const char *get_system_type(void)
>  {
> -	if (IS_ENABLED(CONFIG_MACH_JZ4780))
> +	switch (mips_machtype) {
> +	case MACH_INGENIC_JZ4780:
>  		return "JZ4780";
> -
> -	return "JZ4740";
> +	case MACH_INGENIC_JZ4770:
> +		return "JZ4770";
> +	default:
> +		return "JZ4740";
> +	}
>  }
>  
>  void __init arch_init_irq(void)
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 2548 bytes --]

On Fri, Jan 05, 2018 at 07:25:08PM +0100, Paul Cercueil wrote:
> Previously, the mips_machtype variable was always initialized
> to MACH_INGENIC_JZ4740 even if running on different SoCs.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/jz4740/prom.c  |  1 -
>  arch/mips/jz4740/setup.c | 26 ++++++++++++++++++++++----
>  2 files changed, 22 insertions(+), 5 deletions(-)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: Init mips_machtype from DT compatible string instead of using
>      MIPS_MACHINE
> 
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index a62dd8e6ecf9..eb9f2f97bedb 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -25,7 +25,6 @@
>  
>  void __init prom_init(void)
>  {
> -	mips_machtype = MACH_INGENIC_JZ4740;
>  	fw_init_cmdline();
>  }
>  
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index 6d0152321819..cd89536fbba1 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -53,16 +53,30 @@ static void __init jz4740_detect_mem(void)
>  	add_memory_region(0, size, BOOT_MEM_RAM);
>  }
>  
> +static unsigned long __init get_board_mach_type(const void *fdt)
> +{
> +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
> +		return MACH_INGENIC_JZ4780;
> +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
> +		return MACH_INGENIC_JZ4770;
> +
> +	return MACH_INGENIC_JZ4740;
> +}
> +
>  void __init plat_mem_setup(void)
>  {
>  	int offset;
>  
> +	if (!early_init_dt_scan(__dtb_start))
> +		return;
> +
>  	jz4740_reset_init();
> -	__dt_setup_arch(__dtb_start);

Is it intentional that by removing this we no longer set the machine
name, so it'll default to "unknown"? The commit message doesn't mention
that change.

Cheers
James


>  
>  	offset = fdt_path_offset(__dtb_start, "/memory");
>  	if (offset < 0)
>  		jz4740_detect_mem();
> +
> +	mips_machtype = get_board_mach_type(__dtb_start);
>  }
>  
>  void __init device_tree_init(void)
> @@ -75,10 +89,14 @@ void __init device_tree_init(void)
>  
>  const char *get_system_type(void)
>  {
> -	if (IS_ENABLED(CONFIG_MACH_JZ4780))
> +	switch (mips_machtype) {
> +	case MACH_INGENIC_JZ4780:
>  		return "JZ4780";
> -
> -	return "JZ4740";
> +	case MACH_INGENIC_JZ4770:
> +		return "JZ4770";
> +	default:
> +		return "JZ4740";
> +	}
>  }
>  
>  void __init arch_init_irq(void)
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 6865 bytes --]

On Fri, Jan 05, 2018 at 07:25:09PM +0100, Paul Cercueil wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
> ---
>  arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
>  arch/mips/jz4740/Kconfig               |   6 +
>  arch/mips/jz4740/time.c                |   2 +-
>  3 files changed, 219 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi

We should probably have a MAINTAINERS entry including this file. Same
goes for the GC0 files added in the last patch.

Cheers
James

> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: No change
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> new file mode 100644
> index 000000000000..7c2804f3f5f1
> --- /dev/null
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "ingenic,jz4770";
> +
> +	cpuintc: interrupt-controller {
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +		interrupt-controller;
> +		compatible = "mti,cpu-interrupt-controller";
> +	};
> +
> +	intc: interrupt-controller@10001000 {
> +		compatible = "ingenic,jz4770-intc";
> +		reg = <0x10001000 0x40>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		interrupt-parent = <&cpuintc>;
> +		interrupts = <2>;
> +	};
> +
> +	ext: ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +	};
> +
> +	osc32k: osc32k {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +	};
> +
> +	cgu: jz4770-cgu@10000000 {
> +		compatible = "ingenic,jz4770-cgu";
> +		reg = <0x10000000 0x100>;
> +
> +		clocks = <&ext>, <&osc32k>;
> +		clock-names = "ext", "osc32k";
> +
> +		#clock-cells = <1>;
> +	};
> +
> +	pinctrl: pin-controller@10010000 {
> +		compatible = "ingenic,jz4770-pinctrl";
> +		reg = <0x10010000 0x600>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		gpa: gpio@0 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <0>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 0 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <17>;
> +		};
> +
> +		gpb: gpio@1 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <1>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 32 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <16>;
> +		};
> +
> +		gpc: gpio@2 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <2>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 64 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <15>;
> +		};
> +
> +		gpd: gpio@3 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <3>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 96 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <14>;
> +		};
> +
> +		gpe: gpio@4 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <4>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 128 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <13>;
> +		};
> +
> +		gpf: gpio@5 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <5>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 160 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <12>;
> +		};
> +	};
> +
> +	uart0: serial@10030000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10030000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <5>;
> +
> +		status = "disabled";
> +	};
> +
> +	uart1: serial@10031000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10031000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <4>;
> +
> +		status = "disabled";
> +	};
> +
> +	uart2: serial@10032000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10032000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <3>;
> +
> +		status = "disabled";
> +	};
> +
> +	uart3: serial@10033000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10033000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <2>;
> +
> +		status = "disabled";
> +	};
> +
> +	uhc: uhc@13430000 {
> +		compatible = "generic-ohci";
> +		reg = <0x13430000 0x1000>;
> +
> +		clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
> +		assigned-clocks = <&cgu JZ4770_CLK_UHC>;
> +		assigned-clock-rates = <48000000>;
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <20>;
> +
> +		status = "disabled";
> +	};
> +};
> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
> index 643af2012e14..29a9361a2b77 100644
> --- a/arch/mips/jz4740/Kconfig
> +++ b/arch/mips/jz4740/Kconfig
> @@ -18,6 +18,12 @@ config MACH_JZ4740
>  	bool
>  	select SYS_HAS_CPU_MIPS32_R1
>  
> +config MACH_JZ4770
> +	bool
> +	select MIPS_CPU_SCACHE
> +	select SYS_HAS_CPU_MIPS32_R2
> +	select SYS_SUPPORTS_HIGHMEM
> +
>  config MACH_JZ4780
>  	bool
>  	select MIPS_CPU_SCACHE
> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
>  #ifdef CONFIG_MACH_JZ4740
>  	.irq = JZ4740_IRQ_TCU0,
>  #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>  	.irq = JZ4780_IRQ_TCU2,
>  #endif
>  };
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 11/15] MIPS: ingenic: Initial JZ4770 support

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 6865 bytes --]

On Fri, Jan 05, 2018 at 07:25:09PM +0100, Paul Cercueil wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
> ---
>  arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
>  arch/mips/jz4740/Kconfig               |   6 +
>  arch/mips/jz4740/time.c                |   2 +-
>  3 files changed, 219 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi

We should probably have a MAINTAINERS entry including this file. Same
goes for the GC0 files added in the last patch.

Cheers
James

> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: No change
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> new file mode 100644
> index 000000000000..7c2804f3f5f1
> --- /dev/null
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/clock/jz4770-cgu.h>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "ingenic,jz4770";
> +
> +	cpuintc: interrupt-controller {
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +		interrupt-controller;
> +		compatible = "mti,cpu-interrupt-controller";
> +	};
> +
> +	intc: interrupt-controller@10001000 {
> +		compatible = "ingenic,jz4770-intc";
> +		reg = <0x10001000 0x40>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		interrupt-parent = <&cpuintc>;
> +		interrupts = <2>;
> +	};
> +
> +	ext: ext {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +	};
> +
> +	osc32k: osc32k {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +	};
> +
> +	cgu: jz4770-cgu@10000000 {
> +		compatible = "ingenic,jz4770-cgu";
> +		reg = <0x10000000 0x100>;
> +
> +		clocks = <&ext>, <&osc32k>;
> +		clock-names = "ext", "osc32k";
> +
> +		#clock-cells = <1>;
> +	};
> +
> +	pinctrl: pin-controller@10010000 {
> +		compatible = "ingenic,jz4770-pinctrl";
> +		reg = <0x10010000 0x600>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		gpa: gpio@0 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <0>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 0 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <17>;
> +		};
> +
> +		gpb: gpio@1 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <1>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 32 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <16>;
> +		};
> +
> +		gpc: gpio@2 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <2>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 64 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <15>;
> +		};
> +
> +		gpd: gpio@3 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <3>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 96 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <14>;
> +		};
> +
> +		gpe: gpio@4 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <4>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 128 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <13>;
> +		};
> +
> +		gpf: gpio@5 {
> +			compatible = "ingenic,jz4770-gpio";
> +			reg = <5>;
> +
> +			gpio-controller;
> +			gpio-ranges = <&pinctrl 0 160 32>;
> +			#gpio-cells = <2>;
> +
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			interrupt-parent = <&intc>;
> +			interrupts = <12>;
> +		};
> +	};
> +
> +	uart0: serial@10030000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10030000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <5>;
> +
> +		status = "disabled";
> +	};
> +
> +	uart1: serial@10031000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10031000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <4>;
> +
> +		status = "disabled";
> +	};
> +
> +	uart2: serial@10032000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10032000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <3>;
> +
> +		status = "disabled";
> +	};
> +
> +	uart3: serial@10033000 {
> +		compatible = "ingenic,jz4770-uart";
> +		reg = <0x10033000 0x100>;
> +
> +		clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
> +		clock-names = "baud", "module";
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <2>;
> +
> +		status = "disabled";
> +	};
> +
> +	uhc: uhc@13430000 {
> +		compatible = "generic-ohci";
> +		reg = <0x13430000 0x1000>;
> +
> +		clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
> +		assigned-clocks = <&cgu JZ4770_CLK_UHC>;
> +		assigned-clock-rates = <48000000>;
> +
> +		interrupt-parent = <&intc>;
> +		interrupts = <20>;
> +
> +		status = "disabled";
> +	};
> +};
> diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
> index 643af2012e14..29a9361a2b77 100644
> --- a/arch/mips/jz4740/Kconfig
> +++ b/arch/mips/jz4740/Kconfig
> @@ -18,6 +18,12 @@ config MACH_JZ4740
>  	bool
>  	select SYS_HAS_CPU_MIPS32_R1
>  
> +config MACH_JZ4770
> +	bool
> +	select MIPS_CPU_SCACHE
> +	select SYS_HAS_CPU_MIPS32_R2
> +	select SYS_SUPPORTS_HIGHMEM
> +
>  config MACH_JZ4780
>  	bool
>  	select MIPS_CPU_SCACHE
> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
>  #ifdef CONFIG_MACH_JZ4740
>  	.irq = JZ4740_IRQ_TCU0,
>  #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>  	.irq = JZ4780_IRQ_TCU2,
>  #endif
>  };
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1484 bytes --]

On Fri, Jan 05, 2018 at 07:25:10PM +0100, Paul Cercueil wrote:
> From: Maarten ter Huurne <maarten@treewalker.org>
> 
> According to config2, the associativity would be 5-ways, but the
> documentation states 4-ways, which also matches the documented
> L2 cache size of 256 kB.
> 
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>

Hehe, nice

Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

> ---
>  arch/mips/mm/sc-mips.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
>  v2: No change
>  v3: No change
>  v4: Rebased on top of Linux 4.15-rc5
>  v5: No change
>  v6: No change
> 
> diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
> index 548acb7f8557..394673991bab 100644
> --- a/arch/mips/mm/sc-mips.c
> +++ b/arch/mips/mm/sc-mips.c
> @@ -16,6 +16,7 @@
>  #include <asm/mmu_context.h>
>  #include <asm/r4kcache.h>
>  #include <asm/mips-cps.h>
> +#include <asm/bootinfo.h>
>  
>  /*
>   * MIPS32/MIPS64 L2 cache handling
> @@ -220,6 +221,14 @@ static inline int __init mips_sc_probe(void)
>  	else
>  		return 0;
>  
> +	/*
> +	 * According to config2 it would be 5-ways, but that is contradicted
> +	 * by all documentation.
> +	 */
> +	if (current_cpu_type() == CPU_JZRISC &&
> +				mips_machtype == MACH_INGENIC_JZ4770)
> +		c->scache.ways = 4;
> +
>  	c->scache.waysize = c->scache.sets * c->scache.linesz;
>  	c->scache.waybit = __ffs(c->scache.waysize);
>  
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 12/15] MIPS: JZ4770: Work around config2 misreporting associativity

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1484 bytes --]

On Fri, Jan 05, 2018 at 07:25:10PM +0100, Paul Cercueil wrote:
> From: Maarten ter Huurne <maarten@treewalker.org>
> 
> According to config2, the associativity would be 5-ways, but the
> documentation states 4-ways, which also matches the documented
> L2 cache size of 256 kB.
> 
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>

Hehe, nice

Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

> ---
>  arch/mips/mm/sc-mips.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
>  v2: No change
>  v3: No change
>  v4: Rebased on top of Linux 4.15-rc5
>  v5: No change
>  v6: No change
> 
> diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
> index 548acb7f8557..394673991bab 100644
> --- a/arch/mips/mm/sc-mips.c
> +++ b/arch/mips/mm/sc-mips.c
> @@ -16,6 +16,7 @@
>  #include <asm/mmu_context.h>
>  #include <asm/r4kcache.h>
>  #include <asm/mips-cps.h>
> +#include <asm/bootinfo.h>
>  
>  /*
>   * MIPS32/MIPS64 L2 cache handling
> @@ -220,6 +221,14 @@ static inline int __init mips_sc_probe(void)
>  	else
>  		return 0;
>  
> +	/*
> +	 * According to config2 it would be 5-ways, but that is contradicted
> +	 * by all documentation.
> +	 */
> +	if (current_cpu_type() == CPU_JZRISC &&
> +				mips_machtype == MACH_INGENIC_JZ4770)
> +		c->scache.ways = 4;
> +
>  	c->scache.waysize = c->scache.sets * c->scache.linesz;
>  	c->scache.waybit = __ffs(c->scache.waysize);
>  
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support

[Paul Cercueil]

Hi Philippe,

Le dim. 7 janv. 2018 à 17:18, Philippe Ombredanne 
<pombredanne@nexb.com> a écrit :
> On Fri, Jan 5, 2018 at 7:25 PM, Paul Cercueil <paul@crapouillou.net> 
> wrote:
>>  The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
>>  handheld game console, successfully kickstarted in ~2012, running 
>> Linux.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  Acked-by: Mathieu Malaterre <malat@debian.org>
>>  ---
>>   arch/mips/boot/dts/ingenic/Makefile |  1 +
>>   arch/mips/boot/dts/ingenic/gcw0.dts | 62 
>> +++++++++++++++++++++++++++++++++++++
>>   arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
>>   arch/mips/jz4740/Kconfig            |  4 +++
>>   4 files changed, 94 insertions(+)
>>   create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
>>   create mode 100644 arch/mips/configs/gcw0_defconfig
>> 
>>   v2: No change
>>   v3: No change
>>   v4: No change
>>   v5: Use SPDX license identifier
>>       Drop custom CROSS_COMPILE from defconfig
>>   v6: Add "model" property in devicetree
> 
> For the use of SPDX tags for the whole patch set: thank you!
> 
> Acked-by: Philippe Ombredanne <pombredanne@nexb.com>

Is your Acked-by for the whole patchset? Or just this one patch?

-Paul

Re: [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 2656 bytes --]

On Fri, Jan 05, 2018 at 07:25:11PM +0100, Paul Cercueil wrote:
> From: Maarten ter Huurne <maarten@treewalker.org>
> 
> We have seen MMC DMA transfers read corrupted data from SDRAM when
> a burst interval ends at physical address 0x10000000. To avoid this
> problem, we remove the final page of low memory from the memory map.
> 
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
> ---
>  arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
>  arch/mips/kernel/setup.c |  8 ++++++++
>  2 files changed, 32 insertions(+)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>  v6: No change
> 
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index cd89536fbba1..18c57c4bf47e 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -22,6 +22,7 @@
>  #include <linux/of_fdt.h>
>  
>  #include <asm/bootinfo.h>
> +#include <asm/page.h>
>  #include <asm/prom.h>
>  
>  #include <asm/mach-jz4740/base.h>
> @@ -103,3 +104,26 @@ void __init arch_init_irq(void)
>  {
>  	irqchip_init();
>  }
> +
> +/*
> + * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
> + * interval ends at physical address 0x10000000. To avoid this problem, we
> + * remove the final page of low memory from the memory map.
> + */
> +void __init jz4770_reserve_unsafe_for_dma(void)
> +{
> +	int i;
> +
> +	for (i = 0; i < boot_mem_map.nr_map; i++) {
> +		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
> +
> +		if (entry->type != BOOT_MEM_RAM)
> +			continue;
> +
> +		if (entry->addr + entry->size != 0x10000000)
> +			continue;
> +
> +		entry->size -= PAGE_SIZE;
> +		break;
> +	}
> +}
> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
> index 85bc601e9a0d..5a2c20145aee 100644
> --- a/arch/mips/kernel/setup.c
> +++ b/arch/mips/kernel/setup.c
> @@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
>  
>  	parse_early_param();
>  
> +#ifdef CONFIG_MACH_JZ4770
> +	if (current_cpu_type() == CPU_JZRISC &&
> +				mips_machtype == MACH_INGENIC_JZ4770) {
> +		extern void __init jz4770_reserve_unsafe_for_dma(void);
> +		jz4770_reserve_unsafe_for_dma();
> +	}
> +#endif

Hmm, a little bit ugly. I'm guessing the plat_mem_setup() callback is
too early since mem= parameters won't have been taken into account yet
from parse_early_param().

Is /memreserve/ in FDT of any value here or is it all too late due to
old DTs?

Cheers
James

> +
>  	if (usermem) {
>  		pr_info("User-defined physical RAM map:\n");
>  		print_memory_map();
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 2656 bytes --]

On Fri, Jan 05, 2018 at 07:25:11PM +0100, Paul Cercueil wrote:
> From: Maarten ter Huurne <maarten@treewalker.org>
> 
> We have seen MMC DMA transfers read corrupted data from SDRAM when
> a burst interval ends at physical address 0x10000000. To avoid this
> problem, we remove the final page of low memory from the memory map.
> 
> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
> ---
>  arch/mips/jz4740/setup.c | 24 ++++++++++++++++++++++++
>  arch/mips/kernel/setup.c |  8 ++++++++
>  2 files changed, 32 insertions(+)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: No change
>  v6: No change
> 
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index cd89536fbba1..18c57c4bf47e 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -22,6 +22,7 @@
>  #include <linux/of_fdt.h>
>  
>  #include <asm/bootinfo.h>
> +#include <asm/page.h>
>  #include <asm/prom.h>
>  
>  #include <asm/mach-jz4740/base.h>
> @@ -103,3 +104,26 @@ void __init arch_init_irq(void)
>  {
>  	irqchip_init();
>  }
> +
> +/*
> + * We have seen MMC DMA transfers read corrupted data from SDRAM when a burst
> + * interval ends at physical address 0x10000000. To avoid this problem, we
> + * remove the final page of low memory from the memory map.
> + */
> +void __init jz4770_reserve_unsafe_for_dma(void)
> +{
> +	int i;
> +
> +	for (i = 0; i < boot_mem_map.nr_map; i++) {
> +		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
> +
> +		if (entry->type != BOOT_MEM_RAM)
> +			continue;
> +
> +		if (entry->addr + entry->size != 0x10000000)
> +			continue;
> +
> +		entry->size -= PAGE_SIZE;
> +		break;
> +	}
> +}
> diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
> index 85bc601e9a0d..5a2c20145aee 100644
> --- a/arch/mips/kernel/setup.c
> +++ b/arch/mips/kernel/setup.c
> @@ -879,6 +879,14 @@ static void __init arch_mem_init(char **cmdline_p)
>  
>  	parse_early_param();
>  
> +#ifdef CONFIG_MACH_JZ4770
> +	if (current_cpu_type() == CPU_JZRISC &&
> +				mips_machtype == MACH_INGENIC_JZ4770) {
> +		extern void __init jz4770_reserve_unsafe_for_dma(void);
> +		jz4770_reserve_unsafe_for_dma();
> +	}
> +#endif

Hmm, a little bit ugly. I'm guessing the plat_mem_setup() callback is
too early since mem= parameters won't have been taken into account yet
from parse_early_param().

Is /memreserve/ in FDT of any value here or is it all too late due to
old DTs?

Cheers
James

> +
>  	if (usermem) {
>  		pr_info("User-defined physical RAM map:\n");
>  		print_memory_map();
> -- 
> 2.11.0
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 10/15] MIPS: ingenic: Detect machtype from SoC compatible string

[Paul Cercueil]

Hi James,

Le mer. 10 janv. 2018 à 23:27, James Hogan <james.hogan@mips.com> a 
écrit :
> On Fri, Jan 05, 2018 at 07:25:08PM +0100, Paul Cercueil wrote:
>>  Previously, the mips_machtype variable was always initialized
>>  to MACH_INGENIC_JZ4740 even if running on different SoCs.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  ---
>>   arch/mips/jz4740/prom.c  |  1 -
>>   arch/mips/jz4740/setup.c | 26 ++++++++++++++++++++++----
>>   2 files changed, 22 insertions(+), 5 deletions(-)
>> 
>>   v2: No change
>>   v3: No change
>>   v4: No change
>>   v5: Use SPDX license identifier
>>   v6: Init mips_machtype from DT compatible string instead of using
>>       MIPS_MACHINE
>> 
>>  diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
>>  index a62dd8e6ecf9..eb9f2f97bedb 100644
>>  --- a/arch/mips/jz4740/prom.c
>>  +++ b/arch/mips/jz4740/prom.c
>>  @@ -25,7 +25,6 @@
>> 
>>   void __init prom_init(void)
>>   {
>>  -	mips_machtype = MACH_INGENIC_JZ4740;
>>   	fw_init_cmdline();
>>   }
>> 
>>  diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
>>  index 6d0152321819..cd89536fbba1 100644
>>  --- a/arch/mips/jz4740/setup.c
>>  +++ b/arch/mips/jz4740/setup.c
>>  @@ -53,16 +53,30 @@ static void __init jz4740_detect_mem(void)
>>   	add_memory_region(0, size, BOOT_MEM_RAM);
>>   }
>> 
>>  +static unsigned long __init get_board_mach_type(const void *fdt)
>>  +{
>>  +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
>>  +		return MACH_INGENIC_JZ4780;
>>  +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
>>  +		return MACH_INGENIC_JZ4770;
>>  +
>>  +	return MACH_INGENIC_JZ4740;
>>  +}
>>  +
>>   void __init plat_mem_setup(void)
>>   {
>>   	int offset;
>> 
>>  +	if (!early_init_dt_scan(__dtb_start))
>>  +		return;
>>  +
>>   	jz4740_reset_init();
>>  -	__dt_setup_arch(__dtb_start);
> 
> Is it intentional that by removing this we no longer set the machine
> name, so it'll default to "unknown"? The commit message doesn't 
> mention
> that change.
> 
> Cheers
> James

You're right, thank you for spotting that. I'll send a revised version 
ASAP.

-Paul

Re: [PATCH v6 13/15] MIPS: JZ4770: Workaround for corrupted DMA transfers

[Paul Cercueil]

Hi James,

Le jeu. 11 janv. 2018 à 0:20, James Hogan <james.hogan@mips.com> a 
écrit :
> On Fri, Jan 05, 2018 at 07:25:11PM +0100, Paul Cercueil wrote:
>>  [...]
>>  +
>>  +/*
>>  + * We have seen MMC DMA transfers read corrupted data from SDRAM 
>> when a burst
>>  + * interval ends at physical address 0x10000000. To avoid this 
>> problem, we
>>  + * remove the final page of low memory from the memory map.
>>  + */
>>  +void __init jz4770_reserve_unsafe_for_dma(void)
>>  +{
>>  +	int i;
>>  +
>>  +	for (i = 0; i < boot_mem_map.nr_map; i++) {
>>  +		struct boot_mem_map_entry *entry = boot_mem_map.map + i;
>>  +
>>  +		if (entry->type != BOOT_MEM_RAM)
>>  +			continue;
>>  +
>>  +		if (entry->addr + entry->size != 0x10000000)
>>  +			continue;
>>  +
>>  +		entry->size -= PAGE_SIZE;
>>  +		break;
>>  +	}
>>  +}
>>  diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
>>  index 85bc601e9a0d..5a2c20145aee 100644
>>  --- a/arch/mips/kernel/setup.c
>>  +++ b/arch/mips/kernel/setup.c
>>  @@ -879,6 +879,14 @@ static void __init arch_mem_init(char 
>> **cmdline_p)
>> 
>>   	parse_early_param();
>> 
>>  +#ifdef CONFIG_MACH_JZ4770
>>  +	if (current_cpu_type() == CPU_JZRISC &&
>>  +				mips_machtype == MACH_INGENIC_JZ4770) {
>>  +		extern void __init jz4770_reserve_unsafe_for_dma(void);
>>  +		jz4770_reserve_unsafe_for_dma();
>>  +	}
>>  +#endif
> 
> Hmm, a little bit ugly. I'm guessing the plat_mem_setup() callback is
> too early since mem= parameters won't have been taken into account yet
> from parse_early_param().
> 
> Is /memreserve/ in FDT of any value here or is it all too late due to
> old DTs?
> 
> Cheers
> James

When trying to test whether or not /memreserve/ fixes the corruption 
bug we were
having, we ran into the problem that we can't reproduce it anymore. 
Sigh.

So I'll skip this patch in the next patchset version, and handle this 
later if
it reappears.

-Paul

[PATCH v7 00/14] JZ4770 and GCW0 patchset

[Paul Cercueil]

Hi Ralf,

Here is the V7 of my JZ4770 and GCW0 patch series.

What changed from V6:
- In patch 10/14 I reverted a change that prevented the system
  name/model from being correctly initialized
- The patch dealing with the MMC DMA hardware issue has been dropped,
  since we couldn't reproduce the corruption issue. I can always send a
  separate patch if we find a way to reliably trigger the bug.
- All the rest is untouched.

Greetings,
-Paul

[PATCH v7 01/14] clk: ingenic: Use const pointer to clk_ops in struct

[Paul Cercueil]

The CGU common code does not modify the pointed clk_ops structure, so it
should be marked as const.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.h        | 2 +-
 drivers/clk/ingenic/jz4780-cgu.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

 v2: New patch in this series
 v3: No change
 v4: No change
 v5: No change
 v6: No change
 v7: No change

diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index e78b586536ea..f1527cf75b3f 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -120,7 +120,7 @@ struct ingenic_cgu_gate_info {
  * @clk_ops: custom clock operation callbacks
  */
 struct ingenic_cgu_custom_info {
-	struct clk_ops *clk_ops;
+	const struct clk_ops *clk_ops;
 };
 
 /**
diff --git a/drivers/clk/ingenic/jz4780-cgu.c b/drivers/clk/ingenic/jz4780-cgu.c
index ac3585ed8228..6427be117ff1 100644
--- a/drivers/clk/ingenic/jz4780-cgu.c
+++ b/drivers/clk/ingenic/jz4780-cgu.c
@@ -203,7 +203,7 @@ static int jz4780_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
-static struct clk_ops jz4780_otg_phy_ops = {
+static const struct clk_ops jz4780_otg_phy_ops = {
 	.get_parent = jz4780_otg_phy_get_parent,
 	.set_parent = jz4780_otg_phy_set_parent,
 
-- 
2.11.0

[PATCH v7 02/14] clk: ingenic: Fix recalc_rate for clocks with fixed divider

[Paul Cercueil]

Previously, the clocks with a fixed divider would report their rate
as being the same as the one of their parent, independently of the
divider in use. This commit fixes this behaviour.

This went unnoticed as neither the jz4740 nor the jz4780 CGU code
have clocks with fixed dividers yet.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 2 ++
 1 file changed, 2 insertions(+)

 v2: No changes
 v3: No changes
 v4: No changes
 v5: No changes
 v6: No changes
 v7: No changes

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index ab393637f7b0..a2e73a6d60fd 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -328,6 +328,8 @@ ingenic_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 		div *= clk_info->div.div;
 
 		rate /= div;
+	} else if (clk_info->type & CGU_CLK_FIXDIV) {
+		rate /= clk_info->fixdiv.div;
 	}
 
 	return rate;
-- 
2.11.0

[PATCH v7 03/14] clk: ingenic: support PLLs with no bypass bit

[Paul Cercueil]

The second PLL of the JZ4770 does not have a bypass bit.
This commit makes it possible to support it with the current common CGU
code.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 3 ++-
 drivers/clk/ingenic/cgu.h | 2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change
 v7: No change

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index a2e73a6d60fd..381c4a17a1fc 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -100,7 +100,8 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	n += pll_info->n_offset;
 	od_enc = ctl >> pll_info->od_shift;
 	od_enc &= GENMASK(pll_info->od_bits - 1, 0);
-	bypass = !!(ctl & BIT(pll_info->bypass_bit));
+	bypass = !pll_info->no_bypass_bit &&
+		 !!(ctl & BIT(pll_info->bypass_bit));
 	enable = !!(ctl & BIT(pll_info->enable_bit));
 
 	if (bypass)
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index f1527cf75b3f..9da34910bd80 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -48,6 +48,7 @@
  * @bypass_bit: the index of the bypass bit in the PLL control register
  * @enable_bit: the index of the enable bit in the PLL control register
  * @stable_bit: the index of the stable bit in the PLL control register
+ * @no_bypass_bit: if set, the PLL has no bypass functionality
  */
 struct ingenic_cgu_pll_info {
 	unsigned reg;
@@ -58,6 +59,7 @@ struct ingenic_cgu_pll_info {
 	u8 bypass_bit;
 	u8 enable_bit;
 	u8 stable_bit;
+	bool no_bypass_bit;
 };
 
 /**
-- 
2.11.0

[PATCH v7 04/14] clk: ingenic: Add code to enable/disable PLLs

[Paul Cercueil]

This commit permits the PLLs to be dynamically enabled and disabled when
their children clocks are enabled and disabled.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/cgu.c | 89 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 74 insertions(+), 15 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change
 v7: No change

diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 381c4a17a1fc..56a712c9075f 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -107,9 +107,6 @@ ingenic_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
 	if (bypass)
 		return parent_rate;
 
-	if (!enable)
-		return 0;
-
 	for (od = 0; od < pll_info->od_max; od++) {
 		if (pll_info->od_encoding[od] == od_enc)
 			break;
@@ -153,17 +150,25 @@ ingenic_pll_calc(const struct ingenic_cgu_clk_info *clk_info,
 	return div_u64((u64)parent_rate * m, n * od);
 }
 
-static long
-ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
-		       unsigned long *prate)
+static inline const struct ingenic_cgu_clk_info *to_clk_info(
+		struct ingenic_clk *ingenic_clk)
 {
-	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
 	const struct ingenic_cgu_clk_info *clk_info;
 
 	clk_info = &cgu->clock_info[ingenic_clk->idx];
 	BUG_ON(clk_info->type != CGU_CLK_PLL);
 
+	return clk_info;
+}
+
+static long
+ingenic_pll_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		       unsigned long *prate)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+
 	return ingenic_pll_calc(clk_info, req_rate, *prate, NULL, NULL, NULL);
 }
 
@@ -171,19 +176,14 @@ static int
 ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 		     unsigned long parent_rate)
 {
-	const unsigned timeout = 100;
 	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
 	struct ingenic_cgu *cgu = ingenic_clk->cgu;
-	const struct ingenic_cgu_clk_info *clk_info;
-	const struct ingenic_cgu_pll_info *pll_info;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
 	unsigned long rate, flags;
-	unsigned m, n, od, i;
+	unsigned int m, n, od;
 	u32 ctl;
 
-	clk_info = &cgu->clock_info[ingenic_clk->idx];
-	BUG_ON(clk_info->type != CGU_CLK_PLL);
-	pll_info = &clk_info->pll;
-
 	rate = ingenic_pll_calc(clk_info, req_rate, parent_rate,
 			       &m, &n, &od);
 	if (rate != req_rate)
@@ -202,6 +202,26 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	ctl &= ~(GENMASK(pll_info->od_bits - 1, 0) << pll_info->od_shift);
 	ctl |= pll_info->od_encoding[od - 1] << pll_info->od_shift;
 
+	writel(ctl, cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	return 0;
+}
+
+static int ingenic_pll_enable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	const unsigned int timeout = 100;
+	unsigned long flags;
+	unsigned int i;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+
 	ctl &= ~BIT(pll_info->bypass_bit);
 	ctl |= BIT(pll_info->enable_bit);
 
@@ -223,10 +243,48 @@ ingenic_pll_set_rate(struct clk_hw *hw, unsigned long req_rate,
 	return 0;
 }
 
+static void ingenic_pll_disable(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	unsigned long flags;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+
+	ctl &= ~BIT(pll_info->enable_bit);
+
+	writel(ctl, cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+}
+
+static int ingenic_pll_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_clk *ingenic_clk = to_ingenic_clk(hw);
+	struct ingenic_cgu *cgu = ingenic_clk->cgu;
+	const struct ingenic_cgu_clk_info *clk_info = to_clk_info(ingenic_clk);
+	const struct ingenic_cgu_pll_info *pll_info = &clk_info->pll;
+	unsigned long flags;
+	u32 ctl;
+
+	spin_lock_irqsave(&cgu->lock, flags);
+	ctl = readl(cgu->base + pll_info->reg);
+	spin_unlock_irqrestore(&cgu->lock, flags);
+
+	return !!(ctl & BIT(pll_info->enable_bit));
+}
+
 static const struct clk_ops ingenic_pll_ops = {
 	.recalc_rate = ingenic_pll_recalc_rate,
 	.round_rate = ingenic_pll_round_rate,
 	.set_rate = ingenic_pll_set_rate,
+
+	.enable = ingenic_pll_enable,
+	.disable = ingenic_pll_disable,
+	.is_enabled = ingenic_pll_is_enabled,
 };
 
 /*
@@ -601,6 +659,7 @@ static int ingenic_register_clock(struct ingenic_cgu *cgu, unsigned idx)
 		}
 	} else if (caps & CGU_CLK_PLL) {
 		clk_init.ops = &ingenic_pll_ops;
+		clk_init.flags |= CLK_SET_RATE_GATE;
 
 		caps &= ~CGU_CLK_PLL;
 
-- 
2.11.0

[PATCH v7 05/14] dt-bindings: clock: Add jz4770-cgu.h header

[Paul Cercueil]

This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4770-cgu driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 include/dt-bindings/clock/jz4770-cgu.h | 58 ++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 include/dt-bindings/clock/jz4770-cgu.h

 v3: New patch in this series
 v4: No change
 v5: Use SPDX license identifier
 v6: No change
 v7: No change

diff --git a/include/dt-bindings/clock/jz4770-cgu.h b/include/dt-bindings/clock/jz4770-cgu.h
new file mode 100644
index 000000000000..d68a7695a1f8
--- /dev/null
+++ b/include/dt-bindings/clock/jz4770-cgu.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,jz4770-cgu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_JZ4770_CGU_H__
+#define __DT_BINDINGS_CLOCK_JZ4770_CGU_H__
+
+#define JZ4770_CLK_EXT		0
+#define JZ4770_CLK_OSC32K	1
+#define JZ4770_CLK_PLL0		2
+#define JZ4770_CLK_PLL1		3
+#define JZ4770_CLK_CCLK		4
+#define JZ4770_CLK_H0CLK	5
+#define JZ4770_CLK_H1CLK	6
+#define JZ4770_CLK_H2CLK	7
+#define JZ4770_CLK_C1CLK	8
+#define JZ4770_CLK_PCLK		9
+#define JZ4770_CLK_MMC0_MUX	10
+#define JZ4770_CLK_MMC0		11
+#define JZ4770_CLK_MMC1_MUX	12
+#define JZ4770_CLK_MMC1		13
+#define JZ4770_CLK_MMC2_MUX	14
+#define JZ4770_CLK_MMC2		15
+#define JZ4770_CLK_CIM		16
+#define JZ4770_CLK_UHC		17
+#define JZ4770_CLK_GPU		18
+#define JZ4770_CLK_BCH		19
+#define JZ4770_CLK_LPCLK_MUX	20
+#define JZ4770_CLK_GPS		21
+#define JZ4770_CLK_SSI_MUX	22
+#define JZ4770_CLK_PCM_MUX	23
+#define JZ4770_CLK_I2S		24
+#define JZ4770_CLK_OTG		25
+#define JZ4770_CLK_SSI0		26
+#define JZ4770_CLK_SSI1		27
+#define JZ4770_CLK_SSI2		28
+#define JZ4770_CLK_PCM0		29
+#define JZ4770_CLK_PCM1		30
+#define JZ4770_CLK_DMA		31
+#define JZ4770_CLK_I2C0		32
+#define JZ4770_CLK_I2C1		33
+#define JZ4770_CLK_I2C2		34
+#define JZ4770_CLK_UART0	35
+#define JZ4770_CLK_UART1	36
+#define JZ4770_CLK_UART2	37
+#define JZ4770_CLK_UART3	38
+#define JZ4770_CLK_IPU		39
+#define JZ4770_CLK_ADC		40
+#define JZ4770_CLK_AIC		41
+#define JZ4770_CLK_AUX		42
+#define JZ4770_CLK_VPU		43
+#define JZ4770_CLK_UHC_PHY	44
+#define JZ4770_CLK_OTG_PHY	45
+#define JZ4770_CLK_EXT512	46
+#define JZ4770_CLK_RTC		47
+
+#endif /* __DT_BINDINGS_CLOCK_JZ4770_CGU_H__ */
-- 
2.11.0

[PATCH v7 06/14] clk: Add Ingenic jz4770 CGU driver

[Paul Cercueil]

Add support for the clocks provided by the CGU in the Ingenic JZ4770
SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 drivers/clk/ingenic/Makefile     |   1 +
 drivers/clk/ingenic/jz4770-cgu.c | 483 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 484 insertions(+)
 create mode 100644 drivers/clk/ingenic/jz4770-cgu.c

 v2: Make structures static const
 v3: <dt-bindings/clock/jz4770-cgu.h> is now added in a separate patch
 v4: No change
 v5: Use SPDX license identifier
 v6: No change
 v7: No change

diff --git a/drivers/clk/ingenic/Makefile b/drivers/clk/ingenic/Makefile
index cd47b0664c2b..1456e4cdb562 100644
--- a/drivers/clk/ingenic/Makefile
+++ b/drivers/clk/ingenic/Makefile
@@ -1,3 +1,4 @@
 obj-y				+= cgu.o
 obj-$(CONFIG_MACH_JZ4740)	+= jz4740-cgu.o
+obj-$(CONFIG_MACH_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_MACH_JZ4780)	+= jz4780-cgu.o
diff --git a/drivers/clk/ingenic/jz4770-cgu.c b/drivers/clk/ingenic/jz4770-cgu.c
new file mode 100644
index 000000000000..c78d369b9403
--- /dev/null
+++ b/drivers/clk/ingenic/jz4770-cgu.c
@@ -0,0 +1,483 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ4770 SoC CGU driver
+ * Copyright 2018, Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include "cgu.h"
+
+/*
+ * CPM registers offset address definition
+ */
+#define CGU_REG_CPCCR		0x00
+#define CGU_REG_LCR		0x04
+#define CGU_REG_CPPCR0		0x10
+#define CGU_REG_CLKGR0		0x20
+#define CGU_REG_OPCR		0x24
+#define CGU_REG_CLKGR1		0x28
+#define CGU_REG_CPPCR1		0x30
+#define CGU_REG_USBPCR1		0x48
+#define CGU_REG_USBCDR		0x50
+#define CGU_REG_I2SCDR		0x60
+#define CGU_REG_LPCDR		0x64
+#define CGU_REG_MSC0CDR		0x68
+#define CGU_REG_UHCCDR		0x6c
+#define CGU_REG_SSICDR		0x74
+#define CGU_REG_CIMCDR		0x7c
+#define CGU_REG_GPSCDR		0x80
+#define CGU_REG_PCMCDR		0x84
+#define CGU_REG_GPUCDR		0x88
+#define CGU_REG_MSC1CDR		0xA4
+#define CGU_REG_MSC2CDR		0xA8
+#define CGU_REG_BCHCDR		0xAC
+
+/* bits within the LCR register */
+#define LCR_LPM			BIT(0)		/* Low Power Mode */
+
+/* bits within the OPCR register */
+#define OPCR_SPENDH		BIT(5)		/* UHC PHY suspend */
+#define OPCR_SPENDN		BIT(7)		/* OTG PHY suspend */
+
+/* bits within the USBPCR1 register */
+#define USBPCR1_UHC_POWER	BIT(5)		/* UHC PHY power down */
+
+static struct ingenic_cgu *cgu;
+
+static int jz4770_uhc_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDH, reg_opcr);
+	writel(readl(reg_usbpcr1) | USBPCR1_UHC_POWER, reg_usbpcr1);
+	return 0;
+}
+
+static void jz4770_uhc_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	writel(readl(reg_usbpcr1) & ~USBPCR1_UHC_POWER, reg_usbpcr1);
+	writel(readl(reg_opcr) | OPCR_SPENDH, reg_opcr);
+}
+
+static int jz4770_uhc_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+	void __iomem *reg_usbpcr1	= cgu->base + CGU_REG_USBPCR1;
+
+	return !(readl(reg_opcr) & OPCR_SPENDH) &&
+		(readl(reg_usbpcr1) & USBPCR1_UHC_POWER);
+}
+
+static const struct clk_ops jz4770_uhc_phy_ops = {
+	.enable = jz4770_uhc_phy_enable,
+	.disable = jz4770_uhc_phy_disable,
+	.is_enabled = jz4770_uhc_phy_is_enabled,
+};
+
+static int jz4770_otg_phy_enable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	writel(readl(reg_opcr) | OPCR_SPENDN, reg_opcr);
+
+	/* Wait for the clock to be stable */
+	udelay(50);
+	return 0;
+}
+
+static void jz4770_otg_phy_disable(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	writel(readl(reg_opcr) & ~OPCR_SPENDN, reg_opcr);
+}
+
+static int jz4770_otg_phy_is_enabled(struct clk_hw *hw)
+{
+	void __iomem *reg_opcr		= cgu->base + CGU_REG_OPCR;
+
+	return !!(readl(reg_opcr) & OPCR_SPENDN);
+}
+
+static const struct clk_ops jz4770_otg_phy_ops = {
+	.enable = jz4770_otg_phy_enable,
+	.disable = jz4770_otg_phy_disable,
+	.is_enabled = jz4770_otg_phy_is_enabled,
+};
+
+static const s8 pll_od_encoding[8] = {
+	0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
+};
+
+static const struct ingenic_cgu_clk_info jz4770_cgu_clocks[] = {
+
+	/* External clocks */
+
+	[JZ4770_CLK_EXT] = { "ext", CGU_CLK_EXT },
+	[JZ4770_CLK_OSC32K] = { "osc32k", CGU_CLK_EXT },
+
+	/* PLLs */
+
+	[JZ4770_CLK_PLL0] = {
+		"pll0", CGU_CLK_PLL,
+		.parents = { JZ4770_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR0,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.bypass_bit = 9,
+			.enable_bit = 8,
+			.stable_bit = 10,
+		},
+	},
+
+	[JZ4770_CLK_PLL1] = {
+		/* TODO: PLL1 can depend on PLL0 */
+		"pll1", CGU_CLK_PLL,
+		.parents = { JZ4770_CLK_EXT },
+		.pll = {
+			.reg = CGU_REG_CPPCR1,
+			.m_shift = 24,
+			.m_bits = 7,
+			.m_offset = 1,
+			.n_shift = 18,
+			.n_bits = 5,
+			.n_offset = 1,
+			.od_shift = 16,
+			.od_bits = 2,
+			.od_max = 8,
+			.od_encoding = pll_od_encoding,
+			.enable_bit = 7,
+			.stable_bit = 6,
+			.no_bypass_bit = true,
+		},
+	},
+
+	/* Main clocks */
+
+	[JZ4770_CLK_CCLK] = {
+		"cclk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_H0CLK] = {
+		"h0clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_H1CLK] = {
+		"h1clk", CGU_CLK_DIV | CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 24, 1, 4, 22, -1, -1 },
+		.gate = { CGU_REG_LCR, 30 },
+	},
+	[JZ4770_CLK_H2CLK] = {
+		"h2clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 16, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_C1CLK] = {
+		"c1clk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1 },
+	},
+	[JZ4770_CLK_PCLK] = {
+		"pclk", CGU_CLK_DIV,
+		.parents = { JZ4770_CLK_PLL0, },
+		.div = { CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1 },
+	},
+
+	/* Those divided clocks can connect to PLL0 or PLL1 */
+
+	[JZ4770_CLK_MMC0_MUX] = {
+		"mmc0_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC0CDR, 30, 1 },
+		.div = { CGU_REG_MSC0CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC0CDR, 31 },
+	},
+	[JZ4770_CLK_MMC1_MUX] = {
+		"mmc1_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC1CDR, 30, 1 },
+		.div = { CGU_REG_MSC1CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC1CDR, 31 },
+	},
+	[JZ4770_CLK_MMC2_MUX] = {
+		"mmc2_mux", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_MSC2CDR, 30, 1 },
+		.div = { CGU_REG_MSC2CDR, 0, 1, 7, -1, -1, 31 },
+		.gate = { CGU_REG_MSC2CDR, 31 },
+	},
+	[JZ4770_CLK_CIM] = {
+		"cim", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_CIMCDR, 31, 1 },
+		.div = { CGU_REG_CIMCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 26 },
+	},
+	[JZ4770_CLK_UHC] = {
+		"uhc", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_UHCCDR, 29, 1 },
+		.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 24 },
+	},
+	[JZ4770_CLK_GPU] = {
+		"gpu", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, -1 },
+		.mux = { CGU_REG_GPUCDR, 31, 1 },
+		.div = { CGU_REG_GPUCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 9 },
+	},
+	[JZ4770_CLK_BCH] = {
+		"bch", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_BCHCDR, 31, 1 },
+		.div = { CGU_REG_BCHCDR, 0, 1, 3, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 1 },
+	},
+	[JZ4770_CLK_LPCLK_MUX] = {
+		"lpclk", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_LPCDR, 29, 1 },
+		.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 28 },
+	},
+	[JZ4770_CLK_GPS] = {
+		"gps", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_PLL0, JZ4770_CLK_PLL1, },
+		.mux = { CGU_REG_GPSCDR, 31, 1 },
+		.div = { CGU_REG_GPSCDR, 0, 1, 4, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 22 },
+	},
+
+	/* Those divided clocks can connect to EXT, PLL0 or PLL1 */
+
+	[JZ4770_CLK_SSI_MUX] = {
+		"ssi_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_SSICDR, 30, 2 },
+		.div = { CGU_REG_SSICDR, 0, 1, 6, -1, -1, -1 },
+	},
+	[JZ4770_CLK_PCM_MUX] = {
+		"pcm_mux", CGU_CLK_DIV | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_PCMCDR, 30, 2 },
+		.div = { CGU_REG_PCMCDR, 0, 1, 9, -1, -1, -1 },
+	},
+	[JZ4770_CLK_I2S] = {
+		"i2s", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_I2SCDR, 30, 2 },
+		.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR1, 13 },
+	},
+	[JZ4770_CLK_OTG] = {
+		"usb", CGU_CLK_DIV | CGU_CLK_GATE | CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT, -1,
+			JZ4770_CLK_PLL0, JZ4770_CLK_PLL1 },
+		.mux = { CGU_REG_USBCDR, 30, 2 },
+		.div = { CGU_REG_USBCDR, 0, 1, 8, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR0, 2 },
+	},
+
+	/* Gate-only clocks */
+
+	[JZ4770_CLK_SSI0] = {
+		"ssi0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 4 },
+	},
+	[JZ4770_CLK_SSI1] = {
+		"ssi1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 19 },
+	},
+	[JZ4770_CLK_SSI2] = {
+		"ssi2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_SSI_MUX, },
+		.gate = { CGU_REG_CLKGR0, 20 },
+	},
+	[JZ4770_CLK_PCM0] = {
+		"pcm0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PCM_MUX, },
+		.gate = { CGU_REG_CLKGR1, 8 },
+	},
+	[JZ4770_CLK_PCM1] = {
+		"pcm1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_PCM_MUX, },
+		.gate = { CGU_REG_CLKGR1, 10 },
+	},
+	[JZ4770_CLK_DMA] = {
+		"dma", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H2CLK, },
+		.gate = { CGU_REG_CLKGR0, 21 },
+	},
+	[JZ4770_CLK_I2C0] = {
+		"i2c0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 5 },
+	},
+	[JZ4770_CLK_I2C1] = {
+		"i2c1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 6 },
+	},
+	[JZ4770_CLK_I2C2] = {
+		"i2c2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR1, 15 },
+	},
+	[JZ4770_CLK_UART0] = {
+		"uart0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 15 },
+	},
+	[JZ4770_CLK_UART1] = {
+		"uart1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 16 },
+	},
+	[JZ4770_CLK_UART2] = {
+		"uart2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 17 },
+	},
+	[JZ4770_CLK_UART3] = {
+		"uart3", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 18 },
+	},
+	[JZ4770_CLK_IPU] = {
+		"ipu", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H0CLK, },
+		.gate = { CGU_REG_CLKGR0, 29 },
+	},
+	[JZ4770_CLK_ADC] = {
+		"adc", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 14 },
+	},
+	[JZ4770_CLK_AIC] = {
+		"aic", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_EXT, },
+		.gate = { CGU_REG_CLKGR0, 8 },
+	},
+	[JZ4770_CLK_AUX] = {
+		"aux", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_C1CLK, },
+		.gate = { CGU_REG_CLKGR1, 14 },
+	},
+	[JZ4770_CLK_VPU] = {
+		"vpu", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_H1CLK, },
+		.gate = { CGU_REG_CLKGR1, 7 },
+	},
+	[JZ4770_CLK_MMC0] = {
+		"mmc0", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC0_MUX, },
+		.gate = { CGU_REG_CLKGR0, 3 },
+	},
+	[JZ4770_CLK_MMC1] = {
+		"mmc1", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC1_MUX, },
+		.gate = { CGU_REG_CLKGR0, 11 },
+	},
+	[JZ4770_CLK_MMC2] = {
+		"mmc2", CGU_CLK_GATE,
+		.parents = { JZ4770_CLK_MMC2_MUX, },
+		.gate = { CGU_REG_CLKGR0, 12 },
+	},
+
+	/* Custom clocks */
+
+	[JZ4770_CLK_UHC_PHY] = {
+		"uhc_phy", CGU_CLK_CUSTOM,
+		.parents = { JZ4770_CLK_UHC, -1, -1, -1 },
+		.custom = { &jz4770_uhc_phy_ops },
+	},
+	[JZ4770_CLK_OTG_PHY] = {
+		"usb_phy", CGU_CLK_CUSTOM,
+		.parents = { JZ4770_CLK_OTG, -1, -1, -1 },
+		.custom = { &jz4770_otg_phy_ops },
+	},
+
+	[JZ4770_CLK_EXT512] = {
+		"ext/512", CGU_CLK_FIXDIV,
+		.parents = { JZ4770_CLK_EXT },
+		.fixdiv = { 512 },
+	},
+
+	[JZ4770_CLK_RTC] = {
+		"rtc", CGU_CLK_MUX,
+		.parents = { JZ4770_CLK_EXT512, JZ4770_CLK_OSC32K, },
+		.mux = { CGU_REG_OPCR, 2, 1},
+	},
+};
+
+#if IS_ENABLED(CONFIG_PM_SLEEP)
+static int jz4770_cgu_pm_suspend(void)
+{
+	u32 val;
+
+	val = readl(cgu->base + CGU_REG_LCR);
+	writel(val | LCR_LPM, cgu->base + CGU_REG_LCR);
+	return 0;
+}
+
+static void jz4770_cgu_pm_resume(void)
+{
+	u32 val;
+
+	val = readl(cgu->base + CGU_REG_LCR);
+	writel(val & ~LCR_LPM, cgu->base + CGU_REG_LCR);
+}
+
+static struct syscore_ops jz4770_cgu_pm_ops = {
+	.suspend = jz4770_cgu_pm_suspend,
+	.resume = jz4770_cgu_pm_resume,
+};
+#endif /* CONFIG_PM_SLEEP */
+
+static void __init jz4770_cgu_init(struct device_node *np)
+{
+	int retval;
+
+	cgu = ingenic_cgu_new(jz4770_cgu_clocks,
+			      ARRAY_SIZE(jz4770_cgu_clocks), np);
+	if (!cgu)
+		pr_err("%s: failed to initialise CGU\n", __func__);
+
+	retval = ingenic_cgu_register_clocks(cgu);
+	if (retval)
+		pr_err("%s: failed to register CGU Clocks\n", __func__);
+
+#if IS_ENABLED(CONFIG_PM_SLEEP)
+	register_syscore_ops(&jz4770_cgu_pm_ops);
+#endif
+}
+
+/* We only probe via devicetree, no need for a platform driver */
+CLK_OF_DECLARE(jz4770_cgu, "ingenic,jz4770-cgu", jz4770_cgu_init);
-- 
2.11.0

[PATCH v7 07/14] MIPS: Setup boot_command_line before plat_mem_setup

[Paul Cercueil]

From: Paul Burton <paul.burton@mips.com>

Platforms using DT will typically call __dt_setup_arch from
plat_mem_setup. This in turn calls early_init_dt_scan. When
CONFIG_CMDLINE is set, this leads to its value being copied into
boot_command_line by early_init_dt_scan_chosen. If this happens before
the code setting up boot_command_line in arch_mem_init runs, that code
will go on to append CONFIG_CMDLINE (via builtin_cmdline) to
boot_command_line again, duplicating it. For some command line
parameters (eg. earlycon) this can be a problem. Set up
boot_command_line before early_init_dt_scan_chosen gets called such that
it will not write CONFIG_CMDLINE in this scenario & the arguments aren't
duplicated.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mathieu Malaterre <malat@debian.org>
---
 arch/mips/kernel/setup.c | 39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

 v2: New patch in this series
 v3: No change
 v4: No change
 v5: No change
 v6: Update Paul Burton's email address
 v7: No change

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 702c678de116..85bc601e9a0d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -826,25 +826,6 @@ static void __init arch_mem_init(char **cmdline_p)
 	struct memblock_region *reg;
 	extern void plat_mem_setup(void);
 
-	/* call board setup routine */
-	plat_mem_setup();
-
-	/*
-	 * Make sure all kernel memory is in the maps.  The "UP" and
-	 * "DOWN" are opposite for initdata since if it crosses over
-	 * into another memory section you don't want that to be
-	 * freed when the initdata is freed.
-	 */
-	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
-			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
-			 BOOT_MEM_RAM);
-	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
-			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
-			 BOOT_MEM_INIT_RAM);
-
-	pr_info("Determined physical RAM map:\n");
-	print_memory_map();
-
 #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
 	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
 #else
@@ -872,6 +853,26 @@ static void __init arch_mem_init(char **cmdline_p)
 	}
 #endif
 #endif
+
+	/* call board setup routine */
+	plat_mem_setup();
+
+	/*
+	 * Make sure all kernel memory is in the maps.  The "UP" and
+	 * "DOWN" are opposite for initdata since if it crosses over
+	 * into another memory section you don't want that to be
+	 * freed when the initdata is freed.
+	 */
+	arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT,
+			 PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT,
+			 BOOT_MEM_RAM);
+	arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT,
+			 PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT,
+			 BOOT_MEM_INIT_RAM);
+
+	pr_info("Determined physical RAM map:\n");
+	print_memory_map();
+
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 
 	*cmdline_p = command_line;
-- 
2.11.0

[PATCH v7 08/14] MIPS: ingenic: Use common cmdline handling code

[Paul Cercueil]

From: Paul Burton <paul.burton@mips.com>

jz4740_init_cmdline appends all arguments from argv (in fw_arg1) to
arcs_cmdline, up to argc (in fw_arg0). The common code in
fw_init_cmdline will do the exact same thing when run on a system where
fw_arg0 isn't a pointer to kseg0 (it'll also set _fw_envp but we don't
use it). Remove the custom implementation & use the generic code.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
---
 arch/mips/jz4740/prom.c | 24 ++----------------------
 1 file changed, 2 insertions(+), 22 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: Update Paul Burton's email address
 v7: No change

diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 47e857194ce6..a62dd8e6ecf9 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -20,33 +20,13 @@
 #include <linux/serial_reg.h>
 
 #include <asm/bootinfo.h>
+#include <asm/fw/fw.h>
 #include <asm/mach-jz4740/base.h>
 
-static __init void jz4740_init_cmdline(int argc, char *argv[])
-{
-	unsigned int count = COMMAND_LINE_SIZE - 1;
-	int i;
-	char *dst = &(arcs_cmdline[0]);
-	char *src;
-
-	for (i = 1; i < argc && count; ++i) {
-		src = argv[i];
-		while (*src && count) {
-			*dst++ = *src++;
-			--count;
-		}
-		*dst++ = ' ';
-	}
-	if (i > 1)
-		--dst;
-
-	*dst = 0;
-}
-
 void __init prom_init(void)
 {
-	jz4740_init_cmdline((int)fw_arg0, (char **)fw_arg1);
 	mips_machtype = MACH_INGENIC_JZ4740;
+	fw_init_cmdline();
 }
 
 void __init prom_free_prom_memory(void)
-- 
2.11.0

[PATCH v7 09/14] MIPS: platform: add machtype IDs for more Ingenic SoCs

[Paul Cercueil]

Add a machtype ID for the JZ4780 SoC, which was missing, and one for the
newly supported JZ4770 SoC.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: James Hogan <jhogan@kernel.org>
---
 arch/mips/include/asm/bootinfo.h | 2 ++
 1 file changed, 2 insertions(+)

 v2: No change
 v3: No change
 v4: No change
 v5: No change
 v6: No change
 v7: No change

diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h
index e26a093bb17a..a301a8f4bc66 100644
--- a/arch/mips/include/asm/bootinfo.h
+++ b/arch/mips/include/asm/bootinfo.h
@@ -79,6 +79,8 @@ enum loongson_machine_type {
  */
 #define  MACH_INGENIC_JZ4730	0	/* JZ4730 SOC		*/
 #define  MACH_INGENIC_JZ4740	1	/* JZ4740 SOC		*/
+#define  MACH_INGENIC_JZ4770	2	/* JZ4770 SOC		*/
+#define  MACH_INGENIC_JZ4780	3	/* JZ4780 SOC		*/
 
 extern char *system_type;
 const char *get_system_type(void);
-- 
2.11.0

[PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string

[Paul Cercueil]

Previously, the mips_machtype variable was always initialized
to MACH_INGENIC_JZ4740 even if running on different SoCs.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 arch/mips/jz4740/prom.c  |  1 -
 arch/mips/jz4740/setup.c | 22 +++++++++++++++++++---
 2 files changed, 19 insertions(+), 4 deletions(-)

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
 v6: Init mips_machtype from DT compatible string instead of using
     MIPS_MACHINE
 v7: Fix system name not initialized

diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index a62dd8e6ecf9..eb9f2f97bedb 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -25,7 +25,6 @@
 
 void __init prom_init(void)
 {
-	mips_machtype = MACH_INGENIC_JZ4740;
 	fw_init_cmdline();
 }
 
diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
index 6d0152321819..afb40f8bce96 100644
--- a/arch/mips/jz4740/setup.c
+++ b/arch/mips/jz4740/setup.c
@@ -53,6 +53,16 @@ static void __init jz4740_detect_mem(void)
 	add_memory_region(0, size, BOOT_MEM_RAM);
 }
 
+static unsigned long __init get_board_mach_type(const void *fdt)
+{
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
+		return MACH_INGENIC_JZ4780;
+	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
+		return MACH_INGENIC_JZ4770;
+
+	return MACH_INGENIC_JZ4740;
+}
+
 void __init plat_mem_setup(void)
 {
 	int offset;
@@ -63,6 +73,8 @@ void __init plat_mem_setup(void)
 	offset = fdt_path_offset(__dtb_start, "/memory");
 	if (offset < 0)
 		jz4740_detect_mem();
+
+	mips_machtype = get_board_mach_type(__dtb_start);
 }
 
 void __init device_tree_init(void)
@@ -75,10 +87,14 @@ void __init device_tree_init(void)
 
 const char *get_system_type(void)
 {
-	if (IS_ENABLED(CONFIG_MACH_JZ4780))
+	switch (mips_machtype) {
+	case MACH_INGENIC_JZ4780:
 		return "JZ4780";
-
-	return "JZ4740";
+	case MACH_INGENIC_JZ4770:
+		return "JZ4770";
+	default:
+		return "JZ4740";
+	}
 }
 
 void __init arch_init_irq(void)
-- 
2.11.0

[PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support

[Paul Cercueil]

Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
---
 arch/mips/boot/dts/ingenic/jz4770.dtsi | 212 +++++++++++++++++++++++++++++++++
 arch/mips/jz4740/Kconfig               |   6 +
 arch/mips/jz4740/time.c                |   2 +-
 3 files changed, 219 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/boot/dts/ingenic/jz4770.dtsi

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
 v6: No change
 v7: No change

diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi b/arch/mips/boot/dts/ingenic/jz4770.dtsi
new file mode 100644
index 000000000000..7c2804f3f5f1
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ingenic,jz4770";
+
+	cpuintc: interrupt-controller {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	intc: interrupt-controller@10001000 {
+		compatible = "ingenic,jz4770-intc";
+		reg = <0x10001000 0x40>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <2>;
+	};
+
+	ext: ext {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	osc32k: osc32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	cgu: jz4770-cgu@10000000 {
+		compatible = "ingenic,jz4770-cgu";
+		reg = <0x10000000 0x100>;
+
+		clocks = <&ext>, <&osc32k>;
+		clock-names = "ext", "osc32k";
+
+		#clock-cells = <1>;
+	};
+
+	pinctrl: pin-controller@10010000 {
+		compatible = "ingenic,jz4770-pinctrl";
+		reg = <0x10010000 0x600>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpa: gpio@0 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <0>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <17>;
+		};
+
+		gpb: gpio@1 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <1>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <16>;
+		};
+
+		gpc: gpio@2 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <2>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+
+		gpd: gpio@3 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <3>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <14>;
+		};
+
+		gpe: gpio@4 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <4>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <13>;
+		};
+
+		gpf: gpio@5 {
+			compatible = "ingenic,jz4770-gpio";
+			reg = <5>;
+
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 160 32>;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <12>;
+		};
+	};
+
+	uart0: serial@10030000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10030000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <5>;
+
+		status = "disabled";
+	};
+
+	uart1: serial@10031000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10031000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <4>;
+
+		status = "disabled";
+	};
+
+	uart2: serial@10032000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10032000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <3>;
+
+		status = "disabled";
+	};
+
+	uart3: serial@10033000 {
+		compatible = "ingenic,jz4770-uart";
+		reg = <0x10033000 0x100>;
+
+		clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
+		clock-names = "baud", "module";
+
+		interrupt-parent = <&intc>;
+		interrupts = <2>;
+
+		status = "disabled";
+	};
+
+	uhc: uhc@13430000 {
+		compatible = "generic-ohci";
+		reg = <0x13430000 0x1000>;
+
+		clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
+		assigned-clocks = <&cgu JZ4770_CLK_UHC>;
+		assigned-clock-rates = <48000000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <20>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 643af2012e14..29a9361a2b77 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -18,6 +18,12 @@ config MACH_JZ4740
 	bool
 	select SYS_HAS_CPU_MIPS32_R1
 
+config MACH_JZ4770
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_HIGHMEM
+
 config MACH_JZ4780
 	bool
 	select MIPS_CPU_SCACHE
diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
index bb1ad5119da4..2ca9160f642a 100644
--- a/arch/mips/jz4740/time.c
+++ b/arch/mips/jz4740/time.c
@@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
 #ifdef CONFIG_MACH_JZ4740
 	.irq = JZ4740_IRQ_TCU0,
 #endif
-#ifdef CONFIG_MACH_JZ4780
+#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
 	.irq = JZ4780_IRQ_TCU2,
 #endif
 };
-- 
2.11.0

[PATCH v7 12/14] MIPS: JZ4770: Work around config2 misreporting associativity

[Paul Cercueil]

From: Maarten ter Huurne <maarten@treewalker.org>

According to config2, the associativity would be 5-ways, but the
documentation states 4-ways, which also matches the documented
L2 cache size of 256 kB.

Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Reviewed-by: James Hogan <jhogan@kernel.org>
---
 arch/mips/mm/sc-mips.c | 9 +++++++++
 1 file changed, 9 insertions(+)

 v2: No change
 v3: No change
 v4: Rebased on top of Linux 4.15-rc5
 v5: No change
 v6: No change
 v7: No change

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 548acb7f8557..394673991bab 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -16,6 +16,7 @@
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
 #include <asm/mips-cps.h>
+#include <asm/bootinfo.h>
 
 /*
  * MIPS32/MIPS64 L2 cache handling
@@ -220,6 +221,14 @@ static inline int __init mips_sc_probe(void)
 	else
 		return 0;
 
+	/*
+	 * According to config2 it would be 5-ways, but that is contradicted
+	 * by all documentation.
+	 */
+	if (current_cpu_type() == CPU_JZRISC &&
+				mips_machtype == MACH_INGENIC_JZ4770)
+		c->scache.ways = 4;
+
 	c->scache.waysize = c->scache.sets * c->scache.linesz;
 	c->scache.waybit = __ffs(c->scache.waysize);
 
-- 
2.11.0

[PATCH v7 13/14] devicetree/bindings: Add GCW vendor prefix

[Paul Cercueil]

Game Consoles Worldwide, mostly known under the acronym GCW, is the
creator of the GCW Zero open-source video game system.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

 v2: It's 'Game Consoles Worldwide', not 'Games Consoles Worldwide'
 v3: No change
 v4: No change
 v5: No change
 v6: No change
 v7: No change

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 0994bdd82cd3..f40f4da39937 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -123,6 +123,7 @@ focaltech	FocalTech Systems Co.,Ltd
 friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
 fsl	Freescale Semiconductor
 fujitsu	Fujitsu Ltd.
+gcw Game Consoles Worldwide
 ge	General Electric Company
 geekbuying	GeekBuying
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
-- 
2.11.0

[PATCH v7 14/14] MIPS: ingenic: Initial GCW Zero support

[Paul Cercueil]

The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
handheld game console, successfully kickstarted in ~2012, running Linux.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
---
 arch/mips/boot/dts/ingenic/Makefile |  1 +
 arch/mips/boot/dts/ingenic/gcw0.dts | 62 +++++++++++++++++++++++++++++++++++++
 arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
 arch/mips/jz4740/Kconfig            |  4 +++
 4 files changed, 94 insertions(+)
 create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
 create mode 100644 arch/mips/configs/gcw0_defconfig

 v2: No change
 v3: No change
 v4: No change
 v5: Use SPDX license identifier
     Drop custom CROSS_COMPILE from defconfig
 v6: Add "model" property in devicetree
 v7: No change

diff --git a/arch/mips/boot/dts/ingenic/Makefile b/arch/mips/boot/dts/ingenic/Makefile
index 6a31759839b4..5b1361a89e02 100644
--- a/arch/mips/boot/dts/ingenic/Makefile
+++ b/arch/mips/boot/dts/ingenic/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_JZ4740_QI_LB60)	+= qi_lb60.dtb
+dtb-$(CONFIG_JZ4770_GCW0)	+= gcw0.dtb
 dtb-$(CONFIG_JZ4780_CI20)	+= ci20.dtb
 
 obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
new file mode 100644
index 000000000000..35f0291e8d38
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4770.dtsi"
+
+/ {
+	compatible = "gcw,zero", "ingenic,jz4770";
+	model = "GCW Zero";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial2:57600n8";
+	};
+
+	board {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		otg_phy: otg-phy {
+			compatible = "usb-nop-xceiv";
+			clocks = <&cgu JZ4770_CLK_OTG_PHY>;
+			clock-names = "main_clk";
+		};
+	};
+};
+
+&ext {
+	clock-frequency = <12000000>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&cgu {
+	/* Put high-speed peripherals under PLL1, such that we can change the
+	 * PLL0 frequency on demand without having to suspend peripherals.
+	 * We use a rate of 432 MHz, which is the least common multiple of
+	 * 27 MHz (required by TV encoder) and 48 MHz (required by USB host).
+	 */
+	assigned-clocks =
+		<&cgu JZ4770_CLK_PLL1>,
+		<&cgu JZ4770_CLK_UHC>;
+	assigned-clock-parents =
+		<0>,
+		<&cgu JZ4770_CLK_PLL1>;
+	assigned-clock-rates =
+		<432000000>;
+};
+
+&uhc {
+	/* The WiFi module is connected to the UHC. */
+	status = "okay";
+};
diff --git a/arch/mips/configs/gcw0_defconfig b/arch/mips/configs/gcw0_defconfig
new file mode 100644
index 000000000000..99ac1fa3b35f
--- /dev/null
+++ b/arch/mips/configs/gcw0_defconfig
@@ -0,0 +1,27 @@
+CONFIG_MACH_INGENIC=y
+CONFIG_JZ4770_GCW0=y
+CONFIG_HIGHMEM=y
+# CONFIG_BOUNCE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_SECCOMP is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_EMBEDDED=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_INGENIC=y
+CONFIG_USB=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_TMPFS=y
diff --git a/arch/mips/jz4740/Kconfig b/arch/mips/jz4740/Kconfig
index 29a9361a2b77..4dd0c446ecec 100644
--- a/arch/mips/jz4740/Kconfig
+++ b/arch/mips/jz4740/Kconfig
@@ -8,6 +8,10 @@ config JZ4740_QI_LB60
 	bool "Qi Hardware Ben NanoNote"
 	select MACH_JZ4740
 
+config JZ4770_GCW0
+	bool "Game Consoles Worldwide GCW Zero"
+	select MACH_JZ4770
+
 config JZ4780_CI20
 	bool "MIPS Creator CI20"
 	select MACH_JZ4780
-- 
2.11.0

Re: [PATCH v7 10/14] MIPS: ingenic: Detect machtype from SoC compatible string

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 2514 bytes --]

On Tue, Jan 16, 2018 at 04:48:00PM +0100, Paul Cercueil wrote:
> Previously, the mips_machtype variable was always initialized
> to MACH_INGENIC_JZ4740 even if running on different SoCs.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  arch/mips/jz4740/prom.c  |  1 -
>  arch/mips/jz4740/setup.c | 22 +++++++++++++++++++---
>  2 files changed, 19 insertions(+), 4 deletions(-)
> 
>  v2: No change
>  v3: No change
>  v4: No change
>  v5: Use SPDX license identifier
>  v6: Init mips_machtype from DT compatible string instead of using
>      MIPS_MACHINE
>  v7: Fix system name not initialized
> 
> diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
> index a62dd8e6ecf9..eb9f2f97bedb 100644
> --- a/arch/mips/jz4740/prom.c
> +++ b/arch/mips/jz4740/prom.c
> @@ -25,7 +25,6 @@
>  
>  void __init prom_init(void)
>  {
> -	mips_machtype = MACH_INGENIC_JZ4740;
>  	fw_init_cmdline();
>  }
>  
> diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c
> index 6d0152321819..afb40f8bce96 100644
> --- a/arch/mips/jz4740/setup.c
> +++ b/arch/mips/jz4740/setup.c
> @@ -53,6 +53,16 @@ static void __init jz4740_detect_mem(void)
>  	add_memory_region(0, size, BOOT_MEM_RAM);
>  }
>  
> +static unsigned long __init get_board_mach_type(const void *fdt)
> +{
> +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4780"))
> +		return MACH_INGENIC_JZ4780;
> +	if (!fdt_node_check_compatible(fdt, 0, "ingenic,jz4770"))
> +		return MACH_INGENIC_JZ4770;

Based on the assumption that fdt will always be non-NULL since commit
ffb1843d059c ("MIPS: JZ4740: require & include DT"):

Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

> +
> +	return MACH_INGENIC_JZ4740;
> +}
> +
>  void __init plat_mem_setup(void)
>  {
>  	int offset;
> @@ -63,6 +73,8 @@ void __init plat_mem_setup(void)
>  	offset = fdt_path_offset(__dtb_start, "/memory");
>  	if (offset < 0)
>  		jz4740_detect_mem();
> +
> +	mips_machtype = get_board_mach_type(__dtb_start);
>  }
>  
>  void __init device_tree_init(void)
> @@ -75,10 +87,14 @@ void __init device_tree_init(void)
>  
>  const char *get_system_type(void)
>  {
> -	if (IS_ENABLED(CONFIG_MACH_JZ4780))
> +	switch (mips_machtype) {
> +	case MACH_INGENIC_JZ4780:
>  		return "JZ4780";
> -
> -	return "JZ4740";
> +	case MACH_INGENIC_JZ4770:
> +		return "JZ4770";
> +	default:
> +		return "JZ4740";
> +	}
>  }
>  
>  void __init arch_init_irq(void)
> -- 
> 2.11.0
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1207 bytes --]

On Tue, Jan 16, 2018 at 04:48:01PM +0100, Paul Cercueil wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>


> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
>  #ifdef CONFIG_MACH_JZ4740
>  	.irq = JZ4740_IRQ_TCU0,
>  #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>  	.irq = JZ4780_IRQ_TCU2,
>  #endif
>  };
> -- 
> 2.11.0
> 

MACH_INGENIC selects SYS_SUPPORTS_ZBOOT_UART16550, so I wonder whether
arch/mips/boot/compressed/uart-16550.c needs updating for JZ4770 like
commit ba9e72c2290f ("MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780")
does for JZ4780.

Otherwise the non-DT bits look reasonable (I've not really looked
properly at the DT):
Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1207 bytes --]

On Tue, Jan 16, 2018 at 04:48:01PM +0100, Paul Cercueil wrote:
> Provide just enough bits (clocks, clocksource, uart) to allow a kernel
> to boot on the JZ4770 SoC to a initramfs userspace.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>


> diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> index bb1ad5119da4..2ca9160f642a 100644
> --- a/arch/mips/jz4740/time.c
> +++ b/arch/mips/jz4740/time.c
> @@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
>  #ifdef CONFIG_MACH_JZ4740
>  	.irq = JZ4740_IRQ_TCU0,
>  #endif
> -#ifdef CONFIG_MACH_JZ4780
> +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>  	.irq = JZ4780_IRQ_TCU2,
>  #endif
>  };
> -- 
> 2.11.0
> 

MACH_INGENIC selects SYS_SUPPORTS_ZBOOT_UART16550, so I wonder whether
arch/mips/boot/compressed/uart-16550.c needs updating for JZ4770 like
commit ba9e72c2290f ("MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780")
does for JZ4780.

Otherwise the non-DT bits look reasonable (I've not really looked
properly at the DT):
Reviewed-by: James Hogan <jhogan@kernel.org>

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support

[Paul Cercueil]

Hi James,

Le mer. 17 janv. 2018 à 22:28, James Hogan <james.hogan@mips.com> a 
écrit :
> On Tue, Jan 16, 2018 at 04:48:01PM +0100, Paul Cercueil wrote:
>>  Provide just enough bits (clocks, clocksource, uart) to allow a 
>> kernel
>>  to boot on the JZ4770 SoC to a initramfs userspace.
>> 
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
> 
> 
>>  diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
>>  index bb1ad5119da4..2ca9160f642a 100644
>>  --- a/arch/mips/jz4740/time.c
>>  +++ b/arch/mips/jz4740/time.c
>>  @@ -113,7 +113,7 @@ static struct clock_event_device 
>> jz4740_clockevent = {
>>   #ifdef CONFIG_MACH_JZ4740
>>   	.irq = JZ4740_IRQ_TCU0,
>>   #endif
>>  -#ifdef CONFIG_MACH_JZ4780
>>  +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
>>   	.irq = JZ4780_IRQ_TCU2,
>>   #endif
>>   };
>>  --
>>  2.11.0
>> 
> 
> MACH_INGENIC selects SYS_SUPPORTS_ZBOOT_UART16550, so I wonder whether
> arch/mips/boot/compressed/uart-16550.c needs updating for JZ4770 like
> commit ba9e72c2290f ("MIPS: Fix build with DEBUG_ZBOOT and 
> MACH_JZ4780")
> does for JZ4780.
> 
> Otherwise the non-DT bits look reasonable (I've not really looked
> properly at the DT):
> Reviewed-by: James Hogan <jhogan@kernel.org>
> 
> Cheers
> James

I will fix it in a separate patch, if you don't mind.

-Paul

Re: [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1621 bytes --]

On Thu, Jan 18, 2018 at 06:14:30PM +0100, Paul Cercueil wrote:
> Hi James,
> 
> Le mer. 17 janv. 2018 à 22:28, James Hogan <james.hogan@mips.com> a 
> écrit :
> > On Tue, Jan 16, 2018 at 04:48:01PM +0100, Paul Cercueil wrote:
> >>  Provide just enough bits (clocks, clocksource, uart) to allow a 
> >> kernel
> >>  to boot on the JZ4770 SoC to a initramfs userspace.
> >> 
> >>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> >>  Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
> > 
> > 
> >>  diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> >>  index bb1ad5119da4..2ca9160f642a 100644
> >>  --- a/arch/mips/jz4740/time.c
> >>  +++ b/arch/mips/jz4740/time.c
> >>  @@ -113,7 +113,7 @@ static struct clock_event_device 
> >> jz4740_clockevent = {
> >>   #ifdef CONFIG_MACH_JZ4740
> >>   	.irq = JZ4740_IRQ_TCU0,
> >>   #endif
> >>  -#ifdef CONFIG_MACH_JZ4780
> >>  +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
> >>   	.irq = JZ4780_IRQ_TCU2,
> >>   #endif
> >>   };
> >>  --
> >>  2.11.0
> >> 
> > 
> > MACH_INGENIC selects SYS_SUPPORTS_ZBOOT_UART16550, so I wonder whether
> > arch/mips/boot/compressed/uart-16550.c needs updating for JZ4770 like
> > commit ba9e72c2290f ("MIPS: Fix build with DEBUG_ZBOOT and 
> > MACH_JZ4780")
> > does for JZ4780.
> > 
> > Otherwise the non-DT bits look reasonable (I've not really looked
> > properly at the DT):
> > Reviewed-by: James Hogan <jhogan@kernel.org>
> > 
> > Cheers
> > James
> 
> I will fix it in a separate patch, if you don't mind.

Sure,

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v7 11/14] MIPS: ingenic: Initial JZ4770 support

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 1621 bytes --]

On Thu, Jan 18, 2018 at 06:14:30PM +0100, Paul Cercueil wrote:
> Hi James,
> 
> Le mer. 17 janv. 2018 à 22:28, James Hogan <james.hogan@mips.com> a 
> écrit :
> > On Tue, Jan 16, 2018 at 04:48:01PM +0100, Paul Cercueil wrote:
> >>  Provide just enough bits (clocks, clocksource, uart) to allow a 
> >> kernel
> >>  to boot on the JZ4770 SoC to a initramfs userspace.
> >> 
> >>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> >>  Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
> > 
> > 
> >>  diff --git a/arch/mips/jz4740/time.c b/arch/mips/jz4740/time.c
> >>  index bb1ad5119da4..2ca9160f642a 100644
> >>  --- a/arch/mips/jz4740/time.c
> >>  +++ b/arch/mips/jz4740/time.c
> >>  @@ -113,7 +113,7 @@ static struct clock_event_device 
> >> jz4740_clockevent = {
> >>   #ifdef CONFIG_MACH_JZ4740
> >>   	.irq = JZ4740_IRQ_TCU0,
> >>   #endif
> >>  -#ifdef CONFIG_MACH_JZ4780
> >>  +#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
> >>   	.irq = JZ4780_IRQ_TCU2,
> >>   #endif
> >>   };
> >>  --
> >>  2.11.0
> >> 
> > 
> > MACH_INGENIC selects SYS_SUPPORTS_ZBOOT_UART16550, so I wonder whether
> > arch/mips/boot/compressed/uart-16550.c needs updating for JZ4770 like
> > commit ba9e72c2290f ("MIPS: Fix build with DEBUG_ZBOOT and 
> > MACH_JZ4780")
> > does for JZ4780.
> > 
> > Otherwise the non-DT bits look reasonable (I've not really looked
> > properly at the DT):
> > Reviewed-by: James Hogan <jhogan@kernel.org>
> > 
> > Cheers
> > James
> 
> I will fix it in a separate patch, if you don't mind.

Sure,

Cheers
James

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 15/15] MIPS: ingenic: Initial GCW Zero support

[Philippe Ombredanne]

Paul:

On Wed, Jan 10, 2018 at 11:59 PM, Paul Cercueil <paul@crapouillou.net> wrote:
> Hi Philippe,
>
> Le dim. 7 janv. 2018 à 17:18, Philippe Ombredanne <pombredanne@nexb.com> a
> écrit :
>>
>> On Fri, Jan 5, 2018 at 7:25 PM, Paul Cercueil <paul@crapouillou.net>
>> wrote:
>>>
>>>  The GCW Zero (http://www.gcw-zero.com) is a retro-gaming focused
>>>  handheld game console, successfully kickstarted in ~2012, running Linux.
>>>
>>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>>  Acked-by: Mathieu Malaterre <malat@debian.org>
>>>  ---
>>>   arch/mips/boot/dts/ingenic/Makefile |  1 +
>>>   arch/mips/boot/dts/ingenic/gcw0.dts | 62
>>> +++++++++++++++++++++++++++++++++++++
>>>   arch/mips/configs/gcw0_defconfig    | 27 ++++++++++++++++
>>>   arch/mips/jz4740/Kconfig            |  4 +++
>>>   4 files changed, 94 insertions(+)
>>>   create mode 100644 arch/mips/boot/dts/ingenic/gcw0.dts
>>>   create mode 100644 arch/mips/configs/gcw0_defconfig
>>>
>>>   v2: No change
>>>   v3: No change
>>>   v4: No change
>>>   v5: Use SPDX license identifier
>>>       Drop custom CROSS_COMPILE from defconfig
>>>   v6: Add "model" property in devicetree
>>
>>
>> For the use of SPDX tags for the whole patch set: thank you!
>>
>> Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
>
>
> Is your Acked-by for the whole patchset? Or just this one patch?

Sorry for the late reply!
This is  for the whole patchset for your use of SPDX tags.

-- 
Cordially
Philippe Ombredanne

Re: [PATCH v7 00/14] JZ4770 and GCW0 patchset

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 613 bytes --]

On Tue, Jan 16, 2018 at 04:47:50PM +0100, Paul Cercueil wrote:
> Hi Ralf,
> 
> Here is the V7 of my JZ4770 and GCW0 patch series.
> 
> What changed from V6:
> - In patch 10/14 I reverted a change that prevented the system
>   name/model from being correctly initialized
> - The patch dealing with the MMC DMA hardware issue has been dropped,
>   since we couldn't reproduce the corruption issue. I can always send a
>   separate patch if we find a way to reliably trigger the bug.
> - All the rest is untouched.

I've applied to my 4.16 branch.

Thanks
James

> 
> Greetings,
> -Paul
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]