* cs42xx8 errors?
@ 2017-09-14 6:02 Takashi Matsuzawa
2017-09-14 11:04 ` Takashi Matsuzawa
2017-09-21 22:40 ` Fabio Estevam
0 siblings, 2 replies; 10+ messages in thread
From: Takashi Matsuzawa @ 2017-09-14 6:02 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 989 bytes --]
Hello.
In combination of my attempt to use use-mainline-bsp option pyro with SABRE, I am getting following error lines in my console log.
This prevents me from doing further debug (since my console shows only these lines.)
I suspect it is related to audio device initialization, but I immediately have no idea where I should look into.
Any suggestion or comment is higly appreciated.
[ 66.449317] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.454307] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.461114] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.466101] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.473016] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.478058] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.485016] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.490051] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.528809] cs42xx8 1-0048: unsupported sysclk ratio
....
(does not stop)
[-- Attachment #2: Type: text/html, Size: 1702 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-14 6:02 cs42xx8 errors? Takashi Matsuzawa
@ 2017-09-14 11:04 ` Takashi Matsuzawa
2017-09-21 22:40 ` Fabio Estevam
1 sibling, 0 replies; 10+ messages in thread
From: Takashi Matsuzawa @ 2017-09-14 11:04 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1373 bytes --]
Hello.
I am currently trying this with imx6qsabreauto, and it should work?
(Or some other boards are more popular and and easier to to make it work - there are many i.mx6 based board types out there...)
________________________________
From: Takashi Matsuzawa
Sent: Thursday, September 14, 2017 3:02 PM
To: meta-freescale@yoctoproject.org
Subject: cs42xx8 errors?
Hello.
In combination of my attempt to use use-mainline-bsp option pyro with SABRE, I am getting following error lines in my console log.
This prevents me from doing further debug (since my console shows only these lines.)
I suspect it is related to audio device initialization, but I immediately have no idea where I should look into.
Any suggestion or comment is higly appreciated.
[ 66.449317] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.454307] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.461114] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.466101] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.473016] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.478058] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.485016] cs42xx8 1-0048: unsupported sysclk ratio
[ 66.490051] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
[ 66.528809] cs42xx8 1-0048: unsupported sysclk ratio
....
(does not stop)
[-- Attachment #2: Type: text/html, Size: 2844 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-14 6:02 cs42xx8 errors? Takashi Matsuzawa
2017-09-14 11:04 ` Takashi Matsuzawa
@ 2017-09-21 22:40 ` Fabio Estevam
2017-09-22 1:20 ` Takashi Matsuzawa
1 sibling, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2017-09-21 22:40 UTC (permalink / raw)
To: Takashi Matsuzawa; +Cc: meta-freescale
Hi Takashi,
On Thu, Sep 14, 2017 at 3:02 AM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
> Hello.
>
> In combination of my attempt to use use-mainline-bsp option pyro with SABRE,
> I am getting following error lines in my console log.
> This prevents me from doing further debug (since my console shows only these
> lines.)
>
> I suspect it is related to audio device initialization, but I immediately
> have no idea where I should look into.
> Any suggestion or comment is higly appreciated.
>
> [ 66.449317] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.454307] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.461114] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.466101] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.473016] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.478058] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.485016] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.490051] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.528809] cs42xx8 1-0048: unsupported sysclk ratio
Which kernel version is this?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-21 22:40 ` Fabio Estevam
@ 2017-09-22 1:20 ` Takashi Matsuzawa
2017-09-22 13:37 ` Fabio Estevam
0 siblings, 1 reply; 10+ messages in thread
From: Takashi Matsuzawa @ 2017-09-22 1:20 UTC (permalink / raw)
To: Fabio Estevam; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 2345 bytes --]
Hello.
This is linux-fslc (4.9), I am trying use-mainline-bsp option with SABRE AI board.
With base-board attached, I am seeing this error printed out in console log forever. Without base-board, it still issue error with the audio device (perhaps it is not working), but it remain silent so that I can login and do operations on command line.
I have learned that it may be linux-fslc lack of suppport for SABRE AI board and it may be expected, according to the community BSP release note.
(SABRE AI is under support by linux-fslc-imx).
Changing kernel / dtb / u-boot combinations may work, but I do not jump into a hole without enough knowlege.
So, I may continue trying with SABRE AI, well, but I also want to find a good alternative (i.MX6/7 board) for trying the linx-flsc keranel that is relatively safe with linux-fslc for now.
Is SABRE Lite (nitrogen6x) a better choice or any other popular one?
What is the popular board being used with the community..?
________________________________
From: Fabio Estevam <festevam@gmail.com>
Sent: Friday, September 22, 2017 7:40 AM
To: Takashi Matsuzawa
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] cs42xx8 errors?
Hi Takashi,
On Thu, Sep 14, 2017 at 3:02 AM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
> Hello.
>
> In combination of my attempt to use use-mainline-bsp option pyro with SABRE,
> I am getting following error lines in my console log.
> This prevents me from doing further debug (since my console shows only these
> lines.)
>
> I suspect it is related to audio device initialization, but I immediately
> have no idea where I should look into.
> Any suggestion or comment is higly appreciated.
>
> [ 66.449317] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.454307] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.461114] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.466101] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.473016] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.478058] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.485016] cs42xx8 1-0048: unsupported sysclk ratio
> [ 66.490051] cs42xx8 1-0048: ASoC: can't set cs42888 hw params: -22
> [ 66.528809] cs42xx8 1-0048: unsupported sysclk ratio
Which kernel version is this?
[-- Attachment #2: Type: text/html, Size: 3559 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-22 1:20 ` Takashi Matsuzawa
@ 2017-09-22 13:37 ` Fabio Estevam
2017-09-26 7:31 ` Takashi Matsuzawa
2017-09-26 16:37 ` Fabio Estevam
0 siblings, 2 replies; 10+ messages in thread
From: Fabio Estevam @ 2017-09-22 13:37 UTC (permalink / raw)
To: Takashi Matsuzawa; +Cc: meta-freescale
On Thu, Sep 21, 2017 at 10:20 PM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
>
> Hello.
> This is linux-fslc (4.9), I am trying use-mainline-bsp option with SABRE AI
> board.
Could you try with kernel 4.13.3 or 4.14-rc1?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-22 13:37 ` Fabio Estevam
@ 2017-09-26 7:31 ` Takashi Matsuzawa
2017-09-26 13:18 ` Otavio Salvador
2017-09-26 16:37 ` Fabio Estevam
1 sibling, 1 reply; 10+ messages in thread
From: Takashi Matsuzawa @ 2017-09-26 7:31 UTC (permalink / raw)
To: Fabio Estevam; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]
Hello.
I tried some to build my image with meta-freescale master branch (so that linux-fslc 4.13 will be included, hopefully with necessary changes), but having problem with build.
I encounter build error with lttng-modules/2.9.1-r1 as below.
| .../lttng-modules/2.9.1-r0/lttng-modules-2.9.1/wrapper/kref.h: In function 'lttng_kref_get':
| .../lttng-modules/2.9.1-r0/lttng-modules-2.9.1/wrapper/kref.h:39:24: error: passing argument 1 of 'atomic_add_unless' from incompatible
pointer type [-Werror=incompatible-pointer-types]
| if (atomic_add_unless(&kref->refcount, 1, INT_MAX) != INT_MAX) {
I locally fixed a few of these errors by looking into the latest source of lttng-modules, which had something like below which gave me some clue, but I feel I should check if this is a right approach before going further.
>#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,11,0))
Is this possibly a problem in my configuration?
________________________________
From: Fabio Estevam <festevam@gmail.com>
Sent: Friday, September 22, 2017 10:37 PM
To: Takashi Matsuzawa
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] cs42xx8 errors?
On Thu, Sep 21, 2017 at 10:20 PM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
>
> Hello.
> This is linux-fslc (4.9), I am trying use-mainline-bsp option with SABRE AI
> board.
Could you try with kernel 4.13.3 or 4.14-rc1?
[-- Attachment #2: Type: text/html, Size: 4719 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-26 7:31 ` Takashi Matsuzawa
@ 2017-09-26 13:18 ` Otavio Salvador
0 siblings, 0 replies; 10+ messages in thread
From: Otavio Salvador @ 2017-09-26 13:18 UTC (permalink / raw)
To: Takashi Matsuzawa; +Cc: meta-freescale
Hello,
On Tue, Sep 26, 2017 at 4:31 AM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
> I tried some to build my image with meta-freescale master branch (so that
> linux-fslc 4.13 will be included, hopefully with necessary changes), but
> having problem with build.
>
>
> I encounter build error with lttng-modules/2.9.1-r1 as below.
>
>
> | .../lttng-modules/2.9.1-r0/lttng-modules-2.9.1/wrapper/kref.h: In function
> 'lttng_kref_get':
> | .../lttng-modules/2.9.1-r0/lttng-modules-2.9.1/wrapper/kref.h:39:24:
> error: passing argument 1 of 'atomic_add_unless' from incompatible
> pointer type [-Werror=incompatible-pointer-types]
> | if (atomic_add_unless(&kref->refcount, 1, INT_MAX) != INT_MAX) {
>
>
> I locally fixed a few of these errors by looking into the latest source of
> lttng-modules, which had something like below which gave me some clue, but I
> feel I should check if this is a right approach before going further.
>
>
>>#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,11,0))
>
> Is this possibly a problem in my configuration?
No; it is lttng needing fix.
Can you disable lttng support to test?
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-22 13:37 ` Fabio Estevam
2017-09-26 7:31 ` Takashi Matsuzawa
@ 2017-09-26 16:37 ` Fabio Estevam
2017-09-27 1:14 ` Takashi Matsuzawa
1 sibling, 1 reply; 10+ messages in thread
From: Fabio Estevam @ 2017-09-26 16:37 UTC (permalink / raw)
To: Takashi Matsuzawa; +Cc: meta-freescale
Hi Takashi,
On Fri, Sep 22, 2017 at 10:37 AM, Fabio Estevam <festevam@gmail.com> wrote:
> On Thu, Sep 21, 2017 at 10:20 PM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
>>
>> Hello.
>> This is linux-fslc (4.9), I am trying use-mainline-bsp option with SABRE AI
>> board.
>
> Could you try with kernel 4.13.3 or 4.14-rc1?
I have just booted a imx6qp sabreauto with 4.13.3 kernel and I do not
see any codec probe error:
...
[ 2.936534] fsl-asoc-card sound-cs42888: cs42888 <-> 2024000.esai mapping ok
[ 2.946820] fsl-asoc-card sound-cs42888: snd-soc-dummy-dai <->
2034000.asrc mapping ok
[ 2.955025] fsl-asoc-card sound-cs42888: cs42888 <-> 2024000.esai mapping ok
....
[ 3.023965] ALSA device list:
[ 3.026960] #0: imx-spdif
[ 3.029814] #1: cs42888-audio
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-26 16:37 ` Fabio Estevam
@ 2017-09-27 1:14 ` Takashi Matsuzawa
2017-09-27 17:50 ` Fabio Estevam
0 siblings, 1 reply; 10+ messages in thread
From: Takashi Matsuzawa @ 2017-09-27 1:14 UTC (permalink / raw)
To: Fabio Estevam; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1357 bytes --]
Hello.
Thank you for your confirmation.
>imx6qp sabreauto
Well I am using 6Q AI (not Plus), so it may be the difference (or not).
Please let me take time to try with the followings.
1) Nitrogen6x with my customized image (yes, I am getting my Nit6Q)
2) 6Q AI with (unmodified) community-BSP based image.
________________________________
From: Fabio Estevam <festevam@gmail.com>
Sent: Wednesday, September 27, 2017 1:37 AM
To: Takashi Matsuzawa
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] cs42xx8 errors?
Hi Takashi,
On Fri, Sep 22, 2017 at 10:37 AM, Fabio Estevam <festevam@gmail.com> wrote:
> On Thu, Sep 21, 2017 at 10:20 PM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
>>
>> Hello.
>> This is linux-fslc (4.9), I am trying use-mainline-bsp option with SABRE AI
>> board.
>
> Could you try with kernel 4.13.3 or 4.14-rc1?
I have just booted a imx6qp sabreauto with 4.13.3 kernel and I do not
see any codec probe error:
...
[ 2.936534] fsl-asoc-card sound-cs42888: cs42888 <-> 2024000.esai mapping ok
[ 2.946820] fsl-asoc-card sound-cs42888: snd-soc-dummy-dai <->
2034000.asrc mapping ok
[ 2.955025] fsl-asoc-card sound-cs42888: cs42888 <-> 2024000.esai mapping ok
....
[ 3.023965] ALSA device list:
[ 3.026960] #0: imx-spdif
[ 3.029814] #1: cs42888-audio
[-- Attachment #2: Type: text/html, Size: 2532 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: cs42xx8 errors?
2017-09-27 1:14 ` Takashi Matsuzawa
@ 2017-09-27 17:50 ` Fabio Estevam
0 siblings, 0 replies; 10+ messages in thread
From: Fabio Estevam @ 2017-09-27 17:50 UTC (permalink / raw)
To: Takashi Matsuzawa; +Cc: meta-freescale
On Tue, Sep 26, 2017 at 10:14 PM, Takashi Matsuzawa <tmatsuzawa@xevo.com> wrote:
> Hello.
> Thank you for your confirmation.
>
>>imx6qp sabreauto
>
> Well I am using 6Q AI (not Plus), so it may be the difference (or not).
The audio part is common, so should not be any difference.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-09-27 17:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-14 6:02 cs42xx8 errors? Takashi Matsuzawa
2017-09-14 11:04 ` Takashi Matsuzawa
2017-09-21 22:40 ` Fabio Estevam
2017-09-22 1:20 ` Takashi Matsuzawa
2017-09-22 13:37 ` Fabio Estevam
2017-09-26 7:31 ` Takashi Matsuzawa
2017-09-26 13:18 ` Otavio Salvador
2017-09-26 16:37 ` Fabio Estevam
2017-09-27 1:14 ` Takashi Matsuzawa
2017-09-27 17:50 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.