* USB OTG on mx51
@ 2014-03-24 23:35 Fabio Estevam
2014-03-25 1:24 ` Fabio Estevam
0 siblings, 1 reply; 2+ messages in thread
From: Fabio Estevam @ 2014-03-24 23:35 UTC (permalink / raw)
To: linux-arm-kernel
Hi Denis/Eric,
Have you managed to get USB OTG functional on the eukrea-cpuimx51 board?
USB host1 works fine on mx51evk with this patch:
http://pastebin.com/Z2FYSW8m
,but g_ether is not working on the USB OTG port yet. It is like the PC
does not notice that the USB cable has been inserted.
Do we need to change usbmisc_imx.c ?
Any ideas?
Thanks,
Fabio Estevam
^ permalink raw reply [flat|nested] 2+ messages in thread
* USB OTG on mx51
2014-03-24 23:35 USB OTG on mx51 Fabio Estevam
@ 2014-03-25 1:24 ` Fabio Estevam
0 siblings, 0 replies; 2+ messages in thread
From: Fabio Estevam @ 2014-03-25 1:24 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 24, 2014 at 8:35 PM, Fabio Estevam <festevam@gmail.com> wrote:
> Hi Denis/Eric,
>
> Have you managed to get USB OTG functional on the eukrea-cpuimx51 board?
>
> USB host1 works fine on mx51evk with this patch:
> http://pastebin.com/Z2FYSW8m
>
> ,but g_ether is not working on the USB OTG port yet. It is like the PC
> does not notice that the USB cable has been inserted.
>
> Do we need to change usbmisc_imx.c ?
Yes, this is needed indeed. I got it working and will submit the patches soon.
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-03-25 1:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-03-24 23:35 USB OTG on mx51 Fabio Estevam
2014-03-25 1:24 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.