* [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-02 21:35 ` Vitor Massaru Iha
0 siblings, 0 replies; 6+ messages in thread
From: Vitor Massaru Iha @ 2020-03-02 21:35 UTC (permalink / raw)
To: devicetree, linux-arm-kernel
Cc: robh+dt, mark.rutland, shawnguo, s.hauer, festevam,
marco.franchi, linux-imx, lkcamp
It was based on Google Source Code for Coral Edge TPU Mendel release:
https://coral.googlesource.com/linux-imx/
It was tested on Coral Dev Board using this command:
sudo stress --cpu 4 --timeout 3600
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v2:
* Fix underscore in property name;
* Add pinctrl entry for gpio-fan;
* Removes undocumented property;
v3:
* Fix subject pattern;
* Fix order of pinctrl entries;
* Fix MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 flags;
* Typo pattern (from "gpiofanp" to "gpiofangrp");
* Fix tabs on MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 line;
BR,
Vitor
---
.../boot/dts/freescale/imx8mq-phanbell.dts | 64 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +-
2 files changed, 65 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 3f2a489a4ad8..e20032110e0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -35,6 +35,16 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 8600 1>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_fan>;
+ status = "okay";
+ };
};
&A53_0 {
@@ -254,6 +264,12 @@
};
&iomuxc {
+ pinctrl_gpio_fan: gpiofangrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x16
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
@@ -374,3 +390,51 @@
>;
};
};
+
+&cpu_thermal {
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: trip1 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ fan_toggle0: trip4 {
+ temperature = <65000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 0 1>; /* Exclude highest OPP */
+ };
+
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&A53_0 0 2>; /* Exclude two highest OPPs */
+ };
+
+ map4 {
+ trip = <&fan_toggle0>;
+ cooling-device = <&fan 0 1>;
+ };
+ };
+};
+
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a1e83922c71..a3bb17a6b9df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -198,7 +198,7 @@
};
thermal-zones {
- cpu-thermal {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 0>;
--
2.21.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-02 21:35 ` Vitor Massaru Iha
0 siblings, 0 replies; 6+ messages in thread
From: Vitor Massaru Iha @ 2020-03-02 21:35 UTC (permalink / raw)
To: devicetree, linux-arm-kernel
Cc: mark.rutland, lkcamp, shawnguo, s.hauer, robh+dt, linux-imx,
marco.franchi, festevam
It was based on Google Source Code for Coral Edge TPU Mendel release:
https://coral.googlesource.com/linux-imx/
It was tested on Coral Dev Board using this command:
sudo stress --cpu 4 --timeout 3600
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v2:
* Fix underscore in property name;
* Add pinctrl entry for gpio-fan;
* Removes undocumented property;
v3:
* Fix subject pattern;
* Fix order of pinctrl entries;
* Fix MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 flags;
* Typo pattern (from "gpiofanp" to "gpiofangrp");
* Fix tabs on MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 line;
BR,
Vitor
---
.../boot/dts/freescale/imx8mq-phanbell.dts | 64 +++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +-
2 files changed, 65 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 3f2a489a4ad8..e20032110e0e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -35,6 +35,16 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 8600 1>;
+ gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_fan>;
+ status = "okay";
+ };
};
&A53_0 {
@@ -254,6 +264,12 @@
};
&iomuxc {
+ pinctrl_gpio_fan: gpiofangrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x16
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
@@ -374,3 +390,51 @@
>;
};
};
+
+&cpu_thermal {
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: trip1 {
+ temperature = <80000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip3 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+
+ fan_toggle0: trip4 {
+ temperature = <65000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 0 1>; /* Exclude highest OPP */
+ };
+
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&A53_0 0 2>; /* Exclude two highest OPPs */
+ };
+
+ map4 {
+ trip = <&fan_toggle0>;
+ cooling-device = <&fan 0 1>;
+ };
+ };
+};
+
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a1e83922c71..a3bb17a6b9df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -198,7 +198,7 @@
};
thermal-zones {
- cpu-thermal {
+ cpu_thermal: cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 0>;
--
2.21.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
2020-03-02 21:35 ` Vitor Massaru Iha
@ 2020-03-02 22:46 ` Fabio Estevam
-1 siblings, 0 replies; 6+ messages in thread
From: Fabio Estevam @ 2020-03-02 22:46 UTC (permalink / raw)
To: Vitor Massaru Iha
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Marco Franchi, NXP Linux Team, lkcamp
Hi Vitor,
On Mon, Mar 2, 2020 at 6:36 PM Vitor Massaru Iha <vitor@massaru.org> wrote:
> +&cpu_thermal {
You missed to place cpu_thermal prior to i2c1 to keep the nodes sorted.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-02 22:46 ` Fabio Estevam
0 siblings, 0 replies; 6+ messages in thread
From: Fabio Estevam @ 2020-03-02 22:46 UTC (permalink / raw)
To: Vitor Massaru Iha
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
lkcamp, Sascha Hauer, Rob Herring, NXP Linux Team, Marco Franchi,
Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
Hi Vitor,
On Mon, Mar 2, 2020 at 6:36 PM Vitor Massaru Iha <vitor@massaru.org> wrote:
> +&cpu_thermal {
You missed to place cpu_thermal prior to i2c1 to keep the nodes sorted.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
2020-03-02 22:46 ` Fabio Estevam
@ 2020-03-03 0:39 ` Vitor Massaru Iha
-1 siblings, 0 replies; 6+ messages in thread
From: Vitor Massaru Iha @ 2020-03-03 0:39 UTC (permalink / raw)
To: Fabio Estevam
Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
Rob Herring, Mark Rutland, Shawn Guo, Sascha Hauer,
Marco Franchi, NXP Linux Team, lkcamp
Hi Fabio,
On Mon, 2020-03-02 at 19:46 -0300, Fabio Estevam wrote:
> Hi Vitor,
>
> On Mon, Mar 2, 2020 at 6:36 PM Vitor Massaru Iha <vitor@massaru.org>
> wrote:
>
> > +&cpu_thermal {
>
> You missed to place cpu_thermal prior to i2c1 to keep the nodes
> sorted.
Sorry my bad, I'll fix it.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-03 0:39 ` Vitor Massaru Iha
0 siblings, 0 replies; 6+ messages in thread
From: Vitor Massaru Iha @ 2020-03-03 0:39 UTC (permalink / raw)
To: Fabio Estevam
Cc: Mark Rutland,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
lkcamp, Sascha Hauer, Rob Herring, NXP Linux Team, Marco Franchi,
Shawn Guo,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
Hi Fabio,
On Mon, 2020-03-02 at 19:46 -0300, Fabio Estevam wrote:
> Hi Vitor,
>
> On Mon, Mar 2, 2020 at 6:36 PM Vitor Massaru Iha <vitor@massaru.org>
> wrote:
>
> > +&cpu_thermal {
>
> You missed to place cpu_thermal prior to i2c1 to keep the nodes
> sorted.
Sorry my bad, I'll fix it.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-03-03 0:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-02 21:35 [PATCH v3] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support Vitor Massaru Iha
2020-03-02 21:35 ` Vitor Massaru Iha
2020-03-02 22:46 ` Fabio Estevam
2020-03-02 22:46 ` Fabio Estevam
2020-03-03 0:39 ` Vitor Massaru Iha
2020-03-03 0:39 ` Vitor Massaru Iha
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.