* u-boot v2022.01 and Arria-10 socdk not booting
@ 2022-03-16 12:25 Marcel Gielen [Celestia-STS]
2022-03-16 12:42 ` Fabio Estevam
0 siblings, 1 reply; 2+ messages in thread
From: Marcel Gielen [Celestia-STS] @ 2022-03-16 12:25 UTC (permalink / raw)
To: u-boot
I am working on an Enclustra mercury board and had some issues with booting, which stopped after (successful) FPGA configuration. (Console: FPGA: Enter user mode is the last line printed)
Since we also have an Arria10 socdk available, I decided to try that one. For the sockdk I have a working sdcard, which also includes a FitImage containing a peripheral and core rbf. I tried the card (boots)
replaced the bootloader with a vanilla built socfpga_arria10_defconfig and booting seems to stop at a similar point. Last console message: "early release succeeded" and then it stops.
Am I overlooking something, or are there issues with mainline u-boot and arria10 ?
Any suggestions where to look ?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: u-boot v2022.01 and Arria-10 socdk not booting
2022-03-16 12:25 u-boot v2022.01 and Arria-10 socdk not booting Marcel Gielen [Celestia-STS]
@ 2022-03-16 12:42 ` Fabio Estevam
0 siblings, 0 replies; 2+ messages in thread
From: Fabio Estevam @ 2022-03-16 12:42 UTC (permalink / raw)
To: Marcel Gielen [Celestia-STS]; +Cc: u-boot, Dinh Nguyen, Chin Liang See
Adding the arria10-socdk board maintainers on Cc
On Wed, Mar 16, 2022 at 9:25 AM Marcel Gielen [Celestia-STS]
<M.Gielen@celestia-sts.com> wrote:
>
> I am working on an Enclustra mercury board and had some issues with booting, which stopped after (successful) FPGA configuration. (Console: FPGA: Enter user mode is the last line printed)
>
> Since we also have an Arria10 socdk available, I decided to try that one. For the sockdk I have a working sdcard, which also includes a FitImage containing a peripheral and core rbf. I tried the card (boots)
> replaced the bootloader with a vanilla built socfpga_arria10_defconfig and booting seems to stop at a similar point. Last console message: "early release succeeded" and then it stops.
>
>
> Am I overlooking something, or are there issues with mainline u-boot and arria10 ?
>
>
> Any suggestions where to look ?
>
>
>
>
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-03-16 12:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-16 12:25 u-boot v2022.01 and Arria-10 socdk not booting Marcel Gielen [Celestia-STS]
2022-03-16 12:42 ` Fabio Estevam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.