* [PATCH v2 0/8] imx8: switch missing boards to binman
@ 2022-11-04 15:03 Oliver Graute
2022-11-04 15:03 ` [PATCH v5 1/8] imx: imx8qm-rom7720: switch " Oliver Graute
` (8 more replies)
0 siblings, 9 replies; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Denys Drozdov, Gaurav Jain, Ye Li,
Horia Geantă,
u-boot
This patchsets switches the remaining imx8 boards to binman.
Oliver Graute (8):
imx: imx8qm-rom7720: switch to binman
imx: imx8qm: cgtqmx8: switch to binman
imx: imx8qxp: imx8qxp_mek switch to binman
imx: imx8qm: imx8qm_mek switch to binman
imx: imx8qxp: giedi switch to binman
imx: imx8qxp: deneb switch to binman
imx: imx8x: colibri: switch to binman
imx: imx8: apalis: switch to binman
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 2 +
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 +
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 2 +
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 2 +
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/dts/imx8qm-rom7720-a1.dts | 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 135 ++++++++++++++++++
arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi | 2 +
arch/arm/dts/imx8qxp-u-boot.dtsi | 133 +++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 8 ++
.../advantech/imx8qm_rom7720_a1/imximage.cfg | 4 +-
board/congatec/cgtqmx8/imximage.cfg | 4 +-
board/freescale/imx8qm_mek/README | 2 +-
board/freescale/imx8qxp_mek/imximage.cfg | 3 +-
board/siemens/capricorn/imximage.cfg | 2 +-
configs/apalis-imx8_defconfig | 1 +
configs/cgtqmx8_defconfig | 4 +-
configs/colibri-imx8x_defconfig | 1 +
configs/deneb_defconfig | 2 +
configs/giedi_defconfig | 2 +
configs/imx8qm_mek_defconfig | 2 +
configs/imx8qm_rom7720_a1_4G_defconfig | 3 +-
configs/imx8qxp_mek_defconfig | 2 +
doc/board/advantech/imx8qm-rom7720-a1.rst | 3 +-
doc/board/congatec/cgtqmx8.rst | 3 +-
doc/board/nxp/imx8qxp_mek.rst | 2 +-
26 files changed, 313 insertions(+), 15 deletions(-)
create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8qxp-u-boot.dtsi
--
2.17.1
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v5 1/8] imx: imx8qm-rom7720: switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v6 2/8] imx: imx8qm: cgtqmx8: " Oliver Graute
` (7 subsequent siblings)
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Horia Geantă,
Denys Drozdov, Ye Li, Gaurav Jain, Marcel Ziswiler, u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
Changes for v5:
- renamed ftd to @fdt-SEQ
Changes for v4
- remove hardcoded dtb filename
- added CONFIG_FIT_EXTERNAL_OFFSET
Changes for v3
- just rebased to master
Changes for v2
- just rebased to master
arch/arm/dts/imx8qm-rom7720-a1.dts | 1 +
arch/arm/dts/imx8qm-u-boot.dtsi | 133 ++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
.../advantech/imx8qm_rom7720_a1/imximage.cfg | 4 +-
configs/imx8qm_rom7720_a1_4G_defconfig | 3 +-
doc/board/advantech/imx8qm-rom7720-a1.rst | 3 +-
6 files changed, 140 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/dts/imx8qm-u-boot.dtsi
diff --git a/arch/arm/dts/imx8qm-rom7720-a1.dts b/arch/arm/dts/imx8qm-rom7720-a1.dts
index d1f2fff869..332d441c6d 100644
--- a/arch/arm/dts/imx8qm-rom7720-a1.dts
+++ b/arch/arm/dts/imx8qm-rom7720-a1.dts
@@ -10,6 +10,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Advantech iMX8QM Qseven series";
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
new file mode 100644
index 0000000000..9b382f4d11
--- /dev/null
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qm-val-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qm-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ @fdt-SEQ {
+ compression = "none";
+ description = "NAME";
+ type = "flat_dt";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "@config-DEFAULT-SEQ";
+
+ binman_configuration: @config-SEQ {
+ description = "NAME";
+ fdt = "fdt-SEQ";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index abb03340d8..71abbb33ea 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -82,6 +82,7 @@ config TARGET_CONGA_QMX8
config TARGET_IMX8QM_ROM7720_A1
bool "Support i.MX8QM ROM-7720-A1"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/advantech/imx8qm_rom7720_a1/imximage.cfg b/board/advantech/imx8qm_rom7720_a1/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/advantech/imx8qm_rom7720_a1/imximage.cfg
+++ b/board/advantech/imx8qm_rom7720_a1/imximage.cfg
@@ -4,8 +4,8 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/imx8qm_rom7720_a1_4G_defconfig b/configs/imx8qm_rom7720_a1_4G_defconfig
index 3b099761a9..4b7ed6df01 100644
--- a/configs/imx8qm_rom7720_a1_4G_defconfig
+++ b/configs/imx8qm_rom7720_a1_4G_defconfig
@@ -20,8 +20,9 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
diff --git a/doc/board/advantech/imx8qm-rom7720-a1.rst b/doc/board/advantech/imx8qm-rom7720-a1.rst
index bd4be1dbeb..953cf01fde 100644
--- a/doc/board/advantech/imx8qm-rom7720-a1.rst
+++ b/doc/board/advantech/imx8qm-rom7720-a1.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make imx8qm_rom7720_a1_4G_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v6 2/8] imx: imx8qm: cgtqmx8: switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-04 15:03 ` [PATCH v5 1/8] imx: imx8qm-rom7720: switch " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v2 3/8] imx: imx8qxp: imx8qxp_mek " Oliver Graute
` (6 subsequent siblings)
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Gaurav Jain, Marcel Ziswiler, Ye Li, Denys Drozdov,
Horia Geantă,
u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
Changes for v6
- added CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
Changes for v5
- added CONFIG_FIT_EXTERNAL_OFFSET
Changes for v4
- rebased on master
Changes for v3
-added Reviewed-by
- rebased on master
arch/arm/dts/imx8qm-cgtqmx8.dts | 1 +
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/congatec/cgtqmx8/imximage.cfg | 4 ++--
configs/cgtqmx8_defconfig | 4 +++-
doc/board/congatec/cgtqmx8.rst | 3 +--
5 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/imx8qm-cgtqmx8.dts b/arch/arm/dts/imx8qm-cgtqmx8.dts
index 555c357f6f..919d00644f 100644
--- a/arch/arm/dts/imx8qm-cgtqmx8.dts
+++ b/arch/arm/dts/imx8qm-cgtqmx8.dts
@@ -12,6 +12,7 @@
/memreserve/ 0x80000000 0x00020000;
#include "fsl-imx8qm.dtsi"
+#include "imx8qm-u-boot.dtsi"
/ {
model = "Congatec QMX8 Qseven series";
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index a7e3af57dc..d423cf8563 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -76,6 +76,7 @@ config TARGET_IMX8QM_MEK
config TARGET_CONGA_QMX8
bool "Support congatec conga-QMX8 board"
+ select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
diff --git a/board/congatec/cgtqmx8/imximage.cfg b/board/congatec/cgtqmx8/imximage.cfg
index 5ecde0c530..43035088e3 100644
--- a/board/congatec/cgtqmx8/imximage.cfg
+++ b/board/congatec/cgtqmx8/imximage.cfg
@@ -4,8 +4,8 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
+
/* SoC type IMX8QM */
SOC_TYPE IMX8QM
/* Append seco container image */
diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig
index ddc65a06b9..4d1dfe4212 100644
--- a/configs/cgtqmx8_defconfig
+++ b/configs/cgtqmx8_defconfig
@@ -20,8 +20,10 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
+# CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
diff --git a/doc/board/congatec/cgtqmx8.rst b/doc/board/congatec/cgtqmx8.rst
index bccdef2f16..16711a844d 100644
--- a/doc/board/congatec/cgtqmx8.rst
+++ b/doc/board/congatec/cgtqmx8.rst
@@ -57,8 +57,7 @@ Build U-Boot
$ export ATF_LOAD_ADDR=0x80000000
$ export BL33_LOAD_ADDR=0x80020000
$ make cgtqmx8_defconfig
- $ make u-boot.bin
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v2 3/8] imx: imx8qxp: imx8qxp_mek switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-04 15:03 ` [PATCH v5 1/8] imx: imx8qm-rom7720: switch " Oliver Graute
2022-11-04 15:03 ` [PATCH v6 2/8] imx: imx8qm: cgtqmx8: " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:25 ` sbabic
2022-11-04 15:03 ` [PATCH v2 4/8] imx: imx8qm: imx8qm_mek " Oliver Graute
` (5 subsequent siblings)
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Denys Drozdov, Ye Li, Marcel Ziswiler, Horia Geantă,
Gaurav Jain, u-boot
Switch to use binman pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
Changes v2:
- use common imx8qxp-u-boot.dtsi
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 2 +
arch/arm/dts/imx8qxp-u-boot.dtsi | 133 +++++++++++++++++++++++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/freescale/imx8qxp_mek/imximage.cfg | 3 +-
configs/imx8qxp_mek_defconfig | 2 +
doc/board/nxp/imx8qxp_mek.rst | 2 +-
6 files changed, 140 insertions(+), 3 deletions(-)
create mode 100644 arch/arm/dts/imx8qxp-u-boot.dtsi
diff --git a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
index ae037c7550..2218e3ea74 100644
--- a/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2018, 2021 NXP
*/
+#include "imx8qxp-u-boot.dtsi"
+
&{/imx8qx-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
new file mode 100644
index 0000000000..01183f8ade
--- /dev/null
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018, 2021 NXP
+ */
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+&binman {
+#ifdef CONFIG_SPL
+ u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
+ filename = "u-boot-spl-ddr.bin";
+ pad-byte = <0xff>;
+
+ u-boot-spl {
+ align-end = <4>;
+ filename = "u-boot-spl.bin";
+ };
+ };
+
+ spl {
+ filename = "spl.bin";
+
+ mkimage {
+ args = "-n spl/u-boot-spl.cfgout -T imx8image -e 0x100000";
+
+ blob {
+ filename = "u-boot-spl-ddr.bin";
+ };
+ };
+ };
+#endif
+
+ itb {
+ filename = "u-boot.itb";
+
+ fit {
+ description = "Configuration to load ATF before U-Boot";
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ fit,fdt-list = "of-list";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ arch = "arm64";
+ compression = "none";
+ description = "U-Boot (64-bit)";
+ load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
+
+ uboot-blob {
+ filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
+ };
+ };
+
+ atf {
+ arch = "arm64";
+ compression = "none";
+ description = "ARM Trusted Firmware";
+ entry = <0x00910000>;
+ load = <0x00091000>;
+ type = "firmware";
+
+ atf-blob {
+ filename = "bl31.bin";
+ type = "atf-bl31";
+ };
+ };
+
+ scfw {
+ arch = "arm64";
+ compression = "none";
+ description = "System Controler Firmware";
+ type = "firmware";
+
+ scfw_blob {
+ filename = "mx8qx-mek-scfw-tcm.bin";
+ type = "blob-ext";
+ };
+ };
+
+ seco {
+ arch = "arm64";
+ compression = "none";
+ description = "Seco Firmware";
+ type = "firmware";
+
+ seco_blob {
+ filename = "mx8qxc0-ahab-container.img";
+ type = "blob-ext";
+ };
+ };
+
+ fdt {
+ type = "flat_dt";
+ compression = "none";
+
+ uboot-fdt-blob {
+ filename = "u-boot.dtb";
+ type = "blob-ext";
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+
+ conf {
+ fdt = "fdt";
+ firmware = "uboot";
+ loadables = "atf";
+ };
+ };
+ };
+ };
+
+ imx-boot {
+ filename = "flash.bin";
+ pad-byte = <0x00>;
+
+ spl {
+ filename = "spl.bin";
+ offset = <0x0>;
+ type = "blob-ext";
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index d423cf8563..23a7fcf361 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -90,6 +90,7 @@ config TARGET_IMX8QM_ROM7720_A1
config TARGET_IMX8QXP_MEK
bool "Support i.MX8QXP MEK board"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QXP
select FSL_CAAM
diff --git a/board/freescale/imx8qxp_mek/imximage.cfg b/board/freescale/imx8qxp_mek/imximage.cfg
index 89a4736ab7..88d6955a9e 100644
--- a/board/freescale/imx8qxp_mek/imximage.cfg
+++ b/board/freescale/imx8qxp_mek/imximage.cfg
@@ -7,8 +7,7 @@
*/
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig
index 73600c5a8c..0e22f13c7f 100644
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
diff --git a/doc/board/nxp/imx8qxp_mek.rst b/doc/board/nxp/imx8qxp_mek.rst
index 215627cfa6..708db1952e 100644
--- a/doc/board/nxp/imx8qxp_mek.rst
+++ b/doc/board/nxp/imx8qxp_mek.rst
@@ -50,7 +50,7 @@ Build U-Boot
.. code-block:: bash
$ make imx8qxp_mek_defconfig
- $ make flash.bin
+ $ make
Flash the binary into the SD card
---------------------------------
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v2 4/8] imx: imx8qm: imx8qm_mek switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
` (2 preceding siblings ...)
2022-11-04 15:03 ` [PATCH v2 3/8] imx: imx8qxp: imx8qxp_mek " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v2 5/8] imx: imx8qxp: giedi " Oliver Graute
` (4 subsequent siblings)
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Denys Drozdov, Ye Li, Horia Geantă,
Gaurav Jain, u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi | 2 ++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/freescale/imx8qm_mek/README | 2 +-
configs/imx8qm_mek_defconfig | 2 ++
4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
index a95209e141..eefdccf992 100644
--- a/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-mek-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2018, 2021 NXP
*/
+#include "imx8qm-u-boot.dtsi"
+
&{/imx8qm-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 23a7fcf361..4ccbabf506 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -68,6 +68,7 @@ config TARGET_GIEDI
config TARGET_IMX8QM_MEK
bool "Support i.MX8QM MEK board"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QM
select FSL_CAAM
diff --git a/board/freescale/imx8qm_mek/README b/board/freescale/imx8qm_mek/README
index 570ed7e210..b1a4c6cc82 100644
--- a/board/freescale/imx8qm_mek/README
+++ b/board/freescale/imx8qm_mek/README
@@ -40,7 +40,7 @@ And copy the following firmwares to U-Boot folder:
Build U-Boot
============
$ make imx8qm_mek_defconfig
-$ make flash.bin
+$ make
Flash the binary into the SD card
=================================
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index b973b809be..25b51cf1ec 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -23,6 +23,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v2 5/8] imx: imx8qxp: giedi switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
` (3 preceding siblings ...)
2022-11-04 15:03 ` [PATCH v2 4/8] imx: imx8qm: imx8qm_mek " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:25 ` sbabic
2022-11-04 15:03 ` [PATCH v1 6/8] imx: imx8qxp: deneb " Oliver Graute
` (3 subsequent siblings)
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Anatolij Gustschin, Ye Li, Denys Drozdov, Marcel Ziswiler,
Gaurav Jain, Horia Geantă,
u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
Changes v2:
use common imx8qxp-u-boot.dtsi
arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi | 2 ++
arch/arm/mach-imx/imx8/Kconfig | 1 +
board/siemens/capricorn/imximage.cfg | 2 +-
configs/giedi_defconfig | 2 ++
4 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
index 1cf58fc3f9..37bdc26cd3 100644
--- a/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-capricorn-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2019 Siemens AG
*/
+#include "imx8qxp-u-boot.dtsi"
+
&{/imx8qx-pm} {
u-boot,dm-spl;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 4ccbabf506..63d99ea23e 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -62,6 +62,7 @@ config TARGET_DENEB
config TARGET_GIEDI
bool "Support i.MX8QXP Capricorn Giedi board"
+ select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
diff --git a/board/siemens/capricorn/imximage.cfg b/board/siemens/capricorn/imximage.cfg
index fa871bac21..4350e2967c 100644
--- a/board/siemens/capricorn/imximage.cfg
+++ b/board/siemens/capricorn/imximage.cfg
@@ -8,7 +8,7 @@
/* Boot from SD, sector size 0x400 */
-BOOT_FROM SD 0x400
+BOOT_FROM sd
/* SoC type IMX8QX */
SOC_TYPE IMX8QX
/* Append seco container image */
diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig
index ab7fa51172..fdc6b0b2b3 100644
--- a/configs/giedi_defconfig
+++ b/configs/giedi_defconfig
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v1 6/8] imx: imx8qxp: deneb switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
` (4 preceding siblings ...)
2022-11-04 15:03 ` [PATCH v2 5/8] imx: imx8qxp: giedi " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v2 7/8] imx: imx8x: colibri: " Oliver Graute
` (2 subsequent siblings)
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Anatolij Gustschin, Gaurav Jain, Marcel Ziswiler,
Horia Geantă,
Denys Drozdov, Ye Li, u-boot
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/mach-imx/imx8/Kconfig | 1 +
configs/deneb_defconfig | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 63d99ea23e..018b87b85b 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -56,6 +56,7 @@ config TARGET_COLIBRI_IMX8X
config TARGET_DENEB
bool "Support i.MX8QXP Capricorn Deneb board"
+ select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig
index 2497b5d922..22efc998f6 100644
--- a/configs/deneb_defconfig
+++ b/configs/deneb_defconfig
@@ -26,6 +26,8 @@ CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=3
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v2 7/8] imx: imx8x: colibri: switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
` (5 preceding siblings ...)
2022-11-04 15:03 ` [PATCH v1 6/8] imx: imx8qxp: deneb " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-12 16:25 ` sbabic
2022-11-04 15:03 ` [PATCH v2 8/8] imx: imx8: apalis: " Oliver Graute
2022-11-04 16:31 ` [PATCH v2 0/8] imx8: switch missing boards " Fabio Estevam
8 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Horia Geantă,
Gaurav Jain, Ye Li, Denys Drozdov, u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
Changes for v2
- use common imx8qxp-u-boot.dtsi
- added ifdef CONFIG_SPL to imx8qm-u-boot.dtsi
arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi | 2 ++
arch/arm/mach-imx/imx8/Kconfig | 1 +
configs/colibri-imx8x_defconfig | 1 +
4 files changed, 6 insertions(+)
diff --git a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
index 322429a98a..91e2944781 100644
--- a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2019 Toradex AG
*/
+#include "imx8qxp-u-boot.dtsi"
+
&{/imx8qx-pm} {
u-boot,dm-pre-proper;
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 018b87b85b..37d12d1895 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -51,6 +51,7 @@ config TARGET_APALIS_IMX8
config TARGET_COLIBRI_IMX8X
bool "Support Colibri iMX8X module"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QXP
diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 1a207f99d0..2697775b44 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -17,6 +17,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_VERBOSE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v2 8/8] imx: imx8: apalis: switch to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
` (6 preceding siblings ...)
2022-11-04 15:03 ` [PATCH v2 7/8] imx: imx8x: colibri: " Oliver Graute
@ 2022-11-04 15:03 ` Oliver Graute
2022-11-09 17:47 ` Marcel Ziswiler
2022-11-12 16:26 ` sbabic
2022-11-04 16:31 ` [PATCH v2 0/8] imx8: switch missing boards " Fabio Estevam
8 siblings, 2 replies; 39+ messages in thread
From: Oliver Graute @ 2022-11-04 15:03 UTC (permalink / raw)
To: sbabic
Cc: oliver.graute, oliver.graute, festevam, peng.fan, uboot-imx,
Marcel Ziswiler, Gaurav Jain, Denys Drozdov, Horia Geantă,
Ye Li, u-boot
Switch to use binman to pack images
Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
---
Changes for v2
- use common imx8qm-u-boot.dtsi
- guard SPL nodes with CONFIG_SPL
arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 2 ++
arch/arm/dts/imx8qm-u-boot.dtsi | 2 ++
arch/arm/mach-imx/imx8/Kconfig | 1 +
configs/apalis-imx8_defconfig | 1 +
4 files changed, 6 insertions(+)
diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
index 956d724979..8fd0e33d2b 100644
--- a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
+++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
@@ -3,6 +3,8 @@
* Copyright 2019 Toradex AG
*/
+#include "imx8qm-u-boot.dtsi"
+
&mu {
u-boot,dm-pre-proper;
};
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index f3fc90c9bb..3507489a81 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -10,6 +10,7 @@
};
&binman {
+#ifdef CONFIG_SPL
u-boot-spl-ddr {
align = <4>;
align-size = <4>;
@@ -33,6 +34,7 @@
};
};
};
+#endif
itb {
filename = "u-boot.itb";
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index 37d12d1895..91bd888308 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -46,6 +46,7 @@ choice
config TARGET_APALIS_IMX8
bool "Support Apalis iMX8 module"
+ select BINMAN
select BOARD_LATE_INIT
select IMX8QM
diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig
index 32e105a557..0c331b62cb 100644
--- a/configs/apalis-imx8_defconfig
+++ b/configs/apalis-imx8_defconfig
@@ -17,6 +17,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_VERBOSE=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_LOG=y
--
2.17.1
^ permalink raw reply related [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
` (7 preceding siblings ...)
2022-11-04 15:03 ` [PATCH v2 8/8] imx: imx8: apalis: " Oliver Graute
@ 2022-11-04 16:31 ` Fabio Estevam
2022-11-08 16:43 ` Stefano Babic
2022-11-09 16:50 ` Marcel Ziswiler
8 siblings, 2 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-11-04 16:31 UTC (permalink / raw)
To: Oliver Graute
Cc: sbabic, oliver.graute, peng.fan, uboot-imx, Marcel Ziswiler,
Denys Drozdov, Gaurav Jain, Ye Li, Horia Geantă,
u-boot
Hi Oliver,
On Fri, Nov 4, 2022 at 12:19 PM Oliver Graute
<oliver.graute@kococonnector.com> wrote:
>
> This patchsets switches the remaining imx8 boards to binman.
>
> Oliver Graute (8):
> imx: imx8qm-rom7720: switch to binman
> imx: imx8qm: cgtqmx8: switch to binman
> imx: imx8qxp: imx8qxp_mek switch to binman
> imx: imx8qm: imx8qm_mek switch to binman
> imx: imx8qxp: giedi switch to binman
> imx: imx8qxp: deneb switch to binman
> imx: imx8x: colibri: switch to binman
> imx: imx8: apalis: switch to binman
Great work, thanks. This series looks good to me:
Reviewed-by: Fabio Estevam <festevam@denx.de>
It would be nice to get some Tested-by from the board maintainers.
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-04 16:31 ` [PATCH v2 0/8] imx8: switch missing boards " Fabio Estevam
@ 2022-11-08 16:43 ` Stefano Babic
2022-11-08 22:16 ` Fabio Estevam
2022-11-09 16:19 ` Oliver Graute
2022-11-09 16:50 ` Marcel Ziswiler
1 sibling, 2 replies; 39+ messages in thread
From: Stefano Babic @ 2022-11-08 16:43 UTC (permalink / raw)
To: Fabio Estevam, Oliver Graute
Cc: sbabic, oliver.graute, peng.fan, uboot-imx, Marcel Ziswiler,
Denys Drozdov, Gaurav Jain, Ye Li, Horia Geantă,
u-boot
Hi Fabio, Oliver,
On 04.11.22 17:31, Fabio Estevam wrote:
> Hi Oliver,
>
> On Fri, Nov 4, 2022 at 12:19 PM Oliver Graute
> <oliver.graute@kococonnector.com> wrote:
>>
>> This patchsets switches the remaining imx8 boards to binman.
>>
>> Oliver Graute (8):
>> imx: imx8qm-rom7720: switch to binman
>> imx: imx8qm: cgtqmx8: switch to binman
>> imx: imx8qxp: imx8qxp_mek switch to binman
>> imx: imx8qm: imx8qm_mek switch to binman
>> imx: imx8qxp: giedi switch to binman
>> imx: imx8qxp: deneb switch to binman
>> imx: imx8x: colibri: switch to binman
>> imx: imx8: apalis: switch to binman
>
> Great work, thanks. This series looks good to me:
>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
>
> It would be nice to get some Tested-by from the board maintainers.
I have tried to merge the series, but I get build errors, see:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
Could you take a look ?
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-08 16:43 ` Stefano Babic
@ 2022-11-08 22:16 ` Fabio Estevam
2022-11-09 15:44 ` Stefano Babic
2022-11-09 16:14 ` Oliver Graute
2022-11-09 16:19 ` Oliver Graute
1 sibling, 2 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-11-08 22:16 UTC (permalink / raw)
To: Stefano Babic
Cc: Oliver Graute, oliver.graute, peng.fan, uboot-imx,
Marcel Ziswiler, Denys Drozdov, Gaurav Jain, Ye Li,
Horia Geantă,
u-boot
Hi Oliver and Stefano,
On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic <sbabic@denx.de> wrote:
> I have tried to merge the series, but I get build errors, see:
>
> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
>
> Could you take a look ?
One problem I noticed is the missing CONFIG_TEXT_BASE conversion:
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index 3507489a813c..442e64badc39 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
index 01183f8ade63..e8df5bb8bfea 100644
--- a/arch/arm/dts/imx8qxp-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
With this fix applied, I got:
WARNING './ahab-container.img' not found, resulting binary is not-functional
make[1]: Nothing to be done for 'SPL'.
BINMAN all
binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
spl/u-boot-spl.cfgout -T imx8image -e 0x100000
./mkimage-out.spl.mkimage': Fail open first container file
ahab-container.img
make: *** [Makefile:1116: all] Error 1
but if I manually copy the firmware, then the build succeeds.
binman should not thrown an error in case of missing firmware. Oliver,
any ideas?
Also, some boards use ahab-container.img and others use
mx8qxc0-ahab-container.img.
Is it OK to use mx8qxc0-ahab-container.img for all of them?
^ permalink raw reply related [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-08 22:16 ` Fabio Estevam
@ 2022-11-09 15:44 ` Stefano Babic
2022-11-09 16:14 ` Oliver Graute
1 sibling, 0 replies; 39+ messages in thread
From: Stefano Babic @ 2022-11-09 15:44 UTC (permalink / raw)
To: Fabio Estevam, Stefano Babic
Cc: Oliver Graute, oliver.graute, peng.fan, uboot-imx,
Marcel Ziswiler, Denys Drozdov, Gaurav Jain, Ye Li,
Horia Geantă,
u-boot
Hi Fabio,
On 08.11.22 23:16, Fabio Estevam wrote:
> Hi Oliver and Stefano,
>
> On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic <sbabic@denx.de> wrote:
>
>> I have tried to merge the series, but I get build errors, see:
>>
>> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
>>
>> Could you take a look ?
>
> One problem I noticed is the missing CONFIG_TEXT_BASE conversion:
>
> diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
> index 3507489a813c..442e64badc39 100644
> --- a/arch/arm/dts/imx8qm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qm-u-boot.dtsi
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
> diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
> index 01183f8ade63..e8df5bb8bfea 100644
> --- a/arch/arm/dts/imx8qxp-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
>
> With this fix applied, I got:
>
> WARNING './ahab-container.img' not found, resulting binary is not-functional
> make[1]: Nothing to be done for 'SPL'.
> BINMAN all
> binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
> spl/u-boot-spl.cfgout -T imx8image -e 0x100000
> ./mkimage-out.spl.mkimage': Fail open first container file
> ahab-container.img
>
This is normal, but CI creates fakes. Most of built boards have warnings
that build does not run. It is nopt a problem.
> make: *** [Makefile:1116: all] Error 1
>
>
> but if I manually copy the firmware, then the build succeeds.
>
> binman should not thrown an error in case of missing firmware. Oliver,
> any ideas?
>
> Also, some boards use ahab-container.img and others use
> mx8qxc0-ahab-container.img.
>
> Is it OK to use mx8qxc0-ahab-container.img for all of them?
I try a CI run with this fixed applied and I let you know.
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-08 22:16 ` Fabio Estevam
2022-11-09 15:44 ` Stefano Babic
@ 2022-11-09 16:14 ` Oliver Graute
1 sibling, 0 replies; 39+ messages in thread
From: Oliver Graute @ 2022-11-09 16:14 UTC (permalink / raw)
To: Fabio Estevam
Cc: Stefano Babic, peng.fan, uboot-imx, Marcel Ziswiler,
Denys Drozdov, Gaurav Jain, Ye Li, Horia Geantă,
u-boot
On 08/11/22, Fabio Estevam wrote:
> Hi Oliver and Stefano,
>
> On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic <sbabic@denx.de> wrote:
>
> > I have tried to merge the series, but I get build errors, see:
> >
> > https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
> >
> > Could you take a look ?
>
> One problem I noticed is the missing CONFIG_TEXT_BASE conversion:
>
> diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
> index 3507489a813c..442e64badc39 100644
> --- a/arch/arm/dts/imx8qm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qm-u-boot.dtsi
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
> diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
> index 01183f8ade63..e8df5bb8bfea 100644
> --- a/arch/arm/dts/imx8qxp-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
>
> With this fix applied, I got:
>
> WARNING './ahab-container.img' not found, resulting binary is not-functional
> make[1]: Nothing to be done for 'SPL'.
> BINMAN all
> binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
> spl/u-boot-spl.cfgout -T imx8image -e 0x100000
> ./mkimage-out.spl.mkimage': Fail open first container file
> ahab-container.img
>
> make: *** [Makefile:1116: all] Error 1
>
>
> but if I manually copy the firmware, then the build succeeds.
>
> binman should not thrown an error in case of missing firmware. Oliver,
> any ideas?
>
> Also, some boards use ahab-container.img and others use
> mx8qxc0-ahab-container.img.
>
> Is it OK to use mx8qxc0-ahab-container.img for all of them?
I'am not sure if that is possible. The seco firmware has explicit
different images for these cpu variants.
imx-seco-3.8.5/firmware/seco
mx8dxla0-ahab-container.img
mx8dxla1-ahab-container.img
mx8qmb0-ahab-container.img
mx8qxb0-ahab-container.img
mx8qxc0-ahab-container.img
Best Regards,
Oliver
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-08 16:43 ` Stefano Babic
2022-11-08 22:16 ` Fabio Estevam
@ 2022-11-09 16:19 ` Oliver Graute
2022-11-09 17:45 ` Fabio Estevam
1 sibling, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-09 16:19 UTC (permalink / raw)
To: Stefano Babic
Cc: Fabio Estevam, peng.fan, uboot-imx, Marcel Ziswiler,
Denys Drozdov, Gaurav Jain, Ye Li, Horia Geantă,
u-boot
On 08/11/22, Stefano Babic wrote:
> Hi Fabio, Oliver,
>
> On 04.11.22 17:31, Fabio Estevam wrote:
> > Hi Oliver,
> >
> > On Fri, Nov 4, 2022 at 12:19 PM Oliver Graute
> > <oliver.graute@kococonnector.com> wrote:
> > >
> > > This patchsets switches the remaining imx8 boards to binman.
> > >
> > > Oliver Graute (8):
> > > imx: imx8qm-rom7720: switch to binman
> > > imx: imx8qm: cgtqmx8: switch to binman
> > > imx: imx8qxp: imx8qxp_mek switch to binman
> > > imx: imx8qm: imx8qm_mek switch to binman
> > > imx: imx8qxp: giedi switch to binman
> > > imx: imx8qxp: deneb switch to binman
> > > imx: imx8x: colibri: switch to binman
> > > imx: imx8: apalis: switch to binman
> >
> > Great work, thanks. This series looks good to me:
> >
> > Reviewed-by: Fabio Estevam <festevam@denx.de>
> >
> > It would be nice to get some Tested-by from the board maintainers.
>
> I have tried to merge the series, but I get build errors, see:
>
> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510
>
> Could you take a look ?
For my imx8qm boards I need to manually place these imx firmware blobs with
expected names for sucessfull image creation.
As I understood the CI creates somes fakes. But I don't know where this
is happening.
Best regards,
Oliver
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-04 16:31 ` [PATCH v2 0/8] imx8: switch missing boards " Fabio Estevam
2022-11-08 16:43 ` Stefano Babic
@ 2022-11-09 16:50 ` Marcel Ziswiler
1 sibling, 0 replies; 39+ messages in thread
From: Marcel Ziswiler @ 2022-11-09 16:50 UTC (permalink / raw)
To: festevam, oliver.graute
Cc: ye.li, uboot-imx, oliver.graute, gaurav.jain, horia.geanta,
peng.fan, sbabic, denys.drozdov, u-boot
On Fri, 2022-11-04 at 13:31 -0300, Fabio Estevam wrote:
> Hi Oliver,
>
> On Fri, Nov 4, 2022 at 12:19 PM Oliver Graute
> <oliver.graute@kococonnector.com> wrote:
> >
> > This patchsets switches the remaining imx8 boards to binman.
> >
> > Oliver Graute (8):
> > imx: imx8qm-rom7720: switch to binman
> > imx: imx8qm: cgtqmx8: switch to binman
> > imx: imx8qxp: imx8qxp_mek switch to binman
> > imx: imx8qm: imx8qm_mek switch to binman
> > imx: imx8qxp: giedi switch to binman
> > imx: imx8qxp: deneb switch to binman
> > imx: imx8x: colibri: switch to binman
> > imx: imx8: apalis: switch to binman
>
> Great work, thanks. This series looks good to me:
>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
>
> It would be nice to get some Tested-by from the board maintainers.
Sure, sorry. I'm at it. Expect our feedback promptly now.
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-09 16:19 ` Oliver Graute
@ 2022-11-09 17:45 ` Fabio Estevam
2022-11-10 16:11 ` Tom Rini
2022-11-11 12:53 ` Oliver Graute
0 siblings, 2 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-11-09 17:45 UTC (permalink / raw)
To: Stefano Babic, Fabio Estevam, Marcel Ziswiler, Ye Li
Cc: peng.fan, uboot-imx, u-boot, Simon Glass, alpernebiyasak
Hi Oliver and Stefano,
On Wed, Nov 9, 2022 at 1:19 PM Oliver Graute <oliver.graute@gmail.com> wrote:
> For my imx8qm boards I need to manually place these imx firmware blobs with
> expected names for sucessfull image creation.
>
> As I understood the CI creates somes fakes. But I don't know where this
> is happening.
CI is falling with your series applied:
https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/525787
It is easy to reproduce the failure locally. Just remove
ahab-container.img from the
U-Boot tree and try to build imx8qxp_mek_defconfig.
Prior to the binman conversion:
WARNING './ahab-container.img' not found, resulting binary is not-functional
make[1]: Nothing to be done for 'SPL'.
Only a warning is issued.
After the binman conversion:
WARNING './ahab-container.img' not found, resulting binary is not-functional
make[1]: Nothing to be done for 'SPL'.
BINMAN all
binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
spl/u-boot-spl.cfgout -T imx8image -e 0x100000
./mkimage-out.spl.mkimage': Fail open first container file
ahab-container.img
make: *** [Makefile:1116: all] Error 1
Maybe someone has any suggestions?
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 8/8] imx: imx8: apalis: switch to binman
2022-11-04 15:03 ` [PATCH v2 8/8] imx: imx8: apalis: " Oliver Graute
@ 2022-11-09 17:47 ` Marcel Ziswiler
2022-11-10 16:35 ` oliver.graute@kococonnector.com
2022-11-12 16:26 ` sbabic
1 sibling, 1 reply; 39+ messages in thread
From: Marcel Ziswiler @ 2022-11-09 17:47 UTC (permalink / raw)
To: oliver.graute, sbabic
Cc: ye.li, uboot-imx, oliver.graute, gaurav.jain, festevam, peng.fan,
horia.geanta, denys.drozdov, u-boot
Hi Oliver
Thanks for working on this.
On Fri, 2022-11-04 at 16:03 +0100, Oliver Graute wrote:
> Switch to use binman to pack images
>
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> ---
> Changes for v2
> - use common imx8qm-u-boot.dtsi
> - guard SPL nodes with CONFIG_SPL
I don't think it is that simple. Even after guarding them SPL nodes the flash.bin one still references them,
not? And yes, so far we never used SPL for them 8/8X as that honestly does not really make much sense given the
SCFW does the actual RAM initialisation. Anyway, I am not very clear on how/what exactly that all means now.
Another topic is that flash.bin is now just the SPL whereas previously u-boot-dtb.imx was the entire thing. But
again, that could have been related to us not using SPL.
> arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi | 2 ++
> arch/arm/dts/imx8qm-u-boot.dtsi | 2 ++
> arch/arm/mach-imx/imx8/Kconfig | 1 +
> configs/apalis-imx8_defconfig | 1 +
> 4 files changed, 6 insertions(+)
>
> diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
> index 956d724979..8fd0e33d2b 100644
> --- a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
> +++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi
> @@ -3,6 +3,8 @@
> * Copyright 2019 Toradex AG
> */
>
> +#include "imx8qm-u-boot.dtsi"
> +
> &mu {
> u-boot,dm-pre-proper;
> };
> diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
> index f3fc90c9bb..3507489a81 100644
> --- a/arch/arm/dts/imx8qm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qm-u-boot.dtsi
> @@ -10,6 +10,7 @@
> };
>
> &binman {
> +#ifdef CONFIG_SPL
> u-boot-spl-ddr {
> align = <4>;
> align-size = <4>;
> @@ -33,6 +34,7 @@
> };
> };
> };
> +#endif
>
> itb {
> filename = "u-boot.itb";
> diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
> index 37d12d1895..91bd888308 100644
> --- a/arch/arm/mach-imx/imx8/Kconfig
> +++ b/arch/arm/mach-imx/imx8/Kconfig
> @@ -46,6 +46,7 @@ choice
>
> config TARGET_APALIS_IMX8
> bool "Support Apalis iMX8 module"
> + select BINMAN
> select BOARD_LATE_INIT
> select IMX8QM
>
> diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig
> index 32e105a557..0c331b62cb 100644
> --- a/configs/apalis-imx8_defconfig
> +++ b/configs/apalis-imx8_defconfig
> @@ -17,6 +17,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000
> CONFIG_REMAKE_ELF=y
> CONFIG_FIT=y
> +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
Also not quite sure what exactly that is now.
> CONFIG_FIT_VERBOSE=y
> CONFIG_OF_SYSTEM_SETUP=y
> CONFIG_LOG=y
Cheers
Marcel
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-09 17:45 ` Fabio Estevam
@ 2022-11-10 16:11 ` Tom Rini
2022-11-11 12:53 ` Oliver Graute
1 sibling, 0 replies; 39+ messages in thread
From: Tom Rini @ 2022-11-10 16:11 UTC (permalink / raw)
To: Fabio Estevam
Cc: Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan, uboot-imx,
u-boot, Simon Glass, alpernebiyasak
[-- Attachment #1: Type: text/plain, Size: 1534 bytes --]
On Wed, Nov 09, 2022 at 02:45:10PM -0300, Fabio Estevam wrote:
> Hi Oliver and Stefano,
>
> On Wed, Nov 9, 2022 at 1:19 PM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> > For my imx8qm boards I need to manually place these imx firmware blobs with
> > expected names for sucessfull image creation.
> >
> > As I understood the CI creates somes fakes. But I don't know where this
> > is happening.
>
> CI is falling with your series applied:
>
> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/525787
>
> It is easy to reproduce the failure locally. Just remove
> ahab-container.img from the
> U-Boot tree and try to build imx8qxp_mek_defconfig.
>
> Prior to the binman conversion:
>
> WARNING './ahab-container.img' not found, resulting binary is not-functional
> make[1]: Nothing to be done for 'SPL'.
>
> Only a warning is issued.
>
> After the binman conversion:
>
> WARNING './ahab-container.img' not found, resulting binary is not-functional
> make[1]: Nothing to be done for 'SPL'.
> BINMAN all
> binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
> spl/u-boot-spl.cfgout -T imx8image -e 0x100000
> ./mkimage-out.spl.mkimage': Fail open first container file
> ahab-container.img
>
> make: *** [Makefile:1116: all] Error 1
>
> Maybe someone has any suggestions?
So, this is coming from board/freescale/imx8qxp_mek/imximage.cfg (and
there's another board or two doing the same / simialr thing), shouldn't
this be wholly in binman now?
--
Tom
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 659 bytes --]
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 8/8] imx: imx8: apalis: switch to binman
2022-11-09 17:47 ` Marcel Ziswiler
@ 2022-11-10 16:35 ` oliver.graute@kococonnector.com
0 siblings, 0 replies; 39+ messages in thread
From: oliver.graute@kococonnector.com @ 2022-11-10 16:35 UTC (permalink / raw)
To: Marcel Ziswiler
Cc: sbabic, ye.li, uboot-imx, gaurav.jain, festevam, peng.fan,
horia.geanta, denys.drozdov, u-boot
On 09/11/22, Marcel Ziswiler wrote:
> Hi Oliver
>
> Thanks for working on this.
>
> On Fri, 2022-11-04 at 16:03 +0100, Oliver Graute wrote:
> > Switch to use binman to pack images
> >
> > Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> > ---
> > Changes for v2
> > - use common imx8qm-u-boot.dtsi
> > - guard SPL nodes with CONFIG_SPL
>
> I don't think it is that simple. Even after guarding them SPL nodes the flash.bin one still references them,
> not? And yes, so far we never used SPL for them 8/8X as that honestly does not really make much sense given the
> SCFW does the actual RAM initialisation. Anyway, I am not very clear on how/what exactly that all means now.
On imx8qm-rom7720 we use the SCFW for RAM initalisation too but still use
SPL.
>
> Another topic is that flash.bin is now just the SPL whereas previously u-boot-dtb.imx was the entire thing. But
> again, that could have been related to us not using SPL.
yes, thats right, if I guard the SPL subnode in imx-boot node I get a 0 byte
flash.bin.
At the moment I don't know the best way here. I would be grateful for
some hints here.
> > CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
>
> Also not quite sure what exactly that is now.
its introduced by commit 3814fcba12323b9f30f39ee5455f3f9a7e955c64
Best regards,
Oliver
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-09 17:45 ` Fabio Estevam
2022-11-10 16:11 ` Tom Rini
@ 2022-11-11 12:53 ` Oliver Graute
2022-11-11 17:40 ` Fabio Estevam
1 sibling, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-11 12:53 UTC (permalink / raw)
To: Fabio Estevam
Cc: Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan, uboot-imx,
u-boot, Simon Glass, alpernebiyasak
On 09/11/22, Fabio Estevam wrote:
> Hi Oliver and Stefano,
>
> On Wed, Nov 9, 2022 at 1:19 PM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> > For my imx8qm boards I need to manually place these imx firmware blobs with
> > expected names for sucessfull image creation.
> >
> > As I understood the CI creates somes fakes. But I don't know where this
> > is happening.
>
> CI is falling with your series applied:
>
> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/525787
>
> It is easy to reproduce the failure locally. Just remove
> ahab-container.img from the
> U-Boot tree and try to build imx8qxp_mek_defconfig.
>
> Prior to the binman conversion:
>
> WARNING './ahab-container.img' not found, resulting binary is not-functional
> make[1]: Nothing to be done for 'SPL'.
>
> Only a warning is issued.
>
> After the binman conversion:
>
> WARNING './ahab-container.img' not found, resulting binary is not-functional
> make[1]: Nothing to be done for 'SPL'.
> BINMAN all
> binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n
> spl/u-boot-spl.cfgout -T imx8image -e 0x100000
> ./mkimage-out.spl.mkimage': Fail open first container file
> ahab-container.img
>
> make: *** [Makefile:1116: all] Error 1
I can reproduce it with this imx8qxp_mek board. I'am currently do not
understand how these binman-fake is working and why there are no fake
blobs for imx8qxp board. For the following two boards the fake blobs are
created:
imx8mm_evk_defconfig
apalis-imx8_defconfig
But where is the difference here?
Best regards,
Oliver
>
> Maybe someone has any suggestions?
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-11 12:53 ` Oliver Graute
@ 2022-11-11 17:40 ` Fabio Estevam
2022-11-11 17:55 ` Fabio Estevam
2022-11-18 12:35 ` Oliver Graute
0 siblings, 2 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-11-11 17:40 UTC (permalink / raw)
To: Fabio Estevam, Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan,
uboot-imx, u-boot, Simon Glass, alpernebiyasak
Hi Oliver,
On Fri, Nov 11, 2022 at 9:54 AM Oliver Graute <oliver.graute@gmail.com> wrote:
> imx8mm_evk_defconfig
> apalis-imx8_defconfig
>
> But where is the difference here?
With the change below, the imx8qm_mek_defconfig builds without errors
in the absence of the blobs:
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index 3507489a813c..442e64badc39 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
index 01183f8ade63..e8df5bb8bfea 100644
--- a/arch/arm/dts/imx8qxp-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
index 4fc828681b6c..4c220188fbb6 100644
--- a/configs/imx8qm_mek_defconfig
+++ b/configs/imx8qm_mek_defconfig
@@ -3,21 +3,12 @@ CONFIG_ARCH_IMX8=y
CONFIG_TEXT_BASE=0x80020000
CONFIG_SYS_MALLOC_LEN=0x2400000
CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x400000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-mek"
-CONFIG_SPL_TEXT_BASE=0x100000
CONFIG_TARGET_IMX8QM_MEK=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_DRIVERS_MISC=y
-CONFIG_SPL=y
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
@@ -32,22 +23,8 @@ CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run
loadbootscript; then run bootscript; else if test ${sec_boot} = yes;
then if run loadcntr; then run mmcboot; else run netboot; fi; else if
run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else
booti ${loadaddr} - ${fdt_addr}; fi"
CONFIG_LOG=y
CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_MAX_SIZE=0x1f000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x128000
-CONFIG_SPL_BSS_MAX_SIZE=0x1000
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x13e000
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000
-CONFIG_SYS_SPL_MALLOC_SIZE=0x3000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
-CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=276
@@ -66,14 +43,11 @@ CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
-CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_CLK=y
CONFIG_CLK_IMX8=y
CONFIG_CPU=y
CONFIG_MXC_GPIO=y
@@ -93,16 +67,12 @@ CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8=y
CONFIG_POWER_DOMAIN=y
CONFIG_IMX8_POWER_DOMAIN=y
CONFIG_DM_REGULATOR=y
-CONFIG_SPL_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_SPL_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_FSL_LPUART=y
-CONFIG_SPL_TINY_MEMSET=y
# CONFIG_EFI_LOADER is not set
I removed SPL support, which does not seems to be needed as the scufw
handles DDR init.
I don't have access to an imx8qm/qxp board here.
Could you try removing SPL support from your board and see if it boots
with binman support?
^ permalink raw reply related [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-11 17:40 ` Fabio Estevam
@ 2022-11-11 17:55 ` Fabio Estevam
2022-11-16 9:47 ` Marcel Ziswiler
` (2 more replies)
2022-11-18 12:35 ` Oliver Graute
1 sibling, 3 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-11-11 17:55 UTC (permalink / raw)
To: Fabio Estevam, Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan,
uboot-imx, u-boot, Simon Glass, alpernebiyasak
On Fri, Nov 11, 2022 at 2:40 PM Fabio Estevam <festevam@gmail.com> wrote:
> I removed SPL support, which does not seems to be needed as the scufw
> handles DDR init.
>
> I don't have access to an imx8qm/qxp board here.
>
> Could you try removing SPL support from your board and see if it boots
> with binman support?
Ok, let's SPL for now as this is a different topic for discussion.
With the change below against u-boot-imx master-next branch, the
imx8qm/qxp boards build fine without blobs:
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index 3507489a813c..a3e0af48109b 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -10,7 +10,7 @@
};
&binman {
-#ifdef CONFIG_SPL
+#ifdef CONFIG_SPL_BUILD
u-boot-spl-ddr {
align = <4>;
align-size = <4>;
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
index 01183f8ade63..7622c40906f1 100644
--- a/arch/arm/dts/imx8qxp-u-boot.dtsi
+++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
@@ -10,7 +10,7 @@
};
&binman {
-#ifdef CONFIG_SPL
+#ifdef CONFIG_SPL_BUILD
u-boot-spl-ddr {
align = <4>;
align-size = <4>;
@@ -50,7 +50,7 @@
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
- load = <CONFIG_SYS_TEXT_BASE>;
+ load = <CONFIG_TEXT_BASE>;
type = "standalone";
uboot-blob {
Could you please test it on your boards?
^ permalink raw reply related [flat|nested] 39+ messages in thread
* [PATCH v2 5/8] imx: imx8qxp: giedi switch to binman
2022-11-04 15:03 ` [PATCH v2 5/8] imx: imx8qxp: giedi " Oliver Graute
@ 2022-11-12 16:25 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:25 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman to pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v2 7/8] imx: imx8x: colibri: switch to binman
2022-11-04 15:03 ` [PATCH v2 7/8] imx: imx8x: colibri: " Oliver Graute
@ 2022-11-12 16:25 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:25 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman to pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v2 3/8] imx: imx8qxp: imx8qxp_mek switch to binman
2022-11-04 15:03 ` [PATCH v2 3/8] imx: imx8qxp: imx8qxp_mek " Oliver Graute
@ 2022-11-12 16:25 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:25 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v5 1/8] imx: imx8qm-rom7720: switch to binman
2022-11-04 15:03 ` [PATCH v5 1/8] imx: imx8qm-rom7720: switch " Oliver Graute
@ 2022-11-12 16:26 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:26 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman to pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v6 2/8] imx: imx8qm: cgtqmx8: switch to binman
2022-11-04 15:03 ` [PATCH v6 2/8] imx: imx8qm: cgtqmx8: " Oliver Graute
@ 2022-11-12 16:26 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:26 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman to pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> Reviewed-by: Fabio Estevam <festevam@denx.de>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v1 6/8] imx: imx8qxp: deneb switch to binman
2022-11-04 15:03 ` [PATCH v1 6/8] imx: imx8qxp: deneb " Oliver Graute
@ 2022-11-12 16:26 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:26 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v2 4/8] imx: imx8qm: imx8qm_mek switch to binman
2022-11-04 15:03 ` [PATCH v2 4/8] imx: imx8qm: imx8qm_mek " Oliver Graute
@ 2022-11-12 16:26 ` sbabic
0 siblings, 0 replies; 39+ messages in thread
From: sbabic @ 2022-11-12 16:26 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman to pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* [PATCH v2 8/8] imx: imx8: apalis: switch to binman
2022-11-04 15:03 ` [PATCH v2 8/8] imx: imx8: apalis: " Oliver Graute
2022-11-09 17:47 ` Marcel Ziswiler
@ 2022-11-12 16:26 ` sbabic
2022-11-15 10:05 ` Marcel Ziswiler
1 sibling, 1 reply; 39+ messages in thread
From: sbabic @ 2022-11-12 16:26 UTC (permalink / raw)
To: Oliver Graute, u-boot
> Switch to use binman to pack images
> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 8/8] imx: imx8: apalis: switch to binman
2022-11-12 16:26 ` sbabic
@ 2022-11-15 10:05 ` Marcel Ziswiler
2022-11-15 10:23 ` Stefano Babic
0 siblings, 1 reply; 39+ messages in thread
From: Marcel Ziswiler @ 2022-11-15 10:05 UTC (permalink / raw)
To: oliver.graute, u-boot, trini, sbabic
On Sat, 2022-11-12 at 17:26 +0100, sbabic@denx.de wrote:
> > Switch to use binman to pack images
> > Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
> Applied to u-boot-imx, master, thanks !
Quick question: Why exactly did this get applied? This really does not work at all!
> Best regards,
> Stefano Babic
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 8/8] imx: imx8: apalis: switch to binman
2022-11-15 10:05 ` Marcel Ziswiler
@ 2022-11-15 10:23 ` Stefano Babic
0 siblings, 0 replies; 39+ messages in thread
From: Stefano Babic @ 2022-11-15 10:23 UTC (permalink / raw)
To: Marcel Ziswiler, oliver.graute, u-boot, trini, sbabic
Hi Marcel,
On 15.11.22 11:05, Marcel Ziswiler wrote:
> On Sat, 2022-11-12 at 17:26 +0100, sbabic@denx.de wrote:
>>> Switch to use binman to pack images
>>> Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
>> Applied to u-boot-imx, master, thanks !
>
> Quick question: Why exactly did this get applied? This really does not work at all!
Mmhhh...I have seen the series was , and yes, I have seen you planned to
test it. It is my fault, I have not disable this single patch from the
serier when I applied.
I will revert it.
Stefano
>
>> Best regards,
>> Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-11 17:55 ` Fabio Estevam
@ 2022-11-16 9:47 ` Marcel Ziswiler
2022-11-18 13:41 ` Oliver Graute
2022-11-22 14:23 ` Oliver Graute
2 siblings, 0 replies; 39+ messages in thread
From: Marcel Ziswiler @ 2022-11-16 9:47 UTC (permalink / raw)
To: ye.li, alpernebiyasak, uboot-imx, festevam, peng.fan, sbabic,
sjg, u-boot
Cc: oliver.graute
Hi guys
On Fri, 2022-11-11 at 14:55 -0300, Fabio Estevam wrote:
> On Fri, Nov 11, 2022 at 2:40 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> > I removed SPL support, which does not seems to be needed as the scufw
> > handles DDR init.
> >
> > I don't have access to an imx8qm/qxp board here.
> >
> > Could you try removing SPL support from your board and see if it boots
> > with binman support?
>
> Ok, let's SPL for now as this is a different topic for discussion.
Sorry, for jumping in (late) again. However, I still have some serious doubts about the whole topic and was
rather surprised that this series just all of a sudden got applied. I hope it is just me being confused so
please bear with me.
What exactly is binman vs. imx8image now doing (vs. what was it doing before)? Let us e.g. look at the i.MX
8QuadMax MEK board:
arch/arm/dts/fsl-imx8qm-mek.dts [1]:
That one just includes the following:
arch/arm/dts/imx8qm-u-boot.dtsi [2]:
[snip]
> u-boot-spl-ddr {
That seems to be the SPL stuff. However, as mentioned before, it has nothing to do with the DDR initialisation
as that is done by the SCFW, not? Anyway, does using SPL even make sense then? I highly doubt it or does
anybody know any sensible reason for it?
[snip]
> mkimage {
Here above u-boot-spl-ddr.bin gets run through imx8image with the configuration taken from here (if I am not
mistaken):
board/freescale/imx8qm_mek/imximage.cfg [3]:
> /* Boot from SD, sector size 0x400 */
> BOOT_FROM SD 0x400
> /* SoC type IMX8QM */
> SOC_TYPE IMX8QM
> /* Append seco container image */
> APPEND mx8qm-ahab-container.img
> /* Create the 2nd container */
> CONTAINER
> /* Add scfw image with exec attribute */
> IMAGE SCU mx8qm-mek-scfw-tcm.bin
> /* Add ATF image with exec attribute */
> IMAGE A35 spl/u-boot-spl.bin 0x00100000
So, if I am not mistaken this does already add SECO, SCFW and ATF, right?
BTW: There is also still a board/freescale/imx8qm_mek/uboot-container.cfg [4] which likely no longer serves any
purpose, not?
Anyway, let's continue with our discussion on [2]:
[snip]
> itb {
> filename = "u-boot.itb";
So we create a fit image.
[snip]
> uboot {
Which contains U-Boot proper.
[snip]
> atf {
And ATF.
[snip]
> scfw {
And SCFW.
[snip]
> scfw_blob {
> filename = "mx8qm-val-scfw-tcm.bin";
BTW: Are we supposed to have a hard-coded file name for that val board here?
[snip]
> seco {
And SECO.
[snip]
> seco_blob {
> filename = "mx8qm-ahab-container.img";
BTW: At least nowadays that one would likely officially rather be called mx8qmb0-ahab-container.img.
[snip]
> @fdt-SEQ {
And, of course, the(m) device tree(s).
However, are we sure any of them ATF, SCFW and/or SECO in that fit image are even ever used? How exactly is
this supposed to work?
[snip]
> imx-boot {
Then it creates flash.bin but only containing the SPL?
[snip]
[1] https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/fsl-imx8qm-mek.dts
[2] https://source.denx.de/u-boot/u-boot/-/blob/master/arch/arm/dts/imx8qm-u-boot.dtsi
[3] https://source.denx.de/u-boot/u-boot/-/blob/master/board/freescale/imx8qm_mek/imximage.cfg
[4] https://source.denx.de/u-boot/u-boot/-/blob/master/board/freescale/imx8qm_mek/uboot-container.cfg
Thanks for clarifying the whole situation.
Cheers
Marcel
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-11 17:40 ` Fabio Estevam
2022-11-11 17:55 ` Fabio Estevam
@ 2022-11-18 12:35 ` Oliver Graute
1 sibling, 0 replies; 39+ messages in thread
From: Oliver Graute @ 2022-11-18 12:35 UTC (permalink / raw)
To: Fabio Estevam
Cc: Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan, uboot-imx,
u-boot, Simon Glass, alpernebiyasak
On 11/11/22, Fabio Estevam wrote:
> Hi Oliver,
>
> On Fri, Nov 11, 2022 at 9:54 AM Oliver Graute <oliver.graute@gmail.com> wrote:
>
> > imx8mm_evk_defconfig
> > apalis-imx8_defconfig
> >
> > But where is the difference here?
>
> With the change below, the imx8qm_mek_defconfig builds without errors
> in the absence of the blobs:
>
> diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
> index 3507489a813c..442e64badc39 100644
> --- a/arch/arm/dts/imx8qm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qm-u-boot.dtsi
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
> diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
> index 01183f8ade63..e8df5bb8bfea 100644
> --- a/arch/arm/dts/imx8qxp-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
> diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig
> index 4fc828681b6c..4c220188fbb6 100644
> --- a/configs/imx8qm_mek_defconfig
> +++ b/configs/imx8qm_mek_defconfig
> @@ -3,21 +3,12 @@ CONFIG_ARCH_IMX8=y
> CONFIG_TEXT_BASE=0x80020000
> CONFIG_SYS_MALLOC_LEN=0x2400000
> CONFIG_SYS_MALLOC_F_LEN=0x8000
> -CONFIG_SPL_GPIO=y
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> CONFIG_NR_DRAM_BANKS=3
> CONFIG_ENV_SIZE=0x1000
> CONFIG_ENV_OFFSET=0x400000
> CONFIG_DM_GPIO=y
> CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-mek"
> -CONFIG_SPL_TEXT_BASE=0x100000
> CONFIG_TARGET_IMX8QM_MEK=y
> -CONFIG_SPL_MMC=y
> -CONFIG_SPL_SERIAL=y
> -CONFIG_SPL_DRIVERS_MISC=y
> -CONFIG_SPL=y
> -CONFIG_SPL_LOAD_IMX_CONTAINER=y
> CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
> CONFIG_SYS_LOAD_ADDR=0x80280000
> CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> @@ -32,22 +23,8 @@ CONFIG_USE_BOOTCOMMAND=y
> CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run
> loadbootscript; then run bootscript; else if test ${sec_boot} = yes;
> then if run loadcntr; then run mmcboot; else run netboot; fi; else if
> run loadimage; then run mmcboot; else run netboot; fi; fi; fi; else
> booti ${loadaddr} - ${fdt_addr}; fi"
> CONFIG_LOG=y
> CONFIG_BOARD_EARLY_INIT_F=y
> -CONFIG_SPL_MAX_SIZE=0x1f000
> -CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> -CONFIG_SPL_BSS_START_ADDR=0x128000
> -CONFIG_SPL_BSS_MAX_SIZE=0x1000
> -CONFIG_SPL_BOARD_INIT=y
> -CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> -# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> -CONFIG_SPL_STACK=0x13e000
> -CONFIG_SYS_SPL_MALLOC=y
> -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
> -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000
> -CONFIG_SYS_SPL_MALLOC_SIZE=0x3000
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800
> -CONFIG_SPL_POWER_DOMAIN=y
> -CONFIG_SPL_WATCHDOG=y
> CONFIG_HUSH_PARSER=y
> CONFIG_SYS_CBSIZE=256
> CONFIG_SYS_PBSIZE=276
> @@ -66,14 +43,11 @@ CONFIG_CMD_MII=y
> CONFIG_CMD_PING=y
> CONFIG_CMD_CACHE=y
> CONFIG_CMD_FAT=y
> -CONFIG_SPL_OF_CONTROL=y
> CONFIG_ENV_OVERWRITE=y
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> CONFIG_SYS_MMC_ENV_DEV=1
> CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> -CONFIG_SPL_DM=y
> -CONFIG_SPL_CLK=y
> CONFIG_CLK_IMX8=y
> CONFIG_CPU=y
> CONFIG_MXC_GPIO=y
> @@ -93,16 +67,12 @@ CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
> CONFIG_FEC_MXC=y
> CONFIG_MII=y
> CONFIG_PINCTRL=y
> -CONFIG_SPL_PINCTRL=y
> CONFIG_PINCTRL_IMX8=y
> CONFIG_POWER_DOMAIN=y
> CONFIG_IMX8_POWER_DOMAIN=y
> CONFIG_DM_REGULATOR=y
> -CONFIG_SPL_DM_REGULATOR=y
> CONFIG_DM_REGULATOR_FIXED=y
> CONFIG_DM_REGULATOR_GPIO=y
> -CONFIG_SPL_DM_REGULATOR_GPIO=y
> CONFIG_DM_SERIAL=y
> CONFIG_FSL_LPUART=y
> -CONFIG_SPL_TINY_MEMSET=y
> # CONFIG_EFI_LOADER is not set
>
> I removed SPL support, which does not seems to be needed as the scufw
> handles DDR init.
I know that DDR init is done in scfw for imx8qm. Because I patched these
values gotten from a NXP Excel RPA sheet into our scfw a year ago as we
got our Micron LPDDR4. But I wasn't aware that then the SPL stuff is
superflous then. Is this really the case? Is there no other reason for
SPL? Can you confirm?
>
> I don't have access to an imx8qm/qxp board here.
>
> Could you try removing SPL support from your board and see if it boots
> with binman support?
Ok, first I removed SPL Config for imx8qm_dmsse20 board posted here [1]
Because this is my current develop setup. The imx8qm_rom7720 and cgt8mx
will follow (perhaps next week). So this Board is booting without SPL.
But I run into somme mmc issues.
U-Boot 2023.01-rc1-00056-gb805f40911-dirty (Nov 18 2022 - 13:05:16 +0100)
Model: Advantech iMX8QM DMSSE20
Board: DMS-SE20A1 8GB
Build: SCFW 549b1e18, SECO-FW c9de51c0, ATF 5782363
Boot: USB
DRAM: 8 GiB
Core: 100 devices, 19 uclasses, devicetree: separate
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In: serial@5a060000
Out: serial@5a060000
Err: serial@5a060000
Net:
Warning: ethernet@5b040000 (eth0) using random MAC address - 5a:25:75:2d:65:75
eth0: ethernet@5b040000
Warning: ethernet@5b050000 (eth1) using random MAC address - ca:41:6e:6d:75:10
, eth1: ethernet@5b050000
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
** Bad device specification mmc 2 **
Couldn't find partition mmc 2:1
Can't set block device
Card did not respond to voltage select! : -110
Card did not respond to voltage select! : -110
** Bad device specification mmc 2 **
Couldn't find partition mmc 2:1
Can't set block device
Wrong Image Format for bootm command
ERROR: can't get kernel image!
switch to partitions #0, OK
mmc0(part 0) is current device
[1] https://patchwork.ozlabs.org/project/uboot/patch/20221007131158.14094-1-oliver.graute@kococonnector.com/
Best regards,
Oliver
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-11 17:55 ` Fabio Estevam
2022-11-16 9:47 ` Marcel Ziswiler
@ 2022-11-18 13:41 ` Oliver Graute
2022-11-18 13:50 ` Fabio Estevam
2022-11-22 14:23 ` Oliver Graute
2 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-18 13:41 UTC (permalink / raw)
To: Fabio Estevam
Cc: Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan, uboot-imx,
u-boot, Simon Glass, alpernebiyasak
On 11/11/22, Fabio Estevam wrote:
> On Fri, Nov 11, 2022 at 2:40 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> > I removed SPL support, which does not seems to be needed as the scufw
> > handles DDR init.
> >
> > I don't have access to an imx8qm/qxp board here.
> >
> > Could you try removing SPL support from your board and see if it boots
> > with binman support?
>
> Ok, let's SPL for now as this is a different topic for discussion.
>
>
> With the change below against u-boot-imx master-next branch, the
> imx8qm/qxp boards build fine without blobs:
>
> diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
> index 3507489a813c..a3e0af48109b 100644
> --- a/arch/arm/dts/imx8qm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qm-u-boot.dtsi
> @@ -10,7 +10,7 @@
> };
>
> &binman {
> -#ifdef CONFIG_SPL
> +#ifdef CONFIG_SPL_BUILD
> u-boot-spl-ddr {
> align = <4>;
> align-size = <4>;
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
> diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi
> index 01183f8ade63..7622c40906f1 100644
> --- a/arch/arm/dts/imx8qxp-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi
> @@ -10,7 +10,7 @@
> };
>
> &binman {
> -#ifdef CONFIG_SPL
> +#ifdef CONFIG_SPL_BUILD
> u-boot-spl-ddr {
> align = <4>;
> align-size = <4>;
> @@ -50,7 +50,7 @@
> arch = "arm64";
> compression = "none";
> description = "U-Boot (64-bit)";
> - load = <CONFIG_SYS_TEXT_BASE>;
> + load = <CONFIG_TEXT_BASE>;
> type = "standalone";
>
> uboot-blob {
>
> Could you please test it on your boards?
Ok, I can confirm it builds without the binary blobs with this changes.
I'll change it in patches accordingly
Best regards,
Oliver
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-18 13:41 ` Oliver Graute
@ 2022-11-18 13:50 ` Fabio Estevam
0 siblings, 0 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-11-18 13:50 UTC (permalink / raw)
To: Fabio Estevam, Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan,
uboot-imx, u-boot, Simon Glass, alpernebiyasak
Hi Oliver,
On Fri, Nov 18, 2022 at 10:48 AM Oliver Graute <oliver.graute@gmail.com> wrote:
> Ok, I can confirm it builds without the binary blobs with this changes.
> I'll change it in patches accordingly
Your series has already landed in master.
Please send any incremental patches to address Marcel's feedback on top of it.
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-11 17:55 ` Fabio Estevam
2022-11-16 9:47 ` Marcel Ziswiler
2022-11-18 13:41 ` Oliver Graute
@ 2022-11-22 14:23 ` Oliver Graute
2022-12-02 1:00 ` Fabio Estevam
2 siblings, 1 reply; 39+ messages in thread
From: Oliver Graute @ 2022-11-22 14:23 UTC (permalink / raw)
To: Fabio Estevam
Cc: Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan, uboot-imx,
u-boot, Simon Glass, alpernebiyasak
On 11/11/22, Fabio Estevam wrote:
> On Fri, Nov 11, 2022 at 2:40 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> > I removed SPL support, which does not seems to be needed as the scufw
> > handles DDR init.
> >
> > I don't have access to an imx8qm/qxp board here.
> >
> > Could you try removing SPL support from your board and see if it boots
> > with binman support?
>
> Ok, let's SPL for now as this is a different topic for discussion.
>
>
> With the change below against u-boot-imx master-next branch, the
> imx8qm/qxp boards build fine without blobs:
>
> diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
> index 3507489a813c..a3e0af48109b 100644
> --- a/arch/arm/dts/imx8qm-u-boot.dtsi
> +++ b/arch/arm/dts/imx8qm-u-boot.dtsi
> @@ -10,7 +10,7 @@
> };
>
> &binman {
> -#ifdef CONFIG_SPL
> +#ifdef CONFIG_SPL_BUILD
On building the imx8qm_rom7720 board the CONFIG_SPL_BUILD define is
somehow always false. So I endup in a invalid image:
Image 'main-section' is missing external blobs and is non-functional: spl
Image 'main-section' has faked external blobs and is non-functional: spl.bin
Some images are invalid
With CONFIG_SPL instead of CONFIG_SPL_BUILD its working again. So the
Question is why is CONFIG_SPL true and CONFIG_SPL_BUILD false here?
Some hints?
Best regards,
Oliver
^ permalink raw reply [flat|nested] 39+ messages in thread
* Re: [PATCH v2 0/8] imx8: switch missing boards to binman
2022-11-22 14:23 ` Oliver Graute
@ 2022-12-02 1:00 ` Fabio Estevam
0 siblings, 0 replies; 39+ messages in thread
From: Fabio Estevam @ 2022-12-02 1:00 UTC (permalink / raw)
To: Fabio Estevam, Stefano Babic, Marcel Ziswiler, Ye Li, peng.fan,
uboot-imx, u-boot, Simon Glass, alpernebiyasak
Hi Oliver,
On Tue, Nov 22, 2022 at 11:24 AM Oliver Graute <oliver.graute@gmail.com> wrote:
> On building the imx8qm_rom7720 board the CONFIG_SPL_BUILD define is
> somehow always false. So I endup in a invalid image:
>
> Image 'main-section' is missing external blobs and is non-functional: spl
> Image 'main-section' has faked external blobs and is non-functional: spl.bin
>
> Some images are invalid
>
> With CONFIG_SPL instead of CONFIG_SPL_BUILD its working again. So the
> Question is why is CONFIG_SPL true and CONFIG_SPL_BUILD false here?
>
> Some hints?
Unfortunately, I don't have access to any imx8qxp/qm board to investigate.
Due to the several issues of the imx8qxp conversion series, I am
inclined to say we need to revert these patches for 2023.01 and then
after 2023.01 we can try again.
What do you think? if you agree, please submit the reverts.
^ permalink raw reply [flat|nested] 39+ messages in thread
end of thread, other threads:[~2022-12-02 1:00 UTC | newest]
Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-04 15:03 [PATCH v2 0/8] imx8: switch missing boards to binman Oliver Graute
2022-11-04 15:03 ` [PATCH v5 1/8] imx: imx8qm-rom7720: switch " Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v6 2/8] imx: imx8qm: cgtqmx8: " Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v2 3/8] imx: imx8qxp: imx8qxp_mek " Oliver Graute
2022-11-12 16:25 ` sbabic
2022-11-04 15:03 ` [PATCH v2 4/8] imx: imx8qm: imx8qm_mek " Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v2 5/8] imx: imx8qxp: giedi " Oliver Graute
2022-11-12 16:25 ` sbabic
2022-11-04 15:03 ` [PATCH v1 6/8] imx: imx8qxp: deneb " Oliver Graute
2022-11-12 16:26 ` sbabic
2022-11-04 15:03 ` [PATCH v2 7/8] imx: imx8x: colibri: " Oliver Graute
2022-11-12 16:25 ` sbabic
2022-11-04 15:03 ` [PATCH v2 8/8] imx: imx8: apalis: " Oliver Graute
2022-11-09 17:47 ` Marcel Ziswiler
2022-11-10 16:35 ` oliver.graute@kococonnector.com
2022-11-12 16:26 ` sbabic
2022-11-15 10:05 ` Marcel Ziswiler
2022-11-15 10:23 ` Stefano Babic
2022-11-04 16:31 ` [PATCH v2 0/8] imx8: switch missing boards " Fabio Estevam
2022-11-08 16:43 ` Stefano Babic
2022-11-08 22:16 ` Fabio Estevam
2022-11-09 15:44 ` Stefano Babic
2022-11-09 16:14 ` Oliver Graute
2022-11-09 16:19 ` Oliver Graute
2022-11-09 17:45 ` Fabio Estevam
2022-11-10 16:11 ` Tom Rini
2022-11-11 12:53 ` Oliver Graute
2022-11-11 17:40 ` Fabio Estevam
2022-11-11 17:55 ` Fabio Estevam
2022-11-16 9:47 ` Marcel Ziswiler
2022-11-18 13:41 ` Oliver Graute
2022-11-18 13:50 ` Fabio Estevam
2022-11-22 14:23 ` Oliver Graute
2022-12-02 1:00 ` Fabio Estevam
2022-11-18 12:35 ` Oliver Graute
2022-11-09 16:50 ` Marcel Ziswiler
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.