[PATCH 1/2] board: phytec: imx8mm-phycore: Remove duplicate binman node

* [PATCH 1/2] board: phytec: imx8mm-phycore: Remove duplicate binman node
@ 2022-01-07 21:16 Adam Ford
  2022-01-07 21:16 ` [PATCH 2/2] imx: imx8mm: imx8mm-kontron-n801x-s: Fix binman error Adam Ford
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Adam Ford @ 2022-01-07 21:16 UTC (permalink / raw)
  To: u-boot; +Cc: frieder.schrempf, festevam, trini, t.remmet, Adam Ford

The binman node is part of the imx8mm-u-boot.dtsi file which
is duplicated in phycore-imx8mm-u-boot.dtsi and causes a build
error.  Remove the duplicate.

Fixes: 3cbb31f0e848 ("arm64: dts: imx8mm: use common binman configuration")
Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
index f842e02c77..7c2dfb4a27 100644
--- a/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/phycore-imx8mm-u-boot.dtsi
@@ -7,10 +7,6 @@
 #include "imx8mm-u-boot.dtsi"
 
 / {
-	binman: binman {
-		multiple-images;
-	};
-
 	wdt-reboot {
 		compatible = "wdt-reboot";
 		wdt = <&wdog1>;
@@ -73,121 +69,3 @@
 &wdog1 {
 	u-boot,dm-spl;
 };
-
-&binman {
-	u-boot-spl-ddr {
-		filename = "u-boot-spl-ddr.bin";
-		pad-byte = <0xff>;
-		align-size = <4>;
-		align = <4>;
-
-		u-boot-spl {
-			align-end = <4>;
-		};
-
-		blob_1: blob-ext@1 {
-			filename = "lpddr4_pmu_train_1d_imem.bin";
-			size = <0x8000>;
-		};
-
-		blob_2: blob-ext@2 {
-			filename = "lpddr4_pmu_train_1d_dmem.bin";
-			size = <0x4000>;
-		};
-
-		blob_3: blob-ext@3 {
-			filename = "lpddr4_pmu_train_2d_imem.bin";
-			size = <0x8000>;
-		};
-
-		blob_4: blob-ext@4 {
-			filename = "lpddr4_pmu_train_2d_dmem.bin";
-			size = <0x4000>;
-		};
-	};
-
-	spl {
-		filename = "spl.bin";
-
-		mkimage {
-			args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
-
-			blob {
-				filename = "u-boot-spl-ddr.bin";
-			};
-		};
-	};
-
-	itb {
-		filename = "u-boot.itb";
-
-		fit {
-			description = "Configuration to load ATF before U-Boot";
-			#address-cells = <1>;
-			fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
-
-			images {
-				uboot {
-					description = "U-Boot (64-bit)";
-					type = "standalone";
-					arch = "arm64";
-					compression = "none";
-					load = <CONFIG_SYS_TEXT_BASE>;
-
-					uboot_blob: blob-ext {
-						filename = "u-boot-nodtb.bin";
-					};
-				};
-
-				atf {
-					description = "ARM Trusted Firmware";
-					type = "firmware";
-					arch = "arm64";
-					compression = "none";
-					load = <0x920000>;
-					entry = <0x920000>;
-
-					atf_blob: blob-ext {
-						filename = "bl31.bin";
-					};
-				};
-
-				fdt {
-					description = "NAME";
-					type = "flat_dt";
-					compression = "none";
-
-					uboot_fdt_blob: blob-ext {
-						filename = "u-boot.dtb";
-					};
-				};
-			};
-
-			configurations {
-				default = "conf";
-
-				conf {
-					description = "NAME";
-					firmware = "uboot";
-					loadables = "atf";
-					fdt = "fdt";
-				};
-			};
-		};
-	};
-
-	imx-boot {
-		filename = "flash.bin";
-		pad-byte = <0x00>;
-
-		spl: blob-ext@1 {
-			filename = "spl.bin";
-			offset = <0x0>;
-		};
-
-		uboot: blob-ext@2 {
-			filename = "u-boot.itb";
-			offset = <0x57c00>;
-		};
-	};
-};
-- 
2.32.0


^ permalink raw reply related	[flat|nested] 6+ messages in thread