* Low volume since linux 3.19 @ 2015-03-26 12:53 Jan Hinnerk Stosch 2015-03-26 13:50 ` Takashi Iwai 0 siblings, 1 reply; 7+ messages in thread From: Jan Hinnerk Stosch @ 2015-03-26 12:53 UTC (permalink / raw) To: alsa-devel Hi, I hope this is the right place to report my issue!? Since linux 3.19 I have very low volume on my Fujitsu E753 headphone even on highest volume level. As I don't have much experience with audio configuration and it worked before I did a kernel bisect and found out, that commit "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. Is there something that I have to change in my configuration? Or do you need some further information? Here is some output from dmesg: [ 5.853009] sound hdaudioC0D0: ALC269VB: SKU not ready 0x909701f0 [ 5.853857] sound hdaudioC0D0: autoconfig: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line [ 5.853860] sound hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 5.853862] sound hdaudioC0D0: hp_outs=1 (0x1a/0x0/0x0/0x0/0x0) [ 5.853864] sound hdaudioC0D0: mono: mono_out=0x0 [ 5.853866] sound hdaudioC0D0: inputs: [ 5.853869] sound hdaudioC0D0: Mic=0x18 [ 5.853871] sound hdaudioC0D0: Dock Mic=0x1b [ 5.853873] sound hdaudioC0D0: Internal Mic=0x12 Thanks in advance, jhs ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Low volume since linux 3.19 2015-03-26 12:53 Low volume since linux 3.19 Jan Hinnerk Stosch @ 2015-03-26 13:50 ` Takashi Iwai 2015-03-26 14:22 ` Jan Hinnerk Stosch 0 siblings, 1 reply; 7+ messages in thread From: Takashi Iwai @ 2015-03-26 13:50 UTC (permalink / raw) To: Jan Hinnerk Stosch; +Cc: alsa-devel, David Henningsson At Thu, 26 Mar 2015 13:53:30 +0100, Jan Hinnerk Stosch wrote: > > Hi, > > I hope this is the right place to report my issue!? > Since linux 3.19 I have very low volume on my Fujitsu E753 headphone > even on highest volume level. > As I don't have much experience with audio configuration and it worked > before I did a kernel bisect and found out, that commit > "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. Adding David to Cc. > Is there something that I have to change in my configuration? Or do > you need some further information? Please take alsa-info.sh outputs before and after the patch. Run the script with --no-upload option, and attach two output files. (Maybe better to compress when attaching.) The commit does basically only renaming some control elements. Possibly some volumes are set lower than before now. thanks, Takashi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Low volume since linux 3.19 2015-03-26 13:50 ` Takashi Iwai @ 2015-03-26 14:22 ` Jan Hinnerk Stosch 2015-03-26 14:26 ` Takashi Iwai 0 siblings, 1 reply; 7+ messages in thread From: Jan Hinnerk Stosch @ 2015-03-26 14:22 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, David Henningsson [-- Attachment #1: Type: text/plain, Size: 1100 bytes --] Thx for your quick reply. I ran the script with linux 3.18.6 and 3.19.2 and attached the output in compressed form. regards, jhs 2015-03-26 14:50 GMT+01:00 Takashi Iwai <tiwai@suse.de>: > At Thu, 26 Mar 2015 13:53:30 +0100, > Jan Hinnerk Stosch wrote: >> >> Hi, >> >> I hope this is the right place to report my issue!? >> Since linux 3.19 I have very low volume on my Fujitsu E753 headphone >> even on highest volume level. >> As I don't have much experience with audio configuration and it worked >> before I did a kernel bisect and found out, that commit >> "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. > > Adding David to Cc. > >> Is there something that I have to change in my configuration? Or do >> you need some further information? > > Please take alsa-info.sh outputs before and after the patch. Run the > script with --no-upload option, and attach two output files. (Maybe > better to compress when attaching.) > > The commit does basically only renaming some control elements. > Possibly some volumes are set lower than before now. > > > thanks, > > Takashi [-- Attachment #2: alsainfo.tar.xz --] [-- Type: application/x-xz, Size: 6664 bytes --] [-- Attachment #3: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Low volume since linux 3.19 2015-03-26 14:22 ` Jan Hinnerk Stosch @ 2015-03-26 14:26 ` Takashi Iwai 2015-03-26 15:48 ` Jan Hinnerk Stosch 0 siblings, 1 reply; 7+ messages in thread From: Takashi Iwai @ 2015-03-26 14:26 UTC (permalink / raw) To: Jan Hinnerk Stosch; +Cc: alsa-devel, David Henningsson At Thu, 26 Mar 2015 15:22:28 +0100, Jan Hinnerk Stosch wrote: > > Thx for your quick reply. > I ran the script with linux 3.18.6 and 3.19.2 and attached the output > in compressed form. I guess running the following once should recover: % amixer -c0 set k 'Speaker+LO' 0dB But still the question is who lowered it. Which PulseAudio version are you running? Takashi > > regards, > > jhs > > 2015-03-26 14:50 GMT+01:00 Takashi Iwai <tiwai@suse.de>: > > At Thu, 26 Mar 2015 13:53:30 +0100, > > Jan Hinnerk Stosch wrote: > >> > >> Hi, > >> > >> I hope this is the right place to report my issue!? > >> Since linux 3.19 I have very low volume on my Fujitsu E753 headphone > >> even on highest volume level. > >> As I don't have much experience with audio configuration and it worked > >> before I did a kernel bisect and found out, that commit > >> "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. > > > > Adding David to Cc. > > > >> Is there something that I have to change in my configuration? Or do > >> you need some further information? > > > > Please take alsa-info.sh outputs before and after the patch. Run the > > script with --no-upload option, and attach two output files. (Maybe > > better to compress when attaching.) > > > > The commit does basically only renaming some control elements. > > Possibly some volumes are set lower than before now. > > > > > > thanks, > > > > Takashi > [2 alsainfo.tar.xz <application/x-xz (base64)>] > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Low volume since linux 3.19 2015-03-26 14:26 ` Takashi Iwai @ 2015-03-26 15:48 ` Jan Hinnerk Stosch 2015-05-13 16:29 ` Jan Hinnerk Stosch 0 siblings, 1 reply; 7+ messages in thread From: Jan Hinnerk Stosch @ 2015-03-26 15:48 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, David Henningsson Yes, it works (only until next reboot). I assume the "k" after "set" was a typo. I ran % amixer amixer -c0 set 'Speaker+LO' 0dB I have pulseaudio version 6.0 regards, jhs 2015-03-26 15:26 GMT+01:00 Takashi Iwai <tiwai@suse.de>: > At Thu, 26 Mar 2015 15:22:28 +0100, > Jan Hinnerk Stosch wrote: >> >> Thx for your quick reply. >> I ran the script with linux 3.18.6 and 3.19.2 and attached the output >> in compressed form. > > I guess running the following once should recover: > % amixer -c0 set k 'Speaker+LO' 0dB > > But still the question is who lowered it. Which PulseAudio version > are you running? > > > Takashi > >> >> regards, >> >> jhs >> >> 2015-03-26 14:50 GMT+01:00 Takashi Iwai <tiwai@suse.de>: >> > At Thu, 26 Mar 2015 13:53:30 +0100, >> > Jan Hinnerk Stosch wrote: >> >> >> >> Hi, >> >> >> >> I hope this is the right place to report my issue!? >> >> Since linux 3.19 I have very low volume on my Fujitsu E753 headphone >> >> even on highest volume level. >> >> As I don't have much experience with audio configuration and it worked >> >> before I did a kernel bisect and found out, that commit >> >> "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. >> > >> > Adding David to Cc. >> > >> >> Is there something that I have to change in my configuration? Or do >> >> you need some further information? >> > >> > Please take alsa-info.sh outputs before and after the patch. Run the >> > script with --no-upload option, and attach two output files. (Maybe >> > better to compress when attaching.) >> > >> > The commit does basically only renaming some control elements. >> > Possibly some volumes are set lower than before now. >> > >> > >> > thanks, >> > >> > Takashi >> [2 alsainfo.tar.xz <application/x-xz (base64)>] >> ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Low volume since linux 3.19 2015-03-26 15:48 ` Jan Hinnerk Stosch @ 2015-05-13 16:29 ` Jan Hinnerk Stosch 2015-05-18 8:22 ` Takashi Iwai 0 siblings, 1 reply; 7+ messages in thread From: Jan Hinnerk Stosch @ 2015-05-13 16:29 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, David Henningsson Hi, a few weeks ago you wrote a patch for a lifebook T731 which fixed some wrong BIOS configuration concerning the headphone pin. A tried the patch with my Lifebook E753 and it worked. The Speaker+LO setting is gone. In alsamixer only 'Speaker' and 'Headphone' remain. 'Speaker' is muted when I plug in a headphone. So if I don't get something wrong this is the same issue!? If it is and you don't mind, would you add the following quirk-patch? diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e2afd53..8491429 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5119,6 +5119,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9099, "Sony VAIO S13", ALC275_FIXUP_SONY_DISABLE_AAMIX), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK), SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", ALC269_FIXUP_LIFEBOOK_HP_PIN), + SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E753", ALC269_FIXUP_LIFEBOOK_HP_PIN), SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", ALC269_FIXUP_LIFEBOOK_EXTMIC), SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_BXBT2807_MIC), If I got something wrong, please tell me. Regards, jhs 2015-03-26 16:48 GMT+01:00 Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com>: > Yes, it works (only until next reboot). I assume the "k" after "set" > was a typo. I ran > % amixer amixer -c0 set 'Speaker+LO' 0dB > > I have pulseaudio version 6.0 > > regards, > > jhs > > 2015-03-26 15:26 GMT+01:00 Takashi Iwai <tiwai@suse.de>: >> At Thu, 26 Mar 2015 15:22:28 +0100, >> Jan Hinnerk Stosch wrote: >>> >>> Thx for your quick reply. >>> I ran the script with linux 3.18.6 and 3.19.2 and attached the output >>> in compressed form. >> >> I guess running the following once should recover: >> % amixer -c0 set k 'Speaker+LO' 0dB >> >> But still the question is who lowered it. Which PulseAudio version >> are you running? >> >> >> Takashi >> >>> >>> regards, >>> >>> jhs >>> >>> 2015-03-26 14:50 GMT+01:00 Takashi Iwai <tiwai@suse.de>: >>> > At Thu, 26 Mar 2015 13:53:30 +0100, >>> > Jan Hinnerk Stosch wrote: >>> >> >>> >> Hi, >>> >> >>> >> I hope this is the right place to report my issue!? >>> >> Since linux 3.19 I have very low volume on my Fujitsu E753 headphone >>> >> even on highest volume level. >>> >> As I don't have much experience with audio configuration and it worked >>> >> before I did a kernel bisect and found out, that commit >>> >> "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. >>> > >>> > Adding David to Cc. >>> > >>> >> Is there something that I have to change in my configuration? Or do >>> >> you need some further information? >>> > >>> > Please take alsa-info.sh outputs before and after the patch. Run the >>> > script with --no-upload option, and attach two output files. (Maybe >>> > better to compress when attaching.) >>> > >>> > The commit does basically only renaming some control elements. >>> > Possibly some volumes are set lower than before now. >>> > >>> > >>> > thanks, >>> > >>> > Takashi >>> [2 alsainfo.tar.xz <application/x-xz (base64)>] >>> ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: Low volume since linux 3.19 2015-05-13 16:29 ` Jan Hinnerk Stosch @ 2015-05-18 8:22 ` Takashi Iwai 0 siblings, 0 replies; 7+ messages in thread From: Takashi Iwai @ 2015-05-18 8:22 UTC (permalink / raw) To: Jan Hinnerk Stosch; +Cc: alsa-devel, David Henningsson At Wed, 13 May 2015 18:29:29 +0200, Jan Hinnerk Stosch wrote: > > Hi, > > a few weeks ago you wrote a patch for a lifebook T731 which fixed some > wrong BIOS configuration concerning the headphone pin. > A tried the patch with my Lifebook E753 and it worked. The Speaker+LO > setting is gone. In alsamixer only 'Speaker' and 'Headphone' remain. > 'Speaker' is muted when I plug in a headphone. > So if I don't get something wrong this is the same issue!? > If it is and you don't mind, would you add the following quirk-patch? The very same fix was already queued in my tree (but for E752). It'll be included in the next pull request to Linus, so likely in 4.1-rc4 or rc5. thanks, Takashi > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c > index e2afd53..8491429 100644 > --- a/sound/pci/hda/patch_realtek.c > +++ b/sound/pci/hda/patch_realtek.c > @@ -5119,6 +5119,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { > SND_PCI_QUIRK(0x104d, 0x9099, "Sony VAIO S13", > ALC275_FIXUP_SONY_DISABLE_AAMIX), > SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook", ALC269_FIXUP_LIFEBOOK), > SND_PCI_QUIRK(0x10cf, 0x15dc, "Lifebook T731", > ALC269_FIXUP_LIFEBOOK_HP_PIN), > + SND_PCI_QUIRK(0x10cf, 0x1757, "Lifebook E753", > ALC269_FIXUP_LIFEBOOK_HP_PIN), > SND_PCI_QUIRK(0x10cf, 0x1845, "Lifebook U904", > ALC269_FIXUP_LIFEBOOK_EXTMIC), > SND_PCI_QUIRK(0x144d, 0xc109, "Samsung Ativ book 9 (NP900X3G)", > ALC269_FIXUP_INV_DMIC), > SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", > ALC283_FIXUP_BXBT2807_MIC), > > If I got something wrong, please tell me. > > Regards, > > jhs > > 2015-03-26 16:48 GMT+01:00 Jan Hinnerk Stosch <janhinnerk.stosch@gmail.com>: > > Yes, it works (only until next reboot). I assume the "k" after "set" > > was a typo. I ran > > % amixer amixer -c0 set 'Speaker+LO' 0dB > > > > I have pulseaudio version 6.0 > > > > regards, > > > > jhs > > > > 2015-03-26 15:26 GMT+01:00 Takashi Iwai <tiwai@suse.de>: > >> At Thu, 26 Mar 2015 15:22:28 +0100, > >> Jan Hinnerk Stosch wrote: > >>> > >>> Thx for your quick reply. > >>> I ran the script with linux 3.18.6 and 3.19.2 and attached the output > >>> in compressed form. > >> > >> I guess running the following once should recover: > >> % amixer -c0 set k 'Speaker+LO' 0dB > >> > >> But still the question is who lowered it. Which PulseAudio version > >> are you running? > >> > >> > >> Takashi > >> > >>> > >>> regards, > >>> > >>> jhs > >>> > >>> 2015-03-26 14:50 GMT+01:00 Takashi Iwai <tiwai@suse.de>: > >>> > At Thu, 26 Mar 2015 13:53:30 +0100, > >>> > Jan Hinnerk Stosch wrote: > >>> >> > >>> >> Hi, > >>> >> > >>> >> I hope this is the right place to report my issue!? > >>> >> Since linux 3.19 I have very low volume on my Fujitsu E753 headphone > >>> >> even on highest volume level. > >>> >> As I don't have much experience with audio configuration and it worked > >>> >> before I did a kernel bisect and found out, that commit > >>> >> "03ad6a8c93b6df2d65c305b5b5f9474068b45bfb" is "responsible" for this. > >>> > > >>> > Adding David to Cc. > >>> > > >>> >> Is there something that I have to change in my configuration? Or do > >>> >> you need some further information? > >>> > > >>> > Please take alsa-info.sh outputs before and after the patch. Run the > >>> > script with --no-upload option, and attach two output files. (Maybe > >>> > better to compress when attaching.) > >>> > > >>> > The commit does basically only renaming some control elements. > >>> > Possibly some volumes are set lower than before now. > >>> > > >>> > > >>> > thanks, > >>> > > >>> > Takashi > >>> [2 alsainfo.tar.xz <application/x-xz (base64)>] > >>> > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-05-18 8:22 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-03-26 12:53 Low volume since linux 3.19 Jan Hinnerk Stosch 2015-03-26 13:50 ` Takashi Iwai 2015-03-26 14:22 ` Jan Hinnerk Stosch 2015-03-26 14:26 ` Takashi Iwai 2015-03-26 15:48 ` Jan Hinnerk Stosch 2015-05-13 16:29 ` Jan Hinnerk Stosch 2015-05-18 8:22 ` Takashi Iwai
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.