* which kernel for pandaboard?
@ 2012-11-16 21:56 Cliff Brake
2012-11-17 0:05 ` Denys Dmytriyenko
2012-11-21 13:09 ` Leon Woestenberg
0 siblings, 2 replies; 14+ messages in thread
From: Cliff Brake @ 2012-11-16 21:56 UTC (permalink / raw)
To: meta-ti
[-- Attachment #1.1: Type: text/plain, Size: 842 bytes --]
I'm trying to boot a recent oe-core+meta-oe+meta-angstrom+meta-ti on a
pandaboard. With 3.4, I get the attached. With 3.1, I get the below:
Environment size: 686/131068 bytes
Panda # boot
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
4175588 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.1.0
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4175524 Bytes = 4 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
(nothing more)
What is the suggested path to get a pandaboard booting?
Thanks,
Cliff
--
=================
http://bec-systems.com
[-- Attachment #1.2: Type: text/html, Size: 1254 bytes --]
[-- Attachment #2: panda-3.4-boot-log.txt --]
[-- Type: text/plain, Size: 19010 bytes --]
U-Boot SPL 2011.12-dirty (Nov 16 2012 - 15:17:13)
Texas Instruments OMAP4430 ES2.0
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img
U-Boot 2011.12-dirty (Nov 16 2012 - 15:17:13)
CPU : OMAP4430 ES2.0
Board: OMAP4 Panda
I2C: ready
DRAM: 1 GiB
MMC: OMAP SD/MMC: 0
Using default environment
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
reading boot.scr
** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
4340608 bytes read
Booting from mmc0 ...
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.4.11
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4340544 Bytes = 4.1 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.11 (cbrake@mars) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Fri Nov 16 15:24:49 EST 2012
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] cma: CMA: reserved 8 MiB at 98800000
[ 0.000000] cma: CMA: reserved 112 MiB at 99000000
[ 0.000000] cma: CMA: reserved 32 MiB at ad800000
[ 0.000000] cma: CMA: reserved 16 MiB at ac000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] omap2_set_globals_tap
[ 0.000000] OMAP4: Map 0xad600000 to 0xfe600000 for dram barrier
[ 0.000000] omap2_set_globals_tap
[ 0.000000] OMAP4430 ES2.0
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c12ec000 s11712 r8192 d12864 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584
[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 726MB 296MB = 1022MB total
[ 0.000000] Memory: 851860k/851860k available, 196716k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0857db0 (8512 kB)
[ 0.000000] .init : 0xc0858000 - 0xc08b9dc0 ( 392 kB)
[ 0.000000] .data : 0xc08ba000 - 0xc093a7a8 ( 514 kB)
[ 0.000000] .bss : 0xc093a7cc - 0xc0ae2a04 (1697 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:538
[ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000274] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632)
[ 0.070312] pid_max: default: 32768 minimum: 301
[ 0.070617] Security Framework initialized
[ 0.070678] AppArmor: AppArmor initialized
[ 0.071044] Mount-cache hash table entries: 512
[ 0.072875] Initializing cgroup subsys cpuacct
[ 0.072937] Initializing cgroup subsys memory
[ 0.072998] Initializing cgroup subsys devices
[ 0.073028] Initializing cgroup subsys freezer
[ 0.073028] Initializing cgroup subsys net_cls
[ 0.073059] Initializing cgroup subsys blkio
[ 0.073120] Initializing cgroup subsys perf_event
[ 0.073333] CPU: Testing write buffer coherency: ok
[ 0.073455] ftrace: allocating 22900 entries in 68 pages
[ 0.143890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.144226] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.144409] Setting up static identity map for 0x8059d348 - 0x8059d3a0
[ 0.144439] L310 cache controller enabled
[ 0.144470] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[ 0.144470] omap_sar_ram_init
[ 0.144744] generating sar_ram layout...
[ 0.144958] sar ram layout created
[ 0.223022] CPU1: Booted secondary processor
[ 0.292663] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.292694] CPU1: Unknown IPI message 0x1
[ 0.292724] Brought up 2 CPUs
[ 0.292755] SMP: Total of 2 processors activated (3188.82 BogoMIPS).
[ 0.293762] devtmpfs: initialized
[ 0.299346] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299377] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299407] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299438] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299468] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299499] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299530] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299560] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299591] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299621] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299652] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299682] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299743] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299804] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299835] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299865] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299896] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299957] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299987] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.300842] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.300872] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.300994] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.301025] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.301055] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.303741] omap_hwmod: mcpdm: _wait_target_ready error: -16
[ 0.303771] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.303771] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.304077] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.304107] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.304138] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.304168] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.305389] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.305938] dummy:
[ 0.322235] NET: Registered protocol family 16
[ 0.335205] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.335632] GPMC revision 6.0
[ 0.337554] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.337615] OMAP GPIO hardware version 0.1
[ 0.337829] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.338104] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.338378] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.338623] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.338928] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.339996] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.341094] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.342864] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[ 0.342895] omap_hwmod_mux_init: Could not allocate device mux entry
[ 0.346466] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.346496] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.349212] Updated GPU clock source to be dpll_per_m7x2_ck
[ 0.350952] omap-mcbsp.1: alias pad_fck already exists
[ 0.351135] omap-mcbsp.2: alias pad_fck already exists
[ 0.351318] omap-mcbsp.3: alias pad_fck already exists
[ 0.351501] omap-mcbsp.4: alias pad_fck already exists
[ 0.352539] OMAP DMA hardware revision 0.0
[ 0.353149] emif emif.1: Device configured with addr = f0e00000 and IRQ142
[ 0.353393] emif emif.2: Device configured with addr = f1000000 and IRQ143
[ 0.359283] bio: create slab <bio-0> at 0
[ 0.360076] vwl1271: 1800 mV
[ 0.360290] vhub: 3300 mV
[ 0.360473] hsusb0: 3300 mV
[ 0.360504] hsusb0: supplied by vhub
[ 0.362274] SCSI subsystem initialized
[ 0.362670] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
[ 0.363037] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
[ 0.363311] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
[ 0.363616] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
[ 0.363922] usbcore: registered new interface driver usbfs
[ 0.364013] usbcore: registered new interface driver hub
[ 0.364135] usbcore: registered new device driver usb
[ 0.364624] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.365112] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.365692] twl 1-0048: PIH (irq 39) chaining IRQs 416..436
[ 0.366180] VUSB: 3300 mV normal standby
[ 0.369293] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.369812] V1V8: 1800 mV normal standby
[ 0.370117] V2V1: 2100 mV normal standby
[ 0.370544] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.371215] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.371917] VCXIO: 1800 mV normal standby
[ 0.371948] VCXIO: supplied by V2V1
[ 0.372863] VDAC: 1800 mV normal standby
[ 0.372863] VDAC: supplied by V2V1
[ 0.373657] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.374267] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.374969] CLK32KG:
[ 0.375274] VANA: 2100 mV normal standby
[ 0.375640] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[ 0.375915] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[ 0.376281] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.376556] Linux media interface: v0.10
[ 0.376586] Linux video capture interface: v2.00
[ 0.377044] omap-iommu omap-iommu.0: dsp registered
[ 0.377136] omap-iommu omap-iommu.1: ipu registered
[ 0.377288] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.377868] NetLabel: Initializing
[ 0.377899] NetLabel: domain hash size = 128
[ 0.377899] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.377960] NetLabel: unlabeled traffic allowed by default
[ 0.378479] Switching to clocksource 32k_counter
[ 0.398284] FS-Cache: Loaded
[ 0.398498] AppArmor: AppArmor Filesystem Enabled
[ 0.411468] NET: Registered protocol family 2
[ 0.411804] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.412536] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.414489] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.415588] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.415588] TCP: reno registered
[ 0.415618] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.415649] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.416015] NET: Registered protocol family 1
[ 0.416229] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
[ 0.480865] omap-rproc.1: alias fck already exists
[ 0.481689] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.481781] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.481872] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.481964] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.483001] audit: initializing netlink socket (disabled)
[ 0.483062] type=2000 audit(0.437:1): initialized
[ 0.577575] highmem bounce pool size: 64 pages
[ 0.584381] VFS: Disk quotas dquot_6.5.2
[ 0.584716] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.587860] fuse init (API version 7.18)
[ 0.588195] msgmni has been set to 1471
[ 0.590118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.590301] io scheduler noop registered
[ 0.590301] io scheduler deadline registered
[ 0.590362] io scheduler cfq registered (default)
[ 0.591308] OMAP DSS rev 4.0
[ 0.619873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.621276] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.621704] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.622100] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 1.806335] console [ttyO2] enabled
[ 1.810485] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 1.818817] [drm] Initialized drm 1.1.0 20060810
[ 1.832061] brd: module loaded
[ 1.839172] loop: module loaded
[ 1.842712] (stk) :sysfs entries created
[ 1.846923] (stk) : debugfs entries created
[ 1.856536] Fixed MDIO Bus: probed
[ 1.860382] tun: Universal TUN/TAP device driver, 1.6
[ 1.865844] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.872894] PPP generic driver version 2.4.2
[ 1.877777] usbcore: registered new interface driver smsc95xx
[ 1.884246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.031890] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.038238] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.047912] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.066101] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.072479] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.079772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.087524] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.093231] usb usb1: Manufacturer: Linux 3.4.11 ehci_hcd
[ 2.099060] usb usb1: SerialNumber: ehci-omap.0
[ 2.104583] hub 1-0:1.0: USB hub found
[ 2.108642] hub 1-0:1.0: 3 ports detected
[ 2.144256] Initializing USB Mass Storage driver...
[ 2.149597] usbcore: registered new interface driver usb-storage
[ 2.156066] USB Mass Storage support registered.
[ 2.161102] usbcore: registered new interface driver libusual
[ 2.167266] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.374969] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[ 2.384185] mousedev: PS/2 mouse device common for all mice
[ 2.392181] twl_rtc twl_rtc: Enabling TWL-RTC
[ 2.400207] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.407043] i2c /dev entries driver
[ 2.412475] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 2.420440] device-mapper: uevent: version 1.0.3
[ 2.425781] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.437103] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
[ 2.441101] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.560089] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
[ 2.605590] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.612670] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.620910] hub 1-1:1.0: USB hub found
[ 2.625061] hub 1-1:1.0: 5 ports detected
[ 2.677001] thermal_governor_dev_register:Adding omap_ondie_governor governor
[ 2.684570] thermal_get_slope:Getting slope is not supported for domain cpu
[ 2.691986] thermal_get_offset:Getting offset is not supported for domain cpu
[ 2.699859] thermal_governor_dev_register:Adding omap_ongpu_governor governor
[ 2.707550] thermal_get_slope:Getting slope is not supported for domain gpu
[ 2.715026] thermal_get_offset:Getting offset is not supported for domain gpu
[ 2.722839] stm_fw: vendor driver stm_ti1.0 registered
[ 2.737792] omap_pcm_dummy() init
[ 2.741729] OMAP4/5 SoC init
[ 2.744812] omap_pcm_dummy() init
[ 2.748352] omap_mcpdm_dummy() init
[ 2.752960] aess aess: ABE Firmware version 9560
[ 2.760162] omap_sr_disable: omap_sr struct for sr_iva not found
[ 2.774414] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 2.785217] mmc0: new high speed SD card at address b368
[ 2.791931] mmcblk0: mmc0:b368 E1213 976 MiB
[ 2.798431] mmcblk0: p1 p2
[ 2.799438] omap_sr_disable: omap_sr struct for sr_iva not found
[ 2.811248] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 2.819244] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 2.828399] asoc: snd-soc-dummy-dai <-> Voice mapping ok
[ 2.836395] asoc: snd-soc-dummy-dai <-> Tones mapping ok
[ 2.843658] asoc: snd-soc-dummy-dai <-> Vibra mapping ok
[ 2.849822] asoc: snd-soc-dummy-dai <-> MODEM mapping ok
[ 2.855926] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok
[ 2.862640] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 2.871795] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok
[ 2.878601] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 2.884338] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 2.890014] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 2.895782] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 2.901489] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
[ 2.908050] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
[ 2.914672] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 2.921295] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 2.928680] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 2.936370] input: Panda Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0
[ 2.950714] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
[ 2.958496] u32 classifier
[ 2.961364] Actions configured
[ 2.965362] TCP: cubic registered
[ 2.969390] NET: Registered protocol family 10
[ 2.975006] NET: Registered protocol family 17
[ 2.979888] lib80211: common routines for IEEE802.11 drivers
[ 2.986083] Registering the dns_resolver key type
[ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 2.999420] ThumbEE CPU extension supported.
[ 3.003997] Registering SWP/SWPB emulation handler
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-16 21:56 which kernel for pandaboard? Cliff Brake
@ 2012-11-17 0:05 ` Denys Dmytriyenko
[not found] ` <CAOd_LFwO7qx6HFrQOuGCJCYQ7vCMVikkZ80XX=3Hd=t8qDkOQA@mail.gmail.com>
2012-11-21 13:09 ` Leon Woestenberg
1 sibling, 1 reply; 14+ messages in thread
From: Denys Dmytriyenko @ 2012-11-17 0:05 UTC (permalink / raw)
To: Cliff Brake; +Cc: meta-ti
On Fri, Nov 16, 2012 at 04:56:53PM -0500, Cliff Brake wrote:
> I'm trying to boot a recent oe-core+meta-oe+meta-angstrom+meta-ti on a
> pandaboard. With 3.4, I get the attached. With 3.1, I get the below:
3.4 should work. With 3.1 there were some reports that it didn't boot, when
built with recent toolchain from oe-core... What problems do you have with
3.4? Does it boot?
Denys
> Environment size: 686/131068 bytes
> Panda # boot
> reading boot.scr
>
> ** Unable to read "boot.scr" from mmc 0:1 **
> reading uImage
>
> 4175588 bytes read
> Booting from mmc0 ...
> ## Booting kernel from Legacy Image at 82000000 ...
> Image Name: Linux-3.1.0
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4175524 Bytes = 4 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
>
> (nothing more)
>
> What is the suggested path to get a pandaboard booting?
>
> Thanks,
> Cliff
>
> --
> =================
> http://bec-systems.com
> U-Boot SPL 2011.12-dirty (Nov 16 2012 - 15:17:13)
> Texas Instruments OMAP4430 ES2.0
> OMAP SD/MMC: 0
> reading u-boot.img
> reading u-boot.img
>
>
> U-Boot 2011.12-dirty (Nov 16 2012 - 15:17:13)
>
> CPU : OMAP4430 ES2.0
> Board: OMAP4 Panda
> I2C: ready
> DRAM: 1 GiB
> MMC: OMAP SD/MMC: 0
> Using default environment
>
> In: serial
> Out: serial
> Err: serial
> Hit any key to stop autoboot: 0
> reading boot.scr
>
> ** Unable to read "boot.scr" from mmc 0:1 **
> reading uImage
>
> 4340608 bytes read
> Booting from mmc0 ...
> ## Booting kernel from Legacy Image at 82000000 ...
> Image Name: Linux-3.4.11
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4340544 Bytes = 4.1 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Uncompressing Linux... done, booting the kernel.
> [ 0.000000] Booting Linux on physical CPU 0
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.4.11 (cbrake@mars) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Fri Nov 16 15:24:49 EST 2012
> [ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c5387d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
> [ 0.000000] Machine: OMAP4 Panda board
> [ 0.000000] cma: CMA: reserved 8 MiB at 98800000
> [ 0.000000] cma: CMA: reserved 112 MiB at 99000000
> [ 0.000000] cma: CMA: reserved 32 MiB at ad800000
> [ 0.000000] cma: CMA: reserved 16 MiB at ac000000
> [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
> [ 0.000000] omap2_set_globals_tap
> [ 0.000000] OMAP4: Map 0xad600000 to 0xfe600000 for dram barrier
> [ 0.000000] omap2_set_globals_tap
> [ 0.000000] OMAP4430 ES2.0
> [ 0.000000] PERCPU: Embedded 8 pages/cpu @c12ec000 s11712 r8192 d12864 u32768
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584
> [ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] allocated 2097152 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Memory: 726MB 296MB = 1022MB total
> [ 0.000000] Memory: 851860k/851860k available, 196716k reserved, 270336K highmem
> [ 0.000000] Virtual kernel memory layout:
> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
> [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
> [ 0.000000] .text : 0xc0008000 - 0xc0857db0 (8512 kB)
> [ 0.000000] .init : 0xc0858000 - 0xc08b9dc0 ( 392 kB)
> [ 0.000000] .data : 0xc08ba000 - 0xc093a7a8 ( 514 kB)
> [ 0.000000] .bss : 0xc093a7cc - 0xc0ae2a04 (1697 kB)
> [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
> [ 0.000000] Preemptible hierarchical RCU implementation.
> [ 0.000000] NR_IRQS:538
> [ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found
> [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
> [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
> [ 0.000000] Console: colour dummy device 80x30
> [ 0.000274] Calibrating delay loop... 1590.23 BogoMIPS (lpj=6213632)
> [ 0.070312] pid_max: default: 32768 minimum: 301
> [ 0.070617] Security Framework initialized
> [ 0.070678] AppArmor: AppArmor initialized
> [ 0.071044] Mount-cache hash table entries: 512
> [ 0.072875] Initializing cgroup subsys cpuacct
> [ 0.072937] Initializing cgroup subsys memory
> [ 0.072998] Initializing cgroup subsys devices
> [ 0.073028] Initializing cgroup subsys freezer
> [ 0.073028] Initializing cgroup subsys net_cls
> [ 0.073059] Initializing cgroup subsys blkio
> [ 0.073120] Initializing cgroup subsys perf_event
> [ 0.073333] CPU: Testing write buffer coherency: ok
> [ 0.073455] ftrace: allocating 22900 entries in 68 pages
> [ 0.143890] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
> [ 0.144226] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
> [ 0.144409] Setting up static identity map for 0x8059d348 - 0x8059d3a0
> [ 0.144439] L310 cache controller enabled
> [ 0.144470] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
> [ 0.144470] omap_sar_ram_init
> [ 0.144744] generating sar_ram layout...
> [ 0.144958] sar ram layout created
> [ 0.223022] CPU1: Booted secondary processor
> [ 0.292663] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
> [ 0.292694] CPU1: Unknown IPI message 0x1
> [ 0.292724] Brought up 2 CPUs
> [ 0.292755] SMP: Total of 2 processors activated (3188.82 BogoMIPS).
> [ 0.293762] devtmpfs: initialized
> [ 0.299346] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299377] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299407] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299438] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299468] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299499] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299530] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.299560] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299591] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299621] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.299652] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299682] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.299743] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299804] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299835] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299865] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299896] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299957] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.299987] omap_sr_disable: omap_sr struct for sr_core not found
> [ 0.300842] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.300872] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.300994] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.301025] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.301055] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.303741] omap_hwmod: mcpdm: _wait_target_ready error: -16
> [ 0.303771] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.303771] omap_hwmod: mcpdm: cannot be enabled (3)
> [ 0.304077] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.304107] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.304138] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.304168] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.305389] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.305938] dummy:
> [ 0.322235] NET: Registered protocol family 16
> [ 0.335205] DMA: preallocated 256 KiB pool for atomic coherent allocations
> [ 0.335632] GPMC revision 6.0
> [ 0.337554] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
> [ 0.337615] OMAP GPIO hardware version 0.1
> [ 0.337829] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
> [ 0.338104] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
> [ 0.338378] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
> [ 0.338623] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
> [ 0.338928] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
> [ 0.339996] omap_mux_init: Add partition: #1: core, flags: 2
> [ 0.341094] omap_mux_init: Add partition: #2: wkup, flags: 2
> [ 0.342864] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
> [ 0.342895] omap_hwmod_mux_init: Could not allocate device mux entry
> [ 0.346466] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
> [ 0.346496] hw-breakpoint: maximum watchpoint size is 4 bytes.
> [ 0.349212] Updated GPU clock source to be dpll_per_m7x2_ck
> [ 0.350952] omap-mcbsp.1: alias pad_fck already exists
> [ 0.351135] omap-mcbsp.2: alias pad_fck already exists
> [ 0.351318] omap-mcbsp.3: alias pad_fck already exists
> [ 0.351501] omap-mcbsp.4: alias pad_fck already exists
> [ 0.352539] OMAP DMA hardware revision 0.0
> [ 0.353149] emif emif.1: Device configured with addr = f0e00000 and IRQ142
> [ 0.353393] emif emif.2: Device configured with addr = f1000000 and IRQ143
> [ 0.359283] bio: create slab <bio-0> at 0
> [ 0.360076] vwl1271: 1800 mV
> [ 0.360290] vhub: 3300 mV
> [ 0.360473] hsusb0: 3300 mV
> [ 0.360504] hsusb0: supplied by vhub
> [ 0.362274] SCSI subsystem initialized
> [ 0.362670] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
> [ 0.363037] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
> [ 0.363311] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
> [ 0.363616] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
> [ 0.363922] usbcore: registered new interface driver usbfs
> [ 0.364013] usbcore: registered new interface driver hub
> [ 0.364135] usbcore: registered new device driver usb
> [ 0.364624] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
> [ 0.365112] Skipping twl internal clock init and using bootloader value (unknown osc rate)
> [ 0.365692] twl 1-0048: PIH (irq 39) chaining IRQs 416..436
> [ 0.366180] VUSB: 3300 mV normal standby
> [ 0.369293] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
> [ 0.369812] V1V8: 1800 mV normal standby
> [ 0.370117] V2V1: 2100 mV normal standby
> [ 0.370544] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
> [ 0.371215] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
> [ 0.371917] VCXIO: 1800 mV normal standby
> [ 0.371948] VCXIO: supplied by V2V1
> [ 0.372863] VDAC: 1800 mV normal standby
> [ 0.372863] VDAC: supplied by V2V1
> [ 0.373657] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
> [ 0.374267] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
> [ 0.374969] CLK32KG:
> [ 0.375274] VANA: 2100 mV normal standby
> [ 0.375640] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
> [ 0.375915] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
> [ 0.376281] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
> [ 0.376556] Linux media interface: v0.10
> [ 0.376586] Linux video capture interface: v2.00
> [ 0.377044] omap-iommu omap-iommu.0: dsp registered
> [ 0.377136] omap-iommu omap-iommu.1: ipu registered
> [ 0.377288] Advanced Linux Sound Architecture Driver Version 1.0.25.
> [ 0.377868] NetLabel: Initializing
> [ 0.377899] NetLabel: domain hash size = 128
> [ 0.377899] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.377960] NetLabel: unlabeled traffic allowed by default
> [ 0.378479] Switching to clocksource 32k_counter
> [ 0.398284] FS-Cache: Loaded
> [ 0.398498] AppArmor: AppArmor Filesystem Enabled
> [ 0.411468] NET: Registered protocol family 2
> [ 0.411804] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.412536] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.414489] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
> [ 0.415588] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.415588] TCP: reno registered
> [ 0.415618] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.415649] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.416015] NET: Registered protocol family 1
> [ 0.416229] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
> [ 0.480865] omap-rproc.1: alias fck already exists
> [ 0.481689] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.481781] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.481872] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.481964] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 0.483001] audit: initializing netlink socket (disabled)
> [ 0.483062] type=2000 audit(0.437:1): initialized
> [ 0.577575] highmem bounce pool size: 64 pages
> [ 0.584381] VFS: Disk quotas dquot_6.5.2
> [ 0.584716] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.587860] fuse init (API version 7.18)
> [ 0.588195] msgmni has been set to 1471
> [ 0.590118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> [ 0.590301] io scheduler noop registered
> [ 0.590301] io scheduler deadline registered
> [ 0.590362] io scheduler cfq registered (default)
> [ 0.591308] OMAP DSS rev 4.0
> [ 0.619873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 0.621276] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
> [ 0.621704] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
> [ 0.622100] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
> [ 1.806335] console [ttyO2] enabled
> [ 1.810485] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
> [ 1.818817] [drm] Initialized drm 1.1.0 20060810
> [ 1.832061] brd: module loaded
> [ 1.839172] loop: module loaded
> [ 1.842712] (stk) :sysfs entries created
> [ 1.846923] (stk) : debugfs entries created
> [ 1.856536] Fixed MDIO Bus: probed
> [ 1.860382] tun: Universal TUN/TAP device driver, 1.6
> [ 1.865844] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [ 1.872894] PPP generic driver version 2.4.2
> [ 1.877777] usbcore: registered new interface driver smsc95xx
> [ 1.884246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 2.031890] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
> [ 2.038238] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
> [ 2.047912] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
> [ 2.066101] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
> [ 2.072479] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.079772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.087524] usb usb1: Product: OMAP-EHCI Host Controller
> [ 2.093231] usb usb1: Manufacturer: Linux 3.4.11 ehci_hcd
> [ 2.099060] usb usb1: SerialNumber: ehci-omap.0
> [ 2.104583] hub 1-0:1.0: USB hub found
> [ 2.108642] hub 1-0:1.0: 3 ports detected
> [ 2.144256] Initializing USB Mass Storage driver...
> [ 2.149597] usbcore: registered new interface driver usb-storage
> [ 2.156066] USB Mass Storage support registered.
> [ 2.161102] usbcore: registered new interface driver libusual
> [ 2.167266] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
> [ 2.374969] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
> [ 2.384185] mousedev: PS/2 mouse device common for all mice
> [ 2.392181] twl_rtc twl_rtc: Enabling TWL-RTC
> [ 2.400207] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
> [ 2.407043] i2c /dev entries driver
> [ 2.412475] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
> [ 2.420440] device-mapper: uevent: version 1.0.3
> [ 2.425781] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
> [ 2.437103] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
> [ 2.441101] usb 1-1: new high-speed USB device number 2 using ehci-omap
> [ 2.560089] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
> [ 2.605590] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
> [ 2.612670] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.620910] hub 1-1:1.0: USB hub found
> [ 2.625061] hub 1-1:1.0: 5 ports detected
> [ 2.677001] thermal_governor_dev_register:Adding omap_ondie_governor governor
> [ 2.684570] thermal_get_slope:Getting slope is not supported for domain cpu
> [ 2.691986] thermal_get_offset:Getting offset is not supported for domain cpu
> [ 2.699859] thermal_governor_dev_register:Adding omap_ongpu_governor governor
> [ 2.707550] thermal_get_slope:Getting slope is not supported for domain gpu
> [ 2.715026] thermal_get_offset:Getting offset is not supported for domain gpu
> [ 2.722839] stm_fw: vendor driver stm_ti1.0 registered
> [ 2.737792] omap_pcm_dummy() init
> [ 2.741729] OMAP4/5 SoC init
> [ 2.744812] omap_pcm_dummy() init
> [ 2.748352] omap_mcpdm_dummy() init
> [ 2.752960] aess aess: ABE Firmware version 9560
> [ 2.760162] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 2.774414] mmc0: host does not support reading read-only switch. assuming write-enable.
> [ 2.785217] mmc0: new high speed SD card at address b368
> [ 2.791931] mmcblk0: mmc0:b368 E1213 976 MiB
> [ 2.798431] mmcblk0: p1 p2
> [ 2.799438] omap_sr_disable: omap_sr struct for sr_iva not found
> [ 2.811248] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
> [ 2.819244] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
> [ 2.828399] asoc: snd-soc-dummy-dai <-> Voice mapping ok
> [ 2.836395] asoc: snd-soc-dummy-dai <-> Tones mapping ok
> [ 2.843658] asoc: snd-soc-dummy-dai <-> Vibra mapping ok
> [ 2.849822] asoc: snd-soc-dummy-dai <-> MODEM mapping ok
> [ 2.855926] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok
> [ 2.862640] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
> [ 2.871795] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok
> [ 2.878601] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
> [ 2.884338] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
> [ 2.890014] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
> [ 2.895782] asoc: twl6040-vib <-> mcpdm-vib mapping ok
> [ 2.901489] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
> [ 2.908050] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
> [ 2.914672] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
> [ 2.921295] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
> [ 2.928680] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
> [ 2.936370] input: Panda Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0
> [ 2.950714] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
> [ 2.958496] u32 classifier
> [ 2.961364] Actions configured
> [ 2.965362] TCP: cubic registered
> [ 2.969390] NET: Registered protocol family 10
> [ 2.975006] NET: Registered protocol family 17
> [ 2.979888] lib80211: common routines for IEEE802.11 drivers
> [ 2.986083] Registering the dns_resolver key type
> [ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
> [ 2.999420] ThumbEE CPU extension supported.
> [ 3.003997] Registering SWP/SWPB emulation handler
>
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
[not found] ` <CAOd_LFwO7qx6HFrQOuGCJCYQ7vCMVikkZ80XX=3Hd=t8qDkOQA@mail.gmail.com>
@ 2012-11-17 19:34 ` Cliff Brake
2012-11-18 12:06 ` Enrico
0 siblings, 1 reply; 14+ messages in thread
From: Cliff Brake @ 2012-11-17 19:34 UTC (permalink / raw)
To: Denys Dmytriyenko; +Cc: meta-ti
[-- Attachment #1: Type: text/plain, Size: 2648 bytes --]
copying mail list ...
On Sat, Nov 17, 2012 at 2:33 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
> On Fri, Nov 16, 2012 at 7:05 PM, Denys Dmytriyenko <denys@ti.com> wrote:
>
>> On Fri, Nov 16, 2012 at 04:56:53PM -0500, Cliff Brake wrote:
>> > I'm trying to boot a recent oe-core+meta-oe+meta-angstrom+meta-ti on a
>> > pandaboard. With 3.4, I get the attached. With 3.1, I get the below:
>>
>> 3.4 should work. With 3.1 there were some reports that it didn't boot,
>> when
>> built with recent toolchain from oe-core... What problems do you have with
>> 3.4? Does it boot?
>>
>
> I don't get to a log-in prompt:
>
> > [ 2.908050] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
> > [ 2.914672] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
> > [ 2.921295] usb 1-1.1: new high-speed USB device number 3 using
> ehci-omap
> > [ 2.928680] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
> > [ 2.936370] input: Panda Headset Jack as /devices/platform/omap-abe-
> twl6040/sound/card0/input0
> > [ 2.950714] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
> > [ 2.958496] u32 classifier
> > [ 2.961364] Actions configured
> > [ 2.965362] TCP: cubic registered
> > [ 2.969390] NET: Registered protocol family 10
> > [ 2.975006] NET: Registered protocol family 17
> > [ 2.979888] lib80211: common routines for IEEE802.11 drivers
> > [ 2.986083] Registering the dns_resolver key type
> > [ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30
> variant 9 rev 1
> > [ 2.999420] ThumbEE CPU extension supported.
> > [ 3.003997] Registering SWP/SWPB emulation handler
>
> (nothing more)
>
> I wonder if its something wrong with the MMC driver or config? At a
> glance, it looks ok.
>
> CONFIG_MMC=y
> CONFIG_MMC_BLOCK=y
> CONFIG_MMC_BLOCK_BOUNCE=y
> # CONFIG_MMC_BLOCK_DEFERRED_RESUME is not set
> CONFIG_MMC_BLOCK_MINORS=16
> # CONFIG_MMC_CLKGATE is not set
> # CONFIG_MMC_DEBUG is not set
> # CONFIG_MMC_DW is not set
> # CONFIG_MMC_EMBEDDED_SDIO is not set
> CONFIG_MMC_OMAP=y
> CONFIG_MMC_OMAP_HS=y
> # CONFIG_MMC_PARANOID_SD_INIT is not set
> CONFIG_MMC_SDHCI=m
> CONFIG_MMC_SDHCI_PLTFM=m
> # CONFIG_MMC_SDHCI_PXAV2 is not set
> # CONFIG_MMC_SDHCI_PXAV3 is not set
> # CONFIG_MMC_TEST is not set
> # CONFIG_MMC_TMIO is not set
> CONFIG_MMC_UNSAFE_RESUME=y
> CONFIG_MMC_USHC=m
> CONFIG_MMC_VUB300=m
>
> Perhaps I'll try an initramfs next and see if that boots.
>
> Thanks,
> Cliff
>
> --
> =================
> http://bec-systems.com
>
--
=================
http://bec-systems.com
[-- Attachment #2: Type: text/html, Size: 6441 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-17 19:34 ` Cliff Brake
@ 2012-11-18 12:06 ` Enrico
2012-11-19 16:42 ` Cliff Brake
2012-11-20 14:02 ` Cliff Brake
0 siblings, 2 replies; 14+ messages in thread
From: Enrico @ 2012-11-18 12:06 UTC (permalink / raw)
To: Cliff Brake; +Cc: meta-ti
On Sat, Nov 17, 2012 at 8:34 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
> copying mail list ...
>
> On Sat, Nov 17, 2012 at 2:33 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
>>
>> On Fri, Nov 16, 2012 at 7:05 PM, Denys Dmytriyenko <denys@ti.com> wrote:
>>>
>>> On Fri, Nov 16, 2012 at 04:56:53PM -0500, Cliff Brake wrote:
>>> > I'm trying to boot a recent oe-core+meta-oe+meta-angstrom+meta-ti on a
>>> > pandaboard. With 3.4, I get the attached. With 3.1, I get the below:
>>>
>>> 3.4 should work. With 3.1 there were some reports that it didn't boot,
>>> when
>>> built with recent toolchain from oe-core... What problems do you have
>>> with
>>> 3.4? Does it boot?
>>
>>
>> I don't get to a log-in prompt:
From the boot log you attached it seems that the kernel hanged far
before the login prompt.
I can send you an uImage i'm using with a similar setup to test, the
only difference i can see is that i have a pandabord ES.
Enrico
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-18 12:06 ` Enrico
@ 2012-11-19 16:42 ` Cliff Brake
2012-11-19 19:21 ` Cliff Brake
2012-11-20 14:02 ` Cliff Brake
1 sibling, 1 reply; 14+ messages in thread
From: Cliff Brake @ 2012-11-19 16:42 UTC (permalink / raw)
To: Enrico; +Cc: meta-ti
On Sun, Nov 18, 2012 at 7:06 AM, Enrico <ebutera@users.sourceforge.net> wrote:
> From the boot log you attached it seems that the kernel hanged far
> before the login prompt.
>
> I can send you an uImage i'm using with a similar setup to test, the
> only difference i can see is that i have a pandabord ES.
Yes, I'd be interested in trying your kernel.
I tried the validation image from pandaboard.org, and that seems to boot fine.
Thanks,
Cliff
--
=================
http://bec-systems.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-19 16:42 ` Cliff Brake
@ 2012-11-19 19:21 ` Cliff Brake
2012-11-19 20:29 ` Belisko Marek
0 siblings, 1 reply; 14+ messages in thread
From: Cliff Brake @ 2012-11-19 19:21 UTC (permalink / raw)
To: Enrico; +Cc: meta-ti
On Mon, Nov 19, 2012 at 11:42 AM, Cliff Brake <cliff.brake@gmail.com> wrote:
> On Sun, Nov 18, 2012 at 7:06 AM, Enrico <ebutera@users.sourceforge.net> wrote:
>
>> From the boot log you attached it seems that the kernel hanged far
>> before the login prompt.
>>
>> I can send you an uImage i'm using with a similar setup to test, the
>> only difference i can see is that i have a pandabord ES.
>
> Yes, I'd be interested in trying your kernel.
>
> I tried the validation image from pandaboard.org, and that seems to boot fine.
mainline linux kernel + a few config tweaks now boots my systemd image
just fine.
I have a non-ES rev EA1 board, so not sure if there is anything
different about it ...
Now, trying to sort the kernel params required to get the display working ...
Thanks,
Cliff
--
=================
http://bec-systems.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-19 19:21 ` Cliff Brake
@ 2012-11-19 20:29 ` Belisko Marek
2012-11-19 21:17 ` Cliff Brake
0 siblings, 1 reply; 14+ messages in thread
From: Belisko Marek @ 2012-11-19 20:29 UTC (permalink / raw)
To: Cliff Brake; +Cc: meta-ti
On Mon, Nov 19, 2012 at 8:21 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
> On Mon, Nov 19, 2012 at 11:42 AM, Cliff Brake <cliff.brake@gmail.com> wrote:
>> On Sun, Nov 18, 2012 at 7:06 AM, Enrico <ebutera@users.sourceforge.net> wrote:
>>
>>> From the boot log you attached it seems that the kernel hanged far
>>> before the login prompt.
>>>
>>> I can send you an uImage i'm using with a similar setup to test, the
>>> only difference i can see is that i have a pandabord ES.
>>
>> Yes, I'd be interested in trying your kernel.
>>
>> I tried the validation image from pandaboard.org, and that seems to boot fine.
>
> mainline linux kernel + a few config tweaks now boots my systemd image
> just fine.
Can you please share how to build mainline kernel in yocto. I try
build meta-ti pandaboard kernel
but there was an issue with fetching git kernel tree.
>
> I have a non-ES rev EA1 board, so not sure if there is anything
> different about it ...
>
> Now, trying to sort the kernel params required to get the display working ...
>
> Thanks,
> Cliff
>
> --
> =================
> http://bec-systems.com
> _______________________________________________
> meta-ti mailing list
> meta-ti@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-ti
Cheers,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-19 20:29 ` Belisko Marek
@ 2012-11-19 21:17 ` Cliff Brake
0 siblings, 0 replies; 14+ messages in thread
From: Cliff Brake @ 2012-11-19 21:17 UTC (permalink / raw)
To: Belisko Marek; +Cc: meta-ti
On Mon, Nov 19, 2012 at 3:29 PM, Belisko Marek <marek.belisko@gmail.com> wrote:
> Can you please share how to build mainline kernel in yocto. I try
> build meta-ti pandaboard kernel
> but there was an issue with fetching git kernel tree.
Currently, I'm building test kernels outside OE, so I just use the
toolchain from OE (can be set up with something like
https://github.com/cbrake/oe-build-core/blob/master/envsetup.sh), and
then my kernel defconfig changes can be found here:
https://github.com/cbrake/linux/tree/2012-11-19_pandaboard
Thanks,
Cliff
--
=================
http://bec-systems.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-18 12:06 ` Enrico
2012-11-19 16:42 ` Cliff Brake
@ 2012-11-20 14:02 ` Cliff Brake
2012-11-20 16:52 ` Nicolas Dechesne
2012-11-21 12:58 ` Enrico
1 sibling, 2 replies; 14+ messages in thread
From: Cliff Brake @ 2012-11-20 14:02 UTC (permalink / raw)
To: Enrico; +Cc: meta-ti
On Sun, Nov 18, 2012 at 7:06 AM, Enrico <ebutera@users.sourceforge.net> wrote:
> On Sat, Nov 17, 2012 at 8:34 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
>> copying mail list ...
>>
>> On Sat, Nov 17, 2012 at 2:33 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
>>>
>>> On Fri, Nov 16, 2012 at 7:05 PM, Denys Dmytriyenko <denys@ti.com> wrote:
>>>>
>>>> On Fri, Nov 16, 2012 at 04:56:53PM -0500, Cliff Brake wrote:
>>>> > I'm trying to boot a recent oe-core+meta-oe+meta-angstrom+meta-ti on a
>>>> > pandaboard. With 3.4, I get the attached. With 3.1, I get the below:
>>>>
>>>> 3.4 should work. With 3.1 there were some reports that it didn't boot,
>>>> when
>>>> built with recent toolchain from oe-core... What problems do you have
>>>> with
>>>> 3.4? Does it boot?
>>>
>>>
>>> I don't get to a log-in prompt:
>
> From the boot log you attached it seems that the kernel hanged far
> before the login prompt.
>
> I can send you an uImage i'm using with a similar setup to test, the
> only difference i can see is that i have a pandabord ES.
Enrico sent me a uImage which I tried and it does the same thing:
....
[ 0.000000] OMAP4430 ES2.0
....
[ 2.950775] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
[ 2.958465] u32 classifier
[ 2.961364] Actions configured
[ 2.965332] TCP: cubic registered
[ 2.969390] NET: Registered protocol family 10
[ 2.974975] NET: Registered protocol family 17
[ 2.979858] lib80211: common routines for IEEE802.11 drivers
[ 2.986053] Registering the dns_resolver key type
[ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30
variant 9 rev 1
[ 2.999572] ThumbEE CPU extension supported.
[ 3.004211] Registering SWP/SWPB emulation handler
(stops here)
As mentioned before, mainline kernels boot fine on this board, so it
appears the meta-ti kernel has problems with at least some non-ES
Panda boards.
Enrico, can you send me a complete boot log from your system? Perhaps
if I can see which drivers are being initialized after the above
message, then we can more easily narrow it down.
Also, do you have the display working on your system? If so, did you
have to add any special kernel command line args to select the display
format, etc?
Thanks,
Cliff
--
=================
http://bec-systems.com
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-20 14:02 ` Cliff Brake
@ 2012-11-20 16:52 ` Nicolas Dechesne
2012-11-20 17:04 ` Denys Dmytriyenko
2012-11-21 12:58 ` Enrico
1 sibling, 1 reply; 14+ messages in thread
From: Nicolas Dechesne @ 2012-11-20 16:52 UTC (permalink / raw)
To: Cliff Brake; +Cc: meta-ti
[-- Attachment #1: Type: text/plain, Size: 1624 bytes --]
hi,
On Tue, Nov 20, 2012 at 3:02 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
> [ 0.000000] OMAP4430 ES2.0
> ....
> [ 2.950775] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
> [ 2.958465] u32 classifier
> [ 2.961364] Actions configured
> [ 2.965332] TCP: cubic registered
> [ 2.969390] NET: Registered protocol family 10
> [ 2.974975] NET: Registered protocol family 17
> [ 2.979858] lib80211: common routines for IEEE802.11 drivers
> [ 2.986053] Registering the dns_resolver key type
> [ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30
> variant 9 rev 1
> [ 2.999572] ThumbEE CPU extension supported.
> [ 3.004211] Registering SWP/SWPB emulation handler
>
> (stops here)
>
> As mentioned before, mainline kernels boot fine on this board, so it
> appears the meta-ti kernel has problems with at least some non-ES
> Panda boards.
>
> Enrico, can you send me a complete boot log from your system? Perhaps
> if I can see which drivers are being initialized after the above
> message, then we can more easily narrow it down.
>
> Also, do you have the display working on your system? If so, did you
> have to add any special kernel command line args to select the display
> format, etc?
>
sorry to jump in late... and I just noticed that you are using ES2.0
revision of 4430 (I didn't notice that so far).
i can confirm that we have problems on old ES for 4430, in fact that kernel
seems to be working on ES2.2+.
we don't have the root cause for that, so anything that you can find would
certainly be helpful.
[-- Attachment #2: Type: text/html, Size: 2106 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-20 16:52 ` Nicolas Dechesne
@ 2012-11-20 17:04 ` Denys Dmytriyenko
0 siblings, 0 replies; 14+ messages in thread
From: Denys Dmytriyenko @ 2012-11-20 17:04 UTC (permalink / raw)
To: Nicolas Dechesne; +Cc: meta-ti
On Tue, Nov 20, 2012 at 05:52:32PM +0100, Nicolas Dechesne wrote:
> hi,
>
> On Tue, Nov 20, 2012 at 3:02 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
>
> > [ 0.000000] OMAP4430 ES2.0
> > ....
> > [ 2.950775] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
> > [ 2.958465] u32 classifier
> > [ 2.961364] Actions configured
> > [ 2.965332] TCP: cubic registered
> > [ 2.969390] NET: Registered protocol family 10
> > [ 2.974975] NET: Registered protocol family 17
> > [ 2.979858] lib80211: common routines for IEEE802.11 drivers
> > [ 2.986053] Registering the dns_resolver key type
> > [ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30
> > variant 9 rev 1
> > [ 2.999572] ThumbEE CPU extension supported.
> > [ 3.004211] Registering SWP/SWPB emulation handler
> >
> > (stops here)
> >
> > As mentioned before, mainline kernels boot fine on this board, so it
> > appears the meta-ti kernel has problems with at least some non-ES
> > Panda boards.
> >
> > Enrico, can you send me a complete boot log from your system? Perhaps
> > if I can see which drivers are being initialized after the above
> > message, then we can more easily narrow it down.
> >
> > Also, do you have the display working on your system? If so, did you
> > have to add any special kernel command line args to select the display
> > format, etc?
> >
>
> sorry to jump in late... and I just noticed that you are using ES2.0
> revision of 4430 (I didn't notice that so far).
>
> i can confirm that we have problems on old ES for 4430, in fact that kernel
> seems to be working on ES2.2+.
>
> we don't have the root cause for that, so anything that you can find would
> certainly be helpful.
I believe Cliff previously mentioned he had EA1 board, which was the first
batch of Early Adopter board, i.e. pre-production boards, that were given to
select people. Could that be the problem? And as Nicolas mentions, there are
some known issues with ES2.0 silicon. I'm wondering if there's any way to
replace it...
--
Denys
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-20 14:02 ` Cliff Brake
2012-11-20 16:52 ` Nicolas Dechesne
@ 2012-11-21 12:58 ` Enrico
1 sibling, 0 replies; 14+ messages in thread
From: Enrico @ 2012-11-21 12:58 UTC (permalink / raw)
To: Cliff Brake; +Cc: meta-ti
[-- Attachment #1: Type: text/plain, Size: 1524 bytes --]
On Tue, Nov 20, 2012 at 3:02 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
> Enrico sent me a uImage which I tried and it does the same thing:
>
> ....
> [ 0.000000] OMAP4430 ES2.0
> ....
> [ 2.950775] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
> [ 2.958465] u32 classifier
> [ 2.961364] Actions configured
> [ 2.965332] TCP: cubic registered
> [ 2.969390] NET: Registered protocol family 10
> [ 2.974975] NET: Registered protocol family 17
> [ 2.979858] lib80211: common routines for IEEE802.11 drivers
> [ 2.986053] Registering the dns_resolver key type
> [ 2.991271] VFP support v0.3: implementor 41 architecture 3 part 30
> variant 9 rev 1
> [ 2.999572] ThumbEE CPU extension supported.
> [ 3.004211] Registering SWP/SWPB emulation handler
>
> (stops here)
>
> As mentioned before, mainline kernels boot fine on this board, so it
> appears the meta-ti kernel has problems with at least some non-ES
> Panda boards.
>
> Enrico, can you send me a complete boot log from your system? Perhaps
> if I can see which drivers are being initialized after the above
> message, then we can more easily narrow it down.
>
> Also, do you have the display working on your system? If so, did you
> have to add any special kernel command line args to select the display
> format, etc?
Attached a boot log with hdmi monitor connected, as you can see i use
no kernel args for display but i get a working 1080p console (i didn't
test X).
Enrico
[-- Attachment #2: pandaboot.txt --]
[-- Type: text/plain, Size: 28166 bytes --]
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.11 (enrico@enrico-kubuntu) (gcc version 4.7.2 (GCC) ) #2 SMP PREEMPT Sun Oct 14 01:42:30 CEST 2012
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board
[ 0.000000] cma: CMA: reserved 8 MiB at 98800000
[ 0.000000] cma: CMA: reserved 112 MiB at 99000000
[ 0.000000] cma: CMA: reserved 32 MiB at ad800000
[ 0.000000] cma: CMA: reserved 16 MiB at ac000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] omap2_set_globals_tap
[ 0.000000] OMAP4: Map 0xad600000 to 0xfe600000 for dram barrier
[ 0.000000] omap2_set_globals_tap
[ 0.000000] OMAP4460 ES1.1
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1328000 s11712 r8192 d12864 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584
[ 0.000000] Kernel command line: console=ttyO2,115200n8 vram=16M root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 726MB 296MB = 1022MB total
[ 0.000000] Memory: 851616k/851616k available, 196960k reserved, 270336K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc088de20 (8728 kB)
[ 0.000000] .init : 0xc088e000 - 0xc08f0dc0 ( 396 kB)
[ 0.000000] .data : 0xc08f2000 - 0xc0975d68 ( 528 kB)
[ 0.000000] .bss : 0xc0975d8c - 0xc0b1e704 (1699 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:538
[ 0.000000] omap_sr_disable: omap_sr struct for sr_wakeup not found
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000183] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
[ 0.070373] pid_max: default: 32768 minimum: 301
[ 0.070648] Security Framework initialized
[ 0.070678] AppArmor: AppArmor initialized
[ 0.070983] Mount-cache hash table entries: 512
[ 0.072479] Initializing cgroup subsys cpuacct
[ 0.072509] Initializing cgroup subsys memory
[ 0.072570] Initializing cgroup subsys devices
[ 0.072570] Initializing cgroup subsys freezer
[ 0.072601] Initializing cgroup subsys net_cls
[ 0.072631] Initializing cgroup subsys blkio
[ 0.072662] Initializing cgroup subsys perf_event
[ 0.072814] CPU: Testing write buffer coherency: ok
[ 0.072906] ftrace: allocating 23312 entries in 69 pages
[ 0.142211] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.142486] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.142608] Setting up static identity map for 0x805c11c8 - 0x805c1220
[ 0.142639] L310 cache controller enabled
[ 0.142639] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
[ 0.142669] omap_sar_ram_init
[ 0.142944] generating sar_ram layout...
[ 0.143096] sar ram layout created
[ 0.220977] CPU1: Booted secondary processor
[ 0.290924] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.290985] CPU1: Unknown IPI message 0x1
[ 0.291015] Brought up 2 CPUs
[ 0.291015] SMP: Total of 2 processors activated (2792.83 BogoMIPS).
[ 0.291992] devtmpfs: initialized
[ 0.297698] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297760] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297790] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297821] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297851] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297882] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297912] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.297943] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.297973] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298004] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.298034] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298095] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.298156] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298187] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298217] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298278] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298309] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298370] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.298400] omap_sr_disable: omap_sr struct for sr_core not found
[ 0.299285] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299316] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299468] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299499] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.299560] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302276] omap_hwmod: mcpdm: _wait_target_ready error: -16
[ 0.302276] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302307] omap_hwmod: mcpdm: cannot be enabled (3)
[ 0.302612] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302642] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302673] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.302734] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.303955] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.304504] dummy:
[ 0.313415] NET: Registered protocol family 16
[ 0.316986] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.317291] GPMC revision 6.0
[ 0.319183] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.319274] OMAP GPIO hardware version 0.1
[ 0.319458] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.319732] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.320007] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.320251] gpiochip_add: registered GPIOs 128 to 159 on device: gpio
[ 0.320526] gpiochip_add: registered GPIOs 160 to 191 on device: gpio
[ 0.321594] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.322692] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.324493] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
[ 0.324523] omap_hwmod_mux_init: Could not allocate device mux entry
[ 0.328277] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.328308] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.331176] Updated GPU clock source to be dpll_per_m7x2_ck
[ 0.333038] omap-mcbsp.1: alias pad_fck already exists
[ 0.333251] omap-mcbsp.2: alias pad_fck already exists
[ 0.333465] omap-mcbsp.3: alias pad_fck already exists
[ 0.333679] omap-mcbsp.4: alias pad_fck already exists
[ 0.333862] omap4plus_scm.0: alias fck already exists
[ 0.334716] OMAP DMA hardware revision 0.0
[ 0.335235] emif emif.1: Device configured with addr = f0e00000 and IRQ142
[ 0.335510] emif emif.2: Device configured with addr = f1000000 and IRQ143
[ 0.343566] bio: create slab <bio-0> at 0
[ 0.344360] vwl1271: 1800 mV
[ 0.344543] vhub: 3300 mV
[ 0.344757] hsusb0: 3300 mV
[ 0.344757] hsusb0: supplied by vhub
[ 0.346710] SCSI subsystem initialized
[ 0.347076] omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
[ 0.347412] omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
[ 0.347717] omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
[ 0.348022] omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
[ 0.348358] usbcore: registered new interface driver usbfs
[ 0.348449] usbcore: registered new interface driver hub
[ 0.348602] usbcore: registered new device driver usb
[ 0.349090] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
[ 0.349609] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.350189] twl 1-0048: PIH (irq 39) chaining IRQs 416..436
[ 0.350677] VUSB: 3300 mV normal standby
[ 0.353851] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.354675] V1V8: 1800 mV normal standby
[ 0.355041] V2V1: 2100 mV normal standby
[ 0.355682] VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.356689] VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.357452] VCXIO: 1800 mV normal standby
[ 0.357482] VCXIO: supplied by V2V1
[ 0.358459] VDAC: 1800 mV normal standby
[ 0.358489] VDAC: supplied by V2V1
[ 0.359344] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.359985] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.360778] CLK32KG:
[ 0.361053] VANA: 2100 mV normal standby
[ 0.361450] omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
[ 0.361724] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
[ 0.362091] omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
[ 0.362365] Linux media interface: v0.10
[ 0.362426] Linux video capture interface: v2.00
[ 0.362915] omap-iommu omap-iommu.0: dsp registered
[ 0.362976] omap-iommu omap-iommu.1: ipu registered
[ 0.363159] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.363739] NetLabel: Initializing
[ 0.363739] NetLabel: domain hash size = 128
[ 0.363769] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.363830] NetLabel: unlabeled traffic allowed by default
[ 0.364379] Switching to clocksource 32k_counter
[ 0.384429] FS-Cache: Loaded
[ 0.384643] AppArmor: AppArmor Filesystem Enabled
[ 0.398590] NET: Registered protocol family 2
[ 0.398895] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.399566] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.401733] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.403350] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.403350] TCP: reno registered
[ 0.403381] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.403411] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.403839] NET: Registered protocol family 1
[ 0.403991] usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
[ 0.755706] omap-rproc.1: alias fck already exists
[ 0.756530] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.756652] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.756744] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.756835] omap_sr_disable: omap_sr struct for sr_iva not found
[ 0.757934] audit: initializing netlink socket (disabled)
[ 0.757995] type=2000 audit(0.718:1): initialized
[ 0.866363] highmem bounce pool size: 64 pages
[ 0.873992] VFS: Disk quotas dquot_6.5.2
[ 0.874359] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.877777] fuse init (API version 7.18)
[ 0.878204] msgmni has been set to 1471
[ 0.880126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.880279] io scheduler noop registered
[ 0.880310] io scheduler deadline registered
[ 0.880340] io scheduler cfq registered (default)
[ 0.881164] OMAP DSS rev 4.0
[ 0.910400] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.911773] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 0.912200] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 0.912628] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.098022] console [ttyO2] enabled
[ 2.102172] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.110534] [drm] Initialized drm 1.1.0 20060810
[ 2.124542] brd: module loaded
[ 2.132110] loop: module loaded
[ 2.135559] (stk) :sysfs entries created
[ 2.139801] (stk) : debugfs entries created
[ 2.149658] Fixed MDIO Bus: probed
[ 2.153533] tun: Universal TUN/TAP device driver, 1.6
[ 2.158905] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.165954] PPP generic driver version 2.4.2
[ 2.170837] usbcore: registered new interface driver smsc95xx
[ 2.177276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.325042] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.331359] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.340179] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.356658] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.362976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.370269] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.377990] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.383666] usb usb1: Manufacturer: Linux 3.4.11 ehci_hcd
[ 2.389465] usb usb1: SerialNumber: ehci-omap.0
[ 2.394989] hub 1-0:1.0: USB hub found
[ 2.399047] hub 1-0:1.0: 3 ports detected
[ 2.434814] Initializing USB Mass Storage driver...
[ 2.440124] usbcore: registered new interface driver usb-storage
[ 2.446563] USB Mass Storage support registered.
[ 2.451629] usbcore: registered new interface driver libusual
[ 2.457763] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.666046] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
[ 2.675231] mousedev: PS/2 mouse device common for all mice
[ 2.682312] twl_rtc twl_rtc: Power up reset detected.
[ 2.688751] twl_rtc twl_rtc: Enabling TWL-RTC
[ 2.696777] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 2.703552] i2c /dev entries driver
[ 2.709320] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 2.717224] device-mapper: uevent: version 1.0.3
[ 2.722503] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.731597] usb 1-1: new high-speed USB device number 2 using ehci-omap
[ 2.741394] omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
[ 2.858612] omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
[ 2.888336] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 2.895416] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.903778] hub 1-1:1.0: USB hub found
[ 2.907928] hub 1-1:1.0: 5 ports detected
[ 2.975402] thermal_governor_dev_register:Adding omap_ongpu_governor governor
[ 2.983062] thermal_get_slope:Getting slope is not supported for domain gpu
[ 2.990539] thermal_get_offset:Getting offset is not supported for domain gpu
[ 2.998504] stm_fw: vendor driver stm_ti1.0 registered
[ 3.006469] omap_pcm_dummy() init
[ 3.010375] OMAP4/5 SoC init
[ 3.013519] omap_pcm_dummy() init
[ 3.017120] omap_mcpdm_dummy() init
[ 3.025360] aess aess: ABE Firmware version 9560
[ 3.032775] omap_sr_disable: omap_sr struct for sr_iva not found
[ 3.068511] omap_sr_disable: omap_sr struct for sr_iva not found
[ 3.079254] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[ 3.087188] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[ 3.096557] asoc: snd-soc-dummy-dai <-> Voice mapping ok
[ 3.104217] asoc: snd-soc-dummy-dai <-> Tones mapping ok
[ 3.111602] asoc: snd-soc-dummy-dai <-> Vibra mapping ok
[ 3.117828] asoc: snd-soc-dummy-dai <-> MODEM mapping ok
[ 3.124145] asoc: snd-soc-dummy-dai <-> MultiMedia1 LP mapping ok
[ 3.131134] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 3.140686] asoc: twl6040-legacy <-> mcpdm-legacy mapping ok
[ 3.147613] asoc: twl6040-dl1 <-> mcpdm-dl1 mapping ok
[ 3.153472] asoc: twl6040-ul <-> mcpdm-ul1 mapping ok
[ 3.159362] asoc: twl6040-dl2 <-> mcpdm-dl2 mapping ok
[ 3.164855] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 3.173797] asoc: twl6040-vib <-> mcpdm-vib mapping ok
[ 3.179595] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
[ 3.186004] mmc0: new high speed SDHC card at address e624
[ 3.192291] mmcblk0: mmc0:e624 SD08G 7.40 GiB
[ 3.192504] asoc: snd-soc-dummy-dai <-> omap-mcbsp.1 mapping ok
[ 3.192871] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 3.193176] asoc: snd-soc-dummy-dai <-> omap-mcbsp.2 mapping ok
[ 3.194427] input: PandaES Headset Jack as /devices/platform/omap-abe-twl6040/sound/card0/input0
[ 3.216308] usb 1-1.1: new high-speed USB device number 3 using ehci-omap
[ 3.233581] asoc: omap-hdmi-hifi <-> omap-hdmi-audio-dai mapping ok
[ 3.240447] mmcblk0: p1 p2
[ 3.241333] u32 classifier
[ 3.241363] Actions configured
[ 3.241729] TCP: cubic registered
[ 3.242279] NET: Registered protocol family 10
[ 3.243072] NET: Registered protocol family 17
[ 3.243255] lib80211: common routines for IEEE802.11 drivers
[ 3.243438] Registering the dns_resolver key type
[ 3.273681] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 3.281951] ThumbEE CPU extension supported.
[ 3.286529] Registering SWP/SWPB emulation handler
[ 3.296691] omap_sr_disable: omap_sr struct for sr_mpu not found
[ 3.303405] omap_sr_disable: omap_sr struct for sr_core not found
[ 3.310485] Power Management for TI OMAP4XX/OMAP5XXX devices.
[ 3.316741] hwmod gpmc not found
[ 3.320281] sr_init: No PMIC hook to init smartreflex
[ 3.325805] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 3.334075] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 3.342559] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
[ 3.350799] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 3.358276] SmartReflex class 1.5 driver: initialized (86400000ms)
[ 3.364868] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.377227] clock: disabling unused clocks to save power
[ 3.383758] registered taskstats version 1
[ 3.388305] smsc95xx v1.0.4
[ 3.391296] do_calibrate: mpu: Calibration complete: Voltage Nominal=1380000Calib=1210000 margin=0
[ 3.401184] do_calibrate: iva: Calibration complete: Voltage Nominal=1140000Calib=974860 margin=0
[ 3.410858] do_calibrate: core: Calibration complete: Voltage Nominal=1127000Calib=1038160 margin=13000
[ 3.422546] VANA: incomplete constraints, leaving on
[ 3.428924] VDAC: incomplete constraints, leaving on
[ 3.434844] VUSB: incomplete constraints, leaving on
[ 3.440917] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.454833] dmm dmm: initialized all PAT entries
[ 3.501831] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 2e:60:29:85:46:01
[ 3.518524] mmc1: card claims to support voltages below the defined range. These will be ignored.
[ 3.525360] [drm] Enabling DMM ywrap scrolling
[ 3.542358] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[ 3.543334] mmc1: new SDIO card at address 0001
[ 3.575683] Console: switching to colour frame buffer device 240x67
[ 3.614807] fb0: omapdrm frame buffer device
[ 3.619293] drm: registered panic notifier
[ 3.623596] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.630554] [drm] No driver support for vblank timestamp query.
[ 3.636779] [drm] Initialized omapdrm 1.0.0 20110917 on minor 0
[ 3.643188] ALSA device list:
[ 3.646362] #0: PandaES
[ 3.649108] #1: OMAPHDMI
[ 3.672424] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.680999] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.697906] devtmpfs: mounted
[ 3.701293] Freeing init memory: 392K
[ 3.705505] Write protecting the kernel text section c0008000 - c0809000
[ 4.419250] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; angstrom)
Welcome to The Ångström Distribution!
[ 4.534912] systemd[1]: Inserted module 'autofs4'
[ 4.541381] systemd[1]: Set hostname to <pandaboard>.
[ 4.706848] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 4.729522] systemd[1]: Found ordering cycle on basic.target/start
[ 4.736053] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.742736] systemd[1]: Walked on cycle path to dbus.socket/start
[ 4.749145] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.755859] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.762908] systemd[1]: Walked on cycle path to basic.target/start
[ 4.769409] systemd[1]: Breaking ordering cycle by deleting job dbus.socket/start
[ 4.777282] systemd[1]: Found ordering cycle on basic.target/start
[ 4.783782] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.790588] systemd[1]: Walked on cycle path to dropbear.socket/start
[ 4.797363] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.804107] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.811157] systemd[1]: Walked on cycle path to basic.target/start
[ 4.817657] systemd[1]: Breaking ordering cycle by deleting job dropbear.socket/start
[ 4.825897] systemd[1]: Found ordering cycle on basic.target/start
[ 4.832397] systemd[1]: Walked on cycle path to sockets.target/start
[ 4.839080] systemd[1]: Walked on cycle path to avahi-daemon.socket/start
[ 4.846221] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.852905] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.859954] systemd[1]: Walked on cycle path to basic.target/start
[ 4.866455] systemd[1]: Breaking ordering cycle by deleting job avahi-daemon.socket/start
[ 4.875061] systemd[1]: Found ordering cycle on basic.target/start
[ 4.881652] systemd[1]: Walked on cycle path to sysinit.target/start
[ 4.888366] systemd[1]: Walked on cycle path to alsa-state.service/start
[ 4.895385] systemd[1]: Walked on cycle path to basic.target/start
[ 4.901916] systemd[1]: Breaking ordering cycle by deleting job alsa-state.service/start
Expecting device dev-ttyO2.device...
[ OK ] Reached target Remote File Systems.
[ OK ] Listening on Syslog Socket.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on Delayed Shutdown Socket.
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[ OK ] Listening on udev Kernel Socket.
[ OK ] Listening on udev Control Socket.
[ OK ] Reached target Swap.
[ OK ] Listening on Journal Socket.
Starting LSB: The RPC portmapper...
[ OK ] Reached target Syslog.
[ OK ] Reached target Sockets.
Starting File System Check on Root Device...
Starting Load Kernel Modules...
Starting udev Kernel Device Manager...
Mounting Debug File System...
Starting Journal Service...
[ OK ] Started Journal Service.
Starting Apply Kernel Variables...
Starting udev Coldplug all Devices...
Mounting POSIX Message Queue File System...
[ OK ] Started LSB: The RPC portmapper.
[ OK ] Reached target RPC Port Mapper.
[ OK ] Mounted POSIX Message Queue F[ 5.354888] systemd-udevd[91]: starting version 189
ile System.
[ OK ] Mounted Debug File System.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started udev Kernel Device Manager.
[ 5.500183] Bluetooth: Core ver 2.16
[ 5.504119] NET: Registered protocol family 31
[ 5.508911] Bluetooth: HCI device and connection manager initialized
[ 5.516357] Bluetooth: HCI socket layer initialized
[ 5.523223] Bluetooth: L2CAP socket layer initialized
[ 5.528625] Bluetooth: SCO socket layer initialized
[ 5.566162] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ OK ] Started udev Coldplug all Devices.
[ 5.586212] systemd-journald[93]: Fixed max_use=50.0M max_size=6.2M min_size=64.0K keep_free=25.0M
[ 5.596649] systemd-journald[93]: Reserving 11384 entries in hash table.
[ 5.607116] systemd-journald[93]: Vacuuming...
[ 5.828857] NET: Registered protocol family 23
[ 5.890350] IrCOMM protocol (Dag Brattli)
systemd-fsck[87]: GEEXBOX: clean, 24090/481440 files, 639951/1923840 blocks
[ 5.993164] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 6.058441] Bluetooth: RFCOMM TTY layer initialized
[ 6.063903] Bluetooth: RFCOMM socket layer initialized
[ 6.069396] Bluetooth: RFCOMM ver 1.11
[ OK ] Started File System Check on Root Device.
[ OK ] Started Load Kernel Modules.
Mounting FUSE Control File System...
Starting Remount Root and Kernel File Systems...
[ OK ] Mounted FUSE Control File System.
[ OK ] Reached target Sound Card.
[ OK ] Found device /dev/ttyO2.
[ 6.469757] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Reached target Local File Systems (Pre).
Mounting /tmp...
Starting Load Random Seed...
[ OK ] Mounted /tmp.
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Recreate Volatile Files and Directories...
[ OK ] Started Load Random Seed.
[ OK ] Started Recreate Volatile Files and Directories.
[ OK ] Reached target System Initialization.
Starting Restore Sound Card State...
[ OK ] Reached target Basic System.
Starting LSB: Advanced Power Management daemon...
Starting Timestamping service...
[ OK ] Started Timestamping service.
Starting Kernel Logging Service...
[ OK ] Started Kernel Logging Service.
Starting System Logging Service...
[ OK ] Started System Logging Service.
Starting Enrico service...
[ 7.054748] cfg80211: Calling CRDA to update world regulatory domain
[ OK ] Started Restore Sound Card State.
[ OK ] Started LSB: Advanced Power Management daemon.
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
Starting Serial Getty on ttyO2...
OK ] Started Serial Getty on ttyO2.
[ 7.732177] systemd-journald[93]: Received SIGUSR1
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
[ OK ] Reached target Login Prompts.
[ 7.842926] systemd-journald[93]: Fixed max_use=739.6M max_size=92.4M min_size=64.0K keep_free=369.8M
[ 7.902801] systemd-journald[93]: Flushing to /var...
.---O---.
| | .-. o o
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution pandaboard ttyO2
Angstrom v2012.09 - Kernel 3.4.11
pandaboard login:
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-16 21:56 which kernel for pandaboard? Cliff Brake
2012-11-17 0:05 ` Denys Dmytriyenko
@ 2012-11-21 13:09 ` Leon Woestenberg
2012-11-21 16:06 ` Denys Dmytriyenko
1 sibling, 1 reply; 14+ messages in thread
From: Leon Woestenberg @ 2012-11-21 13:09 UTC (permalink / raw)
To: Cliff Brake; +Cc: meta-ti
[-- Attachment #1: Type: text/plain, Size: 817 bytes --]
Hello Cliff, all,
On Fri, Nov 16, 2012 at 10:56 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
>
> Uncompressing Linux... done, booting the kernel.
>
> (nothing more)
>
>
> I have tried to read through the whole thread and understand if there was
convergence on what the probable cause could be, but as I could not find
one.
Without intending to capture this thread:
I just experience the same on my TI AM 3730 board when I moved the
poky-denzil layer to the poky-danny layer and moved meta-ti to latest
(HEAD). I redid the whole build from scratch, and experienced the same
problem.
My kernel recipe is outside of meta-ti, so either I am picking up a faulty
toolchain for ARM, or I am including something from meta-ti that changed.
Might be unrelated to your problem.
Regards,
Leon.
[-- Attachment #2: Type: text/html, Size: 1141 bytes --]
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: which kernel for pandaboard?
2012-11-21 13:09 ` Leon Woestenberg
@ 2012-11-21 16:06 ` Denys Dmytriyenko
0 siblings, 0 replies; 14+ messages in thread
From: Denys Dmytriyenko @ 2012-11-21 16:06 UTC (permalink / raw)
To: Leon Woestenberg; +Cc: meta-ti
On Wed, Nov 21, 2012 at 02:09:24PM +0100, Leon Woestenberg wrote:
> Hello Cliff, all,
>
> On Fri, Nov 16, 2012 at 10:56 PM, Cliff Brake <cliff.brake@gmail.com> wrote:
>
> >
> > Uncompressing Linux... done, booting the kernel.
> >
> > (nothing more)
> >
> >
> I have tried to read through the whole thread and understand if there was
> convergence on what the probable cause could be, but as I could not find
> one.
> Without intending to capture this thread:
>
> I just experience the same on my TI AM 3730 board when I moved the
It cannot be the same, since we were discussing a problem with Cliff's
pandaboard, which is omap4.
> poky-denzil layer to the poky-danny layer and moved meta-ti to latest
> (HEAD). I redid the whole build from scratch, and experienced the same
> problem.
> My kernel recipe is outside of meta-ti, so either I am picking up a faulty
> toolchain for ARM, or I am including something from meta-ti that changed.
>
> Might be unrelated to your problem.
Are you saying you use your own kernel? Have you tried one of the kernels from
meta-ti?
--
Denys
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2012-11-21 16:06 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-16 21:56 which kernel for pandaboard? Cliff Brake
2012-11-17 0:05 ` Denys Dmytriyenko
[not found] ` <CAOd_LFwO7qx6HFrQOuGCJCYQ7vCMVikkZ80XX=3Hd=t8qDkOQA@mail.gmail.com>
2012-11-17 19:34 ` Cliff Brake
2012-11-18 12:06 ` Enrico
2012-11-19 16:42 ` Cliff Brake
2012-11-19 19:21 ` Cliff Brake
2012-11-19 20:29 ` Belisko Marek
2012-11-19 21:17 ` Cliff Brake
2012-11-20 14:02 ` Cliff Brake
2012-11-20 16:52 ` Nicolas Dechesne
2012-11-20 17:04 ` Denys Dmytriyenko
2012-11-21 12:58 ` Enrico
2012-11-21 13:09 ` Leon Woestenberg
2012-11-21 16:06 ` Denys Dmytriyenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.