* [PATCH 01/70] ARM: dts: gose: Add GPIO keys to DT
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate the GPIO keys in the gose device tree.
Based on similar work for the koelsch board by Laurent Pinchart.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Magnus Damm <damm+renesas@opensource.se>
---
arch/arm/boot/dts/r8a7793-gose.dts | 82 ++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index baa59fe84298..ccbc1c66cc6c 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -31,6 +31,88 @@
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-1 {
+ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_1>;
+ label = "SW2-1";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-2 {
+ gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_2>;
+ label = "SW2-2";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-3 {
+ gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_3>;
+ label = "SW2-3";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-4 {
+ gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_4>;
+ label = "SW2-4";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-a {
+ gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_A>;
+ label = "SW30";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-b {
+ gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_B>;
+ label = "SW31";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-c {
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_C>;
+ label = "SW32";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-d {
+ gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_D>;
+ label = "SW33";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-e {
+ gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_E>;
+ label = "SW34";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-f {
+ gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F>;
+ label = "SW35";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ key-g {
+ gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_G>;
+ label = "SW36";
+ gpio-key,wakeup;
+ debounce-interval = <20>;
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 02/70] ARM: dts: gose: Add GPIO leds to DT
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Instantiate the GPIO leds in the gose device tree.
Based on similar work for the koelsch board by Magnus Damm.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Magnus Damm <damm+renesas@opensource.se>
---
arch/arm/boot/dts/r8a7793-gose.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index ccbc1c66cc6c..90b587c3c736 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -113,6 +113,22 @@
debounce-interval = <20>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ led6 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ label = "LED6";
+ };
+ led7 {
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ label = "LED7";
+ };
+ led8 {
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ label = "LED8";
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 02/70] ARM: dts: gose: Add GPIO leds to DT
@ 2016-02-04 14:28 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate the GPIO leds in the gose device tree.
Based on similar work for the koelsch board by Magnus Damm.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Magnus Damm <damm+renesas@opensource.se>
---
arch/arm/boot/dts/r8a7793-gose.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index ccbc1c66cc6c..90b587c3c736 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -113,6 +113,22 @@
debounce-interval = <20>;
};
};
+
+ leds {
+ compatible = "gpio-leds";
+ led6 {
+ gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ label = "LED6";
+ };
+ led7 {
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ label = "LED7";
+ };
+ led8 {
+ gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ label = "LED8";
+ };
+ };
};
&extal_clk {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 03/70] ARM: dts: porter: add DU DT support
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
2016-02-04 14:28 ` [PATCH 01/70] ARM: dts: gose: Add GPIO keys to DT Simon Horman
2016-02-04 14:28 ` Simon Horman
@ 2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (67 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the Porter board dependent part of the DU device node.
Add the device node for Analog Devices ADV7511W HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect DU
and HDMI devices.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-porter.dts | 81 ++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6713b1ea732b..fe81fa0e478c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -78,6 +78,29 @@
states = <3300000 1
1800000 0>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ x3_clk: x3-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ x16_clk: x16-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&extal_clk {
@@ -139,6 +162,11 @@
renesas,groups = "can0_data";
renesas,function = "can0";
};
+
+ du_pins: du {
+ renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ renesas,function = "du";
+ };
};
&scif0 {
@@ -241,6 +269,38 @@
};
};
};
+
+ hdmi at 39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
};
&sata0 {
@@ -304,3 +364,24 @@
status = "okay";
};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+ <&mstp7_clks R8A7791_CLK_DU1>,
+ <&mstp7_clks R8A7791_CLK_LVDS0>,
+ <&x3_clk>, <&x16_clk>;
+ clock-names = "du.0", "du.1", "lvds.0",
+ "dclkin.0", "dclkin.1";
+
+ ports {
+ port at 1 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instantiate all the 9 I2C controllers in the disabled state.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 135 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aef9e69d6c26..f9d92de4f65b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -19,6 +19,15 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
spi0 = &qspi;
};
@@ -230,6 +239,120 @@
power-domains = <&cpg_clocks>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
@@ -820,19 +943,25 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7793_CLK_QSPI>;
+ <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+ R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+ R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
>;
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod";
+ "qspi_mod", "i2c5", "i2c6", "i2c4",
+ "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT
@ 2016-02-04 14:28 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Instantiate all the 9 I2C controllers in the disabled state.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 135 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 132 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index aef9e69d6c26..f9d92de4f65b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -19,6 +19,15 @@
#size-cells = <2>;
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ i2c8 = &i2c8;
spi0 = &qspi;
};
@@ -230,6 +239,120 @@
power-domains = <&cpg_clocks>;
};
+ /* The memory map in the User's Manual maps the cores to bus numbers */
+ i2c0: i2c at e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c1: i2c at e6518000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6518000 0 0x40>;
+ interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c at e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6530000 0 0x40>;
+ interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c at e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6540000 0 0x40>;
+ interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c4: i2c at e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c at e6528000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a7793";
+ reg = <0 0xe6528000 0 0x40>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
+ power-domains = <&cpg_clocks>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c at e60b0000 {
+ /* doesn't need pinmux */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c7: i2c at e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x425>;
+ interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ i2c8: i2c at e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x425>;
+ interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
pfc: pfc at e6060000 {
compatible = "renesas,pfc-r8a7793";
reg = <0 0xe6060000 0 0x250>;
@@ -820,19 +943,25 @@
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
<&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
- <&cpg_clocks R8A7793_CLK_QSPI>;
+ <&cpg_clocks R8A7793_CLK_QSPI>, <&hp_clk>,
+ <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
R8A7793_CLK_GPIO7 R8A7793_CLK_GPIO6
R8A7793_CLK_GPIO5 R8A7793_CLK_GPIO4
R8A7793_CLK_GPIO3 R8A7793_CLK_GPIO2
R8A7793_CLK_GPIO1 R8A7793_CLK_GPIO0
- R8A7793_CLK_QSPI_MOD
+ R8A7793_CLK_QSPI_MOD R8A7793_CLK_I2C5
+ R8A7793_CLK_IICDVFS R8A7793_CLK_I2C4
+ R8A7793_CLK_I2C3 R8A7793_CLK_I2C2
+ R8A7793_CLK_I2C1 R8A7793_CLK_I2C0
>;
clock-output-names =
"gpio7", "gpio6", "gpio5", "gpio4",
"gpio3", "gpio2", "gpio1", "gpio0",
- "qspi_mod";
+ "qspi_mod", "i2c5", "i2c6", "i2c4",
+ "i2c3", "i2c2", "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks at e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 05/70] ARM: dts: alt: Add QSPI device to DT
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Enable the QSPI controller in the alt device tree.
Based similar work for the silk board by by Vladimir Barinov and
Sergei Shtylyov.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794-alt.dts | 46 +++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 2394e4883786..773f304d1142 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -138,6 +138,13 @@
status = "okay";
};
+&pfc {
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+};
+
ðer {
pinctrl-0 = <ðer_pins &phy1_pins>;
pinctrl-names = "default";
@@ -197,3 +204,42 @@
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash@0 {
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "system";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition@80000 {
+ label = "user";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 05/70] ARM: dts: alt: Add QSPI device to DT
@ 2016-02-04 14:28 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:28 UTC (permalink / raw)
To: linux-arm-kernel
Enable the QSPI controller in the alt device tree.
Based similar work for the silk board by by Vladimir Barinov and
Sergei Shtylyov.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794-alt.dts | 46 +++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 2394e4883786..773f304d1142 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -138,6 +138,13 @@
status = "okay";
};
+&pfc {
+ qspi_pins: spi0 {
+ renesas,groups = "qspi_ctrl", "qspi_data4";
+ renesas,function = "qspi";
+ };
+};
+
ðer {
pinctrl-0 = <ðer_pins &phy1_pins>;
pinctrl-names = "default";
@@ -197,3 +204,42 @@
status = "okay";
};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+
+ flash at 0 {
+ compatible = "spansion,s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <30000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ spi-cpol;
+ spi-cpha;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "loader";
+ reg = <0x00000000 0x00040000>;
+ read-only;
+ };
+ partition at 40000 {
+ label = "system";
+ reg = <0x00040000 0x00040000>;
+ read-only;
+ };
+ partition at 80000 {
+ label = "user";
+ reg = <0x00080000 0x03f80000>;
+ };
+ };
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 06/70] ARM: dts: r8a7790: use fallback usbhs compatibility string
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use recently added fallback compatibility string in r8a7790 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 7dfd393bfc7e..4d9af0f46fab 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -746,7 +746,7 @@
};
hsusb: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7790";
+ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 06/70] ARM: dts: r8a7790: use fallback usbhs compatibility string
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7790 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7790.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 7dfd393bfc7e..4d9af0f46fab 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -746,7 +746,7 @@
};
hsusb: usb at e6590000 {
- compatible = "renesas,usbhs-r8a7790";
+ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 07/70] ARM: dts: r8a7791: use fallback usbhs compatibility string
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 2a369ddcb6fd..829224d2a3ed 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -822,7 +822,7 @@
};
hsusb: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7791";
+ compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 07/70] ARM: dts: r8a7791: use fallback usbhs compatibility string
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7791 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7791.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 2a369ddcb6fd..829224d2a3ed 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -822,7 +822,7 @@
};
hsusb: usb at e6590000 {
- compatible = "renesas,usbhs-r8a7791";
+ compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 08/70] ARM: dts: r8a7794: use fallback usbhs compatibility string
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (6 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (62 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use recently added fallback compatibility string in r8a7794 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 6c78f1fae90f..f8cd3a0beebf 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -724,7 +724,7 @@
};
hsusb: usb at e6590000 {
- compatible = "renesas,usbhs-r8a7794";
+ compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 09/70] ARM: dts: r8a7793: move dmac nodes
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Move dmac nodes in the r8a7793 device tree to match their location
in the r8a7791 device tree to aid comparison between the device
trees of these similar SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 124 ++++++++++++++++++++---------------------
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index f9d92de4f65b..0ce7cc420c9d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -239,6 +239,68 @@
power-domains = <&cpg_clocks>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
@@ -358,68 +420,6 @@
reg = <0 0xe6060000 0 0x250>;
};
- dmac0: dma-controller@e6700000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
- dmac1: dma-controller@e6720000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 09/70] ARM: dts: r8a7793: move dmac nodes
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Move dmac nodes in the r8a7793 device tree to match their location
in the r8a7791 device tree to aid comparison between the device
trees of these similar SoCs.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 124 ++++++++++++++++++++---------------------
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index f9d92de4f65b..0ce7cc420c9d 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -239,6 +239,68 @@
power-domains = <&cpg_clocks>;
};
+ dmac0: dma-controller at e6700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller at e6720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH
+ 0 308 IRQ_TYPE_LEVEL_HIGH
+ 0 309 IRQ_TYPE_LEVEL_HIGH
+ 0 310 IRQ_TYPE_LEVEL_HIGH
+ 0 311 IRQ_TYPE_LEVEL_HIGH
+ 0 312 IRQ_TYPE_LEVEL_HIGH
+ 0 313 IRQ_TYPE_LEVEL_HIGH
+ 0 314 IRQ_TYPE_LEVEL_HIGH
+ 0 315 IRQ_TYPE_LEVEL_HIGH
+ 0 316 IRQ_TYPE_LEVEL_HIGH
+ 0 317 IRQ_TYPE_LEVEL_HIGH
+ 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c at e6508000 {
#address-cells = <1>;
@@ -358,68 +420,6 @@
reg = <0 0xe6060000 0 0x250>;
};
- dmac0: dma-controller at e6700000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC0>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
- dmac1: dma-controller at e6720000 {
- compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
- reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14";
- clocks = <&mstp2_clks R8A7793_CLK_SYS_DMAC1>;
- clock-names = "fck";
- power-domains = <&cpg_clocks>;
- #dma-cells = <1>;
- dma-channels = <15>;
- };
-
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 10/70] ARM: dts: gose: add i2c2 bus to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Activate i2c2 bus in r8a7793/gose device tree.
Based on similar work for the r8a7791/koelsch by Wolfram Sang.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 90b587c3c736..987ed03b1e02 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -136,6 +136,11 @@
};
&pfc {
+ i2c2_pins: i2c2 {
+ renesas,groups = "i2c2";
+ renesas,function = "i2c2";
+ };
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
@@ -234,3 +239,17 @@
};
};
};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ eeprom@50 {
+ compatible = "renesas,r1ex24002", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 10/70] ARM: dts: gose: add i2c2 bus to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Activate i2c2 bus in r8a7793/gose device tree.
Based on similar work for the r8a7791/koelsch by Wolfram Sang.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 90b587c3c736..987ed03b1e02 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -136,6 +136,11 @@
};
&pfc {
+ i2c2_pins: i2c2 {
+ renesas,groups = "i2c2";
+ renesas,function = "i2c2";
+ };
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
@@ -234,3 +239,17 @@
};
};
};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <100000>;
+
+ eeprom at 50 {
+ compatible = "renesas,r1ex24002", "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 11/70] ARM: dts: r8a7790: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (9 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 12/70] ARM: dts: r8a7791: " Simon Horman
` (59 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7791 device tree.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 368 ++++++++++++++++++++---------------------
1 file changed, 184 insertions(+), 184 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4d9af0f46fab..cc7eccf0ada7 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -121,13 +121,13 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio at e6050000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -140,7 +140,7 @@
gpio1: gpio at e6051000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 30>;
@@ -153,7 +153,7 @@
gpio2: gpio at e6052000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 30>;
@@ -166,7 +166,7 @@
gpio3: gpio at e6053000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -179,7 +179,7 @@
gpio4: gpio at e6054000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -192,7 +192,7 @@
gpio5: gpio at e6055000 {
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -205,24 +205,24 @@
thermal at e61f0000 {
compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
cmt0: timer at ffca0000 {
compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -235,14 +235,14 @@
cmt1: timer at e6130000 {
compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -257,10 +257,10 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
power-domains = <&cpg_clocks>;
};
@@ -268,22 +268,22 @@
dmac0: dma-controller at e6700000 {
compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -299,22 +299,22 @@
dmac1: dma-controller at e6720000 {
compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -330,20 +330,20 @@
audma0: dma-controller at ec700000 {
compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
- 0 320 IRQ_TYPE_LEVEL_HIGH
- 0 321 IRQ_TYPE_LEVEL_HIGH
- 0 322 IRQ_TYPE_LEVEL_HIGH
- 0 323 IRQ_TYPE_LEVEL_HIGH
- 0 324 IRQ_TYPE_LEVEL_HIGH
- 0 325 IRQ_TYPE_LEVEL_HIGH
- 0 326 IRQ_TYPE_LEVEL_HIGH
- 0 327 IRQ_TYPE_LEVEL_HIGH
- 0 328 IRQ_TYPE_LEVEL_HIGH
- 0 329 IRQ_TYPE_LEVEL_HIGH
- 0 330 IRQ_TYPE_LEVEL_HIGH
- 0 331 IRQ_TYPE_LEVEL_HIGH
- 0 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -359,20 +359,20 @@
audma1: dma-controller at ec720000 {
compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
- 0 333 IRQ_TYPE_LEVEL_HIGH
- 0 334 IRQ_TYPE_LEVEL_HIGH
- 0 335 IRQ_TYPE_LEVEL_HIGH
- 0 336 IRQ_TYPE_LEVEL_HIGH
- 0 337 IRQ_TYPE_LEVEL_HIGH
- 0 338 IRQ_TYPE_LEVEL_HIGH
- 0 339 IRQ_TYPE_LEVEL_HIGH
- 0 340 IRQ_TYPE_LEVEL_HIGH
- 0 341 IRQ_TYPE_LEVEL_HIGH
- 0 342 IRQ_TYPE_LEVEL_HIGH
- 0 343 IRQ_TYPE_LEVEL_HIGH
- 0 344 IRQ_TYPE_LEVEL_HIGH
- 0 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -388,8 +388,8 @@
usb_dmac0: dma-controller at e65a0000 {
compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
- 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
power-domains = <&cpg_clocks>;
@@ -400,8 +400,8 @@
usb_dmac1: dma-controller at e65b0000 {
compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
- 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
power-domains = <&cpg_clocks>;
@@ -414,7 +414,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6508000 0 0x40>;
- interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <110>;
@@ -426,7 +426,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6518000 0 0x40>;
- interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -438,7 +438,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6530000 0 0x40>;
- interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -450,7 +450,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7790";
reg = <0 0xe6540000 0 0x40>;
- interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <110>;
@@ -462,7 +462,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
- interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
@@ -475,7 +475,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
- interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
@@ -488,7 +488,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x425>;
- interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
dma-names = "tx", "rx";
@@ -501,7 +501,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
@@ -512,7 +512,7 @@
mmcif0: mmc at ee200000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
@@ -525,7 +525,7 @@
mmcif1: mmc at ee220000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
- interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
dma-names = "tx", "rx";
@@ -543,7 +543,7 @@
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee100000 0 0x328>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
@@ -554,7 +554,7 @@
sdhi1: sd at ee120000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee120000 0 0x328>;
- interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
dma-names = "tx", "rx";
@@ -565,7 +565,7 @@
sdhi2: sd at ee140000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee140000 0 0x100>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
@@ -576,7 +576,7 @@
sdhi3: sd at ee160000 {
compatible = "renesas,sdhi-r8a7790";
reg = <0 0xee160000 0 0x100>;
- interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
@@ -587,7 +587,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7790", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
@@ -599,7 +599,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-r8a7790", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
@@ -611,7 +611,7 @@
scifa2: serial at e6c60000 {
compatible = "renesas,scifa-r8a7790", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
@@ -623,7 +623,7 @@
scifb0: serial at e6c20000 {
compatible = "renesas,scifb-r8a7790", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
@@ -635,7 +635,7 @@
scifb1: serial at e6c30000 {
compatible = "renesas,scifb-r8a7790", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
@@ -647,7 +647,7 @@
scifb2: serial at e6ce0000 {
compatible = "renesas,scifb-r8a7790", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
@@ -659,7 +659,7 @@
scif0: serial at e6e60000 {
compatible = "renesas,scif-r8a7790", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
- interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
@@ -671,7 +671,7 @@
scif1: serial at e6e68000 {
compatible = "renesas,scif-r8a7790", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
- interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
@@ -683,7 +683,7 @@
hscif0: serial at e62c0000 {
compatible = "renesas,hscif-r8a7790", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
@@ -695,7 +695,7 @@
hscif1: serial at e62c8000 {
compatible = "renesas,hscif-r8a7790", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
@@ -707,7 +707,7 @@
ether: ethernet at ee700000 {
compatible = "renesas,ether-r8a7790";
reg = <0 0xee700000 0 0x400>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -719,7 +719,7 @@
avb: ethernet at e6800000 {
compatible = "renesas,etheravb-r8a7790";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
- interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -730,7 +730,7 @@
sata0: sata at ee300000 {
compatible = "renesas,sata-r8a7790";
reg = <0 0xee300000 0 0x2000>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -739,7 +739,7 @@
sata1: sata at ee500000 {
compatible = "renesas,sata-r8a7790";
reg = <0 0xee500000 0 0x2000>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -748,7 +748,7 @@
hsusb: usb at e6590000 {
compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
@@ -783,7 +783,7 @@
vin0: video at e6ef0000 {
compatible = "renesas,vin-r8a7790";
reg = <0 0xe6ef0000 0 0x1000>;
- interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -792,7 +792,7 @@
vin1: video at e6ef1000 {
compatible = "renesas,vin-r8a7790";
reg = <0 0xe6ef1000 0 0x1000>;
- interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -801,7 +801,7 @@
vin2: video at e6ef2000 {
compatible = "renesas,vin-r8a7790";
reg = <0 0xe6ef2000 0 0x1000>;
- interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -810,7 +810,7 @@
vin3: video at e6ef3000 {
compatible = "renesas,vin-r8a7790";
reg = <0 0xe6ef3000 0 0x1000>;
- interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -819,7 +819,7 @@
vsp1 at fe920000 {
compatible = "renesas,vsp1";
reg = <0 0xfe920000 0 0x8000>;
- interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
power-domains = <&cpg_clocks>;
@@ -832,7 +832,7 @@
vsp1 at fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
- interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
power-domains = <&cpg_clocks>;
@@ -846,7 +846,7 @@
vsp1 at fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
- interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
power-domains = <&cpg_clocks>;
@@ -860,7 +860,7 @@
vsp1 at fe938000 {
compatible = "renesas,vsp1";
reg = <0 0xfe938000 0 0x8000>;
- interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
power-domains = <&cpg_clocks>;
@@ -877,9 +877,9 @@
<0 0xfeb90000 0 0x1c>,
<0 0xfeb94000 0 0x1c>;
reg-names = "du", "lvds.0", "lvds.1";
- interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
- <0 268 IRQ_TYPE_LEVEL_HIGH>,
- <0 269 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_DU0>,
<&mstp7_clks R8A7790_CLK_DU1>,
<&mstp7_clks R8A7790_CLK_DU2>,
@@ -913,7 +913,7 @@
can0: can at e6e80000 {
compatible = "renesas,can-r8a7790";
reg = <0 0xe6e80000 0 0x1000>;
- interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_RCAN0>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
@@ -924,7 +924,7 @@
can1: can at e6e88000 {
compatible = "renesas,can-r8a7790";
reg = <0 0xe6e88000 0 0x1000>;
- interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_RCAN1>,
<&cpg_clocks R8A7790_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
@@ -935,7 +935,7 @@
jpu: jpeg-codec at fe980000 {
compatible = "renesas,jpu-r8a7790";
reg = <0 0xfe980000 0 0x10300>;
- interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7790_CLK_JPU>;
power-domains = <&cpg_clocks>;
};
@@ -1401,7 +1401,7 @@
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7790", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
@@ -1415,7 +1415,7 @@
msiof0: spi at e6e20000 {
compatible = "renesas,msiof-r8a7790";
reg = <0 0xe6e20000 0 0x0064>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
@@ -1428,7 +1428,7 @@
msiof1: spi at e6e10000 {
compatible = "renesas,msiof-r8a7790";
reg = <0 0xe6e10000 0 0x0064>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
@@ -1441,7 +1441,7 @@
msiof2: spi at e6e00000 {
compatible = "renesas,msiof-r8a7790";
reg = <0 0xe6e00000 0 0x0064>;
- interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
@@ -1454,7 +1454,7 @@
msiof3: spi at e6c90000 {
compatible = "renesas,msiof-r8a7790";
reg = <0 0xe6c90000 0 0x0064>;
- interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
dma-names = "tx", "rx";
@@ -1467,7 +1467,7 @@
xhci: usb at ee000000 {
compatible = "renesas,xhci-r8a7790";
reg = <0 0xee000000 0 0xc00>;
- interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
power-domains = <&cpg_clocks>;
phys = <&usb2 1>;
@@ -1480,7 +1480,7 @@
device_type = "pci";
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -1491,9 +1491,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb at 0,1 {
reg = <0x800 0 0 0 0>;
@@ -1515,7 +1515,7 @@
device_type = "pci";
reg = <0 0xee0b0000 0 0xc00>,
<0 0xee0a0000 0 0x1100>;
- interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -1526,9 +1526,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};
pci2: pci at ee0d0000 {
@@ -1538,7 +1538,7 @@
power-domains = <&cpg_clocks>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
bus-range = <2 2>;
@@ -1547,9 +1547,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb at 0,1 {
reg = <0x800 0 0 0 0>;
@@ -1580,12 +1580,12 @@
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
- interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
- <0 117 IRQ_TYPE_LEVEL_HIGH>,
- <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&cpg_clocks>;
@@ -1664,52 +1664,52 @@
rcar_sound,src {
src0: src at 0 {
- interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
src1: src at 1 {
- interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
src2: src at 2 {
- interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
src3: src at 3 {
- interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
src4: src at 4 {
- interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
src5: src at 5 {
- interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
src6: src at 6 {
- interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
src7: src at 7 {
- interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
src8: src at 8 {
- interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
src9: src at 9 {
- interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
@@ -1717,52 +1717,52 @@
rcar_sound,ssi {
ssi0: ssi at 0 {
- interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi at 1 {
- interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi at 2 {
- interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi at 3 {
- interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi at 4 {
- interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi at 5 {
- interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi at 6 {
- interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi at 7 {
- interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi at 8 {
- interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi at 9 {
- interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
@@ -1772,8 +1772,8 @@
ipmmu_sy0: mmu at e6280000 {
compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
- interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1781,7 +1781,7 @@
ipmmu_sy1: mmu at e6290000 {
compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1789,8 +1789,8 @@
ipmmu_ds: mmu at e6740000 {
compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1798,7 +1798,7 @@
ipmmu_mp: mmu at ec680000 {
compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
- interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1806,8 +1806,8 @@
ipmmu_mx: mmu at fe951000 {
compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1815,7 +1815,7 @@
ipmmu_rt: mmu at ffc80000 {
compatible = "renesas,ipmmu-r8a7790", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
- interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 12/70] ARM: dts: r8a7791: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (10 preceding siblings ...)
2016-02-04 14:29 ` [PATCH 11/70] ARM: dts: r8a7790: use GIC_* defines Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 13/70] ARM: dts: silk: add DU DT support Simon Horman
` (58 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7791 device tree.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 386 ++++++++++++++++++++---------------------
1 file changed, 193 insertions(+), 193 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 829224d2a3ed..6b3b02c0c58a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -78,13 +78,13 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio at e6050000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -97,7 +97,7 @@
gpio1: gpio at e6051000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 26>;
@@ -110,7 +110,7 @@
gpio2: gpio at e6052000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -123,7 +123,7 @@
gpio3: gpio at e6053000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -136,7 +136,7 @@
gpio4: gpio at e6054000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -149,7 +149,7 @@
gpio5: gpio at e6055000 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -162,7 +162,7 @@
gpio6: gpio at e6055400 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 32>;
@@ -175,7 +175,7 @@
gpio7: gpio at e6055800 {
compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar";
reg = <0 0xe6055800 0 0x50>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 224 26>;
@@ -188,24 +188,24 @@
thermal at e61f0000 {
compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
cmt0: timer at ffca0000 {
compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -218,14 +218,14 @@
cmt1: timer at e6130000 {
compatible = "renesas,cmt-48-r8a7791", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -240,16 +240,16 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
power-domains = <&cpg_clocks>;
};
@@ -257,22 +257,22 @@
dmac0: dma-controller at e6700000 {
compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -288,22 +288,22 @@
dmac1: dma-controller at e6720000 {
compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -319,20 +319,20 @@
audma0: dma-controller at ec700000 {
compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xec700000 0 0x10000>;
- interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
- 0 320 IRQ_TYPE_LEVEL_HIGH
- 0 321 IRQ_TYPE_LEVEL_HIGH
- 0 322 IRQ_TYPE_LEVEL_HIGH
- 0 323 IRQ_TYPE_LEVEL_HIGH
- 0 324 IRQ_TYPE_LEVEL_HIGH
- 0 325 IRQ_TYPE_LEVEL_HIGH
- 0 326 IRQ_TYPE_LEVEL_HIGH
- 0 327 IRQ_TYPE_LEVEL_HIGH
- 0 328 IRQ_TYPE_LEVEL_HIGH
- 0 329 IRQ_TYPE_LEVEL_HIGH
- 0 330 IRQ_TYPE_LEVEL_HIGH
- 0 331 IRQ_TYPE_LEVEL_HIGH
- 0 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -348,20 +348,20 @@
audma1: dma-controller at ec720000 {
compatible = "renesas,dmac-r8a7791", "renesas,rcar-dmac";
reg = <0 0xec720000 0 0x10000>;
- interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
- 0 333 IRQ_TYPE_LEVEL_HIGH
- 0 334 IRQ_TYPE_LEVEL_HIGH
- 0 335 IRQ_TYPE_LEVEL_HIGH
- 0 336 IRQ_TYPE_LEVEL_HIGH
- 0 337 IRQ_TYPE_LEVEL_HIGH
- 0 338 IRQ_TYPE_LEVEL_HIGH
- 0 339 IRQ_TYPE_LEVEL_HIGH
- 0 340 IRQ_TYPE_LEVEL_HIGH
- 0 341 IRQ_TYPE_LEVEL_HIGH
- 0 342 IRQ_TYPE_LEVEL_HIGH
- 0 343 IRQ_TYPE_LEVEL_HIGH
- 0 344 IRQ_TYPE_LEVEL_HIGH
- 0 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -377,8 +377,8 @@
usb_dmac0: dma-controller at e65a0000 {
compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
- 0 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
power-domains = <&cpg_clocks>;
@@ -389,8 +389,8 @@
usb_dmac1: dma-controller at e65b0000 {
compatible = "renesas,r8a7791-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
- 0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
power-domains = <&cpg_clocks>;
@@ -404,7 +404,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
reg = <0 0xe6508000 0 0x40>;
- interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C0>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -416,7 +416,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
reg = <0 0xe6518000 0 0x40>;
- interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C1>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -428,7 +428,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
reg = <0 0xe6530000 0 0x40>;
- interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C2>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -440,7 +440,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
reg = <0 0xe6540000 0 0x40>;
- interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C3>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -452,7 +452,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
reg = <0 0xe6520000 0 0x40>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C4>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -465,7 +465,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7791";
reg = <0 0xe6528000 0 0x40>;
- interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_I2C5>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <110>;
@@ -478,7 +478,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
@@ -491,7 +491,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
- interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
@@ -504,7 +504,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
- interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
@@ -520,7 +520,7 @@
mmcif0: mmc at ee200000 {
compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
@@ -533,7 +533,7 @@
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee100000 0 0x328>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
dma-names = "tx", "rx";
@@ -544,7 +544,7 @@
sdhi1: sd at ee140000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee140000 0 0x100>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
dma-names = "tx", "rx";
@@ -555,7 +555,7 @@
sdhi2: sd at ee160000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee160000 0 0x100>;
- interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
dma-names = "tx", "rx";
@@ -566,7 +566,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7791", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
@@ -578,7 +578,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-r8a7791", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
@@ -590,7 +590,7 @@
scifa2: serial at e6c60000 {
compatible = "renesas,scifa-r8a7791", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
@@ -602,7 +602,7 @@
scifa3: serial at e6c70000 {
compatible = "renesas,scifa-r8a7791", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
@@ -614,7 +614,7 @@
scifa4: serial at e6c78000 {
compatible = "renesas,scifa-r8a7791", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
@@ -626,7 +626,7 @@
scifa5: serial at e6c80000 {
compatible = "renesas,scifa-r8a7791", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
@@ -638,7 +638,7 @@
scifb0: serial at e6c20000 {
compatible = "renesas,scifb-r8a7791", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
@@ -650,7 +650,7 @@
scifb1: serial at e6c30000 {
compatible = "renesas,scifb-r8a7791", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
@@ -662,7 +662,7 @@
scifb2: serial at e6ce0000 {
compatible = "renesas,scifb-r8a7791", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
@@ -674,7 +674,7 @@
scif0: serial at e6e60000 {
compatible = "renesas,scif-r8a7791", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
- interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
@@ -686,7 +686,7 @@
scif1: serial at e6e68000 {
compatible = "renesas,scif-r8a7791", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
- interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
@@ -698,7 +698,7 @@
scif2: serial at e6e58000 {
compatible = "renesas,scif-r8a7791", "renesas,scif";
reg = <0 0xe6e58000 0 64>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
@@ -710,7 +710,7 @@
scif3: serial at e6ea8000 {
compatible = "renesas,scif-r8a7791", "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
@@ -722,7 +722,7 @@
scif4: serial at e6ee0000 {
compatible = "renesas,scif-r8a7791", "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
@@ -734,7 +734,7 @@
scif5: serial at e6ee8000 {
compatible = "renesas,scif-r8a7791", "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
@@ -746,7 +746,7 @@
hscif0: serial at e62c0000 {
compatible = "renesas,hscif-r8a7791", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
@@ -758,7 +758,7 @@
hscif1: serial at e62c8000 {
compatible = "renesas,hscif-r8a7791", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
@@ -770,7 +770,7 @@
hscif2: serial at e62d0000 {
compatible = "renesas,hscif-r8a7791", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
- interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
@@ -782,7 +782,7 @@
ether: ethernet at ee700000 {
compatible = "renesas,ether-r8a7791";
reg = <0 0xee700000 0 0x400>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -795,7 +795,7 @@
compatible = "renesas,etheravb-r8a7791",
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
- interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -806,7 +806,7 @@
sata0: sata at ee300000 {
compatible = "renesas,sata-r8a7791";
reg = <0 0xee300000 0 0x2000>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -815,7 +815,7 @@
sata1: sata at ee500000 {
compatible = "renesas,sata-r8a7791";
reg = <0 0xee500000 0 0x2000>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_SATA1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -824,7 +824,7 @@
hsusb: usb at e6590000 {
compatible = "renesas,usbhs-r8a7791", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
@@ -859,7 +859,7 @@
vin0: video at e6ef0000 {
compatible = "renesas,vin-r8a7791";
reg = <0 0xe6ef0000 0 0x1000>;
- interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -868,7 +868,7 @@
vin1: video at e6ef1000 {
compatible = "renesas,vin-r8a7791";
reg = <0 0xe6ef1000 0 0x1000>;
- interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -877,7 +877,7 @@
vin2: video at e6ef2000 {
compatible = "renesas,vin-r8a7791";
reg = <0 0xe6ef2000 0 0x1000>;
- interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7791_CLK_VIN2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -886,7 +886,7 @@
vsp1 at fe928000 {
compatible = "renesas,vsp1";
reg = <0 0xfe928000 0 0x8000>;
- interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
power-domains = <&cpg_clocks>;
@@ -900,7 +900,7 @@
vsp1 at fe930000 {
compatible = "renesas,vsp1";
reg = <0 0xfe930000 0 0x8000>;
- interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
power-domains = <&cpg_clocks>;
@@ -914,7 +914,7 @@
vsp1 at fe938000 {
compatible = "renesas,vsp1";
reg = <0 0xfe938000 0 0x8000>;
- interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
power-domains = <&cpg_clocks>;
@@ -930,8 +930,8 @@
reg = <0 0xfeb00000 0 0x40000>,
<0 0xfeb90000 0 0x1c>;
reg-names = "du", "lvds.0";
- interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
- <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_DU0>,
<&mstp7_clks R8A7791_CLK_DU1>,
<&mstp7_clks R8A7791_CLK_LVDS0>;
@@ -958,7 +958,7 @@
can0: can at e6e80000 {
compatible = "renesas,can-r8a7791";
reg = <0 0xe6e80000 0 0x1000>;
- interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
@@ -969,7 +969,7 @@
can1: can at e6e88000 {
compatible = "renesas,can-r8a7791";
reg = <0 0xe6e88000 0 0x1000>;
- interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_RCAN1>,
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
@@ -980,7 +980,7 @@
jpu: jpeg-codec at fe980000 {
compatible = "renesas,jpu-r8a7791";
reg = <0 0xfe980000 0 0x10300>;
- interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7791_CLK_JPU>;
power-domains = <&cpg_clocks>;
};
@@ -1432,7 +1432,7 @@
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7791", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
@@ -1446,7 +1446,7 @@
msiof0: spi at e6e20000 {
compatible = "renesas,msiof-r8a7791";
reg = <0 0xe6e20000 0 0x0064>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
dma-names = "tx", "rx";
@@ -1459,7 +1459,7 @@
msiof1: spi at e6e10000 {
compatible = "renesas,msiof-r8a7791";
reg = <0 0xe6e10000 0 0x0064>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
dma-names = "tx", "rx";
@@ -1472,7 +1472,7 @@
msiof2: spi at e6e00000 {
compatible = "renesas,msiof-r8a7791";
reg = <0 0xe6e00000 0 0x0064>;
- interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
dma-names = "tx", "rx";
@@ -1485,7 +1485,7 @@
xhci: usb at ee000000 {
compatible = "renesas,xhci-r8a7791";
reg = <0 0xee000000 0 0xc00>;
- interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
power-domains = <&cpg_clocks>;
phys = <&usb2 1>;
@@ -1498,7 +1498,7 @@
device_type = "pci";
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -1509,9 +1509,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb at 0,1 {
reg = <0x800 0 0 0 0>;
@@ -1533,7 +1533,7 @@
device_type = "pci";
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -1544,9 +1544,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb at 0,1 {
reg = <0x800 0 0 0 0>;
@@ -1577,12 +1577,12 @@
/* Map all possible DDR as inbound ranges */
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
- interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
- <0 117 IRQ_TYPE_LEVEL_HIGH>,
- <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&cpg_clocks>;
@@ -1592,8 +1592,8 @@
ipmmu_sy0: mmu at e6280000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
- interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1601,7 +1601,7 @@
ipmmu_sy1: mmu at e6290000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1609,8 +1609,8 @@
ipmmu_ds: mmu at e6740000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1618,7 +1618,7 @@
ipmmu_mp: mmu at ec680000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
- interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1626,8 +1626,8 @@
ipmmu_mx: mmu at fe951000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1635,7 +1635,7 @@
ipmmu_rt: mmu at ffc80000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
- interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1643,8 +1643,8 @@
ipmmu_gp: mmu at e62a0000 {
compatible = "renesas,ipmmu-r8a7791", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
- interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
- <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1721,52 +1721,52 @@
rcar_sound,src {
src0: src at 0 {
- interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
src1: src at 1 {
- interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
src2: src at 2 {
- interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
src3: src at 3 {
- interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
src4: src at 4 {
- interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
src5: src at 5 {
- interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
src6: src at 6 {
- interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
src7: src at 7 {
- interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
src8: src at 8 {
- interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
src9: src at 9 {
- interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
@@ -1774,52 +1774,52 @@
rcar_sound,ssi {
ssi0: ssi at 0 {
- interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi at 1 {
- interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi at 2 {
- interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi at 3 {
- interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi at 4 {
- interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi at 5 {
- interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi at 6 {
- interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi at 7 {
- interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi at 8 {
- interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi at 9 {
- interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 13/70] ARM: dts: silk: add DU DT support
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (11 preceding siblings ...)
2016-02-04 14:29 ` [PATCH 12/70] ARM: dts: r8a7791: " Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (57 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the SILK board dependent part of the DU device node.
Add the device nodes for the Analog Devices ADV7511W HDMI transmitter
(connected to DU0) and ADV7123 video DAC (connected to DU1). Add the
necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA
connectors.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-silk.dts | 109 +++++++++++++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 5153e3af25d9..98b8bcca84da 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -64,6 +64,61 @@
states = <3300000 1
1800000 0>;
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ x2_clk: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ x3_clk: x3-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&extal_clk {
@@ -164,6 +219,38 @@
};
};
};
+
+ hdmi at 39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
};
&mmcif0 {
@@ -258,3 +345,25 @@
&usbphy {
status = "okay";
};
+
+&du {
+ status = "okay";
+
+ clocks = <&mstp7_clks R8A7794_CLK_DU0>,
+ <&mstp7_clks R8A7794_CLK_DU0>,
+ <&x2_clk>, <&x3_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
+
+ ports {
+ port at 0 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ port at 1 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 14/70] ARM: dts: r8a7793: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use GIC_* defines for GIC interrupt cells in r8a7793 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 216 ++++++++++++++++++++---------------------
1 file changed, 108 insertions(+), 108 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 0ce7cc420c9d..ea1196b99d52 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -63,13 +63,13 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -82,7 +82,7 @@
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 26>;
@@ -95,7 +95,7 @@
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -108,7 +108,7 @@
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -121,7 +121,7 @@
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -134,7 +134,7 @@
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -147,7 +147,7 @@
gpio6: gpio@e6055400 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 32>;
@@ -160,7 +160,7 @@
gpio7: gpio@e6055800 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6055800 0 0x50>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 224 26>;
@@ -173,24 +173,24 @@
thermal@e61f0000 {
compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
cmt0: timer@ffca0000 {
compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -203,14 +203,14 @@
cmt1: timer@e6130000 {
compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -225,16 +225,16 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
power-domains = <&cpg_clocks>;
};
@@ -242,22 +242,22 @@
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -273,22 +273,22 @@
dmac1: dma-controller@e6720000 {
compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -307,7 +307,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6508000 0 0x40>;
- interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -319,7 +319,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6518000 0 0x40>;
- interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -331,7 +331,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6530000 0 0x40>;
- interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -343,7 +343,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6540000 0 0x40>;
- interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -355,7 +355,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6520000 0 0x40>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -368,7 +368,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6528000 0 0x40>;
- interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <110>;
@@ -381,7 +381,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
@@ -394,7 +394,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
- interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
@@ -407,7 +407,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
- interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
@@ -423,7 +423,7 @@
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
@@ -435,7 +435,7 @@
scifa1: serial@e6c50000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
@@ -447,7 +447,7 @@
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
@@ -459,7 +459,7 @@
scifa3: serial@e6c70000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
@@ -471,7 +471,7 @@
scifa4: serial@e6c78000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
@@ -483,7 +483,7 @@
scifa5: serial@e6c80000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
@@ -495,7 +495,7 @@
scifb0: serial@e6c20000 {
compatible = "renesas,scifb-r8a7793", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
@@ -507,7 +507,7 @@
scifb1: serial@e6c30000 {
compatible = "renesas,scifb-r8a7793", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
@@ -519,7 +519,7 @@
scifb2: serial@e6ce0000 {
compatible = "renesas,scifb-r8a7793", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
@@ -531,7 +531,7 @@
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
- interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
@@ -543,7 +543,7 @@
scif1: serial@e6e68000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
- interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
@@ -555,7 +555,7 @@
scif2: serial@e6e58000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e58000 0 64>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
@@ -567,7 +567,7 @@
scif3: serial@e6ea8000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
@@ -579,7 +579,7 @@
scif4: serial@e6ee0000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
@@ -591,7 +591,7 @@
scif5: serial@e6ee8000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
@@ -603,7 +603,7 @@
hscif0: serial@e62c0000 {
compatible = "renesas,hscif-r8a7793", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
@@ -615,7 +615,7 @@
hscif1: serial@e62c8000 {
compatible = "renesas,hscif-r8a7793", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
@@ -627,7 +627,7 @@
hscif2: serial@e62d0000 {
compatible = "renesas,hscif-r8a7793", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
- interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
@@ -639,7 +639,7 @@
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7793";
reg = <0 0xee700000 0 0x400>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -651,7 +651,7 @@
qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7793", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
@@ -667,8 +667,8 @@
reg = <0 0xfeb00000 0 0x40000>,
<0 0xfeb90000 0 0x1c>;
reg-names = "du", "lvds.0";
- interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
- <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_DU0>,
<&mstp7_clks R8A7793_CLK_DU1>,
<&mstp7_clks R8A7793_CLK_LVDS0>;
@@ -978,8 +978,8 @@
ipmmu_sy0: mmu@e6280000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
- interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -987,7 +987,7 @@
ipmmu_sy1: mmu@e6290000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -995,8 +995,8 @@
ipmmu_ds: mmu@e6740000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1004,7 +1004,7 @@
ipmmu_mp: mmu@ec680000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
- interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1012,8 +1012,8 @@
ipmmu_mx: mmu@fe951000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1021,7 +1021,7 @@
ipmmu_rt: mmu@ffc80000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
- interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1029,8 +1029,8 @@
ipmmu_gp: mmu@e62a0000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
- interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
- <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 14/70] ARM: dts: r8a7793: use GIC_* defines
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7793 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7793.dtsi | 216 ++++++++++++++++++++---------------------
1 file changed, 108 insertions(+), 108 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 0ce7cc420c9d..ea1196b99d52 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -63,13 +63,13 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio at e6050000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -82,7 +82,7 @@
gpio1: gpio at e6051000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 26>;
@@ -95,7 +95,7 @@
gpio2: gpio at e6052000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -108,7 +108,7 @@
gpio3: gpio at e6053000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -121,7 +121,7 @@
gpio4: gpio at e6054000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -134,7 +134,7 @@
gpio5: gpio at e6055000 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -147,7 +147,7 @@
gpio6: gpio at e6055400 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 32>;
@@ -160,7 +160,7 @@
gpio7: gpio at e6055800 {
compatible = "renesas,gpio-r8a7793", "renesas,gpio-rcar";
reg = <0 0xe6055800 0 0x50>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 224 26>;
@@ -173,24 +173,24 @@
thermal at e61f0000 {
compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
power-domains = <&cpg_clocks>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
cmt0: timer at ffca0000 {
compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7793_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -203,14 +203,14 @@
cmt1: timer at e6130000 {
compatible = "renesas,cmt-48-r8a7793", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -225,16 +225,16 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7793_CLK_IRQC>;
power-domains = <&cpg_clocks>;
};
@@ -242,22 +242,22 @@
dmac0: dma-controller at e6700000 {
compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -273,22 +273,22 @@
dmac1: dma-controller at e6720000 {
compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -307,7 +307,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6508000 0 0x40>;
- interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C0>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -319,7 +319,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6518000 0 0x40>;
- interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C1>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -331,7 +331,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6530000 0 0x40>;
- interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C2>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -343,7 +343,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6540000 0 0x40>;
- interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C3>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -355,7 +355,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6520000 0 0x40>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C4>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <6>;
@@ -368,7 +368,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7793";
reg = <0 0xe6528000 0 0x40>;
- interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_I2C5>;
power-domains = <&cpg_clocks>;
i2c-scl-internal-delay-ns = <110>;
@@ -381,7 +381,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x425>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
dma-names = "tx", "rx";
@@ -394,7 +394,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x425>;
- interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
dma-names = "tx", "rx";
@@ -407,7 +407,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7793", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x425>;
- interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
dma-names = "tx", "rx";
@@ -423,7 +423,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
@@ -435,7 +435,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
@@ -447,7 +447,7 @@
scifa2: serial at e6c60000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
@@ -459,7 +459,7 @@
scifa3: serial at e6c70000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
@@ -471,7 +471,7 @@
scifa4: serial at e6c78000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
@@ -483,7 +483,7 @@
scifa5: serial at e6c80000 {
compatible = "renesas,scifa-r8a7793", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
@@ -495,7 +495,7 @@
scifb0: serial at e6c20000 {
compatible = "renesas,scifb-r8a7793", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
@@ -507,7 +507,7 @@
scifb1: serial at e6c30000 {
compatible = "renesas,scifb-r8a7793", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
@@ -519,7 +519,7 @@
scifb2: serial at e6ce0000 {
compatible = "renesas,scifb-r8a7793", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
@@ -531,7 +531,7 @@
scif0: serial at e6e60000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
- interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
@@ -543,7 +543,7 @@
scif1: serial at e6e68000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
- interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
@@ -555,7 +555,7 @@
scif2: serial at e6e58000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6e58000 0 64>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
@@ -567,7 +567,7 @@
scif3: serial at e6ea8000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
@@ -579,7 +579,7 @@
scif4: serial at e6ee0000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
@@ -591,7 +591,7 @@
scif5: serial at e6ee8000 {
compatible = "renesas,scif-r8a7793", "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
@@ -603,7 +603,7 @@
hscif0: serial at e62c0000 {
compatible = "renesas,hscif-r8a7793", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
@@ -615,7 +615,7 @@
hscif1: serial at e62c8000 {
compatible = "renesas,hscif-r8a7793", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
@@ -627,7 +627,7 @@
hscif2: serial at e62d0000 {
compatible = "renesas,hscif-r8a7793", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
- interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
@@ -639,7 +639,7 @@
ether: ethernet at ee700000 {
compatible = "renesas,ether-r8a7793";
reg = <0 0xee700000 0 0x400>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7793_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -651,7 +651,7 @@
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7793", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
@@ -667,8 +667,8 @@
reg = <0 0xfeb00000 0 0x40000>,
<0 0xfeb90000 0 0x1c>;
reg-names = "du", "lvds.0";
- interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
- <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_DU0>,
<&mstp7_clks R8A7793_CLK_DU1>,
<&mstp7_clks R8A7793_CLK_LVDS0>;
@@ -978,8 +978,8 @@
ipmmu_sy0: mmu at e6280000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
- interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -987,7 +987,7 @@
ipmmu_sy1: mmu at e6290000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -995,8 +995,8 @@
ipmmu_ds: mmu at e6740000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1004,7 +1004,7 @@
ipmmu_mp: mmu at ec680000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
- interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1012,8 +1012,8 @@
ipmmu_mx: mmu at fe951000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1021,7 +1021,7 @@
ipmmu_rt: mmu at ffc80000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xffc80000 0 0x1000>;
- interrupts = <0 307 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1029,8 +1029,8 @@
ipmmu_gp: mmu at e62a0000 {
compatible = "renesas,ipmmu-r8a7793", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
- interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
- <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 15/70] ARM: dts: r8a7794: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use GIC_* defines for GIC interrupt cells in r8a7794 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 234 ++++++++++++++++++++---------------------
1 file changed, 117 insertions(+), 117 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index f8cd3a0beebf..21be4bdc4001 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -59,13 +59,13 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -78,7 +78,7 @@
gpio1: gpio@e6051000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 26>;
@@ -91,7 +91,7 @@
gpio2: gpio@e6052000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -104,7 +104,7 @@
gpio3: gpio@e6053000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -117,7 +117,7 @@
gpio4: gpio@e6054000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -130,7 +130,7 @@
gpio5: gpio@e6055000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 28>;
@@ -143,7 +143,7 @@
gpio6: gpio@e6055400 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 26>;
@@ -156,8 +156,8 @@
cmt0: timer@ffca0000 {
compatible = "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -170,14 +170,14 @@
cmt1: timer@e6130000 {
compatible = "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -189,10 +189,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
irqc0: interrupt-controller@e61c0000 {
@@ -200,16 +200,16 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
power-domains = <&cpg_clocks>;
};
@@ -222,22 +222,22 @@
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -253,22 +253,22 @@
dmac1: dma-controller@e6720000 {
compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -284,7 +284,7 @@
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
@@ -296,7 +296,7 @@
scifa1: serial@e6c50000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
@@ -308,7 +308,7 @@
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
@@ -320,7 +320,7 @@
scifa3: serial@e6c70000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
@@ -332,7 +332,7 @@
scifa4: serial@e6c78000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
@@ -344,7 +344,7 @@
scifa5: serial@e6c80000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
@@ -356,7 +356,7 @@
scifb0: serial@e6c20000 {
compatible = "renesas,scifb-r8a7794", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
@@ -368,7 +368,7 @@
scifb1: serial@e6c30000 {
compatible = "renesas,scifb-r8a7794", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
@@ -380,7 +380,7 @@
scifb2: serial@e6ce0000 {
compatible = "renesas,scifb-r8a7794", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
@@ -392,7 +392,7 @@
scif0: serial@e6e60000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
- interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
@@ -404,7 +404,7 @@
scif1: serial@e6e68000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
- interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
@@ -416,7 +416,7 @@
scif2: serial@e6e58000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6e58000 0 64>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
@@ -428,7 +428,7 @@
scif3: serial@e6ea8000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
@@ -440,7 +440,7 @@
scif4: serial@e6ee0000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
@@ -452,7 +452,7 @@
scif5: serial@e6ee8000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
@@ -464,7 +464,7 @@
hscif0: serial@e62c0000 {
compatible = "renesas,hscif-r8a7794", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
@@ -476,7 +476,7 @@
hscif1: serial@e62c8000 {
compatible = "renesas,hscif-r8a7794", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
@@ -488,7 +488,7 @@
hscif2: serial@e62d0000 {
compatible = "renesas,hscif-r8a7794", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
- interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
@@ -500,7 +500,7 @@
ether: ethernet@ee700000 {
compatible = "renesas,ether-r8a7794";
reg = <0 0xee700000 0 0x400>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -513,7 +513,7 @@
i2c0: i2c@e6508000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6508000 0 0x40>;
- interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -525,7 +525,7 @@
i2c1: i2c@e6518000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6518000 0 0x40>;
- interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -537,7 +537,7 @@
i2c2: i2c@e6530000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6530000 0 0x40>;
- interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -549,7 +549,7 @@
i2c3: i2c@e6540000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6540000 0 0x40>;
- interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -561,7 +561,7 @@
i2c4: i2c@e6520000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6520000 0 0x40>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -573,7 +573,7 @@
i2c5: i2c@e6528000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6528000 0 0x40>;
- interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -585,7 +585,7 @@
mmcif0: mmc@ee200000 {
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
@@ -597,7 +597,7 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee100000 0 0x200>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -606,7 +606,7 @@
sdhi1: sd@ee140000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee140000 0 0x100>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -615,7 +615,7 @@
sdhi2: sd@ee160000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee160000 0 0x100>;
- interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -624,7 +624,7 @@
qspi: spi@e6b10000 {
compatible = "renesas,qspi-r8a7794", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
@@ -638,7 +638,7 @@
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7794";
reg = <0 0xe6ef0000 0 0x1000>;
- interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -647,7 +647,7 @@
vin1: video@e6ef1000 {
compatible = "renesas,vin-r8a7794";
reg = <0 0xe6ef1000 0 0x1000>;
- interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -658,7 +658,7 @@
device_type = "pci";
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -669,9 +669,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb@0,1 {
reg = <0x800 0 0 0 0>;
@@ -693,7 +693,7 @@
device_type = "pci";
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -704,9 +704,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb@0,1 {
reg = <0x800 0 0 0 0>;
@@ -726,7 +726,7 @@
hsusb: usb@e6590000 {
compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
power-domains = <&cpg_clocks>;
renesas,buswait = <4>;
@@ -759,8 +759,8 @@
compatible = "renesas,du-r8a7794";
reg = <0 0xfeb00000 0 0x40000>;
reg-names = "du";
- interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
- <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
<&mstp7_clks R8A7794_CLK_DU0>;
clock-names = "du.0", "du.1";
@@ -1111,8 +1111,8 @@
ipmmu_sy0: mmu@e6280000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
- interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1120,7 +1120,7 @@
ipmmu_sy1: mmu@e6290000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1128,8 +1128,8 @@
ipmmu_ds: mmu@e6740000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1137,7 +1137,7 @@
ipmmu_mp: mmu@ec680000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
- interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1145,8 +1145,8 @@
ipmmu_mx: mmu@fe951000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1154,8 +1154,8 @@
ipmmu_gp: mmu@e62a0000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
- interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
- <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 15/70] ARM: dts: r8a7794: use GIC_* defines
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7794 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7794.dtsi | 234 ++++++++++++++++++++---------------------
1 file changed, 117 insertions(+), 117 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index f8cd3a0beebf..21be4bdc4001 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -59,13 +59,13 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
gpio0: gpio at e6050000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6050000 0 0x50>;
- interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -78,7 +78,7 @@
gpio1: gpio at e6051000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6051000 0 0x50>;
- interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 26>;
@@ -91,7 +91,7 @@
gpio2: gpio at e6052000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6052000 0 0x50>;
- interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -104,7 +104,7 @@
gpio3: gpio at e6053000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6053000 0 0x50>;
- interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -117,7 +117,7 @@
gpio4: gpio at e6054000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6054000 0 0x50>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -130,7 +130,7 @@
gpio5: gpio at e6055000 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6055000 0 0x50>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 28>;
@@ -143,7 +143,7 @@
gpio6: gpio at e6055400 {
compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
reg = <0 0xe6055400 0 0x50>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 26>;
@@ -156,8 +156,8 @@
cmt0: timer at ffca0000 {
compatible = "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
- <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7794_CLK_CMT0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -170,14 +170,14 @@
cmt1: timer at e6130000 {
compatible = "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>,
- <0 122 IRQ_TYPE_LEVEL_HIGH>,
- <0 123 IRQ_TYPE_LEVEL_HIGH>,
- <0 124 IRQ_TYPE_LEVEL_HIGH>,
- <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 126 IRQ_TYPE_LEVEL_HIGH>,
- <0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_CMT1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -189,10 +189,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
irqc0: interrupt-controller at e61c0000 {
@@ -200,16 +200,16 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
power-domains = <&cpg_clocks>;
};
@@ -222,22 +222,22 @@
dmac0: dma-controller at e6700000 {
compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
- interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -253,22 +253,22 @@
dmac1: dma-controller at e6720000 {
compatible = "renesas,dmac-r8a7794", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH
- 0 308 IRQ_TYPE_LEVEL_HIGH
- 0 309 IRQ_TYPE_LEVEL_HIGH
- 0 310 IRQ_TYPE_LEVEL_HIGH
- 0 311 IRQ_TYPE_LEVEL_HIGH
- 0 312 IRQ_TYPE_LEVEL_HIGH
- 0 313 IRQ_TYPE_LEVEL_HIGH
- 0 314 IRQ_TYPE_LEVEL_HIGH
- 0 315 IRQ_TYPE_LEVEL_HIGH
- 0 316 IRQ_TYPE_LEVEL_HIGH
- 0 317 IRQ_TYPE_LEVEL_HIGH
- 0 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -284,7 +284,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
@@ -296,7 +296,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
@@ -308,7 +308,7 @@
scifa2: serial at e6c60000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
@@ -320,7 +320,7 @@
scifa3: serial at e6c70000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
- interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
@@ -332,7 +332,7 @@
scifa4: serial at e6c78000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
- interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
@@ -344,7 +344,7 @@
scifa5: serial at e6c80000 {
compatible = "renesas,scifa-r8a7794", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "sci_ick";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
@@ -356,7 +356,7 @@
scifb0: serial at e6c20000 {
compatible = "renesas,scifb-r8a7794", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
@@ -368,7 +368,7 @@
scifb1: serial at e6c30000 {
compatible = "renesas,scifb-r8a7794", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
@@ -380,7 +380,7 @@
scifb2: serial at e6ce0000 {
compatible = "renesas,scifb-r8a7794", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
@@ -392,7 +392,7 @@
scif0: serial at e6e60000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
- interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
@@ -404,7 +404,7 @@
scif1: serial at e6e68000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
- interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
@@ -416,7 +416,7 @@
scif2: serial at e6e58000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6e58000 0 64>;
- interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
@@ -428,7 +428,7 @@
scif3: serial at e6ea8000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
- interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
clock-names = "sci_ick";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
@@ -440,7 +440,7 @@
scif4: serial at e6ee0000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
@@ -452,7 +452,7 @@
scif5: serial at e6ee8000 {
compatible = "renesas,scif-r8a7794", "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
clock-names = "sci_ick";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
@@ -464,7 +464,7 @@
hscif0: serial at e62c0000 {
compatible = "renesas,hscif-r8a7794", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
- interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
clock-names = "sci_ick";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
@@ -476,7 +476,7 @@
hscif1: serial at e62c8000 {
compatible = "renesas,hscif-r8a7794", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
- interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
clock-names = "sci_ick";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
@@ -488,7 +488,7 @@
hscif2: serial at e62d0000 {
compatible = "renesas,hscif-r8a7794", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
- interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
clock-names = "sci_ick";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
@@ -500,7 +500,7 @@
ether: ethernet at ee700000 {
compatible = "renesas,ether-r8a7794";
reg = <0 0xee700000 0 0x400>;
- interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -513,7 +513,7 @@
i2c0: i2c at e6508000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6508000 0 0x40>;
- interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C0>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -525,7 +525,7 @@
i2c1: i2c at e6518000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6518000 0 0x40>;
- interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C1>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -537,7 +537,7 @@
i2c2: i2c at e6530000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6530000 0 0x40>;
- interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C2>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -549,7 +549,7 @@
i2c3: i2c at e6540000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6540000 0 0x40>;
- interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C3>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -561,7 +561,7 @@
i2c4: i2c at e6520000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6520000 0 0x40>;
- interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C4>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -573,7 +573,7 @@
i2c5: i2c at e6528000 {
compatible = "renesas,i2c-r8a7794";
reg = <0 0xe6528000 0 0x40>;
- interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_I2C5>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -585,7 +585,7 @@
mmcif0: mmc at ee200000 {
compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
dma-names = "tx", "rx";
@@ -597,7 +597,7 @@
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee100000 0 0x200>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -606,7 +606,7 @@
sdhi1: sd at ee140000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee140000 0 0x100>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -615,7 +615,7 @@
sdhi2: sd at ee160000 {
compatible = "renesas,sdhi-r8a7794";
reg = <0 0xee160000 0 0x100>;
- interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -624,7 +624,7 @@
qspi: spi at e6b10000 {
compatible = "renesas,qspi-r8a7794", "renesas,qspi";
reg = <0 0xe6b10000 0 0x2c>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
dma-names = "tx", "rx";
@@ -638,7 +638,7 @@
vin0: video at e6ef0000 {
compatible = "renesas,vin-r8a7794";
reg = <0 0xe6ef0000 0 0x1000>;
- interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -647,7 +647,7 @@
vin1: video at e6ef1000 {
compatible = "renesas,vin-r8a7794";
reg = <0 0xe6ef1000 0 0x1000>;
- interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_VIN1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -658,7 +658,7 @@
device_type = "pci";
reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -669,9 +669,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
usb at 0,1 {
reg = <0x800 0 0 0 0>;
@@ -693,7 +693,7 @@
device_type = "pci";
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
- interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_EHCI>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -704,9 +704,9 @@
#interrupt-cells = <1>;
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
- interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
- 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
+ 0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
usb at 0,1 {
reg = <0x800 0 0 0 0>;
@@ -726,7 +726,7 @@
hsusb: usb at e6590000 {
compatible = "renesas,usbhs-r8a7794", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSUSB>;
power-domains = <&cpg_clocks>;
renesas,buswait = <4>;
@@ -759,8 +759,8 @@
compatible = "renesas,du-r8a7794";
reg = <0 0xfeb00000 0 0x40000>;
reg-names = "du";
- interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
- <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
<&mstp7_clks R8A7794_CLK_DU0>;
clock-names = "du.0", "du.1";
@@ -1111,8 +1111,8 @@
ipmmu_sy0: mmu at e6280000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6280000 0 0x1000>;
- interrupts = <0 223 IRQ_TYPE_LEVEL_HIGH>,
- <0 224 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1120,7 +1120,7 @@
ipmmu_sy1: mmu at e6290000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6290000 0 0x1000>;
- interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1128,8 +1128,8 @@
ipmmu_ds: mmu at e6740000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe6740000 0 0x1000>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1137,7 +1137,7 @@
ipmmu_mp: mmu at ec680000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xec680000 0 0x1000>;
- interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1145,8 +1145,8 @@
ipmmu_mx: mmu at fe951000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
- interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
@@ -1154,8 +1154,8 @@
ipmmu_gp: mmu at e62a0000 {
compatible = "renesas,ipmmu-r8a7794", "renesas,ipmmu-vmsa";
reg = <0 0xe62a0000 0 0x1000>;
- interrupts = <0 260 IRQ_TYPE_LEVEL_HIGH>,
- <0 261 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <1>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 16/70] ARM: dts: r8a7793: gose: Add HDMI video out support
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Magnus Damm, Simon Horman
From: Magnus Damm <damm+renesas@opensource.se>
This patch adds r8a7793 GOSE HDMI video out support.
The r8a7793 GOSE board is similar to r8a7791 Koelsch. For those
boards an on-board HDMI encoder chip provides HDMI video out
and also a LVDS port is available for external LCD panels.
Tested on r8a7793 Gose with HDMI hooked up to a Toshiba TV.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: rebased; reused existing i2c2 node]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 85 ++++++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 987ed03b1e02..0b4cc8d99390 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -129,6 +129,54 @@
label = "LED8";
};
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ x2_clk: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ x13_clk: x13-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+ <&mstp7_clks R8A7793_CLK_DU1>,
+ <&mstp7_clks R8A7793_CLK_LVDS0>,
+ <&x13_clk>, <&x2_clk>;
+ clock-names = "du.0", "du.1", "lvds.0",
+ "dclkin.0", "dclkin.1";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
};
&extal_clk {
@@ -141,6 +189,11 @@
renesas,function = "i2c2";
};
+ du_pins: du {
+ renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ renesas,function = "du";
+ };
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
@@ -247,6 +300,38 @@
status = "okay";
clock-frequency = <100000>;
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
eeprom@50 {
compatible = "renesas,r1ex24002", "atmel,24c02";
reg = <0x50>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 16/70] ARM: dts: r8a7793: gose: Add HDMI video out support
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Magnus Damm <damm+renesas@opensource.se>
This patch adds r8a7793 GOSE HDMI video out support.
The r8a7793 GOSE board is similar to r8a7791 Koelsch. For those
boards an on-board HDMI encoder chip provides HDMI video out
and also a LVDS port is available for external LCD panels.
Tested on r8a7793 Gose with HDMI hooked up to a Toshiba TV.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
[simon: rebased; reused existing i2c2 node]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 85 ++++++++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 987ed03b1e02..0b4cc8d99390 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -129,6 +129,54 @@
label = "LED8";
};
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ x2_clk: x2-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+
+ x13_clk: x13-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+ <&mstp7_clks R8A7793_CLK_DU1>,
+ <&mstp7_clks R8A7793_CLK_LVDS0>,
+ <&x13_clk>, <&x2_clk>;
+ clock-names = "du.0", "du.1", "lvds.0",
+ "dclkin.0", "dclkin.1";
+
+ ports {
+ port at 0 {
+ endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ port at 1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
};
&extal_clk {
@@ -141,6 +189,11 @@
renesas,function = "i2c2";
};
+ du_pins: du {
+ renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ renesas,function = "du";
+ };
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
@@ -247,6 +300,38 @@
status = "okay";
clock-frequency = <100000>;
+ hdmi at 39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+
eeprom at 50 {
compatible = "renesas,r1ex24002", "atmel,24c02";
reg = <0x50>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 17/70] ARM: dts: r8a7778: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (15 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 18/70] ARM: dts: r8a7779: " Simon Horman
` (53 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7778 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7778.dtsi | 87 +++++++++++++++++++++---------------------
1 file changed, 44 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 791aafd310a5..fc5e7243467a 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -17,6 +17,7 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/r8a7778-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -51,7 +52,7 @@
ether: ethernet at fde00000 {
compatible = "renesas,ether-r8a7778";
reg = <0xfde00000 0x400>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7778_CLK_ETHER>;
power-domains = <&cpg_clocks>;
phy-mode = "rmii";
@@ -79,17 +80,17 @@
<0xfe780024 4>,
<0xfe780044 4>,
<0xfe780064 4>;
- interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
- 0 28 IRQ_TYPE_LEVEL_HIGH
- 0 29 IRQ_TYPE_LEVEL_HIGH
- 0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
gpio0: gpio at ffc40000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -100,7 +101,7 @@
gpio1: gpio at ffc41000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
@@ -111,7 +112,7 @@
gpio2: gpio at ffc42000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -122,7 +123,7 @@
gpio3: gpio at ffc43000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -133,7 +134,7 @@
gpio4: gpio at ffc44000 {
compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 27>;
@@ -151,7 +152,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc70000 0x1000>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -162,7 +163,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc71000 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -173,7 +174,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc72000 0x1000>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -184,7 +185,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7778";
reg = <0xffc73000 0x1000>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_I2C3>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -193,9 +194,9 @@
tmu0: timer at ffd80000 {
compatible = "renesas,tmu-r8a7778", "renesas,tmu";
reg = <0xffd80000 0x30>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -208,9 +209,9 @@
tmu1: timer at ffd81000 {
compatible = "renesas,tmu-r8a7778", "renesas,tmu";
reg = <0xffd81000 0x30>;
- interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -223,9 +224,9 @@
tmu2: timer at ffd82000 {
compatible = "renesas,tmu-r8a7778", "renesas,tmu";
reg = <0xffd82000 0x30>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_TMU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -285,20 +286,20 @@
};
rcar_sound,ssi {
- ssi3: ssi at 3 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi4: ssi at 4 { interrupts = <0 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi5: ssi at 5 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi6: ssi at 6 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi7: ssi at 7 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi8: ssi at 8 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi9: ssi at 9 { interrupts = <0 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi3: ssi at 3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi at 4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi at 5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi at 6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi at 7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi at 8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi at 9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
};
};
scif0: serial at ffe40000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe40000 0x100>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -308,7 +309,7 @@
scif1: serial at ffe41000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe41000 0x100>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -318,7 +319,7 @@
scif2: serial at ffe42000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe42000 0x100>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -328,7 +329,7 @@
scif3: serial at ffe43000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe43000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -338,7 +339,7 @@
scif4: serial at ffe44000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe44000 0x100>;
- interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -348,7 +349,7 @@
scif5: serial at ffe45000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe45000 0x100>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -358,7 +359,7 @@
mmcif: mmc at ffe4e000 {
compatible = "renesas,sh-mmcif";
reg = <0xffe4e000 0x100>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_MMC>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -367,7 +368,7 @@
sdhi0: sd at ffe4c000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
- interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -376,7 +377,7 @@
sdhi1: sd at ffe4d000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4d000 0x100>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -385,7 +386,7 @@
sdhi2: sd at ffe4f000 {
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4f000 0x100>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7778_CLK_SDHI2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -394,7 +395,7 @@
hspi0: spi at fffc7000 {
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -405,7 +406,7 @@
hspi1: spi at fffc8000 {
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
@@ -416,7 +417,7 @@
hspi2: spi at fffc6000 {
compatible = "renesas,hspi-r8a7778", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 18/70] ARM: dts: r8a7779: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (16 preceding siblings ...)
2016-02-04 14:29 ` [PATCH 17/70] ARM: dts: r8a7778: use GIC_* defines Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (52 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7779 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a7779.dtsi | 78 +++++++++++++++++++++---------------------
1 file changed, 39 insertions(+), 39 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 6afa909865b5..93f3fdf95e31 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -74,7 +74,7 @@
gpio0: gpio at ffc40000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc40000 0x2c>;
- interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
@@ -85,7 +85,7 @@
gpio1: gpio at ffc41000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc41000 0x2c>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
@@ -96,7 +96,7 @@
gpio2: gpio at ffc42000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc42000 0x2c>;
- interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
@@ -107,7 +107,7 @@
gpio3: gpio at ffc43000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc43000 0x2c>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
@@ -118,7 +118,7 @@
gpio4: gpio at ffc44000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc44000 0x2c>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 128 32>;
@@ -129,7 +129,7 @@
gpio5: gpio at ffc45000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc45000 0x2c>;
- interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 160 32>;
@@ -140,7 +140,7 @@
gpio6: gpio at ffc46000 {
compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
reg = <0xffc46000 0x2c>;
- interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
#gpio-cells = <2>;
gpio-controller;
gpio-ranges = <&pfc 0 192 9>;
@@ -159,10 +159,10 @@
<0xfe780044 4>,
<0xfe780064 4>,
<0xfe780000 4>;
- interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH
- 0 28 IRQ_TYPE_LEVEL_HIGH
- 0 29 IRQ_TYPE_LEVEL_HIGH
- 0 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
sense-bitfield-width = <2>;
};
@@ -171,7 +171,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc70000 0x1000>;
- interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -182,7 +182,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc71000 0x1000>;
- interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -193,7 +193,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc72000 0x1000>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -204,7 +204,7 @@
#size-cells = <0>;
compatible = "renesas,i2c-r8a7779";
reg = <0xffc73000 0x1000>;
- interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_I2C3>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -213,7 +213,7 @@
scif0: serial at ffe40000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe40000 0x100>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -223,7 +223,7 @@
scif1: serial at ffe41000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe41000 0x100>;
- interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -233,7 +233,7 @@
scif2: serial at ffe42000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe42000 0x100>;
- interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -243,7 +243,7 @@
scif3: serial at ffe43000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe43000 0x100>;
- interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -253,7 +253,7 @@
scif4: serial at ffe44000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe44000 0x100>;
- interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -263,7 +263,7 @@
scif5: serial at ffe45000 {
compatible = "renesas,scif-r8a7779", "renesas,scif";
reg = <0xffe45000 0x100>;
- interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -283,9 +283,9 @@
tmu0: timer at ffd80000 {
compatible = "renesas,tmu-r8a7779", "renesas,tmu";
reg = <0xffd80000 0x30>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU0>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -298,9 +298,9 @@
tmu1: timer at ffd81000 {
compatible = "renesas,tmu-r8a7779", "renesas,tmu";
reg = <0xffd81000 0x30>;
- interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU1>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -313,9 +313,9 @@
tmu2: timer at ffd82000 {
compatible = "renesas,tmu-r8a7779", "renesas,tmu";
reg = <0xffd82000 0x30>;
- interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_TMU2>;
clock-names = "fck";
power-domains = <&cpg_clocks>;
@@ -328,7 +328,7 @@
sata: sata at fc600000 {
compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
- interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
power-domains = <&cpg_clocks>;
};
@@ -336,7 +336,7 @@
sdhi0: sd at ffe4c000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4c000 0x100>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -345,7 +345,7 @@
sdhi1: sd at ffe4d000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4d000 0x100>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -354,7 +354,7 @@
sdhi2: sd at ffe4e000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4e000 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -363,7 +363,7 @@
sdhi3: sd at ffe4f000 {
compatible = "renesas,sdhi-r8a7779";
reg = <0xffe4f000 0x100>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
power-domains = <&cpg_clocks>;
status = "disabled";
@@ -372,7 +372,7 @@
hspi0: spi at fffc7000 {
compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc7000 0x18>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
@@ -383,7 +383,7 @@
hspi1: spi at fffc8000 {
compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc8000 0x18>;
- interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
@@ -394,7 +394,7 @@
hspi2: spi at fffc6000 {
compatible = "renesas,hspi-r8a7779", "renesas,hspi";
reg = <0xfffc6000 0x18>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mstp0_clks R8A7779_CLK_HSPI>;
@@ -405,7 +405,7 @@
du: display at fff80000 {
compatible = "renesas,du-r8a7779";
reg = <0 0xfff80000 0 0x40000>;
- interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_DU>;
power-domains = <&cpg_clocks>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 19/70] ARM: dts: porter: add sound support
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the Porter board dependent part of the R8A7791 sound device node.
Add device node for Asahi Kasei AK4642 stereo codec to the I2C2 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device and the codec.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-porter.dts | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fe81fa0e478c..5015eaa0ae50 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -8,6 +8,17 @@
* kind, whether express or implied.
*/
+/*
+ * SSI-AK4642
+ *
+ * SW3: 1: AK4642
+ * 3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ * amixer set "LINEOUT Mixer DACL" on
+ */
+
/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -101,6 +112,30 @@
#clock-cells = <0>;
clock-frequency = <74250000>;
};
+
+ x14_clk: x14-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&soundcodec>;
+ simple-audio-card,frame-master = <&soundcodec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ soundcodec: simple-audio-card,codec {
+ sound-dai = <&ak4642>;
+ clocks = <&x14_clk>;
+ };
+ };
};
&extal_clk {
@@ -167,6 +202,16 @@
renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
renesas,function = "du";
};
+
+ ssi_pins: sound {
+ renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ renesas,function = "ssi";
+ };
+
+ audio_clk_pins: audio_clk {
+ renesas,groups = "audio_clk_a";
+ renesas,function = "audio_clk";
+ };
};
&scif0 {
@@ -257,6 +302,12 @@
status = "okay";
clock-frequency = <400000>;
+ ak4642: codec@12 {
+ compatible = "asahi-kasei,ak4642";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
@@ -385,3 +436,23 @@
};
};
};
+
+&rcar_sound {
+ pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0>;
+ capture = <&ssi1>;
+ };
+ };
+};
+
+&ssi1 {
+ shared-pin;
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 19/70] ARM: dts: porter: add sound support
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the Porter board dependent part of the R8A7791 sound device node.
Add device node for Asahi Kasei AK4642 stereo codec to the I2C2 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device and the codec.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-porter.dts | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fe81fa0e478c..5015eaa0ae50 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -8,6 +8,17 @@
* kind, whether express or implied.
*/
+/*
+ * SSI-AK4642
+ *
+ * SW3: 1: AK4642
+ * 3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ * amixer set "LINEOUT Mixer DACL" on
+ */
+
/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -101,6 +112,30 @@
#clock-cells = <0>;
clock-frequency = <74250000>;
};
+
+ x14_clk: x14-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&soundcodec>;
+ simple-audio-card,frame-master = <&soundcodec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ soundcodec: simple-audio-card,codec {
+ sound-dai = <&ak4642>;
+ clocks = <&x14_clk>;
+ };
+ };
};
&extal_clk {
@@ -167,6 +202,16 @@
renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
renesas,function = "du";
};
+
+ ssi_pins: sound {
+ renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ renesas,function = "ssi";
+ };
+
+ audio_clk_pins: audio_clk {
+ renesas,groups = "audio_clk_a";
+ renesas,function = "audio_clk";
+ };
};
&scif0 {
@@ -257,6 +302,12 @@
status = "okay";
clock-frequency = <400000>;
+ ak4642: codec at 12 {
+ compatible = "asahi-kasei,ak4642";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
composite-in at 20 {
compatible = "adi,adv7180";
reg = <0x20>;
@@ -385,3 +436,23 @@
};
};
};
+
+&rcar_sound {
+ pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0>;
+ capture = <&ssi1>;
+ };
+ };
+};
+
+&ssi1 {
+ shared-pin;
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 20/70] ARM: dts: r8a73a4: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (18 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (50 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a73a4 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r8a73a4.dtsi | 212 ++++++++++++++++++++---------------------
1 file changed, 106 insertions(+), 106 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index cb4f7b2798fe..64f3efcd7ba5 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -39,10 +39,10 @@
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
dbsc1: memory-controller at e6790000 {
@@ -69,27 +69,27 @@
dma0: dma-controller at e6700020 {
compatible = "renesas,shdma-r8a73a4";
reg = <0 0xe6700020 0 0x89e0>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH
- 0 215 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -106,7 +106,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe60b0000 0 0x428>;
- interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IIC5>;
power-domains = <&pd_a3sp>;
@@ -116,7 +116,7 @@
cmt1: timer at e6130000 {
compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
reg = <0 0xe6130000 0 0x1004>;
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
@@ -131,38 +131,38 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
- interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
- <0 1 IRQ_TYPE_LEVEL_HIGH>,
- <0 2 IRQ_TYPE_LEVEL_HIGH>,
- <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 4 IRQ_TYPE_LEVEL_HIGH>,
- <0 5 IRQ_TYPE_LEVEL_HIGH>,
- <0 6 IRQ_TYPE_LEVEL_HIGH>,
- <0 7 IRQ_TYPE_LEVEL_HIGH>,
- <0 8 IRQ_TYPE_LEVEL_HIGH>,
- <0 9 IRQ_TYPE_LEVEL_HIGH>,
- <0 10 IRQ_TYPE_LEVEL_HIGH>,
- <0 11 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>,
- <0 13 IRQ_TYPE_LEVEL_HIGH>,
- <0 14 IRQ_TYPE_LEVEL_HIGH>,
- <0 15 IRQ_TYPE_LEVEL_HIGH>,
- <0 16 IRQ_TYPE_LEVEL_HIGH>,
- <0 17 IRQ_TYPE_LEVEL_HIGH>,
- <0 18 IRQ_TYPE_LEVEL_HIGH>,
- <0 19 IRQ_TYPE_LEVEL_HIGH>,
- <0 20 IRQ_TYPE_LEVEL_HIGH>,
- <0 21 IRQ_TYPE_LEVEL_HIGH>,
- <0 22 IRQ_TYPE_LEVEL_HIGH>,
- <0 23 IRQ_TYPE_LEVEL_HIGH>,
- <0 24 IRQ_TYPE_LEVEL_HIGH>,
- <0 25 IRQ_TYPE_LEVEL_HIGH>,
- <0 26 IRQ_TYPE_LEVEL_HIGH>,
- <0 27 IRQ_TYPE_LEVEL_HIGH>,
- <0 28 IRQ_TYPE_LEVEL_HIGH>,
- <0 29 IRQ_TYPE_LEVEL_HIGH>,
- <0 30 IRQ_TYPE_LEVEL_HIGH>,
- <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
power-domains = <&pd_c4>;
};
@@ -172,32 +172,32 @@
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
- <0 33 IRQ_TYPE_LEVEL_HIGH>,
- <0 34 IRQ_TYPE_LEVEL_HIGH>,
- <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>,
- <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>,
- <0 39 IRQ_TYPE_LEVEL_HIGH>,
- <0 40 IRQ_TYPE_LEVEL_HIGH>,
- <0 41 IRQ_TYPE_LEVEL_HIGH>,
- <0 42 IRQ_TYPE_LEVEL_HIGH>,
- <0 43 IRQ_TYPE_LEVEL_HIGH>,
- <0 44 IRQ_TYPE_LEVEL_HIGH>,
- <0 45 IRQ_TYPE_LEVEL_HIGH>,
- <0 46 IRQ_TYPE_LEVEL_HIGH>,
- <0 47 IRQ_TYPE_LEVEL_HIGH>,
- <0 48 IRQ_TYPE_LEVEL_HIGH>,
- <0 49 IRQ_TYPE_LEVEL_HIGH>,
- <0 50 IRQ_TYPE_LEVEL_HIGH>,
- <0 51 IRQ_TYPE_LEVEL_HIGH>,
- <0 52 IRQ_TYPE_LEVEL_HIGH>,
- <0 53 IRQ_TYPE_LEVEL_HIGH>,
- <0 54 IRQ_TYPE_LEVEL_HIGH>,
- <0 55 IRQ_TYPE_LEVEL_HIGH>,
- <0 56 IRQ_TYPE_LEVEL_HIGH>,
- <0 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
power-domains = <&pd_c4>;
};
@@ -237,7 +237,7 @@
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
power-domains = <&pd_c5>;
};
@@ -247,7 +247,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
- interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC0>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -258,7 +258,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
- interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -269,7 +269,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
- interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC2>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -280,7 +280,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
- interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IIC3>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -291,7 +291,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
- interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A73A4_CLK_IIC4>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -302,7 +302,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
- interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC6>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -313,7 +313,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
- interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_IIC7>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -324,7 +324,7 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A73A4_CLK_IIC8>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -333,7 +333,7 @@
scifb0: serial at e6c20000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6c20000 0 0x100>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -343,7 +343,7 @@
scifb1: serial at e6c30000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6c30000 0 0x100>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -353,7 +353,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c40000 0 0x100>;
- interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -363,7 +363,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c50000 0 0x100>;
- interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -373,7 +373,7 @@
scifb2: serial at e6ce0000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
- interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -383,7 +383,7 @@
scifb3: serial at e6cf0000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6cf0000 0 0x100>;
- interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
clock-names = "sci_ick";
power-domains = <&pd_c4>;
@@ -393,7 +393,7 @@
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -403,7 +403,7 @@
sdhi1: sd at ee120000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee120000 0 0x100>;
- interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -413,7 +413,7 @@
sdhi2: sd at ee140000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee140000 0 0x100>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -423,7 +423,7 @@
mmcif0: mmc at ee200000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_MMCIF0>;
power-domains = <&pd_a3sp>;
reg-io-width = <4>;
@@ -433,7 +433,7 @@
mmcif1: mmc at ee220000 {
compatible = "renesas,sh-mmcif";
reg = <0 0xee220000 0 0x80>;
- interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A73A4_CLK_MMCIF1>;
power-domains = <&pd_a3sp>;
reg-io-width = <4>;
@@ -449,7 +449,7 @@
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
bsc: bus at fec10000 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 21/70] ARM: dts: r8a7740: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use GIC_* defines for GIC interrupt cells in r8a7740 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 143 +++++++++++++++++++++--------------------
1 file changed, 72 insertions(+), 71 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 6ef954766eef..36bcb39cca03 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -11,6 +11,7 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/r8a7740-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -41,7 +42,7 @@
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_a3sm>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
@@ -58,7 +59,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
};
ptm {
@@ -69,7 +70,7 @@
cmt1: timer@e6138000 {
compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
reg = <0xe6138000 0x170>;
- interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
@@ -89,14 +90,14 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -111,14 +112,14 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -133,14 +134,14 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -155,14 +156,14 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -171,7 +172,7 @@
compatible = "renesas,gether-r8a7740";
reg = <0xe9a00000 0x800>,
<0xe9a01800 0x800>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
power-domains = <&pd_a4s>;
phy-mode = "mii";
@@ -185,10 +186,10 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xfff20000 0x425>;
- interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
power-domains = <&pd_a4r>;
status = "disabled";
@@ -199,10 +200,10 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xe6c20000 0x425>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
- 0 71 IRQ_TYPE_LEVEL_HIGH
- 0 72 IRQ_TYPE_LEVEL_HIGH
- 0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -211,7 +212,7 @@
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c40000 0x100>;
- interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -221,7 +222,7 @@
scifa1: serial@e6c50000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c50000 0x100>;
- interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -231,7 +232,7 @@
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
- interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -241,7 +242,7 @@
scifa3: serial@e6c70000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c70000 0x100>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -251,7 +252,7 @@
scifa4: serial@e6c80000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c80000 0x100>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -261,7 +262,7 @@
scifa5: serial@e6cb0000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -271,7 +272,7 @@
scifa6: serial@e6cc0000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -281,7 +282,7 @@
scifa7: serial@e6cd0000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -291,7 +292,7 @@
scifb: serial@e6c30000 {
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -329,8 +330,8 @@
mmcif0: mmc@e6bd0000 {
compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
- 0 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -339,9 +340,9 @@
sdhi0: sd@e6850000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6850000 0x100>;
- interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
- 0 118 IRQ_TYPE_LEVEL_HIGH
- 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -352,9 +353,9 @@
sdhi1: sd@e6860000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6860000 0x100>;
- interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
- 0 122 IRQ_TYPE_LEVEL_HIGH
- 0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -365,9 +366,9 @@
sdhi2: sd@e6870000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6870000 0x100>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
- 0 126 IRQ_TYPE_LEVEL_HIGH
- 0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -379,7 +380,7 @@
#sound-dai-cells = <1>;
compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
reg = <0xfe1f0000 0x400>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 0x4>;
clocks = <&mstp3_clks R8A7740_CLK_FSI>;
power-domains = <&pd_a4mp>;
status = "disabled";
@@ -388,9 +389,9 @@
tmu0: timer@fff80000 {
compatible = "renesas,tmu-r8a7740", "renesas,tmu";
reg = <0xfff80000 0x2c>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>,
- <0 200 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
clock-names = "fck";
power-domains = <&pd_a4r>;
@@ -403,9 +404,9 @@
tmu1: timer@fff90000 {
compatible = "renesas,tmu-r8a7740", "renesas,tmu";
reg = <0xfff90000 0x2c>;
- interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
clock-names = "fck";
power-domains = <&pd_a4r>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 21/70] ARM: dts: r8a7740: use GIC_* defines
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r8a7740 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 143 +++++++++++++++++++++--------------------
1 file changed, 72 insertions(+), 71 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 6ef954766eef..36bcb39cca03 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -11,6 +11,7 @@
/include/ "skeleton.dtsi"
#include <dt-bindings/clock/r8a7740-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -41,7 +42,7 @@
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
- interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_a3sm>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
@@ -58,7 +59,7 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
};
ptm {
@@ -69,7 +70,7 @@
cmt1: timer at e6138000 {
compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
reg = <0xe6138000 0x170>;
- interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
@@ -89,14 +90,14 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -111,14 +112,14 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -133,14 +134,14 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -155,14 +156,14 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH
- 0 149 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
power-domains = <&pd_a4s>;
};
@@ -171,7 +172,7 @@
compatible = "renesas,gether-r8a7740";
reg = <0xe9a00000 0x800>,
<0xe9a01800 0x800>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_GETHER>;
power-domains = <&pd_a4s>;
phy-mode = "mii";
@@ -185,10 +186,10 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xfff20000 0x425>;
- interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_IIC0>;
power-domains = <&pd_a4r>;
status = "disabled";
@@ -199,10 +200,10 @@
#size-cells = <0>;
compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic";
reg = <0xe6c20000 0x425>;
- interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH
- 0 71 IRQ_TYPE_LEVEL_HIGH
- 0 72 IRQ_TYPE_LEVEL_HIGH
- 0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -211,7 +212,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c40000 0x100>;
- interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -221,7 +222,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c50000 0x100>;
- interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -231,7 +232,7 @@
scifa2: serial at e6c60000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
- interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -241,7 +242,7 @@
scifa3: serial at e6c70000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c70000 0x100>;
- interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -251,7 +252,7 @@
scifa4: serial at e6c80000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c80000 0x100>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -261,7 +262,7 @@
scifa5: serial at e6cb0000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
- interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -271,7 +272,7 @@
scifa6: serial at e6cc0000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
- interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -281,7 +282,7 @@
scifa7: serial at e6cd0000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -291,7 +292,7 @@
scifb: serial at e6c30000 {
compatible = "renesas,scifb-r8a7740", "renesas,scifb";
reg = <0xe6c30000 0x100>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -329,8 +330,8 @@
mmcif0: mmc at e6bd0000 {
compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH
- 0 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_MMC>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -339,9 +340,9 @@
sdhi0: sd at e6850000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6850000 0x100>;
- interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH
- 0 118 IRQ_TYPE_LEVEL_HIGH
- 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -352,9 +353,9 @@
sdhi1: sd at e6860000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6860000 0x100>;
- interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH
- 0 122 IRQ_TYPE_LEVEL_HIGH
- 0 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7740_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -365,9 +366,9 @@
sdhi2: sd at e6870000 {
compatible = "renesas,sdhi-r8a7740";
reg = <0xe6870000 0x100>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH
- 0 126 IRQ_TYPE_LEVEL_HIGH
- 0 127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R8A7740_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -379,7 +380,7 @@
#sound-dai-cells = <1>;
compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2";
reg = <0xfe1f0000 0x400>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 0x4>;
clocks = <&mstp3_clks R8A7740_CLK_FSI>;
power-domains = <&pd_a4mp>;
status = "disabled";
@@ -388,9 +389,9 @@
tmu0: timer at fff80000 {
compatible = "renesas,tmu-r8a7740", "renesas,tmu";
reg = <0xfff80000 0x2c>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>,
- <0 200 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
clock-names = "fck";
power-domains = <&pd_a4r>;
@@ -403,9 +404,9 @@
tmu1: timer at fff90000 {
compatible = "renesas,tmu-r8a7740", "renesas,tmu";
reg = <0xfff90000 0x2c>;
- interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
clock-names = "fck";
power-domains = <&pd_a4r>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 22/70] ARM: dts: r8a7793: add MSTP10 clocks to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Instantiate MSTP10 clocks in r8a7793 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 36 +++++++++++++++++++++++++++++++
include/dt-bindings/clock/r8a7793-clock.h | 2 ++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index ea1196b99d52..c4459f147330 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -963,6 +963,42 @@
"qspi_mod", "i2c5", "i2c6", "i2c4",
"i2c3", "i2c2", "i2c1", "i2c0";
};
+ mstp10_clks: mstp10_clks@e6150998 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+ clocks = <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>;
+
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_SSI_ALL
+ R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5
+ R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0
+ R8A7793_CLK_SCU_ALL
+ R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0
+ R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0
+ R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5
+ R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0
+ >;
+ clock-output-names =
+ "ssi-all",
+ "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+ "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+ "scu-all",
+ "scu-dvc1", "scu-dvc0",
+ "scu-ctu1-mix1", "scu-ctu0-mix0",
+ "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+ "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+ };
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h
index 1579e07f96a3..efcbc594fe82 100644
--- a/include/dt-bindings/clock/r8a7793-clock.h
+++ b/include/dt-bindings/clock/r8a7793-clock.h
@@ -145,6 +145,8 @@
#define R8A7793_CLK_SCU_ALL 17
#define R8A7793_CLK_SCU_DVC1 18
#define R8A7793_CLK_SCU_DVC0 19
+#define R8A7793_CLK_SCU_CTU1_MIX1 20
+#define R8A7793_CLK_SCU_CTU0_MIX0 21
#define R8A7793_CLK_SCU_SRC9 22
#define R8A7793_CLK_SCU_SRC8 23
#define R8A7793_CLK_SCU_SRC7 24
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 22/70] ARM: dts: r8a7793: add MSTP10 clocks to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate MSTP10 clocks in r8a7793 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 36 +++++++++++++++++++++++++++++++
include/dt-bindings/clock/r8a7793-clock.h | 2 ++
2 files changed, 38 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index ea1196b99d52..c4459f147330 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -963,6 +963,42 @@
"qspi_mod", "i2c5", "i2c6", "i2c4",
"i2c3", "i2c2", "i2c1", "i2c0";
};
+ mstp10_clks: mstp10_clks at e6150998 {
+ compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
+ clocks = <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
+ <&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>;
+
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7793_CLK_SSI_ALL
+ R8A7793_CLK_SSI9 R8A7793_CLK_SSI8 R8A7793_CLK_SSI7 R8A7793_CLK_SSI6 R8A7793_CLK_SSI5
+ R8A7793_CLK_SSI4 R8A7793_CLK_SSI3 R8A7793_CLK_SSI2 R8A7793_CLK_SSI1 R8A7793_CLK_SSI0
+ R8A7793_CLK_SCU_ALL
+ R8A7793_CLK_SCU_DVC1 R8A7793_CLK_SCU_DVC0
+ R8A7793_CLK_SCU_CTU1_MIX1 R8A7793_CLK_SCU_CTU0_MIX0
+ R8A7793_CLK_SCU_SRC9 R8A7793_CLK_SCU_SRC8 R8A7793_CLK_SCU_SRC7 R8A7793_CLK_SCU_SRC6 R8A7793_CLK_SCU_SRC5
+ R8A7793_CLK_SCU_SRC4 R8A7793_CLK_SCU_SRC3 R8A7793_CLK_SCU_SRC2 R8A7793_CLK_SCU_SRC1 R8A7793_CLK_SCU_SRC0
+ >;
+ clock-output-names =
+ "ssi-all",
+ "ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
+ "ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
+ "scu-all",
+ "scu-dvc1", "scu-dvc0",
+ "scu-ctu1-mix1", "scu-ctu0-mix0",
+ "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
+ "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
+ };
mstp11_clks: mstp11_clks at e615099c {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>;
diff --git a/include/dt-bindings/clock/r8a7793-clock.h b/include/dt-bindings/clock/r8a7793-clock.h
index 1579e07f96a3..efcbc594fe82 100644
--- a/include/dt-bindings/clock/r8a7793-clock.h
+++ b/include/dt-bindings/clock/r8a7793-clock.h
@@ -145,6 +145,8 @@
#define R8A7793_CLK_SCU_ALL 17
#define R8A7793_CLK_SCU_DVC1 18
#define R8A7793_CLK_SCU_DVC0 19
+#define R8A7793_CLK_SCU_CTU1_MIX1 20
+#define R8A7793_CLK_SCU_CTU0_MIX0 21
#define R8A7793_CLK_SCU_SRC9 22
#define R8A7793_CLK_SCU_SRC8 23
#define R8A7793_CLK_SCU_SRC7 24
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 23/70] ARM: dts: r8a7793: add audio clock to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Instantiate audio clock in r8a7793 device tree.
audio_clk_a/b/c are required for R-Car sound.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c4459f147330..530fa9488a4a 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -706,6 +706,29 @@
clock-output-names = "extal";
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+ * default. Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_a";
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_b";
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_c";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7793-cpg-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 23/70] ARM: dts: r8a7793: add audio clock to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate audio clock in r8a7793 device tree.
audio_clk_a/b/c are required for R-Car sound.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c4459f147330..530fa9488a4a 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -706,6 +706,29 @@
clock-output-names = "extal";
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+ * default. Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_a";
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_b";
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_c";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks at e6150000 {
compatible = "renesas,r8a7793-cpg-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 24/70] ARM: dts: r8a7793: add m2 clock to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Declare m2 clock in r8a7793 device tree.
Based on similar work for the r8a7791 by Laurent Pinchart.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 530fa9488a4a..6aabba6ef92c 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -817,6 +817,14 @@
clock-mult = <1>;
clock-output-names = "p";
};
+ m2_clk: m2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "m2";
+ };
rclk_clk: rclk_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 24/70] ARM: dts: r8a7793: add m2 clock to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Declare m2 clock in r8a7793 device tree.
Based on similar work for the r8a7791 by Laurent Pinchart.
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 530fa9488a4a..6aabba6ef92c 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -817,6 +817,14 @@
clock-mult = <1>;
clock-output-names = "p";
};
+ m2_clk: m2_clk {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ clock-output-names = "m2";
+ };
rclk_clk: rclk_clk {
compatible = "fixed-factor-clock";
clocks = <&cpg_clocks R8A7793_CLK_PLL1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 25/70] ARM: dts: r8a7793: add R-Car sound support to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Instantiate R-Car sound node in r8a7793 device tree.
This only supports PIO transfers.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 83 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6aabba6ef92c..8b1ec47754ac 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1101,4 +1101,87 @@
#iommu-cells = <1>;
status = "disabled";
};
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>; /* SSI */
+ reg-names = "scu", "adg", "ssiu", "ssi";
+
+ clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
+ <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>,
+ <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>,
+ <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>,
+ <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6", "src.5",
+ "src.4", "src.3", "src.2", "src.1", "src.0",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&cpg_clocks>;
+
+ status = "disabled";
+
+ rcar_sound,src {
+ src0: src@0 { };
+ src1: src@1 { };
+ src2: src@2 { };
+ src3: src@3 { };
+ src4: src@4 { };
+ src5: src@5 { };
+ src6: src@6 { };
+ src7: src@7 { };
+ src8: src@8 { };
+ src9: src@9 { };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi@0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi1: ssi@1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi2: ssi@2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi3: ssi@3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi4: ssi@4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi5: ssi@5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi6: ssi@6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi7: ssi@7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi8: ssi@8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi9: ssi@9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 25/70] ARM: dts: r8a7793: add R-Car sound support to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate R-Car sound node in r8a7793 device tree.
This only supports PIO transfers.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 83 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6aabba6ef92c..8b1ec47754ac 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1101,4 +1101,87 @@
#iommu-cells = <1>;
status = "disabled";
};
+
+ rcar_sound: sound at ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7793", "renesas,rcar_sound-gen2";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>; /* SSI */
+ reg-names = "scu", "adg", "ssiu", "ssi";
+
+ clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+ <&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
+ <&mstp10_clks R8A7793_CLK_SSI7>, <&mstp10_clks R8A7793_CLK_SSI6>,
+ <&mstp10_clks R8A7793_CLK_SSI5>, <&mstp10_clks R8A7793_CLK_SSI4>,
+ <&mstp10_clks R8A7793_CLK_SSI3>, <&mstp10_clks R8A7793_CLK_SSI2>,
+ <&mstp10_clks R8A7793_CLK_SSI1>, <&mstp10_clks R8A7793_CLK_SSI0>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC9>, <&mstp10_clks R8A7793_CLK_SCU_SRC8>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC7>, <&mstp10_clks R8A7793_CLK_SCU_SRC6>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>,
+ <&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
+ "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6", "src.5",
+ "src.4", "src.3", "src.2", "src.1", "src.0",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&cpg_clocks>;
+
+ status = "disabled";
+
+ rcar_sound,src {
+ src0: src at 0 { };
+ src1: src at 1 { };
+ src2: src at 2 { };
+ src3: src at 3 { };
+ src4: src at 4 { };
+ src5: src at 5 { };
+ src6: src at 6 { };
+ src7: src at 7 { };
+ src8: src at 8 { };
+ src9: src at 9 { };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi at 0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi1: ssi at 1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi2: ssi at 2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi3: ssi at 3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi4: ssi at 4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi5: ssi at 5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi6: ssi at 6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi7: ssi at 7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi8: ssi at 8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ ssi9: ssi at 9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 26/70] ARM: dts: r8a7793: add DVC support to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (24 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (44 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Add DVC support to sound node in r8a7793 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 8b1ec47754ac..3531d30fe107 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1127,17 +1127,23 @@
<&mstp10_clks R8A7793_CLK_SCU_SRC5>, <&mstp10_clks R8A7793_CLK_SCU_SRC4>,
<&mstp10_clks R8A7793_CLK_SCU_SRC3>, <&mstp10_clks R8A7793_CLK_SCU_SRC2>,
<&mstp10_clks R8A7793_CLK_SCU_SRC1>, <&mstp10_clks R8A7793_CLK_SCU_SRC0>,
+ <&mstp10_clks R8A7793_CLK_SCU_DVC0>, <&mstp10_clks R8A7793_CLK_SCU_DVC1>,
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
clock-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
"src.9", "src.8", "src.7", "src.6", "src.5",
"src.4", "src.3", "src.2", "src.1", "src.0",
+ "dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&cpg_clocks>;
status = "disabled";
+ rcar_sound,dvc {
+ dvc0: dvc at 0 { };
+ dvc1: dvc at 1 { };
+ };
rcar_sound,src {
src0: src at 0 { };
src1: src at 1 { };
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 27/70] ARM: dts: r8a7793: add audio DMAC clocks to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Instantiate Audio DMA clocks in the r8a7791 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 3531d30fe107..cb6251e71ef9 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -924,10 +924,11 @@
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&extal_clk>;
+ clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7793_CLK_THERMAL>;
- clock-output-names = "thermal";
+ clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1
+ R8A7793_CLK_THERMAL>;
+ clock-output-names = "audmac0", "audmac1", "thermal";
};
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7793-mstp-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 27/70] ARM: dts: r8a7793: add audio DMAC clocks to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate Audio DMA clocks in the r8a7791 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 3531d30fe107..cb6251e71ef9 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -924,10 +924,11 @@
mstp5_clks: mstp5_clks at e6150144 {
compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&extal_clk>;
+ clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7793_CLK_THERMAL>;
- clock-output-names = "thermal";
+ clock-indices = <R8A7793_CLK_AUDIO_DMAC0 R8A7793_CLK_AUDIO_DMAC1
+ R8A7793_CLK_THERMAL>;
+ clock-output-names = "audmac0", "audmac1", "thermal";
};
mstp7_clks: mstp7_clks at e615014c {
compatible = "renesas,r8a7793-mstp-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 28/70] ARM: dts: r8a7793: add audio DMAC to device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Instantiate the two Audio DMA controllers in the r8a7791 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 58 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index cb6251e71ef9..2c9ab9f18b41 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -301,6 +301,64 @@
dma-channels = <15>;
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 28/70] ARM: dts: r8a7793: add audio DMAC to device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Instantiate the two Audio DMA controllers in the r8a7791 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 58 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index cb6251e71ef9..2c9ab9f18b41 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -301,6 +301,64 @@
dma-channels = <15>;
};
+ audma0: dma-controller at ec700000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audma1: dma-controller at ec720000 {
+ compatible = "renesas,dmac-r8a7793", "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7793_CLK_AUDIO_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&cpg_clocks>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c at e6508000 {
#address-cells = <1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 29/70] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.
Base on work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 2c9ab9f18b41..ddbda9d2c177 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1172,8 +1172,9 @@
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>; /* SSI */
- reg-names = "scu", "adg", "ssiu", "ssi";
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
<&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 29/70] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Audio DMAC peri peri is no longer DMAEngine. it is supported by
sound driver. this patch enable it.
Base on work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 2c9ab9f18b41..ddbda9d2c177 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1172,8 +1172,9 @@
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>; /* SSI */
- reg-names = "scu", "adg", "ssiu", "ssi";
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&mstp10_clks R8A7793_CLK_SSI_ALL>,
<&mstp10_clks R8A7793_CLK_SSI9>, <&mstp10_clks R8A7793_CLK_SSI8>,
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 30/70] ARM: dts: gose: Enable sound PIO support in device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (28 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 31/70] ARM: dts: gose: enable sound DMA " Simon Horman
` (40 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Enable sound PIO support in the r8a7793/gose device tree.
Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 77 ++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 0b4cc8d99390..395ea63746ac 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -8,6 +8,17 @@
* kind, whether express or implied.
*/
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ * 2: CN22
+ * 3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "LINEOUT Mixer DACL" on
+ */
/dts-v1/;
#include "r8a7793.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -130,6 +141,30 @@
};
};
+ audio_clock: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <11289600>;
+ clock-output-names = "audio_clock";
+ };
+
+ rsnd_ak4643: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4643>;
+ clocks = <&audio_clock>;
+ };
+ };
+
hdmi-out {
compatible = "hdmi-connector";
type = "a";
@@ -218,6 +253,16 @@
renesas,groups = "qspi_ctrl", "qspi_data4";
renesas,function = "qspi";
};
+
+ sound_pins: sound {
+ renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ renesas,function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ renesas,groups = "audio_clk_a";
+ renesas,function = "audio_clk";
+ };
};
ðer {
@@ -300,6 +345,12 @@
status = "okay";
clock-frequency = <100000>;
+ ak4643: codec at 12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
hdmi at 39 {
compatible = "adi,adv7511w";
reg = <0x39>;
@@ -338,3 +389,29 @@
pagesize = <16>;
};
};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0>;
+ capture = <&ssi1>;
+ };
+ };
+};
+
+&ssi0 {
+ pio-transfer;
+};
+
+&ssi1 {
+ pio-transfer;
+ shared-pin;
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 31/70] ARM: dts: gose: enable sound DMA support in device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (29 preceding siblings ...)
2016-02-04 14:29 ` [PATCH 30/70] ARM: dts: gose: Enable sound PIO support in device tree Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (39 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Enable DMA transfer to/from SSI in r8a7793/gose device tree.
DMA
[MEM] -> [SSI]
DMA
[MEM] <- [SSI]
Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 395ea63746ac..a4b2dcb8e73d 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -408,10 +408,10 @@
};
&ssi0 {
- pio-transfer;
+ no-busif;
};
&ssi1 {
- pio-transfer;
+ no-busif;
shared-pin;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 32/70] ARM: dts: gose: enable sound DMA support via BUSIF in device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Enable DMA transfer to/from SSIU in gose/r8a7791 device tree.
DMA
[MEM] -> [SSIU] -> [SSI]
DMA
[MEM] <- [SSIU] <- [SSI]
Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index a4b2dcb8e73d..81bfe9484bbc 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -407,11 +407,6 @@
};
};
-&ssi0 {
- no-busif;
-};
-
&ssi1 {
- no-busif;
shared-pin;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 32/70] ARM: dts: gose: enable sound DMA support via BUSIF in device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Enable DMA transfer to/from SSIU in gose/r8a7791 device tree.
DMA
[MEM] -> [SSIU] -> [SSI]
DMA
[MEM] <- [SSIU] <- [SSI]
Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 5 -----
1 file changed, 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index a4b2dcb8e73d..81bfe9484bbc 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -407,11 +407,6 @@
};
};
-&ssi0 {
- no-busif;
-};
-
&ssi1 {
- no-busif;
shared-pin;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 33/70] ARM: dts: gose: enable sound DMA support via SRC in device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (31 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (37 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Enable DMA transfer to/from SRC in r8a7793/gose device tree.
DMA DMApp
[MEM] -> [SRC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [SRC] <- [SSIU] <- [SSI]
Current sound driver is supporting
SSI/SRC random connection.
So, this patch is tring
SSI0 -> SRC2
SSI1 <- SRC3
Based on similar work for the r8a7791/koeslch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 81bfe9484bbc..17c87fe0944f 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -401,8 +401,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0>;
- capture = <&ssi1>;
+ playback = <&ssi0 &src2>;
+ capture = <&ssi1 &src3>;
};
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 34/70] ARM: dts: gose: enable sound DMA support via DVC in device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Enable DMA transfer using DVC in r8a7793/gose device tree.
DMA DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]
Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 17c87fe0944f..2fa052036dbc 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -18,7 +18,24 @@
* This command is required when Playback/Capture
*
* amixer set "LINEOUT Mixer DACL" on
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
*/
+
/dts-v1/;
#include "r8a7793.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -401,8 +418,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0 &src2>;
- capture = <&ssi1 &src3>;
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
};
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 34/70] ARM: dts: gose: enable sound DMA support via DVC in device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Enable DMA transfer using DVC in r8a7793/gose device tree.
DMA DMApp
[MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI]
DMA DMApp
[MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI]
Based on similar work for the r8a7791/koelsch by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 17c87fe0944f..2fa052036dbc 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -18,7 +18,24 @@
* This command is required when Playback/Capture
*
* amixer set "LINEOUT Mixer DACL" on
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
*/
+
/dts-v1/;
#include "r8a7793.dtsi"
#include <dt-bindings/gpio/gpio.h>
@@ -401,8 +418,8 @@
rcar_sound,dai {
dai0 {
- playback = <&ssi0 &src2>;
- capture = <&ssi1 &src3>;
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
};
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 35/70] ARM: dts: r8a7793: enable audio DMAC in device tree
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Enable audio DMAC (= rcar-dmac) in r8a7793 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v4
* Use GIC_SPI in interrupts properties
---
arch/arm/boot/dts/r8a7793.dtsi | 91 ++++++++++++++++++++++++++++++++++++------
1 file changed, 79 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index ddbda9d2c177..6817f14314e2 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1201,52 +1201,119 @@
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc@0 { };
- dvc1: dvc@1 { };
+ dvc0: dvc@0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc@1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
};
+
rcar_sound,src {
- src0: src@0 { };
- src1: src@1 { };
- src2: src@2 { };
- src3: src@3 { };
- src4: src@4 { };
- src5: src@5 { };
- src6: src@6 { };
- src7: src@7 { };
- src8: src@8 { };
- src9: src@9 { };
+ src0: src@0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src@1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src@2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src@3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src@4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src@5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src@6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src@7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src@8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src@9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
};
rcar_sound,ssi {
ssi0: ssi@0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi@1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi@2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi@3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi@4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi@5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi@6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi@7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi@8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi@9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 35/70] ARM: dts: r8a7793: enable audio DMAC in device tree
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Enable audio DMAC (= rcar-dmac) in r8a7793 device tree.
Based on similar work for the r8a7791 by Kuninori Morimoto.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v4
* Use GIC_SPI in interrupts properties
---
arch/arm/boot/dts/r8a7793.dtsi | 91 ++++++++++++++++++++++++++++++++++++------
1 file changed, 79 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index ddbda9d2c177..6817f14314e2 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1201,52 +1201,119 @@
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc at 0 { };
- dvc1: dvc at 1 { };
+ dvc0: dvc at 0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc at 1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
};
+
rcar_sound,src {
- src0: src at 0 { };
- src1: src at 1 { };
- src2: src at 2 { };
- src3: src at 3 { };
- src4: src at 4 { };
- src5: src at 5 { };
- src6: src at 6 { };
- src7: src at 7 { };
- src8: src at 8 { };
- src9: src at 9 { };
+ src0: src at 0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src at 1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src at 2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src at 3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src at 4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src at 5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src at 6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src at 7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src at 8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src at 9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
};
rcar_sound,ssi {
ssi0: ssi at 0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi at 1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi2: ssi at 2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi3: ssi at 3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi4: ssi at 4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi5: ssi at 5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi6: ssi at 6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi7: ssi at 7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi8: ssi at 8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi9: ssi at 9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
};
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 36/70] ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Migrate the generic r8a7740 platform from calling l2x0_of_init() to the
generic l2c OF initialization.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 0c8f80c5b04d..7b16c12e3f81 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -110,10 +110,6 @@ static void __init r8a7740_generic_init(void)
{
r8a7740_meram_workaround();
-#ifdef CONFIG_CACHE_L2X0
- /* Shared attribute override enable, 32K*8way */
- l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -123,6 +119,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
.map_io = r8a7740_map_io,
.init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 36/70] ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Migrate the generic r8a7740 platform from calling l2x0_of_init() to the
generic l2c OF initialization.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 0c8f80c5b04d..7b16c12e3f81 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -110,10 +110,6 @@ static void __init r8a7740_generic_init(void)
{
r8a7740_meram_workaround();
-#ifdef CONFIG_CACHE_L2X0
- /* Shared attribute override enable, 32K*8way */
- l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
-#endif
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
@@ -123,6 +119,8 @@ static const char *const r8a7740_boards_compat_dt[] __initconst = {
};
DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
.map_io = r8a7740_map_io,
.init_early = shmobile_init_delay,
.init_irq = r8a7740_init_irq_of,
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 37/70] ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Now all r8a7740-based platforms have been migrated to the generic l2c OF
initialization, it's no longer needed to map the L2 cache controller
registers from .map_io().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 7b16c12e3f81..496569f9d578 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -38,18 +38,6 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
.length = 160 << 20,
.type = MT_DEVICE_NONSHARED
},
-#ifdef CONFIG_CACHE_L2X0
- /*
- * for l2x0_init()
- * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
- */
- {
- .virtual = 0xf0002000,
- .pfn = __phys_to_pfn(0xf0100000),
- .length = PAGE_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
-#endif
};
static void __init r8a7740_map_io(void)
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 37/70] ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Now all r8a7740-based platforms have been migrated to the generic l2c OF
initialization, it's no longer needed to map the L2 cache controller
registers from .map_io().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 7b16c12e3f81..496569f9d578 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -38,18 +38,6 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
.length = 160 << 20,
.type = MT_DEVICE_NONSHARED
},
-#ifdef CONFIG_CACHE_L2X0
- /*
- * for l2x0_init()
- * 0xf0100000-0xf0101000 -> 0xf0002000-0xf0003000
- */
- {
- .virtual = 0xf0002000,
- .pfn = __phys_to_pfn(0xf0100000),
- .length = PAGE_SIZE,
- .type = MT_DEVICE_NONSHARED
- },
-#endif
};
static void __init r8a7740_map_io(void)
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 38/70] ARM: dts: r7s72100: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use GIC_* defines for GIC interrupt cells in r7s72100 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r7s72100.dtsi | 161 ++++++++++++++++++++--------------------
1 file changed, 81 insertions(+), 80 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 4657d7fb5bce..a5938c72d5bd 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -152,10 +153,10 @@
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
- interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
- <0 191 IRQ_TYPE_LEVEL_HIGH>,
- <0 192 IRQ_TYPE_LEVEL_HIGH>,
- <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -165,10 +166,10 @@
scif1: serial@e8007800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007800 64>;
- interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
- <0 195 IRQ_TYPE_LEVEL_HIGH>,
- <0 196 IRQ_TYPE_LEVEL_HIGH>,
- <0 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -178,10 +179,10 @@
scif2: serial@e8008000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8008000 64>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>,
- <0 200 IRQ_TYPE_LEVEL_HIGH>,
- <0 197 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -191,10 +192,10 @@
scif3: serial@e8008800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8008800 64>;
- interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
- <0 203 IRQ_TYPE_LEVEL_HIGH>,
- <0 204 IRQ_TYPE_LEVEL_HIGH>,
- <0 201 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -204,10 +205,10 @@
scif4: serial@e8009000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8009000 64>;
- interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
- <0 207 IRQ_TYPE_LEVEL_HIGH>,
- <0 208 IRQ_TYPE_LEVEL_HIGH>,
- <0 205 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -217,10 +218,10 @@
scif5: serial@e8009800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8009800 64>;
- interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
- <0 211 IRQ_TYPE_LEVEL_HIGH>,
- <0 212 IRQ_TYPE_LEVEL_HIGH>,
- <0 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -230,10 +231,10 @@
scif6: serial@e800a000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe800a000 64>;
- interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
- <0 215 IRQ_TYPE_LEVEL_HIGH>,
- <0 216 IRQ_TYPE_LEVEL_HIGH>,
- <0 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -243,10 +244,10 @@
scif7: serial@e800a800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe800a800 64>;
- interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
- <0 219 IRQ_TYPE_LEVEL_HIGH>,
- <0 220 IRQ_TYPE_LEVEL_HIGH>,
- <0 217 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -256,9 +257,9 @@
spi0: spi@e800c800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800c800 0x24>;
- interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
- <0 239 IRQ_TYPE_LEVEL_HIGH>,
- <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
power-domains = <&cpg_clocks>;
@@ -271,9 +272,9 @@
spi1: spi@e800d000 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800d000 0x24>;
- interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
- <0 242 IRQ_TYPE_LEVEL_HIGH>,
- <0 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
power-domains = <&cpg_clocks>;
@@ -286,9 +287,9 @@
spi2: spi@e800d800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800d800 0x24>;
- interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
- <0 245 IRQ_TYPE_LEVEL_HIGH>,
- <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
power-domains = <&cpg_clocks>;
@@ -301,9 +302,9 @@
spi3: spi@e800e000 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800e000 0x24>;
- interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
- <0 248 IRQ_TYPE_LEVEL_HIGH>,
- <0 249 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
power-domains = <&cpg_clocks>;
@@ -316,9 +317,9 @@
spi4: spi@e800e800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800e800 0x24>;
- interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
- <0 251 IRQ_TYPE_LEVEL_HIGH>,
- <0 252 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
power-domains = <&cpg_clocks>;
@@ -342,14 +343,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee000 0x44>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
- <0 158 IRQ_TYPE_EDGE_RISING>,
- <0 159 IRQ_TYPE_EDGE_RISING>,
- <0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -361,14 +362,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee400 0x44>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 166 IRQ_TYPE_EDGE_RISING>,
- <0 167 IRQ_TYPE_EDGE_RISING>,
- <0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 169 IRQ_TYPE_LEVEL_HIGH>,
- <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -380,14 +381,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee800 0x44>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
- <0 174 IRQ_TYPE_EDGE_RISING>,
- <0 175 IRQ_TYPE_EDGE_RISING>,
- <0 176 IRQ_TYPE_LEVEL_HIGH>,
- <0 177 IRQ_TYPE_LEVEL_HIGH>,
- <0 178 IRQ_TYPE_LEVEL_HIGH>,
- <0 179 IRQ_TYPE_LEVEL_HIGH>,
- <0 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -399,14 +400,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfeec00 0x44>;
- interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
- <0 182 IRQ_TYPE_EDGE_RISING>,
- <0 183 IRQ_TYPE_EDGE_RISING>,
- <0 184 IRQ_TYPE_LEVEL_HIGH>,
- <0 185 IRQ_TYPE_LEVEL_HIGH>,
- <0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 187 IRQ_TYPE_LEVEL_HIGH>,
- <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -416,7 +417,7 @@
mtu2: timer@fcff0000 {
compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tgi0a";
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 38/70] ARM: dts: r7s72100: use GIC_* defines
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in r7s72100 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/r7s72100.dtsi | 161 ++++++++++++++++++++--------------------
1 file changed, 81 insertions(+), 80 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 4657d7fb5bce..a5938c72d5bd 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/r7s72100-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -152,10 +153,10 @@
scif0: serial at e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
- interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
- <0 191 IRQ_TYPE_LEVEL_HIGH>,
- <0 192 IRQ_TYPE_LEVEL_HIGH>,
- <0 189 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -165,10 +166,10 @@
scif1: serial at e8007800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007800 64>;
- interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
- <0 195 IRQ_TYPE_LEVEL_HIGH>,
- <0 196 IRQ_TYPE_LEVEL_HIGH>,
- <0 193 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -178,10 +179,10 @@
scif2: serial at e8008000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8008000 64>;
- interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
- <0 199 IRQ_TYPE_LEVEL_HIGH>,
- <0 200 IRQ_TYPE_LEVEL_HIGH>,
- <0 197 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -191,10 +192,10 @@
scif3: serial at e8008800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8008800 64>;
- interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
- <0 203 IRQ_TYPE_LEVEL_HIGH>,
- <0 204 IRQ_TYPE_LEVEL_HIGH>,
- <0 201 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -204,10 +205,10 @@
scif4: serial at e8009000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8009000 64>;
- interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
- <0 207 IRQ_TYPE_LEVEL_HIGH>,
- <0 208 IRQ_TYPE_LEVEL_HIGH>,
- <0 205 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -217,10 +218,10 @@
scif5: serial at e8009800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8009800 64>;
- interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
- <0 211 IRQ_TYPE_LEVEL_HIGH>,
- <0 212 IRQ_TYPE_LEVEL_HIGH>,
- <0 209 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -230,10 +231,10 @@
scif6: serial at e800a000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe800a000 64>;
- interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
- <0 215 IRQ_TYPE_LEVEL_HIGH>,
- <0 216 IRQ_TYPE_LEVEL_HIGH>,
- <0 213 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -243,10 +244,10 @@
scif7: serial at e800a800 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe800a800 64>;
- interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
- <0 219 IRQ_TYPE_LEVEL_HIGH>,
- <0 220 IRQ_TYPE_LEVEL_HIGH>,
- <0 217 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
clock-names = "sci_ick";
power-domains = <&cpg_clocks>;
@@ -256,9 +257,9 @@
spi0: spi at e800c800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800c800 0x24>;
- interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
- <0 239 IRQ_TYPE_LEVEL_HIGH>,
- <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI0>;
power-domains = <&cpg_clocks>;
@@ -271,9 +272,9 @@
spi1: spi at e800d000 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800d000 0x24>;
- interrupts = <0 241 IRQ_TYPE_LEVEL_HIGH>,
- <0 242 IRQ_TYPE_LEVEL_HIGH>,
- <0 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI1>;
power-domains = <&cpg_clocks>;
@@ -286,9 +287,9 @@
spi2: spi at e800d800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800d800 0x24>;
- interrupts = <0 244 IRQ_TYPE_LEVEL_HIGH>,
- <0 245 IRQ_TYPE_LEVEL_HIGH>,
- <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI2>;
power-domains = <&cpg_clocks>;
@@ -301,9 +302,9 @@
spi3: spi at e800e000 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800e000 0x24>;
- interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>,
- <0 248 IRQ_TYPE_LEVEL_HIGH>,
- <0 249 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI3>;
power-domains = <&cpg_clocks>;
@@ -316,9 +317,9 @@
spi4: spi at e800e800 {
compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
reg = <0xe800e800 0x24>;
- interrupts = <0 250 IRQ_TYPE_LEVEL_HIGH>,
- <0 251 IRQ_TYPE_LEVEL_HIGH>,
- <0 252 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "error", "rx", "tx";
clocks = <&mstp10_clks R7S72100_CLK_SPI4>;
power-domains = <&cpg_clocks>;
@@ -342,14 +343,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee000 0x44>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
- <0 158 IRQ_TYPE_EDGE_RISING>,
- <0 159 IRQ_TYPE_EDGE_RISING>,
- <0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -361,14 +362,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee400 0x44>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 166 IRQ_TYPE_EDGE_RISING>,
- <0 167 IRQ_TYPE_EDGE_RISING>,
- <0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 169 IRQ_TYPE_LEVEL_HIGH>,
- <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -380,14 +381,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfee800 0x44>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
- <0 174 IRQ_TYPE_EDGE_RISING>,
- <0 175 IRQ_TYPE_EDGE_RISING>,
- <0 176 IRQ_TYPE_LEVEL_HIGH>,
- <0 177 IRQ_TYPE_LEVEL_HIGH>,
- <0 178 IRQ_TYPE_LEVEL_HIGH>,
- <0 179 IRQ_TYPE_LEVEL_HIGH>,
- <0 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -399,14 +400,14 @@
#size-cells = <0>;
compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
reg = <0xfcfeec00 0x44>;
- interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
- <0 182 IRQ_TYPE_EDGE_RISING>,
- <0 183 IRQ_TYPE_EDGE_RISING>,
- <0 184 IRQ_TYPE_LEVEL_HIGH>,
- <0 185 IRQ_TYPE_LEVEL_HIGH>,
- <0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 187 IRQ_TYPE_LEVEL_HIGH>,
- <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
clock-frequency = <100000>;
power-domains = <&cpg_clocks>;
@@ -416,7 +417,7 @@
mtu2: timer at fcff0000 {
compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tgi0a";
clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
clock-names = "fck";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 39/70] ARM: dts: sh73a0: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use GIC_* defines for GIC interrupt cells in sh73a0 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/sh73a0.dtsi | 168 +++++++++++++++++++++---------------------
1 file changed, 84 insertions(+), 84 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 3a6056f9f0d2..453280c41d27 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -58,7 +58,7 @@
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
- interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_a3sm>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
@@ -70,8 +70,8 @@
sbsc2: memory-controller@fb400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfb400000 0x400>;
- interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
power-domains = <&pd_a4bc1>;
};
@@ -79,22 +79,22 @@
sbsc1: memory-controller@fe400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfe400000 0x400>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
power-domains = <&pd_a4bc0>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
- <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
cmt1: timer@e6138000 {
compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
reg = <0xe6138000 0x200>;
- interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
@@ -113,14 +113,14 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
- 0 2 IRQ_TYPE_LEVEL_HIGH
- 0 3 IRQ_TYPE_LEVEL_HIGH
- 0 4 IRQ_TYPE_LEVEL_HIGH
- 0 5 IRQ_TYPE_LEVEL_HIGH
- 0 6 IRQ_TYPE_LEVEL_HIGH
- 0 7 IRQ_TYPE_LEVEL_HIGH
- 0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -135,14 +135,14 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
- 0 10 IRQ_TYPE_LEVEL_HIGH
- 0 11 IRQ_TYPE_LEVEL_HIGH
- 0 12 IRQ_TYPE_LEVEL_HIGH
- 0 13 IRQ_TYPE_LEVEL_HIGH
- 0 14 IRQ_TYPE_LEVEL_HIGH
- 0 15 IRQ_TYPE_LEVEL_HIGH
- 0 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -157,14 +157,14 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
- 0 18 IRQ_TYPE_LEVEL_HIGH
- 0 19 IRQ_TYPE_LEVEL_HIGH
- 0 20 IRQ_TYPE_LEVEL_HIGH
- 0 21 IRQ_TYPE_LEVEL_HIGH
- 0 22 IRQ_TYPE_LEVEL_HIGH
- 0 23 IRQ_TYPE_LEVEL_HIGH
- 0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -179,14 +179,14 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
- 0 26 IRQ_TYPE_LEVEL_HIGH
- 0 27 IRQ_TYPE_LEVEL_HIGH
- 0 28 IRQ_TYPE_LEVEL_HIGH
- 0 29 IRQ_TYPE_LEVEL_HIGH
- 0 30 IRQ_TYPE_LEVEL_HIGH
- 0 31 IRQ_TYPE_LEVEL_HIGH
- 0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -197,10 +197,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
- 0 168 IRQ_TYPE_LEVEL_HIGH
- 0 169 IRQ_TYPE_LEVEL_HIGH
- 0 170 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -211,10 +211,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
- interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
- 0 52 IRQ_TYPE_LEVEL_HIGH
- 0 53 IRQ_TYPE_LEVEL_HIGH
- 0 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -225,10 +225,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
- interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
- 0 172 IRQ_TYPE_LEVEL_HIGH
- 0 173 IRQ_TYPE_LEVEL_HIGH
- 0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -239,10 +239,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
- interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
- 0 184 IRQ_TYPE_LEVEL_HIGH
- 0 185 IRQ_TYPE_LEVEL_HIGH
- 0 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -253,10 +253,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
- interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
- 0 188 IRQ_TYPE_LEVEL_HIGH
- 0 189 IRQ_TYPE_LEVEL_HIGH
- 0 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
power-domains = <&pd_c5>;
status = "disabled";
@@ -265,8 +265,8 @@
mmcif: mmc@e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
- 0 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
power-domains = <&pd_a3sp>;
reg-io-width = <4>;
@@ -276,7 +276,7 @@
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6e20000 0x0064>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -287,7 +287,7 @@
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6e10000 0x0064>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -298,7 +298,7 @@
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6e00000 0x0064>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -309,7 +309,7 @@
msiof3: spi@e6c90000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6c90000 0x0064>;
- interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -320,9 +320,9 @@
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
- 0 84 IRQ_TYPE_LEVEL_HIGH
- 0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -333,8 +333,8 @@
sdhi1: sd@ee120000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee120000 0x100>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
- 0 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
toshiba,mmc-wrprotect-disable;
@@ -345,8 +345,8 @@
sdhi2: sd@ee140000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee140000 0x100>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
- 0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
toshiba,mmc-wrprotect-disable;
@@ -357,7 +357,7 @@
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c40000 0x100>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -367,7 +367,7 @@
scifa1: serial@e6c50000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c50000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -377,7 +377,7 @@
scifa2: serial@e6c60000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c60000 0x100>;
- interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -387,7 +387,7 @@
scifa3: serial@e6c70000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c70000 0x100>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -397,7 +397,7 @@
scifa4: serial@e6c80000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c80000 0x100>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -407,7 +407,7 @@
scifa5: serial@e6cb0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
- interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -417,7 +417,7 @@
scifa6: serial@e6cc0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -427,7 +427,7 @@
scifa7: serial@e6cd0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
- interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -437,7 +437,7 @@
scifb: serial@e6c30000 {
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -579,7 +579,7 @@
#sound-dai-cells = <1>;
compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
- interrupts = <0 146 0x4>;
+ interrupts = <GIC_SPI 146 0x4>;
power-domains = <&pd_a4mp>;
status = "disabled";
};
@@ -591,7 +591,7 @@
#size-cells = <1>;
ranges = <0 0 0x20000000>;
reg = <0xfec10000 0x400>;
- interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&zb_clk>;
power-domains = <&pd_a4s>;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 39/70] ARM: dts: sh73a0: use GIC_* defines
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in sh73a0 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm/boot/dts/sh73a0.dtsi | 168 +++++++++++++++++++++---------------------
1 file changed, 84 insertions(+), 84 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 3a6056f9f0d2..453280c41d27 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -58,7 +58,7 @@
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
- interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_a3sm>;
arm,data-latency = <3 3 3>;
arm,tag-latency = <2 2 2>;
@@ -70,8 +70,8 @@
sbsc2: memory-controller at fb400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfb400000 0x400>;
- interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
- <0 38 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
power-domains = <&pd_a4bc1>;
};
@@ -79,22 +79,22 @@
sbsc1: memory-controller at fe400000 {
compatible = "renesas,sbsc-sh73a0";
reg = <0xfe400000 0x400>;
- interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
- <0 36 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "sec", "temp";
power-domains = <&pd_a4bc0>;
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>,
- <0 56 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
cmt1: timer at e6138000 {
compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
reg = <0xe6138000 0x200>;
- interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
clock-names = "fck";
power-domains = <&pd_c5>;
@@ -113,14 +113,14 @@
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
- interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH
- 0 2 IRQ_TYPE_LEVEL_HIGH
- 0 3 IRQ_TYPE_LEVEL_HIGH
- 0 4 IRQ_TYPE_LEVEL_HIGH
- 0 5 IRQ_TYPE_LEVEL_HIGH
- 0 6 IRQ_TYPE_LEVEL_HIGH
- 0 7 IRQ_TYPE_LEVEL_HIGH
- 0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -135,14 +135,14 @@
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH
- 0 10 IRQ_TYPE_LEVEL_HIGH
- 0 11 IRQ_TYPE_LEVEL_HIGH
- 0 12 IRQ_TYPE_LEVEL_HIGH
- 0 13 IRQ_TYPE_LEVEL_HIGH
- 0 14 IRQ_TYPE_LEVEL_HIGH
- 0 15 IRQ_TYPE_LEVEL_HIGH
- 0 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -157,14 +157,14 @@
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
- interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH
- 0 18 IRQ_TYPE_LEVEL_HIGH
- 0 19 IRQ_TYPE_LEVEL_HIGH
- 0 20 IRQ_TYPE_LEVEL_HIGH
- 0 21 IRQ_TYPE_LEVEL_HIGH
- 0 22 IRQ_TYPE_LEVEL_HIGH
- 0 23 IRQ_TYPE_LEVEL_HIGH
- 0 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -179,14 +179,14 @@
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
- interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH
- 0 26 IRQ_TYPE_LEVEL_HIGH
- 0 27 IRQ_TYPE_LEVEL_HIGH
- 0 28 IRQ_TYPE_LEVEL_HIGH
- 0 29 IRQ_TYPE_LEVEL_HIGH
- 0 30 IRQ_TYPE_LEVEL_HIGH
- 0 31 IRQ_TYPE_LEVEL_HIGH
- 0 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks SH73A0_CLK_INTCA0>;
power-domains = <&pd_a4s>;
control-parent;
@@ -197,10 +197,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
- interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
- 0 168 IRQ_TYPE_LEVEL_HIGH
- 0 169 IRQ_TYPE_LEVEL_HIGH
- 0 170 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -211,10 +211,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
- interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
- 0 52 IRQ_TYPE_LEVEL_HIGH
- 0 53 IRQ_TYPE_LEVEL_HIGH
- 0 54 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -225,10 +225,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
- interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
- 0 172 IRQ_TYPE_LEVEL_HIGH
- 0 173 IRQ_TYPE_LEVEL_HIGH
- 0 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -239,10 +239,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
- interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
- 0 184 IRQ_TYPE_LEVEL_HIGH
- 0 185 IRQ_TYPE_LEVEL_HIGH
- 0 186 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
power-domains = <&pd_a3sp>;
status = "disabled";
@@ -253,10 +253,10 @@
#size-cells = <0>;
compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
- interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
- 0 188 IRQ_TYPE_LEVEL_HIGH
- 0 189 IRQ_TYPE_LEVEL_HIGH
- 0 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
power-domains = <&pd_c5>;
status = "disabled";
@@ -265,8 +265,8 @@
mmcif: mmc at e6bd0000 {
compatible = "renesas,sh-mmcif";
reg = <0xe6bd0000 0x100>;
- interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
- 0 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
power-domains = <&pd_a3sp>;
reg-io-width = <4>;
@@ -276,7 +276,7 @@
msiof0: spi at e6e20000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6e20000 0x0064>;
- interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks SH73A0_CLK_MSIOF0>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -287,7 +287,7 @@
msiof1: spi at e6e10000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6e10000 0x0064>;
- interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_MSIOF1>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -298,7 +298,7 @@
msiof2: spi at e6e00000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6e00000 0x0064>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_MSIOF2>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -309,7 +309,7 @@
msiof3: spi at e6c90000 {
compatible = "renesas,msiof-sh73a0", "renesas,sh-mobile-msiof";
reg = <0xe6c90000 0x0064>;
- interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_MSIOF3>;
power-domains = <&pd_a3sp>;
#address-cells = <1>;
@@ -320,9 +320,9 @@
sdhi0: sd at ee100000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee100000 0x100>;
- interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH
- 0 84 IRQ_TYPE_LEVEL_HIGH
- 0 85 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
power-domains = <&pd_a3sp>;
cap-sd-highspeed;
@@ -333,8 +333,8 @@
sdhi1: sd at ee120000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee120000 0x100>;
- interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH
- 0 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
power-domains = <&pd_a3sp>;
toshiba,mmc-wrprotect-disable;
@@ -345,8 +345,8 @@
sdhi2: sd at ee140000 {
compatible = "renesas,sdhi-sh73a0";
reg = <0xee140000 0x100>;
- interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH
- 0 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
power-domains = <&pd_a3sp>;
toshiba,mmc-wrprotect-disable;
@@ -357,7 +357,7 @@
scifa0: serial at e6c40000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c40000 0x100>;
- interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -367,7 +367,7 @@
scifa1: serial at e6c50000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c50000 0x100>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -377,7 +377,7 @@
scifa2: serial at e6c60000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c60000 0x100>;
- interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -387,7 +387,7 @@
scifa3: serial at e6c70000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c70000 0x100>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -397,7 +397,7 @@
scifa4: serial at e6c80000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6c80000 0x100>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -407,7 +407,7 @@
scifa5: serial at e6cb0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cb0000 0x100>;
- interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -417,7 +417,7 @@
scifa6: serial at e6cc0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cc0000 0x100>;
- interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -427,7 +427,7 @@
scifa7: serial at e6cd0000 {
compatible = "renesas,scifa-sh73a0", "renesas,scifa";
reg = <0xe6cd0000 0x100>;
- interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -437,7 +437,7 @@
scifb: serial at e6c30000 {
compatible = "renesas,scifb-sh73a0", "renesas,scifb";
reg = <0xe6c30000 0x100>;
- interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
clock-names = "sci_ick";
power-domains = <&pd_a3sp>;
@@ -579,7 +579,7 @@
#sound-dai-cells = <1>;
compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
reg = <0xec230000 0x400>;
- interrupts = <0 146 0x4>;
+ interrupts = <GIC_SPI 146 0x4>;
power-domains = <&pd_a4mp>;
status = "disabled";
};
@@ -591,7 +591,7 @@
#size-cells = <1>;
ranges = <0 0 0x20000000>;
reg = <0xfec10000 0x400>;
- interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&zb_clk>;
power-domains = <&pd_a4s>;
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 40/70] ARM: dts: emev2: use GIC_* defines
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Use GIC_* defines for GIC interrupt cells in emev2 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2.dtsi | 39 ++++++++++++++++++++-------------------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 57795da616cb..bcce6f50c93d 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -53,8 +54,8 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks@e0110000 {
@@ -158,7 +159,7 @@
timer@e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sti_sclk>;
clock-names = "sclk";
};
@@ -166,7 +167,7 @@
uart0: serial@e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usia_u0_sclk>;
clock-names = "sclk";
};
@@ -174,7 +175,7 @@
uart1: serial@e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u1_sclk>;
clock-names = "sclk";
};
@@ -182,7 +183,7 @@
uart2: serial@e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u2_sclk>;
clock-names = "sclk";
};
@@ -190,7 +191,7 @@
uart3: serial@e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u3_sclk>;
clock-names = "sclk";
};
@@ -203,8 +204,8 @@
gpio0: gpio@e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
- <0 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#gpio-cells = <2>;
@@ -215,8 +216,8 @@
gpio1: gpio@e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#gpio-cells = <2>;
@@ -227,8 +228,8 @@
gpio2: gpio@e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
- <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#gpio-cells = <2>;
@@ -239,8 +240,8 @@
gpio3: gpio@e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
- <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#gpio-cells = <2>;
@@ -251,8 +252,8 @@
gpio4: gpio@e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
- <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 128 31>;
#gpio-cells = <2>;
@@ -266,7 +267,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
- interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
status = "disabled";
@@ -277,7 +278,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe10a0000 0x28>;
- interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic1_sclk>;
clock-names = "sclk";
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 40/70] ARM: dts: emev2: use GIC_* defines
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
Use GIC_* defines for GIC interrupt cells in emev2 device tree.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/emev2.dtsi | 39 ++++++++++++++++++++-------------------
1 file changed, 20 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index 57795da616cb..bcce6f50c93d 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -9,6 +9,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
@@ -53,8 +54,8 @@
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
- <0 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks at e0110000 {
@@ -158,7 +159,7 @@
timer at e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sti_sclk>;
clock-names = "sclk";
};
@@ -166,7 +167,7 @@
uart0: serial at e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usia_u0_sclk>;
clock-names = "sclk";
};
@@ -174,7 +175,7 @@
uart1: serial at e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
- interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u1_sclk>;
clock-names = "sclk";
};
@@ -182,7 +183,7 @@
uart2: serial at e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u2_sclk>;
clock-names = "sclk";
};
@@ -190,7 +191,7 @@
uart3: serial at e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
- interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usib_u3_sclk>;
clock-names = "sclk";
};
@@ -203,8 +204,8 @@
gpio0: gpio at e0050000 {
compatible = "renesas,em-gio";
reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
- <0 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 0 32>;
#gpio-cells = <2>;
@@ -215,8 +216,8 @@
gpio1: gpio at e0050080 {
compatible = "renesas,em-gio";
reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
- interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
- <0 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 32 32>;
#gpio-cells = <2>;
@@ -227,8 +228,8 @@
gpio2: gpio at e0050100 {
compatible = "renesas,em-gio";
reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
- interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
- <0 72 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 64 32>;
#gpio-cells = <2>;
@@ -239,8 +240,8 @@
gpio3: gpio at e0050180 {
compatible = "renesas,em-gio";
reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
- interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
- <0 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 96 32>;
#gpio-cells = <2>;
@@ -251,8 +252,8 @@
gpio4: gpio at e0050200 {
compatible = "renesas,em-gio";
reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
- <0 76 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&pfc 0 128 31>;
#gpio-cells = <2>;
@@ -266,7 +267,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe0070000 0x28>;
- interrupts = <0 32 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic0_sclk>;
clock-names = "sclk";
status = "disabled";
@@ -277,7 +278,7 @@
#size-cells = <0>;
compatible = "renesas,iic-emev2";
reg = <0xe10a0000 0x28>;
- interrupts = <0 33 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
clocks = <&iic1_sclk>;
clock-names = "sclk";
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 41/70] ARM: dts: r8a7778: Add SCIF fallback compatibility strings
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index fc5e7243467a..8ea1792c5146 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -297,7 +297,8 @@
};
scif0: serial@ffe40000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
@@ -307,7 +308,8 @@
};
scif1: serial@ffe41000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
@@ -317,7 +319,8 @@
};
scif2: serial@ffe42000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
@@ -327,7 +330,8 @@
};
scif3: serial@ffe43000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
@@ -337,7 +341,8 @@
};
scif4: serial@ffe44000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
@@ -347,7 +352,8 @@
};
scif5: serial@ffe45000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 41/70] ARM: dts: r8a7778: Add SCIF fallback compatibility strings
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index fc5e7243467a..8ea1792c5146 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -297,7 +297,8 @@
};
scif0: serial at ffe40000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
@@ -307,7 +308,8 @@
};
scif1: serial at ffe41000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
@@ -317,7 +319,8 @@
};
scif2: serial at ffe42000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
@@ -327,7 +330,8 @@
};
scif3: serial at ffe43000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
@@ -337,7 +341,8 @@
};
scif4: serial at ffe44000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
@@ -347,7 +352,8 @@
};
scif5: serial at ffe45000 {
- compatible = "renesas,scif-r8a7778", "renesas,scif";
+ compatible = "renesas,scif-r8a7778", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 42/70] ARM: dts: r8a7779: Add SCIF fallback compatibility strings
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 93f3fdf95e31..1671839f55a6 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -211,7 +211,8 @@
};
scif0: serial@ffe40000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
@@ -221,7 +222,8 @@
};
scif1: serial@ffe41000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
@@ -231,7 +233,8 @@
};
scif2: serial@ffe42000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
@@ -241,7 +244,8 @@
};
scif3: serial@ffe43000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
@@ -251,7 +255,8 @@
};
scif4: serial@ffe44000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
@@ -261,7 +266,8 @@
};
scif5: serial@ffe45000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 42/70] ARM: dts: r8a7779: Add SCIF fallback compatibility strings
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 93f3fdf95e31..1671839f55a6 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -211,7 +211,8 @@
};
scif0: serial at ffe40000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
@@ -221,7 +222,8 @@
};
scif1: serial at ffe41000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
@@ -231,7 +233,8 @@
};
scif2: serial at ffe42000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
@@ -241,7 +244,8 @@
};
scif3: serial at ffe43000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
@@ -251,7 +255,8 @@
};
scif4: serial at ffe44000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
@@ -261,7 +266,8 @@
};
scif5: serial at ffe45000 {
- compatible = "renesas,scif-r8a7779", "renesas,scif";
+ compatible = "renesas,scif-r8a7779", "renesas,rcar-gen1-scif",
+ "renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 43/70] ARM: dts: r8a7790: Add SCIF fallback compatibility strings
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (41 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (27 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index cc7eccf0ada7..1d94dfd53141 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -585,7 +585,8 @@
};
scifa0: serial at e6c40000 {
- compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7790",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
@@ -597,7 +598,8 @@
};
scifa1: serial at e6c50000 {
- compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7790",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
@@ -609,7 +611,8 @@
};
scifa2: serial at e6c60000 {
- compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7790",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
@@ -621,7 +624,8 @@
};
scifb0: serial at e6c20000 {
- compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7790",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
@@ -633,7 +637,8 @@
};
scifb1: serial at e6c30000 {
- compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7790",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
@@ -645,7 +650,8 @@
};
scifb2: serial at e6ce0000 {
- compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7790",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
@@ -657,7 +663,8 @@
};
scif0: serial at e6e60000 {
- compatible = "renesas,scif-r8a7790", "renesas,scif";
+ compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
@@ -669,7 +676,8 @@
};
scif1: serial at e6e68000 {
- compatible = "renesas,scif-r8a7790", "renesas,scif";
+ compatible = "renesas,scif-r8a7790", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
@@ -681,7 +689,8 @@
};
hscif0: serial at e62c0000 {
- compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7790",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
@@ -693,7 +702,8 @@
};
hscif1: serial at e62c8000 {
- compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7790",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 44/70] ARM: dts: r8a7791: Add SCIF fallback compatibility strings
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6b3b02c0c58a..e7537ba68b5e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -564,7 +564,8 @@
};
scifa0: serial@e6c40000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
@@ -576,7 +577,8 @@
};
scifa1: serial@e6c50000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
@@ -588,7 +590,8 @@
};
scifa2: serial@e6c60000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
@@ -600,7 +603,8 @@
};
scifa3: serial@e6c70000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
@@ -612,7 +616,8 @@
};
scifa4: serial@e6c78000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
@@ -624,7 +629,8 @@
};
scifa5: serial@e6c80000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
@@ -636,7 +642,8 @@
};
scifb0: serial@e6c20000 {
- compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7791",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
@@ -648,7 +655,8 @@
};
scifb1: serial@e6c30000 {
- compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7791",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
@@ -660,7 +668,8 @@
};
scifb2: serial@e6ce0000 {
- compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7791",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
@@ -672,7 +681,8 @@
};
scif0: serial@e6e60000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
@@ -684,7 +694,8 @@
};
scif1: serial@e6e68000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
@@ -696,7 +707,8 @@
};
scif2: serial@e6e58000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
@@ -708,7 +720,8 @@
};
scif3: serial@e6ea8000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
@@ -720,7 +733,8 @@
};
scif4: serial@e6ee0000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
@@ -732,7 +746,8 @@
};
scif5: serial@e6ee8000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
@@ -744,7 +759,8 @@
};
hscif0: serial@e62c0000 {
- compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7791",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
@@ -756,7 +772,8 @@
};
hscif1: serial@e62c8000 {
- compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7791",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
@@ -768,7 +785,8 @@
};
hscif2: serial@e62d0000 {
- compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7791",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 44/70] ARM: dts: r8a7791: Add SCIF fallback compatibility strings
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6b3b02c0c58a..e7537ba68b5e 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -564,7 +564,8 @@
};
scifa0: serial at e6c40000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
@@ -576,7 +577,8 @@
};
scifa1: serial at e6c50000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
@@ -588,7 +590,8 @@
};
scifa2: serial at e6c60000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
@@ -600,7 +603,8 @@
};
scifa3: serial at e6c70000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
@@ -612,7 +616,8 @@
};
scifa4: serial at e6c78000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
@@ -624,7 +629,8 @@
};
scifa5: serial at e6c80000 {
- compatible = "renesas,scifa-r8a7791", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7791",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
@@ -636,7 +642,8 @@
};
scifb0: serial at e6c20000 {
- compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7791",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
@@ -648,7 +655,8 @@
};
scifb1: serial at e6c30000 {
- compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7791",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
@@ -660,7 +668,8 @@
};
scifb2: serial at e6ce0000 {
- compatible = "renesas,scifb-r8a7791", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7791",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
@@ -672,7 +681,8 @@
};
scif0: serial at e6e60000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
@@ -684,7 +694,8 @@
};
scif1: serial at e6e68000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
@@ -696,7 +707,8 @@
};
scif2: serial at e6e58000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
@@ -708,7 +720,8 @@
};
scif3: serial at e6ea8000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
@@ -720,7 +733,8 @@
};
scif4: serial at e6ee0000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
@@ -732,7 +746,8 @@
};
scif5: serial at e6ee8000 {
- compatible = "renesas,scif-r8a7791", "renesas,scif";
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
@@ -744,7 +759,8 @@
};
hscif0: serial at e62c0000 {
- compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7791",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
@@ -756,7 +772,8 @@
};
hscif1: serial at e62c8000 {
- compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7791",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
@@ -768,7 +785,8 @@
};
hscif2: serial at e62d0000 {
- compatible = "renesas,hscif-r8a7791", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7791",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 45/70] ARM: dts: r8a7793: Add SCIF fallback compatibility strings
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (43 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (25 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 6817f14314e2..b49f9271ceb3 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -479,7 +479,8 @@
};
scifa0: serial at e6c40000 {
- compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7793",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
@@ -491,7 +492,8 @@
};
scifa1: serial at e6c50000 {
- compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7793",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
@@ -503,7 +505,8 @@
};
scifa2: serial at e6c60000 {
- compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7793",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
@@ -515,7 +518,8 @@
};
scifa3: serial at e6c70000 {
- compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7793",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
@@ -527,7 +531,8 @@
};
scifa4: serial at e6c78000 {
- compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7793",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
@@ -539,7 +544,8 @@
};
scifa5: serial at e6c80000 {
- compatible = "renesas,scifa-r8a7793", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7793",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
@@ -551,7 +557,8 @@
};
scifb0: serial at e6c20000 {
- compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7793",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
@@ -563,7 +570,8 @@
};
scifb1: serial at e6c30000 {
- compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7793",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
@@ -575,7 +583,8 @@
};
scifb2: serial at e6ce0000 {
- compatible = "renesas,scifb-r8a7793", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7793",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
@@ -587,7 +596,8 @@
};
scif0: serial at e6e60000 {
- compatible = "renesas,scif-r8a7793", "renesas,scif";
+ compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
@@ -599,7 +609,8 @@
};
scif1: serial at e6e68000 {
- compatible = "renesas,scif-r8a7793", "renesas,scif";
+ compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
@@ -611,7 +622,8 @@
};
scif2: serial at e6e58000 {
- compatible = "renesas,scif-r8a7793", "renesas,scif";
+ compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
@@ -623,7 +635,8 @@
};
scif3: serial at e6ea8000 {
- compatible = "renesas,scif-r8a7793", "renesas,scif";
+ compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
@@ -635,7 +648,8 @@
};
scif4: serial at e6ee0000 {
- compatible = "renesas,scif-r8a7793", "renesas,scif";
+ compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
@@ -647,7 +661,8 @@
};
scif5: serial at e6ee8000 {
- compatible = "renesas,scif-r8a7793", "renesas,scif";
+ compatible = "renesas,scif-r8a7793", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
@@ -659,7 +674,8 @@
};
hscif0: serial at e62c0000 {
- compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7793",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
@@ -671,7 +687,8 @@
};
hscif1: serial at e62c8000 {
- compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7793",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
@@ -683,7 +700,8 @@
};
hscif2: serial at e62d0000 {
- compatible = "renesas,hscif-r8a7793", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7793",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 46/70] ARM: dts: r8a7794: Add SCIF fallback compatibility strings
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 21be4bdc4001..a49bf303a02d 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -282,7 +282,8 @@
};
scifa0: serial@e6c40000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
@@ -294,7 +295,8 @@
};
scifa1: serial@e6c50000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
@@ -306,7 +308,8 @@
};
scifa2: serial@e6c60000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
@@ -318,7 +321,8 @@
};
scifa3: serial@e6c70000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
@@ -330,7 +334,8 @@
};
scifa4: serial@e6c78000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
@@ -342,7 +347,8 @@
};
scifa5: serial@e6c80000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
@@ -354,7 +360,8 @@
};
scifb0: serial@e6c20000 {
- compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7794",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
@@ -366,7 +373,8 @@
};
scifb1: serial@e6c30000 {
- compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7794",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
@@ -378,7 +386,8 @@
};
scifb2: serial@e6ce0000 {
- compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7794",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
@@ -390,7 +399,8 @@
};
scif0: serial@e6e60000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
@@ -402,7 +412,8 @@
};
scif1: serial@e6e68000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
@@ -414,7 +425,8 @@
};
scif2: serial@e6e58000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
@@ -426,7 +438,8 @@
};
scif3: serial@e6ea8000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
@@ -438,7 +451,8 @@
};
scif4: serial@e6ee0000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
@@ -450,7 +464,8 @@
};
scif5: serial@e6ee8000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
@@ -462,7 +477,8 @@
};
hscif0: serial@e62c0000 {
- compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7794",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
@@ -474,7 +490,8 @@
};
hscif1: serial@e62c8000 {
- compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7794",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
@@ -486,7 +503,8 @@
};
hscif2: serial@e62d0000 {
- compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7794",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 46/70] ARM: dts: r8a7794: Add SCIF fallback compatibility strings
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 21be4bdc4001..a49bf303a02d 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -282,7 +282,8 @@
};
scifa0: serial at e6c40000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
@@ -294,7 +295,8 @@
};
scifa1: serial at e6c50000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
@@ -306,7 +308,8 @@
};
scifa2: serial at e6c60000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
@@ -318,7 +321,8 @@
};
scifa3: serial at e6c70000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
@@ -330,7 +334,8 @@
};
scifa4: serial at e6c78000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
@@ -342,7 +347,8 @@
};
scifa5: serial at e6c80000 {
- compatible = "renesas,scifa-r8a7794", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7794",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
@@ -354,7 +360,8 @@
};
scifb0: serial at e6c20000 {
- compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7794",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
@@ -366,7 +373,8 @@
};
scifb1: serial at e6c30000 {
- compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7794",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
@@ -378,7 +386,8 @@
};
scifb2: serial at e6ce0000 {
- compatible = "renesas,scifb-r8a7794", "renesas,scifb";
+ compatible = "renesas,scifb-r8a7794",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
@@ -390,7 +399,8 @@
};
scif0: serial at e6e60000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
@@ -402,7 +412,8 @@
};
scif1: serial at e6e68000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
@@ -414,7 +425,8 @@
};
scif2: serial at e6e58000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
@@ -426,7 +438,8 @@
};
scif3: serial at e6ea8000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
@@ -438,7 +451,8 @@
};
scif4: serial at e6ee0000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
@@ -450,7 +464,8 @@
};
scif5: serial at e6ee8000 {
- compatible = "renesas,scif-r8a7794", "renesas,scif";
+ compatible = "renesas,scif-r8a7794", "renesas,rcar-gen2-scif",
+ "renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
@@ -462,7 +477,8 @@
};
hscif0: serial at e62c0000 {
- compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7794",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
@@ -474,7 +490,8 @@
};
hscif1: serial at e62c8000 {
- compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7794",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
@@ -486,7 +503,8 @@
};
hscif2: serial at e62d0000 {
- compatible = "renesas,hscif-r8a7794", "renesas,hscif";
+ compatible = "renesas,hscif-r8a7794",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 47/70] ARM: dts: sh73a0: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 453280c41d27..bf825ca4f6f7 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -359,7 +359,7 @@
reg = <0xe6c40000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -369,7 +369,7 @@
reg = <0xe6c50000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -379,7 +379,7 @@
reg = <0xe6c60000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -389,7 +389,7 @@
reg = <0xe6c70000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -399,7 +399,7 @@
reg = <0xe6c80000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -409,7 +409,7 @@
reg = <0xe6cb0000 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -419,7 +419,7 @@
reg = <0xe6cc0000 0x100>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -429,7 +429,7 @@
reg = <0xe6cd0000 0x100>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -439,7 +439,7 @@
reg = <0xe6c30000 0x100>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 47/70] ARM: dts: sh73a0: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/sh73a0.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 453280c41d27..bf825ca4f6f7 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -359,7 +359,7 @@
reg = <0xe6c40000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -369,7 +369,7 @@
reg = <0xe6c50000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -379,7 +379,7 @@
reg = <0xe6c60000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -389,7 +389,7 @@
reg = <0xe6c70000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -399,7 +399,7 @@
reg = <0xe6c80000 0x100>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -409,7 +409,7 @@
reg = <0xe6cb0000 0x100>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -419,7 +419,7 @@
reg = <0xe6cc0000 0x100>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -429,7 +429,7 @@
reg = <0xe6cd0000 0x100>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -439,7 +439,7 @@
reg = <0xe6c30000 0x100>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 48/70] ARM: dts: r7s72100: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index a5938c72d5bd..89e46ebef1bc 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -158,7 +158,7 @@
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -171,7 +171,7 @@
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -184,7 +184,7 @@
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -197,7 +197,7 @@
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -210,7 +210,7 @@
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -223,7 +223,7 @@
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -236,7 +236,7 @@
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -249,7 +249,7 @@
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 48/70] ARM: dts: r7s72100: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r7s72100.dtsi | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index a5938c72d5bd..89e46ebef1bc 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -158,7 +158,7 @@
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -171,7 +171,7 @@
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -184,7 +184,7 @@
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -197,7 +197,7 @@
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -210,7 +210,7 @@
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -223,7 +223,7 @@
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -236,7 +236,7 @@
<GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -249,7 +249,7 @@
<GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 49/70] ARM: dts: r8a73a4: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 64f3efcd7ba5..138414a7d170 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -335,7 +335,7 @@
reg = <0 0xe6c20000 0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -345,7 +345,7 @@
reg = <0 0xe6c30000 0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -355,7 +355,7 @@
reg = <0 0xe6c40000 0 0x100>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -365,7 +365,7 @@
reg = <0 0xe6c50000 0 0x100>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -375,7 +375,7 @@
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -385,7 +385,7 @@
reg = <0 0xe6cf0000 0 0x100>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_c4>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 49/70] ARM: dts: r8a73a4: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 64f3efcd7ba5..138414a7d170 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -335,7 +335,7 @@
reg = <0 0xe6c20000 0 0x100>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -345,7 +345,7 @@
reg = <0 0xe6c30000 0 0x100>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -355,7 +355,7 @@
reg = <0 0xe6c40000 0 0x100>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -365,7 +365,7 @@
reg = <0 0xe6c50000 0 0x100>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -375,7 +375,7 @@
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -385,7 +385,7 @@
reg = <0 0xe6cf0000 0 0x100>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A73A4_CLK_SCIFB3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_c4>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 50/70] ARM: dts: r8a7740: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (48 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (20 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7740.dtsi | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 36bcb39cca03..995fbda74b7a 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -214,7 +214,7 @@
reg = <0xe6c40000 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -224,7 +224,7 @@
reg = <0xe6c50000 0x100>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -234,7 +234,7 @@
reg = <0xe6c60000 0x100>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -244,7 +244,7 @@
reg = <0xe6c70000 0x100>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -254,7 +254,7 @@
reg = <0xe6c80000 0x100>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -264,7 +264,7 @@
reg = <0xe6cb0000 0x100>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -274,7 +274,7 @@
reg = <0xe6cc0000 0x100>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA6>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -284,7 +284,7 @@
reg = <0xe6cd0000 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFA7>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
@@ -294,7 +294,7 @@
reg = <0xe6c30000 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&pd_a3sp>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 51/70] ARM: dts: r8a7778: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 8ea1792c5146..50784e2b632d 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -302,7 +302,7 @@
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -313,7 +313,7 @@
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -324,7 +324,7 @@
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -335,7 +335,7 @@
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -346,7 +346,7 @@
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -357,7 +357,7 @@
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 51/70] ARM: dts: r8a7778: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 8ea1792c5146..50784e2b632d 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -302,7 +302,7 @@
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -313,7 +313,7 @@
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -324,7 +324,7 @@
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -335,7 +335,7 @@
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -346,7 +346,7 @@
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -357,7 +357,7 @@
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 52/70] ARM: dts: r8a7779: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 1671839f55a6..8fddfae13865 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -216,7 +216,7 @@
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -227,7 +227,7 @@
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -238,7 +238,7 @@
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -249,7 +249,7 @@
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -260,7 +260,7 @@
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -271,7 +271,7 @@
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 52/70] ARM: dts: r8a7779: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 1671839f55a6..8fddfae13865 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -216,7 +216,7 @@
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -227,7 +227,7 @@
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -238,7 +238,7 @@
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -249,7 +249,7 @@
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -260,7 +260,7 @@
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -271,7 +271,7 @@
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
power-domains = <&cpg_clocks>;
status = "disabled";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 53/70] ARM: dts: r8a7790: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (51 preceding siblings ...)
2016-02-04 14:29 ` Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 54/70] ARM: dts: r8a7791: " Simon Horman
` (17 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 1d94dfd53141..c5672745a1e5 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -590,7 +590,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -603,7 +603,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -616,7 +616,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -629,7 +629,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -642,7 +642,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -655,7 +655,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -668,7 +668,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -681,7 +681,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -694,7 +694,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -707,7 +707,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 54/70] ARM: dts: r8a7791: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (52 preceding siblings ...)
2016-02-04 14:29 ` [PATCH 53/70] ARM: dts: r8a7790: " Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` Simon Horman
` (16 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index e7537ba68b5e..194e9464b748 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -569,7 +569,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -582,7 +582,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -595,7 +595,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -608,7 +608,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -621,7 +621,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -634,7 +634,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -647,7 +647,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -660,7 +660,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -673,7 +673,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -686,7 +686,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -699,7 +699,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -712,7 +712,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -725,7 +725,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -738,7 +738,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -751,7 +751,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -764,7 +764,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -777,7 +777,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -790,7 +790,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 55/70] ARM: dts: r8a7793: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index b49f9271ceb3..07af584915c6 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -484,7 +484,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -497,7 +497,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -510,7 +510,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -523,7 +523,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -536,7 +536,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -549,7 +549,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -562,7 +562,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -575,7 +575,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -588,7 +588,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -601,7 +601,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -614,7 +614,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -627,7 +627,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -640,7 +640,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -653,7 +653,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -666,7 +666,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -679,7 +679,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -692,7 +692,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -705,7 +705,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 55/70] ARM: dts: r8a7793: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index b49f9271ceb3..07af584915c6 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -484,7 +484,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -497,7 +497,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -510,7 +510,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -523,7 +523,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -536,7 +536,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -549,7 +549,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -562,7 +562,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -575,7 +575,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -588,7 +588,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -601,7 +601,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -614,7 +614,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -627,7 +627,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -640,7 +640,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -653,7 +653,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -666,7 +666,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -679,7 +679,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -692,7 +692,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -705,7 +705,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 56/70] ARM: dts: r8a7794: Rename the serial port clock to fck
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Laurent Pinchart,
Geert Uytterhoeven, Simon Horman
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a49bf303a02d..b03a77b3d22f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -287,7 +287,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -300,7 +300,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -313,7 +313,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -326,7 +326,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -339,7 +339,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -352,7 +352,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -365,7 +365,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -378,7 +378,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -391,7 +391,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -404,7 +404,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -417,7 +417,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -430,7 +430,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -443,7 +443,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -456,7 +456,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -469,7 +469,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -482,7 +482,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -495,7 +495,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -508,7 +508,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 56/70] ARM: dts: r8a7794: Rename the serial port clock to fck
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index a49bf303a02d..b03a77b3d22f 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -287,7 +287,7 @@
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -300,7 +300,7 @@
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x25>, <&dmac0 0x26>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -313,7 +313,7 @@
reg = <0 0xe6c60000 0 64>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x27>, <&dmac0 0x28>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -326,7 +326,7 @@
reg = <0 0xe6c70000 0 64>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -339,7 +339,7 @@
reg = <0 0xe6c78000 0 64>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -352,7 +352,7 @@
reg = <0 0xe6c80000 0 64>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x23>, <&dmac0 0x24>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -365,7 +365,7 @@
reg = <0 0xe6c20000 0 64>;
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -378,7 +378,7 @@
reg = <0 0xe6c30000 0 64>;
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -391,7 +391,7 @@
reg = <0 0xe6ce0000 0 64>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -404,7 +404,7 @@
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -417,7 +417,7 @@
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -430,7 +430,7 @@
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -443,7 +443,7 @@
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -456,7 +456,7 @@
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -469,7 +469,7 @@
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -482,7 +482,7 @@
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -495,7 +495,7 @@
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -508,7 +508,7 @@
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 57/70] ARM: dts: r8a7778: Add BRG support for SCIF
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (S1 and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF device nodes.
This increases the range and accuracy of supported baud rates on SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 39 +++++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 50784e2b632d..f83a348fc07a 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -301,8 +301,9 @@
"renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF0>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -312,8 +313,9 @@
"renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF1>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -323,8 +325,9 @@
"renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF2>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -334,8 +337,9 @@
"renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF3>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -345,8 +349,9 @@
"renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF4>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -356,8 +361,9 @@
"renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF5>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -444,6 +450,15 @@
clock-output-names = "extal";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@ffc80000 {
compatible = "renesas,r8a7778-cpg-clocks";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 57/70] ARM: dts: r8a7778: Add BRG support for SCIF
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (S1 and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF device nodes.
This increases the range and accuracy of supported baud rates on SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778.dtsi | 39 +++++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 50784e2b632d..f83a348fc07a 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -301,8 +301,9 @@
"renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF0>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -312,8 +313,9 @@
"renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF1>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -323,8 +325,9 @@
"renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF2>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -334,8 +337,9 @@
"renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF3>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -345,8 +349,9 @@
"renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF4>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -356,8 +361,9 @@
"renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7778_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7778_CLK_SCIF5>,
+ <&cpg_clocks R8A7778_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -444,6 +450,15 @@
clock-output-names = "extal";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks at ffc80000 {
compatible = "renesas,r8a7778-cpg-clocks";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 58/70] ARM: dts: r8a7779: Add BRG support for SCIF
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (S1 and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF device nodes.
This increases the range and accuracy of supported baud rates on SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 39 +++++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 8fddfae13865..a0cc08e6295b 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -215,8 +215,9 @@
"renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -226,8 +227,9 @@
"renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -237,8 +239,9 @@
"renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -248,8 +251,9 @@
"renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -259,8 +263,9 @@
"renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -270,8 +275,9 @@
"renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -447,6 +453,15 @@
clock-output-names = "extal";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: clocks@ffc80000 {
compatible = "renesas,r8a7779-cpg-clocks";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 58/70] ARM: dts: r8a7779: Add BRG support for SCIF
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (S1 and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF device nodes.
This increases the range and accuracy of supported baud rates on SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 39 +++++++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 8fddfae13865..a0cc08e6295b 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -215,8 +215,9 @@
"renesas,scif";
reg = <0xffe40000 0x100>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF0>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -226,8 +227,9 @@
"renesas,scif";
reg = <0xffe41000 0x100>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF1>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -237,8 +239,9 @@
"renesas,scif";
reg = <0xffe42000 0x100>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF2>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -248,8 +251,9 @@
"renesas,scif";
reg = <0xffe43000 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF3>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -259,8 +263,9 @@
"renesas,scif";
reg = <0xffe44000 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF4>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -270,8 +275,9 @@
"renesas,scif";
reg = <0xffe45000 0x100>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp0_clks R8A7779_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp0_clks R8A7779_CLK_SCIF5>,
+ <&cpg_clocks R8A7779_CLK_S1>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
power-domains = <&cpg_clocks>;
status = "disabled";
};
@@ -447,6 +453,15 @@
clock-output-names = "extal";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: clocks at ffc80000 {
compatible = "renesas,r8a7779-cpg-clocks";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 59/70] ARM: dts: r8a7790: Add BRG support for (H)SCIF
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index c5672745a1e5..c9583fa6cae7 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -667,8 +667,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -680,8 +681,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -693,8 +695,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -706,8 +709,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -996,6 +1000,15 @@
clock-output-names = "audio_clk_c";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal_clk {
compatible = "fixed-clock";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 59/70] ARM: dts: r8a7790: Add BRG support for (H)SCIF
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 29 +++++++++++++++++++++--------
1 file changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index c5672745a1e5..c9583fa6cae7 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -667,8 +667,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -680,8 +681,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -693,8 +695,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -706,8 +709,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -996,6 +1000,15 @@
clock-output-names = "audio_clk_c";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal_clk {
compatible = "fixed-clock";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 60/70] ARM: dts: r8a7791: Add BRG support for (H)SCIF
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 194e9464b748..14aa62539ff2 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -685,8 +685,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -698,8 +699,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -711,8 +713,9 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -724,8 +727,9 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -737,8 +741,9 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -750,8 +755,9 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -763,8 +769,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -776,8 +783,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -789,8 +797,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -1049,6 +1058,15 @@
status = "disabled";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal_clk {
compatible = "fixed-clock";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 60/70] ARM: dts: r8a7791: Add BRG support for (H)SCIF
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 194e9464b748..14aa62539ff2 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -685,8 +685,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -698,8 +699,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -711,8 +713,9 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -724,8 +727,9 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -737,8 +741,9 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -750,8 +755,9 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -763,8 +769,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -776,8 +783,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -789,8 +797,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -1049,6 +1058,15 @@
status = "disabled";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* External USB clock - can be overridden by the board */
usb_extal_clk: usb_extal_clk {
compatible = "fixed-clock";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 61/70] ARM: dts: r8a7793: Add BRG support for SCIF
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 07af584915c6..45dba1c79a43 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -600,8 +600,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -613,8 +614,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -626,8 +628,9 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -639,8 +642,9 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -652,8 +656,9 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -665,8 +670,9 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -678,8 +684,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -691,8 +698,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -704,8 +712,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -805,6 +814,15 @@
clock-output-names = "audio_clk_c";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7793-cpg-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 61/70] ARM: dts: r8a7793: Add BRG support for SCIF
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 07af584915c6..45dba1c79a43 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -600,8 +600,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -613,8 +614,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -626,8 +628,9 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -639,8 +642,9 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -652,8 +656,9 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -665,8 +670,9 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -678,8 +684,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -691,8 +698,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -704,8 +712,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -805,6 +814,15 @@
clock-output-names = "audio_clk_c";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks at e6150000 {
compatible = "renesas,r8a7793-cpg-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 62/70] ARM: dts: r8a7794: Add BRG support for (H)SCIF
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b03a77b3d22f..7d4c5597af5b 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -403,8 +403,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -416,8 +417,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -429,8 +431,9 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -442,8 +445,9 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -455,8 +459,9 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -468,8 +473,9 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -481,8 +487,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -494,8 +501,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -507,8 +515,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -815,6 +824,15 @@
clock-output-names = "extal";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7794-cpg-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 62/70] ARM: dts: r8a7794: Add BRG support for (H)SCIF
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depends on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 54 ++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index b03a77b3d22f..7d4c5597af5b 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -403,8 +403,9 @@
"renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -416,8 +417,9 @@
"renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -429,8 +431,9 @@
"renesas,scif";
reg = <0 0xe6e58000 0 64>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -442,8 +445,9 @@
"renesas,scif";
reg = <0 0xe6ea8000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -455,8 +459,9 @@
"renesas,scif";
reg = <0 0xe6ee0000 0 64>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -468,8 +473,9 @@
"renesas,scif";
reg = <0 0xe6ee8000 0 64>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -481,8 +487,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c0000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -494,8 +501,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62c8000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -507,8 +515,9 @@
"renesas,rcar-gen2-hscif", "renesas,hscif";
reg = <0 0xe62d0000 0 96>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
- clock-names = "fck";
+ clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
dma-names = "tx", "rx";
power-domains = <&cpg_clocks>;
@@ -815,6 +824,15 @@
clock-output-names = "extal";
};
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks at e6150000 {
compatible = "renesas,r8a7794-cpg-clocks",
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 63/70] ARM: dts: alt: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 773f304d1142..ca9bc4fff287 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -103,6 +103,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
du_pins: du {
renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
renesas,function = "du";
@@ -113,6 +116,11 @@
renesas,function = "scif2";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -205,6 +213,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 63/70] ARM: dts: alt: Enable SCIF_CLK frequency and pins
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 773f304d1142..ca9bc4fff287 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -103,6 +103,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
du_pins: du {
renesas,groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
renesas,function = "du";
@@ -113,6 +116,11 @@
renesas,function = "scif2";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -205,6 +213,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 64/70] ARM: dts: bockw: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index a52b359e2ae2..21e3b9dda2da 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -126,11 +126,19 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
renesas,function = "scif0";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
mmc_pins: mmc {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
@@ -217,3 +225,8 @@
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 64/70] ARM: dts: bockw: Enable SCIF_CLK frequency and pins
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index a52b359e2ae2..21e3b9dda2da 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -126,11 +126,19 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
renesas,function = "scif0";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
mmc_pins: mmc {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
@@ -217,3 +225,8 @@
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 65/70] ARM: dts: gose: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:29 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 2fa052036dbc..cfe142c2ba38 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -236,6 +236,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
@@ -256,6 +259,11 @@
renesas,function = "scif1";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -316,6 +324,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 65/70] ARM: dts: gose: Enable SCIF_CLK frequency and pins
@ 2016-02-04 14:29 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:29 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793-gose.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 2fa052036dbc..cfe142c2ba38 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -236,6 +236,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
@@ -256,6 +259,11 @@
renesas,function = "scif1";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -316,6 +324,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&qspi {
pinctrl-0 = <&qspi_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 66/70] ARM: dts: koelsch: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:30 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates:
- SCIF:
- Supports now 50, 75, 110, 1152000, 1500000, 2000000, and
4000000 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000 bps.
- HSCIF:
- Supports now 50, 75, 110, 134, 150, and 200 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000, 1152000, 3000000, 3500000, and 4000000
bps.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 45256f3cc835..0ad71b81d3a2 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -320,6 +320,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
@@ -340,6 +343,11 @@
renesas,function = "scif1";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -440,6 +448,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 66/70] ARM: dts: koelsch: Enable SCIF_CLK frequency and pins
@ 2016-02-04 14:30 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates:
- SCIF:
- Supports now 50, 75, 110, 1152000, 1500000, 2000000, and
4000000 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000 bps.
- HSCIF:
- Supports now 50, 75, 110, 134, 150, and 200 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000, 1152000, 3000000, 3500000, and 4000000
bps.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 45256f3cc835..0ad71b81d3a2 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -320,6 +320,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
@@ -340,6 +343,11 @@
renesas,function = "scif1";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -440,6 +448,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 67/70] ARM: dts: lager: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:30 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790-lager.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 052dcee4790d..cdc0414f5f07 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -291,6 +291,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
du_pins: du {
renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
renesas,function = "du";
@@ -301,6 +304,11 @@
renesas,function = "scif0";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -485,6 +493,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&msiof1 {
pinctrl-0 = <&msiof1_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 67/70] ARM: dts: lager: Enable SCIF_CLK frequency and pins
@ 2016-02-04 14:30 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790-lager.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 052dcee4790d..cdc0414f5f07 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -291,6 +291,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
du_pins: du {
renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
renesas,function = "du";
@@ -301,6 +304,11 @@
renesas,function = "scif0";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -485,6 +493,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&msiof1 {
pinctrl-0 = <&msiof1_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 68/70] ARM: dts: marzen: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
@ 2016-02-04 14:30 ` Simon Horman
2016-02-04 14:28 ` Simon Horman
` (69 subsequent siblings)
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index fe396c8d58db..e111d35d02ae 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -165,6 +165,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
du_pins: du {
du0 {
renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
@@ -176,6 +179,11 @@
};
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk_b";
+ renesas,function = "scif_clk";
+ };
+
ethernet_pins: ethernet {
intc {
renesas,groups = "intc_irq1_b";
@@ -222,6 +230,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
@ 2016-02-04 14:30 Simon Horman
2016-02-04 14:28 ` [PATCH 01/70] ARM: dts: gose: Add GPIO keys to DT Simon Horman
` (70 more replies)
0 siblings, 71 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these Renesas ARM based SoC DT updates for v4.6.
The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
----------------------------------------------------------------
Renesas ARM Based SoC DT Updates for v4.6
* Use SCIF and USBHS fallback compatibility strings
* Add Baud Rate Generator (BRG) support for (H)SCIF
* Enable SCIF_CLK frequency and pins
* Use GIC_* defines
* Migrate to generic l2c OF initialization on r8a7740
* Enable audio on r8a7793/gose
* Enable HDMI vidio out on r8a7793
* Enable i2c on r8a7793/gose
* Enable QSPI on alt
* Enable GPIO keys and leds on gise
* Enable audio on porter
* Enable DU on porter
----------------------------------------------------------------
Geert Uytterhoeven (22):
ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
ARM: dts: r8a7778: Add SCIF fallback compatibility strings
ARM: dts: r8a7779: Add SCIF fallback compatibility strings
ARM: dts: r8a7790: Add SCIF fallback compatibility strings
ARM: dts: r8a7791: Add SCIF fallback compatibility strings
ARM: dts: r8a7793: Add SCIF fallback compatibility strings
ARM: dts: r8a7794: Add SCIF fallback compatibility strings
ARM: dts: r8a7778: Add BRG support for SCIF
ARM: dts: r8a7779: Add BRG support for SCIF
ARM: dts: r8a7790: Add BRG support for (H)SCIF
ARM: dts: r8a7791: Add BRG support for (H)SCIF
ARM: dts: r8a7793: Add BRG support for SCIF
ARM: dts: r8a7794: Add BRG support for (H)SCIF
ARM: dts: alt: Enable SCIF_CLK frequency and pins
ARM: dts: bockw: Enable SCIF_CLK frequency and pins
ARM: dts: gose: Enable SCIF_CLK frequency and pins
ARM: dts: koelsch: Enable SCIF_CLK frequency and pins
ARM: dts: lager: Enable SCIF_CLK frequency and pins
ARM: dts: marzen: Enable SCIF_CLK frequency and pins
ARM: dts: porter: Enable SCIF_CLK frequency and pins
ARM: dts: silk: Enable SCIF_CLK frequency and pins
Laurent Pinchart (11):
ARM: dts: r8a7793: Add I2C master nodes to DT
ARM: dts: sh73a0: Rename the serial port clock to fck
ARM: dts: r7s72100: Rename the serial port clock to fck
ARM: dts: r8a73a4: Rename the serial port clock to fck
ARM: dts: r8a7740: Rename the serial port clock to fck
ARM: dts: r8a7778: Rename the serial port clock to fck
ARM: dts: r8a7779: Rename the serial port clock to fck
ARM: dts: r8a7790: Rename the serial port clock to fck
ARM: dts: r8a7791: Rename the serial port clock to fck
ARM: dts: r8a7793: Rename the serial port clock to fck
ARM: dts: r8a7794: Rename the serial port clock to fck
Magnus Damm (1):
ARM: dts: r8a7793: gose: Add HDMI video out support
Sergei Shtylyov (3):
ARM: dts: porter: add DU DT support
ARM: dts: silk: add DU DT support
ARM: dts: porter: add sound support
Simon Horman (33):
ARM: dts: gose: Add GPIO keys to DT
ARM: dts: gose: Add GPIO leds to DT
ARM: dts: alt: Add QSPI device to DT
ARM: dts: r8a7790: use fallback usbhs compatibility string
ARM: dts: r8a7791: use fallback usbhs compatibility string
ARM: dts: r8a7794: use fallback usbhs compatibility string
ARM: dts: r8a7793: move dmac nodes
ARM: dts: gose: add i2c2 bus to device tree
ARM: dts: r8a7790: use GIC_* defines
ARM: dts: r8a7791: use GIC_* defines
ARM: dts: r8a7793: use GIC_* defines
ARM: dts: r8a7794: use GIC_* defines
ARM: dts: r8a7778: use GIC_* defines
ARM: dts: r8a7779: use GIC_* defines
ARM: dts: r8a73a4: use GIC_* defines
ARM: dts: r8a7740: use GIC_* defines
ARM: dts: r8a7793: add MSTP10 clocks to device tree
ARM: dts: r8a7793: add audio clock to device tree
ARM: dts: r8a7793: add m2 clock to device tree
ARM: dts: r8a7793: add R-Car sound support to device tree
ARM: dts: r8a7793: add DVC support to device tree
ARM: dts: r8a7793: add audio DMAC clocks to device tree
ARM: dts: r8a7793: add audio DMAC to device tree
ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver
ARM: dts: gose: Enable sound PIO support in device tree
ARM: dts: gose: enable sound DMA support in device tree
ARM: dts: gose: enable sound DMA support via BUSIF in device tree
ARM: dts: gose: enable sound DMA support via SRC in device tree
ARM: dts: gose: enable sound DMA support via DVC in device tree
ARM: dts: r8a7793: enable audio DMAC in device tree
ARM: dts: r7s72100: use GIC_* defines
ARM: dts: sh73a0: use GIC_* defines
ARM: dts: emev2: use GIC_* defines
arch/arm/boot/dts/emev2.dtsi | 39 +-
arch/arm/boot/dts/r7s72100.dtsi | 177 +++----
arch/arm/boot/dts/r8a73a4.dtsi | 224 ++++-----
arch/arm/boot/dts/r8a7740.dtsi | 161 +++----
arch/arm/boot/dts/r8a7778-bockw.dts | 13 +
arch/arm/boot/dts/r8a7778.dtsi | 144 +++---
arch/arm/boot/dts/r8a7779-marzen.dts | 13 +
arch/arm/boot/dts/r8a7779.dtsi | 135 +++---
arch/arm/boot/dts/r8a7790-lager.dts | 13 +
arch/arm/boot/dts/r8a7790.dtsi | 441 +++++++++--------
arch/arm/boot/dts/r8a7791-koelsch.dts | 13 +
arch/arm/boot/dts/r8a7791-porter.dts | 165 +++++++
arch/arm/boot/dts/r8a7791.dtsi | 514 ++++++++++----------
arch/arm/boot/dts/r8a7793-gose.dts | 304 ++++++++++++
arch/arm/boot/dts/r8a7793.dtsi | 758 ++++++++++++++++++++++++------
arch/arm/boot/dts/r8a7794-alt.dts | 59 +++
arch/arm/boot/dts/r8a7794-silk.dts | 122 +++++
arch/arm/boot/dts/r8a7794.dtsi | 362 +++++++-------
arch/arm/boot/dts/sh73a0.dtsi | 186 ++++----
arch/arm/mach-shmobile/setup-r8a7740.c | 18 +-
include/dt-bindings/clock/r8a7793-clock.h | 2 +
21 files changed, 2571 insertions(+), 1292 deletions(-)
^ permalink raw reply [flat|nested] 127+ messages in thread
* [PATCH 68/70] ARM: dts: marzen: Enable SCIF_CLK frequency and pins
@ 2016-02-04 14:30 ` Simon Horman
0 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779-marzen.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index fe396c8d58db..e111d35d02ae 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -165,6 +165,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
du_pins: du {
du0 {
renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
@@ -176,6 +179,11 @@
};
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk_b";
+ renesas,function = "scif_clk";
+ };
+
ethernet_pins: ethernet {
intc {
renesas,groups = "intc_irq1_b";
@@ -222,6 +230,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 69/70] ARM: dts: porter: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (67 preceding siblings ...)
2016-02-04 14:30 ` Simon Horman
@ 2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 70/70] ARM: dts: silk: " Simon Horman
2016-02-08 21:51 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791-porter.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 5015eaa0ae50..ed1f6f884e2b 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -143,11 +143,19 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -221,6 +229,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
ðer {
pinctrl-0 = <ðer_pins &phy1_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [PATCH 70/70] ARM: dts: silk: Enable SCIF_CLK frequency and pins
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (68 preceding siblings ...)
2016-02-04 14:30 ` [PATCH 69/70] ARM: dts: porter: " Simon Horman
@ 2016-02-04 14:30 ` Simon Horman
2016-02-08 21:51 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
70 siblings, 0 replies; 127+ messages in thread
From: Simon Horman @ 2016-02-04 14:30 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-silk.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 98b8bcca84da..66f077a3ca41 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -126,11 +126,19 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif2_pins: serial2 {
renesas,groups = "scif2_data";
renesas,function = "scif2";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -184,6 +192,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
ðer {
pinctrl-0 = <ðer_pins &phy1_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
` (69 preceding siblings ...)
2016-02-04 14:30 ` [PATCH 70/70] ARM: dts: silk: " Simon Horman
@ 2016-02-08 21:51 ` Olof Johansson
2016-02-09 7:39 ` Geert Uytterhoeven
70 siblings, 1 reply; 127+ messages in thread
From: Olof Johansson @ 2016-02-08 21:51 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these Renesas ARM based SoC DT updates for v4.6.
>
>
> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
>
> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
>
> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
>
> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
>
> ----------------------------------------------------------------
> Renesas ARM Based SoC DT Updates for v4.6
>
> * Use SCIF and USBHS fallback compatibility strings
> * Add Baud Rate Generator (BRG) support for (H)SCIF
> * Enable SCIF_CLK frequency and pins
> * Use GIC_* defines
> * Migrate to generic l2c OF initialization on r8a7740
> * Enable audio on r8a7793/gose
> * Enable HDMI vidio out on r8a7793
> * Enable i2c on r8a7793/gose
> * Enable QSPI on alt
> * Enable GPIO keys and leds on gise
> * Enable audio on porter
> * Enable DU on porter
>
> ----------------------------------------------------------------
> Geert Uytterhoeven (22):
> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert
L2 init to DT earlier in this branch, which makes this look like it's just
a generic cleanup that should go in independently in your cleanup branch.
Or am I missing some dependency that isn't obvious? If I'm not, then please
respin this branch and move those to the place they belong (cleanup).
Thanks!
-Olof
^ permalink raw reply [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
2016-02-08 21:51 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
@ 2016-02-09 7:39 ` Geert Uytterhoeven
2016-02-09 18:39 ` Simon Horman
0 siblings, 1 reply; 127+ messages in thread
From: Geert Uytterhoeven @ 2016-02-09 7:39 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof,
On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote:
> On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote:
>> Please consider these Renesas ARM based SoC DT updates for v4.6.
>>
>>
>> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
>>
>> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
>>
>> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
>>
>> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
>>
>> ----------------------------------------------------------------
>> Renesas ARM Based SoC DT Updates for v4.6
>>
>> * Use SCIF and USBHS fallback compatibility strings
>> * Add Baud Rate Generator (BRG) support for (H)SCIF
>> * Enable SCIF_CLK frequency and pins
>> * Use GIC_* defines
>> * Migrate to generic l2c OF initialization on r8a7740
>> * Enable audio on r8a7793/gose
>> * Enable HDMI vidio out on r8a7793
>> * Enable i2c on r8a7793/gose
>> * Enable QSPI on alt
>> * Enable GPIO keys and leds on gise
>> * Enable audio on porter
>> * Enable DU on porter
>>
>> ----------------------------------------------------------------
>> Geert Uytterhoeven (22):
>> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
>> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
>
> Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert
> L2 init to DT earlier in this branch, which makes this look like it's just
> a generic cleanup that should go in independently in your cleanup branch.
>
> Or am I missing some dependency that isn't obvious? If I'm not, then please
> respin this branch and move those to the place they belong (cleanup).
The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add
L2 cache-controller node"), which has already entered mainline in v4.5-rc1.
So I agree with your comments.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
2016-02-09 7:39 ` Geert Uytterhoeven
@ 2016-02-09 18:39 ` Simon Horman
2016-02-11 3:55 ` Olof Johansson
0 siblings, 1 reply; 127+ messages in thread
From: Simon Horman @ 2016-02-09 18:39 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote:
> Hi Olof,
>
> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote:
> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote:
> >> Please consider these Renesas ARM based SoC DT updates for v4.6.
> >>
> >>
> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
> >>
> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
> >>
> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
> >>
> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
> >>
> >> ----------------------------------------------------------------
> >> Renesas ARM Based SoC DT Updates for v4.6
> >>
> >> * Use SCIF and USBHS fallback compatibility strings
> >> * Add Baud Rate Generator (BRG) support for (H)SCIF
> >> * Enable SCIF_CLK frequency and pins
> >> * Use GIC_* defines
> >> * Migrate to generic l2c OF initialization on r8a7740
> >> * Enable audio on r8a7793/gose
> >> * Enable HDMI vidio out on r8a7793
> >> * Enable i2c on r8a7793/gose
> >> * Enable QSPI on alt
> >> * Enable GPIO keys and leds on gise
> >> * Enable audio on porter
> >> * Enable DU on porter
> >>
> >> ----------------------------------------------------------------
> >> Geert Uytterhoeven (22):
> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
> >
> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert
> > L2 init to DT earlier in this branch, which makes this look like it's just
> > a generic cleanup that should go in independently in your cleanup branch.
> >
> > Or am I missing some dependency that isn't obvious? If I'm not, then please
> > respin this branch and move those to the place they belong (cleanup).
>
> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add
> L2 cache-controller node"), which has already entered mainline in v4.5-rc1.
>
> So I agree with your comments.
Sorry for the mix-up.
I'll see about respinning this.
^ permalink raw reply [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
2016-02-09 18:39 ` Simon Horman
@ 2016-02-11 3:55 ` Olof Johansson
2016-02-11 17:22 ` Simon Horman
0 siblings, 1 reply; 127+ messages in thread
From: Olof Johansson @ 2016-02-11 3:55 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote:
>> Hi Olof,
>>
>> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote:
>> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote:
>> >> Please consider these Renesas ARM based SoC DT updates for v4.6.
>> >>
>> >>
>> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
>> >>
>> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
>> >>
>> >> are available in the git repository at:
>> >>
>> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
>> >>
>> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
>> >>
>> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
>> >>
>> >> ----------------------------------------------------------------
>> >> Renesas ARM Based SoC DT Updates for v4.6
>> >>
>> >> * Use SCIF and USBHS fallback compatibility strings
>> >> * Add Baud Rate Generator (BRG) support for (H)SCIF
>> >> * Enable SCIF_CLK frequency and pins
>> >> * Use GIC_* defines
>> >> * Migrate to generic l2c OF initialization on r8a7740
>> >> * Enable audio on r8a7793/gose
>> >> * Enable HDMI vidio out on r8a7793
>> >> * Enable i2c on r8a7793/gose
>> >> * Enable QSPI on alt
>> >> * Enable GPIO keys and leds on gise
>> >> * Enable audio on porter
>> >> * Enable DU on porter
>> >>
>> >> ----------------------------------------------------------------
>> >> Geert Uytterhoeven (22):
>> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
>> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
>> >
>> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert
>> > L2 init to DT earlier in this branch, which makes this look like it's just
>> > a generic cleanup that should go in independently in your cleanup branch.
>> >
>> > Or am I missing some dependency that isn't obvious? If I'm not, then please
>> > respin this branch and move those to the place they belong (cleanup).
>>
>> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add
>> L2 cache-controller node"), which has already entered mainline in v4.5-rc1.
>>
>> So I agree with your comments.
>
> Sorry for the mix-up.
> I'll see about respinning this.
I've merged the patches, so respinning won't work. Instead, please
follow up with incremental fixes instead.
-Olof
^ permalink raw reply [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
2016-02-11 3:55 ` Olof Johansson
@ 2016-02-11 17:22 ` Simon Horman
2016-02-11 21:22 ` Olof Johansson
0 siblings, 1 reply; 127+ messages in thread
From: Simon Horman @ 2016-02-11 17:22 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Feb 10, 2016 at 07:55:30PM -0800, Olof Johansson wrote:
> Hi,
>
> On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote:
> >> Hi Olof,
> >>
> >> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote:
> >> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote:
> >> >> Please consider these Renesas ARM based SoC DT updates for v4.6.
> >> >>
> >> >>
> >> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
> >> >>
> >> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
> >> >>
> >> >> are available in the git repository at:
> >> >>
> >> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
> >> >>
> >> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
> >> >>
> >> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
> >> >>
> >> >> ----------------------------------------------------------------
> >> >> Renesas ARM Based SoC DT Updates for v4.6
> >> >>
> >> >> * Use SCIF and USBHS fallback compatibility strings
> >> >> * Add Baud Rate Generator (BRG) support for (H)SCIF
> >> >> * Enable SCIF_CLK frequency and pins
> >> >> * Use GIC_* defines
> >> >> * Migrate to generic l2c OF initialization on r8a7740
> >> >> * Enable audio on r8a7793/gose
> >> >> * Enable HDMI vidio out on r8a7793
> >> >> * Enable i2c on r8a7793/gose
> >> >> * Enable QSPI on alt
> >> >> * Enable GPIO keys and leds on gise
> >> >> * Enable audio on porter
> >> >> * Enable DU on porter
> >> >>
> >> >> ----------------------------------------------------------------
> >> >> Geert Uytterhoeven (22):
> >> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
> >> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
> >> >
> >> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert
> >> > L2 init to DT earlier in this branch, which makes this look like it's just
> >> > a generic cleanup that should go in independently in your cleanup branch.
> >> >
> >> > Or am I missing some dependency that isn't obvious? If I'm not, then please
> >> > respin this branch and move those to the place they belong (cleanup).
> >>
> >> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add
> >> L2 cache-controller node"), which has already entered mainline in v4.5-rc1.
> >>
> >> So I agree with your comments.
> >
> > Sorry for the mix-up.
> > I'll see about respinning this.
>
> I've merged the patches, so respinning won't work. Instead, please
> follow up with incremental fixes instead.
Hi Olof,
sorry once again for the mix-up.
If you have already pulled this pull request then I am happy.
However, I don't see it in the arm-soc tree and if you haven't pulled it
and it isn't too much trouble I would like to re-spin as I have a further
r8a7740 cleanup in the pipeline.
^ permalink raw reply [flat|nested] 127+ messages in thread
* [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6
2016-02-11 17:22 ` Simon Horman
@ 2016-02-11 21:22 ` Olof Johansson
0 siblings, 0 replies; 127+ messages in thread
From: Olof Johansson @ 2016-02-11 21:22 UTC (permalink / raw)
To: linux-arm-kernel
Simon,
On Thu, Feb 11, 2016 at 9:22 AM, Simon Horman <horms@verge.net.au> wrote:
> On Wed, Feb 10, 2016 at 07:55:30PM -0800, Olof Johansson wrote:
>> Hi,
>>
>> On Tue, Feb 9, 2016 at 10:39 AM, Simon Horman <horms@verge.net.au> wrote:
>> > On Tue, Feb 09, 2016 at 08:39:31AM +0100, Geert Uytterhoeven wrote:
>> >> Hi Olof,
>> >>
>> >> On Mon, Feb 8, 2016 at 10:51 PM, Olof Johansson <olof@lixom.net> wrote:
>> >> > On Thu, Feb 04, 2016 at 03:30:02PM +0100, Simon Horman wrote:
>> >> >> Please consider these Renesas ARM based SoC DT updates for v4.6.
>> >> >>
>> >> >>
>> >> >> The following changes since commit 92e963f50fc74041b5e9e744c330dca48e04f08d:
>> >> >>
>> >> >> Linux 4.5-rc1 (2016-01-24 13:06:47 -0800)
>> >> >>
>> >> >> are available in the git repository at:
>> >> >>
>> >> >> git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.6
>> >> >>
>> >> >> for you to fetch changes up to d7a11140d0a659e5c1f83627792f95b6713030a2:
>> >> >>
>> >> >> ARM: dts: silk: Enable SCIF_CLK frequency and pins (2016-02-02 14:02:28 +0100)
>> >> >>
>> >> >> ----------------------------------------------------------------
>> >> >> Renesas ARM Based SoC DT Updates for v4.6
>> >> >>
>> >> >> * Use SCIF and USBHS fallback compatibility strings
>> >> >> * Add Baud Rate Generator (BRG) support for (H)SCIF
>> >> >> * Enable SCIF_CLK frequency and pins
>> >> >> * Use GIC_* defines
>> >> >> * Migrate to generic l2c OF initialization on r8a7740
>> >> >> * Enable audio on r8a7793/gose
>> >> >> * Enable HDMI vidio out on r8a7793
>> >> >> * Enable i2c on r8a7793/gose
>> >> >> * Enable QSPI on alt
>> >> >> * Enable GPIO keys and leds on gise
>> >> >> * Enable audio on porter
>> >> >> * Enable DU on porter
>> >> >>
>> >> >> ----------------------------------------------------------------
>> >> >> Geert Uytterhoeven (22):
>> >> >> ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization
>> >> >> ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers
>> >> >
>> >> > Hmm. Those aren't DT changes. There's also nothing for r8a7740 to convert
>> >> > L2 init to DT earlier in this branch, which makes this look like it's just
>> >> > a generic cleanup that should go in independently in your cleanup branch.
>> >> >
>> >> > Or am I missing some dependency that isn't obvious? If I'm not, then please
>> >> > respin this branch and move those to the place they belong (cleanup).
>> >>
>> >> The dependency is commit 374e70075e58acfe ("ARM: shmobile: r8a7740 dtsi: Add
>> >> L2 cache-controller node"), which has already entered mainline in v4.5-rc1.
>> >>
>> >> So I agree with your comments.
>> >
>> > Sorry for the mix-up.
>> > I'll see about respinning this.
>>
>> I've merged the patches, so respinning won't work. Instead, please
>> follow up with incremental fixes instead.
>
> Hi Olof,
>
> sorry once again for the mix-up.
>
> If you have already pulled this pull request then I am happy.
> However, I don't see it in the arm-soc tree and if you haven't pulled it
> and it isn't too much trouble I would like to re-spin as I have a further
> r8a7740 cleanup in the pipeline.
Sorry for the confusion, my reply went to the wrong thread somehow.
-Olof
^ permalink raw reply [flat|nested] 127+ messages in thread
end of thread, other threads:[~2016-02-11 21:22 UTC | newest]
Thread overview: 127+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-04 14:30 [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Simon Horman
2016-02-04 14:28 ` [PATCH 01/70] ARM: dts: gose: Add GPIO keys to DT Simon Horman
2016-02-04 14:28 ` [PATCH 02/70] ARM: dts: gose: Add GPIO leds " Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` [PATCH 03/70] ARM: dts: porter: add DU DT support Simon Horman
2016-02-04 14:28 ` [PATCH 04/70] ARM: dts: r8a7793: Add I2C master nodes to DT Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:28 ` [PATCH 05/70] ARM: dts: alt: Add QSPI device " Simon Horman
2016-02-04 14:28 ` Simon Horman
2016-02-04 14:29 ` [PATCH 06/70] ARM: dts: r8a7790: use fallback usbhs compatibility string Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 07/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 08/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` [PATCH 09/70] ARM: dts: r8a7793: move dmac nodes Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 10/70] ARM: dts: gose: add i2c2 bus to device tree Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 11/70] ARM: dts: r8a7790: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 12/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` [PATCH 13/70] ARM: dts: silk: add DU DT support Simon Horman
2016-02-04 14:29 ` [PATCH 14/70] ARM: dts: r8a7793: use GIC_* defines Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 15/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 16/70] ARM: dts: r8a7793: gose: Add HDMI video out support Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 17/70] ARM: dts: r8a7778: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 18/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` [PATCH 19/70] ARM: dts: porter: add sound support Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 20/70] ARM: dts: r8a73a4: use GIC_* defines Simon Horman
2016-02-04 14:29 ` [PATCH 21/70] ARM: dts: r8a7740: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 22/70] ARM: dts: r8a7793: add MSTP10 clocks to device tree Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 23/70] ARM: dts: r8a7793: add audio clock " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 24/70] ARM: dts: r8a7793: add m2 " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 25/70] ARM: dts: r8a7793: add R-Car sound support " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 26/70] ARM: dts: r8a7793: add DVC " Simon Horman
2016-02-04 14:29 ` [PATCH 27/70] ARM: dts: r8a7793: add audio DMAC clocks " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 28/70] ARM: dts: r8a7793: add audio DMAC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 29/70] ARM: dts: r8a7793: enable Audio DMAC peri peri via sound driver Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 30/70] ARM: dts: gose: Enable sound PIO support in device tree Simon Horman
2016-02-04 14:29 ` [PATCH 31/70] ARM: dts: gose: enable sound DMA " Simon Horman
2016-02-04 14:29 ` [PATCH 32/70] ARM: dts: gose: enable sound DMA support via BUSIF " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 33/70] ARM: dts: gose: enable sound DMA support via SRC " Simon Horman
2016-02-04 14:29 ` [PATCH 34/70] ARM: dts: gose: enable sound DMA support via DVC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 35/70] ARM: dts: r8a7793: enable audio DMAC " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 36/70] ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 37/70] ARM: shmobile: r8a7740: Remove mapping of L2 cache controller registers Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 38/70] ARM: dts: r7s72100: use GIC_* defines Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 39/70] ARM: dts: sh73a0: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 40/70] ARM: dts: emev2: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 41/70] ARM: dts: r8a7778: Add SCIF fallback compatibility strings Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 42/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 43/70] ARM: dts: r8a7790: " Simon Horman
2016-02-04 14:29 ` [PATCH 44/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 45/70] ARM: dts: r8a7793: " Simon Horman
2016-02-04 14:29 ` [PATCH 46/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 47/70] ARM: dts: sh73a0: Rename the serial port clock to fck Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 48/70] ARM: dts: r7s72100: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 49/70] ARM: dts: r8a73a4: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 50/70] ARM: dts: r8a7740: " Simon Horman
2016-02-04 14:29 ` [PATCH 51/70] ARM: dts: r8a7778: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 52/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 53/70] ARM: dts: r8a7790: " Simon Horman
2016-02-04 14:29 ` [PATCH 54/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` [PATCH 55/70] ARM: dts: r8a7793: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 56/70] ARM: dts: r8a7794: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 57/70] ARM: dts: r8a7778: Add BRG support for SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 58/70] ARM: dts: r8a7779: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 59/70] ARM: dts: r8a7790: Add BRG support for (H)SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 60/70] ARM: dts: r8a7791: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 61/70] ARM: dts: r8a7793: Add BRG support for SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 62/70] ARM: dts: r8a7794: Add BRG support for (H)SCIF Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 63/70] ARM: dts: alt: Enable SCIF_CLK frequency and pins Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 64/70] ARM: dts: bockw: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:29 ` [PATCH 65/70] ARM: dts: gose: " Simon Horman
2016-02-04 14:29 ` Simon Horman
2016-02-04 14:30 ` [PATCH 66/70] ARM: dts: koelsch: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 67/70] ARM: dts: lager: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 68/70] ARM: dts: marzen: " Simon Horman
2016-02-04 14:30 ` Simon Horman
2016-02-04 14:30 ` [PATCH 69/70] ARM: dts: porter: " Simon Horman
2016-02-04 14:30 ` [PATCH 70/70] ARM: dts: silk: " Simon Horman
2016-02-08 21:51 ` [GIT PULL] Renesas ARM Based SoC DT Updates for v4.6 Olof Johansson
2016-02-09 7:39 ` Geert Uytterhoeven
2016-02-09 18:39 ` Simon Horman
2016-02-11 3:55 ` Olof Johansson
2016-02-11 17:22 ` Simon Horman
2016-02-11 21:22 ` Olof Johansson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.