From: Michael Trimarchi <michael@amarulasolutions.com> To: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <fabio.estevam@freescale.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, Brian Norris <computersforpeace@gmail.com>, linux-arm-kernel <linux-arm-kernel@lists.infradead.org>, Sascha Hauer <kernel@pengutronix.de> Subject: Re: [PATCH 0/4] Add support for Engicam IMX6UL module Date: Wed, 30 Mar 2016 14:46:31 +0200 [thread overview] Message-ID: <CAOf5uwkFoi3_RojUpCsyR3v6EYVahHfjA4MWwEVimtfBhWY9nQ@mail.gmail.com> (raw) In-Reply-To: <20160330114748.GF28207@tiger> Hi On Wed, Mar 30, 2016 at 1:47 PM, Shawn Guo <shawnguo@kernel.org> wrote: > On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote: >> Thi patch series add the support for Engicam IMXUL product >> >> https://community.freescale.com/docs/DOC-328428 >> >> Based on Freescale™ i.MX 6UltraLite processor, a high performance, >> ultra-efficient processor family featuring an advanced implementation >> of a single ARM™ Cortex™-A7 core, which operates at speeds up to 528 MHz. >> >> The new ENGICAM GEA M6UL module is suitable for cost effective HMI >> applications requiring high performance CPU. >> >> Michael Trimarchi (4): >> ARM: dts: imx6ul: Add flexcan1 and flexcan2 support >> ARM: dts: imx6ul: Add LCDIF support >> ARM: dts: imx6ul: Add GPMI nand controller support >> ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support > > There are quite some changes around imx6ul.dtsi getting into 4.6-rc1. > Can you please rebase onto 4.6-rc1 and resend? > I will prepare tonight again, let test them tomorrow and send back tomorrow evening Michael > Shawn > >> >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++ >> arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++ >> arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++ >> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 + >> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +- >> 6 files changed, 557 insertions(+), 3 deletions(-) >> create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts >> create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi >> >> -- >> 2.7.0 >> >> -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com | _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: michael@amarulasolutions.com (Michael Trimarchi) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 0/4] Add support for Engicam IMX6UL module Date: Wed, 30 Mar 2016 14:46:31 +0200 [thread overview] Message-ID: <CAOf5uwkFoi3_RojUpCsyR3v6EYVahHfjA4MWwEVimtfBhWY9nQ@mail.gmail.com> (raw) In-Reply-To: <20160330114748.GF28207@tiger> Hi On Wed, Mar 30, 2016 at 1:47 PM, Shawn Guo <shawnguo@kernel.org> wrote: > On Sat, Feb 20, 2016 at 11:20:48AM +0100, Michael Trimarchi wrote: >> Thi patch series add the support for Engicam IMXUL product >> >> https://community.freescale.com/docs/DOC-328428 >> >> Based on Freescale? i.MX 6UltraLite processor, a high performance, >> ultra-efficient processor family featuring an advanced implementation >> of a single ARM? Cortex?-A7 core, which operates at speeds up to 528 MHz. >> >> The new ENGICAM GEA M6UL module is suitable for cost effective HMI >> applications requiring high performance CPU. >> >> Michael Trimarchi (4): >> ARM: dts: imx6ul: Add flexcan1 and flexcan2 support >> ARM: dts: imx6ul: Add LCDIF support >> ARM: dts: imx6ul: Add GPMI nand controller support >> ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support > > There are quite some changes around imx6ul.dtsi getting into 4.6-rc1. > Can you please rebase onto 4.6-rc1 and resend? > I will prepare tonight again, let test them tomorrow and send back tomorrow evening Michael > Shawn > >> >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/imx6ul-geam-kit.dts | 102 +++++++++ >> arch/arm/boot/dts/imx6ul-geam.dtsi | 371 +++++++++++++++++++++++++++++++++ >> arch/arm/boot/dts/imx6ul.dtsi | 68 ++++++ >> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 10 + >> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 6 +- >> 6 files changed, 557 insertions(+), 3 deletions(-) >> create mode 100644 arch/arm/boot/dts/imx6ul-geam-kit.dts >> create mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi >> >> -- >> 2.7.0 >> >> -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |
next prev parent reply other threads:[~2016-03-30 12:46 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-20 10:20 [PATCH 0/4] Add support for Engicam IMX6UL module Michael Trimarchi 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-1-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 10:20 ` [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support Michael Trimarchi 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-2-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 14:02 ` Fabio Estevam 2016-02-20 14:02 ` Fabio Estevam [not found] ` <CAOMZO5Bk_ZMhYzFLRFNK2TQvK4KHuj62AM_6uF-m-P1kJupTHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-02-20 17:18 ` Michael Trimarchi 2016-02-20 17:18 ` Michael Trimarchi 2016-02-20 17:29 ` Fabio Estevam 2016-02-20 17:29 ` Fabio Estevam 2016-02-21 11:18 ` [PATCH V2 " Michael Trimarchi 2016-02-21 11:18 ` Michael Trimarchi 2016-02-20 10:20 ` [PATCH 2/4] ARM: dts: imx6ul: Add LCDIF support Michael Trimarchi 2016-02-20 10:20 ` Michael Trimarchi 2016-02-20 10:20 ` [PATCH 3/4] ARM: dts: imx6ul: Add GPMI nand controller support Michael Trimarchi 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-4-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 11:57 ` Fabio Estevam 2016-02-20 11:57 ` Fabio Estevam [not found] ` <CAOMZO5DTmG7Umt+H20r+tZi9zZhsK=eoPbHOBO3iwvM2GXXLgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-02-20 17:21 ` Michael Trimarchi 2016-02-20 17:21 ` Michael Trimarchi 2016-02-21 11:29 ` [PATCH V2 " Michael Trimarchi 2016-02-21 11:29 ` Michael Trimarchi 2016-02-22 8:26 ` Lothar Waßmann 2016-02-22 8:26 ` Lothar Waßmann [not found] ` <20160222092613.3c32a4a0-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org> 2016-03-20 8:44 ` Michael Trimarchi 2016-03-20 8:44 ` Michael Trimarchi [not found] ` <CAOf5uwkn6k1YfMkMMSksKjakpP-NXsU0G9x0dyBao7n7NXSYug-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-03-21 9:47 ` Lothar Waßmann 2016-03-21 9:47 ` Lothar Waßmann [not found] ` <20160321104718.05834ffa-VjFSrY7JcPWvSplVBqRQBQ@public.gmane.org> 2016-03-22 7:44 ` Michael Trimarchi 2016-03-22 7:44 ` Michael Trimarchi 2016-02-20 10:20 ` [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support Michael Trimarchi 2016-02-20 10:20 ` Michael Trimarchi [not found] ` <1455963652-24618-5-git-send-email-michael-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2016-02-20 14:11 ` Fabio Estevam 2016-02-20 14:11 ` Fabio Estevam [not found] ` <CAOMZO5AmePs3aE2zRSXcSS8iKQ0m2kvTAezsfHS13e-Zv1HCrA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2016-02-20 17:19 ` Michael Trimarchi 2016-02-20 17:19 ` Michael Trimarchi 2016-02-20 17:30 ` Fabio Estevam 2016-02-20 17:30 ` Fabio Estevam 2016-02-21 15:32 ` [PATCH V2 " Michael Trimarchi 2016-02-21 15:32 ` Michael Trimarchi 2016-03-30 11:47 ` [PATCH 0/4] Add support for Engicam IMX6UL module Shawn Guo 2016-03-30 11:47 ` Shawn Guo 2016-03-30 12:46 ` Michael Trimarchi [this message] 2016-03-30 12:46 ` Michael Trimarchi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=CAOf5uwkFoi3_RojUpCsyR3v6EYVahHfjA4MWwEVimtfBhWY9nQ@mail.gmail.com \ --to=michael@amarulasolutions.com \ --cc=computersforpeace@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@freescale.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.