* xilinx Zynq zedboard gnuradio
@ 2019-05-06 9:10 Nitesh Guinde
0 siblings, 0 replies; 3+ messages in thread
From: Nitesh Guinde @ 2019-05-06 9:10 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 532 bytes --]
Hi Philip,
I am trying to port gnuradio onto zedboard. I used the following link
https://github.com/balister/oe-gnuradio-manifest
and build the images folder for zedboard-zynq7.
Then I copied uImage, boot.bin dtb and uenv.txt onto the sd card boot
partition
untarred the gnradio-dev-image-zedboard-zynq7.tar.gz onto the rootfs
partition..
However the card doesnt boot.
Just wanted to find out if the process given in the following links are
fine or any other tweaking is needed.
Thanks,
Nitesh B. Guinde
[-- Attachment #2: Type: text/html, Size: 835 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: xilinx Zynq zedboard gnuradio
2019-05-06 9:11 Nitesh Guinde
@ 2019-05-06 18:20 ` Philip Balister
0 siblings, 0 replies; 3+ messages in thread
From: Philip Balister @ 2019-05-06 18:20 UTC (permalink / raw)
To: Nitesh Guinde, yocto
On 05/06/2019 05:11 AM, Nitesh Guinde wrote:
> The following links were used to bitbake the image
>
> https://github.com/balister/oe-gnuradio-manifest
>
> https://wiki.gnuradio.org/index.php/Zynq
Note the line saying this page is obsolete. That page is around to
document gnuradio and zynq accelerators from several years ago.
Unfortunately, no one has carried on that work, at least publicly.
https://github.com/balister/sdr-build
is what I work with now for assembling images, but I haven't done
anything with the zc702 lately. Things should basically still though. In
meta-sdr master, the gnuradio recipe builds from teh master branch, this
is where I've been making sure the code builds and sometimes managing
runtime testing, although usually on a Beagle X15.
Philip
>
> On Mon, May 6, 2019 at 2:40 PM Nitesh Guinde <nitesh.guinde@gec.ac.in>
> wrote:
>
>> Hi Philip,
>>
>> I am trying to port gnuradio onto zedboard. I used the following link
>> https://github.com/balister/oe-gnuradio-manifest
>>
>> and build the images folder for zedboard-zynq7.
>> Then I copied uImage, boot.bin dtb and uenv.txt onto the sd card boot
>> partition
>>
>> untarred the gnradio-dev-image-zedboard-zynq7.tar.gz onto the rootfs
>> partition..
>>
>> However the card doesnt boot.
>>
>> Just wanted to find out if the process given in the following links are
>> fine or any other tweaking is needed.
>>
>>
>> Thanks,
>> Nitesh B. Guinde
>>
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: xilinx Zynq zedboard gnuradio
@ 2019-05-06 9:11 Nitesh Guinde
2019-05-06 18:20 ` Philip Balister
0 siblings, 1 reply; 3+ messages in thread
From: Nitesh Guinde @ 2019-05-06 9:11 UTC (permalink / raw)
To: yocto
[-- Attachment #1: Type: text/plain, Size: 800 bytes --]
The following links were used to bitbake the image
https://github.com/balister/oe-gnuradio-manifest
https://wiki.gnuradio.org/index.php/Zynq
On Mon, May 6, 2019 at 2:40 PM Nitesh Guinde <nitesh.guinde@gec.ac.in>
wrote:
> Hi Philip,
>
> I am trying to port gnuradio onto zedboard. I used the following link
> https://github.com/balister/oe-gnuradio-manifest
>
> and build the images folder for zedboard-zynq7.
> Then I copied uImage, boot.bin dtb and uenv.txt onto the sd card boot
> partition
>
> untarred the gnradio-dev-image-zedboard-zynq7.tar.gz onto the rootfs
> partition..
>
> However the card doesnt boot.
>
> Just wanted to find out if the process given in the following links are
> fine or any other tweaking is needed.
>
>
> Thanks,
> Nitesh B. Guinde
>
[-- Attachment #2: Type: text/html, Size: 1606 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-06 18:20 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-06 9:10 xilinx Zynq zedboard gnuradio Nitesh Guinde
2019-05-06 9:11 Nitesh Guinde
2019-05-06 18:20 ` Philip Balister
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.