* Wandboard dual core-image-sato and qt4e-demo-image issues
@ 2013-07-22 14:29 Diego Sueiro
2013-07-22 16:46 ` Otavio Salvador
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-22 14:29 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 3619 bytes --]
Hi there,
No image is displayed on HDMI for both core-image-sato and qt4e-demo-image.
I'm getting the following error messages on system console for
core-image-sato:
X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.5.0-27-generic x86_64
Current Operating System: Linux wandboard-dual
3.0.35-wandboard+yocto+gbe440c3 #1 SMP PREEMPT Sat Jul 20 20:38:22 BRT 2013
armv7l
Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw
Build Date: 22 July 2013 10:48:28AM
Current version of pixman: 0.30.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 22 14:16:03 2013
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "extmod" (module does not exist, 0)
(EE) Failed to load module "dbe" (module does not exist, 0)
...done.
Starting Telephony daemon
Starting Linux NFC daemon
imx-audio: setting default mixer settings.
amixer: Unable to find simple control 'Playback',0
Stopping Bootlog daemon: bootlogd.
Poky Next (Yocto Project Reference Distro) 1.4+snapshot-20130721
wandboard-dual /dev/ttymxc0
wandboard-dual login: [ 75.733592] [drm] Initialized drm 1.1.0 20060810
[ 75.753722] [drm] Initialized vivante 1.0.0 20120216 on minor 0
(EE) AIGLX error: vivante exports no extensions
(/usr/lib/dri/vivante_dri.so: undefined symbol: __driDriverExtensions)
(EE) AIGLX: reverting to software rendering
D-BUS per-session daemon address is:
unix:abstract=/tmp/dbus-ojwx3Ld1yh,guid=593333912bfea9cd48ea8c5551ed3ea5
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts
matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates
matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
[settings daemon] Forking. run with -n to prevent fork
** (matchbox-desktop:1930): WARNING **: Error loading icon: Icon
'system-file-manager' not present in theme
** (matchbox-desktop:1930): WARNING **: Error loading icon: Icon 'computer'
not present in theme
** (matchbox-desktop:1930): WARNING **: Error loading icon: Icon
'preferences-desktop' not present in theme
And the following message for qt4e-demo-image:
Unable to load library icui18n "Cannot load library icui18n: (icui18n:
cannot open shared object file: No such file or directory)"
And Build Configuration:
BB_VERSION = "1.19.1"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-12.10"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "wandboard-dual"
DISTRO = "poky"
DISTRO_VERSION = "1.4+snapshot-20130722"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp = "master:31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9"
meta-fsl-arm-extra = "master:fd0255b33948da24527c8abd5b57f75c25f410e8"
meta-fsl-arm = "master:ea8d00398843abe64c80bd89a9bdfede72afffd1"
Regards,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
[-- Attachment #2: Type: text/html, Size: 5952 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-22 14:29 Wandboard dual core-image-sato and qt4e-demo-image issues Diego Sueiro
@ 2013-07-22 16:46 ` Otavio Salvador
2013-07-22 16:55 ` John Weber
0 siblings, 1 reply; 18+ messages in thread
From: Otavio Salvador @ 2013-07-22 16:46 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale
On Mon, Jul 22, 2013 at 11:29 AM, Diego Sueiro <diego.sueiro@gmail.com> wrote:
> Hi there,
>
> No image is displayed on HDMI for both core-image-sato and qt4e-demo-image.
>
> I'm getting the following error messages on system console for
> core-image-sato:
Is this dylan or master; I am using wandboard-dual on HDMI without problems.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-22 16:46 ` Otavio Salvador
@ 2013-07-22 16:55 ` John Weber
2013-07-22 16:58 ` Otavio Salvador
0 siblings, 1 reply; 18+ messages in thread
From: John Weber @ 2013-07-22 16:55 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]
Appears to be master:
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "wandboard-dual"
DISTRO = "poky"
DISTRO_VERSION = "1.4+snapshot-20130722"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp = "master:31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9"
meta-fsl-arm-extra = "master:fd0255b33948da24527c8abd5b57f75c25f410e8"
meta-fsl-arm = "master:ea8d00398843abe64c80bd89a9bdfede72afffd1"
I haven't tried either of those images, just fsl-image-gui. Diego, can you give that a try? The other images should work, but it would be interesting to know if fsl-image-gui works and while the other core images don't.
John
—
Sent from Mailbox for iPad
On Mon, Jul 22, 2013 at 11:46 AM, Otavio Salvador <otavio@ossystems.com.br="mailto:otavio@ossystems.com.br">> wrote:
On Mon, Jul 22, 2013 at 11:29 AM, Diego Sueiro <diego.sueiro@gmail.com> wrote:
> Hi there,
>
> No image is displayed on HDMI for both core-image-sato and qt4e-demo-image.
>
> I'm getting the following error messages on system console for
> core-image-sato:
Is this dylan or master; I am using wandboard-dual on HDMI without problems.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org
https://lists.yoctoproject.org/listinfo/meta-freescale
[-- Attachment #2: Type: text/html, Size: 7601 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-22 16:55 ` John Weber
@ 2013-07-22 16:58 ` Otavio Salvador
2013-07-22 18:35 ` Diego Sueiro
0 siblings, 1 reply; 18+ messages in thread
From: Otavio Salvador @ 2013-07-22 16:58 UTC (permalink / raw)
To: John Weber; +Cc: meta-freescale
On Mon, Jul 22, 2013 at 1:55 PM, John Weber <rjohnweber@gmail.com> wrote:
> Appears to be master:
>
>
>
> TARGET_SYS = "arm-poky-linux-gnueabi"
>
> MACHINE = "wandboard-dual"
>
> DISTRO = "poky"
>
> DISTRO_VERSION = "1.4+snapshot-20130722"
>
> TUNE_FEATURES = "armv7a vfp neon"
>
>
> TARGET_FPU = "vfp-neon"
>
> meta
>
> meta-yocto
>
>
> meta-yocto-bsp = "master:31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9"
>
> meta-fsl-arm-extra = "master:fd0255b33948da24527c8abd5b57f75c25f410e8"
>
> meta-fsl-arm = "master:ea8d00398843abe64c80bd89a9bdfede72afffd1"
>
> I haven't tried either of those images, just fsl-image-gui. Diego, can you
> give that a try? The other images should work, but it would be interesting
> to know if fsl-image-gui works and while the other core images don't.
Good catch; I am using core-image-x11 (way smaller and faster to build).
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-22 16:58 ` Otavio Salvador
@ 2013-07-22 18:35 ` Diego Sueiro
2013-07-23 11:23 ` Diego Sueiro
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-22 18:35 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1662 bytes --]
My meta-fsl-arm master branch was outdated.
I've updated it and I'm building the images again.
I'll keep you informed as soon as I have the results.
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Mon, Jul 22, 2013 at 1:58 PM, Otavio Salvador <otavio@ossystems.com.br>wrote:
> On Mon, Jul 22, 2013 at 1:55 PM, John Weber <rjohnweber@gmail.com> wrote:
> > Appears to be master:
> >
> >
> >
> > TARGET_SYS = "arm-poky-linux-gnueabi"
> >
> > MACHINE = "wandboard-dual"
> >
> > DISTRO = "poky"
> >
> > DISTRO_VERSION = "1.4+snapshot-20130722"
> >
> > TUNE_FEATURES = "armv7a vfp neon"
> >
> >
> > TARGET_FPU = "vfp-neon"
> >
> > meta
> >
> > meta-yocto
> >
> >
> > meta-yocto-bsp = "master:31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9"
> >
> > meta-fsl-arm-extra = "master:fd0255b33948da24527c8abd5b57f75c25f410e8"
> >
> > meta-fsl-arm = "master:ea8d00398843abe64c80bd89a9bdfede72afffd1"
> >
> > I haven't tried either of those images, just fsl-image-gui. Diego, can
> you
> > give that a try? The other images should work, but it would be
> interesting
> > to know if fsl-image-gui works and while the other core images don't.
>
> Good catch; I am using core-image-x11 (way smaller and faster to build).
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://projetos.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
>
[-- Attachment #2: Type: text/html, Size: 2663 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-22 18:35 ` Diego Sueiro
@ 2013-07-23 11:23 ` Diego Sueiro
2013-07-23 12:14 ` Otavio Salvador
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-23 11:23 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
[-- Attachment #1.1: Type: text/plain, Size: 3069 bytes --]
Folks,
After updating meta-fsl-arm and meta-fsl-arm-extra, the same issue is
present.
For qt4e-demo-image:
Unable to load library icui18n "Cannot load library icui18n: (icui18n:
cannot open shared object file: No such file or directory)"
For core-image-x11 the /var/log/Xorg.0.log, /var/log/messages and dmesg is
attached.
I noticed that on u-boot the wandboard logo appears on the screen.
Here is my build configuration:
Build Configuration:
BB_VERSION = "1.19.1"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-12.10"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "wandboard-dual"
DISTRO = "poky"
DISTRO_VERSION = "1.4+snapshot-20130723"
TUNE_FEATURES = "armv7a vfp neon"
TARGET_FPU = "vfp-neon"
meta
meta-yocto
meta-yocto-bsp = "master:31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9"
meta-fsl-arm-extra = "master:4fa3141baa8d6bac68c67dab1100e9a7b13e3f2e"
meta-fsl-arm = "master:ab2540e10a8b1b4ea422807c3443cce54d1eff5c"
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Mon, Jul 22, 2013 at 3:35 PM, Diego Sueiro <diego.sueiro@gmail.com>wrote:
> My meta-fsl-arm master branch was outdated.
> I've updated it and I'm building the images again.
>
> I'll keep you informed as soon as I have the results.
>
> Abraços,
>
> --
> *dS
> Diego Sueiro
>
> Administrador do Portal Embarcados
> www.embarcados.com.br
>
> Engenheiro de Controle e Automação
> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>
> /*long live rock 'n roll*/
>
>
> On Mon, Jul 22, 2013 at 1:58 PM, Otavio Salvador <otavio@ossystems.com.br>wrote:
>
>> On Mon, Jul 22, 2013 at 1:55 PM, John Weber <rjohnweber@gmail.com> wrote:
>> > Appears to be master:
>> >
>> >
>> >
>> > TARGET_SYS = "arm-poky-linux-gnueabi"
>> >
>> > MACHINE = "wandboard-dual"
>> >
>> > DISTRO = "poky"
>> >
>> > DISTRO_VERSION = "1.4+snapshot-20130722"
>> >
>> > TUNE_FEATURES = "armv7a vfp neon"
>> >
>> >
>> > TARGET_FPU = "vfp-neon"
>> >
>> > meta
>> >
>> > meta-yocto
>> >
>> >
>> > meta-yocto-bsp = "master:31e6eee860b5f9f4ac9ef0889bcff5648de6e3f9"
>> >
>> > meta-fsl-arm-extra = "master:fd0255b33948da24527c8abd5b57f75c25f410e8"
>> >
>> > meta-fsl-arm = "master:ea8d00398843abe64c80bd89a9bdfede72afffd1"
>> >
>> > I haven't tried either of those images, just fsl-image-gui. Diego, can
>> you
>> > give that a try? The other images should work, but it would be
>> interesting
>> > to know if fsl-image-gui works and while the other core images don't.
>>
>> Good catch; I am using core-image-x11 (way smaller and faster to build).
>>
>> --
>> Otavio Salvador O.S. Systems
>> http://www.ossystems.com.br http://projetos.ossystems.com.br
>> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
>>
>
>
[-- Attachment #1.2: Type: text/html, Size: 6580 bytes --]
[-- Attachment #2: wand_dual_master_dmesg --]
[-- Type: application/octet-stream, Size: 15659 bytes --]
inux version 3.0.35-4.0.0-wandboard+ge259a0f (dsueiro@dsueiro-N46VM) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 15:26:49 BRT 2013
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Wandboard
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] CPU identified as i.MX6DL/SOLO, silicon rev 1.1
[ 0.000000] On node 0 totalpages: 217088
[ 0.000000] free_area_init_node: node 0, pgdat c06a2500, node_mem_map d0000000
[ 0.000000] DMA zone: 368 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 46736 pages, LIFO batch:15
[ 0.000000] Normal zone: 976 pages used for memmap
[ 0.000000] Normal zone: 78896 pages, LIFO batch:15
[ 0.000000] HighMem zone: 704 pages used for memmap
[ 0.000000] HighMem zone: 89408 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s5248 r8192 d15232 u32768
[ 0.000000] pcpu-alloc: s5248 r8192 d15232 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 215040
[ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 80MB 768MB = 848MB total
[ 0.000000] Memory: 852604k/852604k available, 195972k reserved, 360448K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xf4600000 - 0xffe00000 ( 184 MB)
[ 0.000000] vmalloc : 0xea800000 - 0xf2000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xea000000 ( 672 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0037000 ( 188 kB)
[ 0.000000] .text : 0xc0037000 - 0xc06521c0 (6253 kB)
[ 0.000000] .data : 0xc0654000 - 0xc06a3620 ( 318 kB)
[ 0.000000] .bss : 0xc06a3644 - 0xc06e59fc ( 265 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:624
[ 0.000000] MXC GPIO hardware
[ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
[ 0.000000] Set periph_clk's parent to pll2_pfd_400M!
[ 0.000000] arm_max_freq=800MHz
[ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
[ 0.000000] bootconsole [ttymxc0] enabled
[ 0.000000] Console: colour dummy device 80x30
[ 0.214239] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[ 0.302547] pid_max: default: 32768 minimum: 301
[ 0.307506] Mount-cache hash table entries: 512
[ 0.312856] CPU: Testing write buffer coherency: ok
[ 0.318019] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.418637] CPU1: Booted secondary processor
[ 0.508049] Brought up 2 CPUs
[ 0.515308] SMP: Total of 2 processors activated (3162.11 BogoMIPS).
[ 0.522169] devtmpfs: initialized
[ 0.542684] print_constraints: dummy:
[ 0.546696] NET: Registered protocol family 16
[ 0.555331] print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal
[ 0.562905] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
[ 0.570644] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
[ 0.578352] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
[ 0.586086] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
[ 0.593734] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
[ 0.682344] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.689180] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 0.696525] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.702414] L310 cache controller enabled
[ 0.706441] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B
[ 0.737134] bio: create slab <bio-0> at 0
[ 0.742021] print_constraints: VDDA: 2500 mV
[ 0.746615] print_constraints: VDDIO: 3300 mV
[ 0.751516] vgaarb: loaded
[ 0.754945] SCSI subsystem initialized
[ 0.759013] libata version 3.00 loaded.
[ 0.759329] spi_imx imx6q-ecspi.0: probed
[ 0.763586] spi_imx imx6q-ecspi.1: probed
[ 0.769670] usbcore: registered new interface driver usbfs
[ 0.775315] usbcore: registered new interface driver hub
[ 0.780813] usbcore: registered new device driver usb
[ 0.808042] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[ 0.816185] mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed
[ 0.822668] mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a
[ 0.830387] MIPI CSI2 driver module loaded
[ 0.834626] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.841824] Bluetooth: Core ver 2.16
[ 0.845529] NET: Registered protocol family 31
[ 0.850000] Bluetooth: HCI device and connection manager initialized
[ 0.856375] Bluetooth: HCI socket layer initialized
[ 0.861273] Bluetooth: L2CAP socket layer initialized
[ 0.866407] Bluetooth: SCO socket layer initialized
[ 0.871748] cfg80211: Calling CRDA to update world regulatory domain
[ 0.878199] Switching to clocksource mxc_timer1
[ 0.897547] NET: Registered protocol family 2
[ 0.902129] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.909798] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.918036] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.925822] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.932370] TCP reno registered
[ 0.935536] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.941402] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.948103] NET: Registered protocol family 1
[ 0.952791] RPC: Registered named UNIX socket transport module.
[ 0.958731] RPC: Registered udp transport module.
[ 0.963457] RPC: Registered tcp transport module.
[ 0.968176] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.974646] PCI: CLS 0 bytes, default 32
[ 0.974827] _regulator_get: etb supply vcore not found, using dummy regulator
[ 0.982426] _regulator_get: etm.0 supply vcore not found, using dummy regulator
[ 0.989840] _regulator_get: etm.1 supply vcore not found, using dummy regulator
[ 0.997519] Static Power Management for Freescale i.MX6
[ 1.002776] wait mode is disabled for i.MX6
[ 1.007147] cpaddr = ea820000 suspend_iram_base=ea8b0000
[ 1.012555] PM driver module loaded
[ 1.733942] link up failed, DB_R0:0x00d35000, DB_R1:0x08200000!
[ 1.739879] IMX PCIe port: link down!
[ 1.743939] IMX usb wakeup probe
[ 1.747245] the wakeup pdata is 0xe9c54640
[ 1.747764] IMX usb wakeup probe
[ 1.751058] the wakeup pdata[ 64.483156] PHY: 1:01 - Link is Up is 0xe9c54600
[ 1.751236] cp - 100/Fullu regulator mode:ldo_enable
[
1.755336] i.MXC CPU frequency driver
[ 1.772015] highmem bounce pool size: 64 pages
[ 1.793225] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.800012] msgmni has been set to 961
[ 1.805582] alg: No test for stdrng (krng)
[ 1.809865] io scheduler noop registered
[ 1.813821] io scheduler deadline registered
[ 1.818217] io scheduler cfq registered (default)
[ 1.823866] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
[ 1.830367] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
[ 1.872859] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[ 1.958207] Console: switching to colour frame buffer device 240x67
[ 2.000308] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
[ 2.006721] _regulator_get: get() with no identifier
[ 2.033968] imx-sdma imx-sdma: loaded firmware 1.1
[ 2.044508] imx-sdma imx-sdma: initialized
[ 2.223134] Serial: IMX driver
[ 2.226314] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[ 2.233257] console [ttymxc0] enabled, bootconsole disabled
[ 2.245061] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
[ 2.257319] loop: module loaded
[ 2.261338] FEC Ethernet Driver
[ 2.270553] fec_enet_mii_bus: probed
[ 2.279349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.286059] add wake up source irq 75
[ 2.292986] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 2.299708] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 2.332800] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
[ 2.352786] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 2.359257] hub 1-0:1.0: USB hub found
[ 2.363048] hub 1-0:1.0: 1 port detected
[ 2.367224] add wake up source irq 72
[ 2.370931] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 2.377618] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 2.412794] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
[ 2.432785] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 2.439119] hub 2-0:1.0: USB hub found
[ 2.442906] hub 2-0:1.0: 1 port detected
[ 2.447297] Initializing USB Mass Storage driver...
[ 2.452373] usbcore: registered new interface driver usb-storage
[ 2.458424] USB Mass Storage support registered.
[ 2.463406] ARC USBOTG Device Controller driver (1 August 2005)
[ 2.469385] udc: request mem region for fsl-usb2-udc failed
[ 2.475139] fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
[ 2.482085] mousedev: PS/2 mouse device common for all mice
[ 2.488051] i2c /dev entries driver
[ 2.492577] Linux video capture interface: v2.00
[ 2.497732] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
[ 2.505484] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
[ 2.513219] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
[ 2.521043] Bluetooth: HCI UART driver ver 2.2
[ 2.525509] mxc_hdmi mxc_hdmi: Read EDID again
[ 2.525568] Bluetooth: HCI H4 protocol initialized
[ 2.525763] sdhci: Secure Digital Host Controller Interface driver
[ 2.525770] sdhci: Copyright(c) Pierre Ossman
[ 2.525911] _regulator_get: sdhci-esdhc-imx.2 supply vmmc not found, using dummy regulator
[ 2.526197] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA
[ 2.527273] _regulator_get: sdhci-esdhc-imx.1 supply vmmc not found, using dummy regulator
[ 2.548013] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
[ 2.548073] sdhci sdhci-esdhc-imx.0: no write-protect pin available!
[ 2.548113] _regulator_get: sdhci-esdhc-imx.0 supply vmmc not found, using dummy regulator
[ 2.592942] mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using ADMA
[ 2.600350] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[ 2.612833] VPU initialized
[ 2.616812] mxc_asrc registered
[ 2.631604] Thermal calibration data is 0x5885315f
[ 2.636425] Thermal sensor with ratio = 183
[ 2.652793] Anatop Thermal registered as thermal_zone0
[ 2.658144] anatop_thermal_probe: default cooling device is cpufreq!
[ 2.665464] usbcore: registered new interface driver usbhid
[ 2.671040] usbhid: USB HID core driver
[ 2.675528] usbcore: registered new interface driver snd-usb-audio
[ 2.682379] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
[ 2.682449] mmc0: new high speed SDHC card at address 0260
[ 2.693431] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
[ 2.700897] _regulator_get: 1-000a supply VDDD not found, using dummy regulator
[ 2.701292] mmcblk0: mmc0:0260 7.52 GiB
[ 2.713171] sgtl5000 1-000a: sgtl5000 revision 17
[ 2.714700] mmcblk0: p1 p2
[ 2.721094] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal
[ 2.754052] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
[ 2.765619] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
[ 2.773421] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
[ 2.780364] ALSA device list:
[ 2.783362] #0: sgtl5000-audio
[ 2.786592] #1: imx-spdif
[ 2.789387] #2: imx-hdmi-soc
[ 2.793095] TCP cubic registered
[ 2.796329] NET: Registered protocol family 17
[ 2.800879] Bluetooth: RFCOMM socket layer initialized
[ 2.806191] Bluetooth: RFCOMM ver 1.11
[ 2.809946] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.811479] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
[ 2.819896] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 2.821925] mmc1: queuing unknown CIS tuple 0x80 (4 bytes)
[ 2.831817] Bluetooth: BNEP filters: multicast
[ 2.836276] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.842386] lib80211: common routines for IEEE802.11 drivers
[ 2.848088] lib80211_crypt: registered algorithm 'NULL'
[ 2.848097] lib80211_crypt: registered algorithm 'WEP'
[ 2.848104] lib80211_crypt: registered algorithm 'CCMP'
[ 2.848112] lib80211_crypt: registered algorithm 'TKIP'
[ 2.848119] Registering the dns_resolver key type
[ 2.850852] mmc1: queuing unknown CIS tuple 0x02 (1 bytes)
[ 2.858404] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 2.862664] mmc1: new SDIO card at address 0001
[ 2.870667] ThumbEE CPU extension supported.
[ 2.875521] Bus freq driver module loaded
[ 2.879552] Bus freq driver Enabled
[ 2.885196] mxc_dvfs_core_probe
[ 2.888637] DVFS driver module loaded
[ 2.893578] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 2.907666] EXT3-fs: barriers not enabled
[ 3.102785] mxc_hdmi mxc_hdmi: No modes read from edid
[ 3.107934] mxc_hdmi mxc_hdmi: create default modelist
[ 19.862610] kjournald starting. Commit interval 5 seconds
[ 20.333470] EXT3-fs (mmcblk0p2): using internal journal
[ 20.338715] EXT3-fs (mmcblk0p2): recovery complete
[ 20.479139] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
[ 20.486276] VFS: Mounted root (ext3 filesystem) on device 179:2.
[ 20.497723] devtmpfs: mounted
[ 20.500810] Freeing init memory: 188K
[ 21.525104] udevd[1287]: starting version 182
[ 22.326527] ov5640_read_reg:write reg error:reg=300a
[ 22.331521] camera ov5640_mipi is not found
[ 22.598286] brcmfmac: F1 signature read @0x18000000=0x9934329
[ 22.599210] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4329 rev 3 pmurev 6
[ 22.831840] brcmfmac: brcmf_sdbrcm_write_vars: Download/Upload/Compare of NVRAM ok
[ 23.195098] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Sep 2 2011 14:48:19 version 4.220.48
[ 45.490989] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1)
[ 55.482996] PHY: 1:01 - Link is Up - 1000/Full
[ 57.483789] PHY: 1:01 - Link is Down
[ 57.866755] [drm] Initialized drm 1.1.0 20060810
[ 57.884831] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[ 58.484660] PHY: 1:01 - Link is Up - 1000/Full
[ 60.482959] PHY: 1:01 - Link is Down
[ 61.482974] PHY: 1:01 - Link is Up - 1000/Full
[ 63.483084] PHY: 1:01 - Link is Down
[-- Attachment #3: wand_dual_master_messages --]
[-- Type: application/octet-stream, Size: 30557 bytes --]
Jul 23 11:11:00 wandboard-dual syslog.info syslogd started: BusyBox v1.21.1
Jul 23 11:11:00 wandboard-dual user.notice kernel: klogd started: BusyBox v1.21.1 (2013-07-20 20:44:47 BRT)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] Linux version 3.0.35-4.0.0-wandboard+ge259a0f (dsueiro@dsueiro-N46VM) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 15:26:49 BRT 2013
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.000000] Machine: Wandboard
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] CPU identified as i.MX6DL/SOLO, silicon rev 1.1
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] On node 0 totalpages: 217088
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c06a2500, node_mem_map d0000000
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] DMA zone: 368 pages used for memmap
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] DMA zone: 46736 pages, LIFO batch:15
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] Normal zone: 976 pages used for memmap
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] Normal zone: 78896 pages, LIFO batch:15
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] HighMem zone: 704 pages used for memmap
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] HighMem zone: 89408 pages, LIFO batch:15
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s5248 r8192 d15232 u32768
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] pcpu-alloc: s5248 r8192 d15232 u32768 alloc=8*4096
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 215040
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] Memory: 80MB 768MB = 848MB total
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] Memory: 852604k/852604k available, 195972k reserved, 360448K highmem
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] Virtual kernel memory layout:
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] DMA : 0xf4600000 - 0xffe00000 ( 184 MB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] vmalloc : 0xea800000 - 0xf2000000 ( 120 MB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xea000000 ( 672 MB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] .init : 0xc0008000 - 0xc0037000 ( 188 kB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] .text : 0xc0037000 - 0xc06521c0 (6253 kB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] .data : 0xc0654000 - 0xc06a3620 ( 318 kB)
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.000000] .bss : 0xc06a3644 - 0xc06e59fc ( 265 kB)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] NR_IRQS:624
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] MXC GPIO hardware
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] Set periph_clk's parent to pll2_pfd_400M!
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] arm_max_freq=800MHz
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] bootconsole [ttymxc0] enabled
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.000000] Console: colour dummy device 80x30
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.214239] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.302547] pid_max: default: 32768 minimum: 301
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.307506] Mount-cache hash table entries: 512
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.312856] CPU: Testing write buffer coherency: ok
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.318019] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.418637] CPU1: Booted secondary processor
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.508049] Brought up 2 CPUs
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.515308] SMP: Total of 2 processors activated (3162.11 BogoMIPS).
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.522169] devtmpfs: initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.542684] print_constraints: dummy:
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.546696] NET: Registered protocol family 16
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.555331] print_constraints: vddpu: 725 <--> 1300 mV at 1150 mV fast normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.562905] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.570644] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.578352] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.586086] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.593734] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.682344] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.689180] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.696525] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.702414] L310 cache controller enabled
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.706441] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x02050000, Cache size: 524288 B
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.737134] bio: create slab <bio-0> at 0
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.742021] print_constraints: VDDA: 2500 mV
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.746615] print_constraints: VDDIO: 3300 mV
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.751516] vgaarb: loaded
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 0.754945] SCSI subsystem initialized
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.759013] libata version 3.00 loaded.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.759329] spi_imx imx6q-ecspi.0: probed
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.763586] spi_imx imx6q-ecspi.1: probed
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.769670] usbcore: registered new interface driver usbfs
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.775315] usbcore: registered new interface driver hub
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.780813] usbcore: registered new device driver usb
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.808042] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.816185] mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.822668] mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.830387] MIPI CSI2 driver module loaded
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.834626] Advanced Linux Sound Architecture Driver Version 1.0.24.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.841824] Bluetooth: Core ver 2.16
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.845529] NET: Registered protocol family 31
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.850000] Bluetooth: HCI device and connection manager initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.856375] Bluetooth: HCI socket layer initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.861273] Bluetooth: L2CAP socket layer initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.866407] Bluetooth: SCO socket layer initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.871748] cfg80211: Calling CRDA to update world regulatory domain
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.878199] Switching to clocksource mxc_timer1
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.897547] NET: Registered protocol family 2
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.902129] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.909798] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.918036] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.925822] TCP: Hash tables configured (established 65536 bind 65536)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.932370] TCP reno registered
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.935536] UDP hash table entries: 256 (order: 1, 8192 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.941402] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.948103] NET: Registered protocol family 1
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.952791] RPC: Registered named UNIX socket transport module.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.958731] RPC: Registered udp transport module.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.963457] RPC: Registered tcp transport module.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.968176] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 0.974646] PCI: CLS 0 bytes, default 32
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.974827] _regulator_get: etb supply vcore not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.982426] _regulator_get: etm.0 supply vcore not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 0.989840] _regulator_get: etm.1 supply vcore not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 0.997519] Static Power Management for Freescale i.MX6
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.002776] wait mode is disabled for i.MX6
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.007147] cpaddr = ea820000 suspend_iram_base=ea8b0000
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.012555] PM driver module loaded
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.733942] link up failed, DB_R0:0x00d35000, DB_R1:0x08200000!
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.739879] IMX PCIe port: link down!
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.743939] IMX usb wakeup probe
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 1.747245] the wakeup pdata is 0xe9c54640
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.747764] IMX usb wakeup probe
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 1.751058] the wakeup pdata is 0xe9c54600
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.751236] cpu regulator mode:ldo_enable
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.755336] i.MXC CPU frequency driver
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 1.772015] highmem bounce pool size: 64 pages
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.793225] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.800012] msgmni has been set to 961
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.805582] alg: No test for stdrng (krng)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.809865] io scheduler noop registered
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.813821] io scheduler deadline registered
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.818217] io scheduler cfq registered (default)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.823866] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.830367] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.872859] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 1.958207] Console: switching to colour frame buffer device 240x67
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.000308] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
Jul 23 11:11:00 wandboard-dual user.err kernel: [ 2.006721] _regulator_get: get() with no identifier
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.033968] imx-sdma imx-sdma: loaded firmware 1.1
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.044508] imx-sdma imx-sdma: initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.223134] Serial: IMX driver
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.226314] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.233257] console [ttymxc0] enabled, bootconsole disabled
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.245061] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.257319] loop: module loaded
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.261338] FEC Ethernet Driver
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.270553] fec_enet_mii_bus: probed
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.279349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.286059] add wake up source irq 75
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.292986] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.299708] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.332800] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.352786] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.359257] hub 1-0:1.0: USB hub found
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.363048] hub 1-0:1.0: 1 port detected
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.367224] add wake up source irq 72
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.370931] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.377618] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.412794] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.432785] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.439119] hub 2-0:1.0: USB hub found
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.442906] hub 2-0:1.0: 1 port detected
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.447297] Initializing USB Mass Storage driver...
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.452373] usbcore: registered new interface driver usb-storage
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.458424] USB Mass Storage support registered.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.463406] ARC USBOTG Device Controller driver (1 August 2005)
Jul 23 11:11:00 wandboard-dual user.err kernel: [ 2.469385] udc: request mem region for fsl-usb2-udc failed
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.475139] fsl-usb2-udc: probe of fsl-usb2-udc failed with error -16
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.482085] mousedev: PS/2 mouse device common for all mice
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.488051] i2c /dev entries driver
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.492577] Linux video capture interface: v2.00
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.497732] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.505484] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.513219] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.521043] Bluetooth: HCI UART driver ver 2.2
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.525509] mxc_hdmi mxc_hdmi: Read EDID again
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.525568] Bluetooth: HCI H4 protocol initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.525763] sdhci: Secure Digital Host Controller Interface driver
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.525770] sdhci: Copyright(c) Pierre Ossman
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.525911] _regulator_get: sdhci-esdhc-imx.2 supply vmmc not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.526197] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.527273] _regulator_get: sdhci-esdhc-imx.1 supply vmmc not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.548013] mmc1: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.548073] sdhci sdhci-esdhc-imx.0: no write-protect pin available!
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.548113] _regulator_get: sdhci-esdhc-imx.0 supply vmmc not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.592942] mmc2: SDHCI controller on platform [sdhci-esdhc-imx.0] using ADMA
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.600350] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.612833] VPU initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.616812] mxc_asrc registered
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.631604] Thermal calibration data is 0x5885315f
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.636425] Thermal sensor with ratio = 183
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.652793] Anatop Thermal registered as thermal_zone0
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.658144] anatop_thermal_probe: default cooling device is cpufreq!
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.665464] usbcore: registered new interface driver usbhid
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.671040] usbhid: USB HID core driver
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.675528] usbcore: registered new interface driver snd-usb-audio
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.682379] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.682449] mmc0: new high speed SDHC card at address 0260
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.693431] mxc_spdif mxc_spdif.0: MXC SPDIF Audio
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.700897] _regulator_get: 1-000a supply VDDD not found, using dummy regulator
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.701292] mmcblk0: mmc0:0260 7.52 GiB
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.713171] sgtl5000 1-000a: sgtl5000 revision 17
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.714700] mmcblk0: p1 p2
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.721094] print_constraints: 1-000a: 850 <--> 1600 mV at 1200 mV normal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.754052] asoc: sgtl5000 <-> imx-ssi.1 mapping ok
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.765619] asoc: mxc-spdif <-> imx-spdif-dai.0 mapping ok
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.773421] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.780364] ALSA device list:
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.783362] #0: sgtl5000-audio
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.786592] #1: imx-spdif
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.789387] #2: imx-hdmi-soc
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.793095] TCP cubic registered
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.796329] NET: Registered protocol family 17
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.800879] Bluetooth: RFCOMM socket layer initialized
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.806191] Bluetooth: RFCOMM ver 1.11
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.809946] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.811479] mmc1: queuing unknown CIS tuple 0x80 (50 bytes)
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.819896] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.821925] mmc1: queuing unknown CIS tuple 0x80 (4 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.831817] Bluetooth: BNEP filters: multicast
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.836276] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.842386] lib80211: common routines for IEEE802.11 drivers
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 2.848088] lib80211_crypt: registered algorithm 'NULL'
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 2.848097] lib80211_crypt: registered algorithm 'WEP'
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 2.848104] lib80211_crypt: registered algorithm 'CCMP'
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 2.848112] lib80211_crypt: registered algorithm 'TKIP'
Jul 23 11:11:00 wandboard-dual user.notice kernel: [ 2.848119] Registering the dns_resolver key type
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 2.850852] mmc1: queuing unknown CIS tuple 0x02 (1 bytes)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.858404] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.862664] mmc1: new SDIO card at address 0001
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.870667] ThumbEE CPU extension supported.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.875521] Bus freq driver module loaded
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.879552] Bus freq driver Enabled
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.885196] mxc_dvfs_core_probe
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.888637] DVFS driver module loaded
Jul 23 11:11:00 wandboard-dual user.err kernel: [ 2.893578] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 2.907666] EXT3-fs: barriers not enabled
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 3.102785] mxc_hdmi mxc_hdmi: No modes read from edid
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 3.107934] mxc_hdmi mxc_hdmi: create default modelist
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 19.862610] kjournald starting. Commit interval 5 seconds
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 20.333470] EXT3-fs (mmcblk0p2): using internal journal
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 20.338715] EXT3-fs (mmcblk0p2): recovery complete
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 20.479139] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 20.486276] VFS: Mounted root (ext3 filesystem) on device 179:2.
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 20.497723] devtmpfs: mounted
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 20.500810] Freeing init memory: 188K
Jul 23 11:11:00 wandboard-dual daemon.info kernel: [ 21.525104] udevd[1287]: starting version 182
Jul 23 11:11:00 wandboard-dual user.err kernel: [ 22.326527] ov5640_read_reg:write reg error:reg=300a
Jul 23 11:11:00 wandboard-dual user.warn kernel: [ 22.331521] camera ov5640_mipi is not found
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 22.598286] brcmfmac: F1 signature read @0x18000000=0x9934329
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 22.599210] brcmfmac: brcmf_sdio_chip_drivestrengthinit: No SDIO Drive strength init done for chip 4329 rev 3 pmurev 6
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 22.831840] brcmfmac: brcmf_sdbrcm_write_vars: Download/Upload/Compare of NVRAM ok
Jul 23 11:11:00 wandboard-dual user.debug kernel: [ 23.195098] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Sep 2 2011 14:48:19 version 4.220.48
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 45.490989] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1)
Jul 23 11:11:00 wandboard-dual user.info kernel: [ 55.482996] PHY: 1:01 - Link is Up - 1000/Full
Jul 23 11:11:00 wandboard-dual daemon.info avahi-daemon[1567]: Found user 'avahi' (UID 998) and group 'avahi' (GID 996).
Jul 23 11:11:00 wandboard-dual daemon.info avahi-daemon[1567]: Successfully dropped root privileges.
Jul 23 11:11:00 wandboard-dual daemon.info avahi-daemon[1567]: avahi-daemon 0.6.31 starting up.
Jul 23 11:11:00 wandboard-dual daemon.info avahi-daemon[1567]: Successfully called chroot().
Jul 23 11:11:00 wandboard-dual daemon.info avahi-daemon[1567]: Successfully dropped remaining capabilities.
Jul 23 11:11:00 wandboard-dual daemon.info avahi-daemon[1567]: Loading service file /services/sftp-ssh.service.
Jul 23 11:11:01 wandboard-dual daemon.info avahi-daemon[1567]: Loading service file /services/ssh.service.
Jul 23 11:11:01 wandboard-dual daemon.info avahi-daemon[1567]: Network interface enumeration completed.
Jul 23 11:11:01 wandboard-dual daemon.info avahi-daemon[1567]: Registering HINFO record with values 'ARMV7L'/'LINUX'.
Jul 23 11:11:01 wandboard-dual daemon.info avahi-daemon[1567]: Server startup complete. Host name is wandboard-dual.local. Local service cookie is 112186232.
Jul 23 11:11:01 wandboard-dual daemon.info avahi-daemon[1567]: Service "wandboard-dual" (/services/ssh.service) successfully established.
Jul 23 11:11:01 wandboard-dual daemon.info avahi-daemon[1567]: Service "wandboard-dual" (/services/sftp-ssh.service) successfully established.
Jul 23 11:11:01 wandboard-dual daemon.info ofonod[1571]: oFono version 1.12
Jul 23 11:11:01 wandboard-dual daemon.info neard[1576]: NEAR daemon version 0.10
Jul 23 11:11:01 wandboard-dual daemon.err neard[1576]: Unable to find NFC netlink family
Jul 23 11:11:01 wandboard-dual daemon.err neard[1576]: netlink init failed
Jul 23 11:11:01 wandboard-dual daemon.err neard[1576]: *** NETLINK INITIALIZATION FAILED ***
Jul 23 11:11:02 wandboard-dual user.info kernel: [ 57.483789] PHY: 1:01 - Link is Down
Jul 23 11:11:02 wandboard-dual user.info kernel: [ 57.866755] [drm] Initialized drm 1.1.0 20060810
Jul 23 11:11:02 wandboard-dual user.info kernel: [ 57.884831] [drm] Initialized vivante 1.0.0 20120216 on minor 0
Jul 23 11:11:03 wandboard-dual user.info kernel: [ 58.484660] PHY: 1:01 - Link is Up - 1000/Full
Jul 23 11:11:05 wandboard-dual user.info kernel: [ 60.482959] PHY: 1:01 - Link is Down
Jul 23 11:11:06 wandboard-dual user.info kernel: [ 61.482974] PHY: 1:01 - Link is Up - 1000/Full
Jul 23 11:11:07 wandboard-dual authpriv.notice login[1587]: ROOT LOGIN on '/dev/ttymxc0'
Jul 23 11:11:08 wandboard-dual user.info kernel: [ 63.483084] PHY: 1:01 - Link is Down
Jul 23 11:11:09 wandboard-dual user.info kernel: [ 64.483156] PHY: 1:01 - Link is Up - 100/Full
[-- Attachment #4: wand_dual_master_Xorg.0.log --]
[-- Type: application/octet-stream, Size: 11053 bytes --]
[188327.876] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[188327.876] _XSERVTransOpen: transport open failed for inet6/wandboard-dual:0
[188327.876] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[188327.901]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[188327.901] X Protocol Version 11, Revision 0
[188327.901] Build Operating System: Linux 3.5.0-27-generic x86_64
[188327.901] Current Operating System: Linux wandboard-dual 3.0.35-4.0.0-wandboard+ge259a0f #1 SMP PREEMPT Mon Jul 22 15:26:49 BRT 2013 armv7l
[188327.901] Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw
[188327.901] Build Date: 23 July 2013 08:07:31AM
[188327.902]
[188327.902] Current version of pixman: 0.30.0
[188327.902] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[188327.902] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[188327.903] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 23 11:11:02 2013
[188328.095] (==) Using config file: "/etc/X11/xorg.conf"
[188328.095] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[188328.125] (==) No Layout section. Using the first Screen section.
[188328.125] (==) No screen section available. Using defaults.
[188328.125] (**) |-->Screen "Default Screen Section" (0)
[188328.125] (**) | |-->Monitor "<default monitor>"
[188328.152] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[188328.152] (**) | |-->Device "i.MX Accelerated Framebuffer Device"
[188328.152] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[188328.152] (**) Option "BlankTime" "0"
[188328.152] (**) Option "StandbyTime" "0"
[188328.152] (**) Option "SuspendTime" "0"
[188328.152] (**) Option "OffTime" "0"
[188328.153] (==) Automatically adding devices
[188328.153] (==) Automatically enabling devices
[188328.153] (WW) The directory "/usr/share/fonts/X11/misc/" does not exist.
[188328.153] Entry deleted from font path.
[188328.153] (WW) The directory "/usr/share/fonts/X11/TTF/" does not exist.
[188328.153] Entry deleted from font path.
[188328.153] (WW) The directory "/usr/share/fonts/X11/OTF/" does not exist.
[188328.153] Entry deleted from font path.
[188328.153] (WW) The directory "/usr/share/fonts/X11/Type1/" does not exist.
[188328.153] Entry deleted from font path.
[188328.153] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[188328.153] Entry deleted from font path.
[188328.153] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[188328.153] Entry deleted from font path.
[188328.153] (==) FontPath set to:
[188328.153] (==) ModulePath set to "/usr/lib/xorg/modules"
[188328.153] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[188328.153] (II) Loader magic: 0x17e858
[188328.153] (II) Module ABI versions:
[188328.153] X.Org ANSI C Emulation: 0.4
[188328.153] X.Org Video Driver: 11.0
[188328.153] X.Org XInput driver : 13.0
[188328.153] X.Org Server Extension : 6.0
[188328.154] (II) Open APM successful
[188328.154] (II) LoadModule: "extmod"
[188328.244] (WW) Warning, couldn't open module extmod
[188328.244] (II) UnloadModule: "extmod"
[188328.244] (II) Unloading extmod
[188328.244] (EE) Failed to load module "extmod" (module does not exist, 0)
[188328.244] (II) LoadModule: "dbe"
[188328.244] (WW) Warning, couldn't open module dbe
[188328.244] (II) UnloadModule: "dbe"
[188328.244] (II) Unloading dbe
[188328.244] (EE) Failed to load module "dbe" (module does not exist, 0)
[188328.244] (II) LoadModule: "glx"
[188328.245] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[188328.292] (II) Module glx: vendor="X.Org Foundation"
[188328.292] compiled for 1.11.4, module version = 1.0.0
[188328.292] ABI class: X.Org Server Extension, version 6.0
[188328.298] (==) AIGLX enabled
[188328.298] (II) Loading extension GLX
[188328.298] (II) LoadModule: "dri"
[188328.298] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[188328.325] (II) Module dri: vendor="X.Org Foundation"
[188328.325] compiled for 1.11.4, module version = 1.0.0
[188328.325] ABI class: X.Org Server Extension, version 6.0
[188328.325] (II) Loading extension XFree86-DRI
[188328.325] (II) LoadModule: "dri2"
[188328.325] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[188328.337] (II) Module dri2: vendor="X.Org Foundation"
[188328.337] compiled for 1.11.4, module version = 1.2.0
[188328.338] ABI class: X.Org Server Extension, version 6.0
[188328.338] (II) Loading extension DRI2
[188328.338] (II) LoadModule: "vivante"
[188328.338] (II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
[188328.448] (II) Module vivante: vendor="X.Org Foundation"
[188328.449] compiled for 1.11.4, module version = 1.0.0
[188328.449] ABI class: X.Org Video Driver, version 11.0
[188328.449] (II) VIVANTE: fb driver for vivante: VivanteGC500, VivanteGC2100,
VivanteGCCORE
[188328.449] (--) using VT number 1
[188328.563] (WW) Falling back to old probe method for vivante
[188328.563] (II) Loading sub module "fbdevhw"
[188328.563] (II) LoadModule: "fbdevhw"
[188328.563] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[188328.575] (II) Module fbdevhw: vendor="X.Org Foundation"
[188328.575] compiled for 1.11.4, module version = 0.0.2
[188328.575] ABI class: X.Org Video Driver, version 11.0
[188328.575] (II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
[188328.575] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[188328.575] (II) VIVANTE(0): using default device
[188328.575] (II) VIVANTE(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[188328.575] (==) VIVANTE(0): Depth 24, (==) framebuffer bpp 32
[188328.576] (==) VIVANTE(0): RGB weight 888
[188328.576] (==) VIVANTE(0): Default visual is TrueColor
[188328.576] (==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
[188328.576] (II) VIVANTE(0): hardware: DISP3 BG - DI1 (video memory: 8100kB)
[188328.576] (II) VIVANTE(0): checking modes against framebuffer device...
[188328.576] (II) VIVANTE(0): checking modes against monitor...
[188328.576] (--) VIVANTE(0): Virtual size is 1920x1080 (pitch 1920)
[188328.576] (**) VIVANTE(0): Built-in mode "current": 148.5 MHz, 67.5 kHz, 60.0 Hz
[188328.576] (II) VIVANTE(0): Modeline "current"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync -csync (67.5 kHz)
[188328.576] (==) VIVANTE(0): DPI set to (96, 96)
[188328.576] (II) Loading sub module "fb"
[188328.576] (II) LoadModule: "fb"
[188328.577] (II) Loading /usr/lib/xorg/modules/libfb.so
[188328.620] (II) Module fb: vendor="X.Org Foundation"
[188328.620] compiled for 1.11.4, module version = 1.0.0
[188328.620] ABI class: X.Org ANSI C Emulation, version 0.4
[188328.620] (II) Loading sub module "exa"
[188328.620] (II) LoadModule: "exa"
[188328.621] (II) Loading /usr/lib/xorg/modules/libexa.so
[188328.636] (II) Module exa: vendor="X.Org Foundation"
[188328.636] compiled for 1.11.4, module version = 2.5.0
[188328.636] ABI class: X.Org Video Driver, version 11.0
[188328.636] (--) Depth 24 pixmap format is 32 bpp
[188328.728] (II) VIVANTE(0): FB Start = 0x4b3a0000 FB Base = 0x4b3a0000 FB Offset = (nil)
[188328.756] (II) VIVANTE(0): test Initializing EXA
[188328.756] (II) EXA(0): Driver allocated offscreen pixmaps
[188328.756] (II) EXA(0): Driver registered support for the following operations:
[188328.756] (II) Solid
[188328.756] (II) Copy
[188328.756] (II) Composite (RENDER acceleration)
[188328.756] (II) UploadToScreen
[188328.792] (==) VIVANTE(0): Backing store disabled
[188328.802] (==) VIVANTE(0): DPMS enabled
[188328.802] drmOpenDevice: node name is /dev/dri/card0
[188328.809] drmOpenDevice: open result is -1, (No such device or address)
[188328.819] drmOpenDevice: open result is -1, (No such device or address)
[188328.819] drmOpenDevice: Open failed
[188328.819] drmOpenDevice: node name is /dev/dri/card0
[188328.830] drmOpenDevice: open result is -1, (No such device or address)
[188328.836] drmOpenDevice: open result is -1, (No such device or address)
[188328.836] drmOpenDevice: Open failed
[188328.945] drmOpenByBusid: Searching for BusID platform:Vivante GCCore
[188328.945] drmOpenDevice: node name is /dev/dri/card0
[188328.945] drmOpenDevice: open result is 11, (OK)
[188328.945] drmOpenByBusid: drmOpenMinor returns 11
[188328.946] drmOpenByBusid: drmGetBusid reports platform:Vivante GCCore
[188328.946] (II) [drm] loaded kernel module for "vivante" driver.
[188328.946] (II) [drm] DRM interface version 1.4
[188328.946] (II) [drm] DRM open master succeeded.
[188328.946] (II) VIVANTE(0): [drm] Using the DRM lock SAREA also for drawables.
[188328.946] (II) VIVANTE(0): [drm] framebuffer handle = 0x14000000
[188328.946] (II) VIVANTE(0): [drm] added 1 reserved context for kernel
[188328.946] (II) VIVANTE(0): X context handle = 0x1
[188328.947] (II) VIVANTE(0): [drm] installed DRM signal handler
[188328.947] (II) VIVANTE(0): [DRI] installation complete
[188328.947] (==) RandR enabled
[188328.947] (II) Initializing built-in extension Generic Event Extension
[188328.947] (II) Initializing built-in extension SHAPE
[188328.947] (II) Initializing built-in extension MIT-SHM
[188328.947] (II) Initializing built-in extension XInputExtension
[188328.947] (II) Initializing built-in extension XTEST
[188328.947] (II) Initializing built-in extension BIG-REQUESTS
[188328.947] (II) Initializing built-in extension SYNC
[188328.947] (II) Initializing built-in extension XKEYBOARD
[188328.947] (II) Initializing built-in extension XC-MISC
[188328.947] (II) Initializing built-in extension XFIXES
[188328.947] (II) Initializing built-in extension RENDER
[188328.947] (II) Initializing built-in extension RANDR
[188328.947] (II) Initializing built-in extension COMPOSITE
[188328.947] (II) Initializing built-in extension DAMAGE
[188328.988] (II) AIGLX: Screen 0 is not DRI2 capable
[188328.988] drmOpenDevice: node name is /dev/dri/card0
[188328.988] drmOpenDevice: open result is 12, (OK)
[188328.988] drmOpenByBusid: Searching for BusID platform:Vivante GCCore
[188328.988] drmOpenDevice: node name is /dev/dri/card0
[188328.989] drmOpenDevice: open result is 12, (OK)
[188328.989] drmOpenByBusid: drmOpenMinor returns 12
[188328.989] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[188328.989] drmOpenByBusid: drmGetBusid reports platform:Vivante GCCore
[188329.125] (EE) AIGLX error: vivante exports no extensions (/usr/lib/dri/vivante_dri.so: undefined symbol: __driDriverExtensions)
[188329.126] (EE) AIGLX: reverting to software rendering
[188329.469] (II) AIGLX: Loaded and initialized swrast
[188329.469] (II) GLX: Initialized DRISWRAST GL provider for screen 0
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 11:23 ` Diego Sueiro
@ 2013-07-23 12:14 ` Otavio Salvador
2013-07-23 12:17 ` Diego Sueiro
0 siblings, 1 reply; 18+ messages in thread
From: Otavio Salvador @ 2013-07-23 12:14 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale
On Tue, Jul 23, 2013 at 8:23 AM, Diego Sueiro <diego.sueiro@gmail.com> wrote:
> Folks,
>
> After updating meta-fsl-arm and meta-fsl-arm-extra, the same issue is
> present.
>
> For qt4e-demo-image:
>
> Unable to load library icui18n "Cannot load library icui18n: (icui18n:
> cannot open shared object file: No such file or directory)"
I didn't test this image for a while. You could check with strace
which library is missing there.
> For core-image-x11 the /var/log/Xorg.0.log, /var/log/messages and dmesg is
> attached.
>
> I noticed that on u-boot the wandboard logo appears on the screen.
The core-image-x11 works as expected? From the Xorg log it seems fine.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 12:14 ` Otavio Salvador
@ 2013-07-23 12:17 ` Diego Sueiro
2013-07-23 12:26 ` Otavio Salvador
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-23 12:17 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 1121 bytes --]
On Tue, Jul 23, 2013 at 9:14 AM, Otavio Salvador <otavio@ossystems.com.br>wrote:
> On Tue, Jul 23, 2013 at 8:23 AM, Diego Sueiro <diego.sueiro@gmail.com>
> wrote:
> > Folks,
> >
> > After updating meta-fsl-arm and meta-fsl-arm-extra, the same issue is
> > present.
> >
> > For qt4e-demo-image:
> >
> > Unable to load library icui18n "Cannot load library icui18n: (icui18n:
> > cannot open shared object file: No such file or directory)"
>
> I didn't test this image for a while. You could check with strace
> which library is missing there.
>
> > For core-image-x11 the /var/log/Xorg.0.log, /var/log/messages and dmesg
> is
> > attached.
> >
> > I noticed that on u-boot the wandboard logo appears on the screen.
>
> The core-image-x11 works as expected? From the Xorg log it seems fine.
The screen is black. Is there an application in which I can execute to see
if its worked?
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://projetos.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
>
[-- Attachment #2: Type: text/html, Size: 1935 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 12:17 ` Diego Sueiro
@ 2013-07-23 12:26 ` Otavio Salvador
0 siblings, 0 replies; 18+ messages in thread
From: Otavio Salvador @ 2013-07-23 12:26 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale
On Tue, Jul 23, 2013 at 9:17 AM, Diego Sueiro <diego.sueiro@gmail.com> wrote:
>
> On Tue, Jul 23, 2013 at 9:14 AM, Otavio Salvador <otavio@ossystems.com.br>
> wrote:
>>
>> On Tue, Jul 23, 2013 at 8:23 AM, Diego Sueiro <diego.sueiro@gmail.com>
>> wrote:
>> > Folks,
>> >
>> > After updating meta-fsl-arm and meta-fsl-arm-extra, the same issue is
>> > present.
>> >
>> > For qt4e-demo-image:
>> >
>> > Unable to load library icui18n "Cannot load library icui18n: (icui18n:
>> > cannot open shared object file: No such file or directory)"
>>
>> I didn't test this image for a while. You could check with strace
>> which library is missing there.
>>
>> > For core-image-x11 the /var/log/Xorg.0.log, /var/log/messages and dmesg
>> > is
>> > attached.
>> >
>> > I noticed that on u-boot the wandboard logo appears on the screen.
>>
>> The core-image-x11 works as expected? From the Xorg log it seems fine.
>
>
> The screen is black. Is there an application in which I can execute to see
> if its worked?
You're suppose to have a terminal running. Here I see the Window
decoration and the cursor blinking.
Which monitor are you using? U-Boot HDMI setup uses a much smaller
resolution and it might explain why you see it and not the desktop.
Can you change U-Boot environment and add:
video=mxcfb0:dev=hdmi,1280x800M@60,if=RGB24
This works here as well.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 23:44 ` John Weber
@ 2013-07-24 11:28 ` Diego Sueiro
0 siblings, 0 replies; 18+ messages in thread
From: Diego Sueiro @ 2013-07-24 11:28 UTC (permalink / raw)
To: John Weber; +Cc: meta-freescale, Otavio Salvador
[-- Attachment #1: Type: text/plain, Size: 3818 bytes --]
Hi John,
I re-burned the fsl-image-gui and it worked.
Maybe I did something wrong.
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Tue, Jul 23, 2013 at 8:44 PM, John Weber <rjohnweber@gmail.com> wrote:
> Diego,
>
> That is not what happens with me on either the Dual or the Quad.
>
> Can we have a boot log?
>
> John
>
>
>
> On 7/23/13 3:12 PM, Diego Sueiro wrote:
>
>> John,
>>
>> The screen is black on fsl-image-gui.
>> I tried to launch matchbox-terminal but not appears on the screen.
>>
>>
>>
>> Abraços,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> Administrador do Portal Embarcados
>> www.embarcados.com.br <http://www.embarcados.com.br>
>>
>> Engenheiro de Controle e Automação
>> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>>
>> /*long live rock 'n roll*/
>>
>>
>> On Tue, Jul 23, 2013 at 10:55 AM, Diego Sueiro <diego.sueiro@gmail.com
>> <mailto:diego.sueiro@gmail.com**>> wrote:
>>
>> Thanks.
>>
>> That is really nice.
>>
>>
>> Abraços,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> Administrador do Portal Embarcados
>> www.embarcados.com.br <http://www.embarcados.com.br>
>>
>> Engenheiro de Controle e Automação
>> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>>
>> /*long live rock 'n roll*/
>>
>>
>> On Tue, Jul 23, 2013 at 10:50 AM, John Weber <rjohnweber@gmail.com
>> <mailto:rjohnweber@gmail.com>> wrote:
>>
>> I think so - I've tried to mix master and release branches and it
>> does
>> not work well, as they depend on each other.
>>
>> Otavio has a really nice repo and setup script for this:
>> https://github.com/Freescale/_**_fsl-community-bsp-platform<https://github.com/Freescale/__fsl-community-bsp-platform>
>>
>> <https://github.com/Freescale/**fsl-community-bsp-platform<https://github.com/Freescale/fsl-community-bsp-platform>
>> >
>>
>>
>>
>> On 7/23/13 8:47 AM, Diego Sueiro wrote:
>>
>> Hi John,
>>
>> I did it after sent the e-mail. ;-)
>> I need to add meta-openembedded too. I'm using both
>> (meta-fsl-demos and
>> meta-openembedded) on master branch, is it correct?
>>
>> Abraços,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> Administrador do Portal Embarcados
>> www.embarcados.com.br <http://www.embarcados.com.br>
>> <http://www.embarcados.com.br>
>>
>>
>> Engenheiro de Controle e Automação
>> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>>
>> /*long live rock 'n roll*/
>>
>>
>> On Tue, Jul 23, 2013 at 10:18 AM, John Weber <
>> rjohnweber@gmail.com
>> <mailto:rjohnweber@gmail.com>
>> <mailto:rjohnweber@gmail.com <mailto:rjohnweber@gmail.com>>**>
>> wrote:
>>
>> Diego -
>>
>>
>> It worked with
>> "video=mxcfb0:dev=hdmi,____**1440x900M@60,if=RGB24" on
>>
>>
>> core-image-sato
>> and core-image-x11.
>> But qt4e-demo-image doesn't. May a library is
>> missing on
>> roofts.
>>
>> Let's see what's going to happen with a
>> fsl-image-gui.
>>
>>
>>
>> I noticed that your layers don't include meta-fsl-demos
>> - that
>> is the layer
>> that contains the fsl-image-(gui,test) recipes. You'll
>> want to
>> pull that in
>> and integrate into your bblayers.
>>
>> John
>>
>>
>>
>>
>>
[-- Attachment #2: Type: text/html, Size: 5882 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 20:12 ` Diego Sueiro
@ 2013-07-23 23:44 ` John Weber
2013-07-24 11:28 ` Diego Sueiro
0 siblings, 1 reply; 18+ messages in thread
From: John Weber @ 2013-07-23 23:44 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale, Otavio Salvador
Diego,
That is not what happens with me on either the Dual or the Quad.
Can we have a boot log?
John
On 7/23/13 3:12 PM, Diego Sueiro wrote:
> John,
>
> The screen is black on fsl-image-gui.
> I tried to launch matchbox-terminal but not appears on the screen.
>
>
>
> Abraços,
>
> --
> *dS
> Diego Sueiro
>
> Administrador do Portal Embarcados
> www.embarcados.com.br <http://www.embarcados.com.br>
>
> Engenheiro de Controle e Automação
> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>
> /*long live rock 'n roll*/
>
>
> On Tue, Jul 23, 2013 at 10:55 AM, Diego Sueiro <diego.sueiro@gmail.com
> <mailto:diego.sueiro@gmail.com>> wrote:
>
> Thanks.
>
> That is really nice.
>
>
> Abraços,
>
> --
> *dS
> Diego Sueiro
>
> Administrador do Portal Embarcados
> www.embarcados.com.br <http://www.embarcados.com.br>
>
> Engenheiro de Controle e Automação
> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>
> /*long live rock 'n roll*/
>
>
> On Tue, Jul 23, 2013 at 10:50 AM, John Weber <rjohnweber@gmail.com
> <mailto:rjohnweber@gmail.com>> wrote:
>
> I think so - I've tried to mix master and release branches and it does
> not work well, as they depend on each other.
>
> Otavio has a really nice repo and setup script for this:
> https://github.com/Freescale/__fsl-community-bsp-platform
> <https://github.com/Freescale/fsl-community-bsp-platform>
>
>
>
> On 7/23/13 8:47 AM, Diego Sueiro wrote:
>
> Hi John,
>
> I did it after sent the e-mail. ;-)
> I need to add meta-openembedded too. I'm using both (meta-fsl-demos and
> meta-openembedded) on master branch, is it correct?
>
> Abraços,
>
> --
> *dS
> Diego Sueiro
>
> Administrador do Portal Embarcados
> www.embarcados.com.br <http://www.embarcados.com.br>
> <http://www.embarcados.com.br>
>
>
> Engenheiro de Controle e Automação
> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>
> /*long live rock 'n roll*/
>
>
> On Tue, Jul 23, 2013 at 10:18 AM, John Weber <rjohnweber@gmail.com
> <mailto:rjohnweber@gmail.com>
> <mailto:rjohnweber@gmail.com <mailto:rjohnweber@gmail.com>>> wrote:
>
> Diego -
>
>
> It worked with
> "video=mxcfb0:dev=hdmi,____1440x900M@60,if=RGB24" on
>
> core-image-sato
> and core-image-x11.
> But qt4e-demo-image doesn't. May a library is missing on
> roofts.
>
> Let's see what's going to happen with a fsl-image-gui.
>
>
>
> I noticed that your layers don't include meta-fsl-demos - that
> is the layer
> that contains the fsl-image-(gui,test) recipes. You'll want to
> pull that in
> and integrate into your bblayers.
>
> John
>
>
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 13:55 ` Diego Sueiro
@ 2013-07-23 20:12 ` Diego Sueiro
2013-07-23 23:44 ` John Weber
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-23 20:12 UTC (permalink / raw)
To: John Weber; +Cc: meta-freescale, Otavio Salvador
[-- Attachment #1: Type: text/plain, Size: 2339 bytes --]
John,
The screen is black on fsl-image-gui.
I tried to launch matchbox-terminal but not appears on the screen.
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Tue, Jul 23, 2013 at 10:55 AM, Diego Sueiro <diego.sueiro@gmail.com>wrote:
> Thanks.
>
> That is really nice.
>
>
> Abraços,
>
> --
> *dS
> Diego Sueiro
>
> Administrador do Portal Embarcados
> www.embarcados.com.br
>
> Engenheiro de Controle e Automação
> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>
> /*long live rock 'n roll*/
>
>
> On Tue, Jul 23, 2013 at 10:50 AM, John Weber <rjohnweber@gmail.com> wrote:
>
>> I think so - I've tried to mix master and release branches and it does
>> not work well, as they depend on each other.
>>
>> Otavio has a really nice repo and setup script for this:
>> https://github.com/Freescale/**fsl-community-bsp-platform<https://github.com/Freescale/fsl-community-bsp-platform>
>>
>>
>>
>> On 7/23/13 8:47 AM, Diego Sueiro wrote:
>>
>>> Hi John,
>>>
>>> I did it after sent the e-mail. ;-)
>>> I need to add meta-openembedded too. I'm using both (meta-fsl-demos and
>>> meta-openembedded) on master branch, is it correct?
>>>
>>> Abraços,
>>>
>>> --
>>> *dS
>>> Diego Sueiro
>>>
>>> Administrador do Portal Embarcados
>>> www.embarcados.com.br <http://www.embarcados.com.br>
>>>
>>>
>>> Engenheiro de Controle e Automação
>>> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>>>
>>> /*long live rock 'n roll*/
>>>
>>>
>>> On Tue, Jul 23, 2013 at 10:18 AM, John Weber <rjohnweber@gmail.com
>>> <mailto:rjohnweber@gmail.com>> wrote:
>>>
>>> Diego -
>>>
>>>
>>> It worked with "video=mxcfb0:dev=hdmi,__**1440x900M@60,if=RGB24"
>>> on
>>>
>>> core-image-sato
>>> and core-image-x11.
>>> But qt4e-demo-image doesn't. May a library is missing on roofts.
>>>
>>> Let's see what's going to happen with a fsl-image-gui.
>>>
>>>
>>>
>>> I noticed that your layers don't include meta-fsl-demos - that is
>>> the layer
>>> that contains the fsl-image-(gui,test) recipes. You'll want to pull
>>> that in
>>> and integrate into your bblayers.
>>>
>>> John
>>>
>>>
>>>
>
[-- Attachment #2: Type: text/html, Size: 3869 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 13:50 ` John Weber
@ 2013-07-23 13:55 ` Diego Sueiro
2013-07-23 20:12 ` Diego Sueiro
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-23 13:55 UTC (permalink / raw)
To: John Weber; +Cc: meta-freescale, Otavio Salvador
[-- Attachment #1: Type: text/plain, Size: 1839 bytes --]
Thanks.
That is really nice.
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Tue, Jul 23, 2013 at 10:50 AM, John Weber <rjohnweber@gmail.com> wrote:
> I think so - I've tried to mix master and release branches and it does not
> work well, as they depend on each other.
>
> Otavio has a really nice repo and setup script for this:
> https://github.com/Freescale/**fsl-community-bsp-platform<https://github.com/Freescale/fsl-community-bsp-platform>
>
>
>
> On 7/23/13 8:47 AM, Diego Sueiro wrote:
>
>> Hi John,
>>
>> I did it after sent the e-mail. ;-)
>> I need to add meta-openembedded too. I'm using both (meta-fsl-demos and
>> meta-openembedded) on master branch, is it correct?
>>
>> Abraços,
>>
>> --
>> *dS
>> Diego Sueiro
>>
>> Administrador do Portal Embarcados
>> www.embarcados.com.br <http://www.embarcados.com.br>
>>
>>
>> Engenheiro de Controle e Automação
>> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>>
>> /*long live rock 'n roll*/
>>
>>
>> On Tue, Jul 23, 2013 at 10:18 AM, John Weber <rjohnweber@gmail.com
>> <mailto:rjohnweber@gmail.com>> wrote:
>>
>> Diego -
>>
>>
>> It worked with "video=mxcfb0:dev=hdmi,__**1440x900M@60,if=RGB24"
>> on
>>
>> core-image-sato
>> and core-image-x11.
>> But qt4e-demo-image doesn't. May a library is missing on roofts.
>>
>> Let's see what's going to happen with a fsl-image-gui.
>>
>>
>>
>> I noticed that your layers don't include meta-fsl-demos - that is the
>> layer
>> that contains the fsl-image-(gui,test) recipes. You'll want to pull
>> that in
>> and integrate into your bblayers.
>>
>> John
>>
>>
>>
[-- Attachment #2: Type: text/html, Size: 2922 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 13:47 ` Diego Sueiro
@ 2013-07-23 13:50 ` John Weber
2013-07-23 13:55 ` Diego Sueiro
0 siblings, 1 reply; 18+ messages in thread
From: John Weber @ 2013-07-23 13:50 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale, Otavio Salvador
I think so - I've tried to mix master and release branches and it does not work
well, as they depend on each other.
Otavio has a really nice repo and setup script for this:
https://github.com/Freescale/fsl-community-bsp-platform
On 7/23/13 8:47 AM, Diego Sueiro wrote:
> Hi John,
>
> I did it after sent the e-mail. ;-)
> I need to add meta-openembedded too. I'm using both (meta-fsl-demos and
> meta-openembedded) on master branch, is it correct?
>
> Abraços,
>
> --
> *dS
> Diego Sueiro
>
> Administrador do Portal Embarcados
> www.embarcados.com.br <http://www.embarcados.com.br>
>
> Engenheiro de Controle e Automação
> UNIVERSIDADE FEDERAL DE ITAJUBÀ
>
> /*long live rock 'n roll*/
>
>
> On Tue, Jul 23, 2013 at 10:18 AM, John Weber <rjohnweber@gmail.com
> <mailto:rjohnweber@gmail.com>> wrote:
>
> Diego -
>
>
> It worked with "video=mxcfb0:dev=hdmi,__1440x900M@60,if=RGB24" on
> core-image-sato
> and core-image-x11.
> But qt4e-demo-image doesn't. May a library is missing on roofts.
>
> Let's see what's going to happen with a fsl-image-gui.
>
>
>
> I noticed that your layers don't include meta-fsl-demos - that is the layer
> that contains the fsl-image-(gui,test) recipes. You'll want to pull that in
> and integrate into your bblayers.
>
> John
>
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 13:18 ` John Weber
@ 2013-07-23 13:47 ` Diego Sueiro
2013-07-23 13:50 ` John Weber
0 siblings, 1 reply; 18+ messages in thread
From: Diego Sueiro @ 2013-07-23 13:47 UTC (permalink / raw)
To: John Weber; +Cc: meta-freescale, Otavio Salvador
[-- Attachment #1: Type: text/plain, Size: 939 bytes --]
Hi John,
I did it after sent the e-mail. ;-)
I need to add meta-openembedded too. I'm using both (meta-fsl-demos and
meta-openembedded) on master branch, is it correct?
Abraços,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Tue, Jul 23, 2013 at 10:18 AM, John Weber <rjohnweber@gmail.com> wrote:
> Diego -
>
>
> It worked with "video=mxcfb0:dev=hdmi,**1440x900M@60,if=RGB24" on
>> core-image-sato
>> and core-image-x11.
>> But qt4e-demo-image doesn't. May a library is missing on roofts.
>>
>> Let's see what's going to happen with a fsl-image-gui.
>>
>
>
> I noticed that your layers don't include meta-fsl-demos - that is the
> layer that contains the fsl-image-(gui,test) recipes. You'll want to pull
> that in and integrate into your bblayers.
>
> John
>
[-- Attachment #2: Type: text/html, Size: 1661 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 13:12 Diego Sueiro
2013-07-23 13:14 ` Otavio Salvador
@ 2013-07-23 13:18 ` John Weber
2013-07-23 13:47 ` Diego Sueiro
1 sibling, 1 reply; 18+ messages in thread
From: John Weber @ 2013-07-23 13:18 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale, Otavio Salvador
Diego -
> It worked with "video=mxcfb0:dev=hdmi,1440x900M@60,if=RGB24" on core-image-sato
> and core-image-x11.
> But qt4e-demo-image doesn't. May a library is missing on roofts.
>
> Let's see what's going to happen with a fsl-image-gui.
I noticed that your layers don't include meta-fsl-demos - that is the layer that
contains the fsl-image-(gui,test) recipes. You'll want to pull that in and
integrate into your bblayers.
John
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
2013-07-23 13:12 Diego Sueiro
@ 2013-07-23 13:14 ` Otavio Salvador
2013-07-23 13:18 ` John Weber
1 sibling, 0 replies; 18+ messages in thread
From: Otavio Salvador @ 2013-07-23 13:14 UTC (permalink / raw)
To: Diego Sueiro; +Cc: meta-freescale
On Tue, Jul 23, 2013 at 10:12 AM, Diego Sueiro <diego.sueiro@gmail.com> wrote:
> Thanks Otavio.
>
> It worked with "video=mxcfb0:dev=hdmi,1440x900M@60,if=RGB24" on
> core-image-sato and core-image-x11.
Good.
> But qt4e-demo-image doesn't. May a library is missing on roofts.
Yes; it is something missing.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: Wandboard dual core-image-sato and qt4e-demo-image issues
@ 2013-07-23 13:12 Diego Sueiro
2013-07-23 13:14 ` Otavio Salvador
2013-07-23 13:18 ` John Weber
0 siblings, 2 replies; 18+ messages in thread
From: Diego Sueiro @ 2013-07-23 13:12 UTC (permalink / raw)
To: Otavio Salvador; +Cc: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 2223 bytes --]
Thanks Otavio.
It worked with "video=mxcfb0:dev=hdmi,1440x900M@60,if=RGB24" on
core-image-sato and core-image-x11.
But qt4e-demo-image doesn't. May a library is missing on roofts.
Let's see what's going to happen with a fsl-image-gui.
Rgds,
--
*dS
Diego Sueiro
Administrador do Portal Embarcados
www.embarcados.com.br
Engenheiro de Controle e Automação
UNIVERSIDADE FEDERAL DE ITAJUBÀ
/*long live rock 'n roll*/
On Tue, Jul 23, 2013 at 9:26 AM, Otavio Salvador <otavio@ossystems.com.br>wrote:
> On Tue, Jul 23, 2013 at 9:17 AM, Diego Sueiro <diego.sueiro@gmail.com>
> wrote:
> >
> > On Tue, Jul 23, 2013 at 9:14 AM, Otavio Salvador <
> otavio@ossystems.com.br>
> > wrote:
> >>
> >> On Tue, Jul 23, 2013 at 8:23 AM, Diego Sueiro <diego.sueiro@gmail.com>
> >> wrote:
> >> > Folks,
> >> >
> >> > After updating meta-fsl-arm and meta-fsl-arm-extra, the same issue is
> >> > present.
> >> >
> >> > For qt4e-demo-image:
> >> >
> >> > Unable to load library icui18n "Cannot load library icui18n: (icui18n:
> >> > cannot open shared object file: No such file or directory)"
> >>
> >> I didn't test this image for a while. You could check with strace
> >> which library is missing there.
> >>
> >> > For core-image-x11 the /var/log/Xorg.0.log, /var/log/messages and
> dmesg
> >> > is
> >> > attached.
> >> >
> >> > I noticed that on u-boot the wandboard logo appears on the screen.
> >>
> >> The core-image-x11 works as expected? From the Xorg log it seems fine.
> >
> >
> > The screen is black. Is there an application in which I can execute to
> see
> > if its worked?
>
> You're suppose to have a terminal running. Here I see the Window
> decoration and the cursor blinking.
>
> Which monitor are you using? U-Boot HDMI setup uses a much smaller
> resolution and it might explain why you see it and not the desktop.
> Can you change U-Boot environment and add:
>
> video=mxcfb0:dev=hdmi,1280x800M@60,if=RGB24
>
> This works here as well.
>
> --
> Otavio Salvador O.S. Systems
> http://www.ossystems.com.br http://projetos.ossystems.com.br
> Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
>
[-- Attachment #2: Type: text/html, Size: 3445 bytes --]
^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2013-07-24 11:29 UTC | newest]
Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-22 14:29 Wandboard dual core-image-sato and qt4e-demo-image issues Diego Sueiro
2013-07-22 16:46 ` Otavio Salvador
2013-07-22 16:55 ` John Weber
2013-07-22 16:58 ` Otavio Salvador
2013-07-22 18:35 ` Diego Sueiro
2013-07-23 11:23 ` Diego Sueiro
2013-07-23 12:14 ` Otavio Salvador
2013-07-23 12:17 ` Diego Sueiro
2013-07-23 12:26 ` Otavio Salvador
2013-07-23 13:12 Diego Sueiro
2013-07-23 13:14 ` Otavio Salvador
2013-07-23 13:18 ` John Weber
2013-07-23 13:47 ` Diego Sueiro
2013-07-23 13:50 ` John Weber
2013-07-23 13:55 ` Diego Sueiro
2013-07-23 20:12 ` Diego Sueiro
2013-07-23 23:44 ` John Weber
2013-07-24 11:28 ` Diego Sueiro
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.