* Nitrogen 6X - can not get cameras operational.
@ 2015-11-26 14:26 Cristian Pandele
2015-11-26 15:53 ` Otavio Salvador
0 siblings, 1 reply; 3+ messages in thread
From: Cristian Pandele @ 2015-11-26 14:26 UTC (permalink / raw)
To: meta-freescale
[-- Attachment #1: Type: text/plain, Size: 952 bytes --]
Hi all,
I was directed to this mailing list by Igor from Freescale's community
forum. I have posted this issue there:
https://community.freescale.com/message/591641. Please take a look there for
a bit of context on my question.
In short, on a Nitrogen 6X board, running Ubuntu Trusty, with the
OV5640_MIPI and )V5640 parrallel cameras plugged in, if I write:
dmesg | grep video, I get:
mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
mxc_v4l2_output v4l2_out.35: V4L2 device registered as video16
mxc_v4l2_output v4l2_out.35: V4L2 device registered as video17
There is nothing about the cameras being registered as specific devices.
However, they are registered as /dev/video0 and /dev/video1.
My question is: How can I programmatically determine which video device the
cameras are attached to?
Thank you very much in advance,
Kindest regards,
Cristian Pandele
[-- Attachment #2: Type: text/html, Size: 4651 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Nitrogen 6X - can not get cameras operational.
2015-11-26 14:26 Nitrogen 6X - can not get cameras operational Cristian Pandele
@ 2015-11-26 15:53 ` Otavio Salvador
2015-11-27 9:11 ` Cristian Pandele
0 siblings, 1 reply; 3+ messages in thread
From: Otavio Salvador @ 2015-11-26 15:53 UTC (permalink / raw)
To: Cristian Pandele; +Cc: meta-freescale
On Thu, Nov 26, 2015 at 12:26 PM, Cristian Pandele <cp@zeuxion.com> wrote:
> In short, on a Nitrogen 6X board, running Ubuntu Trusty, with the
> OV5640_MIPI and )V5640 parrallel cameras plugged in, if I write:
There is a fix merged for jethro and master branch to address this.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Nitrogen 6X - can not get cameras operational.
2015-11-26 15:53 ` Otavio Salvador
@ 2015-11-27 9:11 ` Cristian Pandele
0 siblings, 0 replies; 3+ messages in thread
From: Cristian Pandele @ 2015-11-27 9:11 UTC (permalink / raw)
To: 'Otavio Salvador'; +Cc: meta-freescale
Great, thanks!
Kindest regards,
Cristian Pandele
FPGA/ASIC Design Engineer
-----Original Message-----
From: Otavio Salvador [mailto:otavio.salvador@ossystems.com.br]
Sent: 26 November 2015 16:54
To: Cristian Pandele <cp@zeuxion.com>
Cc: meta-freescale@yoctoproject.org
Subject: Re: [meta-freescale] Nitrogen 6X - can not get cameras operational.
On Thu, Nov 26, 2015 at 12:26 PM, Cristian Pandele <cp@zeuxion.com> wrote:
> In short, on a Nitrogen 6X board, running Ubuntu Trusty, with the
> OV5640_MIPI and )V5640 parrallel cameras plugged in, if I write:
There is a fix merged for jethro and master branch to address this.
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-11-27 9:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-26 14:26 Nitrogen 6X - can not get cameras operational Cristian Pandele
2015-11-26 15:53 ` Otavio Salvador
2015-11-27 9:11 ` Cristian Pandele
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.