Re: 3.15.6 USB issue with pwc cam

* Re: 3.15.6 USB issue with pwc cam
       [not found] <53DCE329.4030106@xs4all.nl>
@ 2014-08-03 19:59 ` Nick Krause
  2014-08-04  3:21   ` Nick Krause
  2014-08-04  9:17 ` Laurent Pinchart
  1 sibling, 1 reply; 18+ messages in thread
From: Nick Krause @ 2014-08-03 19:59 UTC (permalink / raw)
  To: Udo van den Heuvel, linux-kernel, USB list

On Sat, Aug 2, 2014 at 9:10 AM, Udo van den Heuvel <udovdh@xs4all.nl> wrote:
> Hello,
>
> I moved a PWC webcam to a USB3 port, and this happened:
>
> [53008.911811] usb 5-2: new full-speed USB device number 2 using xhci_hcd
> [53009.213504] usb 5-2: New USB device found, idVendor=0471, idProduct=0311
> [53009.213514] usb 5-2: New USB device strings: Mfr=0, Product=0,
> SerialNumber=1
> [53009.213519] usb 5-2: SerialNumber: 01690000A5000000
> [53009.215547] pwc: Philips PCVC740K (ToUCam Pro)/PCVC840 (ToUCam II)
> USB webcam detected.
> [53009.846698] pwc: Registered as video0.
> [53009.846814] input: PWC snapshot button as
> /devices/pci0000:00/0000:00:07.0/0000:02:00.0/usb5/5-2/input/input7
> [53009.847233] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847242] usb 5-2: Not enough bandwidth for altsetting 1
> [53009.847275] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847285] usb 5-2: Not enough bandwidth for altsetting 2
> [53009.847317] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847323] usb 5-2: Not enough bandwidth for altsetting 3
> [53009.847355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53009.847360] usb 5-2: Not enough bandwidth for altsetting 4
> [53010.004876] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.004890] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.004896] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.004960] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.004988] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.004992] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.005066] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.005075] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.005079] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.005530] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.005540] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.005544] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.006438] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.006446] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.006450] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.007453] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.007461] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.007465] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.007567] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.007574] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.007578] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.007681] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.007689] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.007695] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.008126] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.008135] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.008140] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.008798] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.008808] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.008812] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.009576] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.009583] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.009588] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.009680] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.009689] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.009697] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.009978] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.009986] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.009990] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.010705] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.010716] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.010725] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.011350] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.011360] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.011366] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.012643] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.012655] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.012660] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.012758] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.012766] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.012771] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.013017] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.013025] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.013031] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.013793] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.013798] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.013803] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.014096] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.014102] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.014106] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.025999] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026007] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026010] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026072] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026075] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026077] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026119] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026122] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026125] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026388] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026392] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026393] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026588] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026591] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026592] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026872] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026876] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026878] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026908] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026911] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026912] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.026949] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.026951] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.026952] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027119] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027121] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027122] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027279] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027281] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027283] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027550] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027554] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027556] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027594] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027597] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027598] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027675] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027677] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027679] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.027870] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.027874] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.027876] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028157] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028161] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028163] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028662] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028666] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028668] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028709] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028711] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028713] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.028794] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.028797] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.028799] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.029075] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.029078] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.029079] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.029439] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.029442] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.029444] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038066] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038073] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038075] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038107] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038110] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038111] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038148] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038151] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038153] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038437] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038441] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038443] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038617] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038620] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038621] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038890] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038894] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038896] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038928] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038930] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038932] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.038964] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.038966] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.038968] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039140] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039142] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039144] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039296] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039299] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039300] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039598] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039601] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039603] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039654] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039657] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039658] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.039772] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.039775] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.039777] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040044] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040049] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040051] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040331] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040334] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040336] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040838] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040841] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040843] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040884] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040886] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040888] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.040971] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.040973] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.040975] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.041207] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.041209] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.041211] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.041450] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.041454] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.041455] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.050772] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.050788] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.050791] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.050825] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.050837] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.050839] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.050879] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.050882] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.050884] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051166] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051170] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051172] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051408] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051412] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051414] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051805] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051809] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051811] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051842] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051845] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051847] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.051880] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.051883] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.051885] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052174] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052177] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052179] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052390] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052393] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052395] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052783] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052787] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052789] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052887] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052890] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052892] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.052982] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.052984] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.052986] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.053262] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.053264] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.053266] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.053556] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.053559] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.053561] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054205] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054210] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054212] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054256] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054259] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054261] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054358] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054360] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054612] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054615] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054617] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.054845] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.054848] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.054850] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064272] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064280] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064283] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064320] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064324] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064326] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064369] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064373] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064375] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064694] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064698] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064701] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.064921] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.064925] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.064927] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065241] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065245] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065248] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065281] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065285] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065287] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065330] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065333] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065335] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.065611] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.065628] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.065634] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066072] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066078] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066081] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066528] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066533] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066535] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066590] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066594] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066598] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.066707] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.066710] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.066713] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.067095] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.067100] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.067103] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.067457] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.067465] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.067470] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068139] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068144] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068147] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068230] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068233] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068236] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068350] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068354] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068356] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068659] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068663] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068665] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.068980] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.068985] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.068988] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078360] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078366] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078368] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078398] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078400] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078402] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078498] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078501] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078503] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.078770] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.078774] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.078777] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079011] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079015] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079017] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079321] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079324] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079325] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079356] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079359] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079361] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079394] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079396] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079398] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079661] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079663] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079665] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.079820] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.079822] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.079823] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080214] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080218] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080219] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080264] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080266] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080268] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080355] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080357] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080359] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080561] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080563] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080564] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.080746] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.080748] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.080749] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081155] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081158] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081160] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081197] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081199] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081201] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081274] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081276] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081278] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081470] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081473] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081474] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53010.081701] xhci_hcd 0000:02:00.0: ERROR: unexpected command
> completion code 0x11.
> [53010.081706] usb 5-2: Not enough bandwidth for altsetting 1
> [53010.081710] usb 5-2: 2:1: usb_set_interface failed (-22)
> [53063.286759] ------------[ cut here ]------------
> [53063.286783] WARNING: CPU: 2 PID: 3282 at
> drivers/media/v4l2-core/videobuf2-core.c:2011
> __vb2_queue_cancel+0x102/0x170 [videobuf2_core]()
> [53063.286786] Modules linked in: bnep bluetooth fuse edac_core
> cpufreq_userspace nf_conntrack_netbios_ns nf_conntrack_broadcast
> ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6
> xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_conntrack_ipv4
> nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter
> ip6_tables ip_tables x_tables eeprom it87 hwmon_vid ext2 ppdev kvm_amd
> kvm snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi microcode
> k10temp parport_serial pwc parport_pc videobuf2_vmalloc videobuf2_memops
> v4l2_common parport videobuf2_core i2c_piix4 snd_hda_codec_realtek
> videodev evdev cp210x snd_hda_codec_generic snd_hda_intel cdc_acm
> usbserial snd_hda_controller snd_hda_codec snd_seq snd_seq_device
> snd_pcm snd_timer snd button acpi_cpufreq nfsd auth_rpcgss oid_registry
> [53063.286844]  nfs_acl lockd binfmt_misc sunrpc autofs4 hid_generic
> usbhid radeon fbcon ehci_pci bitblit softcursor ehci_hcd font ohci_pci
> ohci_hcd cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight sr_mod
> cdrom drm_kms_helper ttm drm xhci_hcd fb fbdev
> [53063.286876] CPU: 2 PID: 3282 Comm: skype Not tainted 3.15.6 #5
> [53063.286879] Hardware name: Gigabyte Technology Co., Ltd. To be filled
> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
> [53063.286882]  0000000000000000 000000001e19c613 ffffffff814f1fd3
> 0000000000000000
> [53063.286887]  ffffffff81069fc1 0000000000000000 0000000040045613
> ffff880316167500
> [53063.286892]  ffff88042ca30300 ffff8803cf337c48 ffffffffa0446832
> ffff88042ca30000
> [53063.286897] Call Trace:
> [53063.286907]  [<ffffffff814f1fd3>] ? dump_stack+0x4a/0x75
> [53063.286914]  [<ffffffff81069fc1>] ? warn_slowpath_common+0x81/0xb0
> [53063.286924]  [<ffffffffa0446832>] ? __vb2_queue_cancel+0x102/0x170
> [videobuf2_core]
> [53063.286933]  [<ffffffffa044853d>] ? vb2_internal_streamoff+0x1d/0x50
> [videobuf2_core]
> [53063.286944]  [<ffffffffa0423163>] ? __video_do_ioctl+0x2f3/0x380
> [videodev]
> [53063.286957]  [<ffffffffa0422bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
> [53063.286967]  [<ffffffffa0422e70>] ? video_ioctl2+0x10/0x10 [videodev]
> [53063.286974]  [<ffffffff810bffbb>] ? futex_wait_queue_me+0xdb/0x140
> [53063.286983]  [<ffffffffa041e7df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
> [53063.286993]  [<ffffffffa042c7b6>] ? do_video_ioctl+0x246/0x1330
> [videodev]
> [53063.286998]  [<ffffffff810c0b9c>] ? futex_wake+0x7c/0x160
> [53063.287003]  [<ffffffff810c280c>] ? do_futex+0x12c/0xb00
> [53063.287008]  [<ffffffff814f714e>] ? _raw_spin_unlock_irq+0xe/0x30
> [53063.287013]  [<ffffffff8108e3be>] ? finish_task_switch+0x3e/0xe0
> [53063.287022]  [<ffffffffa042d922>] ? v4l2_compat_ioctl32+0x82/0xb8
> [videodev]
> [53063.287028]  [<ffffffff81185f32>] ? compat_SyS_ioctl+0x132/0x1120
> [53063.287034]  [<ffffffff810b5e1d>] ? ktime_get_ts+0x3d/0xd0
> [53063.287039]  [<ffffffff81085aa8>] ? posix_ktime_get_ts+0x8/0x10
> [53063.287043]  [<ffffffff81086960>] ? SyS_clock_gettime+0x60/0x80
> [53063.287049]  [<ffffffff814f9405>] ? cstar_dispatch+0x7/0x1a
> [53063.287052] ---[ end trace 03072f5e82f277f5 ]---
> [53063.287055] ------------[ cut here ]------------
> [53063.287063] WARNING: CPU: 2 PID: 3282 at
> drivers/media/v4l2-core/videobuf2-core.c:1095
> vb2_buffer_done+0x17f/0x1a0 [videobuf2_core]()
> [53063.287066] Modules linked in: bnep bluetooth fuse edac_core
> cpufreq_userspace nf_conntrack_netbios_ns nf_conntrack_broadcast
> ip6t_REJECT ipt_REJECT xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6
> xt_conntrack iptable_filter ipt_MASQUERADE iptable_nat nf_conntrack_ipv4
> nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip6table_filter
> ip6_tables ip_tables x_tables eeprom it87 hwmon_vid ext2 ppdev kvm_amd
> kvm snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi microcode
> k10temp parport_serial pwc parport_pc videobuf2_vmalloc videobuf2_memops
> v4l2_common parport videobuf2_core i2c_piix4 snd_hda_codec_realtek
> videodev evdev cp210x snd_hda_codec_generic snd_hda_intel cdc_acm
> usbserial snd_hda_controller snd_hda_codec snd_seq snd_seq_device
> snd_pcm snd_timer snd button acpi_cpufreq nfsd auth_rpcgss oid_registry
> [53063.287118]  nfs_acl lockd binfmt_misc sunrpc autofs4 hid_generic
> usbhid radeon fbcon ehci_pci bitblit softcursor ehci_hcd font ohci_pci
> ohci_hcd cfbfillrect cfbimgblt cfbcopyarea i2c_algo_bit backlight sr_mod
> cdrom drm_kms_helper ttm drm xhci_hcd fb fbdev
> [53063.287143] CPU: 2 PID: 3282 Comm: skype Tainted: G        W
> 3.15.6 #5
> [53063.287146] Hardware name: Gigabyte Technology Co., Ltd. To be filled
> by O.E.M./F2A85X-UP4, BIOS F5a 04/30/2013
> [53063.287148]  0000000000000000 000000001e19c613 ffffffff814f1fd3
> 0000000000000000
> [53063.287153]  ffffffff81069fc1 0000000000000000 ffff88040cc27c00
> ffff88042ca30300
> [53063.287157]  0000000000000003 ffff8803cf337c48 ffffffffa04460af
> 0000000000000000
> [53063.287161] Call Trace:
> [53063.287167]  [<ffffffff814f1fd3>] ? dump_stack+0x4a/0x75
> [53063.287172]  [<ffffffff81069fc1>] ? warn_slowpath_common+0x81/0xb0
> [53063.287181]  [<ffffffffa04460af>] ? vb2_buffer_done+0x17f/0x1a0
> [videobuf2_core]
> [53063.287189]  [<ffffffffa044686e>] ? __vb2_queue_cancel+0x13e/0x170
> [videobuf2_core]
> [53063.287197]  [<ffffffffa044853d>] ?f+0x1d/0x50
> [videobuf2_core] vb2_internal_streamof
> [53063.287207]  [<ffffffffa0423163>] ? __video_do_ioctl+0x2f3/0x380
> [videodev]
> [53063.287219]  [<ffffffffa0422bc0>] ? video_usercopy+0x1f0/0x490 [videodev]
> [53063.287229]  [<ffffffffa0422e70>] ? video_ioctl2+0x10/0x10 [videodev]
> [53063.287234]  [<ffffffff810bffbb>] ? futex_wait_queue_me+0xdb/0x140
> [53063.287244]  [<ffffffffa041e7df>] ? v4l2_ioctl+0x11f/0x160 [videodev]
> [53063.287253]  [<ffffffffa042c7b6>] ? do_video_ioctl+0x246/0x1330
> [videodev]
> [53063.287259]  [<ffffffff810c0b9c>] ? futex_wake+0x7c/0x160
> [53063.287263]  [<ffffffff810c280c>] ? do_futex+0x12c/0xb00
> [53063.287268]  [<ffffffff814f714e>] ? _raw_spin_unlock_irq+0xe/0x30
> [53063.287272]  [<ffffffff8108e3be>] ? finish_task_switch+0x3e/0xe0
> [53063.287281]  [<ffffffffa042d922>] ? v4l2_compat_ioctl32+0x82/0xb8
> [videodev]
> [53063.287286]  [<ffffffff81185f32>] ? compat_SyS_ioctl+0x132/0x1120
> [53063.287291]  [<ffffffff810b5e1d>] ? ktime_get_ts+0x3d/0xd0
> [53063.287295]  [<ffffffff81085aa8>] ? posix_ktime_get_ts+0x8/0x10
> [53063.287299]  [<ffffffff81086960>] ? SyS_clock_gettime+0x60/0x80
> [53063.287305]  [<ffffffff814f9405>] ? cstar_dispatch+0x7/0x1a
> [53063.287308] ---[ end trace 03072f5e82f277f6 ]---
>
>
>
> At the end I checked the video settings in skype.
> What went wrong?
> How to fix?
>
>
> Kind regards,
> Udo
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Udo,
I am adding the mailing list as there are people who are experts in
this part of the kernel who
known more then me. I am going to explain my trace of this to you and
add it below for
the other developers to read about the issue here.

1.  The first part of the trace is going to vb2_internal_streamoff and
in this function we are calling the second function
of the trace which is vb2_buffer_done.
2. In function ,vb2_buffer_done we have a few WARN ONS and now to we
need to find the correct one
3. Since we are calling the function with the state,
VB2_BUF_STATE_ERROR  we are tracked to the first
if statement here as we are not streaming at this point

if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
 return;
We will hit your warn on and print out your message. This seems to be
correct at least to me but let's see what the other developers state
about my trace.

As for the other developers on the list seems to a miswritten call
before be are streaming this queue of data and I would recommend
moving the lines

q->streaming = 0;
q->start_streaming_called = 0;
q->queued_count = 0;
before the for loop that calls vb2_buffer_done inside it's self. I am
not sure if this is a correct fix through as I am new but if it is I
will write the patch
and sent it to the usb mailing list.
Regards Nick

^ permalink raw reply	[flat|nested] 18+ messages in thread