[PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
  spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: orion: use pm_runtime_last_busy_and_autosuspend helper
  spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: core: use pm_runtime_last_busy_and_autosuspend helper
  tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
  usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
  video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

 Documentation/power/runtime_pm.txt          |    4 ++
 drivers/dma/ste_dma40.c                     |   30 ++++---------
 drivers/extcon/extcon-arizona.c             |    6 +--
 drivers/gpu/drm/i915/intel_pm.c             |    3 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
 drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
 drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
 drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
 drivers/gpu/vga/vga_switcheroo.c            |    7 +--
 drivers/i2c/busses/i2c-designware-core.c    |    3 +-
 drivers/i2c/busses/i2c-omap.c               |    6 +--
 drivers/i2c/busses/i2c-qup.c                |    3 +-
 drivers/mfd/ab8500-gpadc.c                  |    6 +--
 drivers/mfd/arizona-irq.c                   |    3 +-
 drivers/misc/mei/client.c                   |   12 ++----
 drivers/mmc/core/core.c                     |    3 +-
 drivers/mmc/host/mmci.c                     |   12 ++----
 drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
 drivers/mmc/host/sdhci-pxav3.c              |    6 +--
 drivers/mmc/host/sdhci.c                    |    3 +-
 drivers/nfc/trf7970a.c                      |    3 +-
 drivers/power/pm2301_charger.c              |    3 +-
 drivers/spi/spi-omap2-mcspi.c               |    9 +---
 drivers/spi/spi-orion.c                     |    3 +-
 drivers/spi/spi-ti-qspi.c                   |    5 +-
 drivers/spi/spi.c                           |    6 +--
 drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
 drivers/usb/musb/omap2430.c                 |    6 +--
 drivers/video/fbdev/auo_k190x.c             |    9 +---
 include/linux/pm_runtime.h                  |    6 +++
 31 files changed, 97 insertions(+), 177 deletions(-)


Thanks
-- 
~Vinod

[PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
  spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: orion: use pm_runtime_last_busy_and_autosuspend helper
  spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: core: use pm_runtime_last_busy_and_autosuspend helper
  tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
  usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
  video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

 Documentation/power/runtime_pm.txt          |    4 ++
 drivers/dma/ste_dma40.c                     |   30 ++++---------
 drivers/extcon/extcon-arizona.c             |    6 +--
 drivers/gpu/drm/i915/intel_pm.c             |    3 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
 drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
 drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
 drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
 drivers/gpu/vga/vga_switcheroo.c            |    7 +--
 drivers/i2c/busses/i2c-designware-core.c    |    3 +-
 drivers/i2c/busses/i2c-omap.c               |    6 +--
 drivers/i2c/busses/i2c-qup.c                |    3 +-
 drivers/mfd/ab8500-gpadc.c                  |    6 +--
 drivers/mfd/arizona-irq.c                   |    3 +-
 drivers/misc/mei/client.c                   |   12 ++----
 drivers/mmc/core/core.c                     |    3 +-
 drivers/mmc/host/mmci.c                     |   12 ++----
 drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
 drivers/mmc/host/sdhci-pxav3.c              |    6 +--
 drivers/mmc/host/sdhci.c                    |    3 +-
 drivers/nfc/trf7970a.c                      |    3 +-
 drivers/power/pm2301_charger.c              |    3 +-
 drivers/spi/spi-omap2-mcspi.c               |    9 +---
 drivers/spi/spi-orion.c                     |    3 +-
 drivers/spi/spi-ti-qspi.c                   |    5 +-
 drivers/spi/spi.c                           |    6 +--
 drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
 drivers/usb/musb/omap2430.c                 |    6 +--
 drivers/video/fbdev/auo_k190x.c             |    9 +---
 include/linux/pm_runtime.h                  |    6 +++
 31 files changed, 97 insertions(+), 177 deletions(-)


Thanks
-- 
~Vinod

[PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
  spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: orion: use pm_runtime_last_busy_and_autosuspend helper
  spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: core: use pm_runtime_last_busy_and_autosuspend helper
  tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
  usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
  video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

 Documentation/power/runtime_pm.txt          |    4 ++
 drivers/dma/ste_dma40.c                     |   30 ++++---------
 drivers/extcon/extcon-arizona.c             |    6 +--
 drivers/gpu/drm/i915/intel_pm.c             |    3 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
 drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
 drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
 drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
 drivers/gpu/vga/vga_switcheroo.c            |    7 +--
 drivers/i2c/busses/i2c-designware-core.c    |    3 +-
 drivers/i2c/busses/i2c-omap.c               |    6 +--
 drivers/i2c/busses/i2c-qup.c                |    3 +-
 drivers/mfd/ab8500-gpadc.c                  |    6 +--
 drivers/mfd/arizona-irq.c                   |    3 +-
 drivers/misc/mei/client.c                   |   12 ++----
 drivers/mmc/core/core.c                     |    3 +-
 drivers/mmc/host/mmci.c                     |   12 ++----
 drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
 drivers/mmc/host/sdhci-pxav3.c              |    6 +--
 drivers/mmc/host/sdhci.c                    |    3 +-
 drivers/nfc/trf7970a.c                      |    3 +-
 drivers/power/pm2301_charger.c              |    3 +-
 drivers/spi/spi-omap2-mcspi.c               |    9 +---
 drivers/spi/spi-orion.c                     |    3 +-
 drivers/spi/spi-ti-qspi.c                   |    5 +-
 drivers/spi/spi.c                           |    6 +--
 drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
 drivers/usb/musb/omap2430.c                 |    6 +--
 drivers/video/fbdev/auo_k190x.c             |    9 +---
 include/linux/pm_runtime.h                  |    6 +++
 31 files changed, 97 insertions(+), 177 deletions(-)


Thanks
-- 
~Vinod

[PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
  spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: orion: use pm_runtime_last_busy_and_autosuspend helper
  spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: core: use pm_runtime_last_busy_and_autosuspend helper
  tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
  usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
  video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

 Documentation/power/runtime_pm.txt          |    4 ++
 drivers/dma/ste_dma40.c                     |   30 ++++---------
 drivers/extcon/extcon-arizona.c             |    6 +--
 drivers/gpu/drm/i915/intel_pm.c             |    3 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
 drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
 drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
 drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
 drivers/gpu/vga/vga_switcheroo.c            |    7 +--
 drivers/i2c/busses/i2c-designware-core.c    |    3 +-
 drivers/i2c/busses/i2c-omap.c               |    6 +--
 drivers/i2c/busses/i2c-qup.c                |    3 +-
 drivers/mfd/ab8500-gpadc.c                  |    6 +--
 drivers/mfd/arizona-irq.c                   |    3 +-
 drivers/misc/mei/client.c                   |   12 ++----
 drivers/mmc/core/core.c                     |    3 +-
 drivers/mmc/host/mmci.c                     |   12 ++----
 drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
 drivers/mmc/host/sdhci-pxav3.c              |    6 +--
 drivers/mmc/host/sdhci.c                    |    3 +-
 drivers/nfc/trf7970a.c                      |    3 +-
 drivers/power/pm2301_charger.c              |    3 +-
 drivers/spi/spi-omap2-mcspi.c               |    9 +---
 drivers/spi/spi-orion.c                     |    3 +-
 drivers/spi/spi-ti-qspi.c                   |    5 +-
 drivers/spi/spi.c                           |    6 +--
 drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
 drivers/usb/musb/omap2430.c                 |    6 +--
 drivers/video/fbdev/auo_k190x.c             |    9 +---
 include/linux/pm_runtime.h                  |    6 +++
 31 files changed, 97 insertions(+), 177 deletions(-)


Thanks
-- 
~Vinod

[PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
  spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: orion: use pm_runtime_last_busy_and_autosuspend helper
  spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
  spi: core: use pm_runtime_last_busy_and_autosuspend helper
  tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
  usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
  video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

 Documentation/power/runtime_pm.txt          |    4 ++
 drivers/dma/ste_dma40.c                     |   30 ++++---------
 drivers/extcon/extcon-arizona.c             |    6 +--
 drivers/gpu/drm/i915/intel_pm.c             |    3 +-
 drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
 drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
 drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
 drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
 drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
 drivers/gpu/vga/vga_switcheroo.c            |    7 +--
 drivers/i2c/busses/i2c-designware-core.c    |    3 +-
 drivers/i2c/busses/i2c-omap.c               |    6 +--
 drivers/i2c/busses/i2c-qup.c                |    3 +-
 drivers/mfd/ab8500-gpadc.c                  |    6 +--
 drivers/mfd/arizona-irq.c                   |    3 +-
 drivers/misc/mei/client.c                   |   12 ++----
 drivers/mmc/core/core.c                     |    3 +-
 drivers/mmc/host/mmci.c                     |   12 ++----
 drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
 drivers/mmc/host/sdhci-pxav3.c              |    6 +--
 drivers/mmc/host/sdhci.c                    |    3 +-
 drivers/nfc/trf7970a.c                      |    3 +-
 drivers/power/pm2301_charger.c              |    3 +-
 drivers/spi/spi-omap2-mcspi.c               |    9 +---
 drivers/spi/spi-orion.c                     |    3 +-
 drivers/spi/spi-ti-qspi.c                   |    5 +-
 drivers/spi/spi.c                           |    6 +--
 drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
 drivers/usb/musb/omap2430.c                 |    6 +--
 drivers/video/fbdev/auo_k190x.c             |    9 +---
 include/linux/pm_runtime.h                  |    6 +++
 31 files changed, 97 insertions(+), 177 deletions(-)


Thanks
-- 
~Vinod

[PATCH 01/27] PM: Add helper pm_runtime_last_busy_and_autosuspend()

[Vinod Koul]

From: Subhransu S. Prusty <subhransu.s.prusty@intel.com>

pm_runtime_mark_last_busy and pm_runtime_put_autosuspend are used together
in quite a lot of places. Add a helper for these.
Also updated Documentation for this

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 Documentation/power/runtime_pm.txt |    4 ++++
 include/linux/pm_runtime.h         |    6 ++++++
 2 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index f32ce54..5d9565b 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -490,6 +490,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       power.use_autosuspend isn't set, otherwise returns the expiration time
       in jiffies
 
+   int pm_runtime_last_busy_and_autosuspend(struct device *dev);
+    - invoke pm_runtime_mark_last_busy(dev) and then run
+      pm_runtime_put_autosuspend(dev) and return its result
+
 It is safe to execute the following helper functions from interrupt context:
 
 pm_request_idle()
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 367f49b..256ec50 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -277,4 +277,10 @@ static inline void pm_runtime_dont_use_autosuspend(struct device *dev)
 	__pm_runtime_use_autosuspend(dev, false);
 }
 
+static inline int pm_runtime_last_busy_and_autosuspend(struct device *dev)
+{
+	pm_runtime_mark_last_busy(dev);
+	return pm_runtime_put_autosuspend(dev);
+}
+
 #endif
-- 
1.7.0.4

Re: [PATCH 01/27] PM: Add helper pm_runtime_last_busy_and_autosuspend()

[Pavel Machek]

On Wed 2014-09-24 21:44:51, Vinod Koul wrote:
> From: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
> 
> pm_runtime_mark_last_busy and pm_runtime_put_autosuspend are used together
> in quite a lot of places. Add a helper for these.
> Also updated Documentation for this

With function name as long as the implementation... I'm not sure if
this is good helper :-).
									Pavel

> +static inline int pm_runtime_last_busy_and_autosuspend(struct device *dev)
> +{
> +	pm_runtime_mark_last_busy(dev);
> +	return pm_runtime_put_autosuspend(dev);
> +}

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [PATCH 01/27] PM: Add helper pm_runtime_last_busy_and_autosuspend()

[Vinod Koul]

On Wed, Sep 24, 2014 at 07:54:10PM +0200, Pavel Machek wrote:
> On Wed 2014-09-24 21:44:51, Vinod Koul wrote:
> > From: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
> > 
> > pm_runtime_mark_last_busy and pm_runtime_put_autosuspend are used together
> > in quite a lot of places. Add a helper for these.
> > Also updated Documentation for this
> 
> With function name as long as the implementation... I'm not sure if
> this is good helper :-).
am all ears if that is a general consensus to cut down on length and
suggestions welcome :)

-- 
~Vinod

> 									Pavel
> 
> > +static inline int pm_runtime_last_busy_and_autosuspend(struct device *dev)
> > +{
> > +	pm_runtime_mark_last_busy(dev);
> > +	return pm_runtime_put_autosuspend(dev);
> > +}
> 
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

-- 

Re: [PATCH 01/27] PM: Add helper pm_runtime_last_busy_and_autosuspend()

[Ulf Hansson]

On 24 September 2014 18:14, Vinod Koul <vinod.koul@intel.com> wrote:
> From: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
>
> pm_runtime_mark_last_busy and pm_runtime_put_autosuspend are used together
> in quite a lot of places. Add a helper for these.
> Also updated Documentation for this
>
> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---
>  Documentation/power/runtime_pm.txt |    4 ++++
>  include/linux/pm_runtime.h         |    6 ++++++
>  2 files changed, 10 insertions(+), 0 deletions(-)
>
> diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
> index f32ce54..5d9565b 100644
> --- a/Documentation/power/runtime_pm.txt
> +++ b/Documentation/power/runtime_pm.txt
> @@ -490,6 +490,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
>        power.use_autosuspend isn't set, otherwise returns the expiration time
>        in jiffies
>
> +   int pm_runtime_last_busy_and_autosuspend(struct device *dev);
> +    - invoke pm_runtime_mark_last_busy(dev) and then run
> +      pm_runtime_put_autosuspend(dev) and return its result
> +
>  It is safe to execute the following helper functions from interrupt context:
>
>  pm_request_idle()
> diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
> index 367f49b..256ec50 100644
> --- a/include/linux/pm_runtime.h
> +++ b/include/linux/pm_runtime.h
> @@ -277,4 +277,10 @@ static inline void pm_runtime_dont_use_autosuspend(struct device *dev)
>         __pm_runtime_use_autosuspend(dev, false);
>  }
>
> +static inline int pm_runtime_last_busy_and_autosuspend(struct device *dev)

This doesn't help code readability I think. The function name is quite
long as Pavel also pointed out. :-)

And, I also lack the "put" prefix, following the other functions in
the runtime PM API - which would make the name even longer. :-)

Kind regards
Uffe

[PATCH 02/27] dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/dma/ste_dma40.c |   30 ++++++++++--------------------
 1 files changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 5fe5933..621b941 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1442,8 +1442,7 @@ static int d40_pause(struct d40_chan *d40c)
 
 	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
 
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return res;
 }
@@ -1463,8 +1462,7 @@ static int d40_resume(struct d40_chan *d40c)
 	if (d40_residue(d40c) || d40_tx_is_linked(d40c))
 		res = d40_channel_execute_command(d40c, D40_DMA_RUN);
 
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return res;
 }
@@ -1565,8 +1563,7 @@ static void dma_tc_handle(struct d40_chan *d40c)
 		if (d40_queue_start(d40c) == NULL) {
 			d40c->busy = false;
 
-			pm_runtime_mark_last_busy(d40c->base->dev);
-			pm_runtime_put_autosuspend(d40c->base->dev);
+			pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 		}
 
 		d40_desc_remove(d40d);
@@ -2045,18 +2042,15 @@ static int d40_free_dma(struct d40_chan *d40c)
 	else
 		d40c->base->lookup_phy_chans[phy->num] = NULL;
 
-	if (d40c->busy) {
-		pm_runtime_mark_last_busy(d40c->base->dev);
-		pm_runtime_put_autosuspend(d40c->base->dev);
-	}
+	if (d40c->busy)
+		pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 
 	d40c->busy = false;
 	d40c->phy_chan = NULL;
 	d40c->configured = false;
 out:
 
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	return res;
 }
 
@@ -2457,8 +2451,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
 	if (is_free_phy)
 		d40_config_write(d40c);
 fail:
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return err;
 }
@@ -2618,12 +2611,9 @@ static void d40_terminate_all(struct dma_chan *chan)
 		chan_err(d40c, "Failed to stop channel\n");
 
 	d40_term_all(d40c);
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
-	if (d40c->busy) {
-		pm_runtime_mark_last_busy(d40c->base->dev);
-		pm_runtime_put_autosuspend(d40c->base->dev);
-	}
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
+	if (d40c->busy)
+		pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	d40c->busy = false;
 
 	spin_unlock_irqrestore(&d40c->lock, flags);
-- 
1.7.0.4

[PATCH 02/27] dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/dma/ste_dma40.c |   30 ++++++++++--------------------
 1 files changed, 10 insertions(+), 20 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 5fe5933..621b941 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1442,8 +1442,7 @@ static int d40_pause(struct d40_chan *d40c)
 
 	res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
 
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return res;
 }
@@ -1463,8 +1462,7 @@ static int d40_resume(struct d40_chan *d40c)
 	if (d40_residue(d40c) || d40_tx_is_linked(d40c))
 		res = d40_channel_execute_command(d40c, D40_DMA_RUN);
 
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return res;
 }
@@ -1565,8 +1563,7 @@ static void dma_tc_handle(struct d40_chan *d40c)
 		if (d40_queue_start(d40c) == NULL) {
 			d40c->busy = false;
 
-			pm_runtime_mark_last_busy(d40c->base->dev);
-			pm_runtime_put_autosuspend(d40c->base->dev);
+			pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 		}
 
 		d40_desc_remove(d40d);
@@ -2045,18 +2042,15 @@ static int d40_free_dma(struct d40_chan *d40c)
 	else
 		d40c->base->lookup_phy_chans[phy->num] = NULL;
 
-	if (d40c->busy) {
-		pm_runtime_mark_last_busy(d40c->base->dev);
-		pm_runtime_put_autosuspend(d40c->base->dev);
-	}
+	if (d40c->busy)
+		pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 
 	d40c->busy = false;
 	d40c->phy_chan = NULL;
 	d40c->configured = false;
 out:
 
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	return res;
 }
 
@@ -2457,8 +2451,7 @@ static int d40_alloc_chan_resources(struct dma_chan *chan)
 	if (is_free_phy)
 		d40_config_write(d40c);
 fail:
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	spin_unlock_irqrestore(&d40c->lock, flags);
 	return err;
 }
@@ -2618,12 +2611,9 @@ static void d40_terminate_all(struct dma_chan *chan)
 		chan_err(d40c, "Failed to stop channel\n");
 
 	d40_term_all(d40c);
-	pm_runtime_mark_last_busy(d40c->base->dev);
-	pm_runtime_put_autosuspend(d40c->base->dev);
-	if (d40c->busy) {
-		pm_runtime_mark_last_busy(d40c->base->dev);
-		pm_runtime_put_autosuspend(d40c->base->dev);
-	}
+	pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
+	if (d40c->busy)
+		pm_runtime_last_busy_and_autosuspend(d40c->base->dev);
 	d40c->busy = false;
 
 	spin_unlock_irqrestore(&d40c->lock, flags);
-- 
1.7.0.4

Re: [PATCH 02/27] dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper

[Linus Walleij]

On Wed, Sep 24, 2014 at 6:14 PM, Vinod Koul <vinod.koul@intel.com> wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH 02/27] dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper

[Linus Walleij]

On Wed, Sep 24, 2014 at 6:14 PM, Vinod Koul <vinod.koul@intel.com> wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH 03/27] extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/extcon/extcon-arizona.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index ba51588..7774e80 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -323,8 +323,7 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
 
 	if (change) {
 		regulator_disable(info->micvdd);
-		pm_runtime_mark_last_busy(info->dev);
-		pm_runtime_put_autosuspend(info->dev);
+		pm_runtime_last_busy_and_autosuspend(info->dev);
 	}
 }
 
@@ -1077,8 +1076,7 @@ out:
 
 	mutex_unlock(&info->lock);
 
-	pm_runtime_mark_last_busy(info->dev);
-	pm_runtime_put_autosuspend(info->dev);
+	pm_runtime_last_busy_and_autosuspend(info->dev);
 
 	return IRQ_HANDLED;
 }
-- 
1.7.0.4

Re: [PATCH 03/27] extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Chanwoo Choi]

On 09/25/2014 01:14 AM, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---
>  drivers/extcon/extcon-arizona.c |    6 ++----
>  1 files changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index ba51588..7774e80 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -323,8 +323,7 @@ static void arizona_stop_mic(struct arizona_extcon_info *info)
>  
>  	if (change) {
>  		regulator_disable(info->micvdd);
> -		pm_runtime_mark_last_busy(info->dev);
> -		pm_runtime_put_autosuspend(info->dev);
> +		pm_runtime_last_busy_and_autosuspend(info->dev);
>  	}
>  }
>  
> @@ -1077,8 +1076,7 @@ out:
>  
>  	mutex_unlock(&info->lock);
>  
> -	pm_runtime_mark_last_busy(info->dev);
> -	pm_runtime_put_autosuspend(info->dev);
> +	pm_runtime_last_busy_and_autosuspend(info->dev);
>  
>  	return IRQ_HANDLED;
>  }
> 

Looks good to me about this patch.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

Thanks,
Chanwoo Choi

Re: [PATCH 03/27] extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Charles Keepax]

On Wed, Sep 24, 2014 at 09:44:53PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---

Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

Thanks,
Charles

[PATCH 04/27] drm/i915: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 40c1229..1ec9b8d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6729,8 +6729,7 @@ void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
 	if (!HAS_RUNTIME_PM(dev))
 		return;
 
-	pm_runtime_mark_last_busy(device);
-	pm_runtime_put_autosuspend(device);
+	pm_runtime_last_busy_and_autosuspend(device);
 }
 
 void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
-- 
1.7.0.4

[PATCH 04/27] drm/i915: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 40c1229..1ec9b8d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6729,8 +6729,7 @@ void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
 	if (!HAS_RUNTIME_PM(dev))
 		return;
 
-	pm_runtime_mark_last_busy(device);
-	pm_runtime_put_autosuspend(device);
+	pm_runtime_last_busy_and_autosuspend(device);
 }
 
 void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
-- 
1.7.0.4

Re: [PATCH 04/27] drm/i915: use pm_runtime_last_busy_and_autosuspend helper

[Daniel Vetter]

On Wed, Sep 24, 2014 at 09:44:54PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Ack to merge through whatever tree is appropriate for this. Or tell me
when I should pick this up for drm-intel.
-Daniel
> ---
>  drivers/gpu/drm/i915/intel_pm.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 40c1229..1ec9b8d 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -6729,8 +6729,7 @@ void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
>  	if (!HAS_RUNTIME_PM(dev))
>  		return;
>  
> -	pm_runtime_mark_last_busy(device);
> -	pm_runtime_put_autosuspend(device);
> +	pm_runtime_last_busy_and_autosuspend(device);
>  }
>  
>  void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
> -- 
> 1.7.0.4
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

Re: [PATCH 04/27] drm/i915: use pm_runtime_last_busy_and_autosuspend helper

[Daniel Vetter]

On Wed, Sep 24, 2014 at 09:44:54PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Ack to merge through whatever tree is appropriate for this. Or tell me
when I should pick this up for drm-intel.
-Daniel
> ---
>  drivers/gpu/drm/i915/intel_pm.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 40c1229..1ec9b8d 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -6729,8 +6729,7 @@ void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
>  	if (!HAS_RUNTIME_PM(dev))
>  		return;
>  
> -	pm_runtime_mark_last_busy(device);
> -	pm_runtime_put_autosuspend(device);
> +	pm_runtime_last_busy_and_autosuspend(device);
>  }
>  
>  void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
> -- 
> 1.7.0.4
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch

[PATCH 05/27] drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +--
 drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +++------
 2 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 1ec44c8..0e3108a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -323,8 +323,7 @@ detect_analog:
 
  out:
 
-	pm_runtime_mark_last_busy(connector->dev->dev);
-	pm_runtime_put_autosuspend(connector->dev->dev);
+	pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
 
 	return conn_status;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_drm.c b/drivers/gpu/drm/nouveau/nouveau_drm.c
index 250a5e8..719eabf 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -766,8 +766,7 @@ nouveau_drm_open(struct drm_device *dev, struct drm_file *fpriv)
 	mutex_unlock(&drm->client.mutex);
 
 out_suspend:
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 
 	return ret;
 }
@@ -794,8 +793,7 @@ nouveau_drm_postclose(struct drm_device *dev, struct drm_file *fpriv)
 {
 	struct nouveau_cli *cli = nouveau_cli(fpriv);
 	nouveau_cli_destroy(cli);
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 }
 
 static const struct drm_ioctl_desc
@@ -834,8 +832,7 @@ nouveau_drm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 	}
 
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 	return ret;
 }
 
-- 
1.7.0.4

[PATCH 06/27] drm/radeon: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/gpu/drm/radeon/radeon_connectors.c |   15 +++++----------
 drivers/gpu/drm/radeon/radeon_drv.c        |    5 ++---
 drivers/gpu/drm/radeon/radeon_kms.c        |    6 ++----
 3 files changed, 9 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 300c4b3..b48cf9d 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -852,8 +852,7 @@ radeon_lvds_detect(struct drm_connector *connector, bool force)
 	/* check acpi lid status ??? */
 
 	radeon_connector_update_scratch_regs(connector, ret);
-	pm_runtime_mark_last_busy(connector->dev->dev);
-	pm_runtime_put_autosuspend(connector->dev->dev);
+	pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
 	return ret;
 }
 
@@ -1025,8 +1024,7 @@ radeon_vga_detect(struct drm_connector *connector, bool force)
 	radeon_connector_update_scratch_regs(connector, ret);
 
 out:
-	pm_runtime_mark_last_busy(connector->dev->dev);
-	pm_runtime_put_autosuspend(connector->dev->dev);
+	pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
 
 	return ret;
 }
@@ -1103,8 +1101,7 @@ radeon_tv_detect(struct drm_connector *connector, bool force)
 	if (ret == connector_status_connected)
 		ret = radeon_connector_analog_encoder_conflict_solve(connector, encoder, ret, false);
 	radeon_connector_update_scratch_regs(connector, ret);
-	pm_runtime_mark_last_busy(connector->dev->dev);
-	pm_runtime_put_autosuspend(connector->dev->dev);
+	pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
 	return ret;
 }
 
@@ -1321,8 +1318,7 @@ out:
 	radeon_connector_update_scratch_regs(connector, ret);
 
 exit:
-	pm_runtime_mark_last_busy(connector->dev->dev);
-	pm_runtime_put_autosuspend(connector->dev->dev);
+	pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
 
 	return ret;
 }
@@ -1638,8 +1634,7 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
 
 	radeon_connector_update_scratch_regs(connector, ret);
 out:
-	pm_runtime_mark_last_busy(connector->dev->dev);
-	pm_runtime_put_autosuspend(connector->dev->dev);
+	pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
 
 	return ret;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 092d067..548d129 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -503,9 +503,8 @@ long radeon_drm_ioctl(struct file *filp,
 		return ret;
 
 	ret = drm_ioctl(filp, cmd, arg);
-	
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index eb7164d..80f061d 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -147,8 +147,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
 		pm_runtime_allow(dev->dev);
-		pm_runtime_mark_last_busy(dev->dev);
-		pm_runtime_put_autosuspend(dev->dev);
+		pm_runtime_last_busy_and_autosuspend(dev->dev);
 	}
 
 out:
@@ -632,8 +631,7 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
 		file_priv->driver_priv = fpriv;
 	}
 
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 	return 0;
 }
 
-- 
1.7.0.4

Re: [PATCH 06/27] drm/radeon: use pm_runtime_last_busy_and_autosuspend helper

[Alex Deucher]

On Wed, Sep 24, 2014 at 12:14 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Acked-by: Alex Deucher <alexander.deucher@amd.com>

I don't care which tree this goes through.

> ---
>  drivers/gpu/drm/radeon/radeon_connectors.c |   15 +++++----------
>  drivers/gpu/drm/radeon/radeon_drv.c        |    5 ++---
>  drivers/gpu/drm/radeon/radeon_kms.c        |    6 ++----
>  3 files changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
> index 300c4b3..b48cf9d 100644
> --- a/drivers/gpu/drm/radeon/radeon_connectors.c
> +++ b/drivers/gpu/drm/radeon/radeon_connectors.c
> @@ -852,8 +852,7 @@ radeon_lvds_detect(struct drm_connector *connector, bool force)
>         /* check acpi lid status ??? */
>
>         radeon_connector_update_scratch_regs(connector, ret);
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>         return ret;
>  }
>
> @@ -1025,8 +1024,7 @@ radeon_vga_detect(struct drm_connector *connector, bool force)
>         radeon_connector_update_scratch_regs(connector, ret);
>
>  out:
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>
>         return ret;
>  }
> @@ -1103,8 +1101,7 @@ radeon_tv_detect(struct drm_connector *connector, bool force)
>         if (ret == connector_status_connected)
>                 ret = radeon_connector_analog_encoder_conflict_solve(connector, encoder, ret, false);
>         radeon_connector_update_scratch_regs(connector, ret);
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>         return ret;
>  }
>
> @@ -1321,8 +1318,7 @@ out:
>         radeon_connector_update_scratch_regs(connector, ret);
>
>  exit:
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>
>         return ret;
>  }
> @@ -1638,8 +1634,7 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
>
>         radeon_connector_update_scratch_regs(connector, ret);
>  out:
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>
>         return ret;
>  }
> diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
> index 092d067..548d129 100644
> --- a/drivers/gpu/drm/radeon/radeon_drv.c
> +++ b/drivers/gpu/drm/radeon/radeon_drv.c
> @@ -503,9 +503,8 @@ long radeon_drm_ioctl(struct file *filp,
>                 return ret;
>
>         ret = drm_ioctl(filp, cmd, arg);
> -
> -       pm_runtime_mark_last_busy(dev->dev);
> -       pm_runtime_put_autosuspend(dev->dev);
> +
> +       pm_runtime_last_busy_and_autosuspend(dev->dev);
>         return ret;
>  }
>
> diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
> index eb7164d..80f061d 100644
> --- a/drivers/gpu/drm/radeon/radeon_kms.c
> +++ b/drivers/gpu/drm/radeon/radeon_kms.c
> @@ -147,8 +147,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
>                 pm_runtime_set_autosuspend_delay(dev->dev, 5000);
>                 pm_runtime_set_active(dev->dev);
>                 pm_runtime_allow(dev->dev);
> -               pm_runtime_mark_last_busy(dev->dev);
> -               pm_runtime_put_autosuspend(dev->dev);
> +               pm_runtime_last_busy_and_autosuspend(dev->dev);
>         }
>
>  out:
> @@ -632,8 +631,7 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
>                 file_priv->driver_priv = fpriv;
>         }
>
> -       pm_runtime_mark_last_busy(dev->dev);
> -       pm_runtime_put_autosuspend(dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(dev->dev);
>         return 0;
>  }
>
> --
> 1.7.0.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 06/27] drm/radeon: use pm_runtime_last_busy_and_autosuspend helper

[Alex Deucher]

On Wed, Sep 24, 2014 at 12:14 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Acked-by: Alex Deucher <alexander.deucher@amd.com>

I don't care which tree this goes through.

> ---
>  drivers/gpu/drm/radeon/radeon_connectors.c |   15 +++++----------
>  drivers/gpu/drm/radeon/radeon_drv.c        |    5 ++---
>  drivers/gpu/drm/radeon/radeon_kms.c        |    6 ++----
>  3 files changed, 9 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
> index 300c4b3..b48cf9d 100644
> --- a/drivers/gpu/drm/radeon/radeon_connectors.c
> +++ b/drivers/gpu/drm/radeon/radeon_connectors.c
> @@ -852,8 +852,7 @@ radeon_lvds_detect(struct drm_connector *connector, bool force)
>         /* check acpi lid status ??? */
>
>         radeon_connector_update_scratch_regs(connector, ret);
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>         return ret;
>  }
>
> @@ -1025,8 +1024,7 @@ radeon_vga_detect(struct drm_connector *connector, bool force)
>         radeon_connector_update_scratch_regs(connector, ret);
>
>  out:
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>
>         return ret;
>  }
> @@ -1103,8 +1101,7 @@ radeon_tv_detect(struct drm_connector *connector, bool force)
>         if (ret == connector_status_connected)
>                 ret = radeon_connector_analog_encoder_conflict_solve(connector, encoder, ret, false);
>         radeon_connector_update_scratch_regs(connector, ret);
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>         return ret;
>  }
>
> @@ -1321,8 +1318,7 @@ out:
>         radeon_connector_update_scratch_regs(connector, ret);
>
>  exit:
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>
>         return ret;
>  }
> @@ -1638,8 +1634,7 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
>
>         radeon_connector_update_scratch_regs(connector, ret);
>  out:
> -       pm_runtime_mark_last_busy(connector->dev->dev);
> -       pm_runtime_put_autosuspend(connector->dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(connector->dev->dev);
>
>         return ret;
>  }
> diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
> index 092d067..548d129 100644
> --- a/drivers/gpu/drm/radeon/radeon_drv.c
> +++ b/drivers/gpu/drm/radeon/radeon_drv.c
> @@ -503,9 +503,8 @@ long radeon_drm_ioctl(struct file *filp,
>                 return ret;
>
>         ret = drm_ioctl(filp, cmd, arg);
> -
> -       pm_runtime_mark_last_busy(dev->dev);
> -       pm_runtime_put_autosuspend(dev->dev);
> +
> +       pm_runtime_last_busy_and_autosuspend(dev->dev);
>         return ret;
>  }
>
> diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
> index eb7164d..80f061d 100644
> --- a/drivers/gpu/drm/radeon/radeon_kms.c
> +++ b/drivers/gpu/drm/radeon/radeon_kms.c
> @@ -147,8 +147,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
>                 pm_runtime_set_autosuspend_delay(dev->dev, 5000);
>                 pm_runtime_set_active(dev->dev);
>                 pm_runtime_allow(dev->dev);
> -               pm_runtime_mark_last_busy(dev->dev);
> -               pm_runtime_put_autosuspend(dev->dev);
> +               pm_runtime_last_busy_and_autosuspend(dev->dev);
>         }
>
>  out:
> @@ -632,8 +631,7 @@ int radeon_driver_open_kms(struct drm_device *dev, struct drm_file *file_priv)
>                 file_priv->driver_priv = fpriv;
>         }
>
> -       pm_runtime_mark_last_busy(dev->dev);
> -       pm_runtime_put_autosuspend(dev->dev);
> +       pm_runtime_last_busy_and_autosuspend(dev->dev);
>         return 0;
>  }
>
> --
> 1.7.0.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 07/27] vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/gpu/vga/vga_switcheroo.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
index 6866448..697ffbd 100644
--- a/drivers/gpu/vga/vga_switcheroo.c
+++ b/drivers/gpu/vga/vga_switcheroo.c
@@ -682,10 +682,9 @@ static int vga_switcheroo_runtime_resume_hdmi_audio(struct device *dev)
 	ret = dev->bus->pm->runtime_resume(dev);
 
 	/* put the reference for the gpu */
-	if (found) {
-		pm_runtime_mark_last_busy(&found->pdev->dev);
-		pm_runtime_put_autosuspend(&found->pdev->dev);
-	}
+	if (found)
+		pm_runtime_last_busy_and_autosuspend(&found->pdev->dev);
+
 	return ret;
 }
 
-- 
1.7.0.4

Re: [PATCH 07/27] vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper

[Alex Deucher]

On Wed, Sep 24, 2014 at 12:14 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Acked-by: Alex Deucher <alexander.deucher@amd.com>

> ---
>  drivers/gpu/vga/vga_switcheroo.c |    7 +++----
>  1 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
> index 6866448..697ffbd 100644
> --- a/drivers/gpu/vga/vga_switcheroo.c
> +++ b/drivers/gpu/vga/vga_switcheroo.c
> @@ -682,10 +682,9 @@ static int vga_switcheroo_runtime_resume_hdmi_audio(struct device *dev)
>         ret = dev->bus->pm->runtime_resume(dev);
>
>         /* put the reference for the gpu */
> -       if (found) {
> -               pm_runtime_mark_last_busy(&found->pdev->dev);
> -               pm_runtime_put_autosuspend(&found->pdev->dev);
> -       }
> +       if (found)
> +               pm_runtime_last_busy_and_autosuspend(&found->pdev->dev);
> +
>         return ret;
>  }
>
> --
> 1.7.0.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 07/27] vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper

[Alex Deucher]

On Wed, Sep 24, 2014 at 12:14 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Acked-by: Alex Deucher <alexander.deucher@amd.com>

> ---
>  drivers/gpu/vga/vga_switcheroo.c |    7 +++----
>  1 files changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/vga/vga_switcheroo.c b/drivers/gpu/vga/vga_switcheroo.c
> index 6866448..697ffbd 100644
> --- a/drivers/gpu/vga/vga_switcheroo.c
> +++ b/drivers/gpu/vga/vga_switcheroo.c
> @@ -682,10 +682,9 @@ static int vga_switcheroo_runtime_resume_hdmi_audio(struct device *dev)
>         ret = dev->bus->pm->runtime_resume(dev);
>
>         /* put the reference for the gpu */
> -       if (found) {
> -               pm_runtime_mark_last_busy(&found->pdev->dev);
> -               pm_runtime_put_autosuspend(&found->pdev->dev);
> -       }
> +       if (found)
> +               pm_runtime_last_busy_and_autosuspend(&found->pdev->dev);
> +
>         return ret;
>  }
>
> --
> 1.7.0.4
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 08/27] i2c: designware: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/i2c/busses/i2c-designware-core.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 3c20e4b..13aa1cc 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -676,8 +676,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	ret = -EIO;
 
 done:
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 	mutex_unlock(&dev->lock);
 
 	return ret;
-- 
1.7.0.4

[PATCH 08/27] i2c: designware: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/i2c/busses/i2c-designware-core.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 3c20e4b..13aa1cc 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -676,8 +676,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	ret = -EIO;
 
 done:
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 	mutex_unlock(&dev->lock);
 
 	return ret;
-- 
1.7.0.4

[PATCH 09/27] i2c: omap: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/i2c/busses/i2c-omap.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0dffb0e..8a7de50 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -661,8 +661,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		dev->set_mpu_wkup_lat(dev->dev, -1);
 
 out:
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 	return r;
 }
 
@@ -1253,8 +1252,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
 		 major, minor, dev->speed);
 
-	pm_runtime_mark_last_busy(dev->dev);
-	pm_runtime_put_autosuspend(dev->dev);
+	pm_runtime_last_busy_and_autosuspend(dev->dev);
 
 	return 0;
 
-- 
1.7.0.4

[PATCH 10/27] i2c: qup: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/i2c/busses/i2c-qup.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index 3a4d64e..9ada3ee 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -518,8 +518,7 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
 		ret = num;
 out:
 
-	pm_runtime_mark_last_busy(qup->dev);
-	pm_runtime_put_autosuspend(qup->dev);
+	pm_runtime_last_busy_and_autosuspend(qup->dev);
 
 	return ret;
 }
-- 
1.7.0.4

[PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mfd/ab8500-gpadc.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 36000f9..46bea3a 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 	}
 
 	/* Disable VTVout LDO this is required for GPADC */
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
+	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
 
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 
@@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
 	if (ret)
 		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
 
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
+	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
 
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	return ret;
-- 
1.7.0.4

[PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mfd/ab8500-gpadc.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index 36000f9..46bea3a 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 	}
 
 	/* Disable VTVout LDO this is required for GPADC */
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
+	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
 
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 
@@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
 	if (ret)
 		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
 
-	pm_runtime_mark_last_busy(gpadc->dev);
-	pm_runtime_put_autosuspend(gpadc->dev);
+	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
 
 	mutex_unlock(&gpadc->ab8500_gpadc_lock);
 	return ret;
-- 
1.7.0.4

Re: [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Linus Walleij]

On Wed, Sep 24, 2014 at 6:15 PM, Vinod Koul <vinod.koul@intel.com> wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

[PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Linus Walleij]

On Wed, Sep 24, 2014 at 6:15 PM, Vinod Koul <vinod.koul@intel.com> wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
>
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Lee Jones]

On Wed, 24 Sep 2014, Vinod Koul wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---
>  drivers/mfd/ab8500-gpadc.c |    6 ++----
>  1 files changed, 2 insertions(+), 4 deletions(-)

Applied with Linus' Ack.

> diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
> index 36000f9..46bea3a 100644
> --- a/drivers/mfd/ab8500-gpadc.c
> +++ b/drivers/mfd/ab8500-gpadc.c
> @@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
>  	}
>  
>  	/* Disable VTVout LDO this is required for GPADC */
> -	pm_runtime_mark_last_busy(gpadc->dev);
> -	pm_runtime_put_autosuspend(gpadc->dev);
> +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
>  
>  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
>  
> @@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
>  	if (ret)
>  		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
>  
> -	pm_runtime_mark_last_busy(gpadc->dev);
> -	pm_runtime_put_autosuspend(gpadc->dev);
> +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
>  
>  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
>  	return ret;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Lee Jones]

On Wed, 24 Sep 2014, Vinod Koul wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---
>  drivers/mfd/ab8500-gpadc.c |    6 ++----
>  1 files changed, 2 insertions(+), 4 deletions(-)

Applied with Linus' Ack.

> diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
> index 36000f9..46bea3a 100644
> --- a/drivers/mfd/ab8500-gpadc.c
> +++ b/drivers/mfd/ab8500-gpadc.c
> @@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
>  	}
>  
>  	/* Disable VTVout LDO this is required for GPADC */
> -	pm_runtime_mark_last_busy(gpadc->dev);
> -	pm_runtime_put_autosuspend(gpadc->dev);
> +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
>  
>  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
>  
> @@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
>  	if (ret)
>  		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
>  
> -	pm_runtime_mark_last_busy(gpadc->dev);
> -	pm_runtime_put_autosuspend(gpadc->dev);
> +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
>  
>  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
>  	return ret;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Lee Jones]

On Mon, 06 Oct 2014, Lee Jones wrote:

> On Wed, 24 Sep 2014, Vinod Koul wrote:
> 
> > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > coding the same code
> > 
> > Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> > ---
> >  drivers/mfd/ab8500-gpadc.c |    6 ++----
> >  1 files changed, 2 insertions(+), 4 deletions(-)
> 
> Applied with Linus' Ack.

Okay, I just had to search online for the other patches (as you left
me off PATCH 00/27).  It appears this approach has gone down like a
lead balloon.  For this reason I'm pulling these patches from my v3.19
branch.

> > diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
> > index 36000f9..46bea3a 100644
> > --- a/drivers/mfd/ab8500-gpadc.c
> > +++ b/drivers/mfd/ab8500-gpadc.c
> > @@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
> >  	}
> >  
> >  	/* Disable VTVout LDO this is required for GPADC */
> > -	pm_runtime_mark_last_busy(gpadc->dev);
> > -	pm_runtime_put_autosuspend(gpadc->dev);
> > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> >  
> >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> >  
> > @@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
> >  	if (ret)
> >  		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
> >  
> > -	pm_runtime_mark_last_busy(gpadc->dev);
> > -	pm_runtime_put_autosuspend(gpadc->dev);
> > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> >  
> >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> >  	return ret;
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Lee Jones]

On Mon, 06 Oct 2014, Lee Jones wrote:

> On Wed, 24 Sep 2014, Vinod Koul wrote:
> 
> > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > coding the same code
> > 
> > Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> > ---
> >  drivers/mfd/ab8500-gpadc.c |    6 ++----
> >  1 files changed, 2 insertions(+), 4 deletions(-)
> 
> Applied with Linus' Ack.

Okay, I just had to search online for the other patches (as you left
me off PATCH 00/27).  It appears this approach has gone down like a
lead balloon.  For this reason I'm pulling these patches from my v3.19
branch.

> > diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
> > index 36000f9..46bea3a 100644
> > --- a/drivers/mfd/ab8500-gpadc.c
> > +++ b/drivers/mfd/ab8500-gpadc.c
> > @@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
> >  	}
> >  
> >  	/* Disable VTVout LDO this is required for GPADC */
> > -	pm_runtime_mark_last_busy(gpadc->dev);
> > -	pm_runtime_put_autosuspend(gpadc->dev);
> > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> >  
> >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> >  
> > @@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
> >  	if (ret)
> >  		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
> >  
> > -	pm_runtime_mark_last_busy(gpadc->dev);
> > -	pm_runtime_put_autosuspend(gpadc->dev);
> > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> >  
> >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> >  	return ret;
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

On Tue, Oct 07, 2014 at 08:21:25AM +0100, Lee Jones wrote:
> On Mon, 06 Oct 2014, Lee Jones wrote:
> 
> > On Wed, 24 Sep 2014, Vinod Koul wrote:
> > 
> > > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > > coding the same code
> > > 
> > > Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> > > ---
> > >  drivers/mfd/ab8500-gpadc.c |    6 ++----
> > >  1 files changed, 2 insertions(+), 4 deletions(-)
> > 
> > Applied with Linus' Ack.
> 
> Okay, I just had to search online for the other patches (as you left
> me off PATCH 00/27).  It appears this approach has gone down like a
> lead balloon.  For this reason I'm pulling these patches from my v3.19
> branch.
I was about to reply to you to revert.
I need to fix the script I used to do CC on 0th patch, looks like few
people were left off while collecting the names. Sorry about that

-- 
~Vinod

> 
> > > diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
> > > index 36000f9..46bea3a 100644
> > > --- a/drivers/mfd/ab8500-gpadc.c
> > > +++ b/drivers/mfd/ab8500-gpadc.c
> > > @@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
> > >  	}
> > >  
> > >  	/* Disable VTVout LDO this is required for GPADC */
> > > -	pm_runtime_mark_last_busy(gpadc->dev);
> > > -	pm_runtime_put_autosuspend(gpadc->dev);
> > > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> > >  
> > >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> > >  
> > > @@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
> > >  	if (ret)
> > >  		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
> > >  
> > > -	pm_runtime_mark_last_busy(gpadc->dev);
> > > -	pm_runtime_put_autosuspend(gpadc->dev);
> > > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> > >  
> > >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> > >  	return ret;
> > 
> 
> -- 
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog

-- 

[PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

On Tue, Oct 07, 2014 at 08:21:25AM +0100, Lee Jones wrote:
> On Mon, 06 Oct 2014, Lee Jones wrote:
> 
> > On Wed, 24 Sep 2014, Vinod Koul wrote:
> > 
> > > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > > coding the same code
> > > 
> > > Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> > > ---
> > >  drivers/mfd/ab8500-gpadc.c |    6 ++----
> > >  1 files changed, 2 insertions(+), 4 deletions(-)
> > 
> > Applied with Linus' Ack.
> 
> Okay, I just had to search online for the other patches (as you left
> me off PATCH 00/27).  It appears this approach has gone down like a
> lead balloon.  For this reason I'm pulling these patches from my v3.19
> branch.
I was about to reply to you to revert.
I need to fix the script I used to do CC on 0th patch, looks like few
people were left off while collecting the names. Sorry about that

-- 
~Vinod

> 
> > > diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
> > > index 36000f9..46bea3a 100644
> > > --- a/drivers/mfd/ab8500-gpadc.c
> > > +++ b/drivers/mfd/ab8500-gpadc.c
> > > @@ -571,8 +571,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
> > >  	}
> > >  
> > >  	/* Disable VTVout LDO this is required for GPADC */
> > > -	pm_runtime_mark_last_busy(gpadc->dev);
> > > -	pm_runtime_put_autosuspend(gpadc->dev);
> > > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> > >  
> > >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> > >  
> > > @@ -910,8 +909,7 @@ static int ab8500_gpadc_resume(struct device *dev)
> > >  	if (ret)
> > >  		dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
> > >  
> > > -	pm_runtime_mark_last_busy(gpadc->dev);
> > > -	pm_runtime_put_autosuspend(gpadc->dev);
> > > +	pm_runtime_last_busy_and_autosuspend(gpadc->dev);
> > >  
> > >  	mutex_unlock(&gpadc->ab8500_gpadc_lock);
> > >  	return ret;
> > 
> 
> -- 
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org ? Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog

-- 

[PATCH 12/27] mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mfd/arizona-irq.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index d420dbc..dc755d1 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -138,8 +138,7 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
 		}
 	} while (poll);
 
-	pm_runtime_mark_last_busy(arizona->dev);
-	pm_runtime_put_autosuspend(arizona->dev);
+	pm_runtime_last_busy_and_autosuspend(arizona->dev);
 
 	return IRQ_HANDLED;
 }
-- 
1.7.0.4

Re: [PATCH 12/27] mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Charles Keepax]

On Wed, Sep 24, 2014 at 09:45:02PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---

Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

Thanks,
Charles

Re: [PATCH 12/27] mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Lee Jones]

On Wed, 24 Sep 2014, Vinod Koul wrote:

> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code
> 
> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> ---
>  drivers/mfd/arizona-irq.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)

Applied to v3.19 (same as patch 11), with Charles' Ack.

> diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
> index d420dbc..dc755d1 100644
> --- a/drivers/mfd/arizona-irq.c
> +++ b/drivers/mfd/arizona-irq.c
> @@ -138,8 +138,7 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
>  		}
>  	} while (poll);
>  
> -	pm_runtime_mark_last_busy(arizona->dev);
> -	pm_runtime_put_autosuspend(arizona->dev);
> +	pm_runtime_last_busy_and_autosuspend(arizona->dev);
>  
>  	return IRQ_HANDLED;
>  }

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 12/27] mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper

[Lee Jones]

On Mon, 06 Oct 2014, Lee Jones wrote:

> On Wed, 24 Sep 2014, Vinod Koul wrote:
> 
> > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > coding the same code
> > 
> > Signed-off-by: Vinod Koul <vinod.koul@intel.com>
> > ---
> >  drivers/mfd/arizona-irq.c |    3 +--
> >  1 files changed, 1 insertions(+), 2 deletions(-)
> 
> Applied to v3.19 (same as patch 11), with Charles' Ack.

Okay, I just had to search online for the other patches (as you left
me off PATCH 00/27).  It appears this approach has gone down like a
lead balloon.  For this reason I'm pulling these patches from my v3.19
branch.

> > diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
> > index d420dbc..dc755d1 100644
> > --- a/drivers/mfd/arizona-irq.c
> > +++ b/drivers/mfd/arizona-irq.c
> > @@ -138,8 +138,7 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
> >  		}
> >  	} while (poll);
> >  
> > -	pm_runtime_mark_last_busy(arizona->dev);
> > -	pm_runtime_put_autosuspend(arizona->dev);
> > +	pm_runtime_last_busy_and_autosuspend(arizona->dev);
> >  
> >  	return IRQ_HANDLED;
> >  }
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 13/27] mei: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/misc/mei/client.c |   12 ++++--------
 1 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 324e1de..e522c01 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -519,8 +519,7 @@ int mei_cl_disconnect(struct mei_cl *cl)
 	mei_io_list_flush(&dev->ctrl_wr_list, cl);
 free:
 	cl_dbg(dev, cl, "rpm: autosuspend\n");
-	pm_runtime_mark_last_busy(&dev->pdev->dev);
-	pm_runtime_put_autosuspend(&dev->pdev->dev);
+	pm_runtime_last_busy_and_autosuspend(&dev->pdev->dev);
 
 	mei_io_cb_free(cb);
 	return rets;
@@ -625,8 +624,7 @@ int mei_cl_connect(struct mei_cl *cl, struct file *file)
 
 out:
 	cl_dbg(dev, cl, "rpm: autosuspend\n");
-	pm_runtime_mark_last_busy(&dev->pdev->dev);
-	pm_runtime_put_autosuspend(&dev->pdev->dev);
+	pm_runtime_last_busy_and_autosuspend(&dev->pdev->dev);
 
 	mei_io_cb_free(cb);
 	return rets;
@@ -779,8 +777,7 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length)
 
 out:
 	cl_dbg(dev, cl, "rpm: autosuspend\n");
-	pm_runtime_mark_last_busy(&dev->pdev->dev);
-	pm_runtime_put_autosuspend(&dev->pdev->dev);
+	pm_runtime_last_busy_and_autosuspend(&dev->pdev->dev);
 
 	if (rets)
 		mei_io_cb_free(cb);
@@ -978,8 +975,7 @@ out:
 	rets = buf->size;
 err:
 	cl_dbg(dev, cl, "rpm: autosuspend\n");
-	pm_runtime_mark_last_busy(&dev->pdev->dev);
-	pm_runtime_put_autosuspend(&dev->pdev->dev);
+	pm_runtime_last_busy_and_autosuspend(&dev->pdev->dev);
 
 	return rets;
 }
-- 
1.7.0.4

[PATCH 14/27] mmc: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mmc/core/core.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index d03a080..5081089 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -954,8 +954,7 @@ EXPORT_SYMBOL(mmc_get_card);
 void mmc_put_card(struct mmc_card *card)
 {
 	mmc_release_host(card->host);
-	pm_runtime_mark_last_busy(&card->dev);
-	pm_runtime_put_autosuspend(&card->dev);
+	pm_runtime_last_busy_and_autosuspend(&card->dev);
 }
 EXPORT_SYMBOL(mmc_put_card);
 
-- 
1.7.0.4

[PATCH 15/27] mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mmc/host/mmci.c |   12 ++++--------
 1 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index e4d4707..27dcfba 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -223,8 +223,7 @@ static int mmci_card_busy(struct mmc_host *mmc)
 		busy = 1;
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	pm_runtime_mark_last_busy(mmc_dev(mmc));
-	pm_runtime_put_autosuspend(mmc_dev(mmc));
+	pm_runtime_last_busy_and_autosuspend(mmc_dev(mmc));
 
 	return busy;
 }
@@ -372,8 +371,7 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 
 	mmc_request_done(host->mmc, mrq);
 
-	pm_runtime_mark_last_busy(mmc_dev(host->mmc));
-	pm_runtime_put_autosuspend(mmc_dev(host->mmc));
+	pm_runtime_last_busy_and_autosuspend(mmc_dev(host->mmc));
 }
 
 static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
@@ -1397,8 +1395,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
-	pm_runtime_mark_last_busy(mmc_dev(mmc));
-	pm_runtime_put_autosuspend(mmc_dev(mmc));
+	pm_runtime_last_busy_and_autosuspend(mmc_dev(mmc));
 }
 
 static int mmci_get_cd(struct mmc_host *mmc)
@@ -1442,8 +1439,7 @@ static int mmci_sig_volt_switch(struct mmc_host *mmc, struct mmc_ios *ios)
 		if (ret)
 			dev_warn(mmc_dev(mmc), "Voltage switch failed\n");
 
-		pm_runtime_mark_last_busy(mmc_dev(mmc));
-		pm_runtime_put_autosuspend(mmc_dev(mmc));
+		pm_runtime_last_busy_and_autosuspend(mmc_dev(mmc));
 	}
 
 	return ret;
-- 
1.7.0.4

[PATCH 16/27] mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code
This patch also changes return value from macro rather than 0 always!

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mmc/host/omap_hsmmc.c |   19 ++++---------------
 1 files changed, 4 insertions(+), 15 deletions(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9656726..2a2affc 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1823,10 +1823,7 @@ static int omap_hsmmc_disable_fclk(struct mmc_host *mmc)
 {
 	struct omap_hsmmc_host *host = mmc_priv(mmc);
 
-	pm_runtime_mark_last_busy(host->dev);
-	pm_runtime_put_autosuspend(host->dev);
-
-	return 0;
+	return pm_runtime_last_busy_and_autosuspend(host->dev);
 }
 
 static const struct mmc_host_ops omap_hsmmc_ops = {
@@ -1877,10 +1874,7 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data)
 	seq_printf(s, "CAPA:\t\t0x%08x\n",
 			OMAP_HSMMC_READ(host->base, CAPA));
 
-	pm_runtime_mark_last_busy(host->dev);
-	pm_runtime_put_autosuspend(host->dev);
-
-	return 0;
+	return pm_runtime_last_busy_and_autosuspend(host->dev);
 }
 
 static int omap_hsmmc_regs_open(struct inode *inode, struct file *file)
@@ -2258,10 +2252,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	}
 
 	omap_hsmmc_debugfs(mmc);
-	pm_runtime_mark_last_busy(host->dev);
-	pm_runtime_put_autosuspend(host->dev);
-
-	return 0;
+	return pm_runtime_last_busy_and_autosuspend(host->dev);
 
 err_slot_name:
 	mmc_remove_host(mmc);
@@ -2386,9 +2377,7 @@ static int omap_hsmmc_resume(struct device *dev)
 	    !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ))
 		enable_irq(host->wake_irq);
 
-	pm_runtime_mark_last_busy(host->dev);
-	pm_runtime_put_autosuspend(host->dev);
-	return 0;
+	return pm_runtime_last_busy_and_autosuspend(host->dev);
 }
 
 #else
-- 
1.7.0.4

[PATCH 17/27] mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mmc/host/sdhci-pxav3.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 6f842fb..2706d3f 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -417,8 +417,7 @@ static int sdhci_pxav3_suspend(struct device *dev)
 
 	pm_runtime_get_sync(dev);
 	ret = sdhci_suspend_host(host);
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 
 	return ret;
 }
@@ -430,8 +429,7 @@ static int sdhci_pxav3_resume(struct device *dev)
 
 	pm_runtime_get_sync(dev);
 	ret = sdhci_resume_host(host);
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 
 	return ret;
 }
-- 
1.7.0.4

[PATCH 18/27] mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/mmc/host/sdhci.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 37b2a9a..862346a 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2623,8 +2623,7 @@ static int sdhci_runtime_pm_get(struct sdhci_host *host)
 
 static int sdhci_runtime_pm_put(struct sdhci_host *host)
 {
-	pm_runtime_mark_last_busy(host->mmc->parent);
-	return pm_runtime_put_autosuspend(host->mmc->parent);
+	return pm_runtime_last_busy_and_autosuspend(host->mmc->parent);
 }
 
 static void sdhci_runtime_pm_bus_on(struct sdhci_host *host)
-- 
1.7.0.4

[PATCH 19/27] NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/nfc/trf7970a.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 3b78b03..d22ca2f 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -801,8 +801,7 @@ static void trf7970a_switch_rf_off(struct trf7970a *trf)
 	trf->aborting = false;
 	trf->state = TRF7970A_ST_OFF;
 
-	pm_runtime_mark_last_busy(trf->dev);
-	pm_runtime_put_autosuspend(trf->dev);
+	pm_runtime_last_busy_and_autosuspend(trf->dev);
 }
 
 static void trf7970a_switch_rf_on(struct trf7970a *trf)
-- 
1.7.0.4

[PATCH 19/27] NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/nfc/trf7970a.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/trf7970a.c b/drivers/nfc/trf7970a.c
index 3b78b03..d22ca2f 100644
--- a/drivers/nfc/trf7970a.c
+++ b/drivers/nfc/trf7970a.c
@@ -801,8 +801,7 @@ static void trf7970a_switch_rf_off(struct trf7970a *trf)
 	trf->aborting = false;
 	trf->state = TRF7970A_ST_OFF;
 
-	pm_runtime_mark_last_busy(trf->dev);
-	pm_runtime_put_autosuspend(trf->dev);
+	pm_runtime_last_busy_and_autosuspend(trf->dev);
 }
 
 static void trf7970a_switch_rf_on(struct trf7970a *trf)
-- 
1.7.0.4

[PATCH 20/27] pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/power/pm2301_charger.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c
index 62c15af..673b203 100644
--- a/drivers/power/pm2301_charger.c
+++ b/drivers/power/pm2301_charger.c
@@ -499,8 +499,7 @@ static irqreturn_t  pm2xxx_irq_int(int irq, void *data)
 		}
 	} while (gpio_get_value(pm2->pdata->gpio_irq_number) == 0);
 
-	pm_runtime_mark_last_busy(pm2->dev);
-	pm_runtime_put_autosuspend(pm2->dev);
+	pm_runtime_last_busy_and_autosuspend(pm2->dev);
 
 	return IRQ_HANDLED;
 }
-- 
1.7.0.4

[PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/spi/spi-omap2-mcspi.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 68441fa..fa2aae8 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1020,8 +1020,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 		return ret;
 
 	ret = omap2_mcspi_setup_transfer(spi, NULL);
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
+	pm_runtime_last_busy_and_autosuspend(mcspi->dev);
 
 	return ret;
 }
@@ -1282,8 +1281,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 	ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
 
 	omap2_mcspi_set_master_mode(master);
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
+	pm_runtime_last_busy_and_autosuspend(mcspi->dev);
 	return 0;
 }
 
@@ -1504,8 +1502,7 @@ static int omap2_mcspi_resume(struct device *dev)
 			writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
 		}
 	}
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
+	pm_runtime_last_busy_and_autosuspend(mcspi->dev);
 	return 0;
 }
 #else
-- 
1.7.0.4

[PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/spi/spi-omap2-mcspi.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 68441fa..fa2aae8 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -1020,8 +1020,7 @@ static int omap2_mcspi_setup(struct spi_device *spi)
 		return ret;
 
 	ret = omap2_mcspi_setup_transfer(spi, NULL);
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
+	pm_runtime_last_busy_and_autosuspend(mcspi->dev);
 
 	return ret;
 }
@@ -1282,8 +1281,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
 	ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
 
 	omap2_mcspi_set_master_mode(master);
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
+	pm_runtime_last_busy_and_autosuspend(mcspi->dev);
 	return 0;
 }
 
@@ -1504,8 +1502,7 @@ static int omap2_mcspi_resume(struct device *dev)
 			writel_relaxed(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
 		}
 	}
-	pm_runtime_mark_last_busy(mcspi->dev);
-	pm_runtime_put_autosuspend(mcspi->dev);
+	pm_runtime_last_busy_and_autosuspend(mcspi->dev);
 	return 0;
 }
 #else
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 302 bytes --]

On Wed, Sep 24, 2014 at 09:45:11PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

You haven't CCed me on anything earlier in the series so I've no idea
what's going on here but it looks like there is probably some
dependency?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 302 bytes --]

On Wed, Sep 24, 2014 at 09:45:11PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

You haven't CCed me on anything earlier in the series so I've no idea
what's going on here but it looks like there is probably some
dependency?

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 665 bytes --]

On Wed, Sep 24, 2014 at 05:58:55PM +0100, Mark Brown wrote:
> On Wed, Sep 24, 2014 at 09:45:11PM +0530, Vinod Koul wrote:
> > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > coding the same code
> 
> You haven't CCed me on anything earlier in the series so I've no idea
> what's going on here but it looks like there is probably some
> dependency?
And thats very surprsing :(

I used the Wolfram's cocci_cc script to auto cc and add everyone to cover
letter . Looks like it missed some. Sorry about that I should have been more
careful

FWIW here is cover letter https://lkml.org/lkml/2014/9/24/862

Thanks
-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 665 bytes --]

On Wed, Sep 24, 2014 at 05:58:55PM +0100, Mark Brown wrote:
> On Wed, Sep 24, 2014 at 09:45:11PM +0530, Vinod Koul wrote:
> > Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> > coding the same code
> 
> You haven't CCed me on anything earlier in the series so I've no idea
> what's going on here but it looks like there is probably some
> dependency?
And thats very surprsing :(

I used the Wolfram's cocci_cc script to auto cc and add everyone to cover
letter . Looks like it missed some. Sorry about that I should have been more
careful

FWIW here is cover letter https://lkml.org/lkml/2014/9/24/862

Thanks
-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 21/27] spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 280 bytes --]

On Wed, Sep 24, 2014 at 09:45:11PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

Acked-by: Mark Brown <broonie@kernel.org>

though I have to say that the function name is rather spectacularly long
here.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 22/27] spi: orion: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/spi/spi-orion.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c
index c4675fa..3f14578 100644
--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -408,8 +408,7 @@ static int orion_spi_probe(struct platform_device *pdev)
 	if (status < 0)
 		goto out_rel_pm;
 
-	pm_runtime_mark_last_busy(&pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
+	pm_runtime_last_busy_and_autosuspend(&pdev->dev);
 
 	master->dev.of_node = pdev->dev.of_node;
 	status = spi_register_master(master);
-- 
1.7.0.4

Re: [PATCH 22/27] spi: orion: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 200 bytes --]

On Wed, Sep 24, 2014 at 09:45:12PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 23/27] spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/spi/spi-ti-qspi.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 6c211d1..3a57173 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -182,10 +182,9 @@ static int ti_qspi_setup(struct spi_device *spi)
 	ti_qspi_write(qspi, clk_mask, QSPI_SPI_CLOCK_CNTRL_REG);
 	ctx_reg->clkctrl = clk_mask;
 
-	pm_runtime_mark_last_busy(qspi->dev);
-	ret = pm_runtime_put_autosuspend(qspi->dev);
+	pm_runtime_last_busy_and_autosuspend(qspi->dev);
 	if (ret < 0) {
-		dev_err(qspi->dev, "pm_runtime_put_autosuspend() failed\n");
+		dev_err(qspi->dev, "pm_runtime_last_busy_and_autosuspend() failed\n");
 		return ret;
 	}
 
-- 
1.7.0.4

Re: [PATCH 23/27] spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 200 bytes --]

On Wed, Sep 24, 2014 at 09:45:13PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 24/27] spi: core: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/spi/spi.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index e0531ba..6ec5330 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -893,10 +893,8 @@ static void spi_pump_messages(struct kthread_work *work)
 		    master->unprepare_transfer_hardware(master))
 			dev_err(&master->dev,
 				"failed to unprepare transfer hardware\n");
-		if (master->auto_runtime_pm) {
-			pm_runtime_mark_last_busy(master->dev.parent);
-			pm_runtime_put_autosuspend(master->dev.parent);
-		}
+		if (master->auto_runtime_pm)
+			pm_runtime_last_busy_and_autosuspend(master->dev.parent);
 		trace_spi_master_idle(master);
 		return;
 	}
-- 
1.7.0.4

Re: [PATCH 24/27] spi: core: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 200 bytes --]

On Wed, Sep 24, 2014 at 09:45:14PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

Acked-by: Mark Brown <broonie@kernel.org>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [PATCH 24/27] spi: core: use pm_runtime_last_busy_and_autosuspend helper

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 229 bytes --]

On Wed, Sep 24, 2014 at 09:45:14PM +0530, Vinod Koul wrote:
> Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
> coding the same code

Acked-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

[PATCH 25/27] tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/tty/serial/omap-serial.c |   60 ++++++++++++-------------------------
 1 files changed, 20 insertions(+), 40 deletions(-)

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d017cec..83a50ca 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -290,8 +290,7 @@ static void serial_omap_enable_ms(struct uart_port *port)
 	pm_runtime_get_sync(up->dev);
 	up->ier |= UART_IER_MSI;
 	serial_out(up, UART_IER, up->ier);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_tx(struct uart_port *port)
@@ -352,8 +351,7 @@ static void serial_omap_stop_tx(struct uart_port *port)
 		serial_out(up, UART_IER, up->ier);
 	}
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void serial_omap_stop_rx(struct uart_port *port)
@@ -364,8 +362,7 @@ static void serial_omap_stop_rx(struct uart_port *port)
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	up->port.read_status_mask &= ~UART_LSR_DR;
 	serial_out(up, UART_IER, up->ier);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
@@ -434,8 +431,7 @@ static void serial_omap_start_tx(struct uart_port *port)
 		serial_omap_stop_rx(port);
 
 	serial_omap_enable_ier_thri(up);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void serial_omap_throttle(struct uart_port *port)
@@ -448,8 +444,7 @@ static void serial_omap_throttle(struct uart_port *port)
 	up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
 	serial_out(up, UART_IER, up->ier);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void serial_omap_unthrottle(struct uart_port *port)
@@ -462,8 +457,7 @@ static void serial_omap_unthrottle(struct uart_port *port)
 	up->ier |= UART_IER_RLSI | UART_IER_RDI;
 	serial_out(up, UART_IER, up->ier);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static unsigned int check_modem_status(struct uart_omap_port *up)
@@ -616,8 +610,7 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
 
 	tty_flip_buffer_push(&up->port.state->port);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	up->port_activity = jiffies;
 
 	return ret;
@@ -634,8 +627,7 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port)
 	spin_lock_irqsave(&up->port.lock, flags);
 	ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	return ret;
 }
 
@@ -647,8 +639,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port *port)
 
 	pm_runtime_get_sync(up->dev);
 	status = check_modem_status(up);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 
 	dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line);
 
@@ -686,8 +677,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		     UART_MCR_DTR | UART_MCR_RTS);
 	up->mcr = old_mcr | mcr;
 	serial_out(up, UART_MCR, up->mcr);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -704,8 +694,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state)
 		up->lcr &= ~UART_LCR_SBC;
 	serial_out(up, UART_LCR, up->lcr);
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static int serial_omap_startup(struct uart_port *port)
@@ -781,8 +770,7 @@ static int serial_omap_startup(struct uart_port *port)
 
 	serial_out(up, UART_OMAP_WER, up->wer);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	up->port_activity = jiffies;
 	return 0;
 }
@@ -818,8 +806,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 	if (serial_in(up, UART_LSR) & UART_LSR_DR)
 		(void) serial_in(up, UART_RX);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	free_irq(up->port.irq, up);
 	if (up->wakeirq)
 		free_irq(up->wakeirq, up);
@@ -1088,8 +1075,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_omap_set_mctrl(&up->port, up->port.mctrl);
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line);
 }
 
@@ -1120,8 +1106,7 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 			pm_runtime_allow(up->dev);
 	}
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static void serial_omap_release_port(struct uart_port *port)
@@ -1204,8 +1189,7 @@ static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
 	pm_runtime_get_sync(up->dev);
 	wait_for_xmitr(up);
 	serial_out(up, UART_TX, ch);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static int serial_omap_poll_get_char(struct uart_port *port)
@@ -1223,8 +1207,7 @@ static int serial_omap_poll_get_char(struct uart_port *port)
 	status = serial_in(up, UART_RX);
 
 out:
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 
 	return status;
 }
@@ -1288,8 +1271,7 @@ serial_omap_console_write(struct console *co, const char *s,
 	if (up->msr_saved_flags)
 		check_modem_status(up);
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	if (locked)
 		spin_unlock(&up->port.lock);
 	local_irq_restore(flags);
@@ -1387,8 +1369,7 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 	}
 
 	spin_unlock_irqrestore(&up->port.lock, flags);
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 }
 
 static int
@@ -1724,8 +1705,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	if (ret != 0)
 		goto err_add_port;
 
-	pm_runtime_mark_last_busy(up->dev);
-	pm_runtime_put_autosuspend(up->dev);
+	pm_runtime_last_busy_and_autosuspend(up->dev);
 	return 0;
 
 err_add_port:
-- 
1.7.0.4

[PATCH 26/27] usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/usb/musb/omap2430.c |    6 ++----
 1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index d369bf1..17c6c49 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -293,8 +293,7 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 		musb->xceiv->last_event = USB_EVENT_NONE;
 		if (musb->gadget_driver) {
 			omap2430_musb_set_vbus(musb, 0);
-			pm_runtime_mark_last_busy(dev);
-			pm_runtime_put_autosuspend(dev);
+			pm_runtime_last_busy_and_autosuspend(dev);
 		}
 
 		if (data->interface_type == MUSB_INTERFACE_UTMI)
@@ -321,8 +320,7 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
 
 	pm_runtime_get_sync(dev);
 	omap_musb_set_mailbox(glue);
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 }
 
 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
-- 
1.7.0.4

[PATCH 27/27] video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/video/fbdev/auo_k190x.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
index 8d2499d..e12f513 100644
--- a/drivers/video/fbdev/auo_k190x.c
+++ b/drivers/video/fbdev/auo_k190x.c
@@ -354,8 +354,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 		par->update_partial(par, y1, min((u16) (y1 + h), yres));
 
 out:
-	pm_runtime_mark_last_busy(info->device);
-	pm_runtime_put_autosuspend(info->device);
+	pm_runtime_last_busy_and_autosuspend(info->device);
 }
 
 /*
@@ -591,8 +590,7 @@ static int auok190x_read_temperature(struct auok190xfb_par *par)
 
 	mutex_unlock(&(par->io_lock));
 
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 
 	/* sanitize and split of half-degrees for now */
 	temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
@@ -630,8 +628,7 @@ static void auok190x_identify(struct auok190xfb_par *par)
 		par->panel_size_int, par->panel_size_float, par->panel_model,
 		par->epd_type, par->tcon_version, par->lut_version);
 
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 }
 
 /*
-- 
1.7.0.4

[PATCH 27/27] video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

[Vinod Koul]

Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---
 drivers/video/fbdev/auo_k190x.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/video/fbdev/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
index 8d2499d..e12f513 100644
--- a/drivers/video/fbdev/auo_k190x.c
+++ b/drivers/video/fbdev/auo_k190x.c
@@ -354,8 +354,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 		par->update_partial(par, y1, min((u16) (y1 + h), yres));
 
 out:
-	pm_runtime_mark_last_busy(info->device);
-	pm_runtime_put_autosuspend(info->device);
+	pm_runtime_last_busy_and_autosuspend(info->device);
 }
 
 /*
@@ -591,8 +590,7 @@ static int auok190x_read_temperature(struct auok190xfb_par *par)
 
 	mutex_unlock(&(par->io_lock));
 
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 
 	/* sanitize and split of half-degrees for now */
 	temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
@@ -630,8 +628,7 @@ static void auok190x_identify(struct auok190xfb_par *par)
 		par->panel_size_int, par->panel_size_float, par->panel_model,
 		par->epd_type, par->tcon_version, par->lut_version);
 
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 }
 
 /*
-- 
1.7.0.4

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> sequentially. Then we do a tree wide update of current patterns which are
> present. As evident from log below this pattern is frequent in the
> kernel.
> 
> This series can be found at
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> topic/pm_runtime_last_busy_and_autosuspend
> 
> Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> Barring one patch (explictyly mentioned in its changelog) rest are simple
> replacements.
> 
> If all are okay, this should be merged thru PM tree as it depends on macro
> addition.
> 
> Subhransu S. Prusty (1):
>   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> 
> Vinod Koul (26):
>   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
>   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
>   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
>   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
>   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   mei: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
>   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
>   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
>   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
>   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: core: use pm_runtime_last_busy_and_autosuspend helper
>   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
>   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
>   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> 
>  Documentation/power/runtime_pm.txt          |    4 ++
>  drivers/dma/ste_dma40.c                     |   30 ++++---------
>  drivers/extcon/extcon-arizona.c             |    6 +--
>  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
>  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
>  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
>  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
>  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
>  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
>  drivers/i2c/busses/i2c-omap.c               |    6 +--
>  drivers/i2c/busses/i2c-qup.c                |    3 +-
>  drivers/mfd/ab8500-gpadc.c                  |    6 +--
>  drivers/mfd/arizona-irq.c                   |    3 +-
>  drivers/misc/mei/client.c                   |   12 ++----
>  drivers/mmc/core/core.c                     |    3 +-
>  drivers/mmc/host/mmci.c                     |   12 ++----
>  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
>  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
>  drivers/mmc/host/sdhci.c                    |    3 +-
>  drivers/nfc/trf7970a.c                      |    3 +-
>  drivers/power/pm2301_charger.c              |    3 +-
>  drivers/spi/spi-omap2-mcspi.c               |    9 +---
>  drivers/spi/spi-orion.c                     |    3 +-
>  drivers/spi/spi-ti-qspi.c                   |    5 +-
>  drivers/spi/spi.c                           |    6 +--
>  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
>  drivers/usb/musb/omap2430.c                 |    6 +--
>  drivers/video/fbdev/auo_k190x.c             |    9 +---
>  include/linux/pm_runtime.h                  |    6 +++
>  31 files changed, 97 insertions(+), 177 deletions(-)

OK, I guess this is as good as it gets.

What tree would you like it go through?


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> sequentially. Then we do a tree wide update of current patterns which are
> present. As evident from log below this pattern is frequent in the
> kernel.
> 
> This series can be found at
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> topic/pm_runtime_last_busy_and_autosuspend
> 
> Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> Barring one patch (explictyly mentioned in its changelog) rest are simple
> replacements.
> 
> If all are okay, this should be merged thru PM tree as it depends on macro
> addition.
> 
> Subhransu S. Prusty (1):
>   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> 
> Vinod Koul (26):
>   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
>   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
>   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
>   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
>   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   mei: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
>   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
>   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
>   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
>   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: core: use pm_runtime_last_busy_and_autosuspend helper
>   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
>   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
>   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> 
>  Documentation/power/runtime_pm.txt          |    4 ++
>  drivers/dma/ste_dma40.c                     |   30 ++++---------
>  drivers/extcon/extcon-arizona.c             |    6 +--
>  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
>  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
>  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
>  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
>  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
>  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
>  drivers/i2c/busses/i2c-omap.c               |    6 +--
>  drivers/i2c/busses/i2c-qup.c                |    3 +-
>  drivers/mfd/ab8500-gpadc.c                  |    6 +--
>  drivers/mfd/arizona-irq.c                   |    3 +-
>  drivers/misc/mei/client.c                   |   12 ++----
>  drivers/mmc/core/core.c                     |    3 +-
>  drivers/mmc/host/mmci.c                     |   12 ++----
>  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
>  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
>  drivers/mmc/host/sdhci.c                    |    3 +-
>  drivers/nfc/trf7970a.c                      |    3 +-
>  drivers/power/pm2301_charger.c              |    3 +-
>  drivers/spi/spi-omap2-mcspi.c               |    9 +---
>  drivers/spi/spi-orion.c                     |    3 +-
>  drivers/spi/spi-ti-qspi.c                   |    5 +-
>  drivers/spi/spi.c                           |    6 +--
>  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
>  drivers/usb/musb/omap2430.c                 |    6 +--
>  drivers/video/fbdev/auo_k190x.c             |    9 +---
>  include/linux/pm_runtime.h                  |    6 +++
>  31 files changed, 97 insertions(+), 177 deletions(-)

OK, I guess this is as good as it gets.

What tree would you like it go through?


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> sequentially. Then we do a tree wide update of current patterns which are
> present. As evident from log below this pattern is frequent in the
> kernel.
> 
> This series can be found at
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> topic/pm_runtime_last_busy_and_autosuspend
> 
> Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> Barring one patch (explictyly mentioned in its changelog) rest are simple
> replacements.
> 
> If all are okay, this should be merged thru PM tree as it depends on macro
> addition.
> 
> Subhransu S. Prusty (1):
>   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> 
> Vinod Koul (26):
>   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
>   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
>   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
>   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
>   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   mei: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
>   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
>   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
>   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
>   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: core: use pm_runtime_last_busy_and_autosuspend helper
>   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
>   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
>   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> 
>  Documentation/power/runtime_pm.txt          |    4 ++
>  drivers/dma/ste_dma40.c                     |   30 ++++---------
>  drivers/extcon/extcon-arizona.c             |    6 +--
>  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
>  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
>  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
>  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
>  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
>  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
>  drivers/i2c/busses/i2c-omap.c               |    6 +--
>  drivers/i2c/busses/i2c-qup.c                |    3 +-
>  drivers/mfd/ab8500-gpadc.c                  |    6 +--
>  drivers/mfd/arizona-irq.c                   |    3 +-
>  drivers/misc/mei/client.c                   |   12 ++----
>  drivers/mmc/core/core.c                     |    3 +-
>  drivers/mmc/host/mmci.c                     |   12 ++----
>  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
>  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
>  drivers/mmc/host/sdhci.c                    |    3 +-
>  drivers/nfc/trf7970a.c                      |    3 +-
>  drivers/power/pm2301_charger.c              |    3 +-
>  drivers/spi/spi-omap2-mcspi.c               |    9 +---
>  drivers/spi/spi-orion.c                     |    3 +-
>  drivers/spi/spi-ti-qspi.c                   |    5 +-
>  drivers/spi/spi.c                           |    6 +--
>  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
>  drivers/usb/musb/omap2430.c                 |    6 +--
>  drivers/video/fbdev/auo_k190x.c             |    9 +---
>  include/linux/pm_runtime.h                  |    6 +++
>  31 files changed, 97 insertions(+), 177 deletions(-)

OK, I guess this is as good as it gets.

What tree would you like it go through?


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> sequentially. Then we do a tree wide update of current patterns which are
> present. As evident from log below this pattern is frequent in the
> kernel.
> 
> This series can be found at
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> topic/pm_runtime_last_busy_and_autosuspend
> 
> Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> Barring one patch (explictyly mentioned in its changelog) rest are simple
> replacements.
> 
> If all are okay, this should be merged thru PM tree as it depends on macro
> addition.
> 
> Subhransu S. Prusty (1):
>   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> 
> Vinod Koul (26):
>   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
>   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
>   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
>   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
>   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   mei: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
>   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
>   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
>   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
>   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: core: use pm_runtime_last_busy_and_autosuspend helper
>   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
>   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
>   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> 
>  Documentation/power/runtime_pm.txt          |    4 ++
>  drivers/dma/ste_dma40.c                     |   30 ++++---------
>  drivers/extcon/extcon-arizona.c             |    6 +--
>  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
>  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
>  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
>  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
>  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
>  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
>  drivers/i2c/busses/i2c-omap.c               |    6 +--
>  drivers/i2c/busses/i2c-qup.c                |    3 +-
>  drivers/mfd/ab8500-gpadc.c                  |    6 +--
>  drivers/mfd/arizona-irq.c                   |    3 +-
>  drivers/misc/mei/client.c                   |   12 ++----
>  drivers/mmc/core/core.c                     |    3 +-
>  drivers/mmc/host/mmci.c                     |   12 ++----
>  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
>  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
>  drivers/mmc/host/sdhci.c                    |    3 +-
>  drivers/nfc/trf7970a.c                      |    3 +-
>  drivers/power/pm2301_charger.c              |    3 +-
>  drivers/spi/spi-omap2-mcspi.c               |    9 +---
>  drivers/spi/spi-orion.c                     |    3 +-
>  drivers/spi/spi-ti-qspi.c                   |    5 +-
>  drivers/spi/spi.c                           |    6 +--
>  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
>  drivers/usb/musb/omap2430.c                 |    6 +--
>  drivers/video/fbdev/auo_k190x.c             |    9 +---
>  include/linux/pm_runtime.h                  |    6 +++
>  31 files changed, 97 insertions(+), 177 deletions(-)

OK, I guess this is as good as it gets.

What tree would you like it go through?


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> sequentially. Then we do a tree wide update of current patterns which are
> present. As evident from log below this pattern is frequent in the
> kernel.
> 
> This series can be found at
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> topic/pm_runtime_last_busy_and_autosuspend
> 
> Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> Barring one patch (explictyly mentioned in its changelog) rest are simple
> replacements.
> 
> If all are okay, this should be merged thru PM tree as it depends on macro
> addition.
> 
> Subhransu S. Prusty (1):
>   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> 
> Vinod Koul (26):
>   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
>   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
>   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
>   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
>   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
>   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
>   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
>   mei: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
>   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
>   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
>   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
>   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
>   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
>   spi: core: use pm_runtime_last_busy_and_autosuspend helper
>   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
>   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
>   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> 
>  Documentation/power/runtime_pm.txt          |    4 ++
>  drivers/dma/ste_dma40.c                     |   30 ++++---------
>  drivers/extcon/extcon-arizona.c             |    6 +--
>  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
>  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
>  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
>  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
>  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
>  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
>  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
>  drivers/i2c/busses/i2c-omap.c               |    6 +--
>  drivers/i2c/busses/i2c-qup.c                |    3 +-
>  drivers/mfd/ab8500-gpadc.c                  |    6 +--
>  drivers/mfd/arizona-irq.c                   |    3 +-
>  drivers/misc/mei/client.c                   |   12 ++----
>  drivers/mmc/core/core.c                     |    3 +-
>  drivers/mmc/host/mmci.c                     |   12 ++----
>  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
>  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
>  drivers/mmc/host/sdhci.c                    |    3 +-
>  drivers/nfc/trf7970a.c                      |    3 +-
>  drivers/power/pm2301_charger.c              |    3 +-
>  drivers/spi/spi-omap2-mcspi.c               |    9 +---
>  drivers/spi/spi-orion.c                     |    3 +-
>  drivers/spi/spi-ti-qspi.c                   |    5 +-
>  drivers/spi/spi.c                           |    6 +--
>  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
>  drivers/usb/musb/omap2430.c                 |    6 +--
>  drivers/video/fbdev/auo_k190x.c             |    9 +---
>  include/linux/pm_runtime.h                  |    6 +++
>  31 files changed, 97 insertions(+), 177 deletions(-)

OK, I guess this is as good as it gets.

What tree would you like it go through?


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 5110 bytes --]

On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> > This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> > which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> > sequentially. Then we do a tree wide update of current patterns which are
> > present. As evident from log below this pattern is frequent in the
> > kernel.
> > 
> > This series can be found at
> > git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> > topic/pm_runtime_last_busy_and_autosuspend
> > 
> > Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> > Barring one patch (explictyly mentioned in its changelog) rest are simple
> > replacements.
> > 
> > If all are okay, this should be merged thru PM tree as it depends on macro
> > addition.
> > 
> > Subhransu S. Prusty (1):
> >   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> > 
> > Vinod Koul (26):
> >   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
> >   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
> >   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
> >   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
> >   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
> >   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
> >   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
> >   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
> >   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
> >   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
> >   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
> >   mei: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
> >   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
> >   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: core: use pm_runtime_last_busy_and_autosuspend helper
> >   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
> >   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
> >   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> > 
> >  Documentation/power/runtime_pm.txt          |    4 ++
> >  drivers/dma/ste_dma40.c                     |   30 ++++---------
> >  drivers/extcon/extcon-arizona.c             |    6 +--
> >  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
> >  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
> >  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
> >  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
> >  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
> >  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
> >  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
> >  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
> >  drivers/i2c/busses/i2c-omap.c               |    6 +--
> >  drivers/i2c/busses/i2c-qup.c                |    3 +-
> >  drivers/mfd/ab8500-gpadc.c                  |    6 +--
> >  drivers/mfd/arizona-irq.c                   |    3 +-
> >  drivers/misc/mei/client.c                   |   12 ++----
> >  drivers/mmc/core/core.c                     |    3 +-
> >  drivers/mmc/host/mmci.c                     |   12 ++----
> >  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
> >  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
> >  drivers/mmc/host/sdhci.c                    |    3 +-
> >  drivers/nfc/trf7970a.c                      |    3 +-
> >  drivers/power/pm2301_charger.c              |    3 +-
> >  drivers/spi/spi-omap2-mcspi.c               |    9 +---
> >  drivers/spi/spi-orion.c                     |    3 +-
> >  drivers/spi/spi-ti-qspi.c                   |    5 +-
> >  drivers/spi/spi.c                           |    6 +--
> >  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
> >  drivers/usb/musb/omap2430.c                 |    6 +--
> >  drivers/video/fbdev/auo_k190x.c             |    9 +---
> >  include/linux/pm_runtime.h                  |    6 +++
> >  31 files changed, 97 insertions(+), 177 deletions(-)
> 
> OK, I guess this is as good as it gets.
> 
> What tree would you like it go through?

Do we really need this new helper ? I mean, the very moment when we
decide to implement ->runtime_idle() we will need to get rid of this
change. I wonder if it's really valid...

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 5110 bytes --]

On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> > This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> > which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> > sequentially. Then we do a tree wide update of current patterns which are
> > present. As evident from log below this pattern is frequent in the
> > kernel.
> > 
> > This series can be found at
> > git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> > topic/pm_runtime_last_busy_and_autosuspend
> > 
> > Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> > Barring one patch (explictyly mentioned in its changelog) rest are simple
> > replacements.
> > 
> > If all are okay, this should be merged thru PM tree as it depends on macro
> > addition.
> > 
> > Subhransu S. Prusty (1):
> >   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> > 
> > Vinod Koul (26):
> >   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
> >   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
> >   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
> >   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
> >   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
> >   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
> >   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
> >   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
> >   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
> >   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
> >   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
> >   mei: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
> >   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
> >   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
> >   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
> >   spi: core: use pm_runtime_last_busy_and_autosuspend helper
> >   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
> >   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
> >   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> > 
> >  Documentation/power/runtime_pm.txt          |    4 ++
> >  drivers/dma/ste_dma40.c                     |   30 ++++---------
> >  drivers/extcon/extcon-arizona.c             |    6 +--
> >  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
> >  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
> >  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
> >  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
> >  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
> >  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
> >  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
> >  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
> >  drivers/i2c/busses/i2c-omap.c               |    6 +--
> >  drivers/i2c/busses/i2c-qup.c                |    3 +-
> >  drivers/mfd/ab8500-gpadc.c                  |    6 +--
> >  drivers/mfd/arizona-irq.c                   |    3 +-
> >  drivers/misc/mei/client.c                   |   12 ++----
> >  drivers/mmc/core/core.c                     |    3 +-
> >  drivers/mmc/host/mmci.c                     |   12 ++----
> >  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
> >  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
> >  drivers/mmc/host/sdhci.c                    |    3 +-
> >  drivers/nfc/trf7970a.c                      |    3 +-
> >  drivers/power/pm2301_charger.c              |    3 +-
> >  drivers/spi/spi-omap2-mcspi.c               |    9 +---
> >  drivers/spi/spi-orion.c                     |    3 +-
> >  drivers/spi/spi-ti-qspi.c                   |    5 +-
> >  drivers/spi/spi.c                           |    6 +--
> >  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
> >  drivers/usb/musb/omap2430.c                 |    6 +--
> >  drivers/video/fbdev/auo_k190x.c             |    9 +---
> >  include/linux/pm_runtime.h                  |    6 +++
> >  31 files changed, 97 insertions(+), 177 deletions(-)
> 
> OK, I guess this is as good as it gets.
> 
> What tree would you like it go through?

Do we really need this new helper ? I mean, the very moment when we
decide to implement ->runtime_idle() we will need to get rid of this
change. I wonder if it's really valid...

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

[-- Attachment #1.1: Type: text/plain, Size: 5602 bytes --]

On Wednesday, September 24, 2014 03:15:58 PM Felipe Balbi wrote:
> On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> > On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> > > This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> > > which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> > > sequentially. Then we do a tree wide update of current patterns which are
> > > present. As evident from log below this pattern is frequent in the
> > > kernel.
> > > 
> > > This series can be found at
> > > git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> > > topic/pm_runtime_last_busy_and_autosuspend
> > > 
> > > Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> > > Barring one patch (explictyly mentioned in its changelog) rest are simple
> > > replacements.
> > > 
> > > If all are okay, this should be merged thru PM tree as it depends on macro
> > > addition.
> > > 
> > > Subhransu S. Prusty (1):
> > >   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> > > 
> > > Vinod Koul (26):
> > >   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
> > >   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > >   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
> > >   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
> > >   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
> > >   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
> > >   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
> > >   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
> > >   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
> > >   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
> > >   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > >   mei: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
> > >   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
> > >   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: core: use pm_runtime_last_busy_and_autosuspend helper
> > >   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
> > >   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
> > >   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> > > 
> > >  Documentation/power/runtime_pm.txt          |    4 ++
> > >  drivers/dma/ste_dma40.c                     |   30 ++++---------
> > >  drivers/extcon/extcon-arizona.c             |    6 +--
> > >  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
> > >  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
> > >  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
> > >  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
> > >  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
> > >  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
> > >  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
> > >  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
> > >  drivers/i2c/busses/i2c-omap.c               |    6 +--
> > >  drivers/i2c/busses/i2c-qup.c                |    3 +-
> > >  drivers/mfd/ab8500-gpadc.c                  |    6 +--
> > >  drivers/mfd/arizona-irq.c                   |    3 +-
> > >  drivers/misc/mei/client.c                   |   12 ++----
> > >  drivers/mmc/core/core.c                     |    3 +-
> > >  drivers/mmc/host/mmci.c                     |   12 ++----
> > >  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
> > >  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
> > >  drivers/mmc/host/sdhci.c                    |    3 +-
> > >  drivers/nfc/trf7970a.c                      |    3 +-
> > >  drivers/power/pm2301_charger.c              |    3 +-
> > >  drivers/spi/spi-omap2-mcspi.c               |    9 +---
> > >  drivers/spi/spi-orion.c                     |    3 +-
> > >  drivers/spi/spi-ti-qspi.c                   |    5 +-
> > >  drivers/spi/spi.c                           |    6 +--
> > >  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
> > >  drivers/usb/musb/omap2430.c                 |    6 +--
> > >  drivers/video/fbdev/auo_k190x.c             |    9 +---
> > >  include/linux/pm_runtime.h                  |    6 +++
> > >  31 files changed, 97 insertions(+), 177 deletions(-)
> > 
> > OK, I guess this is as good as it gets.
> > 
> > What tree would you like it go through?
> 
> Do we really need this new helper ? I mean, the very moment when we
> decide to implement ->runtime_idle() we will need to get rid of this
> change. I wonder if it's really valid...

I'm not sure I'm following?  This seems to simply implement what drivers
have been doing already as one function.  Why would it be invalid to reduce
code duplication?

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

[-- Attachment #1.1: Type: text/plain, Size: 5602 bytes --]

On Wednesday, September 24, 2014 03:15:58 PM Felipe Balbi wrote:
> On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> > On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> > > This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> > > which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> > > sequentially. Then we do a tree wide update of current patterns which are
> > > present. As evident from log below this pattern is frequent in the
> > > kernel.
> > > 
> > > This series can be found at
> > > git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> > > topic/pm_runtime_last_busy_and_autosuspend
> > > 
> > > Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> > > Barring one patch (explictyly mentioned in its changelog) rest are simple
> > > replacements.
> > > 
> > > If all are okay, this should be merged thru PM tree as it depends on macro
> > > addition.
> > > 
> > > Subhransu S. Prusty (1):
> > >   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> > > 
> > > Vinod Koul (26):
> > >   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
> > >   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > >   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
> > >   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
> > >   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
> > >   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
> > >   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
> > >   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
> > >   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
> > >   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
> > >   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > >   mei: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
> > >   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
> > >   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
> > >   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
> > >   spi: core: use pm_runtime_last_busy_and_autosuspend helper
> > >   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
> > >   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
> > >   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> > > 
> > >  Documentation/power/runtime_pm.txt          |    4 ++
> > >  drivers/dma/ste_dma40.c                     |   30 ++++---------
> > >  drivers/extcon/extcon-arizona.c             |    6 +--
> > >  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
> > >  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
> > >  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
> > >  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
> > >  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
> > >  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
> > >  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
> > >  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
> > >  drivers/i2c/busses/i2c-omap.c               |    6 +--
> > >  drivers/i2c/busses/i2c-qup.c                |    3 +-
> > >  drivers/mfd/ab8500-gpadc.c                  |    6 +--
> > >  drivers/mfd/arizona-irq.c                   |    3 +-
> > >  drivers/misc/mei/client.c                   |   12 ++----
> > >  drivers/mmc/core/core.c                     |    3 +-
> > >  drivers/mmc/host/mmci.c                     |   12 ++----
> > >  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
> > >  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
> > >  drivers/mmc/host/sdhci.c                    |    3 +-
> > >  drivers/nfc/trf7970a.c                      |    3 +-
> > >  drivers/power/pm2301_charger.c              |    3 +-
> > >  drivers/spi/spi-omap2-mcspi.c               |    9 +---
> > >  drivers/spi/spi-orion.c                     |    3 +-
> > >  drivers/spi/spi-ti-qspi.c                   |    5 +-
> > >  drivers/spi/spi.c                           |    6 +--
> > >  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
> > >  drivers/usb/musb/omap2430.c                 |    6 +--
> > >  drivers/video/fbdev/auo_k190x.c             |    9 +---
> > >  include/linux/pm_runtime.h                  |    6 +++
> > >  31 files changed, 97 insertions(+), 177 deletions(-)
> > 
> > OK, I guess this is as good as it gets.
> > 
> > What tree would you like it go through?
> 
> Do we really need this new helper ? I mean, the very moment when we
> decide to implement ->runtime_idle() we will need to get rid of this
> change. I wonder if it's really valid...

I'm not sure I'm following?  This seems to simply implement what drivers
have been doing already as one function.  Why would it be invalid to reduce
code duplication?

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 6265 bytes --]

On Wed, Sep 24, 2014 at 10:46:17PM +0200, Rafael J. Wysocki wrote:
> On Wednesday, September 24, 2014 03:15:58 PM Felipe Balbi wrote:
> > On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> > > On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> > > > This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> > > > which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> > > > sequentially. Then we do a tree wide update of current patterns which are
> > > > present. As evident from log below this pattern is frequent in the
> > > > kernel.
> > > > 
> > > > This series can be found at
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> > > > topic/pm_runtime_last_busy_and_autosuspend
> > > > 
> > > > Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> > > > Barring one patch (explictyly mentioned in its changelog) rest are simple
> > > > replacements.
> > > > 
> > > > If all are okay, this should be merged thru PM tree as it depends on macro
> > > > addition.
> > > > 
> > > > Subhransu S. Prusty (1):
> > > >   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> > > > 
> > > > Vinod Koul (26):
> > > >   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
> > > >   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > > >   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
> > > >   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
> > > >   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
> > > >   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
> > > >   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
> > > >   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
> > > >   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mei: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
> > > >   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
> > > >   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: core: use pm_runtime_last_busy_and_autosuspend helper
> > > >   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
> > > >   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
> > > >   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> > > > 
> > > >  Documentation/power/runtime_pm.txt          |    4 ++
> > > >  drivers/dma/ste_dma40.c                     |   30 ++++---------
> > > >  drivers/extcon/extcon-arizona.c             |    6 +--
> > > >  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
> > > >  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
> > > >  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
> > > >  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
> > > >  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
> > > >  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
> > > >  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
> > > >  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
> > > >  drivers/i2c/busses/i2c-omap.c               |    6 +--
> > > >  drivers/i2c/busses/i2c-qup.c                |    3 +-
> > > >  drivers/mfd/ab8500-gpadc.c                  |    6 +--
> > > >  drivers/mfd/arizona-irq.c                   |    3 +-
> > > >  drivers/misc/mei/client.c                   |   12 ++----
> > > >  drivers/mmc/core/core.c                     |    3 +-
> > > >  drivers/mmc/host/mmci.c                     |   12 ++----
> > > >  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
> > > >  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
> > > >  drivers/mmc/host/sdhci.c                    |    3 +-
> > > >  drivers/nfc/trf7970a.c                      |    3 +-
> > > >  drivers/power/pm2301_charger.c              |    3 +-
> > > >  drivers/spi/spi-omap2-mcspi.c               |    9 +---
> > > >  drivers/spi/spi-orion.c                     |    3 +-
> > > >  drivers/spi/spi-ti-qspi.c                   |    5 +-
> > > >  drivers/spi/spi.c                           |    6 +--
> > > >  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
> > > >  drivers/usb/musb/omap2430.c                 |    6 +--
> > > >  drivers/video/fbdev/auo_k190x.c             |    9 +---
> > > >  include/linux/pm_runtime.h                  |    6 +++
> > > >  31 files changed, 97 insertions(+), 177 deletions(-)
> > > 
> > > OK, I guess this is as good as it gets.
> > > 
> > > What tree would you like it go through?
> > 
> > Do we really need this new helper ? I mean, the very moment when we
> > decide to implement ->runtime_idle() we will need to get rid of this
> > change. I wonder if it's really valid...
> 
> I'm not sure I'm following?  This seems to simply implement what drivers
> have been doing already as one function.  Why would it be invalid to reduce
> code duplication?

For two reasons:

1) the helper has no inteligence whatsoever. It just calls the same
functions.

2) the duplication will vanish whenever someone implements
->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
and USB buses are doing today). This will just be yet another line that
needs to change.

Frankly though, no strong feelings, I just think it's a commit that
doesn't bring that any benefits other than looking like one line was
removed.

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 6265 bytes --]

On Wed, Sep 24, 2014 at 10:46:17PM +0200, Rafael J. Wysocki wrote:
> On Wednesday, September 24, 2014 03:15:58 PM Felipe Balbi wrote:
> > On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> > > On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
> > > > This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
> > > > which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
> > > > sequentially. Then we do a tree wide update of current patterns which are
> > > > present. As evident from log below this pattern is frequent in the
> > > > kernel.
> > > > 
> > > > This series can be found at
> > > > git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
> > > > topic/pm_runtime_last_busy_and_autosuspend
> > > > 
> > > > Fengguang's kbuild has tested it so it shouldn't break things for anyone.
> > > > Barring one patch (explictyly mentioned in its changelog) rest are simple
> > > > replacements.
> > > > 
> > > > If all are okay, this should be merged thru PM tree as it depends on macro
> > > > addition.
> > > > 
> > > > Subhransu S. Prusty (1):
> > > >   PM: Add helper pm_runtime_last_busy_and_autosuspend()
> > > > 
> > > > Vinod Koul (26):
> > > >   dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
> > > >   extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > > >   drm/i915: use pm_runtime_last_busy_and_autosuspend helper
> > > >   drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
> > > >   drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
> > > >   vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
> > > >   i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
> > > >   i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
> > > >   i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mei: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
> > > >   mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
> > > >   NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
> > > >   pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: omap2-mcspi: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: orion: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: ti-qspi: use pm_runtime_last_busy_and_autosuspend helper
> > > >   spi: core: use pm_runtime_last_busy_and_autosuspend helper
> > > >   tty: serial: omap: use pm_runtime_last_busy_and_autosuspend helper
> > > >   usb: musb: omap2430: use pm_runtime_last_busy_and_autosuspend helper
> > > >   video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
> > > > 
> > > >  Documentation/power/runtime_pm.txt          |    4 ++
> > > >  drivers/dma/ste_dma40.c                     |   30 ++++---------
> > > >  drivers/extcon/extcon-arizona.c             |    6 +--
> > > >  drivers/gpu/drm/i915/intel_pm.c             |    3 +-
> > > >  drivers/gpu/drm/nouveau/nouveau_connector.c |    3 +-
> > > >  drivers/gpu/drm/nouveau/nouveau_drm.c       |    9 +---
> > > >  drivers/gpu/drm/radeon/radeon_connectors.c  |   15 ++----
> > > >  drivers/gpu/drm/radeon/radeon_drv.c         |    5 +-
> > > >  drivers/gpu/drm/radeon/radeon_kms.c         |    6 +--
> > > >  drivers/gpu/vga/vga_switcheroo.c            |    7 +--
> > > >  drivers/i2c/busses/i2c-designware-core.c    |    3 +-
> > > >  drivers/i2c/busses/i2c-omap.c               |    6 +--
> > > >  drivers/i2c/busses/i2c-qup.c                |    3 +-
> > > >  drivers/mfd/ab8500-gpadc.c                  |    6 +--
> > > >  drivers/mfd/arizona-irq.c                   |    3 +-
> > > >  drivers/misc/mei/client.c                   |   12 ++----
> > > >  drivers/mmc/core/core.c                     |    3 +-
> > > >  drivers/mmc/host/mmci.c                     |   12 ++----
> > > >  drivers/mmc/host/omap_hsmmc.c               |   19 ++-------
> > > >  drivers/mmc/host/sdhci-pxav3.c              |    6 +--
> > > >  drivers/mmc/host/sdhci.c                    |    3 +-
> > > >  drivers/nfc/trf7970a.c                      |    3 +-
> > > >  drivers/power/pm2301_charger.c              |    3 +-
> > > >  drivers/spi/spi-omap2-mcspi.c               |    9 +---
> > > >  drivers/spi/spi-orion.c                     |    3 +-
> > > >  drivers/spi/spi-ti-qspi.c                   |    5 +-
> > > >  drivers/spi/spi.c                           |    6 +--
> > > >  drivers/tty/serial/omap-serial.c            |   60 +++++++++------------------
> > > >  drivers/usb/musb/omap2430.c                 |    6 +--
> > > >  drivers/video/fbdev/auo_k190x.c             |    9 +---
> > > >  include/linux/pm_runtime.h                  |    6 +++
> > > >  31 files changed, 97 insertions(+), 177 deletions(-)
> > > 
> > > OK, I guess this is as good as it gets.
> > > 
> > > What tree would you like it go through?
> > 
> > Do we really need this new helper ? I mean, the very moment when we
> > decide to implement ->runtime_idle() we will need to get rid of this
> > change. I wonder if it's really valid...
> 
> I'm not sure I'm following?  This seems to simply implement what drivers
> have been doing already as one function.  Why would it be invalid to reduce
> code duplication?

For two reasons:

1) the helper has no inteligence whatsoever. It just calls the same
functions.

2) the duplication will vanish whenever someone implements
->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
and USB buses are doing today). This will just be yet another line that
needs to change.

Frankly though, no strong feelings, I just think it's a commit that
doesn't bring that any benefits other than looking like one line was
removed.

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

[-- Attachment #1.1: Type: text/plain, Size: 1306 bytes --]

On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > OK, I guess this is as good as it gets.
> > > > 
> > > > What tree would you like it go through?
> > > 
> > > Do we really need this new helper ? I mean, the very moment when we
> > > decide to implement ->runtime_idle() we will need to get rid of this
> > > change. I wonder if it's really valid...
> > 
> > I'm not sure I'm following?  This seems to simply implement what drivers
> > have been doing already as one function.  Why would it be invalid to reduce
> > code duplication?
> 
> For two reasons:
> 
> 1) the helper has no inteligence whatsoever. It just calls the same
> functions.
> 
> 2) the duplication will vanish whenever someone implements
> ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> and USB buses are doing today). This will just be yet another line that
> needs to change.
> 
> Frankly though, no strong feelings, I just think it's a commit that
> doesn't bring that any benefits other than looking like one line was
> removed.
and yes that is what it tries to do nothing more nothing less. If in future
there are no users (today we have quite a few), then we can remove the dead
macro, no harm. But that is not the situation today.

Thanks
-- 
~Vinod


[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

[-- Attachment #1.1: Type: text/plain, Size: 1306 bytes --]

On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > OK, I guess this is as good as it gets.
> > > > 
> > > > What tree would you like it go through?
> > > 
> > > Do we really need this new helper ? I mean, the very moment when we
> > > decide to implement ->runtime_idle() we will need to get rid of this
> > > change. I wonder if it's really valid...
> > 
> > I'm not sure I'm following?  This seems to simply implement what drivers
> > have been doing already as one function.  Why would it be invalid to reduce
> > code duplication?
> 
> For two reasons:
> 
> 1) the helper has no inteligence whatsoever. It just calls the same
> functions.
> 
> 2) the duplication will vanish whenever someone implements
> ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> and USB buses are doing today). This will just be yet another line that
> needs to change.
> 
> Frankly though, no strong feelings, I just think it's a commit that
> doesn't bring that any benefits other than looking like one line was
> removed.
and yes that is what it tries to do nothing more nothing less. If in future
there are no users (today we have quite a few), then we can remove the dead
macro, no harm. But that is not the situation today.

Thanks
-- 
~Vinod


[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 1737 bytes --]

On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > OK, I guess this is as good as it gets.
> > > > > 
> > > > > What tree would you like it go through?
> > > > 
> > > > Do we really need this new helper ? I mean, the very moment when we
> > > > decide to implement ->runtime_idle() we will need to get rid of this
> > > > change. I wonder if it's really valid...
> > > 
> > > I'm not sure I'm following?  This seems to simply implement what drivers
> > > have been doing already as one function.  Why would it be invalid to reduce
> > > code duplication?
> > 
> > For two reasons:
> > 
> > 1) the helper has no inteligence whatsoever. It just calls the same
> > functions.
> > 
> > 2) the duplication will vanish whenever someone implements
> > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > and USB buses are doing today). This will just be yet another line that
> > needs to change.
> > 
> > Frankly though, no strong feelings, I just think it's a commit that
> > doesn't bring that any benefits other than looking like one line was
> > removed.
> and yes that is what it tries to do nothing more nothing less. If in future
> there are no users (today we have quite a few), then we can remove the dead
> macro, no harm. But that is not the situation today.

as I said, a commit that's bound to be useless. It's not like you're
saving 10 lines of code, it's only one. Replacing two simple lines with
a function which takes <joke> almost as many characters to type </joke>.

IMO, this is pretty useless and I'd rather not see them in the drivers I
maintain, sorry.

cheers

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Felipe Balbi]

[-- Attachment #1.1: Type: text/plain, Size: 1737 bytes --]

On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > OK, I guess this is as good as it gets.
> > > > > 
> > > > > What tree would you like it go through?
> > > > 
> > > > Do we really need this new helper ? I mean, the very moment when we
> > > > decide to implement ->runtime_idle() we will need to get rid of this
> > > > change. I wonder if it's really valid...
> > > 
> > > I'm not sure I'm following?  This seems to simply implement what drivers
> > > have been doing already as one function.  Why would it be invalid to reduce
> > > code duplication?
> > 
> > For two reasons:
> > 
> > 1) the helper has no inteligence whatsoever. It just calls the same
> > functions.
> > 
> > 2) the duplication will vanish whenever someone implements
> > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > and USB buses are doing today). This will just be yet another line that
> > needs to change.
> > 
> > Frankly though, no strong feelings, I just think it's a commit that
> > doesn't bring that any benefits other than looking like one line was
> > removed.
> and yes that is what it tries to do nothing more nothing less. If in future
> there are no users (today we have quite a few), then we can remove the dead
> macro, no harm. But that is not the situation today.

as I said, a commit that's bound to be useless. It's not like you're
saving 10 lines of code, it's only one. Replacing two simple lines with
a function which takes <joke> almost as many characters to type </joke>.

IMO, this is pretty useless and I'd rather not see them in the drivers I
maintain, sorry.

cheers

-- 
balbi

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 1937 bytes --]

On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > OK, I guess this is as good as it gets.
> > > > > > 
> > > > > > What tree would you like it go through?
> > > > > 
> > > > > Do we really need this new helper ? I mean, the very moment when we
> > > > > decide to implement ->runtime_idle() we will need to get rid of this
> > > > > change. I wonder if it's really valid...
> > > > 
> > > > I'm not sure I'm following?  This seems to simply implement what drivers
> > > > have been doing already as one function.  Why would it be invalid to reduce
> > > > code duplication?
> > > 
> > > For two reasons:
> > > 
> > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > functions.
> > > 
> > > 2) the duplication will vanish whenever someone implements
> > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > and USB buses are doing today). This will just be yet another line that
> > > needs to change.
> > > 
> > > Frankly though, no strong feelings, I just think it's a commit that
> > > doesn't bring that any benefits other than looking like one line was
> > > removed.
> > and yes that is what it tries to do nothing more nothing less. If in future
> > there are no users (today we have quite a few), then we can remove the dead
> > macro, no harm. But that is not the situation today.
> 
> as I said, a commit that's bound to be useless. It's not like you're
> saving 10 lines of code, it's only one. Replacing two simple lines with
> a function which takes <joke> almost as many characters to type </joke>.
> 
> IMO, this is pretty useless and I'd rather not see them in the drivers I
> maintain, sorry.

It is not a NACK from me; yet from a high-level perspective I agree with
Felipe.


[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 1937 bytes --]

On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > OK, I guess this is as good as it gets.
> > > > > > 
> > > > > > What tree would you like it go through?
> > > > > 
> > > > > Do we really need this new helper ? I mean, the very moment when we
> > > > > decide to implement ->runtime_idle() we will need to get rid of this
> > > > > change. I wonder if it's really valid...
> > > > 
> > > > I'm not sure I'm following?  This seems to simply implement what drivers
> > > > have been doing already as one function.  Why would it be invalid to reduce
> > > > code duplication?
> > > 
> > > For two reasons:
> > > 
> > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > functions.
> > > 
> > > 2) the duplication will vanish whenever someone implements
> > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > and USB buses are doing today). This will just be yet another line that
> > > needs to change.
> > > 
> > > Frankly though, no strong feelings, I just think it's a commit that
> > > doesn't bring that any benefits other than looking like one line was
> > > removed.
> > and yes that is what it tries to do nothing more nothing less. If in future
> > there are no users (today we have quite a few), then we can remove the dead
> > macro, no harm. But that is not the situation today.
> 
> as I said, a commit that's bound to be useless. It's not like you're
> saving 10 lines of code, it's only one. Replacing two simple lines with
> a function which takes <joke> almost as many characters to type </joke>.
> 
> IMO, this is pretty useless and I'd rather not see them in the drivers I
> maintain, sorry.

It is not a NACK from me; yet from a high-level perspective I agree with
Felipe.


[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Thursday, September 25, 2014 04:27:58 PM Wolfram Sang wrote:
> 
> --Bn2rw/3z4jIqBvZU
> Content-Type: text/plain; charset=us-ascii
> Content-Disposition: inline
> Content-Transfer-Encoding: quoted-printable
> 
> On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> > On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > > OK, I guess this is as good as it gets.
> > > > > > >=20
> > > > > > > What tree would you like it go through?
> > > > > >=20
> > > > > > Do we really need this new helper ? I mean, the very moment when =
> we
> > > > > > decide to implement ->runtime_idle() we will need to get rid of t=
> his
> > > > > > change. I wonder if it's really valid...
> > > > >=20
> > > > > I'm not sure I'm following?  This seems to simply implement what dr=
> ivers
> > > > > have been doing already as one function.  Why would it be invalid t=
> o reduce
> > > > > code duplication?
> > > >=20
> > > > For two reasons:
> > > >=20
> > > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > > functions.
> > > >=20
> > > > 2) the duplication will vanish whenever someone implements
> > > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > > and USB buses are doing today). This will just be yet another line th=
> at
> > > > needs to change.
> > > >=20
> > > > Frankly though, no strong feelings, I just think it's a commit that
> > > > doesn't bring that any benefits other than looking like one line was
> > > > removed.
> > > and yes that is what it tries to do nothing more nothing less. If in fu=
> ture
> > > there are no users (today we have quite a few), then we can remove the =
> dead
> > > macro, no harm. But that is not the situation today.
> >=20
> > as I said, a commit that's bound to be useless. It's not like you're
> > saving 10 lines of code, it's only one. Replacing two simple lines with
> > a function which takes <joke> almost as many characters to type </joke>.
> >=20
> > IMO, this is pretty useless and I'd rather not see them in the drivers I
> > maintain, sorry.
> 
> It is not a NACK from me; yet from a high-level perspective I agree with
> Felipe.

OK

I'd rather not merge something that driver people don't want to use.

Vinod?

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Thursday, September 25, 2014 04:27:58 PM Wolfram Sang wrote:
> 
> --Bn2rw/3z4jIqBvZU
> Content-Type: text/plain; charset=us-ascii
> Content-Disposition: inline
> Content-Transfer-Encoding: quoted-printable
> 
> On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> > On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > > OK, I guess this is as good as it gets.
> > > > > > > 
> > > > > > > What tree would you like it go through?
> > > > > > 
> > > > > > Do we really need this new helper ? I mean, the very moment when > we
> > > > > > decide to implement ->runtime_idle() we will need to get rid of t> his
> > > > > > change. I wonder if it's really valid...
> > > > > 
> > > > > I'm not sure I'm following?  This seems to simply implement what dr> ivers
> > > > > have been doing already as one function.  Why would it be invalid t> o reduce
> > > > > code duplication?
> > > > 
> > > > For two reasons:
> > > > 
> > > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > > functions.
> > > > 
> > > > 2) the duplication will vanish whenever someone implements
> > > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > > and USB buses are doing today). This will just be yet another line th> at
> > > > needs to change.
> > > > 
> > > > Frankly though, no strong feelings, I just think it's a commit that
> > > > doesn't bring that any benefits other than looking like one line was
> > > > removed.
> > > and yes that is what it tries to do nothing more nothing less. If in fu> ture
> > > there are no users (today we have quite a few), then we can remove the > dead
> > > macro, no harm. But that is not the situation today.
> > 
> > as I said, a commit that's bound to be useless. It's not like you're
> > saving 10 lines of code, it's only one. Replacing two simple lines with
> > a function which takes <joke> almost as many characters to type </joke>.
> > 
> > IMO, this is pretty useless and I'd rather not see them in the drivers I
> > maintain, sorry.
> 
> It is not a NACK from me; yet from a high-level perspective I agree with
> Felipe.

OK

I'd rather not merge something that driver people don't want to use.

Vinod?

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Thursday, September 25, 2014 04:27:58 PM Wolfram Sang wrote:
> 
> --Bn2rw/3z4jIqBvZU
> Content-Type: text/plain; charset=us-ascii
> Content-Disposition: inline
> Content-Transfer-Encoding: quoted-printable
> 
> On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> > On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > > OK, I guess this is as good as it gets.
> > > > > > >=20
> > > > > > > What tree would you like it go through?
> > > > > >=20
> > > > > > Do we really need this new helper ? I mean, the very moment when =
> we
> > > > > > decide to implement ->runtime_idle() we will need to get rid of t=
> his
> > > > > > change. I wonder if it's really valid...
> > > > >=20
> > > > > I'm not sure I'm following?  This seems to simply implement what dr=
> ivers
> > > > > have been doing already as one function.  Why would it be invalid t=
> o reduce
> > > > > code duplication?
> > > >=20
> > > > For two reasons:
> > > >=20
> > > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > > functions.
> > > >=20
> > > > 2) the duplication will vanish whenever someone implements
> > > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > > and USB buses are doing today). This will just be yet another line th=
> at
> > > > needs to change.
> > > >=20
> > > > Frankly though, no strong feelings, I just think it's a commit that
> > > > doesn't bring that any benefits other than looking like one line was
> > > > removed.
> > > and yes that is what it tries to do nothing more nothing less. If in fu=
> ture
> > > there are no users (today we have quite a few), then we can remove the =
> dead
> > > macro, no harm. But that is not the situation today.
> >=20
> > as I said, a commit that's bound to be useless. It's not like you're
> > saving 10 lines of code, it's only one. Replacing two simple lines with
> > a function which takes <joke> almost as many characters to type </joke>.
> >=20
> > IMO, this is pretty useless and I'd rather not see them in the drivers I
> > maintain, sorry.
> 
> It is not a NACK from me; yet from a high-level perspective I agree with
> Felipe.

OK

I'd rather not merge something that driver people don't want to use.

Vinod?

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Rafael J. Wysocki]

On Thursday, September 25, 2014 04:27:58 PM Wolfram Sang wrote:
> 
> --Bn2rw/3z4jIqBvZU
> Content-Type: text/plain; charset=us-ascii
> Content-Disposition: inline
> Content-Transfer-Encoding: quoted-printable
> 
> On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> > On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > > OK, I guess this is as good as it gets.
> > > > > > >=20
> > > > > > > What tree would you like it go through?
> > > > > >=20
> > > > > > Do we really need this new helper ? I mean, the very moment when =
> we
> > > > > > decide to implement ->runtime_idle() we will need to get rid of t=
> his
> > > > > > change. I wonder if it's really valid...
> > > > >=20
> > > > > I'm not sure I'm following?  This seems to simply implement what dr=
> ivers
> > > > > have been doing already as one function.  Why would it be invalid t=
> o reduce
> > > > > code duplication?
> > > >=20
> > > > For two reasons:
> > > >=20
> > > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > > functions.
> > > >=20
> > > > 2) the duplication will vanish whenever someone implements
> > > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > > and USB buses are doing today). This will just be yet another line th=
> at
> > > > needs to change.
> > > >=20
> > > > Frankly though, no strong feelings, I just think it's a commit that
> > > > doesn't bring that any benefits other than looking like one line was
> > > > removed.
> > > and yes that is what it tries to do nothing more nothing less. If in fu=
> ture
> > > there are no users (today we have quite a few), then we can remove the =
> dead
> > > macro, no harm. But that is not the situation today.
> >=20
> > as I said, a commit that's bound to be useless. It's not like you're
> > saving 10 lines of code, it's only one. Replacing two simple lines with
> > a function which takes <joke> almost as many characters to type </joke>.
> >=20
> > IMO, this is pretty useless and I'd rather not see them in the drivers I
> > maintain, sorry.
> 
> It is not a NACK from me; yet from a high-level perspective I agree with
> Felipe.

OK

I'd rather not merge something that driver people don't want to use.

Vinod?

-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

On Thu, Sep 25, 2014 at 09:54:36PM +0200, Rafael J. Wysocki wrote:
> On Thursday, September 25, 2014 04:27:58 PM Wolfram Sang wrote:
> > 
> > --Bn2rw/3z4jIqBvZU
> > Content-Type: text/plain; charset=us-ascii
> > Content-Disposition: inline
> > Content-Transfer-Encoding: quoted-printable
> > 
> > On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> > > On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > > > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > > > OK, I guess this is as good as it gets.
> > > > > > > >=20
> > > > > > > > What tree would you like it go through?
> > > > > > >=20
> > > > > > > Do we really need this new helper ? I mean, the very moment when =
> > we
> > > > > > > decide to implement ->runtime_idle() we will need to get rid of t=
> > his
> > > > > > > change. I wonder if it's really valid...
> > > > > >=20
> > > > > > I'm not sure I'm following?  This seems to simply implement what dr=
> > ivers
> > > > > > have been doing already as one function.  Why would it be invalid t=
> > o reduce
> > > > > > code duplication?
> > > > >=20
> > > > > For two reasons:
> > > > >=20
> > > > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > > > functions.
> > > > >=20
> > > > > 2) the duplication will vanish whenever someone implements
> > > > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > > > and USB buses are doing today). This will just be yet another line th=
> > at
> > > > > needs to change.
> > > > >=20
> > > > > Frankly though, no strong feelings, I just think it's a commit that
> > > > > doesn't bring that any benefits other than looking like one line was
> > > > > removed.
> > > > and yes that is what it tries to do nothing more nothing less. If in fu=
> > ture
> > > > there are no users (today we have quite a few), then we can remove the =
> > dead
> > > > macro, no harm. But that is not the situation today.
> > >=20
> > > as I said, a commit that's bound to be useless. It's not like you're
> > > saving 10 lines of code, it's only one. Replacing two simple lines with
> > > a function which takes <joke> almost as many characters to type </joke>.
> > >=20
> > > IMO, this is pretty useless and I'd rather not see them in the drivers I
> > > maintain, sorry.
> > 
> > It is not a NACK from me; yet from a high-level perspective I agree with
> > Felipe.
> 
> OK
> 
> I'd rather not merge something that driver people don't want to use.
> 
> Vinod?
There have been quite a few ACKs as well. Either way am okay. If you feel
this will get removed as discussed, then there is no point in merging

-- 
~Vinod

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

On Thu, Sep 25, 2014 at 09:54:36PM +0200, Rafael J. Wysocki wrote:
> On Thursday, September 25, 2014 04:27:58 PM Wolfram Sang wrote:
> > 
> > --Bn2rw/3z4jIqBvZU
> > Content-Type: text/plain; charset=us-ascii
> > Content-Disposition: inline
> > Content-Transfer-Encoding: quoted-printable
> > 
> > On Thu, Sep 25, 2014 at 09:22:01AM -0500, Felipe Balbi wrote:
> > > On Thu, Sep 25, 2014 at 01:27:18PM +0530, Vinod Koul wrote:
> > > > On Wed, Sep 24, 2014 at 03:32:19PM -0500, Felipe Balbi wrote:
> > > > > > > > OK, I guess this is as good as it gets.
> > > > > > > >=20
> > > > > > > > What tree would you like it go through?
> > > > > > >=20
> > > > > > > Do we really need this new helper ? I mean, the very moment when =
> > we
> > > > > > > decide to implement ->runtime_idle() we will need to get rid of t=
> > his
> > > > > > > change. I wonder if it's really valid...
> > > > > >=20
> > > > > > I'm not sure I'm following?  This seems to simply implement what dr=
> > ivers
> > > > > > have been doing already as one function.  Why would it be invalid t=
> > o reduce
> > > > > > code duplication?
> > > > >=20
> > > > > For two reasons:
> > > > >=20
> > > > > 1) the helper has no inteligence whatsoever. It just calls the same
> > > > > functions.
> > > > >=20
> > > > > 2) the duplication will vanish whenever someone implements
> > > > > ->runtime_idle() and have that call pm_runtime_autosuspend() (like PCI
> > > > > and USB buses are doing today). This will just be yet another line th=
> > at
> > > > > needs to change.
> > > > >=20
> > > > > Frankly though, no strong feelings, I just think it's a commit that
> > > > > doesn't bring that any benefits other than looking like one line was
> > > > > removed.
> > > > and yes that is what it tries to do nothing more nothing less. If in fu=
> > ture
> > > > there are no users (today we have quite a few), then we can remove the =
> > dead
> > > > macro, no harm. But that is not the situation today.
> > >=20
> > > as I said, a commit that's bound to be useless. It's not like you're
> > > saving 10 lines of code, it's only one. Replacing two simple lines with
> > > a function which takes <joke> almost as many characters to type </joke>.
> > >=20
> > > IMO, this is pretty useless and I'd rather not see them in the drivers I
> > > maintain, sorry.
> > 
> > It is not a NACK from me; yet from a high-level perspective I agree with
> > Felipe.
> 
> OK
> 
> I'd rather not merge something that driver people don't want to use.
> 
> Vinod?
There have been quite a few ACKs as well. Either way am okay. If you feel
this will get removed as discussed, then there is no point in merging

-- 
~Vinod

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> 
> OK, I guess this is as good as it gets.
> 
> What tree would you like it go through?

Since rest of the patches are dependent upon 1st patch which should go thru
your tree, we should merge this thru your tree

Thanks
-- 
~Vinod

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> 
> OK, I guess this is as good as it gets.
> 
> What tree would you like it go through?

Since rest of the patches are dependent upon 1st patch which should go thru
your tree, we should merge this thru your tree

Thanks
-- 
~Vinod

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> 
> OK, I guess this is as good as it gets.
> 
> What tree would you like it go through?

Since rest of the patches are dependent upon 1st patch which should go thru
your tree, we should merge this thru your tree

Thanks
-- 
~Vinod

Re: [PATCH 00/27] add pm_runtime_last_busy_and_autosuspend() helper

[Vinod Koul]

On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
> 
> OK, I guess this is as good as it gets.
> 
> What tree would you like it go through?

Since rest of the patches are dependent upon 1st patch which should go thru
your tree, we should merge this thru your tree

Thanks
-- 
~Vinod