[PATCH 0/4] drm/mgag200: Workaround HW bug with non-0 offset

[PATCH 0/4] drm/mgag200: Workaround HW bug with non-0 offset

[Thomas Zimmermann]

We found an MGA chip that does not interpret the scanout offset
correctly. This patch works around the problem by placing all buffer
objects at offset 0 on this system.

There's a new module parameter 'hw_bug_no_startadd' that enables and
disables the offset-0 placement. Default is auto-detection.

Thomas Zimmermann (4):
  drm/mgag200: Extract device type from flags
  drm/mgag200: Store flags from PCI driver data in device structure
  drm/mgag200: Add workaround for HW that does not support 'startadd'
  drm/mgag200: Add module parameter to pin all buffers at offset 0

 drivers/gpu/drm/mgag200/mgag200_drv.c  | 44 +++++++++++++++++++++++++-
 drivers/gpu/drm/mgag200/mgag200_drv.h  | 18 +++++++++++
 drivers/gpu/drm/mgag200/mgag200_main.c |  3 +-
 3 files changed, 63 insertions(+), 2 deletions(-)

--
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 1/4] drm/mgag200: Extract device type from flags

[Thomas Zimmermann]

Adds a conversion function that extracts the device type from the
PCI id-table flags. Allows for storing additional information in the
other flag bits.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/gpu/drm/mgag200/mgag200_drv.h  | 7 +++++++
 drivers/gpu/drm/mgag200/mgag200_main.c | 2 +-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
index 0ea9a525e57d..976404634092 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.h
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
@@ -150,6 +150,8 @@ enum mga_type {
 	G200_EW3,
 };
 
+#define MGAG200_TYPE_MASK	(0x000000ff)
+
 #define IS_G200_SE(mdev) (mdev->type == G200_SE_A || mdev->type == G200_SE_B)
 
 struct mga_device {
@@ -181,6 +183,11 @@ struct mga_device {
 	u32 unique_rev_id;
 };
 
+static inline enum mga_type
+mgag200_type_from_driver_data(kernel_ulong_t driver_data)
+{
+	return (enum mga_type)(driver_data & MGAG200_TYPE_MASK);
+}
 				/* mgag200_mode.c */
 int mgag200_modeset_init(struct mga_device *mdev);
 void mgag200_modeset_fini(struct mga_device *mdev);
diff --git a/drivers/gpu/drm/mgag200/mgag200_main.c b/drivers/gpu/drm/mgag200/mgag200_main.c
index 5f74aabcd3df..517c5693ad69 100644
--- a/drivers/gpu/drm/mgag200/mgag200_main.c
+++ b/drivers/gpu/drm/mgag200/mgag200_main.c
@@ -94,7 +94,7 @@ static int mgag200_device_init(struct drm_device *dev,
 	struct mga_device *mdev = dev->dev_private;
 	int ret, option;
 
-	mdev->type = flags;
+	mdev->type = mgag200_type_from_driver_data(flags);
 
 	/* Hardcode the number of CRTCs to 1 */
 	mdev->num_crtc = 1;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 2/4] drm/mgag200: Store flags from PCI driver data in device structure

[Thomas Zimmermann]

The flags field in struct mga_device has been unused so far. We now
use it to store flag bits from the PCI driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/gpu/drm/mgag200/mgag200_drv.h  | 8 ++++++++
 drivers/gpu/drm/mgag200/mgag200_main.c | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
index 976404634092..4b4f9ce74a84 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.h
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
@@ -151,6 +151,7 @@ enum mga_type {
 };
 
 #define MGAG200_TYPE_MASK	(0x000000ff)
+#define MGAG200_FLAG_MASK	(0x00ffff00)
 
 #define IS_G200_SE(mdev) (mdev->type == G200_SE_A || mdev->type == G200_SE_B)
 
@@ -188,6 +189,13 @@ mgag200_type_from_driver_data(kernel_ulong_t driver_data)
 {
 	return (enum mga_type)(driver_data & MGAG200_TYPE_MASK);
 }
+
+static inline unsigned long
+mgag200_flags_from_driver_data(kernel_ulong_t driver_data)
+{
+	return driver_data & MGAG200_FLAG_MASK;
+}
+
 				/* mgag200_mode.c */
 int mgag200_modeset_init(struct mga_device *mdev);
 void mgag200_modeset_fini(struct mga_device *mdev);
diff --git a/drivers/gpu/drm/mgag200/mgag200_main.c b/drivers/gpu/drm/mgag200/mgag200_main.c
index 517c5693ad69..e1bc5b0aa774 100644
--- a/drivers/gpu/drm/mgag200/mgag200_main.c
+++ b/drivers/gpu/drm/mgag200/mgag200_main.c
@@ -94,6 +94,7 @@ static int mgag200_device_init(struct drm_device *dev,
 	struct mga_device *mdev = dev->dev_private;
 	int ret, option;
 
+	mdev->flags = mgag200_flags_from_driver_data(flags);
 	mdev->type = mgag200_type_from_driver_data(flags);
 
 	/* Hardcode the number of CRTCs to 1 */
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Thomas Zimmermann]

There's at least one system that does not interpret the value of
the device's 'startadd' field correctly, which leads to incorrectly
displayed scanout buffers. Always placing the active scanout buffer
at offset 0 works around the problem.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: John Donnelly <john.p.donnelly@oracle.com>
Link: https://gitlab.freedesktop.org/drm/misc/issues/7
---
 drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
 drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
 2 files changed, 38 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
index 397f8b0a9af8..d43951caeea0 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.c
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
@@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
 static struct drm_driver driver;
 
 static const struct pci_device_id pciidlist[] = {
+	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
+		G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
 	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_A },
 	{ PCI_VENDOR_ID_MATROX, 0x524, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_B },
 	{ PCI_VENDOR_ID_MATROX, 0x530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_EV },
@@ -60,6 +62,35 @@ static void mga_pci_remove(struct pci_dev *pdev)
 
 DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
 
+static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
+{
+	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
+}
+
+int mgag200_driver_dumb_create(struct drm_file *file,
+			       struct drm_device *dev,
+			       struct drm_mode_create_dumb *args)
+{
+	struct mga_device *mdev = dev->dev_private;
+	unsigned long pg_align;
+
+	if (WARN_ONCE(!dev->vram_mm, "VRAM MM not initialized"))
+		return -EINVAL;
+
+	pg_align = 0ul;
+
+	/*
+	 * Aligning scanout buffers to the size of the video ram forces
+	 * placement at offset 0. Works around a bug where HW does not
+	 * respect 'startadd' field.
+	 */
+	if (mgag200_pin_bo_at_0(mdev))
+		pg_align = PFN_UP(mdev->mc.vram_size);
+
+	return drm_gem_vram_fill_create_dumb(file, dev, &dev->vram_mm->bdev,
+					     pg_align, false, args);
+}
+
 static struct drm_driver driver = {
 	.driver_features = DRIVER_GEM | DRIVER_MODESET,
 	.load = mgag200_driver_load,
@@ -71,7 +102,10 @@ static struct drm_driver driver = {
 	.major = DRIVER_MAJOR,
 	.minor = DRIVER_MINOR,
 	.patchlevel = DRIVER_PATCHLEVEL,
-	DRM_GEM_VRAM_DRIVER
+	.debugfs_init = drm_vram_mm_debugfs_init,
+	.dumb_create = mgag200_driver_dumb_create,
+	.dumb_map_offset = drm_gem_vram_driver_dumb_mmap_offset,
+	.gem_prime_mmap = drm_gem_prime_mmap,
 };
 
 static struct pci_driver mgag200_pci_driver = {
diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
index 4b4f9ce74a84..aa32aad222c2 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.h
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
@@ -150,6 +150,9 @@ enum mga_type {
 	G200_EW3,
 };
 
+/* HW does not handle 'startadd' field correct. */
+#define MGAG200_FLAG_HW_BUG_NO_STARTADD	(1ul << 8)
+
 #define MGAG200_TYPE_MASK	(0x000000ff)
 #define MGAG200_FLAG_MASK	(0x00ffff00)
 
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 4/4] drm/mgag200: Add module parameter to pin all buffers at offset 0

[Thomas Zimmermann]

For hardware that does not interpret the startadd field correctly,
add the module parameter 'hw_bug_no_startadd', which enables the
workaround.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 drivers/gpu/drm/mgag200/mgag200_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
index d43951caeea0..79836b09a54a 100644
--- a/drivers/gpu/drm/mgag200/mgag200_drv.c
+++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
@@ -27,6 +27,10 @@ int mgag200_modeset = -1;
 MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
 module_param_named(modeset, mgag200_modeset, int, 0400);
 
+int mgag200_hw_bug_no_startadd = -1;
+MODULE_PARM_DESC(modeset, "HW does not interpret scanout-buffer start address correctly");
+module_param_named(hw_bug_no_startadd, mgag200_hw_bug_no_startadd, int, 0400);
+
 static struct drm_driver driver;
 
 static const struct pci_device_id pciidlist[] = {
@@ -64,6 +68,10 @@ DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
 
 static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
 {
+	if (!mgag200_hw_bug_no_startadd)
+		return false;
+	else if (mgag200_hw_bug_no_startadd > 0)
+		return true;
 	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
 }
 
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Daniel Vetter]

On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
> There's at least one system that does not interpret the value of
> the device's 'startadd' field correctly, which leads to incorrectly
> displayed scanout buffers. Always placing the active scanout buffer
> at offset 0 works around the problem.
> 
> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
> Link: https://gitlab.freedesktop.org/drm/misc/issues/7

Tested-by: John Donnelly <john.p.donnelly@oracle.com>

(Not quite this patch, but pretty much the logic, so counts).

Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
Cc: <stable@vger.kernel.org> # v5.3+

Also you need the stable line on both prep patches too. For next time
around,

$ dim fixes 81da87f63a1e

will generate all the stuff you need, including a good set of suggested
Cc: you should have.

On the first 3 patches, with all that stuff added:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Please push these to drm-misc-next-fixes so they get backported as quickly
as possible.
-Daniel

> ---
>  drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
>  drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
>  2 files changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
> index 397f8b0a9af8..d43951caeea0 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
>  static struct drm_driver driver;
>  
>  static const struct pci_device_id pciidlist[] = {
> +	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
> +		G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
>  	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_A },
>  	{ PCI_VENDOR_ID_MATROX, 0x524, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_B },
>  	{ PCI_VENDOR_ID_MATROX, 0x530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_EV },
> @@ -60,6 +62,35 @@ static void mga_pci_remove(struct pci_dev *pdev)
>  
>  DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
>  
> +static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
> +{
> +	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
> +}
> +
> +int mgag200_driver_dumb_create(struct drm_file *file,
> +			       struct drm_device *dev,
> +			       struct drm_mode_create_dumb *args)
> +{
> +	struct mga_device *mdev = dev->dev_private;
> +	unsigned long pg_align;
> +
> +	if (WARN_ONCE(!dev->vram_mm, "VRAM MM not initialized"))
> +		return -EINVAL;
> +
> +	pg_align = 0ul;
> +
> +	/*
> +	 * Aligning scanout buffers to the size of the video ram forces
> +	 * placement at offset 0. Works around a bug where HW does not
> +	 * respect 'startadd' field.
> +	 */
> +	if (mgag200_pin_bo_at_0(mdev))
> +		pg_align = PFN_UP(mdev->mc.vram_size);
> +
> +	return drm_gem_vram_fill_create_dumb(file, dev, &dev->vram_mm->bdev,
> +					     pg_align, false, args);
> +}
> +
>  static struct drm_driver driver = {
>  	.driver_features = DRIVER_GEM | DRIVER_MODESET,
>  	.load = mgag200_driver_load,
> @@ -71,7 +102,10 @@ static struct drm_driver driver = {
>  	.major = DRIVER_MAJOR,
>  	.minor = DRIVER_MINOR,
>  	.patchlevel = DRIVER_PATCHLEVEL,
> -	DRM_GEM_VRAM_DRIVER
> +	.debugfs_init = drm_vram_mm_debugfs_init,
> +	.dumb_create = mgag200_driver_dumb_create,
> +	.dumb_map_offset = drm_gem_vram_driver_dumb_mmap_offset,
> +	.gem_prime_mmap = drm_gem_prime_mmap,
>  };
>  
>  static struct pci_driver mgag200_pci_driver = {
> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
> index 4b4f9ce74a84..aa32aad222c2 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_drv.h
> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
> @@ -150,6 +150,9 @@ enum mga_type {
>  	G200_EW3,
>  };
>  
> +/* HW does not handle 'startadd' field correct. */
> +#define MGAG200_FLAG_HW_BUG_NO_STARTADD	(1ul << 8)
> +
>  #define MGAG200_TYPE_MASK	(0x000000ff)
>  #define MGAG200_FLAG_MASK	(0x00ffff00)
>  
> -- 
> 2.23.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 4/4] drm/mgag200: Add module parameter to pin all buffers at offset 0

[Daniel Vetter]

On Tue, Nov 26, 2019 at 08:25:45AM +0100, Thomas Zimmermann wrote:
> For hardware that does not interpret the startadd field correctly,
> add the module parameter 'hw_bug_no_startadd', which enables the
> workaround.
> 
> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> ---
>  drivers/gpu/drm/mgag200/mgag200_drv.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
> index d43951caeea0..79836b09a54a 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
> @@ -27,6 +27,10 @@ int mgag200_modeset = -1;
>  MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
>  module_param_named(modeset, mgag200_modeset, int, 0400);
>  
> +int mgag200_hw_bug_no_startadd = -1;
> +MODULE_PARM_DESC(modeset, "HW does not interpret scanout-buffer start address correctly");
> +module_param_named(hw_bug_no_startadd, mgag200_hw_bug_no_startadd, int, 0400);
> +
>  static struct drm_driver driver;
>  
>  static const struct pci_device_id pciidlist[] = {
> @@ -64,6 +68,10 @@ DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
>  
>  static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
>  {

I'd add a infor printing if the module option is non-zero that people
should submit a bug report if this fixes their issue. We don't want people
fixing bugs with module options, stuff should work by default.

With that addressed:

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

> +	if (!mgag200_hw_bug_no_startadd)
> +		return false;
> +	else if (mgag200_hw_bug_no_startadd > 0)
> +		return true;
>  	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
>  }
>  
> -- 
> 2.23.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Thomas Zimmermann]

[-- Attachment #1.1.1: Type: text/plain, Size: 4854 bytes --]

Hi

Am 26.11.19 um 10:37 schrieb Daniel Vetter:
> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
>> There's at least one system that does not interpret the value of
>> the device's 'startadd' field correctly, which leads to incorrectly
>> displayed scanout buffers. Always placing the active scanout buffer
>> at offset 0 works around the problem.
>>
>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
> 
> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
> 
> (Not quite this patch, but pretty much the logic, so counts).
> 
> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
> Cc: <stable@vger.kernel.org> # v5.3+
> 
> Also you need the stable line on both prep patches too. For next time
> around,
> 
> $ dim fixes 81da87f63a1e
> 
> will generate all the stuff you need, including a good set of suggested
> Cc: you should have.
> 
> On the first 3 patches, with all that stuff added:
> 
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Thanks for the review.

Sorry for leaving out some of the tags. I wanted to wait for feedback
before adding tested-by, fixes, stable. I'll split off patch 4 from the
series and get 1 to 3 merged ASAP.

Best regards
Thomas

> 
> Please push these to drm-misc-next-fixes so they get backported as quickly
> as possible.
> -Daniel
> 
>> ---
>>  drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
>>  drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
>>  2 files changed, 38 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
>> index 397f8b0a9af8..d43951caeea0 100644
>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
>>  static struct drm_driver driver;
>>  
>>  static const struct pci_device_id pciidlist[] = {
>> +	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
>> +		G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
>>  	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_A },
>>  	{ PCI_VENDOR_ID_MATROX, 0x524, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_B },
>>  	{ PCI_VENDOR_ID_MATROX, 0x530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_EV },
>> @@ -60,6 +62,35 @@ static void mga_pci_remove(struct pci_dev *pdev)
>>  
>>  DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
>>  
>> +static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
>> +{
>> +	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
>> +}
>> +
>> +int mgag200_driver_dumb_create(struct drm_file *file,
>> +			       struct drm_device *dev,
>> +			       struct drm_mode_create_dumb *args)
>> +{
>> +	struct mga_device *mdev = dev->dev_private;
>> +	unsigned long pg_align;
>> +
>> +	if (WARN_ONCE(!dev->vram_mm, "VRAM MM not initialized"))
>> +		return -EINVAL;
>> +
>> +	pg_align = 0ul;
>> +
>> +	/*
>> +	 * Aligning scanout buffers to the size of the video ram forces
>> +	 * placement at offset 0. Works around a bug where HW does not
>> +	 * respect 'startadd' field.
>> +	 */
>> +	if (mgag200_pin_bo_at_0(mdev))
>> +		pg_align = PFN_UP(mdev->mc.vram_size);
>> +
>> +	return drm_gem_vram_fill_create_dumb(file, dev, &dev->vram_mm->bdev,
>> +					     pg_align, false, args);
>> +}
>> +
>>  static struct drm_driver driver = {
>>  	.driver_features = DRIVER_GEM | DRIVER_MODESET,
>>  	.load = mgag200_driver_load,
>> @@ -71,7 +102,10 @@ static struct drm_driver driver = {
>>  	.major = DRIVER_MAJOR,
>>  	.minor = DRIVER_MINOR,
>>  	.patchlevel = DRIVER_PATCHLEVEL,
>> -	DRM_GEM_VRAM_DRIVER
>> +	.debugfs_init = drm_vram_mm_debugfs_init,
>> +	.dumb_create = mgag200_driver_dumb_create,
>> +	.dumb_map_offset = drm_gem_vram_driver_dumb_mmap_offset,
>> +	.gem_prime_mmap = drm_gem_prime_mmap,
>>  };
>>  
>>  static struct pci_driver mgag200_pci_driver = {
>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
>> index 4b4f9ce74a84..aa32aad222c2 100644
>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.h
>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
>> @@ -150,6 +150,9 @@ enum mga_type {
>>  	G200_EW3,
>>  };
>>  
>> +/* HW does not handle 'startadd' field correct. */
>> +#define MGAG200_FLAG_HW_BUG_NO_STARTADD	(1ul << 8)
>> +
>>  #define MGAG200_TYPE_MASK	(0x000000ff)
>>  #define MGAG200_FLAG_MASK	(0x00ffff00)
>>  
>> -- 
>> 2.23.0
>>
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[John Donnelly]

Hi ,

See below ,


> On Nov 26, 2019, at 3:50 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> 
> Hi
> 
> Am 26.11.19 um 10:37 schrieb Daniel Vetter:
>> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
>>> There's at least one system that does not interpret the value of
>>> the device's 'startadd' field correctly, which leads to incorrectly
>>> displayed scanout buffers. Always placing the active scanout buffer
>>> at offset 0 works around the problem.
>>> 
>>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
>>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
>> 
>> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
>> 
>> (Not quite this patch, but pretty much the logic, so counts).
>> 
>> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
>> Cc: <stable@vger.kernel.org> # v5.3+
>> 
>> Also you need the stable line on both prep patches too. For next time
>> around,
>> 
>> $ dim fixes 81da87f63a1e
>> 
>> will generate all the stuff you need, including a good set of suggested
>> Cc: you should have.
>> 
>> On the first 3 patches, with all that stuff added:
>> 
>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> 
> Thanks for the review.
> 
> Sorry for leaving out some of the tags. I wanted to wait for feedback
> before adding tested-by, fixes, stable. I'll split off patch 4 from the
> series and get 1 to 3 merged ASAP.
> 
> Best regards
> Thomas
> 
>> 
>> Please push these to drm-misc-next-fixes so they get backported as quickly
>> as possible.
>> -Daniel
>> 
>>> ---
>>> drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
>>> drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
>>> 2 files changed, 38 insertions(+), 1 deletion(-)
>>> 
>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>> index 397f8b0a9af8..d43951caeea0 100644
>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
>>> static struct drm_driver driver;
>>> 
>>> static const struct pci_device_id pciidlist[] = {
>>> +	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
>>> +		G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},



I will have an additional list of vendor IDs (0x4852)  I will provide in a follow up patch shortly .  This fixes only 1 flavor  of server.


Thank you .






>>> 	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_A },
>>> 	{ PCI_VENDOR_ID_MATROX, 0x524, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_B },
>>> 	{ PCI_VENDOR_ID_MATROX, 0x530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_EV },
>>> @@ -60,6 +62,35 @@ static void mga_pci_remove(struct pci_dev *pdev)
>>> 
>>> DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
>>> 
>>> +static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
>>> +{
>>> +	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
>>> +}
>>> +
>>> +int mgag200_driver_dumb_create(struct drm_file *file,
>>> +			       struct drm_device *dev,
>>> +			       struct drm_mode_create_dumb *args)
>>> +{
>>> +	struct mga_device *mdev = dev->dev_private;
>>> +	unsigned long pg_align;
>>> +
>>> +	if (WARN_ONCE(!dev->vram_mm, "VRAM MM not initialized"))
>>> +		return -EINVAL;
>>> +
>>> +	pg_align = 0ul;
>>> +
>>> +	/*
>>> +	 * Aligning scanout buffers to the size of the video ram forces
>>> +	 * placement at offset 0. Works around a bug where HW does not
>>> +	 * respect 'startadd' field.
>>> +	 */
>>> +	if (mgag200_pin_bo_at_0(mdev))
>>> +		pg_align = PFN_UP(mdev->mc.vram_size);
>>> +
>>> +	return drm_gem_vram_fill_create_dumb(file, dev, &dev->vram_mm->bdev,
>>> +					     pg_align, false, args);
>>> +}
>>> +
>>> static struct drm_driver driver = {
>>> 	.driver_features = DRIVER_GEM | DRIVER_MODESET,
>>> 	.load = mgag200_driver_load,
>>> @@ -71,7 +102,10 @@ static struct drm_driver driver = {
>>> 	.major = DRIVER_MAJOR,
>>> 	.minor = DRIVER_MINOR,
>>> 	.patchlevel = DRIVER_PATCHLEVEL,
>>> -	DRM_GEM_VRAM_DRIVER
>>> +	.debugfs_init = drm_vram_mm_debugfs_init,
>>> +	.dumb_create = mgag200_driver_dumb_create,
>>> +	.dumb_map_offset = drm_gem_vram_driver_dumb_mmap_offset,
>>> +	.gem_prime_mmap = drm_gem_prime_mmap,
>>> };
>>> 
>>> static struct pci_driver mgag200_pci_driver = {
>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
>>> index 4b4f9ce74a84..aa32aad222c2 100644
>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.h
>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
>>> @@ -150,6 +150,9 @@ enum mga_type {
>>> 	G200_EW3,
>>> };
>>> 
>>> +/* HW does not handle 'startadd' field correct. */
>>> +#define MGAG200_FLAG_HW_BUG_NO_STARTADD	(1ul << 8)
>>> +
>>> #define MGAG200_TYPE_MASK	(0x000000ff)
>>> #define MGAG200_FLAG_MASK	(0x00ffff00)
>>> 
>>> -- 
>>> 2.23.0
>>> 
>> 
> 
> -- 
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Maxfeldstr. 5, 90409 Nürnberg, Germany
> (HRB 36809, AG Nürnberg)
> Geschäftsführer: Felix Imendörffer
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Thomas Zimmermann]

[-- Attachment #1.1.1: Type: text/plain, Size: 6307 bytes --]

Hi John

Am 03.12.19 um 18:55 schrieb John Donnelly:
> Hi ,
> 
> See below ,
> 
> 
>> On Nov 26, 2019, at 3:50 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>
>> Hi
>>
>> Am 26.11.19 um 10:37 schrieb Daniel Vetter:
>>> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
>>>> There's at least one system that does not interpret the value of
>>>> the device's 'startadd' field correctly, which leads to incorrectly
>>>> displayed scanout buffers. Always placing the active scanout buffer
>>>> at offset 0 works around the problem.
>>>>
>>>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>>>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
>>>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
>>>
>>> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
>>>
>>> (Not quite this patch, but pretty much the logic, so counts).
>>>
>>> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
>>> Cc: <stable@vger.kernel.org> # v5.3+
>>>
>>> Also you need the stable line on both prep patches too. For next time
>>> around,
>>>
>>> $ dim fixes 81da87f63a1e
>>>
>>> will generate all the stuff you need, including a good set of suggested
>>> Cc: you should have.
>>>
>>> On the first 3 patches, with all that stuff added:
>>>
>>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>>
>> Thanks for the review.
>>
>> Sorry for leaving out some of the tags. I wanted to wait for feedback
>> before adding tested-by, fixes, stable. I'll split off patch 4 from the
>> series and get 1 to 3 merged ASAP.
>>
>> Best regards
>> Thomas
>>
>>>
>>> Please push these to drm-misc-next-fixes so they get backported as quickly
>>> as possible.
>>> -Daniel
>>>
>>>> ---
>>>> drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
>>>> drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
>>>> 2 files changed, 38 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>> index 397f8b0a9af8..d43951caeea0 100644
>>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
>>>> static struct drm_driver driver;
>>>>
>>>> static const struct pci_device_id pciidlist[] = {
>>>> +	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
>>>> +		G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
> 
> 
> 
> I will have an additional list of vendor IDs (0x4852)  I will provide in a follow up patch shortly .  This fixes only 1 flavor  of server.

Thank you for all the testing you do. We can add these ids as necessary.

Before, I posted a patch at [1] that prints an internal unique id. The
id of your original test machine was 0x2 IIRC.

My guess is that the problem might be related to the chip's revision. If
you have the option of booting your own kernels on all these machines,
could you apply the patch and look for a pattern in these ids? Maybe
only revision 0x2 is affected.

Best regards
Thomas


[1]
https://gitlab.freedesktop.org/drm/misc/uploads/1d5d9a75571c2bac71f80e0d2411e840/0001-drm-mgag200-Print-unique-revision-id-for-G200SE.patch

> 
> 
> Thank you .
> 
> 
> 
> 
> 
> 
>>>> 	{ PCI_VENDOR_ID_MATROX, 0x522, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_A },
>>>> 	{ PCI_VENDOR_ID_MATROX, 0x524, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_SE_B },
>>>> 	{ PCI_VENDOR_ID_MATROX, 0x530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, G200_EV },
>>>> @@ -60,6 +62,35 @@ static void mga_pci_remove(struct pci_dev *pdev)
>>>>
>>>> DEFINE_DRM_GEM_FOPS(mgag200_driver_fops);
>>>>
>>>> +static bool mgag200_pin_bo_at_0(const struct mga_device *mdev)
>>>> +{
>>>> +	return mdev->flags & MGAG200_FLAG_HW_BUG_NO_STARTADD;
>>>> +}
>>>> +
>>>> +int mgag200_driver_dumb_create(struct drm_file *file,
>>>> +			       struct drm_device *dev,
>>>> +			       struct drm_mode_create_dumb *args)
>>>> +{
>>>> +	struct mga_device *mdev = dev->dev_private;
>>>> +	unsigned long pg_align;
>>>> +
>>>> +	if (WARN_ONCE(!dev->vram_mm, "VRAM MM not initialized"))
>>>> +		return -EINVAL;
>>>> +
>>>> +	pg_align = 0ul;
>>>> +
>>>> +	/*
>>>> +	 * Aligning scanout buffers to the size of the video ram forces
>>>> +	 * placement at offset 0. Works around a bug where HW does not
>>>> +	 * respect 'startadd' field.
>>>> +	 */
>>>> +	if (mgag200_pin_bo_at_0(mdev))
>>>> +		pg_align = PFN_UP(mdev->mc.vram_size);
>>>> +
>>>> +	return drm_gem_vram_fill_create_dumb(file, dev, &dev->vram_mm->bdev,
>>>> +					     pg_align, false, args);
>>>> +}
>>>> +
>>>> static struct drm_driver driver = {
>>>> 	.driver_features = DRIVER_GEM | DRIVER_MODESET,
>>>> 	.load = mgag200_driver_load,
>>>> @@ -71,7 +102,10 @@ static struct drm_driver driver = {
>>>> 	.major = DRIVER_MAJOR,
>>>> 	.minor = DRIVER_MINOR,
>>>> 	.patchlevel = DRIVER_PATCHLEVEL,
>>>> -	DRM_GEM_VRAM_DRIVER
>>>> +	.debugfs_init = drm_vram_mm_debugfs_init,
>>>> +	.dumb_create = mgag200_driver_dumb_create,
>>>> +	.dumb_map_offset = drm_gem_vram_driver_dumb_mmap_offset,
>>>> +	.gem_prime_mmap = drm_gem_prime_mmap,
>>>> };
>>>>
>>>> static struct pci_driver mgag200_pci_driver = {
>>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.h b/drivers/gpu/drm/mgag200/mgag200_drv.h
>>>> index 4b4f9ce74a84..aa32aad222c2 100644
>>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.h
>>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.h
>>>> @@ -150,6 +150,9 @@ enum mga_type {
>>>> 	G200_EW3,
>>>> };
>>>>
>>>> +/* HW does not handle 'startadd' field correct. */
>>>> +#define MGAG200_FLAG_HW_BUG_NO_STARTADD	(1ul << 8)
>>>> +
>>>> #define MGAG200_TYPE_MASK	(0x000000ff)
>>>> #define MGAG200_FLAG_MASK	(0x00ffff00)
>>>>
>>>> -- 
>>>> 2.23.0
>>>>
>>>
>>
>> -- 
>> Thomas Zimmermann
>> Graphics Driver Developer
>> SUSE Software Solutions Germany GmbH
>> Maxfeldstr. 5, 90409 Nürnberg, Germany
>> (HRB 36809, AG Nürnberg)
>> Geschäftsführer: Felix Imendörffer
>>
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Dave Airlie]

On Wed, 4 Dec 2019 at 17:30, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>
> Hi John
>
> Am 03.12.19 um 18:55 schrieb John Donnelly:
> > Hi ,
> >
> > See below ,
> >
> >
> >> On Nov 26, 2019, at 3:50 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> >>
> >> Hi
> >>
> >> Am 26.11.19 um 10:37 schrieb Daniel Vetter:
> >>> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
> >>>> There's at least one system that does not interpret the value of
> >>>> the device's 'startadd' field correctly, which leads to incorrectly
> >>>> displayed scanout buffers. Always placing the active scanout buffer
> >>>> at offset 0 works around the problem.
> >>>>
> >>>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> >>>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
> >>>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
> >>>
> >>> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
> >>>
> >>> (Not quite this patch, but pretty much the logic, so counts).
> >>>
> >>> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
> >>> Cc: <stable@vger.kernel.org> # v5.3+
> >>>
> >>> Also you need the stable line on both prep patches too. For next time
> >>> around,
> >>>
> >>> $ dim fixes 81da87f63a1e
> >>>
> >>> will generate all the stuff you need, including a good set of suggested
> >>> Cc: you should have.
> >>>
> >>> On the first 3 patches, with all that stuff added:
> >>>
> >>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> >>
> >> Thanks for the review.
> >>
> >> Sorry for leaving out some of the tags. I wanted to wait for feedback
> >> before adding tested-by, fixes, stable. I'll split off patch 4 from the
> >> series and get 1 to 3 merged ASAP.
> >>
> >> Best regards
> >> Thomas
> >>
> >>>
> >>> Please push these to drm-misc-next-fixes so they get backported as quickly
> >>> as possible.
> >>> -Daniel
> >>>
> >>>> ---
> >>>> drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
> >>>> drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
> >>>> 2 files changed, 38 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
> >>>> index 397f8b0a9af8..d43951caeea0 100644
> >>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
> >>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
> >>>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
> >>>> static struct drm_driver driver;
> >>>>
> >>>> static const struct pci_device_id pciidlist[] = {
> >>>> +  { PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
> >>>> +          G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
> >
> >
> >
> > I will have an additional list of vendor IDs (0x4852)  I will provide in a follow up patch shortly .  This fixes only 1 flavor  of server.
>
> Thank you for all the testing you do. We can add these ids as necessary.
>
> Before, I posted a patch at [1] that prints an internal unique id. The
> id of your original test machine was 0x2 IIRC.
>
> My guess is that the problem might be related to the chip's revision. If
> you have the option of booting your own kernels on all these machines,
> could you apply the patch and look for a pattern in these ids? Maybe
> only revision 0x2 is affected.
>

I've got an old bug I never got around to that has a comment from Matrox

"The issue is reproducible with G200e chip. The device ID is 0x0522."

so it might be a broader problem than we think.

Dave.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Thomas Zimmermann]

[-- Attachment #1.1.1: Type: text/plain, Size: 4270 bytes --]

Hi

Am 04.12.19 um 10:36 schrieb Dave Airlie:
> On Wed, 4 Dec 2019 at 17:30, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>
>> Hi John
>>
>> Am 03.12.19 um 18:55 schrieb John Donnelly:
>>> Hi ,
>>>
>>> See below ,
>>>
>>>
>>>> On Nov 26, 2019, at 3:50 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>>>
>>>> Hi
>>>>
>>>> Am 26.11.19 um 10:37 schrieb Daniel Vetter:
>>>>> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
>>>>>> There's at least one system that does not interpret the value of
>>>>>> the device's 'startadd' field correctly, which leads to incorrectly
>>>>>> displayed scanout buffers. Always placing the active scanout buffer
>>>>>> at offset 0 works around the problem.
>>>>>>
>>>>>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>>>>>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
>>>>>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
>>>>>
>>>>> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
>>>>>
>>>>> (Not quite this patch, but pretty much the logic, so counts).
>>>>>
>>>>> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
>>>>> Cc: <stable@vger.kernel.org> # v5.3+
>>>>>
>>>>> Also you need the stable line on both prep patches too. For next time
>>>>> around,
>>>>>
>>>>> $ dim fixes 81da87f63a1e
>>>>>
>>>>> will generate all the stuff you need, including a good set of suggested
>>>>> Cc: you should have.
>>>>>
>>>>> On the first 3 patches, with all that stuff added:
>>>>>
>>>>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>>>>
>>>> Thanks for the review.
>>>>
>>>> Sorry for leaving out some of the tags. I wanted to wait for feedback
>>>> before adding tested-by, fixes, stable. I'll split off patch 4 from the
>>>> series and get 1 to 3 merged ASAP.
>>>>
>>>> Best regards
>>>> Thomas
>>>>
>>>>>
>>>>> Please push these to drm-misc-next-fixes so they get backported as quickly
>>>>> as possible.
>>>>> -Daniel
>>>>>
>>>>>> ---
>>>>>> drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
>>>>>> drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
>>>>>> 2 files changed, 38 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>>>> index 397f8b0a9af8..d43951caeea0 100644
>>>>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>>>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
>>>>>> static struct drm_driver driver;
>>>>>>
>>>>>> static const struct pci_device_id pciidlist[] = {
>>>>>> +  { PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
>>>>>> +          G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
>>>
>>>
>>>
>>> I will have an additional list of vendor IDs (0x4852)  I will provide in a follow up patch shortly .  This fixes only 1 flavor  of server.
>>
>> Thank you for all the testing you do. We can add these ids as necessary.
>>
>> Before, I posted a patch at [1] that prints an internal unique id. The
>> id of your original test machine was 0x2 IIRC.
>>
>> My guess is that the problem might be related to the chip's revision. If
>> you have the option of booting your own kernels on all these machines,
>> could you apply the patch and look for a pattern in these ids? Maybe
>> only revision 0x2 is affected.
>>
> 
> I've got an old bug I never got around to that has a comment from Matrox
> 
> "The issue is reproducible with G200e chip. The device ID is 0x0522."
> 
> so it might be a broader problem than we think.

Did they tell you a subvendor id? John reported that the internal
revision id differs among affected machines. I'm thinking about flagging
either Sun devices or all 0x0522 devices as broken.

Best regards
Thomas

> 
> Dave.
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[David Airlie]

On Fri, Dec 6, 2019 at 4:14 PM Thomas Zimmermann <tzimmermann@suse.de> wrote:
>
> Hi
>
> Am 04.12.19 um 10:36 schrieb Dave Airlie:
> > On Wed, 4 Dec 2019 at 17:30, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> >>
> >> Hi John
> >>
> >> Am 03.12.19 um 18:55 schrieb John Donnelly:
> >>> Hi ,
> >>>
> >>> See below ,
> >>>
> >>>
> >>>> On Nov 26, 2019, at 3:50 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
> >>>>
> >>>> Hi
> >>>>
> >>>> Am 26.11.19 um 10:37 schrieb Daniel Vetter:
> >>>>> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
> >>>>>> There's at least one system that does not interpret the value of
> >>>>>> the device's 'startadd' field correctly, which leads to incorrectly
> >>>>>> displayed scanout buffers. Always placing the active scanout buffer
> >>>>>> at offset 0 works around the problem.
> >>>>>>
> >>>>>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> >>>>>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
> >>>>>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
> >>>>>
> >>>>> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
> >>>>>
> >>>>> (Not quite this patch, but pretty much the logic, so counts).
> >>>>>
> >>>>> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
> >>>>> Cc: <stable@vger.kernel.org> # v5.3+
> >>>>>
> >>>>> Also you need the stable line on both prep patches too. For next time
> >>>>> around,
> >>>>>
> >>>>> $ dim fixes 81da87f63a1e
> >>>>>
> >>>>> will generate all the stuff you need, including a good set of suggested
> >>>>> Cc: you should have.
> >>>>>
> >>>>> On the first 3 patches, with all that stuff added:
> >>>>>
> >>>>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> >>>>
> >>>> Thanks for the review.
> >>>>
> >>>> Sorry for leaving out some of the tags. I wanted to wait for feedback
> >>>> before adding tested-by, fixes, stable. I'll split off patch 4 from the
> >>>> series and get 1 to 3 merged ASAP.
> >>>>
> >>>> Best regards
> >>>> Thomas
> >>>>
> >>>>>
> >>>>> Please push these to drm-misc-next-fixes so they get backported as quickly
> >>>>> as possible.
> >>>>> -Daniel
> >>>>>
> >>>>>> ---
> >>>>>> drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
> >>>>>> drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
> >>>>>> 2 files changed, 38 insertions(+), 1 deletion(-)
> >>>>>>
> >>>>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
> >>>>>> index 397f8b0a9af8..d43951caeea0 100644
> >>>>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
> >>>>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
> >>>>>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
> >>>>>> static struct drm_driver driver;
> >>>>>>
> >>>>>> static const struct pci_device_id pciidlist[] = {
> >>>>>> +  { PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
> >>>>>> +          G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
> >>>
> >>>
> >>>
> >>> I will have an additional list of vendor IDs (0x4852)  I will provide in a follow up patch shortly .  This fixes only 1 flavor  of server.
> >>
> >> Thank you for all the testing you do. We can add these ids as necessary.
> >>
> >> Before, I posted a patch at [1] that prints an internal unique id. The
> >> id of your original test machine was 0x2 IIRC.
> >>
> >> My guess is that the problem might be related to the chip's revision. If
> >> you have the option of booting your own kernels on all these machines,
> >> could you apply the patch and look for a pattern in these ids? Maybe
> >> only revision 0x2 is affected.
> >>
> >
> > I've got an old bug I never got around to that has a comment from Matrox
> >
> > "The issue is reproducible with G200e chip. The device ID is 0x0522."
> >
> > so it might be a broader problem than we think.
>
> Did they tell you a subvendor id? John reported that the internal
> revision id differs among affected machines. I'm thinking about flagging
> either Sun devices or all 0x0522 devices as broken.

Well it was from Matrox themselves, so they are the vendor ID, it
didn't sounds like subvendor mattered, though I expect the problem is
the BMC firmware anyways, not sure if we can even know what ths is.

Dave.

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/4] drm/mgag200: Add workaround for HW that does not support 'startadd'

[Thomas Zimmermann]

[-- Attachment #1.1.1: Type: text/plain, Size: 4895 bytes --]

Hi

Am 06.12.19 um 07:50 schrieb David Airlie:
> On Fri, Dec 6, 2019 at 4:14 PM Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>
>> Hi
>>
>> Am 04.12.19 um 10:36 schrieb Dave Airlie:
>>> On Wed, 4 Dec 2019 at 17:30, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>>>
>>>> Hi John
>>>>
>>>> Am 03.12.19 um 18:55 schrieb John Donnelly:
>>>>> Hi ,
>>>>>
>>>>> See below ,
>>>>>
>>>>>
>>>>>> On Nov 26, 2019, at 3:50 AM, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>>>>>
>>>>>> Hi
>>>>>>
>>>>>> Am 26.11.19 um 10:37 schrieb Daniel Vetter:
>>>>>>> On Tue, Nov 26, 2019 at 08:25:44AM +0100, Thomas Zimmermann wrote:
>>>>>>>> There's at least one system that does not interpret the value of
>>>>>>>> the device's 'startadd' field correctly, which leads to incorrectly
>>>>>>>> displayed scanout buffers. Always placing the active scanout buffer
>>>>>>>> at offset 0 works around the problem.
>>>>>>>>
>>>>>>>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>>>>>>>> Reported-by: John Donnelly <john.p.donnelly@oracle.com>
>>>>>>>> Link: https://gitlab.freedesktop.org/drm/misc/issues/7
>>>>>>>
>>>>>>> Tested-by: John Donnelly <john.p.donnelly@oracle.com>
>>>>>>>
>>>>>>> (Not quite this patch, but pretty much the logic, so counts).
>>>>>>>
>>>>>>> Fixes: 81da87f63a1e ("drm: Replace drm_gem_vram_push_to_system() with kunmap + unpin")
>>>>>>> Cc: <stable@vger.kernel.org> # v5.3+
>>>>>>>
>>>>>>> Also you need the stable line on both prep patches too. For next time
>>>>>>> around,
>>>>>>>
>>>>>>> $ dim fixes 81da87f63a1e
>>>>>>>
>>>>>>> will generate all the stuff you need, including a good set of suggested
>>>>>>> Cc: you should have.
>>>>>>>
>>>>>>> On the first 3 patches, with all that stuff added:
>>>>>>>
>>>>>>> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>>>>>>
>>>>>> Thanks for the review.
>>>>>>
>>>>>> Sorry for leaving out some of the tags. I wanted to wait for feedback
>>>>>> before adding tested-by, fixes, stable. I'll split off patch 4 from the
>>>>>> series and get 1 to 3 merged ASAP.
>>>>>>
>>>>>> Best regards
>>>>>> Thomas
>>>>>>
>>>>>>>
>>>>>>> Please push these to drm-misc-next-fixes so they get backported as quickly
>>>>>>> as possible.
>>>>>>> -Daniel
>>>>>>>
>>>>>>>> ---
>>>>>>>> drivers/gpu/drm/mgag200/mgag200_drv.c | 36 ++++++++++++++++++++++++++-
>>>>>>>> drivers/gpu/drm/mgag200/mgag200_drv.h |  3 +++
>>>>>>>> 2 files changed, 38 insertions(+), 1 deletion(-)
>>>>>>>>
>>>>>>>> diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>>>>>> index 397f8b0a9af8..d43951caeea0 100644
>>>>>>>> --- a/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>>>>>> +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c
>>>>>>>> @@ -30,6 +30,8 @@ module_param_named(modeset, mgag200_modeset, int, 0400);
>>>>>>>> static struct drm_driver driver;
>>>>>>>>
>>>>>>>> static const struct pci_device_id pciidlist[] = {
>>>>>>>> +  { PCI_VENDOR_ID_MATROX, 0x522, PCI_VENDOR_ID_SUN, 0x4852, 0, 0,
>>>>>>>> +          G200_SE_A | MGAG200_FLAG_HW_BUG_NO_STARTADD},
>>>>>
>>>>>
>>>>>
>>>>> I will have an additional list of vendor IDs (0x4852)  I will provide in a follow up patch shortly .  This fixes only 1 flavor  of server.
>>>>
>>>> Thank you for all the testing you do. We can add these ids as necessary.
>>>>
>>>> Before, I posted a patch at [1] that prints an internal unique id. The
>>>> id of your original test machine was 0x2 IIRC.
>>>>
>>>> My guess is that the problem might be related to the chip's revision. If
>>>> you have the option of booting your own kernels on all these machines,
>>>> could you apply the patch and look for a pattern in these ids? Maybe
>>>> only revision 0x2 is affected.
>>>>
>>>
>>> I've got an old bug I never got around to that has a comment from Matrox
>>>
>>> "The issue is reproducible with G200e chip. The device ID is 0x0522."
>>>
>>> so it might be a broader problem than we think.
>>
>> Did they tell you a subvendor id? John reported that the internal
>> revision id differs among affected machines. I'm thinking about flagging
>> either Sun devices or all 0x0522 devices as broken.
> 
> Well it was from Matrox themselves, so they are the vendor ID, it
> didn't sounds like subvendor mattered, though I expect the problem is
> the BMC firmware anyways, not sure if we can even know what ths is.

OK, thanks. I'll prepare a patch to flag all 0x0522 machines.

Best regards
Thomas

> 
> Dave.
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 

-- 
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel