* [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A @ 2021-06-23 0:54 ainux.wang 2021-06-24 13:17 ` Guenter Roeck 0 siblings, 1 reply; 7+ messages in thread From: ainux.wang @ 2021-06-23 0:54 UTC (permalink / raw) To: jdelvare, linux, corbet, ainux.wang Cc: linux-hwmon, linux-doc, sterlingteng, chenhuacai, chenhuacai From: "Ainux.Wang" <ainux.wang@gmail.com> Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). This is a triple-loop, digital, multi-phase controller. This device: - Supports up to three power rail. - Provides 6 pulse-width modulations (PWMs), and can be configured up to 6-phase operation for Rail A , up to 2-phase operation for Rail B and up to 1-phase operation for Rail C. - The PMBus registers are distributed into three pages: Page 0, Page 1, Page 2. Page 0 contains the registers for Rail A and most of the common settings for all of the rails. Page 1 contains register information for Rail B. Page 2 contains register information for Rail C. - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and IMVP9. Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> --- v5: - Moved change log to right here. v4: - Removed mp2949a_read_byte_data(). - Added space before and after '-' and fixed a bug that is '~' on line 35. v3: - Added change log here. - Errors in the document have been modified. - Fixed PMBUS_VOUT_MODE to MP2949A_MFR_VR_CONFIG. - Removed unnecessary vout_params and empty line. v2: - Reference has been added to Documentation/hwmon/index.rst. - Droped 'vendor'. - Removed change codes of the PMBus core and added mp2949a_identify() and mp2949a_read_byte_data() to this driver. v1: - Add support for MPS MP2949A. Documentation/hwmon/index.rst | 1 + Documentation/hwmon/mp2949a.rst | 44 ++++++++++++++ drivers/hwmon/pmbus/Kconfig | 9 +++ drivers/hwmon/pmbus/Makefile | 1 + drivers/hwmon/pmbus/mp2949a.c | 102 ++++++++++++++++++++++++++++++++ 5 files changed, 157 insertions(+) create mode 100644 Documentation/hwmon/mp2949a.rst create mode 100644 drivers/hwmon/pmbus/mp2949a.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 9ed60fa84cbe..56aac3b1678d 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -137,6 +137,7 @@ Hardware Monitoring Kernel Drivers mcp3021 menf21bmc mlxreg-fan + mp2949a mp2975 nct6683 nct6775 diff --git a/Documentation/hwmon/mp2949a.rst b/Documentation/hwmon/mp2949a.rst new file mode 100644 index 000000000000..0235dec70f63 --- /dev/null +++ b/Documentation/hwmon/mp2949a.rst @@ -0,0 +1,44 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2949a +==================== + +Supported chips: + + * MPS MP2949A + + Prefix: 'mp2949a' + +Author: + + Ainux Wang <ainux.wang@gmail.com> + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +triple-loop, digital, multi-phase controller MP2949A. + +This device: + +- Supports up to three power rails. +- Provides 6 pulse-width modulations (PWMs), and can be configured for + to 6-phase operation for Rail A , up to 2-phase operation for Rail B, + and up to 1-phase operation for Rail C. +- The PMBus registers are distributed into three pages: Page 0, Page 1, + Page 2. Page 0 contains the registers for Rail A and most of the common + settings for all of the rails. Page 1 contains register information for + Rail B. Page 2 contains register information for Rail C. +- The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and + IMVP9. + +Device supports: + +- SVID interface. +- PMBus rev 1.2 interface. + +Device supports direct format for reading output power. +Device supports linear format for reading input voltage, output current, +and temperature. +Device supports VID for reading output voltage. +The below VID modes are supported: VR12, VR13, IMVP8, IMVP9. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 37a5c39784fa..b1344b265976 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -248,6 +248,15 @@ config SENSORS_MAX8688 This driver can also be built as a module. If so, the module will be called max8688. +config SENSORS_MP2949A + tristate "MPS MP2949A" + help + If you say yes here you get hardware monitoring support for MPS + MP2949A Triple Loop Digital Multi-Phase Controller. + + This driver can also be built as a module. If so, the module will + be called mp2949a. + config SENSORS_MP2975 tristate "MPS MP2975" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index f8dcc27cd56a..bfb55ab12da1 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o obj-$(CONFIG_SENSORS_MAX31785) += max31785.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o +obj-$(CONFIG_SENSORS_MP2949A) += mp2949a.o obj-$(CONFIG_SENSORS_MP2975) += mp2975.o obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o diff --git a/drivers/hwmon/pmbus/mp2949a.c b/drivers/hwmon/pmbus/mp2949a.c new file mode 100644 index 000000000000..d1f36c008e58 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2949a.c @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for Monolithic Power Systems MP2949A + * + * Copyright (c) 2021 Lemote Technologies. All rights reserved. + * Copyright (c) 2021 Ainux <ainux.wang@gmail.com> + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include "pmbus.h" + +#define MP2949A_PAGE_NUM 3 + +#define MP2949A_MFR_VR_CONFIG 0xE4 + +static int mp2949a_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int i, ret; + + for (i = 0; i < MP2949A_PAGE_NUM; i++) { + ret = pmbus_read_byte_data(client, i, MP2949A_MFR_VR_CONFIG); + if (ret < 0) + return ret; + + /* + * Rail A bit 5, Rail B bit 4, Rail C bit 3. + * 1'b1: 5mV (vr12/imvp8) + * 1'b0: 10mv (imvp9) + */ + info->vrm_version[i] = (ret & BIT(5 - i)) ? vr12 : imvp9; + } + + return 0; +} + +static struct pmbus_driver_info mp2949a_info = { + .pages = MP2949A_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = vid, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_POWER] = direct, + .m[PSC_POWER] = 1, + .b[PSC_POWER] = 0, + .R[PSC_POWER] = 0, + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT, + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_POUT, + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | + PMBUS_HAVE_POUT, + .identify = mp2949a_identify, +}; + +static int mp2949a_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pmbus_driver_info *info; + + info = devm_kmemdup(&client->dev, &mp2949a_info, sizeof(*info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + return pmbus_do_probe(client, info); +} + +static const struct i2c_device_id mp2949a_id[] = { + {"mp2949a", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, mp2949a_id); + +static const struct of_device_id mp2949a_of_match[] = { + {.compatible = "mps,mp2949a"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2949a_of_match); + +static struct i2c_driver mp2949a_driver = { + .driver = { + .name = "mp2949a", + .of_match_table = of_match_ptr(mp2949a_of_match), + }, + .probe = mp2949a_probe, + .id_table = mp2949a_id, +}; + +module_i2c_driver(mp2949a_driver); + +MODULE_AUTHOR("Ainux <ainux.wang@gmail.com>"); +MODULE_DESCRIPTION("PMBus driver for Monolithic Power Systems MP2949A"); +MODULE_LICENSE("GPL"); -- 2.18.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A 2021-06-23 0:54 [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A ainux.wang @ 2021-06-24 13:17 ` Guenter Roeck 2021-06-28 13:38 ` Guenter Roeck 2021-06-29 1:26 ` Ainux Wang 0 siblings, 2 replies; 7+ messages in thread From: Guenter Roeck @ 2021-06-24 13:17 UTC (permalink / raw) To: ainux.wang Cc: jdelvare, corbet, linux-hwmon, linux-doc, sterlingteng, chenhuacai, chenhuacai On Wed, Jun 23, 2021 at 08:54:26AM +0800, ainux.wang@gmail.com wrote: > From: "Ainux.Wang" <ainux.wang@gmail.com> > > Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). > This is a triple-loop, digital, multi-phase controller. > This device: > - Supports up to three power rail. > - Provides 6 pulse-width modulations (PWMs), and can be configured up > to 6-phase operation for Rail A , up to 2-phase operation for Rail B > and up to 1-phase operation for Rail C. > - The PMBus registers are distributed into three pages: Page 0, Page 1, > Page 2. Page 0 contains the registers for Rail A and most of the common > settings for all of the rails. Page 1 contains register information for > Rail B. Page 2 contains register information for Rail C. > - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and > IMVP9. > > Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> > --- > v5: > - Moved change log to right here. > v4: > - Removed mp2949a_read_byte_data(). Your other question left me confused. I had previously asked to provide a rationale for filtering out the PMBUS_VOUT_MODE command, and I had stated that "the chip does not support it" is not a valid reason. However, "the chip does not support it but does not report an error when reading it" _is_ a valid reason. So what happens when the PMBus core reads PMBUS_VOUT_MODE ? Does the chip return an error, or some random data ? Thanks, Guenter > - Added space before and after '-' and fixed a bug that is '~' on line 35. > > v3: > - Added change log here. > - Errors in the document have been modified. > - Fixed PMBUS_VOUT_MODE to MP2949A_MFR_VR_CONFIG. > - Removed unnecessary vout_params and empty line. > > v2: > - Reference has been added to Documentation/hwmon/index.rst. > - Droped 'vendor'. > - Removed change codes of the PMBus core and added mp2949a_identify() > and mp2949a_read_byte_data() to this driver. > > v1: > - Add support for MPS MP2949A. > Documentation/hwmon/index.rst | 1 + > Documentation/hwmon/mp2949a.rst | 44 ++++++++++++++ > drivers/hwmon/pmbus/Kconfig | 9 +++ > drivers/hwmon/pmbus/Makefile | 1 + > drivers/hwmon/pmbus/mp2949a.c | 102 ++++++++++++++++++++++++++++++++ > 5 files changed, 157 insertions(+) > create mode 100644 Documentation/hwmon/mp2949a.rst > create mode 100644 drivers/hwmon/pmbus/mp2949a.c > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > index 9ed60fa84cbe..56aac3b1678d 100644 > --- a/Documentation/hwmon/index.rst > +++ b/Documentation/hwmon/index.rst > @@ -137,6 +137,7 @@ Hardware Monitoring Kernel Drivers > mcp3021 > menf21bmc > mlxreg-fan > + mp2949a > mp2975 > nct6683 > nct6775 > diff --git a/Documentation/hwmon/mp2949a.rst b/Documentation/hwmon/mp2949a.rst > new file mode 100644 > index 000000000000..0235dec70f63 > --- /dev/null > +++ b/Documentation/hwmon/mp2949a.rst > @@ -0,0 +1,44 @@ > +.. SPDX-License-Identifier: GPL-2.0 > + > +Kernel driver mp2949a > +==================== > + > +Supported chips: > + > + * MPS MP2949A > + > + Prefix: 'mp2949a' > + > +Author: > + > + Ainux Wang <ainux.wang@gmail.com> > + > +Description > +----------- > + > +This driver implements support for Monolithic Power Systems, Inc. (MPS) > +triple-loop, digital, multi-phase controller MP2949A. > + > +This device: > + > +- Supports up to three power rails. > +- Provides 6 pulse-width modulations (PWMs), and can be configured for > + to 6-phase operation for Rail A , up to 2-phase operation for Rail B, > + and up to 1-phase operation for Rail C. > +- The PMBus registers are distributed into three pages: Page 0, Page 1, > + Page 2. Page 0 contains the registers for Rail A and most of the common > + settings for all of the rails. Page 1 contains register information for > + Rail B. Page 2 contains register information for Rail C. > +- The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and > + IMVP9. > + > +Device supports: > + > +- SVID interface. > +- PMBus rev 1.2 interface. > + > +Device supports direct format for reading output power. > +Device supports linear format for reading input voltage, output current, > +and temperature. > +Device supports VID for reading output voltage. > +The below VID modes are supported: VR12, VR13, IMVP8, IMVP9. > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > index 37a5c39784fa..b1344b265976 100644 > --- a/drivers/hwmon/pmbus/Kconfig > +++ b/drivers/hwmon/pmbus/Kconfig > @@ -248,6 +248,15 @@ config SENSORS_MAX8688 > This driver can also be built as a module. If so, the module will > be called max8688. > > +config SENSORS_MP2949A > + tristate "MPS MP2949A" > + help > + If you say yes here you get hardware monitoring support for MPS > + MP2949A Triple Loop Digital Multi-Phase Controller. > + > + This driver can also be built as a module. If so, the module will > + be called mp2949a. > + > config SENSORS_MP2975 > tristate "MPS MP2975" > help > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile > index f8dcc27cd56a..bfb55ab12da1 100644 > --- a/drivers/hwmon/pmbus/Makefile > +++ b/drivers/hwmon/pmbus/Makefile > @@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o > obj-$(CONFIG_SENSORS_MAX31785) += max31785.o > obj-$(CONFIG_SENSORS_MAX34440) += max34440.o > obj-$(CONFIG_SENSORS_MAX8688) += max8688.o > +obj-$(CONFIG_SENSORS_MP2949A) += mp2949a.o > obj-$(CONFIG_SENSORS_MP2975) += mp2975.o > obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o > obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o > diff --git a/drivers/hwmon/pmbus/mp2949a.c b/drivers/hwmon/pmbus/mp2949a.c > new file mode 100644 > index 000000000000..d1f36c008e58 > --- /dev/null > +++ b/drivers/hwmon/pmbus/mp2949a.c > @@ -0,0 +1,102 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Hardware monitoring driver for Monolithic Power Systems MP2949A > + * > + * Copyright (c) 2021 Lemote Technologies. All rights reserved. > + * Copyright (c) 2021 Ainux <ainux.wang@gmail.com> > + */ > + > +#include <linux/err.h> > +#include <linux/i2c.h> > +#include <linux/init.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include "pmbus.h" > + > +#define MP2949A_PAGE_NUM 3 > + > +#define MP2949A_MFR_VR_CONFIG 0xE4 > + > +static int mp2949a_identify(struct i2c_client *client, > + struct pmbus_driver_info *info) > +{ > + int i, ret; > + > + for (i = 0; i < MP2949A_PAGE_NUM; i++) { > + ret = pmbus_read_byte_data(client, i, MP2949A_MFR_VR_CONFIG); > + if (ret < 0) > + return ret; > + > + /* > + * Rail A bit 5, Rail B bit 4, Rail C bit 3. > + * 1'b1: 5mV (vr12/imvp8) > + * 1'b0: 10mv (imvp9) > + */ > + info->vrm_version[i] = (ret & BIT(5 - i)) ? vr12 : imvp9; > + } > + > + return 0; > +} > + > +static struct pmbus_driver_info mp2949a_info = { > + .pages = MP2949A_PAGE_NUM, > + .format[PSC_VOLTAGE_IN] = linear, > + .format[PSC_VOLTAGE_OUT] = vid, > + .format[PSC_CURRENT_OUT] = linear, > + .format[PSC_TEMPERATURE] = linear, > + .format[PSC_POWER] = direct, > + .m[PSC_POWER] = 1, > + .b[PSC_POWER] = 0, > + .R[PSC_POWER] = 0, > + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT, > + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > + PMBUS_HAVE_POUT, > + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > + PMBUS_HAVE_POUT, > + .identify = mp2949a_identify, > +}; > + > +static int mp2949a_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct pmbus_driver_info *info; > + > + info = devm_kmemdup(&client->dev, &mp2949a_info, sizeof(*info), > + GFP_KERNEL); > + if (!info) > + return -ENOMEM; > + > + return pmbus_do_probe(client, info); > +} > + > +static const struct i2c_device_id mp2949a_id[] = { > + {"mp2949a", 0}, > + {} > +}; > + > +MODULE_DEVICE_TABLE(i2c, mp2949a_id); > + > +static const struct of_device_id mp2949a_of_match[] = { > + {.compatible = "mps,mp2949a"}, > + {} > +}; > +MODULE_DEVICE_TABLE(of, mp2949a_of_match); > + > +static struct i2c_driver mp2949a_driver = { > + .driver = { > + .name = "mp2949a", > + .of_match_table = of_match_ptr(mp2949a_of_match), > + }, > + .probe = mp2949a_probe, > + .id_table = mp2949a_id, > +}; > + > +module_i2c_driver(mp2949a_driver); > + > +MODULE_AUTHOR("Ainux <ainux.wang@gmail.com>"); > +MODULE_DESCRIPTION("PMBus driver for Monolithic Power Systems MP2949A"); > +MODULE_LICENSE("GPL"); ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A 2021-06-24 13:17 ` Guenter Roeck @ 2021-06-28 13:38 ` Guenter Roeck 2021-06-29 1:28 ` Ainux Wang 2021-06-29 1:26 ` Ainux Wang 1 sibling, 1 reply; 7+ messages in thread From: Guenter Roeck @ 2021-06-28 13:38 UTC (permalink / raw) To: ainux.wang Cc: jdelvare, corbet, linux-hwmon, linux-doc, sterlingteng, chenhuacai, chenhuacai On 6/24/21 6:17 AM, Guenter Roeck wrote: > On Wed, Jun 23, 2021 at 08:54:26AM +0800, ainux.wang@gmail.com wrote: >> From: "Ainux.Wang" <ainux.wang@gmail.com> >> >> Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). >> This is a triple-loop, digital, multi-phase controller. >> This device: >> - Supports up to three power rail. >> - Provides 6 pulse-width modulations (PWMs), and can be configured up >> to 6-phase operation for Rail A , up to 2-phase operation for Rail B >> and up to 1-phase operation for Rail C. >> - The PMBus registers are distributed into three pages: Page 0, Page 1, >> Page 2. Page 0 contains the registers for Rail A and most of the common >> settings for all of the rails. Page 1 contains register information for >> Rail B. Page 2 contains register information for Rail C. >> - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and >> IMVP9. >> >> Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> >> --- >> v5: >> - Moved change log to right here. >> v4: >> - Removed mp2949a_read_byte_data(). > > Your other question left me confused. I had previously asked to provide > a rationale for filtering out the PMBUS_VOUT_MODE command, and I had > stated that "the chip does not support it" is not a valid reason. However, > "the chip does not support it but does not report an error when reading > it" _is_ a valid reason. So what happens when the PMBus core reads > PMBUS_VOUT_MODE ? Does the chip return an error, or some random data ? > Still waiting for a reply. Guenter ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A 2021-06-28 13:38 ` Guenter Roeck @ 2021-06-29 1:28 ` Ainux Wang 0 siblings, 0 replies; 7+ messages in thread From: Ainux Wang @ 2021-06-29 1:28 UTC (permalink / raw) To: Guenter Roeck Cc: jdelvare, Jonathan Corbet, linux-hwmon, linux-doc, teng sterling, Huacai Chen, Huacai Chen On Mon, 28 Jun 2021 at 21:38, Guenter Roeck <linux@roeck-us.net> wrote: > > On 6/24/21 6:17 AM, Guenter Roeck wrote: > > On Wed, Jun 23, 2021 at 08:54:26AM +0800, ainux.wang@gmail.com wrote: > >> From: "Ainux.Wang" <ainux.wang@gmail.com> > >> > >> Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). > >> This is a triple-loop, digital, multi-phase controller. > >> This device: > >> - Supports up to three power rail. > >> - Provides 6 pulse-width modulations (PWMs), and can be configured up > >> to 6-phase operation for Rail A , up to 2-phase operation for Rail B > >> and up to 1-phase operation for Rail C. > >> - The PMBus registers are distributed into three pages: Page 0, Page 1, > >> Page 2. Page 0 contains the registers for Rail A and most of the common > >> settings for all of the rails. Page 1 contains register information for > >> Rail B. Page 2 contains register information for Rail C. > >> - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and > >> IMVP9. > >> > >> Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> > >> --- > >> v5: > >> - Moved change log to right here. > >> v4: > >> - Removed mp2949a_read_byte_data(). > > > > Your other question left me confused. I had previously asked to provide > > a rationale for filtering out the PMBUS_VOUT_MODE command, and I had > > stated that "the chip does not support it" is not a valid reason. However, > > "the chip does not support it but does not report an error when reading > > it" _is_ a valid reason. So what happens when the PMBus core reads > > PMBUS_VOUT_MODE ? Does the chip return an error, or some random data ? > > > > Still waiting for a reply. > > Guenter > Hi, Guenter Sorry to have kept you waiting. Best regards, Ainux Wang. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A 2021-06-24 13:17 ` Guenter Roeck 2021-06-28 13:38 ` Guenter Roeck @ 2021-06-29 1:26 ` Ainux Wang 2021-06-29 2:20 ` Guenter Roeck 1 sibling, 1 reply; 7+ messages in thread From: Ainux Wang @ 2021-06-29 1:26 UTC (permalink / raw) To: Guenter Roeck Cc: jdelvare, Jonathan Corbet, linux-hwmon, linux-doc, teng sterling, Huacai Chen, Huacai Chen On Thu, 24 Jun 2021 at 21:17, Guenter Roeck <linux@roeck-us.net> wrote: > > On Wed, Jun 23, 2021 at 08:54:26AM +0800, ainux.wang@gmail.com wrote: > > From: "Ainux.Wang" <ainux.wang@gmail.com> > > > > Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). > > This is a triple-loop, digital, multi-phase controller. > > This device: > > - Supports up to three power rail. > > - Provides 6 pulse-width modulations (PWMs), and can be configured up > > to 6-phase operation for Rail A , up to 2-phase operation for Rail B > > and up to 1-phase operation for Rail C. > > - The PMBus registers are distributed into three pages: Page 0, Page 1, > > Page 2. Page 0 contains the registers for Rail A and most of the common > > settings for all of the rails. Page 1 contains register information for > > Rail B. Page 2 contains register information for Rail C. > > - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and > > IMVP9. > > > > Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> > > --- > > v5: > > - Moved change log to right here. > > v4: > > - Removed mp2949a_read_byte_data(). > > Your other question left me confused. I had previously asked to provide > a rationale for filtering out the PMBUS_VOUT_MODE command, and I had > stated that "the chip does not support it" is not a valid reason. However, > "the chip does not support it but does not report an error when reading > it" _is_ a valid reason. So what happens when the PMBus core reads > PMBUS_VOUT_MODE ? Does the chip return an error, or some random data ? > > Thanks, > Guenter > Hi, Guenter I have not been clear about the cause of this problem that "the chip does not support it is not a valid reason". However, i have added some "printk", i found the chip will return some random data, when the PMbus core reads PMBUS_STATUS and PMBUS_VOUT_MODE. So, I do not known what should i do, when the PMbus core reads PMBUS_STATUS. and i have knwon that use "This chip do not support the VOUT_MODE command, the chip does not support it but return some random data when reading " instead of " /* * This chip do not support the VOUT_MODE command. * There is not VOUT_MODE command in MP2949A datasheet P29~P31. * So this is EINVAL in here. */ " Now, there is only one question left, what should the PMbus do, the chip return random data, when it reads PMBUS_STATUS by i2c_smbus_read_word_data() or i2c_smbus_read_byte_data()? Can the PMbus core use pmbus_read_status_byte() and pmbus_read_status_word() instead of i2c_smbus_read_byte_data() and i2c_smbus_read_word_data() ? Best regards, Ainux Wang. > > - Added space before and after '-' and fixed a bug that is '~' on line 35. > > > > v3: > > - Added change log here. > > - Errors in the document have been modified. > > - Fixed PMBUS_VOUT_MODE to MP2949A_MFR_VR_CONFIG. > > - Removed unnecessary vout_params and empty line. > > > > v2: > > - Reference has been added to Documentation/hwmon/index.rst. > > - Droped 'vendor'. > > - Removed change codes of the PMBus core and added mp2949a_identify() > > and mp2949a_read_byte_data() to this driver. > > > > v1: > > - Add support for MPS MP2949A. > > Documentation/hwmon/index.rst | 1 + > > Documentation/hwmon/mp2949a.rst | 44 ++++++++++++++ > > drivers/hwmon/pmbus/Kconfig | 9 +++ > > drivers/hwmon/pmbus/Makefile | 1 + > > drivers/hwmon/pmbus/mp2949a.c | 102 ++++++++++++++++++++++++++++++++ > > 5 files changed, 157 insertions(+) > > create mode 100644 Documentation/hwmon/mp2949a.rst > > create mode 100644 drivers/hwmon/pmbus/mp2949a.c > > > > diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst > > index 9ed60fa84cbe..56aac3b1678d 100644 > > --- a/Documentation/hwmon/index.rst > > +++ b/Documentation/hwmon/index.rst > > @@ -137,6 +137,7 @@ Hardware Monitoring Kernel Drivers > > mcp3021 > > menf21bmc > > mlxreg-fan > > + mp2949a > > mp2975 > > nct6683 > > nct6775 > > diff --git a/Documentation/hwmon/mp2949a.rst b/Documentation/hwmon/mp2949a.rst > > new file mode 100644 > > index 000000000000..0235dec70f63 > > --- /dev/null > > +++ b/Documentation/hwmon/mp2949a.rst > > @@ -0,0 +1,44 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +Kernel driver mp2949a > > +==================== > > + > > +Supported chips: > > + > > + * MPS MP2949A > > + > > + Prefix: 'mp2949a' > > + > > +Author: > > + > > + Ainux Wang <ainux.wang@gmail.com> > > + > > +Description > > +----------- > > + > > +This driver implements support for Monolithic Power Systems, Inc. (MPS) > > +triple-loop, digital, multi-phase controller MP2949A. > > + > > +This device: > > + > > +- Supports up to three power rails. > > +- Provides 6 pulse-width modulations (PWMs), and can be configured for > > + to 6-phase operation for Rail A , up to 2-phase operation for Rail B, > > + and up to 1-phase operation for Rail C. > > +- The PMBus registers are distributed into three pages: Page 0, Page 1, > > + Page 2. Page 0 contains the registers for Rail A and most of the common > > + settings for all of the rails. Page 1 contains register information for > > + Rail B. Page 2 contains register information for Rail C. > > +- The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and > > + IMVP9. > > + > > +Device supports: > > + > > +- SVID interface. > > +- PMBus rev 1.2 interface. > > + > > +Device supports direct format for reading output power. > > +Device supports linear format for reading input voltage, output current, > > +and temperature. > > +Device supports VID for reading output voltage. > > +The below VID modes are supported: VR12, VR13, IMVP8, IMVP9. > > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > > index 37a5c39784fa..b1344b265976 100644 > > --- a/drivers/hwmon/pmbus/Kconfig > > +++ b/drivers/hwmon/pmbus/Kconfig > > @@ -248,6 +248,15 @@ config SENSORS_MAX8688 > > This driver can also be built as a module. If so, the module will > > be called max8688. > > > > +config SENSORS_MP2949A > > + tristate "MPS MP2949A" > > + help > > + If you say yes here you get hardware monitoring support for MPS > > + MP2949A Triple Loop Digital Multi-Phase Controller. > > + > > + This driver can also be built as a module. If so, the module will > > + be called mp2949a. > > + > > config SENSORS_MP2975 > > tristate "MPS MP2975" > > help > > diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile > > index f8dcc27cd56a..bfb55ab12da1 100644 > > --- a/drivers/hwmon/pmbus/Makefile > > +++ b/drivers/hwmon/pmbus/Makefile > > @@ -28,6 +28,7 @@ obj-$(CONFIG_SENSORS_MAX20751) += max20751.o > > obj-$(CONFIG_SENSORS_MAX31785) += max31785.o > > obj-$(CONFIG_SENSORS_MAX34440) += max34440.o > > obj-$(CONFIG_SENSORS_MAX8688) += max8688.o > > +obj-$(CONFIG_SENSORS_MP2949A) += mp2949a.o > > obj-$(CONFIG_SENSORS_MP2975) += mp2975.o > > obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o > > obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o > > diff --git a/drivers/hwmon/pmbus/mp2949a.c b/drivers/hwmon/pmbus/mp2949a.c > > new file mode 100644 > > index 000000000000..d1f36c008e58 > > --- /dev/null > > +++ b/drivers/hwmon/pmbus/mp2949a.c > > @@ -0,0 +1,102 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +/* > > + * Hardware monitoring driver for Monolithic Power Systems MP2949A > > + * > > + * Copyright (c) 2021 Lemote Technologies. All rights reserved. > > + * Copyright (c) 2021 Ainux <ainux.wang@gmail.com> > > + */ > > + > > +#include <linux/err.h> > > +#include <linux/i2c.h> > > +#include <linux/init.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include "pmbus.h" > > + > > +#define MP2949A_PAGE_NUM 3 > > + > > +#define MP2949A_MFR_VR_CONFIG 0xE4 > > + > > +static int mp2949a_identify(struct i2c_client *client, > > + struct pmbus_driver_info *info) > > +{ > > + int i, ret; > > + > > + for (i = 0; i < MP2949A_PAGE_NUM; i++) { > > + ret = pmbus_read_byte_data(client, i, MP2949A_MFR_VR_CONFIG); > > + if (ret < 0) > > + return ret; > > + > > + /* > > + * Rail A bit 5, Rail B bit 4, Rail C bit 3. > > + * 1'b1: 5mV (vr12/imvp8) > > + * 1'b0: 10mv (imvp9) > > + */ > > + info->vrm_version[i] = (ret & BIT(5 - i)) ? vr12 : imvp9; > > + } > > + > > + return 0; > > +} > > + > > +static struct pmbus_driver_info mp2949a_info = { > > + .pages = MP2949A_PAGE_NUM, > > + .format[PSC_VOLTAGE_IN] = linear, > > + .format[PSC_VOLTAGE_OUT] = vid, > > + .format[PSC_CURRENT_OUT] = linear, > > + .format[PSC_TEMPERATURE] = linear, > > + .format[PSC_POWER] = direct, > > + .m[PSC_POWER] = 1, > > + .b[PSC_POWER] = 0, > > + .R[PSC_POWER] = 0, > > + .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > > + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > > + PMBUS_HAVE_TEMP | PMBUS_HAVE_POUT, > > + .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > > + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > > + PMBUS_HAVE_POUT, > > + .func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | > > + PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | > > + PMBUS_HAVE_POUT, > > + .identify = mp2949a_identify, > > +}; > > + > > +static int mp2949a_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct pmbus_driver_info *info; > > + > > + info = devm_kmemdup(&client->dev, &mp2949a_info, sizeof(*info), > > + GFP_KERNEL); > > + if (!info) > > + return -ENOMEM; > > + > > + return pmbus_do_probe(client, info); > > +} > > + > > +static const struct i2c_device_id mp2949a_id[] = { > > + {"mp2949a", 0}, > > + {} > > +}; > > + > > +MODULE_DEVICE_TABLE(i2c, mp2949a_id); > > + > > +static const struct of_device_id mp2949a_of_match[] = { > > + {.compatible = "mps,mp2949a"}, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, mp2949a_of_match); > > + > > +static struct i2c_driver mp2949a_driver = { > > + .driver = { > > + .name = "mp2949a", > > + .of_match_table = of_match_ptr(mp2949a_of_match), > > + }, > > + .probe = mp2949a_probe, > > + .id_table = mp2949a_id, > > +}; > > + > > +module_i2c_driver(mp2949a_driver); > > + > > +MODULE_AUTHOR("Ainux <ainux.wang@gmail.com>"); > > +MODULE_DESCRIPTION("PMBus driver for Monolithic Power Systems MP2949A"); > > +MODULE_LICENSE("GPL"); ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A 2021-06-29 1:26 ` Ainux Wang @ 2021-06-29 2:20 ` Guenter Roeck 2021-06-29 2:48 ` Ainux Wang 0 siblings, 1 reply; 7+ messages in thread From: Guenter Roeck @ 2021-06-29 2:20 UTC (permalink / raw) To: Ainux Wang Cc: jdelvare, Jonathan Corbet, linux-hwmon, linux-doc, teng sterling, Huacai Chen, Huacai Chen On 6/28/21 6:26 PM, Ainux Wang wrote: > On Thu, 24 Jun 2021 at 21:17, Guenter Roeck <linux@roeck-us.net> wrote: >> >> On Wed, Jun 23, 2021 at 08:54:26AM +0800, ainux.wang@gmail.com wrote: >>> From: "Ainux.Wang" <ainux.wang@gmail.com> >>> >>> Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). >>> This is a triple-loop, digital, multi-phase controller. >>> This device: >>> - Supports up to three power rail. >>> - Provides 6 pulse-width modulations (PWMs), and can be configured up >>> to 6-phase operation for Rail A , up to 2-phase operation for Rail B >>> and up to 1-phase operation for Rail C. >>> - The PMBus registers are distributed into three pages: Page 0, Page 1, >>> Page 2. Page 0 contains the registers for Rail A and most of the common >>> settings for all of the rails. Page 1 contains register information for >>> Rail B. Page 2 contains register information for Rail C. >>> - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and >>> IMVP9. >>> >>> Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> >>> --- >>> v5: >>> - Moved change log to right here. >>> v4: >>> - Removed mp2949a_read_byte_data(). >> >> Your other question left me confused. I had previously asked to provide >> a rationale for filtering out the PMBUS_VOUT_MODE command, and I had >> stated that "the chip does not support it" is not a valid reason. However, >> "the chip does not support it but does not report an error when reading >> it" _is_ a valid reason. So what happens when the PMBus core reads >> PMBUS_VOUT_MODE ? Does the chip return an error, or some random data ? >> >> Thanks, >> Guenter >> > Hi, Guenter > > I have not been clear about the cause of this problem that > "the chip does not support it is not a valid reason". > > However, i have added some "printk", i found the chip will return some > random data, > when the PMbus core reads PMBUS_STATUS and PMBUS_VOUT_MODE. > > So, I do not known what should i do, when the PMbus core reads PMBUS_STATUS. > and i have knwon that use "This chip do not support the VOUT_MODE command, > the chip does not support it but return some random data when reading > " instead of > " > /* > * This chip do not support the VOUT_MODE command. > * There is not VOUT_MODE command in MP2949A datasheet P29~P31. > * So this is EINVAL in here. > */ > " > Now, there is only one question left, what should the PMbus do, the > chip return random data, > when it reads PMBUS_STATUS by i2c_smbus_read_word_data() or > i2c_smbus_read_byte_data()? > Can the PMbus core use pmbus_read_status_byte() and > pmbus_read_status_word() instead of > i2c_smbus_read_byte_data() and i2c_smbus_read_word_data() ? > The driver should implement a read_byte_data() function and either simulate PMBUS_VOUT_MODE and let it return whatever makes sense for the driver, or have it return -EINVAL. For the status register, handling is a bit more difficult. For this, we will need an introductory patch. That patch needs to change pmbus_init_common() to call pmbus_read_status_word() and pmbus_read_status_byte() instead of i2c_smbus_read_word_data() and i2c_smbus_read_byte_data() (with page set to -1). The driver patch then needs to implement a read_word_data() function and have it simulate the PMBUS_STATUS_WORD command. Or, alternatively, have the read_word_data() function return -EINVAL for PMBUS_STATUS_WORD, and simulate PMBUS_STATUS_BYTE in the read_byte_data callback. Thanks, Guenter ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A 2021-06-29 2:20 ` Guenter Roeck @ 2021-06-29 2:48 ` Ainux Wang 0 siblings, 0 replies; 7+ messages in thread From: Ainux Wang @ 2021-06-29 2:48 UTC (permalink / raw) To: Guenter Roeck Cc: jdelvare, Jonathan Corbet, linux-hwmon, linux-doc, teng sterling, Huacai Chen, Huacai Chen On Tue, 29 Jun 2021 at 10:20, Guenter Roeck <linux@roeck-us.net> wrote: > > On 6/28/21 6:26 PM, Ainux Wang wrote: > > On Thu, 24 Jun 2021 at 21:17, Guenter Roeck <linux@roeck-us.net> wrote: > >> > >> On Wed, Jun 23, 2021 at 08:54:26AM +0800, ainux.wang@gmail.com wrote: > >>> From: "Ainux.Wang" <ainux.wang@gmail.com> > >>> > >>> Add support for MP2949A device from Monolithic Power Systems, Inc. (MPS). > >>> This is a triple-loop, digital, multi-phase controller. > >>> This device: > >>> - Supports up to three power rail. > >>> - Provides 6 pulse-width modulations (PWMs), and can be configured up > >>> to 6-phase operation for Rail A , up to 2-phase operation for Rail B > >>> and up to 1-phase operation for Rail C. > >>> - The PMBus registers are distributed into three pages: Page 0, Page 1, > >>> Page 2. Page 0 contains the registers for Rail A and most of the common > >>> settings for all of the rails. Page 1 contains register information for > >>> Rail B. Page 2 contains register information for Rail C. > >>> - The MP2949A supports both 5mV VID step and 10mv VID step for IMVP8 and > >>> IMVP9. > >>> > >>> Signed-off-by: Ainux.Wang <ainux.wang@gmail.com> > >>> --- > >>> v5: > >>> - Moved change log to right here. > >>> v4: > >>> - Removed mp2949a_read_byte_data(). > >> > >> Your other question left me confused. I had previously asked to provide > >> a rationale for filtering out the PMBUS_VOUT_MODE command, and I had > >> stated that "the chip does not support it" is not a valid reason. However, > >> "the chip does not support it but does not report an error when reading > >> it" _is_ a valid reason. So what happens when the PMBus core reads > >> PMBUS_VOUT_MODE ? Does the chip return an error, or some random data ? > >> > >> Thanks, > >> Guenter > >> > > Hi, Guenter > > > > I have not been clear about the cause of this problem that > > "the chip does not support it is not a valid reason". > > > > However, i have added some "printk", i found the chip will return some > > random data, > > when the PMbus core reads PMBUS_STATUS and PMBUS_VOUT_MODE. > > > > So, I do not known what should i do, when the PMbus core reads PMBUS_STATUS. > > and i have knwon that use "This chip do not support the VOUT_MODE command, > > the chip does not support it but return some random data when reading > > " instead of > > " > > /* > > * This chip do not support the VOUT_MODE command. > > * There is not VOUT_MODE command in MP2949A datasheet P29~P31. > > * So this is EINVAL in here. > > */ > > " > > Now, there is only one question left, what should the PMbus do, the > > chip return random data, > > when it reads PMBUS_STATUS by i2c_smbus_read_word_data() or > > i2c_smbus_read_byte_data()? > > Can the PMbus core use pmbus_read_status_byte() and > > pmbus_read_status_word() instead of > > i2c_smbus_read_byte_data() and i2c_smbus_read_word_data() ? > > > > The driver should implement a read_byte_data() function and either > simulate PMBUS_VOUT_MODE and let it return whatever makes sense for > the driver, or have it return -EINVAL. > > For the status register, handling is a bit more difficult. For this, we will > need an introductory patch. That patch needs to change pmbus_init_common() > to call pmbus_read_status_word() and pmbus_read_status_byte() instead > of i2c_smbus_read_word_data() and i2c_smbus_read_byte_data() (with page set > to -1). > The driver patch then needs to implement a read_word_data() function and > have it simulate the PMBUS_STATUS_WORD command. Or, alternatively, > have the read_word_data() function return -EINVAL for PMBUS_STATUS_WORD, > and simulate PMBUS_STATUS_BYTE in the read_byte_data callback. > > Thanks, > Guenter Hi, Guenter Very nice, that is what i mean, we have the same idea, I am going to revise pmbus_init_common(), pmbus_check_register and so on. Best regards, Ainux Wang. ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-06-29 2:49 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-06-23 0:54 [PATCH v5] hwmon: (pmbus) Add support for MPS MP2949A ainux.wang 2021-06-24 13:17 ` Guenter Roeck 2021-06-28 13:38 ` Guenter Roeck 2021-06-29 1:28 ` Ainux Wang 2021-06-29 1:26 ` Ainux Wang 2021-06-29 2:20 ` Guenter Roeck 2021-06-29 2:48 ` Ainux Wang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.