Re: [PATCH] x86/memcpy: Introduce memcpy_mcsafe_fast

[Dan Williams <dan.j.williams@intel.com>]

[ add Linus because he had comments the last time memcpy_mcsafe() was
reworked  [1] ]

On Fri, Apr 10, 2020 at 11:06 AM Dan Williams <dan.j.williams@intel.com> wrote:
>
> The original memcpy_mcsafe() implementation satisfied two primary
> concerns. It provided a copy routine that avoided known unrecoverable
> scenarios (poison consumption via fast-string instructions / accesses
> across cacheline boundaries), and it provided a fallback to fast plain
> memcpy if the platform did not indicate recovery capability.
>
> However, the platform indication for recovery capability is not
> architectural so it was always going to require an ever growing list of
> opt-in quirks. Also, ongoing hardware improvements to recoverability
> mean that the cross-cacheline-boundary and fast-string poison
> consumption scenarios are no longer concerns on newer platforms. The
> introduction of memcpy_mcsafe_fast(), and resulting reworks, recovers
> performance for these newer CPUs, but without the maintenance burden of
> an opt-in whitelist.
>
> With memcpy_mcsafe_fast() the existing opt-in becomes a blacklist for
> CPUs that benefit from a more careful slower implementation. Every other
> CPU gets a fast, but optionally recoverable implementation.
>
> With this in place memcpy_mcsafe() never falls back to plain memcpy().
> It can be used in any scenario where the caller needs guarantees that
> source or destination access faults / exceptions will be handled.
> Systems without recovery support continue to default to a fast
> implementation while newer systems both default to fast, and support
> recovery, without needing an explicit quirk.
>
> Cc: x86@kernel.org
> Cc: <stable@vger.kernel.org>
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: "H. Peter Anvin" <hpa@zytor.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Acked-by: Tony Luck <tony.luck@intel.com>
> Reported-by: Erwin Tsaur <erwin.tsaur@intel.com>
> Tested-by: Erwin Tsaur <erwin.tsaur@intel.com>
> Fixes: 92b0729c34ca ("x86/mm, x86/mce: Add memcpy_mcsafe()")
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> ---
> Note that I marked this for stable and included a Fixes tag because it
> is arguably a regression that old kernels stop recovering from poison
> consumption on new hardware.

This still applies cleanly to tip/master as of yesterday. Any concerns?

[1]: https://lore.kernel.org/lkml/CA+55aFwJ=DvvcrM725KOYAF_c=uKiQcuHz4taPjbKveOVPycKA@mail.gmail.com/

>
>  arch/x86/include/asm/string_64.h         |   24 ++++++-------
>  arch/x86/include/asm/uaccess_64.h        |    7 +---
>  arch/x86/kernel/cpu/mce/core.c           |    6 ++-
>  arch/x86/kernel/quirks.c                 |    4 +-
>  arch/x86/lib/memcpy_64.S                 |   57 +++++++++++++++++++++++++++---
>  arch/x86/lib/usercopy_64.c               |    6 +--
>  tools/objtool/check.c                    |    3 +-
>  tools/perf/bench/mem-memcpy-x86-64-lib.c |    8 +---
>  tools/testing/nvdimm/test/nfit.c         |    2 +
>  9 files changed, 75 insertions(+), 42 deletions(-)
>
> diff --git a/arch/x86/include/asm/string_64.h b/arch/x86/include/asm/string_64.h
> index 75314c3dbe47..07840fa3582a 100644
> --- a/arch/x86/include/asm/string_64.h
> +++ b/arch/x86/include/asm/string_64.h
> @@ -83,21 +83,23 @@ int strcmp(const char *cs, const char *ct);
>  #endif
>
>  #define __HAVE_ARCH_MEMCPY_MCSAFE 1
> -__must_check unsigned long __memcpy_mcsafe(void *dst, const void *src,
> +__must_check unsigned long memcpy_mcsafe_slow(void *dst, const void *src,
>                 size_t cnt);
> -DECLARE_STATIC_KEY_FALSE(mcsafe_key);
> +__must_check unsigned long memcpy_mcsafe_fast(void *dst, const void *src,
> +               size_t cnt);
> +DECLARE_STATIC_KEY_FALSE(mcsafe_slow_key);
>
>  /**
> - * memcpy_mcsafe - copy memory with indication if a machine check happened
> + * memcpy_mcsafe - copy memory with indication if an exception / fault happened
>   *
>   * @dst:       destination address
>   * @src:       source address
>   * @cnt:       number of bytes to copy
>   *
> - * Low level memory copy function that catches machine checks
> - * We only call into the "safe" function on systems that can
> - * actually do machine check recovery. Everyone else can just
> - * use memcpy().
> + * The slow version is opted into by platform quirks. The fast version
> + * is equivalent to memcpy() regardless of CPU machine-check-recovery
> + * capability, but may still fall back to the slow version if the CPU
> + * lacks fast-string instruction support.
>   *
>   * Return 0 for success, or number of bytes not copied if there was an
>   * exception.
> @@ -106,12 +108,10 @@ static __always_inline __must_check unsigned long
>  memcpy_mcsafe(void *dst, const void *src, size_t cnt)
>  {
>  #ifdef CONFIG_X86_MCE
> -       if (static_branch_unlikely(&mcsafe_key))
> -               return __memcpy_mcsafe(dst, src, cnt);
> -       else
> +       if (static_branch_unlikely(&mcsafe_slow_key))
> +               return memcpy_mcsafe_slow(dst, src, cnt);
>  #endif
> -               memcpy(dst, src, cnt);
> -       return 0;
> +       return memcpy_mcsafe_fast(dst, src, cnt);
>  }
>
>  #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
> diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
> index 5cd1caa8bc65..f8c0d38c3f45 100644
> --- a/arch/x86/include/asm/uaccess_64.h
> +++ b/arch/x86/include/asm/uaccess_64.h
> @@ -52,12 +52,7 @@ copy_to_user_mcsafe(void *to, const void *from, unsigned len)
>         unsigned long ret;
>
>         __uaccess_begin();
> -       /*
> -        * Note, __memcpy_mcsafe() is explicitly used since it can
> -        * handle exceptions / faults.  memcpy_mcsafe() may fall back to
> -        * memcpy() which lacks this handling.
> -        */
> -       ret = __memcpy_mcsafe(to, from, len);
> +       ret = memcpy_mcsafe(to, from, len);
>         __uaccess_end();
>         return ret;
>  }
> diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
> index 2c4f949611e4..6bf94d39dc7f 100644
> --- a/arch/x86/kernel/cpu/mce/core.c
> +++ b/arch/x86/kernel/cpu/mce/core.c
> @@ -2579,13 +2579,13 @@ static void __init mcheck_debugfs_init(void)
>  static void __init mcheck_debugfs_init(void) { }
>  #endif
>
> -DEFINE_STATIC_KEY_FALSE(mcsafe_key);
> -EXPORT_SYMBOL_GPL(mcsafe_key);
> +DEFINE_STATIC_KEY_FALSE(mcsafe_slow_key);
> +EXPORT_SYMBOL_GPL(mcsafe_slow_key);
>
>  static int __init mcheck_late_init(void)
>  {
>         if (mca_cfg.recovery)
> -               static_branch_inc(&mcsafe_key);
> +               static_branch_inc(&mcsafe_slow_key);
>
>         mcheck_debugfs_init();
>         cec_init();
> diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
> index 896d74cb5081..89c88d9de5c4 100644
> --- a/arch/x86/kernel/quirks.c
> +++ b/arch/x86/kernel/quirks.c
> @@ -636,7 +636,7 @@ static void quirk_intel_brickland_xeon_ras_cap(struct pci_dev *pdev)
>         pci_read_config_dword(pdev, 0x84, &capid0);
>
>         if (capid0 & 0x10)
> -               static_branch_inc(&mcsafe_key);
> +               static_branch_inc(&mcsafe_slow_key);
>  }
>
>  /* Skylake */
> @@ -653,7 +653,7 @@ static void quirk_intel_purley_xeon_ras_cap(struct pci_dev *pdev)
>          * enabled, so memory machine check recovery is also enabled.
>          */
>         if ((capid0 & 0xc0) == 0xc0 || (capid5 & 0x1e0))
> -               static_branch_inc(&mcsafe_key);
> +               static_branch_inc(&mcsafe_slow_key);
>
>  }
>  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x0ec3, quirk_intel_brickland_xeon_ras_cap);
> diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
> index 56b243b14c3a..b5e4fc1cf99d 100644
> --- a/arch/x86/lib/memcpy_64.S
> +++ b/arch/x86/lib/memcpy_64.S
> @@ -189,11 +189,18 @@ SYM_FUNC_END(memcpy_orig)
>  MCSAFE_TEST_CTL
>
>  /*
> - * __memcpy_mcsafe - memory copy with machine check exception handling
> - * Note that we only catch machine checks when reading the source addresses.
> - * Writes to target are posted and don't generate machine checks.
> + * memcpy_mcsafe_slow() - memory copy with exception handling
> + *
> + * In contrast to memcpy_mcsafe_fast() this version is careful to
> + * never perform a read across a cacheline boundary, and not use
> + * fast-string instruction sequences which are known to be unrecoverable
> + * on CPUs identified by mcsafe_slow_key.
> + *
> + * Note that this only catches machine check exceptions when reading the
> + * source addresses.  Writes to target are posted and don't generate
> + * machine checks. However this does handle protection faults on writes.
>   */
> -SYM_FUNC_START(__memcpy_mcsafe)
> +SYM_FUNC_START(memcpy_mcsafe_slow)
>         cmpl $8, %edx
>         /* Less than 8 bytes? Go to byte copy loop */
>         jb .L_no_whole_words
> @@ -260,8 +267,8 @@ SYM_FUNC_START(__memcpy_mcsafe)
>         xorl %eax, %eax
>  .L_done:
>         ret
> -SYM_FUNC_END(__memcpy_mcsafe)
> -EXPORT_SYMBOL_GPL(__memcpy_mcsafe)
> +SYM_FUNC_END(memcpy_mcsafe_slow)
> +EXPORT_SYMBOL_GPL(memcpy_mcsafe_slow)
>
>         .section .fixup, "ax"
>         /*
> @@ -296,4 +303,42 @@ EXPORT_SYMBOL_GPL(__memcpy_mcsafe)
>         _ASM_EXTABLE(.L_write_leading_bytes, .E_leading_bytes)
>         _ASM_EXTABLE(.L_write_words, .E_write_words)
>         _ASM_EXTABLE(.L_write_trailing_bytes, .E_trailing_bytes)
> +
> +/*
> + * memcpy_mcsafe_fast - memory copy with exception handling
> + *
> + * Fast string copy + exception handling. If the CPU does support
> + * machine check exception recovery, but does not support recovering
> + * from fast-string exceptions then this CPU needs to be added to the
> + * mcsafe_slow_key set of quirks. Otherwise, absent any machine check
> + * recovery support this version should be no slower than standard
> + * memcpy.
> + */
> +SYM_FUNC_START(memcpy_mcsafe_fast)
> +       ALTERNATIVE "jmp memcpy_mcsafe_slow", "", X86_FEATURE_ERMS
> +       movq %rdi, %rax
> +       movq %rdx, %rcx
> +.L_copy:
> +       rep movsb
> +       /* Copy successful. Return zero */
> +       xorl %eax, %eax
> +       ret
> +SYM_FUNC_END(memcpy_mcsafe_fast)
> +EXPORT_SYMBOL_GPL(memcpy_mcsafe_fast)
> +
> +       .section .fixup, "ax"
> +.E_copy:
> +       /*
> +        * On fault %rcx is updated such that the copy instruction could
> +        * optionally be restarted at the fault position, i.e. it
> +        * contains 'bytes remaining'. A non-zero return indicates error
> +        * to memcpy_mcsafe() users, or indicate short transfers to
> +        * user-copy routines.
> +        */
> +       movq %rcx, %rax
> +       ret
> +
> +       .previous
> +
> +       _ASM_EXTABLE_FAULT(.L_copy, .E_copy)
>  #endif
> diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
> index fff28c6f73a2..348c9331748e 100644
> --- a/arch/x86/lib/usercopy_64.c
> +++ b/arch/x86/lib/usercopy_64.c
> @@ -64,11 +64,7 @@ __visible notrace unsigned long
>  mcsafe_handle_tail(char *to, char *from, unsigned len)
>  {
>         for (; len; --len, to++, from++) {
> -               /*
> -                * Call the assembly routine back directly since
> -                * memcpy_mcsafe() may silently fallback to memcpy.
> -                */
> -               unsigned long rem = __memcpy_mcsafe(to, from, 1);
> +               unsigned long rem = memcpy_mcsafe(to, from, 1);
>
>                 if (rem)
>                         break;
> diff --git a/tools/objtool/check.c b/tools/objtool/check.c
> index 4768d91c6d68..bae1f77aae90 100644
> --- a/tools/objtool/check.c
> +++ b/tools/objtool/check.c
> @@ -485,7 +485,8 @@ static const char *uaccess_safe_builtin[] = {
>         "__ubsan_handle_shift_out_of_bounds",
>         /* misc */
>         "csum_partial_copy_generic",
> -       "__memcpy_mcsafe",
> +       "memcpy_mcsafe_slow",
> +       "memcpy_mcsafe_fast",
>         "mcsafe_handle_tail",
>         "ftrace_likely_update", /* CONFIG_TRACE_BRANCH_PROFILING */
>         NULL
> diff --git a/tools/perf/bench/mem-memcpy-x86-64-lib.c b/tools/perf/bench/mem-memcpy-x86-64-lib.c
> index 4130734dde84..23e1747b3a67 100644
> --- a/tools/perf/bench/mem-memcpy-x86-64-lib.c
> +++ b/tools/perf/bench/mem-memcpy-x86-64-lib.c
> @@ -5,17 +5,13 @@
>   */
>  #include <linux/types.h>
>
> -unsigned long __memcpy_mcsafe(void *dst, const void *src, size_t cnt);
> +unsigned long memcpy_mcsafe(void *dst, const void *src, size_t cnt);
>  unsigned long mcsafe_handle_tail(char *to, char *from, unsigned len);
>
>  unsigned long mcsafe_handle_tail(char *to, char *from, unsigned len)
>  {
>         for (; len; --len, to++, from++) {
> -               /*
> -                * Call the assembly routine back directly since
> -                * memcpy_mcsafe() may silently fallback to memcpy.
> -                */
> -               unsigned long rem = __memcpy_mcsafe(to, from, 1);
> +               unsigned long rem = memcpy_mcsafe(to, from, 1);
>
>                 if (rem)
>                         break;
> diff --git a/tools/testing/nvdimm/test/nfit.c b/tools/testing/nvdimm/test/nfit.c
> index bf6422a6af7f..282722d96f8e 100644
> --- a/tools/testing/nvdimm/test/nfit.c
> +++ b/tools/testing/nvdimm/test/nfit.c
> @@ -3136,7 +3136,7 @@ void mcsafe_test(void)
>                         }
>
>                         mcsafe_test_init(dst, src, 512);
> -                       rem = __memcpy_mcsafe(dst, src, 512);
> +                       rem = memcpy_mcsafe_slow(dst, src, 512);
>                         valid = mcsafe_test_validate(dst, src, 512, expect);
>                         if (rem == expect && valid)
>                                 continue;
>
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org