All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: linux-cxl@vger.kernel.org, Ben Widawsky <ben.widawsky@intel.com>,
	Vishal L Verma <vishal.l.verma@intel.com>,
	Linux NVDIMM <nvdimm@lists.linux.dev>,
	"Schofield, Alison" <alison.schofield@intel.com>,
	"Weiny, Ira" <ira.weiny@intel.com>
Subject: Re: [PATCH v4 14/21] cxl/mbox: Add exclusive kernel command support
Date: Mon, 13 Sep 2021 16:46:47 -0700	[thread overview]
Message-ID: <CAPcyv4i48AHtHOAJVsDKQ+Zg2QqnvQg1Ur8ekb6qR6cRDbkAzQ@mail.gmail.com> (raw)
In-Reply-To: <20210910103348.00005b5c@Huawei.com>

On Fri, Sep 10, 2021 at 2:34 AM Jonathan Cameron
<Jonathan.Cameron@huawei.com> wrote:
>
> On Wed, 8 Sep 2021 22:12:49 -0700
> Dan Williams <dan.j.williams@intel.com> wrote:
>
> > The CXL_PMEM driver expects exclusive control of the label storage area
> > space. Similar to the LIBNVDIMM expectation that the label storage area
> > is only writable from userspace when the corresponding memory device is
> > not active in any region, the expectation is the native CXL_PCI UAPI
> > path is disabled while the cxl_nvdimm for a given cxl_memdev device is
> > active in LIBNVDIMM.
> >
> > Add the ability to toggle the availability of a given command for the
> > UAPI path. Use that new capability to shutdown changes to partitions and
> > the label storage area while the cxl_nvdimm device is actively proxying
> > commands for LIBNVDIMM.
> >
> > Acked-by: Ben Widawsky <ben.widawsky@intel.com>
> > Link: https://lore.kernel.org/r/162982123298.1124374.22718002900700392.stgit@dwillia2-desk3.amr.corp.intel.com
> > Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> In the ideal world I'd like to have seen this as a noop patch going from devm
> to non devm for cleanup followed by new stuff.  meh, the world isn't ideal
> and all that sort of nice stuff takes time!

It would also require a series resend since I can't use the in-place
update in a way that b4 will recognize.

> Whilst I'm not that keen on the exact form of the code in probe() it will
> be easier to read when not a diff so if you prefer to keep it as you have
> it I won't object - it just took a little more careful reading than I'd like.

I circled back to devm after taking out the cleverness as you noted,
and that makes the patch more readable.

>
> Thanks,
>
> Jonathan
>
>
> > ---
> >  drivers/cxl/core/mbox.c   |    5 +++++
> >  drivers/cxl/core/memdev.c |   31 +++++++++++++++++++++++++++++++
> >  drivers/cxl/cxlmem.h      |    4 ++++
> >  drivers/cxl/pmem.c        |   43 ++++++++++++++++++++++++++++++++-----------
> >  4 files changed, 72 insertions(+), 11 deletions(-)
> >
> > diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> > index 422999740649..82e79da195fa 100644
> > --- a/drivers/cxl/core/mbox.c
> > +++ b/drivers/cxl/core/mbox.c
> > @@ -221,6 +221,7 @@ static bool cxl_mem_raw_command_allowed(u16 opcode)
> >   *  * %-EINVAL       - Reserved fields or invalid values were used.
> >   *  * %-ENOMEM       - Input or output buffer wasn't sized properly.
> >   *  * %-EPERM        - Attempted to use a protected command.
> > + *  * %-EBUSY        - Kernel has claimed exclusive access to this opcode
> >   *
> >   * The result of this command is a fully validated command in @out_cmd that is
> >   * safe to send to the hardware.
> > @@ -296,6 +297,10 @@ static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm,
> >       if (!test_bit(info->id, cxlm->enabled_cmds))
> >               return -ENOTTY;
> >
> > +     /* Check that the command is not claimed for exclusive kernel use */
> > +     if (test_bit(info->id, cxlm->exclusive_cmds))
> > +             return -EBUSY;
> > +
> >       /* Check the input buffer is the expected size */
> >       if (info->size_in >= 0 && info->size_in != send_cmd->in.size)
> >               return -ENOMEM;
> > diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
> > index df2ba87238c2..d9ade5b92330 100644
> > --- a/drivers/cxl/core/memdev.c
> > +++ b/drivers/cxl/core/memdev.c
> > @@ -134,6 +134,37 @@ static const struct device_type cxl_memdev_type = {
> >       .groups = cxl_memdev_attribute_groups,
> >  };
> >
> > +/**
> > + * set_exclusive_cxl_commands() - atomically disable user cxl commands
> > + * @cxlm: cxl_mem instance to modify
> > + * @cmds: bitmap of commands to mark exclusive
> > + *
> > + * Flush the ioctl path and disable future execution of commands with
> > + * the command ids set in @cmds.
>
> It's not obvious this function is doing that 'flush', Perhaps consider rewording?

Changed it to:

"Grab the cxl_memdev_rwsem in write mode to flush in-flight
invocations of the ioctl path and then disable future execution of
commands with the command ids set in @cmds."

>
> > + */
> > +void set_exclusive_cxl_commands(struct cxl_mem *cxlm, unsigned long *cmds)
> > +{
> > +     down_write(&cxl_memdev_rwsem);
> > +     bitmap_or(cxlm->exclusive_cmds, cxlm->exclusive_cmds, cmds,
> > +               CXL_MEM_COMMAND_ID_MAX);
> > +     up_write(&cxl_memdev_rwsem);
> > +}
> > +EXPORT_SYMBOL_GPL(set_exclusive_cxl_commands);
> > +
> > +/**
> > + * clear_exclusive_cxl_commands() - atomically enable user cxl commands
> > + * @cxlm: cxl_mem instance to modify
> > + * @cmds: bitmap of commands to mark available for userspace
> > + */
> > +void clear_exclusive_cxl_commands(struct cxl_mem *cxlm, unsigned long *cmds)
> > +{
> > +     down_write(&cxl_memdev_rwsem);
> > +     bitmap_andnot(cxlm->exclusive_cmds, cxlm->exclusive_cmds, cmds,
> > +                   CXL_MEM_COMMAND_ID_MAX);
> > +     up_write(&cxl_memdev_rwsem);
> > +}
> > +EXPORT_SYMBOL_GPL(clear_exclusive_cxl_commands);
> > +
> >  static void cxl_memdev_shutdown(struct device *dev)
> >  {
> >       struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
> > diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> > index 16201b7d82d2..468b7b8be207 100644
> > --- a/drivers/cxl/cxlmem.h
> > +++ b/drivers/cxl/cxlmem.h
> > @@ -101,6 +101,7 @@ struct cxl_mbox_cmd {
> >   * @mbox_mutex: Mutex to synchronize mailbox access.
> >   * @firmware_version: Firmware version for the memory device.
> >   * @enabled_cmds: Hardware commands found enabled in CEL.
> > + * @exclusive_cmds: Commands that are kernel-internal only
> >   * @pmem_range: Active Persistent memory capacity configuration
> >   * @ram_range: Active Volatile memory capacity configuration
> >   * @total_bytes: sum of all possible capacities
> > @@ -127,6 +128,7 @@ struct cxl_mem {
> >       struct mutex mbox_mutex; /* Protects device mailbox and firmware */
> >       char firmware_version[0x10];
> >       DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
> > +     DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
> >
> >       struct range pmem_range;
> >       struct range ram_range;
> > @@ -200,4 +202,6 @@ int cxl_mem_identify(struct cxl_mem *cxlm);
> >  int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm);
> >  int cxl_mem_create_range_info(struct cxl_mem *cxlm);
> >  struct cxl_mem *cxl_mem_create(struct device *dev);
> > +void set_exclusive_cxl_commands(struct cxl_mem *cxlm, unsigned long *cmds);
> > +void clear_exclusive_cxl_commands(struct cxl_mem *cxlm, unsigned long *cmds);
> >  #endif /* __CXL_MEM_H__ */
> > diff --git a/drivers/cxl/pmem.c b/drivers/cxl/pmem.c
> > index 9652c3ee41e7..a972af7a6e0b 100644
> > --- a/drivers/cxl/pmem.c
> > +++ b/drivers/cxl/pmem.c
> > @@ -16,10 +16,7 @@
> >   */
> >  static struct workqueue_struct *cxl_pmem_wq;
> >
> > -static void unregister_nvdimm(void *nvdimm)
> > -{
> > -     nvdimm_delete(nvdimm);
> > -}
> > +static __read_mostly DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
> >
> >  static int match_nvdimm_bridge(struct device *dev, const void *data)
> >  {
> > @@ -36,12 +33,25 @@ static struct cxl_nvdimm_bridge *cxl_find_nvdimm_bridge(void)
> >       return to_cxl_nvdimm_bridge(dev);
> >  }
> >
> > +static void cxl_nvdimm_remove(struct device *dev)
> > +{
> > +     struct cxl_nvdimm *cxl_nvd = to_cxl_nvdimm(dev);
> > +     struct nvdimm *nvdimm = dev_get_drvdata(dev);
> > +     struct cxl_memdev *cxlmd = cxl_nvd->cxlmd;
> > +     struct cxl_mem *cxlm = cxlmd->cxlm;
>
> Given cxlmd isn't used, perhaps combine the two lines above?

...gone with the return of devm.

>
> > +
> > +     nvdimm_delete(nvdimm);
> > +     clear_exclusive_cxl_commands(cxlm, exclusive_cmds);
> > +}
> > +
> >  static int cxl_nvdimm_probe(struct device *dev)
> >  {
> >       struct cxl_nvdimm *cxl_nvd = to_cxl_nvdimm(dev);
> > +     struct cxl_memdev *cxlmd = cxl_nvd->cxlmd;
> > +     struct cxl_mem *cxlm = cxlmd->cxlm;
>
> Again, clxmd not used so could save a line of code
> without loosing anything (unless it get used in a later patch of
> course!)

It is used... to grab cxlm, but it's an arbitrary style preference to
avoid de-reference chains longer than one. However, since I'm only
doing it once now perhaps you'll grant me this indulgence?

>
> >       struct cxl_nvdimm_bridge *cxl_nvb;
> > +     struct nvdimm *nvdimm = NULL;
> >       unsigned long flags = 0;
> > -     struct nvdimm *nvdimm;
> >       int rc = -ENXIO;
> >
> >       cxl_nvb = cxl_find_nvdimm_bridge();
> > @@ -50,25 +60,32 @@ static int cxl_nvdimm_probe(struct device *dev)
> >
> >       device_lock(&cxl_nvb->dev);
> >       if (!cxl_nvb->nvdimm_bus)
> > -             goto out;
> > +             goto out_unlock;
> > +
> > +     set_exclusive_cxl_commands(cxlm, exclusive_cmds);
> >
> >       set_bit(NDD_LABELING, &flags);
> > +     rc = -ENOMEM;
>
> Hmm. Setting rc to an error value even in the good path is a bit
> unusual.  I'd just add the few lines to set rc = -ENXIO only in the error
> path above and
> rc = -ENOMEM here only if nvdimm_create fails.
>
> What you have strikes me as a bit too clever :)

Agree, and devm slots in nicely again with that removed.

  reply	other threads:[~2021-09-13 23:47 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-09  5:11 [PATCH v4 00/21] cxl_test: Enable CXL Topology and UAPI regression tests Dan Williams
2021-09-09  5:11 ` [PATCH v4 01/21] libnvdimm/labels: Add uuid helpers Dan Williams
2021-09-09  5:11 ` [PATCH v4 02/21] libnvdimm/label: Add a helper for nlabel validation Dan Williams
2021-09-09  5:11 ` [PATCH v4 03/21] libnvdimm/labels: Introduce the concept of multi-range namespace labels Dan Williams
2021-09-09 13:09   ` Jonathan Cameron
2021-09-09 15:16     ` Dan Williams
2021-09-09 15:16       ` Dan Williams
2021-09-09  5:11 ` [PATCH v4 04/21] libnvdimm/labels: Fix kernel-doc for label.h Dan Williams
2021-09-10  8:38   ` Jonathan Cameron
2021-09-09  5:11 ` [PATCH v4 05/21] libnvdimm/label: Define CXL region labels Dan Williams
2021-09-09 15:58   ` Ben Widawsky
2021-09-09 18:38     ` Dan Williams
2021-09-09 18:38       ` Dan Williams
2021-09-09  5:12 ` [PATCH v4 06/21] libnvdimm/labels: Introduce CXL labels Dan Williams
2021-09-09  5:12 ` [PATCH v4 07/21] cxl/pci: Make 'struct cxl_mem' device type generic Dan Williams
2021-09-09 16:12   ` Ben Widawsky
2021-09-10  8:43   ` Jonathan Cameron
2021-09-09  5:12 ` [PATCH v4 08/21] cxl/pci: Clean up cxl_mem_get_partition_info() Dan Williams
2021-09-09 16:20   ` Ben Widawsky
2021-09-09 18:06     ` Dan Williams
2021-09-09 18:06       ` Dan Williams
2021-09-09 21:05       ` Ben Widawsky
2021-09-09 21:10         ` Dan Williams
2021-09-09 21:10           ` Dan Williams
2021-09-10  8:56         ` Jonathan Cameron
2021-09-13 22:19   ` [PATCH v5 " Dan Williams
2021-09-13 22:21     ` Dan Williams
2021-09-13 22:21       ` Dan Williams
2021-09-13 22:24   ` [PATCH v6 " Dan Williams
2021-09-09  5:12 ` [PATCH v4 09/21] cxl/mbox: Introduce the mbox_send operation Dan Williams
2021-09-09 16:34   ` Ben Widawsky
2021-09-10  8:58   ` Jonathan Cameron
2021-09-09  5:12 ` [PATCH v4 10/21] cxl/pci: Drop idr.h Dan Williams
2021-09-09 16:34   ` Ben Widawsky
2021-09-10  8:46     ` Jonathan Cameron
2021-09-09  5:12 ` [PATCH v4 11/21] cxl/mbox: Move mailbox and other non-PCI specific infrastructure to the core Dan Williams
2021-09-09 16:41   ` Ben Widawsky
2021-09-09 18:50     ` Dan Williams
2021-09-09 18:50       ` Dan Williams
2021-09-09 20:35       ` Ben Widawsky
2021-09-09 21:05         ` Dan Williams
2021-09-09 21:05           ` Dan Williams
2021-09-10  9:13   ` Jonathan Cameron
2021-09-09  5:12 ` [PATCH v4 12/21] cxl/pci: Use module_pci_driver Dan Williams
2021-09-09  5:12 ` [PATCH v4 13/21] cxl/mbox: Convert 'enabled_cmds' to DECLARE_BITMAP Dan Williams
2021-09-09  5:12 ` [PATCH v4 14/21] cxl/mbox: Add exclusive kernel command support Dan Williams
2021-09-09 17:02   ` Ben Widawsky
2021-09-10  9:33   ` Jonathan Cameron
2021-09-13 23:46     ` Dan Williams [this message]
2021-09-13 23:46       ` Dan Williams
2021-09-14  9:01       ` Jonathan Cameron
2021-09-14 12:22       ` Konstantin Ryabitsev
2021-09-14 14:39         ` Dan Williams
2021-09-14 14:39           ` Dan Williams
2021-09-14 15:51           ` Konstantin Ryabitsev
2021-09-14 19:03   ` [PATCH v5 " Dan Williams
2021-09-09  5:12 ` [PATCH v4 15/21] cxl/pmem: Translate NVDIMM label commands to CXL label commands Dan Williams
2021-09-09 17:22   ` Ben Widawsky
2021-09-09 19:03     ` Dan Williams
2021-09-09 19:03       ` Dan Williams
2021-09-09 20:32       ` Ben Widawsky
2021-09-10  9:39         ` Jonathan Cameron
2021-09-09 22:08   ` [PATCH v5 " Dan Williams
2021-09-10  9:40     ` Jonathan Cameron
2021-09-14 19:06   ` Dan Williams
2021-09-09  5:12 ` [PATCH v4 16/21] cxl/pmem: Add support for multiple nvdimm-bridge objects Dan Williams
2021-09-09 22:03   ` Dan Williams
2021-09-09 22:03     ` Dan Williams
2021-09-14 19:08   ` [PATCH v5 " Dan Williams
2021-09-09  5:13 ` [PATCH v4 17/21] tools/testing/cxl: Introduce a mocked-up CXL port hierarchy Dan Williams
2021-09-10  9:53   ` Jonathan Cameron
2021-09-10 18:46     ` Dan Williams
2021-09-10 18:46       ` Dan Williams
2021-09-14 19:14   ` [PATCH v5 " Dan Williams
2021-09-09  5:13 ` [PATCH v4 18/21] cxl/bus: Populate the target list at decoder create Dan Williams
2021-09-10  9:57   ` Jonathan Cameron
2021-09-09  5:13 ` [PATCH v4 19/21] cxl/mbox: Move command definitions to common location Dan Williams
2021-09-09  5:13 ` [PATCH v4 20/21] tools/testing/cxl: Introduce a mock memory device + driver Dan Williams
2021-09-10 10:09   ` Jonathan Cameron
2021-09-09  5:13 ` [PATCH v4 21/21] cxl/core: Split decoder setup into alloc + add Dan Williams
2021-09-10 10:33   ` Jonathan Cameron
2021-09-10 18:36     ` Dan Williams
2021-09-10 18:36       ` Dan Williams
2021-09-11 17:15       ` Ben Widawsky
2021-09-11 20:20         ` Dan Williams
2021-09-11 20:20           ` Dan Williams
2021-09-14 19:31   ` [PATCH v5 " Dan Williams
2021-09-21 14:24     ` Ben Widawsky
2021-09-21 16:18       ` Dan Williams
2021-09-21 16:18         ` Dan Williams
2021-09-21 19:22     ` [PATCH v6 " Dan Williams
2021-12-10 19:38       ` Nathan Chancellor
2021-12-10 19:41         ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAPcyv4i48AHtHOAJVsDKQ+Zg2QqnvQg1Ur8ekb6qR6cRDbkAzQ@mail.gmail.com \
    --to=dan.j.williams@intel.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=alison.schofield@intel.com \
    --cc=ben.widawsky@intel.com \
    --cc=ira.weiny@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    --cc=nvdimm@lists.linux.dev \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.