All of lore.kernel.org
 help / color / mirror / Atom feed
* [meta-fsl-arm-extra][PATCH] gk802: Add initial support
@ 2013-07-30  8:00 Matthias Benesch
  2013-07-30 12:21 ` Otavio Salvador
  2013-07-30 16:39 ` Daiane Angolini
  0 siblings, 2 replies; 7+ messages in thread
From: Matthias Benesch @ 2013-07-30  8:00 UTC (permalink / raw)
  To: meta-freescale

[-- Attachment #1: Type: text/plain, Size: 955 bytes --]

Hello,
I would like to commit support for Zealz GK802 Freescale i.MX6 Quad Core
device. 
The work is based on the information from
https://github.com/imx6-dongle/wiki/wiki 

Unfortunately it is not complete yet. U-Boot is working and the device
will load the kernel uImage from first fat partition. With the attached
"ubootcmd" file copied to the first fat partition of your micro-sd card,
the kernel will start completely, but will fail to init systemd (see
attached "gk802-boot.log" file).

I already tried several bootargs configuration via the ubootcmd file, up
to following bootargs config without any further success: 

setenv bootargs 'console=ttymxc3,115200 consoleblank=0
root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait
rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'

I hope for the communitie's support to be able to finalize this work and
get the GK802 supported within Yocto.

Regards,
Matthias

[-- Attachment #2: 0001-gk802-Add-initial-support.patch --]
[-- Type: text/x-patch, Size: 5803 bytes --]

From 6acae509feaf9deb72f6f9fa57471a7f3eac8d49 Mon Sep 17 00:00:00 2001
From: Matthias Benesch <twoof7@freenet.de>
Date: Tue, 30 Jul 2013 00:24:34 -0700
Subject: [meta-fsl-arm-extra][PATCH] gk802: Add initial support

Signed-off-by: Matthias Benesch <twoof7@freenet.de>
---
 conf/machine/gk802.conf                            | 19 ++++++++++++
 .../0001-use-fat-filesystem.patch                  | 15 ++++++++++
 recipes-bsp/u-boot/u-boot-imx6dongle_git.bb        | 16 ++++++++++
 .../0001-enable-ext2_3-fs.patch                    | 21 +++++++++++++
 recipes-kernel/linux/linux-imx6dongle_3.0.35.bb    | 34 ++++++++++++++++++++++
 5 files changed, 105 insertions(+)
 create mode 100644 conf/machine/gk802.conf
 create mode 100644 recipes-bsp/u-boot/u-boot-imx6dongle/0001-use-fat-filesystem.patch
 create mode 100644 recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
 create mode 100644 recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-enable-ext2_3-fs.patch
 create mode 100644 recipes-kernel/linux/linux-imx6dongle_3.0.35.bb

diff --git a/conf/machine/gk802.conf b/conf/machine/gk802.conf
new file mode 100644
index 0000000..05fcb48
--- /dev/null
+++ b/conf/machine/gk802.conf
@@ -0,0 +1,19 @@
+#@TYPE: Machine
+#@NAME: Zealz GK802
+#@SOC: i.MX6Q
+#@DESCRIPTION: Machine configuration for Zealz GK802
+
+include conf/machine/include/imx-base.inc
+include conf/machine/include/tune-cortexa9.inc
+
+SOC_FAMILY = "mx6:mx6q"
+
+PREFERRED_PROVIDER_u-boot = "u-boot-imx6dongle"
+PREFERRED_PROVIDER_virtual/kernel = "linux-imx6dongle"
+
+UBOOT_MACHINE = "gk802_config"
+
+SERIAL_CONSOLE = "115200 ttymxc0"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
+
diff --git a/recipes-bsp/u-boot/u-boot-imx6dongle/0001-use-fat-filesystem.patch b/recipes-bsp/u-boot/u-boot-imx6dongle/0001-use-fat-filesystem.patch
new file mode 100644
index 0000000..e91f32e
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-imx6dongle/0001-use-fat-filesystem.patch
@@ -0,0 +1,15 @@
+diff --git a/include/configs/gk802.h b/include/configs/gk802.h
+index a84f16b..c4d2b1b 100644
+--- a/include/configs/gk802.h
++++ b/include/configs/gk802.h
+@@ -115,8 +115,8 @@
+ 	"initrd_high=0xffffffff\0" \
+     "boot_recovery=setenv bootsuffix _recovery; setenv mmcdev 1; run try_boot; setenv mmcdev 0; run try_boot; run boot_normal\0" \
+     "boot_normal=  setenv bootsuffix ''; setenv mmcdev 1; run try_boot; setenv mmcdev 0; run try_boot\0" \
+-    "try_boot=if ext2load mmc ${mmcdev} ${loadaddr} /boot/ubootcmd${bootsuffix}; then source; fi;" \
+-    "         if ext2load mmc ${mmcdev} ${loadaddr} /boot/uImage${bootsuffix}; then bootm; fi;\0"
++    "try_boot=if fatload mmc ${mmcdev} ${loadaddr} /ubootcmd${bootsuffix}; then source; fi;" \
++    "         if fatload mmc ${mmcdev} ${loadaddr} /uImage${bootsuffix}; then bootm; fi;\0"
+ 
+ 
+ 
diff --git a/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb b/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
new file mode 100644
index 0000000..468b991
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
@@ -0,0 +1,16 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
+COMPATIBLE_MACHINE = "(gk802)"
+
+PROVIDES = "u-boot"
+
+SRCREV = "AUTOINC"
+SRC_URI = "git://github.com/imx6-dongle/uboot-imx6dongle.git \
+           file://0001-use-fat-filesystem.patch \
+"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-enable-ext2_3-fs.patch b/recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-enable-ext2_3-fs.patch
new file mode 100644
index 0000000..92f06b8
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-enable-ext2_3-fs.patch
@@ -0,0 +1,21 @@
+diff --git a/arch/arm/configs/imx6_gk802_defconfig b/arch/arm/configs/imx6_gk802_defconfig
+index da72294..a6ba5cb 100644
+--- a/arch/arm/configs/imx6_gk802_defconfig
++++ b/arch/arm/configs/imx6_gk802_defconfig
+@@ -2432,8 +2432,14 @@ CONFIG_MXC_MIPI_CSI2=m
+ #
+ # File systems
+ #
+-# CONFIG_EXT2_FS is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
+ CONFIG_EXT4_FS=y
+ CONFIG_EXT4_USE_FOR_EXT23=y
+ CONFIG_EXT4_FS_XATTR=y
diff --git a/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb b/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb
new file mode 100644
index 0000000..40ee110
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb
@@ -0,0 +1,34 @@
+# Adapted from linux-imx.inc, copyright (C) 2013 O.S. Systems Software LTDA
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+require recipes-kernel/linux/linux-imx.inc
+
+DESCRIPTION = "Linux kernel for Zealz GK802"
+
+PR = "${INC_PR}.1"
+
+COMPATIBLE_MACHINE = "(mx6)"
+
+SRC_URI = "git://github.com/imx6-dongle/linux-imx.git;branch=imx_3.0.35_1.1.0-hdmidongle \
+           file://0001-enable-ext2_3-fs.patch \
+"
+
+SRCREV = "AUTOINC"
+
+LOCALVERSION = "-imx6dongle+yocto"
+
+#KERNEL_DEFCONFIG = "imx6_hdmidongle_defconfig"
+KERNEL_DEFCONFIG = "imx6_gk802_defconfig"
+
+do_configure_prepend() {
+	cp ${S}/arch/arm/configs/${KERNEL_DEFCONFIG} ${S}/.config
+	cp ${S}/arch/arm/configs/${KERNEL_DEFCONFIG} ${S}/../defconfig
+
+	kernel_conf_variable LOCALVERSION "\"${LOCALVERSION}\""
+	kernel_conf_variable LOCALVERSION_AUTO y
+
+	# Add GIT revision to the local version
+	head=`git rev-parse --verify --short HEAD 2> /dev/null`
+	printf "%s%s" +g $head > ${S}/.scmversion
+}
+
-- 
1.8.3.4


[-- Attachment #3: ubootcmd --]
[-- Type: application/octet-stream, Size: 172 bytes --]

[-- Attachment #4: gk802-boot.log --]
[-- Type: text/x-log, Size: 14584 bytes --]




U-Boot 2013.01-rc1-g7a2d058-dirty (Jul 28 2013 - 19:48:27)


CPU:   Freescale i.MX6Q rev1.2 at 792 MHz

Reset cause: POR

Board: MX6Q-gk802

DRAM:  1 GiB

MMC:   FSL_SDHC: 0, FSL_SDHC: 1

*** Warning - bad CRC, using default environment


got mode 1024x768@60

1165476 active pixels, pixel clock 14300 ps

enable_hdmi: setup HDMI monitor

Display: HDMI (1024x768)

In:    serial

Out:   serial

Err:   serial

Hit any key to stop autoboot:  5  4  0 

U-Boot > 

U-Boot > setenv bootargs 'console=ttymxc3,115200 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'

U-Boot > 

U-Boot > run bootcmd

MMC: no card present

** Bad device mmc 1 **

MMC: no card present

** Bad device mmc 1 **

bad MBR sector signature 0x0000

** Invalid partition 1 **

reading /uImage

3878892 bytes read

## Booting kernel from Legacy Image at 10800000 ...

   Image Name:   Linux-3.0.35-imx6dongle+yocto+g8

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    3878828 Bytes = 3.7 MiB

   Load Address: 10008000

   Entry Point:  10008000

   Verifying Checksum ... OK

   Loading Kernel Image ... OK

OK


Starting kernel ...


Linux version 3.0.35-imx6dongle+yocto+g899792c (matthias@bDesk) (gcc version 4.7.2 (GCC) ) #2 SMP PREEMPT Sun Jul 28 19:52:31 PDT 2013
CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale i.MX6q Hi802/GK802 board
Memory policy: ECC disabled, Data cache writealloc
CPU identified as i.MX6Q, silicon rev 1.2
PERCPU: Embedded 7 pages/cpu @8c008000 s5216 r8192 d15264 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 210944
Kernel command line: console=ttymxc3,115200 consoleblank=0 root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 576MB 256MB = 832MB total
Memory: 831348k/831348k available, 217228k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xf4600000 - 0xffe00000   ( 184 MB)
    vmalloc : 0xc0800000 - 0xf2000000   ( 792 MB)
    lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
    pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
    modules : 0x7f000000 - 0x7fe00000   (  14 MB)
      .init : 0x80008000 - 0x80037000   ( 188 kB)
      .text : 0x80037000 - 0x80a90fcc   (10600 kB)
      .data : 0x80a92000 - 0x80ae7b60   ( 343 kB)
       .bss : 0x80ae7b84 - 0x80b35b4c   ( 312 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:496
MXC GPIO hardware
sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
arm_max_freq=2
MXC_Early serial console at MMIO 0x21f0000 (options '115200')
bootconsole [ttymxc3] enabled
Console: colour dummy device 80x30
Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
CPU1: Booted secondary processor
CPU2: Booted secondary processor
CPU3: Booted secondary processor
Brought up 4 CPUs
SMP: Total of 4 processors activated (6324.22 BogoMIPS).
print_constraints: dummy: 
NET: Registered protocol family 16
print_constraints: vddpu: 725 <--> 1300 mV at 1100 mV fast normal 
print_constraints: vddcore: 725 <--> 1300 mV at 1100 mV fast normal 
print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal 
print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal 
print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal 
print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal 
hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
hw-breakpoint: maximum watchpoint size is 4 bytes.
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
bio: create slab <bio-0> at 0
mxs-dma mxs-dma-apbh: initialized
print_constraints: vmmc: 3300 mV 
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Freescale USB OTG Driver loaded, $Revision: 1.55 $
imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
i2c-core: driver [max17135] using legacy suspend method
i2c-core: driver [max17135] using legacy resume method
Switching to clocksource mxc_timer1
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Static Power Management for Freescale i.MX6
wait mode is enabled for i.MX6
cpaddr = c0880000 suspend_iram_base=c08ec000
PM driver module loaded
IMX usb wakeup probe
add wake up source irq 75
IMX usb wakeup probe
JFFS2 version 2.2. (NAND)  2001-2006 Red Hat, Inc.
msgmni has been set to 1623
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
MIPI DSI driver module loaded
mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
fbcvt: 1280x720@60: CVT Name - .921M9
imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
Console: switching to colour frame buffer device 160x45
imx-sdma imx-sdma: loaded firmware 1.1
imx-sdma imx-sdma: initialized
Serial: IMX driver
imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
console [ttymxc3] enabled, bootconsole disabled
console [ttymxc3] enabled, bootconsole disabled
loop: module loaded
GPMI NAND driver registered. (IMX)
vcan: Virtual CAN interface driver
CAN device driver interface
FEC Ethernet Driver
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
usbcore: registered new interface driver kaweth
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
hso: drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver asix
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver gl620a
usbcore: registered new interface driver net1080
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver ipheth
usbcore: registered new interface driver sierra_net
cdc_ncm: 04-Aug-2011
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver lg-vl600
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
add wake up source irq 72
fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ARC USBOTG Device Controller driver (1 August 2005)
mousedev: PS/2 mouse device common for all mice
i2c-core: driver [isl29023] using legacy suspend method
i2c-core: driver [isl29023] using legacy resume method
snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
i2c /dev entries driver
Linux video capture interface: v2.00
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
i2c-core: driver [mag3110] using legacy suspend method
i2c-core: driver [mag3110] using legacy resume method
imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: SDHCI controller on platform [sdhci-esdhc-imx.3] using DMA
mmc1: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
VPU initialized
Thermal calibration data is 0x5c250d69
Thermal sensor with ratio = 193
Anatop Thermal registered as thermal_zone0
anatop_thermal_probe: default cooling device is cpufreq!
caam caam.0: device ID = 0x0a16010000000000
caam caam.0: job rings = 2, qi = 0
alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam)
caam caam.0: authenc-hmac-md5-cbc-aes-caam
alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam)
caam caam.0: authenc-hmac-sha1-cbc-aes-caam
alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
caam caam.0: authenc-hmac-sha224-cbc-aes-caam
alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam)
caam caam.0: authenc-hmac-sha256-cbc-aes-caam
alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-md5-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha1),cbc(des3_ede)) (authenc-hmac-sha1-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha1-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha224),cbc(des3_ede)) (authenc-hmac-sha224-cbc-des3_ede-caam)
caam caam.0: authenc-hmac-sha224-cbc-des3_ede-caam
alg: No test for authenc(hmac(sha256),cbc(des3_ede)) (authenc-hmac-sha256-cbc-des3_ede-caam)
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU08G 7.40 GiB 
 mmcblk0: p1 p2
caam caam.0: authenc-hmac-sha256-cbc-des3_ede-caam
alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
caam caam.0: authenc-hmac-md5-cbc-des-caam
alg: No test for authenc(hmac(sha1),cbc(des)) (authenc-hmac-sha1-cbc-des-caam)
caam caam.0: authenc-hmac-sha1-cbc-des-caam
alg: No test for authenc(hmac(sha224),cbc(des)) (authenc-hmac-sha224-cbc-des-caam)
usb 2-1: new high speed USB device number 2 using fsl-ehci
caam caam.0: authenc-hmac-sha224-cbc-des-caam
alg: No test for authenc(hmac(sha256),cbc(des)) (authenc-hmac-sha256-cbc-des-caam)
caam caam.0: authenc-hmac-sha256-cbc-des-caam
caam caam.0: cbc-aes-caam
caam caam.0: cbc-3des-caam
caam caam.0: cbc-des-caam
platform caam_jr.0: registering rng-caam
platform caam_sm.0: caam_sm_test: 8-byte key test match OK
platform caam_sm.0: caam_sm_test: 16-byte key test match OK
platform caam_sm.0: caam_sm_test: 32-byte key test match OK
platform caam_secvio.0: security violation service handlers armed
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
ALSA device list:
  #0: imx-hdmi-soc
NET: Registered protocol family 26
TCP cubic registered
NET: Registered protocol family 17
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
can: raw protocol (rev 20090105)
can: broadcast manager protocol (rev 20090105 t)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Bus freq driver module loaded
Bus freq driver Enabled
mxc_dvfs_core_probe
DVFS driver module loaded
snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)

EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (mmcblk0p2): using internal journal
EXT3-fs (mmcblk0p2): recovery complete
EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 188K

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [meta-fsl-arm-extra][PATCH] gk802: Add initial support
  2013-07-30  8:00 [meta-fsl-arm-extra][PATCH] gk802: Add initial support Matthias Benesch
@ 2013-07-30 12:21 ` Otavio Salvador
  2013-07-30 16:39 ` Daiane Angolini
  1 sibling, 0 replies; 7+ messages in thread
From: Otavio Salvador @ 2013-07-30 12:21 UTC (permalink / raw)
  To: Matthias Benesch; +Cc: meta-freescale

[-- Attachment #1: Type: text/plain, Size: 1752 bytes --]

Hello Matthias,

On Tue, Jul 30, 2013 at 5:00 AM, Matthias Benesch <twoof7@freenet.de> wrote:
> I would like to commit support for Zealz GK802 Freescale i.MX6 Quad Core
> device.
> The work is based on the information from
> https://github.com/imx6-dongle/wiki/wiki

Last time I talked with GK802 guys they were working in porting it to
U-Boot mainline; I have made the patches here to integrate it to
meta-fsl-arm-extra a while ago but I am awaiting for their U-Boot
patch. I am attaching the three patches for reference anyway.

> Unfortunately it is not complete yet. U-Boot is working and the device
> will load the kernel uImage from first fat partition. With the attached
> "ubootcmd" file copied to the first fat partition of your micro-sd card,
> the kernel will start completely, but will fail to init systemd (see
> attached "gk802-boot.log" file).
>
> I already tried several bootargs configuration via the ubootcmd file, up
> to following bootargs config without any further success:
>
> setenv bootargs 'console=ttymxc3,115200 consoleblank=0
> root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait
> rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'
>
> I hope for the communitie's support to be able to finalize this work and
> get the GK802 supported within Yocto.

I think you should focus in get it booting and working, initially,
with core-image-base and then move to more complex use-cases like
systemd afterwards.

Please check the patches I attached to see if they help in something.

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

[-- Attachment #2: 0003-gk802-Add-Zealz-GK802-Mini-PC-TV-Stick-recipe.patch --]
[-- Type: application/octet-stream, Size: 1191 bytes --]

From 21e845767633390e5fe603611b6da5c84ff398f0 Mon Sep 17 00:00:00 2001
From: Otavio Salvador <otavio@ossystems.com.br>
Date: Sun, 28 Apr 2013 10:25:19 -0300
Subject: [PATCH 3/3] gk802: Add Zealz GK802 Mini PC TV Stick recipe

Change-Id: I09b3510d7dc8c4d81187931621c12f171db51a86
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
 conf/machine/gk802.conf | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 conf/machine/gk802.conf

diff --git a/conf/machine/gk802.conf b/conf/machine/gk802.conf
new file mode 100644
index 0000000..69b8e15
--- /dev/null
+++ b/conf/machine/gk802.conf
@@ -0,0 +1,20 @@
+#@TYPE: Machine
+#@NAME: Zealz GK802 Mini PC TV Stick
+#@SOC: i.MX6Q
+#@DESCRIPTION: Machine configuration for Zealz GK802 Mini PC TV Stick
+
+include conf/machine/include/imx-base.inc
+include conf/machine/include/tune-cortexa9.inc
+
+SOC_FAMILY = "mx6:mx6q"
+
+PREFERRED_PROVIDER_u-boot = "u-boot-imx6dongle"
+PREFERRED_PROVIDER_virtual/kernel = "linux-imx6dongle"
+
+UBOOT_MACHINE = "gk802_config"
+
+SERIAL_CONSOLE = "115200 ttymxc1"
+
+MACHINE_EXTRA_RRECOMMENDS += "linux-firmware-wl12xx"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
-- 
1.8.3.2


[-- Attachment #3: 0002-linux-imx6dongle-Add-Linux-Kernel-fork-of-i.MX6-Mini.patch --]
[-- Type: application/octet-stream, Size: 76242 bytes --]

From 4f773d693eb4473830e25d39954ae8ea9804208d Mon Sep 17 00:00:00 2001
From: Otavio Salvador <otavio@ossystems.com.br>
Date: Sun, 28 Apr 2013 19:53:51 -0300
Subject: [PATCH 2/3] linux-imx6dongle: Add Linux Kernel fork of i.MX6 Mini PC
 TV Stick community

Change-Id: Ibbe8bebca1383e79a28e79b69445c475f745b5e1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
 recipes-kernel/linux/linux-imx6dongle/defconfig | 2807 +++++++++++++++++++++++
 recipes-kernel/linux/linux-imx6dongle_3.0.35.bb |   14 +
 2 files changed, 2821 insertions(+)
 create mode 100644 recipes-kernel/linux/linux-imx6dongle/defconfig
 create mode 100644 recipes-kernel/linux/linux-imx6dongle_3.0.35.bb

diff --git a/recipes-kernel/linux/linux-imx6dongle/defconfig b/recipes-kernel/linux/linux-imx6dongle/defconfig
new file mode 100644
index 0000000..4b97fb3
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx6dongle/defconfig
@@ -0,0 +1,2807 @@
+#
+# Automatically generated make config: don't edit
+# Linux/arm 3.0.35 Kernel Configuration
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_HAVE_SCHED_CLOCK=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_KTIME_SCALAR=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_FIQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_IRQ_WORK=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+
+#
+# IRQ subsystem
+#
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SPARSE_IRQ=y
+CONFIG_GENERIC_IRQ_SHOW=y
+# CONFIG_SPARSE_IRQ is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_PREEMPT_RCU=y
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_RCU_BOOST is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EXPERT=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_EMBEDDED=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P64X0 is not set
+# CONFIG_ARCH_S5PC100 is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_EXYNOS4 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_TCC_926 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_ARCH_VT8500 is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+CONFIG_IMX_HAVE_PLATFORM_DMA=y
+CONFIG_IMX_HAVE_PLATFORM_FEC=y
+CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_SNVS_RTC=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_CAAM=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_I2C=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_UART=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_PWM=y
+CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX=y
+CONFIG_IMX_HAVE_PLATFORM_SPI_IMX=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_IPUV3=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_VPU=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_DVFS=y
+CONFIG_IMX_HAVE_PLATFORM_AHCI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_OCOTP=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_VIIM=y
+CONFIG_IMX_HAVE_PLATFORM_LDB=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_SPDIF=y
+CONFIG_IMX_HAVE_PLATFORM_VIV_GPU=y
+CONFIG_IMX_HAVE_PLATFORM_MXC_HDMI=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_ANATOP_THERMAL=y
+CONFIG_IMX_HAVE_PLATFORM_FSL_OTG=y
+CONFIG_IMX_HAVE_PLATFORM_FSL_USB_WAKEUP=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_PM=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_VDOA=y
+CONFIG_IMX_HAVE_PLATFORM_IMX_PCIE=y
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MX503 is not set
+# CONFIG_ARCH_MX51 is not set
+CONFIG_ARCH_MX6=y
+CONFIG_ARCH_MX6Q=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_SOC_IMX6Q=y
+# CONFIG_MACH_MX6Q_ARM2 is not set
+# CONFIG_MACH_MX6SL_ARM2 is not set
+# CONFIG_MACH_MX6SL_EVK is not set
+# CONFIG_MACH_MX6Q_SABRELITE is not set
+# CONFIG_MACH_MX6Q_SABRESD is not set
+# CONFIG_MACH_MX6Q_SABREAUTO is not set
+CONFIG_MACH_MX6Q_HDMIDONGLE=y
+
+#
+# MX6 Options:
+#
+# CONFIG_IMX_PCIE is not set
+CONFIG_USB_EHCI_ARC_H1=y
+CONFIG_USB_FSL_ARC_OTG=y
+# CONFIG_MX6_CLK_FOR_BOOTUI_TRANS is not set
+CONFIG_ISP1504_MXC=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+# CONFIG_MXC_DEBUG_BOARD is not set
+CONFIG_MXC_REBOOT_MFGMODE=y
+# CONFIG_MXC_REBOOT_ANDROID_CMD is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+CONFIG_ARCH_MXC_AUDMUX_V2=y
+CONFIG_IRAM_ALLOC=y
+CONFIG_CLK_DEBUG=y
+CONFIG_DMA_ZONE_SIZE=184
+
+#
+# System MMU
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_SWP_EMULATE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_ARM_ERRATA_742230 is not set
+# CONFIG_ARM_ERRATA_742231 is not set
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_ARM_ERRATA_720789 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+# CONFIG_ARM_ERRATA_753970 is not set
+CONFIG_ARM_ERRATA_754322=y
+# CONFIG_ARM_ERRATA_754327 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+CONFIG_ARM_ERRATA_764369=y
+# CONFIG_PL310_ERRATA_769419 is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HW_PERF_EVENTS=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_COMPACTION=y
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_KSM=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_CLEANCACHE is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_CC_STACKPROTECTOR is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+
+#
+# Boot options
+#
+# CONFIG_USE_OF is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw rootfstype=jffs2 ip=off"
+CONFIG_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_AUTO_ZRELADDR is not set
+
+#
+# CPU Power Management
+#
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_STAT=m
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_INTERACTIVE is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_IMX is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_DEVICE_TIME_DEBUG=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME_CLK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=y
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+# CONFIG_BATMAN_ADV is not set
+CONFIG_RPS=y
+CONFIG_RFS_ACCEL=y
+CONFIG_XPS=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+CONFIG_CAN_VCAN=y
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+# CONFIG_CAN_MCP251X is not set
+# CONFIG_CAN_SJA1000 is not set
+# CONFIG_CAN_C_CAN is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_ESD_USB2 is not set
+# CONFIG_CAN_SOFTING is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=y
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+# CONFIG_BT_HCIUART_H4 is not set
+# CONFIG_BT_HCIUART_BCSP is not set
+CONFIG_BT_HCIUART_ATH3K=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIVHCI=y
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+CONFIG_LIB80211_CRYPT_WEP=y
+CONFIG_LIB80211_CRYPT_CCMP=y
+CONFIG_LIB80211_CRYPT_TKIP=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+CONFIG_RFKILL=y
+CONFIG_RFKILL_LEDS=y
+CONFIG_RFKILL_INPUT=y
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RFKILL_GPIO is not set
+# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
+# CONFIG_CEPH_LIB is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_SWAP is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_GPMI_NAND=y
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_BMP085 is not set
+CONFIG_MXS_PERFMON=m
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+
+#
+# Texas Instruments shared transport line discipline
+#
+# CONFIG_TI_ST is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
+
+#
+# Controllers with non-SFF native interface
+#
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_ATA_SFF=y
+
+#
+# SFF controllers with custom DMA interface
+#
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
+# CONFIG_SATA_MV is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
+# CONFIG_PATA_ARASAN_CF is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_PLATFORM is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_MD is not set
+# CONFIG_TARGET_CORE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_MII=y
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_MICREL_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_SMSC911X_ARCH_HOOKS is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+CONFIG_FEC_NAPI=y
+# CONFIG_FEC_1588 is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_ATH_COMMON=m
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_CARL9170 is not set
+CONFIG_ATH6KL=m
+# CONFIG_ATH6KL_DEBUG is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_BCM4330 is not set
+CONFIG_HOSTAP=y
+# CONFIG_HOSTAP_FIRMWARE is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+# CONFIG_RT2500USB is not set
+# CONFIG_RT73USB is not set
+# CONFIG_RT2800USB is not set
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX_MENU is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_MWIFIEX is not set
+CONFIG_RTL8192CU=m
+# CONFIG_RTL8187 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_CDC_NCM=y
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_KALMIA is not set
+CONFIG_USB_HSO=y
+# CONFIG_USB_NET_INT51X1 is not set
+CONFIG_USB_IPHETH=y
+CONFIG_USB_SIERRA_NET=y
+CONFIG_USB_VL600=y
+# CONFIG_WAN is not set
+
+#
+# CAIF transport drivers
+#
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_IMX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+CONFIG_TOUCHSCREEN_EGALAX=y
+CONFIG_TOUCHSCREEN_ELAN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+CONFIG_TOUCHSCREEN_MAX11801=y
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_NOVATEK is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_P1003 is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_CMA3000 is not set
+CONFIG_INPUT_ISL29023=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+# CONFIG_TRACE_SINK is not set
+CONFIG_DEVKMEM=y
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX3107 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_TTY_PRINTK is not set
+CONFIG_FSL_OTP=y
+# CONFIG_HVC_DCC is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_RAMOOPS is not set
+CONFIG_MXS_VIIM=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_MUX is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ALTERA is not set
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_IMX_VER_2_3=y
+CONFIG_SPI_IMX=y
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+
+#
+# PPS generators support
+#
+
+#
+# PTP clock support
+#
+
+#
+# Enable Device Drivers -> PPS to see the PTP clock options.
+#
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO drivers:
+#
+# CONFIG_GPIO_BASIC_MMIO is not set
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X_IRQ is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_WM8994 is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_74X164 is not set
+
+#
+# AC97 GPIO expanders:
+#
+
+#
+# MODULbus GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ20Z75 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_MAX8903 is not set
+CONFIG_SABRESD_MAX8903=y
+# CONFIG_CHARGER_GPIO is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+CONFIG_SENSORS_MAX17135=y
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_PMBUS is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_MAG3110=y
+# CONFIG_MXC_MMA8450 is not set
+CONFIG_MXC_MMA8451=y
+CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+# CONFIG_MPCORE_WATCHDOG is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+CONFIG_IMX2_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+CONFIG_BCMA_POSSIBLE=y
+
+#
+# Broadcom specific AMBA
+#
+# CONFIG_BCMA is not set
+CONFIG_MFD_SUPPORT=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+CONFIG_MFD_WM8994=y
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_PMIC_DIALOG is not set
+# CONFIG_MFD_MC_PMIC is not set
+# CONFIG_MFD_MC34708 is not set
+CONFIG_MFD_PFUZE=y
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_TPS65910 is not set
+CONFIG_MFD_MAX17135=y
+CONFIG_MFD_MXC_HDMI=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_DUMMY is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_WM8994 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_MC34708 is not set
+CONFIG_REGULATOR_PFUZE100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_AD5398 is not set
+CONFIG_REGULATOR_ANATOP=y
+# CONFIG_REGULATOR_TPS6524X is not set
+CONFIG_REGULATOR_MAX17135=y
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+# CONFIG_MEDIA_CONTROLLER is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA827X=y
+CONFIG_MEDIA_TUNER_TDA18271=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders, decoders, sensors and other helper chips
+#
+
+#
+# Audio decoders, processors and mixers
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_AK881X is not set
+
+#
+# Camera sensor devices
+#
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# Miscelaneous helper chips
+#
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_MXC_CAMERA=m
+
+#
+# MXC Camera/V4L2 PRP Features support
+#
+CONFIG_VIDEO_MXC_IPU_CAMERA=y
+# CONFIG_VIDEO_MXC_CSI_CAMERA is not set
+# CONFIG_MXC_CAMERA_MICRON111 is not set
+# CONFIG_MXC_CAMERA_OV2640 is not set
+CONFIG_MXC_CAMERA_OV3640=m
+CONFIG_MXC_CAMERA_OV5640=m
+CONFIG_MXC_CAMERA_OV8820_MIPI=m
+CONFIG_MXC_CAMERA_OV5642=m
+CONFIG_MXC_CAMERA_OV5640_MIPI=m
+# CONFIG_MXC_MIPI_CSI2_TVIN_ADV7280 is not set
+CONFIG_MXC_CAMERA_SENSOR_CLK=m
+CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
+CONFIG_MXC_IPU_PRP_ENC=m
+CONFIG_MXC_IPU_CSI_ENC=m
+CONFIG_VIDEO_MXC_OUTPUT=y
+CONFIG_VIDEO_MXC_IPU_OUTPUT=y
+# CONFIG_VIDEO_MXC_IPUV1_WVGA_OUTPUT is not set
+# CONFIG_VIDEO_MXC_OPL is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_PWC is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+
+#
+# Graphics support
+#
+CONFIG_DRM=m
+CONFIG_DRM_VIVANTE=m
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_WMT_GE_ROPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_FB_MXC=y
+CONFIG_FB_MXC_EDID=y
+CONFIG_FB_MXC_SYNC_PANEL=y
+# CONFIG_FB_MXC_EPSON_VGA_SYNC_PANEL is not set
+CONFIG_FB_MXC_LDB=y
+CONFIG_FB_MXC_MIPI_DSI=y
+CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
+# CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL is not set
+# CONFIG_FB_MXC_SEIKO_WVGA_SYNC_PANEL is not set
+# CONFIG_FB_MXC_SII902X is not set
+# CONFIG_FB_MXC_CH7026 is not set
+# CONFIG_FB_MXC_TVOUT_CH7024 is not set
+# CONFIG_FB_MXC_ASYNC_PANEL is not set
+CONFIG_FB_MXC_EINK_PANEL=y
+# CONFIG_FB_MXC_EINK_AUTO_UPDATE_MODE is not set
+# CONFIG_FB_MXC_SIPIX_PANEL is not set
+# CONFIG_FB_MXC_ELCDIF_FB is not set
+CONFIG_FB_MXC_HDMI=y
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+# CONFIG_SND_ARMAACI is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_6FIRE is not set
+CONFIG_SND_SOC=y
+# CONFIG_SND_SOC_CACHE_LZO is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_MXC_SOC_MX2=y
+CONFIG_SND_MXC_SOC_SPDIF_DAI=y
+# CONFIG_SND_SOC_IMX_WM8958 is not set
+CONFIG_SND_SOC_IMX_WM8962=y
+# CONFIG_SND_SOC_IMX_SI4763 is not set
+CONFIG_SND_SOC_IMX_SPDIF=y
+CONFIG_SND_SOC_IMX_HDMI=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_MXC_HDMI=y
+CONFIG_SND_SOC_MXC_SPDIF=y
+CONFIG_SND_SOC_WM8962=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+# CONFIG_HID_ACRUX is not set
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+# CONFIG_HID_PRODIKEYS is not set
+CONFIG_HID_CYPRESS=m
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_ELECOM is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_WALTOP is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LCPOWER is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIWII_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_ARVO is not set
+# CONFIG_HID_ROCCAT_KONE is not set
+# CONFIG_HID_ROCCAT_KONEPLUS is not set
+# CONFIG_HID_ROCCAT_KOVAPLUS is not set
+# CONFIG_HID_ROCCAT_PYRA is not set
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ARC=y
+CONFIG_USB_EHCI_ARC_OTG=y
+# CONFIG_USB_EHCI_ARC_HSIC is not set
+# CONFIG_USB_STATIC_IRAM is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_MXC is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=y
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_YUREX is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_ARC=y
+# CONFIG_IMX_USB_CHARGER is not set
+CONFIG_USB_ARC=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_FUSB300 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA_U2O is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FUNCTIONFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_FSL_UTP is not set
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_WEBCAM is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MXC_OTG=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_CLKGATE is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=8
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_ARMMMCI is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+
+#
+# LED Triggers
+#
+# CONFIG_NFC_DEVICES is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_MXC_V2 is not set
+CONFIG_RTC_DRV_SNVS=y
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
+
+#
+# DMA Devices
+#
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_DW_DMAC is not set
+CONFIG_MXC_PXP_V2=y
+CONFIG_MXC_PXP_CLIENT_DEVICE=y
+# CONFIG_TIMB_DMA is not set
+CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+
+#
+# MXC support drivers
+#
+CONFIG_MXC_IPU=y
+CONFIG_MXC_IPU_V3=y
+CONFIG_MXC_IPU_V3H=y
+
+#
+# MXC SSI support
+#
+# CONFIG_MXC_SSI is not set
+
+#
+# MXC Digital Audio Multiplexer support
+#
+# CONFIG_MXC_DAM is not set
+
+#
+# MXC PMIC support
+#
+# CONFIG_MXC_PMIC_MC13783 is not set
+# CONFIG_MXC_PMIC_MC13892 is not set
+# CONFIG_MXC_PMIC_MC34704 is not set
+# CONFIG_MXC_PMIC_MC9SDZ60 is not set
+# CONFIG_MXC_PMIC_MC9S08DZ60 is not set
+
+#
+# MXC Security Drivers
+#
+# CONFIG_MXC_SECURITY_SCC is not set
+# CONFIG_MXC_SECURITY_RNG is not set
+
+#
+# MXC MPEG4 Encoder Kernel module support
+#
+# CONFIG_MXC_HMP4E is not set
+
+#
+# MXC HARDWARE EVENT
+#
+# CONFIG_MXC_HWEVENT is not set
+
+#
+# MXC VPU(Video Processing Unit) support
+#
+CONFIG_MXC_VPU=y
+# CONFIG_MXC_VPU_DEBUG is not set
+# CONFIG_MX6_VPU_352M is not set
+
+#
+# MXC Asynchronous Sample Rate Converter support
+#
+CONFIG_MXC_ASRC=y
+
+#
+# MXC Bluetooth support
+#
+
+#
+# Broadcom GPS ioctrl support
+#
+
+#
+# MXC Media Local Bus Driver
+#
+# CONFIG_MXC_MLB150 is not set
+
+#
+# i.MX ADC support
+#
+# CONFIG_IMX_ADC is not set
+
+#
+# MXC Vivante GPU support
+#
+CONFIG_MXC_GPU_VIV=y
+
+#
+# ANATOP_THERMAL
+#
+CONFIG_ANATOP_THERMAL=y
+
+#
+# MXC MIPI Support
+#
+CONFIG_MXC_MIPI_CSI2=m
+
+#
+# MXC HDMI CEC (Consumer Electronics Control) support
+#
+# CONFIG_MXC_HDMI_CEC is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_USE_FOR_EXT23=y
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_FANOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS_XATTR is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_LOGFS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_PSTORE is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+CONFIG_RCU_CPU_STALL_VERBOSE=y
+# CONFIG_LKDTM is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_OC_ETM=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_CRYPTODEV is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_COUNT_THLD=255
+CONFIG_CRYPTO_DEV_FSL_CAAM_INTC_TIME_THLD=2048
+CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
+# CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_TEST is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE=7
+CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=y
+CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+# CONFIG_XZ_DEC is not set
+# CONFIG_XZ_DEC_BCJ is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CPU_RMAP=y
+CONFIG_NLATTR=y
+CONFIG_AVERAGE=y
diff --git a/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb b/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb
new file mode 100644
index 0000000..6ec2b8e
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb
@@ -0,0 +1,14 @@
+# Adapted from linux-imx.inc, copyright (C) 2013 O.S. Systems Software LTDA
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+require recipes-kernel/linux/linux-imx.inc
+
+DESCRIPTION = "Linux kernel for i.MX6 Mini PC TV Sticks"
+
+SRC_URI = "git://github.com/imx6-dongle/linux-imx.git \
+           file://defconfig"
+
+LOCALVERSION = "-1.1.0"
+SRCREV = "6ea2512fe2a5f002fb05eed90240f89ad3dcf62a"
+
+COMPATIBLE_MACHINE = "(mx6)"
-- 
1.8.3.2


[-- Attachment #4: 0001-u-boot-imx6dongle-Add-U-Boot-fork-of-i.MX6-Mini-PC-T.patch --]
[-- Type: application/octet-stream, Size: 2735 bytes --]

From 6e17fc1d225c54d314aebd0c9cae3d1ada8dff3d Mon Sep 17 00:00:00 2001
From: Otavio Salvador <otavio@ossystems.com.br>
Date: Sun, 28 Apr 2013 10:29:03 -0300
Subject: [PATCH 1/3] u-boot-imx6dongle: Add U-Boot fork of i.MX6 Mini PC TV
 Stick community

Change-Id: Ie30284ab21050f214ed944a96983345bd7575ea4
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
 .../0001-tools-Disable-imxboot-build.patch         | 30 ++++++++++++++++++++++
 recipes-bsp/u-boot/u-boot-imx6dongle_git.bb        | 17 ++++++++++++
 2 files changed, 47 insertions(+)
 create mode 100644 recipes-bsp/u-boot/u-boot-imx6dongle/0001-tools-Disable-imxboot-build.patch
 create mode 100644 recipes-bsp/u-boot/u-boot-imx6dongle_git.bb

diff --git a/recipes-bsp/u-boot/u-boot-imx6dongle/0001-tools-Disable-imxboot-build.patch b/recipes-bsp/u-boot/u-boot-imx6dongle/0001-tools-Disable-imxboot-build.patch
new file mode 100644
index 0000000..433abf8
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-imx6dongle/0001-tools-Disable-imxboot-build.patch
@@ -0,0 +1,30 @@
+From f454bdd5fc12f9e7411643ca2dc47e1c9f05d860 Mon Sep 17 00:00:00 2001
+From: Otavio Salvador <otavio@ossystems.com.br>
+Date: Sun, 28 Apr 2013 11:38:20 -0300
+Subject: [PATCH] tools: Disable imxboot build
+
+This should be handled by other external tools and avoid host binaries
+to be build in the target recipe.
+
+Upstream-Status: Inappropriate [configuration]
+
+Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
+---
+ tools/Makefile | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/tools/Makefile b/tools/Makefile
+index 22af577..a44ee1f 100644
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -73,7 +73,6 @@ BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
+ BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
+ BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
+ BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX)
+-BIN_FILES-$(CONFIG_MX6) += imxboot$(SFX)
+ 
+ # Source files which exist outside the tools directory
+ EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o
+-- 
+1.8.1
+
diff --git a/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb b/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
new file mode 100644
index 0000000..34c958d
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
@@ -0,0 +1,17 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
+COMPATIBLE_MACHINE = "(gk802)"
+
+PROVIDES = "u-boot"
+
+PV = "v2013.01+git${SRCPV}"
+
+SRCREV = "7a2d0586f5c3bc07dae8cc87f12c95118a02a7a5"
+SRC_URI = "git://github.com/imx6-dongle/uboot-imx6dongle.git \
+           file://0001-tools-Disable-imxboot-build.patch"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
-- 
1.8.3.2


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [meta-fsl-arm-extra][PATCH] gk802: Add initial support
  2013-07-30  8:00 [meta-fsl-arm-extra][PATCH] gk802: Add initial support Matthias Benesch
  2013-07-30 12:21 ` Otavio Salvador
@ 2013-07-30 16:39 ` Daiane Angolini
  2013-07-31  8:23   ` Matthias Benesch
  1 sibling, 1 reply; 7+ messages in thread
From: Daiane Angolini @ 2013-07-30 16:39 UTC (permalink / raw)
  To: Matthias Benesch; +Cc: meta-freescale

On 07/30/2013 05:00 AM, Matthias Benesch wrote:
> Hello,
> I would like to commit support for Zealz GK802 Freescale i.MX6 Quad Core
> device.
> The work is based on the information from
> https://github.com/imx6-dongle/wiki/wiki
>
> Unfortunately it is not complete yet. U-Boot is working and the device
> will load the kernel uImage from first fat partition. With the attached
> "ubootcmd" file copied to the first fat partition of your micro-sd card,
> the kernel will start completely, but will fail to init systemd (see
> attached "gk802-boot.log" file).
>
> I already tried several bootargs configuration via the ubootcmd file, up
> to following bootargs config without any further success:
>
> setenv bootargs 'console=ttymxc3,115200 consoleblank=0
> root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait
> rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'
>
> I hope for the communitie's support to be able to finalize this work and
> get the GK802 supported within Yocto.

Would it be "the classic DEVTMPS" problem?

Please, check if it's enabled on your kernel
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y



-- 
Daiane



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [meta-fsl-arm-extra][PATCH] gk802: Add initial support
  2013-07-30 16:39 ` Daiane Angolini
@ 2013-07-31  8:23   ` Matthias Benesch
  2013-07-31 16:47     ` Dmitriy B.
  0 siblings, 1 reply; 7+ messages in thread
From: Matthias Benesch @ 2013-07-31  8:23 UTC (permalink / raw)
  To: Daiane Angolini; +Cc: meta-freescale

On Tue, 2013-07-30 at 13:39 -0300, Daiane Angolini wrote:
> On 07/30/2013 05:00 AM, Matthias Benesch wrote:
> > Hello,
> > I would like to commit support for Zealz GK802 Freescale i.MX6 Quad Core
> > device.
> > The work is based on the information from
> > https://github.com/imx6-dongle/wiki/wiki
> >
> > Unfortunately it is not complete yet. U-Boot is working and the device
> > will load the kernel uImage from first fat partition. With the attached
> > "ubootcmd" file copied to the first fat partition of your micro-sd card,
> > the kernel will start completely, but will fail to init systemd (see
> > attached "gk802-boot.log" file).
> >
> > I already tried several bootargs configuration via the ubootcmd file, up
> > to following bootargs config without any further success:
> >
> > setenv bootargs 'console=ttymxc3,115200 consoleblank=0
> > root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait
> > rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'
> >
> > I hope for the communitie's support to be able to finalize this work and
> > get the GK802 supported within Yocto.
> 
> Would it be "the classic DEVTMPS" problem?
> 
> Please, check if it's enabled on your kernel
> CONFIG_DEVTMPFS=y
> CONFIG_DEVTMPFS_MOUNT=y
> 

The DEVTMPFS did it. Now it is starting including systemd ;-).

I can remember that I saw this issue within one of the forum discussions
before. 

I will update the patch accordingly.

Matthias




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [meta-fsl-arm-extra][PATCH] gk802: Add initial support
  2013-07-31  8:23   ` Matthias Benesch
@ 2013-07-31 16:47     ` Dmitriy B.
  2013-08-03 23:04       ` Matthias Benesch
  0 siblings, 1 reply; 7+ messages in thread
From: Dmitriy B. @ 2013-07-31 16:47 UTC (permalink / raw)
  To: Matthias Benesch; +Cc: meta-freescale

[-- Attachment #1: Type: text/plain, Size: 2452 bytes --]

Hi Matthias,

Some time ago me and guys interested in GK802 started the imx6-dongle
project - https://github.com/imx6-dongle You probably using kernel from
there.
It kinda stuck right now because the wave of interest in GK802 already
passed and guys with skills already done everything with it and lost
interest. If you want to have access to imx6-dongle repos - I can add you,
or merge your pull requests.
There a couple of things left to do - for example - port our hardware
support to 4.0.0 BSP or to 3.5.7 kernel in future.

Same also can be applied to anyone who wants to work on GK802 - you are
welcome.

Best Regards
Dmitriy Beykun

2013/7/31 Matthias Benesch <twoof7@freenet.de>

> On Tue, 2013-07-30 at 13:39 -0300, Daiane Angolini wrote:
> > On 07/30/2013 05:00 AM, Matthias Benesch wrote:
> > > Hello,
> > > I would like to commit support for Zealz GK802 Freescale i.MX6 Quad
> Core
> > > device.
> > > The work is based on the information from
> > > https://github.com/imx6-dongle/wiki/wiki
> > >
> > > Unfortunately it is not complete yet. U-Boot is working and the device
> > > will load the kernel uImage from first fat partition. With the attached
> > > "ubootcmd" file copied to the first fat partition of your micro-sd
> card,
> > > the kernel will start completely, but will fail to init systemd (see
> > > attached "gk802-boot.log" file).
> > >
> > > I already tried several bootargs configuration via the ubootcmd file,
> up
> > > to following bootargs config without any further success:
> > >
> > > setenv bootargs 'console=ttymxc3,115200 consoleblank=0
> > > root=/dev/mmcblk0p2 rootfstype=ext3 init=/lib/systemd/systemd rootwait
> > > rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'
> > >
> > > I hope for the communitie's support to be able to finalize this work
> and
> > > get the GK802 supported within Yocto.
> >
> > Would it be "the classic DEVTMPS" problem?
> >
> > Please, check if it's enabled on your kernel
> > CONFIG_DEVTMPFS=y
> > CONFIG_DEVTMPFS_MOUNT=y
> >
>
> The DEVTMPFS did it. Now it is starting including systemd ;-).
>
> I can remember that I saw this issue within one of the forum discussions
> before.
>
> I will update the patch accordingly.
>
> Matthias
>
>
> _______________________________________________
> meta-freescale mailing list
> meta-freescale@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/meta-freescale
>

[-- Attachment #2: Type: text/html, Size: 3452 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [meta-fsl-arm-extra][PATCH] gk802: Add initial support
  2013-07-31 16:47     ` Dmitriy B.
@ 2013-08-03 23:04       ` Matthias Benesch
  2013-08-04 19:01         ` Otavio Salvador
  0 siblings, 1 reply; 7+ messages in thread
From: Matthias Benesch @ 2013-08-03 23:04 UTC (permalink / raw)
  To: Dmitriy B.; +Cc: meta-freescale

[-- Attachment #1: Type: text/plain, Size: 3301 bytes --]

On Wed, 2013-07-31 at 20:47 +0400, Dmitriy B. wrote:
> Hi Matthias,
> 
> 
> Some time ago me and guys interested in GK802 started the imx6-dongle
> project - https://github.com/imx6-dongle You probably using kernel
> from there.
> It kinda stuck right now because the wave of interest in GK802 already
> passed and guys with skills already done everything with it and lost
> interest. If you want to have access to imx6-dongle repos - I can add
> you, or merge your pull requests.
> There a couple of things left to do - for example - port our hardware
> support to 4.0.0 BSP or to 3.5.7 kernel in future.
> 
> 
> Same also can be applied to anyone who wants to work on GK802 - you
> are welcome.
> 
> 
> Best Regards
> Dmitriy Beykun
> 
> 
> 2013/7/31 Matthias Benesch <twoof7@freenet.de>
>         On Tue, 2013-07-30 at 13:39 -0300, Daiane Angolini wrote:
>         > On 07/30/2013 05:00 AM, Matthias Benesch wrote:
>         > > Hello,
>         > > I would like to commit support for Zealz GK802 Freescale
>         i.MX6 Quad Core
>         > > device.
>         > > The work is based on the information from
>         > > https://github.com/imx6-dongle/wiki/wiki
>         > >
>         > > Unfortunately it is not complete yet. U-Boot is working
>         and the device
>         > > will load the kernel uImage from first fat partition. With
>         the attached
>         > > "ubootcmd" file copied to the first fat partition of your
>         micro-sd card,
>         > > the kernel will start completely, but will fail to init
>         systemd (see
>         > > attached "gk802-boot.log" file).
>         > >
>         > > I already tried several bootargs configuration via the
>         ubootcmd file, up
>         > > to following bootargs config without any further success:
>         > >
>         > > setenv bootargs 'console=ttymxc3,115200 consoleblank=0
>         > > root=/dev/mmcblk0p2 rootfstype=ext3
>         init=/lib/systemd/systemd rootwait
>         > > rw video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24'
>         > >
>         > > I hope for the communitie's support to be able to finalize
>         this work and
>         > > get the GK802 supported within Yocto.
>         >
>         > Would it be "the classic DEVTMPS" problem?
>         >
>         > Please, check if it's enabled on your kernel
>         > CONFIG_DEVTMPFS=y
>         > CONFIG_DEVTMPFS_MOUNT=y
>         >
>         
>         
>         The DEVTMPFS did it. Now it is starting including systemd ;-).
>         
>         I can remember that I saw this issue within one of the forum
>         discussions
>         before.
>         
>         I will update the patch accordingly.
>         
>         Matthias
>         
>         
>         _______________________________________________
>         meta-freescale mailing list
>         meta-freescale@yoctoproject.org
>         https://lists.yoctoproject.org/listinfo/meta-freescale
>         
> 

I added the DEVTMPFS configuration to the gk802 defconfig and fixed some
issues within uboot config file gk802.h. The gk802 is now booting.

Attached the respective patch.

@Otavio: How do we proceed with the awaiting u-boot upstream for gk802?

Matthias

[-- Attachment #2: 0001-gk802-Add-initial-support.patch --]
[-- Type: text/x-patch, Size: 7796 bytes --]

From 5b07f7d32f2457cb5293fb22d4f37243957f0c35 Mon Sep 17 00:00:00 2001
From: Matthias Benesch <twoof7@freenet.de>
Date: Sat, 3 Aug 2013 15:51:05 -0700
Subject: [meta-fsl-arm-extra][PATCH] gk802: Add initial support

Signed-off-by: Matthias Benesch <twoof7@freenet.de>
---
 conf/machine/gk802.conf                            | 19 ++++++++++
 ...hange-default-environment-to-work-with-OE.patch | 41 ++++++++++++++++++++
 recipes-bsp/u-boot/u-boot-imx6dongle_git.bb        | 16 ++++++++
 ...nfig-Enable-DEVTMPFS-EXT2-and-EXT3-suppor.patch | 44 ++++++++++++++++++++++
 recipes-kernel/linux/linux-imx6dongle_3.0.35.bb    | 34 +++++++++++++++++
 5 files changed, 154 insertions(+)
 create mode 100644 conf/machine/gk802.conf
 create mode 100644 recipes-bsp/u-boot/u-boot-imx6dongle/0001-gk802-Change-default-environment-to-work-with-OE.patch
 create mode 100644 recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
 create mode 100644 recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-gk802-defconfig-Enable-DEVTMPFS-EXT2-and-EXT3-suppor.patch
 create mode 100644 recipes-kernel/linux/linux-imx6dongle_3.0.35.bb

diff --git a/conf/machine/gk802.conf b/conf/machine/gk802.conf
new file mode 100644
index 0000000..14ff01e
--- /dev/null
+++ b/conf/machine/gk802.conf
@@ -0,0 +1,19 @@
+#@TYPE: Machine
+#@NAME: Zealz GK802
+#@SOC: i.MX6Q
+#@DESCRIPTION: Machine configuration for Zealz GK802
+
+include conf/machine/include/imx-base.inc
+include conf/machine/include/tune-cortexa9.inc
+
+SOC_FAMILY = "mx6:mx6q"
+
+PREFERRED_PROVIDER_u-boot = "u-boot-imx6dongle"
+PREFERRED_PROVIDER_virtual/kernel = "linux-imx6dongle"
+
+UBOOT_MACHINE = "gk802_config"
+
+SERIAL_CONSOLE = "115200 ttymxc3"
+
+MACHINE_FEATURES += " pci wifi bluetooth"
+
diff --git a/recipes-bsp/u-boot/u-boot-imx6dongle/0001-gk802-Change-default-environment-to-work-with-OE.patch b/recipes-bsp/u-boot/u-boot-imx6dongle/0001-gk802-Change-default-environment-to-work-with-OE.patch
new file mode 100644
index 0000000..6e1779d
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-imx6dongle/0001-gk802-Change-default-environment-to-work-with-OE.patch
@@ -0,0 +1,41 @@
+From 2983c330eaf49a9d6f8cba9379c4c9ba4b92e4df Mon Sep 17 00:00:00 2001
+From: Matthias Benesch <twoof7@freenet.de>
+Date: Sat, 3 Aug 2013 15:28:32 -0700
+Subject: [PATCH] gk802: Change default environment to work with OE
+
+Signed-off-by: Matthias Benesch <twoof7@freenet.de>
+---
+ include/configs/gk802.h | 12 +++++++++---
+ 1 file changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/include/configs/gk802.h b/include/configs/gk802.h
+index a84f16b..b7bc8ee 100644
+--- a/include/configs/gk802.h
++++ b/include/configs/gk802.h
+@@ -109,14 +109,20 @@
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ 	"script=boot.scr\0" \
+-	"uimage=/boot/uImage\0" \
++	"uimage=uImage\0" \
+ 	"console=" CONFIG_CONSOLE_DEV "\0" \
++	"mmcpart=1\0" \
++	"mmcroot=/dev/mmcblk0p2 rw\0" \
++	"mmcrootfstype=ext3 rootwait\0" \
++	"mmcargs=setenv bootargs ${bootargs} console=${console},${baudrate} " \
++		"root=${mmcroot} " \
++		"rootfstype=${mmcrootfstype}\0" \
+ 	"fdt_high=0xffffffff\0"	  \
+ 	"initrd_high=0xffffffff\0" \
+     "boot_recovery=setenv bootsuffix _recovery; setenv mmcdev 1; run try_boot; setenv mmcdev 0; run try_boot; run boot_normal\0" \
+     "boot_normal=  setenv bootsuffix ''; setenv mmcdev 1; run try_boot; setenv mmcdev 0; run try_boot\0" \
+-    "try_boot=if ext2load mmc ${mmcdev} ${loadaddr} /boot/ubootcmd${bootsuffix}; then source; fi;" \
+-    "         if ext2load mmc ${mmcdev} ${loadaddr} /boot/uImage${bootsuffix}; then bootm; fi;\0"
++    "try_boot=if fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script}${bootsuffix}; then source; fi;" \
++    "         if fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}${bootsuffix}; then run mmcargs; bootm; fi;\0"
+ 
+ 
+ 
+-- 
+1.8.3.4
+
diff --git a/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb b/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
new file mode 100644
index 0000000..f4780fc
--- /dev/null
+++ b/recipes-bsp/u-boot/u-boot-imx6dongle_git.bb
@@ -0,0 +1,16 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
+COMPATIBLE_MACHINE = "(gk802)"
+
+PROVIDES = "u-boot"
+
+SRCREV = "7a2d0586f5c3bc07dae8cc87f12c95118a02a7a5"
+SRC_URI = "git://github.com/imx6-dongle/uboot-imx6dongle.git \
+           file://0001-gk802-Change-default-environment-to-work-with-OE.patch \
+"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-gk802-defconfig-Enable-DEVTMPFS-EXT2-and-EXT3-suppor.patch b/recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-gk802-defconfig-Enable-DEVTMPFS-EXT2-and-EXT3-suppor.patch
new file mode 100644
index 0000000..5ed4de2
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx6dongle-3.0.35/0001-gk802-defconfig-Enable-DEVTMPFS-EXT2-and-EXT3-suppor.patch
@@ -0,0 +1,44 @@
+From e0e5d663137576b1b7f46e41e403f0496d6ec2a5 Mon Sep 17 00:00:00 2001
+From: Matthias Benesch <twoof7@freenet.de>
+Date: Fri, 2 Aug 2013 00:41:35 -0700
+Subject: [PATCH] gk802 defconfig: Enable DEVTMPFS, EXT2 and EXT3 support
+
+Signed-off-by: Matthias Benesch <twoof7@freenet.de>
+---
+ arch/arm/configs/imx6_gk802_defconfig | 13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/configs/imx6_gk802_defconfig b/arch/arm/configs/imx6_gk802_defconfig
+index da72294..f3de0fb 100644
+--- a/arch/arm/configs/imx6_gk802_defconfig
++++ b/arch/arm/configs/imx6_gk802_defconfig
+@@ -686,7 +686,8 @@ CONFIG_RFKILL_INPUT=y
+ # Generic Driver Options
+ #
+ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+-# CONFIG_DEVTMPFS is not set
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
+ CONFIG_STANDALONE=y
+ CONFIG_PREVENT_FIRMWARE_BUILD=y
+ CONFIG_FW_LOADER=y
+@@ -2432,8 +2433,14 @@ CONFIG_MXC_MIPI_CSI2=m
+ #
+ # File systems
+ #
+-# CONFIG_EXT2_FS is not set
+-# CONFIG_EXT3_FS is not set
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
++CONFIG_EXT3_FS_XATTR=y
++# CONFIG_EXT3_FS_POSIX_ACL is not set
++# CONFIG_EXT3_FS_SECURITY is not set
+ CONFIG_EXT4_FS=y
+ CONFIG_EXT4_USE_FOR_EXT23=y
+ CONFIG_EXT4_FS_XATTR=y
+-- 
+1.8.3.4
+
diff --git a/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb b/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb
new file mode 100644
index 0000000..a934f0c
--- /dev/null
+++ b/recipes-kernel/linux/linux-imx6dongle_3.0.35.bb
@@ -0,0 +1,34 @@
+# Adapted from linux-imx.inc, copyright (C) 2013 O.S. Systems Software LTDA
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+require recipes-kernel/linux/linux-imx.inc
+
+DESCRIPTION = "Linux kernel for Zealz GK802"
+
+PR = "${INC_PR}.1"
+
+COMPATIBLE_MACHINE = "(mx6)"
+
+SRC_URI = "git://github.com/imx6-dongle/linux-imx.git;branch=imx_3.0.35_1.1.0-hdmidongle \
+           file://0001-gk802-defconfig-Enable-DEVTMPFS-EXT2-and-EXT3-suppor.patch \
+"
+
+SRCREV = "899792c5fa2f1fe6919366d5ccc4d33f419012bf"
+
+LOCALVERSION = "-imx6dongle+yocto"
+
+#KERNEL_DEFCONFIG = "imx6_hdmidongle_defconfig"
+KERNEL_DEFCONFIG = "imx6_gk802_defconfig"
+
+do_configure_prepend() {
+	cp ${S}/arch/arm/configs/${KERNEL_DEFCONFIG} ${S}/.config
+	cp ${S}/arch/arm/configs/${KERNEL_DEFCONFIG} ${S}/../defconfig
+
+	kernel_conf_variable LOCALVERSION "\"${LOCALVERSION}\""
+	kernel_conf_variable LOCALVERSION_AUTO y
+
+	# Add GIT revision to the local version
+	head=`git rev-parse --verify --short HEAD 2> /dev/null`
+	printf "%s%s" +g $head > ${S}/.scmversion
+}
+
-- 
1.8.3.4


^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [meta-fsl-arm-extra][PATCH] gk802: Add initial support
  2013-08-03 23:04       ` Matthias Benesch
@ 2013-08-04 19:01         ` Otavio Salvador
  0 siblings, 0 replies; 7+ messages in thread
From: Otavio Salvador @ 2013-08-04 19:01 UTC (permalink / raw)
  To: Matthias Benesch; +Cc: meta-freescale

On Sat, Aug 3, 2013 at 8:04 PM, Matthias Benesch <twoof7@freenet.de> wrote:
> I added the DEVTMPFS configuration to the gk802 defconfig and fixed some
> issues within uboot config file gk802.h. The gk802 is now booting.
>
> Attached the respective patch.
>
> @Otavio: How do we proceed with the awaiting u-boot upstream for gk802?

Ok; let's work to get it merged here in meanwhile.

I did a fast review in the attached file and I have following remarks:

 - please send patches using git send-email (as it easy review);
 - split the patches (u-boot, kernel, machine);
 - add a defconfig file to easy user customization (pass it on
savedefconfig make target);

After rework the patch, please send the three patches to mailing list
and we review them again.

Good work. :-)

-- 
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2013-08-04 19:01 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-07-30  8:00 [meta-fsl-arm-extra][PATCH] gk802: Add initial support Matthias Benesch
2013-07-30 12:21 ` Otavio Salvador
2013-07-30 16:39 ` Daiane Angolini
2013-07-31  8:23   ` Matthias Benesch
2013-07-31 16:47     ` Dmitriy B.
2013-08-03 23:04       ` Matthias Benesch
2013-08-04 19:01         ` Otavio Salvador

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.