* [Buildroot] buildroot 2019.11.1 rpi-0-w error
@ 2020-02-28 12:03 Laurentiu-Cristian Duca
2020-02-28 12:52 ` Peter Seiderer
0 siblings, 1 reply; 4+ messages in thread
From: Laurentiu-Cristian Duca @ 2020-02-28 12:03 UTC (permalink / raw)
To: buildroot
Hi,
I am facing the following error in buildroot 2019.11.1
when configuring buildroot for rpi-0-w
with this settings:
make menuconfig
Kernel
Defconfig name (bcm2835)
In-tree Device Tree Source file names (bcm2835-rpi-zero-w)
make
>>> Executing post-image script board/raspberrypi0w/post-image.sh
INFO: cmd: "mkdir -p
"/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
(stderr):
INFO: cmd: "rm -rf
"/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp"/*"
(stderr):
INFO: cmd: "mkdir -p
"/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
(stderr):
INFO: cmd: "cp -a "/tmp/tmp.iaBv2bX7fQ"
"/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root""
(stderr):
INFO: cmd: "find
'/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.iaBv2bX7fQ/{}'
'/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root/{}'"
(stderr):
ERROR: file(bcm2708-rpi-zero-w.dtb):
stat(/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/images/bcm2708-rpi-zero-w.dtb)
failed: No such file or directory
ERROR: vfat(boot.vfat): could not setup bcm2708-rpi-zero-w.dtb
If I rename bcm2835-rpi-zero-w.dtb to bcm2708-rpi-zero-w.dtb in output/images,
the build succeeds but linux does not boot.
Any ideas?
Thanks
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] buildroot 2019.11.1 rpi-0-w error
2020-02-28 12:03 [Buildroot] buildroot 2019.11.1 rpi-0-w error Laurentiu-Cristian Duca
@ 2020-02-28 12:52 ` Peter Seiderer
2020-02-28 13:51 ` Laurentiu-Cristian Duca
0 siblings, 1 reply; 4+ messages in thread
From: Peter Seiderer @ 2020-02-28 12:52 UTC (permalink / raw)
To: buildroot
Hello Laurentiu-Cristian,
On Fri, 28 Feb 2020 14:03:45 +0200, Laurentiu-Cristian Duca <laurentiu.duca@gmail.com> wrote:
> Hi,
>
> I am facing the following error in buildroot 2019.11.1
> when configuring buildroot for rpi-0-w
> with this settings:
>
> make menuconfig
> Kernel
> Defconfig name (bcm2835)
> In-tree Device Tree Source file names (bcm2835-rpi-zero-w)
>
> make
> >>> Executing post-image script board/raspberrypi0w/post-image.sh
> INFO: cmd: "mkdir -p
> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
> (stderr):
> INFO: cmd: "rm -rf
> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp"/*"
> (stderr):
> INFO: cmd: "mkdir -p
> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
> (stderr):
> INFO: cmd: "cp -a "/tmp/tmp.iaBv2bX7fQ"
> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root""
> (stderr):
> INFO: cmd: "find
> '/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root'
> -depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
> '/tmp/tmp.iaBv2bX7fQ/{}'
> '/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root/{}'"
> (stderr):
> ERROR: file(bcm2708-rpi-zero-w.dtb):
> stat(/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/images/bcm2708-rpi-zero-w.dtb)
> failed: No such file or directory
> ERROR: vfat(boot.vfat): could not setup bcm2708-rpi-zero-w.dtb
>
> If I rename bcm2835-rpi-zero-w.dtb to bcm2708-rpi-zero-w.dtb in output/images,
> the build succeeds but linux does not boot.
>
According to configs/raspberrypi0w_defconfig the DTS name should
be 'bcm2708-rpi-zero-w' (or 'bcm2708-rpi-0-w' prior to [1], [2])
and the defconfig name should be 'bcmrpi'?
Does the plain raspberrypi0w_defconfig work for you?
Which linux kernel do you use (in doubt send your .config or defconfig file)?
Regards,
Peter
[1] https://git.buildroot.net/buildroot/commit/?id=42d22f3bdba41da8e6b6ace2c78af2b3e34d7491
[2] https://git.buildroot.net/buildroot/commit/?id=fcecfb66d1fb749426306dbea50fdeb37d4706d8
> Any ideas?
>
> Thanks
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] buildroot 2019.11.1 rpi-0-w error
2020-02-28 12:52 ` Peter Seiderer
@ 2020-02-28 13:51 ` Laurentiu-Cristian Duca
2020-02-28 14:18 ` Peter Seiderer
0 siblings, 1 reply; 4+ messages in thread
From: Laurentiu-Cristian Duca @ 2020-02-28 13:51 UTC (permalink / raw)
To: buildroot
Hi,
On 2/28/20, Peter Seiderer <ps.report@gmx.net> wrote:
> Hello Laurentiu-Cristian,
>
> On Fri, 28 Feb 2020 14:03:45 +0200, Laurentiu-Cristian Duca
> <laurentiu.duca@gmail.com> wrote:
>
>> Hi,
>>
>> I am facing the following error in buildroot 2019.11.1
>> when configuring buildroot for rpi-0-w
>> with this settings:
>>
>> make menuconfig
>> Kernel
>> Defconfig name (bcm2835)
>> In-tree Device Tree Source file names (bcm2835-rpi-zero-w)
>>
>> make
>> >>> Executing post-image script board/raspberrypi0w/post-image.sh
>> INFO: cmd: "mkdir -p
>> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
>> (stderr):
>> INFO: cmd: "rm -rf
>> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp"/*"
>> (stderr):
>> INFO: cmd: "mkdir -p
>> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
>> (stderr):
>> INFO: cmd: "cp -a "/tmp/tmp.iaBv2bX7fQ"
>> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root""
>> (stderr):
>> INFO: cmd: "find
>> '/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root'
>> -depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
>> '/tmp/tmp.iaBv2bX7fQ/{}'
>> '/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root/{}'"
>> (stderr):
>> ERROR: file(bcm2708-rpi-zero-w.dtb):
>> stat(/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/images/bcm2708-rpi-zero-w.dtb)
>> failed: No such file or directory
>> ERROR: vfat(boot.vfat): could not setup bcm2708-rpi-zero-w.dtb
>>
>> If I rename bcm2835-rpi-zero-w.dtb to bcm2708-rpi-zero-w.dtb in
>> output/images,
>> the build succeeds but linux does not boot.
>>
>
> According to configs/raspberrypi0w_defconfig the DTS name should
> be 'bcm2708-rpi-zero-w' (or 'bcm2708-rpi-0-w' prior to [1], [2])
> and the defconfig name should be 'bcmrpi'?
>
> Does the plain raspberrypi0w_defconfig work for you?
Yes, it works. But only works with rpi linux.
I wanted to use linux mainline kernel compiled separately
and that is why I tried to use
bcm2835-rpi-zero-w.dts because mainline kernel does not have bcm2708...dts
Thanks
>
> Which linux kernel do you use (in doubt send your .config or defconfig
> file)?
>
> Regards,
> Peter
>
> [1]
> https://git.buildroot.net/buildroot/commit/?id=42d22f3bdba41da8e6b6ace2c78af2b3e34d7491
> [2]
> https://git.buildroot.net/buildroot/commit/?id=fcecfb66d1fb749426306dbea50fdeb37d4706d8
>
>> Any ideas?
>>
>> Thanks
>> _______________________________________________
>> buildroot mailing list
>> buildroot at busybox.net
>> http://lists.busybox.net/mailman/listinfo/buildroot
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] buildroot 2019.11.1 rpi-0-w error
2020-02-28 13:51 ` Laurentiu-Cristian Duca
@ 2020-02-28 14:18 ` Peter Seiderer
0 siblings, 0 replies; 4+ messages in thread
From: Peter Seiderer @ 2020-02-28 14:18 UTC (permalink / raw)
To: buildroot
Hello Laurentiu-Cristian,
On Fri, 28 Feb 2020 15:51:44 +0200, Laurentiu-Cristian Duca <laurentiu.duca@gmail.com> wrote:
> Hi,
>
> On 2/28/20, Peter Seiderer <ps.report@gmx.net> wrote:
> >
> >
> > On Fri, 28 Feb 2020 14:03:45 +0200, Laurentiu-Cristian Duca
> > <laurentiu.duca@gmail.com> wrote:
> >
> >> Hi,
> >>
> >> I am facing the following error in buildroot 2019.11.1
> >> when configuring buildroot for rpi-0-w
> >> with this settings:
> >>
> >> make menuconfig
> >> Kernel
> >> Defconfig name (bcm2835)
> >> In-tree Device Tree Source file names (bcm2835-rpi-zero-w)
> >>
> >> make
> >> >>> Executing post-image script board/raspberrypi0w/post-image.sh
> >> INFO: cmd: "mkdir -p
> >> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
> >> (stderr):
> >> INFO: cmd: "rm -rf
> >> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp"/*"
> >> (stderr):
> >> INFO: cmd: "mkdir -p
> >> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp""
> >> (stderr):
> >> INFO: cmd: "cp -a "/tmp/tmp.iaBv2bX7fQ"
> >> "/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root""
> >> (stderr):
> >> INFO: cmd: "find
> >> '/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root'
> >> -depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
> >> '/tmp/tmp.iaBv2bX7fQ/{}'
> >> '/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/build/genimage.tmp/root/{}'"
> >> (stderr):
> >> ERROR: file(bcm2708-rpi-zero-w.dtb):
> >> stat(/home/laur/lucru/raspberry-pi/buildroot/buildroot-2019.11.rpi/output/images/bcm2708-rpi-zero-w.dtb)
> >> failed: No such file or directory
> >> ERROR: vfat(boot.vfat): could not setup bcm2708-rpi-zero-w.dtb
> >>
> >> If I rename bcm2835-rpi-zero-w.dtb to bcm2708-rpi-zero-w.dtb in
> >> output/images,
> >> the build succeeds but linux does not boot.
> >>
> >
> > According to configs/raspberrypi0w_defconfig the DTS name should
> > be 'bcm2708-rpi-zero-w' (or 'bcm2708-rpi-0-w' prior to [1], [2])
> > and the defconfig name should be 'bcmrpi'?
> >
> > Does the plain raspberrypi0w_defconfig work for you?
> Yes, it works. But only works with rpi linux.
> I wanted to use linux mainline kernel compiled separately
> and that is why I tried to use
> bcm2835-rpi-zero-w.dts because mainline kernel does not have bcm2708...dts
Then do not forget to change board/raspberrypi/genimage-raspberrypi0w.cfg:
--- a/board/raspberrypi/genimage-raspberrypi0w.cfg
+++ b/board/raspberrypi/genimage-raspberrypi0w.cfg
@@ -1,7 +1,7 @@
image boot.vfat {
vfat {
files = {
- "bcm2708-rpi-zero-w.dtb",
+ "bcm2835-rpi-zero-w.dtb",
"rpi-firmware/bootcode.bin",
"rpi-firmware/cmdline.txt",
"rpi-firmware/config.txt",
And according to [3], [4] you need to add kernel and DTB file to /boot/config.txt,
e.g.:
kernel=zImage
device_tree=bcm2835-rpi-zero-w.dtb
[3] https://www.collabora.com/news-and-blog/blog/2019/03/12/quick-hack-raspberry-pi-meets-linux-kernel-mainline/
[4] https://wiki.gentoo.org/wiki/Raspberry_Pi/Mainline_Kernel
>
> Thanks
>
> >
> > Which linux kernel do you use (in doubt send your .config or defconfig
> > file)?
> >
> > Regards,
> > Peter
> >
> > [1]
> > https://git.buildroot.net/buildroot/commit/?id=42d22f3bdba41da8e6b6ace2c78af2b3e34d7491
> > [2]
> > https://git.buildroot.net/buildroot/commit/?id=fcecfb66d1fb749426306dbea50fdeb37d4706d8
> >
> >> Any ideas?
> >>
> >> Thanks
> >> _______________________________________________
> >> buildroot mailing list
> >> buildroot at busybox.net
> >> http://lists.busybox.net/mailman/listinfo/buildroot
> >
> >
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-02-28 14:18 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-28 12:03 [Buildroot] buildroot 2019.11.1 rpi-0-w error Laurentiu-Cristian Duca
2020-02-28 12:52 ` Peter Seiderer
2020-02-28 13:51 ` Laurentiu-Cristian Duca
2020-02-28 14:18 ` Peter Seiderer
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.