* Crashed filesystem, nothing helps
@ 2017-08-02 8:27 Thomas Wurfbaum
2017-08-02 8:29 ` Thomas Wurfbaum
2017-08-02 9:07 ` Hugo Mills
0 siblings, 2 replies; 9+ messages in thread
From: Thomas Wurfbaum @ 2017-08-02 8:27 UTC (permalink / raw)
To: linux-btrfs
Hello,
Yesterday morning i recognized a hard reboot of my system, but the /data
filesystem was
not possible to mount.
mainframe:~ # uname -a
Linux mainframe 4.11.8-2-default #1 SMP PREEMPT Thu Jun 29 14:37:33 UTC 2017
(42bd7a0) x86_64 x86_64 x86_64 GNU/Linux
mainframe:~ # btrfs --version
btrfs-progs v4.10.2+20170406
mainframe:~ # btrfs fi show
Label: none uuid: 22aaaa76-0885-4683-ac04-477c27cfab80
Total devices 1 FS bytes used 2.88TiB
devid 1 size 4.53TiB used 2.92TiB path /dev/sdb1
mainframe:~ # btrfs restore /dev/sdb1 /mnt
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
Ignoring transid failure
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
Ignoring transid failure
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
Ignoring transid failure
mainframe:~ # mount /dev/sdb1 /data
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
mainframe:~ # mount -o usebackuproot /dev/sdb1 /data
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
mainframe:~ # btrfs check /dev/sdb1
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
Ignoring transid failure
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
Ignoring transid failure
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
Ignoring transid failure
Checking filesystem on /dev/sdb1
UUID: 22aaaa76-0885-4683-ac04-477c27cfab80
checking extents
parent transid verify failed on 290766848 wanted 1486826 found 1486085
parent transid verify failed on 290766848 wanted 1486826 found 1486085
parent transid verify failed on 290766848 wanted 1486826 found 1486085
parent transid verify failed on 290766848 wanted 1486826 found 1486085
Ignoring transid failure
parent transid verify failed on 292339712 wanted 1486826 found 1486086
parent transid verify failed on 292339712 wanted 1486826 found 1486086
parent transid verify failed on 291078144 wanted 1486826 found 1486085
parent transid verify failed on 291078144 wanted 1486826 found 1486085
parent transid verify failed on 291078144 wanted 1486826 found 1486085
parent transid verify failed on 291078144 wanted 1486826 found 1486085
Ignoring transid failure
parent transid verify failed on 292978688 wanted 1486826 found 1486086
parent transid verify failed on 292978688 wanted 1486826 found 1486086
parent transid verify failed on 292978688 wanted 1486826 found 1486086
parent transid verify failed on 292978688 wanted 1486826 found 1486086
Ignoring transid failure
parent transid verify failed on 292519936 wanted 1486826 found 1486086
parent transid verify failed on 292519936 wanted 1486826 found 1486086
parent transid verify failed on 292536320 wanted 1486826 found 1486086
parent transid verify failed on 292536320 wanted 1486826 found 1486086
parent transid verify failed on 292552704 wanted 1486826 found 1486086
parent transid verify failed on 292552704 wanted 1486826 found 1486086
parent transid verify failed on 292585472 wanted 1486826 found 1486086
parent transid verify failed on 292585472 wanted 1486826 found 1486086
parent transid verify failed on 292585472 wanted 1486826 found 1486086
parent transid verify failed on 292585472 wanted 1486826 found 1486086
Ignoring transid failure
parent transid verify failed on 290766848 wanted 1486826 found 1486085
Ignoring transid failure
leaf parent key incorrect 290766848
bad block 290766848
ERROR: errors found in extent allocation tree or chunk allocation
parent transid verify failed on 290766848 wanted 1486826 found 1486085
Ignoring transid failure
leaf parent key incorrect 290766848
ERROR: failed to repair root items: Operation not permitted
mainframe:~ # btrfs rescue super-recover /dev/sdb1
All supers are valid, no need to recover
mainframe:~ # btrfs rescue zero-log /dev/sdb1
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
Ignoring transid failure
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
Ignoring transid failure
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
Ignoring transid failure
Clearing log on /dev/sdb1, previous log_root 0, level 0
parent transid verify failed on 29474816 wanted 1486833 found 1486837
Ignoring transid failure
leaf parent key incorrect 29474816
disk-io.c:524: update_cowonly_root: BUG_ON `ret` triggered, value -1
btrfs(+0x26304)[0x555686369304]
btrfs(btrfs_commit_transaction+0x98)[0x55568636aed8]
btrfs(+0x69efa)[0x5556863acefa]
btrfs(main+0x84)[0x555686361e34]
/lib64/libc.so.6(__libc_start_main+0xf1)[0x7f43653df291]
btrfs(_start+0x2a)[0x555686361f4a]
Aborted (core dumped)
mainframe:~ # btrfs rescue chunk-recover /dev/sdb1
This command still runs, even after 15 hours.
Is there anything else i could do?
Regards,
Thomas
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 8:27 Crashed filesystem, nothing helps Thomas Wurfbaum
@ 2017-08-02 8:29 ` Thomas Wurfbaum
2017-08-02 9:07 ` Hugo Mills
1 sibling, 0 replies; 9+ messages in thread
From: Thomas Wurfbaum @ 2017-08-02 8:29 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 50 bytes --]
Please find attached my dmesg.log
Regards,
Thomas
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 74235 bytes --]
[ 0.000000] Linux version 4.11.8-2-default (geeko@buildhost) (gcc version 7.1.1 20170629 [gcc-7-branch revision 249772] (SUSE Linux) ) #1 SMP PREEMPT Thu Jun 29 14:37:33 UTC 2017 (42bd7a0)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.8-2-default root=UUID=6b92e93a-86f2-4007-b374-4c7ad6a57063 resume=/dev/disk/by-id/scsi-1AMCC_J0827296748EC30067A8-part2 splash=silent quiet showopts
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfeaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfeb0000-0x00000000bfee2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00BFF00000 mask FFFFF00000 uncachable
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000240000000 aka 9216M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6040-0x000f604f] mapped at [ffff8808000f6040]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880800098000] 98000 size 24576
[ 0.000000] BRK [0x1b3269000, 0x1b3269fff] PGTABLE
[ 0.000000] BRK [0x1b326a000, 0x1b326afff] PGTABLE
[ 0.000000] BRK [0x1b326b000, 0x1b326bfff] PGTABLE
[ 0.000000] BRK [0x1b326c000, 0x1b326cfff] PGTABLE
[ 0.000000] BRK [0x1b326d000, 0x1b326dfff] PGTABLE
[ 0.000000] BRK [0x1b326e000, 0x1b326efff] PGTABLE
[ 0.000000] BRK [0x1b326f000, 0x1b326ffff] PGTABLE
[ 0.000000] BRK [0x1b3270000, 0x1b3270fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36b91000-0x375bffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F20 000024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 0x00000000BFEE3100 000054 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFEEB480 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20170119/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20170119/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20170119/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20170119/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20170119/tbfadt-603)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20170119/tbfadt-708)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20170119/tbfadt-708)
[ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20170119/tbfadt-708)
[ 0.000000] ACPI: DSDT 0x00000000BFEE3280 008189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 0x00000000BFEB0000 000040
[ 0.000000] ACPI: FACS 0x00000000BFEB0000 000040
[ 0.000000] ACPI: TCPA 0x00000000BFEEB6C0 000032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFEEB740 000350 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 0x00000000BFEEBB00 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 0x00000000BFEEBB80 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFEEB5C0 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23ffe6000-0x23fffbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bfeaffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[ 0.000000] On node 0 totalpages: 2096717
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12219 pages used for memmap
[ 0.000000] DMA32 zone: 782000 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310720 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfeb0000-0xbfee2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xbff00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 38 pages/cpu @ffff880a3fc00000 s117464 r8192 d29992 u524288
[ 0.000000] pcpu-alloc: s117464 r8192 d29992 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2063933
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.8-2-default root=UUID=6b92e93a-86f2-4007-b374-4c7ad6a57063 resume=/dev/disk/by-id/scsi-1AMCC_J0827296748EC30067A8-part2 splash=silent quiet showopts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xb4000000-0xb5ffffff] (32MB)
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 5361668K/8386868K available (7448K kernel code, 1307K rwdata, 5256K rodata, 1828K init, 1340K bss, 292744K reserved, 0K cma-reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3214.549 MHz processor
[ 0.004000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.09 BogoMIPS (lpj=12858196)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170119
[ 0.017142] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.017190] Security Framework initialized
[ 0.017209] AppArmor: AppArmor initialized
[ 0.017727] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021535] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.023352] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023362] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.023683] CPU: Physical Processor ID: 0
[ 0.023684] CPU: Processor Core ID: 0
[ 0.023685] mce: CPU supports 5 MCE banks
[ 0.023691] LVT offset 0 assigned for vector 0xf9
[ 0.023693] process: using AMD E400 aware idle routine
[ 0.023694] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.023695] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[ 0.023812] Freeing SMP alternatives memory: 28K
[ 0.025800] ftrace: allocating 29398 entries in 115 pages
[ 0.032133] smpboot: Max logical packages: 2
[ 0.032658] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076000] smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (family: 0xf, model: 0x43, stepping: 0x3)
[ 0.088009] Performance Events: AMD PMU driver.
[ 0.088013] ... version: 0
[ 0.088014] ... bit width: 48
[ 0.088015] ... generic registers: 4
[ 0.088015] ... value mask: 0000ffffffffffff
[ 0.088016] ... max period: 00007fffffffffff
[ 0.088016] ... fixed-purpose events: 0
[ 0.088017] ... event mask: 000000000000000f
[ 0.112057] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120002] smp: Bringing up secondary CPUs ...
[ 0.152035] x86: Booting SMP configuration:
[ 0.152036] .... node #0, CPUs: #1
[ 0.232062] smp: Brought up 1 node, 2 CPUs
[ 0.232062] smpboot: Total of 2 processors activated (12858.36 BogoMIPS)
[ 0.255305] node 0 initialised, 683114 pages in 20ms
[ 0.255332] devtmpfs: initialized
[ 0.255332] x86/mm: Memory block size: 128MB
[ 0.259680] PM: Registering ACPI NVS region [mem 0xbfeb0000-0xbfee2fff] (208896 bytes)
[ 0.259680] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.259680] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.259680] pinctrl core: initialized pinctrl subsystem
[ 0.259680] RTC time: 16:15:45, date: 08/01/17
[ 0.259680] NET: Registered protocol family 16
[ 0.260177] cpuidle: using governor ladder
[ 0.260177] cpuidle: using governor menu
[ 0.260177] PCCT header not found.
[ 0.260177] node 0 link 0: io port [8000, ffff]
[ 0.260177] TOM: 00000000c0000000 aka 3072M
[ 0.260177] node 0 link 0: mmio [a0000, bffff]
[ 0.260177] node 0 link 0: mmio [c0000000, efffffff]
[ 0.260177] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.260177] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.260177] TOM2: 0000000240000000 aka 9216M
[ 0.260177] bus: [bus 00-09] on node 0 link 0
[ 0.260177] bus: 00 [io 0x0000-0xffff]
[ 0.260177] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.260177] bus: 00 [mem 0xc0000000-0xf3ffffff]
[ 0.260177] bus: 00 [mem 0xf4000000-0xffffffff]
[ 0.260177] bus: 00 [mem 0x240000000-0xfcffffffff]
[ 0.260177] ACPI: bus type PCI registered
[ 0.260177] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.260177] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.260177] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.260177] PCI: Using configuration type 1 for base access
[ 0.260177] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.260177] mtrr: probably your BIOS does not setup all CPUs.
[ 0.260177] mtrr: corrected configuration.
[ 0.261110] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.261110] ACPI: Added _OSI(Module Device)
[ 0.261110] ACPI: Added _OSI(Processor Device)
[ 0.261110] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.261110] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.268734] ACPI: Interpreter enabled
[ 0.268757] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.268758] ACPI: Using IOAPIC for interrupt routing
[ 0.268786] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.281334] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.281340] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.281344] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.281356] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.281412] acpi PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff window]; [io 0x4700-0x470c window] ignored
[ 0.281742] PCI host bridge to bus 0000:00
[ 0.281744] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.281745] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.281747] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.281748] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.281749] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.281750] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[ 0.281752] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.281759] pci 0000:00:00.0: [10de:02f4] type 00 class 0x050000
[ 0.281895] pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
[ 0.282015] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
[ 0.282139] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
[ 0.282263] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
[ 0.282393] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
[ 0.282517] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
[ 0.282637] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
[ 0.282765] pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
[ 0.282788] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.282881] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.282926] pci 0000:00:08.0: [10de:0369] type 00 class 0x050000
[ 0.283184] pci 0000:00:09.0: [10de:0360] type 00 class 0x060100
[ 0.283326] pci 0000:00:09.1: [10de:0368] type 00 class 0x0c0500
[ 0.283352] pci 0000:00:09.1: reg 0x20: [io 0x1c00-0x1c3f]
[ 0.283357] pci 0000:00:09.1: reg 0x24: [io 0x1c40-0x1c7f]
[ 0.283386] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.283513] pci 0000:00:0a.0: [10de:036c] type 00 class 0x0c0310
[ 0.283520] pci 0000:00:0a.0: reg 0x10: [mem 0xfe02f000-0xfe02ffff]
[ 0.283553] pci 0000:00:0a.0: supports D1 D2
[ 0.283554] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.283644] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 0.283676] pci 0000:00:0a.1: [10de:036d] type 00 class 0x0c0320
[ 0.283683] pci 0000:00:0a.1: reg 0x10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.283715] pci 0000:00:0a.1: supports D1 D2
[ 0.283716] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.283822] pci 0000:00:0a.1: System wakeup disabled by ACPI
[ 0.283859] pci 0000:00:0c.0: [10de:036e] type 00 class 0x01018a
[ 0.283875] pci 0000:00:0c.0: reg 0x20: [io 0xf400-0xf40f]
[ 0.283883] pci 0000:00:0c.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.283884] pci 0000:00:0c.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.283885] pci 0000:00:0c.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.283886] pci 0000:00:0c.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.284018] pci 0000:00:0d.0: [10de:037f] type 00 class 0x010185
[ 0.284025] pci 0000:00:0d.0: reg 0x10: [io 0x09f0-0x09f7]
[ 0.284029] pci 0000:00:0d.0: reg 0x14: [io 0x0bf0-0x0bf3]
[ 0.284033] pci 0000:00:0d.0: reg 0x18: [io 0x0970-0x0977]
[ 0.284036] pci 0000:00:0d.0: reg 0x1c: [io 0x0b70-0x0b73]
[ 0.284040] pci 0000:00:0d.0: reg 0x20: [io 0xe000-0xe00f]
[ 0.284044] pci 0000:00:0d.0: reg 0x24: [mem 0xfe02d000-0xfe02dfff]
[ 0.284175] pci 0000:00:0d.1: [10de:037f] type 00 class 0x010185
[ 0.284182] pci 0000:00:0d.1: reg 0x10: [io 0x09e0-0x09e7]
[ 0.284186] pci 0000:00:0d.1: reg 0x14: [io 0x0be0-0x0be3]
[ 0.284190] pci 0000:00:0d.1: reg 0x18: [io 0x0960-0x0967]
[ 0.284194] pci 0000:00:0d.1: reg 0x1c: [io 0x0b60-0x0b63]
[ 0.284197] pci 0000:00:0d.1: reg 0x20: [io 0xcc00-0xcc0f]
[ 0.284201] pci 0000:00:0d.1: reg 0x24: [mem 0xfe02c000-0xfe02cfff]
[ 0.284330] pci 0000:00:0d.2: [10de:037f] type 00 class 0x010185
[ 0.284337] pci 0000:00:0d.2: reg 0x10: [io 0xc800-0xc807]
[ 0.284341] pci 0000:00:0d.2: reg 0x14: [io 0xc400-0xc403]
[ 0.284344] pci 0000:00:0d.2: reg 0x18: [io 0xc000-0xc007]
[ 0.284348] pci 0000:00:0d.2: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.284352] pci 0000:00:0d.2: reg 0x20: [io 0xb800-0xb80f]
[ 0.284356] pci 0000:00:0d.2: reg 0x24: [mem 0xfe02b000-0xfe02bfff]
[ 0.284487] pci 0000:00:0e.0: [10de:0370] type 01 class 0x060401
[ 0.284593] pci 0000:00:0e.0: System wakeup disabled by ACPI
[ 0.284625] pci 0000:00:0e.1: [10de:0371] type 00 class 0x040300
[ 0.284633] pci 0000:00:0e.1: reg 0x10: [mem 0xfe020000-0xfe023fff]
[ 0.284671] pci 0000:00:0e.1: PME# supported from D3hot D3cold
[ 0.284758] pci 0000:00:0e.1: System wakeup disabled by ACPI
[ 0.284795] pci 0000:00:10.0: [10de:0373] type 00 class 0x068000
[ 0.284804] pci 0000:00:10.0: reg 0x10: [mem 0xfe02a000-0xfe02afff]
[ 0.284808] pci 0000:00:10.0: reg 0x14: [io 0xb400-0xb407]
[ 0.284811] pci 0000:00:10.0: reg 0x18: [mem 0xfe029000-0xfe0290ff]
[ 0.284815] pci 0000:00:10.0: reg 0x1c: [mem 0xfe028000-0xfe02800f]
[ 0.284847] pci 0000:00:10.0: supports D1 D2
[ 0.284848] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.284938] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.284969] pci 0000:00:11.0: [10de:0373] type 00 class 0x068000
[ 0.284978] pci 0000:00:11.0: reg 0x10: [mem 0xfe027000-0xfe027fff]
[ 0.284981] pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb007]
[ 0.284985] pci 0000:00:11.0: reg 0x18: [mem 0xfe026000-0xfe0260ff]
[ 0.284989] pci 0000:00:11.0: reg 0x1c: [mem 0xfe025000-0xfe02500f]
[ 0.285021] pci 0000:00:11.0: supports D1 D2
[ 0.285022] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285110] pci 0000:00:11.0: System wakeup disabled by ACPI
[ 0.285144] pci 0000:00:12.0: [10de:0376] type 01 class 0x060400
[ 0.285174] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285263] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.285295] pci 0000:00:14.0: [10de:0374] type 01 class 0x060400
[ 0.285324] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285412] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.285443] pci 0000:00:15.0: [10de:0378] type 01 class 0x060400
[ 0.285472] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285559] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.285592] pci 0000:00:16.0: [10de:0375] type 01 class 0x060400
[ 0.285623] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285710] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.285744] pci 0000:00:17.0: [10de:0377] type 01 class 0x060400
[ 0.285774] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285862] pci 0000:00:17.0: System wakeup disabled by ACPI
[ 0.285892] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.286003] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.286116] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.286226] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.286368] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.286407] pci 0000:02:0b.0: [104c:8023] type 00 class 0x0c0010
[ 0.286417] pci 0000:02:0b.0: reg 0x10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.286423] pci 0000:02:0b.0: reg 0x14: [mem 0xfdff8000-0xfdffbfff]
[ 0.286469] pci 0000:02:0b.0: supports D1 D2
[ 0.286470] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.286517] pci 0000:00:0e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.286520] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.286522] pci 0000:00:0e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.286523] pci 0000:00:0e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.286524] pci 0000:00:0e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.286526] pci 0000:00:0e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.286527] pci 0000:00:0e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.286528] pci 0000:00:0e.0: bridge window [mem 0xbff00000-0xfebfffff window] (subtractive decode)
[ 0.286562] pci 0000:03:00.0: [1033:0125] type 01 class 0x060400
[ 0.286622] pci 0000:03:00.0: supports D1
[ 0.286623] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.286675] pci 0000:03:00.1: [1033:0125] type 01 class 0x060400
[ 0.286694] pci 0000:03:00.1: reg 0x10: [mem 0xfdeff000-0xfdeff07f 64bit]
[ 0.286759] pci 0000:03:00.1: supports D1
[ 0.286760] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.286813] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.286821] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.286824] pci 0000:00:12.0: bridge window [io 0xa000-0xafff]
[ 0.286825] pci 0000:00:12.0: bridge window [mem 0xfdc00000-0xfdefffff]
[ 0.286828] pci 0000:00:12.0: bridge window [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.286868] pci 0000:04:01.0: [13c1:1003] type 00 class 0x010400
[ 0.286884] pci 0000:04:01.0: reg 0x10: [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.286895] pci 0000:04:01.0: reg 0x18: [mem 0xfddff000-0xfddfffff 64bit]
[ 0.286903] pci 0000:04:01.0: reg 0x20: [io 0xac00-0xac3f]
[ 0.286916] pci 0000:04:01.0: reg 0x30: [mem 0xfdcc0000-0xfdcdffff pref]
[ 0.286950] pci 0000:04:01.0: supports D1 D2
[ 0.286987] pci 0000:04:02.0: [8086:1079] type 00 class 0x020000
[ 0.287005] pci 0000:04:02.0: reg 0x10: [mem 0xfddc0000-0xfdddffff 64bit]
[ 0.287016] pci 0000:04:02.0: reg 0x18: [mem 0xfdd40000-0xfdd7ffff 64bit]
[ 0.287023] pci 0000:04:02.0: reg 0x20: [io 0xa800-0xa83f]
[ 0.287037] pci 0000:04:02.0: reg 0x30: [mem 0xfdcc0000-0xfdcfffff pref]
[ 0.287072] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
[ 0.287115] pci 0000:04:02.1: [8086:1079] type 00 class 0x020000
[ 0.287133] pci 0000:04:02.1: reg 0x10: [mem 0xfdda0000-0xfddbffff 64bit]
[ 0.287144] pci 0000:04:02.1: reg 0x18: [mem 0xfdd00000-0xfdd3ffff 64bit]
[ 0.287151] pci 0000:04:02.1: reg 0x20: [io 0xa400-0xa43f]
[ 0.287164] pci 0000:04:02.1: reg 0x30: [mem 0xfdcc0000-0xfdcfffff pref]
[ 0.287199] pci 0000:04:02.1: PME# supported from D0 D3hot D3cold
[ 0.287267] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.287271] pci 0000:03:00.0: bridge window [io 0xa000-0xafff]
[ 0.287274] pci 0000:03:00.0: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.287279] pci 0000:03:00.0: bridge window [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.287356] pci 0000:03:00.1: PCI bridge to [bus 05]
[ 0.287403] pci 0000:00:14.0: PCI bridge to [bus 06]
[ 0.287434] pci 0000:00:15.0: PCI bridge to [bus 07]
[ 0.287473] pci 0000:08:00.0: [11ab:6141] type 00 class 0x010681
[ 0.287486] pci 0000:08:00.0: reg 0x10: [io 0x9c00-0x9c07]
[ 0.287493] pci 0000:08:00.0: reg 0x14: [io 0x9800-0x9803]
[ 0.287500] pci 0000:08:00.0: reg 0x18: [io 0x9400-0x943f]
[ 0.287514] pci 0000:08:00.0: reg 0x20: [io 0x9000-0x901f]
[ 0.287521] pci 0000:08:00.0: reg 0x24: [mem 0xfdbff000-0xfdbff3ff]
[ 0.287529] pci 0000:08:00.0: reg 0x30: [mem 0xfdb80000-0xfdbbffff pref]
[ 0.287569] pci 0000:08:00.0: supports D1
[ 0.287570] pci 0000:08:00.0: PME# supported from D0 D1 D3hot
[ 0.287615] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.287620] pci 0000:00:16.0: PCI bridge to [bus 08]
[ 0.287623] pci 0000:00:16.0: bridge window [io 0x9000-0x9fff]
[ 0.287625] pci 0000:00:16.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.287657] pci 0000:09:00.0: [10de:0393] type 00 class 0x030000
[ 0.287666] pci 0000:09:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.287673] pci 0000:09:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.287680] pci 0000:09:00.0: reg 0x1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.287686] pci 0000:09:00.0: reg 0x24: [io 0x8c00-0x8c7f]
[ 0.287691] pci 0000:09:00.0: reg 0x30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.287753] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.287757] pci 0000:00:17.0: PCI bridge to [bus 09]
[ 0.287760] pci 0000:00:17.0: bridge window [io 0x8000-0x8fff]
[ 0.287761] pci 0000:00:17.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.287764] pci 0000:00:17.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.288711] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.288783] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.288854] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.288927] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
[ 0.288999] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[ 0.289071] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.289142] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15)
[ 0.289215] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
[ 0.289286] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289359] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289431] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[ 0.289503] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
[ 0.289575] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.289646] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289717] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289788] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289860] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.289932] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.290004] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.290076] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.290198] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.290316] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.290433] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.290550] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.290667] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.290784] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.290901] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.291018] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.291135] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.291252] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 0.291370] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
[ 0.291488] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.291606] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.291724] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.291841] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.291959] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.292082] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.292200] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 0.292318] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.292436] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
[ 0.292515] ACPI: Enabled 1 GPEs in block 20 to 5F
[ 0.292613] pci 0000:09:00.0: vgaarb: setting as boot VGA device
[ 0.292613] pci 0000:09:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.292613] pci 0000:09:00.0: vgaarb: bridge control possible
[ 0.292613] vgaarb: loaded
[ 0.292613] SCSI subsystem initialized
[ 0.292613] libata version 3.00 loaded.
[ 0.292613] PCI: Using ACPI for IRQ routing
[ 0.293162] PCI: pci_cache_line_size set to 64 bytes
[ 0.293223] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.293224] e820: reserve RAM buffer [mem 0xbfeb0000-0xbfffffff]
[ 0.293316] NetLabel: Initializing
[ 0.293316] NetLabel: domain hash size = 128
[ 0.293317] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.293331] NetLabel: unlabeled traffic allowed by default
[ 0.293353] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.293353] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.293353] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.296042] clocksource: Switched to clocksource hpet
[ 0.310650] VFS: Disk quotas dquot_6.6.0
[ 0.310679] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.310771] AppArmor: AppArmor Filesystem Enabled
[ 0.310813] pnp: PnP ACPI init
[ 0.311000] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.311001] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.311003] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.311004] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.311006] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.311007] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.311011] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311123] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.311124] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.311126] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.311128] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311210] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.311633] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.312230] pnp 00:04: [dma 3]
[ 0.312267] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.312337] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.312384] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.313248] system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.313251] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313459] system 00:08: [mem 0x000d2000-0x000d3fff] has been reserved
[ 0.313461] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.313462] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.313463] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.313465] system 00:08: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.313466] system 00:08: [mem 0xbfeb0000-0xbfefffff] could not be reserved
[ 0.313468] system 00:08: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.313469] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.313470] system 00:08: [mem 0x00100000-0xbfeaffff] could not be reserved
[ 0.313472] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.313473] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.313475] system 00:08: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.313476] system 00:08: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.313477] system 00:08: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.313479] system 00:08: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.313481] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.313491] pnp: PnP ACPI: found 9 devices
[ 0.320184] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.320190] pci 0000:04:02.0: can't claim BAR 6 [mem 0xfdcc0000-0xfdcfffff pref]: address conflict with 0000:04:01.0 [mem 0xfdcc0000-0xfdcdffff pref]
[ 0.320192] pci 0000:04:02.1: can't claim BAR 6 [mem 0xfdcc0000-0xfdcfffff pref]: address conflict with 0000:04:01.0 [mem 0xfdcc0000-0xfdcdffff pref]
[ 0.320229] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.320234] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.320237] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.320244] pci 0000:04:02.0: BAR 6: assigned [mem 0xfdc00000-0xfdc3ffff pref]
[ 0.320245] pci 0000:04:02.1: BAR 6: assigned [mem 0xfdc40000-0xfdc7ffff pref]
[ 0.320247] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.320249] pci 0000:03:00.0: bridge window [io 0xa000-0xafff]
[ 0.320252] pci 0000:03:00.0: bridge window [mem 0xfdc00000-0xfddfffff]
[ 0.320255] pci 0000:03:00.0: bridge window [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.320260] pci 0000:03:00.1: PCI bridge to [bus 05]
[ 0.320272] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.320273] pci 0000:00:12.0: bridge window [io 0xa000-0xafff]
[ 0.320275] pci 0000:00:12.0: bridge window [mem 0xfdc00000-0xfdefffff]
[ 0.320277] pci 0000:00:12.0: bridge window [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.320280] pci 0000:00:14.0: PCI bridge to [bus 06]
[ 0.320284] pci 0000:00:15.0: PCI bridge to [bus 07]
[ 0.320288] pci 0000:00:16.0: PCI bridge to [bus 08]
[ 0.320290] pci 0000:00:16.0: bridge window [io 0x9000-0x9fff]
[ 0.320292] pci 0000:00:16.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.320295] pci 0000:00:17.0: PCI bridge to [bus 09]
[ 0.320296] pci 0000:00:17.0: bridge window [io 0x8000-0x8fff]
[ 0.320298] pci 0000:00:17.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.320300] pci 0000:00:17.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.320304] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.320305] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.320306] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.320307] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.320309] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.320310] pci_bus 0000:00: resource 9 [mem 0xbff00000-0xfebfffff window]
[ 0.320311] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.320312] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.320314] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.320315] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.320316] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.320317] pci_bus 0000:02: resource 8 [mem 0xfed40000-0xfed44fff window]
[ 0.320318] pci_bus 0000:02: resource 9 [mem 0xbff00000-0xfebfffff window]
[ 0.320319] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.320321] pci_bus 0000:03: resource 1 [mem 0xfdc00000-0xfdefffff]
[ 0.320322] pci_bus 0000:03: resource 2 [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.320323] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.320324] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfddfffff]
[ 0.320325] pci_bus 0000:04: resource 2 [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.320327] pci_bus 0000:08: resource 0 [io 0x9000-0x9fff]
[ 0.320328] pci_bus 0000:08: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.320329] pci_bus 0000:09: resource 0 [io 0x8000-0x8fff]
[ 0.320330] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.320331] pci_bus 0000:09: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.320471] NET: Registered protocol family 2
[ 0.320651] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.320882] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.321275] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.321362] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.321422] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.321544] NET: Registered protocol family 1
[ 0.321588] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.322001] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.400537] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.400731] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.400767] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.400803] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.400838] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.400877] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.400920] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.400968] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.401016] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.401068] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.401123] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.401181] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.401242] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.401277] pci 0000:09:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.401278] PCI: CLS 32 bytes, default 64
[ 0.401335] Unpacking initramfs...
[ 1.269271] Freeing initrd memory: 10428K
[ 1.269580] PCI-DMA: Disabling AGP.
[ 1.269644] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.269644] PCI-DMA: using GART IOMMU.
[ 1.269647] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.273093] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e55f9e92a5, max_idle_ns: 440795306426 ns
[ 1.273134] Scanning for low memory corruption every 60 seconds
[ 1.273430] audit: initializing netlink subsys (disabled)
[ 1.273499] audit: type=2000 audit(1501604146.272:1): state=initialized audit_enabled=0 res=1
[ 1.273794] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 1.273828] zbud: loaded
[ 1.275678] Key type asymmetric registered
[ 1.275679] Asymmetric key parser 'x509' registered
[ 1.275690] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.275721] io scheduler noop registered
[ 1.275722] io scheduler deadline registered
[ 1.275734] io scheduler cfq registered (default)
[ 1.275735] io scheduler mq-deadline registered
[ 1.276182] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 1.276183] vesafb: scrolling: redraw
[ 1.276184] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.276196] vesafb: framebuffer at 0xe0000000, mapped to 0xffffb03ac1200000, using 1216k, total 1216k
[ 1.283257] Console: switching to colour frame buffer device 80x30
[ 1.290237] fb0: VESA VGA frame buffer device
[ 1.290342] GHES: HEST is not enabled!
[ 1.290426] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.310852] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.312348] Non-volatile memory driver v1.3
[ 1.312374] Linux agpgart interface v0.103
[ 1.312660] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.313058] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.313088] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.313172] mousedev: PS/2 mouse device common for all mice
[ 1.313249] rtc_cmos 00:02: RTC can wake from S4
[ 1.313383] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.313418] rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.313440] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.313451] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.313601] NET: Registered protocol family 10
[ 1.317721] Segment Routing with IPv6
[ 1.317924] microcode: AMD CPU family 0xf not supported
[ 1.318052] registered taskstats version 1
[ 1.318071] zswap: loaded using pool lzo/zbud
[ 1.333475] Key type big_key registered
[ 1.335181] Key type encrypted registered
[ 1.335184] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.335526] Magic number: 13:502:286
[ 1.335645] rtc_cmos 00:02: setting system clock to 2017-08-01 16:15:46 UTC (1501604146)
[ 1.335683] PM: Checking hibernation image partition /dev/disk/by-id/scsi-1AMCC_J0827296748EC30067A8-part2
[ 1.346803] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.564039] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[ 2.566954] PM: Hibernation image not present or could not be loaded.
[ 2.569106] Freeing unused kernel memory: 1828K
[ 2.569109] Write protecting the kernel read-only data: 14336k
[ 2.569506] Freeing unused kernel memory: 728K
[ 2.571483] Freeing unused kernel memory: 888K
[ 2.574566] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.574762] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.574773] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.576091] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 2.576193] systemd[1]: Detected architecture x86-64.
[ 2.576195] systemd[1]: Running in initial RAM disk.
[ 2.576208] systemd[1]: Set hostname to <mainframe>.
[ 2.608980] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.609001] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.609032] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.609090] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.609634] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.609858] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.610257] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.614546] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.614595] systemd[1]: Reached target Swap.
[ 2.614636] systemd[1]: Listening on udev Kernel Socket.
[ 2.614651] systemd[1]: Reached target Timers.
[ 2.614713] systemd[1]: Listening on Journal Audit Socket.
[ 2.614747] systemd[1]: Listening on udev Control Socket.
[ 2.636135] alua: device handler registered
[ 2.636418] emc: device handler registered
[ 2.636610] rdac: device handler registered
[ 2.645180] device-mapper: uevent: version 1.0.3
[ 2.645257] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.839225] ACPI: bus type USB registered
[ 2.839251] usbcore: registered new interface driver usbfs
[ 2.839260] usbcore: registered new interface driver hub
[ 2.839295] usbcore: registered new device driver usb
[ 2.839790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.841191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.841420] ehci-pci: EHCI PCI platform driver
[ 2.841666] ehci-pci 0000:00:0a.1: EHCI Host Controller
[ 2.841674] ehci-pci 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.841683] ehci-pci 0000:00:0a.1: debug port 1
[ 2.841715] ehci-pci 0000:00:0a.1: cache line size of 32 is not supported
[ 2.841734] ehci-pci 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.842118] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.842159] ACPI: Power Button [PWRB]
[ 2.842236] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.842261] ACPI: Power Button [PWRF]
[ 2.856030] ehci-pci 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.856093] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.856094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.856096] usb usb1: Product: EHCI Host Controller
[ 2.856097] usb usb1: Manufacturer: Linux 4.11.8-2-default ehci_hcd
[ 2.856097] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.856221] hub 1-0:1.0: USB hub found
[ 2.856228] hub 1-0:1.0: 10 ports detected
[ 2.856449] sata_nv 0000:00:0d.0: version 3.5
[ 2.856809] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 2.856828] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.857786] ohci-pci: OHCI PCI platform driver
[ 2.868685] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 2.869086] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 2.872160] scsi host0: sata_nv
[ 2.882172] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 2.895121] scsi host2: sata_nv
[ 2.895191] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
[ 2.895193] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[ 2.895572] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 2.895592] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.914529] scsi host3: sata_nv
[ 2.925310] scsi host4: sata_nv
[ 2.925380] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
[ 2.925381] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
[ 2.925415] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.932977] wmi: Mapper loaded
[ 2.940085] firewire_ohci 0000:02:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.955565] scsi host5: pata_amd
[ 2.968124] scsi host6: pata_amd
[ 2.968179] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.968180] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.968442] ohci-pci 0000:00:0a.0: OHCI PCI host controller
[ 2.968448] ohci-pci 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 2.968490] ohci-pci 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.973519] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 2.973663] checking generic (e0000000 130000) vs hw (e0000000 10000000)
[ 2.973664] fb: switching to nouveaufb from VESA VGA
[ 2.973684] Console: switching to colour dummy device 80x25
[ 2.977186] nouveau 0000:09:00.0: NVIDIA G73 (04b300a2)
[ 3.030082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.030085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.030086] usb usb2: Product: OHCI PCI host controller
[ 3.030087] usb usb2: Manufacturer: Linux 4.11.8-2-default ohci_hcd
[ 3.030088] usb usb2: SerialNumber: 0000:00:0a.0
[ 3.030219] hub 2-0:1.0: USB hub found
[ 3.030227] hub 2-0:1.0: 10 ports detected
[ 3.030792] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[ 3.030799] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 3.048055] scsi host7: sata_nv
[ 3.068036] scsi host8: sata_nv
[ 3.068077] ata7: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 23
[ 3.068079] ata8: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 23
[ 3.142775] ata5.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 3.142780] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 3.147626] ata5.00: configured for UDMA/33
[ 3.196027] 3w-9xxx: scsi1: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:.
[ 3.211984] nouveau 0000:09:00.0: bios: version 05.73.22.33.00
[ 3.213249] nouveau 0000:09:00.0: fb: 256 MiB DDR2
[ 3.214297] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.254301] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.269042] [TTM] Zone kernel: Available graphics memory: 4086988 kiB
[ 3.269043] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.269044] [TTM] Initializing pool allocator
[ 3.269047] [TTM] Initializing DMA pool allocator
[ 3.269064] nouveau 0000:09:00.0: DRM: VRAM: 252 MiB
[ 3.269065] nouveau 0000:09:00.0: DRM: GART: 512 MiB
[ 3.269067] nouveau 0000:09:00.0: DRM: TMDS table version 1.1
[ 3.269069] nouveau 0000:09:00.0: DRM: TMDS table script pointers not stubbed
[ 3.269070] nouveau 0000:09:00.0: DRM: DCB version 3.0
[ 3.269072] nouveau 0000:09:00.0: DRM: DCB outp 00: 01000300 00000028
[ 3.269073] nouveau 0000:09:00.0: DRM: DCB outp 01: 03000302 00000000
[ 3.269075] nouveau 0000:09:00.0: DRM: DCB outp 02: 04011310 00000028
[ 3.269076] nouveau 0000:09:00.0: DRM: DCB outp 03: 020223f1 00c0c083
[ 3.269077] nouveau 0000:09:00.0: DRM: DCB conn 00: 0030
[ 3.269078] nouveau 0000:09:00.0: DRM: DCB conn 01: 0100
[ 3.269080] nouveau 0000:09:00.0: DRM: DCB conn 02: 0210
[ 3.269081] nouveau 0000:09:00.0: DRM: DCB conn 03: 0211
[ 3.269082] nouveau 0000:09:00.0: DRM: DCB conn 04: 0213
[ 3.274723] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.274725] [drm] Driver supports precise vblank timestamp query.
[ 3.278388] nouveau 0000:09:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 3.279557] nouveau 0000:09:00.0: DRM: MM: using M2MF for buffer copies
[ 3.279568] nouveau 0000:09:00.0: DRM: Setting dpms mode 3 on TV encoder (output 3)
[ 3.316020] scsi host1: 3ware 9000 Storage Controller
[ 3.316072] 3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xfddff000, IRQ: 16.
[ 3.382301] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.388181] nouveau 0000:09:00.0: DRM: allocated 1280x1024 fb: 0x9000, bo ffff880a3095d000
[ 3.388577] fbcon: nouveaufb (fb0) is primary device
[ 3.424018] usb 2-1: new low-speed USB device number 2 using ohci-pci
[ 3.456097] firewire_core 0000:02:0b.0: created device fw0: GUID 0011d80000d9ef56, S400
[ 3.518541] Console: switching to colour frame buffer device 160x64
[ 3.526221] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.624848] nouveau 0000:09:00.0: fb0: nouveaufb frame buffer device
[ 3.640048] [drm] Initialized nouveau 1.3.1 20120801 for 0000:09:00.0 on minor 0
[ 3.676018] 3w-9xxx: scsi1: Firmware FE9X 3.08.00.029, BIOS BE9X 3.10.00.003, Ports: 8.
[ 3.680545] scsi 1:0:0:0: Direct-Access AMCC 9550SX-8LP DISK 3.08 PQ: 0 ANSI: 5
[ 3.692017] usb 2-1: New USB device found, idVendor=06da, idProduct=0003
[ 3.692019] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.692020] usb 2-1: Product: USB UPS
[ 3.692021] usb 2-1: Manufacturer: CTN
[ 3.709177] usbcore: registered new interface driver usbhid
[ 3.709179] usbhid: USB HID core driver
[ 3.712622] hid-generic 0003:06DA:0003.0001: hiddev0,hidraw0: USB HID v1.11 Device [CTN USB UPS] on usb-0000:00:0a.0-1/input0
[ 3.712704] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.713315] sd 1:0:0:0: [sda] 41943039 512-byte logical blocks: (21.5 GB/20.0 GiB)
[ 3.713559] sd 1:0:0:0: [sda] Write Protect is off
[ 3.713560] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 3.713995] sd 1:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 3.728967] scsi 1:0:0:1: Direct-Access AMCC 9550SX-8LP DISK 3.08 PQ: 0 ANSI: 5
[ 3.761837] sda: sda1 sda2 sda3
[ 3.763471] sd 1:0:0:0: [sda] Attached SCSI disk
[ 3.764289] sd 1:0:0:1: Attached scsi generic sg1 type 0
[ 3.765050] sd 1:0:0:1: [sdb] 9723576321 512-byte logical blocks: (4.98 TB/4.53 TiB)
[ 3.765279] sd 1:0:0:1: [sdb] Write Protect is off
[ 3.765281] sd 1:0:0:1: [sdb] Mode Sense: 23 00 00 00
[ 3.765895] sd 1:0:0:1: [sdb] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
[ 3.788174] random: fast init done
[ 3.813915] sdb: sdb1
[ 3.815337] sd 1:0:0:1: [sdb] Attached SCSI disk
[ 3.838285] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.845592] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 3.857576] scsi 5:0:0:0: Attached scsi generic sg2 type 5
[ 3.857683] ata6: port disabled--ignoring
[ 3.940017] usb 1-5: new high-speed USB device number 3 using ehci-pci
[ 4.090752] usb 1-5: New USB device found, idVendor=0bc2, idProduct=ab44
[ 4.090754] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.090755] usb 1-5: Product: Backup+ Hub
[ 4.090756] usb 1-5: Manufacturer: Seagate
[ 4.090757] usb 1-5: SerialNumber: 01CB6485B1Z1
[ 4.091062] hub 1-5:1.0: USB hub found
[ 4.091377] hub 1-5:1.0: 3 ports detected
[ 4.170283] ata8: SATA link down (SStatus 0 SControl 300)
[ 4.187150] sr 5:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 4.187154] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.187381] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.269607] random: crng init done
[ 4.380032] usb 1-5.1: new high-speed USB device number 4 using ehci-pci
[ 4.533756] usb 1-5.1: New USB device found, idVendor=0bc2, idProduct=ab38
[ 4.533758] usb 1-5.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 4.533760] usb 1-5.1: Product: Backup+ Hub BK
[ 4.533761] usb 1-5.1: Manufacturer: Seagate
[ 4.533762] usb 1-5.1: SerialNumber: NA8THNZH
[ 4.535534] usbcore: registered new interface driver usb-storage
[ 4.536730] scsi host9: uas
[ 4.539381] scsi 9:0:0:0: Direct-Access Seagate Backup+ Hub BK D781 PQ: 0 ANSI: 6
[ 4.576185] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 4.577895] usbcore: registered new interface driver uas
[ 4.579013] sd 9:0:0:0: [sdc] 11721045167 512-byte logical blocks: (6.00 TB/5.46 TiB)
[ 4.579015] sd 9:0:0:0: [sdc] 4096-byte physical blocks
[ 4.579380] sd 9:0:0:0: [sdc] Write Protect is off
[ 4.579382] sd 9:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[ 4.580016] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.596029] sdc: sdc1
[ 4.598893] sd 9:0:0:0: [sdc] Attached SCSI disk
[ 4.673234] PM: Starting manual resume from disk
[ 4.673237] PM: Hibernation image partition 8:2 present
[ 4.673238] PM: Looking for hibernation image.
[ 4.673472] PM: Image not found (code -22)
[ 4.673473] PM: Hibernation image not present or could not be loaded.
[ 4.836630] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.042965] systemd-journald[133]: Received SIGTERM from PID 1 (systemd).
[ 5.181489] systemd: 15 output lines suppressed due to ratelimiting
[ 6.175300] systemd-sysv-generator[476]: Overwriting existing symlink /run/systemd/generator.late/3dm2.service with real service.
[ 7.028911] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr
[ 7.160680] RPC: Registered named UNIX socket transport module.
[ 7.160682] RPC: Registered udp transport module.
[ 7.160682] RPC: Registered tcp transport module.
[ 7.160683] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.288644] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.667196] systemd-journald[486]: Received request to flush runtime journal from PID 1
[ 9.428132] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 9.508748] ACPI: Invalid passive threshold
[ 9.508922] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.509034] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.509036] ACPI: Thermal Zone [THRM] (40 C)
[ 9.555016] ATK0110 ATK0110:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.572511] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.572519] k8temp 0000:00:18.3: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.590487] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C05 (\_SB.PCI0.SM00) (20170119/utaddress-247)
[ 9.590493] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.590529] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 9.609375] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 9.609455] nv_tco: Watchdog reboot not detected
[ 9.609505] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 9.618757] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.623616] IT8716 SuperIO detected.
[ 9.623813] parport_pc 00:04: reported by Plug and Play ACPI
[ 9.623872] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 9.638511] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 9.638513] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 9.638898] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 9.720627] ppdev: user-space parallel port driver
[ 9.912437] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 9.912838] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 9.991398] e1000 0000:04:02.0 eth0: (PCI-X:133MHz:64-bit) 00:04:23:bd:33:50
[ 9.991403] e1000 0000:04:02.0 eth0: Intel(R) PRO/1000 Network Connection
[ 10.220893] kvm: Nested Virtualization enabled
[ 10.241225] EDAC MC: Ver: 3.0.0
[ 10.255155] MCE: In-kernel MCE decoding enabled.
[ 10.262121] EDAC amd64: Node 0: DRAM ECC disabled.
[ 10.262123] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 10.323474] e1000 0000:04:02.1 eth1: (PCI-X:133MHz:64-bit) 00:04:23:bd:33:51
[ 10.323478] e1000 0000:04:02.1 eth1: Intel(R) PRO/1000 Network Connection
[ 10.345306] powernow_k8: fid 0x18 (3200 MHz), vid 0x8
[ 10.345308] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
[ 10.345309] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
[ 10.345309] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
[ 10.345310] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
[ 10.345310] powernow_k8: fid 0xe (2200 MHz), vid 0x10
[ 10.345311] powernow_k8: fid 0xc (2000 MHz), vid 0x10
[ 10.345312] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[ 10.345312] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 10.345365] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ (2 cpu cores) (version 2.20.00)
[ 10.425783] e1000 0000:04:02.1 enp4s2f1: renamed from eth1
[ 10.429892] audit: type=1400 audit(1501604155.592:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=621 comm="apparmor_parser"
[ 10.440543] e1000 0000:04:02.0 enp4s2f0: renamed from eth0
[ 10.456486] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:5a:2a:99
[ 10.456490] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 10.456921] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[ 10.722962] audit: type=1400 audit(1501604155.884:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=800 comm="apparmor_parser"
[ 10.996626] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:5a:2e:7b
[ 10.996631] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 10.997322] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 10.997336] snd_hda_intel 0000:00:0e.1: msi for device 1043:81f6 set to 0
[ 10.999462] forcedeth 0000:00:11.0 enp0s17: renamed from eth1
[ 11.013053] forcedeth 0000:00:10.0 enp0s16: renamed from eth0
[ 11.299291] audit: type=1400 audit(1501604156.460:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=814 comm="apparmor_parser"
[ 11.351006] Adding 2096124k swap on /dev/sda2. Priority:-1 extents:1 across:2096124k FS
[ 11.472172] raid6: sse2x1 gen() 3709 MB/s
[ 11.503944] audit: type=1400 audit(1501604156.664:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=827 comm="apparmor_parser"
[ 11.540025] raid6: sse2x1 xor() 3450 MB/s
[ 11.584405] audit: type=1400 audit(1501604156.748:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=833 comm="apparmor_parser"
[ 11.608036] raid6: sse2x2 gen() 5403 MB/s
[ 11.676024] raid6: sse2x2 xor() 4157 MB/s
[ 11.744422] raid6: sse2x4 gen() 5286 MB/s
[ 11.813146] raid6: sse2x4 xor() 2404 MB/s
[ 11.813148] raid6: using algorithm sse2x2 gen() 5403 MB/s
[ 11.813148] raid6: .... xor() 4157 MB/s, rmw enabled
[ 11.813149] raid6: using intx1 recovery algorithm
[ 11.837445] xor: measuring software checksum speed
[ 11.876209] prefetch64-sse: 9342.000 MB/sec
[ 11.916079] generic_sse: 9322.000 MB/sec
[ 11.916080] xor: using function: prefetch64-sse (9342.000 MB/sec)
[ 11.960122] Btrfs loaded, crc32c=crc32c-generic, assert=on
[ 11.960693] BTRFS: device fsid 22aaaa76-0885-4683-ac04-477c27cfab80 devid 1 transid 1486834 /dev/sdb1
[ 12.217464] audit: type=1400 audit(1501604157.380:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=837 comm="apparmor_parser"
[ 12.217660] audit: type=1400 audit(1501604157.380:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=837 comm="apparmor_parser"
[ 12.217832] audit: type=1400 audit(1501604157.380:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=837 comm="apparmor_parser"
[ 12.218343] audit: type=1400 audit(1501604157.380:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=837 comm="apparmor_parser"
[ 12.276155] audit: type=1400 audit(1501604157.440:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=842 comm="apparmor_parser"
[ 12.564021] snd_hda_codec_analog hdaudioC0D0: autoconfig for AD1988B: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[ 12.564024] snd_hda_codec_analog hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.564025] snd_hda_codec_analog hdaudioC0D0: hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 12.564026] snd_hda_codec_analog hdaudioC0D0: mono: mono_out=0x0
[ 12.564027] snd_hda_codec_analog hdaudioC0D0: dig-out=0x1b/0x0
[ 12.564028] snd_hda_codec_analog hdaudioC0D0: inputs:
[ 12.564030] snd_hda_codec_analog hdaudioC0D0: Front Mic=0x14
[ 12.564031] snd_hda_codec_analog hdaudioC0D0: Rear Mic=0x17
[ 12.564032] snd_hda_codec_analog hdaudioC0D0: Line=0x15
[ 12.564033] snd_hda_codec_analog hdaudioC0D0: CD=0x18
[ 12.769348] floppy0: no floppy controllers found
[ 12.769364] work still pending
[ 15.163186] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/sound/card0/input6
[ 15.163541] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:0e.1/sound/card0/input7
[ 15.163596] input: HDA NVidia Line as /devices/pci0000:00/0000:00:0e.1/sound/card0/input8
[ 15.163650] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:0e.1/sound/card0/input9
[ 15.163703] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:0e.1/sound/card0/input10
[ 15.163758] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:0e.1/sound/card0/input11
[ 15.163811] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:0e.1/sound/card0/input12
[ 15.566113] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 15.588871] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[ 15.589082] EXT4-fs (sda1): mounted filesystem without journal. Opts: acl,user_xattr
[ 15.675492] kauditd_printk_skb: 23 callbacks suppressed
[ 15.675495] audit: type=1400 audit(1501604160.836:35): apparmor="STATUS" operation="profile_load" name="/usr/sbin/dovecot" pid=947 comm="apparmor_parser"
[ 16.233868] audit: type=1400 audit(1501604161.396:36): apparmor="STATUS" operation="profile_load" name="/usr/sbin/identd" pid=980 comm="apparmor_parser"
[ 16.344025] audit: type=1400 audit(1501604161.504:37): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=997 comm="apparmor_parser"
[ 16.344329] audit: type=1400 audit(1501604161.508:38): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd//qemu_bridge_helper" pid=997 comm="apparmor_parser"
[ 16.465871] audit: type=1400 audit(1501604161.628:39): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mdnsd" pid=1003 comm="apparmor_parser"
[ 16.610288] audit: type=1400 audit(1501604161.772:40): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nmbd" pid=1007 comm="apparmor_parser"
[ 16.765434] audit: type=1400 audit(1501604161.928:41): apparmor="STATUS" operation="profile_load" name="/usr/sbin/nscd" pid=1011 comm="apparmor_parser"
[ 16.950398] audit: type=1400 audit(1501604162.112:42): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=1015 comm="apparmor_parser"
[ 17.168619] audit: type=1400 audit(1501604162.332:43): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbd" pid=1019 comm="apparmor_parser"
[ 17.447675] audit: type=1400 audit(1501604162.608:44): apparmor="STATUS" operation="profile_load" name="/usr/sbin/smbldap-useradd" pid=1023 comm="apparmor_parser"
[ 20.223125] No iBFT detected.
[ 20.358780] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 20.413147] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 20.413988] bond0 (uninitialized): Setting MII monitoring interval to 100
[ 20.413996] bond0 (uninitialized): Setting LACP rate to fast (1)
[ 20.551469] br1: port 1(enp4s2f0) entered blocking state
[ 20.551473] br1: port 1(enp4s2f0) entered disabled state
[ 20.551580] device enp4s2f0 entered promiscuous mode
[ 20.554992] forcedeth 0000:00:10.0 enp0s16: MSI enabled
[ 20.557090] bond0: Enslaving enp0s16 as a backup interface with an up link
[ 20.560473] e1000: enp4s2f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 20.565168] forcedeth 0000:00:11.0 enp0s17: MSI enabled
[ 20.566725] bond0: Enslaving enp0s17 as a backup interface with an up link
[ 20.569591] br1: port 1(enp4s2f0) entered blocking state
[ 20.569594] br1: port 1(enp4s2f0) entered forwarding state
[ 20.576365] br0: port 1(bond0) entered blocking state
[ 20.576379] br0: port 1(bond0) entered disabled state
[ 20.577438] device bond0 entered promiscuous mode
[ 20.577439] device enp0s16 entered promiscuous mode
[ 20.577656] device enp0s17 entered promiscuous mode
[ 20.586855] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 21.440392] br0: port 1(bond0) entered blocking state
[ 21.440395] br0: port 1(bond0) entered forwarding state
[ 21.440479] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 24.568063] kauditd_printk_skb: 3 callbacks suppressed
[ 24.568066] audit: type=1400 audit(1501604169.728:48): apparmor="DENIED" operation="capable" profile="/usr/sbin/ntpd" pid=1705 comm="ntpd" capability=12 capname="net_admin"
[ 24.891807] audit: type=1400 audit(1501604170.051:49): apparmor="DENIED" operation="capable" profile="/usr/sbin/nmbd" pid=1671 comm="nmbd" capability=12 capname="net_admin"
[ 24.893523] audit: type=1400 audit(1501604170.055:50): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/nmbd" name="/var/log/samba/log.nmbd" pid=1713 comm="nmbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 25.100548] NFSD: starting 90-second grace period (net ffffffffa1ef6580)
[ 26.296058] audit: type=1400 audit(1501604171.459:51): apparmor="DENIED" operation="capable" profile="/usr/sbin/smbd" pid=1744 comm="smbd" capability=12 capname="net_admin"
[ 26.608079] audit: type=1400 audit(1501604171.771:52): apparmor="DENIED" operation="capable" profile="/usr/sbin/smbd" pid=1776 comm="smbd" capability=12 capname="net_admin"
[ 26.608509] audit: type=1400 audit(1501604171.771:53): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/smbd" name="/var/log/samba/log.smbd" pid=1776 comm="smbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 28.300046] NET: Registered protocol family 17
[ 28.536188] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.574776] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.012900] Ebtables v2.0 registered
[ 57.756492] SGI XFS with ACLs, security attributes, no debug enabled
[ 57.765682] XFS (sdc1): Mounting V5 Filesystem
[ 57.843017] XFS (sdc1): Ending clean mount
[ 159.365720] audit: type=1400 audit(1501604304.850:54): apparmor="DENIED" operation="capable" profile="/usr/sbin/nmbd" pid=1713 comm="nmbd" capability=12 capname="net_admin"
[ 758.108408] audit: type=1400 audit(1501604903.597:55): apparmor="DENIED" operation="capable" profile="/usr/sbin/nmbd" pid=1713 comm="nmbd" capability=12 capname="net_admin"
[ 9104.841365] audit: type=1400 audit(1501613250.329:56): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/nmbd" name="/var/log/samba/log.nmbd" pid=1713 comm="nmbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[18131.259411] BTRFS warning (device sdb1): 'recovery' is deprecated, use 'usebackuproot' instead
[18131.259417] BTRFS info (device sdb1): trying to use backup root at mount time
[18131.259424] BTRFS info (device sdb1): disabling disk space caching
[18131.259430] BTRFS info (device sdb1): force clearing of disk cache
[18131.259434] BTRFS info (device sdb1): has skinny extents
[18131.332905] BTRFS error (device sdb1): parent transid verify failed on 29392896 wanted 1486833 found 1486836
[18131.340976] BTRFS error (device sdb1): parent transid verify failed on 29392896 wanted 1486833 found 1486836
[18131.372068] BTRFS error (device sdb1): open_ctree failed
[20836.972274] audit: type=1400 audit(1501624982.455:57): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/nmbd" name="/var/log/samba/log.nmbd" pid=1713 comm="nmbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[31666.088054] audit: type=1400 audit(1501635811.572:58): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/nmbd" name="/var/log/samba/log.nmbd" pid=1713 comm="nmbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[43409.437677] audit: type=1400 audit(1501647554.923:59): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/nmbd" name="/var/log/samba/log.nmbd" pid=1713 comm="nmbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[54235.956270] audit: type=1400 audit(1501658381.440:60): apparmor="DENIED" operation="rename_src" profile="/usr/sbin/nmbd" name="/var/log/samba/log.nmbd" pid=1713 comm="nmbd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 8:27 Crashed filesystem, nothing helps Thomas Wurfbaum
2017-08-02 8:29 ` Thomas Wurfbaum
@ 2017-08-02 9:07 ` Hugo Mills
2017-08-02 9:17 ` Thomas Wurfbaum
1 sibling, 1 reply; 9+ messages in thread
From: Hugo Mills @ 2017-08-02 9:07 UTC (permalink / raw)
To: Thomas Wurfbaum; +Cc: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 8438 bytes --]
On Wed, Aug 02, 2017 at 10:27:50AM +0200, Thomas Wurfbaum wrote:
> Hello,
>
> Yesterday morning i recognized a hard reboot of my system, but the /data
> filesystem was
> not possible to mount.
>
>
> mainframe:~ # uname -a
> Linux mainframe 4.11.8-2-default #1 SMP PREEMPT Thu Jun 29 14:37:33 UTC 2017
> (42bd7a0) x86_64 x86_64 x86_64 GNU/Linux
> mainframe:~ # btrfs --version
> btrfs-progs v4.10.2+20170406
> mainframe:~ # btrfs fi show
> Label: none uuid: 22aaaa76-0885-4683-ac04-477c27cfab80
> Total devices 1 FS bytes used 2.88TiB
> devid 1 size 4.53TiB used 2.92TiB path /dev/sdb1
> mainframe:~ # btrfs restore /dev/sdb1 /mnt
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> Ignoring transid failure
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> Ignoring transid failure
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> Ignoring transid failure
> mainframe:~ # mount /dev/sdb1 /data
> mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
> missing codepage or helper program, or other error
>
> In some cases useful info is found in syslog - try
> dmesg | tail or so.
> mainframe:~ # mount -o usebackuproot /dev/sdb1 /data
> mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
> missing codepage or helper program, or other error
>
> In some cases useful info is found in syslog - try
> dmesg | tail or so.
> mainframe:~ # btrfs check /dev/sdb1
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> Ignoring transid failure
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> Ignoring transid failure
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> Ignoring transid failure
> Checking filesystem on /dev/sdb1
> UUID: 22aaaa76-0885-4683-ac04-477c27cfab80
> checking extents
> parent transid verify failed on 290766848 wanted 1486826 found 1486085
> parent transid verify failed on 290766848 wanted 1486826 found 1486085
> parent transid verify failed on 290766848 wanted 1486826 found 1486085
> parent transid verify failed on 290766848 wanted 1486826 found 1486085
> Ignoring transid failure
> parent transid verify failed on 292339712 wanted 1486826 found 1486086
> parent transid verify failed on 292339712 wanted 1486826 found 1486086
> parent transid verify failed on 291078144 wanted 1486826 found 1486085
> parent transid verify failed on 291078144 wanted 1486826 found 1486085
> parent transid verify failed on 291078144 wanted 1486826 found 1486085
> parent transid verify failed on 291078144 wanted 1486826 found 1486085
> Ignoring transid failure
> parent transid verify failed on 292978688 wanted 1486826 found 1486086
> parent transid verify failed on 292978688 wanted 1486826 found 1486086
> parent transid verify failed on 292978688 wanted 1486826 found 1486086
> parent transid verify failed on 292978688 wanted 1486826 found 1486086
> Ignoring transid failure
> parent transid verify failed on 292519936 wanted 1486826 found 1486086
> parent transid verify failed on 292519936 wanted 1486826 found 1486086
> parent transid verify failed on 292536320 wanted 1486826 found 1486086
> parent transid verify failed on 292536320 wanted 1486826 found 1486086
> parent transid verify failed on 292552704 wanted 1486826 found 1486086
> parent transid verify failed on 292552704 wanted 1486826 found 1486086
> parent transid verify failed on 292585472 wanted 1486826 found 1486086
> parent transid verify failed on 292585472 wanted 1486826 found 1486086
> parent transid verify failed on 292585472 wanted 1486826 found 1486086
> parent transid verify failed on 292585472 wanted 1486826 found 1486086
> Ignoring transid failure
> parent transid verify failed on 290766848 wanted 1486826 found 1486085
> Ignoring transid failure
> leaf parent key incorrect 290766848
> bad block 290766848
> ERROR: errors found in extent allocation tree or chunk allocation
> parent transid verify failed on 290766848 wanted 1486826 found 1486085
> Ignoring transid failure
> leaf parent key incorrect 290766848
> ERROR: failed to repair root items: Operation not permitted
> mainframe:~ # btrfs rescue super-recover /dev/sdb1
> All supers are valid, no need to recover
> mainframe:~ # btrfs rescue zero-log /dev/sdb1
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> Ignoring transid failure
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> Ignoring transid failure
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> Ignoring transid failure
> Clearing log on /dev/sdb1, previous log_root 0, level 0
> parent transid verify failed on 29474816 wanted 1486833 found 1486837
> Ignoring transid failure
> leaf parent key incorrect 29474816
> disk-io.c:524: update_cowonly_root: BUG_ON `ret` triggered, value -1
> btrfs(+0x26304)[0x555686369304]
> btrfs(btrfs_commit_transaction+0x98)[0x55568636aed8]
> btrfs(+0x69efa)[0x5556863acefa]
> btrfs(main+0x84)[0x555686361e34]
> /lib64/libc.so.6(__libc_start_main+0xf1)[0x7f43653df291]
> btrfs(_start+0x2a)[0x555686361f4a]
> Aborted (core dumped)
> mainframe:~ # btrfs rescue chunk-recover /dev/sdb1
> This command still runs, even after 15 hours.
> Is there anything else i could do?
Well, a good start would be to take a time machine and go back a
day or so and not run all the random recovery tools you can get your
hands on... Most of them are quite specialised (super-recover,
chunk-recover, zero-log). It's fairly unlikely that they've made
things worse, but it's not certain. Certainly zero-log will have
modified the filesystem. I don't know about the other two.
More productively, it's definitely worth trying to mount with the
-o usebackuproot option. (And -o usebackuproot,ro as well). The
transid verify failure is a small difference in generations, and it's
likely that the older metadata is still there. If that's the case, the
mount with usebackuproot will work, and you should be good to continue
as normal.
If that doesn't work, then btrfs restore to refresh your backups is
probably the way to go, followed by mkfs and restore from backup.
Hugo.
--
Hugo Mills | "How deep will this sub go?"
hugo@... carfax.org.uk | "Oh, she'll go all the way to the bottom if we don't
http://carfax.org.uk/ | stop her."
PGP: E2AB1DE4 | U571
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 9:07 ` Hugo Mills
@ 2017-08-02 9:17 ` Thomas Wurfbaum
2017-08-02 9:31 ` Roman Mamedov
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Wurfbaum @ 2017-08-02 9:17 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 2845 bytes --]
Maybe you are right, but i just followed the Suse guide:
https://en.opensuse.org/SDB:BTRFS
How to repair a broken/unmountable btrfs filesystem
I already tried the commands
mount with the
-o usebackuproot option. (And -o usebackuproot,ro as well)
But they just produce this in dmesg:
[61054.470771] BTRFS info (device sdb1): trying to use backup root at mount
time
[61054.470778] BTRFS info (device sdb1): disk space caching is enabled
[61054.470782] BTRFS info (device sdb1): has skinny extents
[61054.560876] BTRFS error (device sdb1): parent transid verify failed on
29392896 wanted 1486833 found 1486836
[61054.563423] BTRFS error (device sdb1): parent transid verify failed on
29392896 wanted 1486833 found 1486836
[61054.604057] BTRFS error (device sdb1): open_ctree failed
[61079.137435] BTRFS info (device sdb1): trying to use backup root at mount
time
[61079.137443] BTRFS info (device sdb1): disk space caching is enabled
[61079.137445] BTRFS info (device sdb1): has skinny extents
[61079.227242] BTRFS error (device sdb1): parent transid verify failed on
29392896 wanted 1486833 found 1486836
[61079.230087] BTRFS error (device sdb1): parent transid verify failed on
29392896 wanted 1486833 found 1486836
[61079.260062] BTRFS error (device sdb1): open_ctree failed
And on the cli i get the following:
mainframe:~ # mount -o usebackuproot,ro /dev/sdb1 /data
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so.
A restore does also not help:
mainframe:~ # btrfs restore /dev/sdb1 /mnt
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
parent transid verify failed on 29392896 wanted 1486833 found 1486836
Ignoring transid failure
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
parent transid verify failed on 29409280 wanted 1486829 found 1486833
Ignoring transid failure
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
parent transid verify failed on 29376512 wanted 1327723 found 1486833
Ignoring transid failure
--
Thomas Wurfbaum
Starkertshofen 15
85084 Reichertshofen
Tel.: +49-160-3696336
Mail: thomas@wurfbaum.net
Google+:http://google.com/+ThomasWurfbaum
Facebook: https://www.facebook.com/profile.php?id=100006061335414
Xing: https://www.xing.com/profile/Thomas_Wurfbaum
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 9:17 ` Thomas Wurfbaum
@ 2017-08-02 9:31 ` Roman Mamedov
2017-08-02 9:33 ` Thomas Wurfbaum
0 siblings, 1 reply; 9+ messages in thread
From: Roman Mamedov @ 2017-08-02 9:31 UTC (permalink / raw)
To: Thomas Wurfbaum; +Cc: linux-btrfs
On Wed, 02 Aug 2017 11:17:04 +0200
Thomas Wurfbaum <thomas@wurfbaum.net> wrote:
> A restore does also not help:
> mainframe:~ # btrfs restore /dev/sdb1 /mnt
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> parent transid verify failed on 29392896 wanted 1486833 found 1486836
> Ignoring transid failure
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> parent transid verify failed on 29409280 wanted 1486829 found 1486833
> Ignoring transid failure
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> parent transid verify failed on 29376512 wanted 1327723 found 1486833
> Ignoring transid failure
Did it just abruptly exit there? Or you terminated it?
IIRC these messages (about ignoring) are not a problem for restore, it should
be able to continue. Or if not, it would print a more definitive error
message, e.g. "Couldn't read tree root" or such.
--
With respect,
Roman
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 9:31 ` Roman Mamedov
@ 2017-08-02 9:33 ` Thomas Wurfbaum
2017-08-02 9:41 ` Thomas Wurfbaum
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Wurfbaum @ 2017-08-02 9:33 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 435 bytes --]
Am Mittwoch, 2. August 2017, 11:31:41 CEST schrieb Roman Mamedov:
> Did it just abruptly exit there? Or you terminated it?
It apruptly stopped there
Regards,
Thomas
--
Thomas Wurfbaum
Starkertshofen 15
85084 Reichertshofen
Tel.: +49-160-3696336
Mail: thomas@wurfbaum.net
Google+:http://google.com/+ThomasWurfbaum
Facebook: https://www.facebook.com/profile.php?id=100006061335414
Xing: https://www.xing.com/profile/Thomas_Wurfbaum
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 9:33 ` Thomas Wurfbaum
@ 2017-08-02 9:41 ` Thomas Wurfbaum
2017-08-07 5:12 ` Thomas Wurfbaum
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Wurfbaum @ 2017-08-02 9:41 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 1439 bytes --]
With the help of btrfs-corrupt-block i was able to get a little bit farer.
I marked some of my problem block corrupt.
Now i am in this stage
mainframe:~ # btrfs restore /dev/sdb1 /mnt
parent transid verify failed on 29409280 wanted 1486829 found 1488801
parent transid verify failed on 29409280 wanted 1486829 found 1488801
parent transid verify failed on 29409280 wanted 1486829 found 1488801
parent transid verify failed on 29409280 wanted 1486829 found 1488801
Ignoring transid failure
parent transid verify failed on 29376512 wanted 1327723 found 1489835
parent transid verify failed on 29376512 wanted 1327723 found 1489835
parent transid verify failed on 29376512 wanted 1327723 found 1489835
parent transid verify failed on 29376512 wanted 1327723 found 1489835
Ignoring transid failure
parent transid verify failed on 29786112 wanted 1489835 found 1489871
parent transid verify failed on 29786112 wanted 1489835 found 1489871
parent transid verify failed on 29786112 wanted 1489835 found 1489871
parent transid verify failed on 29786112 wanted 1489835 found 1489871
Ignoring transid failure
leaf parent key incorrect 29786112
Error searching -1
Regards,
Thomas
--
Thomas Wurfbaum
Starkertshofen 15
85084 Reichertshofen
Tel.: +49-160-3696336
Mail: thomas@wurfbaum.net
Google+:http://google.com/+ThomasWurfbaum
Facebook: https://www.facebook.com/profile.php?id=100006061335414
Xing: https://www.xing.com/profile/Thomas_Wurfbaum
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-02 9:41 ` Thomas Wurfbaum
@ 2017-08-07 5:12 ` Thomas Wurfbaum
2017-08-07 8:47 ` Henk Slager
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Wurfbaum @ 2017-08-07 5:12 UTC (permalink / raw)
To: linux-btrfs
[-- Attachment #1: Type: text/plain, Size: 880 bytes --]
Now i do a btrfs-find-root, but it runs now since 5 day without a result.
How long should i wait? Or is it already to late to hope?
mainframe:~ # btrfs-find-root.static /dev/sdb1
parent transid verify failed on 29376512 wanted 1327723 found 1489835
parent transid verify failed on 29376512 wanted 1327723 found 1489835
parent transid verify failed on 29376512 wanted 1327723 found 1489835
parent transid verify failed on 29376512 wanted 1327723 found 1489835
Ignoring transid failure
Superblock thinks the generation is 1490226
Superblock thinks the level is 1
The process is still running...
Regards,
Thomas
--
Thomas Wurfbaum
Starkertshofen 15
85084 Reichertshofen
Tel.: +49-160-3696336
Mail: thomas@wurfbaum.net
Google+:http://google.com/+ThomasWurfbaum
Facebook: https://www.facebook.com/profile.php?id=100006061335414
Xing: https://www.xing.com/profile/Thomas_Wurfbaum
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Crashed filesystem, nothing helps
2017-08-07 5:12 ` Thomas Wurfbaum
@ 2017-08-07 8:47 ` Henk Slager
0 siblings, 0 replies; 9+ messages in thread
From: Henk Slager @ 2017-08-07 8:47 UTC (permalink / raw)
To: thomas; +Cc: linux-btrfs
On Mon, Aug 7, 2017 at 7:12 AM, Thomas Wurfbaum <thomas@wurfbaum.net> wrote:
> Now i do a btrfs-find-root, but it runs now since 5 day without a result.
> How long should i wait? Or is it already to late to hope?
>
> mainframe:~ # btrfs-find-root.static /dev/sdb1
> parent transid verify failed on 29376512 wanted 1327723 found 1489835
> parent transid verify failed on 29376512 wanted 1327723 found 1489835
> parent transid verify failed on 29376512 wanted 1327723 found 1489835
> parent transid verify failed on 29376512 wanted 1327723 found 1489835
> Ignoring transid failure
> Superblock thinks the generation is 1490226
> Superblock thinks the level is 1
>
> The process is still running...
I also have a filesystem that has a big difference in wanted and found
transid. I my case the wanted is much higher than the found. I also
tried to repair it for more than 2 weeks in total, but both progs and
kernel fail. I haven't seen that you mounted it just with only ro
mount option. I think in your case chances are low, but it worked in
my case. I could copy all data (7TB unique non-shared thorugh snapshot
or reflink) to a new fs with rsync. Btrfs send and other action done
by btrfs progs quite soon failed on 1 or several parent transid
inconsistencies.
Others on this forum have stated that when there is such a big
difference in transid, the fs is simple unrepairable. I must admit
that this is the truth in practice. Restore with btrfs-restore I tried
once on a other fs that was damaged and at that time the restore gave
quite different content for some file compared to a copy of the same
file from the fs mouted via the kernel.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2017-08-07 8:47 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-02 8:27 Crashed filesystem, nothing helps Thomas Wurfbaum
2017-08-02 8:29 ` Thomas Wurfbaum
2017-08-02 9:07 ` Hugo Mills
2017-08-02 9:17 ` Thomas Wurfbaum
2017-08-02 9:31 ` Roman Mamedov
2017-08-02 9:33 ` Thomas Wurfbaum
2017-08-02 9:41 ` Thomas Wurfbaum
2017-08-07 5:12 ` Thomas Wurfbaum
2017-08-07 8:47 ` Henk Slager
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.