All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v3 00/13] Add Marvell Armada A38x 88F6820 SoC support
Date: Sat, 2 May 2015 14:59:00 -0600	[thread overview]
Message-ID: <CAPnjgZ0YPBHeRkcWFqPkwPUz1-=kZ86SMHHhbQdC=JKtratrtw@mail.gmail.com> (raw)
In-Reply-To: <1429936196-13647-1-git-send-email-sr@denx.de>

Hi Stefan,

On 24 April 2015 at 22:29, Stefan Roese <sr@denx.de> wrote:
>
> This patch series adds support for the Marvell Armada A38x SoC's. Specifically
> the 88F6820 / 88F6828.
>
> Basic support for the DB-88F6820-GP evaluation board is added. Supporting the
> following interfaces:
> - UART
> - SPI (including SPI NOR flash)
> - I2C
> - Ethernet (neta)
>
> One big part of this new SoC support is the move of the already exisiting
> Armada XP support into the "mach-mvebu" directory. With this move its
> easier to re-use this code for the A38x, which is pretty similar to the
> AXP.

When I try to build this I get an error - its wants a 'binard.0' file.
It talks about extracting this from an 'existing image'. Is it not
available as source code? If not, is there a README explaining where
to get it?

The build fails because of this. If this is the intended final state
then I think you should define an environment variable to enable the
binary build, so that we don't get buildman errors. For x86 (which has
serious problems with binary blobs still) we use BUILD_ROM for this.
It probably isn't a very good name for you, but you could create your
own.

>
> Thanks,
> Stefan
>
> Changes in v3:
> - Removed coherency feature as its not used in U-Boot at all as pointed
>   out by Thomas Petazzoni
> - Changed CONFIG_I2C_MVTWSI_BASE to CONFIG_I2C_MVTWSI_BASE0 for updates
>   in mvtwsi I2C driver
> - Added Tested-by from Dirk and Kevin
>
> Changes in v2:
> - Made mvebu_soc_family() globally available so that it can be called
>   from mbus.c
> - Add PL310 L2 cache base address
> - Update to 256KiB env sector as required for M25P128
> - Add I2C IO expander initialization (fan etc)
> - Enable PL310 L2 cache as this is needed for correct caching OPs
>
> Stefan Roese (13):
>   arm: armada-xp: Move SoC sources to mach-mvebu
>   arm: armada-xp: Move SoC headers to mach-mvebu/include/mach
>   arm: mvebu: Move mvebu-common into mach-mvebu
>   arm: mvebu: Change header macros from ARMADA_XP to MVEBU
>   arm: mvebu: Remove unreferenced define
>   arm: mvebu: Only define MV88F78X60 for Armada XP
>   arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header
>   arm: mvebu: Add basic Armada 38x support
>   arm: mvebu: Change network init code to allow a more flexible setup
>   arm: mvebu: Remove coherency configuration
>   arm: mvebu: mv-common.h: Add CONFIG_PREBOOT
>   arm: mvebu: Add d-cache invalidate before enabling the d-cache
>   arm: mvebu: Add Armada A38x DB-88F6820-GP board support
>
>  arch/arm/Kconfig                                   |   6 ++
>  arch/arm/Makefile                                  |   5 +-
>  arch/arm/cpu/armv7/Makefile                        |   1 -
>  arch/arm/cpu/armv7/armada-xp/Makefile              |   9 --
>  arch/arm/mach-mvebu/Makefile                       |  24 +++++
>  arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/cpu.c |  96 +++++++++++++++----
>  arch/arm/{mvebu-common => mach-mvebu}/dram.c       |   0
>  arch/arm/{mvebu-common => mach-mvebu}/gpio.c       |   0
>  .../include/mach}/config.h                         |  15 ++-
>  .../include/mach}/cpu.h                            |  13 ++-
>  .../include/mach}/soc.h                            |  20 ++--
>  .../armv7/armada-xp => mach-mvebu}/lowlevel_spl.S  |   0
>  arch/arm/{mvebu-common => mach-mvebu}/mbus.c       |   3 -
>  .../{mvebu-common => mach-mvebu}/serdes/Makefile   |   0
>  .../serdes/board_env_spec.h                        |   0
>  .../serdes/high_speed_env_lib.c                    |   0
>  .../serdes/high_speed_env_spec.c                   |   0
>  .../serdes/high_speed_env_spec.h                   |   0
>  arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/spl.c |   0
>  arch/arm/{mvebu-common => mach-mvebu}/timer.c      |   0
>  .../{mvebu-common => mach-mvebu}/u-boot-spl.lds    |   0
>  board/Marvell/db-88f6820-gp/Kconfig                |  15 +++
>  board/Marvell/db-88f6820-gp/Makefile               |   7 ++
>  board/Marvell/db-88f6820-gp/binary.0               |  16 ++++
>  board/Marvell/db-88f6820-gp/db-88f6820-gp.c        | 103 +++++++++++++++++++++
>  board/Marvell/db-88f6820-gp/kwbimage.cfg           |  12 +++
>  board/Marvell/db-mv784mp-gp/Kconfig                |   2 +-
>  board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c        |   3 +-
>  board/maxbcm/Kconfig                               |   2 +-
>  board/maxbcm/maxbcm.c                              |   2 +-
>  configs/db-88f6820-gp_defconfig                    |   2 +
>  include/configs/db-88f6820-gp.h                    |  72 ++++++++++++++
>  include/configs/db-mv784mp-gp.h                    |   3 +-
>  include/configs/maxbcm.h                           |   3 +-
>  include/configs/mv-common.h                        |   1 +
>  35 files changed, 378 insertions(+), 57 deletions(-)
>  delete mode 100644 arch/arm/cpu/armv7/armada-xp/Makefile
>  create mode 100644 arch/arm/mach-mvebu/Makefile
>  rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/cpu.c (71%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/dram.c (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/gpio.c (100%)
>  rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/config.h (86%)
>  rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/cpu.h (93%)
>  rename arch/arm/{include/asm/arch-armada-xp => mach-mvebu/include/mach}/soc.h (81%)
>  rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/lowlevel_spl.S (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/mbus.c (99%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/serdes/Makefile (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/serdes/board_env_spec.h (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_lib.c (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_spec.c (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/serdes/high_speed_env_spec.h (100%)
>  rename arch/arm/{cpu/armv7/armada-xp => mach-mvebu}/spl.c (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/timer.c (100%)
>  rename arch/arm/{mvebu-common => mach-mvebu}/u-boot-spl.lds (100%)
>  create mode 100644 board/Marvell/db-88f6820-gp/Kconfig
>  create mode 100644 board/Marvell/db-88f6820-gp/Makefile
>  create mode 100644 board/Marvell/db-88f6820-gp/binary.0
>  create mode 100644 board/Marvell/db-88f6820-gp/db-88f6820-gp.c
>  create mode 100644 board/Marvell/db-88f6820-gp/kwbimage.cfg
>  create mode 100644 configs/db-88f6820-gp_defconfig
>  create mode 100644 include/configs/db-88f6820-gp.h
>
> --
> 2.3.6
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

Regards,
Simon

  parent reply	other threads:[~2015-05-02 20:59 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-25  4:29 [U-Boot] [RESEND PATCH v3 00/13] Add Marvell Armada A38x 88F6820 SoC support Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 01/13] arm: armada-xp: Move SoC sources to mach-mvebu Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 02/13] arm: armada-xp: Move SoC headers to mach-mvebu/include/mach Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 03/13] arm: mvebu: Move mvebu-common into mach-mvebu Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 04/13] arm: mvebu: Change header macros from ARMADA_XP to MVEBU Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 05/13] arm: mvebu: Remove unreferenced define Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 06/13] arm: mvebu: Only define MV88F78X60 for Armada XP Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 07/13] arm: mvebu: Move CONFIG_SPL_LDSCRIPT to common header Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 08/13] arm: mvebu: Add basic Armada 38x support Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 09/13] arm: mvebu: Change network init code to allow a more flexible setup Stefan Roese
2015-05-04 22:50   ` Joe Hershberger
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 10/13] arm: mvebu: Remove coherency configuration Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 11/13] arm: mvebu: mv-common.h: Add CONFIG_PREBOOT Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 12/13] arm: mvebu: Add d-cache invalidate before enabling the d-cache Stefan Roese
2015-04-25  4:29 ` [U-Boot] [RESEND PATCH v3 13/13] arm: mvebu: Add Armada A38x DB-88F6820-GP board support Stefan Roese
2015-05-02 20:59 ` Simon Glass [this message]
2015-05-03  9:16   ` [U-Boot] [RESEND PATCH v3 00/13] Add Marvell Armada A38x 88F6820 SoC support Stefan Roese
2015-05-03 17:20     ` Simon Glass
2015-05-04  7:50       ` Stefan Roese
2015-05-04 12:08         ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAPnjgZ0YPBHeRkcWFqPkwPUz1-=kZ86SMHHhbQdC=JKtratrtw@mail.gmail.com' \
    --to=sjg@chromium.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.