[U-Boot] Please pull u-boot-fdt

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

This is mostly syncing up with upstream. I have a few more things to do
also (some small, some large).


The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:

  Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
09:33:37 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:

  libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)

----------------------------------------------------------------
David Gibson (1):
      libfdt: Fix undefined behaviour in fdt_offset_ptr()

Hannes Schmelzer (1):
      cmd/fdt: add possibilty to have 'extrasize' on fdt resize

Simon Glass (4):
      libfdt: Sync up with upstream
      libfdt: Bring in upstream stringlist functions
      libfdt: Sync fdt_for_each_subnode() with upstream
      libfdt: Drop inlining of fdt_path_offset()

 arch/arm/mach-tegra/xusb-padctl-common.c |  18 +++++-----
 arch/arm/mach-uniphier/board_late_init.c |   5 ++-
 arch/x86/cpu/irq.c                       |   5 +--
 board/compulab/cm_fx6/cm_fx6.c           |   2 +-
 cmd/fdt.c                                |   9 +++--
 common/fdt_support.c                     |   3 +-
 common/image-fdt.c                       |   2 +-
 common/image-fit.c                       |  21 +++++------
 common/image-sig.c                       |   8 ++---
 common/image.c                           |  19 +++++-----
 drivers/clk/clk-uclass.c                 |   6 ++--
 drivers/core/device.c                    |   2 +-
 drivers/gpio/dwapb_gpio.c                |   3 +-
 drivers/i2c/mxc_i2c.c                    |   2 +-
 drivers/mailbox/mailbox-uclass.c         |   6 ++--
 drivers/net/cpsw.c                       |   2 +-
 drivers/net/keystone_net.c               |   4 +--
 drivers/net/mvpp2.c                      |   2 +-
 drivers/net/sun8i_emac.c                 |   5 +--
 drivers/pci/pci_tegra.c                  |   2 +-
 drivers/phy/marvell/comphy_core.c        |   2 +-
 drivers/pinctrl/exynos/pinctrl-exynos.c  |   9 +++--
 drivers/pinctrl/meson/pinctrl-meson.c    |   4 +--
 drivers/pinctrl/pinctrl-generic.c        |  10 +++---
 drivers/pinctrl/pinctrl-uclass.c         |   2 +-
 drivers/reset/reset-uclass.c             |   6 ++--
 drivers/spi/fsl_qspi.c                   |   2 +-
 drivers/video/sunxi_display.c            |   2 +-
 include/fdt_support.h                    |  10 +++++-
 include/libfdt.h                         | 187
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
-------------------------------------
 lib/fdtdec.c                             |   4 +--
 lib/libfdt/fdt.c                         |  13 +++----
 lib/libfdt/fdt_overlay.c                 |   8 ++---
 lib/libfdt/fdt_ro.c                      | 119
++++++++++++++++++++++++++++++++++++++------------------------
 lib/libfdt/fdt_rw.c                      |   4 ++-
 lib/libfdt/fdt_wip.c                     |   6 ++--
 test/overlay/cmd_ut_overlay.c            |   5 ++-
 37 files changed, 298 insertions(+), 221 deletions(-)


Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:

> Hi Tom,
> 
> This is mostly syncing up with upstream. I have a few more things to do
> also (some small, some large).
> 
> 
> The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
> 
>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
> 09:33:37 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
> 
>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
> 

Something in here is breaking my TI J6 Eco platform.  I'll try and kick
a rebase and bisect of just this series later to pinpoint which one is
at fault (I'm testing all of the other stuff that piled up while my
power was out atm).  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161012/14a52b53/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>
>> Hi Tom,
>>
>> This is mostly syncing up with upstream. I have a few more things to do
>> also (some small, some large).
>>
>>
>> The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>
>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>> 09:33:37 -0400)
>>
>> are available in the git repository at:
>>
>>   git://git.denx.de/u-boot-fdt.git
>>
>> for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
>>
>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
>>
>
> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
> a rebase and bisect of just this series later to pinpoint which one is
> at fault (I'm testing all of the other stuff that piled up while my
> power was out atm).  Thanks!

OK, let's hold off on this one until I've had time to do more testing also.

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Keerthy]

On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
> Hi Tom,
>
> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>
>>> Hi Tom,
>>>
>>> This is mostly syncing up with upstream. I have a few more things to do
>>> also (some small, some large).
>>>
>>>
>>> The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>
>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>> 09:33:37 -0400)
>>>
>>> are available in the git repository at:
>>>
>>>   git://git.denx.de/u-boot-fdt.git
>>>
>>> for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>
>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
>>>
>>
>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>> a rebase and bisect of just this series later to pinpoint which one is
>> at fault (I'm testing all of the other stuff that piled up while my
>> power was out atm).  Thanks!
>
> OK, let's hold off on this one until I've had time to do more testing also.

Seems like: pulling git://git.denx.de/u-boot-dm.git or 
git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.

When i pull both i see a boot hang at the u-boot stage.

Log:

U-Boot SPL 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06)
DRA722-GP ES1.0
Trying to boot from MMC1
*** Warning - bad CRC, using default environment

reading u-boot.img
reading u-boot.img
reading u-boot.img
reading u-boot.img


U-Boot 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06 +0530)

CPU  : DRA722-GP ES1.0
Model: TI DRA722
Board: DRA72x EVM REV <NULL>
DRAM:  1 GiB

>
> Regards,
> Simon
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

[U-Boot] Please pull u-boot-fdt

[Keerthy]

On Thursday 13 October 2016 03:13 PM, Keerthy wrote:
>
>
> On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
>> Hi Tom,
>>
>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> This is mostly syncing up with upstream. I have a few more things to do
>>>> also (some small, some large).
>>>>
>>>>
>>>> The following changes since commit
>>>> f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>>
>>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>>> 09:33:37 -0400)
>>>>
>>>> are available in the git repository at:
>>>>
>>>>   git://git.denx.de/u-boot-fdt.git
>>>>
>>>> for you to fetch changes up to
>>>> 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>>
>>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46
>>>> -0600)
>>>>
>>>
>>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>>> a rebase and bisect of just this series later to pinpoint which one is
>>> at fault (I'm testing all of the other stuff that piled up while my
>>> power was out atm).  Thanks!
>>
>> OK, let's hold off on this one until I've had time to do more testing
>> also.
>
> Seems like: pulling git://git.denx.de/u-boot-dm.git or
> git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.
>
> When i pull both i see a boot hang at the u-boot stage.

Tom/Simon,

I found that patch:
commit 8985d1059ab2cc9a42e827494e6030adca27145a
Author: Simon Glass <sjg@chromium.org>
Date:   Sun Oct 2 17:59:29 2016 -0600

     libfdt: Sync fdt_for_each_subnode() with upstream

Changes the signature of fdt_for_each_subnode.

Hence the u-boot hang in dra72.

I will send couple of patches which will take care of this signature change.

Regards,
Keerthy

>
> Log:
>
> U-Boot SPL 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06)
> DRA722-GP ES1.0
> Trying to boot from MMC1
> *** Warning - bad CRC, using default environment
>
> reading u-boot.img
> reading u-boot.img
> reading u-boot.img
> reading u-boot.img
>
>
> U-Boot 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06 +0530)
>
> CPU  : DRA722-GP ES1.0
> Model: TI DRA722
> Board: DRA72x EVM REV <NULL>
> DRAM:  1 GiB
>
>>
>> Regards,
>> Simon
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Thu, Oct 13, 2016 at 05:17:40PM +0530, Keerthy wrote:
> 
> 
> On Thursday 13 October 2016 03:13 PM, Keerthy wrote:
> >
> >
> >On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
> >>Hi Tom,
> >>
> >>On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
> >>>On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
> >>>
> >>>>Hi Tom,
> >>>>
> >>>>This is mostly syncing up with upstream. I have a few more things to do
> >>>>also (some small, some large).
> >>>>
> >>>>
> >>>>The following changes since commit
> >>>>f5fd45ff64e28a73499548358e3d1ceda0de7daf:
> >>>>
> >>>>  Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
> >>>>09:33:37 -0400)
> >>>>
> >>>>are available in the git repository at:
> >>>>
> >>>>  git://git.denx.de/u-boot-fdt.git
> >>>>
> >>>>for you to fetch changes up to
> >>>>7f899e436fe1e952950a14df92600d68d55dea5c:
> >>>>
> >>>>  libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46
> >>>>-0600)
> >>>>
> >>>
> >>>Something in here is breaking my TI J6 Eco platform.  I'll try and kick
> >>>a rebase and bisect of just this series later to pinpoint which one is
> >>>at fault (I'm testing all of the other stuff that piled up while my
> >>>power was out atm).  Thanks!
> >>
> >>OK, let's hold off on this one until I've had time to do more testing
> >>also.
> >
> >Seems like: pulling git://git.denx.de/u-boot-dm.git or
> >git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.
> >
> >When i pull both i see a boot hang at the u-boot stage.
> 
> Tom/Simon,
> 
> I found that patch:
> commit 8985d1059ab2cc9a42e827494e6030adca27145a
> Author: Simon Glass <sjg@chromium.org>
> Date:   Sun Oct 2 17:59:29 2016 -0600
> 
>     libfdt: Sync fdt_for_each_subnode() with upstream
> 
> Changes the signature of fdt_for_each_subnode.
> 
> Hence the u-boot hang in dra72.
> 
> I will send couple of patches which will take care of this signature change.

Ah, good catch.  Simon, how do you want me to take this?  I'm thinking I
should take -dm and you can add these changes to -fdt and resubmit that.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161013/c490dee9/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

On 13 October 2016 at 06:11, Tom Rini <trini@konsulko.com> wrote:
> On Thu, Oct 13, 2016 at 05:17:40PM +0530, Keerthy wrote:
>>
>>
>> On Thursday 13 October 2016 03:13 PM, Keerthy wrote:
>> >
>> >
>> >On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
>> >>Hi Tom,
>> >>
>> >>On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>> >>>On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>> >>>
>> >>>>Hi Tom,
>> >>>>
>> >>>>This is mostly syncing up with upstream. I have a few more things to do
>> >>>>also (some small, some large).
>> >>>>
>> >>>>
>> >>>>The following changes since commit
>> >>>>f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>> >>>>
>> >>>>  Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>> >>>>09:33:37 -0400)
>> >>>>
>> >>>>are available in the git repository at:
>> >>>>
>> >>>>  git://git.denx.de/u-boot-fdt.git
>> >>>>
>> >>>>for you to fetch changes up to
>> >>>>7f899e436fe1e952950a14df92600d68d55dea5c:
>> >>>>
>> >>>>  libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46
>> >>>>-0600)
>> >>>>
>> >>>
>> >>>Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>> >>>a rebase and bisect of just this series later to pinpoint which one is
>> >>>at fault (I'm testing all of the other stuff that piled up while my
>> >>>power was out atm).  Thanks!
>> >>
>> >>OK, let's hold off on this one until I've had time to do more testing
>> >>also.
>> >
>> >Seems like: pulling git://git.denx.de/u-boot-dm.git or
>> >git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.
>> >
>> >When i pull both i see a boot hang at the u-boot stage.
>>
>> Tom/Simon,
>>
>> I found that patch:
>> commit 8985d1059ab2cc9a42e827494e6030adca27145a
>> Author: Simon Glass <sjg@chromium.org>
>> Date:   Sun Oct 2 17:59:29 2016 -0600
>>
>>     libfdt: Sync fdt_for_each_subnode() with upstream
>>
>> Changes the signature of fdt_for_each_subnode.
>>
>> Hence the u-boot hang in dra72.
>>
>> I will send couple of patches which will take care of this signature change.
>
> Ah, good catch.  Simon, how do you want me to take this?  I'm thinking I
> should take -dm and you can add these changes to -fdt and resubmit that.

Yes that sounds good, thanks.

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Keerthy,

On 13 October 2016 at 05:47, Keerthy <a0393675@ti.com> wrote:
>
>
> On Thursday 13 October 2016 03:13 PM, Keerthy wrote:
>>
>>
>>
>> On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
>>>
>>> Hi Tom,
>>>
>>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>>>
>>>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>>>
>>>>> Hi Tom,
>>>>>
>>>>> This is mostly syncing up with upstream. I have a few more things to do
>>>>> also (some small, some large).
>>>>>
>>>>>
>>>>> The following changes since commit
>>>>> f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>>>
>>>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>>>> 09:33:37 -0400)
>>>>>
>>>>> are available in the git repository at:
>>>>>
>>>>>   git://git.denx.de/u-boot-fdt.git
>>>>>
>>>>> for you to fetch changes up to
>>>>> 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>>>
>>>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46
>>>>> -0600)
>>>>>
>>>>
>>>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>>>> a rebase and bisect of just this series later to pinpoint which one is
>>>> at fault (I'm testing all of the other stuff that piled up while my
>>>> power was out atm).  Thanks!
>>>
>>>
>>> OK, let's hold off on this one until I've had time to do more testing
>>> also.
>>
>>
>> Seems like: pulling git://git.denx.de/u-boot-dm.git or
>> git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.
>>
>> When i pull both i see a boot hang at the u-boot stage.
>
>
> Tom/Simon,
>
> I found that patch:
> commit 8985d1059ab2cc9a42e827494e6030adca27145a
> Author: Simon Glass <sjg@chromium.org>
> Date:   Sun Oct 2 17:59:29 2016 -0600
>
>     libfdt: Sync fdt_for_each_subnode() with upstream
>
> Changes the signature of fdt_for_each_subnode.
>
> Hence the u-boot hang in dra72.
>
> I will send couple of patches which will take care of this signature change.

Thanks for looking at this. The signature change is intentional in
order to sync up with upstream. I suspect there is something wrong
with the patch (or one of the others).

Regards,
Simon


>
> Regards,
> Keerthy
>
>
>>
>> Log:
>>
>> U-Boot SPL 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06)
>> DRA722-GP ES1.0
>> Trying to boot from MMC1
>> *** Warning - bad CRC, using default environment
>>
>> reading u-boot.img
>> reading u-boot.img
>> reading u-boot.img
>> reading u-boot.img
>>
>>
>> U-Boot 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06 +0530)
>>
>> CPU  : DRA722-GP ES1.0
>> Model: TI DRA722
>> Board: DRA72x EVM REV <NULL>
>> DRAM:  1 GiB
>>
>>>
>>> Regards,
>>> Simon
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Please pull u-boot-fdt

[Keerthy]

On Thursday 13 October 2016 06:08 PM, Simon Glass wrote:
> Hi Keerthy,
>
> On 13 October 2016 at 05:47, Keerthy <a0393675@ti.com> wrote:
>>
>>
>> On Thursday 13 October 2016 03:13 PM, Keerthy wrote:
>>>
>>>
>>>
>>> On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
>>>>
>>>> Hi Tom,
>>>>
>>>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>>>>
>>>>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>>>>
>>>>>> Hi Tom,
>>>>>>
>>>>>> This is mostly syncing up with upstream. I have a few more things to do
>>>>>> also (some small, some large).
>>>>>>
>>>>>>
>>>>>> The following changes since commit
>>>>>> f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>>>>
>>>>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>>>>> 09:33:37 -0400)
>>>>>>
>>>>>> are available in the git repository at:
>>>>>>
>>>>>>   git://git.denx.de/u-boot-fdt.git
>>>>>>
>>>>>> for you to fetch changes up to
>>>>>> 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>>>>
>>>>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46
>>>>>> -0600)
>>>>>>
>>>>>
>>>>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>>>>> a rebase and bisect of just this series later to pinpoint which one is
>>>>> at fault (I'm testing all of the other stuff that piled up while my
>>>>> power was out atm).  Thanks!
>>>>
>>>>
>>>> OK, let's hold off on this one until I've had time to do more testing
>>>> also.
>>>
>>>
>>> Seems like: pulling git://git.denx.de/u-boot-dm.git or
>>> git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.
>>>
>>> When i pull both i see a boot hang at the u-boot stage.
>>
>>
>> Tom/Simon,
>>
>> I found that patch:
>> commit 8985d1059ab2cc9a42e827494e6030adca27145a
>> Author: Simon Glass <sjg@chromium.org>
>> Date:   Sun Oct 2 17:59:29 2016 -0600
>>
>>     libfdt: Sync fdt_for_each_subnode() with upstream
>>
>> Changes the signature of fdt_for_each_subnode.
>>
>> Hence the u-boot hang in dra72.
>>
>> I will send couple of patches which will take care of this signature change.
>
> Thanks for looking at this. The signature change is intentional in
> order to sync up with upstream. I suspect there is something wrong
> with the patch (or one of the others).

I have sent couple of patches already :-). They take care of the changes 
for libfdt.

>
> Regards,
> Simon
>
>
>>
>> Regards,
>> Keerthy
>>
>>
>>>
>>> Log:
>>>
>>> U-Boot SPL 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06)
>>> DRA722-GP ES1.0
>>> Trying to boot from MMC1
>>> *** Warning - bad CRC, using default environment
>>>
>>> reading u-boot.img
>>> reading u-boot.img
>>> reading u-boot.img
>>> reading u-boot.img
>>>
>>>
>>> U-Boot 2016.11-rc1-00191-g8d9b7ac (Oct 13 2016 - 15:06:06 +0530)
>>>
>>> CPU  : DRA722-GP ES1.0
>>> Model: TI DRA722
>>> Board: DRA72x EVM REV <NULL>
>>> DRAM:  1 GiB
>>>
>>>>
>>>> Regards,
>>>> Simon
>>>> _______________________________________________
>>>> U-Boot mailing list
>>>> U-Boot at lists.denx.de
>>>> http://lists.denx.de/mailman/listinfo/u-boot
>>>>
>>> _______________________________________________
>>> U-Boot mailing list
>>> U-Boot at lists.denx.de
>>> http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Keerthy,

On 13 October 2016 at 06:39, Keerthy <a0393675@ti.com> wrote:
>
>
> On Thursday 13 October 2016 06:08 PM, Simon Glass wrote:
>>
>> Hi Keerthy,
>>
>> On 13 October 2016 at 05:47, Keerthy <a0393675@ti.com> wrote:
>>>
>>>
>>>
>>> On Thursday 13 October 2016 03:13 PM, Keerthy wrote:
>>>>
>>>>
>>>>
>>>>
>>>> On Wednesday 12 October 2016 08:13 PM, Simon Glass wrote:
>>>>>
>>>>>
>>>>> Hi Tom,
>>>>>
>>>>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>>>>>
>>>>>>
>>>>>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>>>>>
>>>>>>> Hi Tom,
>>>>>>>
>>>>>>> This is mostly syncing up with upstream. I have a few more things to
>>>>>>> do
>>>>>>> also (some small, some large).
>>>>>>>
>>>>>>>
>>>>>>> The following changes since commit
>>>>>>> f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>>>>>
>>>>>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx
>>>>>>> (2016-10-08
>>>>>>> 09:33:37 -0400)
>>>>>>>
>>>>>>> are available in the git repository at:
>>>>>>>
>>>>>>>   git://git.denx.de/u-boot-fdt.git
>>>>>>>
>>>>>>> for you to fetch changes up to
>>>>>>> 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>>>>>
>>>>>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46
>>>>>>> -0600)
>>>>>>>
>>>>>>
>>>>>> Something in here is breaking my TI J6 Eco platform.  I'll try and
>>>>>> kick
>>>>>> a rebase and bisect of just this series later to pinpoint which one is
>>>>>> at fault (I'm testing all of the other stuff that piled up while my
>>>>>> power was out atm).  Thanks!
>>>>>
>>>>>
>>>>>
>>>>> OK, let's hold off on this one until I've had time to do more testing
>>>>> also.
>>>>
>>>>
>>>>
>>>> Seems like: pulling git://git.denx.de/u-boot-dm.git or
>>>> git://git.denx.de/u-boot-fdt.git alone works fine on DRA72.
>>>>
>>>> When i pull both i see a boot hang at the u-boot stage.
>>>
>>>
>>>
>>> Tom/Simon,
>>>
>>> I found that patch:
>>> commit 8985d1059ab2cc9a42e827494e6030adca27145a
>>> Author: Simon Glass <sjg@chromium.org>
>>> Date:   Sun Oct 2 17:59:29 2016 -0600
>>>
>>>     libfdt: Sync fdt_for_each_subnode() with upstream
>>>
>>> Changes the signature of fdt_for_each_subnode.
>>>
>>> Hence the u-boot hang in dra72.
>>>
>>> I will send couple of patches which will take care of this signature
>>> change.
>>
>>
>> Thanks for looking at this. The signature change is intentional in
>> order to sync up with upstream. I suspect there is something wrong
>> with the patch (or one of the others).
>
>
> I have sent couple of patches already :-). They take care of the changes for
> libfdt.

OK great, will take a look. Thanks!

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>
> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>
> > Hi Tom,
> >
> > This is mostly syncing up with upstream. I have a few more things to do
> > also (some small, some large).
> >
> >
> > The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
> >
> >   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
> > 09:33:37 -0400)
> >
> > are available in the git repository at:
> >
> >   git://git.denx.de/u-boot-fdt.git
> >
> > for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
> >
> >   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
> >
>
> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
> a rebase and bisect of just this series later to pinpoint which one is
> at fault (I'm testing all of the other stuff that piled up while my
> power was out atm).  Thanks!

I'm not sure how this fault could affect your platform, since
Keerthy's fix applies to a driver that is not yet upstream (it's in
the dm pull request).

Could there be another fault lurking?

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Thu, Oct 13, 2016 at 08:24:22AM -0600, Simon Glass wrote:
> Hi Tom,
> 
> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
> >
> > On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
> >
> > > Hi Tom,
> > >
> > > This is mostly syncing up with upstream. I have a few more things to do
> > > also (some small, some large).
> > >
> > >
> > > The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
> > >
> > >   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
> > > 09:33:37 -0400)
> > >
> > > are available in the git repository at:
> > >
> > >   git://git.denx.de/u-boot-fdt.git
> > >
> > > for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
> > >
> > >   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
> > >
> >
> > Something in here is breaking my TI J6 Eco platform.  I'll try and kick
> > a rebase and bisect of just this series later to pinpoint which one is
> > at fault (I'm testing all of the other stuff that piled up while my
> > power was out atm).  Thanks!
> 
> I'm not sure how this fault could affect your platform, since
> Keerthy's fix applies to a driver that is not yet upstream (it's in
> the dm pull request).
> 
> Could there be another fault lurking?

No, it makes sense.  The -dm pull adds the new driver used on J6Eco and
-fdt changes the call semantics used in that new driver.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161013/56f376b1/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

On 13 October 2016 at 08:33, Tom Rini <trini@konsulko.com> wrote:
> On Thu, Oct 13, 2016 at 08:24:22AM -0600, Simon Glass wrote:
>> Hi Tom,
>>
>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>> >
>> > On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>> >
>> > > Hi Tom,
>> > >
>> > > This is mostly syncing up with upstream. I have a few more things to do
>> > > also (some small, some large).
>> > >
>> > >
>> > > The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>> > >
>> > >   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>> > > 09:33:37 -0400)
>> > >
>> > > are available in the git repository at:
>> > >
>> > >   git://git.denx.de/u-boot-fdt.git
>> > >
>> > > for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
>> > >
>> > >   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
>> > >
>> >
>> > Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>> > a rebase and bisect of just this series later to pinpoint which one is
>> > at fault (I'm testing all of the other stuff that piled up while my
>> > power was out atm).  Thanks!
>>
>> I'm not sure how this fault could affect your platform, since
>> Keerthy's fix applies to a driver that is not yet upstream (it's in
>> the dm pull request).
>>
>> Could there be another fault lurking?
>
> No, it makes sense.  The -dm pull adds the new driver used on J6Eco and
> -fdt changes the call semantics used in that new driver.

OK that's good. I'll sort this out once things land in mainline.

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Keerthy]

Simon,

On Thursday 13 October 2016 07:54 PM, Simon Glass wrote:
> Hi Tom,
>
> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>
>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>
>>> Hi Tom,
>>>
>>> This is mostly syncing up with upstream. I have a few more things to do
>>> also (some small, some large).
>>>
>>>
>>> The following changes since commit f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>
>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>> 09:33:37 -0400)
>>>
>>> are available in the git repository at:
>>>
>>>   git://git.denx.de/u-boot-fdt.git
>>>
>>> for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>
>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
>>>
>>
>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>> a rebase and bisect of just this series later to pinpoint which one is
>> at fault (I'm testing all of the other stuff that piled up while my
>> power was out atm).  Thanks!
>
> I'm not sure how this fault could affect your platform, since
> Keerthy's fix applies to a driver that is not yet upstream (it's in
> the dm pull request).
>
> Could there be another fault lurking?

I tried u-boot master + dm branch. That is fine.
I tried u-boot master + fdt branch. That is fine.

Then i tried u-boot master + fdt branch + dm branch. That is when i saw 
the hang on DRA72.

Boot is fine. I am not sure if Tom saw any other issue.

Regards,
Keerthy
>
> Regards,
> Simon
>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Keerthy,

On 13 October 2016 at 08:59, Keerthy <a0393675@ti.com> wrote:
> Simon,
>
> On Thursday 13 October 2016 07:54 PM, Simon Glass wrote:
>>
>> Hi Tom,
>>
>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>>
>>>
>>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>>
>>>> Hi Tom,
>>>>
>>>> This is mostly syncing up with upstream. I have a few more things to do
>>>> also (some small, some large).
>>>>
>>>>
>>>> The following changes since commit
>>>> f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>>
>>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>>> 09:33:37 -0400)
>>>>
>>>> are available in the git repository at:
>>>>
>>>>   git://git.denx.de/u-boot-fdt.git
>>>>
>>>> for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>>
>>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
>>>>
>>>
>>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>>> a rebase and bisect of just this series later to pinpoint which one is
>>> at fault (I'm testing all of the other stuff that piled up while my
>>> power was out atm).  Thanks!
>>
>>
>> I'm not sure how this fault could affect your platform, since
>> Keerthy's fix applies to a driver that is not yet upstream (it's in
>> the dm pull request).
>>
>> Could there be another fault lurking?
>
>
> I tried u-boot master + dm branch. That is fine.
> I tried u-boot master + fdt branch. That is fine.
>
> Then i tried u-boot master + fdt branch + dm branch. That is when i saw the
> hang on DRA72.
>
> Boot is fine. I am not sure if Tom saw any other issue.

Sounds good, thanks.

BTW what's up with your hex email address?

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Keerthy]

On Thursday 13 October 2016 08:38 PM, Simon Glass wrote:
> Hi Keerthy,
>
> On 13 October 2016 at 08:59, Keerthy <a0393675@ti.com> wrote:
>> Simon,
>>
>> On Thursday 13 October 2016 07:54 PM, Simon Glass wrote:
>>>
>>> Hi Tom,
>>>
>>> On 12 October 2016 at 08:13, Tom Rini <trini@konsulko.com> wrote:
>>>>
>>>>
>>>> On Tue, Oct 11, 2016 at 02:29:01PM -0600, Simon Glass wrote:
>>>>
>>>>> Hi Tom,
>>>>>
>>>>> This is mostly syncing up with upstream. I have a few more things to do
>>>>> also (some small, some large).
>>>>>
>>>>>
>>>>> The following changes since commit
>>>>> f5fd45ff64e28a73499548358e3d1ceda0de7daf:
>>>>>
>>>>>   Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-10-08
>>>>> 09:33:37 -0400)
>>>>>
>>>>> are available in the git repository at:
>>>>>
>>>>>   git://git.denx.de/u-boot-fdt.git
>>>>>
>>>>> for you to fetch changes up to 7f899e436fe1e952950a14df92600d68d55dea5c:
>>>>>
>>>>>   libfdt: Drop inlining of fdt_path_offset() (2016-10-11 14:26:46 -0600)
>>>>>
>>>>
>>>> Something in here is breaking my TI J6 Eco platform.  I'll try and kick
>>>> a rebase and bisect of just this series later to pinpoint which one is
>>>> at fault (I'm testing all of the other stuff that piled up while my
>>>> power was out atm).  Thanks!
>>>
>>>
>>> I'm not sure how this fault could affect your platform, since
>>> Keerthy's fix applies to a driver that is not yet upstream (it's in
>>> the dm pull request).
>>>
>>> Could there be another fault lurking?
>>
>>
>> I tried u-boot master + dm branch. That is fine.
>> I tried u-boot master + fdt branch. That is fine.
>>
>> Then i tried u-boot master + fdt branch + dm branch. That is when i saw the
>> hang on DRA72.
>>
>> Boot is fine. I am not sure if Tom saw any other issue.
>
> Sounds good, thanks.
>
> BTW what's up with your hex email address?

Oh wow! I am seeing it as j-keerthy at ti.com. Let me check what is going 
with my mailer. Thanks for catching it.

>
> Regards,
> Simon
>

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Tue, Nov 05, 2019 at 05:23:51AM -0700, Simon Glass wrote:

> Hi Tom,
> 
> Passing run here:
> 
> https://gitlab.denx.de/u-boot/custodians/u-boot-dm/pipelines/1210
> 
> 
> The following changes since commit 73b6e6ad254b36763419cdd3fdf406c0094517b7:
> 
>   Merge tag 'u-boot-imx-20191104' of
> https://gitlab.denx.de/u-boot/custodians/u-boot-imx (2019-11-04
> 12:57:41 -0500)
> 
> are available in the Git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git tags/fdt-pull-5nov19
> 
> for you to fetch changes up to 388560134b99dc4cc752627d3a7e9f8c8c2a89a7:
> 
>   binman: Move to use Python 3 (2019-11-04 18:15:32 -0700)
> 

Now first,
Applied to u-boot/master, thanks!

And second, which is why I've included the board maintainers list and
custodian lists, this causes a bit of size growth everywhere just about
(tbs2910 being the exception) because by default upstream now has
various input validation routines.  It doesn't catch "tell the hardware
to overvolt something" but does catch "pass garbage in the property so
we can overwrite the stack and ..." type problems.  And it's
configurable.  If you turn off all of the validation stuff, which we do
in SPL/TPL by default (size concerns!), in the main U-Boot we go from a
size growth to a size shrink.  An arbitrary PowerPC board I picked to
confirm this on grows by 985 bytes now, but if I turned everything off
it would shrink by 1100 bytes.  There's an inbetween setting that would
probably result in neutral size change.

The default is all of the input validation we can do because I believe
it's important to validate inputs when we can validate them.  I also
firmly believe board maintainers know their requirements best and can
provide a different value for their board(s).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191105/c6a6dc99/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Passing run here:

https://gitlab.denx.de/u-boot/custodians/u-boot-dm/pipelines/1210


The following changes since commit 73b6e6ad254b36763419cdd3fdf406c0094517b7:

  Merge tag 'u-boot-imx-20191104' of
https://gitlab.denx.de/u-boot/custodians/u-boot-imx (2019-11-04
12:57:41 -0500)

are available in the Git repository at:

  git://git.denx.de/u-boot-fdt.git tags/fdt-pull-5nov19

for you to fetch changes up to 388560134b99dc4cc752627d3a7e9f8c8c2a89a7:

  binman: Move to use Python 3 (2019-11-04 18:15:32 -0700)

----------------------------------------------------------------
Update to latest libfdt and pylibfdt, with added size control
Update binman, dtoc, patman, buildman to Python 3
Update move_config, rkmux, microcode_tool to Python 3

----------------------------------------------------------------
Simon Glass (20):
      fdt: Add INT32_MAX to kernel.h for libfdt
      fdt: Add Kconfig options to control code size
      mx6: tbs2910: Minimise libfdt code size
      fdt: Sync up to the latest libfdt
      patman: Adjust 'command' to return strings instead of bytes
      patman: Use unicode for file I/O
      patman: Move to use Python 3
      buildman: Convert to Python 3
      test_fdt: Move to use Python 3
      test_dtoc: Move to use Python 3
      microcode_tool: Convert to Python 3
      move_config: Convert to Python 3
      rkmux: Convert to Python 3
      pylibfdt: Convert to Python 3
      pylibfdt: Sync up with upstream
      pylibfdt: Correct the type for fdt_property_stub()
      binman: Remember the pre-reset entry size
      binman: Convert a few tests to Python 3
      dtoc: Convert fdt.py to Python 3
      binman: Move to use Python 3

 configs/tbs2910_defconfig             |   1 +
 include/linux/kernel.h                |   2 +
 include/linux/libfdt_env.h            |   1 +
 lib/Kconfig                           |  33 +++
 lib/libfdt/Makefile                   |   3 +-
 lib/libfdt/fdt_ro.c                   | 420 +++++++++++++++++++++++++---------
 scripts/dtc/libfdt/Makefile.libfdt    |   7 +
 scripts/dtc/libfdt/fdt.c              | 182 ++++++++++-----
 scripts/dtc/libfdt/fdt.h              |  47 +---
 scripts/dtc/libfdt/fdt_addresses.c    |  94 ++++----
 scripts/dtc/libfdt/fdt_empty_tree.c   |  47 +---
 scripts/dtc/libfdt/fdt_overlay.c      |  91 +++-----
 scripts/dtc/libfdt/fdt_ro.c           | 341 ++++++++++++++++++---------
 scripts/dtc/libfdt/fdt_rw.c           | 119 +++++-----
 scripts/dtc/libfdt/fdt_strerror.c     |  47 +---
 scripts/dtc/libfdt/fdt_sw.c           | 241 ++++++++++++-------
 scripts/dtc/libfdt/fdt_wip.c          |  47 +---
 scripts/dtc/libfdt/libfdt.h           | 268 +++++++++++++++++-----
 scripts/dtc/libfdt/libfdt_env.h       |  48 +---
 scripts/dtc/libfdt/libfdt_internal.h  | 144 +++++++-----
 scripts/dtc/pylibfdt/Makefile         |   2 +-
 scripts/dtc/pylibfdt/libfdt.i_shipped |  51 +++--
 scripts/dtc/pylibfdt/setup.py         |   2 +-
 tools/binman/binman.py                |   2 +-
 tools/binman/cbfs_util_test.py        |   2 +-
 tools/binman/entry.py                 |  25 +-
 tools/binman/entry_test.py            |  15 --
 tools/binman/etype/intel_fit.py       |   2 +-
 tools/binman/ftest.py                 |  16 +-
 tools/buildman/board.py               |   9 +-
 tools/buildman/bsettings.py           |  20 +-
 tools/buildman/builder.py             |  47 ++--
 tools/buildman/builderthread.py       |  24 +-
 tools/buildman/buildman.py            |  10 +-
 tools/buildman/control.py             |  44 ++--
 tools/buildman/func_test.py           |  16 +-
 tools/buildman/test.py                |  22 +-
 tools/buildman/toolchain.py           |  99 ++++----
 tools/dtoc/dtoc.py                    |   2 +-
 tools/dtoc/fdt.py                     |  17 +-
 tools/dtoc/test_dtoc.py               |   1 +
 tools/dtoc/test_fdt.py                |   2 +-
 tools/libfdt/fdt_rw.c                 |   3 +-
 tools/microcode-tool.py               |  28 +--
 tools/moveconfig.py                   |  82 +++----
 tools/patman/command.py               |  31 ++-
 tools/patman/func_test.py             |   8 +-
 tools/patman/patchstream.py           |   4 +-
 tools/patman/patman.py                |   2 +-
 tools/patman/series.py                |   2 +-
 tools/patman/settings.py              |   4 +-
 tools/patman/test.py                  |   4 +-
 tools/patman/tools.py                 |  29 ++-
 tools/rkmux.py                        |  16 +-
 54 files changed, 1645 insertions(+), 1181 deletions(-)
 mode change 100644 => 100755 tools/dtoc/test_dtoc.py

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Fri, Sep 15, 2017 at 01:31:29PM -0600, Simon Glass wrote:

> Hi Tom,
> 
> Here are the overlay and dtoc series.
> 
> 
> The following changes since commit 5541543f686b43210fb92181003ff7175d4ab036:
> 
>   configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment
> (2017-09-14 16:02:48 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to ea28e488f743520f7f83b341f28818c32dae1ee3:
> 
>   test: overlay: Add unit test for stacked overlay (2017-09-15 05:27:49 -0600)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170916/dc3afc58/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Here are the overlay and dtoc series.


The following changes since commit 5541543f686b43210fb92181003ff7175d4ab036:

  configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment
(2017-09-14 16:02:48 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to ea28e488f743520f7f83b341f28818c32dae1ee3:

  test: overlay: Add unit test for stacked overlay (2017-09-15 05:27:49 -0600)

----------------------------------------------------------------
Franklin S Cooper Jr (1):
      doc: overlays: Tweak documentation regarding overlay

Pantelis Antoniou (12):
      fdt: Introduce helper method fdt_overlay_apply_verbose()
      fdt: Switch to using the verbose overlay application method
      fdt: Allow stacked overlays phandle references
      fit: Allow multiple images per property
      fit: Do not throw away extra configuration on fit_image_load()
      fit: Introduce methods for applying overlays on fit-load
      fit: fdt overlays doc
      doc: Document how to apply fdt overlays
      dtbo: make dtbos special
      config: sandbox: Add unit tests
      ut: fix fdt_getprop_u32() change
      test: overlay: Add unit test for stacked overlay

Simon Glass (16):
      fdt: Sync libfdt up to upstream
      dtoc: Adjust Node to record its parent
      dtoc: Add a 64-bit type and a way to convert cells into 64 bits
      dtoc: Avoid very long lines in output
      dtoc: Add support for 32 or 64-bit addresses
      dtoc: Handle 'reg' properties with unusual sizes
      dtoc: Update the Fdt class to record phandles
      dtoc: Use the Fdt's class's phandle map
      dtoc: Make is_phandle() a member function
      dtoc: Rename is_phandle() and adjust it to return more detail
      dtoc: Rename the phandle struct
      dtoc: Put each phandle on a separate line
      dtoc: Put phandle args in an array
      dtoc: Support properties containing multiple phandle values
      dtoc: Rename the auto-generated dt-structs.h file
      dtoc: Add a header to the generated files

Tien Fong Chee (1):
      libfdt: Initialize the stack variable

Tom Rini (1):
      Travis-CI: Switch back to using the top of tree dtc

 .travis.yml                                  |   5 +-
 cmd/fdt.c                                    |   7 +-
 common/fdt_support.c                         |  31 +++
 common/image-fdt.c                           |   7 +-
 common/image-fit.c                           | 210 +++++++++++++++++++--
 configs/sandbox_defconfig                    |   2 +
 doc/README.fdt-overlays                      | 114 +++++++++++
 doc/driver-model/of-plat.txt                 |   2 +-
 doc/uImage.FIT/command_syntax_extensions.txt |  12 +-
 doc/uImage.FIT/overlay-fdt-boot.txt          | 225 ++++++++++++++++++++++
 doc/uImage.FIT/source_file_format.txt        |   6 +-
 drivers/clk/clk-uclass.c                     |   4 +-
 drivers/clk/rockchip/clk_rk3368.c            |   2 +-
 drivers/clk/rockchip/clk_rk3399.c            |   4 +-
 drivers/core/regmap.c                        |   2 +-
 include/clk.h                                |   4 +-
 include/dt-structs.h                         |  16 +-
 include/fdt_support.h                        |   2 +
 include/fdtdec.h                             |   2 +
 include/image.h                              |  25 +++
 include/regmap.h                             |   2 +-
 include/syscon.h                             |   6 +-
 lib/libfdt/fdt_overlay.c                     | 228 +++++++++++++++++++---
 lib/libfdt/fdt_rw.c                          |  20 +-
 lib/libfdt/fdt_wip.c                         |   2 +-
 lib/libfdt/libfdt.h                          |  31 +++
 lib/libfdt/pylibfdt/libfdt.i                 |  58 ++++++
 scripts/Makefile.lib                         |  17 ++
 scripts/Makefile.spl                         |   5 +-
 test/overlay/Makefile                        |   1 +
 test/overlay/cmd_ut_overlay.c                |  50 ++++-
 test/overlay/test-fdt-overlay-stacked.dts    |  21 +++
 tools/dtoc/dtb_platdata.py                   | 204 +++++++++++++++-----
 tools/dtoc/dtoc_test_addr32.dts              |  27 +++
 tools/dtoc/dtoc_test_addr32_64.dts           |  33 ++++
 tools/dtoc/dtoc_test_addr64.dts              |  33 ++++
 tools/dtoc/dtoc_test_addr64_32.dts           |  33 ++++
 tools/dtoc/dtoc_test_phandle.dts             |  16 +-
 tools/dtoc/dtoc_test_simple.dts              |  14 ++
 tools/dtoc/fdt.py                            |  19 +-
 tools/dtoc/fdt_util.py                       |  16 ++
 tools/dtoc/test_dtoc.py                      | 270 ++++++++++++++++++++++++++-
 42 files changed, 1656 insertions(+), 132 deletions(-)
 create mode 100644 doc/README.fdt-overlays
 create mode 100644 doc/uImage.FIT/overlay-fdt-boot.txt
 create mode 100644 test/overlay/test-fdt-overlay-stacked.dts
 create mode 100644 tools/dtoc/dtoc_test_addr32.dts
 create mode 100644 tools/dtoc/dtoc_test_addr32_64.dts
 create mode 100644 tools/dtoc/dtoc_test_addr64.dts
 create mode 100644 tools/dtoc/dtoc_test_addr64_32.dts

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

On 9 May 2017 at 17:59, Tom Rini <trini@konsulko.com> wrote:
>
> On Tue, May 09, 2017 at 04:53:36PM -0600, Simon Glass wrote:
>
> > Hi Tom,
> >
> > Here's the conversion to use the upstream pylibfdt implementation.
> >
> >
> > The following changes since commit 85ea850976daea57c8045f3569566fad5ce9fe0f:
> >
> >   p1_p2_rdb: Fix unused variable warning (2017-05-09 09:11:04 -0400)
> >
> > are available in the git repository at:
> >
> >   git://git.denx.de/u-boot-fdt.git
> >
> > for you to fetch changes up to 8fbd55f0f8730e3a6994798f4e533138d15be6aa:
> >
> >   fdt: Drop fdt_select.py (2017-05-09 14:56:19 -0600)
> >
>
> NAK.  I get:
> $ ./test/py/test.py --bd sandbox --build
> make O=/home/trini/work/u-boot/u-boot/build-sandbox -s sandbox_defconfig
> make O=/home/trini/work/u-boot/u-boot/build-sandbox -s -j8
> Assembler messages:
> Fatal error: can't create
> build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o: No such file or
> directory
> error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
> make[2]: *** [tools/_libfdt.so] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [tools] Error 2
> make: *** [sub-make] Error 2
> Exit code: 2

This is due to some weirdness with setup.py not allowing source files
to come from a patch starting with "..". I'll send an updated patch,
pull it in and then resend the pull request.

>
> --
> Tom

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

On 9 May 2017 at 17:59, Tom Rini <trini@konsulko.com> wrote:
> On Tue, May 09, 2017 at 04:53:36PM -0600, Simon Glass wrote:
>
>> Hi Tom,
>>
>> Here's the conversion to use the upstream pylibfdt implementation.
>>
>>
>> The following changes since commit 85ea850976daea57c8045f3569566fad5ce9fe0f:
>>
>>   p1_p2_rdb: Fix unused variable warning (2017-05-09 09:11:04 -0400)
>>
>> are available in the git repository at:
>>
>>   git://git.denx.de/u-boot-fdt.git
>>
>> for you to fetch changes up to 8fbd55f0f8730e3a6994798f4e533138d15be6aa:
>>
>>   fdt: Drop fdt_select.py (2017-05-09 14:56:19 -0600)
>>
>
> NAK.  I get:
> $ ./test/py/test.py --bd sandbox --build
> make O=/home/trini/work/u-boot/u-boot/build-sandbox -s sandbox_defconfig
> make O=/home/trini/work/u-boot/u-boot/build-sandbox -s -j8
> Assembler messages:
> Fatal error: can't create
> build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o: No such file or
> directory
> error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
> make[2]: *** [tools/_libfdt.so] Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [tools] Error 2
> make: *** [sub-make] Error 2
> Exit code: 2

I did see that once on a buildman run some weeks ago and could not
repeat it after various tries. I'll try harder.

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Tue, May 09, 2017 at 04:53:36PM -0600, Simon Glass wrote:

> Hi Tom,
> 
> Here's the conversion to use the upstream pylibfdt implementation.
> 
> 
> The following changes since commit 85ea850976daea57c8045f3569566fad5ce9fe0f:
> 
>   p1_p2_rdb: Fix unused variable warning (2017-05-09 09:11:04 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 8fbd55f0f8730e3a6994798f4e533138d15be6aa:
> 
>   fdt: Drop fdt_select.py (2017-05-09 14:56:19 -0600)
> 

NAK.  I get:
$ ./test/py/test.py --bd sandbox --build
make O=/home/trini/work/u-boot/u-boot/build-sandbox -s sandbox_defconfig
make O=/home/trini/work/u-boot/u-boot/build-sandbox -s -j8
Assembler messages:
Fatal error: can't create
build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o: No such file or
directory
error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
make[2]: *** [tools/_libfdt.so] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [tools] Error 2
make: *** [sub-make] Error 2
Exit code: 2

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170509/efd733e0/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Here's the conversion to use the upstream pylibfdt implementation.


The following changes since commit 85ea850976daea57c8045f3569566fad5ce9fe0f:

  p1_p2_rdb: Fix unused variable warning (2017-05-09 09:11:04 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 8fbd55f0f8730e3a6994798f4e533138d15be6aa:

  fdt: Drop fdt_select.py (2017-05-09 14:56:19 -0600)

----------------------------------------------------------------
Simon Glass (20):
      fdt: Add Python bindings
      pci: Correct cast for sandbox
      fdt: Correct cast for sandbox in fdtdec_setup_memory_size()
      fdt: Use SPDX format for licenses in the libfdt headers
      fdt: Move header files into lib/libfdt
      fdt: Allow swig options to be provided by Makefile
      fdt: Add all source files to the libfdt build
      fdt: Rename existing python libfdt module
      fdt: Build the new python libfdt module
      fdt: Update fdt_test to use 'dt' instead of 'fdt'
      fdt: dtoc: Add a full set of property tests
      fdt: Support use of the new python libfdt library
      fdt: Makefile: Build python libfdt library if needed
      fdt: Stop building the old python libfdt module
      fdt: Drop use of the legacy libfdt python module
      fdt: Drop fdt_fallback library
      binman: Drop a special case related to fdt_fallback
      fdt: Merge fdt_normal with its base class
      binman: Rename fdt variable to dtb
      fdt: Drop fdt_select.py

 Makefile                                    |   16 +-
 cmd/pci.c                                   |    3 +-
 include/fdt.h                               |  112 +---
 include/libfdt.h                            | 2138
+---------------------------------------------------------------------
 lib/fdtdec.c                                |    3 +-
 lib/libfdt/fdt.h                            |   67 +++
 lib/libfdt/libfdt.h                         | 2144
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/libfdt/libfdt.swig                      |  113 ----
 lib/libfdt/pylibfdt/libfdt.i                |  389 +++++++++++++
 lib/libfdt/pylibfdt/setup.py                |  123 +++++
 lib/libfdt/setup.py                         |   38 --
 scripts/Makefile.spl                        |   17 +-
 tools/Makefile                              |   43 +-
 tools/binman/binman.py                      |    3 +
 tools/binman/control.py                     |   12 +-
 tools/binman/etype/u_boot_dtb_with_ucode.py |   24 +-
 tools/binman/fdt_test.py                    |   64 ++-
 tools/binman/func_test.py                   |   48 +-
 tools/binman/test/45_prop_test.dts          |   23 +
 tools/dtoc/dtoc.py                          |    3 +-
 tools/dtoc/fdt.py                           |  183 +++++-
 tools/dtoc/fdt_fallback.py                  |  181 ------
 tools/dtoc/fdt_normal.py                    |  225 --------
 tools/dtoc/fdt_select.py                    |   36 --
 24 files changed, 3049 insertions(+), 2959 deletions(-)
 create mode 100644 lib/libfdt/fdt.h
 create mode 100644 lib/libfdt/libfdt.h
 delete mode 100644 lib/libfdt/libfdt.swig
 create mode 100644 lib/libfdt/pylibfdt/libfdt.i
 create mode 100755 lib/libfdt/pylibfdt/setup.py
 delete mode 100644 lib/libfdt/setup.py
 create mode 100644 tools/binman/test/45_prop_test.dts
 delete mode 100644 tools/dtoc/fdt_fallback.py
 delete mode 100644 tools/dtoc/fdt_normal.py
 delete mode 100644 tools/dtoc/fdt_select.py

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Mon, Apr 10, 2017 at 02:52:44PM -0600, Simon Glass wrote:

> Hi Tom,
> 
> Just a few minor fixes.
> 
> 
> The following changes since commit 01cce5fdd098add2b8aa570468cb35fca5d778fe:
> 
>   Merge git://git.denx.de/u-boot-x86 (2017-04-10 08:07:29 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 9963890b8be1d208035945abc5ba9f77637b6542:
> 
>   libfdt: fix build with Python 3 (2017-04-10 13:25:19 -0600)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170411/f080a4f3/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Just a few minor fixes.


The following changes since commit 01cce5fdd098add2b8aa570468cb35fca5d778fe:

  Merge git://git.denx.de/u-boot-x86 (2017-04-10 08:07:29 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 9963890b8be1d208035945abc5ba9f77637b6542:

  libfdt: fix build with Python 3 (2017-04-10 13:25:19 -0600)

----------------------------------------------------------------
Simon Glass (1):
      fdt: Bring in changes from v1.4.4

Stefan Agner (1):
      libfdt: fix build with Python 3

 lib/libfdt/fdt_overlay.c  | 23 ++++++++++++-----------
 lib/libfdt/fdt_rw.c       |  3 ++-
 lib/libfdt/fdt_strerror.c |  3 +++
 lib/libfdt/setup.py       |  2 +-
 4 files changed, 18 insertions(+), 13 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Sat, Jan 14, 2017 at 10:14:44AM -0700, Simon Glass wrote:

> Hi Tom,
> 
> Just a few fixes.
> 
> The following changes since commit 70c1e0474a9df2c4493b4e2330cc41d3132b4e90:
> 
>   Merge git://git.denx.de/u-boot-rockchip (2017-01-12 21:20:51 -0500)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to b05bf6c75d03c925737e228472b694cbeaa503c2:
> 
>   cmd/fdt: Make fdt get value endian-safe for single-cell properties
> (2017-01-14 10:09:46 -0700)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170114/be0265e7/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Just a few fixes.

The following changes since commit 70c1e0474a9df2c4493b4e2330cc41d3132b4e90:

  Merge git://git.denx.de/u-boot-rockchip (2017-01-12 21:20:51 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to b05bf6c75d03c925737e228472b694cbeaa503c2:

  cmd/fdt: Make fdt get value endian-safe for single-cell properties
(2017-01-14 10:09:46 -0700)

----------------------------------------------------------------
Andreas F?rber (1):
      cmd/fdt: Make fdt get value endian-safe for single-cell properties

David Gibson (1):
      libfdt: Correct fdt handling of overlays without fixups and base
trees without symbols

Stefan Agner (1):
      cmd: fdt: Print error message when fdt application fails

 cmd/fdt.c                | 10 +++++++---
 lib/libfdt/fdt_overlay.c |  7 ++++++-
 2 files changed, 13 insertions(+), 4 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Fri, Nov 25, 2016 at 09:51:02AM -0700, Simon Glass wrote:

> Hi Tom.
> 
> The following changes since commit 543bd27353d2c5679057fe09aa2d02259687ff32:
> 
>   MAINTAINERS: SUNXI: Update maintainership (2016-11-22 09:07:26 -0500)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 643f8d4c07788f28ad283e3fcb29d88a4b16a4be:
> 
>   MAINTAINERS: Fix syntax and update filename for FDT (2016-11-25
> 09:48:09 -0700)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161126/1ab5dd73/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

+Tom

On 25 November 2016 at 09:51, Simon Glass <sjg@chromium.org> wrote:
> Hi Tom.
>
> The following changes since commit 543bd27353d2c5679057fe09aa2d02259687ff32:
>
>   MAINTAINERS: SUNXI: Update maintainership (2016-11-22 09:07:26 -0500)
>
> are available in the git repository at:
>
>   git://git.denx.de/u-boot-fdt.git
>
> for you to fetch changes up to 643f8d4c07788f28ad283e3fcb29d88a4b16a4be:
>
>   MAINTAINERS: Fix syntax and update filename for FDT (2016-11-25
> 09:48:09 -0700)
>
> ----------------------------------------------------------------
> Andreas F?rber (1):
>       MAINTAINERS: Fix syntax and update filename for FDT
>
>  MAINTAINERS | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> Regards,
> Simon

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom.

The following changes since commit 543bd27353d2c5679057fe09aa2d02259687ff32:

  MAINTAINERS: SUNXI: Update maintainership (2016-11-22 09:07:26 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 643f8d4c07788f28ad283e3fcb29d88a4b16a4be:

  MAINTAINERS: Fix syntax and update filename for FDT (2016-11-25
09:48:09 -0700)

----------------------------------------------------------------
Andreas F?rber (1):
      MAINTAINERS: Fix syntax and update filename for FDT

 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Sun, Oct 23, 2016 at 09:01:17PM -0600, Simon Glass wrote:

> Hi Tom,
> 
> Here's another patch syncing up with libfdt upstream. Maxime suggest
> that this should go in now.
> 
> 
> The following changes since commit 3431b392ad50ff37fa3d6e7715c6a99c74d692dc:
> 
>   Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
> (2016-10-19 07:48:16 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 610db7058f1d9ed668aef7692f8f90f05e0923f8:
> 
>   libfdt: Sync overlay with upstream (2016-10-23 12:08:48 -0700)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161024/5e9a17ee/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Here's another patch syncing up with libfdt upstream. Maxime suggest
that this should go in now.


The following changes since commit 3431b392ad50ff37fa3d6e7715c6a99c74d692dc:

  Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
(2016-10-19 07:48:16 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 610db7058f1d9ed668aef7692f8f90f05e0923f8:

  libfdt: Sync overlay with upstream (2016-10-23 12:08:48 -0700)

----------------------------------------------------------------
Maxime Ripard (1):
      libfdt: Sync overlay with upstream

 include/libfdt.h          |  24 ++++++---
 lib/libfdt/fdt_overlay.c  | 199
+++++++++++++++++++++++++++++++++++++++++++-------------------------
 lib/libfdt/fdt_strerror.c |   3 ++
 3 files changed, 147 insertions(+), 79 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Fri, Jan 22, 2016 at 02:42:47PM -0700, Simon Glass wrote:

> Hi Tom,
> 
> I've been sitting on this but I don't see much else so we may as well it get in.
> 
> 
> The following changes since commit 6905f4d3c7be46fed4859f51f0a8f9a1107c22e7:
> 
>   Merge git://git.denx.de/u-boot-dm (2016-01-21 11:49:49 -0500)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 67871a595873930a0a536b1685e5caac53766701:
> 
>   devicetree: use wildcard to clean arch subdir (2016-01-22 14:41:14 -0700)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160122/6e3e46f9/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

I've been sitting on this but I don't see much else so we may as well it get in.


The following changes since commit 6905f4d3c7be46fed4859f51f0a8f9a1107c22e7:

  Merge git://git.denx.de/u-boot-dm (2016-01-21 11:49:49 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 67871a595873930a0a536b1685e5caac53766701:

  devicetree: use wildcard to clean arch subdir (2016-01-22 14:41:14 -0700)

----------------------------------------------------------------
Thomas Chou (1):
      devicetree: use wildcard to clean arch subdir

 dts/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Sat, Oct 03, 2015 at 03:45:21PM +0100, Simon Glass wrote:

> Hi Tom,
> 
> Here are a few last-minute bug fixes mostly stemming from the
> fdtdec_get_addr() change earlier.
> 
> 
> The following changes since commit fbb0c7bd92255bfcb13826a8ac81be6e2f94ba48:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-tegra (2015-10-02
> 20:35:49 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to cce573e8d806fd430e7584b36bce6d62ae0430e8:
> 
>   trats: fdt: disable unused DW MMC (2015-10-03 14:39:19 +0100)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151003/1f6f345d/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

Here are a few last-minute bug fixes mostly stemming from the
fdtdec_get_addr() change earlier.


The following changes since commit fbb0c7bd92255bfcb13826a8ac81be6e2f94ba48:

  Merge branch 'master' of git://git.denx.de/u-boot-tegra (2015-10-02
20:35:49 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to cce573e8d806fd430e7584b36bce6d62ae0430e8:

  trats: fdt: disable unused DW MMC (2015-10-03 14:39:19 +0100)

----------------------------------------------------------------
Przemyslaw Marczak (4):
      fdtdec: fix parsing 'reg' property with zero value in '#size-cells'
      gpio: s5p: call: dev_get_addr() instead of fdtdec_get_addr()
      mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()
      trats: fdt: disable unused DW MMC

Simon Glass (1):
      dts: Add a comment about CONFIG_OF_EMBED being for local use

Stephen Warren (1):
      fdt: fix fdtdec_get_addr_size not to require any size cells

 arch/arm/dts/exynos4210-trats.dts |  4 ++++
 arch/arm/mach-exynos/clock.c      | 10 ++++------
 drivers/gpio/s5p_gpio.c           | 18 +++++++++++-------
 dts/Kconfig                       |  4 +++-
 lib/fdtdec.c                      |  7 ++++---
 5 files changed, 26 insertions(+), 17 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

The following changes since commit 1f8836396de8215b7f460616926052b32597bb29:

  Prepare v2015.10-rc4 (2015-09-28 16:57:42 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 8809141907528550750420e14c24fa66e089b3f8:

  dts: Add a comment about CONFIG_OF_EMBED being for local use
(2015-09-28 22:30:31 -0600)

----------------------------------------------------------------
Simon Glass (1):
      dts: Add a comment about CONFIG_OF_EMBED being for local use

 dts/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Mon, Jul 20, 2015 at 08:04:26AM -0600, Simon Glass wrote:

> Hi Tom,
> 
> A few things in my queue. I would like to do a sync with upstream
> libfdt too but have not got to that yet.
> 
> 
> The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846:
> 
>   Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 73e1e7952a2a629dc071d894594df4852acc11ad:
> 
>   libfdt: fix error code of fdt_count_strings() (2015-07-20 07:21:47 -0600)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150721/df8efac3/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

A few things in my queue. I would like to do a sync with upstream
libfdt too but have not got to that yet.


The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846:

  Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 73e1e7952a2a629dc071d894594df4852acc11ad:

  libfdt: fix error code of fdt_count_strings() (2015-07-20 07:21:47 -0600)

----------------------------------------------------------------
Andre Przywara (1):
      fdt: prevent clearing memory node if there are no banks

Haikun Wang (1):
      fdt: armv8: Fix build warnings on armv8

Masahiro Yamada (3):
      libfdt: fix description of fdt_get_string()
      libfdt: fix error code of fdt_get_string_index()
      libfdt: fix error code of fdt_count_strings()

Sudeep Holla (1):
      cmd_fdt: save fdtaddr in hex format

 common/cmd_fdt.c       |  2 +-
 common/fdt_support.c   |  3 +++
 drivers/spi/fsl_dspi.c |  4 ++--
 include/fdt_support.h  | 26 ++++++++++++++++++++++++++
 include/libfdt.h       |  2 +-
 lib/fdtdec.c           |  4 ++--
 lib/libfdt/fdt_ro.c    |  4 ++--
 7 files changed, 37 insertions(+), 8 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Fri, Jun 05, 2015 at 10:08:53AM -0600, Simon Glass wrote:

> Hi Tom,
> 
> A few things I found in patchwork.
> 
> 
> The following changes since commit d8abb46b37fadff0349adb376df6d3ecd09ee7d1:
> 
>   board/BuR/common: fix netconsole (2015-06-02 12:58:51 -0400)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 3c4c142e5deed2a9362e65e45372044652ac57b5:
> 
>   fdt: Documentation for a few support functions aside their
> prototypes (2015-06-05 08:32:58 -0600)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150606/1bb9de68/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

A few things I found in patchwork.


The following changes since commit d8abb46b37fadff0349adb376df6d3ecd09ee7d1:

  board/BuR/common: fix netconsole (2015-06-02 12:58:51 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 3c4c142e5deed2a9362e65e45372044652ac57b5:

  fdt: Documentation for a few support functions aside their
prototypes (2015-06-05 08:32:58 -0600)

----------------------------------------------------------------
Paul Kocialkowski (2):
      fdt: Pass the device serial number through devicetree
      fdt: Documentation for a few support functions aside their prototypes

 common/fdt_support.c              | 25 +++++++++++++++++++++++++
 common/image-fdt.c                |  4 ++++
 doc/device-tree-bindings/root.txt |  4 ++++
 include/fdt_support.h             | 27 +++++++++++++++++++++++++++
 4 files changed, 60 insertions(+)
 create mode 100644 doc/device-tree-bindings/root.txt

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Fri, Apr 24, 2015 at 09:37:02AM -0600, Simon Glass wrote:

> Hi Tom,
> 
> The following changes since commit d8c1d5d5fb6eafbc532982125f006e49f2c40e71:
> 
>   Merge branch 'buildman' of git://git.denx.de/u-boot-x86 (2015-04-23
> 14:56:47 -0400)
> 
> are available in the git repository at:
> 
>   http://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 77d7fff8cec2652be8c2494b6b66d14a398ec860:
> 
>   fdt: Fix handling of paths with options in them (2015-04-23 22:54:32 -0600)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150428/a1e4cd05/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

The following changes since commit d8c1d5d5fb6eafbc532982125f006e49f2c40e71:

  Merge branch 'buildman' of git://git.denx.de/u-boot-x86 (2015-04-23
14:56:47 -0400)

are available in the git repository at:

  http://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 77d7fff8cec2652be8c2494b6b66d14a398ec860:

  fdt: Fix handling of paths with options in them (2015-04-23 22:54:32 -0600)

----------------------------------------------------------------
Hans de Goede (1):
      fdt: Fix handling of paths with options in them

 lib/libfdt/fdt_ro.c | 25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Fri, Apr 10, 2015 at 08:16:20AM -0600, Simon Glass wrote:

> Hi Tom,
> 
> One little fix.
> 
> 
> The following changes since commit 385a08a60f042061b004642d6b9bb6cfb794ad5a:
> 
>   ARM: zynq: Remove Jagan from list of maintainers (2015-04-08 18:43:51 -0400)
> 
> are available in the git repository at:
> 
>   http://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to 4bde2e9d604f3a7d80e9bcc2c5f363746971dcd7:
> 
>   fdt: nios: Fix warning in ft_cpu_setup() (2015-04-10 08:15:24 -0600)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150410/48946cd6/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

One little fix.


The following changes since commit 385a08a60f042061b004642d6b9bb6cfb794ad5a:

  ARM: zynq: Remove Jagan from list of maintainers (2015-04-08 18:43:51 -0400)

are available in the git repository at:

  http://git.denx.de/u-boot-fdt.git

for you to fetch changes up to 4bde2e9d604f3a7d80e9bcc2c5f363746971dcd7:

  fdt: nios: Fix warning in ft_cpu_setup() (2015-04-10 08:15:24 -0600)

----------------------------------------------------------------
Simon Glass (1):
      fdt: nios: Fix warning in ft_cpu_setup()

 arch/nios2/cpu/fdt.c | 2 --
 1 file changed, 2 deletions(-)

Regards,
Simon

[U-Boot] Please pull u-boot-fdt

[Tom Rini]

On Wed, Feb 18, 2015 at 06:09:28AM -0700, Simon Glass wrote:

> Hi Tom,
> 
> The following changes since commit 5745f8c4fd5807becf7f246625e153388293aedc:
> 
>   Merge git://git.denx.de/u-boot-marvell (2015-02-16 08:44:03 -0500)
> 
> are available in the git repository at:
> 
>   http://git.denx.de/u-boot-fdt.git
> 
> for you to fetch changes up to c71a0164d9b23e624552fb614bcb426a11119b57:
> 
>   cmd_fdt: Print the control fdt in terms of virtual memory
> (2015-02-17 20:19:16 -0700)
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150218/9f02ca0a/attachment.sig>

[U-Boot] Please pull u-boot-fdt

[Simon Glass]

Hi Tom,

The following changes since commit 5745f8c4fd5807becf7f246625e153388293aedc:

  Merge git://git.denx.de/u-boot-marvell (2015-02-16 08:44:03 -0500)

are available in the git repository at:

  http://git.denx.de/u-boot-fdt.git

for you to fetch changes up to c71a0164d9b23e624552fb614bcb426a11119b57:

  cmd_fdt: Print the control fdt in terms of virtual memory
(2015-02-17 20:19:16 -0700)

----------------------------------------------------------------
Joe Hershberger (2):
      cmd_fdt: Actually fix fdt command in sandbox
      cmd_fdt: Print the control fdt in terms of virtual memory

 common/bootm.c        |  2 +-
 common/cmd_fdt.c      | 10 +++++-----
 common/image-fdt.c    |  2 +-
 include/fdt_support.h |  2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

Regards,
Simon