[U-Boot] [PATCH V2 5/5] ARM: tegra: don't request GPIO from Seaboard's SPL

[Simon Glass <sjg@chromium.org>]

On Thu, Oct 18, 2012 at 4:25 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> From: Stephen Warren <swarren@nvidia.com>
>
> Seaboard has a GPIO that switches an external mux between Tegra's debug
> UART and SPI flash. This is initialized from the SPL so that SPL debug
> output can be seen. Simplify the code that does this, and don't actually
> request the GPIO in the SPL; just program it. This saves ~4.5K from the
> size of the SPL, mostly BSS due to the large gpio_names[] table that is
> no longer required. This makes Seaboard's SPL fit within the current max
> size.
>
> Signed-off-by: Stephen Warren <swarren@nvidia.com>

Acked-by: Simon Glass <sjg@chromium.org>

> ---
> v2: New patch to replace modification of CONFIG_SYS_TEXT_BASE.
> ---
>  board/nvidia/seaboard/seaboard.c |   14 ++++----------
>  1 files changed, 4 insertions(+), 10 deletions(-)
>
> diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
> index 6dce57f..c08ca80 100644
> --- a/board/nvidia/seaboard/seaboard.c
> +++ b/board/nvidia/seaboard/seaboard.c
> @@ -26,6 +26,7 @@
>  #include <asm/arch/tegra.h>
>  #include <asm/arch/clock.h>
>  #include <asm/arch/funcmux.h>
> +#include <asm/arch/gpio.h>
>  #include <asm/arch/pinmux.h>
>  #include <asm/arch-tegra/mmc.h>
>  #include <asm/gpio.h>
> @@ -36,21 +37,14 @@
>  /* TODO: Remove this code when the SPI switch is working */
>  #ifndef CONFIG_SPI_UART_SWITCH
>  #if CONFIG_MACH_TYPE != MACH_TYPE_VENTANA
> -/*
> - * Routine: gpio_config_uart_seaboard
> - * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
> - */
> -static void gpio_config_uart_seaboard(void)
> +void gpio_early_init_uart(void)
>  {
>         /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
> +#ifndef CONFIG_SPL_BUILD
>         gpio_request(GPIO_PI3, NULL);
> +#endif
>         gpio_direction_output(GPIO_PI3, 0);
>  }
> -
> -void gpio_early_init_uart(void)
> -{
> -       gpio_config_uart_seaboard();
> -}
>  #endif
>  #endif
>
> --
> 1.7.0.4
>