* [U-Boot] [PATCH v2 1/3] configs: at91sam9rlek: Update for DT and DM support
2017-04-12 9:18 [U-Boot] [PATCH v2 0/3] board: at91sam9rlek: Convert to support DM and DT Wenyou Yang
@ 2017-04-12 9:18 ` Wenyou Yang
2017-04-16 19:31 ` Simon Glass
2017-04-12 9:18 ` [U-Boot] [PATCH v2 2/3] board: at91sam9rlek: Clean up code Wenyou Yang
2017-04-12 9:18 ` [U-Boot] [PATCH v2 3/3] board: at91sam9rlek: Enable early debug UART Wenyou Yang
2 siblings, 1 reply; 7+ messages in thread
From: Wenyou Yang @ 2017-04-12 9:18 UTC (permalink / raw)
To: u-boot
Update the configuration files to support the device tree and driver
model. The device clock and pins configuration are handled by the
clock and the pinctrl drivers respectively.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
Changes in v2:
- Add converting UART to support DM_SERIAL and used in the
board_init_f stage.
- Remove unused LED feature.
- Improve the commit log.
board/atmel/at91sam9rlek/Makefile | 2 +-
configs/at91sam9rlek_dataflash_defconfig | 16 +++++++++++++++-
configs/at91sam9rlek_mmc_defconfig | 16 +++++++++++++++-
configs/at91sam9rlek_nandflash_defconfig | 16 +++++++++++++++-
include/configs/at91sam9rlek.h | 22 +---------------------
5 files changed, 47 insertions(+), 25 deletions(-)
diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile
index 51daf8d30c..7acfee5350 100644
--- a/board/atmel/at91sam9rlek/Makefile
+++ b/board/atmel/at91sam9rlek/Makefile
@@ -10,5 +10,5 @@
#
obj-y += at91sam9rlek.o
-obj-y += led.o
+obj-$(CONFIG_AT91_LED) += led.o
obj-$(CONFIG_HAS_DATAFLASH) += partition.o
diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig
index 49e1353b7d..24fbfe619c 100644
--- a/configs/at91sam9rlek_dataflash_defconfig
+++ b/configs/at91sam9rlek_dataflash_defconfig
@@ -1,6 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9RLEK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
@@ -20,5 +22,17 @@ CONFIG_CMD_MMC=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig
index 483d9b68ec..a46deac284 100644
--- a/configs/at91sam9rlek_mmc_defconfig
+++ b/configs/at91sam9rlek_mmc_defconfig
@@ -1,6 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9RLEK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
@@ -20,5 +22,17 @@ CONFIG_CMD_MMC=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig
index d7f2d7f1b3..b6400d0317 100644
--- a/configs/at91sam9rlek_nandflash_defconfig
+++ b/configs/at91sam9rlek_nandflash_defconfig
@@ -1,6 +1,8 @@
CONFIG_ARM=y
CONFIG_ARCH_AT91=y
CONFIG_TARGET_AT91SAM9RLEK=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
@@ -20,5 +22,17 @@ CONFIG_CMD_MMC=y
# CONFIG_CMD_NET is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_UTMI=y
+CONFIG_DM_GPIO=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_GENERIC_ATMEL_MCI=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_ATMEL_USART=y
CONFIG_LCD=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 8752f1f3b6..afc924d825 100644
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -29,18 +29,11 @@
#define CONFIG_INITRD_TAG 1
#define CONFIG_ATMEL_LEGACY
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_AT91_GPIO_PULLUP 1
/*
* Hardware drivers
*/
-/* serial console */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE ATMEL_BASE_DBGU
-#define CONFIG_USART_ID ATMEL_ID_SYS
-
/* LCD */
#define LCD_BPP LCD_COLOR8
#define CONFIG_LCD_LOGO 1
@@ -53,13 +46,6 @@
/* Let board_init_f handle the framebuffer allocation */
#undef CONFIG_FB_ADDR
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PD14 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PD15 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */
-
-
/*
* Command line configuration.
*/
@@ -72,7 +58,7 @@
#define CONFIG_SYS_SDRAM_SIZE 0x04000000
#define CONFIG_SYS_INIT_SP_ADDR \
- (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
+ (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
#define CONFIG_ATMEL_DATAFLASH_SPI
@@ -98,12 +84,6 @@
#endif
-/* MMC */
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
/* Ethernet - not present */
/* USB - not supported */
--
2.11.0
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH v2 3/3] board: at91sam9rlek: Enable early debug UART
2017-04-12 9:18 [U-Boot] [PATCH v2 0/3] board: at91sam9rlek: Convert to support DM and DT Wenyou Yang
2017-04-12 9:18 ` [U-Boot] [PATCH v2 1/3] configs: at91sam9rlek: Update for DT and DM support Wenyou Yang
2017-04-12 9:18 ` [U-Boot] [PATCH v2 2/3] board: at91sam9rlek: Clean up code Wenyou Yang
@ 2017-04-12 9:18 ` Wenyou Yang
2017-04-16 19:31 ` Simon Glass
2 siblings, 1 reply; 7+ messages in thread
From: Wenyou Yang @ 2017-04-12 9:18 UTC (permalink / raw)
To: u-boot
Enable the early debug UART to debug problems when an ICE or other
debug mechanism is not available.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---
Changes in v2:
- Add [PATCH]: board: at91sam9rlek: Enable early debug UART.
- Move out [PATCH]: ARM: dts: at91: add dts files for at91sam9rlek.
board/atmel/at91sam9rlek/at91sam9rlek.c | 13 +++++++++++++
configs/at91sam9rlek_dataflash_defconfig | 6 ++++++
configs/at91sam9rlek_mmc_defconfig | 6 ++++++
configs/at91sam9rlek_nandflash_defconfig | 6 ++++++
4 files changed, 31 insertions(+)
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
index 0c4d51765e..0b603ed13a 100644
--- a/board/atmel/at91sam9rlek/at91sam9rlek.c
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -7,6 +7,7 @@
*/
#include <common.h>
+#include <debug_uart.h>
#include <asm/io.h>
#include <asm/arch/at91sam9rl.h>
#include <asm/arch/at91sam9rl_matrix.h>
@@ -155,10 +156,22 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+ at91_seriald_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
return 0;
}
+#endif
int board_init(void)
{
diff --git a/configs/at91sam9rlek_dataflash_defconfig b/configs/at91sam9rlek_dataflash_defconfig
index 24fbfe619c..d4abb2a2fd 100644
--- a/configs/at91sam9rlek_dataflash_defconfig
+++ b/configs/at91sam9rlek_dataflash_defconfig
@@ -34,5 +34,11 @@ CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_LCD=y
diff --git a/configs/at91sam9rlek_mmc_defconfig b/configs/at91sam9rlek_mmc_defconfig
index a46deac284..9a40c41f36 100644
--- a/configs/at91sam9rlek_mmc_defconfig
+++ b/configs/at91sam9rlek_mmc_defconfig
@@ -34,5 +34,11 @@ CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_LCD=y
diff --git a/configs/at91sam9rlek_nandflash_defconfig b/configs/at91sam9rlek_nandflash_defconfig
index b6400d0317..d68b562b0e 100644
--- a/configs/at91sam9rlek_nandflash_defconfig
+++ b/configs/at91sam9rlek_nandflash_defconfig
@@ -34,5 +34,11 @@ CONFIG_GENERIC_ATMEL_MCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_AT91=y
CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_ATMEL=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=100000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ATMEL_USART=y
CONFIG_LCD=y
--
2.11.0
^ permalink raw reply related [flat|nested] 7+ messages in thread