* [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
@ 2013-05-24 12:45 Rajeshwari Shinde
2013-05-26 20:32 ` Simon Glass
2013-06-13 22:34 ` [U-Boot] [U-Boot,V2] " Andy Fleming
0 siblings, 2 replies; 5+ messages in thread
From: Rajeshwari Shinde @ 2013-05-24 12:45 UTC (permalink / raw)
To: u-boot
Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time
for mmc rescan command.
In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH
register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1).
Instead of storing the correct value, we were recalculating the FIFO_DEPT each
time which is not correct.
Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues"
http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247
Signed-off-by: Hatim Ali <hatim.rv@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
- remove fifoth_val local variable
- Rebased on top of "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve
EMMC read write issues".
drivers/mmc/dw_mmc.c | 14 ++++++--------
1 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 1307b12..5da20ed 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
static int dwmci_init(struct mmc *mmc)
{
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
- u32 fifo_size, fifoth_val;
+ u32 fifo_size;
dwmci_writel(host, DWMCI_PWREN, 1);
@@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc)
dwmci_writel(host, DWMCI_IDINTEN, 0);
dwmci_writel(host, DWMCI_BMOD, 1);
- fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
- fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
- if (host->fifoth_val) {
- fifoth_val = host->fifoth_val;
- } else {
- fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
+ if (!host->fifoth_val) {
+ fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+ fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
+ host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
TX_WMARK(fifo_size / 2);
}
- dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+ dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
dwmci_writel(host, DWMCI_CLKENA, 0);
dwmci_writel(host, DWMCI_CLKSRC, 0);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
2013-05-24 12:45 [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation Rajeshwari Shinde
@ 2013-05-26 20:32 ` Simon Glass
2013-05-27 3:43 ` Jaehoon Chung
2013-06-13 22:34 ` [U-Boot] [U-Boot,V2] " Andy Fleming
1 sibling, 1 reply; 5+ messages in thread
From: Simon Glass @ 2013-05-26 20:32 UTC (permalink / raw)
To: u-boot
On Fri, May 24, 2013 at 5:45 AM, Rajeshwari Shinde <rajeshwari.s@samsung.com
> wrote:
> Current DWMMC driver used to give FIFO underrun/overrun error every 3rd
> time
> for mmc rescan command.
> In current code FIFO_DEPTH is getting calculated after reading the default
> FIFOTH
> register and extracting the RX_WMARK bits from it i.e (RX_WMARK =
> FIFO_DEPTH/2 -1).
> Instead of storing the correct value, we were recalculating the FIFO_DEPT
> each
>
DEPTH
> time which is not correct.
>
> Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read
> write issues"
> http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247
>
> Signed-off-by: Hatim Ali <hatim.rv@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on pit using 'mmc rescan' and saw no problems now.
Tested-by: Simon Glass <sjg@chromium.org>
> ---
> Changes in V2:
> - remove fifoth_val local variable
> - Rebased on top of "[PATCH V9 3/9] DWMMC: Initialise dwmci and
> resolve
> EMMC read write issues".
> drivers/mmc/dw_mmc.c | 14 ++++++--------
> 1 files changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 1307b12..5da20ed 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
> static int dwmci_init(struct mmc *mmc)
> {
> struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
> - u32 fifo_size, fifoth_val;
> + u32 fifo_size;
>
> dwmci_writel(host, DWMCI_PWREN, 1);
>
> @@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc)
> dwmci_writel(host, DWMCI_IDINTEN, 0);
> dwmci_writel(host, DWMCI_BMOD, 1);
>
> - fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
> - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
> - if (host->fifoth_val) {
> - fifoth_val = host->fifoth_val;
> - } else {
> - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
> + if (!host->fifoth_val) {
> + fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
> + fifo_size = ((fifo_size & RX_WMARK_MASK) >>
> RX_WMARK_SHIFT) + 1;
> + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 -
> 1) |
> TX_WMARK(fifo_size / 2);
> }
> - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
> + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
>
> dwmci_writel(host, DWMCI_CLKENA, 0);
> dwmci_writel(host, DWMCI_CLKSRC, 0);
> --
> 1.7.4.4
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
2013-05-26 20:32 ` Simon Glass
@ 2013-05-27 3:43 ` Jaehoon Chung
0 siblings, 0 replies; 5+ messages in thread
From: Jaehoon Chung @ 2013-05-27 3:43 UTC (permalink / raw)
To: u-boot
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Thanks,
Jaehoon Chung
On 05/27/2013 05:32 AM, Simon Glass wrote:
> On Fri, May 24, 2013 at 5:45 AM, Rajeshwari Shinde <rajeshwari.s at samsung.com <mailto:rajeshwari.s@samsung.com>> wrote:
>
> Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time
> for mmc rescan command.
> In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH
> register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1).
> Instead of storing the correct value, we were recalculating the FIFO_DEPT each
>
>
> DEPTH
>
>
> time which is not correct.
>
> Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues"
> http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247
>
> Signed-off-by: Hatim Ali <hatim.rv at samsung.com <mailto:hatim.rv@samsung.com>>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com <mailto:rajeshwari.s@samsung.com>>
>
>
> Acked-by: Simon Glass <sjg at chromium.org <mailto:sjg@chromium.org>>
>
> Tested on pit using 'mmc rescan' and saw no problems now.
>
> Tested-by: Simon Glass <sjg at chromium.org <mailto:sjg@chromium.org>>
>
>
> ---
> Changes in V2:
> - remove fifoth_val local variable
> - Rebased on top of "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve
> EMMC read write issues".
> drivers/mmc/dw_mmc.c | 14 ++++++--------
> 1 files changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 1307b12..5da20ed 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -312,7 +312,7 @@ static void dwmci_set_ios(struct mmc *mmc)
> static int dwmci_init(struct mmc *mmc)
> {
> struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
> - u32 fifo_size, fifoth_val;
> + u32 fifo_size;
>
> dwmci_writel(host, DWMCI_PWREN, 1);
>
> @@ -332,15 +332,13 @@ static int dwmci_init(struct mmc *mmc)
> dwmci_writel(host, DWMCI_IDINTEN, 0);
> dwmci_writel(host, DWMCI_BMOD, 1);
>
> - fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
> - fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
> - if (host->fifoth_val) {
> - fifoth_val = host->fifoth_val;
> - } else {
> - fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
> + if (!host->fifoth_val) {
> + fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
> + fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
> + host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
> TX_WMARK(fifo_size / 2);
> }
> - dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
> + dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
>
> dwmci_writel(host, DWMCI_CLKENA, 0);
> dwmci_writel(host, DWMCI_CLKSRC, 0);
> --
> 1.7.4.4
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [U-Boot,V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
2013-05-24 12:45 [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation Rajeshwari Shinde
2013-05-26 20:32 ` Simon Glass
@ 2013-06-13 22:34 ` Andy Fleming
2013-06-17 2:07 ` Minkyu Kang
1 sibling, 1 reply; 5+ messages in thread
From: Andy Fleming @ 2013-06-13 22:34 UTC (permalink / raw)
To: u-boot
On Fri, May 24, 2013 at 06:15:34PM +0530, Rajeshwari Shinde wrote:
> Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time
> for mmc rescan command.
> In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH
> register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1).
> Instead of storing the correct value, we were recalculating the FIFO_DEPT each
> time which is not correct.
>
> Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues"
> http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247
>
> Signed-off-by: Hatim Ali <hatim.rv@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> Acked-by: Simon Glass <sjg@chromium.org>
> Tested-by: Simon Glass <sjg@chromium.org>
> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Looks like the patch this is based on is already accepted, but not yet
upstream, so I'm going to delegate the patch to Minkyu Kang
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [U-Boot,V2] MMC: DWMMC: Fix FIFO_DEPTH calculation
2013-06-13 22:34 ` [U-Boot] [U-Boot,V2] " Andy Fleming
@ 2013-06-17 2:07 ` Minkyu Kang
0 siblings, 0 replies; 5+ messages in thread
From: Minkyu Kang @ 2013-06-17 2:07 UTC (permalink / raw)
To: u-boot
On 14/06/13 07:34, Andy Fleming wrote:
> On Fri, May 24, 2013 at 06:15:34PM +0530, Rajeshwari Shinde wrote:
>> Current DWMMC driver used to give FIFO underrun/overrun error every 3rd time
>> for mmc rescan command.
>> In current code FIFO_DEPTH is getting calculated after reading the default FIFOTH
>> register and extracting the RX_WMARK bits from it i.e (RX_WMARK = FIFO_DEPTH/2 -1).
>> Instead of storing the correct value, we were recalculating the FIFO_DEPT each
>> time which is not correct.
>>
>> Based on "[PATCH V9 3/9] DWMMC: Initialise dwmci and resolve EMMC read write issues"
>> http://permalink.gmane.org/gmane.comp.boot-loaders.u-boot/160247
>>
>> Signed-off-by: Hatim Ali <hatim.rv@samsung.com>
>> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
>> Acked-by: Simon Glass <sjg@chromium.org>
>> Tested-by: Simon Glass <sjg@chromium.org>
>> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
>
> Acked-by: Andy Fleming <afleming@freescale.com>
>
> Looks like the patch this is based on is already accepted, but not yet
> upstream, so I'm going to delegate the patch to Minkyu Kang
>
>
>
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-06-17 2:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-24 12:45 [U-Boot] [PATCH V2] MMC: DWMMC: Fix FIFO_DEPTH calculation Rajeshwari Shinde
2013-05-26 20:32 ` Simon Glass
2013-05-27 3:43 ` Jaehoon Chung
2013-06-13 22:34 ` [U-Boot] [U-Boot,V2] " Andy Fleming
2013-06-17 2:07 ` Minkyu Kang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.