* [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support
@ 2012-10-26 5:49 Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 1/9 V4] SOUND: SAMSUNG: Add I2S driver Rajeshwari Shinde
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patchset adds the audio support for EXYNOS5.
This patchset plays a predefined beep sound.
Rajeshwari Shinde (9):
SOUND: SAMSUNG: Add I2S driver
SOUND: Add WM8994 codec
Sound: Add command for audio playback
EXYNOS: Add I2S registers
EXYNOS: Add parameters required by I2S
EXYNOS: Add pinmux for I2S
EXYNOS: Add I2S base address
EXYNOS: Add clock for I2S
SMDK5250: Enable Sound
Changes in V2:
- renamed i2s.c to samsung-i2s.c.
- made exynos_i2s_config pinmux function static.
- corrected the commit message for "Enable sound" patch.
Changes in V3:
- Incorporated comments from Simon Glass and Minkyu Kang.
Changes in V4:
- Corrected the coding style issues suggested by Simon Glass.
Makefile | 1 +
arch/arm/cpu/armv7/exynos/clock.c | 120 ++++
arch/arm/cpu/armv7/exynos/pinmux.c | 13 +
arch/arm/include/asm/arch-exynos/clk.h | 3 +
arch/arm/include/asm/arch-exynos/clock.h | 29 +
arch/arm/include/asm/arch-exynos/cpu.h | 3 +
arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 +++
arch/arm/include/asm/arch-exynos/periph.h | 1 +
arch/arm/include/asm/arch-exynos/sound.h | 44 ++
common/Makefile | 1 +
common/cmd_sound.c | 96 ++++
drivers/sound/Makefile | 48 ++
drivers/sound/samsung-i2s.c | 358 ++++++++++++
drivers/sound/sound.c | 228 ++++++++
drivers/sound/wm8994.c | 792 +++++++++++++++++++++++++++
drivers/sound/wm8994.h | 87 +++
drivers/sound/wm8994_registers.h | 299 ++++++++++
include/configs/smdk5250.h | 8 +
include/i2s.h | 127 +++++
include/sound.h | 62 +++
20 files changed, 2386 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h
create mode 100644 arch/arm/include/asm/arch-exynos/sound.h
create mode 100644 common/cmd_sound.c
create mode 100644 drivers/sound/Makefile
create mode 100644 drivers/sound/samsung-i2s.c
create mode 100644 drivers/sound/sound.c
create mode 100644 drivers/sound/wm8994.c
create mode 100644 drivers/sound/wm8994.h
create mode 100644 drivers/sound/wm8994_registers.h
create mode 100644 include/i2s.h
create mode 100644 include/sound.h
--
1.7.4.4
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 1/9 V4] SOUND: SAMSUNG: Add I2S driver
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 2/9 V4] SOUND: Add WM8994 codec Rajeshwari Shinde
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds driver for I2S interface specific to samsung.
Signed-off-by: R. Chandrasekar <rcsekar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- renamed i2s.c to samsung-i2s.c.
Changes in V3:
- wave sine table removed and the same in calculated in a function.
Changes in V4:
- Corrected the coding style issues suggested by Simon Glass.
- Global variables in sound.c were made static.
Makefile | 1 +
drivers/sound/Makefile | 47 ++++++
drivers/sound/samsung-i2s.c | 358 +++++++++++++++++++++++++++++++++++++++++++
drivers/sound/sound.c | 228 +++++++++++++++++++++++++++
include/i2s.h | 127 +++++++++++++++
include/sound.h | 62 ++++++++
6 files changed, 823 insertions(+), 0 deletions(-)
create mode 100644 drivers/sound/Makefile
create mode 100644 drivers/sound/samsung-i2s.c
create mode 100644 drivers/sound/sound.c
create mode 100644 include/i2s.h
create mode 100644 include/sound.h
diff --git a/Makefile b/Makefile
index 08eecbb..ee4fb7f 100644
--- a/Makefile
+++ b/Makefile
@@ -311,6 +311,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o
endif
LIBS-y += drivers/rtc/librtc.o
LIBS-y += drivers/serial/libserial.o
+LIBS-y += drivers/sound/libsound.o
LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o
LIBS-y += drivers/twserial/libtws.o
LIBS-y += drivers/usb/eth/libusb_eth.o
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
new file mode 100644
index 0000000..18ad2c9
--- /dev/null
+++ b/drivers/sound/Makefile
@@ -0,0 +1,47 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+# R. Chandrasekar <rcsekar@samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libsound.o
+
+COBJS-$(CONFIG_SOUND) += sound.o
+COBJS-$(CONFIG_I2S) += samsung-i2s.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#
diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c
new file mode 100644
index 0000000..9f3117d
--- /dev/null
+++ b/drivers/sound/samsung-i2s.c
@@ -0,0 +1,358 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/i2s-regs.h>
+#include <asm/io.h>
+#include <common.h>
+#include <sound.h>
+#include <i2s.h>
+
+#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf)
+#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf)
+#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf)
+#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf)
+#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f)
+
+#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */
+
+/*
+ * Sets the frame size for I2S LR clock
+ *
+ * @param i2s_reg i2s regiter address
+ * @param rfs Frame Size
+ */
+static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ mod &= ~MOD_RCLK_MASK;
+
+ switch (rfs) {
+ case 768:
+ mod |= MOD_RCLK_768FS;
+ break;
+ case 512:
+ mod |= MOD_RCLK_512FS;
+ break;
+ case 384:
+ mod |= MOD_RCLK_384FS;
+ break;
+ default:
+ mod |= MOD_RCLK_256FS;
+ break;
+ }
+
+ writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * Sets the i2s transfer control
+ *
+ * @param i2s_reg i2s regiter address
+ * @param on 1 enable tx , 0 disable tx transfer
+ */
+static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
+{
+ unsigned int con = readl(&i2s_reg->con);
+ unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
+
+ if (on) {
+ con |= CON_ACTIVE;
+ con &= ~CON_TXCH_PAUSE;
+
+ } else {
+
+ con |= CON_TXCH_PAUSE;
+ con &= ~CON_ACTIVE;
+ }
+
+ writel(mod, &i2s_reg->mod);
+ writel(con, &i2s_reg->con);
+}
+
+/*
+ * set the bit clock frame size (in multiples of LRCLK)
+ *
+ * @param i2s_reg i2s regiter address
+ * @param bfs bit Frame Size
+ */
+static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ mod &= ~MOD_BCLK_MASK;
+
+ switch (bfs) {
+ case 48:
+ mod |= MOD_BCLK_48FS;
+ break;
+ case 32:
+ mod |= MOD_BCLK_32FS;
+ break;
+ case 24:
+ mod |= MOD_BCLK_24FS;
+ break;
+ case 16:
+ mod |= MOD_BCLK_16FS;
+ break;
+ default:
+ return;
+ }
+ writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * flushes the i2stx fifo
+ *
+ * @param i2s_reg i2s regiter address
+ * @param flush Tx fifo flush command (0x00 - do not flush
+ * 0x80 - flush tx fifo)
+ */
+void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
+{
+ /* Flush the FIFO */
+ setbits_le32(&i2s_reg->fic, flush);
+ clrbits_le32(&i2s_reg->fic, flush);
+}
+
+/*
+ * Set System Clock direction
+ *
+ * @param i2s_reg i2s regiter address
+ * @param dir Clock direction
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ if (dir == SND_SOC_CLOCK_IN)
+ mod |= MOD_CDCLKCON;
+ else
+ mod &= ~MOD_CDCLKCON;
+
+ writel(mod, &i2s_reg->mod);
+
+ return 0;
+}
+
+/*
+ * Sets I2S Clcok format
+ *
+ * @param fmt i2s clock properties
+ * @param i2s_reg i2s regiter address
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+ unsigned int tmp = 0;
+ unsigned int ret = 0;
+
+ /* Format is priority */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_RIGHT_J:
+ tmp |= MOD_LR_RLOW;
+ tmp |= MOD_SDF_MSB;
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ tmp |= MOD_LR_RLOW;
+ tmp |= MOD_SDF_LSB;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ tmp |= MOD_SDF_IIS;
+ break;
+ default:
+ debug("%s: Invalid format priority [0x%x]\n", __func__,
+ (fmt & SND_SOC_DAIFMT_FORMAT_MASK));
+ return -1;
+ }
+
+ /*
+ * INV flag is relative to the FORMAT flag - if set it simply
+ * flips the polarity specified by the Standard
+ */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ if (tmp & MOD_LR_RLOW)
+ tmp &= ~MOD_LR_RLOW;
+ else
+ tmp |= MOD_LR_RLOW;
+ break;
+ default:
+ debug("%s: Invalid clock ploarity input [0x%x]\n", __func__,
+ (fmt & SND_SOC_DAIFMT_INV_MASK));
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ tmp |= MOD_SLAVE;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ /* Set default source clock in Master mode */
+ ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
+ if (ret != 0) {
+ debug("%s:set i2s clock direction failed\n", __func__);
+ return -1;
+ }
+ break;
+ default:
+ debug("%s: Invalid master selection [0x%x]\n", __func__,
+ (fmt & SND_SOC_DAIFMT_MASTER_MASK));
+ return -1;
+ }
+
+ mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
+ mod |= tmp;
+ writel(mod, &i2s_reg->mod);
+
+ return 0;
+}
+
+/*
+ * Sets the sample width in bits
+ *
+ * @param blc samplewidth (size of sample in bits)
+ * @param i2s_reg i2s regiter address
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
+{
+ unsigned int mod = readl(&i2s_reg->mod);
+
+ mod &= ~MOD_BLCP_MASK;
+ mod &= ~MOD_BLC_MASK;
+
+ switch (blc) {
+ case 8:
+ mod |= MOD_BLCP_8BIT;
+ mod |= MOD_BLC_8BIT;
+ break;
+ case 16:
+ mod |= MOD_BLCP_16BIT;
+ mod |= MOD_BLC_16BIT;
+ break;
+ case 24:
+ mod |= MOD_BLCP_24BIT;
+ mod |= MOD_BLC_24BIT;
+ break;
+ default:
+ debug("%s: Invalid sample size input [0x%x]\n",
+ __func__, blc);
+ return -1;
+ }
+ writel(mod, &i2s_reg->mod);
+
+ return 0;
+}
+
+int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data,
+ unsigned long data_size)
+{
+ int i;
+ int start;
+ struct i2s_reg *i2s_reg =
+ (struct i2s_reg *)pi2s_tx->base_address;
+
+ if (data_size < FIFO_LENGTH) {
+ debug("%s : Invalid data size\n", __func__);
+ return -1; /* invalid pcm data size */
+ }
+
+ /* fill the tx buffer before stating the tx transmit */
+ for (i = 0; i < FIFO_LENGTH; i++)
+ writel(*data++, &i2s_reg->txd);
+
+ data_size -= FIFO_LENGTH;
+ i2s_txctrl(i2s_reg, I2S_TX_ON);
+
+ while (data_size > 0) {
+ start = get_timer(0);
+ if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
+ writel(*data++, &i2s_reg->txd);
+ data_size--;
+ } else {
+ if (get_timer(start) > TIMEOUT_I2S_TX) {
+ i2s_txctrl(i2s_reg, I2S_TX_OFF);
+ debug("%s: I2S Transfer Timeout\n", __func__);
+ return -1;
+ }
+ }
+ }
+ i2s_txctrl(i2s_reg, I2S_TX_OFF);
+
+ return 0;
+}
+
+int i2s_tx_init(struct i2stx_info *pi2s_tx)
+{
+ int ret;
+ struct i2s_reg *i2s_reg =
+ (struct i2s_reg *)pi2s_tx->base_address;
+
+ /* Initialize GPIO for I2s */
+ exynos_pinmux_config(PERIPH_ID_I2S1, 0);
+
+ /* Set EPLL Clock */
+ ret = set_epll_clk(pi2s_tx->audio_pll_clk);
+ if (ret != 0) {
+ debug("%s: epll clock set rate falied\n", __func__);
+ return -1;
+ }
+
+ /* Select Clk Source for Audio1 */
+ set_i2s_clk_source();
+
+ /* Set Prescaler to get MCLK */
+ set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)));
+
+ /* Configure I2s format */
+ ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM));
+ if (ret == 0) {
+ i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
+ ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
+ if (ret != 0) {
+ debug("%s:set sample rate failed\n", __func__);
+ return -1;
+ }
+
+ i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
+ /* disable i2s transfer flag and flush the fifo */
+ i2s_txctrl(i2s_reg, I2S_TX_OFF);
+ i2s_fifo(i2s_reg, FIC_TXFLUSH);
+ } else {
+ debug("%s: failed\n", __func__);
+ }
+
+ return ret;
+}
diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
new file mode 100644
index 0000000..4c74534
--- /dev/null
+++ b/drivers/sound/sound.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <malloc.h>
+#include <common.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include "wm8994.h"
+#include <asm/arch/sound.h>
+
+/* defines */
+#define SOUND_400_HZ 400
+#define SOUND_BITS_IN_BYTE 8
+
+static struct i2stx_info g_i2stx_pri;
+static struct sound_codec_info g_codec_info;
+
+/*
+ * get_sound_fdt_values gets fdt values for i2s parameters
+ *
+ * @param i2stx_info i2s transmitter transfer param structure
+ * @param blob FDT blob
+ */
+static void get_sound_i2s_values(struct i2stx_info *i2s)
+{
+ i2s->base_address = samsung_get_base_i2s();
+ i2s->audio_pll_clk = I2S_PLL_CLK;
+ i2s->samplingrate = I2S_SAMPLING_RATE;
+ i2s->bitspersample = I2S_BITS_PER_SAMPLE;
+ i2s->channels = I2S_CHANNELS;
+ i2s->rfs = I2S_RFS;
+ i2s->bfs = I2S_BFS;
+}
+
+/*
+ * Gets fdt values for wm8994 config parameters
+ *
+ * @param pcodec_info codec information structure
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
+{
+ int error = 0;
+
+ switch (AUDIO_COMPAT) {
+ case AUDIO_COMPAT_SPI:
+ debug("%s: Support not added for SPI interface\n", __func__);
+ return -1;
+ break;
+ case AUDIO_COMPAT_I2C:
+ pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+ pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+ debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+ break;
+ default:
+ debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT);
+ return -1;
+ }
+
+ if (error == -1) {
+ debug("fail to get wm8994 codec node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Gets fdt values for codec config parameters
+ *
+ * @param pcodec_info codec information structure
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
+{
+ int error = 0;
+ const char *codectype;
+
+ codectype = AUDIO_CODEC;
+
+ if (!strcmp(codectype, "wm8994")) {
+ pcodec_info->codec_type = CODEC_WM_8994;
+ error = get_sound_wm8994_values(pcodec_info);
+ } else {
+ error = -1;
+ }
+
+ if (error == -1) {
+ debug("fail to get sound codec node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+int sound_init(void)
+{
+ int ret;
+ struct i2stx_info *pi2s_tx = &g_i2stx_pri;
+ struct sound_codec_info *pcodec_info = &g_codec_info;
+
+ /* Get the I2S Values */
+ get_sound_i2s_values(pi2s_tx);
+
+ /* Get the codec Values */
+ if (get_sound_codec_values(pcodec_info) < 0)
+ return -1;
+
+ ret = i2s_tx_init(pi2s_tx);
+ if (ret) {
+ debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
+ ret);
+ return ret;
+ }
+
+ /* Check the codec type and initialise the same */
+ if (pcodec_info->codec_type == CODEC_WM_8994) {
+ ret = wm8994_init(pcodec_info, WM8994_AIF2,
+ pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample, pi2s_tx->channels);
+ } else {
+ debug("%s: Unknown code type %d\n", __func__,
+ pcodec_info->codec_type);
+ return -1;
+ }
+ if (ret) {
+ debug("%s: Codec init failed\n", __func__);
+ return -1;
+ }
+
+ return ret;
+}
+
+/*
+ * Generates square wave sound data for 1 second
+ *
+ * @param data data buffer pointer
+ * @param size size of the buffer
+ * @param freq frequency of the wave
+ */
+static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq)
+{
+ const int sample = 48000;
+ const unsigned short amplitude = 16000; /* between 1 and 32767 */
+ const int period = freq ? sample / freq : 0;
+ const int half = period / 2;
+
+ assert(freq);
+
+ /* Make sure we don't overflow our buffer */
+ if (size % 2)
+ size--;
+
+ while (size) {
+ int i;
+ for (i = 0; size && i < half; i++) {
+ size -= 2;
+ *data++ = amplitude;
+ *data++ = amplitude;
+ }
+ for (i = 0; size && i < period - half; i++) {
+ size -= 2;
+ *data++ = -amplitude;
+ *data++ = -amplitude;
+ }
+ }
+}
+
+int sound_play(uint32_t msec, uint32_t frequency)
+{
+ unsigned int *data;
+ unsigned long data_size;
+ unsigned int ret = 0;
+
+ /*Buffer length computation */
+ data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
+ data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
+ data = malloc(data_size);
+
+ if (data == NULL) {
+ debug("%s: malloc failed\n", __func__);
+ return -1;
+ }
+
+ sound_prepare_buffer((unsigned short *)data,
+ data_size / sizeof(unsigned short), frequency);
+
+ while (msec >= 1000) {
+ ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
+ (data_size / sizeof(int)));
+ msec -= 1000;
+ }
+ if (msec) {
+ unsigned long size =
+ (data_size * msec) / (sizeof(int) * 1000);
+
+ ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
+ }
+
+ free(data);
+
+ return ret;
+}
diff --git a/include/i2s.h b/include/i2s.h
new file mode 100644
index 0000000..75ae75c
--- /dev/null
+++ b/include/i2s.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __I2S_H__
+#define __I2S_H__
+
+/*
+ * DAI hardware audio formats.
+ *
+ * Describes the physical PCM data formating and clocking. Add new formats
+ * to the end.
+ */
+#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */
+#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */
+#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */
+#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */
+#define SND_SOC_DAIFMT_AC97 6 /* AC97 */
+#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */
+
+/* left and right justified also known as MSB and LSB respectively */
+#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
+#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J
+
+/*
+ * DAI hardware signal inversions.
+ *
+ * Specifies whether the DAI can also support inverted clocks for the specified
+ * format.
+ */
+#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */
+#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */
+#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */
+#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */
+
+/*
+ * DAI hardware clock masters.
+ *
+ * This is wrt the codec, the inverse is true for the interface
+ * i.e. if the codec is clk and FRM master then the interface is
+ * clk and frame slave.
+ */
+#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */
+#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */
+#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */
+#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */
+
+#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
+#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
+#define SND_SOC_DAIFMT_INV_MASK 0x0f00
+#define SND_SOC_DAIFMT_MASTER_MASK 0xf000
+
+/*
+ * Master Clock Directions
+ */
+#define SND_SOC_CLOCK_IN 0
+#define SND_SOC_CLOCK_OUT 1
+
+/* I2S Tx Control */
+#define I2S_TX_ON 1
+#define I2S_TX_OFF 0
+
+#define FIFO_LENGTH 64
+
+/* I2s Registers */
+struct i2s_reg {
+ unsigned int con; /* base + 0 , Control register */
+ unsigned int mod; /* Mode register */
+ unsigned int fic; /* FIFO control register */
+ unsigned int psr; /* Reserved */
+ unsigned int txd; /* Transmit data register */
+ unsigned int rxd; /* Receive Data Register */
+};
+
+/* This structure stores the i2s related information */
+struct i2stx_info {
+ unsigned int rfs; /* LR clock frame size */
+ unsigned int bfs; /* Bit slock frame size */
+ unsigned int audio_pll_clk; /* Audio pll frequency in Hz */
+ unsigned int samplingrate; /* sampling rate */
+ unsigned int bitspersample; /* bits per sample */
+ unsigned int channels; /* audio channels */
+ unsigned int base_address; /* I2S Register Base */
+};
+
+/*
+ * Sends the given data through i2s tx
+ *
+ * @param pi2s_tx pointer of i2s transmitter parameter structure.
+ * @param data address of the data buffer
+ * @param data_size array size of the int buffer (total size / size of int)
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned *data,
+ unsigned long data_size);
+
+/*
+ * Initialise i2s transmiter
+ *
+ * @param pi2s_tx pointer of i2s transmitter parameter structure.
+ *
+ * @return int value 0 for success, -1 in case of error
+ */
+int i2s_tx_init(struct i2stx_info *pi2s_tx);
+
+#endif /* __I2S_H__ */
diff --git a/include/sound.h b/include/sound.h
new file mode 100644
index 0000000..ea0b115
--- /dev/null
+++ b/include/sound.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar < rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SOUND_H__
+#define __SOUND_H__
+
+/* sound codec enum */
+enum en_sound_codec {
+ CODEC_WM_8994,
+ CODEC_WM_8995,
+ CODEC_MAX
+};
+
+/* sound codec enum */
+enum sound_compat {
+ AUDIO_COMPAT_SPI,
+ AUDIO_COMPAT_I2C,
+};
+
+/* Codec information structure to store the info from device tree */
+struct sound_codec_info {
+ int i2c_bus;
+ int i2c_dev_addr;
+ enum en_sound_codec codec_type;
+};
+
+/*
+ * Initialises audio sub system
+ *
+ * @return int value 0 for success, -1 for error
+ */
+int sound_init(void);
+
+/*
+ * plays the pcm data buffer in pcm_data.h through i2s1 to make the
+ * sine wave sound
+ *
+ * @return int 0 for success, -1 for error
+ */
+int sound_play(uint32_t msec, uint32_t frequency);
+
+#endif /* __SOUND__H__ */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 2/9 V4] SOUND: Add WM8994 codec
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 1/9 V4] SOUND: SAMSUNG: Add I2S driver Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 3/9 V4] Sound: Add command for audio playback Rajeshwari Shinde
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds driver for audio codec WM8994
Signed-off-by: R. Chandrasekar <rcsekar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- Incorporated comments from Simon Glass.
Changes in V4:
- None
drivers/sound/Makefile | 1 +
drivers/sound/wm8994.c | 792 ++++++++++++++++++++++++++++++++++++++
drivers/sound/wm8994.h | 87 +++++
drivers/sound/wm8994_registers.h | 299 ++++++++++++++
4 files changed, 1179 insertions(+), 0 deletions(-)
create mode 100644 drivers/sound/wm8994.c
create mode 100644 drivers/sound/wm8994.h
create mode 100644 drivers/sound/wm8994_registers.h
diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 18ad2c9..8fdffb1 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libsound.o
COBJS-$(CONFIG_SOUND) += sound.o
COBJS-$(CONFIG_I2S) += samsung-i2s.o
+COBJS-$(CONFIG_SOUND_WM8994) += wm8994.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c
new file mode 100644
index 0000000..293903a
--- /dev/null
+++ b/drivers/sound/wm8994.c
@@ -0,0 +1,792 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include "wm8994.h"
+#include "wm8994_registers.h"
+
+/* defines for wm8994 system clock selection */
+#define SEL_MCLK1 0x00
+#define SEL_MCLK2 0x08
+#define SEL_FLL1 0x10
+#define SEL_FLL2 0x18
+
+/* fll config to configure fll */
+struct wm8994_fll_config {
+ int src; /* Source */
+ int in; /* Input frequency in Hz */
+ int out; /* output frequency in Hz */
+};
+
+/* codec private data */
+struct wm8994_priv {
+ enum wm8994_type type; /* codec type of wolfson */
+ int revision; /* Revision */
+ int sysclk[WM8994_MAX_AIF]; /* System clock frequency in Hz */
+ int mclk[WM8994_MAX_AIF]; /* master clock frequency in Hz */
+ int aifclk[WM8994_MAX_AIF]; /* audio interface clock in Hz */
+ struct wm8994_fll_config fll[2]; /* fll config to configure fll */
+};
+
+/* wm 8994 supported sampling rate values */
+static unsigned int src_rate[] = {
+ 8000, 11025, 12000, 16000, 22050, 24000,
+ 32000, 44100, 48000, 88200, 96000
+};
+
+/* op clock divisions */
+static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
+
+/* lr clock frame size ratio */
+static int fs_ratios[] = {
+ 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536
+};
+
+/* bit clock divisors */
+static int bclk_divs[] = {
+ 10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
+ 640, 880, 960, 1280, 1760, 1920
+};
+
+static struct wm8994_priv g_wm8994_info;
+static unsigned char g_wm8994_i2c_dev_addr;
+
+/*
+ * Initialise I2C for wm 8994
+ *
+ * @param bus no i2c bus number in which wm8994 is connected
+ */
+static void wm8994_i2c_init(int bus_no)
+{
+ i2c_set_bus_num(bus_no);
+}
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg reg number to be write
+ * @param data data to be writen to the above registor
+ *
+ * @return int value 1 for change, 0 for no change or negative error code.
+ */
+static int wm8994_i2c_write(unsigned int reg, unsigned short data)
+{
+ unsigned char val[2];
+
+ val[0] = (unsigned char)((data >> 8) & 0xff);
+ val[1] = (unsigned char)(data & 0xff);
+ debug("Write Addr : 0x%04X, Data : 0x%04X\n", reg, data);
+
+ return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg reg number to be read
+ * @param data address of read data to be stored
+ *
+ * @return int value 0 for success, -1 in case of error.
+ */
+static unsigned int wm8994_i2c_read(unsigned int reg , unsigned short *data)
+{
+ unsigned char val[2];
+ int ret;
+
+ ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+ if (ret != 0) {
+ debug("%s: Error while reading register %#04x\n",
+ __func__, reg);
+ return -1;
+ }
+
+ *data = val[0];
+ *data <<= 8;
+ *data |= val[1];
+
+ return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg codec register
+ * @param mask register mask
+ * @param value new value
+ *
+ * @return int value 1 if change in the register value,
+ * 0 for no change or negative error code.
+ */
+static int wm8994_update_bits(unsigned int reg, unsigned short mask,
+ unsigned short value)
+{
+ int change , ret = 0;
+ unsigned short old, new;
+
+ if (wm8994_i2c_read(reg, &old) != 0)
+ return -1;
+ new = (old & ~mask) | (value & mask);
+ change = (old != new) ? 1 : 0;
+ if (change)
+ ret = wm8994_i2c_write(reg, new);
+ if (ret < 0)
+ return ret;
+
+ return change;
+}
+
+/*
+ * Sets i2s set format
+ *
+ * @param aif_id Interface ID
+ * @param fmt i2S format
+ *
+ * @return -1 for error and 0 Success.
+ */
+int wm8994_set_fmt(int aif_id, unsigned int fmt)
+{
+ int ms_reg;
+ int aif_reg;
+ int ms = 0;
+ int aif = 0;
+ int aif_clk = 0;
+ int error = 0;
+
+ switch (aif_id) {
+ case 1:
+ ms_reg = WM8994_AIF1_MASTER_SLAVE;
+ aif_reg = WM8994_AIF1_CONTROL_1;
+ aif_clk = WM8994_AIF1_CLOCKING_1;
+ break;
+ case 2:
+ ms_reg = WM8994_AIF2_MASTER_SLAVE;
+ aif_reg = WM8994_AIF2_CONTROL_1;
+ aif_clk = WM8994_AIF2_CLOCKING_1;
+ break;
+ default:
+ debug("%s: Invalid audio interface selection\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ ms = WM8994_AIF1_MSTR;
+ break;
+ default:
+ debug("%s: Invalid i2s master selection\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
+ aif |= WM8994_AIF1_LRCLK_INV;
+ case SND_SOC_DAIFMT_DSP_A:
+ aif |= 0x18;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ aif |= 0x10;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ aif |= 0x8;
+ break;
+ default:
+ debug("%s: Invalid i2s format selection\n", __func__);
+ return -1;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
+ /* frame inversion not valid for DSP modes */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8994_AIF1_BCLK_INV;
+ break;
+ default:
+ debug("%s: Invalid i2s frame inverse selection\n",
+ __func__);
+ return -1;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_I2S:
+ case SND_SOC_DAIFMT_RIGHT_J:
+ case SND_SOC_DAIFMT_LEFT_J:
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ aif |= WM8994_AIF1_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ aif |= WM8994_AIF1_LRCLK_INV;
+ break;
+ default:
+ debug("%s: Invalid i2s clock polarity selection\n",
+ __func__);
+ return -1;
+ }
+ break;
+ default:
+ debug("%s: Invalid i2s format selection\n", __func__);
+ return -1;
+ }
+
+ error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV |
+ WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif);
+
+ error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms);
+ error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK,
+ WM8994_AIF1CLK_ENA);
+ if (error < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Sets hw params FOR WM8994
+ *
+ * @param wm8994 wm8994 information pointer
+ * @param aif_id Audio interface ID
+ * @param sampling_rate Sampling rate
+ * @param bits_per_sample Bits per sample
+ * @param Channels Channels in the given audio input
+ *
+ * @return -1 for error and 0 Success.
+ */
+static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id,
+ unsigned int sampling_rate, unsigned int bits_per_sample,
+ unsigned int channels)
+{
+ int aif1_reg;
+ int aif2_reg;
+ int bclk_reg;
+ int bclk = 0;
+ int rate_reg;
+ int aif1 = 0;
+ int aif2 = 0;
+ int rate_val = 0;
+ int id = aif_id - 1;
+ int i, cur_val, best_val, bclk_rate, best;
+ unsigned short reg_data;
+ int ret = 0;
+
+ switch (aif_id) {
+ case 1:
+ aif1_reg = WM8994_AIF1_CONTROL_1;
+ aif2_reg = WM8994_AIF1_CONTROL_2;
+ bclk_reg = WM8994_AIF1_BCLK;
+ rate_reg = WM8994_AIF1_RATE;
+ break;
+ case 2:
+ aif1_reg = WM8994_AIF2_CONTROL_1;
+ aif2_reg = WM8994_AIF2_CONTROL_2;
+ bclk_reg = WM8994_AIF2_BCLK;
+ rate_reg = WM8994_AIF2_RATE;
+ break;
+ default:
+ return -1;
+ }
+
+ bclk_rate = sampling_rate * 32;
+ switch (bits_per_sample) {
+ case 16:
+ bclk_rate *= 16;
+ break;
+ case 20:
+ bclk_rate *= 20;
+ aif1 |= 0x20;
+ break;
+ case 24:
+ bclk_rate *= 24;
+ aif1 |= 0x40;
+ break;
+ case 32:
+ bclk_rate *= 32;
+ aif1 |= 0x60;
+ break;
+ default:
+ return -1;
+ }
+
+ /* Try to find an appropriate sample rate; look for an exact match. */
+ for (i = 0; i < ARRAY_SIZE(src_rate); i++)
+ if (src_rate[i] == sampling_rate)
+ break;
+
+ if (i == ARRAY_SIZE(src_rate)) {
+ debug("%s: Could not get the best matching samplingrate\n",
+ __func__);
+ return -1;
+ }
+
+ rate_val |= i << WM8994_AIF1_SR_SHIFT;
+
+ /* AIFCLK/fs ratio; look for a close match in either direction */
+ best = 0;
+ best_val = abs((fs_ratios[0] * sampling_rate)
+ - wm8994->aifclk[id]);
+
+ for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
+ cur_val = abs((fs_ratios[i] * sampling_rate)
+ - wm8994->aifclk[id]);
+ if (cur_val >= best_val)
+ continue;
+ best = i;
+ best_val = cur_val;
+ }
+
+ rate_val |= best;
+
+ /*
+ * We may not get quite the right frequency if using
+ * approximate clocks so look for the closest match that is
+ * higher than the target (we need to ensure that there enough
+ * BCLKs to clock out the samples).
+ */
+ best = 0;
+ for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+ cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
+ if (cur_val < 0) /* BCLK table is sorted */
+ break;
+ best = i;
+ }
+
+ if (i == ARRAY_SIZE(bclk_divs)) {
+ debug("%s: Could not get the best matching bclk division\n",
+ __func__);
+ return -1;
+ }
+
+ bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
+ bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
+
+ if (wm8994_i2c_read(aif1_reg, ®_data) != 0) {
+ debug("%s: AIF1 register read Failed\n", __func__);
+ return -1;
+ }
+
+ if ((channels == 1) && ((reg_data & 0x18) == 0x18))
+ aif2 |= WM8994_AIF1_MONO;
+
+ if (wm8994->aifclk[id] == 0) {
+ debug("%s:Audio interface clock not set\n", __func__);
+ return -1;
+ }
+
+ ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1);
+ ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2);
+ ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
+ ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK |
+ WM8994_AIF1CLK_RATE_MASK, rate_val);
+
+ debug("rate vale = %x , bclk val= %x\n", rate_val, bclk);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Configures Audio interface Clock
+ *
+ * @param wm8994 wm8994 information pointer
+ * @param aif Audio Interface ID
+ *
+ * @return -1 for error and 0 Success.
+ */
+static int configure_aif_clock(struct wm8994_priv *wm8994, int aif)
+{
+ int rate;
+ int reg1 = 0;
+ int offset;
+ int ret;
+
+ /* AIF(1/0) register adress offset calculated */
+ if (aif)
+ offset = 4;
+ else
+ offset = 0;
+
+ switch (wm8994->sysclk[aif]) {
+ case WM8994_SYSCLK_MCLK1:
+ reg1 |= SEL_MCLK1;
+ rate = wm8994->mclk[0];
+ break;
+
+ case WM8994_SYSCLK_MCLK2:
+ reg1 |= SEL_MCLK2;
+ rate = wm8994->mclk[1];
+ break;
+
+ case WM8994_SYSCLK_FLL1:
+ reg1 |= SEL_FLL1;
+ rate = wm8994->fll[0].out;
+ break;
+
+ case WM8994_SYSCLK_FLL2:
+ reg1 |= SEL_FLL2;
+ rate = wm8994->fll[1].out;
+ break;
+
+ default:
+ debug("%s: Invalid input clock selection [%d]\n",
+ __func__, wm8994->sysclk[aif]);
+ return -1;
+ }
+
+ /* if input clock frequenct is more than 135Mhz then divide */
+ if (rate >= WM8994_MAX_INPUT_CLK_FREQ) {
+ rate /= 2;
+ reg1 |= WM8994_AIF1CLK_DIV;
+ }
+
+ wm8994->aifclk[aif] = rate;
+
+ ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset,
+ WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
+ reg1);
+
+ ret |= wm8994_update_bits(WM8994_CLOCKING_1,
+ WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK |
+ WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC |
+ WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Configures Audio interface for the given frequency
+ *
+ * @param wm8994 wm8994 information
+ * @param aif_id Audio Interface
+ * @param clk_id Input Clock ID
+ * @param freq Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id,
+ int clk_id, unsigned int freq)
+{
+ int i;
+ int ret = 0;
+
+ wm8994->sysclk[aif_id - 1] = clk_id;
+
+ switch (clk_id) {
+ case WM8994_SYSCLK_MCLK1:
+ wm8994->mclk[0] = freq;
+ if (aif_id == 2) {
+ ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 ,
+ WM8994_AIF2DAC_DIV_MASK , 0);
+ }
+ break;
+
+ case WM8994_SYSCLK_MCLK2:
+ /* TODO: Set GPIO AF */
+ wm8994->mclk[1] = freq;
+ break;
+
+ case WM8994_SYSCLK_FLL1:
+ case WM8994_SYSCLK_FLL2:
+ break;
+
+ case WM8994_SYSCLK_OPCLK:
+ /*
+ * Special case - a division (times 10) is given and
+ * no effect on main clocking.
+ */
+ if (freq) {
+ for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
+ if (opclk_divs[i] == freq)
+ break;
+ if (i == ARRAY_SIZE(opclk_divs)) {
+ debug("%s frequency divisor not found\n",
+ __func__);
+ return -1;
+ }
+ ret = wm8994_update_bits(WM8994_CLOCKING_2,
+ WM8994_OPCLK_DIV_MASK, i);
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+ WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
+ } else {
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+ WM8994_OPCLK_ENA, 0);
+ }
+
+ default:
+ debug("%s Invalid input clock selection [%d]\n",
+ __func__, clk_id);
+ return -1;
+ }
+
+ ret |= configure_aif_clock(wm8994, aif_id - 1);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Initializes Volume for AIF2 to HP path
+ *
+ * @returns -1 for error and 0 Success.
+ *
+ */
+static int wm8994_init_volume_aif2_dac1(void)
+{
+ int ret;
+
+ /* Unmute AIF2DAC */
+ ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1,
+ WM8994_AIF2DAC_MUTE_MASK, 0);
+
+
+ ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME,
+ WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK,
+ WM8994_AIF2DAC_VU | 0xff);
+
+ ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME,
+ WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK,
+ WM8994_AIF2DAC_VU | 0xff);
+
+
+ ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
+ WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
+ WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+
+ ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
+ WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
+ WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+ /* Head Phone Volume */
+ ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
+ ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
+
+ if (ret < 0) {
+ debug("%s: codec register access error\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Intialise wm8994 codec device
+ *
+ * @param wm8994 wm8994 information
+ *
+ * @returns -1 for error and 0 Success.
+ */
+static int wm8994_device_init(struct wm8994_priv *wm8994)
+{
+ const char *devname;
+ unsigned short reg_data;
+ int ret;
+
+ wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */
+
+ ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, ®_data);
+ if (ret < 0) {
+ debug("Failed to read ID register\n");
+ goto err;
+ }
+
+ if (reg_data == WM8994_ID) {
+ devname = "WM8994";
+ debug("Device registered as type %d\n", wm8994->type);
+ wm8994->type = WM8994;
+ } else {
+ debug("Device is not a WM8994, ID is %x\n", ret);
+ ret = -1;
+ goto err;
+ }
+
+ ret = wm8994_i2c_read(WM8994_CHIP_REVISION, ®_data);
+ if (ret < 0) {
+ debug("Failed to read revision register: %d\n", ret);
+ goto err;
+ }
+ wm8994->revision = reg_data;
+ debug("%s revision %c\n", devname, 'A' + wm8994->revision);
+
+ /* VMID Selection */
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+ WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3);
+
+ /* Charge Pump Enable */
+ ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK,
+ WM8994_CP_ENA);
+
+ /* Head Phone Power Enable */
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+ WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA);
+
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+ WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA);
+
+ /* Power enable for AIF2 and DAC1 */
+ ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5,
+ WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK |
+ WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK,
+ WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | WM8994_DAC1L_ENA |
+ WM8994_DAC1R_ENA);
+
+ /* Head Phone Initialisation */
+ ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+ WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK,
+ WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY);
+
+ ret |= wm8994_update_bits(WM8994_DC_SERVO_1,
+ WM8994_DCS_ENA_CHAN_0_MASK |
+ WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 |
+ WM8994_DCS_ENA_CHAN_1);
+
+ ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+ WM8994_HPOUT1L_DLY_MASK |
+ WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK |
+ WM8994_HPOUT1R_OUTP_MASK |
+ WM8994_HPOUT1L_RMV_SHORT_MASK |
+ WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY |
+ WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP |
+ WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT |
+ WM8994_HPOUT1R_RMV_SHORT);
+
+ /* MIXER Config DAC1 to HP */
+ ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1,
+ WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L);
+
+ ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2,
+ WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R);
+
+ /* Routing AIF2 to DAC1 */
+ ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING,
+ WM8994_AIF2DACL_TO_DAC1L_MASK,
+ WM8994_AIF2DACL_TO_DAC1L);
+
+ ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING,
+ WM8994_AIF2DACR_TO_DAC1R_MASK,
+ WM8994_AIF2DACR_TO_DAC1R);
+
+ /* GPIO Settings for AIF2 */
+ /* B CLK */
+ ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK |
+ WM8994_GPIO_FUNCTION_MASK ,
+ WM8994_GPIO_DIR_OUTPUT |
+ WM8994_GPIO_FUNCTION_I2S_CLK);
+
+ /* LR CLK */
+ ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK |
+ WM8994_GPIO_FUNCTION_MASK,
+ WM8994_GPIO_DIR_OUTPUT |
+ WM8994_GPIO_FUNCTION_I2S_CLK);
+
+ /* DATA */
+ ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK |
+ WM8994_GPIO_FUNCTION_MASK,
+ WM8994_GPIO_DIR_OUTPUT |
+ WM8994_GPIO_FUNCTION_I2S_CLK);
+
+ ret |= wm8994_init_volume_aif2_dac1();
+ if (ret < 0)
+ goto err;
+
+ debug("%s: Codec chip init ok\n", __func__);
+ return 0;
+err:
+ debug("%s: Codec chip init error\n", __func__);
+ return -1;
+}
+
+/*wm8994 Device Initialisation */
+int wm8994_init(struct sound_codec_info *pcodec_info,
+ enum en_audio_interface aif_id,
+ int sampling_rate, int mclk_freq,
+ int bits_per_sample, unsigned int channels)
+{
+ int ret = 0;
+
+ /* shift the device address by 1 for 7 bit addressing */
+ g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
+ wm8994_i2c_init(pcodec_info->i2c_bus);
+
+ if (pcodec_info->codec_type == CODEC_WM_8994)
+ g_wm8994_info.type = WM8994;
+ else {
+ debug("%s: Codec id [%d] not defined\n", __func__,
+ pcodec_info->codec_type);
+ return -1;
+ }
+
+ ret = wm8994_device_init(&g_wm8994_info);
+ if (ret < 0) {
+ debug("%s: wm8994 codec chip init failed\n", __func__);
+ return ret;
+ }
+
+ ret = wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1,
+ mclk_freq);
+ if (ret < 0) {
+ debug("%s: wm8994 codec set sys clock failed\n", __func__);
+ return ret;
+ }
+
+ ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate,
+ bits_per_sample, channels);
+
+ if (ret == 0) {
+ ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+ }
+ return ret;
+}
diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h
new file mode 100644
index 0000000..a8f0de1
--- /dev/null
+++ b/drivers/sound/wm8994.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chadrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __WM8994_H__
+#define __WM8994_H__
+
+/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */
+#define WM8994_SYSCLK_MCLK1 1
+#define WM8994_SYSCLK_MCLK2 2
+#define WM8994_SYSCLK_FLL1 3
+#define WM8994_SYSCLK_FLL2 4
+
+/* Avilable audi interface ports in wm8994 codec */
+enum en_audio_interface {
+ WM8994_AIF1 = 1,
+ WM8994_AIF2,
+ WM8994_AIF3
+};
+
+/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */
+#define WM8994_SYSCLK_OPCLK 5
+
+#define WM8994_FLL1 1
+#define WM8994_FLL2 2
+
+#define WM8994_FLL_SRC_MCLK1 1
+#define WM8994_FLL_SRC_MCLK2 2
+#define WM8994_FLL_SRC_LRCLK 3
+#define WM8994_FLL_SRC_BCLK 4
+
+/* maximum available digital interfac in the dac to configure */
+#define WM8994_MAX_AIF 2
+
+#define WM8994_MAX_INPUT_CLK_FREQ 13500000
+#define WM8994_ID 0x8994
+
+enum wm8994_vmid_mode {
+ WM8994_VMID_NORMAL,
+ WM8994_VMID_FORCE,
+};
+
+/* wm 8994 family devices */
+enum wm8994_type {
+ WM8994 = 0,
+ WM8958 = 1,
+ WM1811 = 2,
+};
+
+/*
+ * intialise wm8994 sound codec device for the given configuration
+ *
+ * @param pcodec_info pointer value of the sound codec info structure
+ * parsed from device tree
+ * @param aif_id enum value of codec interface port in which
+ * soc i2s is connected
+ * @param sampling_rate Sampling rate ranges between from 8khz to 96khz
+ * @param mclk_freq Master clock frequency.
+ * @param bits_per_sample bits per Sample can be 16 or 24
+ * @param channels Number of channnels, maximum 2
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int wm8994_init(struct sound_codec_info *pcodec_info,
+ enum en_audio_interface aif_id,
+ int sampling_rate, int mclk_freq,
+ int bits_per_sample, unsigned int channels);
+#endif /*__WM8994_H__ */
diff --git a/drivers/sound/wm8994_registers.h b/drivers/sound/wm8994_registers.h
new file mode 100644
index 0000000..f455b11
--- /dev/null
+++ b/drivers/sound/wm8994_registers.h
@@ -0,0 +1,299 @@
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __WM8994_REGISTERS_H__
+#define __WM8994_REGISTERS_H__
+
+/*
+ * Register values.
+ */
+#define WM8994_SOFTWARE_RESET 0x00
+#define WM8994_POWER_MANAGEMENT_1 0x01
+#define WM8994_POWER_MANAGEMENT_2 0x02
+#define WM8994_POWER_MANAGEMENT_5 0x05
+#define WM8994_LEFT_OUTPUT_VOLUME 0x1C
+#define WM8994_RIGHT_OUTPUT_VOLUME 0x1D
+#define WM8994_OUTPUT_MIXER_1 0x2D
+#define WM8994_OUTPUT_MIXER_2 0x2E
+#define WM8994_CHARGE_PUMP_1 0x4C
+#define WM8994_DC_SERVO_1 0x54
+#define WM8994_ANALOGUE_HP_1 0x60
+#define WM8994_CHIP_REVISION 0x100
+#define WM8994_AIF1_CLOCKING_1 0x200
+#define WM8994_AIF1_CLOCKING_2 0x201
+#define WM8994_AIF2_CLOCKING_1 0x204
+#define WM8994_CLOCKING_1 0x208
+#define WM8994_CLOCKING_2 0x209
+#define WM8994_AIF1_RATE 0x210
+#define WM8994_AIF2_RATE 0x211
+#define WM8994_RATE_STATUS 0x212
+#define WM8994_AIF1_CONTROL_1 0x300
+#define WM8994_AIF1_CONTROL_2 0x301
+#define WM8994_AIF1_MASTER_SLAVE 0x302
+#define WM8994_AIF1_BCLK 0x303
+#define WM8994_AIF2_CONTROL_1 0x310
+#define WM8994_AIF2_CONTROL_2 0x311
+#define WM8994_AIF2_MASTER_SLAVE 0x312
+#define WM8994_AIF2_BCLK 0x313
+#define WM8994_AIF2_DAC_LEFT_VOLUME 0x502
+#define WM8994_AIF2_DAC_RIGHT_VOLUME 0x503
+#define WM8994_AIF2_DAC_FILTERS_1 0x520
+#define WM8994_DAC1_LEFT_MIXER_ROUTING 0x601
+#define WM8994_DAC1_RIGHT_MIXER_ROUTING 0x602
+#define WM8994_DAC1_LEFT_VOLUME 0x610
+#define WM8994_DAC1_RIGHT_VOLUME 0x611
+#define WM8994_GPIO_3 0x702
+#define WM8994_GPIO_4 0x703
+#define WM8994_GPIO_5 0x704
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+/* SW_RESET */
+#define WM8994_SW_RESET 1
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA 0x0200
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_MASK 0x0200
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA 0x0100
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_MASK 0x0100
+/* VMID_SEL - [2:1] */
+#define WM8994_VMID_SEL_MASK 0x0006
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA 0x0001
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA_MASK 0x0001
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+/* OPCLK_ENA */
+#define WM8994_OPCLK_ENA 0x0800
+
+/*
+ * R5 (0x05) - Power Management (5)
+ */
+/* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA 0x2000
+#define WM8994_AIF2DACL_ENA_MASK 0x2000
+/* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA 0x1000
+#define WM8994_AIF2DACR_ENA_MASK 0x1000
+/* DAC1L_ENA */
+#define WM8994_DAC1L_ENA 0x0002
+#define WM8994_DAC1L_ENA_MASK 0x0002
+/* DAC1R_ENA */
+#define WM8994_DAC1R_ENA 0x0001
+#define WM8994_DAC1R_ENA_MASK 0x0001
+
+/*
+ * R45 (0x2D) - Output Mixer (1)
+ */
+/* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L 0x0100
+#define WM8994_DAC1L_TO_HPOUT1L_MASK 0x0100
+
+/*
+ * R46 (0x2E) - Output Mixer (2)
+ */
+/* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R 0x0100
+#define WM8994_DAC1R_TO_HPOUT1R_MASK 0x0100
+
+/*
+ * R76 (0x4C) - Charge Pump (1)
+ */
+/* CP_ENA */
+#define WM8994_CP_ENA 0x8000
+#define WM8994_CP_ENA_MASK 0x8000
+/*
+ * R84 (0x54) - DC Servo (1)
+ */
+/* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1 0x0002
+#define WM8994_DCS_ENA_CHAN_1_MASK 0x0002
+/* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0 0x0001
+#define WM8994_DCS_ENA_CHAN_0_MASK 0x0001
+
+/*
+ * R96 (0x60) - Analogue HP (1)
+ */
+/* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT 0x0080
+#define WM8994_HPOUT1L_RMV_SHORT_MASK 0x0080
+/* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP 0x0040
+#define WM8994_HPOUT1L_OUTP_MASK 0x0040
+/* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY 0x0020
+#define WM8994_HPOUT1L_DLY_MASK 0x0020
+/* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT 0x0008
+#define WM8994_HPOUT1R_RMV_SHORT_MASK 0x0008
+/* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP 0x0004
+#define WM8994_HPOUT1R_OUTP_MASK 0x0004
+/* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY 0x0002
+#define WM8994_HPOUT1R_DLY_MASK 0x0002
+
+/*
+ * R512 (0x200) - AIF1 Clocking (1)
+ */
+/* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_SRC_MASK 0x0018
+/* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV 0x0002
+/* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA 0x0001
+#define WM8994_AIF1CLK_ENA_MASK 0x0001
+
+/*
+ * R517 (0x205) - AIF2 Clocking (2)
+ */
+/* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2DAC_DIV_MASK 0x0038
+
+/*
+ * R520 (0x208) - Clocking (1)
+ */
+/* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA 0x0004
+#define WM8994_AIF2DSPCLK_ENA_MASK 0x0004
+/* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA 0x0002
+#define WM8994_SYSDSPCLK_ENA_MASK 0x0002
+/* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC 0x0001
+
+/*
+ * R521 (0x209) - Clocking (2)
+ */
+/* OPCLK_DIV - [2:0] */
+#define WM8994_OPCLK_DIV_MASK 0x0007
+
+/*
+ * R528 (0x210) - AIF1 Rate
+ */
+/* AIF1_SR - [7:4] */
+#define WM8994_AIF1_SR_MASK 0x00F0
+#define WM8994_AIF1_SR_SHIFT 4
+/* AIF1CLK_RATE - [3:0] */
+#define WM8994_AIF1CLK_RATE_MASK 0x000F
+
+/*
+ * R768 (0x300) - AIF1 Control (1)
+ */
+/* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV 0x0100
+/* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV 0x0080
+#define WM8994_AIF1_LRCLK_INV_MASK 0x0080
+/* AIF1_WL - [6:5] */
+#define WM8994_AIF1_WL_MASK 0x0060
+/* AIF1_FMT - [4:3] */
+#define WM8994_AIF1_FMT_MASK 0x0018
+
+/*
+ * R769 (0x301) - AIF1 Control (2)
+ */
+/* AIF1_MONO */
+#define WM8994_AIF1_MONO 0x0100
+
+/*
+ * R770 (0x302) - AIF1 Master/Slave
+ */
+/* AIF1_MSTR */
+#define WM8994_AIF1_MSTR 0x4000
+#define WM8994_AIF1_MSTR_MASK 0x4000
+
+/*
+ * R771 (0x303) - AIF1 BCLK
+ */
+/* AIF1_BCLK_DIV - [8:4] */
+#define WM8994_AIF1_BCLK_DIV_MASK 0x01F0
+#define WM8994_AIF1_BCLK_DIV_SHIFT 4
+
+/*
+ * R1282 (0x502) - AIF2 DAC Left Volume
+ */
+/* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU 0x0100
+#define WM8994_AIF2DAC_VU_MASK 0x0100
+/* AIF2DACL_VOL - [7:0] */
+#define WM8994_AIF2DACL_VOL_MASK 0x00FF
+
+/*
+ * R1283 (0x503) - AIF2 DAC Right Volume
+ */
+/* AIF2DACR_VOL - [7:0] */
+#define WM8994_AIF2DACR_VOL_MASK 0x00FF
+
+/*
+ * R1312 (0x520) - AIF2 DAC Filters (1)
+ */
+/* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_MASK 0x0200
+
+/*
+ * R1537 (0x601) - DAC1 Left Mixer Routing
+ */
+/* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L 0x0004
+#define WM8994_AIF2DACL_TO_DAC1L_MASK 0x0004
+
+/*
+ * R1538 (0x602) - DAC1 Right Mixer Routing
+ */
+/* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R 0x0004
+#define WM8994_AIF2DACR_TO_DAC1R_MASK 0x0004
+
+/*
+ * R1552 (0x610) - DAC1 Left Volume
+ */
+/* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_MASK 0x0200
+/* DAC1_VU */
+#define WM8994_DAC1_VU 0x0100
+#define WM8994_DAC1_VU_MASK 0x0100
+/* DAC1L_VOL - [7:0] */
+#define WM8994_DAC1L_VOL_MASK 0x00FF
+
+/*
+ * R1553 (0x611) - DAC1 Right Volume
+ */
+/* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_MASK 0x0200
+/* DAC1R_VOL - [7:0] */
+#define WM8994_DAC1R_VOL_MASK 0x00FF
+
+/*
+ * GPIO
+ */
+/* OUTPUT PIN */
+#define WM8994_GPIO_DIR_OUTPUT 0x8000
+/* GPIO PIN MASK */
+#define WM8994_GPIO_DIR_MASK 0xFFE0
+/* I2S CLK */
+#define WM8994_GPIO_FUNCTION_I2S_CLK 0x0000
+/* GPn FN */
+#define WM8994_GPIO_FUNCTION_MASK 0x001F
+#endif
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 3/9 V4] Sound: Add command for audio playback
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 1/9 V4] SOUND: SAMSUNG: Add I2S driver Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 2/9 V4] SOUND: Add WM8994 codec Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 4/9 V4] EXYNOS: Add I2S registers Rajeshwari Shinde
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds command to test audio playback.
sound init - Initialises the audio subsystem (i2s and wm8994 codec)
sound play - Plays predefined the audio data when specified length
and frequency.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- Incorporated comments from Simon Glass.
Changes in V4:
- None
common/Makefile | 1 +
common/cmd_sound.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 97 insertions(+), 0 deletions(-)
create mode 100644 common/cmd_sound.c
diff --git a/common/Makefile b/common/Makefile
index fdfead7..3f9f001 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -74,6 +74,7 @@ COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
COBJS-$(CONFIG_CMD_DATE) += cmd_date.o
+COBJS-$(CONFIG_CMD_SOUND) += cmd_sound.o
ifdef CONFIG_4xx
COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o
endif
diff --git a/common/cmd_sound.c b/common/cmd_sound.c
new file mode 100644
index 0000000..459d1eb
--- /dev/null
+++ b/common/cmd_sound.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <fdtdec.h>
+#include <sound.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Initilaise sound subsystem */
+static int do_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ int ret;
+
+ ret = sound_init();
+ if (ret) {
+ printf("Initialise Audio driver failed\n");
+ return CMD_RET_FAILURE;
+ }
+
+ return 0;
+}
+
+/* play sound from buffer */
+static int do_play(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ int ret = 0;
+ int msec = 1000;
+ int freq = 400;
+
+ if (argc > 1)
+ msec = simple_strtoul(argv[1], NULL, 10);
+ if (argc > 2)
+ freq = simple_strtoul(argv[2], NULL, 10);
+
+ ret = sound_play(msec, freq);
+ if (ret) {
+ printf("play failed");
+ return CMD_RET_FAILURE;
+ }
+
+ return 0;
+}
+
+static cmd_tbl_t cmd_sound_sub[] = {
+ U_BOOT_CMD_MKENT(init, 0, 1, do_init, "", ""),
+ U_BOOT_CMD_MKENT(play, 2, 1, do_play, "", ""),
+};
+
+/* process sound command */
+static int do_sound(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ cmd_tbl_t *c;
+
+ if (argc < 1)
+ return CMD_RET_USAGE;
+
+ /* Strip off leading 'sound' command argument */
+ argc--;
+ argv++;
+
+ c = find_cmd_tbl(argv[0], &cmd_sound_sub[0], ARRAY_SIZE(cmd_sound_sub));
+
+ if (c)
+ return c->cmd(cmdtp, flag, argc, argv);
+ else
+ return CMD_RET_USAGE;
+}
+
+U_BOOT_CMD(
+ sound, 4, 1, do_sound,
+ "sound sub-system",
+ "init - initialise the sound driver\n"
+ "sound play [len] [freq] - play a sound for len ms at freq hz\n"
+);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 4/9 V4] EXYNOS: Add I2S registers
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (2 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 3/9 V4] Sound: Add command for audio playback Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 5/9 V4] EXYNOS: Add parameters required by I2S Rajeshwari Shinde
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch add I2S registers
Signed-off-by: R. Chandrasekar <rcsekar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- None
Changes in V4:
- None
arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 +++++++++++++++++++++++++++
1 files changed, 66 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h
diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h
new file mode 100644
index 0000000..2326ca0
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __I2S_REGS_H__
+#define __I2S_REGS_H__
+
+#define CON_TXFIFO_FULL (1 << 8)
+#define CON_TXCH_PAUSE (1 << 4)
+#define CON_ACTIVE (1 << 0)
+
+#define MOD_BLCP_SHIFT 24
+#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT)
+#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT)
+
+#define MOD_BLC_16BIT (0 << 13)
+#define MOD_BLC_8BIT (1 << 13)
+#define MOD_BLC_24BIT (2 << 13)
+#define MOD_BLC_MASK (3 << 13)
+
+#define MOD_SLAVE (1 << 11)
+#define MOD_MASK (3 << 8)
+#define MOD_LR_LLOW (0 << 7)
+#define MOD_LR_RLOW (1 << 7)
+#define MOD_SDF_IIS (0 << 5)
+#define MOD_SDF_MSB (1 << 5)
+#define MOD_SDF_LSB (2 << 5)
+#define MOD_SDF_MASK (3 << 5)
+#define MOD_RCLK_256FS (0 << 3)
+#define MOD_RCLK_512FS (1 << 3)
+#define MOD_RCLK_384FS (2 << 3)
+#define MOD_RCLK_768FS (3 << 3)
+#define MOD_RCLK_MASK (3 << 3)
+#define MOD_BCLK_32FS (0 << 1)
+#define MOD_BCLK_48FS (1 << 1)
+#define MOD_BCLK_16FS (2 << 1)
+#define MOD_BCLK_24FS (3 << 1)
+#define MOD_BCLK_MASK (3 << 1)
+
+#define MOD_CDCLKCON (1 << 12)
+
+#define FIC_TXFLUSH (1 << 15)
+#define FIC_RXFLUSH (1 << 7)
+
+#endif /* __I2S_REGS_H__ */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 5/9 V4] EXYNOS: Add parameters required by I2S
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (3 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 4/9 V4] EXYNOS: Add I2S registers Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 6/9 V4] EXYNOS: Add pinmux for I2S Rajeshwari Shinde
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds the audio parameters required by the I2S to play the
predefined audio data.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- Changed codec I2C address to 0x1a.
Changes in V4:
- None
arch/arm/include/asm/arch-exynos/sound.h | 44 ++++++++++++++++++++++++++++++
1 files changed, 44 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/arch-exynos/sound.h
diff --git a/arch/arm/include/asm/arch-exynos/sound.h b/arch/arm/include/asm/arch-exynos/sound.h
new file mode 100644
index 0000000..d1bd2f6
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/sound.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * Rajeshwari Shinde <rajeshwari.s@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __SOUND_ARCH_H__
+#define __SOUND_ARCH_H__
+
+/* I2S values */
+#define I2S_PLL_CLK 192000000
+#define I2S_SAMPLING_RATE 48000
+#define I2S_BITS_PER_SAMPLE 16
+#define I2S_CHANNELS 2
+#define I2S_RFS 256
+#define I2S_BFS 32
+
+/* I2C values */
+#define AUDIO_I2C_BUS 1
+#define AUDIO_I2C_REG 0x1a
+
+/* Audio Codec */
+#define AUDIO_CODEC "wm8994"
+
+#define AUDIO_COMPAT 1
+#endif
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 6/9 V4] EXYNOS: Add pinmux for I2S
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (4 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 5/9 V4] EXYNOS: Add parameters required by I2S Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 7/9 V4] EXYNOS: Add I2S base address Rajeshwari Shinde
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds pinmux support for I2S1
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- made exynos_i2s_config pinmux function static.
Changes in V3:
- Incorporated comments from Simon Glass
Changes in V4:
- None
arch/arm/cpu/armv7/exynos/pinmux.c | 13 +++++++++++++
arch/arm/include/asm/arch-exynos/periph.h | 1 +
2 files changed, 14 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 5796d56..d99daa0 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -230,6 +230,16 @@ static void exynos5_i2c_config(int peripheral, int flags)
}
}
+static void exynos5_i2s_config(int peripheral)
+{
+ int i;
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+
+ for (i = 0; i < 5; i++)
+ s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+}
+
static int exynos5_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
@@ -257,6 +267,9 @@ static int exynos5_pinmux_config(int peripheral, int flags)
case PERIPH_ID_I2C7:
exynos5_i2c_config(peripheral, flags);
break;
+ case PERIPH_ID_I2S1:
+ exynos5_i2s_config(peripheral);
+ break;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return -1;
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 082611c..673f4c7 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -38,6 +38,7 @@ enum periph_id {
PERIPH_ID_I2C5,
PERIPH_ID_I2C6,
PERIPH_ID_I2C7,
+ PERIPH_ID_I2S1,
PERIPH_ID_SDMMC0,
PERIPH_ID_SDMMC1,
PERIPH_ID_SDMMC2,
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 7/9 V4] EXYNOS: Add I2S base address
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (5 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 6/9 V4] EXYNOS: Add pinmux for I2S Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 8/9 V4] EXYNOS: Add clock for I2S Rajeshwari Shinde
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds base address for I2S
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- None
Changes in V4:
- None
arch/arm/include/asm/arch-exynos/cpu.h | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index 2cd4ae1..ace40e5 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -54,6 +54,7 @@
#define EXYNOS4_PWMTIMER_BASE 0x139D0000
#define EXYNOS4_MODEM_BASE 0x13A00000
#define EXYNOS4_USBPHY_CONTROL 0x10020704
+#define EXYNOS4_I2S_BASE 0xE2100000
#define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE
@@ -81,6 +82,7 @@
#define EXYNOS5_SROMC_BASE 0x12250000
#define EXYNOS5_UART_BASE 0x12C00000
#define EXYNOS5_I2C_BASE 0x12C60000
+#define EXYNOS5_I2S_BASE 0x12D60000
#define EXYNOS5_PWMTIMER_BASE 0x12DD0000
#define EXYNOS5_GPIO_PART2_BASE 0x13400000
#define EXYNOS5_FIMD_BASE 0x14400000
@@ -156,6 +158,7 @@ SAMSUNG_BASE(dp, DP_BASE)
SAMSUNG_BASE(sysreg, SYSREG_BASE)
SAMSUNG_BASE(fimd, FIMD_BASE)
SAMSUNG_BASE(i2c, I2C_BASE)
+SAMSUNG_BASE(i2s, I2S_BASE)
SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE)
SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE)
SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE)
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 8/9 V4] EXYNOS: Add clock for I2S
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (6 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 7/9 V4] EXYNOS: Add I2S base address Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 9/9 V4] SMDK5250: Enable Sound Rajeshwari Shinde
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch adds clock support for I2S
Signed-off-by: R. Chandrasekar <rcsekar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- Changes clock function names as suggested by Minkyu Kang.
Changes in V4:
- None
arch/arm/cpu/armv7/exynos/clock.c | 120 ++++++++++++++++++++++++++++++
arch/arm/include/asm/arch-exynos/clk.h | 3 +
arch/arm/include/asm/arch-exynos/clock.h | 29 +++++++
3 files changed, 152 insertions(+), 0 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 4f3b451..5f7d884 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -26,6 +26,16 @@
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
+/* Epll Clock division values to achive different frequency output */
+static struct set_epll_con_val exynos5_epll_div[] = {
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 180000000, 0, 45, 3, 1, 0 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 67737600, 1, 90, 4, 3, 20762 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 45158400, 0, 45, 3, 3, 10381 },
+ { 180633600, 0, 45, 3, 1, 10381 }
+};
/* exynos4: return pll clock frequency */
static unsigned long exynos4_get_pll_clk(int pllreg)
{
@@ -732,6 +742,93 @@ static unsigned long exynos5_get_i2c_clk(void)
return aclk_66;
}
+int exynos5_set_epll_clk(unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+ unsigned int lockcnt;
+ unsigned int start;
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ epll_con = readl(&clk->epll_con0);
+ epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK <<
+ EPLL_CON0_LOCK_DET_EN_SHIFT) |
+ EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT |
+ EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT |
+ EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) {
+ if (exynos5_epll_div[i].freq_out == rate)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(exynos5_epll_div))
+ return -1;
+
+ epll_con_k = exynos5_epll_div[i].k_dsm << 0;
+ epll_con |= exynos5_epll_div[i].en_lock_det <<
+ EPLL_CON0_LOCK_DET_EN_SHIFT;
+ epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT;
+ epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT;
+ epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT;
+
+ /*
+ * Required period ( in cycles) to genarate a stable clock output.
+ * The maximum clock time can be up to 3000 * PDIV cycles of PLLs
+ * frequency input (as per spec)
+ */
+ lockcnt = 3000 * exynos5_epll_div[i].p_div;
+
+ writel(lockcnt, &clk->epll_lock);
+ writel(epll_con, &clk->epll_con0);
+ writel(epll_con_k, &clk->epll_con1);
+
+ start = get_timer(0);
+
+ while (!(readl(&clk->epll_con0) &
+ (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) {
+ if (get_timer(start) > TIMEOUT_EPLL_LOCK) {
+ debug("%s: Timeout waiting for EPLL lock\n", __func__);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+void exynos5_set_i2s_clk_source(void)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+
+ clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK,
+ (CLK_SRC_SCLK_EPLL));
+}
+
+int exynos5_set_i2s_clk_prescaler(unsigned int src_frq,
+ unsigned int dst_frq)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned int div;
+
+ if ((dst_frq == 0) || (src_frq == 0)) {
+ debug("%s: Invalid requency input for prescaler\n", __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+
+ div = (src_frq / dst_frq);
+ if (div > AUDIO_1_RATIO_MASK) {
+ debug("%s: Frequency ratio is out of range\n", __func__);
+ debug("src frq = %d des frq = %d ", src_frq, dst_frq);
+ return -1;
+ }
+ clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK,
+ (div & AUDIO_1_RATIO_MASK));
+ return 0;
+}
+
unsigned long get_pll_clk(int pllreg)
{
if (cpu_is_exynos5())
@@ -803,3 +900,26 @@ void set_mipi_clk(void)
if (cpu_is_exynos4())
exynos4_set_mipi_clk();
}
+
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq)
+{
+
+ if (cpu_is_exynos5())
+ return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq);
+ else
+ return 0;
+}
+
+void set_i2s_clk_source(void)
+{
+ if (cpu_is_exynos5())
+ exynos5_set_i2s_clk_source();
+}
+
+int set_epll_clk(unsigned long rate)
+{
+ if (cpu_is_exynos5())
+ return exynos5_set_epll_clk(rate);
+ else
+ return 0;
+}
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index 5529025..2bf2c10 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -38,5 +38,8 @@ void set_mmc_clk(int dev_index, unsigned int div);
unsigned long get_lcd_clk(void);
void set_lcd_clk(void);
void set_mipi_clk(void);
+void set_i2s_clk_source(void);
+int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq);
+int set_epll_clk(unsigned long rate);
#endif
diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h
index fce38ef..ff6781a 100644
--- a/arch/arm/include/asm/arch-exynos/clock.h
+++ b/arch/arm/include/asm/arch-exynos/clock.h
@@ -595,9 +595,38 @@ struct exynos5_clock {
unsigned int pll_div2_sel;
unsigned char res123[0xf5d8];
};
+
+/* structure for epll configuration used in audio clock configuration */
+struct set_epll_con_val {
+ unsigned int freq_out; /* frequency out */
+ unsigned int en_lock_det; /* enable lock detect */
+ unsigned int m_div; /* m divider value */
+ unsigned int p_div; /* p divider value */
+ unsigned int s_div; /* s divider value */
+ unsigned int k_dsm; /* k value of delta signal modulator */
+};
#endif
#define MPLL_FOUT_SEL_SHIFT 4
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/
+#define TIMEOUT_EPLL_LOCK 1000
+
+#define AUDIO_0_RATIO_MASK 0x0f
+#define AUDIO_1_RATIO_MASK 0x0f
+
+#define AUDIO1_SEL_MASK 0xf
+#define CLK_SRC_SCLK_EPLL 0x7
+
+/* CON0 bit-fields */
+#define EPLL_CON0_MDIV_MASK 0x1ff
+#define EPLL_CON0_PDIV_MASK 0x3f
+#define EPLL_CON0_SDIV_MASK 0x7
+#define EPLL_CON0_MDIV_SHIFT 16
+#define EPLL_CON0_PDIV_SHIFT 8
+#define EPLL_CON0_SDIV_SHIFT 0
+#define EPLL_CON0_LOCK_DET_EN_SHIFT 28
+#define EPLL_CON0_LOCK_DET_EN_MASK 1
+
#define MPLL_FOUT_SEL_MASK 0x1
#define BPLL_FOUT_SEL_SHIFT 0
#define BPLL_FOUT_SEL_MASK 0x1
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 9/9 V4] SMDK5250: Enable Sound
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (7 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 8/9 V4] EXYNOS: Add clock for I2S Rajeshwari Shinde
@ 2012-10-26 5:49 ` Rajeshwari Shinde
2012-10-26 16:20 ` [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Simon Glass
2012-11-02 9:02 ` Minkyu Kang
10 siblings, 0 replies; 12+ messages in thread
From: Rajeshwari Shinde @ 2012-10-26 5:49 UTC (permalink / raw)
To: u-boot
This patch enables sound support for EXYNOS5
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- corrected the commit message.
Changes in V3:
- None.
Changes in V4:
- None.
include/configs/smdk5250.h | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 91da167..4cb43b5 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -218,6 +218,14 @@
#define CONFIG_MENU
#endif
+/* Sound */
+#define CONFIG_CMD_SOUND
+#ifdef CONFIG_CMD_SOUND
+#define CONFIG_SOUND
+#define CONFIG_I2S
+#define CONFIG_SOUND_WM8994
+#endif
+
/* Enable devicetree support */
#define CONFIG_OF_LIBFDT
--
1.7.4.4
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (8 preceding siblings ...)
2012-10-26 5:49 ` [U-Boot] [PATCH 9/9 V4] SMDK5250: Enable Sound Rajeshwari Shinde
@ 2012-10-26 16:20 ` Simon Glass
2012-11-02 9:02 ` Minkyu Kang
10 siblings, 0 replies; 12+ messages in thread
From: Simon Glass @ 2012-10-26 16:20 UTC (permalink / raw)
To: u-boot
Hi Rajeshwari,
On Thu, Oct 25, 2012 at 10:49 PM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patchset adds the audio support for EXYNOS5.
> This patchset plays a predefined beep sound.
>
This all looks good to me. You already have my ACKs for each patch.
Regards,
Simon
> Rajeshwari Shinde (9):
> SOUND: SAMSUNG: Add I2S driver
> SOUND: Add WM8994 codec
> Sound: Add command for audio playback
> EXYNOS: Add I2S registers
> EXYNOS: Add parameters required by I2S
> EXYNOS: Add pinmux for I2S
> EXYNOS: Add I2S base address
> EXYNOS: Add clock for I2S
> SMDK5250: Enable Sound
>
> Changes in V2:
> - renamed i2s.c to samsung-i2s.c.
> - made exynos_i2s_config pinmux function static.
> - corrected the commit message for "Enable sound" patch.
> Changes in V3:
> - Incorporated comments from Simon Glass and Minkyu Kang.
> Changes in V4:
> - Corrected the coding style issues suggested by Simon Glass.
> Makefile | 1 +
> arch/arm/cpu/armv7/exynos/clock.c | 120 ++++
> arch/arm/cpu/armv7/exynos/pinmux.c | 13 +
> arch/arm/include/asm/arch-exynos/clk.h | 3 +
> arch/arm/include/asm/arch-exynos/clock.h | 29 +
> arch/arm/include/asm/arch-exynos/cpu.h | 3 +
> arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 +++
> arch/arm/include/asm/arch-exynos/periph.h | 1 +
> arch/arm/include/asm/arch-exynos/sound.h | 44 ++
> common/Makefile | 1 +
> common/cmd_sound.c | 96 ++++
> drivers/sound/Makefile | 48 ++
> drivers/sound/samsung-i2s.c | 358 ++++++++++++
> drivers/sound/sound.c | 228 ++++++++
> drivers/sound/wm8994.c | 792 +++++++++++++++++++++++++++
> drivers/sound/wm8994.h | 87 +++
> drivers/sound/wm8994_registers.h | 299 ++++++++++
> include/configs/smdk5250.h | 8 +
> include/i2s.h | 127 +++++
> include/sound.h | 62 +++
> 20 files changed, 2386 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h
> create mode 100644 arch/arm/include/asm/arch-exynos/sound.h
> create mode 100644 common/cmd_sound.c
> create mode 100644 drivers/sound/Makefile
> create mode 100644 drivers/sound/samsung-i2s.c
> create mode 100644 drivers/sound/sound.c
> create mode 100644 drivers/sound/wm8994.c
> create mode 100644 drivers/sound/wm8994.h
> create mode 100644 drivers/sound/wm8994_registers.h
> create mode 100644 include/i2s.h
> create mode 100644 include/sound.h
>
> --
> 1.7.4.4
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
` (9 preceding siblings ...)
2012-10-26 16:20 ` [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Simon Glass
@ 2012-11-02 9:02 ` Minkyu Kang
10 siblings, 0 replies; 12+ messages in thread
From: Minkyu Kang @ 2012-11-02 9:02 UTC (permalink / raw)
To: u-boot
On 26/10/12 14:49, Rajeshwari Shinde wrote:
> This patchset adds the audio support for EXYNOS5.
> This patchset plays a predefined beep sound.
>
> Rajeshwari Shinde (9):
> SOUND: SAMSUNG: Add I2S driver
> SOUND: Add WM8994 codec
> Sound: Add command for audio playback
> EXYNOS: Add I2S registers
> EXYNOS: Add parameters required by I2S
> EXYNOS: Add pinmux for I2S
> EXYNOS: Add I2S base address
> EXYNOS: Add clock for I2S
> SMDK5250: Enable Sound
>
> Changes in V2:
> - renamed i2s.c to samsung-i2s.c.
> - made exynos_i2s_config pinmux function static.
> - corrected the commit message for "Enable sound" patch.
> Changes in V3:
> - Incorporated comments from Simon Glass and Minkyu Kang.
> Changes in V4:
> - Corrected the coding style issues suggested by Simon Glass.
> Makefile | 1 +
> arch/arm/cpu/armv7/exynos/clock.c | 120 ++++
> arch/arm/cpu/armv7/exynos/pinmux.c | 13 +
> arch/arm/include/asm/arch-exynos/clk.h | 3 +
> arch/arm/include/asm/arch-exynos/clock.h | 29 +
> arch/arm/include/asm/arch-exynos/cpu.h | 3 +
> arch/arm/include/asm/arch-exynos/i2s-regs.h | 66 +++
> arch/arm/include/asm/arch-exynos/periph.h | 1 +
> arch/arm/include/asm/arch-exynos/sound.h | 44 ++
> common/Makefile | 1 +
> common/cmd_sound.c | 96 ++++
> drivers/sound/Makefile | 48 ++
> drivers/sound/samsung-i2s.c | 358 ++++++++++++
> drivers/sound/sound.c | 228 ++++++++
> drivers/sound/wm8994.c | 792 +++++++++++++++++++++++++++
> drivers/sound/wm8994.h | 87 +++
> drivers/sound/wm8994_registers.h | 299 ++++++++++
> include/configs/smdk5250.h | 8 +
> include/i2s.h | 127 +++++
> include/sound.h | 62 +++
> 20 files changed, 2386 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-exynos/i2s-regs.h
> create mode 100644 arch/arm/include/asm/arch-exynos/sound.h
> create mode 100644 common/cmd_sound.c
> create mode 100644 drivers/sound/Makefile
> create mode 100644 drivers/sound/samsung-i2s.c
> create mode 100644 drivers/sound/sound.c
> create mode 100644 drivers/sound/wm8994.c
> create mode 100644 drivers/sound/wm8994.h
> create mode 100644 drivers/sound/wm8994_registers.h
> create mode 100644 include/i2s.h
> create mode 100644 include/sound.h
>
applied to u-boot-samsung.
Thanks.
Minkyu Kang.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2012-11-02 9:02 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-10-26 5:49 [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 1/9 V4] SOUND: SAMSUNG: Add I2S driver Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 2/9 V4] SOUND: Add WM8994 codec Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 3/9 V4] Sound: Add command for audio playback Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 4/9 V4] EXYNOS: Add I2S registers Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 5/9 V4] EXYNOS: Add parameters required by I2S Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 6/9 V4] EXYNOS: Add pinmux for I2S Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 7/9 V4] EXYNOS: Add I2S base address Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 8/9 V4] EXYNOS: Add clock for I2S Rajeshwari Shinde
2012-10-26 5:49 ` [U-Boot] [PATCH 9/9 V4] SMDK5250: Enable Sound Rajeshwari Shinde
2012-10-26 16:20 ` [U-Boot] [PATCH 0/9 V4] EXYNOS5: Add Audio support Simon Glass
2012-11-02 9:02 ` Minkyu Kang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.