* RE: [yocto] [meta-zephyr][PATCH] meta-zephyr-bsp: Add autogenerated machines.
2022-01-11 0:07 ` [yocto] [meta-zephyr][PATCH] meta-zephyr-bsp: Add autogenerated machines Jon Mason
@ 2022-01-11 2:03 ` Saini, Naveen Kumar
0 siblings, 0 replies; 2+ messages in thread
From: Saini, Naveen Kumar @ 2022-01-11 2:03 UTC (permalink / raw)
To: Jon Mason, Eilís Ní Fhlannagáin
Cc: yocto, Eilís Ní Fhlannagáin
Hi Eilis,
Please generate patches with subject-prefix 'PATCH v3' after handling @Jon Mason comments !
Regards,
Naveen
> -----Original Message-----
> From: yocto@lists.yoctoproject.org <yocto@lists.yoctoproject.org> On
> Behalf Of Jon Mason
> Sent: Tuesday, January 11, 2022 8:07 AM
> To: Eilís Ní Fhlannagáin <pidge@pidge.org>
> Cc: yocto@lists.yoctoproject.org; Saini, Naveen Kumar
> <naveen.kumar.saini@intel.com>; Eilís Ní Fhlannagáin
> <elizabeth.flanagan@huawei.com>
> Subject: Re: [yocto] [meta-zephyr][PATCH] meta-zephyr-bsp: Add
> autogenerated machines.
>
> On Mon, Jan 10, 2022 at 1:16 PM Eilís Ní Fhlannagáin <pidge@pidge.org>
> wrote:
> >
> > From: Eilís Ní Fhlannagáin <elizabeth.flanagan@huawei.com>
> >
> > This commit adds 382 autogenerated machines generated via
> > generate-zephyr-machines.bb. These machines have obviously not all
> been
> > tested due to hardware access, but should work out of box.
> >
> > Signed-off-by: Eilís Ní Fhlannagáin <elizabeth.flanagan@huawei.com>
> > ---
> > .../conf/machine/96b-aerocore2.conf | 22 +++++++++++++++++++
> > .../conf/machine/96b-argonkey.conf | 22 +++++++++++++++++++
> > .../conf/machine/96b-carbon-nrf51.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/96b-carbon.conf | 22
> +++++++++++++++++++
> > .../conf/machine/96b-meerkat96.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/96b-neonkey.conf | 22
> +++++++++++++++++++
> > .../conf/machine/96b-stm32-sensor-mez.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/96b-wistrio.conf | 22
> +++++++++++++++++++
> > .../conf/machine/acrn-ehl-crb.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/acrn.conf | 22
> +++++++++++++++++++
> > .../conf/machine/actinius-icarus-bee-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/actinius-icarus-bee.conf | 22 +++++++++++++++++++
> > .../conf/machine/actinius-icarus-ns.conf | 22 +++++++++++++++++++
> > .../conf/machine/actinius-icarus-som-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/actinius-icarus-som.conf | 22 +++++++++++++++++++
> > .../conf/machine/actinius-icarus.conf | 22 +++++++++++++++++++
> > .../adafruit-feather-m0-basic-proto.conf | 22 +++++++++++++++++++
> > .../machine/adafruit-feather-nrf52840.conf | 22 +++++++++++++++++++
> > .../machine/adafruit-feather-stm32f405.conf | 22
> +++++++++++++++++++
> > .../adafruit-itsybitsy-m4-express.conf | 22 +++++++++++++++++++
> > .../conf/machine/adafruit-trinket-m0.conf | 22 +++++++++++++++++++
> > .../conf/machine/adp-xc7k-ae350.conf | 22 +++++++++++++++++++
> > .../conf/machine/altera-max10.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/arduino-due.conf | 22
> +++++++++++++++++++
> > .../conf/machine/arduino-nano-33-iot.conf | 22
> +++++++++++++++++++
> > .../conf/machine/arduino-zero.conf | 22 +++++++++++++++++++
> > .../machine/arty-a7-arm-designstart-m1.conf | 22
> +++++++++++++++++++
> > .../machine/arty-a7-arm-designstart-m3.conf | 22
> +++++++++++++++++++
> > .../conf/machine/atsamd20-xpro.conf | 22 +++++++++++++++++++
> > .../conf/machine/atsamd21-xpro.conf | 22 +++++++++++++++++++
> > .../conf/machine/atsame54-xpro.conf | 22 +++++++++++++++++++
> > .../conf/machine/atsamr21-xpro.conf | 22 +++++++++++++++++++
> > .../conf/machine/b-l072z-lrwan1.conf | 22 +++++++++++++++++++
> > .../conf/machine/b-l4s5i-iot01a.conf | 22 +++++++++++++++++++
> > .../conf/machine/b-u585i-iot02a.conf | 22 +++++++++++++++++++
> > .../conf/machine/bbc-microbit-v2.conf | 22 +++++++++++++++++++
> > .../conf/machine/bbc-microbit.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bcm958401m2.conf | 22
> +++++++++++++++++++
> > .../conf/machine/bcm958402m2-a72.conf | 22
> +++++++++++++++++++
> > .../conf/machine/bcm958402m2-m7.conf | 22
> +++++++++++++++++++
> > .../machine/beaglev-starlight-jh7100.conf | 22 +++++++++++++++++++
> > .../conf/machine/bl5340-dvk-cpuapp-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/bl5340-dvk-cpuapp.conf | 22 +++++++++++++++++++
> > .../conf/machine/bl5340-dvk-cpunet.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bl652-dvk.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bl653-dvk.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bl654-dvk.conf | 22
> +++++++++++++++++++
> > .../conf/machine/bl654-sensor-board.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bl654-usb.conf | 22
> +++++++++++++++++++
> > .../conf/machine/black-f407ve.conf | 22 +++++++++++++++++++
> > .../conf/machine/black-f407zg-pro.conf | 22 +++++++++++++++++++
> > .../conf/machine/blackpill-f401ce.conf | 22 +++++++++++++++++++
> > .../conf/machine/blackpill-f411ce.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bt510.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/bt610.conf | 22
> +++++++++++++++++++
> > .../conf/machine/cc1352r-sensortag.conf | 22 +++++++++++++++++++
> > .../conf/machine/cc1352r1-launchxl.conf | 22 +++++++++++++++++++
> > .../conf/machine/cc26x2r1-launchxl.conf | 22 +++++++++++++++++++
> > .../conf/machine/cc3220sf-launchxl.conf | 22 +++++++++++++++++++
> > .../conf/machine/cc3235sf-launchxl.conf | 22 +++++++++++++++++++
> > .../circuitdojo-feather-nrf9160-ns.conf | 22 +++++++++++++++++++
> > .../machine/circuitdojo-feather-nrf9160.conf | 22
> +++++++++++++++++++
> > .../conf/machine/colibri-imx7d-m4.conf | 22 +++++++++++++++++++
> > .../machine/contextualelectronics-abc.conf | 22 +++++++++++++++++++
> > .../conf/machine/cy8ckit-062-ble-m0.conf | 22 +++++++++++++++++++
> > .../conf/machine/cy8ckit-062-ble-m4.conf | 22 +++++++++++++++++++
> > .../conf/machine/cy8ckit-062-wifi-bt-m0.conf | 22
> +++++++++++++++++++
> > .../conf/machine/cy8ckit-062-wifi-bt-m4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/decawave-dwm1001-dev.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/degu-evk.conf | 22
> +++++++++++++++++++
> > .../conf/machine/disco-l475-iot1.conf | 22 +++++++++++++++++++
> > .../conf/machine/dragino-lsn50.conf | 22 +++++++++++++++++++
> > .../conf/machine/dragino-nbsn95.conf | 22 +++++++++++++++++++
> > .../conf/machine/efm32gg-slwstk6121a.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efm32gg-stk3701a.conf | 22 +++++++++++++++++++
> > .../conf/machine/efm32hg-slstk3400a.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efm32pg-stk3401a.conf | 22 +++++++++++++++++++
> > .../conf/machine/efm32pg-stk3402a-jg.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efm32pg-stk3402a.conf | 22 +++++++++++++++++++
> > .../conf/machine/efm32wg-stk3800.conf | 22 +++++++++++++++++++
> > .../conf/machine/efr32-radio-brd4104a.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efr32-radio-brd4180a.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efr32-radio-brd4250b.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efr32-radio-brd4255a.conf | 22
> +++++++++++++++++++
> > .../conf/machine/efr32mg-sltb004a.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/ehl-crb.conf | 22
> +++++++++++++++++++
> > .../conf/machine/em-starterkit-em11d.conf | 22
> +++++++++++++++++++
> > .../conf/machine/em-starterkit-em7d-v22.conf | 22
> +++++++++++++++++++
> > .../conf/machine/em-starterkit-em7d.conf | 22
> +++++++++++++++++++
> > .../conf/machine/em-starterkit.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/emsdp-em4.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/emsdp-em5d.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/emsdp-em6.conf | 22
> +++++++++++++++++++
> > .../conf/machine/emsdp-em7d-esp.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/emsdp-em7d.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/emsdp-em9d.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/emsdp.conf | 22
> +++++++++++++++++++
> > .../conf/machine/esp32c3-devkitm.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/faze.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/frdm-k22f.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/frdm-k64f.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/frdm-k82f.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/frdm-kl25z.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/frdm-kw41z.conf | 22
> +++++++++++++++++++
> > .../conf/machine/fvp-base-revc-2xaemv8a.conf | 22
> +++++++++++++++++++
> > .../conf/machine/fvp-baser-aemv8r-smp.conf | 22
> +++++++++++++++++++
> > .../conf/machine/fvp-baser-aemv8r.conf | 22 +++++++++++++++++++
> > .../conf/machine/google-kukui.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/gr716a-mini.conf | 22
> +++++++++++++++++++
> > .../conf/machine/hexiwear-k64.conf | 22 +++++++++++++++++++
> > .../conf/machine/hexiwear-kw40z.conf | 22 +++++++++++++++++++
> > .../conf/machine/hifive-unleashed.conf | 22 +++++++++++++++++++
> > .../conf/machine/hifive-unmatched.conf | 22 +++++++++++++++++++
> > .../conf/machine/hifive1-revb.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/hifive1.conf | 22
> +++++++++++++++++++
> > .../conf/machine/holyiot-yj16019.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/hsdk-2cores.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/hsdk.conf | 22
> +++++++++++++++++++
> > .../conf/machine/intel-adsp-cavs15.conf | 22 +++++++++++++++++++
> > .../conf/machine/intel-adsp-cavs18.conf | 22 +++++++++++++++++++
> > .../conf/machine/intel-adsp-cavs20.conf | 22 +++++++++++++++++++
> > .../conf/machine/intel-adsp-cavs25.conf | 22 +++++++++++++++++++
> > .../conf/machine/intel-s1000-crb.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/iotdk.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/ip-k66f.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/legend.conf | 22
> +++++++++++++++++++
> > .../conf/machine/litex-vexriscv.conf | 22 +++++++++++++++++++
> > .../conf/machine/lora-e5-dev-board.conf | 22 +++++++++++++++++++
> > .../conf/machine/lpcxpresso11u68.conf | 22 +++++++++++++++++++
> > .../conf/machine/lpcxpresso54114-m0.conf | 22
> +++++++++++++++++++
> > .../conf/machine/lpcxpresso54114-m4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/lpcxpresso55s16.conf | 22 +++++++++++++++++++
> > .../conf/machine/lpcxpresso55s28.conf | 22 +++++++++++++++++++
> > .../conf/machine/lpcxpresso55s69-cpu0.conf | 22
> +++++++++++++++++++
> > .../conf/machine/lpcxpresso55s69-cpu1.conf | 22
> +++++++++++++++++++
> > .../conf/machine/lpcxpresso55s69-ns.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/m2gl025-miv.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mec1501modular-assy6885.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mec15xxevb-assy6853.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mec172xevb-assy6906.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mec2016evb-assy6797.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mercury-xu.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mikroe-clicker-2.conf | 22 +++++++++++++++++++
> > .../machine/mikroe-mini-m4-for-stm32.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mimxrt1010-evk.conf | 22 +++++++++++++++++++
> > .../conf/machine/mimxrt1015-evk.conf | 22 +++++++++++++++++++
> > .../conf/machine/mimxrt1020-evk.conf | 22 +++++++++++++++++++
> > .../conf/machine/mimxrt1024-evk.conf | 22 +++++++++++++++++++
> > .../conf/machine/mimxrt1050-evk-qspi.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mimxrt1050-evk.conf | 22 +++++++++++++++++++
> > .../machine/mimxrt1060-evk-hyperflash.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mimxrt1060-evk.conf | 22 +++++++++++++++++++
> > .../conf/machine/mimxrt1064-evk.conf | 22 +++++++++++++++++++
> > .../conf/machine/mimxrt1170-evk-cm4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mimxrt1170-evk-cm7.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mimxrt685-evk-cm33.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mm-feather.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mm-swiftio.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mps2-an385.conf | 22
> +++++++++++++++++++
> > .../conf/machine/mps2-an521-ns.conf | 22 +++++++++++++++++++
> > .../conf/machine/mps2-an521-remote.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mps2-an521.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/mps3-an547.conf | 22
> +++++++++++++++++++
> > .../machine/msp-exp432p401r-launchxl.conf | 22
> +++++++++++++++++++
> > .../conf/machine/native-posix-64.conf | 22 +++++++++++++++++++
> > .../conf/machine/native-posix.conf | 22 +++++++++++++++++++
> > .../conf/machine/npcx7m6fb-evb.conf | 22 +++++++++++++++++++
> > .../conf/machine/npcx9m6f-evb.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf21540dk-nrf52840.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf51-ble400.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf51-blenano.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf51-vbluno51.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf51dk-nrf51422.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf51dongle-nrf51422.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf52-adafruit-feather.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf52-blenano2.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52-sparkfun.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52-vbluno52.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52832-mdk.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52833dk-nrf52820.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf52833dk-nrf52833.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf52840-blip.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52840-mdk.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52840-papyr.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52840dk-nrf52811.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf52840dongle-nrf52840.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf52dk-nrf52805.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52dk-nrf52810.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf52dk-nrf52832.conf | 22 +++++++++++++++++++
> > .../machine/nrf5340dk-nrf5340-cpuapp-ns.conf | 22
> +++++++++++++++++++
> > .../machine/nrf5340dk-nrf5340-cpuapp.conf | 22
> +++++++++++++++++++
> > .../machine/nrf5340dk-nrf5340-cpunet.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf9160-innblue21-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf9160-innblue21.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf9160-innblue22-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf9160-innblue22.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf9160dk-nrf52840.conf | 22 +++++++++++++++++++
> > .../conf/machine/nrf9160dk-nrf9160-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nrf9160dk-nrf9160.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/nsim-em.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nsim-em7d-v22.conf | 22 +++++++++++++++++++
> > .../conf/machine/nsim-hs-mpuv6.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/nsim-hs.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nsim-hs6x-smp.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/nsim-hs6x.conf | 22
> +++++++++++++++++++
> > .../machine/nsim-sem-mpu-stack-guard.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/nsim-sem.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nucleo-f030r8.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f031k6.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f070rb.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f091rc.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f103rb.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f207zg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f302r8.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f303k8.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f303re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f334r8.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f401re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f410rb.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f411re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f412zg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f413zh.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f429zi.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f446re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f746zg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f756zg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-f767zi.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-g071rb.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-g0b1re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-g431rb.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-g474re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-h723zg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-h743zi.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-h745zi-q-m4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nucleo-h745zi-q-m7.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nucleo-h753zi.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l011k4.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l031k6.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l053r8.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l073rz.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l152re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l412rb-p.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l432kc.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l433rc-p.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l452re-p.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l452re.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l476rg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l496zg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l4r5zi.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l552ze-q-ns.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-l552ze-q.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-u575zi-q.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-wb55rg.conf | 22 +++++++++++++++++++
> > .../conf/machine/nucleo-wl55jc.conf | 22 +++++++++++++++++++
> > .../conf/machine/nuvoton-pfm-m487.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nxp-adsp-imx8.conf | 22 +++++++++++++++++++
> > .../machine/nxp-ls1046ardb-smp-2cores.conf | 22
> +++++++++++++++++++
> > .../machine/nxp-ls1046ardb-smp-4cores.conf | 22
> +++++++++++++++++++
> > .../conf/machine/nxp-ls1046ardb.conf | 22 +++++++++++++++++++
> > .../conf/machine/olimex-stm32-e407.conf | 22
> +++++++++++++++++++
> > .../conf/machine/olimex-stm32-h103.conf | 22
> +++++++++++++++++++
> > .../conf/machine/olimex-stm32-h407.conf | 22
> +++++++++++++++++++
> > .../conf/machine/olimex-stm32-p405.conf | 22
> +++++++++++++++++++
> > .../conf/machine/olimexino-stm32.conf | 22 +++++++++++++++++++
> > .../conf/machine/particle-argon.conf | 22 +++++++++++++++++++
> > .../conf/machine/particle-boron.conf | 22 +++++++++++++++++++
> > .../conf/machine/particle-xenon.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/pico-pi-m4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/pinetime-devkit0.conf | 22 +++++++++++++++++++
> > .../conf/machine/pinnacle-100-dvk.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/qemu-arc-em.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-arc-hs6x.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-cortex-a53-smp.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-cortex-a53-xip.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-cortex-a53.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-cortex-m0.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-cortex-r5.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/qemu-leon3.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-riscv32-xip.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-riscv32.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-riscv64.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-x86-64-nokpti.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/qemu-x86-64.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-x86-lakemont.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-x86-nokpti.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-x86-nommu.conf | 22
> +++++++++++++++++++
> > .../conf/machine/qemu-x86-nopae.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-x86-tiny.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-x86-virt.conf | 22 +++++++++++++++++++
> > .../conf/machine/qemu-x86-xip.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/qemu-xtensa.conf | 22
> +++++++++++++++++++
> > .../conf/machine/quick-feather.conf | 22 +++++++++++++++++++
> > .../conf/machine/rak4631-nrf52840.conf | 22 +++++++++++++++++++
> > .../conf/machine/rak5010-nrf52840.conf | 22 +++++++++++++++++++
> > .../conf/machine/rcar-h3ulcb-cr7.conf | 22 +++++++++++++++++++
> > .../conf/machine/reel-board-v2.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/reel-board.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ronoth-lodev.conf | 22 +++++++++++++++++++
> > .../conf/machine/ruuvi-ruuvitag.conf | 22 +++++++++++++++++++
> > .../conf/machine/rv32m1-vega-ri5cy.conf | 22 +++++++++++++++++++
> > .../conf/machine/rv32m1-vega-zero-riscy.conf | 22
> +++++++++++++++++++
> > .../conf/machine/sam-e70-xplained.conf | 22 +++++++++++++++++++
> > .../conf/machine/sam-e70b-xplained.conf | 22
> +++++++++++++++++++
> > .../conf/machine/sam-v71-xult.conf | 22 +++++++++++++++++++
> > .../conf/machine/sam-v71b-xult.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/sam4e-xpro.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/sam4l-ek.conf | 22
> +++++++++++++++++++
> > .../conf/machine/sam4s-xplained.conf | 22 +++++++++++++++++++
> > .../conf/machine/seeeduino-xiao.conf | 22 +++++++++++++++++++
> > .../conf/machine/segger-trb-stm32f407.conf | 22
> +++++++++++++++++++
> > .../conf/machine/sensortile-box.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/serpente.conf | 22
> +++++++++++++++++++
> > .../sparkfun-thing-plus-nrf9160-ns.conf | 22 +++++++++++++++++++
> > .../machine/sparkfun-thing-plus-nrf9160.conf | 22
> +++++++++++++++++++
> > .../conf/machine/steval-fcu001v1.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32-min-dev-black.conf | 22
> +++++++++++++++++++
> > .../conf/machine/stm32-min-dev-blue.conf | 22
> +++++++++++++++++++
> > .../conf/machine/stm3210c-eval.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32373c-eval.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f0-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f030-demo.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f072-eval.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f072b-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f103-mini.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f3-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f4-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f411e-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f412g-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f429i-disc1.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f469i-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f723e-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f746g-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32f769i-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32g0316-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32g071b-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32h735g-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32h747i-disco-m4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/stm32h747i-disco-m7.conf | 22
> +++++++++++++++++++
> > .../conf/machine/stm32l1-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32l476g-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32l496g-disco.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32l562e-dk-ns.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32l562e-dk.conf | 22 +++++++++++++++++++
> > .../conf/machine/stm32vl-disco.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/teensy40.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/teensy41.conf | 22
> +++++++++++++++++++
> > .../conf/machine/thingy52-nrf52832.conf | 22 +++++++++++++++++++
> > .../machine/thingy53-nrf5340-cpuapp-ns.conf | 22
> +++++++++++++++++++
> > .../conf/machine/thingy53-nrf5340-cpuapp.conf | 22
> +++++++++++++++++++
> > .../conf/machine/thingy53-nrf5340-cpunet.conf | 22
> +++++++++++++++++++
> > .../conf/machine/tlsr9518adk80d.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/twr-ke18f.conf | 22
> +++++++++++++++++++
> > .../conf/machine/twr-kv58f220m.conf | 22 +++++++++++++++++++
> > .../conf/machine/ubx-bmd300eval-nrf52832.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-bmd330eval-nrf52810.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-bmd340eval-nrf52840.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-bmd345eval-nrf52840.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-bmd360eval-nrf52811.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-bmd380eval-nrf52840.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-evkannab1-nrf52832.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-evkninab1-nrf52832.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-evkninab3-nrf52840.conf | 22
> +++++++++++++++++++
> > .../conf/machine/ubx-evkninab4-nrf52833.conf | 22
> +++++++++++++++++++
> > .../conf/machine/udoo-neo-full-m4.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/up-squared.conf | 22
> +++++++++++++++++++
> > .../conf/machine/usb-kw24d512.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/v2m-beetle.conf | 22
> +++++++++++++++++++
> > .../conf/machine/v2m-musca-b1-ns.conf | 22 +++++++++++++++++++
> > .../conf/machine/v2m-musca-b1.conf | 22 +++++++++++++++++++
> > .../conf/machine/v2m-musca-s1-ns.conf | 22 +++++++++++++++++++
> > .../conf/machine/v2m-musca-s1.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/warp7-m4.conf | 22
> +++++++++++++++++++
> > .../conf/machine/waveshare-open103z.conf | 22
> +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/xenvm.conf | 22
> +++++++++++++++++++
> > .../conf/machine/xmc45-relax-kit.conf | 22 +++++++++++++++++++
> > .../conf/machine/xt-sim-intel-s1000.conf | 22 +++++++++++++++++++
> > meta-zephyr-bsp/conf/machine/xt-sim.conf | 22
> +++++++++++++++++++
> > 382 files changed, 8404 insertions(+)
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-aerocore2.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-argonkey.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-carbon-
> nrf51.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-carbon.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-meerkat96.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-neonkey.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-stm32-sensor-
> mez.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/96b-wistrio.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/acrn-ehl-crb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/acrn.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-bee-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-
> bee.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-som-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus-
> som.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/actinius-icarus.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-feather-
> m0-basic-proto.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-feather-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-feather-
> stm32f405.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-
> m4-express.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/adafruit-trinket-
> m0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/adp-xc7k-ae350.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/altera-max10.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/arduino-due.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/arduino-nano-33-
> iot.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/arduino-zero.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/arty-a7-arm-
> designstart-m1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/arty-a7-arm-
> designstart-m3.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/atsamd20-xpro.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/atsamd21-xpro.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/atsame54-xpro.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/atsamr21-xpro.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/b-l072z-lrwan1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/b-u585i-iot02a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bbc-microbit-v2.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bbc-microbit.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bcm958401m2.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bcm958402m2-
> a72.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bcm958402m2-
> m7.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/beaglev-starlight-
> jh7100.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl5340-dvk-
> cpuapp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl5340-dvk-
> cpunet.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl652-dvk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl653-dvk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl654-dvk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl654-sensor-
> board.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bl654-usb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/black-f407ve.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/black-f407zg-
> pro.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/blackpill-f401ce.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/blackpill-f411ce.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bt510.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/bt610.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cc1352r-
> sensortag.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cc1352r1-
> launchxl.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cc26x2r1-
> launchxl.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cc3220sf-
> launchxl.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cc3235sf-
> launchxl.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/circuitdojo-feather-
> nrf9160-ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/circuitdojo-feather-
> nrf9160.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/colibri-imx7d-
> m4.conf
> > create mode 100755 meta-zephyr-
> bsp/conf/machine/contextualelectronics-abc.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-
> m0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-
> m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-
> m0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-
> m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/decawave-
> dwm1001-dev.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/degu-evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/disco-l475-iot1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/dragino-lsn50.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/dragino-nbsn95.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32gg-
> slwstk6121a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32gg-
> stk3701a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32hg-
> slstk3400a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32pg-
> stk3401a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-
> jg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32pg-
> stk3402a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efm32wg-
> stk3800.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio-
> brd4104a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio-
> brd4180a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio-
> brd4250b.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efr32-radio-
> brd4255a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/efr32mg-
> sltb004a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ehl-crb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit-
> em11d.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit-em7d-
> v22.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit-
> em7d.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/em-starterkit.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em5d.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em6.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em7d-
> esp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em7d.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp-em9d.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/emsdp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/esp32c3-
> devkitm.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/faze.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/frdm-k22f.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/frdm-k64f.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/frdm-k82f.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/frdm-kl25z.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/frdm-kw41z.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/fvp-base-revc-
> 2xaemv8a.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-
> smp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/fvp-baser-
> aemv8r.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/google-kukui.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/gr716a-mini.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hexiwear-k64.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hexiwear-
> kw40z.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hifive-
> unleashed.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hifive-
> unmatched.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hifive1-revb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hifive1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/holyiot-yj16019.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hsdk-2cores.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/hsdk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp-
> cavs15.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp-
> cavs18.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp-
> cavs20.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/intel-adsp-
> cavs25.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/intel-s1000-crb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/iotdk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ip-k66f.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/legend.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/litex-vexriscv.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/lora-e5-dev-
> board.conf
> > create mode 100755 meta-zephyr-
> bsp/conf/machine/lpcxpresso11u68.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso54114-
> m0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso54114-
> m4.conf
> > create mode 100755 meta-zephyr-
> bsp/conf/machine/lpcxpresso55s16.conf
> > create mode 100755 meta-zephyr-
> bsp/conf/machine/lpcxpresso55s28.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso55s69-
> cpu0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso55s69-
> cpu1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/lpcxpresso55s69-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/m2gl025-miv.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mec1501modular-
> assy6885.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mec15xxevb-
> assy6853.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mec172xevb-
> assy6906.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mec2016evb-
> assy6797.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mercury-xu.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mikroe-clicker-
> 2.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for-
> stm32.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1010-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1015-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1020-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1024-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1050-evk-
> qspi.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1050-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1060-evk-
> hyperflash.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1060-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1064-
> evk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1170-evk-
> cm4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt1170-evk-
> cm7.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mimxrt685-evk-
> cm33.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mm-feather.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mm-swiftio.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an385.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an521-ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an521-
> remote.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mps2-an521.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/mps3-an547.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/msp-exp432p401r-
> launchxl.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/native-posix-64.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/native-posix.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/npcx7m6fb-evb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/npcx9m6f-evb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf21540dk-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf51-ble400.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf51-blenano.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf51-vbluno51.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf51dk-
> nrf51422.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf51dongle-
> nrf51422.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-adafruit-
> feather.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-blenano2.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-sparkfun.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52-vbluno52.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52832-mdk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52833dk-
> nrf52820.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52833dk-
> nrf52833.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840-blip.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840-mdk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840-papyr.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840dk-
> nrf52811.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52840dongle-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52dk-
> nrf52805.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52dk-
> nrf52810.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf52dk-
> nrf52832.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-
> cpuapp-ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-
> cpuapp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-
> cpunet.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160-innblue21-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160-
> innblue21.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160-innblue22-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160-
> innblue22.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160dk-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nrf9160dk-
> nrf9160.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-em.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-em7d-v22.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs6x-smp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-hs6x.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-sem-mpu-
> stack-guard.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nsim-sem.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f030r8.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f031k6.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f070rb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f091rc.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f103rb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f207zg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f302r8.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f303k8.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f303re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f334r8.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f401re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f410rb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f411re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f412zg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f413zh.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f429zi.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f446re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f746zg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f756zg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-f767zi.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g071rb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g0b1re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g431rb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-g474re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h723zg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h743zi.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-
> m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-
> m7.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-h753zi.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l011k4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l031k6.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l053r8.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l073rz.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l152re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l412rb-p.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l432kc.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l433rc-p.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l452re-p.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l452re.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l476rg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l496zg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l4r5zi.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-l552ze-
> q.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-u575zi-
> q.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-wb55rg.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nucleo-wl55jc.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nuvoton-pfm-
> m487.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nxp-adsp-imx8.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-
> smp-2cores.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-
> smp-4cores.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/nxp-ls1046ardb.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32-
> e407.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32-
> h103.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32-
> h407.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/olimex-stm32-
> p405.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/olimexino-
> stm32.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/particle-argon.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/particle-boron.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/particle-xenon.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/pico-pi-m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/pinetime-
> devkit0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/pinnacle-100-
> dvk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-arc-em.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-arc-hs6x.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-a53-
> smp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-a53-
> xip.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-
> a53.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-
> m0.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-cortex-
> r5.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-leon3.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-riscv32-
> xip.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-riscv32.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-riscv64.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-64-
> nokpti.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-64.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-
> lakemont.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-
> nokpti.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-
> nommu.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-
> nopae.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-tiny.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-virt.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-x86-xip.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/qemu-xtensa.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/quick-feather.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/rak4631-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/rak5010-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/reel-board-v2.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/reel-board.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ronoth-lodev.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/rv32m1-vega-
> ri5cy.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-
> riscy.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam-e70-
> xplained.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam-e70b-
> xplained.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam-v71-xult.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam-v71b-xult.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam4e-xpro.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam4l-ek.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sam4s-xplained.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/seeeduino-xiao.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/segger-trb-
> stm32f407.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sensortile-box.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/serpente.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-
> nrf9160-ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-
> nrf9160.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/steval-fcu001v1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32-min-dev-
> black.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32-min-dev-
> blue.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm3210c-eval.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32373c-eval.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f0-disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f030-
> demo.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f072-eval.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f072b-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f103-mini.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f3-disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f4-disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f411e-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f412g-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f429i-
> disc1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f469i-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f723e-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f746g-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32f769i-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32g0316-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32g071b-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32h735g-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32h747i-disco-
> m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32h747i-disco-
> m7.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32l1-disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32l476g-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32l496g-
> disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32l562e-dk-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32l562e-dk.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/stm32vl-disco.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/teensy40.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/teensy41.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/thingy52-
> nrf52832.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/thingy53-nrf5340-
> cpuapp-ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/thingy53-nrf5340-
> cpuapp.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/thingy53-nrf5340-
> cpunet.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/tlsr9518adk80d.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/twr-ke18f.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/twr-kv58f220m.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd300eval-
> nrf52832.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd330eval-
> nrf52810.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd340eval-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd345eval-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd360eval-
> nrf52811.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-bmd380eval-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkannab1-
> nrf52832.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkninab1-
> nrf52832.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkninab3-
> nrf52840.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/ubx-evkninab4-
> nrf52833.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/udoo-neo-full-
> m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/up-squared.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/usb-kw24d512.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/v2m-beetle.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-b1-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-b1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-s1-
> ns.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/v2m-musca-s1.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/warp7-m4.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/waveshare-
> open103z.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/xenvm.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/xmc45-relax-kit.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/xt-sim-intel-
> s1000.conf
> > create mode 100755 meta-zephyr-bsp/conf/machine/xt-sim.conf
> >
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-aerocore2.conf b/meta-
> zephyr-bsp/conf/machine/96b-aerocore2.conf
> > new file mode 100755
> > index 0000000..6b8c958
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-aerocore2.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-aerocore2
> > +#@DESCRIPTION: Machine configuration for 96b-aerocore2 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-aerocore2 = "arm"
>
> Every instance of ARCH_ needs to be ARCH:
>
> Also, it needs a path to the tune files. In this case,
> require conf/machine/include/arm/armv7m/tune-cortexm4.inc
>
> When I correct both of those, it will compile for me (on master
> branches). I only did one to confirm, but it should be easy enough to
> script for each one.
>
> BTW, I did test building and testing the previously existing machines
> and my rudamentary gitlab ci passes.
>
> Also, for some reason these patches aren't showing up on
> https://lore.kernel.org/yocto/
> I'm guessing it's something to do with spam filters, but Halstead
> might be helpful there.
>
> Thanks,
> Jon
>
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: 96b_aerocore2
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F427xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=24000000"
> > +
> > +ZEPHYR_BOARD = "96b_aerocore2"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-argonkey.conf b/meta-
> zephyr-bsp/conf/machine/96b-argonkey.conf
> > new file mode 100755
> > index 0000000..46af448
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-argonkey.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-argonkey
> > +#@DESCRIPTION: Machine configuration for 96b-argonkey , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-argonkey = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: 96b_argonkey
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F412Cx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000"
> > +
> > +ZEPHYR_BOARD = "96b_argonkey"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-carbon-nrf51.conf b/meta-
> zephyr-bsp/conf/machine/96b-carbon-nrf51.conf
> > new file mode 100755
> > index 0000000..779cc0f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-carbon-nrf51.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-carbon-nrf51
> > +#@DESCRIPTION: Machine configuration for 96b-carbon-nrf51 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-carbon-nrf51 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: 96b_carbon_nrf51
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAC"
> > +
> > +ZEPHYR_BOARD = "96b_carbon_nrf51"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-carbon.conf b/meta-
> zephyr-bsp/conf/machine/96b-carbon.conf
> > new file mode 100755
> > index 0000000..a1a94e0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-carbon.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-carbon
> > +#@DESCRIPTION: Machine configuration for 96b-carbon , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-carbon = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: 96b_carbon
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F401xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000"
> > +
> > +ZEPHYR_BOARD = "96b_carbon"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-meerkat96.conf b/meta-
> zephyr-bsp/conf/machine/96b-meerkat96.conf
> > new file mode 100755
> > index 0000000..efe4ebb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-meerkat96.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-meerkat96
> > +#@DESCRIPTION: Machine configuration for 96b-meerkat96 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-meerkat96 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: 96b_meerkat96
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "96b_meerkat96"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-neonkey.conf b/meta-
> zephyr-bsp/conf/machine/96b-neonkey.conf
> > new file mode 100755
> > index 0000000..de86440
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-neonkey.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-neonkey
> > +#@DESCRIPTION: Machine configuration for 96b-neonkey , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-neonkey = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: 96b_neonkey
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "96b_neonkey"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-stm32-sensor-mez.conf
> b/meta-zephyr-bsp/conf/machine/96b-stm32-sensor-mez.conf
> > new file mode 100755
> > index 0000000..2bb6a13
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-stm32-sensor-mez.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-stm32-sensor-mez
> > +#@DESCRIPTION: Machine configuration for 96b-stm32-sensor-mez ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-stm32-sensor-mez = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: 96b_stm32_sensor_mez
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F446xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000"
> > +
> > +ZEPHYR_BOARD = "96b_stm32_sensor_mez"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/96b-wistrio.conf b/meta-
> zephyr-bsp/conf/machine/96b-wistrio.conf
> > new file mode 100755
> > index 0000000..fbd04cb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/96b-wistrio.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: 96b-wistrio
> > +#@DESCRIPTION: Machine configuration for 96b-wistrio , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_96b-wistrio = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: 96b_wistrio
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L151xBA -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "96b_wistrio"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/acrn-ehl-crb.conf b/meta-
> zephyr-bsp/conf/machine/acrn-ehl-crb.conf
> > new file mode 100755
> > index 0000000..4537100
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/acrn-ehl-crb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: acrn-ehl-crb
> > +#@DESCRIPTION: Machine configuration for acrn-ehl-crb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_acrn-ehl-crb = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: acrn_ehl_crb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "acrn_ehl_crb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/acrn.conf b/meta-zephyr-
> bsp/conf/machine/acrn.conf
> > new file mode 100755
> > index 0000000..7225a24
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/acrn.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: acrn
> > +#@DESCRIPTION: Machine configuration for acrn , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_acrn = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: acrn
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "acrn"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-bee-ns.conf
> b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee-ns.conf
> > new file mode 100755
> > index 0000000..6b6b5cb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: actinius-icarus-bee-ns
> > +#@DESCRIPTION: Machine configuration for actinius-icarus-bee-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_actinius-icarus-bee-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: actinius_icarus_bee_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "actinius_icarus_bee_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-bee.conf
> b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee.conf
> > new file mode 100755
> > index 0000000..1f82cd6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-bee.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: actinius-icarus-bee
> > +#@DESCRIPTION: Machine configuration for actinius-icarus-bee , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_actinius-icarus-bee = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: actinius_icarus_bee
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "actinius_icarus_bee"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-ns.conf b/meta-
> zephyr-bsp/conf/machine/actinius-icarus-ns.conf
> > new file mode 100755
> > index 0000000..a8b5ff8
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: actinius-icarus-ns
> > +#@DESCRIPTION: Machine configuration for actinius-icarus-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_actinius-icarus-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: actinius_icarus_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "actinius_icarus_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-som-ns.conf
> b/meta-zephyr-bsp/conf/machine/actinius-icarus-som-ns.conf
> > new file mode 100755
> > index 0000000..f1d50e7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-som-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: actinius-icarus-som-ns
> > +#@DESCRIPTION: Machine configuration for actinius-icarus-som-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_actinius-icarus-som-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: actinius_icarus_som_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "actinius_icarus_som_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus-som.conf
> b/meta-zephyr-bsp/conf/machine/actinius-icarus-som.conf
> > new file mode 100755
> > index 0000000..732d1aa
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus-som.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: actinius-icarus-som
> > +#@DESCRIPTION: Machine configuration for actinius-icarus-som , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_actinius-icarus-som = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: actinius_icarus_som
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "actinius_icarus_som"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/actinius-icarus.conf b/meta-
> zephyr-bsp/conf/machine/actinius-icarus.conf
> > new file mode 100755
> > index 0000000..043413c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/actinius-icarus.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: actinius-icarus
> > +#@DESCRIPTION: Machine configuration for actinius-icarus , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_actinius-icarus = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: actinius_icarus
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "actinius_icarus"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/adafruit-feather-m0-basic-
> proto.conf b/meta-zephyr-bsp/conf/machine/adafruit-feather-m0-basic-
> proto.conf
> > new file mode 100755
> > index 0000000..a4cfee5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/adafruit-feather-m0-basic-
> proto.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: adafruit-feather-m0-basic-proto
> > +#@DESCRIPTION: Machine configuration for adafruit-feather-m0-basic-
> proto , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_adafruit-feather-m0-basic-proto = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: adafruit_feather_m0_basic_proto
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "adafruit_feather_m0_basic_proto"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/adafruit-feather-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/adafruit-feather-nrf52840.conf
> > new file mode 100755
> > index 0000000..6fc13a4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/adafruit-feather-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: adafruit-feather-nrf52840
> > +#@DESCRIPTION: Machine configuration for adafruit-feather-nrf52840 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_adafruit-feather-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: adafruit_feather_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "adafruit_feather_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/adafruit-feather-
> stm32f405.conf b/meta-zephyr-bsp/conf/machine/adafruit-feather-
> stm32f405.conf
> > new file mode 100755
> > index 0000000..46f75e6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/adafruit-feather-stm32f405.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: adafruit-feather-stm32f405
> > +#@DESCRIPTION: Machine configuration for adafruit-feather-stm32f405 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_adafruit-feather-stm32f405 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: adafruit_feather_stm32f405
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F405xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000"
> > +
> > +ZEPHYR_BOARD = "adafruit_feather_stm32f405"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-m4-
> express.conf b/meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-m4-
> express.conf
> > new file mode 100755
> > index 0000000..a3f0f40
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/adafruit-itsybitsy-m4-express.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: adafruit-itsybitsy-m4-express
> > +#@DESCRIPTION: Machine configuration for adafruit-itsybitsy-m4-express
> , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_adafruit-itsybitsy-m4-express = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: adafruit_itsybitsy_m4_express
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "adafruit_itsybitsy_m4_express"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/adafruit-trinket-m0.conf
> b/meta-zephyr-bsp/conf/machine/adafruit-trinket-m0.conf
> > new file mode 100755
> > index 0000000..23a478b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/adafruit-trinket-m0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: adafruit-trinket-m0
> > +#@DESCRIPTION: Machine configuration for adafruit-trinket-m0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_adafruit-trinket-m0 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: adafruit_trinket_m0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "adafruit_trinket_m0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/adp-xc7k-ae350.conf b/meta-
> zephyr-bsp/conf/machine/adp-xc7k-ae350.conf
> > new file mode 100755
> > index 0000000..d4ae227
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/adp-xc7k-ae350.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: adp-xc7k-ae350
> > +#@DESCRIPTION: Machine configuration for adp-xc7k-ae350 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_adp-xc7k-ae350 = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: adp_xc7k_ae350
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "adp_xc7k_ae350"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/altera-max10.conf b/meta-
> zephyr-bsp/conf/machine/altera-max10.conf
> > new file mode 100755
> > index 0000000..431725d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/altera-max10.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: altera-max10
> > +#@DESCRIPTION: Machine configuration for altera-max10 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_altera-max10 = "nios2"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: nios2
> > +# BOARD: altera_max10
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -DZEPHYR_RTOS"
> > +
> > +ZEPHYR_BOARD = "altera_max10"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/arduino-due.conf b/meta-
> zephyr-bsp/conf/machine/arduino-due.conf
> > new file mode 100755
> > index 0000000..539828b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/arduino-due.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: arduino-due
> > +#@DESCRIPTION: Machine configuration for arduino-due , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_arduino-due = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: arduino_due
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "arduino_due"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/arduino-nano-33-iot.conf
> b/meta-zephyr-bsp/conf/machine/arduino-nano-33-iot.conf
> > new file mode 100755
> > index 0000000..ce77958
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/arduino-nano-33-iot.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: arduino-nano-33-iot
> > +#@DESCRIPTION: Machine configuration for arduino-nano-33-iot , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_arduino-nano-33-iot = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: arduino_nano_33_iot
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "arduino_nano_33_iot"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/arduino-zero.conf b/meta-
> zephyr-bsp/conf/machine/arduino-zero.conf
> > new file mode 100755
> > index 0000000..b11af93
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/arduino-zero.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: arduino-zero
> > +#@DESCRIPTION: Machine configuration for arduino-zero , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_arduino-zero = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: arduino_zero
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "arduino_zero"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-
> m1.conf b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m1.conf
> > new file mode 100755
> > index 0000000..f6126ac
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: arty-a7-arm-designstart-m1
> > +#@DESCRIPTION: Machine configuration for arty-a7-arm-designstart-m1 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_arty-a7-arm-designstart-m1 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm1"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m1
> > +# ARCH: arm
> > +# BOARD: arty_a7_arm_designstart_m1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "arty_a7_arm_designstart_m1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-
> m3.conf b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m3.conf
> > new file mode 100755
> > index 0000000..6c225f2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/arty-a7-arm-designstart-m3.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: arty-a7-arm-designstart-m3
> > +#@DESCRIPTION: Machine configuration for arty-a7-arm-designstart-m3 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_arty-a7-arm-designstart-m3 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: arty_a7_arm_designstart_m3
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "arty_a7_arm_designstart_m3"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/atsamd20-xpro.conf b/meta-
> zephyr-bsp/conf/machine/atsamd20-xpro.conf
> > new file mode 100755
> > index 0000000..528af6c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/atsamd20-xpro.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: atsamd20-xpro
> > +#@DESCRIPTION: Machine configuration for atsamd20-xpro , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_atsamd20-xpro = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: atsamd20_xpro
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "atsamd20_xpro"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/atsamd21-xpro.conf b/meta-
> zephyr-bsp/conf/machine/atsamd21-xpro.conf
> > new file mode 100755
> > index 0000000..129fc4d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/atsamd21-xpro.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: atsamd21-xpro
> > +#@DESCRIPTION: Machine configuration for atsamd21-xpro , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_atsamd21-xpro = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: atsamd21_xpro
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "atsamd21_xpro"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/atsame54-xpro.conf b/meta-
> zephyr-bsp/conf/machine/atsame54-xpro.conf
> > new file mode 100755
> > index 0000000..abd1076
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/atsame54-xpro.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: atsame54-xpro
> > +#@DESCRIPTION: Machine configuration for atsame54-xpro , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_atsame54-xpro = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: atsame54_xpro
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "atsame54_xpro"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/atsamr21-xpro.conf b/meta-
> zephyr-bsp/conf/machine/atsamr21-xpro.conf
> > new file mode 100755
> > index 0000000..9c408a0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/atsamr21-xpro.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: atsamr21-xpro
> > +#@DESCRIPTION: Machine configuration for atsamr21-xpro , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_atsamr21-xpro = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: atsamr21_xpro
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "atsamr21_xpro"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/b-l072z-lrwan1.conf b/meta-
> zephyr-bsp/conf/machine/b-l072z-lrwan1.conf
> > new file mode 100755
> > index 0000000..adfdfe3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/b-l072z-lrwan1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: b-l072z-lrwan1
> > +#@DESCRIPTION: Machine configuration for b-l072z-lrwan1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_b-l072z-lrwan1 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: b_l072z_lrwan1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L072xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "b_l072z_lrwan1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf b/meta-
> zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf
> > new file mode 100755
> > index 0000000..143bb90
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/b-l4s5i-iot01a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: b-l4s5i-iot01a
> > +#@DESCRIPTION: Machine configuration for b-l4s5i-iot01a , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_b-l4s5i-iot01a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: b_l4s5i_iot01a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L4S5xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "b_l4s5i_iot01a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/b-u585i-iot02a.conf b/meta-
> zephyr-bsp/conf/machine/b-u585i-iot02a.conf
> > new file mode 100755
> > index 0000000..133d15c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/b-u585i-iot02a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: b-u585i-iot02a
> > +#@DESCRIPTION: Machine configuration for b-u585i-iot02a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_b-u585i-iot02a = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: b_u585i_iot02a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32U585xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "b_u585i_iot02a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bbc-microbit-v2.conf b/meta-
> zephyr-bsp/conf/machine/bbc-microbit-v2.conf
> > new file mode 100755
> > index 0000000..62f036d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bbc-microbit-v2.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bbc-microbit-v2
> > +#@DESCRIPTION: Machine configuration for bbc-microbit-v2 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bbc-microbit-v2 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bbc_microbit_v2
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52833_XXAA"
> > +
> > +ZEPHYR_BOARD = "bbc_microbit_v2"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bbc-microbit.conf b/meta-
> zephyr-bsp/conf/machine/bbc-microbit.conf
> > new file mode 100755
> > index 0000000..43ff247
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bbc-microbit.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bbc-microbit
> > +#@DESCRIPTION: Machine configuration for bbc-microbit , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bbc-microbit = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: bbc_microbit
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAA"
> > +
> > +ZEPHYR_BOARD = "bbc_microbit"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bcm958401m2.conf b/meta-
> zephyr-bsp/conf/machine/bcm958401m2.conf
> > new file mode 100755
> > index 0000000..bbda910
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bcm958401m2.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bcm958401m2
> > +#@DESCRIPTION: Machine configuration for bcm958401m2 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bcm958401m2 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: bcm958401m2
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "bcm958401m2"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bcm958402m2-a72.conf
> b/meta-zephyr-bsp/conf/machine/bcm958402m2-a72.conf
> > new file mode 100755
> > index 0000000..5df9982
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bcm958402m2-a72.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bcm958402m2-a72
> > +#@DESCRIPTION: Machine configuration for bcm958402m2-a72 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bcm958402m2-a72 = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a72
> > +# ARCH: arm64
> > +# BOARD: bcm958402m2_a72
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "bcm958402m2_a72"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bcm958402m2-m7.conf
> b/meta-zephyr-bsp/conf/machine/bcm958402m2-m7.conf
> > new file mode 100755
> > index 0000000..29fc5d5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bcm958402m2-m7.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bcm958402m2-m7
> > +#@DESCRIPTION: Machine configuration for bcm958402m2-m7 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bcm958402m2-m7 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: bcm958402m2_m7
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "bcm958402m2_m7"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/beaglev-starlight-jh7100.conf
> b/meta-zephyr-bsp/conf/machine/beaglev-starlight-jh7100.conf
> > new file mode 100755
> > index 0000000..69109be
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/beaglev-starlight-jh7100.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: beaglev-starlight-jh7100
> > +#@DESCRIPTION: Machine configuration for beaglev-starlight-jh7100 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_beaglev-starlight-jh7100 = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: beaglev_starlight_jh7100
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "beaglev_starlight_jh7100"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-ns.conf
> b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-ns.conf
> > new file mode 100755
> > index 0000000..13e4e75
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl5340-dvk-cpuapp-ns
> > +#@DESCRIPTION: Machine configuration for bl5340-dvk-cpuapp-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl5340-dvk-cpuapp-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: bl5340_dvk_cpuapp_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_APPLICATION -
> DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "bl5340_dvk_cpuapp_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp.conf
> b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp.conf
> > new file mode 100755
> > index 0000000..d3acb11
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpuapp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl5340-dvk-cpuapp
> > +#@DESCRIPTION: Machine configuration for bl5340-dvk-cpuapp , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl5340-dvk-cpuapp = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: bl5340_dvk_cpuapp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_APPLICATION"
> > +
> > +ZEPHYR_BOARD = "bl5340_dvk_cpuapp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpunet.conf
> b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpunet.conf
> > new file mode 100755
> > index 0000000..630b1a2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl5340-dvk-cpunet.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl5340-dvk-cpunet
> > +#@DESCRIPTION: Machine configuration for bl5340-dvk-cpunet , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl5340-dvk-cpunet = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: bl5340_dvk_cpunet
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_NETWORK"
> > +
> > +ZEPHYR_BOARD = "bl5340_dvk_cpunet"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl652-dvk.conf b/meta-zephyr-
> bsp/conf/machine/bl652-dvk.conf
> > new file mode 100755
> > index 0000000..5339375
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl652-dvk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl652-dvk
> > +#@DESCRIPTION: Machine configuration for bl652-dvk , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl652-dvk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bl652_dvk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "bl652_dvk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl653-dvk.conf b/meta-zephyr-
> bsp/conf/machine/bl653-dvk.conf
> > new file mode 100755
> > index 0000000..2e52c62
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl653-dvk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl653-dvk
> > +#@DESCRIPTION: Machine configuration for bl653-dvk , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl653-dvk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bl653_dvk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52833_XXAA"
> > +
> > +ZEPHYR_BOARD = "bl653_dvk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl654-dvk.conf b/meta-zephyr-
> bsp/conf/machine/bl654-dvk.conf
> > new file mode 100755
> > index 0000000..c3a0c41
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl654-dvk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl654-dvk
> > +#@DESCRIPTION: Machine configuration for bl654-dvk , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl654-dvk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bl654_dvk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "bl654_dvk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl654-sensor-board.conf
> b/meta-zephyr-bsp/conf/machine/bl654-sensor-board.conf
> > new file mode 100755
> > index 0000000..a7272df
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl654-sensor-board.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl654-sensor-board
> > +#@DESCRIPTION: Machine configuration for bl654-sensor-board , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl654-sensor-board = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bl654_sensor_board
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "bl654_sensor_board"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bl654-usb.conf b/meta-zephyr-
> bsp/conf/machine/bl654-usb.conf
> > new file mode 100755
> > index 0000000..a90009f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bl654-usb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bl654-usb
> > +#@DESCRIPTION: Machine configuration for bl654-usb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bl654-usb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bl654_usb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "bl654_usb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/black-f407ve.conf b/meta-
> zephyr-bsp/conf/machine/black-f407ve.conf
> > new file mode 100755
> > index 0000000..bc92e6f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/black-f407ve.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: black-f407ve
> > +#@DESCRIPTION: Machine configuration for black-f407ve , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_black-f407ve = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: black_f407ve
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "black_f407ve"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/black-f407zg-pro.conf b/meta-
> zephyr-bsp/conf/machine/black-f407zg-pro.conf
> > new file mode 100755
> > index 0000000..237259e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/black-f407zg-pro.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: black-f407zg-pro
> > +#@DESCRIPTION: Machine configuration for black-f407zg-pro , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_black-f407zg-pro = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: black_f407zg_pro
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "black_f407zg_pro"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/blackpill-f401ce.conf b/meta-
> zephyr-bsp/conf/machine/blackpill-f401ce.conf
> > new file mode 100755
> > index 0000000..24f2dc5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/blackpill-f401ce.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: blackpill-f401ce
> > +#@DESCRIPTION: Machine configuration for blackpill-f401ce , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_blackpill-f401ce = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: blackpill_f401ce
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F401xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "blackpill_f401ce"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/blackpill-f411ce.conf b/meta-
> zephyr-bsp/conf/machine/blackpill-f411ce.conf
> > new file mode 100755
> > index 0000000..931f864
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/blackpill-f411ce.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: blackpill-f411ce
> > +#@DESCRIPTION: Machine configuration for blackpill-f411ce , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_blackpill-f411ce = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: blackpill_f411ce
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "blackpill_f411ce"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bt510.conf b/meta-zephyr-
> bsp/conf/machine/bt510.conf
> > new file mode 100755
> > index 0000000..0286fa2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bt510.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bt510
> > +#@DESCRIPTION: Machine configuration for bt510 , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bt510 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bt510
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "bt510"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/bt610.conf b/meta-zephyr-
> bsp/conf/machine/bt610.conf
> > new file mode 100755
> > index 0000000..1b15c2a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/bt610.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: bt610
> > +#@DESCRIPTION: Machine configuration for bt610 , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_bt610 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: bt610
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "bt610"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cc1352r-sensortag.conf
> b/meta-zephyr-bsp/conf/machine/cc1352r-sensortag.conf
> > new file mode 100755
> > index 0000000..4578414
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cc1352r-sensortag.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cc1352r-sensortag
> > +#@DESCRIPTION: Machine configuration for cc1352r-sensortag , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cc1352r-sensortag = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cc1352r_sensortag
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "cc1352r_sensortag"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cc1352r1-launchxl.conf
> b/meta-zephyr-bsp/conf/machine/cc1352r1-launchxl.conf
> > new file mode 100755
> > index 0000000..cf74fc3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cc1352r1-launchxl.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cc1352r1-launchxl
> > +#@DESCRIPTION: Machine configuration for cc1352r1-launchxl , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cc1352r1-launchxl = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cc1352r1_launchxl
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "cc1352r1_launchxl"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cc26x2r1-launchxl.conf
> b/meta-zephyr-bsp/conf/machine/cc26x2r1-launchxl.conf
> > new file mode 100755
> > index 0000000..75d16fc
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cc26x2r1-launchxl.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cc26x2r1-launchxl
> > +#@DESCRIPTION: Machine configuration for cc26x2r1-launchxl , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cc26x2r1-launchxl = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cc26x2r1_launchxl
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "cc26x2r1_launchxl"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cc3220sf-launchxl.conf b/meta-
> zephyr-bsp/conf/machine/cc3220sf-launchxl.conf
> > new file mode 100755
> > index 0000000..7b94be8
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cc3220sf-launchxl.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cc3220sf-launchxl
> > +#@DESCRIPTION: Machine configuration for cc3220sf-launchxl , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cc3220sf-launchxl = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cc3220sf_launchxl
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DUSE_CC3220_ROM_DRV_API"
> > +
> > +ZEPHYR_BOARD = "cc3220sf_launchxl"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cc3235sf-launchxl.conf b/meta-
> zephyr-bsp/conf/machine/cc3235sf-launchxl.conf
> > new file mode 100755
> > index 0000000..5266bce
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cc3235sf-launchxl.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cc3235sf-launchxl
> > +#@DESCRIPTION: Machine configuration for cc3235sf-launchxl , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cc3235sf-launchxl = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cc3235sf_launchxl
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DUSE_CC3220_ROM_DRV_API"
> > +
> > +ZEPHYR_BOARD = "cc3235sf_launchxl"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160-
> ns.conf b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160-
> ns.conf
> > new file mode 100755
> > index 0000000..8c5ab10
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160-
> ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: circuitdojo-feather-nrf9160-ns
> > +#@DESCRIPTION: Machine configuration for circuitdojo-feather-nrf9160-
> ns , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_circuitdojo-feather-nrf9160-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: circuitdojo_feather_nrf9160_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "circuitdojo_feather_nrf9160_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/circuitdojo-feather-
> nrf9160.conf b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-
> nrf9160.conf
> > new file mode 100755
> > index 0000000..965696c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/circuitdojo-feather-nrf9160.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: circuitdojo-feather-nrf9160
> > +#@DESCRIPTION: Machine configuration for circuitdojo-feather-nrf9160 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_circuitdojo-feather-nrf9160 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: circuitdojo_feather_nrf9160
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "circuitdojo_feather_nrf9160"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/colibri-imx7d-m4.conf b/meta-
> zephyr-bsp/conf/machine/colibri-imx7d-m4.conf
> > new file mode 100755
> > index 0000000..1908982
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/colibri-imx7d-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: colibri-imx7d-m4
> > +#@DESCRIPTION: Machine configuration for colibri-imx7d-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_colibri-imx7d-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: colibri_imx7d_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "colibri_imx7d_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/contextualelectronics-abc.conf
> b/meta-zephyr-bsp/conf/machine/contextualelectronics-abc.conf
> > new file mode 100755
> > index 0000000..ada8f67
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/contextualelectronics-abc.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: contextualelectronics-abc
> > +#@DESCRIPTION: Machine configuration for contextualelectronics-abc ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_contextualelectronics-abc = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: contextualelectronics_abc
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "contextualelectronics_abc"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m0.conf
> b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m0.conf
> > new file mode 100755
> > index 0000000..4fda05d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cy8ckit-062-ble-m0
> > +#@DESCRIPTION: Machine configuration for cy8ckit-062-ble-m0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cy8ckit-062-ble-m0 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: cy8ckit_062_ble_m0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCY8C6347BZI_BLD53 -D__copy_table_start__=0 -
> D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0"
> > +
> > +ZEPHYR_BOARD = "cy8ckit_062_ble_m0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m4.conf
> b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m4.conf
> > new file mode 100755
> > index 0000000..a093ac1
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-ble-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cy8ckit-062-ble-m4
> > +#@DESCRIPTION: Machine configuration for cy8ckit-062-ble-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cy8ckit-062-ble-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cy8ckit_062_ble_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCY8C6347BZI_BLD53 -D__copy_table_start__=0 -
> D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0"
> > +
> > +ZEPHYR_BOARD = "cy8ckit_062_ble_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m0.conf
> b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m0.conf
> > new file mode 100755
> > index 0000000..12be80a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cy8ckit-062-wifi-bt-m0
> > +#@DESCRIPTION: Machine configuration for cy8ckit-062-wifi-bt-m0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cy8ckit-062-wifi-bt-m0 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: cy8ckit_062_wifi_bt_m0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCY8C6247BZI_D54 -D__copy_table_start__=0 -
> D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0"
> > +
> > +ZEPHYR_BOARD = "cy8ckit_062_wifi_bt_m0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m4.conf
> b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m4.conf
> > new file mode 100755
> > index 0000000..a29e2ea
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/cy8ckit-062-wifi-bt-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: cy8ckit-062-wifi-bt-m4
> > +#@DESCRIPTION: Machine configuration for cy8ckit-062-wifi-bt-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_cy8ckit-062-wifi-bt-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: cy8ckit_062_wifi_bt_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCY8C6247BZI_D54 -D__copy_table_start__=0 -
> D__copy_table_end__=0 -D__bss_start__=0 -D__bss_end__=0"
> > +
> > +ZEPHYR_BOARD = "cy8ckit_062_wifi_bt_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/decawave-dwm1001-dev.conf
> b/meta-zephyr-bsp/conf/machine/decawave-dwm1001-dev.conf
> > new file mode 100755
> > index 0000000..70c4b65
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/decawave-dwm1001-dev.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: decawave-dwm1001-dev
> > +#@DESCRIPTION: Machine configuration for decawave-dwm1001-dev ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_decawave-dwm1001-dev = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: decawave_dwm1001_dev
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "decawave_dwm1001_dev"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/degu-evk.conf b/meta-zephyr-
> bsp/conf/machine/degu-evk.conf
> > new file mode 100755
> > index 0000000..35270de
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/degu-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: degu-evk
> > +#@DESCRIPTION: Machine configuration for degu-evk , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_degu-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: degu_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "degu_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/disco-l475-iot1.conf b/meta-
> zephyr-bsp/conf/machine/disco-l475-iot1.conf
> > new file mode 100755
> > index 0000000..e356da7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/disco-l475-iot1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: disco-l475-iot1
> > +#@DESCRIPTION: Machine configuration for disco-l475-iot1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_disco-l475-iot1 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: disco_l475_iot1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L475xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "disco_l475_iot1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/dragino-lsn50.conf b/meta-
> zephyr-bsp/conf/machine/dragino-lsn50.conf
> > new file mode 100755
> > index 0000000..0554a7e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/dragino-lsn50.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: dragino-lsn50
> > +#@DESCRIPTION: Machine configuration for dragino-lsn50 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_dragino-lsn50 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: dragino_lsn50
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L072xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "dragino_lsn50"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/dragino-nbsn95.conf b/meta-
> zephyr-bsp/conf/machine/dragino-nbsn95.conf
> > new file mode 100755
> > index 0000000..d46d091
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/dragino-nbsn95.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: dragino-nbsn95
> > +#@DESCRIPTION: Machine configuration for dragino-nbsn95 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_dragino-nbsn95 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: dragino_nbsn95
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L072xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "dragino_nbsn95"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32gg-slwstk6121a.conf
> b/meta-zephyr-bsp/conf/machine/efm32gg-slwstk6121a.conf
> > new file mode 100755
> > index 0000000..0f796c5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32gg-slwstk6121a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32gg-slwstk6121a
> > +#@DESCRIPTION: Machine configuration for efm32gg-slwstk6121a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32gg-slwstk6121a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efm32gg_slwstk6121a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32GG11B820F2048GM64"
> > +
> > +ZEPHYR_BOARD = "efm32gg_slwstk6121a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32gg-stk3701a.conf
> b/meta-zephyr-bsp/conf/machine/efm32gg-stk3701a.conf
> > new file mode 100755
> > index 0000000..f6aa296
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32gg-stk3701a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32gg-stk3701a
> > +#@DESCRIPTION: Machine configuration for efm32gg-stk3701a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32gg-stk3701a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efm32gg_stk3701a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32GG11B820F2048GL192"
> > +
> > +ZEPHYR_BOARD = "efm32gg_stk3701a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32hg-slstk3400a.conf
> b/meta-zephyr-bsp/conf/machine/efm32hg-slstk3400a.conf
> > new file mode 100755
> > index 0000000..fae6607
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32hg-slstk3400a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32hg-slstk3400a
> > +#@DESCRIPTION: Machine configuration for efm32hg-slstk3400a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32hg-slstk3400a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: efm32hg_slstk3400a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32HG322F64"
> > +
> > +ZEPHYR_BOARD = "efm32hg_slstk3400a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32pg-stk3401a.conf
> b/meta-zephyr-bsp/conf/machine/efm32pg-stk3401a.conf
> > new file mode 100755
> > index 0000000..93f9dbe
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32pg-stk3401a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32pg-stk3401a
> > +#@DESCRIPTION: Machine configuration for efm32pg-stk3401a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32pg-stk3401a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efm32pg_stk3401a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32PG1B200F256GM48"
> > +
> > +ZEPHYR_BOARD = "efm32pg_stk3401a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-jg.conf
> b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-jg.conf
> > new file mode 100755
> > index 0000000..9b713e2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a-jg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32pg-stk3402a-jg
> > +#@DESCRIPTION: Machine configuration for efm32pg-stk3402a-jg , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32pg-stk3402a-jg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: efm32pg_stk3402a_jg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32JG12B500F1024GL125"
> > +
> > +ZEPHYR_BOARD = "efm32pg_stk3402a_jg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a.conf
> b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a.conf
> > new file mode 100755
> > index 0000000..62ea0ea
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32pg-stk3402a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32pg-stk3402a
> > +#@DESCRIPTION: Machine configuration for efm32pg-stk3402a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32pg-stk3402a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efm32pg_stk3402a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32PG12B500F1024GL125"
> > +
> > +ZEPHYR_BOARD = "efm32pg_stk3402a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efm32wg-stk3800.conf
> b/meta-zephyr-bsp/conf/machine/efm32wg-stk3800.conf
> > new file mode 100755
> > index 0000000..6f2e73a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efm32wg-stk3800.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efm32wg-stk3800
> > +#@DESCRIPTION: Machine configuration for efm32wg-stk3800 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efm32wg-stk3800 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efm32wg_stk3800
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFM32WG990F256"
> > +
> > +ZEPHYR_BOARD = "efm32wg_stk3800"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4104a.conf
> b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4104a.conf
> > new file mode 100755
> > index 0000000..05156b1
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4104a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efr32-radio-brd4104a
> > +#@DESCRIPTION: Machine configuration for efr32-radio-brd4104a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efr32-radio-brd4104a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efr32_radio_brd4104a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFR32BG13P632F512GM48"
> > +
> > +ZEPHYR_BOARD = "efr32_radio_brd4104a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4180a.conf
> b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4180a.conf
> > new file mode 100755
> > index 0000000..233fd9d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4180a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efr32-radio-brd4180a
> > +#@DESCRIPTION: Machine configuration for efr32-radio-brd4180a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efr32-radio-brd4180a = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: efr32_radio_brd4180a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFR32MG21A020F1024IM32"
> > +
> > +ZEPHYR_BOARD = "efr32_radio_brd4180a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4250b.conf
> b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4250b.conf
> > new file mode 100755
> > index 0000000..d09b3c6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4250b.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efr32-radio-brd4250b
> > +#@DESCRIPTION: Machine configuration for efr32-radio-brd4250b , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efr32-radio-brd4250b = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efr32_radio_brd4250b
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFR32FG1P133F256GM48"
> > +
> > +ZEPHYR_BOARD = "efr32_radio_brd4250b"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efr32-radio-brd4255a.conf
> b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4255a.conf
> > new file mode 100755
> > index 0000000..ff3acc3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efr32-radio-brd4255a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efr32-radio-brd4255a
> > +#@DESCRIPTION: Machine configuration for efr32-radio-brd4255a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efr32-radio-brd4255a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efr32_radio_brd4255a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFR32FG13P233F512GM48"
> > +
> > +ZEPHYR_BOARD = "efr32_radio_brd4255a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/efr32mg-sltb004a.conf b/meta-
> zephyr-bsp/conf/machine/efr32mg-sltb004a.conf
> > new file mode 100755
> > index 0000000..a791053
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/efr32mg-sltb004a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: efr32mg-sltb004a
> > +#@DESCRIPTION: Machine configuration for efr32mg-sltb004a , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_efr32mg-sltb004a = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: efr32mg_sltb004a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DEFR32MG12P332F1024GL125"
> > +
> > +ZEPHYR_BOARD = "efr32mg_sltb004a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf b/meta-
> zephyr-bsp/conf/machine/ehl-crb-sbl.conf
> > new file mode 100755
> > index 0000000..39c90fd
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ehl-crb-sbl.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ehl-crb-sbl
> > +#@DESCRIPTION: Machine configuration for ehl-crb-sbl , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ehl-crb-sbl = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: ehl_crb_sbl
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "ehl_crb_sbl"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ehl-crb.conf b/meta-zephyr-
> bsp/conf/machine/ehl-crb.conf
> > new file mode 100755
> > index 0000000..c4a8f58
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ehl-crb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ehl-crb
> > +#@DESCRIPTION: Machine configuration for ehl-crb , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ehl-crb = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: ehl_crb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "ehl_crb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit-em11d.conf
> b/meta-zephyr-bsp/conf/machine/em-starterkit-em11d.conf
> > new file mode 100755
> > index 0000000..2f2f12c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/em-starterkit-em11d.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: em-starterkit-em11d
> > +#@DESCRIPTION: Machine configuration for em-starterkit-em11d , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_em-starterkit-em11d = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: em_starterkit_em11d
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "em_starterkit_em11d"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit-em7d-v22.conf
> b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d-v22.conf
> > new file mode 100755
> > index 0000000..e8684b1
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d-v22.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: em-starterkit-em7d-v22
> > +#@DESCRIPTION: Machine configuration for em-starterkit-em7d-v22 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_em-starterkit-em7d-v22 = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_dmips
> > +# ARCH: arc
> > +# BOARD: em_starterkit_em7d_v22
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "em_starterkit_em7d_v22"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit-em7d.conf
> b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d.conf
> > new file mode 100755
> > index 0000000..79e878d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/em-starterkit-em7d.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: em-starterkit-em7d
> > +#@DESCRIPTION: Machine configuration for em-starterkit-em7d , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_em-starterkit-em7d = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_dmips
> > +# ARCH: arc
> > +# BOARD: em_starterkit_em7d
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "em_starterkit_em7d"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/em-starterkit.conf b/meta-
> zephyr-bsp/conf/machine/em-starterkit.conf
> > new file mode 100755
> > index 0000000..b309b76
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/em-starterkit.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: em-starterkit
> > +#@DESCRIPTION: Machine configuration for em-starterkit , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_em-starterkit = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpus
> > +# ARCH: arc
> > +# BOARD: em_starterkit
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "em_starterkit"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em4.conf b/meta-
> zephyr-bsp/conf/machine/emsdp-em4.conf
> > new file mode 100755
> > index 0000000..f27e9d5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp-em4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp-em4
> > +#@DESCRIPTION: Machine configuration for emsdp-em4 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp-em4 = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: arcem
> > +# ARCH: arc
> > +# BOARD: emsdp_em4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp_em4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em5d.conf b/meta-
> zephyr-bsp/conf/machine/emsdp-em5d.conf
> > new file mode 100755
> > index 0000000..1838da8
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp-em5d.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp-em5d
> > +#@DESCRIPTION: Machine configuration for emsdp-em5d , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp-em5d = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: emsdp_em5d
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp_em5d"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em6.conf b/meta-
> zephyr-bsp/conf/machine/emsdp-em6.conf
> > new file mode 100755
> > index 0000000..4e3a14b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp-em6.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp-em6
> > +#@DESCRIPTION: Machine configuration for emsdp-em6 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp-em6 = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: arcem
> > +# ARCH: arc
> > +# BOARD: emsdp_em6
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp_em6"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em7d-esp.conf
> b/meta-zephyr-bsp/conf/machine/emsdp-em7d-esp.conf
> > new file mode 100755
> > index 0000000..1f9302f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp-em7d-esp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp-em7d-esp
> > +#@DESCRIPTION: Machine configuration for emsdp-em7d-esp , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp-em7d-esp = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: emsdp_em7d_esp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp_em7d_esp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em7d.conf b/meta-
> zephyr-bsp/conf/machine/emsdp-em7d.conf
> > new file mode 100755
> > index 0000000..8307615
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp-em7d.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp-em7d
> > +#@DESCRIPTION: Machine configuration for emsdp-em7d , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp-em7d = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: emsdp_em7d
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp_em7d"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp-em9d.conf b/meta-
> zephyr-bsp/conf/machine/emsdp-em9d.conf
> > new file mode 100755
> > index 0000000..5d39947
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp-em9d.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp-em9d
> > +#@DESCRIPTION: Machine configuration for emsdp-em9d , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp-em9d = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: emsdp_em9d
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp_em9d"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/emsdp.conf b/meta-zephyr-
> bsp/conf/machine/emsdp.conf
> > new file mode 100755
> > index 0000000..165e71c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/emsdp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: emsdp
> > +#@DESCRIPTION: Machine configuration for emsdp , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_emsdp = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: emsdp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "emsdp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/esp32c3-devkitm.conf b/meta-
> zephyr-bsp/conf/machine/esp32c3-devkitm.conf
> > new file mode 100755
> > index 0000000..080e136
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/esp32c3-devkitm.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: esp32c3-devkitm
> > +#@DESCRIPTION: Machine configuration for esp32c3-devkitm , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_esp32c3-devkitm = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: esp32c3_devkitm
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -D__ets__ -
> DESP_PLATFORM -DESPRESSIF_USE"
> > +
> > +ZEPHYR_BOARD = "esp32c3_devkitm"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/faze.conf b/meta-zephyr-
> bsp/conf/machine/faze.conf
> > new file mode 100755
> > index 0000000..ebc5f25
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/faze.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: faze
> > +#@DESCRIPTION: Machine configuration for faze , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_faze = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: faze
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "faze"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/frdm-k22f.conf b/meta-
> zephyr-bsp/conf/machine/frdm-k22f.conf
> > new file mode 100755
> > index 0000000..232196c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/frdm-k22f.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: frdm-k22f
> > +#@DESCRIPTION: Machine configuration for frdm-k22f , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_frdm-k22f = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: frdm_k22f
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MK22FN512VLH12 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "frdm_k22f"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/frdm-k64f.conf b/meta-
> zephyr-bsp/conf/machine/frdm-k64f.conf
> > new file mode 100755
> > index 0000000..057cf52
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/frdm-k64f.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: frdm-k64f
> > +#@DESCRIPTION: Machine configuration for frdm-k64f , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_frdm-k64f = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: frdm_k64f
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MK64FN1M0VLL12 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "frdm_k64f"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/frdm-k82f.conf b/meta-
> zephyr-bsp/conf/machine/frdm-k82f.conf
> > new file mode 100755
> > index 0000000..e16a751
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/frdm-k82f.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: frdm-k82f
> > +#@DESCRIPTION: Machine configuration for frdm-k82f , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_frdm-k82f = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: frdm_k82f
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MK82FN256VLL15 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "frdm_k82f"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/frdm-kl25z.conf b/meta-
> zephyr-bsp/conf/machine/frdm-kl25z.conf
> > new file mode 100755
> > index 0000000..eeb01d7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/frdm-kl25z.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: frdm-kl25z
> > +#@DESCRIPTION: Machine configuration for frdm-kl25z , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_frdm-kl25z = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: frdm_kl25z
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MKL25Z128VLK4 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "frdm_kl25z"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/frdm-kw41z.conf b/meta-
> zephyr-bsp/conf/machine/frdm-kw41z.conf
> > new file mode 100755
> > index 0000000..4ec7e0f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/frdm-kw41z.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: frdm-kw41z
> > +#@DESCRIPTION: Machine configuration for frdm-kw41z , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_frdm-kw41z = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: frdm_kw41z
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MKW41Z512VHT4 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "frdm_kw41z"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/fvp-base-revc-2xaemv8a.conf
> b/meta-zephyr-bsp/conf/machine/fvp-base-revc-2xaemv8a.conf
> > new file mode 100755
> > index 0000000..a607932
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/fvp-base-revc-2xaemv8a.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: fvp-base-revc-2xaemv8a
> > +#@DESCRIPTION: Machine configuration for fvp-base-revc-2xaemv8a ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_fvp-base-revc-2xaemv8a = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a53
> > +# ARCH: arm64
> > +# BOARD: fvp_base_revc_2xaemv8a
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "fvp_base_revc_2xaemv8a"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-smp.conf
> b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-smp.conf
> > new file mode 100755
> > index 0000000..6edf153
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r-smp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: fvp-baser-aemv8r-smp
> > +#@DESCRIPTION: Machine configuration for fvp-baser-aemv8r-smp ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_fvp-baser-aemv8r-smp = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: arm64
> > +# BOARD: fvp_baser_aemv8r_smp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "fvp_baser_aemv8r_smp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r.conf
> b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r.conf
> > new file mode 100755
> > index 0000000..23fb9d6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/fvp-baser-aemv8r.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: fvp-baser-aemv8r
> > +#@DESCRIPTION: Machine configuration for fvp-baser-aemv8r , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_fvp-baser-aemv8r = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: arm64
> > +# BOARD: fvp_baser_aemv8r
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "fvp_baser_aemv8r"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/google-kukui.conf b/meta-
> zephyr-bsp/conf/machine/google-kukui.conf
> > new file mode 100755
> > index 0000000..74acbe9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/google-kukui.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: google-kukui
> > +#@DESCRIPTION: Machine configuration for google-kukui , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_google-kukui = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: google_kukui
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F098xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "google_kukui"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/gr716a-mini.conf b/meta-
> zephyr-bsp/conf/machine/gr716a-mini.conf
> > new file mode 100755
> > index 0000000..1f5538d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/gr716a-mini.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: gr716a-mini
> > +#@DESCRIPTION: Machine configuration for gr716a-mini , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_gr716a-mini = "sparc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: sparc
> > +# BOARD: gr716a_mini
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "gr716a_mini"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hexiwear-k64.conf b/meta-
> zephyr-bsp/conf/machine/hexiwear-k64.conf
> > new file mode 100755
> > index 0000000..f6f31c5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hexiwear-k64.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hexiwear-k64
> > +#@DESCRIPTION: Machine configuration for hexiwear-k64 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hexiwear-k64 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: hexiwear_k64
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MK64FN1M0VDC12 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "hexiwear_k64"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hexiwear-kw40z.conf b/meta-
> zephyr-bsp/conf/machine/hexiwear-kw40z.conf
> > new file mode 100755
> > index 0000000..54aaff2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hexiwear-kw40z.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hexiwear-kw40z
> > +#@DESCRIPTION: Machine configuration for hexiwear-kw40z , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hexiwear-kw40z = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: hexiwear_kw40z
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MKW40Z160VHT4 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "hexiwear_kw40z"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hifive-unleashed.conf b/meta-
> zephyr-bsp/conf/machine/hifive-unleashed.conf
> > new file mode 100755
> > index 0000000..dafbf3d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hifive-unleashed.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hifive-unleashed
> > +#@DESCRIPTION: Machine configuration for hifive-unleashed , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hifive-unleashed = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: hifive_unleashed
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "hifive_unleashed"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hifive-unmatched.conf
> b/meta-zephyr-bsp/conf/machine/hifive-unmatched.conf
> > new file mode 100755
> > index 0000000..0cead26
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hifive-unmatched.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hifive-unmatched
> > +#@DESCRIPTION: Machine configuration for hifive-unmatched , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hifive-unmatched = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: hifive_unmatched
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "hifive_unmatched"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hifive1-revb.conf b/meta-
> zephyr-bsp/conf/machine/hifive1-revb.conf
> > new file mode 100755
> > index 0000000..e0b1a35
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hifive1-revb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hifive1-revb
> > +#@DESCRIPTION: Machine configuration for hifive1-revb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hifive1-revb = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: hifive1_revb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "hifive1_revb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hifive1.conf b/meta-zephyr-
> bsp/conf/machine/hifive1.conf
> > new file mode 100755
> > index 0000000..2e47deb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hifive1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hifive1
> > +#@DESCRIPTION: Machine configuration for hifive1 , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hifive1 = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: hifive1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "hifive1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/holyiot-yj16019.conf b/meta-
> zephyr-bsp/conf/machine/holyiot-yj16019.conf
> > new file mode 100755
> > index 0000000..bab70f6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/holyiot-yj16019.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: holyiot-yj16019
> > +#@DESCRIPTION: Machine configuration for holyiot-yj16019 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_holyiot-yj16019 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: holyiot_yj16019
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "holyiot_yj16019"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hsdk-2cores.conf b/meta-
> zephyr-bsp/conf/machine/hsdk-2cores.conf
> > new file mode 100755
> > index 0000000..da504e9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hsdk-2cores.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hsdk-2cores
> > +#@DESCRIPTION: Machine configuration for hsdk-2cores , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hsdk-2cores = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: archs
> > +# ARCH: arc
> > +# BOARD: hsdk_2cores
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "hsdk_2cores"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/hsdk.conf b/meta-zephyr-
> bsp/conf/machine/hsdk.conf
> > new file mode 100755
> > index 0000000..9a6280f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/hsdk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: hsdk
> > +#@DESCRIPTION: Machine configuration for hsdk , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_hsdk = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: archs
> > +# ARCH: arc
> > +# BOARD: hsdk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "hsdk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs15.conf b/meta-
> zephyr-bsp/conf/machine/intel-adsp-cavs15.conf
> > new file mode 100755
> > index 0000000..6d7e181
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs15.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: intel-adsp-cavs15
> > +#@DESCRIPTION: Machine configuration for intel-adsp-cavs15 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_intel-adsp-cavs15 = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: intel_adsp_cavs15
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "intel_adsp_cavs15"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs18.conf b/meta-
> zephyr-bsp/conf/machine/intel-adsp-cavs18.conf
> > new file mode 100755
> > index 0000000..8dcc0f5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs18.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: intel-adsp-cavs18
> > +#@DESCRIPTION: Machine configuration for intel-adsp-cavs18 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_intel-adsp-cavs18 = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: intel_adsp_cavs18
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "intel_adsp_cavs18"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs20.conf b/meta-
> zephyr-bsp/conf/machine/intel-adsp-cavs20.conf
> > new file mode 100755
> > index 0000000..0d1d430
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs20.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: intel-adsp-cavs20
> > +#@DESCRIPTION: Machine configuration for intel-adsp-cavs20 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_intel-adsp-cavs20 = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: intel_adsp_cavs20
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "intel_adsp_cavs20"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/intel-adsp-cavs25.conf b/meta-
> zephyr-bsp/conf/machine/intel-adsp-cavs25.conf
> > new file mode 100755
> > index 0000000..86a4a4f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/intel-adsp-cavs25.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: intel-adsp-cavs25
> > +#@DESCRIPTION: Machine configuration for intel-adsp-cavs25 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_intel-adsp-cavs25 = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: intel_adsp_cavs25
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "intel_adsp_cavs25"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/intel-s1000-crb.conf b/meta-
> zephyr-bsp/conf/machine/intel-s1000-crb.conf
> > new file mode 100755
> > index 0000000..5e59c59
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/intel-s1000-crb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: intel-s1000-crb
> > +#@DESCRIPTION: Machine configuration for intel-s1000-crb , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_intel-s1000-crb = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: intel_s1000_crb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "intel_s1000_crb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/iotdk.conf b/meta-zephyr-
> bsp/conf/machine/iotdk.conf
> > new file mode 100755
> > index 0000000..1cb547e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/iotdk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: iotdk
> > +#@DESCRIPTION: Machine configuration for iotdk , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_iotdk = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpus
> > +# ARCH: arc
> > +# BOARD: iotdk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "iotdk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ip-k66f.conf b/meta-zephyr-
> bsp/conf/machine/ip-k66f.conf
> > new file mode 100755
> > index 0000000..a6d8232
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ip-k66f.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ip-k66f
> > +#@DESCRIPTION: Machine configuration for ip-k66f , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ip-k66f = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ip_k66f
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MK66FN2M0VMD18 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "ip_k66f"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf b/meta-
> zephyr-bsp/conf/machine/it8xxx2-evb.conf
> > new file mode 100755
> > index 0000000..f9338b9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/it8xxx2-evb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: it8xxx2-evb
> > +#@DESCRIPTION: Machine configuration for it8xxx2-evb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_it8xxx2-evb = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: it8xxx2_evb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "it8xxx2_evb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/legend.conf b/meta-zephyr-
> bsp/conf/machine/legend.conf
> > new file mode 100755
> > index 0000000..261ce3f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/legend.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: legend
> > +#@DESCRIPTION: Machine configuration for legend , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_legend = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: legend
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F070xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "legend"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/litex-vexriscv.conf b/meta-
> zephyr-bsp/conf/machine/litex-vexriscv.conf
> > new file mode 100755
> > index 0000000..dc71e4f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/litex-vexriscv.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: litex-vexriscv
> > +#@DESCRIPTION: Machine configuration for litex-vexriscv , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_litex-vexriscv = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: litex_vexriscv
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "litex_vexriscv"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lora-e5-dev-board.conf
> b/meta-zephyr-bsp/conf/machine/lora-e5-dev-board.conf
> > new file mode 100755
> > index 0000000..75f266c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lora-e5-dev-board.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lora-e5-dev-board
> > +#@DESCRIPTION: Machine configuration for lora-e5-dev-board , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lora-e5-dev-board = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: lora_e5_dev_board
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32WLE5xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "lora_e5_dev_board"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso11u68.conf b/meta-
> zephyr-bsp/conf/machine/lpcxpresso11u68.conf
> > new file mode 100755
> > index 0000000..d0397cc
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso11u68.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso11u68
> > +#@DESCRIPTION: Machine configuration for lpcxpresso11u68 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso11u68 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: lpcxpresso11u68
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso11u68"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m0.conf
> b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m0.conf
> > new file mode 100755
> > index 0000000..6353f76
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso54114-m0
> > +#@DESCRIPTION: Machine configuration for lpcxpresso54114-m0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso54114-m0 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: lpcxpresso54114_m0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC54114J256BD64_cm0plus -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso54114_m0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m4.conf
> b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m4.conf
> > new file mode 100755
> > index 0000000..7640d95
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso54114-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso54114-m4
> > +#@DESCRIPTION: Machine configuration for lpcxpresso54114-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso54114-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: lpcxpresso54114_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC54114J256BD64_cm4 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso54114_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s16.conf b/meta-
> zephyr-bsp/conf/machine/lpcxpresso55s16.conf
> > new file mode 100755
> > index 0000000..482c144
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s16.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso55s16
> > +#@DESCRIPTION: Machine configuration for lpcxpresso55s16 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso55s16 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: lpcxpresso55s16
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC55S16JBD100 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso55s16"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s28.conf b/meta-
> zephyr-bsp/conf/machine/lpcxpresso55s28.conf
> > new file mode 100755
> > index 0000000..05419e0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s28.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso55s28
> > +#@DESCRIPTION: Machine configuration for lpcxpresso55s28 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso55s28 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: lpcxpresso55s28
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC55S28JBD100 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso55s28"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu0.conf
> b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu0.conf
> > new file mode 100755
> > index 0000000..719125a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso55s69-cpu0
> > +#@DESCRIPTION: Machine configuration for lpcxpresso55s69-cpu0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso55s69-cpu0 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: lpcxpresso55s69_cpu0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC55S69JBD100_cm33_core0 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso55s69_cpu0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu1.conf
> b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu1.conf
> > new file mode 100755
> > index 0000000..ac29fd0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-cpu1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso55s69-cpu1
> > +#@DESCRIPTION: Machine configuration for lpcxpresso55s69-cpu1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso55s69-cpu1 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: lpcxpresso55s69_cpu1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC55S69JBD100_cm33_core1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso55s69_cpu1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-ns.conf
> b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-ns.conf
> > new file mode 100755
> > index 0000000..1fe805d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/lpcxpresso55s69-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: lpcxpresso55s69-ns
> > +#@DESCRIPTION: Machine configuration for lpcxpresso55s69-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_lpcxpresso55s69-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: lpcxpresso55s69_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_LPC55S69JBD100_cm33_core0 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "lpcxpresso55s69_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/m2gl025-miv.conf b/meta-
> zephyr-bsp/conf/machine/m2gl025-miv.conf
> > new file mode 100755
> > index 0000000..73f4a90
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/m2gl025-miv.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: m2gl025-miv
> > +#@DESCRIPTION: Machine configuration for m2gl025-miv , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_m2gl025-miv = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: m2gl025_miv
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "m2gl025_miv"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mec1501modular-
> assy6885.conf b/meta-zephyr-bsp/conf/machine/mec1501modular-
> assy6885.conf
> > new file mode 100755
> > index 0000000..0191138
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mec1501modular-assy6885.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mec1501modular-assy6885
> > +#@DESCRIPTION: Machine configuration for mec1501modular-assy6885 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mec1501modular-assy6885 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mec1501modular_assy6885
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mec1501modular_assy6885"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mec15xxevb-assy6853.conf
> b/meta-zephyr-bsp/conf/machine/mec15xxevb-assy6853.conf
> > new file mode 100755
> > index 0000000..aae48bf
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mec15xxevb-assy6853.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mec15xxevb-assy6853
> > +#@DESCRIPTION: Machine configuration for mec15xxevb-assy6853 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mec15xxevb-assy6853 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mec15xxevb_assy6853
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mec15xxevb_assy6853"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mec172xevb-assy6906.conf
> b/meta-zephyr-bsp/conf/machine/mec172xevb-assy6906.conf
> > new file mode 100755
> > index 0000000..04f5b5e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mec172xevb-assy6906.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mec172xevb-assy6906
> > +#@DESCRIPTION: Machine configuration for mec172xevb-assy6906 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mec172xevb-assy6906 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mec172xevb_assy6906
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mec172xevb_assy6906"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mec2016evb-assy6797.conf
> b/meta-zephyr-bsp/conf/machine/mec2016evb-assy6797.conf
> > new file mode 100755
> > index 0000000..03f3b9c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mec2016evb-assy6797.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mec2016evb-assy6797
> > +#@DESCRIPTION: Machine configuration for mec2016evb-assy6797 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mec2016evb-assy6797 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mec2016evb_assy6797
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mec2016evb_assy6797"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mercury-xu.conf b/meta-
> zephyr-bsp/conf/machine/mercury-xu.conf
> > new file mode 100755
> > index 0000000..72dd27d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mercury-xu.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mercury-xu
> > +#@DESCRIPTION: Machine configuration for mercury-xu , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mercury-xu = "arm"
> > +
> > +DEFAULTUNE ?= "cortexr5"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> r5
> > +# ARCH: arm
> > +# BOARD: mercury_xu
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mercury_xu"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mikroe-clicker-2.conf b/meta-
> zephyr-bsp/conf/machine/mikroe-clicker-2.conf
> > new file mode 100755
> > index 0000000..35347e2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mikroe-clicker-2.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mikroe-clicker-2
> > +#@DESCRIPTION: Machine configuration for mikroe-clicker-2 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mikroe-clicker-2 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mikroe_clicker_2
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "mikroe_clicker_2"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for-
> stm32.conf b/meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for-
> stm32.conf
> > new file mode 100755
> > index 0000000..3553787
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mikroe-mini-m4-for-stm32.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mikroe-mini-m4-for-stm32
> > +#@DESCRIPTION: Machine configuration for mikroe-mini-m4-for-stm32 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mikroe-mini-m4-for-stm32 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mikroe_mini_m4_for_stm32
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F415xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000"
> > +
> > +ZEPHYR_BOARD = "mikroe_mini_m4_for_stm32"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimx8mm-evk.conf
> > new file mode 100755
> > index 0000000..7d1bad8
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimx8mm-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimx8mm-evk
> > +#@DESCRIPTION: Machine configuration for mimx8mm-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimx8mm-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mimx8mm_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMX8MM6DVTLZ -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "mimx8mm_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1010-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1010-evk.conf
> > new file mode 100755
> > index 0000000..3aca568
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1010-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1010-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1010-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1010-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1010_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1011DAE5A -
> DXIP_BOOT_HEADER_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1010_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1015-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1015-evk.conf
> > new file mode 100755
> > index 0000000..af4ab6c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1015-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1015-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1015-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1015-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1015_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1015DAF5A -
> DXIP_BOOT_HEADER_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1015_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1020-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1020-evk.conf
> > new file mode 100755
> > index 0000000..bc66f47
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1020-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1020-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1020-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1020-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1020_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1021DAG5A -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1020_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1024-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1024-evk.conf
> > new file mode 100755
> > index 0000000..79fdd67
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1024-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1024-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1024-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1024-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1024_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1024DAG5A -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1024_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1050-evk-qspi.conf
> b/meta-zephyr-bsp/conf/machine/mimxrt1050-evk-qspi.conf
> > new file mode 100755
> > index 0000000..736c7c2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1050-evk-qspi.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1050-evk-qspi
> > +#@DESCRIPTION: Machine configuration for mimxrt1050-evk-qspi , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1050-evk-qspi = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1050_evk_qspi
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1052DVL6B -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1050_evk_qspi"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1050-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1050-evk.conf
> > new file mode 100755
> > index 0000000..43e8e53
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1050-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1050-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1050-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1050-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1050_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1052DVL6B -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1050_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1060-evk-
> hyperflash.conf b/meta-zephyr-bsp/conf/machine/mimxrt1060-evk-
> hyperflash.conf
> > new file mode 100755
> > index 0000000..e328c68
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1060-evk-hyperflash.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1060-evk-hyperflash
> > +#@DESCRIPTION: Machine configuration for mimxrt1060-evk-hyperflash ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1060-evk-hyperflash = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1060_evk_hyperflash
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1062DVL6A -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1060_evk_hyperflash"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1060-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1060-evk.conf
> > new file mode 100755
> > index 0000000..91c35b3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1060-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1060-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1060-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1060-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1060_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1062DVL6A -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1060_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1064-evk.conf b/meta-
> zephyr-bsp/conf/machine/mimxrt1064-evk.conf
> > new file mode 100755
> > index 0000000..d60c5e7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1064-evk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1064-evk
> > +#@DESCRIPTION: Machine configuration for mimxrt1064-evk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1064-evk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1064_evk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1064DVL6A -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1064_evk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm4.conf
> b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm4.conf
> > new file mode 100755
> > index 0000000..bb3eeb6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1170-evk-cm4
> > +#@DESCRIPTION: Machine configuration for mimxrt1170-evk-cm4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1170-evk-cm4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: mimxrt1170_evk_cm4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1176DVMAA_cm4 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1170_evk_cm4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm7.conf
> b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm7.conf
> > new file mode 100755
> > index 0000000..49f3ef3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt1170-evk-cm7.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt1170-evk-cm7
> > +#@DESCRIPTION: Machine configuration for mimxrt1170-evk-cm7 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt1170-evk-cm7 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mimxrt1170_evk_cm7
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1176DVMAA_cm7 -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mimxrt1170_evk_cm7"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mimxrt685-evk-cm33.conf
> b/meta-zephyr-bsp/conf/machine/mimxrt685-evk-cm33.conf
> > new file mode 100755
> > index 0000000..583c2a4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mimxrt685-evk-cm33.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mimxrt685-evk-cm33
> > +#@DESCRIPTION: Machine configuration for mimxrt685-evk-cm33 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mimxrt685-evk-cm33 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: mimxrt685_evk_cm33
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT685SFVKB_cm33 -
> DBOOT_HEADER_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024"
> > +
> > +ZEPHYR_BOARD = "mimxrt685_evk_cm33"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mm-feather.conf b/meta-
> zephyr-bsp/conf/machine/mm-feather.conf
> > new file mode 100755
> > index 0000000..371904b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mm-feather.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mm-feather
> > +#@DESCRIPTION: Machine configuration for mm-feather , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mm-feather = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mm_feather
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1062DVL6A -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mm_feather"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mm-swiftio.conf b/meta-
> zephyr-bsp/conf/machine/mm-swiftio.conf
> > new file mode 100755
> > index 0000000..5e4df1f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mm-swiftio.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mm-swiftio
> > +#@DESCRIPTION: Machine configuration for mm-swiftio , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mm-swiftio = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: mm_swiftio
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1052DVL6B -
> DXIP_BOOT_HEADER_ENABLE=1 -DXIP_BOOT_HEADER_DCD_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "mm_swiftio"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mps2-an385.conf b/meta-
> zephyr-bsp/conf/machine/mps2-an385.conf
> > new file mode 100755
> > index 0000000..d3cd26b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mps2-an385.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mps2-an385
> > +#@DESCRIPTION: Machine configuration for mps2-an385 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mps2-an385 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: mps2_an385
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mps2_an385"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mps2-an521-ns.conf b/meta-
> zephyr-bsp/conf/machine/mps2-an521-ns.conf
> > new file mode 100755
> > index 0000000..a889463
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mps2-an521-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mps2-an521-ns
> > +#@DESCRIPTION: Machine configuration for mps2-an521-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mps2-an521-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: mps2_an521_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mps2_an521_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mps2-an521-remote.conf
> b/meta-zephyr-bsp/conf/machine/mps2-an521-remote.conf
> > new file mode 100755
> > index 0000000..0ad4e76
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mps2-an521-remote.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mps2-an521-remote
> > +#@DESCRIPTION: Machine configuration for mps2-an521-remote , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mps2-an521-remote = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: mps2_an521_remote
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mps2_an521_remote"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mps2-an521.conf b/meta-
> zephyr-bsp/conf/machine/mps2-an521.conf
> > new file mode 100755
> > index 0000000..25d0165
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mps2-an521.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mps2-an521
> > +#@DESCRIPTION: Machine configuration for mps2-an521 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mps2-an521 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: mps2_an521
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mps2_an521"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/mps3-an547.conf b/meta-
> zephyr-bsp/conf/machine/mps3-an547.conf
> > new file mode 100755
> > index 0000000..657e9ab
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/mps3-an547.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: mps3-an547
> > +#@DESCRIPTION: Machine configuration for mps3-an547 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_mps3-an547 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm55"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m55
> > +# ARCH: arm
> > +# BOARD: mps3_an547
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "mps3_an547"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/msp-exp432p401r-
> launchxl.conf b/meta-zephyr-bsp/conf/machine/msp-exp432p401r-
> launchxl.conf
> > new file mode 100755
> > index 0000000..4ec86ef
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/msp-exp432p401r-launchxl.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: msp-exp432p401r-launchxl
> > +#@DESCRIPTION: Machine configuration for msp-exp432p401r-launchxl ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_msp-exp432p401r-launchxl = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: msp_exp432p401r_launchxl
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__MSP432P401R__ -D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "msp_exp432p401r_launchxl"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/native-posix-64.conf b/meta-
> zephyr-bsp/conf/machine/native-posix-64.conf
> > new file mode 100755
> > index 0000000..b0391e3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/native-posix-64.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: native-posix-64
> > +#@DESCRIPTION: Machine configuration for native-posix-64 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_native-posix-64 = "posix"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: posix
> > +# BOARD: native_posix_64
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D_POSIX_C_SOURCE=200809 -D_XOPEN_SOURCE=600 -
> D_XOPEN_SOURCE_EXTENDED"
> > +
> > +ZEPHYR_BOARD = "native_posix_64"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/native-posix.conf b/meta-
> zephyr-bsp/conf/machine/native-posix.conf
> > new file mode 100755
> > index 0000000..f8e05f7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/native-posix.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: native-posix
> > +#@DESCRIPTION: Machine configuration for native-posix , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_native-posix = "posix"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: posix
> > +# BOARD: native_posix
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D_POSIX_C_SOURCE=200809 -D_XOPEN_SOURCE=600 -
> D_XOPEN_SOURCE_EXTENDED"
> > +
> > +ZEPHYR_BOARD = "native_posix"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/npcx7m6fb-evb.conf b/meta-
> zephyr-bsp/conf/machine/npcx7m6fb-evb.conf
> > new file mode 100755
> > index 0000000..bfec38f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/npcx7m6fb-evb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: npcx7m6fb-evb
> > +#@DESCRIPTION: Machine configuration for npcx7m6fb-evb , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_npcx7m6fb-evb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: npcx7m6fb_evb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "npcx7m6fb_evb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/npcx9m6f-evb.conf b/meta-
> zephyr-bsp/conf/machine/npcx9m6f-evb.conf
> > new file mode 100755
> > index 0000000..c4e18cf
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/npcx9m6f-evb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: npcx9m6f-evb
> > +#@DESCRIPTION: Machine configuration for npcx9m6f-evb , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_npcx9m6f-evb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: npcx9m6f_evb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "npcx9m6f_evb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf21540dk-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/nrf21540dk-nrf52840.conf
> > new file mode 100755
> > index 0000000..ef4787b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf21540dk-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf21540dk-nrf52840
> > +#@DESCRIPTION: Machine configuration for nrf21540dk-nrf52840 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf21540dk-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf21540dk_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf21540dk_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf51-ble400.conf b/meta-
> zephyr-bsp/conf/machine/nrf51-ble400.conf
> > new file mode 100755
> > index 0000000..30f1c1c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf51-ble400.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf51-ble400
> > +#@DESCRIPTION: Machine configuration for nrf51-ble400 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf51-ble400 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nrf51_ble400
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf51_ble400"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf51-blenano.conf b/meta-
> zephyr-bsp/conf/machine/nrf51-blenano.conf
> > new file mode 100755
> > index 0000000..a633156
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf51-blenano.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf51-blenano
> > +#@DESCRIPTION: Machine configuration for nrf51-blenano , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf51-blenano = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nrf51_blenano
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf51_blenano"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf51-vbluno51.conf b/meta-
> zephyr-bsp/conf/machine/nrf51-vbluno51.conf
> > new file mode 100755
> > index 0000000..5dedbc6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf51-vbluno51.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf51-vbluno51
> > +#@DESCRIPTION: Machine configuration for nrf51-vbluno51 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf51-vbluno51 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nrf51_vbluno51
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAC"
> > +
> > +ZEPHYR_BOARD = "nrf51_vbluno51"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf51dk-nrf51422.conf b/meta-
> zephyr-bsp/conf/machine/nrf51dk-nrf51422.conf
> > new file mode 100755
> > index 0000000..2848d3b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf51dk-nrf51422.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf51dk-nrf51422
> > +#@DESCRIPTION: Machine configuration for nrf51dk-nrf51422 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf51dk-nrf51422 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nrf51dk_nrf51422
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAC"
> > +
> > +ZEPHYR_BOARD = "nrf51dk_nrf51422"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf51dongle-nrf51422.conf
> b/meta-zephyr-bsp/conf/machine/nrf51dongle-nrf51422.conf
> > new file mode 100755
> > index 0000000..0497423
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf51dongle-nrf51422.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf51dongle-nrf51422
> > +#@DESCRIPTION: Machine configuration for nrf51dongle-nrf51422 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf51dongle-nrf51422 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nrf51dongle_nrf51422
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAC"
> > +
> > +ZEPHYR_BOARD = "nrf51dongle_nrf51422"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52-adafruit-feather.conf
> b/meta-zephyr-bsp/conf/machine/nrf52-adafruit-feather.conf
> > new file mode 100755
> > index 0000000..f97f874
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52-adafruit-feather.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52-adafruit-feather
> > +#@DESCRIPTION: Machine configuration for nrf52-adafruit-feather , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52-adafruit-feather = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52_adafruit_feather
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52_adafruit_feather"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52-blenano2.conf b/meta-
> zephyr-bsp/conf/machine/nrf52-blenano2.conf
> > new file mode 100755
> > index 0000000..d468764
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52-blenano2.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52-blenano2
> > +#@DESCRIPTION: Machine configuration for nrf52-blenano2 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52-blenano2 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52_blenano2
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52_blenano2"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52-sparkfun.conf b/meta-
> zephyr-bsp/conf/machine/nrf52-sparkfun.conf
> > new file mode 100755
> > index 0000000..968fd59
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52-sparkfun.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52-sparkfun
> > +#@DESCRIPTION: Machine configuration for nrf52-sparkfun , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52-sparkfun = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52_sparkfun
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52_sparkfun"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52-vbluno52.conf b/meta-
> zephyr-bsp/conf/machine/nrf52-vbluno52.conf
> > new file mode 100755
> > index 0000000..5e06316
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52-vbluno52.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52-vbluno52
> > +#@DESCRIPTION: Machine configuration for nrf52-vbluno52 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52-vbluno52 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52_vbluno52
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52_vbluno52"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52832-mdk.conf b/meta-
> zephyr-bsp/conf/machine/nrf52832-mdk.conf
> > new file mode 100755
> > index 0000000..37db366
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52832-mdk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52832-mdk
> > +#@DESCRIPTION: Machine configuration for nrf52832-mdk , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52832-mdk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52832_mdk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52832_mdk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52820.conf
> b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52820.conf
> > new file mode 100755
> > index 0000000..67c9a58
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52820.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52833dk-nrf52820
> > +#@DESCRIPTION: Machine configuration for nrf52833dk-nrf52820 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52833dk-nrf52820 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52833dk_nrf52820
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> DDEVELOP_IN_NRF52833 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 -
> D__PROGRAM_START -DNRF52820_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52833dk_nrf52820"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52833.conf
> b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52833.conf
> > new file mode 100755
> > index 0000000..6f99a90
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52833dk-nrf52833.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52833dk-nrf52833
> > +#@DESCRIPTION: Machine configuration for nrf52833dk-nrf52833 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52833dk-nrf52833 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52833dk_nrf52833
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52833_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52833dk_nrf52833"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52840-blip.conf b/meta-
> zephyr-bsp/conf/machine/nrf52840-blip.conf
> > new file mode 100755
> > index 0000000..5d542fc
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52840-blip.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52840-blip
> > +#@DESCRIPTION: Machine configuration for nrf52840-blip , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52840-blip = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52840_blip
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52840_blip"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52840-mdk.conf b/meta-
> zephyr-bsp/conf/machine/nrf52840-mdk.conf
> > new file mode 100755
> > index 0000000..96a073b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52840-mdk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52840-mdk
> > +#@DESCRIPTION: Machine configuration for nrf52840-mdk , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52840-mdk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52840_mdk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52840_mdk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52840-papyr.conf b/meta-
> zephyr-bsp/conf/machine/nrf52840-papyr.conf
> > new file mode 100755
> > index 0000000..ef55106
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52840-papyr.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52840-papyr
> > +#@DESCRIPTION: Machine configuration for nrf52840-papyr , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52840-papyr = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52840_papyr
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52840_papyr"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52840dk-nrf52811.conf
> b/meta-zephyr-bsp/conf/machine/nrf52840dk-nrf52811.conf
> > new file mode 100755
> > index 0000000..0574979
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52840dk-nrf52811.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52840dk-nrf52811
> > +#@DESCRIPTION: Machine configuration for nrf52840dk-nrf52811 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52840dk-nrf52811 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52840dk_nrf52811
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> DDEVELOP_IN_NRF52840 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 -
> D__PROGRAM_START -DNRF52811_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52840dk_nrf52811"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52840dongle-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/nrf52840dongle-nrf52840.conf
> > new file mode 100755
> > index 0000000..bc50c95
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52840dongle-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52840dongle-nrf52840
> > +#@DESCRIPTION: Machine configuration for nrf52840dongle-nrf52840 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52840dongle-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52840dongle_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52840dongle_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52805.conf b/meta-
> zephyr-bsp/conf/machine/nrf52dk-nrf52805.conf
> > new file mode 100755
> > index 0000000..39906e0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52805.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52dk-nrf52805
> > +#@DESCRIPTION: Machine configuration for nrf52dk-nrf52805 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52dk-nrf52805 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52dk_nrf52805
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> DDEVELOP_IN_NRF52832 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 -
> D__PROGRAM_START -DNRF52805_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52dk_nrf52805"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52810.conf b/meta-
> zephyr-bsp/conf/machine/nrf52dk-nrf52810.conf
> > new file mode 100755
> > index 0000000..ee2ba8a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52810.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52dk-nrf52810
> > +#@DESCRIPTION: Machine configuration for nrf52dk-nrf52810 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52dk-nrf52810 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52dk_nrf52810
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> DDEVELOP_IN_NRF52832 -DNRFX_COREDEP_DELAY_US_LOOP_CYCLES=3 -
> D__PROGRAM_START -DNRF52810_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52dk_nrf52810"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52832.conf b/meta-
> zephyr-bsp/conf/machine/nrf52dk-nrf52832.conf
> > new file mode 100755
> > index 0000000..1d2d76f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf52dk-nrf52832.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf52dk-nrf52832
> > +#@DESCRIPTION: Machine configuration for nrf52dk-nrf52832 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf52dk-nrf52832 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf52dk_nrf52832
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf52dk_nrf52832"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp-
> ns.conf b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp-
> ns.conf
> > new file mode 100755
> > index 0000000..bae7612
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf5340dk-nrf5340-cpuapp-ns
> > +#@DESCRIPTION: Machine configuration for nrf5340dk-nrf5340-cpuapp-
> ns , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf5340dk-nrf5340-cpuapp-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf5340dk_nrf5340_cpuapp_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_APPLICATION -
> DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "nrf5340dk_nrf5340_cpuapp_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-
> cpuapp.conf b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-
> cpuapp.conf
> > new file mode 100755
> > index 0000000..20773a5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpuapp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf5340dk-nrf5340-cpuapp
> > +#@DESCRIPTION: Machine configuration for nrf5340dk-nrf5340-cpuapp ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf5340dk-nrf5340-cpuapp = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf5340dk_nrf5340_cpuapp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_APPLICATION"
> > +
> > +ZEPHYR_BOARD = "nrf5340dk_nrf5340_cpuapp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpunet.conf
> b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpunet.conf
> > new file mode 100755
> > index 0000000..3b71038
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf5340dk-nrf5340-cpunet.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf5340dk-nrf5340-cpunet
> > +#@DESCRIPTION: Machine configuration for nrf5340dk-nrf5340-cpunet ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf5340dk-nrf5340-cpunet = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: nrf5340dk_nrf5340_cpunet
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_NETWORK"
> > +
> > +ZEPHYR_BOARD = "nrf5340dk_nrf5340_cpunet"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue21-ns.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21-ns.conf
> > new file mode 100755
> > index 0000000..685cc3a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160-innblue21-ns
> > +#@DESCRIPTION: Machine configuration for nrf9160-innblue21-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160-innblue21-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf9160_innblue21_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "nrf9160_innblue21_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue21.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21.conf
> > new file mode 100755
> > index 0000000..3b2a52c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue21.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160-innblue21
> > +#@DESCRIPTION: Machine configuration for nrf9160-innblue21 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160-innblue21 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf9160_innblue21
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf9160_innblue21"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue22-ns.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22-ns.conf
> > new file mode 100755
> > index 0000000..6bca3b4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160-innblue22-ns
> > +#@DESCRIPTION: Machine configuration for nrf9160-innblue22-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160-innblue22-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf9160_innblue22_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "nrf9160_innblue22_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160-innblue22.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22.conf
> > new file mode 100755
> > index 0000000..2ad4fff
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160-innblue22.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160-innblue22
> > +#@DESCRIPTION: Machine configuration for nrf9160-innblue22 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160-innblue22 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf9160_innblue22
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf9160_innblue22"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf52840.conf
> > new file mode 100755
> > index 0000000..b4be5b8
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160dk-nrf52840
> > +#@DESCRIPTION: Machine configuration for nrf9160dk-nrf52840 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160dk-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nrf9160dk_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf9160dk_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-ns.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-ns.conf
> > new file mode 100755
> > index 0000000..b8501b2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160dk-nrf9160-ns
> > +#@DESCRIPTION: Machine configuration for nrf9160dk-nrf9160-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160dk-nrf9160-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf9160dk_nrf9160_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "nrf9160dk_nrf9160_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160.conf
> b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160.conf
> > new file mode 100755
> > index 0000000..69fd059
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nrf9160dk-nrf9160.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nrf9160dk-nrf9160
> > +#@DESCRIPTION: Machine configuration for nrf9160dk-nrf9160 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nrf9160dk-nrf9160 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nrf9160dk_nrf9160
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "nrf9160dk_nrf9160"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-em.conf b/meta-zephyr-
> bsp/conf/machine/nsim-em.conf
> > new file mode 100755
> > index 0000000..9274abe
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-em.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-em
> > +#@DESCRIPTION: Machine configuration for nsim-em , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-em = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: nsim_em
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_em"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-em7d-v22.conf b/meta-
> zephyr-bsp/conf/machine/nsim-em7d-v22.conf
> > new file mode 100755
> > index 0000000..a7f9950
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-em7d-v22.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-em7d-v22
> > +#@DESCRIPTION: Machine configuration for nsim-em7d-v22 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-em7d-v22 = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: nsim_em7d_v22
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_em7d_v22"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf b/meta-
> zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf
> > new file mode 100755
> > index 0000000..5d5718a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-hs-mpuv6.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-hs-mpuv6
> > +#@DESCRIPTION: Machine configuration for nsim-hs-mpuv6 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-hs-mpuv6 = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: archs
> > +# ARCH: arc
> > +# BOARD: nsim_hs_mpuv6
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_hs_mpuv6"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf b/meta-
> zephyr-bsp/conf/machine/nsim-hs-smp.conf
> > new file mode 100755
> > index 0000000..1c88f60
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-hs-smp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-hs-smp
> > +#@DESCRIPTION: Machine configuration for nsim-hs-smp , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-hs-smp = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: archs
> > +# ARCH: arc
> > +# BOARD: nsim_hs_smp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_hs_smp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs.conf b/meta-zephyr-
> bsp/conf/machine/nsim-hs.conf
> > new file mode 100755
> > index 0000000..83ce5a4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-hs.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-hs
> > +#@DESCRIPTION: Machine configuration for nsim-hs , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-hs = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: archs
> > +# ARCH: arc
> > +# BOARD: nsim_hs
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_hs"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs6x-smp.conf b/meta-
> zephyr-bsp/conf/machine/nsim-hs6x-smp.conf
> > new file mode 100755
> > index 0000000..f7547f9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-hs6x-smp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-hs6x-smp
> > +#@DESCRIPTION: Machine configuration for nsim-hs6x-smp , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-hs6x-smp = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: arc64
> > +# ARCH: arc
> > +# BOARD: nsim_hs6x_smp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_hs6x_smp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-hs6x.conf b/meta-
> zephyr-bsp/conf/machine/nsim-hs6x.conf
> > new file mode 100755
> > index 0000000..8de4f88
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-hs6x.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-hs6x
> > +#@DESCRIPTION: Machine configuration for nsim-hs6x , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-hs6x = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: arc64
> > +# ARCH: arc
> > +# BOARD: nsim_hs6x
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_hs6x"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-sem-mpu-stack-
> guard.conf b/meta-zephyr-bsp/conf/machine/nsim-sem-mpu-stack-
> guard.conf
> > new file mode 100755
> > index 0000000..ab77f07
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-sem-mpu-stack-guard.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-sem-mpu-stack-guard
> > +#@DESCRIPTION: Machine configuration for nsim-sem-mpu-stack-guard ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-sem-mpu-stack-guard = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: nsim_sem_mpu_stack_guard
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_sem_mpu_stack_guard"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nsim-sem.conf b/meta-
> zephyr-bsp/conf/machine/nsim-sem.conf
> > new file mode 100755
> > index 0000000..d19e14d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nsim-sem.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nsim-sem
> > +#@DESCRIPTION: Machine configuration for nsim-sem , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nsim-sem = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> em4_fpuda
> > +# ARCH: arc
> > +# BOARD: nsim_sem
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nsim_sem"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f030r8.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f030r8.conf
> > new file mode 100755
> > index 0000000..4c87cb1
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f030r8.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f030r8
> > +#@DESCRIPTION: Machine configuration for nucleo-f030r8 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f030r8 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nucleo_f030r8
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F030x8 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f030r8"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f031k6.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f031k6.conf
> > new file mode 100755
> > index 0000000..129bfda
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f031k6.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f031k6
> > +#@DESCRIPTION: Machine configuration for nucleo-f031k6 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f031k6 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nucleo_f031k6
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F031x6 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f031k6"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f070rb.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f070rb.conf
> > new file mode 100755
> > index 0000000..c055cac
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f070rb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f070rb
> > +#@DESCRIPTION: Machine configuration for nucleo-f070rb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f070rb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nucleo_f070rb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F070xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f070rb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f091rc.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f091rc.conf
> > new file mode 100755
> > index 0000000..787d24c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f091rc.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f091rc
> > +#@DESCRIPTION: Machine configuration for nucleo-f091rc , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f091rc = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: nucleo_f091rc
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F091xC -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f091rc"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f103rb.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f103rb.conf
> > new file mode 100755
> > index 0000000..6eef806
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f103rb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f103rb
> > +#@DESCRIPTION: Machine configuration for nucleo-f103rb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f103rb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: nucleo_f103rb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f103rb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f207zg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f207zg.conf
> > new file mode 100755
> > index 0000000..ec434a0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f207zg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f207zg
> > +#@DESCRIPTION: Machine configuration for nucleo-f207zg , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f207zg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: nucleo_f207zg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F207xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f207zg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f302r8.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f302r8.conf
> > new file mode 100755
> > index 0000000..195aa71
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f302r8.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f302r8
> > +#@DESCRIPTION: Machine configuration for nucleo-f302r8 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f302r8 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f302r8
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F302x8 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f302r8"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f303k8.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f303k8.conf
> > new file mode 100755
> > index 0000000..49974a4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f303k8.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f303k8
> > +#@DESCRIPTION: Machine configuration for nucleo-f303k8 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f303k8 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f303k8
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F303x8 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f303k8"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f303re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f303re.conf
> > new file mode 100755
> > index 0000000..c28aeb8
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f303re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f303re
> > +#@DESCRIPTION: Machine configuration for nucleo-f303re , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f303re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f303re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F303xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f303re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f334r8.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f334r8.conf
> > new file mode 100755
> > index 0000000..7ee5162
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f334r8.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f334r8
> > +#@DESCRIPTION: Machine configuration for nucleo-f334r8 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f334r8 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f334r8
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F334x8 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f334r8"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f401re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f401re.conf
> > new file mode 100755
> > index 0000000..a325f66
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f401re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f401re
> > +#@DESCRIPTION: Machine configuration for nucleo-f401re , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f401re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f401re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F401xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f401re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f410rb.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f410rb.conf
> > new file mode 100755
> > index 0000000..400ea54
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f410rb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f410rb
> > +#@DESCRIPTION: Machine configuration for nucleo-f410rb , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f410rb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f410rb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F410Rx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f410rb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f411re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f411re.conf
> > new file mode 100755
> > index 0000000..0c81906
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f411re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f411re
> > +#@DESCRIPTION: Machine configuration for nucleo-f411re , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f411re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f411re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f411re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f412zg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f412zg.conf
> > new file mode 100755
> > index 0000000..0e9d6f3
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f412zg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f412zg
> > +#@DESCRIPTION: Machine configuration for nucleo-f412zg , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f412zg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f412zg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F412Zx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f412zg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f413zh.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f413zh.conf
> > new file mode 100755
> > index 0000000..3be787d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f413zh.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f413zh
> > +#@DESCRIPTION: Machine configuration for nucleo-f413zh , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f413zh = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f413zh
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F413xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f413zh"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f429zi.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f429zi.conf
> > new file mode 100755
> > index 0000000..320b7d6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f429zi.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f429zi
> > +#@DESCRIPTION: Machine configuration for nucleo-f429zi , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f429zi = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f429zi
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F429xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f429zi"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f446re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f446re.conf
> > new file mode 100755
> > index 0000000..aed71fc
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f446re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f446re
> > +#@DESCRIPTION: Machine configuration for nucleo-f446re , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f446re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_f446re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F446xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f446re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f746zg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f746zg.conf
> > new file mode 100755
> > index 0000000..2da861c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f746zg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f746zg
> > +#@DESCRIPTION: Machine configuration for nucleo-f746zg , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f746zg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_f746zg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F746xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f746zg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f756zg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f756zg.conf
> > new file mode 100755
> > index 0000000..628213a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f756zg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f756zg
> > +#@DESCRIPTION: Machine configuration for nucleo-f756zg , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f756zg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_f756zg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F756xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f756zg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-f767zi.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-f767zi.conf
> > new file mode 100755
> > index 0000000..2809f4b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-f767zi.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-f767zi
> > +#@DESCRIPTION: Machine configuration for nucleo-f767zi , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-f767zi = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_f767zi
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F767xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_f767zi"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g071rb.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-g071rb.conf
> > new file mode 100755
> > index 0000000..32eed89
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-g071rb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-g071rb
> > +#@DESCRIPTION: Machine configuration for nucleo-g071rb , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-g071rb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: nucleo_g071rb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32G071xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_g071rb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g0b1re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-g0b1re.conf
> > new file mode 100755
> > index 0000000..b5845bb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-g0b1re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-g0b1re
> > +#@DESCRIPTION: Machine configuration for nucleo-g0b1re , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-g0b1re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: nucleo_g0b1re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32G0B1xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_g0b1re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g431rb.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-g431rb.conf
> > new file mode 100755
> > index 0000000..0a22503
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-g431rb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-g431rb
> > +#@DESCRIPTION: Machine configuration for nucleo-g431rb , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-g431rb = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_g431rb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32G431xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=24000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_g431rb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-g474re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-g474re.conf
> > new file mode 100755
> > index 0000000..cd22101
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-g474re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-g474re
> > +#@DESCRIPTION: Machine configuration for nucleo-g474re , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-g474re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_g474re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32G474xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=24000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_g474re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h723zg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-h723zg.conf
> > new file mode 100755
> > index 0000000..ac381bd
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-h723zg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-h723zg
> > +#@DESCRIPTION: Machine configuration for nucleo-h723zg , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-h723zg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_h723zg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H723xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_h723zg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h743zi.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-h743zi.conf
> > new file mode 100755
> > index 0000000..1a00dfa
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-h743zi.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-h743zi
> > +#@DESCRIPTION: Machine configuration for nucleo-h743zi , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-h743zi = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_h743zi
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H743xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_h743zi"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m4.conf
> b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m4.conf
> > new file mode 100755
> > index 0000000..3f06beb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-h745zi-q-m4
> > +#@DESCRIPTION: Machine configuration for nucleo-h745zi-q-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-h745zi-q-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_h745zi_q_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H745xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_h745zi_q_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m7.conf
> b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m7.conf
> > new file mode 100755
> > index 0000000..bd08436
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-h745zi-q-m7.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-h745zi-q-m7
> > +#@DESCRIPTION: Machine configuration for nucleo-h745zi-q-m7 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-h745zi-q-m7 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_h745zi_q_m7
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H745xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_h745zi_q_m7"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-h753zi.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-h753zi.conf
> > new file mode 100755
> > index 0000000..06d9045
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-h753zi.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-h753zi
> > +#@DESCRIPTION: Machine configuration for nucleo-h753zi , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-h753zi = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: nucleo_h753zi
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H753xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_h753zi"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l011k4.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l011k4.conf
> > new file mode 100755
> > index 0000000..d8ddf96
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l011k4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l011k4
> > +#@DESCRIPTION: Machine configuration for nucleo-l011k4 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l011k4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: nucleo_l011k4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L011xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l011k4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l031k6.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l031k6.conf
> > new file mode 100755
> > index 0000000..e2a441e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l031k6.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l031k6
> > +#@DESCRIPTION: Machine configuration for nucleo-l031k6 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l031k6 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: nucleo_l031k6
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L031xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l031k6"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l053r8.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l053r8.conf
> > new file mode 100755
> > index 0000000..b5fd303
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l053r8.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l053r8
> > +#@DESCRIPTION: Machine configuration for nucleo-l053r8 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l053r8 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: nucleo_l053r8
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L053xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l053r8"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l073rz.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l073rz.conf
> > new file mode 100755
> > index 0000000..91bb63e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l073rz.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l073rz
> > +#@DESCRIPTION: Machine configuration for nucleo-l073rz , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l073rz = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: nucleo_l073rz
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L073xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l073rz"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l152re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l152re.conf
> > new file mode 100755
> > index 0000000..4fe8554
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l152re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l152re
> > +#@DESCRIPTION: Machine configuration for nucleo-l152re , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l152re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: nucleo_l152re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L152xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l152re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l412rb-p.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l412rb-p.conf
> > new file mode 100755
> > index 0000000..6f48a3c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l412rb-p.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l412rb-p
> > +#@DESCRIPTION: Machine configuration for nucleo-l412rb-p , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l412rb-p = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l412rb_p
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L412xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l412rb_p"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l432kc.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l432kc.conf
> > new file mode 100755
> > index 0000000..a28366f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l432kc.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l432kc
> > +#@DESCRIPTION: Machine configuration for nucleo-l432kc , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l432kc = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l432kc
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L432xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l432kc"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l433rc-p.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l433rc-p.conf
> > new file mode 100755
> > index 0000000..325bfab
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l433rc-p.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l433rc-p
> > +#@DESCRIPTION: Machine configuration for nucleo-l433rc-p , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l433rc-p = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l433rc_p
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L433xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l433rc_p"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l452re-p.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l452re-p.conf
> > new file mode 100755
> > index 0000000..4fe3fa4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l452re-p.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l452re-p
> > +#@DESCRIPTION: Machine configuration for nucleo-l452re-p , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l452re-p = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l452re_p
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L452xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l452re_p"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l452re.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l452re.conf
> > new file mode 100755
> > index 0000000..e91db35
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l452re.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l452re
> > +#@DESCRIPTION: Machine configuration for nucleo-l452re , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l452re = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l452re
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L452xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l452re"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l476rg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l476rg.conf
> > new file mode 100755
> > index 0000000..21fae97
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l476rg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l476rg
> > +#@DESCRIPTION: Machine configuration for nucleo-l476rg , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l476rg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l476rg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L476xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l476rg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l496zg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l496zg.conf
> > new file mode 100755
> > index 0000000..d2c8f97
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l496zg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l496zg
> > +#@DESCRIPTION: Machine configuration for nucleo-l496zg , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l496zg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l496zg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L496xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l496zg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l4r5zi.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l4r5zi.conf
> > new file mode 100755
> > index 0000000..5f6df9c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l4r5zi.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l4r5zi
> > +#@DESCRIPTION: Machine configuration for nucleo-l4r5zi , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l4r5zi = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_l4r5zi
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L4R5xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l4r5zi"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-ns.conf
> b/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-ns.conf
> > new file mode 100755
> > index 0000000..5b1ecb9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l552ze-q-ns
> > +#@DESCRIPTION: Machine configuration for nucleo-l552ze-q-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l552ze-q-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nucleo_l552ze_q_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L552xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l552ze_q_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-l552ze-q.conf
> > new file mode 100755
> > index 0000000..c5daeb0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-l552ze-q.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-l552ze-q
> > +#@DESCRIPTION: Machine configuration for nucleo-l552ze-q , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-l552ze-q = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nucleo_l552ze_q
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L552xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_l552ze_q"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-u575zi-q.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-u575zi-q.conf
> > new file mode 100755
> > index 0000000..1c27ab9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-u575zi-q.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-u575zi-q
> > +#@DESCRIPTION: Machine configuration for nucleo-u575zi-q , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-u575zi-q = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: nucleo_u575zi_q
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32U575xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_u575zi_q"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-wb55rg.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-wb55rg.conf
> > new file mode 100755
> > index 0000000..6e0324a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-wb55rg.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-wb55rg
> > +#@DESCRIPTION: Machine configuration for nucleo-wb55rg , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-wb55rg = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_wb55rg
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32WB55xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=32000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_wb55rg"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nucleo-wl55jc.conf b/meta-
> zephyr-bsp/conf/machine/nucleo-wl55jc.conf
> > new file mode 100755
> > index 0000000..d2c4bd2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nucleo-wl55jc.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nucleo-wl55jc
> > +#@DESCRIPTION: Machine configuration for nucleo-wl55jc , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nucleo-wl55jc = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nucleo_wl55jc
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32WL55xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "nucleo_wl55jc"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nuvoton-pfm-m487.conf
> b/meta-zephyr-bsp/conf/machine/nuvoton-pfm-m487.conf
> > new file mode 100755
> > index 0000000..bf36fd0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nuvoton-pfm-m487.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nuvoton-pfm-m487
> > +#@DESCRIPTION: Machine configuration for nuvoton-pfm-m487 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nuvoton-pfm-m487 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: nuvoton_pfm_m487
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "nuvoton_pfm_m487"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nxp-adsp-imx8.conf b/meta-
> zephyr-bsp/conf/machine/nxp-adsp-imx8.conf
> > new file mode 100755
> > index 0000000..52e38d1
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nxp-adsp-imx8.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nxp-adsp-imx8
> > +#@DESCRIPTION: Machine configuration for nxp-adsp-imx8 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nxp-adsp-imx8 = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: nxp_adsp_imx8
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nxp_adsp_imx8"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-
> 2cores.conf b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-
> 2cores.conf
> > new file mode 100755
> > index 0000000..541a48c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-2cores.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nxp-ls1046ardb-smp-2cores
> > +#@DESCRIPTION: Machine configuration for nxp-ls1046ardb-smp-2cores ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nxp-ls1046ardb-smp-2cores = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a72
> > +# ARCH: arm64
> > +# BOARD: nxp_ls1046ardb_smp_2cores
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nxp_ls1046ardb_smp_2cores"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-
> 4cores.conf b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-
> 4cores.conf
> > new file mode 100755
> > index 0000000..41ab288
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb-smp-4cores.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nxp-ls1046ardb-smp-4cores
> > +#@DESCRIPTION: Machine configuration for nxp-ls1046ardb-smp-4cores ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nxp-ls1046ardb-smp-4cores = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a72
> > +# ARCH: arm64
> > +# BOARD: nxp_ls1046ardb_smp_4cores
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nxp_ls1046ardb_smp_4cores"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb.conf b/meta-
> zephyr-bsp/conf/machine/nxp-ls1046ardb.conf
> > new file mode 100755
> > index 0000000..37b4e58
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/nxp-ls1046ardb.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: nxp-ls1046ardb
> > +#@DESCRIPTION: Machine configuration for nxp-ls1046ardb , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_nxp-ls1046ardb = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a72
> > +# ARCH: arm64
> > +# BOARD: nxp_ls1046ardb
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "nxp_ls1046ardb"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-e407.conf
> b/meta-zephyr-bsp/conf/machine/olimex-stm32-e407.conf
> > new file mode 100755
> > index 0000000..782f341
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-e407.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: olimex-stm32-e407
> > +#@DESCRIPTION: Machine configuration for olimex-stm32-e407 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_olimex-stm32-e407 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: olimex_stm32_e407
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000"
> > +
> > +ZEPHYR_BOARD = "olimex_stm32_e407"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-h103.conf
> b/meta-zephyr-bsp/conf/machine/olimex-stm32-h103.conf
> > new file mode 100755
> > index 0000000..f492f77
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-h103.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: olimex-stm32-h103
> > +#@DESCRIPTION: Machine configuration for olimex-stm32-h103 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_olimex-stm32-h103 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: olimex_stm32_h103
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "olimex_stm32_h103"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-h407.conf
> b/meta-zephyr-bsp/conf/machine/olimex-stm32-h407.conf
> > new file mode 100755
> > index 0000000..9ac884b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-h407.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: olimex-stm32-h407
> > +#@DESCRIPTION: Machine configuration for olimex-stm32-h407 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_olimex-stm32-h407 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: olimex_stm32_h407
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000"
> > +
> > +ZEPHYR_BOARD = "olimex_stm32_h407"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/olimex-stm32-p405.conf
> b/meta-zephyr-bsp/conf/machine/olimex-stm32-p405.conf
> > new file mode 100755
> > index 0000000..11db9a2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/olimex-stm32-p405.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: olimex-stm32-p405
> > +#@DESCRIPTION: Machine configuration for olimex-stm32-p405 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_olimex-stm32-p405 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: olimex_stm32_p405
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F405xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "olimex_stm32_p405"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/olimexino-stm32.conf b/meta-
> zephyr-bsp/conf/machine/olimexino-stm32.conf
> > new file mode 100755
> > index 0000000..33cd43d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/olimexino-stm32.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: olimexino-stm32
> > +#@DESCRIPTION: Machine configuration for olimexino-stm32 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_olimexino-stm32 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: olimexino_stm32
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "olimexino_stm32"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/particle-argon.conf b/meta-
> zephyr-bsp/conf/machine/particle-argon.conf
> > new file mode 100755
> > index 0000000..fe22012
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/particle-argon.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: particle-argon
> > +#@DESCRIPTION: Machine configuration for particle-argon , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_particle-argon = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: particle_argon
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "particle_argon"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/particle-boron.conf b/meta-
> zephyr-bsp/conf/machine/particle-boron.conf
> > new file mode 100755
> > index 0000000..3c2853c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/particle-boron.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: particle-boron
> > +#@DESCRIPTION: Machine configuration for particle-boron , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_particle-boron = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: particle_boron
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "particle_boron"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/particle-xenon.conf b/meta-
> zephyr-bsp/conf/machine/particle-xenon.conf
> > new file mode 100755
> > index 0000000..8adcd1f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/particle-xenon.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: particle-xenon
> > +#@DESCRIPTION: Machine configuration for particle-xenon , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_particle-xenon = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: particle_xenon
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "particle_xenon"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/pico-pi-m4.conf b/meta-
> zephyr-bsp/conf/machine/pico-pi-m4.conf
> > new file mode 100755
> > index 0000000..6019337
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/pico-pi-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: pico-pi-m4
> > +#@DESCRIPTION: Machine configuration for pico-pi-m4 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_pico-pi-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: pico_pi_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "pico_pi_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/pinetime-devkit0.conf b/meta-
> zephyr-bsp/conf/machine/pinetime-devkit0.conf
> > new file mode 100755
> > index 0000000..0e6a7b7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/pinetime-devkit0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: pinetime-devkit0
> > +#@DESCRIPTION: Machine configuration for pinetime-devkit0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_pinetime-devkit0 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: pinetime_devkit0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "pinetime_devkit0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/pinnacle-100-dvk.conf b/meta-
> zephyr-bsp/conf/machine/pinnacle-100-dvk.conf
> > new file mode 100755
> > index 0000000..11b8e60
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/pinnacle-100-dvk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: pinnacle-100-dvk
> > +#@DESCRIPTION: Machine configuration for pinnacle-100-dvk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_pinnacle-100-dvk = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: pinnacle_100_dvk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "pinnacle_100_dvk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-arc-em.conf b/meta-
> zephyr-bsp/conf/machine/qemu-arc-em.conf
> > new file mode 100755
> > index 0000000..4bbe803
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-arc-em.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-arc-em
> > +#@DESCRIPTION: Machine configuration for qemu-arc-em , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-arc-em = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: arcem
> > +# ARCH: arc
> > +# BOARD: qemu_arc_em
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_arc_em"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf b/meta-
> zephyr-bsp/conf/machine/qemu-arc-hs.conf
> > new file mode 100755
> > index 0000000..10632a2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-arc-hs.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-arc-hs
> > +#@DESCRIPTION: Machine configuration for qemu-arc-hs , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-arc-hs = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: archs
> > +# ARCH: arc
> > +# BOARD: qemu_arc_hs
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_arc_hs"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-arc-hs6x.conf b/meta-
> zephyr-bsp/conf/machine/qemu-arc-hs6x.conf
> > new file mode 100755
> > index 0000000..2649946
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-arc-hs6x.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-arc-hs6x
> > +#@DESCRIPTION: Machine configuration for qemu-arc-hs6x , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-arc-hs6x = "arc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: arc64
> > +# ARCH: arc
> > +# BOARD: qemu_arc_hs6x
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_arc_hs6x"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-smp.conf
> b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-smp.conf
> > new file mode 100755
> > index 0000000..c332358
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-smp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-cortex-a53-smp
> > +#@DESCRIPTION: Machine configuration for qemu-cortex-a53-smp ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-cortex-a53-smp = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a53
> > +# ARCH: arm64
> > +# BOARD: qemu_cortex_a53_smp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_cortex_a53_smp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-xip.conf
> b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-xip.conf
> > new file mode 100755
> > index 0000000..8708a35
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53-xip.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-cortex-a53-xip
> > +#@DESCRIPTION: Machine configuration for qemu-cortex-a53-xip , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-cortex-a53-xip = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a53
> > +# ARCH: arm64
> > +# BOARD: qemu_cortex_a53_xip
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_cortex_a53_xip"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-a53.conf b/meta-
> zephyr-bsp/conf/machine/qemu-cortex-a53.conf
> > new file mode 100755
> > index 0000000..a78fd5a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-a53.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-cortex-a53
> > +#@DESCRIPTION: Machine configuration for qemu-cortex-a53 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-cortex-a53 = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a53
> > +# ARCH: arm64
> > +# BOARD: qemu_cortex_a53
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_cortex_a53"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-m0.conf b/meta-
> zephyr-bsp/conf/machine/qemu-cortex-m0.conf
> > new file mode 100755
> > index 0000000..efc12a4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-m0.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-cortex-m0
> > +#@DESCRIPTION: Machine configuration for qemu-cortex-m0 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-cortex-m0 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: qemu_cortex_m0
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF51 -DNRF51422_XXAA"
> > +
> > +ZEPHYR_BOARD = "qemu_cortex_m0"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-cortex-r5.conf b/meta-
> zephyr-bsp/conf/machine/qemu-cortex-r5.conf
> > new file mode 100755
> > index 0000000..bf046e0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-cortex-r5.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-cortex-r5
> > +#@DESCRIPTION: Machine configuration for qemu-cortex-r5 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-cortex-r5 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexr5"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> r5
> > +# ARCH: arm
> > +# BOARD: qemu_cortex_r5
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "qemu_cortex_r5"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-leon3.conf b/meta-
> zephyr-bsp/conf/machine/qemu-leon3.conf
> > new file mode 100755
> > index 0000000..ce2d957
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-leon3.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-leon3
> > +#@DESCRIPTION: Machine configuration for qemu-leon3 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-leon3 = "sparc"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: sparc
> > +# BOARD: qemu_leon3
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_leon3"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-riscv32-xip.conf b/meta-
> zephyr-bsp/conf/machine/qemu-riscv32-xip.conf
> > new file mode 100755
> > index 0000000..48f1192
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-riscv32-xip.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-riscv32-xip
> > +#@DESCRIPTION: Machine configuration for qemu-riscv32-xip , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-riscv32-xip = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: qemu_riscv32_xip
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_riscv32_xip"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-riscv32.conf b/meta-
> zephyr-bsp/conf/machine/qemu-riscv32.conf
> > new file mode 100755
> > index 0000000..437dfbb
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-riscv32.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-riscv32
> > +#@DESCRIPTION: Machine configuration for qemu-riscv32 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-riscv32 = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: qemu_riscv32
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_riscv32"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-riscv64.conf b/meta-
> zephyr-bsp/conf/machine/qemu-riscv64.conf
> > new file mode 100755
> > index 0000000..9480ad5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-riscv64.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-riscv64
> > +#@DESCRIPTION: Machine configuration for qemu-riscv64 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-riscv64 = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: qemu_riscv64
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_riscv64"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-64-nokpti.conf
> b/meta-zephyr-bsp/conf/machine/qemu-x86-64-nokpti.conf
> > new file mode 100755
> > index 0000000..b7e32ee
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-64-nokpti.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-64-nokpti
> > +#@DESCRIPTION: Machine configuration for qemu-x86-64-nokpti , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-64-nokpti = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_64_nokpti
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_64_nokpti"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-64.conf b/meta-
> zephyr-bsp/conf/machine/qemu-x86-64.conf
> > new file mode 100755
> > index 0000000..a7bd354
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-64.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-64
> > +#@DESCRIPTION: Machine configuration for qemu-x86-64 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-64 = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_64
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_64"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-lakemont.conf
> b/meta-zephyr-bsp/conf/machine/qemu-x86-lakemont.conf
> > new file mode 100755
> > index 0000000..7483f29
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-lakemont.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-lakemont
> > +#@DESCRIPTION: Machine configuration for qemu-x86-lakemont , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-lakemont = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_lakemont
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_lakemont"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-nokpti.conf b/meta-
> zephyr-bsp/conf/machine/qemu-x86-nokpti.conf
> > new file mode 100755
> > index 0000000..25fa908
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-nokpti.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-nokpti
> > +#@DESCRIPTION: Machine configuration for qemu-x86-nokpti , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-nokpti = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_nokpti
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_nokpti"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-nommu.conf
> b/meta-zephyr-bsp/conf/machine/qemu-x86-nommu.conf
> > new file mode 100755
> > index 0000000..0736ada
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-nommu.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-nommu
> > +#@DESCRIPTION: Machine configuration for qemu-x86-nommu , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-nommu = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_nommu
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_nommu"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-nopae.conf b/meta-
> zephyr-bsp/conf/machine/qemu-x86-nopae.conf
> > new file mode 100755
> > index 0000000..3cffc87
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-nopae.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-nopae
> > +#@DESCRIPTION: Machine configuration for qemu-x86-nopae , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-nopae = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_nopae
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_nopae"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-tiny.conf b/meta-
> zephyr-bsp/conf/machine/qemu-x86-tiny.conf
> > new file mode 100755
> > index 0000000..edbc9c7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-tiny.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-tiny
> > +#@DESCRIPTION: Machine configuration for qemu-x86-tiny , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-tiny = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_tiny
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_tiny"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-virt.conf b/meta-
> zephyr-bsp/conf/machine/qemu-x86-virt.conf
> > new file mode 100755
> > index 0000000..8db6640
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-virt.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-virt
> > +#@DESCRIPTION: Machine configuration for qemu-x86-virt , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-virt = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_virt
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_virt"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-x86-xip.conf b/meta-
> zephyr-bsp/conf/machine/qemu-x86-xip.conf
> > new file mode 100755
> > index 0000000..b4a2d2a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-x86-xip.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-x86-xip
> > +#@DESCRIPTION: Machine configuration for qemu-x86-xip , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-x86-xip = "x86"
> > +
> > +DEFAULTUNE ?= "core2-32"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: qemu_x86_xip
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_x86_xip"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/qemu-xtensa.conf b/meta-
> zephyr-bsp/conf/machine/qemu-xtensa.conf
> > new file mode 100755
> > index 0000000..a664b42
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/qemu-xtensa.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: qemu-xtensa
> > +#@DESCRIPTION: Machine configuration for qemu-xtensa , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_qemu-xtensa = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: qemu_xtensa
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "qemu_xtensa"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/quick-feather.conf b/meta-
> zephyr-bsp/conf/machine/quick-feather.conf
> > new file mode 100755
> > index 0000000..d2af1e5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/quick-feather.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: quick-feather
> > +#@DESCRIPTION: Machine configuration for quick-feather , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_quick-feather = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: quick_feather
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "quick_feather"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/rak4631-nrf52840.conf b/meta-
> zephyr-bsp/conf/machine/rak4631-nrf52840.conf
> > new file mode 100755
> > index 0000000..286c003
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/rak4631-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: rak4631-nrf52840
> > +#@DESCRIPTION: Machine configuration for rak4631-nrf52840 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_rak4631-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: rak4631_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "rak4631_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/rak5010-nrf52840.conf b/meta-
> zephyr-bsp/conf/machine/rak5010-nrf52840.conf
> > new file mode 100755
> > index 0000000..035f9ce
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/rak5010-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: rak5010-nrf52840
> > +#@DESCRIPTION: Machine configuration for rak5010-nrf52840 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_rak5010-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: rak5010_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "rak5010_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf b/meta-
> zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf
> > new file mode 100755
> > index 0000000..2098895
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/rcar-h3ulcb-cr7.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: rcar-h3ulcb-cr7
> > +#@DESCRIPTION: Machine configuration for rcar-h3ulcb-cr7 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_rcar-h3ulcb-cr7 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexr7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> r7
> > +# ARCH: arm
> > +# BOARD: rcar_h3ulcb_cr7
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "rcar_h3ulcb_cr7"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/reel-board-v2.conf b/meta-
> zephyr-bsp/conf/machine/reel-board-v2.conf
> > new file mode 100755
> > index 0000000..5db4d78
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/reel-board-v2.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: reel-board-v2
> > +#@DESCRIPTION: Machine configuration for reel-board-v2 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_reel-board-v2 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: reel_board_v2
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "reel_board_v2"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/reel-board.conf b/meta-
> zephyr-bsp/conf/machine/reel-board.conf
> > new file mode 100755
> > index 0000000..9528b52
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/reel-board.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: reel-board
> > +#@DESCRIPTION: Machine configuration for reel-board , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_reel-board = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: reel_board
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "reel_board"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ronoth-lodev.conf b/meta-
> zephyr-bsp/conf/machine/ronoth-lodev.conf
> > new file mode 100755
> > index 0000000..28468f0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ronoth-lodev.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ronoth-lodev
> > +#@DESCRIPTION: Machine configuration for ronoth-lodev , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ronoth-lodev = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: ronoth_lodev
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L073xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "ronoth_lodev"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf b/meta-
> zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf
> > new file mode 100755
> > index 0000000..4a64e7c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ruuvi-ruuvitag.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ruuvi-ruuvitag
> > +#@DESCRIPTION: Machine configuration for ruuvi-ruuvitag , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ruuvi-ruuvitag = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ruuvi_ruuvitag
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "ruuvi_ruuvitag"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/rv32m1-vega-ri5cy.conf
> b/meta-zephyr-bsp/conf/machine/rv32m1-vega-ri5cy.conf
> > new file mode 100755
> > index 0000000..547c846
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/rv32m1-vega-ri5cy.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: rv32m1-vega-ri5cy
> > +#@DESCRIPTION: Machine configuration for rv32m1-vega-ri5cy , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_rv32m1-vega-ri5cy = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: rv32m1_vega_ri5cy
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> DCPU_RV32M1_ri5cy -DXCVR_GENFSK_ENABLED"
> > +
> > +ZEPHYR_BOARD = "rv32m1_vega_ri5cy"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-riscy.conf
> b/meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-riscy.conf
> > new file mode 100755
> > index 0000000..5abc687
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/rv32m1-vega-zero-riscy.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: rv32m1-vega-zero-riscy
> > +#@DESCRIPTION: Machine configuration for rv32m1-vega-zero-riscy ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_rv32m1-vega-zero-riscy = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: rv32m1_vega_zero_riscy
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> DCPU_RV32M1_zero_riscy -DXCVR_GENFSK_ENABLED"
> > +
> > +ZEPHYR_BOARD = "rv32m1_vega_zero_riscy"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam-e70-xplained.conf
> b/meta-zephyr-bsp/conf/machine/sam-e70-xplained.conf
> > new file mode 100755
> > index 0000000..d4d81aa
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam-e70-xplained.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam-e70-xplained
> > +#@DESCRIPTION: Machine configuration for sam-e70-xplained , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam-e70-xplained = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: sam_e70_xplained
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam_e70_xplained"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam-e70b-xplained.conf
> b/meta-zephyr-bsp/conf/machine/sam-e70b-xplained.conf
> > new file mode 100755
> > index 0000000..6169e37
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam-e70b-xplained.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam-e70b-xplained
> > +#@DESCRIPTION: Machine configuration for sam-e70b-xplained , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam-e70b-xplained = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: sam_e70b_xplained
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam_e70b_xplained"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam-v71-xult.conf b/meta-
> zephyr-bsp/conf/machine/sam-v71-xult.conf
> > new file mode 100755
> > index 0000000..0c3250e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam-v71-xult.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam-v71-xult
> > +#@DESCRIPTION: Machine configuration for sam-v71-xult , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam-v71-xult = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: sam_v71_xult
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam_v71_xult"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam-v71b-xult.conf b/meta-
> zephyr-bsp/conf/machine/sam-v71b-xult.conf
> > new file mode 100755
> > index 0000000..1034b68
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam-v71b-xult.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam-v71b-xult
> > +#@DESCRIPTION: Machine configuration for sam-v71b-xult , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam-v71b-xult = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: sam_v71b_xult
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam_v71b_xult"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam4e-xpro.conf b/meta-
> zephyr-bsp/conf/machine/sam4e-xpro.conf
> > new file mode 100755
> > index 0000000..e71ffc5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam4e-xpro.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam4e-xpro
> > +#@DESCRIPTION: Machine configuration for sam4e-xpro , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam4e-xpro = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: sam4e_xpro
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam4e_xpro"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam4l-ek.conf b/meta-zephyr-
> bsp/conf/machine/sam4l-ek.conf
> > new file mode 100755
> > index 0000000..23ed071
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam4l-ek.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam4l-ek
> > +#@DESCRIPTION: Machine configuration for sam4l-ek , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam4l-ek = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: sam4l_ek
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam4l_ek"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sam4s-xplained.conf b/meta-
> zephyr-bsp/conf/machine/sam4s-xplained.conf
> > new file mode 100755
> > index 0000000..89c727f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sam4s-xplained.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sam4s-xplained
> > +#@DESCRIPTION: Machine configuration for sam4s-xplained , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sam4s-xplained = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: sam4s_xplained
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "sam4s_xplained"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/seeeduino-xiao.conf b/meta-
> zephyr-bsp/conf/machine/seeeduino-xiao.conf
> > new file mode 100755
> > index 0000000..1f7b81e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/seeeduino-xiao.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: seeeduino-xiao
> > +#@DESCRIPTION: Machine configuration for seeeduino-xiao , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_seeeduino-xiao = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: seeeduino_xiao
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "seeeduino_xiao"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/segger-trb-stm32f407.conf
> b/meta-zephyr-bsp/conf/machine/segger-trb-stm32f407.conf
> > new file mode 100755
> > index 0000000..3ff8e20
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/segger-trb-stm32f407.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: segger-trb-stm32f407
> > +#@DESCRIPTION: Machine configuration for segger-trb-stm32f407 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_segger-trb-stm32f407 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: segger_trb_stm32f407
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=12000000"
> > +
> > +ZEPHYR_BOARD = "segger_trb_stm32f407"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sensortile-box.conf b/meta-
> zephyr-bsp/conf/machine/sensortile-box.conf
> > new file mode 100755
> > index 0000000..b41f126
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sensortile-box.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sensortile-box
> > +#@DESCRIPTION: Machine configuration for sensortile-box , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sensortile-box = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: sensortile_box
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L4R9xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000"
> > +
> > +ZEPHYR_BOARD = "sensortile_box"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/serpente.conf b/meta-zephyr-
> bsp/conf/machine/serpente.conf
> > new file mode 100755
> > index 0000000..de18f18
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/serpente.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: serpente
> > +#@DESCRIPTION: Machine configuration for serpente , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_serpente = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: serpente
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "serpente"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160-
> ns.conf b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160-
> ns.conf
> > new file mode 100755
> > index 0000000..39cc155
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160-
> ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sparkfun-thing-plus-nrf9160-ns
> > +#@DESCRIPTION: Machine configuration for sparkfun-thing-plus-nrf9160-
> ns , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sparkfun-thing-plus-nrf9160-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: sparkfun_thing_plus_nrf9160_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA -DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "sparkfun_thing_plus_nrf9160_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-
> nrf9160.conf b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-
> nrf9160.conf
> > new file mode 100755
> > index 0000000..7940fa6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/sparkfun-thing-plus-nrf9160.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: sparkfun-thing-plus-nrf9160
> > +#@DESCRIPTION: Machine configuration for sparkfun-thing-plus-nrf9160 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_sparkfun-thing-plus-nrf9160 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: sparkfun_thing_plus_nrf9160
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF9160_XXAA"
> > +
> > +ZEPHYR_BOARD = "sparkfun_thing_plus_nrf9160"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/steval-fcu001v1.conf b/meta-
> zephyr-bsp/conf/machine/steval-fcu001v1.conf
> > new file mode 100755
> > index 0000000..1e058e5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/steval-fcu001v1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: steval-fcu001v1
> > +#@DESCRIPTION: Machine configuration for steval-fcu001v1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_steval-fcu001v1 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: steval_fcu001v1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F401xC -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=16000000"
> > +
> > +ZEPHYR_BOARD = "steval_fcu001v1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32-min-dev-black.conf
> b/meta-zephyr-bsp/conf/machine/stm32-min-dev-black.conf
> > new file mode 100755
> > index 0000000..e3348a4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32-min-dev-black.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32-min-dev-black
> > +#@DESCRIPTION: Machine configuration for stm32-min-dev-black , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32-min-dev-black = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: stm32_min_dev_black
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32_min_dev_black"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32-min-dev-blue.conf
> b/meta-zephyr-bsp/conf/machine/stm32-min-dev-blue.conf
> > new file mode 100755
> > index 0000000..1fbb5b0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32-min-dev-blue.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32-min-dev-blue
> > +#@DESCRIPTION: Machine configuration for stm32-min-dev-blue , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32-min-dev-blue = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: stm32_min_dev_blue
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32_min_dev_blue"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm3210c-eval.conf b/meta-
> zephyr-bsp/conf/machine/stm3210c-eval.conf
> > new file mode 100755
> > index 0000000..c60e849
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm3210c-eval.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm3210c-eval
> > +#@DESCRIPTION: Machine configuration for stm3210c-eval , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm3210c-eval = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: stm3210c_eval
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F107xC -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm3210c_eval"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32373c-eval.conf b/meta-
> zephyr-bsp/conf/machine/stm32373c-eval.conf
> > new file mode 100755
> > index 0000000..fe6b130
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32373c-eval.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32373c-eval
> > +#@DESCRIPTION: Machine configuration for stm32373c-eval , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32373c-eval = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32373c_eval
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F373xC -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32373c_eval"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f0-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f0-disco.conf
> > new file mode 100755
> > index 0000000..8b95d40
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f0-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f0-disco
> > +#@DESCRIPTION: Machine configuration for stm32f0-disco , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f0-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: stm32f0_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F051x8 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f0_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f030-demo.conf b/meta-
> zephyr-bsp/conf/machine/stm32f030-demo.conf
> > new file mode 100755
> > index 0000000..852c174
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f030-demo.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f030-demo
> > +#@DESCRIPTION: Machine configuration for stm32f030-demo , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f030-demo = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: stm32f030_demo
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F030x6 -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f030_demo"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f072-eval.conf b/meta-
> zephyr-bsp/conf/machine/stm32f072-eval.conf
> > new file mode 100755
> > index 0000000..a4ffaa5
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f072-eval.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f072-eval
> > +#@DESCRIPTION: Machine configuration for stm32f072-eval , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f072-eval = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: stm32f072_eval
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F072xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f072_eval"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f072b-disco.conf
> b/meta-zephyr-bsp/conf/machine/stm32f072b-disco.conf
> > new file mode 100755
> > index 0000000..1500e02
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f072b-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f072b-disco
> > +#@DESCRIPTION: Machine configuration for stm32f072b-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f072b-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0
> > +# ARCH: arm
> > +# BOARD: stm32f072b_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F072xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f072b_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f103-mini.conf b/meta-
> zephyr-bsp/conf/machine/stm32f103-mini.conf
> > new file mode 100755
> > index 0000000..3aab904
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f103-mini.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f103-mini
> > +#@DESCRIPTION: Machine configuration for stm32f103-mini , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f103-mini = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: stm32f103_mini
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f103_mini"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f3-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f3-disco.conf
> > new file mode 100755
> > index 0000000..68d4ad0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f3-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f3-disco
> > +#@DESCRIPTION: Machine configuration for stm32f3-disco , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f3-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32f3_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F303xC -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f3_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f4-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f4-disco.conf
> > new file mode 100755
> > index 0000000..f7fb1ad
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f4-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f4-disco
> > +#@DESCRIPTION: Machine configuration for stm32f4-disco , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f4-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32f4_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F407xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f4_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f411e-disco.conf
> b/meta-zephyr-bsp/conf/machine/stm32f411e-disco.conf
> > new file mode 100755
> > index 0000000..29494b4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f411e-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f411e-disco
> > +#@DESCRIPTION: Machine configuration for stm32f411e-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f411e-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32f411e_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F411xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f411e_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f412g-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f412g-disco.conf
> > new file mode 100755
> > index 0000000..6839c05
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f412g-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f412g-disco
> > +#@DESCRIPTION: Machine configuration for stm32f412g-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f412g-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32f412g_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F412Zx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f412g_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f429i-disc1.conf b/meta-
> zephyr-bsp/conf/machine/stm32f429i-disc1.conf
> > new file mode 100755
> > index 0000000..1151ef9
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f429i-disc1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f429i-disc1
> > +#@DESCRIPTION: Machine configuration for stm32f429i-disc1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f429i-disc1 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32f429i_disc1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F429xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f429i_disc1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f469i-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f469i-disco.conf
> > new file mode 100755
> > index 0000000..c41e23c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f469i-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f469i-disco
> > +#@DESCRIPTION: Machine configuration for stm32f469i-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f469i-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32f469i_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F469xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32f469i_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f723e-disco.conf
> b/meta-zephyr-bsp/conf/machine/stm32f723e-disco.conf
> > new file mode 100755
> > index 0000000..b465307
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f723e-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f723e-disco
> > +#@DESCRIPTION: Machine configuration for stm32f723e-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f723e-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: stm32f723e_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F723xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "stm32f723e_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f746g-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f746g-disco.conf
> > new file mode 100755
> > index 0000000..d8a4800
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f746g-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f746g-disco
> > +#@DESCRIPTION: Machine configuration for stm32f746g-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f746g-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: stm32f746g_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F746xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "stm32f746g_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32f769i-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32f769i-disco.conf
> > new file mode 100755
> > index 0000000..290366b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32f769i-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32f769i-disco
> > +#@DESCRIPTION: Machine configuration for stm32f769i-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32f769i-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: stm32f769i_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F769xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "stm32f769i_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32g0316-disco.conf
> b/meta-zephyr-bsp/conf/machine/stm32g0316-disco.conf
> > new file mode 100755
> > index 0000000..e0d3102
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32g0316-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32g0316-disco
> > +#@DESCRIPTION: Machine configuration for stm32g0316-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32g0316-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: stm32g0316_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32G031xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32g0316_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32g071b-disco.conf
> b/meta-zephyr-bsp/conf/machine/stm32g071b-disco.conf
> > new file mode 100755
> > index 0000000..33a7e3e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32g071b-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32g071b-disco
> > +#@DESCRIPTION: Machine configuration for stm32g071b-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32g071b-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm0plus"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m0plus
> > +# ARCH: arm
> > +# BOARD: stm32g071b_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32G071xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32g071b_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32h735g-disco.conf
> b/meta-zephyr-bsp/conf/machine/stm32h735g-disco.conf
> > new file mode 100755
> > index 0000000..391175a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32h735g-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32h735g-disco
> > +#@DESCRIPTION: Machine configuration for stm32h735g-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32h735g-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: stm32h735g_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H735xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "stm32h735g_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m4.conf
> b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m4.conf
> > new file mode 100755
> > index 0000000..7e90cd0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32h747i-disco-m4
> > +#@DESCRIPTION: Machine configuration for stm32h747i-disco-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32h747i-disco-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32h747i_disco_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H747xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32h747i_disco_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m7.conf
> b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m7.conf
> > new file mode 100755
> > index 0000000..659586d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32h747i-disco-m7.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32h747i-disco-m7
> > +#@DESCRIPTION: Machine configuration for stm32h747i-disco-m7 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32h747i-disco-m7 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: stm32h747i_disco_m7
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32H747xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM7 -DHSE_VALUE=25000000"
> > +
> > +ZEPHYR_BOARD = "stm32h747i_disco_m7"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32l1-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32l1-disco.conf
> > new file mode 100755
> > index 0000000..5e98c44
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32l1-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32l1-disco
> > +#@DESCRIPTION: Machine configuration for stm32l1-disco , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32l1-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: stm32l1_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L151xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32l1_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32l476g-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32l476g-disco.conf
> > new file mode 100755
> > index 0000000..d0249ae
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32l476g-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32l476g-disco
> > +#@DESCRIPTION: Machine configuration for stm32l476g-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32l476g-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32l476g_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L476xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32l476g_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32l496g-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32l496g-disco.conf
> > new file mode 100755
> > index 0000000..3e79086
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32l496g-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32l496g-disco
> > +#@DESCRIPTION: Machine configuration for stm32l496g-disco , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32l496g-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: stm32l496g_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L496xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DCORE_CM4 -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32l496g_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32l562e-dk-ns.conf
> b/meta-zephyr-bsp/conf/machine/stm32l562e-dk-ns.conf
> > new file mode 100755
> > index 0000000..3e7fbac
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32l562e-dk-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32l562e-dk-ns
> > +#@DESCRIPTION: Machine configuration for stm32l562e-dk-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32l562e-dk-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: stm32l562e_dk_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L562xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32l562e_dk_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32l562e-dk.conf b/meta-
> zephyr-bsp/conf/machine/stm32l562e-dk.conf
> > new file mode 100755
> > index 0000000..1793676
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32l562e-dk.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32l562e-dk
> > +#@DESCRIPTION: Machine configuration for stm32l562e-dk , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32l562e-dk = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: stm32l562e_dk
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32L562xx -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32l562e_dk"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/stm32vl-disco.conf b/meta-
> zephyr-bsp/conf/machine/stm32vl-disco.conf
> > new file mode 100755
> > index 0000000..9bf439d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/stm32vl-disco.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: stm32vl-disco
> > +#@DESCRIPTION: Machine configuration for stm32vl-disco , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_stm32vl-disco = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: stm32vl_disco
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F100xB -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "stm32vl_disco"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/teensy40.conf b/meta-zephyr-
> bsp/conf/machine/teensy40.conf
> > new file mode 100755
> > index 0000000..a1ca582
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/teensy40.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: teensy40
> > +#@DESCRIPTION: Machine configuration for teensy40 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_teensy40 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: teensy40
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1062DVL6A -
> DXIP_BOOT_HEADER_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "teensy40"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/teensy41.conf b/meta-zephyr-
> bsp/conf/machine/teensy41.conf
> > new file mode 100755
> > index 0000000..5469104
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/teensy41.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: teensy41
> > +#@DESCRIPTION: Machine configuration for teensy41 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_teensy41 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: teensy41
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MIMXRT1062DVJ6A -
> DXIP_BOOT_HEADER_ENABLE=1 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "teensy41"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/thingy52-nrf52832.conf
> b/meta-zephyr-bsp/conf/machine/thingy52-nrf52832.conf
> > new file mode 100755
> > index 0000000..a40d44f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/thingy52-nrf52832.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: thingy52-nrf52832
> > +#@DESCRIPTION: Machine configuration for thingy52-nrf52832 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_thingy52-nrf52832 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: thingy52_nrf52832
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "thingy52_nrf52832"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp-
> ns.conf b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp-ns.conf
> > new file mode 100755
> > index 0000000..fe583f4
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: thingy53-nrf5340-cpuapp-ns
> > +#@DESCRIPTION: Machine configuration for thingy53-nrf5340-cpuapp-ns ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_thingy53-nrf5340-cpuapp-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: thingy53_nrf5340_cpuapp_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_APPLICATION -
> DNRF_TRUSTZONE_NONSECURE"
> > +
> > +ZEPHYR_BOARD = "thingy53_nrf5340_cpuapp_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp.conf
> b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp.conf
> > new file mode 100755
> > index 0000000..a835bc6
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpuapp.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: thingy53-nrf5340-cpuapp
> > +#@DESCRIPTION: Machine configuration for thingy53-nrf5340-cpuapp ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_thingy53-nrf5340-cpuapp = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-maine"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33
> > +# ARCH: arm
> > +# BOARD: thingy53_nrf5340_cpuapp
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_APPLICATION"
> > +
> > +ZEPHYR_BOARD = "thingy53_nrf5340_cpuapp"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpunet.conf
> b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpunet.conf
> > new file mode 100755
> > index 0000000..96ce13f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/thingy53-nrf5340-cpunet.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: thingy53-nrf5340-cpunet
> > +#@DESCRIPTION: Machine configuration for thingy53-nrf5340-cpunet ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_thingy53-nrf5340-cpunet = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: thingy53_nrf5340_cpunet
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF5340_XXAA_NETWORK"
> > +
> > +ZEPHYR_BOARD = "thingy53_nrf5340_cpunet"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/tlsr9518adk80d.conf b/meta-
> zephyr-bsp/conf/machine/tlsr9518adk80d.conf
> > new file mode 100755
> > index 0000000..b2fc8f0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/tlsr9518adk80d.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: tlsr9518adk80d
> > +#@DESCRIPTION: Machine configuration for tlsr9518adk80d , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_tlsr9518adk80d = "riscv"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: riscv
> > +# BOARD: tlsr9518adk80d
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "tlsr9518adk80d"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/twr-ke18f.conf b/meta-
> zephyr-bsp/conf/machine/twr-ke18f.conf
> > new file mode 100755
> > index 0000000..f037f0e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/twr-ke18f.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: twr-ke18f
> > +#@DESCRIPTION: Machine configuration for twr-ke18f , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_twr-ke18f = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: twr_ke18f
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MKE18F512VLL16 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "twr_ke18f"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/twr-kv58f220m.conf b/meta-
> zephyr-bsp/conf/machine/twr-kv58f220m.conf
> > new file mode 100755
> > index 0000000..bdaeb2b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/twr-kv58f220m.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: twr-kv58f220m
> > +#@DESCRIPTION: Machine configuration for twr-kv58f220m , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_twr-kv58f220m = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm7"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m7
> > +# ARCH: arm
> > +# BOARD: twr_kv58f220m
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MKV58F1M0VLQ24 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "twr_kv58f220m"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd300eval-nrf52832.conf
> b/meta-zephyr-bsp/conf/machine/ubx-bmd300eval-nrf52832.conf
> > new file mode 100755
> > index 0000000..2288d05
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd300eval-nrf52832.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-bmd300eval-nrf52832
> > +#@DESCRIPTION: Machine configuration for ubx-bmd300eval-nrf52832 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-bmd300eval-nrf52832 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_bmd300eval_nrf52832
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_bmd300eval_nrf52832"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd330eval-nrf52810.conf
> b/meta-zephyr-bsp/conf/machine/ubx-bmd330eval-nrf52810.conf
> > new file mode 100755
> > index 0000000..db66a8a
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd330eval-nrf52810.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-bmd330eval-nrf52810
> > +#@DESCRIPTION: Machine configuration for ubx-bmd330eval-nrf52810 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-bmd330eval-nrf52810 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_bmd330eval_nrf52810
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52810_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_bmd330eval_nrf52810"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd340eval-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/ubx-bmd340eval-nrf52840.conf
> > new file mode 100755
> > index 0000000..5b714e0
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd340eval-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-bmd340eval-nrf52840
> > +#@DESCRIPTION: Machine configuration for ubx-bmd340eval-nrf52840 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-bmd340eval-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_bmd340eval_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_bmd340eval_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd345eval-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/ubx-bmd345eval-nrf52840.conf
> > new file mode 100755
> > index 0000000..7cd456c
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd345eval-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-bmd345eval-nrf52840
> > +#@DESCRIPTION: Machine configuration for ubx-bmd345eval-nrf52840 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-bmd345eval-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_bmd345eval_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_bmd345eval_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd360eval-nrf52811.conf
> b/meta-zephyr-bsp/conf/machine/ubx-bmd360eval-nrf52811.conf
> > new file mode 100755
> > index 0000000..ba42a61
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd360eval-nrf52811.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-bmd360eval-nrf52811
> > +#@DESCRIPTION: Machine configuration for ubx-bmd360eval-nrf52811 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-bmd360eval-nrf52811 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_bmd360eval_nrf52811
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52811_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_bmd360eval_nrf52811"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-bmd380eval-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/ubx-bmd380eval-nrf52840.conf
> > new file mode 100755
> > index 0000000..7df59ca
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-bmd380eval-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-bmd380eval-nrf52840
> > +#@DESCRIPTION: Machine configuration for ubx-bmd380eval-nrf52840 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-bmd380eval-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_bmd380eval_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_bmd380eval_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkannab1-nrf52832.conf
> b/meta-zephyr-bsp/conf/machine/ubx-evkannab1-nrf52832.conf
> > new file mode 100755
> > index 0000000..da3352b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-evkannab1-nrf52832.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-evkannab1-nrf52832
> > +#@DESCRIPTION: Machine configuration for ubx-evkannab1-nrf52832 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-evkannab1-nrf52832 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_evkannab1_nrf52832
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_evkannab1_nrf52832"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkninab1-nrf52832.conf
> b/meta-zephyr-bsp/conf/machine/ubx-evkninab1-nrf52832.conf
> > new file mode 100755
> > index 0000000..c80bc65
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-evkninab1-nrf52832.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-evkninab1-nrf52832
> > +#@DESCRIPTION: Machine configuration for ubx-evkninab1-nrf52832 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-evkninab1-nrf52832 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_evkninab1_nrf52832
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52832_XXAA -DNRF52832_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_evkninab1_nrf52832"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkninab3-nrf52840.conf
> b/meta-zephyr-bsp/conf/machine/ubx-evkninab3-nrf52840.conf
> > new file mode 100755
> > index 0000000..af7cdef
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-evkninab3-nrf52840.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-evkninab3-nrf52840
> > +#@DESCRIPTION: Machine configuration for ubx-evkninab3-nrf52840 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-evkninab3-nrf52840 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_evkninab3_nrf52840
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52840_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_evkninab3_nrf52840"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/ubx-evkninab4-nrf52833.conf
> b/meta-zephyr-bsp/conf/machine/ubx-evkninab4-nrf52833.conf
> > new file mode 100755
> > index 0000000..f8c3c77
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/ubx-evkninab4-nrf52833.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: ubx-evkninab4-nrf52833
> > +#@DESCRIPTION: Machine configuration for ubx-evkninab4-nrf52833 ,
> build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_ubx-evkninab4-nrf52833 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: ubx_evkninab4_nrf52833
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DNRF52833_XXAA"
> > +
> > +ZEPHYR_BOARD = "ubx_evkninab4_nrf52833"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/udoo-neo-full-m4.conf
> b/meta-zephyr-bsp/conf/machine/udoo-neo-full-m4.conf
> > new file mode 100755
> > index 0000000..a518c7b
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/udoo-neo-full-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: udoo-neo-full-m4
> > +#@DESCRIPTION: Machine configuration for udoo-neo-full-m4 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_udoo-neo-full-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: udoo_neo_full_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "udoo_neo_full_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/up-squared.conf b/meta-
> zephyr-bsp/conf/machine/up-squared.conf
> > new file mode 100755
> > index 0000000..ce95c95
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/up-squared.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: up-squared
> > +#@DESCRIPTION: Machine configuration for up-squared , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_up-squared = "x86"
> > +
> > +DEFAULTUNE ?= "core2-64"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: x86
> > +# BOARD: up_squared
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "up_squared"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/usb-kw24d512.conf b/meta-
> zephyr-bsp/conf/machine/usb-kw24d512.conf
> > new file mode 100755
> > index 0000000..434f2bd
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/usb-kw24d512.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: usb-kw24d512
> > +#@DESCRIPTION: Machine configuration for usb-kw24d512 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_usb-kw24d512 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: usb_kw24d512
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DCPU_MKW24D512VHA5 -
> DBOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024 -DNDEBUG"
> > +
> > +ZEPHYR_BOARD = "usb_kw24d512"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/v2m-beetle.conf b/meta-
> zephyr-bsp/conf/machine/v2m-beetle.conf
> > new file mode 100755
> > index 0000000..b393ca2
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/v2m-beetle.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: v2m-beetle
> > +#@DESCRIPTION: Machine configuration for v2m-beetle , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_v2m-beetle = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: v2m_beetle
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "v2m_beetle"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-b1-ns.conf
> b/meta-zephyr-bsp/conf/machine/v2m-musca-b1-ns.conf
> > new file mode 100755
> > index 0000000..202f732
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-b1-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: v2m-musca-b1-ns
> > +#@DESCRIPTION: Machine configuration for v2m-musca-b1-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_v2m-musca-b1-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: v2m_musca_b1_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "v2m_musca_b1_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-b1.conf b/meta-
> zephyr-bsp/conf/machine/v2m-musca-b1.conf
> > new file mode 100755
> > index 0000000..50de472
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-b1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: v2m-musca-b1
> > +#@DESCRIPTION: Machine configuration for v2m-musca-b1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_v2m-musca-b1 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: v2m_musca_b1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "v2m_musca_b1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-s1-ns.conf
> b/meta-zephyr-bsp/conf/machine/v2m-musca-s1-ns.conf
> > new file mode 100755
> > index 0000000..fe21fbe
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-s1-ns.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: v2m-musca-s1-ns
> > +#@DESCRIPTION: Machine configuration for v2m-musca-s1-ns , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_v2m-musca-s1-ns = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: v2m_musca_s1_ns
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "v2m_musca_s1_ns"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/v2m-musca-s1.conf b/meta-
> zephyr-bsp/conf/machine/v2m-musca-s1.conf
> > new file mode 100755
> > index 0000000..f935ec7
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/v2m-musca-s1.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: v2m-musca-s1
> > +#@DESCRIPTION: Machine configuration for v2m-musca-s1 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_v2m-musca-s1 = "arm"
> > +
> > +DEFAULTUNE ?= "armv8m-main"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m33+nodsp
> > +# ARCH: arm
> > +# BOARD: v2m_musca_s1
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "v2m_musca_s1"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/warp7-m4.conf b/meta-
> zephyr-bsp/conf/machine/warp7-m4.conf
> > new file mode 100755
> > index 0000000..acd00ad
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/warp7-m4.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: warp7-m4
> > +#@DESCRIPTION: Machine configuration for warp7-m4 , build: zephyr-
> v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_warp7-m4 = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: warp7_m4
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START"
> > +
> > +ZEPHYR_BOARD = "warp7_m4"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/waveshare-open103z.conf
> b/meta-zephyr-bsp/conf/machine/waveshare-open103z.conf
> > new file mode 100755
> > index 0000000..ac0f14f
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/waveshare-open103z.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: waveshare-open103z
> > +#@DESCRIPTION: Machine configuration for waveshare-open103z , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_waveshare-open103z = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm3"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m3
> > +# ARCH: arm
> > +# BOARD: waveshare_open103z
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DSTM32F103xE -DUSE_HAL_DRIVER -
> DUSE_FULL_LL_DRIVER -DHSE_VALUE=8000000"
> > +
> > +ZEPHYR_BOARD = "waveshare_open103z"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/xenvm.conf b/meta-zephyr-
> bsp/conf/machine/xenvm.conf
> > new file mode 100755
> > index 0000000..5d0fa54
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/xenvm.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: xenvm
> > +#@DESCRIPTION: Machine configuration for xenvm , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_xenvm = "arm64"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> a72
> > +# ARCH: arm64
> > +# BOARD: xenvm
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "xenvm"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/xmc45-relax-kit.conf b/meta-
> zephyr-bsp/conf/machine/xmc45-relax-kit.conf
> > new file mode 100755
> > index 0000000..e50a11e
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/xmc45-relax-kit.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: xmc45-relax-kit
> > +#@DESCRIPTION: Machine configuration for xmc45-relax-kit , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_xmc45-relax-kit = "arm"
> > +
> > +DEFAULTUNE ?= "cortexm4"
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU: cortex-
> m4
> > +# ARCH: arm
> > +# BOARD: xmc45_relax_kit
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1 -
> D__PROGRAM_START -DXMC4500_F100x1024 -DCORE_CM4"
> > +
> > +ZEPHYR_BOARD = "xmc45_relax_kit"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/xt-sim-intel-s1000.conf
> b/meta-zephyr-bsp/conf/machine/xt-sim-intel-s1000.conf
> > new file mode 100755
> > index 0000000..f76b983
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/xt-sim-intel-s1000.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: xt-sim-intel-s1000
> > +#@DESCRIPTION: Machine configuration for xt-sim-intel-s1000 , build:
> zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_xt-sim-intel-s1000 = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: xt-sim_intel_s1000
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "xt-sim_intel_s1000"
> > +
> > diff --git a/meta-zephyr-bsp/conf/machine/xt-sim.conf b/meta-zephyr-
> bsp/conf/machine/xt-sim.conf
> > new file mode 100755
> > index 0000000..a782a1d
> > --- /dev/null
> > +++ b/meta-zephyr-bsp/conf/machine/xt-sim.conf
> > @@ -0,0 +1,22 @@
> > +#@TYPE: Machine
> > +#@NAME: xt-sim
> > +#@DESCRIPTION: Machine configuration for xt-sim , build: zephyr-v2.7.1
> > +#
> > +# This file is autogenerated.
> > +
> > +ARCH_xt-sim = "xtensa"
> > +
> > +
> > +
> > +# We were unable to find a tuning for this board. # GCC_M_CPU:
> > +# ARCH: xtensa
> > +# BOARD: xt-sim
> > +
> > +
> > +# MACHINE_OVERRIDES based on default kconfig in zephyr
> > +
> > +
> > +#ZEPHYR_EXTRA_OECMAKE +=" -DKERNEL -D__ZEPHYR__=1 -
> D_FORTIFY_SOURCE=2 -DBUILD_VERSION=zephyr-v2.7.1"
> > +
> > +ZEPHYR_BOARD = "xt-sim"
> > +
> > --
> > 2.25.1
> >
> >
> >
> >
^ permalink raw reply [flat|nested] 2+ messages in thread