Re: [BUG] U-Boot makes Linux kernel boot failed with "mmc1: invalid bus width" on RPi 400 - Jian-Hong Pan

From: Jian-Hong Pan <jhp@endlessos.org>
To: Matthias Brugger <mbrugger@suse.com>,
	nsaenz@kernel.org, Stefan Wahren <stefan.wahren@i2se.com>
Cc: bcm-kernel-feedback-list@broadcom.com, u-boot@lists.denx.de,
	linux-rpi-kernel@lists.infradead.org, linux-mmc@vger.kernel.org,
	Linux Kernel <linux-kernel@vger.kernel.org>,
	linux@endlessos.org, devicetree <devicetree@vger.kernel.org>
Subject: Re: [BUG] U-Boot makes Linux kernel boot failed with "mmc1: invalid bus width" on RPi 400
Date: Mon, 19 Jul 2021 11:57:49 +0800	[thread overview]
Message-ID: <CAPpJ_eepsLfehv5xkk1Eu+LVrOZpU7-EBobuds3hsqSFzd6RGw@mail.gmail.com> (raw)
In-Reply-To: <CAPpJ_ecx4byFQ+SJL3ZgFyf1q2HvGfLHhdf1khM9Znib_8iwEw@mail.gmail.com>

Jian-Hong Pan <jhp@endlessos.org> 於 2021年7月7日 週三 下午12:23寫道：
>
> Hi,
>
> I tried to boot Linux next kernel at tag 5.13.0-next-20210701 from
> latest U-Boot at commit 1311dd37ec ("Merge branch
> '2021-07-01-update-CI-containers'") on Raspberry Pi 400.
> * U-Boot goes with the bcm2711-rpi-400.dtb from Raspberry Pi OS
> firmware at tag 1.20210527 [1].  U-Boot is built with the
> rpi_4_defconfig.
> * The Linux next kernel goes with the corresponding
> bcm2711-rpi-400.dtb at tag 5.13.0-next-20210701.
> However, the Linux kernel is stuck at failed mmc, which keeps showing
> "mmc1: invalid bus width":
>
> [    7.776752] mmc1: invalid bus width
> [    7.781398] mmc1: error -22 whilst initialising SD card
> [   17.891183] mmc1: Timeout waiting for hardware cmd interrupt.
> [   17.900265] mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
> [   17.910046] mmc1: sdhci: Sys addr:  0x00000000 | Version:  0x00001002
> [   17.919829] mmc1: sdhci: Blk size:  0x00000000 | Blk cnt:  0x00000000
> [   17.929595] mmc1: sdhci: Argument:  0x80000c08 | Trn mode: 0x00000000
> [   17.939337] mmc1: sdhci: Present:   0x1fff0001 | Host ctl: 0x00000001
> [   17.949092] mmc1: sdhci: Power:     0x0000000f | Blk gap:  0x00000080
> [   17.958827] mmc1: sdhci: Wake-up:   0x00000000 | Clock:    0x0000f447
> [   17.968531] mmc1: sdhci: Timeout:   0x00000000 | Int stat: 0x00000000
> [   17.978201] mmc1: sdhci: Int enab:  0x00ff1003 | Sig enab: 0x00ff1003
> [   17.987850] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
> [   17.997456] mmc1: sdhci: Caps:      0x45ee6432 | Caps_1:   0x0000a525
> [   18.007044] mmc1: sdhci: Cmd:       0x0000341a | Max curr: 0x00080008
> [   18.016622] mmc1: sdhci: Resp[0]:   0x00000000 | Resp[1]:  0x00000000
> [   18.026157] mmc1: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
> [   18.035650] mmc1: sdhci: Host ctl2: 0x00000000
> [   18.043066] mmc1: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x00000000
> [   18.052540] mmc1: sdhci: ============================================
> [   18.139162] mmc1: invalid bus width
> [   18.144682] mmc1: error -22 whilst initialising SD card
> [   19.498785] mmc1: invalid bus width
> [   19.503344] mmc1: error -22 whilst initialising SD card
>
> The full log can be foud at
> https://gist.github.com/starnight/dec6e6ee627f19c2d291f3ff973b06fa#file-uboot-kernel-log
>
> In Linux kernel, SD card driver checks the bus_width bits for
> validation [2] in mmc_decode_scr(). The value of bus_width comes from
> the resp, which is assigned from mmc_card's raw_scr.
> However, the values of resp[0..3] are 0, which means no
> SD_SCR_BUS_WIDTH_1, nor SD_SCR_BUS_WIDTH_4.
> After studied the call trace of mmc_decode_scr(), learned that
> mmc_sd_init_card() -> mmc_app_send_scr() gets and assigns mmc_card's
> raw_scr value [3] with "DMA" mechanism.
>
> Therefore, I try to boot the same Linux next kernel with the same
> corresponding bcm2711-rpi-400.dtb at tag 5.13.0-next-20210701
> directly, without u-boot.
> The system boots up and the mmc works correctly.  The full log can be
> found at https://gist.github.com/starnight/dec6e6ee627f19c2d291f3ff973b06fa#file-kernel-without-uboot-log
>
> Is there something special that should be done in U-Boot for Raspberry Pi 400?
>
> [1] https://github.com/raspberrypi/firmware/blob/1.20210527/boot/bcm2711-rpi-400.dtb
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/mmc/core/sd.c?h=next-20210701#n239
> [3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/mmc/core/sd_ops.c?h=next-20210701#n297

I notice that mainline kernel 5.14-rc* includes the Raspberry Pi 400
device tree commits.  So, I build latest kernel 5.14-rc2.  The kernel
still boot failed at "mmc1: invalid bus width" on RPi 400.

To make it easy to track, I filed this bug on kernel's bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=213753

BR.
Jian-Hong Pan